Conveyor Belt Lacing Systems

Belt Maintenance
Product Catalogue
Belt Lacing Systems
for the Laundry Industry
MATO GmbH & Co. KG · Germany · [email protected] · www.mato.de
Branch Herten: Hohewardstraße 329 · D-45699 Herten · Phone: +49 (0) 2366-9321-0 · Fax: +49 (0) 2366-9321-10
Head Office: Benzstraße 16 –24 · D-63165 Mühlheim a.M. · Phone: +49 (0) 6108-906-0 · Fax: +49 (0) 6108-906-120
since
1906
Table of Contents
Belt Lacing Systems for the Laundry Industry
Page
Verbinderauswahl Drahtsysteme M und R
Wie gehen Sie vor?
Was brauchen Sie?
Gurtdicke
A us wahltabellen unte n , tref f en mehrere Typen zu, dann wähl en Sie:
- kleinste D ra hta bme ssung , wenn W unsch na ch f lachem Auf trag = ruhige r Lauf .
Tromm eldurc hm es se r (D m in )
- gr ößte Dra htabme ss ung , we nn h oher Verschlei ß.
- P1 (mit Tex tilpatc h) , wenn Ab deckung g ewünscht.
Verb inde r- un d Verbind estab auswahlt abelle f ür System e M60-son der, R20 u nd R70
Mi n.
Trom mel
Draht
Abmessu ngen
D urchm.
25m m
1"
mm
T eil ung
i nch
Verbindest ab
mm
0,9x0,5
.035x .020
30m m
1 1/ 8"
0,9x0,5
.035x .020
75mm 3"
0,9x0,7
.035x .028
2,54
1/ 32"
1/16"
0, 8mm
1,6mm
1, 5
(MK15)
2,54
1, 5
(MK15)
2,54
1, 8
(MK18)
 1,0
 . 040
3, 175
75m m
3"
 1,0
 . 040
3, 175
5/ 64"
3/32"
7/64"
1/8"
9/64 "
5/32"
2, 0mm
2, 4mm
2,8mm
3, 2mm
3,6mm
4,0mm
M61. 2LS W-P1
M61. 2LNW-P 1
M61. 2LS W
M 61.2LNW
M63L P
3/64 "
5/64"
1,0mm
2,0mm
2, 0
(MK18)
(MK20)
4,0mm
R22NP
(MK20)
1, 8
2, 0
5/32"
1/ 8"
3, 0mm
R22S P
R72S P
(MK18)
1, 8
50m m
2"
Gurtdic kenbere ic h
D urchm .
m m ( Typ)
R72NP
R23S P
R73S P
R23NP
R73NP
We ite re E rläuter unge n:
M = Pro fi ld raht
R = R un dd rah t
M6 1.2L = Fla chd rah t
Pa pie rgefa ss t: Verbi nder i n Papi er geh alt en
Quer dr aht: Verb inder auf Qu erdraht geschweiß t
P1 = Verb in der m it vo rin sta ll ierte m Te xtilp atch
 Mate rialauswa hl e ntsp rech end Ih ren
 Ve rbinde sta bauswahl s ieh e Sei te 14
An ford erun ge n sie he Au swa hl ta be lle u nten .
A
bdeckung
Schutzdurch
beständigkeit
K
orrosions-
beständigkeit
Verschleiß-
widerstand
M
agnetismus
Säure-
K
urzform
stark
magn etisch
G
(Lebensdauer)
Au swah ltabelle Verbin dermaterial
Werksto ff
Stahl v erzinkt
Verf ügb are
Systeme
n ei n
R 20
gut
n ei n
R 20, R7 0, M6 0
Stahl r os tfre i, 1.44 04
SS
schwach
magn etisch
sehr gut
sehr g ut
ausgezei chn et
n ei n
R 20, R7 0, M6 0
Stahl r os tfre i, 1.44 04
mit
Te xtilpa tch
SS P1
schwach
magn etisch
ausgezeichnet
sehr g ut
ausgezei chn et
ja
M6 0L-P1
Stahl r os tfre i, 1.40 16
sehr gut
magn etisch
S
ungenü gen d
sehr gut
g ut
gut
Selection Charts for Wire Systems M and R for the Laundry Industry
3
Low Profile Wire Fastener M61.2LSW, Cut to Length
4-5
Low Profile Wire Fastener M61.2LNW, Cut to Length
6-7
Rectangular Wire Fastener M63LP, Cut to Length
8
Round Wire Fasteners R20 and R70
9
Fastener Series M60L-P (MATOPATCH)
10-12
Installation Units for MATOPATCH
13
Selection Chart of Connecting Pins for the Laundry Industry
14
Nylorostfrei
Nylonummantelter
Edelstahldraht
Nylonrundmat erial, glat t
Edelstahldraht, glatt
Nylostahllitze
Nylonummanteltes
Stahldrahts eil
Nylorostfreilitze
Nylonummanteltes
Edelstahls eil
...NY
schwach
magnetisch
sehr gut
sehr gut
ausreichend
ausgezeichnet
aus-
mäßig
aus-
sehr gut
sehr gut
...WSS
gut
gut
gut
ausreichend
gut
sehr gut
ausausgezeichnet gezeichnet
aus-
aus-
gut
aus-
...NCS gezeichnet gezeichnet gezeichnet
ausgezeichnet
ausreichend
schwach
ausmagnetisch gezeichnet
gering
gut
magnetisch
gut
sehr gut
gut
sehr gut
schwach
magnetisch
gut
sehr gut
gut
sehr gut
ausgezeichnet
...WSSN*
...NC
W e c h s e ln d e
G u rt s p a n n u n g ,
s c h m al e G u rt e
S t e if ig k e it
F le xi b il it ä t
M a g n et is m u s
S ä u re b es t ä n d ig ke it
A b kü rz u n g
K o rro s i o n s b es t ä n d ig ke it
stark
magnetisch
aus-
aus-
...NYN
Stahldraht rostfrei
Edelstahldraht, geprägte
Kerben
mäßig
sehr gut
ausausausausnicht
gezeichnet gezeichnet gezeichnet gezeichnet magnetisch
aus-
...NST gezeichnet gezeichnet
...NSS gezeichnet gezeichnet gezeichnet
Nyloschnur
Nylonrundmat erial,
geprägte Kerben
V e rb i n d e rs t a n d z e it
V e rb in d e stab ty p
Nylonummantelter
Federstahldraht
V e rb i n d e s ta b v e rs c h le is s f e s ti g k e it
Bestimmung des Verbindestabtyps
Nylostahl
Connecting Pins for the Laundry Industry
Installation Units and Accessories for the Laundry Industry
Terms & Conditions, General Remarks
Page 1
15-16
18
19-20
Wire Systems M and R for the Laundry Industry
Page 2
Selection Chart
Wire Systems M and R for the Laundry Industry
Fastener Selection for the Laundry Industry
What do you require?
Determine:
 Belt Thickness
 Minimum Pulley Dia (D min )
How do you select?
Selection Charts below , if several types apply, then select :
- Smallest Wire Dimension for a smooth surface, results in less noise
- Biggest Wire Dimension , when dealing with high wear.
- P (with Textile Patch = MATOPATCH) , when cover is required.
Fastener and Connecting Pin Selection Chart for Systems M60-special, R20 and R70
Min.
Wire
Pulley
Dimensions
Dia.
25mm
1"
30mm
1 1/8"
mm
Connecting
inch
0.9x0.5 .035x.020
Pitch
1/32"
1/16"
5/64"
3/32"
7/64"
1/8"
9/64"
5/32"
mm (type)
0.8mm
1.6mm
2.0mm
2.4mm
2.8mm
3.2mm
3.6mm
4.0mm
mm
2.54
1.5
2.54
1.5
(MK15)
75mm3" 0.9x0.7 .035x.028
2.54
1.8
(MK18)
75mm
3"
 1.0
 1.0
 .040
 .040
M61.2LSW-P
(MK15)
0.9x0.5 .035x.020
50mm
2"
Belt Thickness Range
Pin Diameter
1.8
(MK18)
2.0
(MK20)
M61.2LNW-P
M61.2LSW
M61.2LNW
M63LP
3/64"
5/64"
1/8"
5/32"
1.0mm
2.0mm
3.0mm
4.0mm
R22SP
R72SP
3.175
1.8
(MK18)
2.0
(MK20)
R22NP
R72NP
R23SP
R73SP
3.175
R23NP
R73NP
Further Explanations
M = Rectangular Wire
R = Round Wire
M61.2L = Low Profile Rectangular Wire
Carded: Fasteners are positioned in carded paper
Barred : Fasteners are welded on cross wire
P : Fasteners with preinstalled Textile Patch (MATOPATCH)
Material Selection according to your
Selection of Connecting Pins, see page 14
requirements, see Selection Chart below.
Material
Symbol
Magnetic
Abrasion
Resistance
Chemical
Resistance
Rust
Resistance
Protection
through
Covering
Fastener Material Selection Chart
Available
Systems
Galvanised Steel
G
High
Magnetic
Very Good
No
Good
No
R20
Stainless Steel, 430
S
Magnetic
Very Good
Good
Good
No
R20, R70, M60
Stainless Steel, 316
SS
Slightly
Magnetic
Very Good
Very Good
Excellent
No
R20, R70, M60
Stainless Steel, 316
with
Textile Patch
SS-P
Slightly
Magnetic
Excellent
Very Good
Excellent
Yes
M60L-P
Material
MATO helps you choosing the right fastener for your application and offers perfect solutions even
for the most uncommon problems.
Page 3
Low Profile Wire Fastener M61.2LSW, Cut to Length
- Barred Fasteners
- Box Content with Connecting Pin MK15-NYN
- Minimum Pulley Diameter 30 mm
Description
Belt Width
Fasteners
mm
per Strip
- Pitch 2.54 mm
- Belt Thickness 1.6 - 2.4 mm
No. of
Laces
Order No
kg
M61.2LSW, Cut to Length, Stainless Steel
M61.2LSW-SS-025
M61.2LSW-SS-030
M61.2LSW-SS-032
M61.2LSW-SS-035
M61.2LSW-SS-038.5
M61.2LSW-SS-040
M61.2LSW-SS-048
M61.2LSW-SS-048.5
M61.2LSW-SS-050
M61.2LSW-SS-057
M61.2LSW-SS-060
M61.2LSW-SS-063
M61.2LSW-SS-075
25
30
32
35
38,5
40
48
48,5
50
57
60
63
75
7/8
9/10
10/11
11/12
12/13
13/14
16/17
16/17
17/18
20/21
21/22
22/23
27/28
100
100
100
100
100
100
100
100
100
100
100
100
100
42 268 02 50
42 268 03 00
42 268 03 20
42 268 03 50
42 268 03 85
42 268 04 00
42 268 04 80
42 268 04 85
42 268 05 00
42 268 05 70
42 268 06 00
42 268 06 30
42 268 07 50
0,2
M61.2LSW-SS-083
M61.2LSW-SS-088.5
M61.2LSW-SS-090
M61.2LSW-SS-095
M61.2LSW-SS-100
M61.2LSW-SS-110
M61.2LSW-SS-113.5
M61.2LSW-SS-115
M61.2LSW-SS-120
M61.2LSW-SS-140
M61.2LSW-SS-150
M61.2LSW-SS-168
M61.2LSW-SS-180
M61.2LSW-SS-190
83
88,5
90
95
100
110
113,5
115
120
140
150
168
180
190
29/30
31/32
31/32
33/34
35/36
39/40
41/42
41/42
43/44
51/52
55/56
62/63
66/67
70/71
50
50
50
50
50
50
50
50
50
50
50
50
50
50
42 268 08 30
42 268 08 85
42 268 09 00
42 268 09 50
42 268 10 00
42 268 11 00
42 268 11 35
42 268 11 50
42 268 12 00
42 268 14 00
42 268 15 00
42 268 16 80
42 268 18 00
42 268 19 00
0,3
M61.2LSW-SS-200
M61.2LSW-SS-280
M61.2LSW-SS-285
M61.2LSW-SS-292.5
M61.2LSW-SS-300
200
280
285
292,5
300
74/75
107/108
108/109
111/112
115/116
20
20
20
20
20
42 268 20 00
42 268 28 00
42 268 28 50
42 268 29 25
42 268 30 00
0,3
Special Connecting Pins on page 15
Page 4
0,3
0,3
0,3
0,3
0,3
0,4
0,4
0,4
0,5
0,5
Material:
Stainless Steel 316
Wire Dimensions
0.9 x 0.5 mm
0,5
0,6
0,3
0,4
0,4
0,4
0,4
0,5
Solid Nylon NYN
0,5
(notched)
0,5
0,5
0,6
0,6
0,7
0,7
0,5
0,5
0,5
0,5
Low Profile Wire Fastener M61.2LSW, Cut to Length
- Barred Fasteners
- Box Content with Connecting Pin MK15-NYN
- Minimum Pulley Diameter 30 mm
Description
Belt Width
Fasteners
mm
per Strip
- Pitch 2.54 mm
- Belt Thickness 1.6 - 2.4 mm
No. of
Laces
Order No
kg
M61.2LSW, Cut to Length, Chromium Steel
M61.2LSW-S-025
M61.2LSW-S-030
M61.2LSW-S-032
M61.2LSW-S-035
M61.2LSW-S-038.5
M61.2LSW-S-040
M61.2LSW-S-048
M61.2LSW-S-048.5
M61.2LSW-S-050
M61.2LSW-S-057
M61.2LSW-S-060
M61.2LSW-S-063
M61.2LSW-S-075
25
30
32
35
38,5
40
48
48,5
50
57
60
63
75
7/8
9/10
10/11
11/12
12/13
13/14
16/17
16/17
17/18
20/21
21/22
22/23
27/28
100
100
100
100
100
100
100
100
100
100
100
100
100
42 273 02 50
42 273 03 00
42 273 03 20
42 273 03 50
42 273 03 85
42 273 04 00
42 273 04 80
42 273 04 85
42 273 05 00
42 273 05 70
42 273 06 00
42 273 06 30
42 273 07 50
0,2
M61.2LSW-S-083
M61.2LSW-S-088.5
M61.2LSW-S-090
M61.2LSW-S-095
M61.2LSW-S-100
M61.2LSW-S-110
M61.2LSW-S-113.5
M61.2LSW-S-115
M61.2LSW-S-120
M61.2LSW-S-140
M61.2LSW-S-150
M61.2LSW-S-168
M61.2LSW-S-180
M61.2LSW-S-190
83
88,5
90
95
100
110
113,5
115
120
140
150
168
180
190
29/30
31/32
31/32
33/34
35/36
39/40
41/42
41/42
43/44
51/52
55/56
62/63
66/67
70/71
50
50
50
50
50
50
50
50
50
50
50
50
50
50
42 273 08 30
42 273 08 85
42 273 09 00
42 273 09 50
42 273 10 00
42 273 11 00
42 273 11 35
42 273 11 50
42 273 12 00
42 273 14 00
42 273 15 00
42 273 16 80
42 273 18 00
42 273 19 00
0,3
M61.2LSW-S-200
M61.2LSW-S-280
M61.2LSW-S-285
M61.2LSW-S-292.5
M61.2LSW-S-300
200
280
285
292,5
300
74/75
107/108
108/109
111/112
115/116
20
20
20
20
20
42 273 20 00
42 273 28 00
42 273 28 50
42 273 29 25
42 273 30 00
0,3
Special Connecting Pins on page 15
Page 5
0,3
0,3
0,3
0,3
0,3
0,4
0,4
0,4
0,5
0,5
Material: Chromium
Steel 430
Wire Dimensions
0.9 x 0.5 mm
0,5
0,6
0,4
0,4
0,4
0,4
0,4
0,5
Solid Nylon NYN
0,5
(notched)
0,5
0,5
0,6
0,6
0,7
0,7
0,5
0,5
0,5
0,5
Low Profile Wire Fastener M61.2LNW, Cut to Length
- Barred Fasteners
- Box Content with Connecting Pin MK15-NYN
- Minimum Pulley Diameter 30 mm
Description
Belt Width
Fasteners
mm
per Strip
- Pitch 2.54 mm
- Belt Thickness 2.4 - 3.2 mm
No. of
Laces
Order No
kg
M61.2LNW, Cut to Length, Stainless Steel
M61.2LNW-SS-025
M61.2LNW-SS-030
M61.2LNW-SS-032
M61.2LNW-SS-035
M61.2LNW-SS-038.5
M61.2LNW-SS-040
M61.2LNW-SS-048
M61.2LNW-SS-048.5
M61.2LNW-SS-050
M61.2LNW-SS-057
M61.2LNW-SS-060
M61.2LNW-SS-063
M61.2LNW-SS-075
25
30
32
35
38,5
40
48
48,5
50
57
60
63
75
7/8
9/10
10/11
11/12
12/13
13/14
16/17
16/17
17/18
20/21
21/22
22/23
27/28
100
100
100
100
100
100
100
100
100
100
100
100
100
42 269 02 50
42 269 03 00
42 269 03 20
42 269 03 50
42 269 03 85
42 269 04 00
42 269 04 80
42 269 04 85
42 269 05 00
42 269 05 70
42 269 06 00
42 269 06 30
42 269 07 50
0,2
M61.2LNW-SS-083
M61.2LNW-SS-088.5
M61.2LNW-SS-090
M61.2LNW-SS-095
M61.2LNW-SS-100
M61.2LNW-SS-110
M61.2LNW-SS-113.5
M61.2LNW-SS-115
M61.2LNW-SS-120
M61.2LNW-SS-140
M61.2LNW-SS-150
M61.2LNW-SS-168
M61.2LNW-SS-180
M61.2LNW-SS-190
83
88,5
90
95
100
110
113,5
115
120
140
150
168
180
190
29/30
31/32
31/32
33/34
35/36
39/40
41/42
41/42
43/44
51/52
55/56
62/63
66/67
70/71
50
50
50
50
50
50
50
50
50
50
50
50
50
50
42 269 08 30
42 269 08 85
42 269 09 00
42 269 09 50
42 269 10 00
42 269 11 00
42 269 11 35
42 269 11 50
42 269 12 00
42 269 14 00
42 269 15 00
42 269 16 80
42 269 18 00
42 269 19 00
0,4
M61.2LNW-SS-200
M61.2LNW-SS-280
M61.2LNW-SS-285
M61.2LNW-SS-292.5
M61.2LNW-SS-300
200
280
285
292,5
300
74/75
107/108
108/109
111/112
115/116
20
20
20
20
20
42 269 20 00
42 269 28 00
42 269 28 50
42 269 29 25
42 269 30 00
0,3
Special Connecting Pins on page 15
Page 6
0,3
0,3
0,3
0,3
0,3
0,4
0,4
0,4
0,5
0,5
Material:
Stainless Steel 316
Wire Dimensions
0.9 x 0.5 mm
0,5
0,6
0,4
0,4
0,4
0,4
0,4
0,5
Solid Nylon NYN
0,5
(notched)
0,5
0,6
0,6
0,7
0,7
0,7
0,5
0,5
0,5
0,5
Low Profile Wire Fastener M61.2LNW, Cut to Length
- Barred Fasteners
- Box Content with Connecting Pin MK15-NYN
- Minimum Pulley Diameter 30 mm
Description
Belt Width
Fasteners
mm
per Strip
- Pitch 2.54 mm
- Belt Thickness 2.4 - 3.2 mm
No. of
Laces
Order No
kg
M61.2LNW Cut to Length, Chromium Steel
M61.2LNW-S-025
M61.2LNW-S-030
M61.2LNW-S-032
M61.2LNW-S-035
M61.2LNW-S-038.5
M61.2LNW-S-040
M61.2LNW-S-048
M61.2LNW-S-048.5
M61.2LNW-S-050
M61.2LNW-S-057
M61.2LNW-S-060
M61.2LNW-S-063
M61.2LNW-S-075
25
30
32
35
38,5
40
48
48,5
50
57
60
63
75
7/8
9/10
10/11
11/12
12/13
13/14
16/17
16/17
17/18
20/21
21/22
22/23
27/28
100
100
100
100
100
100
100
100
100
100
100
100
100
42 292 02 50
42 292 03 00
42 292 03 20
42 292 03 50
42 292 03 85
42 292 04 00
42 292 04 80
42 292 04 85
42 292 05 00
42 292 05 70
42 292 06 00
42 292 06 30
42 292 07 50
0,2
M61.2LNW-S-083
M61.2LNW-S-088.5
M61.2LNW-S-090
M61.2LNW-S-095
M61.2LNW-S-100
M61.2LNW-S-110
M61.2LNW-S-113.5
M61.2LNW-S-115
M61.2LNW-S-120
M61.2LNW-S-140
M61.2LNW-S-150
M61.2LNW-S-168
M61.2LNW-S-180
M61.2LNW-S-190
83
88,5
90
95
100
110
113,5
115
120
140
150
168
180
190
29/30
31/32
31/32
33/34
35/36
39/40
41/42
41/42
43/44
51/52
55/56
62/63
66/67
70/71
50
50
50
50
50
50
50
50
50
50
50
50
50
50
42 292 08 30
42 292 08 85
42 292 09 00
42 292 09 50
42 292 10 00
42 292 11 00
42 292 11 35
42 292 11 50
42 292 12 00
42 292 14 00
42 292 15 00
42 292 16 80
42 292 18 00
42 292 19 00
0,4
M61.2LNW-S-200
M61.2LNW-S-280
M61.2LNW-S-285
M61.2LNW-S-292.5
M61.2LNW-S-300
200
280
285
292,5
300
74/75
107/108
108/109
111/112
115/116
20
20
20
20
20
42 292 20 00
42 292 28 00
42 292 28 50
42 292 29 25
42 292 30 00
0,3
Special Connecting Pins on page 15
Page 7
0,3
0,3
0,3
0,3
0,3
0,4
0,4
0,4
0,5
0,5
Material: Chromium
Steel 430
Wire Dimensions
0.9 x 0.5 mm
0,5
0,6
0,4
0,4
0,4
0,4
0,4
0,5
Solid Nylon NYN
0,5
(notched)
0,5
0,6
0,6
0,7
0,7
0,7
0,5
0,5
0,5
0,5
Rectangular Wire Fastener M63LP, Cut to Length
- Barred Fasteners
- Box Content with Connecting Pin MK15-NYN
- Minimum Pulley Diameter 75 mm
Description
Belt Width
Fasteners
mm
per Strip
- Pitch 2.54 mm
- Belt Thickness 3.2 - 4.0 mm
No. of
Laces
Order No
kg
M63LP Cut to Length, Stainless Steel
M63LP-SS-100
M63LP-SS-110
M63LP-SS-113.5
M63LP-SS-115
M63LP-SS-120
M63LP-SS-140
M63LP-SS-150
M63LP-SS-168
M63LP-SS-180
M63LP-SS-190
M63LP-SS-200
M63LP-SS-280
100
110
113,5
115
120
140
150
168
180
190
35/36
39/40
41/42
41/42
43/44
51/52
55/56
62/63
66/67
70/71
50
50
50
50
50
50
50
50
50
50
42 663 10 00
42 663 11 00
42 663 11 35
42 663 11 50
42 663 12 00
42 663 14 00
42 663 15 00
42 663 16 80
42 663 18 00
42 663 19 00
0,5
200
280
74/75
107/108
20
20
42 663 20 00
42 663 28 00
0,4
0,5
0,6
0,6
0,6
0,7
0,7
0,8
0,8
0,8
Material:
Stainless Steel 316
Wire Dimensions
0.9 x 0.7 mm
0,6
M63LP Cut to Length, Chromium Steel
M63LP-S-100
M63LP-S-110
M63LP-S-113.5
M63LP-S-115
M63LP-S-120
M63LP-S-140
M63LP-S-150
M63LP-S-168
M63LP-S-180
M63LP-S-190
M63LP-S-200
M63LP-S-280
100
110
113,5
115
120
140
150
168
180
190
35/36
39/40
41/42
41/42
43/44
51/52
55/56
62/63
66/67
70/71
50
50
50
50
50
50
50
50
50
50
42 296 10 00
42 296 11 00
42 296 11 35
42 296 11 50
42 296 12 00
42 296 14 00
42 296 15 00
42 296 16 80
42 296 18 00
42 296 19 00
0,5
200
280
74/75
107/108
20
20
42 296 20 00
42 296 28 00
0,4
0,5
0,6
0,6
0,6
0,7
0,7
0,8
0,8
0,8
Material: Chromium
Steel 430
Wire Dimensions
0.9 x 0.7 mm
0,6
Solid Nylon NYN
(notched)
Connecting Pins MK18-NYN, Cut to Length upon request
Special Connecting Pins on page 15
Page 8
Round Wire Fasteners R20 and R70
- Pitch 3.175 mm
- R20 = Carded Fastener
- R70 = Barred Fastener
Description
Belt Thickness
- Wire Diameter 1.0mm
- Box without Connecting Pins
Min. Pulley
Diameter-Ø
Strips/
Box
Order No
kg
R20 Standard
Stainless Steel, Strip Length 300 mm
R22SP-SS-300-12
R22NP-SS-300-12
2.0 - 3.0 mm
3.0 - 4.0 mm
50 mm
50 mm
12
12
42 104 22 21
42 104 22 22
0,3
R23SP-SS-300-12
R23NP-SS-300-12
2.0 - 3.0 mm
3.0 - 4.0 mm
75 mm
75 mm
12
12
42 104 22 31
42 104 22 32
0,4
0,3
0,4
Stainless Steel 316
Chromium Steel, Strip Length 300 mm
R22SP-S-300-12
R22NP-S-300-12
2.0 - 3.0 mm
3.0 - 4.0 mm
50 mm
50 mm
12
12
42 103 22 21
42 103 22 22
0,3
R23SP-S-300-12
R23NP-S-300-12
2.0 - 3.0 mm
3.0 - 4.0 mm
75 mm
75 mm
12
12
42 103 22 31
42 103 22 32
0,4
0,3
0,4
Chromium Steel 430
Galvanised Steel, Strip Length 300 mm
R22SP-G-300-12
R22NP-G-300-12
2.0 - 3.0 mm
3.0 - 4.0 mm
50 mm
50 mm
12
12
42 101 22 21
42 101 22 22
0,3
R23SP-G-300-12
R23NP-G-300-12
2.0 - 3.0 mm
3.0 - 4.0 mm
75 mm
75 mm
12
12
42 101 22 31
42 101 22 32
0,4
0,3
0,4
Galvanised Steel
R70 Standard
Stainless Steel, Strip Length 300 mm
R72SP-SS-300-12
R72NP-SS-300-12
2.0 - 3.0 mm
3.0 - 4.0 mm
50 mm
50 mm
12
12
42 704 17 21
42 704 17 22
0,3
R73SP-SS-300-12
R73NP-SS-300-12
2.0 - 3.0 mm
3.0 - 4.0 mm
75 mm
75 mm
12
12
42 704 17 31
42 704 17 32
0,4
0,4
0,5
Stainless Steel 316
Chromium Steel, Strip Length 300 mm
R72SP-S-300-12
R72NP-S-300-12
2.0 - 3.0 mm
3.0 - 4.0 mm
50 mm
50 mm
12
12
42 703 17 21
42 703 17 22
0,3
R73SP-S-300-12
R73NP-S-300-12
2.0 - 3.0 mm
3.0 - 4.0 mm
75 mm
75 mm
12
12
42 703 17 31
42 703 17 32
0,4
0,4
0,5
Chromium Steel 430
Round Wire Fastener R70, Cut to Length upon request
Connecting pins on page 16
Page 9
Fastener Series M60L-P (MATOPATCH)
Page 10
Fastener Series M60L-P (MATOPATCH)
Innovation for the Laundry Industry
MATO Rectangular Wire Fastener Series M60L-P (MATOPATCH) has been specifically
developed for the Laundry Industry. This patented system takes a huge leap regarding life,
design and installation of larger series.
Using this fastener you or your customers will have the advantage of the safest, most enduring
and optically most appealing Belt Lacing System. There will be no more laundry getting caught,
paper scraps or glue residue.
Our Barred Rectangular Wire Fastener, Stainless
Steel with preinstalled textile patch are very suitable
for cotton and felt belts and offer optimum
protection against damage of your laundry.
The lifespan of MATOPATCH Lacing System is usually 4 times higher as the current state of
Technology or as similar looking fasteners in the same field of use. Another feature of this Belt
Lacing System worth mentioning is an integrated protection against belt wear,
low abrasive wear and is low in noise emission.
Belt Cleaning Systems will be treated gently.
MATOPATCH Fasteners are designed in a way that fastener and patch can be installed in
basically one step using according installation units (see page 13). Additional glue and drying
time or use of dangerous materials no longer apply.
We can customize the already excellent design of our fasteners by printing upon your request.
There are currently two sizes covering the standard laundry belt thickness, ranging from 1.6mm
up to 3.2mm (see page 12).
Page 11
MATOPATCH M61.2 - P
Special Design with Patch for the Laundry Industry
- Barred Fastener
- Fastener preinstalled with Patch
- P10 = Plain Patch
Description
Belt Width Fasteners
mm
Per Strip
No of
Laces
Order No
- Box with Connecting Pin MK15-NYN
- Minimum Pulley Diameter 25 mm
- Pitch 2.54 mm
kg
M61.2LSW-P10, Cut to Length
Belt Thickness 1.6 - 2.4 mm
M61.2LSW-P10/SS-25
M61.2LSW-P10/SS-30
M61.2LSW-P10/SS-38
M61.2LSW-P10/SS-38.5
M61.2LSW-P10/SS-40
M61.2LSW-P10/SS-48.5
M61.2LSW-P10/SS-60
M61.2LSW-P10/SS-75
25
30
38
38,5
40
48,5
60
75
7/8
9/10
12/13
13/14
13/14
16/17
20/21
26/27
50
50
50
50
50
50
50
50
42 654 02 50
42 654 03 00
42 654 03 80
42 654 03 85
42 654 04 00
42 654 04 85
42 654 06 00
42 654 07 50
0,2
M61.2LSW-P10/SS-88.5
M61.2LSW-P10/SS-90
M61.2LSW-P10/SS-113.5
M61.2LSW-P10/SS-118
88,5
90
113,5
118
31/32
31/32
41/42
41/42
25
25
25
25
42 654 08 85
42 654 09 00
42 654 11 35
42 654 11 80
0,4
0,3
0,3
0,3
0,3
0,4
0,5
0,6
0,4
Material:
Stainless Steel 316
with Textile Patch
Wire Dimensions
0.9 x 0.5 mm
0,5
0,5
Solid Nylon NYN
(notched)
M61.2LNW-P10, Cut to Length
Belt Thickness 2.4 - 3.2 mm
M61.2LNW-P10/SS-25
M61.2LNW-P10/SS-30
M61.2LNW-P10/SS-38
M61.2LNW-P10/SS-38.5
M61.2LNW-P10/SS-40
M61.2LNW-P10/SS-48.5
M61.2LNW-P10/SS-60
M61.2LNW-P10/SS-75
25
30
38
38,5
40
48,5
60
75
7/8
9/10
12/13
13/14
13/14
16/17
20/21
26/27
50
50
50
50
50
50
50
50
42 664 02 50
42 664 03 00
42 664 03 80
42 664 03 85
42 664 04 00
42 664 04 85
42 664 06 00
42 664 07 50
0,2
M61.2LNW-P10/SS-88.5
M61.2LNW-P10/SS-90
M61.2LNW-P10/SS-113.5
M61.2LNW-P10/SS-118
88,5
90
113,5
118
31/32
31/32
41/42
41/42
25
25
25
25
42 664 08 85
42 664 09 00
42 664 11 35
42 664 11 80
0,4
0,3
0,3
0,3
0,3
0,4
0,5
0,6
0,4
Material:
Stainless Steel 316
with Textile Patch
Wire Dimensions
0.9 x 0.5 mm
0,5
0,5
Solid Nylon NYN
(notched)
Special Connecting Pins on page 15
Boxes with additional content upon request
Printing of the Patch upon request
Page 12
Lacing Tools for MATOPATCH
Connecting Load
- Power Input: 0.6 kW
- Voltage: 230V
Description
- 1 Phase
- 50 Hz
Lacing Width/
Comb Width
Pitch
(mm)
Order No
kg
2,54
42 480 96 60
6,0
MATOPATCHLEVER
Installation Width 60 mm
MATOPATCHLEVER 60WP
60 mm
The MATOPATCHLEVER 60WP has been developed for site independent installations of the very durable MATOPATCH
fastener. Since this tool is independent from a vice, it enables you to install fasteners directly into diverse machines
of large-scale laundries
The MATOPATCHLEVER has been designed for a maximum comb
width of 60 mm of the Belt Fasteners M61.2LSW-P1 or M61.2LNW-P1.
MATOPATCHVICE
Installation Width 120 mm
MATOPATCHVICE 260WP
Conversion Kit MATOHYD 260WP
120 mm
260 mm
2,54
42 200 02 02
42 200 21 90
6,5
5,2
The MATOPATCHVICE 260WP has been developed for installations of small and medium series of our very durable
MATOPATCH Fastener, which is used in a vice. After utilization of the conversion kit MATOHYD 260WP, the tool can be used
in the electro-hydraulic Lacing Tool MATOHYD 200W (see page 17).
The MATOPATCHVICE 260WP has been designed for a maximum
comb width of 120 mm of the Fasteners M61.2LSW-P1 or M61.2LNW-P1.
All other fasteners with a pitch of 2.54mm can be installed in this range.
Installation Units for installation of larger series upon request.
Page 13
Selection Charts
Connecting Pins for Wire Systems M and R for the Laundry Industry
The MATO Connecting Pins are aligned in design and material composition to the MATO
Fasteners. Choosing the right Connecting Pin is an important contribution to reach the optimum
performance of the splice in your application.
We recommend our cut to belt width nylon pins (notched) for typical laundry applications such
as e. g. folding machines
Selection Chart Connecting Pin Size
Fastener Type
M61.2LSW
M63LP
R22NP
M61.2LNW
R22SP
R23NP
M61.2LSW-P
R23SP
R72NP
M61.2LNW-P
R72SP
R73NP
R73SP
MK15…
MK18…
Connecting Pin Size
MK20…
M63LP can be run with MK15NYN as well.
Rust
Resistance
Chemical
Resistance
Magnetism
Rigidity
Flexibility
Varying Belt
Tension,
Small Belts
Smooth solid Nylon
Fastener Wear
Factor
Nylostainless
Nylon coated
316SS-solid wire
Pin Wear
Factor
Nylosteel
Nylon coated
music wire
Abbreviation
Connecting
Pin Type
Selection Chart Connecting Pin Type
...NST
Excellent
Excellent
Acceptable
Acceptable
High
Magnetic
Very Good
Very Good
Good
...NSS
Excellent
Excellent
Excellent
Very Good
Slightly
Magnetic
Very Good
Very Good
Good
Excellent
Excellent
Excellent
Excellent
Non
Magnetic
Acceptable
Excellent
...NY
Solid Nylon
Solid Nylon notched
Smooth
316SS-solid wire
...NYN
Nylocable
Nylon coated zinc plated
cable
Excellent
...WSS
Stainless Steel Wire
316SS-solid wire
notched
Good
Acceptable
Acceptable
Good
Very Good
Very Good
Excellent
Not
Applicable
...WSSN
Excellent
...NC
Excellent
Excellent
Good
Good
Magnetic
Good
Very Good
Good
...NCS
Excellent
Excellent
Excellent
Very Good
Slightly
Magnetic
Good
Very Good
Good
Nylocable Stainless
Nylon coated 316SS cable
Slightly
Magnetic
Page 14
Connecting Pins MK15
for Low Profile Wire Fastener M60L with and without Patch
- Notched
- Diameter 1.5 mm
Description
Belt Width
mm
Length
mm
Pins
per PU
Order No
kg
Connecting Pin MK15-NYN, Cut to Length
Solid Nylon Notched
MK15-NYN-025
MK15-NYN-030
MK15-NYN-032
MK15-NYN-035
MK15-NYN-038.5
MK15-NYN-040
MK15-NYN-048
MK15-NYN-048.5
MK15-NYN-050
MK15-NYN-057
MK15-NYN-060
MK15-NYN-063
MK15-NYN-075
25
30
32
35
38,5
40
48
48,5
50
57
60
63
75
21.5
26.5
28.5
31.5
35.0
36.5
44.5
45.0
46.5
53.5
56.5
59.5
71.5
100
100
100
100
100
100
100
100
100
100
100
100
100
42 208 02 50
42 208 03 00
42 208 03 20
42 208 03 50
42 208 03 85
42 208 04 00
42 208 04 80
42 208 04 85
42 208 05 00
42 208 05 70
42 208 06 00
42 208 06 30
42 208 07 50
0,01
MK15-NYN-083
MK15-NYN-088.5
MK15-NYN-090
MK15-NYN-095
MK15-NYN-100
MK15-NYN-110
MK15-NYN-113.5
MK15-NYN-115
MK15-NYN-120
MK15-NYN-140
MK15-NYN-150
MK15-NYN-168
MK15-NYN-180
MK15-NYN-190
83
88,5
90
95
100
110
113,5
115
120
140
150
168
180
190
79.5
85.0
86.5
91.5
95.5
106.5
110.0
111.5
116.5
136.5
146.5
164.5
176.5
186.5
50
50
50
50
50
50
50
50
50
50
50
50
50
50
42 208 08 30
42 208 08 85
42 208 09 00
42 208 09 50
42 208 10 00
42 208 11 00
42 208 11 35
42 208 11 50
42 208 12 00
42 208 14 00
42 208 15 00
42 208 16 80
42 208 18 00
42 208 19 00
0,01
MK15-NYN-200
MK15-NYN-280
MK15-NYN-285
MK15-NYN-292.5
MK15-NYN-300
200
280
285
292,5
300
196,5
276,5
281,5
289,0
296,5
20
20
20
20
20
42 208 20 00
42 208 28 00
42 208 28 50
42 208 29 25
42 208 30 00
0,01
30m
1
42 513 01 50
0,05
30m
1
42 508 01 50
0,38
0,01
0,01
0,01
0,01
0,01 Connecting Pin MK15...N
0,01 (notched)
0,01
0,01
0,01
0,01
0,01
0,02
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,02
0,02
0,02
0,02
0,02
0,01
0,01
0,01
0,01
Connecting Pin MK15-...N, 30 Meter Coil
Solid Nylon Notched NYN
MK15-NYN
Stainless Steel Wire notched WSSN
MK15-WSSN
Different lengths and / or designs upon request.
Page 15
Connecting Pins MK
Wire Systems M and R for the Laundry Industry
- Connecting Pins in several material compositions
- Different diameters
Descriptions
Diameter-Ø
mm
Order No
kg
1,5
1,8
2,0
42 501 01 50
42 501 01 80
42 501 02 00
0,3
1,5
1,8
2,0
42 502 01 50
42 502 01 80
42 502 02 00
0,3
1,5
1,8
2,0
42 503 01 50
42 503 01 80
42 503 02 00
0,1
1,5
1,8
2,0
42 504 01 50
42 504 01 80
42 504 02 00
0,2
1,5
2,0
42 505 01 50
42 505 02 00
0,2
1,5
1,8
2,0
42 507 01 50
42 507 01 80
42 507 02 00
0,4
Connecting Pin MK, 30 Meter Coil
Nylon Steel NST
MK15-NST
MK18-NST
MK20-NST
0,3
0,3
Nylo Stainless NSS
MK15-NSS
MK18-NSS
MK20-NSS
0,3
0,3
Solid Nylon NY
MK15-NY
MK18-NY
MK20-NY
0,1
0,1
Nylocable NC
MK15-NC
MK18-NC
MK20-NC
0,2
0,3
Nylocable Stainless NCS
MK15-NCS
MK20-NCS
0,3
Solid Wire Stainless WSS
MK15-WSS
MK18-WSS
MK20-WSS
Other sizes in various material compositions upon request.
MK15-NYN, MK15-WSSN, as well as cut to length Connecting Pins NYN, see page 15.
Page 16
0,6
0,7
Connecting Pins MK…
Lacing Tools and Accessories
for the Laundry Industry
- Vice Lacer
- Hydraulic Tools
Description
Lacing Width/
Comb Width
Pitch
(mm)
Order No
kg
42 150 61 63
42 150 20 70
1,9
Eco-Vice Lacer MA
MA60/150
MA20-70/150
150 mm
150 mm
2,54
3,175
1,9
Eco-Vice Lacer MA
Profi-Vice Lacer MATOVICE + Fastener Retainers UNICOMB V
MATOVICE 120
120 mm
UNICOMB 60/300V
UNICOMB 20-70/300V
300 mm
300 mm
2,54
3,175
42 120 00 00
2,3
42 480 10 50
42 480 10 30
0,5
0,5
Profi-Vice Lacer
MATOVICE
Fastener Retainer UNICOMB V
Hydraulic Basic Tool MATOHYD + Electro-Hydraulic Power Unit
MATOHYD 200W
200 mm
MATOHYD Rollset
Power Unit MATOHYD PAW 200-1
1,17l/min, 400V/50HZ/3Phases
Power Unit MATOHYD PAW 200-2
1l/min, 230V/60HZ/3Phases
Power Units with different connecting loads upon request
42 200 00 01
42 200 06 00
42 200 22 03
24,0
42 200 22 04
18,5
Foot Pump MATOHYD FP
42 200 05 00
4,2
18,5
MATOHYD 200W
7,4
MATOHYD PA…
MATOHYD FP
Lacing Tool MATOHYDVICE + Fastener Retainers VH (case hardened)
MATOHYDVICE 200W
200 mm
UNICOMB 60/300VH
UNICOMB 20-70/300VH
300 mm
300 mm
2,54
3,175
42 200 02 01
2,7
42 480 11 50
42 480 11 30
0,5
0,5
MATOHYDVICE
A functioning Lacing Tool consists of a MATOHYD 200W, MATOHYDVICE 200W, an appropriate Fastener Retainer
UNICOMB and either an Electro-Hydraulic Power Unit MATOHYD PAW or a Foot Pump FP.
Routinely, a UNICOMB 300…VH is used in our MATOHYDVICE 200W with according fastener pitch.
To install fasteners with a Vice Lacer, you need a Fastener Retainer for every basic tool MATOVICE
with according length and pitch.
Page 17
Lacing Tools and Accessories
for the Laundry Industry
Description
Working Width
Pitch
(mm)
Order No
kg
2,54
2,54
42 480 86 60
42 050 61 63
2,5
Special Lacing Tools
MATOLEVER
Plier Lacer MZ60
60 mm
50 mm
1,6
MATOLEVER
Plier Lacer MZ60
Special Accessories
Textile Belt Cutter 50mm / 90deg
50 mm
Spare Blades for Textile Belt Cutter PU10
Belt Cutter LD 150
150 mm
Spare Blades for Belt Cutter LD
Belt Clamp W-1
100 mm
Tape Binder for Textile Belts (300 g)
Supergrip Skiver
7 mm
42 050 10 10
42 050 10 11
42 510 01 50
42 510 11 50
42 480 90 00
42 232 02 00
42 640 00 00
Belt Cutter LD 150
Belt Clamp W-1
Supergrip Skiver
Tape Binder for Textile Belts
Page 18
0,4
0,01
2,4
0,01
1,1
0,4
0,1
Textile Belt Cutter
General Conditions Of Sales, Supply And Payment
I. Quotation
The documentation pertaining to the quotation such as illustrations, drawings, details of weights and dimensions are only approximately authoritative where they are not expressly designated as
binding. The supplier retains the right to ownership and Copyright of all cost estimates, drawings and other papers. These must not be made accessible to third parties The supplier has an
obligation not to make accessible to third parties any plans designated as confidential by the purchaser, without the latter's approval.
II. Scope of the delivery
The written order confirmation from the supplier is definitive for the scope of the delivery. In the case of a quotation from the supplier with a time commitment and timely acceptance, the quotation
is definitive, where there is no confirmation of the Order in good time. Supplementary agreements and changes require the written confirmation of the supplier
III. Price and payment
1. In the absence of any special agreements the prices are ex works, including loading at the factory, but excluding packing. VAT at the applicable statutory rate must be added to the prices,
2. In the absence of any special agreement payment is to be made in cash with no deductions and free of charge at the supplier's point of payment i.e.: 1/3 down payment on receipt of the order
confirmation 1/3 when the purchaser is informed that the major components are ready for despatch the remainder within one month of this.
3. The withholding of payments or the offsetting of any counter claims by the purchaser which are disputed by supplier are not permitted.
IV. Delivery time
1. The delivery time begins with the sending of the order confirmation but not before the purchaser furnishes the documents, approvals, clearances to be provided and also the arrival of the agreed
down payment.
2. The delivery times will be extended commensurately in the event of actions which form part of labour disputes, especially strikes and lockouts and also in the event of any unforeseen impediments
which are outside the control of the supplier where such impediments can be shown to have a considerable influence of the manufacture or shipment of the object being supplied. This also
applies when these circumstances occur at sub-suppliers. The circumstances described are also not to be blamed by the supplier when they arise during an already existing delay. In important
cases the supplier will notify the purchaser of the beginning and end of such impediments as soon as possible.
3. The delivery times has been adhered to if by the time it expires the object being supplied has left the factory or its readiness for despatch has been notified.
4. When damage is suffered by the purchaser as a result of delay which has occurred due to the supplier, the purchaser is entitled to request compensation for the delay, to the exclusion of further
claims. For each full week of lateness this will amount to 1/2 of 1%, but at the most 5% of the value of that part of the total delivery which as a result of the delay cannot be utilised in good time
or in accordance with the contract.
5. If despatch is delayed at the wish of the purchaser he will be charged for the cost of storage beginning one month after indication of readiness for despatch, for storage at the supplier's factory
however at least 1/2 of 1% of the invoiced amount for each month. The supplier however is entitled after setting a suitable period and its fruitless expiry to make other use of the object being
supplied and to supply the purchaser over a suitable extended period.
6. Adherence to the delivery period assumes the purchaser meets his contractual obligations.
V. Transfer of risk and acceptance
1. The risk is transferred to the purchaser at the latest upon despatch of the supplied parts, i.e. even if partial deliveries are made or the supplier has taken on further services such as the costs
of despatch or transport and setting up. At the request of the purchaser, and at his expense, the shipment can be insured against theft, breakage, transport, fire and water damage and
other insurable risks.
2. If the despatch is delayed as a result of circumstances which are the fault of the purchaser, then the risk Is transferred to the purchaser from the day of readiness for despatch; the supplier is
however under an obligation, at the wish and expense of the purchaser, to effect insurance which the latter request.
3. Objects supplied, even if they exhibit insignificant defects, are to be accepted by the purchaser regardless of the rights under section VII.
4. Partial deliveries are permissible.
VI. Right of ownership
1. The supplier retains the right of ownership to objects supplied until the arrival of all payments under the contract to supply.
2. The supplier is entitled to insure the object supplied against theft, breakage, transport, fire and water damage and other damage at the purchaser's expense when the purchaser has not
shown that he has taken out hat insurance himself.
3. The purchaser can neither pawn the object supplied nor transfer ownership of it as security. In the event of distrait or other possession by a third party he must inform the supplier without
delay
4. If the purchaser behaves in a manner contrary to the contract, particularly by delaying payment, the supplier is entitled to take back the goods after warning and the purchaser is obliged to
VII. Liability for defects in the delivery
For defects in the delivery, which includes the absence of the properties explicitly promised, the supplier has the following obligations, to the exclusion of further claims regardless of section IX, 4.
1. All parts which within six month of commissioning prove to be unusable or whose usability is significantly impaired as a result of a state of affairs which was present before the transfer of risk,
particularly due to faulty construction, poor material or bad workmanship will be repaired or supplied new at the choice of the supplier, as he judges best. The discovery of such defects is to be
reported to the supplier in writing without delay. Replaced parts become the property of the supplier. If despatch, set up or commissioning is delayed, without blame being attached to the
supplier then this liability expires at the latest 12 month after the transfer of risk. For essential third party products the supplier's liability is limited to the transfer of the entitlement to liability
which exists vis a vis the sup-supplier of the third party product.
2. The right of the purchaser to assert claims due to defects expires in all cases in 6 months from the time of the punctually made complaint, or upon the expiry of the warranty period.
3. No warranty is taken on for damage which occurs due to the following reasons; unsuitable or improper use, incorrect fitting or incorrect repair by the purchaser of by a third party, natural wear
and tear, incorrect or negligent treatment, unsuitable operating materials, replacement materials defective construction work, unsuitable construction site, chemical, electro-chemical or
electrical effects for which the blame cannot be attributed to the supplier.
4. To allow the repairs and the supply of replacements to be carried out, which appear necessary in the best judgment of the supplier the purchaser, after agreement with the supplier, must
provide the necessary time and opportunity otherwise the supplier is released from his obligation for the defect. Only in urgent cases where operational safety is a risk or to avoid
disproportionately large damage, whereupon the supplier must be made aware immediately, or if the supplier is delayed in eliminating the defect, the purchaser has the right to eliminate the
defect himself or have it eliminated by a third party and to demand reimbursement of the necessary costs from the supplier.
5. Of the direct costs in cured by the repairs of the supply of replacements the supplier will - insofar as the complaint is shown to be justified- bear the cost of the replacement items including the
despatch, plus the reasonable costs for the removal and fitting and furthermore, where this can be rightly requested depending on the situation of the individual case, any necessary costs for
providing his mechanics and assistants. The purchaser generally bears all other cost.
6. The warranty period on the replacement items and the repair is three months, but this will run until the time of the expiry of the original warranty period for the object supplied. If repairs are
necessary the period of liability for the object supplied will be extended by the length of the interruption in operation caused by this.
7. Any modifications or repair work carried out on the part of the purchaser or a third party either inexpertly or without the prior approval of the supplier will cancel the liability for the consequences
such actions.
8. Further claims by the purchaser, especially claims for damage which did not occur on the supplied object itself are excluded. The exclusion of liability does not apply if the owner or leading the
owner or leading employee, the supplier is only liable for sensibly foreseeable damage typical of the contract. The exclusion of liability also does not apply in cases where in accordance with the
product liability law liability is accepted for damage to persons or property on privately used objects, where faults exist on the object supplied. It also does not apply when properties.
VIII. Liability for associated obligation
When, through the fault of the supplier, the object supplied cannot be used by the purchaser in accordance with the contract as a result of omitted or incorrect implementation of suggestions or
advice which occurred before or after conclusion of the contract and also other obligations related to the contract, especially instructions for the operation and maintenance of the object supplied then
the rulings in Section VII and IX apply appropriately, to the exclusion of further claims by the purchaser.
IX. The rights of the purchaser to withdrawal, variation and other liability of the supplier
1. The purchaser can also withdraw from the contract is the whole provision of supplies and/or services becomes completely impossible for the supplier before the transfer of risk. The same applies
in the event of the supplier’s inability to deliver. The purchaser can also withdraw from the contract, for an order of objects of the same type, the implementation of a part of the delivery becomes
impossible with respect to quantity or he has a justified interest in refusing a partial delivery, if this is not the case the purchaser can reduce the counter payment to suit.
2. If a delivery delay exists as defined under Section IV of the Conditions of Supply and if the purchaser grants the supplier who is in arrears with the delivery a suitable extension period with an
explicit declaration that after the expiry of this period he will refuse to accept the goods and/or services, and it this extended deadline is not met, then the purchaser is entitled to withdraw.
3. If the impossibility occurs during the delay in acceptance or due to the fault of the purchaser then the purchaser remains obliged to make the counter payment.
4. The purchaser also has the right to cancellation of the contract if the supplier, through his own fault, allows a suitable extension period granted to him for repairs of the supply of replacements
with regard to a defect, as defined in the conditions of supply and attributable to him, to expire fruitlessly. The right of the purchaser to cancellation of the contract also exists in other cases of
failure of the supplier to repair or supply a replacement.
5. Further claims by the purchaser are excluded, especially to termination or reduction and also to compensation for damages of any kind i.e. also for any damages which did not occur on the
supplied object itself. This exclusion of liability does not apply if the owner or leading employee have acted with intent or gross negligence and also if there has been blameworthy violation of
essential obligations under the contract. In the event of blameworthy violations of essential obligations under the contract, except in cases of intent or gross negligence by the owner of leading
employee, the supplier is only liable for sensibly foreseeable damage typical of the contract. The exclusion of liability also does not apply in cases where In accordance with the product liability
law liability is accepted for damage to persons or property on privately used objects, where faults exist on the object supplied. It also does not apply when properties are absent which were
expressly promised when the promise had the intention of covering the purchaser against damage which did not arise on the supplied object itself.
X. Court of jurisdiction
If the purchaser is a fully qualified merchant, a legal personage in public law or a legally separate property proceedings for all disputes arising from a contractual relationship are to be taken at the
court with jurisdiction for the supplier's head office or the branch of the supplier which made the delivery. The supplier is also entitled lo take proceedings against the buyer at the court of jurisdiction
for his head office.
MATO Maschinen- und Metallwarenfabrik
Curt Matthaei GmbH & Co. KG
Page 19
General Remarks
Availability and Delivery Time
In order to provide the soonest possible delivery service, most of the products are available from stock. The delivery time for nonstock items will be advised.
Product Liability
All our items are checked according to the Product Liability Law dated 01.01.1990. However, we emphasise that the use of nonoriginal MATO parts may lead to loss of insurance protection. Furthermore any use of products other than originally inteded has
to be excluded. The operation instructions of our tools/ machines as well as the hints on hazards have to be observed carefully.
Minimum Order Value
Please note that any order treatment involves costs wich are extremly high for small quanitites. Therefore, for order remaining
under 50,00 EUR net, we have to charge a 10,00 EUR fee in order to cover the treatment costs.
Price Validity
The price validity will loose effectiveness in case of extraordinary price changes in the raw material sector.
With this Price List all other price lists will loose their vailidity.
The prices stated in this list are gross prices to which legal VAT has to be added.
Changes
Due to the product development, we reserve the right to change pictures or accessories.
Please observe our Conditions of Sale, Delivery and Payment.
We connect anything!
Please ask for more information about the
Belt Lacing Systems for low tensile conveyor belts up to 750 kN/m
and/or
Belt Lacing Systems for high tensile conveyor belts above 750 kN/m
Page 20