Dental equipment

Dental equipment
67095 • NOUVAG AG©, all rights reserved • Subject to change
for Implantology and Endodontic applications
Nouvag History
What started in 1971 under the simplest conditions as a small, modest venture can now present itself as a worldrenowned and successful supplier for the dental and medical industry.
40 Years Nouvag AG - an eventful story
With the objective of trading and manufacturing motors
for industry and for apparatus construction, Beda Hutter
founded the one-man company Nouvag B. Hutter-Koch
in 1971. At the company location in Rosengartenstrasse,
Rorschach, Switzerland, the young entrepreneur specialised
in manufacturing and supply of small motors for apparatus
construction.
Growth in spite of recession
On July 5th 1974, the one-man company was converted into
the stock corporation “Nouvag AG”. At that time, many
companies had to grapple with an upcoming recession.
Nouvag AG was not only unaffected by this economic slump,
but quite on the contrary saw itself confronted with the
necessity of making plans for expansion, as the steadily
growing volume of orders no longer permitted optimal
production procedures at the site where the company was
located at that time.
Nouvag AG in 2011
Today, the company employs around 100 – for the most
part highly qualified – specialists. Special value is placed on
comprehensive training of the approx. 8-10 apprentices.
Leading market position
Nouvag plays a leading role especially in the field of drug
nebulization. This is a form of drug administration which is
extremely well tolerated by patients.
Every year, around 20,000 new appliances and instruments
are used by customers in over 190 countries around the globe.
Thanks to intensive research and a high innovative potential,
our small Swiss company has succeeded in occupying a
leading market position in the specialised market niche of
medical technology and body care.
In 1976, the company was able to move to a new plant. Even
at this early stage, Beda Hutter, the dynamic entrepreneur,
had realized that successful exploitation of the market and
further expansion of the company would only be possible if
the company developed its own range of products. Market
analysis combined with an element of intuition led Nouvag AG
to venture into the crisis-proof segment of medical technology
with its excellent future potential.
Expansion and relocation to Goldach
Thanks to the superb quality of the products, the company
succeeded in expanding not only its geographical market,
but also its product range. Steady growth soon led to new
problems with insufficient space. A planned expansion at
the Rosengartenstrasse site was delayed time and again by
additional legal injunctions or appeals, and so it was almost a
stroke of luck when the opportunity came in 1991/92 to take
over the vacant “Odol” plant complete with office building and
high-rack storage facility.
At the beginning of 1992, part of the production was moved
to these facilities located in Goldach. When the Rothenstein
property was purchased and the château-like mansion
renovated and converted of into an administration building,
relocation of the administration to Goldach, which took place
in early December 1993, followed as logical consequence.
Future
Besides research, development and a production standard
which meets the most stringent quality requirements, the
company places greatest value on presenting a professional
market image in its sales and at trade fairs.
Owner and chief executive director Beda Hutter is convinced
that personal front-line commitment by the company director
is still of great importance even today in order to establish
and maintain successful business relationships.
Continued growth of Nouvag AG in future is ensured by
participation in a wide variety of trade fairs on all continents.
MD 20,
solid as a rock
The MD 20 Motor System is a powerful and userfriendly dual motor drive used in oral, jaw and facial surgery, as well
as well as all implant works.
Nouvags MD 20 is a dual
drive Motor System with a
wide, clear display that shows
all main function at a glance.
Every function is selectet by
its own button. High Quality
manufacturing with a solid
housing and a performance
to meet the dentists needs
are the core attributes of
this unique product. An
automatic torque limiter and
an automatic stop at the
reach of a preselected torque
are featured as well as an
integrated peristaltic pump
to prevent tissue damage.
•Three individual programs
per motor
•High performance and
torque
•Dual motor system for
smooth operation
•Highest quality and reliability
•Wide range of features and
accessories
Art. No.: 2268
Type:
MD 20
Input Voltage (switchable):
100/115/230 Volt at 50-60 Hz
Power consumption:
160 W
Speed range, micromotor:
500 – 40’000 rpm
Drive system:
Electronic motor (brushless)
Motor torque:
8 Ncm
Handpiece torque:
10 – 55 Ncm
Fluid flow rate:
10 – 50 ml/min.
Dimensions, control unit:
290 x 270 x 145 mm, (W x H x D)
Weight, control unit:
4.5 kg
MD 10,
full featured with best price-/performance ratio
The MD 10 is used in Implantology and microsurgery. The unit is designed for drilling, screwing and sawing. A built-in
irrigation system minimizes the heat generation of the rotating instruments in order to reduce infections that can
cause tissue damage.
The MD 10 with its mature
technology impresses
with its full featured
construction standard and
its high performance without
the high price tag of its
competitors. It comes with
an automatic torque limiter
and an automatic stop at
the reach of a preselected
torque. A maximum torque
of 10 Ncm at the motor and
a wide range of accessories
put this device in the top ten
of implantology Systems of
good price-/performance
ratio.
•Very good price-/performance ratio
•Included peristaltic pump
for irrigation
•Alarm buzzer at reverse
mode
•Fixed preset Speed keys
•10 pre selectable torque
levels
Art. No.: 2012
Type:
MD 10
Input Voltage (switchable):
115/230 Volt at 50-60 Hz
Power consumption:
130 W
Speed range, micromotor:
500 – 40’000 rpm
Drive system:
Electronic motor (brushless)
Motor torque:
10 Ncm
Handpiece torque:
10 – 55 Ncm
Fluid flow rate:
10 – 50 ml/min.
Dimensions, control unit:
260 x 300 x 400 mm, (W x H x D)
Weight, control unit:
3.0 kg
TCM Endo V,
for root canal preparation
The TCM Endo V is a microprocessor controlled Motor System for fast and easy root canal preparation with rotary
instruments. Built-in Apex Locator for exact determination of the apical distance.
TCM Endo V with built in
Apex Locator with presets
for automatic reduction of
rotation speed, automatic
stop or automatic reverse
of the rotation at reach of
the apical foramen. Torque
control reverse rotation
reduces instrument breakage.
The lightweight, ergonomic
handpiece is distinguished by
low vibration operation. Wide
speed range allows working
with high-speed instruments.
Art. No.: 1534
Type:
TCM Endo V
Input Voltage (switchable):
115/230 Volt at 50-60 Hz
Power consumption:
60 W
Speed range, micromotor:
150 – 2’000 rpm
Measuring tolerance for Apex:
± 0.2 mm
Test Voltage frequencies:
500 Hz and 7.5 kHz
Dimensions, control unit:
120 x 115 x 185 mm, (W x H x D)
Weight, control unit:
1.8 kg
File type:
NiTi files, shank Ø 2.35 mm,
(ISO 1797: Type 1)
Handpieces for implantological applications
Fully autocalvable Handpieces made of stainless steel, solid and durable, availlable with different transmissions, all
equipped with INTRA EN couplings. External cooling and optional internal cooling to prevent of tissue damage.
The Nouvag angled
Handpieces for drilling are all
made out of steel. The vast of
them are also available with
push button quick release.
The solid construction and
its well designed details
guarantee for long life and
make them fully autoclavable.
Transmission
ratio
Article No.
1 : 1
4 :1
8 : 1
16 : 1
32 : 1
70 : 1
5050
5055
5058
5060
5054
5065
Handpieces for general dental applications
Article No.:
1710
General surgery handpiece of
90 mm length, 1:1 trans­mission,
spray nozzle and Quick lock for
instruments from 44 mm/ø 2.35 mm
Article No.:
1950
Handpiece of 105 mm length,
1:1 trans­mission, spray nozzle and
Quick lock for 70 mm/ø 2.35 mm
instruments
Kirschner Handpiece
Article No.:
5010
Kirschner Handpiece
This Kirschner Handpiece was developed for difficult-to-access regions.
The small head ensures maximum
room for manoeuvre.
Saws for Oral and Maxillofacial Surgery
Check out our Micro Motors, Contra Angles and Handpieces for your specific applications. We have a wide range
of extensions and accessories that are manufactured at Nouvag in its legendary swiss quality. Contact our sales
representative and share your wish.
Spare blades of 0.4 mm thickness,
in packing units of 6 pieces.
11 mm
14 mm
18 mm
22 mm
26 mm
17 mm, rounded
21 mm, rounded
4 mm
6 mm
Art. No.: Article No.:
5040
5041
5042
5043
5044
5045
5105
5106
MSS 5000 Micro-jigsaw
with INTRA EN3964 coupling,
removable irrigation tube, recommended speed 15,000 rpm
The micro-jigsaw for sawing and
rasping with tools of different
lengths and designs.
9 mm
Article No.:
Rasp tool, hardened steel,
Packing unit of 1 piece.
4 mm
33 mm
27 mm
33 mm
27 mm
16 mm
45 mm
16 mm
15 mm
12 mm
10 mm
15 mm
15 mm
45 mm
45 mm
12 mm
10 mm
9 mm
6 mm
6 mm
5 11
o. :
o. :
t. N
t. N
Ar
Ar
6 mm
Art. No.: 9
8
5 11
7
5 11
t. N
t. N
o. :
45 mm
Ar
o. :
t. N
Ar
9 mm
o. :
5 11
6
5 11
5
5 11
o. :
t. N
Ar
4 mm
4
33 mm
Ar
10 mm
12 mm
17 mm
12 mm
10 mm
5 mm
29 mm
4 mm
9 mm
12 mm
4 mm
6 mm
5098
45 mm
12 mm
15 mm
13.3 mm
27 mm
5095
27 mm
33 mm
45 mm
13.3 mm
OMS 5000 Oscillating micro-saw
with INTRA EN3964 coupling,
removable irrigation tube, recommended speed 15,000 rpm.
These micro-saws come into use in
all applications where it is necessary
to cut at right angles.
45 mm
27 mm
4 mm
5097
45 mm
33 mm
16 mm
45 mm
9 mm
5094
6 mm
33 mm
9 mm
13.3 mm
13.3 mm
5096
16 mm
33 mm
5093
45 mm
12 mm
10 mm
33 mm
15 mm
13.3 mm
13.3 mm
33 mm
15 mm
5099
16 mm
27 mm
5100
45 mm
5046
5090
10 mm
12 mm
27 mm
10 mm
16 mm
33 mm
16 mm
6.3 mm
33 mm
12 mm
6.3 mm
10 mm
9 mm
4 mm
6 mm
15 mm
Art. No.: Art. No.
16 mm
Cutting depth Shaft length
9 mm
15 mm
Saw blade
33 mm
27 mm
12 mm
45 mm
10 mm with 0.4 mm of thickness!
Fine cuts
Packing6 mmunit with one piece.
5110
MOS 5000 Sagittal Saw
with INTRA EN3964 coupling,
removable irrigation tube, recommended speed 15,000 rpm.
The sagittal saw is ideal for applications in which the two other saws
are unsuitable for reasons of space.
Saw blades of 0.4 mm thickness,
in packing units of 6 pieces.
Mucosal grafting Handpiece
Article No.:
1970
Mucotome
The mucotome for treating oral mucosa, works with a cutting thickness
of 0.5 mm and a width of 6 mm.
Daily use and maintenance
Article No.:
Tube-Set for MD 20
3 meter sterile, disposable tube set.
6024
Article No.:
Tube-Set for MD 10
2 meter sterile, disposable tube set.
1706
Article No.:
1984
Nou-Clean Spray
For care and maintenance of electronic motors
and Handpieces.
Nouvag AG · St.Gallerstr. 23–25 · CH-9403 Goldach
Phone +41 (0)71 846 66 00 · Fax +41 (0)71 846 66 70
[email protected] · www.nouvag.com
Nouvag GmbH · Schulthaißstr. 15 · D-78462 Konstanz
Phone +49 (0)7531 1290-0 · Fax +49 (0)7531 1290-12
[email protected] · www.nouvag.com
Nouvag trading partner: