Pre-manufactured Wiring Systems Pre

Pre-manufactured
Wiring Systems
Reduce Construction Schedule
Ensure Quality
Inspector Acceptance
Reduce Packaging and Waste
o Jobsite
on
Secure-Trim
The exclusive Secure-Trim adjustment ring is
standard with every box. The patented design
eliminates device rock and insures a flush plate
finish every time.
Featuring
RACO
®
Boxes, Covers and Fittings
RA-379 R-in R featuring Hub-RACO_2012.indd 1
HUBBELL
Wiring Device Kellems
24-Apr-12 2:41:55 PM
Work Faster & Smarter
3 Simple Steps, DONE!
Reduced Construction Schedule
• Earlier building usage
• Product can be pre-fabricated even
during project hold-ups due to weather,
design changes, delays by other trades.
• Reduced construction schedule equates
to reduced onsite liability
• Minimizes onsite safety hazards caused
by scrap wire and cable
• Reduces jobsite cleanup
• Forces planning and coordination
Find Acceptance by Local
Inspectors
• Rough-in Ready® has been well received
by local inspection agencies thoughout
the country
• All work is performed in strict compliance
of the NEC
• Inspectors recognize the quality of
workmanship and the uniformity of
finished product
Help Ensure Quality Control
• Produced under strict quality control
program
• All pre-fabrication performed in a
controlled environment utilizing stateof-the-art equipment
• Uniform, consistent, finished product
Visit www.roughinready.com
RA-379 R-in R featuring Hub-RACO_2012.indd 2-3
1.
Remove the
tape from
the assembly.
2.
Mount the
assembly in
the proper
location.
3.
Make the assembly’s final
connections.
24-Apr-12 2:46:37 PM
Accurate Cost Estimates
Proposal Breakdown
Estimated Price
By construction area
By area
Quick Ship Form
Mounting Method
Listed by item
Unit Pricing
Electrical Symbols
Standard symbols are
used wherever possible
Easy-to-follow
Nomenclature identifies
cable type, device grade,
and type
Labor Estimates
Calculated using industry
standard methods
Mail or Email your drawings to us
M
a we will work up the entire project in accurately measured runs and components.
and
Detiled drawings will clearly indicate installation by floor and specific location.
D
All components are packaged and delivered in the order needed.
A
For an even quicker turnaround
F
use the Rough-in Ready “Quick-Quote/Quick-Ship Form”.
u
Visit www.roughinready.com
RA-379 R-in R featuring Hub-RACO_2012.indd 4-5
This form provides an express checkout lane
T
for contractors who would prefer more control over their assemblies.
fo
24-Apr-12 2:46:50 PM
When product arrives...
Helps You
Increase Your Market Share
Room#, Assembly# and Job Name
are all clearly marked on each box
Job Cost Savings or Potential
Advantage on Bid Day Calculator
Assembly#’s match destinations clearly
marked on the drawing for easy installation
Job Cost Using the Rough-in Ready System
Job arrives on clearly marked skids
by floor or area, depending on your specs
$ 69,832.00
401.29
45.00
$ 87,889.00
Assembly#’s match destinations clearly
marked on the drawing for easy installation
Rough-in Ready’s System Cost
Rough-in Ready’s Projected Installation Hours
Contractor’s Fully Burdened Labor Rate
Total Installed Job Cost
Job Cost if You Were to Hardwire the Same Openings as the
Rough-in Ready System
$ 36,789.43
2,205.70
45.00
$ 136,045.93
Contractor’s Estimated Material Cost
Contractor’s Estimated Installation Hours
Contractor’s Fully Burdened Labor Rate
Total Installed Job Cost
Total Savings
1,804.41
81.81%
Room#, Assembly# and Job Name
are all clearly marked on each box
RA-379 R-in R featuring Hub-RACO_2012.indd 6-7
48,155.97
35.40%
Total Number of Hours Saved
Total Labor Saving
Total Job Cost Savings or Your Potential Advantage on Bid Day
Total Percentage of Job Cost Savings
24-Apr-12 2:46:55 PM
Time Savers for Every Contractor
Cable/Raceway
C
Ready
Pre-Fab
P
Co
Components
Cable
C
Su
Supports
Cable Holders
Side Mounted On Stud
Upper Cross-brace Brackets
Attachment Tabs Lock
Into Kickstand
Adjustable Spacer
and Back-side Dry-wall
Support for up to
6” Walls
Mounted Between Studs
Device Mounting Frame
Protection Plate
Lower Cross-brace
Brackets
Mounted On Kickstand
Universal
Mounting Bracket
RA-379 R-in R featuring Hub-RACO_2012.indd 8-9
The Complete System
Complete
C
Systems
Complete Rough-in Ready
d SSystems
include our patented, UL Listed,
Rough-in Ready Universal Mounting Bracket, wiring devices, MC-APP
s.
or MC cables and protection plates.
All MC Cable lengths and plaster
ring depths are determined by ourr
engineering department and everyy
assembly is sequentially numbered.
d.
Numbered parts match a detailed
d
layout drawing provided by
Rough-in Ready designers.
Note:
All support brackets available as
Conduit Ready without integral
cable support
24-Apr-12 2:47:03 PM
Cable Ready Assemblies
Raceway Ready Assemblies
Raceway Ready
Assemblies can also be
provided with a sequential numbered drawing or they can be
ordered a la cart.
Cable Ready Assemblies
can also be provided with a
sequentially numbered drawing
or they can be ordered a la cart.
Our less cable assemblies
include the Rough-in Ready
Universal Bracket, wiring
device, plaster ring and protection plate. As in the complete
System, our designers can
determine plaster ring depth
and provide a numbered drawing for ease of installation.
Or, if preferred, you can order
the assemblies with whatever
plaster ring depth you need and
numbering can be provided to
match your design criteria.
Universal Mounting
Bracket with Switch
Our raceway ready assemblies
include the Rough-in Ready
Raceway Universal Bracket,
wiring device, plaster ring,
and protection plate. As in our
complete System, our designers can determine plaster ring
depth and provide a numbered
drawing for ease of installation.
Or, if preferred, you can odrder
the assemblies with whatever
plaster ring depth you need and
numbering can be provided to
match your design criteria.
Three Device Raceway
Mounting Bracket with
Duplex and Data Box
Kickstand and Universal
Raceway Bracket with
Duplex Outlet
Universal Mounting
Bracket with
Duplex Outlet
Kickstand and Universal
Mounting Bracket
with Duplex Outlet
Duplex
Three Device Mounting
Bracket with Duplex
Outlet and Data Box
RA-379 R-in R featuring Hub-RACO_2012.indd 10-11
Data
Open
Universal Raceway Mounting
Bracket with Duplex Outlet
Universal Raceway Mounting
Bracket with Switch
24-Apr-12 2:47:17 PM
Pre-Fabricated Components
Universal Mounting
Brackets are sold individually for use in your own
prefabrication process.
Modular Assemblies
are comprised of wiring devices
with pigtails mounted on plaster
rings, push on wire connectors,
and Secure Trim. These items are
ordered a la cart and will not go
through our engineering department unless it is part of a full
system bid.
You can add a RACO® 4” Sq.
Standard 1-1/2” or 2-1/8”
deep box with ground pigtail
and any depth plaster ring.
All of our brackets come with
the first means of support built
in (this built-in support feature
itself can produce a $1.50 to
$2.00 savings over conventional field support methods).
Our brackets have built in
far side supports that will accommodate wall depths from
2.5” to 6” deep. We have
also designed our bracket with
an integral box attachment
means that allows for the box
and bracket to remain securely
together while the plaster
ring is removed. This makes it
possible to make field terminations in the box without the
need to reassemble the box
and bracket.
Our Universal Brackets are
designed to save time and
money, and any contractor
producing prefabricated assemblies can enhance savings
by utilizing our brackets in
their assemblies.
Universal Mounting
Bracket with Data Box
Duplex Outlet with Pigtails,
push on wire connectors,
and Protection Plate
Switch with Pigtails, push
on wire connectors and
Protection Plate
Kickstand
Mounting Frame
Universal Mounting
Bracket Frame
Four Device Raceway
Mounting Bracket Frame
Three Device Raceway
Mounting Bracket Frame
Four Device
Mounting Frame
Three Device
Mounting Frame
RA-379 R-in R featuring Hub-RACO_2012.indd 12-13
Duplex Outlet, Drywall Ring,
Secure-Trim, Protection Plate
and push on wire connectors
Universal Raceway
Mounting Bracket Frame
24-Apr-12 2:47:24 PM
Support Brackets
and Hangers
Secure-Trim
CS-Cable Support Brackets
Secure-Trim
Leveling Tabs
Snap-in Here
Protection Plate
Our Cable Support Brackets are designed for
multi-conductor MC
Cut Here
Device Screws
Secure-Trim Single Cat. #ST1
Secure-Trim
Protection Plate
Leveling Tabs
LISTED
Snap-in Here
Cut Here
Secure-Trim 2 Gang Cat. #ST2
LISTED
Secure-Trim™
Deck Hangers
Our Deck Hanger was designed to be used for
both high and low bay lighting installations.
After attaching the Deck Hanger to the roof deck
with four self tapping screws, a fixture hook is put
through the hole and a chain is attached to complete the installation.
This product is designed to replace conventional
mounting methods which would have included
an expensive lag or intensive strut system. Our
hangers can also be used to mount just about
anything that you need to suspend from the roof.
RA-379 R-in R featuring Hub-RACO_2012.indd 14-15
by Rough-in Ready allows for a perfect, level finish every time. The unique, patented design eliminates “device
rock” and unsightly gaps between the device wall plate and wall surface. More importantly, it allows device finish
work to adapt to any wall configuration or wall changes on jobs. Secure-Trim is easy to use and is included standard with every Rough-in Ready single and double gang duplex assembly.
Remove Rough-in
Ready protection plate
Detach device
supports
Install finish plate
Snap on top and bottom
device supports
Final adjustment:
level and tighten device
24-Apr-12 2:47:35 PM
®
Custom Fixture Whips
MC, MC-AP & HCFC
M
C
Cable
Whips can be cut to any length
th
with or without connectors attached.
d.
A fixture whip can be supplied with
plate attached for lay-in fixtures.
s.
Take Advantage of Our Experience, Quality and Service to
Drive Your Business
Draw on the collective expertise of three industry leaders to maximize your productivity and
market share.
Hubbell® Rough-in Ready® prefabricated and preassembled solutions feature electrical steel boxes from
Hubbell RACO® along with Hubbell Wiring Device-Kellems devices. When combined with Rough-in
Ready’s engineering design and state-of-the-art manufacturing capabilities, you receive unparalleled
experience in electrical contracting and installation.
The benefit - a tailored solution with an easy to identify convention that details project name, room
number and assembly for a fast and reliable installation.
Simplify your efforts from bid submittals and layout drawings, through delivery and installation.
To find out more about how Hubbell Rough-in Ready components, designs, and specifications can add
to your bottom line call: (800) 717-2696
Rough-in Ready, 10891 State Route 128, Harrison, OH 45030
www.roughinready.com
Rough-in Ready is a division of Denier Electric Co., Inc.
RA-379
2012 Hubbell Incorporated (Delaware)
Copyright Rough-in Ready 2012
RA-379 R-in R featuring Hub-RACO_2012.indd 16
24-Apr-12 2:47:50 PM