PRODUCTS - GMT | Gummi Metall Technik GmbH

Transcription

PRODUCTS
BUFFERS
RAILS
ELASTOMERIC MOUNTINGS
BUSHES & BALL JOINTS
SPECIAL ELEMENTS
Index
Page
Page
Technical information . . . . . . . . . . . . 2–15
Buffers
Type D . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
Type F/I . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8+9
Type F/II . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Type U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Page
Bushes & Ball joints
Bushes . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Type 410 . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
Type 420 . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Type A . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1+2
Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3+4
Bushes / Special design . . . . . . . . . . . . . . .
4
Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5+6
Ball joints . . . . . . . . . . . . . . . . . . . . . . . . . .
5–13
Type A/F . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
Type B/F . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Type C/F . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Crane stop buffers with outside thread . . . 10+11
Crane stop buffers with base plate . . . . . . 12+13
Stop buffers D . . . . . . . . . . . . . . . . . . . . . . 14
Stop buffers E . . . . . . . . . . . . . . . . . . . . . . . 14
Stop buffers K/D . . . . . . . . . . . . . . . . . . . . . 15
Stop buffers K/E . . . . . . . . . . . . . . . . . . . . . 15
Stop buffers KP/D . . . . . . . . . . . . . . . . . . . 16
Suction bases . . . . . . . . . . . . . . . . . . . . . . . 17
Special buffers . . . . . . . . . . . . . . . . . . . . . . 18–29
Elastomeric mountings
Insulators . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Machine feet . . . . . . . . . . . . . . . . . . . . . . . .
2–4
Machine feet, height-adjustable . . . . . . . .
5–7
IS-Elements . . . . . . . . . . . . . . . . . . . . . . . .
8+9
Bolster springs . . . . . . . . . . . . . . . . . . . . . .
1
Triflex 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10+11
Hollow springs . . . . . . . . . . . . . . . . . . . . . .
2–5
Triflex 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12+13
Compound springs . . . . . . . . . . . . . . . . . . .
6+7
MF-Elements . . . . . . . . . . . . . . . . . . . . . . . 14+15
Multi layer springs . . . . . . . . . . . . . . . . . . .
8+9
U-Bearings . . . . . . . . . . . . . . . . . . . . . . . . . 16
Spring washers . . . . . . . . . . . . . . . . . . . . . . 10+11
Air springs . . . . . . . . . . . . . . . . . . . . . . . . . . 17–19
Rubber blocks . . . . . . . . . . . . . . . . . . . . . . 12+13
Cone mountings . . . . . . . . . . . . . . . . . . . . . 20–26
Axle springs . . . . . . . . . . . . . . . . . . . . . . . . 14–16
Cap elements . . . . . . . . . . . . . . . . . . . . . . . 27–32
Cone springs . . . . . . . . . . . . . . . . . . . . . . . 17–18
Rubber-Cork-Pads . . . . . . . . . . . . . . . . . . . 33
Roller springs . . . . . . . . . . . . . . . . . . . . . . . 19–24
Profiled mats . . . . . . . . . . . . . . . . . . . . . . . . 34
Rails
Core-Slabs . . . . . . . . . . . . . . . . . . . . . . . . . 35
Type A/I . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1+2
Type A/II . . . . . . . . . . . . . . . . . . . . . . . . . . .
3+4
Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Special elements
Allgemeine Verkaufs- und
erbedingungen
GMT-plants
and sales offices
Wir haben unser Produktprogramm erweitert · We have introduced a new product line
für alle Industriebereiche, z. B.:
for all industries,
e. g.:
• Lebensmittel
• Wasser
• Elektrik
• Elektronik
• Bremsen
• Schienenfahrzeuge
• Maschinenbau
• Medizintechnik
• Luftfahrt
• Food
• Water
• Electrics
• Electronics
• Brakes
• Rail vehicles
• Machine
building
• Medical care
• Aerospace
in allen Elastomerqualitäten
made of all
elastomers
GUMMI-METALL-TECHNIK
GmbH
D-77815 Bühl · Germany
P.O. Box 1253 · D-77802 Bühl
Werk/Plant 1: Im Ehlet 24
Werk/Plant 2–4: Liechtersmatten 5
Werk/Plant 5: Erlenstraße 15
Tel. +49 (0) 72 23-8 04-0 · Fax +49 (0) 72 23-2 10 75
www.gmt-gmbh.de
Technical information
2
Missing details upon request. No guarantee for correctness of technical dates. Accordingly we reserve the right to alter, amend or withdraw any product without notice.
3
4
5
6
7
8
9
10
11
12
13
Rubber quality list
Commercial name
Perbunan
Neoprene
SBR
Acrylic
rubber
Polyboron
rubber
Epichlorohydrin
rubber
Butyl
rubber
Hydrogenated
NBR
Natural rubber
Acrylonitrile
butadiene rubber
Chloroprene
rubber
Styrene butadiene Polyurethane
rubber
Good resistance to
high temperatures
and mineral oils,
high resistance to
oxygen and ozone,
unfavourable lowtemperature
properties.
High mechanical
strength, good
resistance ozone,
medium resistance
to oil, flexibility/
damping property
can be varied as
required, excellent
resistance to
water, slight
permanent set.
Low gas permeability, very good
low-temperature
properties, good
resistance to
mineral oils,
ozone and high
temperatures.
Very slightly
permeable to air,
steam and other
gases, good
resistance to heat,
oxygen, ozone and
many chemicals
and solvents, good
electrical properties (isolating),
good resistance
to abrasion and
tear propagation.
High resistance to
heat, ozone and oil,
good mechanical
properties also at
high temperatures,
excellent resistance to wear
and tear.
Characterized by
flexibility, strength
and low-temperature resistance as
well as excellent
physical properties
ideal for bonded
rubber/metal
elements. Not
suitable for petrol,
grease, oils and
ozone.
Highly resistant to
abrasion and
tearing, particularty
resistant to ageing.
Particularly recommended for crude
oil products, high
temperatures,
heating and lubricating oils, petrol
and paraffin oil.
All-purpose synthetic rubber, flame
resistant, resistant
to abrasion, very
robust, good
dielectric strength,
particularly recommended for
exposure to ozone
and weathering.
Similar to natural
rubber, resistant to
abrasion, rubbing
in, good resistance
to high temperatures and cracking,
resistance to
extreme low
temperatures, not
resistant to petrol,
benzene, greases
and oils.
Excellent resistance to wear and
tear, best flexibility
with high shore
hardness of all the
elastomers, good
resistance to oil,
not resistant to
hydrolysis.
ACM
PNR
ECO
IIR
HNBR
NR
NBR
CR
SBR
Hardness available
50 – 80 Shore A
10 – 80 Shore A
50 – 90 Shore A
40 – 85 Shore A
40 – 90 Shore A
25 – 95 Shore A
25 – 95 Shore A
30 – 90 Shore A
35 – 95 Shore A
Resistance to temperatures
–35° C to +175° C –40° C to +80° C
–40° C to +130° C –40° C to +130° C –40° C to +175° C –40° C to +80° C
–40° C to +140° C –30° C to +120° C –30° C to +110° C –30° C to +80° C
–70° C up to +180° C –40° C up to +150° C –40° C to +120° C –30° C up to +225° C
Short-time peak temperature
+ 200° C
+ 150° C
up to + 160° C
up to + 225° C
International designation
+ 100° C
+ 150° C
+ 200° C
+ 100° C
up to + 150° C
up to + 150° C
Polyurethane
Hypalon
Viton
EPDM Ethylenepropylene
diene-rubber
Resistant to high
Versatile in use, very
temperatures,
good flexibility,
odourless and
resistant to abrasion,
tasteless, nontoxic, resistant to wear and
can be sterilized in tear, resistant to
accordance with
ozone and weather,
foodstuffs regularesistant to low
tions, resistant
temperatures, can
to sea water and
be used to protect
corrosive salt solu- against washing and
tions, not to be used spraying agents,
in conjunction with excellent for profile
steam, concentracords, not usable
ted acids and lyes, in conjunction with
swells strongly
petrol, solvents and
under the effect of
mineral oils.
aromatic solvents.
Chlorosulphonated
polyethylene
Fast to light, colourfast, flame-resistant,
good dielectric
strength, particularly
recommended for
exposure to sunlight,
ozone, weather and
oxidizing, chemicals,
however, it has
a very low tensile
strenght.
Fluorinated
rubber
PUR
MVQ/ SI
EPDM/EPM
CSM
FPM
55 – 98 Shore A
40 – 80 Shore A
30 – 90 Shore A
50 – 95 Shore A
65 – 90 Shore A
up to + 100° C
Silicone
APTK rubber
Silicone
rubber
up to + 180° C
up to + 175° C
Hexafluoropropylene
vinylidene, fluoride
copolymer. Resistant
to extreme temperatures even over 200° C.
Very good mechanical
properties and high
resistance to tearing
even at high temperatures.
Excellent for exposure
to sunlight, ozone and
weather.
Not recommended
for use in conjunction
with esters and
ketones.
up to + 350° C
Tensile strength
in kp/sq. cm (N/sq. mm)
160 (16)
170 (17)
170 (17)
170 (17)
300 (30)
250 (25)
250 (25)
250 (25)
250 (25)
300 (30)
80 (8)
200 (20)
180 (18)
200 (20)
Tensile elongation in %
up to 350
300 to 700
150 to 500
400 to 800
150 to 600
800
500
450
450
800
250
450
300
400
Properties
Abrasion
moderate
good
moderate
good
very good
good
very good
good
very good
excellent
moderate
good
moderate
moderate
Resistance to flex cracking
moderate
moderate
good
moderate
very good
good
moderate
very good
good
–
bad
very good
good
good
Elongation/tensile strength
good
good
good
good
very good
excellent
good
good
good
excellent
bad
good
good
good
Flexibility
low
as required
moderate
slight
good
excellent
good
good
good
good
good
good
good
moderate
Notch strength/strength of structure
–
moderate
good
good
good
excellent
good
good
good
excellent
moderate
moderate
good
almost good
Resistance to light
good
good
good
very good
good
bad
bad
very good
moderate
good
excellent
excellent
excellent
excellent
Resistance to oxidzing
very good
good
good
very good
good
moderate
moderate
good
moderate
good
very good
excellent
excellent
excellent
Resistance to ozone
very good
good
very good
very good
good
moderate
moderate
very good
moderate
good
excellent
excellent
excellent
excellent
Resistance to wear and tear
good
good
–
good
good
very good
very good
very good
very good
excellent
bad
good
good
almost good
Weathering effect
very good
good
good
very good
good
good
moderate
very good
good
moderate
excellent
excellent
excellent
excellent
Lyes
not suitable
moderate
bad
very good
good
good
good
very good
good
not suitable
not suitable
excellent
very good
very good
Petrol
not suitable
not suitable
good
not suitable
good
not suitable
excellent
moderate
not suitable
very good
not suitable
not suitable
moderate
excellent
Benzole
not suitable
not suitable
good
not suitable
moderate
not suitable
bad
not suitable
not suitable
not suitable
not suitable
not suitable
not suitable
good
Foodstuffs*
not suitable
not suitable
not suitable
suitable
not suitable
suitable
suitable
suitable
suitable
not suitable
excellently suitable
suitable
suitable
not suitable
Solvents, aliphatic
bad
not suitable
good
not suitable
very good
not suitable
very good
moderate
not suitable
very good
not suitable
bad
moderate
very good
good
Resistance to
Solvents, aromatic
bad
not suitable
good
not suitable
conditional
not suitable
conditional
moderate
not suitable
moderate
not suitable
not suitable
moderate
Solvents, halogene
bad
not suitable
not suitable
not suitable
conditional
not suitable
bad
bad
not suitable
bad
not suitable
not suitable
moderate
good
Oils and greases
very good
conditional
very good
not suitable
very good
not suitable
excellent
good
not suitable
very good
good
bad
good
good
Acids
not suitable
moderate
moderate
very good
moderate (conditional) conditional
conditional
good
conditional
not suitable
not suitable
very good
very good
very good
Water
good
excellent
moderate
good
very good
good
very good
very good
not suitable
good
very good
good
good
good
*with special formulations only · The properties referred to above are given for guidance only · The properties indicated here are affected by temperature, concentration etc. in specific applications and cannot be guaranteed.
14
15
Buffers
Buffers
Type A
Type B
Type C
Type A/F
Type B/F
Type C/F
Crane stop buffers with outside thread
Crane stop buffers with base plate
Stop buffers D
Stop buffers E
Stop buffers K/D
Stop buffers K/E
Stop buffers KP/D
Suction bases
Special buffers
1
Buffers
2
Buffers
Buffers
3
Buffers
4
Buffers
5
Buffers
6
Buffers
7
Buffers
8
Buffers
9
Stop buffers
10
Stop buffers
11
Stop buffers
12
Stop buffers
13
Stop buffers
14
Stop buffers
15
Stop buffers
16
Suction bases
17
Special buffers
18
Special buffers
19
Special buffers
20
Special buffers
21
Special buffers
22
Special buffers
23
Special buffers
24
Special buffers
25
Special buffers
26
Special buffers
27
Special buffers
28
Special buffers
29
Rails
Rails
Type
Type
Type
Type
Type
Type
Type
Type
A/I
A/II
B
C
D
F/I
F/II
U
Rails
1
Rails
2
Rails
3
Rails
4
Rails
5
Rails
6
Rails
7
Rails
8
Rails
9
Rails
10
Rails
11
Insulators
Insulators
Machine feet
Machine feet, height-adjustable
IS-Elements
Triflex
MF-Elements
U-Bearings
Air springs
Cone mountings
Cap elements
Rubber-Cork-Pads
Profiled mats
Core-Slabs
1
Machine feet
2
Machine feet
3
Machine feet
4
5
6
7
IS-Elements
8
IS-Elements
9
Triflex
10
Triflex
11
Triflex
12
Triflex
13
MF-Elements
14
MF-Elements
15
U-Bearings
16
Air springs
17
Air springs
18
Air springs
19
Cone mountings
20
Cone mountings
21
Cone mountings
22
Cone mountings
23
Cone mountings
24
Cone mountings
25
Cone mountings
26
Cap elements
27
Cap elements
28
Cap elements
29
Cap elements
30
Cap elements
31
Cap elements
32
Rubber-Cork-Pads
33
Profiled mats
34
Core-Slabs
35
Bushes
Bushes Type 410
Bushes Type 420
Bushes / Special design
Ball joints
1
Bushes
2
Bushes
3
Bushes
4
Ball joints
5
Ball joints
6
Ball joints
7
Ball joints
8
Ball joints
9
Ball joints
10
Ball joints
11
Ball joints
12
Ball joints
13
Bolster springs
Special elements
Bolster springs
Hollow springs
Compound springs
Multi layer springs
Spring washers
Rubber blocks
Axle springs
Cone springs
Roller springs
1
Hollow springs
2
Hollow springs
3
Special elements
Hollow springs
4
Hollow springs
5
Compound springs
6
Compound springs
7
Multi layer springs
8
Multi layer springs
9
Spring washers
10
Spring washers
11
Rubber blocks
12
Rubber blocks
13
Axle springs
14
Axle springs
15
Axle springs
16
Cone springs
17
Cone springs
18
Roller springs
19
Roller springs
20
Roller springs
21
Roller springs
22
Roller springs
23
Roller springs
24
DIN ISO 9001
Zertifizierte Qualität
Unless otherwise specified we do use
Natural Rubber in manufacturing.
Our standard products are available
in three different shorehardnesses:
soft, medium and hard.
DIN ISO 9001
Certified Quality
All elements can be manufactured
using other elastomers:
please make sure to get a quote on
special materials.
A guide to various rubber compounds
is given on page 14 & 15 of the
technical information chapter. Please
note that the information in the table
is a guideline only – please contact
us with your special requirements for
proper selection of the compound
suited for your application.
P.O. Box 1253 · D-77802 Bühl · Liechtersmatten 5
Plant 1: Dr.-Georg-Schaeffler-Str. 24
Plant 2-4: Liechtersmatten 5; Plant 5: Erlenstraße 15
Tel. +49 (0) 72 23/8 04-0 · Fax +49 (0) 72 23/2 10 75
Internet: www.gmt-gmbh.de · E-Mail: [email protected]
GUMMI-METALL-TECHNIK
GmbH
D-77815 Bühl · Germany
●● ●
●●
●●
●
●
●
Production plants
Sales offices
SWITZERLAND
FRANCE
GUMETA AG
Kautschuk-Werk
Buchrainstraße 2
6030 Ebikon
Tel. +41 (0)41/4 40 17 17
Fax +41 (0)41/4 40 50 60
E-Mail: [email protected]
GMT FRANCE
Z. I. Ste Agathe – Rue Paul Langevin
BP 10049
57192 Florange Cedex
Tel. +33 (0) 3/82 59 33 90
Fax +33 (0) 3/82 59 33 99
MALAYSIA
REPUBLIC OF IRELAND
AUSTRIA
BELGIUM
GMT (M) SDN.BHD.
P.O. Box 82
Industrial Estate
33000 Kuala Kangsar
Perak
Tel. +60 (0) 5/77 61 742
Fax +60 (0) 5/77 65 700
GMT IRELAND LTD.
Clifden
Co. Galway
Tel. +353 (0) 95/2 13 82
Fax +353 (0) 95/2 17 04
GMT GUMMI-METALL-TECHNIK
GMBH
Teufligen 4
4872 Neukirchen a. d. Vöckla
Tel. +43 (0) 76 82 40 55 1-11
Fax +43 (0) 76 82 40 55 1-99
GMT BELGIUM S.A./N.V.
Chaussée de Louvain 165
5310 Eghezée
Tel. +32 (0) 81/81 14 40
Fax +32 (0) 81/81 24 40
USA
INDIEN
CHINA
ENGLAND
GMT INTERNATIONAL CORP.
Villa Industrial Park
P.O. Box 117
Villa Rica
Georgia 30180
Tel. +1 / 770 / 4 59-57 57
Fax +1 / 770 / 4 59-09 57
GMT INDIA PVT. LTD.
Plot No. 27C, KIADB Industrial Area
Off. Bangalore - Mysore Highway
Bidadi, Bangalore – 562109
Tel: +91 80 66961500 to 507
Fax: +91 80 66961509
GMT GUMMI-METALL-TECHNIK
(TIANJIN) CO. LTD.
Jimei Industrial Park 19A
Xiqing Economic Development Area
300385 Tianjin
Tel. +86 (0) 22/2388 8168
GMT RUBBER-METAL-TECHNIC LTD.
The Sidings
Station Road
Guiseley, Leeds, LS20 8BX
West Yorkshire
Tel. +44 (0)19 43/87 06 70
Fax +44 (0)19 43/87 06 31
06/2010
●

PRODUCTS - GMT | Gummi Metall Technik GmbH

Transcription

Similar documents

DYNAMiC

Deluxe Footmuff

1981 Cessna Conquest II 441-0179

Switzerland - Wallis - Fiesch Details

Newsletter July 2008

February 8th at 12:45 pm CINEPLANET 16

Switzerland - Wallis - Fiesch Details

SHAKIRA`S SANCTUARY SABBATICAL

Instruction of NV-210