2nd Edition FiberGuide® Fibre Management Systems

Transcription

FiberGuide® Fibre Management Systems
2nd Edition
FibrE connectivity solutions
Table of Contents
Introduction ......................................................................................................................................1
Innovative Products . .....................................................................................................................3
System Description........................................................................................................................4
Features and Benefits . ..................................................................................................................5
Combining System Parts................................................................................................................6
Downspout Drop Options..............................................................................................................7
Express Exit™ Drop Options............................................................................................................8
Trumpet Flare Options....................................................................................................................9
4x24" Island T.............................................................................................................................10
Raceway Reconfigurations......................................................................................................11-12
Supporting Overhead Systems ...............................................................................................13-14
Patch Cord Densities
Recommended Patch Cord Densities............................................................................................16
Things to Consider When Ordering.........................................................................................17-18
Fittings........................................................................................................................................20
Downspouts and Attachments.....................................................................................................21
Straight Section and Junction.......................................................................................................22
2x6 System
Fittings, Downspouts and Attachments...................................................................................24-25
Straight Section and Junction..................................................................................................26-27
4x4 System
Fittings...................................................................................................................................30-31
Downspouts and Attachments................................................................................................32-33
Straight Section and Snap-Fit™ Junction..................................................................................34-35
4x6 System
•
Fittings...................................................................................................................................38-39
Straight Section and Snap-Fit Junction....................................................................................42-43
4x12 System
4x24 System
Fittings...................................................................................................................................46-47
Straight Section and Snap-Fit Junction....................................................................................50-51
Fittings........................................................................................................................................54
Downspouts and Attachments.....................................................................................................55
Straight Section and Snap-Fit Junction.........................................................................................56
Express Exit™ Family ..................................................................................................................58-60
www.adc.com/in
3
Table of Contents
2x2 System
06/10
401326IN
FiberGuide® Systems
Applications
Table of Contents
Vertical Slotted Duct Systems
2x2 and 2x1................................................................................................................................62
2x4 and 4x4................................................................................................................................63
Support Kits
Dimensional Drawings
2x2 System Parts.....................................................................................................................76-77
2x6 System Parts.....................................................................................................................78-79
4x4 System Parts.....................................................................................................................80-82
4x6 System Parts.....................................................................................................................83-84
4x12 System Parts .................................................................................................................85-87
4x24 System Parts...................................................................................................................88-89
Express Exit™ Parts.......................................................................................................................90
2x2 System Support Kits..............................................................................................................91
2x6, 4x4 and 4x6 System Support Kits....................................................................................92-93
4x12 System Support Kits............................................................................................................94
4x24 System Support Kits............................................................................................................95
Plenum FiberGuide® System
System Description.................................................................................................................98-99
Typical Installations....................................................................................................................100
Patch Cord Densities..................................................................................................................101
Plenum Express Exit System........................................................................................................102
2x2 System.........................................................................................................................104-105
4x6 System.........................................................................................................................106-107
4x12 System.......................................................................................................................108-109
Accessories................................................................................................................................110
Index......................................................................................................................................113-118
•
401326IN
Accessories ................................................................................................................................72-74
06/10
Table of Contents
2x2 System.............................................................................................................................66-67
2x6, 4x4, 4x6 Systems.................................................................................................................68
4x12 System................................................................................................................................69
4x24 System................................................................................................................................70
www.adc.com/in
4
Introduction
06/10
•
401326IN
FiberGuide® is a raceway system designed to protect and route fibre optic patch cords, multi-fibre cable
assemblies and intrafacility fibre cable (IFC) to and from fibre splice enclosures, fibre distribution frames
and fibre optic terminal devices. FiberGuide® ensures a two-inch minimum bend radius is maintained
throughout the system. Tool-less, Snap-Fit™ junctions, cover options
and Plenum Express Exit™ drops significantly reduce the amount of time
required for installation.
The FiberGuide® system is a complete set of products designed and
manufactured to ensure total off-frame protection and ease of use.
Basic components include horizontal and vertical straight sections,
horizontal and vertical elbows, downspouts, junctions and numerous
support hardware and flex-tube kits.
Available in a variety of sizes:
2x2 – Ideal for smaller installations or for vertical routing of a maximum
of four hundred 2 mm fibre optic patch cords. All 2x2 FiberGuide®
products are shipped with covers.
2x6 – Designed for height restricted environments, this robust
system provides the same support and system flexibility of the traditional
4-inch-high system while saving 2 inches of overhead space. It features
a maximum capacity of 1,200, 2 mm patch cords.
4x4 – Features the maximum capacity to support 1,600, 2 mm patch
cords. It has been engineered to allow straight sections to be
self-supporting over a span of up to 1.83 m (6 feet).
4x6 – Features the same benefits of the 4-inch system and a maximum
trough capacity of 2,400, 2 mm patch cords.
4x12 – The 12-inch-wide trough has a maximum capacity to support
nearly 5,000, 2 mm patch cords. Perfect for runs over fibre frame
lineups and perimeter routes.
4x24 – The 4x24-inch system is the ultimate raceway solution to
securely route and protect patch cords over high-density optical
distribution frames including ADC KRONE's Next Generation Frame
(NGF) and Next Generation 3 Frame (NG3®). Designed for maximum
capacity, this robust system provides the same support and flexibility as
www.adc.com/in
1
Introduction
The Industry's Most Comprehensive Optical Raceway System
ADC KRONE's FiberGuide® fibre management systems offer the greatest breadth of optical raceway
products in the industry. In response to customer requirements, ADC KRONE continues to innovate and
improve FiberGuide® systems, adding greater flexibility and driving down installation time to ensure a
smooth deployment.
A Variety of Solutions
FL1000
Wall Box
Intermediate FDF Solutions
(8" FCM)
FiberGuide®
Express Exit™
Vertical
FiberGuide®
6"
FMT Panel
6"
6"
12"
6"
6"
6"
FPL Panel
12"
Fibre Optic
Transport Lineup
Fibre Optic
Panel Solutions
(FOP)
24"
12"
High-Density
ODF Lineup
Solutions
(NGF, NG3®)
Cable Entrance
Solutions
(FEC)
Value-Added Module
(VAM) Solutions
(Monitors, Splitters, WDM, CWDM)
Fibre Cable Assembly
& Connector Solutions
(FCC)
Splice Vault
•
401326IN
FiberGuide®
Flex Tubing
RiserGuide
Fibre Raceway Solutions
(FGS)
Traditional
ODF Lineup
Solutions
(8" FCM, LSX)
FL2000
Panel
06/10
Introduction
Examples of FiberGuide® Integration
www.adc.com/in
2
Innovative Products
06/10
•
401326IN
Snap-Fit™ and Hinged Cover Options
To drive down valuable installation time, ADC KRONE provides
tool-less Snap-Fit™ and hinged cover options. Featuring simple,
durable molded hardware, these covers install in minutes and
require no tools. The hinged cover option provides easy access,
enabling installers and technicians to deploy the product quickly
and easily. In addition, the covers do not need to be fully opened
for maintenance.
Hinged Cover System
Snap-Fit Junction
ADC KRONE's Snap-Fit Junction is the industry's first and only
completely tool-less junction. No additional tools are needed for
installation or removal. Quick and easy to install, the FiberGuide®
Snap-Fit Junction saves valuable time and money.
Express Exits™
ADC KRONE features a number of innovative Express Exit™
options: Low profile, 2-inch and 4-inch options round out this
innovative product line, designed to meet your most demanding
network requirements. Plenum Express Exit™ systems are also
available. By simply securing an Express Exit™ to the sidewall of
a FiberGuide® straight section, jumpers can be permanently or
temporarily routed to the fibre optic terminal (FOT) equipment
or fibre frames. No cutting is required. Positioning a drop with a
member of the Express Exit™ family greatly simplifies installation,
protects the integrity of existing fibres and increases the overall
flexibility of the raceway system.
Raceway Reconfiguration Solutions
ADC KRONE offers two products to facilitate easy on-site raceway
reconfigurations. Available for the 4x4, 4x6, 4x12 and 4x24*
systems, the cut-in "T" and the expandable straight section offer the
required flexibility to optimize raceway systems in retrofit applications
without jeopardizing the integrity of existing cables.
Express Exit™ Family
Cut-in T
*Expandable straight section not available for 4x24 system.
www.adc.com/in
3
Introduction
ADC KRONE continues to add innovative products to FiberGuide®
fibre management systems to ensure they remain the most
comprehensive solutions for all optical raceway requirements and
applications. These products increase functionality and flexibility
and are compatible with existing raceway components.
System Description
Finished Product Meets
UL Requirement
FiberGuide® Straight Sections
(All FiberGuide® Systems)
Flame rated: UL94V-0
UL94V-0 and UL2024
FiberGuide® Molded Fittings
(All FiberGuide® Systems)
UL94V-0 and UL2024
FiberGuide® Flex Tube (2")
UL2024
FiberGuide® Flex Tube (1")
UL2024
FiberGuide® Flex Tube (7/8")
UL2024
Note: FiberGuide® flex tube complies with the National Electrical Code (NEC) Article 770-51 and Underwriters
Laboratory UL2024 requirements for General Purpose Fibre Optic Raceways.
•
401326IN
Raw Material Meets
UL Requirement
06/10
Introduction
FiberGuide® Materials Product Statement
The FiberGuide® fibre management system is a UL-listed (E151158) general purpose fibre optic raceway
system. All FiberGuide® products are manufactured from flame-retardant materials. No FiberGuide®
system parts contain PVC. The table summarizes the fire-resistant properties of FiberGuide® straight
sections, molded parts and flex tube.
www.adc.com/in
4
Introduction
Features and Benefits
Speed of Installation
FiberGuide® systems feature a variety of products that allow for quick and easy installation. Express Exit™
drops as well as tool-less products including Snap-Fit™ junctions, snap-on covers and new hinged cover
options save valuable time for installers.
Speed of Deployment
The Express Exit™ system enables new drops to be added or removed quickly and easily. A drop can be added
into a fully loaded raceway in seconds—without cutting.
Raceway Flexibility
FiberGuide® features 38 support structures, over 75 fittings, multiple drop options and several other
components to suit any application you create.
Fibre Protection
ADC KRONE's broadband expertise translates into maximum protection for your network. Two-inch minimum
bend radius is maintained throughout the system regardless of the raceway size.
Strength and Durability
100% raceway reliability—stands up to any challenge.
06/10
•
401326IN
Features and Benefits
www.adc.com/in
5
Applications
Combining System Parts
A combination of components from the various sized raceway systems typically comprise overhead
FiberGuide® systems. Adapters are used to make the transition between sizes. An example of an
overhead system that combines many of ADC KRONE's FiberGuide® systems can be seen below.
4x12 90° Horizontal Elbow
FGS-MH9E-F
4x12 Horizontal T with single 6" Exit
FGS-MHRT-F/B
4x24 Island T with Single 12" Exit
FGS-MHRT-H/F
Express Exit
FGS-MEXP-A/B/F
4x6 45° Down Elbow
FGS-MD4E-B
4x6 45° Up Elbow with Cover
FGS-MU4E-B
4x12 to Dual 4x6 Adapter
FGS-MDSA-F2B
4x6 Straight Section
FGS-MSHS-B
4x24 45° Up Elbow
FGS-MU4E-H
4x6 Horizontal Cross
FGS-MHXP-B
Low Profile Express Exit
FGS-MEXP-LP-A/B/F
4x6 90° Down Elbow
FGS-MD9E-B
4x12 Horizontal
Cross with two
6" Exits
FGS-MHXP-B/F
Trumpet Flare
FGS-MTRM-G
FGS-MH4E-B
4x6 to 4x6 Adapter
FGS-MH4E-B
4x6 90° Up Elbow
with cover
FGS-MU9E-B
4x4 Cut in T for 4x24
FiberGuide® FGS-MHIS-A/H
FGS-MH9E-A
FGS-MSHS-A
2x2 to 4x4 Adapter
FGS-MDSA-AC
2x2 90° Extended
Horizontal Elbow
FGS-MH9A-C-45/2
or
FGS-MH9A-C
2x2 Horizontal
Straight Section
FGS-MSHA-A
•
401326IN
4x12 Horizontal T
FGS-MHRT-F
FGS-MSHS-F
4x12 45°
Down Elbow
FGS-MD4E-F
Trumpet Flare
FGS-MTRM-F
FGS-MSHS-H
4x12 to 4x24 Adapter
FGS-MDSA-H/F
06/10
Applications
4" Express Exit
FGS-MEXP-E-A/B/F
FGS-MHXP-H
www.adc.com/in
6
Applications
Downspout Drop Options
A downspout drop is recommended over optical distribution frame lineups. The rigid 2-inch drop
option and 2-inch flex tube option are two methods for directing fibres out of overhead FiberGuide®
downspouts and into optical equipment bays. The rigid system is recommended because it offers
excellent bend radius control and ensures a quality fibre backbone installation.
4x6 Downspout
FGs-MDsP-b
4x4/4x6
Downspout insert
FGs-HDsi-Ab
4x6 Snap-Fit Junction
FGs-MFAW-b
2x2 45°
Down Elbow
FGS-MD4A-C*
2x2 Junction Kit
FGs-MJWr-c
4x6 Downspout
FGs-MDsP-b
FGs-MFAW-b
4x6 End Cap Kit
FGs-HMEc-b
4x6 Downspout Cover
FGs-McDs-Ab
4x4 End Cap with one
2" Flex Tube, 5' long
FGS-KT03-A1
2x2 45° Up Elbow
FGS-MU4A-C*
*Shown without cover
2x2 Vertical
Slotted Duct Kit
FGS-KTW1-C*
2x2 Vertical
Slotted Duct Kit
FGS-KTW1-C
06/10
•
401326IN
FGs-MsHs-b
4x6 End Cap Kit
FGs-HMEc-b
2x2 Rigid Drop Option
www.adc.com/in
2" Flex Tube Drop Option
7
Applications
FGs-MsHs-b
Applications
Express Exit™ Drop Options
An Express Exit™ is recommended over active equipment racks or cabinets. The rigid 2-inch drop
option and 2-inch flex tube option are two methods for directing fibres out of overhead FiberGuide®
downspouts and into optical equipment bays. The rigid system is recommended because it offers
excellent bend radius control and ensures a quality fibre backbone installation.
Express Exit 2x2
FGS-MEXP-A/B/F*
FGs-MsHs-b
2x2 Junction Kit (4)
FGs-MJWr-c
2" Flex Tube Attachment
with 5' of Flex Tube
FGs-MEX1-c-5F
2x2 Horizontal Solid
straight section
FGS-MSHA-C*
* Shown without Cover
2x2 Vertical
Slotted Duct Kit
FGS-KTW1-C*
2x2 Vertical
Slotted Duct Kit
FGS-KTW1-C
* Shown without Cover
•
401326IN
2x2 45° Down Elbow
FGS-MD4A-C
2x2 Rigid Drop Option
2" Flex Tube Drop Option
06/10
Applications
FGs-MsHs-b
Express Exit 2x2
FGS-MEXP-A/B/F*
www.adc.com/in
8
Applications
Trumpet Flare Options
The trumpet flare is recommended at the bottom of a downspout when directing fibres into a fibre
distribution bay. Trumpet flares provide bend radius protection and allow for a large number of fibre
patch cords to transition into a fibre bay. A 4x4 trumpet flare is used for the 4x4 and 4x6 downspouts
and a 4x6 trumpet flare is used for the 4x12 downspout.
4x12 Horizontal
Straight Section
FGS-MSHS-F
4x6 Straight
Section
FGS-MSHS-B
4x6 Snap-Fit Junction (2)
FGS-MFAW-B
4x4 Trumpet Flare Kit
FGS-MTRM-A
New Threaded
Rod Bracket Kit
FGS-HNTR-F-5/8
FGS-MTRM-B
Horizontal T and Trumpet Flare
Downspout with Trumpet Flare
When attaching a straight section or fitting to the exit of a 4x4 or 4x6 downspout, the FGS-MJWR-A
junction must be used. This junction is only required to connect the vertical part, the FGS-MFAW-X
junction can be used to connect the horizontal parts.
06/10
FGS-MFAW-X
FGS-MJWR-A
Shown Assembled
www.adc.com/in
Exploded View
9
Applications
4x6 Downspout
FGS-MDSP-B
4x12 Snap-Fit
Junction (2)
FGS-MFAW-F
•
401326IN
4x12 Horizontal T
with single 6" Exit
FGS-MHRT-F/B
Applications
4x24-Inch Island T
•
401326IN
4x24 Island T
(Shown with support brackets over an NGF frame.)
06/10
Applications
The 4x24 Island T with 12-inch exit is designed to be used over the NGF, NG3® or any high-density fibre
frame. The 4x24 Island T, a horizontal T with spool and factory-installed trumpet flare, channels fibre
directly into the vertical cableways below.
www.adc.com/in
10
Applications
Raceway Reconfigurations
Applications
Fixture attached to sidewall of raceway
Fixture protects cables during cutting of sidewall
Fitting fills gap left by removed sidewall
Supplied hardware secures fitting to raceway
and completes installation
06/10
•
401326IN
Cut-in T, Fitting and Fixture
ADC KRONE's innovative cut-in T fitting and fixture enable on-site raceway modifications without
jeopardizing the integrity of installed fibres. Available in 4-, 6-, and 12-inch widths, the cut-in T fitting
can be retrofitted to any installed 4-, 6-, 12-, and 24-inch straight section using the cut-in T fixture and
the hardware supplied with the fitting. No special tools are required.
www.adc.com/in
11
Applications
Raceway Reconfigurations
Expandable straight section extends to connect runs
•
401326IN
Raceway system with gap between opposing runs
06/10
Applications
Expandable Straight Sections
ADC KRONE's expandable straight section simplifies installation and enhances the overall flexibility
of the raceway system. The innovative straight section also provides an access point for future
reconfigurations. Available in 4-, 6-, and 12-inch widths, the expandable straight section reduces the
installation time necessary to connect opposing runs and provides continuous support for patch cords.
Completed installation
www.adc.com/in
12
Applications
Supporting Overhead Systems
A variety of support kits are available for each FiberGuide® system. Whenever possible, FiberGuide®
support kits should be attached to existing hardware (cable racks, digital cableways, existing threaded
rods or equipment racks).
2x6, 4x4, 4x6 Systems
Unistrut Nut Kit
threaded rod
ladder rack
Bracket Kit
threaded rod
threaded rod
new threaded rod
Bracket Kit
new threaded rod
Bracket Kit
Auxiliary Framing Support
new threaded
Rod Bracket Kit
Ladder Rack Support
Unistrut Support
center support
Bracket Kit
threaded rod
top support
c-bracket
threaded rod
Top of Rack/Cabinet Support
Anchor Support
06/10
•
401326IN
4x12 System
Unistrut Nut Kit
threaded rod
threaded rod
center support
Bracket Kit
top support low
Profile c-bracket
threaded rod
trapeze
Bracket Kit
Trapeze Bracket Kit
Top of Rack/Cabinet Support
www.adc.com/in
Anchor Support
13
Applications
Auxiliary Framing
Support Kit
Applications
4x12 and 4x24 Systems
The straight sections on the 4x12 and 4x24 FiberGuide® system are exceptionally strong, making
frequent placement of supports beneath them unnecessary. Whenever possible the supports should
be placed under the fittings using the mounting bosses as shown (photos 1 and 2). This placement
provides the strongest system and requires the least amount of support hardware to be used.
Occasionally it is not possible to attach the support bracket to the mounting bosses on the fittings;
in those instances the variable fitting support locator can be installed on the bottom of the fitting,
allowing the support to be attached anywhere along the fitting bottom (photos 3, 4 and 5). When
combining several straight sections, it is recommended that support brackets are installed on both
sides of each junction.
Typical 4x12 system installation over a Next Generation Frame Line-up
2
•
401326IN
1
3
4
5
06/10
Applications
Supporting Overhead Systems
Variable Fitting Support Locator
Note: See pages 46 and 54 for 4x12 and 4x24 system fittings.
www.adc.com/in
14
Recommended and Maximum Patch Cord Densities............ 16
Things to Consider when Ordering................................. 17-18
www.adc.com /in
15
Recommended and Maximum Patch Cord Densities
Recommended capacity takes into consideration random jumper placement into the FiberGuide®
system. Maximum density refers to the maximum number of fibre jumpers in a given cross-section of a
FiberGuide® installation. The TracerLight® Connector Identification System is ADC KRONE's newest patch
cord solution. It features slightly different dimensions than standard patch cords.
401326IN
•
06/10
Recommended/Maximum Density
1.7 mm
Patch Cords (per in2)
2.0 mm
3.0 mm
120/142
90/102
40/44
Trough Pileup
2-inch
3-inch
4-inch
4x24 System
3120
4680
6420
4x12 System
1560
2340
3120
8640/9792
4x6 System
780
1170
1560
3840/4224
4x4 System
520
780
1040
2x6 System
780
–
–
2x2 System
260
–
–
2-Inch
3-Inch
4-Inch
5760/6816
8640/10224
11520/13632
2.0 mm
4320/4869
6480/7344
3.0 mm
1920/2112
2880/3168
4x24 System
1.7 mm
TracerLight® Patch Cords—
65 Patch Cords per in2
4x12 System
1.7 mm
2880/3408
4320/5112
5760/6816
2.0 mm
2160/2448
3240/3672
4320/4896
3.0 mm
960/960
1440/1584
1920/2112
1.7 mm
1440/1704
2160/2556
2880/3408
2.0 mm
1080/1224
1620/1836
2160/2448
3.0 mm
480/528
720/792
960/1056
1.7 mm
960/1136
1440/1704
1920/2272
2.0 mm
720/816
1080/1224
1440/1632
3.0 mm
320/352
480/528
640/704
1.7 mm
1440/1740
–
–
2.0 mm
1080/1224
–
–
3.0 mm
480/528
–
–
1.7 mm
480/568
–
2.0 mm
360/408
–
–
3.0 mm
160/176
–
–
4x6 System
4x4 System
2x6 System
2x2 System
www.adc.com/in
16
FiberGuide® Fibre Management System
Things to Consider When Ordering
For a more complete guide to engineering and planning a FiberGuide® installation, see ADCP-90-166,
4th Edition, Issue 3, March 1996, Section 4, Engineering and Installation Section. For additional technical
information see ADCP95-005.
For main aisle runs and/or installations above high density fibre frame equipment, consider the 12" and
24" FiberGuide® product found on page 46 and 54 respectively.
For tributary runs and/or installations above fibre optic terminals (FOTs), consider the 4" and 6"
FiberGuide® product found on page 30 and 38 respectively.
Consider the use of Express Exits™ rather than the traditional downspouts for bringing fibre out of a
straight section run and into a fibre optic terminal (FOT) bay. The Express Exit™ installs without tools and
does not require any cutting for installation.
Calculate the maximum potential amount of fibre in a given line-up to determine the proper sized
FiberGuide® over that line-up. Considerations should be given to pile-up densities (see page 16 for
recommended pile-up densities) and redundant routing paths which will have an effect on proper
FiberGuide® sizing.
See pages 58-59 for ordering information on Express Exits™ and pages 62-63 vertical slotted duct systems.
See pages 72-74 for ordering information on system and support kit accessories. Consider the use of
the retrofit fin kit for potentially high traffic areas on the 4x4" or 4x6" FiberGuide® systems (fins come
molded into certain fittings on the 2x6", 4x12" and 4x24" systems). The fin helps to spread the pile-up
of jumpers efficiently across the width of a given FiberGuide® system especially at horizontal turns and
intersections.
Product Number
Quantity
1) Select the Desired FiberGuide® Horizontal Components
Horizontal Straight Sections (6-feet each)
2x2" System – Page 22
06/10
45°, 90° Horizontal Elbows, Straight Adapters and End Caps
www.adc.com/in
17
Consider the use of variable support locators for the 4x12" and 4x24" FiberGuide® systems found on
page 69 and 70 respectively. The variable support locators provide additional mounting options for
support brackets underneath larger fittings such as horizontal T's or elbows.
•
401326IN
For height restricted environments, consider the 2x6" FiberGuide® system found on pages 24-27.
FiberGuide® Fibre Management System
Things to Consider When Ordering
Product Number
Quantity
2) Select the Desired FiberGuide Vertical Components
®
45°, and 90° Up and Down Elbows
2x6" System – Page 24-25
Downspouts, Trumpet Flares and Attachments
Express Exits and Vertical Slotted Duct Systems
•
401326IN
06/10
Express Exit™ Family – Page 57
Vertical Slotted Duct Systems – Page 61
3) Select the Desired FiberGuide® Support Kits and Accessories
FiberGuide® Support Kits
2x6", 4x4" and 4x6" System – Page 68
For accessories including attachment hardware and threaded rod, see pages 72-74.
www.adc.com/in
18
2x2 System
Fittings................................................................................. 20
Straight Section and Junction............................................... 22
www.adc.com /in
19
2x2 System
Downspouts and Attachments............................................. 21
2x2 System
401326IN
•
06/10
2x2 System
Fittings – 2" H x 2" W
Horizontal T
(FGS-MHTA-C)
Horizontal Cross
(FGS-MHXP-C)
45° Horizontal Elbow
(FGS-MH4A-C)
90° Horizontal
Elbow
(FGS-MH9A-C)
90° Extended
Horizontal Elbow
(FGS-MH9A-C-45/2)
45° Up Elbow
(FGS-MU4A-C)
45° Down Elbow
(FGS-MD4A-C)
2x2 to 4x4
Straight Adapter
(FGS-MDSA-AC)
End Cap
(FGS-HMEC-C)
Ordering Information
Number of
Junctions
Description
Product Number
Yellow System
Orange System
2x2 fittings
Horizontal T; cover included
3
FGS-MHTA-C
FGSO-MHTA-C
Horizontal cross; cover and two
2x2 junctions included; two additional
2x2 junctions required (see p. 22)
2+2
FGS-MHXP-C
FGSO-MHXP-C
45° horizontal elbow; cover included
2
FGS-MH4A-C
FGSO-MH4A-C
90° horizontal elbow; cover included
2
FGS-MH9A-C
FGSO-MH9A-C
90° extended horizontal elbow; cover
included; similar to two 45° horizontal
elbows joined
2
FGS-MH9A-C-45/2
FGSO-MH9A-C-45/2
45° up elbow; cover included
2
FGS-MU4A-C
FGSO-MU4A-C
90° up elbow; cover included
2
FGS-MU9A-C
FGSO-MU9A-C
45° down elbow; cover included
2
FGS-MD4A-C
FGSO-MD4A-C
90° down elbow; cover included
2
FGS-MD9A-C
FGSO-MD9A-C
FGS-MDSA-AC
FGSO-MDSA-AC
FGS-HMEC-C
FGSO-HMEC-C
2x2 conversions
2x2 to 4x4 straight adapter; cover included
(1) 2x2, (1) 4x4
2x2 end cap
End cap; junction included
www.adc.com/in
––
20
2x2 System
06/10
•
401326IN
2x2 Standard Downspout
(FGS-MSDS-C)
2x2 Extended Downspout
(FGS-MDSP-C)
Extended Downspout
(FGS-KDH2-C shown attached to
2x2 FiberGuide® system)
Dual 7/8" Flex Tube Attachment
(FGS-KT03-C)
Dual 7/8" Flex Tube Attachment
(FGS-KT03-C shown attached
to downspout)
2x2 Trumpet Flare
(FGS-MTRM-C)
Number of
Junctions
Description
Product Number
Yellow System
Orange System
2x2 downspouts
Standard downspout; cover included
2
FGS-MSDS-C
FGSO-MSDS-C
Extended downspout; cover included
1
FGS-MDSP-C
FGSO-MDSP-C
Extended downspout; cover and 2" flex tube,
2' long, included
1
FGS-KDH2-C
FGSO-KDH2-C
Trumpet flare; 2x2 junction included
–
FGS-MTRM-C
FGSO-MTRM-C
2x2 attachments
2x2 flex tube attachment – 2" flex tube and a 2x2 junction included
5' length
–
FGS-MEX1-C-5F
FGSO-MEX1-C-5F
10' length
–
FGS-MEX1-C-10F
FGSO-MEX1-C-10F
15' length
–
FGS-MEX1-C-15F
FGSO-MEX1-C-15F
Dual 7/8" flex tube attachment – two lengths of 7/8" flex tube and a 2x2 junction included
(2) 5' length
–
FGS-KT03-C
FGSO-KT03-C
(2) 10' length
–
FGS-KT03-C-10F
FGSO-KT03-C-10F
(2) 15' length
–
FGS-KT03-C-15F
FGSO-KT03-C-15F
–
FGS-HSHC-10
FGS-HSHC-10
Flex tube clamp kit of 10;
attaches 7/8" flex tube to rack
www.adc.com/in
21
2x2 System
Downspouts and Attachments – 2" H x 2" W
2x2 System
Straight Section and Junction – 2" H x 2" W
Straight Section
Product Number
Description
Yellow System
Orange System
2x2 straight section;
horizontal straight section; 6' long, cover included
FGS-MSHA-C
FGSO-MSHA-C
Junction
The 2x2 junction is used for mechanically joining FiberGuide®
sections. No tools are required for assembly.
Junction
(FGS-MJWR-C)
Product Number
Description
Yellow System
Orange System
2x2 junction
FGS-MJWR-C
FGSO-MJWR-C
•
401326IN
Horizontal Straight Section
(FGS-MSHA-C)
06/10
2x2 System
The 2x2 straight section is a U-shaped trough that provides a
protective raceway for optical fibres. Available in 6-foot lengths, the
straight section carries fibres horizontally throughout the system.
It can also be installed vertically when routing around obstructions.
A warning label indicating caution around fibre optic cable is included
with each junction kit.
www.adc.com/in
22
2x6 System
Fittings, Low-Profile Express Exit™,
Straight Section.................................................................... 26
2x6 System
Junction................................................................................ 27
www.adc.com /in
23
2x6 System
Fittings, Downspouts and Attachments – 2" H x 6" W
Number of
Junctions
Description
Yellow System
Product Number
2x6 fittings
401326IN
•
06/10
2x6 System
Horizontal T
3
FGS-MHRT-G
Horizontal cross
4
FGS-MHXP-G
90° horizontal elbow
2
FGS-MH9E-G
90° down elbow
2
FGS-MD9E-G
2
FGS-MH4E-G
45° up elbow, metal cover included
2
FGS-MU4E-G
45° down elbow
2
FGS-MD4E-G
2x6 conversions
2x6 to 4x4 adapter
(1) 2x6, (1) 4x4
FGS-MDSA-GA
2x6 to 4x6 adapter
(1) 2x6, (1) 4x6
FGS-MDSA-GB
–
FGS-MTRM-G
2
FGS-MDSP-G
–
FGS-KT03-G-5F
–
FGS-HMEC-G
Trumpet flare
2x6 downspouts
2x6 to 2x2 downspout
2x6 attachments
Dual 2" flex tube attachment
2x6 end cap
Low-Profile Express Exit™
Designed for low-ceiling or height restricted environments, the Express
Exit™ for the 2x6 FiberGuide® system extends only two inches above
the straight section sidewall. The Express Exit™ accommodates up to
150 (3 mm) patch cords, includes removable rear cable guides for
additional cable management, and features a 2x2 exit opening. It is
designed specifically for the 2x6 FiberGuide® system and should not be
used on any other FiberGuide® system.
Express Exit
(FGS-MEXP-LP-G)
Yellow System
Product Number
Description
Low-Profile Express Exit™ (designed exclusively for the 2x6 system)
Base, cover, mounting hardware, and support bracket included
www.adc.com/in
FGS-MEXP-LP-G
24
2x6 System
Horizontal T
(FGS-MHRT-G)
Horizontal Cross
(FGS-MHXP-G)
(FGS-MH9E-G)
90° Down Elbow
(FGS-MD9E-G)
(FGS-MH4E-G)
45° Up Elbow
(FGS-MU4E-G)
(Metal Cover Included)
45° Down Elbow
(FGS-MD4E-G)
2x6 to 4x4 Adapter
(FGS-MDSA-GA)
2x6 to 4x6 Adapter
(FGS-MDSA-GB)
Trumpet Flare
(FGS-MTRM-G)
2x6 System
2x6 to 2x2 Downspout
(FGS-MDSP-G)
06/10
•
401326IN
Fittings, Downspouts and Attachments – 2" H x 6" W
www.adc.com/in
25
2x6 System
Straight Section – 2" H x 6" W
The unique four-channel design of the 2x6 FiberGuide® straight
section allows the standard system to be attached to the support
structure without the need to cut or drill any holes within the trough.
This ensures that the patch cords will not come in contact with any
screw heads or bolts.
Description
2x6 straight section;
horizontal straight section; 6' long, cover sold seperately
Straight Section
(FGS-MSHS-G)
FGS-MSHS-G
2x6 accessories
2x6 hinged cover kit for horizontal straight section;
three mounting hinges and three clips included
FGS-MSNC-B/G
6-inch snap-on cover kit for horizontal
straight section; six capture clips with
mounting clasps included
FGS-MSSC-B/G
Kit-10 black capture clips*
FGS-DHCP
Hinged Cover Kit for
(FGS-MSNC-B/G)
*See drawings on page 79 for more detail on how capture
clips and hinges are used.
6-inch Snap-on Cover
(FGS-MSSC-B/G)
•
401326IN
Yellow System
Product Number
06/10
2x6 System
www.adc.com/in
26
2x6 System
Junction – 2" H x 6" W
The one-piece junction employs factory-installed set screws to assure
strength and durability. No cutting or drilling of the components is
required for assembly. A warning label indicating caution around fibre
optic cable is included with each junction kit.
Yellow System
Product Number
2x6 junction
FGS-JUNC-G
2x6 Junction
(FGS-JUNC-G)
2x6 System
Description
06/10
•
401326IN
www.adc.com/in
27
www.adc.com/in
28
4x4 System
Fittings................................................................................. 30
4x4 System
Snap-Fit™ Junction................................................................ 35
www.adc.com /in
29
4x4 System
Product Number
Description
Number
of
Junctions
Yellow System
Yellow
System
Snap-on
Cover
Orange System
Orange
System
Snap-on
Cover
Fixed
Metal
Cover
FGS-CHRT-A
401326IN
•
Horizontal T
3
FGS-MHRT-A
FGS-SHRT-A
FGSO-MHRT-A
FGSO-SHRT-A
Horizontal cross
4
FGS-MHXP-A
FGS-SHXP-A
FGSO-MHXP-A
FGSO-SHXP-A FGS-CHXP-A
90° horizontal
elbow
2
FGS-MH9E-A
FGS-SH9E-A
FGSO-MH9E-A
FGSO-SH9E-A
FGS-CH9E-A
90° up elbow
metal cover
included
2
FGS-MU9E-A
FGS-SU9E-A
FGSO-MU9E-A
FGSO-SU9E-A
FGS-CU9E-A
90° down elbow
2
FGS-MD9E-A
FGS-SD9E-A
FGSO-MD9E-A
FGSO-SD9E-A
FGS-CD9E-A
45° horizontal
elbow
2
FGS-MH4E-A
FGS-SH4E-A
FGSO-MH4E-A
FGSO-SH4E-A
FGS-CH4E-A
45° up elbow
metal cover
included
2
FGS-MU4E-A
FGS-SU4E-A
FGSO-MU4E-A
FGSO-SU4E-A
FGS-CU4E-A
45° down elbow
2
FGS-MD4E-A
FGS-SD4E-A
FGSO-MD4E-A
FGSO-SD4E-A
FGS-CD4E-A
FGS-CDSA-AB
4x4 conversions
4x4 to 4x6
straight adapter
(1) 4x4,
(1) 4x6
FGS-MDSA-AB
FGS-SDSA-AB
FGSO-MDSA-AB
FGSO-SDSA-AB
4x4 expandable
straight section
2
FGS-MVAR-A
–
FGSO-MVAR-A
–
–
4"Cut-in T
assembly hardware included
–
FGS-MHIS-A
–
FGSO-MHIS-A
–
–
6"Cut-in T
–
FGS-MHIS-B
–
FGSO-MHIS-B
–
–
12"Cut-in T
–
FGS-MHIS-F
–
FGSO-MHIS-F
–
–
Cut-in T fixture
–
FGS-MHIS-JIG-A/B/F
–
FGS-MHIS-JIG-A/B/F
–
–
–
FGS-HMEC-A
–
FGS-HMEC-A
–
–
4x4 end cap
06/10
4x4 System
4x4 fittings
www.adc.com/in
30
4x4 System
Horizontal Cross
(FGS-MHXP-A)
(FGS-MH9E-A)
90° Up Elbow
Metal Cover Included
(FGS-MU9E-A)
90° Down Elbow
(FGS-MD9E-A)
(FGS-MH4E-A)
45° Up Elbow
Metal Cover Included
(FGS-MU4E-A)
45° Down Elbow
(FGS-MD4E-A)
4x4 to 4x6 Straight Adapter
(FGS-MDSA-AB)
Expandable Straight Section
(FGS-MVAR-A)
Cut-in T
(FGS-MHIS-A)
Cut-in T Fixture
shown on straight section
(FGS-MHIS-JIG-A/B/F)
End Cap
(FGS-HMEC-A)
Snap-on Plastic Cover
(FGS-SH4E-A shown attached to 45°
horizontal elbow with junctions)
4x4 System
Horizontal T
(FGS-MHRT-A)
06/10
•
401326IN
www.adc.com/in
31
4x4 System
An array of 4x4 downspout options are available to feed fibre from overhead straight sections into fibre
optic equipment below.
Description
Number of
Junctions
Yellow System
Product Number
Orange System
Product Number
4x4 downspouts
–
FGS-MDSP-A
FGSO-MDSP-A
FGS-MCDS-AB
FGSO-MCDS-AB
Extended downspout
–
FGS-MDSP-EX-A
FGSO-MDSP-EX-A
Cover for 4x4 extended downspout
–
FGS-MCDS-EX-AB
FGSO-MCDS-EX-AB
Insertable downspout
–
FGS-MDSP-A/I
FGSO-MDSP-A/I
Trumpet flare used on both 4x4 and 4x6
downspouts; no 4" junction kit required
–
FGS-MTRM-A
FGSO-MTRM-A
Downspout exit junction kit
–
FGS-MJWR-A
FGSO-MJWR-A
4x4/4x6 downspout; insert converts bottom of downspout to 2x2" without using
2" to 4" adapter, saving vertical space
–
FGS-HDSI-AB
FGS-HDSI-AB
4x4 attachments
Square to 2" round adapter with flex tube;
one 4x4 junction kit (FGS-MJWR-A) required to attach to a downspout drop
5' length
1
FGS-ASRI-5F
FGSO-ASRI-5F
10' length
1
FGS-ASRI-10F
FGSO-ASRI-10F
15' length
1
FGS-ASRI-15F
FGSO-ASRI-15F
Dual 2" flex tube attachment; no 4x4 junction kit required
–
FGS-KT03-A
FGSO-KT03-A
(2) 10' length
–
FGS-KT03-A10F
FGSO-KT03-A10F
(2) 15' length
–
FGS-KT03-A15F
FGSO-KT03-A15F
401326IN
(2) 5' length
•
2*
Single 2" flex tube attachment; no 4x4 junction kit required
Quad 2" flex tube attachment; no 4x4 junction kit required
06/10
4x4 System
Downspout
Cover for 4x4 downspout
5' length
–
FGS-KT03-A1
FGSO-KT03-A1
10' length
–
FGS-KT03-A1-10F
FGSO-KT03-A1-10F
15' length
–
FGS-KT03-A1-15F
FGSO-KT03-A1-15F
(4) 5' length
–
FGS-KT03-A4-5F
FGSO-KT03-A4-5F
(4) 10' length
–
FGS-KT03-A4-10F
FGSO-KT03-A4-10F
(4) 15' length
–
FGS-KT03-A4-15F
FGSO-KT03-A4-15F
4x4 quad 7/8" flex tube attachment; no 4x4 junction kit required
(4) 5' length
–
FGS-KT07-A4-5F
FGSO-KT07-A4-5F
(4) 10' length
–
FGS-KT07-A4-10F
FGSO-KT07-A4-10F
(4) 15' length
–
FGS-KT07-A4-15F
FGSO-KT07-A4-15F
*A third junction is needed if drop is to a fitting or straight section. This drop junction must be a
junction type FGS-MJWR-A.
www.adc.com/in
32
4x4 System
Cover for 4x4 Downspout
(FGS-MCDS-AB)
Extended Downspout
(FGS-MDSP-EX-A
shown with and without cover)
Insertable Downspout
(FGS-MDSP-A/I)
Trumpet Flare
(FGS-MTRM-A)
Downspout Exit
Junction Kit
(FGS-MJWR-A)
4x4/4x6 Downspout Insert
(FGS-HDSI-AB)
4" Square to 2" Round
Adapter with Flex Tube
(FGS-ASRI
requires FGS-MJWR-A
Junction Kit)
Dual 2"
Flex Tube Attachment
(FGS-KT03-A)
Single 2"
(FGS-KT03-A1)
2" Quad Flex
Tube Attachment
(FGS-KT03-A4)
4x4 System
Downspout
(FGS-MDSP-A)
06/10
•
401326IN
www.adc.com/in
33
4x4 System
Snap-On
Cover for Horizontal
Straight Section
(FGS-MSSC-A)
Hinged Cover for
Horizontal Straight
Section
(FGS-MSNC-A)
Product Number
Description
Yellow System
Orange System
Horizontal straight section; 6' long, cover sold seperately
FGS-MSHS-A
FGSO-MSHS-A
Expandable straight section
FGS-MVAR-A
FGSO-MVAR-A
Hinged cover kit for horizontal straight section;
includes three mounting hinges and three clips
FGS-MSNC-A
FGSO-MSNC-A
Snap-on cover kit for horizontal straight section;
includes six capture clips with mounting clasps
FGS-MSSC-A
FGSO-MSSC-A
Kit - 10 black capture clips*
FGS-DHCP
FGS-DHCP
Kit - 10 black capture clips and 10 hinges*
FGS-DHHC
(Yellow Hinge)
FGSO-DHHC
(Orange Hinge)
4x4 straight section
4x4 accessories
*See drawings on page 82 for more detail on how capture clips and hinges are used.
•
401326IN
Expandable
Straight Section
(FGS-MVAR-A)
Horizontal
Straight Section
(FGS-MSHS-A)
06/10
4x4 System
The unique four-channel design of the 4x4 FiberGuide® straight section allows the standard system
to be attached to the support structure without the need to cut or drill any holes within the trough.
This ensures that the patch cords will not come in contact with any screw heads or bolts, an important
consideration in 4x4 systems where higher cable counts apply increased pressure on patch cords at the
bottom of the trough.
www.adc.com/in
34
4x4 System
Snap-Fit™ Junction – 4" H x 4" W
The Snap-Fit™ junction assembly is available for the 4-inch
FiberGuide® system. The Snap-Fit junction is a completely tool-less
junction. No additional tools are required for installation or removal.
The junction exhibits superior holding force and accommodates
support brackets. A warning label indicating caution around fibre
optic cable is included with each junction kit.
Product Number
Yellow System
Orange System
4x4 Snap-Fit™ junction
FGS-MFAW-A
FGSO-MFAW-A
4x4 System
Description
Snap-Fit Junction
(FGS-MFAW-A)
06/10
•
401326IN
www.adc.com/in
35
www.adc.com/in
36
4x6 System
Fittings................................................................................. 38
4x6 System
www.adc.com /in
37
4x6 System
Product Number
Description
Number
of
Junctions
Yellow System
Yellow
System
Snap-on
Cover
Orange System
Orange
System
Snap-on
Cover
Fixed
Metal
Cover
401326IN
•
06/10
4x6 System
4x6 fittings
Horizontal T
3
FGS-MHRT-B
FGS-SHRT-B
FGSO-MHRT-B
FGSO-SHRT-B
FGS-CHRT-B
Horizontal cross
4
FGS-MHXP-B
FGS-SHXP-B
FGSO-MHXP-B
FGSO-SHXP-B
FGS-CHXP-B
90° horizontal
elbow
2
FGS-MH9E-B
FGS-SH9E-B
FGSO-MH9E-B
FGSO-SH9E-B
FGS-CH9E-B
90° up elbow
metal cover
included
2
FGS-MU9E-B
FGS-SU9E-B
FGSO-MU9E-B
FGSO-SU9E-B
FGS-CU9E-B
90° down elbow
2
FGS-MD9E-B
FGS-SD9E-B
FGSO-MD9E-B
FGSO-SD9E-B
FGS-CD9E-B
45° horizontal
elbow
2
FGS-MH4E-B
FGS-SH4E-B
FGSO-MH4E-B
FGSO-SH4E-B
FGS-CH4E-B
45° up elbow
metal cover
included
2
FGS-MU4E-B
FGS-SU4E-B
FGSO-MU4E-B
FGSO-SU4E-B
FGS-CU4E-B
45° down elbow
2
FGS-MD4E-B
FGS-SD4E-B
FGSO-MD4E-B
FGSO-SD4E-B
FGS-CD4E-B
(1) 4x4,
(1) 4x6
FGS-MDSA-AB
FGS-SDSA-AB
FGSO-MDSA-AB
FGSO-SDSA-AB
FGS-CDSA-AB
4x12 to single
4x6 adapter
–
FGS-MDSA-FB
FGS-SDSA-FB
FGSO-MDSA-FB
FGSO-SDSA-FB
–
4x6 expandable
straight section
2
FGS-MVAR-B
–
FGSO-MVAR-B
–
–
4" Cut-in T;
–
FGS-MHIS-A
–
FGSO-MHIS-A
–
–
6" Cut-in T;
–
FGS-MHIS-B
–
FGSO-MHIS-B
–
–
12" Cut-in T;
–
FGS-MHIS-F
–
FGSO-MHIS-F
–
–
Cut-in T fixture
–
FGS-MHIS-JIG-A/B/F
–
FGS-MHIS-JIG-A/B/F
–
–
–
FGS-HMEC-B
–
FGS-HMEC-B
–
–
4x6 conversions
4x4 to 4x6
straight adapter
4x6 end cap
www.adc.com/in
38
4x6 System
Horizontal Cross
(FGS-MHXP-B)
(FGS-MH9E-B)
90° Up Elbow
Cover Included
(FGS-MU9E-B)
90° Down Elbow
(FGS-MD9E-B)
(FGS-MH4E-B)
45° Up Elbow
Cover Included
(FGS-MU4E-B)
45° Down Elbow
(FGS-MD4E-B)
(FGS-MDSA-AB)
Expandable
Straight Section
(FGS-MVAR-B)
6" Cut-in T
(FGS-MHIS-B)
Cut-in T Fixture
(FGS-MHIS-JIG-A/B/F shown on
a straight section)
4x12 to Single 4x6 Adapter
(FGS-MDSA-FB)
(Cover: FGS-SDSA-FB)
End Cap
(FGS-HMEC-B)
Snap-on Plastic Cover
(FGS-SH4E-B shown attached
to 45° horizontal elbow
with junctions)
www.adc.com/in
39
4x6 System
Horizontal T
(FGS-MHRT-B)
06/10
•
401326IN
4x6 System
4x6 downspouts and attachments feed fibre from overhead straight sections into fibre optic equipment
below. All 4x6 downspouts feature 4-inch exits and attach to the 4-inch x 4-inch attachments listed below.
Number of
Junctions
Description
Product Number
Yellow System
Orange System
FGS-MDSP-B
FGSO-MDSP-B
2*
Cover for 4x6 downspout and dual downspout
–
FGS-MCDS-AB**
FGSO-MCDS-AB**
Extended downspout
2
FGS-MDSP-EX-B
FGSO-MDSP-EX-B
Cover for 4x6 extended downspout
–
FGS-MCDS-EX-AB
FGSO-MCDS-EX-AB
–
FGS-MDSP-B/I
FGSO-MDSP-B/I
Dual drop downspout
2*
FGS-MDSP-2B
FGSO-MDSP-2B
Trumpet flare for dual drop downspout (kit of 2)
–
FGS-MTRM-2B
FGSO-MTRM-2B
Dual drop downspout with divider
2
FGS-MDSP-2B-IMP
FGSO-MDSP-2B-IMP
Trumpet flare for dual drop downspout with divider (kit of 2)
FGS-MTRM-2B-IMP
FGSO-MTRM-2B-IMP
Downspout with exit junction
FGS-MJWR-A
FGSO-MJWR-A
4x4/4x6 downspout insert; converts bottom of downspout to
2x2 without using 2" to 4" adapter, saving vertical space
FGS-HDSI-AB
FGS-HDSI-AB
Trumpet flare; used on both 4x4 and 4x6 downspouts —
no 4" junction kit required
FGS-MTRM-A
FGSO-MTRM-A
4x6 attachments
4x4 square to 2" round adapter with flex tube;
one 4x4 junction kit (FGS-MJWR-A) required to attach to a downspout drop
5' length
1
FGS-ASRI-5F
FGSO-ASRI-5F
10' length
1
FGS-ASRI-10F
FGSO-ASRI-10F
15' length
1
FGS-ASRI-15F
FGSO-ASRI-15F
4x4 dual 2" flex tube attachment; no 4x4 junction kit required
(2) 5' length
–
FGS-KT03-A
FGSO-KT03-A
(2) 10' length
–
FGS-KT03-A10F
FGSO-KT03-A10F
(2) 15' length
–
FGS-KT03-A15F
FGSO-KT03-A15F
4x4 single 2" flex tube attachment; no 4x4 junction kit required
•
401326IN
Downspout Note: If a trumpet flare is required use
a 4x4 flare (FGS-MTRM-A or FGSO-MTRM-A)
5' length
–
FGS-KT03-A1
FGSO-KT03-A1
06/10
4x6 System
4x6 downspouts
10' length
–
FGS-KT03-A1-10F
FGSO-KT03-A1-10F
15' length
–
FGS-KT03-A1-15F
FGSO-KT03-A1-15F
4x4 quad 2" flex tube attachment; no 4x4 junction kit required
(4) 5' length
–
FGS-KT03-A4-5F
FGSO-KT03-A4-5F
(4) 10' length
–
FGS-KT03-A4-10F
FGSO-KT03-A4-10F
(4) 15' length
–
FGS-KT03-A4-15F
FGSO-KT03-A4-15F
4x4 quad 7/8" flex tube attachment; no 4x4 junction kit required
(4) 5' length
–
FGS-KT07-A4-5F
FGSO-KT07-A4-5F
(4) 10' length
–
FGS-KT07-A4-10F
FGSO-KT07-A4-10F
(4) 15' length
–
FGS-KT07-A4-15F
FGSO-KT07-A4-15F
*A 4x4 junction is needed to drop to a fitting or a straight section. This drop junction must be a junction type FGS-MJWR-A.
**Dual downspout requires two covers.
www.adc.com/in
40
4x6 System
(FGS-MCDS-AB)
Extended Downspout
(FGS-MDSP-EX-B
shown with and without cover)
Insertable Downspout
(FGS-MDSP-B/I)
Dual Downspout
(FGS-MDSP-2B)
Dual Downspout
with Divider
(FGS-MDSP-2B-IMP)
Trumpet Flare Kit for 4x6
Dual Downspout
(FGS-MTRM-2B)
Trumpet Flare Kit for Dual
Downspout with Divider
(FGS-MTRM-2B-IMP)
Single 2"
(FGS-KT03-A1)
Trumpet Flare Kit
(FGS-MTRM-A)
(FGS-HDSI-AB)
4" Square to 2" Round
Adapter with Flex Tube
(FGS-ASRI requires
FGS-MJWR-A junction kit)
Dual 2" Flex Tube
Attachment
(FGS-KT03-A)
•
06/10
Downspout Exit Junction Kit
(FGS-MJWR-A)
www.adc.com/in
2" Quad Flex
(FGS-KT03-A4)
41
4x6 System
Downspout
(FGS-MDSP-B)
401326IN
4x6 System
Expandable
Straight Section
(FGS-MVAR-B)
Hinged Cover Kit
for Horizontal
Straight Section
(FGS-MSNC-B/G)
6" Snap-on Cover
for Horizontal
Straight Section
(FGS-MSSC-B/G)
Product Number
Description
Yellow System
Orange System
FGS-MSHS-B
FGSO-MSHS-B
4x6 straight sections
FGS-MVAR-B
FGSO-MVAR-B
Slack storage straight section
FGS-MSHS-STOR-B
FGSO-MSHS-STOR-B
includes three mounting hinges and three clips
FGS-MSNC-B/G
FGSO-MSNC-B/G
6" snap-on cover kit for horizontal straight section;
includes six capture clips with mounting clasps
FGS-MSSC-B/G
FGSO-MSSC-B/G
FGS-DHCP
FGS-DHCP
Kit - 10 black capture clips and 10 hinges*
FGS-DHHC
(Yellow Hinge)
FGSO-DHHC
(Orange Hinge)
4x6 accessories
•
401326IN
Horizontal
Straight Section
(FGS-MSHS-B)
06/10
4x6 System
The unique four-channel design of the 4x6 FiberGuide® straight section allows the standard system
to be attached to the support structure without the need to cut or drill any holes within the trough.
This ensures that the patch cords will not come in contact with any screw heads or bolts, an important
consideration in 4x6 systems where higher cable counts apply increased pressure on patch cords at the
bottom of the trough.
www.adc.com/in
42
4x6 System
The Snap-Fit™ junction assembly is available for the 6-inch FiberGuide®
system. The new junction is a completely tool-less junction. No additional
tools are required for installation or removal. The Snap-Fit Junction
exhibits superior holding force and accommodates support brackets.
A warning label indicating caution around fibre optic cable is included
Product Number
Yellow System
Orange System
4x6 Snap-fit junction
FGS-MFAW-B
FGSO-MFAW-B
4x6 System
Description
06/10
•
401326IN
Snap-Fit Junction
(FGS-MFAW-B)
www.adc.com/in
43
www.adc.com/in
44
4x12 System
Fittings................................................................................. 46
4x12 System
www.adc.com /in
45
4x12 System
Number
of
Junctions
Description
Product Number
Yellow System
Yellow System
Snap-on Cover
Orange System
Orange System
Snap-on Cover
401326IN
•
06/10
4x12 System
4x12 fittings
Horizontal T
3
FGS-MHRT-F
FGS-SHRT-F
FGSO-MHRT-F
FGSO-SHRT-F
Horizontal cross
4
FGS-MHXP-F
FGS-SHXP-F
FGSO-MHXP-F
FGSO-SHXP-F
2
FGS-MH9E-F
FGS-SH9E-F
FGSO-MH9E-F
FGSO-SH9E-F
90° down elbow
2
FGS-MD9E-F
FGS-SD9E-F
FGSO-MD9E-F
FGSO-SD9E-F
2
FGS-MH4E-F
FGS-SH4E-F
FGSO-MH4E-F
FGSO-SH4E-F
45° up elbow
2
FGS-MU4E-F
FGS-SU4E-F
FGSO-MU4E-F
FGSO-SU4E-F
45° down elbow
2
FGS-MD4E-F
FGS-SD4E-F
FGSO-MD4E-F
FGSO-SD4E-F
Horizontal T
with single 6" exit
(2) 4x12,
(1) 4x6
FGS-MHRT-F/B
FGS-SHRT-F/B
FGSO-MHRT-F/B
FGSO-SHRT-F/B
Horizontal cross
with two 6" exits
(2) 4x12,
(2) 4x6
FGS-MHXP-B/F
FGS-SHXP-B/F
FGSO-MHXP-B/F FGSO-SHXP-B/F
4x12 to dual 4x6 adapter
(1) 4x12,
(2) 4x6
FGS-MDSA-F2B
FGS-SDSA-F2B
FGSO-MDSA-F2B FGSO-SDSA-F2B
4x12 to single 4x6 adapter
(1) 4x12,
(1) 4x6
FGS-MDSA-FB
FGS-SDSA-FB
FGSO-MDSA-FB
4x12 conversions
4x12 to 4x6 right adapter;
includes fastening hardware
FGS-MDSA-FB-R
FGSO-MDSA-FB-R
Fixed metal cover
for right adapter
FGS-VDSA-FB-R
FGS-VDSA-FB-R
4x12 to 4x6 left adapter;
includes fastening hardware
FGS-MDSA-FB-L
FGS-MDSA-FB-L
Fixed metal cover
for left adapter
FGS-MDSA-FB-L
FGS-MDSA-FB-L
FGSO-SDSA-FB
2
FGS-MVAR-B
–
FGSO-MVAR-B
–
4" Cut-in T;
–
FGS-MHIS-A
–
FGSO-MHIS-A
–
6" Cut-in T;
–
FGS-MHIS-B
–
FGSO-MHIS-B
–
12" Cut-in T;
–
FGS-MHIS-F
–
FGSO-MHIS-F
–
Cut-in T fixture
–
FGS-MHIS-JIG-A/B/F
–
FGS-MHIS-JIG-A/B/F
–
4x12 end cap
FGS-HMEC-F
FGS-HMEC-F
4x12 variable support locator kits for; Each kit contains all necessary mounting hardware. Fitting sold separately.
FGS-MDSP-F (downspout)
FGS-MDSP-F-VS
FGS-MDSP-F-VS
FGS-MHRT-F (horizontal T)
FGS-MHRT-F-VS
FGS-MHRT-F-VS
FGS-MHXP-F (horizontal cross)
FGS-MHXP-F-VS
FGS-MHXP-F-VS
FGS-MH9E-F (90° horizontal elbow)
FGS-MH9E-F-VS
FGS-MH9E-F-VS
FGS-MHRT-F/B (horizontal T – 6"/12")
FGS-MHRT-F/B-VS
FGS-MHRT-F/B-VS
FGS-MHXP-B/F (horizontal cross– 6"/12") FGS-MHXP-B/F-VS
FGS-MHXP-B/F-VS
www.adc.com/in
46
4x12 System
Horizontal Cross
(FGS-MHXP-F)
(FGS-MH9E-F)
90° Down Elbow
(FGS-MD9E-F)
(FGS-MH4E-F)
45° Up Elbow
(FGS-MU4E-F)
45° Down Elbow
(FGS-MD4E-F)
Horizontal T
with Single 6" Exit
(FGS-MHRT-F/B)
Horizontal Cross
with Two 6" Exits
(FGS-MHXP-B/F)
4x12 to Dual 4x6
Adapter
(FGS-MDSA-F2B)
4x12 to Single 4x6
Adapter
(FGS-MDSA-FB)
4x12 to 4x6
Adapter – Right
(FGS-MDSA-FB-R)
4x12 to 4x6 Adapter – Left
(FGS-MDSA-FB-L)
End Cap
(FGS-HMEC-F)
Expandable
Straight Section
(FGS-MVAR-F)
12" Cut-in T
(FGS-MHIS-F)
Cut-in T Fixture
(FGS-MHIS-JIG-A/B/F shown
on a straight section)
Snap-on Cover
(FGS-SH4E-F
shown separate)
www.adc.com/in
Snap-on Cover
Installation
Snap-on Cover
(FGS-SH4E-F shown installed)
47
•
06/10
4x12 System
Horizontal T
(FGS-MHRT-F)
401326IN
4x12 System
An array of 4x12 downspouts and attachments are available to feed fibre from overhead straight
sections into fibre optic equipment below. The 4x12 downspout features a 4x6 exit and accepts the 4x6
exit attachments listed below.
Number of
Junctions
Description
Yellow System
Product Number
Orange System
Product Number
401326IN
•
Downspout
2*
FGS-MDSP-F
FGSO-MDSP-F
Cover for 4x12 downspout
–
FGS-SDSP-F
FGSO-SDSP-F
–
FGS-MDSP-F/I
FGSO-MDSP-F/I
Trumpet flare
–
FGS-MTRM-F
FGSO-MTRM-F
Downspout with rear T
–
FGS-MDRT-F
FGSO-MDRT-F
Island T with spool and factory installed
trumpet flare; designed for use over
ADC KRONE Next Generation Frame
Storage Bay
–
FGS-ISLAND-F
FGSO-ISLAND-F
Island T with trumpet and dividing spool;
designed for use over ADC KRONE 600 mm
wide Next Generation Frame – Variable
Support Locator Kit included
FGS-ISLAND-F-513
FGSO-ISLAND-F-513
Island T with recessed dividing spool
FGS-ISLAND3-F
FGSO-ISLAND3-F
4x12 attachments
4x6 dual 2" flex tube attachment
5' length
–
FGS-KT03-B
FGSO-KT03-B
10' length
–
FGS-KT03-B-10F
FGSO-KT03-B-10F
15' length
–
FGS-KT03-B-15F
FGSO-KT03-B-15F
FGS-MTRM-B
FGSO-MTRM-B
FGS-HDSI-F/D
FGS-HDSI-F/D
4x6 trumpet flare kit;
used on 4x12 downspouts
4x12 to 4x4 downspout converter;
converts downspout opening to accept
4x4 slotted duct
–
4x12 to 2x2 downspout converter
–
FGS-HDSI-F/C
FGS-HDSI-F/C
*An additional junction is needed if drop is to fitting or straight section. This 4x6 junction must be a junction type
FGS-MFAW-B.
06/10
4x12 System
4x12 downspouts
www.adc.com/in
48
4x12 System
(FGS-SDSP-F)
Downspout
with Rear T
(FGS-MDRT-F)
Island T
(FGS-ISLAND-F)
4x6 Dual 2"
(FGS-KT03-B)
(FGS-MTRM-B shown alone and
attached to 4x12 Downspout)
Trumpet Flare
(FGS-MTRM-F)
Island T with Recessed
Dividing Spool
(FGS-ISLAND3-F shown with
12" Junction, 90º Down Elbow
and Trumpet Flare)
4x12 to 4x4
Downspout Converter
(FGS-HDSI-F/D)
06/10
The FGS-HSDI-F/D attached to both the 4x12 downspout and
the 4x4 slotted duct without the use of hardware
www.adc.com/in
49
4x12 System
Downspout
(FGS-MDSP-F)
•
401326IN
4x12 System
401326IN
The 4x12 system covers feature a snap-on design. This allows the cover to be used in environments with
limited headroom. Two 3-foot cover sections come with each order, making it easy for one person to
remove the covers. Each cover kit includes a tether kit. The straight section covers are designed to be
placed over the 4x12 downspouts, speeding installation time by reducing the number of measurements
and cuts that need to be made.
(FGS-MSHS-F)
Horizontal Straight Section Cover
(FGS-MSSC-F includes two 3' Lengths
and Tethering Hardware)
(FGS-MVAR-F)
12" Hinged Cover for Horizontal
Straight Section
(FGS-MSNC-F)
Straight Section Cover in
Tethered Position
Straight Section Cover
Attached to Straight Section
•
Product Number
Description
06/10
4x12 System
The unique nine-channel design of the 4x12 FiberGuide® straight section provides unmatched strength
and allows the attachment of support structure without the need to cut or drill holes within the
raceway. This ensures that the patch cords will not come in contact with any screw heads or bolts,
an important consideration in 4x4, 4x6, and 4x12 systems where higher cable counts apply increased
pressure on the patch cords at the bottom of the raceway.
Yellow System
Orange System
FGS-MSHS-F
FGSO-MSHS-F
FGS-MVAR-F
FGSO-MVAR-F
Slack storage straight section
FGS-MSHS-STOR-F
FGSO-MSHS-STOR-F
includes five mounting hinges and three clips
FGS-MSNC-F
FGSO-MSNC-F
Snap-on cover kit* for horizontal straight section;
includes 3' covers, optional tethering kit
FGS-MSSC-F
FGSO-MSSC-F
FGS-DHCP
FGS-DHCP
Kit - 10 black capture clips and 10 hinges
FGS-DHHC
FGSO-DHHC
4x12 accessories
www.adc.com/in
50
4x12 System
(FGS-MFAW-F)
Product Number
Description
4x12 Snap-Fit junction
Yellow System
Orange System
FGS-MFAW-F
FGSO-MFAW-F
4x12 System
™
06/10
•
401326IN
The new Snap-Fit™ junction is available for the 12-inch FiberGuide®
system. The Snap-Fit junction is a completely tool-less junction.
No additional tools are required for installation or removal. The
Snap-Fit junction exhibits superior holding force and accommodates
support brackets.
www.adc.com/in
51
www.adc.com/in
52
4x24 System
Fittings................................................................................. 54
Downspouts......................................................................... 55
4x24 System
Straight Section and Snap-Fit™ Junction............................... 56
www.adc.com /in
53
4x24 System
401326IN
•
06/10
4x24 System
End Cap
(FGS-HMEC-H)
Horizontal Cross with
Dual 12" Exits
(FGS-MHXP-F/H)
Horizontal Cross
(FGS-MHXP-H)
(FGS-MH4E-H)
Horizontal T
with Single 12" Exit
(FGS-MHRT-H/F)
12" Cut-in T
(FGS-MHIS-F/H)
Product Number
Description
Yellow System
Orange System
4x24 fittings
45° horizontal ebow
FGS-MH4E-H
FGSO-MH4E-H
Horizontal T with single 12" exit
FGS-MHRT-H/F
FGSO-MHRT-H/F
Horizontal T with three 24" exits
FGS-MHRT-H
FGSO-MHRT-H
Horizontal cross
FGS-MHXP-H
FGSO-MHXP-H
Horizontal cross with dual 12" exits
FGS-MHXP-F/H
FGSO-MHXP-F/H
45° up elbow
FGS-MU4E-H
FGSO-MU4E-H
45° down elbow
FGS-MD4E-H
FGSO-MD4E-H
12" cut-in T for 4x24*
FGS-MHIS-F/H
FGSO-MHIS-F/H
FGS-MHIS-B/H
FGSO-MHIS-B/H
4x24 conversions
FGS-MHIS-A/H
FGSO-MHIS-A/H
4x24 to 4x12 adapter
FGS-MDSA-HF
FGSO-MDSA-HF
FGS-HMEC-H
FGSO-HMEC-H
4x24 end cap
*Designed exclusively for the 4x24" system.
www.adc.com/in
54
4x24 System
Downspouts – 4" H x 24" W
Island T with Single 12" Exit
(FGS-ISLAND-H/F)
Trumpet Flare
(FGS-MTRM-H)
Product Number
Description
Yellow System
Orange System
Island T with single 12" exit
FGS-ISLAND-H/F
FGSO-ISLAND-H/F
Trumpet flare
FGS-MTRM-H
FGS-MTRM-H
06/10
•
4x24 System
401326IN
4x24 downspouts and attachments feed fibre from overhead straight sections into
fibre optic equipment below.
www.adc.com/in
55
4x24 System
Straight Section and Snap-Fit™ Junction – 4" H x 24" W
Straight Section
(FGS-MSHS-H)
Product Number
Description
Yellow System
Orange System
4x24 straight section; horizontal straight section, 6' long
FGS-MSHS-H
FGSO-MSHS-H
Snap-fit Junction
The Snap-Fit™ Junction assembly is available for the 24-inch
FiberGuide® System. The Snap-Fit junction is a completely toolless junction. No additional tools are required for installation
or removal. The junction exhibits superior holding force and
accommodates support brackets. A warning label is included
Snap-Fit junction
(FGS-MFAW-H)
Product Number
Description
4x24 Snap-Fit junction
™
Yellow System
Orange System
FGS-MFAW-H
FGSO-MFAW-H
•
401326IN
The unique double wall channel design of the 4x24 straight
section provides exceptional strength and durability for high
fibre count applications and allows the standard system to be
attached to the support structure without the need to cut or
drill any holes within the trough. The six channel design ensures
that the patch cords will not come in contact with any screw
heads or bolts, an important consideration in 4x24 systems
where higher cable counts apply increased pressure on patch
cords at the bottom of the trough.
06/10
4x24 System
Straight Section
www.adc.com/in
56
4-Inch Express Exit................................................................ 58
2-Inch Express Exit................................................................ 59
Low-Profile Express Exit........................................................ 59
Attachments......................................................................... 60
www.adc.com /in
57
For 4x4, 4x6, 4x12, and 4x24 Systems
401326IN
Express
Exit™ Style
Height Above
Sidewall
Exit
Opening
3 mm Patch Cord
Capacity
2 mm Patch Cord
Capacity
Hinged
Rear Cover
Exit Fin
Inserts
2-Inch
Express Exit™
4"
2" x 2"1
150
350
No
No
Low-Profile
Express Exit™
2"
2" x 2"1
150
350
No
No
4-Inch
Express Exit™
4"
4" x 4"2
300
700
Yes
Yes
Accepts all standard 2x2" attachments.
Accepts all standard 4x4" attachments.
1
2
4-Inch Express Exit™
The 4-Inch Express Exit™ is designed to distribute and manage
medium cable counts to FOT or ODF equipment. It features
a 4-inch by 4-inch exit opening to accept all standard 4x4
downspout attachments and includes insertable exit fins and
removable rear cable guides for additional cable management.
See page 90 for 4-Inch Express Exit™ downspout attachments.
•
Product Number
Description
06/10
Express Exit Family
ADC KRONE's patented* Express Exit™ family accommodates
various raceway environments and applications. By simply securing
an Express Exit™ to the sidewall of any 4x4, 4x6, 4x12, or 4x24
FiberGuide® straight section, jumpers can be permanently or
temporarily routed to fibre optic terminal (FOT) equipment below.
No cutting of the FiberGuide® system is required. Positioning a
drop with a member of the Express Exit™ family greatly simplifies
installation, protects the integrity of fibres already present in the
raceway, and increases overall flexibility of the raceway system. All
Express Exits™ guarantee 2-inch bend radius protection.
4-inch Express Exit™
Yellow System
Orange System
FGS-MEXP-E-A/B/F
FGSO-MEXP-E-A/B/F
Express Exit™ rear hinged cover kit;
one 4x4, 4x6, 4x12 rear hinged cover
FGS-MEXC-E-A/B/F
FGSO-MEXC-E-A/B/F
Express Exit™ rear hinged cover for 4x4 raceway
FGS-MEXC-E-A
FGSO-MEXC-E-A
Express Exit™ rear hinged cover for 4x6 raceway
FGS-MEXC-E-B
FGSO-MEXC-E-B
FGS-MEXC-E-F
FGSO-MEXC-E-F
Express Exit™; base, base cover, mounting hardware, support
bracket, and exit inserts included
4-inch accessories
™
Express Exit rear hinged cover for 4x12 raceway
*Other patents pending.
www.adc.com/in
58
For 4x4, 4x6, 4x12, and 4x24 Systems
The 2-Inch Express Exit™, ADC KRONE's initial offering in the
Express Exit™ product family, accommodates up to 350, 2 mm
patch cords. The patch cords are routed from a 4x4, 4x6, 4x12 or
4x24 straight section to FOT equipment below the raceway.
2-Inch Express Exit
Product Number
Description
2-Inch Express Exit ; base, base cover, mounting hardware
and support bracket included
™
Yellow System
Orange System
FGS-MEXP-A/B/F
FGSO-MEXP-A/B/F
Designed for low-ceiling or height-restricted environments, the
Low-Profile Express Exit™ features a front-removable cover and
extends only 2 inches above the FiberGuide® straight section
sidewall. It also includes removable rear cable guides for additional
cable management.
Low-Profile Express Exit
Product Number
Description
Yellow System
Orange System
Low-Profile Express Exit™; base, base cover, mounting
hardware and support bracket included
FGS-MEXP-LP-A/B/F
FGSO-MEXP-LP-A/B/F
Attachments for 2-Inch Express Exit™ and Low-Profile Express Exit™
06/10
Product Number
Description
Yellow System
Orange System
2x2 trumpet flare; junction included
FGS-MTRM-C
FGSO-MTRM-C
Single 2" flex tube attachment; 2" flex tube and a 2x2 junction to attach to Express Exit unit included
5' length
FGS-MEX1-C-5F
FGSO-MEX1-C-5F
10' length
FGS-MEX1-C-10F
FGSO-MEX1-C-10F
15' length
FGS-MEX1-C-15F
FGSO-MEX1-C-15F
Dual 7/8" flex tube attachment;
two lengths of 7/8" flex tube and a 2" junction to attach to Express Exit unit included
(2) 5' lengths
FGS-KT03-C
FGSO-KT03-C
(2) 10' lengths
FGS-KT03-C-10F
FGSO-KT03-C-10F
(3) 15' lengths
FGS-KT03-C-15F
FGSO-KT03-C-15F
www.adc.com/in
59
•
401326IN
www.adc.com/in
60
2x2 and 2x1 Vertical Slotted Duct Kits and Components..... 62
4x4 and 2x4 Vertical Slotted Duct Kits and Components..... 63
www.adc.com /in
61
2"x 2" Vertical Slotted Duct Kit
1.5" Slot Spacing
(FGS-KTW1-CA)
2"x 2" Vertical Solid Duct Kit
(FGS-KTW4-C)
2"x 1" Vertical Slotted
Duct Kit
(FGS-KTW1-E)
2"x 2" to 2"x 1"
Conversion Piece
(FGS-ACC063)
2"x 2" Vertical Duct Universal
Mounting Brackets
(FGS-HWMB-C)
Product Number
Description
Yellow System
Orange System
FGS-KTW1-C
FGSO-KTW1-C
Vertical slotted duct kits; 6' long – duct, cover,
hose end clamp and five universal mounting brackets included
2x2 (4" slot spacing)
2x2 (1.5" slot spacing)
FGS-KTW1-CA
FGSO-KTW1-CA
2x2 solid duct kit
FGS-KTW4-C
FGSO-KTW4-C
2x1 (4" slot spacing)
FGS-KTW1-E
FGSO-KTW1-E
2x1 solid duct kit
FGS-KTW4-E
FGSO-KTW4-E
2x2 to 2x1 conversion piece; order when converting from
2x2 to 2x1 system
FGS-ACC063
FGSO-ACC063
2x2 vertical slotted (4" slot spacing) duct; 6' long
FGS-MSHS-C
FGSO-MSHS-C
Components
•
401326IN
2"x 2" Vertical Slotted Duct Kit
4" Slot Spacing
(FGS-KTW1-C)
2x2 vertical slotted (1.5" slot spacing) duct; 6' long
FGS-MSHS-CA
FGSO-MSHS-CA
06/10
2"x 2" and 2"x 1"
Cover for 2x2 duct; 6' long
FGS-MSHC-C
FGSO-MSHC-C
2x2 vertical slotted duct cover clip
FGS-CLIP-C
FGS-CLIP-C
2x2 vertical slotted duct universal mounting bracket;
kit of 5 – typically five brackets used for every 6' section
of 2x2 vertical duct
FGS-HWMB-C
FGS-HWMB-C
www.adc.com/in
62
4"x 4" and 2"x 4"
06/10
•
2"x 4" Vertical
Slotted Duct Kit
(FGS-KTW2-E)
4"x 4" Vertical Slotted
Adapter Junction Kit
(FGS-MJWR-D)
4"x 4" Vertical Duct
Mounting Bracket
(FGS-HWMB-D)
Product Number
Description
Yellow System
Orange System
4x4 (4 slot spacing) duct kit;
6' long; duct, cover and three mounting brackets included
FGS-KTW2-D
FGSO-KTW2-D
2x4 (1.5 slot spacing) duct kit;
6' long; duct, cover and three mounting brackets included
FGS-KTW2-E
FGSO-KTW2-E
4x 4 adapter junction kit; used to join 4x4 vertical duct to
standard 4x4 FiberGuide® profile
FGS-MJWR-D
FGSO-MJWR-D
4x4 vertical slotted duct; 6' long
FGS-MSHS-D
FGSO-MSHS-D
Cover for 2x4 and 4x4 vertical slotted duct; 6' long
FGS-MSHC-D
FGSO-MSHC-D
4x4 vertical slotted duct mounting bracket;
typically three brackets used for every 6' section of 4x4
vertical duct
FGS-HWMB-D
FGS-HWMB-D
2x4 vertical slotted duct mounting bracket; kit of 10
FGS-HKW2-E
FGS-HKWZ-E
2x4 vertical slotted duct cap
FGS-HMEC-E
FGS-HMEC-E
FGS-CLIP-E
FGS-CLIP-E
FGS-CLIP-D
FGS-CLIP-D
2x4 vertical slotted trumpet flare
FGS-MTRM-E
FGSO-MTRM-E
Vertical slotted duct kits
Components
www.adc.com/in
63
401326IN
4"x 4" Vertical
Slotted Duct Kit
(FGS-KTW2-D)
www.adc.com/in
64
Support Kits
2x2 System........................................................................... 66
2x6, 4x4, 4x6 Systems.......................................................... 68
4x12 System......................................................................... 69
Support Kits
4x24 System......................................................................... 70
www.adc.com /in
65
2x2 System Support Kits
For Yellow and Orange Systems
Bay Top Support Short L
Bracket Kit
(FGS-BTBS-C)
Digital Cableway
Support Kit
(FGS-HDCB-C)
Under Floor Support Kit
(FGS-HUFB-C shown alone and
attached to .62" round pipe)
Bay Top Support Long L
Bracket Kit
(FGS-BTBL-C)
Description
Product Number
2x2 direct support kits
Ladder rack support kit; for use with 3.5" (maximum) ladder rack
FGS-HLR2-C
Bay top support short L bracket kit
FGS-BTBS-C
Bay top support long L bracket kit
FGS-BTBL-C
Digital cableway support kit
FGS-HDCB-C
Under floor support kit; can be secured to .62" to 1.2" round or square post
FGS-HUFB-C
Note: R
ecommended spacing of direct support kits is every 2' to 3'.
Custom brackets are available, please contact ADC KRONE.
•
401326IN
Ladder Rack Support Kit
(FGS-HLR2-C shown alone and
attached to ladder rack)
06/10
Support Kits
Direct Support Kits
www.adc.com/in
66
Aluminum Track Support Kit
(FGS-HASK-C)
New Threaded Rod Bracket Kit
(FGS-HTR2-XX shown alone and
attached to aluminum track support)
Existing Threaded Rod
Bracket Kit
(FGS-HTR2-2-5/8)
Description
Product Number
2x2 aluminum track support kit; 6' long, track connecting bar kit included –
aluminum track is self-supporting for spans up to 6'
FGS-HASK-C
2x2 bracket kits; used to support aluminum track kits
New threaded rod bracket kit; 5/8"
FGS-HTR2-5/8
New threaded rod bracket kit; 1/2"
FGS-HTR2-1/2
Existing threaded rod bracket kit; 5/8" for up to two 2x2 FiberGuide® Systems
FGS-HTR2-2-5/8
Track connecting bar kit;
used to join two aluminum track kits; order only if extras are needed
FGS-HAEJ-C
06/10
•
Support Kits
401326IN
www.adc.com/in
67
2x6, 4x4, 4x6 System Support Kits
401326IN
•
06/10
Support Kits
Ladder Rack Cantilever
Support Bracket Kit
(FGS-HDLB-4)
L Bay Support Bracket Kit
(FGS-HLBK shown alone and
attached to 4x4 FiberGuide®)
New Threaded Rod Bracket kit
(FGS-HNTR-XX shown alone and
attached to threaded rod)
Bracket Kit
(FGS-HETR-XX shown alone and
Modified New Threaded Rod Bracket Kit
(FGS-HNTR-5/8-A shown alone
and attached to threaded rod)
Top Support Low Profile
C-bracket Kit
(FGS-HNTS-XX-LP)
Top Support C-Bracket Kit
(FGS-HNTS-XX)
Modified Existing Threaded Rod Bracket Kit
(FGS-HETR-5/8-A shown alone and
Center Support Bracket Kit
(FGS-HTUB-XX)
Description
Product Number
2x6, 4x4, 4x6 system support kits
Ladder rack cantilever support bracket kit
FGS-HDLB-3
L bay support bracket kit
FGS-HLBK
New threaded rod bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm, 18 mm)
FGS-HNTR-XX
Existing threaded rod bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm)
FGS-HETR-XX
Modified new threaded rod bracket kit; 5/8"
FGS-HNTR-5/8-A
Top support low-profile C-bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm)
FGS-HNTS-XX-LP
Top support C-bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm)
FGS-HNTS-XX
Modified existing threaded rod bracket kit; 5/8"
FGS-HETR-5/8-A
Center support bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm, 20 mm)
FGS-HTUB-XX
Digital cableway bracket kit; 305 mm (12")
FGS-HCBL-12
Digital cableway bracket kit; 381 mm (15")
FGS-HCBL-15
Ladder rack center support bracket kit
FGS-HNLR-AB
OMX frame center support bracket kit; 16 mm (.63")
FGS-HOMX-16MM
Under floor support bracket kit
FGS-HUFB-A
Custom brackets are available, please contact ADC KRONE.
www.adc.com/in
68
06/10
•
Existing Ladder Rack Center
Support Bracket Kit
(FGS-HETP-F-XX)
Top Support Low-Profile
Threaded Rod Bracket Kit
(FGS-HNTS-F-XX-LP shown alone
Trapeze Bracket Kit
(FGS-HNTP-F-XX)
Center Support Threaded
Rod Bracket Kit
(FGS-HTUB-F-XX shown alone
Top Support Threaded Rod
Bracket Kit
(FGS-HNTS-F-XX)
(FGS-HNTR-F-XX)
Support Kits
401326IN
For Yellow and Orange System
Bracket Kit
(FGS-HETR-F-XX)
Description
Product Number
4x12 system support kits
New ladder rack center support bracket kit
FGS-HNLR-F
Existing ladder rack center support bracket kit;
(XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm)
FGS-HETP-F-XX
Trapeze bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm)
FGS-HNTP-F-XX
Center support threaded rod bracket kit;
(XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm, 20 mm)
FGS-HTUB-F-XX
Top support low-profile threaded rod C-bracket kit;
(XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm)
FGS-HNTS-F-XX-LP
Top support threaded rod C-bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm)
FGS-HNTS-F-XX
New threaded rod bracket kit; (XX = size: 5/8", 14 mm, 16 mm, 18 mm)
FGS-HNTR-F-XX
Existing threaded rod bracket kit; (XX = size: 5/8", 14 mm, 16 mm)
FGS-HETR-F-XX
www.adc.com/in
69
For Yellow and Orange System
401326IN
•
06/10
Support Kits
Variable Fitting Support Locator
Kit – Horizontal Elbow
(FGS-MH4E-H-VS)
Variable Fitting Support Locater Kit –
Horizontal T with Single 12" Exit
(FGS-MHRT-H/F-VS)
Variable Support Bracket - Horiz. Elbow
(FGS-MH4E-H-VS)
Variable Support Bracket - Horiz. T
(FGS-MHRT-H/F-VS)
Horizontal Cross with Dual 12" Exits
(FGS-MHXP-F/H-VS)
Variable Fitting Support
Locater Kit – Horizontal Cross
(FGS-MHXP-H-VS)
Variable Support Bracket - Horiz. Cross
(FGS-MHXP-F/H-VS)
Threaded Rod Ref
Split Nut
Bracket
Clip
12.7 mm
(.5")
Variable
Support Bracket - Horiz. Cross
(FGS-MHXP-H-VS)
Quick Knob
Existing Threaded Rod Trapeze Bracket
844.6 mm
(33.25")
736.6 mm
(29")
50.8 mm
(2")
50.8 mm
(2")
Existing 5/8” Threaded Rod Trapeze Bracket Kit
(FGS- HETP-H-5/8)
Description
Existing 5/8” Threaded Rod Trapeze Bracket Kit
793.8 mm
(31.25")
736.6 mm
(29")
New 5/8” Threaded Rod Trapeze Bracket Kit
(FGS-HNTP-H-5/8)
New 5/8” Threaded Rod Trapeze Bracket Kit
(FGS-HNTP-H-5/8)
Product Number
(FGS- HETP-H-5/8)
Variable fitting support locater kit for;
Horizontal elbow
FGS-MH4E-H-VS
Horizontal T with single 12" exit
FGS-MHRT-H/F-VS
Horizontal cross
FGS-MHXP-H-VS
Horizontal cross with dual 12" exits
FGS-MHXP-F/H-VS
Threaded rod trapeze bracket kit for;
Existing; 5/8"
FGS-HETP-H-5/8
New; 5/8"
FGS-HNTP-H-5/8
www.adc.com/in
70
Accessories
System Accessories............................................................... 72
Accessories
Support Kit Accessories........................................................ 74
www.adc.com /in
71
System Accessories
Product Number
Description
Yellow System
Orange System
Trough cover clip kit
FGS-KT09
FGS-KT09
2" outer diameter slotted flex tube;
(X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250)
FGS-MIDY-XF
FGSO-MIDY-XF
1" outer diameter slotted flex tube;
(X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250)
FGS-MLDY-XF
FGSO-MLDY-XF
7/8" outer diameter slotted flex tube;
(X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250)
FGS-MFTY-XF
FGSO-MFTY-XF
2" outer diameter solid flex tube;
(X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250)
FGS-MISY-XF
FGSO-MISY-XF
Hinges; single hinges for 4x4 and 4x6 covers
FGS-HHGK
FGS-HHGK
Retainer rings; kit of 10 – used to retain fibres in 2" flex tube
FGS-HFRR-10
FGS-HFRR-10
Flex tube clamp; kit of 10 – used to secure 2" flex tube to 2"
vertical ducts
FGS-HHEC-10
FGS-HHEC-10
Storage spools for dark fibre jumpers; kit of 2
FGS-MSTOR-A/B/F
FGS-MSTOR-A/B/F
Used to cut 2x2, 4x4, 4x6, and 4x12 FiberGuide®
straight sections to size
FGS-MKIT-ABF
FGS-MKIT-ABF
Used to cut 2x2, 4x4, and 4x6 FiberGuide® straight sections to
size
FGS-MKIT
FGS-MKIT
4x4 system
FGS-HIFC-A
FGS-HIFC-A
4x6 system
FGS-HIFC-B
FGS-HIFC-B
4x12 system
FGS-HIFC-F
FGS-HIFC-F
Quick knobs with T-bolt; kit of 10
FGS-KQKB
FGS-KQKB
Reverse junction adapter kit for 4x4, 4x6, and 4x12 systems;
used to connect two parts rotated 180°
FGS-HRJA-A/B/F
FGS-HRJA-A/B/F
Retrofit fin; kit of 10
FGS-MFIN-10
FGS-MFIN-10
IFC tie down for;
•
401326IN
Mitre box with saw
06/10
Accessories
Slotted and solid flex tubes
www.adc.com/in
72
2" Outer Diameter
Slotted Flex Tube
(FGS-MIDY)
7/8" Outer Diameter
Slotted Flex Tube
(FGS-MFTY)
Single Hinges for
4" and 6" Covers
(FGS-HHGK)
Retainer Rings
(FGS-HFRR-10)
Flex Tube Clamp
(FGS-HHEC-10)
Storage Spools
(FGS-MSTOR-A/B/F)
Shown Installed
(FGS-MSTOR-A/B/F)
Mitre Box and Saw
(FGS-MKIT-ABF)
Retrofit Fin – Kit of 10
(FGS-MFIN-10)
Quick Knobs - Kit of 10
(FGS-KQKB)
06/10
•
Accessories
401326IN
System Accessories
www.adc.com/in
73
Support Kit Accessories
401326IN
•
06/10
Accessories
Threaded Rod
(FGS-HTHR)
Auxiliary Framing Kit
(FGS-HFCK)
Ladder Rack Bracket Kit
FGS-HLDR shown alone and
attached to ladder rack
Unistrut Nut Kit
(FGS-HDGR)
Adjustable Angle
Support Brackets
(FGS-HASB)
Description
Product Number
Threaded rod
5/8" - 11 x 12"
FGS-HTHR-5/8-12
5/8" - 11 x 30"
FGS-HTHR-5/8-30
5/8" - 11 x 72"
FGS-HTHR-5/8-72
1/2" - 13 x 12"
FGS-HTHR-1/2-12
1/2" - 13 x 30"
FGS-HTHR-1/2-30
1/2" - 13 x 72"
FGS-HTHR-1/2-72
Threaded rod;
(XX = size: 12 mm, 14 mm, 16 mm) (NN = length: 30 cm, 75 cm, 180 cm)
FGS-HTHR-XX-NN
Auxiliary framing kit
2x 9/16" x 3/16" for 5/8" rod
FGS-HFCK-5/8
2x 9/16" x 3/16" for 1/2" rod
FGS-HFCK-1/2
Adjustable angle support brackets with 5/8" threaded rod
11 x 36" rod
FGS-HASB-5/8-36
11 x 48" rod
FGS-HASB-5/8-48
Adjustable angle support brackets with 1/2" threaded rod
13 x 36" rod
FGS-HASB-1/2-36
13 x 48" rod
FGS-HASB-1/2-48
Ladder rack bracket kit for radiused ladder racking
FGS-HLDR-A
Ladder rack bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm)
FGS-HLDR-XX
Unistrut nut kit; 5/8"
FGS-HDGR
Frame mounting hardware kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm)
FGS-HKFM-XX
www.adc.com/in
74
Part Drawings
2x2 System Part Drawings.................................................... 76
4x12 System Part Drawings.................................................. 85
4x24 System Part Drawings.................................................. 88
Express Exit™ Part Drawings.................................................. 90
2x2 System Support Kit Drawings........................................ 91
2x6, 4x4 and 4x6 System Support Kit Drawings................... 92
4x12 System Support Kit Drawings...................................... 94
Part Drawings
4x24 System Support Kit Drawings...................................... 95
www.adc.com /in
75
2x2 System
Part Drawings
203 mm
(8")
203 mm (8")
56 mm
(2.2")
Top
130 mm
(5.1")
top
26 mm
(10.1")
52 mm
(2.1")
51 mm (2")
Front
Horizontal Cross
(FGS-MHXP-C)
Horizontal T
(FGS-MHTA-C)
127 mm
(4.99")
12 mm
(4.6")
127
51 mm
mm
(4.99")
(2")
top
51 mm
(2")
51 mm
(2")
5 mm
(2")
51 mm
(2")
Front
(FGS-MH9A-C)
(FGS-MH4A-C)
401326IN
171 mm
(6.75")
56 mm
(2.2")
56 mm
(2.22")
117 mm
(5")
171 mm
(6.75")
9 mm
(.34")
53 mm
(2.1")
top
53 mm
(2.1")
•
06/10
Part Drawings
51 mm
(2")
53 mm
(2.1")
End
51 mm
(2")
End
51 mm
(2")
side
End
90° Extended Horizontal Elbow
(FGS-MH9A-C-45/2)
www.adc.com/in
45° Up Elbow
(FGS-MU4A-C)
76
2x2 System
Part Drawings
51 mm
(2")
56 mm
(2.2")
167 mm
(6.6")
53 mm
(2.1")
top
84 mm
(3.3")
51 mm
(2")
115 mm
(4.5")
End
side
102 mm
(4")
112 mm
(4.4")
Front
45° Down Elbow
(FGS-MD4A-C)
(FGS-MDSA-AC)
59 mm
(2.3")
329 mm
(13")
127 mm
(5")
90 mm
(3.5")
139 mm
(5.4")
top
53 mm
(2.1")
128 mm
(5.1")
51 mm
(2")
Front
Standard Downspout
(FGS-MSDS-C)
End
side
Extended Downspout
(FGS-KDH2-C)
51 mm
(2")
51 mm
(2")
End
51 mm (2")
129 mm
(5.1")
side
53 mm
47 mm (2.1")
(1.9")
13 mm (0.5")
13 mm (0.5")
13 mm (0.5")
51 mm
(2")
47 mm
(1.9")
51 mm
(2")
bottom
102 mm (4")
183 mm (72")
(FGS-MSHA-C)
Part Drawings
06/10
•
401326IN
144 mm
(5.7")
90º Up Elbow
(FGS-MU9A-C)
51 mm
(2")
47 mm
(1.9")
53 mm
(2.1") 47 mm
(1.9")
125 mm
(4.9")
51 mm
(2")
90º Down Elbow
(FGS-MD9A-C)
www.adc.com/in
77
2x6 System
Part Drawings
356 mm
(14")
343 mm
(13.5")
343 mm
(13.5")
343 mm
(13.5")
195 mm
(7.7")
269 mm
(10.6")
51 mm
(2")
•
45 mm
(1.75")
152 mm
(6")
152 mm
(6")
45 mm
(1.75")
29 mm
(1.1")
2x6 to 2x2 Downspout
(FGS-MDSP-G)
Horizontal T
(FGS-MHRT-G)
Horizontal Cross
(FGS-MHXP-G)
269 mm
(10.6")
35.6 mm
(1.4")
196 mm
(7.7")
152 mm
(6")
269 mm
(10.6")
36 mm
(1.4")
152 mm
(6")
45 mm
(1.75")
36 mm
(1.4")
45 mm
(1.75")
145 mm
(5.7")
90º Horizontal Elbow
(FGS-MH9E-G)
36 mm
(1.4")
90º Down Elbow
(FGS-MD9E-G)
231 mm
(9.1")
226 mm
(8.9")
45°
36 mm
(1.4")
196 mm
(7.7")
1
06/10
Part Drawings
401326IN
14"
(356 mm)
196 mm
(7.7")
152 mm
(6")
44.5 mm
(1.75")
45º Horizontal Elbow
(FGS-MH4E-G)
www.adc.com/in
152 mm
(6")
44.5 mm
(1.75")
45º Up Elbow
(FGS-MU4E-G)
78
2x6 System
Part Drawings
57 mm
(2.25")
221 mm
(8.7")
196 mm
(7.7")
196 mm
(7.7")
152 mm
(6")
86 mm
(3.4")
53 mm
(2.1")
41 mm
(1.6")
56 mm
(2.2")
114 mm
(4.5")
2x6 to 4x4 Adapter
(FGS-MDSA-GA)
71 mm
(2.8")
2x6 to 4x6 Adapter
(FGS-MDSA-GB)
196 mm
(7.7")
133 mm
(5.2")
Trumpet Flare
(FGS-MTRM-G)
140 mm
(5.5")
152 mm
(6")
268 mm
(10.6")
99 mm
(3.9")
131 mm
(5.16")
47 mm
(1.9")
Low-Profile
Express Exit™ Downspout
(FGS-MEXP-LP-G)
45º Down Elbow
(FGS-MD4E-G)
224 mm
(8.8")
33 mm
(1.31")
70 mm
(2.75")
3 mm
(.125")
152 mm
(6")
71 mm
(2.8")
45 mm
(1.75")
57 mm
(2.25")
06/10
51 mm
(2")
76 mm
(3")
3 mm
(.125")
51 mm
(2")
224 mm
(8.8")
33 mm
(1.31")
119 mm
(4.7")
Part Drawings
262 mm
(10.3")
191 mm
(7.5")
81 mm
(3.2")
401326IN
51 mm
(2")
196 mm
(7.7")
145 mm
(5.7")
•
188 mm
(7.4")
165 mm
(6.5")
70 mm
(2.75")
3 mm
(.125")
Straight Section
(FGS-MSHS-G)
Junction
(FGS-JUNC-G)
188 mm
(7.4")
210 mm
(8.3")
16 mm
(6.25")
24 mm
(1")
Side
End
93 mm
(3.7")
Straight Section
(Not Included)
Hinged Covers for Straight Section
(FGS-MSNC-B/G)
www.adc.com/in
Side
83 mm
(3.25")
End
Straight Section
(Not Included)
Snap-on Covers for Horizontal Straight Section
(FGS-MSSC-B/G)
79
4x4 System
Part Drawings
330 mm
(13")
330 mm
(13")
top
330 mm
(13")
27 mm
(9.3")
top
102 mm
(4")
102 mm
(4")
•
112 mm
(4.4")
Front
Front
Horizontal Cross
(FGS-MHXP-A)
Horizontal T
(FGS-MHRT-A)
237 mm (9.3")
237 mm
(9.3")
120 mm
(4.7")
260 mm
(10.2")
165 mm
(6.5")
r 51 mm
(2")
top
218 mm
(8.6")
side
102 mm (4")
112 mm (4.4")
End
260 mm
(10.2")
Junction Detail
(not included)
218 mm
(8.6")
End
90° Up Elbow
(FGS-MU9E-A)
(FGS-MH9E-A)
208 mm
(8.19")
102 mm
(4")
top
side
End
144 mm
(5.7")
208 mm
(8.2")
223 mm
(8.8")
194 mm
(7.7")
102 mm (4")
112 mm (4.4")
112 mm
(4.4")
End
06/10
Part Drawings
401326IN
112 mm
(4.4")
90° Down Elbow
(FGS-MD9E-A)
www.adc.com/in
(FGS-MH4E-A)
80
4x4 System
Part Drawings
251 mm (10")
102 mm (4")
45°
top
163 mm
(6.4")
203 mm
(8")
Junction Detail
(not included)
r 51 mm
(2")
side
End
166 mm (6.6")
side
124 mm (5")
112 mm
(4.4")
144 mm
(5.7")
210 mm (8.3")
163 mm
(6.4")
123 mm
(4.9")
45° Down Elbow
(FGS-MD4E-A)
45° Up Elbow
(FGS-MU4E-A)
195 mm (7.7")
top
186 mm
(7.3")
356 mm
(14")
retracted straight section
144 mm
(5.7")
102 mm (4")
112 mm (4.4")
559 mm
(22")
Expanded straight section
Front
(FGS-MDSA-AB)
345.2 mm
(13.6")
(FGS-MVAR-A)
254 mm
(10")
159 mm
(6.25")
329 mm
(13")
330 mm
(13")
144 mm
(5.7")
Front
112 mm
(4.4")
top
102 mm
(4")
144 mm
(5.7")
44 mm
(1.75")
160 mm
(6.3")
Part Drawings
102 mm
(4")
•
401326IN
203 mm
(8")
06/10
305 mm
(12")
Cut-in T
(FGS-MHIS-A)
Downspout
(FGS-MDSP-A)
329 mm
(13")
330 mm
(13")
133 mm
(5.25")
211 mm
(8.3")
279 mm
(11")
102 mm
(4")
144 mm
(5.7")
Extended Downspout
(FGS-MDSP-EX-A)
www.adc.com/in
137 mm
(5.4")
.625"
(Not Included)
330 mm
(13")
Side
End
102 mm
(4")
Snap-On Cover
for
4" Straight Section
Straight
Section
(Not Included)
(FGS-MSSC-A)
81
4x4 System
Part Drawings
R 51 mm (2")
oPEn
closE
51 mm (2")
213 mm
(8.4")
76 mm
(3")
top
103 mm
(4")
211 mm
(8.3")
End
159 mm (6.25")
Trumpet Flare
(FGS-MTRM-A)
(FGS-HDSI-AB)
116 mm
(4.6")
144 mm (5.7")
102 mm
(4")
144 mm
(5.7")
102 mm
(4")
117 mm
(4.6")
X
116 mm
(4.55")
183 mm (72")
Dimension X
1.52 m (5')
3.05 m (10')
3.57 m (15')
(FGS-MSHS-A)
4" Square to 2" Round Adapter
with Flex Tube
(FGS-ASRI-X*)
108 mm
(4.25")
159 mm
(6.3")
24 mm
(1")
137 mm
(5.4")
side
End
173 mm
(6.8")
102 mm179 mm
(4.0") (7")
End
Side
143 mm
140 mm(5.6")
(5.51")
•
06/10
Part Drawings
401326IN
104 mm
(4.1")
Straight Section
(Not Included)
Hinged Cover for 4" Horizontal
Straight Section
(FGS-MSNC-A)
102 mm
(4")
Snap-Fit Junction
(FGS-MFAW-A)
*Replace X with tube length as follows: 5F=5 feet, 10F=10 feet, 15F=15 feet
www.adc.com/in
82
4x6 System
Part Drawings
381 mm
(15")
381 mm (15")
288 mm
(11.3")
top
381 mm
(15")
288 mm
(11.3")
288 mm
(11.3")
top
152 mm (6")
152 mm
(6")
112 mm
(4.4")
152 mm
(6")
245 mm
(9.7")
(FGS-MH9E-B)
259 mm
(10.2")
108 mm
(4.25")
86 mm
(3.4")
196 mm
(7.7")
183 mm
(7.2")
13 mm
(.5")
108 mm
(4.25")
112 mm
(4.4")
218 mm
(8.6")
End
(FGS-MH4E-B)
90º Up Elbow
(FGS-MU9E-B)
251 mm (10")
152 mm
(6")
245 mm
(9.7")
top
259 mm
(10.2")
213 mm
(8.4")
112 mm
(4.4")
203 mm
(8")
124 mm (4.9")
End
90° Down Elbow
(FGS-MD9E-B)
152 mm (6")
Junction Detail
(not included)
r 5.1 mm
(2")
side
166 mm
(6.6")
210 mm
(8.3")
45° Up Elbow
(FGS-MU4E-B)
Part Drawings
401326IN
top
•
06/10
Horizontal Cross
(FGS-MHXP-B)
114 mm
(4.5")
112 mm
(4.4")
End
Front
Horizontal T
(FGS-MHRT-B)
top
152 mm
(6")
112 mm
(4.4")
Front
top
45°
203 mm (8")
End
195 mm
(7.7")
side
123 mm
(4.9")
112 mm
(4.4")
163 mm (6.4")
45° Down Elbow
(FGS-MD4E-B)
www.adc.com/in
83
4x6 System
Part Drawings
396 mm
(15.6")
top
263 mm
(10.4")
51 mm
(2")
381 mm
(15")
559 mm
(22")
76 mm
(3")
End
159 mm
(6.25")
152 mm
(6")
oPEn
closE
r 51 mm
(2")
159 mm
(6.25")
356 mm
(14")
356 mm
(14")
(FGS-MVAR-B)
160 mm
(6.3")
195 mm
(7.7")
102 mm
(4")
329 mm
(13")
112 mm
(4.4")
Front
top
Trumpet Flare
(FGS-MTRM-B)
6" Cut-in T
(FGS-MHIS-B)
329 mm (13")
330 mm
(13")
211 mm
(8.3")
144 mm
(5.7")
44 mm
(1.75")
102 mm
(4")
144 mm
(5.7")
Downspout
(FGS-MDSP-B)
Extended Downspout
(FGS-MDSP-EX-B)
195 mm (7.7")
188 mm
(7.4")
152 mm
(6")
401326IN
side
102 mm
(4")
16 mm
(.625")
End
133 mm
(5.25")
End
Side
116 mm
(4.6")
183 mm
(72")
Straight Section
(Not Included)
6" Snap-On Cover for Straight Section
(FGS-MSSC-B/G)
•
(FGS-MSHS-B)
06/10
Part Drawings
305 mm
(12")
108 mm
(4.25")
210 mm
(8.3")
224 mm
(8.8")
24 mm
(1")
138 mm
(5.4")
230 mm
152
mm
(9")
(6.0")
End
Side
140 mm
(5.51")
143
mm
(5.6")
Straight Section
(Not Included)
305 mm
(12")
89 mm (3.5")
diameter
32 mm
(1.25")
152 mm
(6")
Hinged Cover for Straight Section
(FGS-MSNC-B/G)
Snap-Fit Junction Assembly
(FGS-MFAW-B)
www.adc.com/in
Slack Storage Straight Section
(FGS-MSHS-STOR-B)
84
4x12 System
Part Drawings
305 mm
(12")
533 mm
(21")
347 mm
(13.6")
533 mm
(21")
305 mm
(12")
top
533 mm
(21")
440 mm
(17.3")
112 mm
(4.4")
112 mm
(4.4")
347 mm
(13.7")
347 mm
(13.7")
Horizontal Cross
(FGS-MHXP-F)
112 mm
(4.4")
(12")
305 mm
(12")
347 mm
(13.7")
112 mm
(4.4")
440 mm
(17.3")
208 mm
(8.2")
347 mm
(13.7")
440 mm
(17.3")
side
90° Down Elbow
(FGS-MD9E-F)
(FGS-MH9E-F)
305 mm
(12")
112 mm
(4.4")
305 mm
(12")
367 mm
(14.4")
340 mm
(13.4")
112 mm
(4.42")
53.6 mm
(2.11")
135
166 mm
(6.55")
347 mm
(13.7")
398 mm
(15.7")
top
347 mm
(13.7")
210 mm
(8.27")
side
(FGS-MH4E-F)
45° Up Elbow
(FGS-MU4E-F)
163 mm
(6.4")
305 mm
(12")
side
45° Down Elbow
(FGS-MD4E-F)
www.adc.com/in
381 mm
(15")
305 mm
(12")
112 mm
(4.4")
347 mm
(13.7")
25 mm
(1")
347 mm
(13.7")
Part Drawings
06/10
208 mm
(8.2")
top
•
401326IN
Horizontal T
(FGS-MHRT-F)
305 mm
top
top
112 mm 440 mm
(17.3")
(4.42")
152 mm
(6")
195 mm
(7.7")
Horizontal T with (one) 6" Exit
(FGS-MHRT-F/B)
85
4x12 System
Part Drawings
380 mm
(15")
152 mm
(6")
305 mm
(12")
533 mm
(21")
465 mm
(18.3")
112 mm
(4.4")
347 mm
(13.7")
279 mm
(11")
195 mm
(7.7")
152 mm
(6")
4x12 to 4x6 Dual Adapter
(FGS-MDSA-F2B)
Horizontal Cross with (two) 6" Exits
(FGS-MHXP-F/B)
254 mm
(10")
305 mm
(12")
112 mm
(4.4")
347 mm
(13.7")
top
343 mm
(13.5")
113 mm
(4.4")
195 mm
(7.7")
152 mm
(6")
End Cap
(FGS-HMEC-F)
4x12 to 4x6 Adapter
(FGS-MDSA-FB)
548 mm
(21.6")
457 mm
(18")
159 mm
(6.25")
356 mm
(14")
401326IN
305 mm
(12")
112 mm
(4.4")
top
top
347 mm
(13.7")
533 mm
(21")
305 mm
(12")
559 mm
(22")
(FGS-MVAR-F)
508 mm
(20")
12" Cut-in T
(FGS-MHIS-F)
•
06/10
Part Drawings
195 mm
(7.7")
381 mm
(15")
347 mm
(13.7")
63.5 mm
(2.5")
305 mm
(12")
112 mm
(4.42")
top
31.32 mm
(12.3")
88.9 mm
(3.5")
63.5 mm
(2.5")
211 mm
(8.3")
152 mm
(6")
Downspout
(FGS-MDSP-F)
www.adc.com/in
50.8 mm
(2")
414 mm
(16.3")
Trumpet Flare
(FGS-MTRM-F)
86
4x12 System
Part Drawings
318 mm
(12.5")
267 mm
(10.5")
439 mm
(17.3")
173 mm
(6.8")
267 mm
(10.5")
203 mm
(8")
102 mm
(4")
4 mm
(.2")
Island T with Recessed Dividing Spool
(FGS-ISLAND3-F)
89 mm
(3.5")
160 mm
(6.3")
Island T
(FGS-ISLAND-F)
279 mm
(11")
94 mm
(3.7")
102 mm
(4")
533 mm
(21")
38 mm
(1.5")
145 mm
(5.7")
127 mm
(5")
272 mm
(10.7")
73.7 mm
(2.9")
Straight Section
(FGS-MSHS-F)
254 mm
(10")
127 mm
(5")
439 mm
(17.3")
366 mm
(14.4")
422 mm
(16.6")
279 mm
(11")
25 mm
(1")
Side
End
93.2 mm
(3.7")
Straight Section
(Not Included)
Hinged Cover for Horizontal Straight Section
(FGS-MSNC-F)
Downspout with Rear T
(FGS-MDRT-F)
Part Drawings
108 mm
(4.25”)
06/10
•
401326IN
490 mm
(19.3")
382 mm
(15”)
133 mm
(5.2”)
305 mm
(12")
89 mm (3.5")
diameter
108 mm
(4.25")
205 mm
(12”)
Snap-Fit Junction
(FGS-MFAW-F)
www.adc.com/in
Slack Storage Straight Section
(FGS-MSHS-STOR-F)
87
4x24 System
Part Drawings
584 mm
(23")
94 mm
(3.7")
144 mm
(5.7")
576.6 mm
(22.7")
610 mm
(24")
Straight Section
(FGS-MSHS-H)
108 mm
(4.25")
697 mm
(27.5")
102 mm
(4")
89 mm
(3.5")
127 mm
(5")
Snap-Fit Junction
(FGS-MFAW-H)
4 x 24 Straight Section
FGS-MSHS-H
533.1 mm
(20.99")
610 mm
FGS-MFAW-H
(24")
610 mm
(24")
581 mm
(22.9")
120 mm
(4.7")
305 mm
(12")
745 mm
(29.3")
652 mm
(25.7")
120 mm
(4.7")
652 mm
(25.7")
701 mm
(27.6")
347 mm
(13.7")
4x24 45° Horizontal
Elbow
45°
Horizontal Elbow
FGS-MH4E-H (FGS-MH4E-H)
Horizontal T with Single 12" Exit
(FGS-MH4E-H)
4x24 Horizontal T with Single 12" Exit
MGS-MHRT-H/F
533 mm
(21")
610 mm
(24")
652 mm
(25.7")
610 mm
(24")
120 mm
(4.7")
120 mm
(4.7")
305 mm
(12")
838 mm
(33")
652 mm
(25.7")
•
838 mm
(33")
347 mm
(13.7")
Horizontal Cross
with Dual 12" Exits
4x24 Horizontal Cross with (FGS-MHXP-F/H)
Dual 12" Exits
Horizontal Cross
(FGS-MHXP-H)
FGS-MHXP-F/H
FGS-MHXP-H
06/10
Part Drawings
401326IN
838 mm
(33")
795 mm
(31.3")
470 mm
(18.5")
419 mm
(16.5")
645 mm
(25.4")
203 mm
(8")
114 mm
(4.5")
End Cap
(FGS-HMEC-H)
4x24 End Cap
FGS-HMEC-H
160 mm
(6.3")
4 mm
(.2")
Island T with Single 12" Exit
(FGS-ISLAND-H/F)
4x24 Island T with Single 12" Exit
FGS-ISLAND-H/F
www.adc.com/in
4x24 to 4x12 Adapter
(FGS-MDSA-HF)
4x24 x 4x12 Adapter
FGS-MDSA-HF
88
4x24 System
Part Drawings
114 mm
(4.5")
160 mm
(6.3")
736 mm
(29")
610 mm
(24")
78 mm
(3.1")
610 mm
(24")
Trumpet Flare
4x24 Trumpet Kit
(FGS-MTRM-H)
FGS-MTRM-H
4x24 45° Up Elbow
FGS-MU4E-H
45° Up Elbow
(FGS-MU4E-H)
345 mm
(13.6")
128 mm
(5")
330 mm
(13")
117 mm
(4.6")
610 mm
(24")
4" Cut-in T
Adapter Bracket
102 mm
(4")
178 mm
(7")
305 mm
(12")
SIDE
45° Down Elbow
(FGS-MD4E-H)
4" Cut-in T
designed exclusively for the 4x24 System
4x4 Cut-in T for 4x24 FiberGuide
(FGS-MHIS-A/H)
FGS-MHIS-A/H
4x24 45° Down Elbow
FGS-MD4E-H
396 mm
(15.6")
548 mm
(21.6")
128 mm
(5")
128 mm
(5")
533 mm
(21")
381 mm
(15")
152 mm
(6")
12" Cut-in T
Adapter Bracket
6" Cut-in T Adapter Bracket
356 mm
(14")
508 mm
(20")
12" Cut-in T
FGS-MHIS-F/H
designed exclusively for the 4x24 System
(FGS-MHIS-F/H)
Part Drawings
6" Cut-in T
FGS-MHIS-B/H
designed
exclusively for the 4x24 System
(FGS-MHIS-B/H)
305 mm
(12")
06/10
•
401326IN
134.3 mm
(5.3")
647 mm
(25.5")
www.adc.com/in
89
Express Exit™
Part Drawings
406 mm
(16")
Express Exit 2x4
103 mm
(4.1")
196 mm
(7.7")
200 mm
(7.9")
•
06/10
Part Drawings
401326IN
bracket,
Express Exit 2x4
(FGS-MEXP-E-A/B/F shown attached to 4x4 straight section)
51 mm
(2")
Express Exit
254 mm
(10")
95 mm
(3.75")
125 mm
(4.9")
bracket,
Express Exit
147 mm
(5.8")
(FGS-MEXP-A/B/F; fits 4x4, 4x6 and 4x12 systems; shown attached to 4x6 straight section)
low Profile Express Exit
260 mm
(10.25")
51 mm
(2")
132 mm
(5.2")
130 mm
(5.1")
(FGS-MEXP-LP-A/B/F; fits 4x4, 4x6 and 4x12 systems; shown attached to 4x4 straight section)
133 mm
(5.2")
268 mm
(10.6")
47 mm
(1.9")
131 mm
(5.16")
Low-Profile Express Exit™ Designed Exclusively for 2x6 System
(FGS-MEXP-LP-G shown attached to 2x6 straight section)
www.adc.com/in
90
2x2 System
Support Kit Drawings
68 mm (2.7")
straight section (not included)
Existing
ladder rack
support bracket
57 mm
(2.3")
76 mm
(3")
End
6 mm (.25")
84 mm (3.3")
51 mm
(2")
Ladder Rack Support Kit
(FGS-HLR2-C shown alone and attached
to ladder rack)
44 mm
(1.75")
Bay Top Support Short L Bracket Kit
(FGS-BTBS-C, FGS-BTBL-C)
Post
38 mm
(1.5")
support bracket
top
straight section (not included)
support bracket
76 mm
(3")
straight section
(not included)
115 mm
(4.5")
side
230 to 256 mm
(9.1 to 10.1")
77 mm
(3")
Digital
cableway
(not included)
End
side
Under Floor Support Kit
(FGS-HUFB-C shown attached to
.62"x 2" round pipe)
Digital Cableway Support Kit
(FGS-HDCB-C)
threaded rod (not included)
Aluminum
Extrusion
Aluminum
Extrusion
straight section
(not included)
73 mm
(2.9")
connector bar
support bracket
lock Washer
connector bar
cap screw
lock Washer
End-to-End
Assembly Method
cap screw
(FGS-HASK-C)
www.adc.com/in
End
60 mm
(2.4")
side
Aluminum Extrusion
(not included)
(FGS-HTR2 shown attached to
aluminum track support)
91
Part Drawings
06/10
top
136 or 392 mm
(5.3 or 15.5")
End
•
401326IN
top
support
bracket
92 mm
(3.6")
2x6, 4x4, and 4x6 System
1/2-13 OR 5/8-11
threaded rod
(not supplied)
156 mm (6.1")
for 4x4
207 mm
(8.14")
For 6x4
122 mm
(4.8")
section A-A
A
A
25 mm
(1")
closed-End bracket
25.4 mm
(1")
47.2 mm
(1.86")
401326IN
•
06/10
173 mm
(6.8")
136 mm
(5.4")
24.9 mm
(9.8")
44 mm
(1.7")
7.1 mm
(.28")
51 mm
(2")
381 mm
(1.5")
Threaded Rod Clip
48 mm
(1.9")
section A-A
A
open-End bracket
173 mm
(6.8")
9.42 mm
(3.71")
142 mm
(5.57")
threaded rod clip
138 mm
(5.4")
Open-End Bracket
268 mm
(10.5")
52 mm
(2.1")
47 mm
(1.9")
52 mm
(2.1")
7 mm
(.3")
51 mm
(2")
50 mm
(2")
25.4 mm
(1")
4" Fiber
Guide
shown
For
reference
38 mm
(1.5")
94 mm
(3.7")
25 mm
(1")
142 mm
(5.6")
Existing Threaded Rod Bracket Kit
(FGS-HETR-XX shown alone and attached
to threaded rod)
122 mm
(4.8")
10 mm
(.4")
68 mm (2.7")
127 mm
(5")
274 mm (10.8")
7 mm
(.3")
open-End bracket
threaded rod clip
61 mm
(2")
50 mm
(2")
Part Drawings
A
122 mm
(4.8")
closed-End bracket
(FGS-HNTR-XX shown alone and attached
to threaded rod)
Existing 1/2-13 or
5/8-11 threaded rod
Existing
1/2-13 or 5/8-11
threaded rod
156 mm
(6.1")
for 4x4
207 mm
(8.14")
for 6x4
57 mm
(1.5")
85 mm
(3.4")
52 mm
(2.1")
51 mm
(2")
132 mm
(5.2")
180 mm
(7.1")
Modified Existing Threaded Rod Bracket Kit
(FGS-HETR-XX-A shown alone and attached
to threaded rod)
38 mm
(1.5")
22 mm
(.9")
10 mm
(.4")
Ladder Rack Center Support Bracket Kit
(FGS-HNLR-AB)
117 mm
(4.6")
64 mm
(2.5")
7 mm
(.3")
13 mm
(.5")
127 mm
(5")
64 mm
(2.5")
45 mm
(1.75")
16 mm
(.6")
6 mm
(.25")
38 mm
(1.5")
360 mm
(14.2")
55 mm
(2.2")
38.1 mm
OMX Frame Center Support Bracket
Kit
(1.5")
(FGS-HOMX-16MM)
88.9 mm
(3.5")
Under Floor Support Bracket Kit
(FGS-HUFB-A)
50.8 mm
(2")
www.adc.com/in
92
2x6, 4x4, and 4x6 System
406 mm – 483 mm (16" – 19")
Equipment rack
12 mm (4")
38 mm
(1.5")
51 mm
(2")
13 mm
(.5")
3/8-16
122 mm
(4.8")
cableway shown
for reference
171 mm
(6.75")
406 mm – 483 mm (16" – 19")
Digital Cableway Bracket Kit
(FGS-HCBL shown alone and attached
to 4" FiberGuide®)
Support Bracket
(FGS-HLBK shown alone and attached to 4" FiberGuide®)
5/8-11 threaded rod
shown for reference
117 mm
(4.6")
new threaded
Rod Bracket Kit
shown for reference
Pnt0
Pnt0
63.5 mm
(2.5")
39 mm (1.5")
64 mm
(2.5")
lock Washer (2)
80 mm
(3.2")
Unistrut Nut Kit
(FGS-HDGR)
Center Support Bracket
(FGS-HTUB)
threaded rod
185 mm
(7.3")
305 mm
(12")
6" Trough
with cover
221 mm
(8.7")
06/10
•
Quick Knob Assembly
1/2" BOLt HolEs
Top Support C-Bracket
(FGS-HNTS)
For WAll Mount
Ladder Rack Cantilever Support Bracket Kit
(FGS-HDLB-4)
197 mm
(7.75")
6" Trough
254 mm
(1")
Top Support Low-Profile C-Bracket
(FGS-HNTS-LP)
www.adc.com/in
4" O
(rEF
QUICK KNOB ASSE
203 mm
(8")
203 mm
(8")
tHrEADED roD
(rEF)
Part Drawings
401326IN
12-24 x 3/8
Pan Head screw
130 mm
(5.1")
93
4x12 System
12" FiberGuide
51 mm
(2")
32 mm
(1.25")
419 mm
(16.5")
split nut
bracket clip
bottom bracket
32 mm
(1.25")
threaded
rod ref
32 mm
(1.25")
(FGS-HNTR-F-XX shown alone and
401326IN
•
06/10
Part Drawings
286 mm
(11.25")
Mounting
nut
419 mm
(16.5")
Existing Threaded Rod Bracket Kit
(FGS-HETR-F-XX)
216 mm
(8.5")
216 mm
(8.5")
254 mm
(10")
152 mm
(6")
305 mm
(12")
203 mm
(8")
381 mm
(15")
12" Trough
12" Trough
381 mm
(15")
Top Support Threaded Rod C-Bracket Kit
(FGS-HNTS-F-XX shown attached
to 4x12 straight section)
Top Support Low Profile Threaded Rod C-Bracket Kit
(FGS-HNTS-F-XX-LP shown attached
12" FiberGuide
12" FiberGuide
lock
Washer
t-bolt
cantilever
bracket
115 mm
(4.5")
115 mm
(4.5")
10 mm
(.4")
286 mm
(11.25")
t-bolt Assembly
threaded rod
lock
Washer
286 mm
(11.25")
Mounting
nut
t-bolt Assembly
63.5 mm
(2.5")
63.5 mm
(2.5")
thread cap
61 mm
(2.4")
thread
cap rod
threaded
Center Support Threaded Rod Bracket Kit
(FGS-HTUB-F-XX shown attached
38 mm
(1.5")
Ladder Rack Center
Support Bracket
(FGS-HNLR-F)
406 mm
(16")
51 mm
(2")
457 mm
(18")
Trapeze Bracket Kit
(FGS-HNTP-F)
www.adc.com/in
94
4x24 System
Variable Variable
Support Bracket
- Horiz.
ElbowLocater Kit –
Fitting
Support
FGS-MH4E-H-VS
Horizontal Elbow
Variable Support
Bracket -THoriz.
Horizontal
withT Single 12" Exit
FGS-MHRT-H/F-VS
(FGS-MHRT-H/F-VS)
(FGS-MH4E-H-VS)
Variable
Locater Kit –
Variable Support
BracketFitting
- Horiz. Support
Cross
Horizontal Cross
FGS-MHXP-H-VS
Variable
Fitting
Variable Support
Bracket
- Horiz.Support
Cross Locater Kit –
Horizontal Cross with Dual 12" Exits
FGS-MHXP-F/H-VS
(FGS-MHXP-H-VS)
(FGS-MHXP-F/H-VS)
Threaded Rod Ref
Split Nut
Bracket
Clip
13 mm
(.5")
Quick Knob
Existing Threaded Rod Trapeze Bracket
845 mm
(33.25")
737 mm
(29")
51 mm
(2")
51 mm
(2")
Existing5/8”
5/8” Threaded
Threaded Rod
Trapeze
Bracket
Kit
Existing
Rod
Trapeze
Bracket
Kit
FGSHETP-H-5/8
(FGSHETP-H-5/8)
www.adc.com/in
794 mm
(31.25")
737 mm
(29")
New
Rod
Trapeze
Bracket
New5/8”
5/8”Threaded
Threaded Rod
Trapeze
Bracket
Kit Kit
(FGS- HNTP-H-5/8)
FGS-HNTP-H-5/8
95
Part Drawings
06/10
•
401326IN
www.adc.com/in
96
System Description............................................................... 98
Typical Installations............................................................. 100
Patch Cord Densities.......................................................... 101
Plenum Express Exit™ System.............................................. 102
Express Exit™ 4x6 System.................................................... 103
2x2 System......................................................................... 104
4x6 System......................................................................... 106
4x12 System....................................................................... 108
Plenum FibreGuide® System
Accessories......................................................................... 110
www.adc.com /in
97
ADC KRONE's plenum FiberGuide® system is a
fibre cable raceway system that protects optical
fibres, routed beneath raised computer room
floors and above suspended ceilings. These
physical areas, used to transport environment
air, are typically categorized as plenum air spaces
by National Electric Code (NEC) Standards. In
general, materials used in these spaces must be
non-flammable and must not emit appreciable
amounts of smoke or toxic gases when exposed
to heat or flame.
Made from sturdy aluminum, ADC KRONE's
plenum FiberGuide® system protects optical
fibres by physically separating them from copper
communications cable, power cable, ground
cables, heating/ventilating ducts, water pipes and
many other obstructions commonly encountered
in plenum air spaces.
Plenum FiberGuide® Express Exits™ allow jumpers
to be permanently or temporarily routed to the
fibre optic terminal (FOT) equipment or fibre
frames. No cutting is required because knockout
sections can be punched out as necessary.
Dropped
ceiling
Fiber
Distribution
Devices
Fiber
optic
Equipment
raised
Floor
Figure 1
As seen in Figure 1, the plenum FiberGuide®
system can be used above a dropped ceiling as
well as below a raised computer floor.
401326IN
Figure 2 details a layout below a computer floor.
This illustration shows a plenum FiberGuide®
system featuring new Express Exits™.
•
All plenum components, including
mounting hardware for mounting
the FiberGuide® to the raised floor
struts, are available in the plenum
FiberGuide® product line.
06/10
System Description
Figure 2
www.adc.com/in
98
System Description
Straight sections: U-shaped troughs that provide a protective pathway for optical fibres. Straight
sections are usually installed horizontally but may also be installed vertically when a system is mounted
on multiple levels. Straight sections are six feet in length, and covers are also available. The covers snap
into place but can be easily removed for fibre installation.
Fittings: Elbows, tees, crosses, trumpet flares and conversions. The fittings are used for changing
direction, converting from one size system to another, adding branch segments and routing the fibres
in and out of the system. Like the straight sections, snap-on covers are also available for the fittings.
Junction kits: Used for aligning and connecting straight sections and fittings. Two components are
joined by inserting them into a junction and pushing them together.
Support kits: Used to support the FiberGuide® system. The short, long, span and diagonal bracket kits
are used for supporting straight sections from round or square tubing.
Flexible tubing: Used in plenum FiberGuide® systems when the exact layout of the equipment drop
locations is unknown or when frequent equipment relocations are expected. The flexible tubing is two
inches in diameter and attaches to the end of a straight section with an adapter. When the equipment
configuration is known, the flexible tubing is routed to the exact drop location. Other flexible tubing
components include splicing couplers, finishing couplers, mounting straps and additional lengths of tubing.
•
2x2, 4x6, and 4x12 Junction Kits
06/10
4x6 Horizontal Straight Section with Express Exit™ Cutouts
2x2 Horizontal Straight Section
www.adc.com/in
99
Both patch cords and IFC cables may be installed in the plenum FiberGuide® system. The required twoinch bend radius for patch cords is maintained at all points within the system. IFC cables require the use
of tie-down brackets to maintain the required cable bend radius specified by the cable manufacturer at
the various fittings.
401326IN
Express Exits™: The plenum FiberGuide® Express Exit™ system allows jumpers to be routed in and out
of the system with ease. Express Exits™ are secured to the sidewall of a FiberGuide® straight section
where needed. No cutting is required because knockout sections allow for quick and easy deployment.
Typical Installations
In addition to providing physical separation and protection, the plenum FiberGuide® system also provides
smooth edges and 2-inch minimum bend radius protection.
401326IN
Optional Covers
for Straight Sections
and Fittings
4x6 90°
Horizontal
Elbow
2x2 90°
Down Elbow
4x6 45°
Down
Elbow
4x6 45°
Up Elbow
4x6
Horizontal T
2x2 to 4x6
Conversion
4x6
Straight
Section
2x2
Straight
Section
2x2 3-Sided
Trumpet Flare
Overhead Installation
Optional Covers
for Straight Sections
and Fittings
4x6 90°
Horizontal
Elbow
•
06/10
The Plenum FiberGuide® system can be assembled and installed using common hand tools. Push
together assembly simplifies installation in confined areas and also permits system expansion when
additional capacity is required. A variety of fittings allow adjustments in routing to avoid obstructions.
The various sizes provide flexibility when considering the capacity required versus the space available.
4x6 45°
Down
Elbow
4x6 45°
Up Elbow
4x6
Horizontal T
2x2 to 4x6
Conversion
2x2
Straight
Section
2x2 90°
Up Elbow
2x2
4-Sided
Trumpet Flare
4x6
Straight
Section
Under Floor Installation
www.adc.com/in
100
Recommended Patch Cord Densities
Recommended capacity takes into consideration random jumper placement into the FiberGuide®
system. Trough capacity refers to the maximum number of fibre jumpers in a given cross-section
of a FiberGuide® installation.
1.7 mm
2.0 mm
3.0 mm
120/142
90/102
40/44
Trough Pileup
2-Inch
3-Inch
4-Inch
1.7 mm
2880/3408
4320/5112
5760/6862
2.0 mm
2160/2448
3240/3672
4320/4896
3.0 mm
960/1056
1440/1584
1920/2112
1.7 mm
1440/1704
– /2556
– /3408
2.0 mm
1080/1224
1620/1836
2160/2448
3.0 mm
480/528
720/792
960/1056
1.7 mm
480/568
–
–
2.0 mm
360/408
–
–
3.0 mm
160/176
–
–
4x12 System
4x6 System
2x2 System
Recommended density determined using GR-449-CORE Bellcore Formula
Maximum density determined using Lab Manual Set-ups
Pile-up beyond 2 inches is not recommended
06/10
•
401326IN
www.adc.com/in
101
Plenum Express Exit™ System
ADC KRONE introduces its new plenum FiberGuide® Express Exit™ system, which accommodates a wide
range of raceway environments and applications, ensuring greater speed of deployment. Knockout areas
are placed every 24" on straight sections. By simply punching out one of these areas, the Express Exit™
can be secured directly to the sidewall — allowing drops to be inserted quickly and easily. No cutting is
required.
Description
Product Number
6-inch plenum Express Exit™ straight section with Express Exit™
PFGF-PSHS-KT
cutouts placed every 24"
Plenum Express Exit™ 2" square; For rigid drops — 90° up elbow and trumpet flare
are NOT included. See page 103 for more information on these accessories.
PFGF-PSEE-B/C
12-inch plenum Express Exit™ straight section
PFGF-PSHS-KT-F
Plenum blank cover
PFGF-PSEE-BLK
6" Plenum Express Exit™ Straight Section
(PFGF-PSHS-KT)
Plenum Express Exit™ 2" Square
(PFGF-PSEE-B/C)
•
401326IN
06/10
Positioning a drop with the plenum Express Exit™ family greatly simplifies installation, protecting the
integrity of fibres already present in the raceway, and increases the flexibility of the entire plenum
raceway system. All plenum Express Exits™ guarantee two-inch minimum bend radius protection.
Plenum Blank Cover
(PFGF-PSEE-BLK)
www.adc.com/in
102
Express Exit™ 4x6 System – 4" H x 6" W
260 mm
(10.25")
165 mm
(6.5")
610 mm
(24")
32 mm
(1.25")
152 mm
(6")
6-Inch Plenum Express Exit™ Straight Section
(PFGF-PSHS-KT)
51 mm
(2")
4 mm
(1.6")
150 mm
(6.8")
89 mm
(3.5")
305 mm
(12")
Plenum Express Exit™ — 2" Square
(PFGF-PSEE-B/C)
305 mm
(12")
89 mm
(3.5")
06/10
•
401326IN
6 mm
(2.3")
Plenum Blank Cover
(PFGF-PSEE-BLK)
www.adc.com/in
103
2x2 System – 2" H x 2" W
The 2x2 plenum FiberGuide® system interfaces with ADC KRONE's standard 2x2 FiberGuide® system and
requires no special conversion piece.
Number of
Junctions
Description
Product Number
Fitting
Snap-on Cover
–
PFGF-PSHS-C
PFGC-PSHS-C
Horizontal T
3
PFGF-PHRT-C
PFGC-PHRT-C
Horizontal cross
4
PFGF-PHXP-C
PFGC-PHXP-C
2
PFGF-PH9E-C
PFGC-PH9E-C
2
PFGF-PH4E-C
PFGC-PH4E-C
90° up elbow
2
PFGF-PUPE-C
PFGC-PUPE-C
90° down elbow
2
PFGF-PDNE-C
PFGC-PDNE-C
45° up elbow
2
PFGF-PU4E-C
PFGC-PU4E-C
45° down elbow
2
PFGF-PD4E-C
PFGC-PD4E-C
Trumpet flare; 3 sided
–
PFGF-PTRM-C
–
–
PFGF-PFPT-C
–
401326IN
•
06/10
Straight section; 6' long
2x2 fittings
2x2 trumpet flares
2x2 conversions
2x2 plenum to 4x6 conversion
(1) 2x2 (1) 4x6
PFGF-PDSA-C/B
PFGC-PDSA-C/B
2x2 plenum to 4x12 conversion
(1) 2x2 (1) 4x12
PFGF-PDSA-C/F
PFGC-PDSA-C/F
2x2 junction
–
PFGF-PJWR-C
–
2x2 end cap; includes 2x2 junction
–
PFGF-PMEC-C
–
226 mm
(8.9")
51 mm
(2")
225 mm
(8.9")
51 mm
51 mm 183 mm
225 mm
51 mm
(2")
51 mm
(2")
(8.9")
(72")
(2")
51 mm
(2")
183 mm51 mm
(2")
183 mm
51 mm
51 mm
(72") (2")
51 mm
(72")
138
mm
(2")
(2")
51
mm
(2")
51 mm (2")
(5.4")
51 mm
(2")
(2")
138 mm
(5.4")
Straight Section
Horizontal
T
(PFGF-PSHS-C)
Cover: PFGC-PSHS-C
140 mm
(5.5")
140 mm
(5.5")
140 mm
(5.5")
140 mm
51 mm
140 mm
(5.5")
(2")
(5.5")
92 mm
51 mm
(3.6")
51 mm
(2")
(2")
51 mm
(2")
139 mm
(5.5")
139 mm
(5.5")
51 mm
(2")
226 mm
(8.9")
51 mm
225 mm
(2")
(8.9")
51 mm 226 mm
51 mm
(8.9")
(2")
51 mm
(2")
(2")
226 mm 51 mm
(2")
(8.9")
138 mm
(5.4")
51 mm
(2")
51 mm
(2")
51 mm
(2")
51 mm
(2")
140
140mm
mm
51 mm
51 mm (5.5")
(5.5")
(2")
(5.5")136 mm
(2")
140 mm
140
mm
(5.4")
(5.5")
(5.5")
51 mm
92 mm
(2")(3.6")
51 mm 136
mm
(2")
(5.4") 140 mm
51 mm
136 mm
(2")
(5.4")
97 mm
(3.8")
mm
5151
mm
140 mm (2")
(2")
(5.5")
51 mm
(2")
51 mm
97 mm
51 mm
51 mm
97 mm
(2") 92 mm
(2")(3.8")
51(2")
mm
(3.8")
(3.6")
51
mm
(2")
139 mm
51 mm
139 mm
51 mm
(5.5")
51 mm
51 mm 92 mm(2")
(2")
(5.5")
51 mm
(2")
(2")
(3.6")
(2")
137/ mm
146 mm
(2")
www.adc.com
in
51 mm
51 mm 51 mm
(5.75")
51 mm (5.4")
(2")
(2")
(2")
(2")
137 mm
146 mm
137 mm 51 mm
146 mm
51 mm
(5.4")
(5.75")
(5.4") (2")
(5.75")
(2")
139 mm
(5.5")
139 mm
(5.5")
226 mm
(8.9")
Horizontal Cross
(PFGF-PHXP-C)
Cover: PFGC-PHXP-C
(PFGF-PHRT-C)
Cover: PFGC-PHRT-C
92 mm
140(3.6")
mm
(5.5")
226 mm
(8.9")
92 mm
(3.6")
104
51 mm
225 mm
(2")
(8.9")
226 mm
(8.9")
226 mm
(8.9")
226 mm
(8.9")
225 mm
225 mm
(8.9")
(8.9")
51 mm
51 mm
51 mm
(2")
183
mm
(2") 51 mm
183 mm
(2")
51 mm
183 mm
51 mm
51
mm
226mm
mm
226 mm
51 mm
51 mm
(72")
226
(2")
(72") (2")
226226
mmmm
(2")
(72")
226 mm 51 mm
(2")
51
mm
51
mm
(8.9")
(8.9")
(2")
(2")
(8.9")
(8.9")
(2")
(8.9")
(8.9")
51
mm
(2")
(2")
5151
mm
51 mm
mm
225
mm
51 mm
225
mm
(2")
51(2")
mm
138 mm
(2")
225
mm
(2")
138
mm
(8.9")
(2")
(8.9")138 mm
(2")
(5.4")
51 mm
(8.9")
(5.4")
(5.4") 51 mm
51 mm51 mm
(2")
183 mm
(2")
183 mm
51 mm
51 mm
(2") (2")
183 mm
51 mm
51 mm
(72")
226mm
mm
(72")51 mm
226 mm
(2")
51 mm
226
51
mm
(2")
(72")
226 mm
mm
(2")
(2")
226 mm
51 mm
(8.9")
(8.9")
(2")226
(2")
51 mm
(8.9")
(2")
51 mm
(8.9")
(8.9")
(2") (8.9")
51 mm
(2")
(2")
138 mm
51 mm 138 mm
225 mm
(2")
51 mm
51 mm
225 mm
225 mm
138 mm
(5.4")
(2")
(5.4")
(8.9")
(2")
(8.9")(5.4")
140
(8.9")
140 mm
51 mm
51 mm
140 140
mm(2")
140 mm
140 mm
mm
51 mm
mm
51 mm
51 mm 226
51 mm
51 mm
mm
(5.5")
(2")
51 mm mm 51 mm
183 mm(5.5")
(5.5")
(5.5")
(5.5")
(2")
(2") (2")
(2") 51 mm
18351
mm
183 mm(5.5")
51 mm
51 mm 92 (2")
mm
92
mm
(2")
92
mm
(8.9")
(2")
(2") (3.6")
(72")
226 226
mm mm
(2")
51 mm
51 mm
51 mm226 mm
51 mm
(72")
(72")
(2")
226
mm
(2")
(2")
(3.6")
51
mm
(3.6")
51
mm
51
mm
(8.9")
51
mm
226
mm
51 mm
(8.9")
225 (2")
mm
(2")
(2")
140
(2") mm
51 mm 140 mm
(8.9")
140
mm(8.9")
(2")
51 mm
(2")
(2")
5151
mm
51 mm
(2") (2")
51(8.9")
mm
mm
(8.9")
225
mm 51 mm
(5.5")
(2")
(5.5")
mm
51
(2")
51 mm(5.5")
(2")
136 mm 138
(2")
51 mm
(2")
(2")mm
51 mm
(2")
138 mm
(8.9")
140 mm
136 mm225138
136
mmmm
mm
140 51
mmmm
mm
140mm
mm
51 mm
(5.4")
140 mm
(2")51 mm
140
mm (2")
(2") (5.4") (5.4") 140
51 mm 140
183140
mmmm
51 mm
(2")
(5.4")
(5.4")
(5.4")
(8.9")
140(2")
mm
51 mm (5.5")
51
mm (5.5")
51 mm
(5.5")
51
mm
(5.5")
(5.5")
(2")
(5.5")
(5.5")
(2")
(72")
(2")
226mm
mm
(2")
183 mm
92 mm
51 mm 51 mm 51 mm 51
(5.5")
92
mm
(5.5")
(2")
(2")
(2")
51
mm
(2")
(8.9")
(72")92 mm
226 mm
(2")
183 mm
51 mm
(2") (2")
(3.6")
51
mm
(2")
51
mm
51
mm
(3.6")
51
mm
(2") 51 mm
51 mm
(3.6")(2")
(8.9")
22690°
mm Up Elbow
(2")
140(2")
mm
mm
51140
mm
(2") (72") (2")
51 mm
45°
Horizontal
Elbow
90° Horizontal(2")
Elbow
138
mm
51 mm
51 mm
140 mm
(2")
(5.5")(8.9")
51 mm
(5.5")
(2")
(2")
51
mm
(5.4")
51
mm
(2")
138
mm
51
mm
(2")
136
mm
(5.5")
(PFGF-PUPE-C)
(PFGF-PH4E-C)
(PFGF-PH9E-C)
140 mm
51 mm 136 mm
(2")
136 mm 138 mm(5.4")140 mm(5.4")
(2")(2")
(2")
14051mm
(5.4")
mm
(5.5")51 mm
140 mm (2")
(5.5")
140
mm
Cover:
PFGC-PUPE-C
Cover:
PFGC-PH4E-C
Cover:
PFGC-PH9E-C
51
mm
97
mm
51
mm
(5.4")
140
mm
140 mm
97
mm
140 mm
97 mm
140
mm
(5.4")
(5.5")
mm
5151
mm
(2")51 mm
(5.5")
(5.5")
(2")
(2")
(3.8")
(2")
51 mm
51 mm
(5.5")
(5.5")
(5.5")
(3.8")
(2")
139 mm
92 mm (3.8")
(5.5")
(2")
139
mm
(2")
139 mm
92 mm
92 mm
(2")
(2")
51
mm
(5.5")
(3.6")
51
mm
139 mm
51 mm
51 mm
(5.5")51
(5.5")
139
139mm
mm
(3.6")
51mm
mm
(3.6")
92 mm
(2")
140
mm 92 mm
92 mm
(2")
(5.5")
(2") 51
(2")
51 mm
(5.5")
140
mmmm
51
mm
(5.5")
140
mm
51 mm
(2")
(2")
(3.6")
mm
51 mm
(3.6")(5.5") 51 (3.6")
(2")
140 mm
140 mm
51 mm
51 mm (2")
(2")
(2")136 mm (5.5")
(5.5")
140
mm
51
mm
(2")
51 mm
(2")
51
mm
51 mm
136140
mm(2")
51136
mmmm51 mm
51
mm
(5.5")
51
mm
140
mm
(5.5")
140
mm
(2")
140
mm
mm
97
mm
51
mm
51
mm
97 mm
51 mm (2")
(5.4")
51 mm
51 mm
92 mm
(2")
(5.4") (2")(2")
(2")
(5.4")
97 mm
(2")
51 mm (5.5")(2")51 mm (5.5")
(2")
(5.5")
(5.5")
(5.5") (2")
140
mm
(3.8")
(2")
mmmm
(3.8")
(2")
137 mm146
146 mm
(2")mm
(2")
(3.6")
51 mm 140139
137 mm 92 mm (3.8")
146
mm
139
137 mm 51 mm
mm
(2")
51 mm
51 mm
(5.5")
51 mm (5.5")
139 mm
51 mm (2") (5.75")
(5.5")
51140
mmmm (5.4") (5.75") 51 mm(5.75")
139
(5.4") (3.6")
51mm
mm
(5.5")
(5.4")
139(2")
mm
92 mm
(2")
(2")
51 mm 92 mm (2")
(2")mm
92 mm
(5.5")(2")
139
(5.5")
(2")
140 mm 92 mm
51 mm
(2")
(3.6")(5.5")
51 mm 136 mm
51
mm
51(5.5")
mm
(2")
51(3.6")
mm
(2")
(5.5")
51 mm
140
mm
(5.5") (3.6")
(2") (3.6")
140
mm
(2")
(2")
(2")
(2")
51
mm
(5.4") 51 mm
136
mm
(2")
(5.5")
140
mm
51
mm
(5.5")
51
mm
51 mm
51 mm
(2") 136 mm 51 mm
51 mm
(5.4") (2")
51 mm
mm (2")
51 mm
(5.5")
140
97mm
mm
(2")
(2") (2")
51
5197
mm
(2")
137 mm
146 mm
mm
97 mm(5.4") (2")
137 mm 51 mm
146 mm(3.8")
(2")
(2") 51 mm
(5.5")
137
mm
146
mm
(2")
(2")
139 mm
(5.4")(5.75")
(5.75")
(3.8")
(3.8")
51 mm(5.4")
139 mm
139 mm
(2") (5.4")
(2")
(5.75")
51 mm
(5.5") (2")
139 mm
152 mm
51 mm187 mm 51 mm 187
117 mm
152 mm
(5.5")
(5.5")
152
mm
mm
139
mm
139 117
mm mm
92 mm
117
mm
187 mm
(5.5")
92 mm
51 mm(7.36")
92(6")
mm(2")
(6")
(2")
(2")
(4.6")
(6")
(5.5")
51
mm
(5.5")
51
mm
(3.6")
(4.6")
(4.6")
(7.36")
(7.36") 51 mm
(3.6")
(2")
(3.6")
45° Down Elbow
45°
Up Elbow
90° Down Elbow
97
mm
(2")
(2")
51 mm
(2")
51 mm
51 mm
(3.8")
97 mm
51 mm
51 mm
51 mm
51139
mm
(PFGF-PU4E-C)
(PFGF-PDNE-C)
mm
(2")51 mm
(2") (PFGF-PD4E-C)
(2")
102 mm
(3.8")
137
mm
(2")
mm
51 mm146
97
mm
mm
51(2")
mm
102
mm
(2") 139 mm
(2")
(5.5")
139
mm
51
mm
51
mm
187
mm
137
mm
146
mm
51
mm
137
mm
146
mm
Cover:102(4")
PFGC-PD4E-C
Cover:
PFGC-PU4E-C
Cover: PFGC-PDNE-C
187 mm
187(2")
mm 92 mm
187 51
mmmm 92 mm
(4")
187
mm
51
mm
(5.4")
187
mm
91
mm
(3.8")
(2")
(4")mm(2") (5.75")
51
92 mm 139 mm
(5.5")
91
mm
(2")
92 mm
(5.5")
152
mm
51
mm
91
mm
(2")
139
mm
(7.4")
(5.4")
(5.75")
152
mm
(2")
(5.4")
(5.75")
117
mm
(7.4")187(3.6")
mm
(7.4")
117 mm (7.4") (2")
187 mm (3.6")
92 mm
(7.4")
(7.4")
mm
(2") 51152
(3.6") (5.5")(2") (3.6") (3.6")
(3.6")
(6")
(2")
187 mm 51 mm
51
mm
164
mm
139117
mmmm (3.6") (5.5")
(6")
mm
(4.6")
(7.36")
164
mm
(4.6")
164 mm
(7.36")
51 mm
51 mm
(3.6")
(6")
92
mm
51 mm
(4.6")
(7.36") (2") (2")
(6.5")
51 mm
(5.5")
51 mm
(2")
(6.5")
(2") (6.5")
(2")
(3.6")
(2")
51 mm
(2")
(2")
51 mm
137 mm
146 mm
(2")
51 mm 137 mm
102 mm
(2")
51 mm51 mm
102 mm 51 mm 146 mm
(5.4")
51 mm (5.75")
187 mm
102 mm
187
51 mm
mm
187 mm
51 mm (4")
(2")
(4")
187
(2")mm(2") 92 mm
91 mm
(2")
187
mm
92 mm
(5.4")
(5.75")
91
mm
(2")
137
mm
146
mm
187
mm
(7.4")
(4")
(7.4")
(2")
92 mm
(7.4")(2")
91 mm
51 mm
(7.4")
(3.6")(7.4")
152164
mmmm
(3.6")
(3.6")
(5.4") (3.6")(7.4")
(5.75")
117
mm
187
mm
51
mm
152
mm
164
mm
152 mm
(3.6")
51
mm
(3.6")
(2") mm
117
117 mm
187
mm
(6")
31.5164
mmmm
51 mm
(4.6")187 mm
31.5
31.5 mm
(7.36")
(6.5")
(2")
(6")
(6.5")
(6")
(2")
(4.6")
(4.6")
(7.36")
(7.36")
(1.2")
(6.5")
(2")
(1.2")
(1.2")
51 mm
(2")
51 mm
(2")
102 mm
53.6
51
mmmm 102 mm
mm
53.6
mmmm
53.6
102 mm
187305
mm
305 mm mm 305 mm
53 mm51
51 152
mm
mmmm 187 mm
53
mm 187 mm
(4")
53 mm
(2.1")
187 mm
187 mm11792
mm
91 mm
(2")
(12")
(2.1")
187 mm
(2.1")
187 mm
(4")
(4")
(12")
(7.4")
(6")
92 mm (12")(4.6")
152
mm
(2.1")
91
mm
(2")
91
mm
(2")
(7.4")
mm (3.6")
(2.1")117 (7.36")
187 mm
(7.4")
(3.6") (7.4") (2.1")
(7.4")
31.5
mm
(3.6")
164
mm
(6")
31.5 mm
(3.6")(7.4")
(3.6")117 mm
51
mm
152
mm
(4.6")
(7.36")
56
mm
187
mm
164 mm
164
mm
51
mm
31.5
mm
51
mm
56
mm
56 mm
102 mm
(1.2")
63.5
mm
(6.5")
mm
(1.2")
102 mm
(2")
(6")
63.5 mm
63.5 mm
51 mm 102
(4.6")
(2.2")
(7.36")
(6.5")
(6.5")
(2")
(1.2")
51 mm
(2")
51 mm
(2.2")
(4")(2.2")
(2.5")
(4") (2.5")
(4") (2")
102
mm
56.4 mm
(2.5")
51
mm
56.4
mm
56.4
mm
(2")
(2")
187 mm
187
mm
53.6
mm
(4")
102 mm
53.6
mm (2.2")
92 mm
305 mm
91 mm
(2")
51 mm (2.2")
305
mm
(2.2")
(7.4")
53 mm Flare
178
mm
187
mm
51 mm
53
mm
(7.4")
305
178
4-Sided
Trumpet
Flare
18753.6
mmmm
(2.1")
51
mm
178
mm 92 mm
51 mmTrumpet
(4")
(3.6")3-Sided
2x2
to 102
4x6mm
Conversion
(12")
(3.6")
91(2.1")
mm (2.1")
(2")
53
mm
(12")
51(2.1")
mm
(7")
(7.4")
164 mm
(2")
187 (12")
mm
51 mm
(2.1")
(7")
(7.4")
(2")
(7")
(2")
187
mm
(4")
(3.6")
(3.6")
(2.1") (PFGF-PFPT-C)
(PFGF-PTRM-C)
92 mm
91 mm
(2")(6.5")
(PFGF-PDSA-C/B)
164
mm
(7.4")
(2")
mm
56 mm
(7.4")
56 mm
31.551mm
(3.6")
102 mm
63.5
mm
63.5
mm (3.6") 102 mm
56 mm
31.5
mm
(6.5")
31.5
mm
(2") mm
164
51 mm 102
51
mm
(2.2")
Cover:
PFGC-PDSA-C/B
mm
51 mm
(2.2")mm
63.5
(1.2")
(4")
(4")
(2.5")
51 mm
(2.5")
(2.2")
(1.2")
(1.2")
56.4 mm
(6.5")
(2")
(2")
56.4
mm
(4")
(2")
(2.5")
56.4
mm
(2")
(2.2")
(2.2")
51 mm
(2.2")53.6 mm
178 mm
51 mm
305 178
mm mm
53.6 mm
53 mm 53.6 mm
mm
305178
mmmm
30551
mm
(2.1")
(7")
(2")
53(7")
mm
53(2")
mm
(12")
(2.1")
(2.1")mm
(7")
(2.1") 31.5
(2")
(12")
(12")
(2.1")
(2.1")
(1.2")
31.5 mm
56 mm
102 mm
56
56
mm
63.5
mm
(1.2")
31.5 mm
10263.5
mmmm
102 mm
51 mm
(2.2")
63.5 mm
(4")
51 mm
51 mm
(2.2")
(2.2")
(2.5")
(1.2")
53.6 mm
56.4 mm
(2.5")
305 mm (4") (2") 53 mm(4")
(2.5")
56.4 mm
56.4 mm
(2")
(2")
(2.1")
(2.2")
53.6 mm
(12")
305mm
mm
(2.2")
(2.2")
178
51 (2.1")
mm
53 mm
(2.1")
178
mm
178
mm
51
mm
51 mm
53.6 mm
(12")
305
mm
(7")
(2")
(2.1")
53 mm 56 mm
(7")
(7")
(2")
(2")
(2.1")
102 mm
(12") 63.5 mm (2.1")
51 mm
(2.2")
56 mm
(4")
102
mm
(2.5")
63.5 mm
(2")
51 mm
(2.2")
56 mm56.4 mm
(4") mm
102 mm
(2.5")(2.2")
63.5
56.4 mm
(2")
51 mm
(2.2")
178 mm
51 mm
(4")
(2.5")
(2.2")
56.4 mm
(2")
(7")
(2")
178 mm
51 mm
(2.2")
(7")
178(2")
mm
51 mm
(7")
(2")
92 mm
(3.6")
2x2 to 4x12 Conversion
(PFGF-PDSA-C/F)
Cover: PFGC-PDSA-C/F
Junction
(PFGF-PJWR-C)
www.adc.com/in
End Cap
(PFGF-PMEC-C)
105
06/10
•
401326IN
Number of
Junctions
Description
Product Number
Fitting
Snap-on Cover
–
PFGF-PSHS-B
PFGC-PSHS-B
Horizontal T
3
PFGF-PHRT-B
PFGC-PHRT-B
Horizontal cross
4
PFGF-PHXP-B
PFGC-PHXP-B
2
PFGF-PH9E-B
PFGC-PH9E-B
2
PFGF-PH4E-B
PFGC-PH4E-B
90° up elbow
2
PFGF-PUPE-B
PFGC-PUPE-B
90° down elbow
2
PFGF-PDNE-B
PFGC-PDNE-B
45° up elbow
2
PFGF-PU4E-B
PFGC-PU4E-B
45° down elbow
2
PFGF-PD4E-B
PFGC-PD4E-B
401326IN
4x6 trumpet flares
–
PFGF-PTRM-B
–
–
PFGF-PFPT-B
–
4x6 plenum to 4x6 standard conversion
One 4x6 plenum junction kit required;
4x6 standard junction is not required
1*
PFGF-PPSC-B
–
4x6 plenum to 4x12 plenum conversion
(1) 2x2 (1) 4x12
4x6 conversions
PFGF-PDSA-B/F
PFGC-PDSA-B/F
4x6 junction
–
PFGF-PJWR-B
–
4x6 end cap; includes 4x6 junction
–
PFGF-PMEC-B
–
Note: For more information on Express Exits™, see pages 58-59, 90.
327 mm
(12.9")
327 mm
327 mm
(12.9")(12.9")
102 mm
(4")
102 mm
(4")
•
06/10
4x6 fittings
152 mm
(6")
183 mm
(72")
152 mm
152 mm
(6") (6")
6-incH strAiGHt sEction
3064-A
102 mm
102 mm 152 mm
(4") (4")
(6")
183 mm
183 mm
(72") (72")
Straight Section
6-incH strAiGHt
6-incH strAiGHt
sEction sEction
(PFGF-PSHS-B)
3064-A 3064-A
Cover : PFGC-PSHS-B
251 mm
251 mm
(9.5") (9.5")
251 mm
251 mm
(9.5") (9.5")
102 mm
(4")
∞HORIZONTAl
ElboW ElboW
6-incH 906-incH
90 ∞HORIZONTAl
3069-A 3069-A
240 mm
240 mm
(9.4") (9.4")
6-INCH HORIZONTAl tEE
3071-A
152 mm
(6")
152 mm
152 mm
(6") (6")
Horizontal Cross
(PFGF-PHXP-B)
Cover : PFGC-PHXP-B
6-INCH HORIZONTAl
6-INCH HORIZONTAl
cross
cross
3072-A 3072-A
102 mm
(4")
152 mm
152 mm
(6") (6")
102 mm
102 mm
(4") (4")
190 mm
152 mm
(7.5")
(6")
102 mm
102 mm
190
mm
190
mm
(4") (4")
190 mm
152 mm
152 mm
(7.5") (7.5")(7.5")
(6") (6")
102 mm
(4")
208 mm
208 mm
6-INCH 45 ∞ HORIZONTAl
ElboW
3070-A(8.2") (8.2")
6-INCH 456-INCH
∞ HORIZONTAl
45 ∞ HORIZONTAl
ElboW ElboW
w w w . a d c . c o m3070-A
/ i n3070-A
147 mm
152 mm
152 mm
(6") (6")
6-INCH HORIZONTAl cross
3072-A
152 mm
(6")
194 mm
102 mm
102 mm (7.6")
(4") (4")
194 mm
194 mm
(7.6") (7.6")
208 mm
(8.2")
6-incH 90 ∞HORIZONTAl ElboW
3069-A
240 mm
(9.4")
327 mm
327 mm
(12.9")(12.9")
327 mm
327 mm
(12.9")(12.9")
102 mm
(4")
102 mm
102 mm
102 mm
(4") (4") 102
152mm
mm
(4")
(6") (4")
Horizontal T
6-INCH
HORIZONTAl
6-INCH HORIZONTAl
tEE
tEE
(PFGF-PHRT-B)
3071-A 3071-A
Cover : PFGC-PHRT-B
251 mm
(9.5")
251 mm
(9.5")
152 mm
152 mm
(6") (6")
327 mm
(12.9")
327 mm
(12.9")
190 mm
190 mm
(7.5")
6-incH 90 ∞ uP ElboW
3065-A (7.5")
∞ uP ElboW
6-incH 906-incH
90 ∞ uP ElboW
3065-A 3065-A
106
102
mm
(4")
102 mm (4")
102
mm
102 mm
(4")
(4")
(4") mm
102
mm
(4")
102 mm
102
mm102
102
(4")
(4")
(4")
(4")
102mm
mm(4")
327 mm
(4")
(4")
327 mm
(4")327 mm
102102
mmmm
102
mm
(4")
(4")
(4")
(4")
152
mm
(12.9")
102
mm152
(4")
152
mm
152
mm
102
mm
152
mm
152
mm
(4")(12.9")
(12.9")
240
mm
102
mm
102
mm
mm
152 mm
240
mm
102
mm
102
mm
152
mm
152
mm
(4")
(4")
240
mm
152
mm
183
mm
240
mm
152
(6")
183
mm
(4")
152mm
mm
152
mm
183
mm
(6")
(4")
152
152
mm
183
mm
(6")
(6")mm
(4")
152
mm
(4")
152
mm
(9.4")
(6")
240 mm
(4")
152
mm(6")
(4")
(9.4")
(6") (6")
(6")
240
mm
152
mm
(9.4")
(6")
240
mm
(9.4")
152
mm
(72")
(6")
183
mm
152 mm
(6")
(6")
183
(72")
(6")
183mm
mm(72")
(6")
(6")
(6")
(9.4")
(6")
(6")
152
(9.4")
152152
(9.4")
(6")
152
mmmm
(72")
152
mm
240
102
mm
(6")
152
mmmm
(72")
152
mm
240
mm
(72")
240
mmmm 102 mm
mm
183
mm
152152
mm
183
mm
(6")(6")
183
mm
102 mm
(4")
(6")(6")(6")
(6")
(9.4")
(9.4")
(6")
(9.4")
(72")
(4")
(6")(6")
(72")
(4")
6-incH strAiGHt
sEction
(72")
6-incH
strAiGHt
sEction
6-incH
strAiGHt
sEction
6-incH
strAiGHt
sEction
3064-A
3064-A
3064-A
3064-A
6-incH
strAiGHt sEction
6-incH
strAiGHt
sEction
6-incH
strAiGHt
sEction
152 mm
3064-A
183
mm
3064-A
3064-A
(6") 6-incH
6-incHstrAiGHt
strAiGHt
sEction
sEction
(72")
152 mm
(6")
6-incH strAiGHt
sEction
3064-A
3064-A
3064-A
6-incH strAiGHt sEction
3064-A
6-INCH
HORIZONTAl
6-INCH
HORIZONTAl
tEE tEE tEE
6-INCH
HORIZONTAl
3071-A
3071-A
3071-A
3071-A
6-INCH
HORIZONTAl
tEEtEE
240
mm
6-INCH
HORIZONTAl
3071-A
3071-A
3071-A
(9.4")
6-INCH
HORIZONTAl
6-INCH
HORIZONTAl
tEE tEE
6-INCH HORIZONTAl
3071-A
3071-A tEE
3071-A
152 mm
152 152
mm mm
152 mm
(6")
(6")mm
152
(6")
152mm
mm152
(6")
(6")
(6")
(6")
152
mm
152 152
mm mm
(6") (6")(6")
6-INCH
HORIZONTAl
cross
6-INCH
HORIZONTAl
6-INCH6-INCH
HORIZONTAl
cross
HORIZONTAl
crosscross
3072-A
3072-A
3072-A 3072-A
152HORIZONTAl
mm
6-INCH
cross
3072-A
6-INCH
HORIZONTAl
cross
152 mm
(6")
3072-A
(6") 3072-A
6-INCH HORIZONTAl
cross
6-INCH HORIZONTAl
cross
6-INCH3072-A
HORIZONTAl
cross
3072-A
3072-A
3071-A
3072-A
251 251
mm mm
mm
251251
mm 251
mm
(9.5")
(9.5")
152 mm
(9.5")
251
(9.5")
mm
251mm
mm
152
mm
152152
mm152
(9.5")
mm
(6") (6")
251
mm
102 mm 102 mm
(9.5")
(9.5")
251
152
102 mm
(6")
152mm
mm (6")(6")
251(9.5")
mmmm
102
(4")102 mm
152
mm
(4")mm
(9.5")
(6")
102
102102
mm mm
(4")
251 mm
(6")
102mm
mm(4")
152
mm
(9.5")
(4")
102
mm
152
mm
(6")
102
mm
102
mm
(9.5")
(4")
102
mm
(9.5")
(4")
(4")
(6")
152194
mm
102
mm
mm
(4")
(4")
(6")
102
102 mm
102 mm
(4")
(4")
194
mm
102mm
mm
194
mm
(4")
194
mm
(6")
mm
102 mm
(4")
102
mm
(7.6") 194 mm
102
mm
102102
mm
(4")
(4")
102
mm 190 mm190 mm(4")
(7.6")
(4")
152 mm(4")
102
(7.6")
194
(7.6")
(4")
194mm
mm
190 190
mm
(7.6")
102
mmmm
152
mm
102
(4")
(7.5")
190mm
mm
102mm
mm(4")
102(4")
mm
(4")
194 mm
mm
(6")152 152
152mm
mm
(4")
(7.5")
102 mm
(7.6")
(7.5")
(7.6")
190
mm
(7.5")
(4")
194
mm
190
mm
(4")
(4")
(7.5")
(4")
(6")
(7.6")
152
102
mm
(6")
194194
mm
190 mm
152mm
mm(6")
(6")
(4")
190 152
mm mm
102 mm 102
mmmm
(7.5")
(7.6")
208
mm
(7.5")
190
mm
(7.6")
190
mm
(6")
(4") 190 mm (7.5")
(7.6")
190
mm
(6")
190
mm
(4")
152
mm
190
mm
(7.5")
208
mm
(4")
190
mm
(6")
mmmm
152
mm
208 208
mm
(8.2")
208
(7.5") 152 mm 190 mm
(7.5")
(7.5")
(7.5")
(7.5")
(6")
(6")
(8.2")
(7.5")
190(7.5")
mm
(8.2")
208
mm
190 mm
(6")
(8.2")
(8.2")
mm
6-INCH
45208
∞ HORIZONTAl
ElboW
208
mm
ElboW
6-incH 90 ∞ uP
(7.5")
190
mm
(7.5")
190
mm
(7.5")
(8.2")
3069-A
3070-A
3065-A
mm
6-INCH
45
ElboW
(8.2")
∞ uP
ElboW
6-INCH
45∞∞HORIZONTAl
HORIZONTAl
208
mm
190
mm
6-incH
90
ElboW
(8.2")
6-incH
90
6-INCH
45
∞
HORIZONTAl
ElboWElboW
uP
ElboW
6-INCH
45 ∞Elbow
HORIZONTAl
ElboW
6-incH
90ElboW
HORIZONTAl
90∞∞HORIZONTAl
∞ uP
∞ uP
ElboW
6-incH
90
(7.5")
ElboWElboWElboW
90°
Up
45°208
Horizontal
6-incH
90∞Elbow
90° Horizontal
Elbow
208
mm
∞HORIZONTAl
6-incH6-incH
90 ∞HORIZONTAl
6-incH
90
3070-A
3069-A
3065-A
(7.5")
(8.2")
3070-A3070-A
3069-A3069-A3069-A
3065-A3065-A
3070-A
3065-A
(8.2")
6-INCH
45 45
∞ HORIZONTAl
ElboW
∞ uP
ElboW
6-INCH
∞ HORIZONTAl
ElboW
6-incH
90(7.5")
6-INCH
45 ∞ HORIZONTAl
ElboW
∞ uP
ElboW
(8.2")
6-incH
90
(PFGF-PH4E-B)
6-INCH 45 HORIZONTAl ElboW
3070-A
Cover
:3070-A
PFGC-PH4E-B
(PFGF-PH9E-B)
Cover : PFGC-PH9E-B
HORIZONTAlElboW
ElboW
6-incH90
90∞∞HORIZONTAl
6-incH
HORIZONTAl
3069-A ElboW
6-incH 90 ∞3069-A
3069-A
3069-A
ElboW
6-incH 90 ∞HORIZONTAl
6-incH 90 ∞HORIZONTAl
3069-AElboW
3069-A
3065-A
ElboW
6-incH 90 ∞ uP
3065-A
3065-A
∞
147 mm
(5.8")
147147
mmmm
147 mm
189 mm
(7.4")
189 mm
189 mm
147 mm 147 mm
(5.8")
(5.8")
147147
mm
(5.8")
mm
(5.8")
mm
(5.8")147
189 mm
(7.4")
189 mm
189 mm
189
189mm
mm mm
189
189
mm(7.4")
(7.4")
189
mm
(7.4")
189
mm(7.4")(7.4")
(5.8")
(5.8")
(5.8")
102 mm
(4")
(PFGF-PUPE-B)
Cover : PFGC-PUPE-B
3065-A
3065-A3065-A
6-INCH 45 ∞ HORIZONTAl
ElboW
3070-A
3070-A
3070-A
6-INCH 45 ∞ HORIZONTAl ElboW
3070-A
152 mm
(6") 152
mm
152
mm
152 152
mm mm
152 mm
152152
mmmm
(6")
(6")
(6")
152 (6")
mm(6")
143 mm
189 mm
189 189
mm mm
147147
mmmm
102
mm
mm
(6")(6")
189
mm
(5.6")
(7.4")
(5.8") 102 mm
(7.4")
102
mm
(7.4")
(7.4")
102102
mm
(7.4")
189
(7.4")
(6")
(5.8")
143mm
mm
189mm
mm
152
mm 143 mm
(7.4")
143
mm
(7.4")
189
mm
143143
mm
102
mm
(4")
152
mm
(4")
(4")
(7.4")
189 mm
102
(4")
102mm
mm(4")
(7.4")
143 mm
(5.6")
(5.6")
(7.4")
(6")
(5.6")
189
mm
(5.6")
102(7.4")
mm
143
(4")
(5.6")
(6")
143mm
mm
178
mm
189
mm
(7.4")
(4")
(4")
(5.6")
102
mm
152
mm
(4")
(7.4")
(5.6")
102 mm 102 mm
102 mm
152 mm
(5.6")
(7.4")
178 mm (7")
176 mm
102
mm
178
mmmm
143143
mmmm
(4")
(6")(4")
102102
mmmm
178
mm152
178178
mmmm
102 mm
(7")
152 mm(6")
102(4")
mm(4")
152
mm176 mm
(5.6")
(4")
(6.9")
178 mm (7")(7")(6")
152
mm
152
(5.6")
152152
mmmm
102
mm
(4")
152
mm
176
mm
102
mm(4")
(7")
152
mm mm
176
mm
178
mm
102
mm
(6")
(4")
(7")
152
mm
152
mm
(4")
176
mm
178
mm
(6") (6.9")
176 mm
(7")
152
mm (6") (6")
(6")
6-incH 90 ∞ DoWn
ElboW
102mm
mm
6-INCH 45 ∞ uP
ElboW
152
176 mm
(6")
(4")
152mm
mm(6")
(6.9")
(4")
(4")
102
(6.9")
(7")
152
mm
(6")
102102
mmmm
(6")
(6.9")
(7")6-INCH 45 uP ElboW 3067-A
152
mm (6")
3066-A
6-INCH
45
∞ DoWn
ElboW
176
(6.9")
ElboW
102102
mmmm 6-incH 90 DoWn
102
mm
(6")
176mm
mm
(4")
(6.9")
178178
mmmm
(6")
(4")
(6")
3068-A
3067-A
3066-A 6-incH(6")
(4")
152
mm
6-INCH 45 DoWn ElboW
(4")
102
mm
(4")
90(6")
∞ DoWn ElboW
6-INCH
45
∞ uP ElboW
102
mm
(6.9")
(7")
152
mm
152
mm
6-incH
90
∞
DoWn
ElboW
(4")
(4")
6-INCH
45
∞
uP
ElboW
(6.9")
∞ DoWn
6-incH
90
3068-A
6-INCH
∞ uP
ElboW
∞ DoWn
6-incH
ElboW
(7")
152
mmElboW
6-INCH
45 ∞ uP45
ElboW
3067-A
6-INCH
45
∞ DoWn ElboW
6-incH
90 ∞90
DoWn
ElboW
176176
mmmm6-INCH6-INCH
6-INCH 45
∞ uP ElboW 3067-A
3066-A 3066-A
45
∞∞DoWn
ElboW
(4")
3067-A
6-INCH
45
DoWn
(4")
3067-A
3066-A3066-A(6")
45 ∞102
DoWn
ElboWElboW
mm
(6")(6")
3068-A
3067-A
3066-A
6-INCH
45 ∞ DoWn102
ElboW
(6.9")
∞
90 90
DoWn
ElboW
6-INCH
45 45
∞ uP
ElboW
3068-A
mm
(6")
6-incH
∞ DoWn
ElboW
90°6-incH
Down
Elbow
45°
Down
Elbow
45°
Up
Elbow
6-INCH
∞
uP
ElboW
3068-A
(6.9")
3068-A
3068-A
3067-A
3066-A
6-INCH
45 45
∞ DoWn
ElboW
(4")
3067-A
3066-A
6-INCH
∞ DoWn
ElboW
45
mm
(4")
6-incH 90 ∞ DoWn ElboW
45 mm
152 mm
6-INCH 45 ∞ uP ElboW
3068-A
(PFGF-PDNE-B)
(PFGF-PD4E-B)
(PFGF-PU4E-B)
1526-INCH
mm3068-A
6-incH 90 ∞ DoWn
ElboW
6-INCH 45 ∞ uP3067-A
ElboW
(1.75")
3066-A
45 ∞ DoWn ElboW
(1.75")
(6")
3067-A
3066-A
ElboW
(6")45 ∞ DoWn
456-INCH
mm
3068-A
45
152mm
mm
3068-A
Cover : PFGC-PDNE-B
: PFGC-PD4E-B
Cover : PFGC-PU4E-B
45 mm
mm Cover
45 mm45 mm
152
mm
(1.75")
mm(6")
152 mm 152152
(1.75")
(1.75")
45
mm
(1.75")
(1.75")
45
mm
102
mm
102
mm
(6")
239 mm
239 mm
152
(6")
(6")
169 mm
169 mm
152mm
mm(6")
(1.75")
(4")
(4")
(1.75")
(9.4")
mm
(6.7") (6.7")
(9.4")
(6")
(6")
45 45
mm
152
mm
102
mm
mm
239
mm
169 mm
(1.75")
102
mm
45 mm 102 mm102152
102
mm mm
mm
mm
(1.75")
239 mm
239
mm
(6")
152
169 169
mm169
169
mm
239239
mm
(4")
mmmm
(9.4")
(6")
(6.7")
(4")
(1.75")
(4")
(4")
(9.4")
102
mm
(6.7")
(4")
(9.4")
(9.4")
(6.7")
(6")
102 mm
239
(9.4")
169
239mm
mm
(6.7")
169mm
mm(6.7")
(4")
(4")
(9.4")
(6.7")
(9.4")
(6.7")
289 mm
102102
mmmm
239239
mmmm
290 mm
169169
mmmm
289 mm
(4")
91 mm
(11.4")
(9.4")
(6.7") 91 mm
(4")
(11.4") 290 mm (9.4")
91 mm
(11.4")(6.7")
(3.6")
(3.6") 91 mm
(11.4")
289 mm
(3.6")
(3.6")
290
mm
289 mm289
mm
91 mm
289 289
mm mm
102 mm
(11.4")
290 mm 290
91 mm
mm
mm
91 mm
290 290
mm(11.4")
(11.4") (11.4")
91
91 mm 91
91mm
mm
(11.4")
289
91 mm
(3.6")
(4")
91mm
mm
(11.4")
(11.4") (11.4")
289mm
mm
91 mm
(3.6")
(11.4")
(3.6") (3.6")
290
(11.4")
290mm
mm
(3.6")
6-INCH (3.6")
4-SIDED TRUMPET FLARE
6-INCH 3-SIDED TRUMPET FLARE
9191mm
(11.4")
(3.6")
(3.6")
mm(3.6")
9191mm
(11.4")
(3.6")
289
mm
3074-A
3073-A
mm
(11.4")
mm
(11.4")
290
mm
6-INCH 3-SIDED289
TRUMPET
FLARE
(3.6")
(3.6")
290
mm
(3.6")
91
mm
(11.4")
(3.6")
3074-A
3073-A
91 mm
(11.4")
(11.4")
91 91
mmmm
(11.4")
(3.6")
(3.6")
(3.6")
(3.6")
∞
∞
∞
3073-A
6-INCH
4-SIDED
TRUMPET
FLARE
4-SIDED
TRUMPET
3073-A
6-INCH6-INCH
4-SIDED
TRUMPET
FLARE FLARE
6-INCH 3-SIDED TRUMPET FLARE3074-A
6-INCH
3-SIDED
TRUMPET
FLARE
3-SIDED
TRUMPET
3074-A
6-INCH6-INCH
3-SIDED
TRUMPET
FLARE FLARE
3074-A
3074-A3074-A
6-INCH
3-SIDED
TRUMPET
FLARE
6-INCH
3-SIDED
TRUMPET
FLARE
3074-A
3074-A
3074-A
3074-A
3073-A
3073-A
3073-A
6-INCH
4-SIDED
TRUMPET
FLARE
6-INCH
4-SIDED
TRUMPET
FLARE
3073-A
3073-A
3073-A
3073-A
3-Sided Trumpet Flare
(PFGF-PTRM-B)
305 mm
(12")
305 mm
(12")
102 mm
(4")
305 mm
305 mm
(12")
(12")
305
mm
305305
mmmm
152 mm
102 mm
(6")
(4")
32 mm
(1.2")
105 mm
(4.1")
6-INCH TO 12-INCH CONVERSION
TO 12-INCH
CONVERSION
6-INCH6-INCH
TO 12-INCH
CONVERSION
4x6 to 4x12
Conversion
6-INCH
TOTO
12-INCH
CONVERSION
6-INCH
12-INCH
CONVERSION
(PFGF-PDSA-B/F)
Cover : PFGC-PDSA-B/F
3075-A
3075-A
3075-A
3075-A
32 mm
(1.2")
104 mm
(4.1")
105 mm
165
mm
(4.1")
32 mm
32 mm
(1.2")
104 mm
32
mm
32(1.2")
mm
32 mm
(6.5")
56 mm
175 mm(12")
105 mm
105 mm
305
mm
(12")
305
mm(12")
(2.2")
(6.9")
(4.1")
(4.1") 105
mm
(12")
105
mm
165
mm
(12")
102
mm
105
mm
305
mm
102 mm 152
mm
305 mm
(4.1")
(6.5")
(4.1")
(4")
105
(4.1")
(12")
(4")102
56 mm
105mm
mm
175 mm
(6")
mm
(12")
102 102
mmmm
(4.1")
(2.2")
165 mm
(4.1")
(6.9")
16512480-A
mm
(4")
(4")
1523075-A
mm
102
(4")
152
mm
105105
mmmm
102mm
mm
(6.5") 56 mm
(6.5") 165 mm
(4.1")
56 mm
175 mm (4.1")
(4")
175 mm
(6") 152 mm(6")
165
mm
(4")
165
mm
102
mm
152
mm
102 mm 152 mm
(2.2")
(2.2")
(6.5")
(6.9")
(6.9") 175 mm
(6.5")
56
mm
165
mm
(6.5")
56
mm
(6")
165
mm
56
mm
175
mm
(6")
152
mm
175
mm
(6")
(4")(4")
152 mm 6-INCH TO 12-INCH CONVERSION
(2.2")
(6.5")
12480-A
3075-A
(2.2")
(6.9")
(6.5")
56
mm
165
mm
(2.2")
(6.9")
56
mm
175
mm
(6")
(6.9")
175
mm
(6")
165 mm
152152
mmmm
(2.2")
(6.5")
(2.2")
(6.9")
(6.9")
(6.5")
175
mm
56 56
mmmm
CONVERSION
6-INCH
TO
12-INCH
CONVERSION
175
mm
(6")(6")6-INCH TO 12-INCH
12480-A
3075-A
12480-A (2.2")
3075-A
(6.9")
(2.2")
(6.9")
3075-A
3075-A 3075-A
4x6 Plenum to
4x6 Standard Conversion
(PFGF-PPSC-B)
No Cover
(PFGF-PFPT-B)
12480-A
Junction
12480-A
12480-A
12480-A
12480-A
(PFGF-PJWR-B)
12480-A
12480-A
www.adc.com/in
158 mm
(4.1")mm
(1.2")
(1.2")
mm(1.2")
(6.2")3232
104 mm
(1.2")
(1.2")104 mm
32 32
mmmm(4.1")
(4.1")
104
mm
(1.2")
104
mm
104
mm
158
mm
(1.2")
(4.1")
(4.1")
104
(6.2")
(4.1")
104mm
mm
12481-A
(4.1")
(4.1")
158 mm
104104
mmmm
(4.1")(6.2")
(4.1")
158 mm
(6.2")
158
mm
158158
mmmm
(6.2")
(6.2")
158
(6.2")
158mm
mm
(6.2")
12481-A
(6.2")
158158
mmmm
(6.2")
12481-A Cap
End
(6.2")
12481-A
12481-A
12481-A
12481-A
(PFGF-PMEC-B)
12481-A
12481-A
12481-A
12481-A
107
06/10
•
401326IN
251251
mmmm
251251
mmmm
251 mm
(9.5")
(9.5")
(9.5")
251
(9.5")
251mm
mm
(9.5")
251
mm
(9.5")
(9.5")
mm
251251
mm
(9.5")
(9.5")
251 mm
(9.5")
4x12 System – 4" H x 12" W
Product Number
Number of
Junctions
Description
Fitting
Snap-on Cover
–
PFGF-PSHS-F
PFGC-PSHS-F
Horizontal T
3
PFGF-PHRT-F
PFGC-PHRT-F
Horizontal cross
4
PFGF-PHXP-F
PFGC-PHXP-F
2
PFGF-PHRT-F/B
PFGC-PHRT-F/B
PFGF-PH9E-F
PFGC-PH9E-F
2
PFGF-PH4E-F
PFGC-PH4E-F
90° up elbow
2
PFGF-PUPE-F
PFGC-PUPE-F
90° down elbow
2
PFGF-PDNE-F
PFGC-PDNE-F
45° degree up elbow
2
PFGF-PU4E-F
PFGC-PU4E-F
45° degree down elbow
2
PFGF-PD4E-F
PFGC-PD4E-F
4x12 trumpet flare; 3 sided
–
PFGF-PTRM-F
–
4x12 trumpet flare; 4 sided
4x12 trumpet flares
–
PFGF-PFPT-F
–
4x12 junction
–
PFGF-PJWR-F
–
4x12 end cap; 4x12 junction included
–
PFGF-PMEC-F
–
480 mm
(18.9")
480 mm
(18.9")
480
mm
305 mm
(12")
305
mm
305 mm
(12")
(12")
102 mm
102 mm
(4")
(4")
102
mm
(4")183 mm
183 mm
(72")
(72")
183 mm
305 mm
(12")
305 mm
(12")
305
mm
(12")
(72")
(18.9")
102 mm
102 mm
(4")
(4")
102 mm
382 mm
(4")
382 mm
(15.4")
(15.4")
382
mm
(15.4")
480 mm
(18.9")
480
mm
Straight Section
(PFGF-PSHS-F)
Cover: PFGC-PSHS-F
305 mm
(12")
305 mm
(12")
305
mm
(12")
Horizontal
Cross
(PFGF-PHXP-F)
Cover: PFGC-PHXP-F
3083-A
3084-A
3083-A
12-INCH STRAIGHT SECTION
3076-A
(18.9")
(12")
Horizontal T
(PFGF-PHRT-F)
12-INCH
HORIZONTAl tEE
Cover: PFGC-PHRT-F
480 mm
(18.9")
480 mm
(18.9")
480
mm
(18.9") 102 mm
102 mm
(4")
(4")
102
mm
305 mm
(4")305 mm
(12")
(12")
305
mm
3076-A
3076-A
480 mm
(18.9")
3084-A
3083-A
3084-A
•
401326IN
4x12/4x6 horizontal T
06/10
4x12 fittings
102 mm
(4")
102
mm
327 mm
(12.9")
327
mm
327 mm
(12.9")
102 mm
(4")
(4")
392 mm
392 mm
(15.4")
(15.4")
392
mm
(15.4")
(12.9")
117 mm
(4.61")
117
mm
187 mm
(7.36")
91.4 mm
91.4 mm
(3.6") 187 mm
(7.36")
(3.6")
187
mm
91.4
mm
(7.36")
(3.6")
51 mm
51(2")
mm
3061-A
12" x 6" x 12" HORIZONTAl tEE
3087-A
102 mm
(4")
(4")
305 mm
305 mm
(12")
www.adc.com
in
188 /mm
188 mm
(7.4")
188
mm
(7.4")
102 mm
(7.4")
3062-A
3062-A
3061-A
102 mm
(4")
102
mm
(6.46")
(2")
3061-A
3087-A
102 mm
102 mm
(4")
(4")
102
mm
164 mm
51 mm
164 mm(4")(6.46")
(2")
(6.46")
164
mm
51 mm
(2")
(2")
51 mm
51(2")
mm
152 mm
(6")
(6")
3087-A
152 mm
(6")
152
mm
(4.61")
189 mm
117 mm
(4.61")
3062-A
188 mm
(7.4")
188
mm
188 mm
(7.4")
147 mm
(5.8")
147
mm
(5.8")
(7.4")
305 mm
147 mm
(5.8")
108
102 mm
(4")
102
mm
(4")
178 mm
305 mm
102 mm
(4")
(12")mm 305
183
mm
(72")
(12")
(4")
(72")mm(4")
mm
305
(72")
183
mm
305 mm
183
(12")
183 mm
(72")
(12")(12") (12")
(72")(72") (72")
305
mm
183
mm
305 mm
183
mm
(72")
12-INCH STRAIGHT
SECTION
(12")(12")
3076-A
(72")
3076-A
3076-A
(12")
305 305
mm mm
(12")(12")
305
mm
(12")
(12")mm 305
(12")
(12")
(12")
(4")mm
mm
305
mm
305
305 mm
(4")305
305 mm
(12")
(12")
(12")(12") (12")
(12")(12") (12")
305
mm
305
mm
305 mm
305 mm
(12")
12-INCH
HORIZONTAl
cross
(12")(12")
12-INCH HORIZONTAl
cross
(12")
12-INCH
HORIZONTAl
3084-Across
(15.4")
(15.4")
(15.4")
382 382
mm mm
(15.4")
(15.4")
12-INCH HORIZONTAl
tEE HORIZONTAl tEE
12-INCH
3083-A
3083-A12-INCH HORIZONTAl
tEE
3083-A
12-INCHtEE
HORIZONTAl
tEE
12-INCH
HORIZONTAl
3083-A
12-INCH
HORIZONTAl
tEE
3076-A SECTION
12-INCH
STRAIGHT
12-INCH12-INCH
STRAIGHT
SECTION
STRAIGHT
SECTION
3076-A
3076-A
3076-A
3084-A
3084-A cross
12-INCH HORIZONTAl
3084-A
12-INCHcross
HORIZONTAl
cross
12-INCH
HORIZONTAl
12-INCH
HORIZONTAl3084-A
cross
3083-A 3083-A 3083-A
3084-A 3084-A
12-INCH STRAIGHT 3076-A
SECTION
3076-A
12-INCH HORIZONTAl
cross
3084-A
3083-A
3083-A
3084-A
4x12 System – 4" H x 12" W
Horizontal Elbow
06/10
•
401326IN
327
mm
327 mm 327
mm
327
mm
(12.9")
(12.9")
(12.9")
327
mm
327 mm
327 mm
(12.9")
(12.9")
(12.9")
(12.9")
327 327
mm mm
(12.9")
(12.9")
(PFGF-PH9E-F)
Cover:
PFGC-PH9E-F
2-INCH 3-SIDED
TRUMPET FLARE
4x12/4x6 Horizontal T
(PFGF-PHRT-F/B)
Cover: PFGC-PHRT-F/B
2-INCH
3-SIDED TRUMPET FLARE
2-INCH 3-SIDED TRUMPET
FLARE
2-INCH 3-SIDED
TRUMPET
FLARE
3061-A
3061-A
2-INCH 3-SIDED
TRUMPET FLARE
3061-A
2-INCH
3-SIDED
TRUMPET FLARE
3061-A
2-INCH2-INCH
3-SIDED3-SIDED
TRUMPET
FLARE
TRUMPET
FLARE
12" x 6"tEE
x 12" HORIZONTAl tEE
12" x 6" x 12" HORIZONTAl
12" x 6" x 12"
HORIZONTAl
tEE
3087-A
3087-A
3087-A
12" x 6" x 12"
HORIZONTAl tEE
3087-A
12" x 6" x 12"
HORIZONTAl tEE
12" x 6"
x 12"
tEE
12"
x 3087-A
6"HORIZONTAl
x 12" HORIZONTAl
3087-A tEE
3061-A 3061-A 3061-A
3087-A
12" x 6" x 12" HORIZONTAl
tEE
3087-A
3061-A
3061-A
3087-A
188
mm
188
mm 188 mm 188
188 mm 188
mm
mm
188
mm
188
mm
(7.4")
(7.4")
(7.4")
(7.4")
(7.4")
(7.4")
188
mm
188
mm
188 mm
188 mm
188 mm
188 mm
(7.4")
(7.4")
(7.4")(7.4")(7.4")
(7.4")(7.4")(7.4")
188 188
mm mm
188 188
mm mm
(7.4")
(7.4")
(7.4")
(7.4")
102
mm
102 mm 102
305
mm
mm
305 mm 305
mm
mm
(4")
(4")mm 102
mm
(12")
(4")
(12")mm 305
102
mm
102
(12")
305
mm
102 mm
305
(4")
305
mm
(12")
(4") (4") (4")
(12")(12") (12")
102 102
mm mm
305 305
mm mm
12-INCH 90 ∞DoWn ElboW
∞DoWn ElboW
(12")
(4") (4") 12-INCH 90 3078-A
12-INCH 90 ∞DoWn
ElboW
3078-A
(12")
12-INCH 90 ∞3078-A
DoWn ElboW
102
mm
102 mm 102
mm
mm
(4")
(4")mm 102
(4")
102
mm
102
102 mm
(4")
(4") (4") (4")
102 102
mm mm
(4") (4")
305
mm
189
mm 305 mm 305
189 mm 189
mm
mm
305
mm
(12")
189
mm
(7.5")
(12")
(7.5")
(12")
(7.5")
305
mm
305
mm
189
mm
189 mm
305
mm
189 mm
189
mm(12")
(7.5")
189 mm 189
mm
(12")
(7.5")(7.5")(7.5")
(12") (12")
189
mm
(7.5")
305
(7.5")
(7.5")
305
mm
189
mmmm
189 189
mm mm
189 mm
189
mm
(7.5")
(12")
12-INCH 90 ∞uP ElboW
(7.5")
(7.5")
12-INCH 90 ∞3077-A
uP(12")
ElboW
(7.5")
(7.5")
(7.5")
3077-A
3077-A
189
12-INCH
90
∞mm
uP ElboW
189
mm
12-INCH3077-A
90 ∞uP ElboW
(7.5")
3077-A Up Elbow
3077-A
90°
(7.5")
3077-A
90° Down Elbow
(PFGF-PDNE-F)
Cover: PFGC-PDNE-F
3078-A
12-INCH 90 ∞DoWn12-INCH
ElboW 90 ∞DoWn ElboW
12-INCH
90 ∞DoWn ElboW
3078-A
3078-A
3078-A
(PFGF-PUPE-F)
Cover: PFGC-PUPE-F
3077-A
3077-A
12-INCH 90 ∞DoWn ElboW
12-INCH 90 ∞DoWn3078-A
ElboW
3078-A
305
mm
305 mm 305
mm
mm
(12")
(12")mm 305
(12")
305
mm
305
305 mm
(12")
(12")(12") (12")
305 305
mm mm
(12")(12")
143
mm
143 mm 143
mm
143
mm
(5.6")
(5.6")
(5.6")
143
mm
143 mm
143 mm
(5.6")
(5.6")(5.6")(5.6")
143 143
mm mm
102
mm
(5.6")
102 mm 102
mm
(5.6")
mm
(4")
176
mm
(4")mm 102
(4")
176 mm 176
102
mm
mm
102
102
mm
(4")
176
mm
(6.9")
(6.9")
(4")
(6.9")
176
mm (4")
176 mm
(4")
176 mm
102
(6.9") 10212-INCH
45°mm
DoWn ElboW
12-INCH 45° DoWn ElboW
45° DoWn ElboW
(6.9") 12-INCHmm
(6.9")(6.9")
(4")
(4")
176 176
mm mm
45° DoWn ElboW
(6.9") 12-INCH45°
Down Elbow
(6.9")
91.4
mm
91.4 mm 91.4
mm
mm
(3.6")
(3.6")mm 91.4
(3.6")
91.4
mm
91.4
91.4 mm
(3.6")
(3.6")(3.6")(3.6")
91.491.4
mm mm
(3.6")
(3.6")
FLARE3-SIDED TRUMPET
12-INCH
3086-A FLARE
3080-A
3080-A
3080-A
3086-A
3080-A
3080-A
3086-A
(PFGF-PD4E-F)
Cover: PFGC-PD4E-F
FLARE
3086-A
3080-A
3086-A
3080-A
Junction
(PFGF-PJWR-F)
152
mm
152 mm 152
mm
mm
(6")
(6")mm 152
(6")
152
mm
152
152 mm(6")
102 mm
(6") (6") (6")
(4")
152 152
mm mm
102
mm
102(6")
mm 102
mm
(6")
mm
305(4")
mm
102
mm
(4")
51 mm
30551
mm
51
mm
(4")
102
mm
102
(12") mm
51(12")
mm
(2")
102 mm
(4")
(2")
(2")
51 mm
51 mm
346 mm (4") 164
(4")
51 mm
(2")
mm
(4")
mmmm 164
102
mm
39.22
mm164
(2")
(13.6")
(2")
102164
mm
51
mm
5151
mm
mm
(6.46")
51(2")
mm 51
(6.46")
(15.44")
(4")
(6.46")
51(2")
mm
mm
(2")
164
mm
164 mm
164(4")
mm
(6.46")
51(2")
mm
(2")
51 mm
51 mm
(2")
(2")
(6.46")
(6.46")
(6.46")
(2") (2") (2")
164 164
mm mm
51
mm
51 mm
(6.46")
2-INCH
TO
6-INCH
CONVERSION
2-INCH
TO 6-INCH2-INCH
CONVERSION
45°
Horizontal
Elbow
(6.46")
TO 6-INCH
CONVERSION
3062-A
(2") (2")
3062-A
2-INCH TO 6-INCH
CONVERSION
3062-A
31.5
mm
31.5 mm 31.5
mm
mm
(1.2")
(1.2")mm 31.5
(1.2")
31.5
mm
31.5
31.5 mm
(1.2")
(1.2")(1.2")(1.2")
31.5
mm
104
mm
10431.5
mm
mm104
mm
104
mm
(1.2")
(4.1")
(4.1")
(4.1")
104
mm
104(1.2")
mm
104 mm
(4.1")
(4.1")(4.1")(4.1")
310
mm
104 104
mm mm
310 mm 310
mm
(4.1")(12.2")
310
mm
(12.2")
(4.1")
(12.2")
310
mm
310 mm
310 mm
(12.2")
(12.2")
(12.2")
(12.2")
310 310
mm mm
(12.2")
12479-A
12479-A
(12.2")
12479-A
12479-A
12479-A
12479-A
12479-A
3062-A
3062-A 3062-A 3062-A
3062-A
3062-A
147
mm
147 mm 147
mm
147
mm
(5.8")
(5.8")
(5.8")
147
mm
147 mm
147 mm
(5.8")
(5.8")(5.8")(5.8")
102
mm
102
mm
147 147
mm mm102 mm 102
mm
(4")
(4")mm 102
(5.8") 102
(4")
mm
(5.8")
102 mm(4")
(4") (4") (4")
102 102
mm mm
(4") (4")
305
mm
178
mm
305 mm 305
mm
178 mm 178
mm
305
mm
(12")
178
mm
(7") (12")
(12")
(7")
305
mm
(7")
305
mm
178 mm
178 mm
305 mm
(12")
178 mm
(7")
(12")(12") (12")
(7") (7") (7")
305 305
mm mm
178 178
mm mm
12-INCH 45° uP ElboW
12-INCH 45° uP ElboW 12-INCH
45° uP ElboW
(12")(12")
(7") (7")
3079-A
3079-A
3079-A
12-INCH 45°
uP ElboW
45° Up Elbow
(PFGF-PU4E-F)
Cover: PFGC-PU4E-F
3079-A
12-INCH 45°
uP ElboW
3079-A
3079-A
3079-A
3079-A
3079-A
239
mm
239 mm 239
mm
239
mm
(9.4")
(9.4")
(9.4")
239
mm
239 mm
239 mm
(9.4")
(9.4")(9.4")(9.4")
239 239
mm mm
(9.4")
(9.4")
441
mm
441 mm 441
mm
441
mm
(17.4")
(17.4")
(17.4")
441 mm
441 mm
441 mm
(17.4")
(17.4")
(17.4")
(17.4")
441 441
mm mm
(17.4")
(17.4")
91.4
mm
91.4 mm 91.4
mm
mm
(3.6")
(3.6")mm 91.4
(3.6")
91.4
mm
91.4
91.4 mm
(3.6")
(3.6")(3.6")(3.6")
TRUMPET
FLARE4-SIDED TRUMPET
91.491.4
mm mm 12-INCH 4-SIDED3085-A
12-INCH
3085-A FLARE
3085-A
4-Sided
Trumpet
(3.6")
12-INCH 4-SIDEDFlare
TRUMPET FLARE
(3.6")
3085-A
12-INCHFLARE
4-SIDED
TRUMPET FLARE
12-INCH 4-SIDED TRUMPET3085-A
FLARE
(PFGF-PFPT-F)
3085-A
3085-A
3085-A
12479-A
12479-A
End
Cap
(PFGF-PMEC-F)
www.adc.com/in
102 m
(4")
2-INCH
TO 6-INCH CONVERSION
2-INCH
TO 6-INCH
CONVERSION
(PFGF-PH4E-F)
2-INCH
TO 6-INCH
CONVERSION
Cover:
PFGC-PH4E-F
2-INCH
TO 6-INCH CONVERSION
FLARE
3085-A
105
mm
105 mm 105
mm
105
mm
(4.1")
(4.1")
(4.1")
105
mm
105 mm
105 mm
(4.1")
(4.1")(4.1")(4.1")
mm
105 105
mm318
318 mm
(4.1") mm 318 mm
(4.1")
318
mm
(12.5")
(12.5")
(12.5")
318
mm
318 mm
55.9
mm
318 mm
(12.5") 55.9 mm 55.9
mm
(12.5")
(12.5")
mm
(2.2")
(12.5")
(2.2")mm 55.9
318
mm
(2.2")
55.9
mm
55.9
318 mm
55.9 mm
(2.2")
(12.5")
(2.2")(2.2")(2.2")
12478-A
(12.5")
12478-A
12478-A
55.9 mm
12478-A55.9 mm
(2.2")
12478-A
12478-A
(2.2")
12478-A
12478-A
12478-A
3086-A
3086-A
12-INCHFLARE
3-SIDED
TRUMPET FLARE
12-INCH
3-SIDED TRUMPET3086-A
FLARE
3086-A
(PFGF-PTRM-F)
3080-A
3080-A
169
mm
169 mm 169
mm
169
mm
(6.7")
(6.7")
(6.7")
169
mm
169 mm
169 mm
(6.7")
(6.7")(6.7")(6.7")
169
mm
169
mm
441
mm
441 mm 441
mm
(6.7")
(6.7")
441
mm
(17.4")
(17.4")
(17.4")
441
mm
441 mm
441 mm
(17.4")
(17.4")
(17.4")
(17.4")
441
mm
441 mm
(17.4")
(17.4")
359 mm
(14.13")
109
102
mm
102 mm 102
mm
mm
(4")
(4")mm 102
(4")
102
mm
102
102 mm(4")
(4") (4") (4")
102 102
mm mm
392
mm
392 mm 392
mm
(4")
(4")
392
mm
(15.4")
(15.4")
(15.4")
392
mm
392 mm
392 mm
(15.4")
(15.4")
(15.4")
(15.4")
392 392
mm mm
(15.4")
(15.4")
405 mm
(16")
319 mm
(12.6")
117
mm
117 mm 117
mm
117
mm
(4.61")
(4.61")
(4.61")
117
mm
117 mm
117 mm
(4.61")
(4.61")
(4.61")
(4.61")
117 117
mm mm
(4.61")
(4.61")
305
mm
187
mm
91.4
mm
187 mm 187
91.4 mm 91.4
mm
mm
(12")
mm
(7.36")
mm (7.36")
(3.6")
392
mm187
(3.6")mm 91.4
(7.36")
(3.6")
187
mm
187
mm
91.4
mm
91.4
187 mm
91.4 mm
(7.36")
(3.6")
(15.4")
(7.36")
(7.36")
(3.6")(3.6")(3.6")
(7.36")
187 187
mm mm
91.491.4
mm mm
(7.36")
(3.6")
(7.36")
(3.6")
Accessories (Support Bracket Kits)
59 mm
(2.3")
59 mm
(2.3")
209 mm
(8.2")
401326IN
•
06/10
916 mm
(36.1")
Long Bracket Kit
(PFGF-LSPT-C/B/F)
3144-A
59 mm
(2.3")
59 mm
(2.3")
59 mm
(2.3")
Short Bracket Kit
(PFGF-SSPT-C/B)
SHORT BRACKET KIT
59 mm
(2.3")
664 mm
(26.1")
479 mm
(18.8")
59 mm
(2.3")
59 mm
(2.3")
59 mm
(2.3")
Span Bracket Kit
(PFGF-ESPT-C/B/F)
Diagonal Span Bracket Kit
(PFGF-DSPT-C/B/F)
sPAN BRACKET KIT
LONG BRACKET KIT
3145-A
3873-A
DiAGonAl sPAN BRACKET KIT
3874-A
59 mm
(2.3")
209 mm
(8.2")
664 mm
(26.1")
479 mm
(18.8")
59 mm
(2.3")
916 mm
(36.1")
59 mm
(2.3")
59 mm
(2.3")
Long Bracket Kit with
Square U-bolt
(PFGF-EALSPT-C/B/F)
Short Bracket Kit with
Square U-bolt
(PFGF-EASSPT-C/B)
Span Bracket Kit with
Square U-bolt
(PFGF-EAESPT-C/B/F)
59 mm
(2.3")
Diagonal Span Bracket
Kit with Square U-bolt
(PFGF-EADSPT-C/B/F)
Description
Product Number
Short bracket kits
For use with 2x2 and 4x6 sizes; 8.21" overall length
PFGF-SSPT-C/B
With square U-bolt for easy access mounting
PFGF-EASSPT-C/B
Long bracket kits
For use with 2x2, 4x6, and 4x12 sizes; 18.84" overall length
PFGF-LSPT-C/B/F
PFGF-EALSPT-C/B/F
Span bracket kits
For use with 2x2, 4x6, and 4x12 sizes; spans 24" center to center floor struts
PFGF-ESPT-C/B/F
PFGF-EAESPT-C/B/F
Diagonal span bracket kits
For use with 2x2, 4x6, and 4x12 sizes; spans diagonally up to 34" between struts
PFGF-DSPT-C/B/F
PFGF-EADSPT-C/B/F
www.adc.com/in
110
Accessories (Flexible Tubing)
Flexible tubing options include a two-hose adapter that can be attached to a 6-inch standard fitting or
straight section. The two-hose adapter comes complete with two 5-foot-long flexible hoses, and two
end finishing couplers. When longer flexible tube requirements exist, multiple 5-foot-long extension
tubes can be spliced into the two hose adapter to reach any length. The extension tubes are 5 feet long,
and come with a splice coupler. Additional finishing couplers, mounting straps and splice couplers can
be purchased separately.
Description
Product Number
One hose adapter, with 1.53 m (5') hoses and finishing couplers
For use with 2x2 openings
PFGF-KT03-C
Two hose adapter, with 1.53 m (5') hoses and finishing coupler
For use with 4x6 openings
PFGF-KT03-B
Extension tube; 1.53 m (5') long with splice coupler
PFGF-HEXT
Finishing coupler
PFGF-HFIN
Mounting strap
PFGF-HMST
Splicing coupler
PFGF-HSPL
Flexible tubing; 51 mm (2") inner diameter (X = length in feet: 5, 15, 35, 75, 110, 150)
PFGF-MIDY-XF
Extension Tube
(PFGF-HEXT)
Finishing Coupler
(PFGF-HFIN)
Splicing Coupler
(PFGF-HSPL)
Mounting Strap
(PFGF-HMST)
06/10
Two Hose Adapter
(PFGF-KT03-B)
One Hose Adapter
(PFGF-KT03-C)
www.adc.com/in
111
•
401326IN
Plenum metallic 2-inch inner diameter flexible tubing is available for use in under floor applications
where the exact layout of drop locations has not yet been defined, or where frequent changes in
equipment location are expected. In future growth applications, the flexible tubing can be installed up
front, and coiled under the floor until the exact configuration of equipment is established. The flexible
tubing can then be routed to the drop location and fed through the flooring to the final location.
Index
06/10
•
401326IN
FGS-ACC063...................................................62
FGS-ASRI-5F...............................................32, 40
FGS-ASRI-10F.............................................32, 40
FGS-ASRI-15F.............................................32, 40
FGS-BTBL-C.....................................................66
FGS-BTBS-C.....................................................66
FGS-CD4E-A....................................................30
FGS-CD4E-B.....................................................38
FGS-CD9E-A....................................................30
FGS-CD9E-B.....................................................38
FGS-CDSA-AB............................................30, 38
FGS-CH4E-A....................................................30
FGS-CH4E-B.....................................................38
FGS-CH9E-A....................................................30
FGS-CH9E-B.....................................................38
FGS-CHRT-A.....................................................30
FGS-CHRT-B.....................................................38
FGS-CHXP-A....................................................30
FGS-CHXP-B....................................................38
FGS-CLIP-C......................................................62
FGS-CLIP-D......................................................63
FGS-CLIP-E.......................................................63
FGS-CU4E-A....................................................30
FGS-CU4E-B.....................................................38
FGS-CU9E-A....................................................30
FGS-CU9E-B.....................................................38
FGS-DHCP.....................................26, 34, 42, 50
FGS-DHHC...........................................34, 42, 50
FGS-HAEJ-C.....................................................67
FGS-HASB-1/2-36............................................74
FGS-HASB-1/2-48............................................74
FGS-HASB-5/8-36............................................74
FGS-HASB-5/8-48............................................74
FGS-HASK-C....................................................67
FGS-HCBL-12...................................................68
FGS-HCBL-15...................................................68
FGS-HDCB-C....................................................66
FGS-HDGR.......................................................74
FGS-HDLB-3.....................................................68
FGS-HDSI-AB.............................................32, 40
FGS-HDSI-F/C...................................................48
FGS-HDSI-F/D...................................................48
FGS-HETP-F-XX................................................69
FGS-HETP-H-5/8...............................................70
FGS-HETR-5/8-A...............................................68
FGS-HETR-F-XX................................................69
FGS-HETR-XX...................................................68
FGS-HFCK-1/2..................................................74
FGS-HFCK-5/8..................................................74
FGS-HFRR-10...................................................72
FGS-HHEC-10..................................................72
FGS-HHGK.......................................................72
FGS-HIFC-A......................................................72
FGS-HIFC-B......................................................72
www.adc.com/in
FGS-HIFC-F......................................................72
FGS-HKFM-XX.................................................74
FGS-HKW2-E...................................................63
FGS-HKWZ-E....................................................63
FGS-HLBK........................................................68
FGS-HLDR-A....................................................74
FGS-HLDR-XX..................................................74
FGS-HLR2-C.....................................................66
FGS-HMEC-A...................................................30
FGS-HMEC-B...................................................38
FGS-HMEC-C...................................................20
FGS-HMEC-E....................................................63
FGS-HMEC-F....................................................46
FGS-HMEC-G...................................................24
FGS-HMEC-H...................................................54
FGS-HNLR-AB..................................................68
FGS-HNLR-F.....................................................69
FGS-HNTP-F-XX................................................69
FGS-HNTP-H-5/8..............................................70
FGS-HNTR-5/8-A..............................................68
FGS-HNTR-F-XX...............................................69
FGS-HNTR-XX..................................................68
FGS-HNTS-F-XX................................................69
FGS-HNTS-F-XX-LP...........................................69
FGS-HNTS-XX..................................................68
FGS-HNTS-XX-LP..............................................68
FGS-HOMX-16MM..........................................68
FGS-HRJA-A/B/F...............................................72
FGS-HSHC-10..................................................21
FGS-HTHR-1/2-12............................................74
FGS-HTHR-1/2-30............................................74
FGS-HTHR-1/2-72............................................74
FGS-HTHR-5/8-12............................................74
FGS-HTHR-5/8-30............................................74
FGS-HTHR-5/8-72............................................74
FGS-HTHR-XX-NN............................................74
FGS-HTR2-1/2..................................................67
FGS-HTR2-2-5/8...............................................67
FGS-HTR2-5/8..................................................67
FGS-HTUB-F-XX...............................................69
FGS-HTUB-XX..................................................68
FGS-HUFB-A....................................................68
FGS-HUFB-C....................................................66
FGS-HWMB-C..................................................62
FGS-HWMB-D..................................................63
FGS-ISLAND3-F................................................48
FGS-ISLAND-F..................................................48
FGS-ISLAND-F-513...........................................48
FGS-ISLAND-H/F...............................................55
FGS-JUNC-G....................................................27
FGS-KDH2-C....................................................21
FGS-KQKB.......................................................72
FGS-KT03-A...............................................32, 40
FGS-KT03-A1.............................................32, 40
113
Index
F
401326IN
•
06/10
Index
Index
FGS-KT03-A1-10F......................................32, 40
FGS-KT03-A1-15F......................................32, 40
FGS-KT03-A4-5F........................................32, 40
FGS-KT03-A4-10F......................................32, 40
FGS-KT03-A4-15F......................................32, 40
FGS-KT03-A10F.........................................32, 40
FGS-KT03-A15F.........................................32, 40
FGS-KT03-B.....................................................48
FGS-KT03-B-10F..............................................48
FGS-KT03-B-15F..............................................48
FGS-KT03-C...............................................21, 59
FGS-KT03-C-10F........................................21, 59
FGS-KT03-C-15F........................................21, 59
FGS-KT03-G-5F................................................24
FGS-KT07-A4-5F........................................32, 40
FGS-KT07-A4-10F......................................32, 40
FGS-KT07-A4-15F......................................32, 40
FGS-KT09........................................................72
FGS-KTW1-C...................................................62
FGS-KTW1-CA.................................................62
FGS-KTW1-E....................................................62
FGS-KTW2-D...................................................63
FGS-KTW2-E....................................................63
FGS-KTW4-C...................................................62
FGS-KTW4-E....................................................62
FGS-MCDS-AB.................................................32
FGS-MCDS-AB**.............................................40
FGS-MCDS-EX-AB......................................32, 40
FGS-MD4A-C...................................................20
FGS-MD4E-A...................................................30
FGS-MD4E-B....................................................38
FGS-MD4E-F....................................................46
FGS-MD4E-H...................................................54
FGS-MD9A-C...................................................20
FGS-MD9E-A...................................................30
FGS-MD9E-B....................................................38
FGS-MD9E-F....................................................46
FGS-MD9E-G...................................................24
FGS-MDRT-F.....................................................48
FGS-MDSA-AB...........................................30, 38
FGS-MDSA-AC.................................................20
FGS-MDSA-F2B................................................46
FGS-MDSA-FB............................................38, 46
FGS-MDSA-FB-L...............................................46
FGS-MDSA-FB-R...............................................46
FGS-MDSA-GA................................................24
FGS-MDSA-GB.................................................24
FGS-MDSA-HF.................................................54
FGS-MDSP-2B..................................................40
FGS-MDSP-2B-IMP...........................................40
FGS-MDSP-A....................................................32
FGS-MDSP-A/I..................................................32
FGS-MDSP-B....................................................40
FGS-MDSP-B/I..................................................40
FGS-MDSP-EX-A..............................................32
FGS-MDSP-EX-B...............................................40
www.adc.com/in
FGS-MDSP-F....................................................48
FGS-MDSP-F/I...................................................48
FGS-MDSP-F-VS...............................................46
FGS-MDSP-G...................................................24
FGS-MEX1-C-5F.........................................21, 59
FGS-MEX1-C-10F.......................................21, 59
FGS-MEX1-C-15F.......................................21, 59
FGS-MEXC-E-A................................................58
FGS-MEXC-E-A/B/F...........................................58
FGS-MEXC-E-B.................................................58
FGS-MEXC-E-F.................................................58
FGS-MEXP-A/B/F..............................................59
FGS-MEXP-E-A/B/F...........................................58
FGS-MEXP-LP-A/B/F..........................................59
FGS-MEXP-LP-G...............................................24
FGS-MFAW-A..................................................35
FGS-MFAW-B...................................................43
FGS-MFAW-F...................................................51
FGS-MFAW-H..................................................56
FGS-MFIN-10...................................................72
FGS-MFTY-XF...................................................72
FGS-MH4A-C...................................................20
FGS-MH4E-A...................................................30
FGS-MH4E-B....................................................38
FGS-MH4E-F....................................................46
FGS-MH4E-G...................................................24
FGS-MH4E-H...................................................54
FGS-MH4E-H-VS..............................................70
FGS-MH9A-C...................................................20
FGS-MH9A-C-45/2...........................................20
FGS-MH9E-A...................................................30
FGS-MH9E-B....................................................38
FGS-MH9E-F....................................................46
FGS-MH9E-F-VS...............................................46
FGS-MH9E-G...................................................24
FGS-MHIS-A.........................................30, 38, 46
FGS-MHIS-A/H.................................................54
FGS-MHIS-B.........................................30, 38, 46
FGS-MHIS-B/H..................................................54
FGS-MHIS-F.........................................30, 38, 46
FGS-MHIS-F/H..................................................54
FGS-MHIS-JIG-A/B/F.............................30, 38, 46
FGS-MHRT-A....................................................30
FGS-MHRT-B....................................................38
FGS-MHRT-F.....................................................46
FGS-MHRT-F/B..................................................46
FGS-MHRT-F/B-VS............................................46
FGS-MHRT-F-VS...............................................46
FGS-MHRT-G....................................................24
FGS-MHRT-H....................................................54
FGS-MHRT-H/F.................................................54
FGS-MHRT-H/F-VS............................................70
FGS-MHTA-C...................................................20
FGS-MHXP-A...................................................30
FGS-MHXP-B....................................................38
FGS-MHXP-B/F.................................................46
114
06/10
•
401326IN
FGS-MHXP-B/F-VS............................................46
FGS-MHXP-C...................................................20
FGS-MHXP-F....................................................46
FGS-MHXP-F/H.................................................54
FGS-MHXP-F/H-VS...........................................70
FGS-MHXP-F-VS...............................................46
FGS-MHXP-G...................................................24
FGS-MHXP-H...................................................54
FGS-MHXP-H-VS..............................................70
FGS-MIDY-XF...................................................72
FGS-MISY-XF....................................................72
FGS-MJWR-A.............................................32, 40
FGS-MJWR-C...................................................22
FGS-MJWR-D...................................................63
FGS-MKIT........................................................72
FGS-MKIT-ABF..................................................72
FGS-MLDY-XF..................................................72
FGS-MSDS-C....................................................21
FGS-MSHA-C...................................................22
FGS-MSHC-C...................................................62
FGS-MSHC-D...................................................63
FGS-MSHS-A....................................................34
FGS-MSHS-B....................................................42
FGS-MSHS-C....................................................62
FGS-MSHS-CA.................................................62
FGS-MSHS-D....................................................63
FGS-MSHS-F....................................................50
FGS-MSHS-G...................................................26
FGS-MSHS-H....................................................56
FGS-MSHS-STOR-B...........................................42
FGS-MSHS-STOR-F...........................................50
FGS-MSNC-A...................................................34
FGS-MSNC-B/G..........................................26, 42
FGS-MSNC-F....................................................50
FGS-MSSC-A....................................................34
FGS-MSSC-B/G..........................................26, 42
FGS-MSSC-F....................................................50
FGS-MSTOR-A/B/F............................................72
FGS-MTRM-2B.................................................40
FGS-MTRM-2B-IMP..........................................40
FGS-MTRM-A.............................................32, 40
FGS-MTRM-B...................................................48
FGS-MTRM-C.............................................21, 59
FGS-MTRM-E...................................................63
FGS-MTRM-F...................................................48
FGS-MTRM-G..................................................24
FGS-MTRM-H...................................................55
FGS-MU4A-C...................................................20
FGS-MU4E-A...................................................30
FGS-MU4E-B....................................................38
FGS-MU4E-F....................................................46
FGS-MU4E-G...................................................24
FGS-MU4E-H...................................................54
FGS-MU9A-C...................................................20
FGS-MU9E-A...................................................30
FGS-MU9E-B....................................................38
www.adc.com/in
FGS-MVAR-A.............................................30, 34
FGS-MVAR-B........................................38, 42, 46
FGS-MVAR-F....................................................50
FGSO-ACC063.................................................62
FGSO-ASRI-5F............................................32, 40
FGSO-ASRI-10F..........................................32, 40
FGSO-ASRI-15F..........................................32, 40
FGSO-DHHC........................................34, 42, 50
FGSO-HMEC-C................................................20
FGSO-HMEC-H................................................54
FGSO-ISLAND3-F..............................................48
FGSO-ISLAND-F................................................48
FGSO-ISLAND-F-513........................................48
FGSO-ISLAND-H/F............................................55
FGSO-KDH2-C.................................................21
FGSO-KT03-A............................................32, 40
FGSO-KT03-A1..........................................32, 40
FGSO-KT03-A1-10F...................................32, 40
FGSO-KT03-A1-15F...................................32, 40
FGSO-KT03-A4-5F.....................................32, 40
FGSO-KT03-A4-10F...................................32, 40
FGSO-KT03-A4-15F...................................32, 40
FGSO-KT03-A10F.......................................32, 40
FGSO-KT03-A15F.......................................32, 40
FGSO-KT03-B...................................................48
FGSO-KT03-B-10F............................................48
FGSO-KT03-B-15F............................................48
FGSO-KT03-C............................................21, 59
FGSO-KT03-C-10F.....................................21, 59
FGSO-KT03-C-15F.....................................21, 59
FGSO-KT07-A4-5F.....................................32, 40
FGSO-KT07-A4-10F...................................32, 40
FGSO-KT07-A4-15F...................................32, 40
FGSO-KTW1-C.................................................62
FGSO-KTW1-CA..............................................62
FGSO-KTW1-E.................................................62
FGSO-KTW2-D.................................................63
FGSO-KTW2-E.................................................63
FGSO-KTW4-C.................................................62
FGSO-KTW4-E.................................................62
FGSO-MCDS-AB..............................................32
FGSO-MCDS-AB**..........................................40
FGSO-MCDS-EX-AB...................................32, 40
FGSO-MD4A-C................................................20
FGSO-MD4E-A.................................................30
FGSO-MD4E-B.................................................38
FGSO-MD4E-F..................................................46
FGSO-MD4E-H.................................................54
FGSO-MD9A-C................................................20
FGSO-MD9E-A.................................................30
FGSO-MD9E-B.................................................38
FGSO-MD9E-F..................................................46
FGSO-MDRT-F..................................................48
FGSO-MDSA-AB........................................30, 38
FGSO-MDSA-AC..............................................20
FGSO-MDSA-F2B.............................................46
115
Index
Index
401326IN
•
06/10
Index
Index
FGSO-MDSA-FB.........................................38, 46
FGSO-MDSA-FB-R............................................46
FGSO-MDSA-HF...............................................54
FGSO-MDSP-2B...............................................40
FGSO-MDSP-2B-IMP........................................40
FGSO-MDSP-A.................................................32
FGSO-MDSP-A/I...............................................32
FGSO-MDSP-B.................................................40
FGSO-MDSP-B/I................................................40
FGSO-MDSP-C.................................................21
FGSO-MDSP-EX-A............................................32
FGSO-MDSP-EX-B............................................40
FGSO-MDSP-F..................................................48
FGSO-MDSP-F/I................................................48
FGSO-MEX1-C-5F......................................21, 59
FGSO-MEX1-C-10F....................................21, 59
FGSO-MEX1-C-15F....................................21, 59
FGSO-MEXC-E-A..............................................58
FGSO-MEXC-E-A/B/F........................................58
FGSO-MEXC-E-B..............................................58
FGSO-MEXC-E-F..............................................58
FGSO-MEXP-A/B/F............................................59
FGSO-MEXP-E-A/B/F.........................................58
FGSO-MEXP-LP-A/B/F.......................................59
FGSO-MFAW-A................................................35
FGSO-MFAW-B................................................43
FGSO-MFAW-F.................................................51
FGSO-MFAW-H................................................56
FGSO-MFTY-XF................................................72
FGSO-MH4A-C................................................20
FGSO-MH4E-A.................................................30
FGSO-MH4E-B.................................................38
FGSO-MH4E-F..................................................46
FGSO-MH4E-H.................................................54
FGSO-MH9A-C................................................20
FGSO-MH9A-C-45/2........................................20
FGSO-MH9E-A.................................................30
FGSO-MH9E-B.................................................38
FGSO-MH9E-F..................................................46
FGSO-MHIS-A......................................30, 38, 46
FGSO-MHIS-A/H...............................................54
FGSO-MHIS-B......................................30, 38, 46
FGSO-MHIS-B/H...............................................54
FGSO-MHIS-F.......................................30, 38, 46
FGSO-MHIS-F/H...............................................54
FGSO-MHRT-A.................................................30
FGSO-MHRT-B..................................................38
FGSO-MHRT-F..................................................46
FGSO-MHRT-F/B...............................................46
FGSO-MHRT-H.................................................54
FGSO-MHRT-H/F...............................................54
FGSO-MHTA-C.................................................20
FGSO-MHXP-A.................................................30
FGSO-MHXP-B.................................................38
FGSO-MHXP-B/F..............................................46
FGSO-MHXP-C.................................................20
www.adc.com/in
FGSO-MHXP-F.................................................46
FGSO-MHXP-F/H..............................................54
FGSO-MHXP-H.................................................54
FGSO-MIDY-XF.................................................72
FGSO-MISY-XF.................................................72
FGSO-MJWR-A..........................................32, 40
FGSO-MJWR-C................................................22
FGSO-MJWR-D................................................63
FGSO-MLDY-XF................................................72
FGSO-MSDS-C.................................................21
FGSO-MSHA-C................................................22
FGSO-MSHC-C................................................62
FGSO-MSHC-D................................................63
FGSO-MSHS-A.................................................34
FGSO-MSHS-B.................................................42
FGSO-MSHS-C.................................................62
FGSO-MSHS-CA...............................................62
FGSO-MSHS-D.................................................63
FGSO-MSHS-F..................................................50
FGSO-MSHS-H.................................................56
FGSO-MSHS-STOR-B........................................42
FGSO-MSHS-STOR-F........................................50
FGSO-MSNC-A................................................34
FGSO-MSNC-B/G.............................................42
FGSO-MSNC-F.................................................50
FGSO-MSSC-A.................................................34
FGSO-MSSC-B/G..............................................42
FGSO-MSSC-F..................................................50
FGSO-MTRM-2B..............................................40
FGSO-MTRM-2B-IMP.......................................40
FGSO-MTRM-A..........................................32, 40
FGSO-MTRM-B................................................48
FGSO-MTRM-C..........................................21, 59
FGSO-MTRM-E.................................................63
FGSO-MTRM-F.................................................48
FGSO-MU4A-C................................................20
FGSO-MU4E-A.................................................30
FGSO-MU4E-B.................................................38
FGSO-MU4E-F..................................................46
FGSO-MU4E-H.................................................54
FGSO-MU9A-C................................................20
FGSO-MU9E-A.................................................30
FGSO-MU9E-B.................................................38
FGSO-MVAR-A...........................................30, 34
FGSO-MVAR-B.....................................38, 42, 46
FGSO-MVAR-F.................................................50
FGSO-SD4E-A..................................................30
FGSO-SD4E-B...................................................38
FGSO-SD4E-F...................................................46
FGSO-SD9E-A..................................................30
FGSO-SD9E-B...................................................38
FGSO-SD9E-F...................................................46
FGSO-SDSA-AB..........................................30, 38
FGSO-SDSA-F2B...............................................46
FGSO-SDSA-FB...........................................38, 46
FGSO-SDSP-F...................................................48
116
06/10
•
401326IN
FGSO-SH4E-A..................................................30
FGSO-SH4E-B...................................................38
FGSO-SH4E-F...................................................46
FGSO-SH9E-A..................................................30
FGSO-SH9E-B...................................................38
FGSO-SH9E-F...................................................46
FGSO-SHRT-A...................................................30
FGSO-SHRT-B...................................................38
FGSO-SHRT-F...................................................46
FGSO-SHRT-F/B................................................46
FGSO-SHXP-A..................................................30
FGSO-SHXP-B..................................................38
FGSO-SHXP-B/F................................................46
FGSO-SHXP-F...................................................46
FGSO-SU4E-A..................................................30
FGSO-SU4E-B...................................................38
FGSO-SU4E-F...................................................46
FGSO-SU9E-A..................................................30
FGSO-SU9E-B...................................................38
FGS-SD4E-A.....................................................30
FGS-SD4E-B.....................................................38
FGS-SD4E-F......................................................46
FGS-SD9E-A.....................................................30
FGS-SD9E-B.....................................................38
FGS-SD9E-F......................................................46
FGS-SDSA-AB............................................30, 38
FGS-SDSA-F2B.................................................46
FGS-SDSA-FB.............................................38, 46
FGS-SDSP-F......................................................48
FGS-SH4E-A.....................................................30
FGS-SH4E-B.....................................................38
FGS-SH4E-F......................................................46
FGS-SH9E-A.....................................................30
FGS-SH9E-B.....................................................38
FGS-SH9E-F......................................................46
FGS-SHRT-A.....................................................30
FGS-SHRT-B......................................................38
FGS-SHRT-F......................................................46
FGS-SHRT-F/B...................................................46
FGS-SHXP-A.....................................................30
FGS-SHXP-B.....................................................38
FGS-SHXP-B/F..................................................46
FGS-SHXP-F.....................................................46
FGS-SU4E-A.....................................................30
FGS-SU4E-B.....................................................38
FGS-SU4E-F......................................................46
FGS-SU9E-A.....................................................30
FGS-SU9E-B.....................................................38
FGS-VDSA-FB-R................................................46
www.adc.com/in
P
PFGC-PD4E-B.................................................106
PFGC-PD4E-C................................................104
PFGC-PD4E-F.................................................108
PFGC-PDNE-B................................................106
PFGC-PDNE-C................................................104
PFGC-PDNE-F.................................................108
PFGC-PDSA-B/F..............................................106
PFGC-PDSA-C/B.............................................104
PFGC-PDSA-C/F.............................................104
PFGC-PH4E-B.................................................106
PFGC-PH4E-C................................................104
PFGC-PH4E-F.................................................108
PFGC-PH9E-B.................................................106
PFGC-PH9E-C................................................104
PFGC-PH9E-F.................................................108
PFGC-PHRT-B.................................................106
PFGC-PHRT-C.................................................104
PFGC-PHRT-F..................................................108
PFGC-PHRT-F/B...............................................108
PFGC-PHXP-B.................................................106
PFGC-PHXP-C................................................104
PFGC-PHXP-F.................................................108
PFGC-PSHS-B.................................................106
PFGC-PSHS-C.................................................104
PFGC-PSHS-F.................................................108
PFGC-PU4E-B.................................................106
PFGC-PU4E-C................................................104
PFGC-PU4E-F.................................................108
PFGC-PUPE-B.................................................106
PFGC-PUPE-C.................................................104
PFGC-PUPE-F.................................................108
PFGF-DSPT-C/B/F............................................110
PFGF-EADSPT-C/B/F........................................110
PFGF-EAESPT-C/B/F.........................................110
PFGF-EALSPT-C/B/F.........................................110
PFGF-EASSPT-C/B...........................................110
PFGF-ESPT-C/B/F.............................................110
PFGF-HEXT.....................................................111
PFGF-HFIN......................................................111
PFGF-HMST....................................................111
PFGF-HSPL.....................................................111
PFGF-KT03-B..................................................111
PFGF-KT03-C.................................................111
PFGF-LSPT-C/B/F.............................................110
PFGF-MIDY-XF................................................111
PFGF-PD4E-B..................................................106
PFGF-PD4E-C.................................................104
PFGF-PD4E-F..................................................108
PFGF-PDNE-B.................................................106
PFGF-PDNE-C.................................................104
PFGF-PDNE-F..................................................108
PFGF-PDSA-B/F...............................................106
PFGF-PDSA-C/B..............................................104
PFGF-PDSA-C/F..............................................104
117
Index
Index
401326IN
•
PFGF-PFPT-B...................................................106
PFGF-PFPT-C...................................................104
PFGF-PFPT-F...................................................108
PFGF-PH4E-B..................................................106
PFGF-PH4E-C.................................................104
PFGF-PH4E-F..................................................108
PFGF-PH9E-B..................................................106
PFGF-PH9E-C.................................................104
PFGF-PH9E-F..................................................108
PFGF-PHRT-B..................................................106
PFGF-PHRT-C..................................................104
PFGF-PHRT-F..................................................108
PFGF-PHRT-F/B...............................................108
PFGF-PHXP-B.................................................106
PFGF-PHXP-C.................................................104
PFGF-PHXP-F..................................................108
PFGF-PJWR-B.................................................106
PFGF-PJWR-C.................................................104
PFGF-PJWR-F..................................................108
PFGF-PMEC-B................................................106
PFGF-PMEC-C................................................104
PFGF-PMEC-F.................................................108
PFGF-PPSC-B..................................................106
PFGF-PSEE-B/C...............................................102
PFGF-PSEE-BLK...............................................102
PFGF-PSHS-B..................................................106
PFGF-PSHS-C.................................................104
PFGF-PSHS-F..................................................108
PFGF-PSHS-KT................................................102
PFGF-PSHS-KT-F.............................................102
PFGF-PTRM-B.................................................106
PFGF-PTRM-C................................................104
PFGF-PTRM-F.................................................108
PFGF-PU4E-B..................................................106
PFGF-PU4E-C.................................................104
PFGF-PU4E-F..................................................108
PFGF-PUPE-B..................................................106
PFGF-PUPE-C.................................................104
PFGF-PUPE-F..................................................108
PFGF-SSPT-C/B...............................................110
06/10
Index
Index
www.adc.com/in
118
FiberGuide Fibre Management Systems
www.adc.com/in
Corporate Office & Factory: P B No. 5812, 10 ‘C’ II Phase, Peenya, BANGALORE - 560 058. India
Ph: +91 80 2839 6101 / 6291, Fax +91 80 2372 2753 Toll Free: 1800 425 8232
For a listing of ADC India's sales office locations, please refer to our website
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products orfeatures
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
401326IN 06/10
Revision 1
© 2010 ADC Telecommunications, Inc. All Rights Reserved

2nd Edition FiberGuide® Fibre Management Systems

Transcription

Similar documents

Eaton® Char-Lynn® Spool Valve Hydraulic Motors

Premium Natural Stones