Special finishes incur 20% up-charge - 6-8 week

Special finishes incur 20% up-charge - 6-8 week

C
I
T
S
U
R
Please note:
All specifications for
this catalog can we
found at
www.hamiltonsinkler.
com/technical
RUSTIC BRONZE COLLECTION
Our stock line of goods in Bronze Patina Finish.
Shipping 1-2 weeks pending availability.
Pg. 02 Scroll Vents & Registers
Pg. 04 Flat Vents & Registers
Pg. 05 Domed Vents
Pg. 06 Lever & Knob Options
Pg. 07 Passage & Privacy Sets
Pg. 10 Tubular Entry Sets
Pg. 11 Mortise Entry Sets
Pg. 12 Grip Entry Sets
Pg. 15 Multi Point Trim Sets
Pg. 16 Grip Handles & Plates
Pg. 17 Appliance & Drawer Pulls
Pg. 18 Cabinet Knobs
Pg. 19 Cabinet Pulls
Pg. 20 Coat Hooks
Pg. 21 Bath Accesories
Pg. 24 Electrical Plates
Pg. 25 Numerals
Pg. 26 Pocket Door & Window Hardware
Pg. 27 Knockers, Mail Slots & Bell Plates
Pg. 28 Additional Hardware
Special Finishes
Bronze Patina
Dark
Natural Bronze
Antique
Natural Bronze
Polished Nickel
Silver Nickel
Polished Brass
Silver Nickel
Antique
Special finishes incur 20% up-charge - 6-8 week lead time
Brushed Nickel
This contains a sampling of our standard stock sizes in our scroll vents & registers.
For our complete line or for custom sizes please contact us or visit us online at www.hamiltonsinkler.com.
R
U
S
T
I
C
Scroll Vents & Registers
Scroll Floor Vents HVT
(louver; no screw holes)
SKU
HVT-210-BP HVT-212-BP HVT-214-BP Duct Size
2” x 10”
2” x 12”
2” x 14”
HVT-310-BP HVT-408-BP HVT-410-BP
HVT-412-BP HVT-414-BP 3” x 10”
4” x 8”
4” x 10”
4” x 12”
4” x 14”
HVT-606-BP HVT-608-BP HVT-610-BP HVT-612-BP HVT-614-BP HVT-616-BP HVT-618-BP 6” x 6”
6” x 8”
6” x 10”
6” x 12”
6” x 14”
6” x 16”
6” x 18”
HVT-810-BP HVT-812-BP HVT-814-BP HVT-816-BP 8” x 10”
8” x 12”
8” x 14”
8” x 16”
The most accurate way to determine the
size of the register you need is to measure
the duct itself.
HVT-1010-BP 10” x 10”
HVT-1012-BP 10” x 12”
HVT-1014-BP 10” x 14”
HVT-1212-BP 12” x 12”
HVT-1214-BP 12” x 14”
Overall vent size is approx.
1-1/2” in both length and width
over the duct size.
For specifications see pages 101 through 103
02
Scroll Registers RVT
(louver; with screw holes)
SKU
WVT-210-BP
WVT-212-BP WVT-214-BP Duct Size
2” x 10”
2” x 12”
2” x 14”
WVT-408-BP WVT-410-BP WVT-412-BP WVT-414-BP 4” x 8”
4” x 10”
4” x 12”
4” x 14”
WVT-606-BP WVT-608-BP WVT-610-BP WVT-612-BP WVT-614-BP WVT-616-BP WVT-618-BP WVT-620-BP WVT-622-BP 6” x 6”
6” x 8”
6” x 10”
6” x 12”
6” x 14”
6” x 16”
6” x 18”
6” x 20”
6” x 22”
WVT-808-BP WVT-810-BP WVT-812-BP WVT-814-BP 8” x 8”
8” x 10”
8” x 12”
8” x 14”
(no louver; with screw holes)
WVT-1010-BP 10” x 10”
WVT-1012-BP 10” x 12”
WVT-1014-BP 10” x 14”
WVT-1212-BP 12” x 12”
WVT-1214-BP 12” x 14”
WVT-1414-BP 14” x 14”
For specifications see pages 101 through 103
03
SKU
RVT-616-BP RVT-618-BP RVT-620-BP RVT-624-BP RVT-630-BP Duct Size
6” x 16”
6” x 18”
6” x 20”
6” x 24”
6” x 30”
RVT-820-BP RVT-824-BP RVT-826-BP RVT-830-BP RVT-836-BP 8” x 20”
8” x 24”
8” x 26”
8” x 30”
8” x 36”
RVT-1016-BP RVT-1020-BP RVT-1024-BP RVT-1026-BP RVT-1032-BP 10” x 16”
10” x 20”
10” x 24”
10” x 26”
10” x 32”
RVT-1218-BP RVT-1220-BP RVT-1224-BP 12” x 18”
12” x 20”
12” x 24”
RVT-1313-BP RVT-1414-BP RVT-1416-BP RVT-1420-BP RVT-1424-BP RVT-1430-BP 13” x 13”
14” x 14”
14” x 16”
14” x 20”
14” x 24”
14” x 30”
RVT-1616-BP RVT-1630-BP RVT-1818-BP RVT-1830-BP RVT-2121-BP RVT-2430-BP 16” x 16”
16” x 30”
18” x 18”
18” x 30”
21” x 21”
24” x 30”
T
R
Scroll Wall Vents WVT
U
S
This contains a sampling of our standard stock sizes in our scroll vents & registers.
For our complete line or for custom sizes please contact us or visit us online at www.hamiltonsinkler.com.
I
C
Scroll Vents & Registers
This contains a sampling of our standard stock sizes in flat vents & registers.
For our complete line or for custom sizes please contact us or visit us online at www.hamiltonsinkler.com.
Flat Wall Vents
S
T
I
C
Flat Vents & Registers
R
U
(louver; with screw holes)
Flat Floor Vents
(louver; no screw holes)
SKU
HVF-210-BP HVF-212-BP HVF-214-BP Duct Size
2” x 10”
2” x 12”
2” x 14”
HVF-310-BP HVF-408-BP HVF-410-BP HVF-412-BP HVF-414-BP 3” x 10”
4” x 8”
4” x 10”
4” x 12”
4” x 14”
HVF-608-BP HVF-610-BP HVF-612-BP HVF-614-BP 6” x 8”
6” x 10”
6” x 12”
6” x 14”
HVF-812-BP HVF-814-BP 8” x 12”
8” x 14”
SKU
WVF-210-BP WVF-212-BP WVF-214-BP Duct Size
2” x 10”
2” x 12”
2” x 14”
WVF-310-BP WVF-408-BP WVF-410-BP WVF-412-BP WVF-414-BP 3” x 10”
4” x 8”
4” x 10”
4” x 12”
4” x 14”
WVF-606-BP WVF-610-BP WVF-612-BP WVF-614-BP 6” x 6”
6” x 10”
6” x 12”
6” x 14”
WVF-808-BP WVF-812-BP WVF-814-BP 8” x 8”
8” x 12”
8” x 14”
WVF-1010-BP WVF-1012-BP WVF-1212-BP WVF-1414-BP 10” x 10”
10” x 12”
12” x 12”
14” x 14”
Flat Registers RVF
(no louver; with screw holes)
SKU
RVF-620-BP RVF-808-BP RVF-824-BP HVF-1212-BP 12” x 12”
Duct Size
6” x 20”
8” x 8”
8” x 24”
RVF-1024-BP 10” x 24”
RVF-1414-BP 14” x 14”
RVF-1818-BP 18” x 18”
Overall vent sizes are approx.
1-1/2” in both length and width
over the duct size.
For specifications see pages 104 through 105
04
T
R
U
S
This contains a sampling of our standard stock sizes in domed vents.
For our complete line or for custom sizes please contact us or visit us online at www.hamiltonsinkler.com.
I
C
Domed Vents
Domed Floor Vents
(louver; no screw holes)
The most accurate way to
determine the size of the
register you need is to measure
the duct itself.
Overall vent sizes are approx.
1-1/2” in both length and width
over the duct size.
SKU
HVD-210-BP HVD-212-BP HVD-214-BP Duct Size
2” x 10”
2” x 12”
2” x 14”
HVD-310-BP 3” x 10”
HVD-410-BP HVD-412-BP HVD-414-BP HVD-418-BP 4” x 10”
4” x 12”
4” x 14”
4” x 18”
For specifications see pages 104 through 105
05
C
I
Our door hardware sets are compatible with any of these levers or knobs.
Please include your lever or knob selection when ordering.
R
U
S
T
Lever & Knob Options
H1-BP
Washington Lever
H2-BP
Adams Lever
H3-BP
Jefferson Lever
H4-BP
Madison Lever
H5-BP
Monroe Lever
H6-BP
Jackson Lever
H7-BP
Lincoln Lever
H8-BP
Grant Lever
H9-BP
Harrison Lever
H10-BP
Wilson Oval Knob
H12-BP
Cleveland Lever
H11-BP
McKinley Round Knob
H14-BP
Kennedy Lever
For specifications see pages 106 through 119
06
H16-BP
Roosevelt Lever
C
I
R
U
S
Please always provide door thickness, backset and door handing.
Though shown with H-12 Cleveland Lever sets are compaitble with any lever or knob.
All trims fit up to a 2-1/8” bore. Specify extended strike.
T
Passage, Privacy & Dummy Sets
2-1/2” x 2-1/2”
SKU
Type
PA-11-BP Passage
PA-11PR-BP Privacy
PA-11D-BP Dummy Set
PA-11SD-BP Single Dummy
2-1/2” x 11”
SKU
Type
PA-03-BP Passage
PA-03PR-BP Privacy
PA-03D-BP Dummy Set
PA-03SD-BP Single Dummy
PA-03M-BP Mortise Passage
PR-03MB Mortise Privacy
2-1/2” x 4-1/2”
SKU
Type
PA-01-BP Passage
PA-01PR-BP Privacy
PA-01D-BP Dummy Set
PA-01SD-BP Single Dummy
DEADBOLT PRIVACY
2-1/2” x 8”
SKU
Type
PA-02-BP Passage
PA-02PR-BP Privacy
PA-02D-BP Dummy Set
PA-02SD-BP Single Dummy
PA-02M-BP Mortise Passage
PR-02MB-BP Mortise Privacy
Deadbolt Privacies are available in two sizes:
PR-02AB-BP (2-1/2” x 8”) 3-1/2” spacing
PR-03AB-BP (2-1/2” x 11”) 5-1/2” spacing
For specifications see pages 120 through 124 and page 132
07
C
I
Please always provide door thickness, backset and door handing.
Though shown with H-12 Cleveland Lever sets are compaitble with any lever or knob.
All trims fit up to a 2-1/8” bore. Specify extended strike.
R
U
S
T
Passage, Privacy & Dummy Sets
2-1/2” x 5-1/2”
SKU
Type
PA-04-BP Passage
PA-04PR-BP Privacy
PA-04D-BP Dummy Set
PA-04SD-BP Single Dummy
2-1/2” x 12”
SKU
Type
PA-06-BP Passage
PA-06PR-BP Privacy
PA-06D-BP Dummy Set
PA-06SD-BP Single Dummy
PA-06M-BP Mortise Passage
PR-06MB-BP Mortise Privacy
DEADBOLT PRIVACY
2-1/2” x 9”
SKU
Type
PA-05-BP Passage
PA-05PR-BP Privacy
PA-05D-BP Dummy Set
PA-05SD-BP Single Dummy
PA-05M-BP Mortise Passage
PR-05MB-BP Mortise Privacy
Deadbolt Privacies are available in two sizes:
PR-05AB-BP (2-1/2” x 9”) 3-1/2” sopacing
PR-06AB-BP (2-1/2” x 12”) 5-1/2” spacing
For specifications see pages 125 through 128 and page 132
08
C
I
U
S
Please always provide door thickness, backset and door handing.
Though shown with H-12 Cleveland Lever sets are compaitble with any lever or knob.
All trims fit up to a 2-1/8” bore. Specify extended strike.
T
Passage, Privacy & Dummy Sets
R
2-1/2” Diam.
SKU
Type
PA-08-BP Passage
PA-08PR-BP Privacy
PA-08D-BP Dummy Set
PA-08SD-BP Single Dummy
2-5/8” x 9”
SKU
Type
PA-09-BP Passage
PA-09PR-BP Privacy
PA-09D-BP Dummy Set
PA-09SD-BP Single Dummy
2-1/2” x 5”
SKU
Type
PA-07-BP Passage
PA-07PR-BP Privacy
PA-07D-BP Dummy Set
PA-07SD-BP Single Dummy
DEADBOLTS
Single Cylinder
DTC-210S-BP
DTC-211S-BP
DTC-212S-BP
Double Cylinder
DTC-210D-BP
DTC-211D-BP
For specifications see pages 129 through 135
09
DTC-212D-BP
Please always provide door thickness, backset and door handing.
Though shown with H-12 Cleveland Lever sets are compaitble with any lever or knob.
All trims fit up to a 2-1/8” bore. Specify extended strike.
R
U
S
T
I
C
Tubular Entry Sets
Tubular Entry Profile
2-1/2” x 11”
EN-03AC-BP
5-1/2” spacing
2-1/2” x 8”
2-1/2” x 12”
2-1/2” x 9”
EN-02AC-BP
3-1/2” spacing
EN-06AC-BP
5-1/2” spacing
EN-05AC-BP
3-1/2” spacing
For specifications see pages 136 through 139
10
T
R
U
S
Please always provide door thickness, backset and door handing.
Though shown with H-12 Cleveland Lever sets are compaitble with any lever or knob.
Specify extended strike.
I
C
Mortise Entry Sets
2-1/2” x 11”
Mortise Entry Profile
EN-03MB-BP
2-1/2” x 8”
2-1/2” x 12”
2-1/2” x 9”
EN-02AB-BP
EN-06MB-BP
EN-05AB-BP
For specifications see pages 140 through 143
11
C
I
Please always provide door thickness, backset and door handing.
Though shown with H-12 Cleveland Lever sets are compaitble with any lever or knob.
Specify extended strike.
R
U
S
T
Mortise Grip Entry
Mortise
18” x 3” Overall
SKU
Type
EN-15D-BP Dummy
18” x 3” Overall
SKU
Type
EN-15AB-BP Mortise
inside plate:
2-3/4” x 9”
Our Oval Style Entries
are currently only available
for use with a mortised lock.
18” x 3” Overall Exterior
Fixture
SKU
Type
EN-1509-BP Mortise
EN-1509D-BP Dummy
For specifications see pages 144 through 146
12
T
R
U
S
Please always provide door thickness, backset and door handing.
Though shown with H-12 Cleveland Lever sets are compaitble with any lever or knob.
All trims fit up to a 2-1/8” bore. Specify extended strike. Tubular sets are spaced at 5-1/2”.
I
C
Mortise & Tubular Grip Entry
inside plate:
2-1/2” x 11”
Exterior Plate: 18” x 3”
SKU
Type
EN-1803-BP Mortise
TEN-1803-BP Tubular
EN-1803D-BP Mortise Dummy
TEN-1803D-BP Tubular Dummy
18” x 3” Plates
SKU Type
EN-18AB-BP Mortise
TEN-18AB-BP Tubular
Exterior Plate: 22” x 3-1/2”
SKU
Type
EN-2203-BP Mortise TEN-2203-BP Tubular
EN-2203D-BP Mortise Dummy
TEN-2203D-BP Tubular Dummy
22” x 3-1/2” Plates
SKU
Type
EN-22AB-BP Mortise
TEN-22AB-BP Tubular
Tubular
inside plate:
2-1/2” x 8”
Mortise
Exterior Plate: 18” x 3”
SKU
Type
EN-1802-BP Mortise
EN-1802D Mortise Dummy
18” x 3” Plates
SKU
Type
EN-18D-BP Mortise Dummy
TEN-18D-BP Tubular Dummy
Exterior Plate: 22” x 3-1/2”
SKU
Type
EN-2202-BP Mortise
EN-2202D Mortise Dummy
22” x 3-1/2” Plates
SKU
Type
EN-22D-BP Mortise Dummy
TEN-22D-BP Tubular Dummy
For specifications see pages 147 and 149
13
C
I
Please always provide door thickness, backset and door handing.
Though shown with H-12 Cleveland Lever sets are compaitble with any lever or knob.
All trims fit up to a 2-1/8” bore. Specify extended strike. Tubular sets are spaced at 5-1/2”.
R
U
S
T
Mortise & Tubular Grip Entry
inside plate:
2-1/2” x 12”
Exterior Plate: 19” x 3”
SKU
Type
EN-1906-BP Mortise
TEN-1906-BP Tubular
EN-1906D-BP Mortise Dummy
TEN-1906D-BP Tubular Dummy
19” x 3” Plates
SKU
Type
EN-19AB-BP Mortise
TEN-19AB-BP Tubular
Exterior Plate: 23” x 3-1/2”
SKU
Type
EN-2306-BP Mortise TEN-2306-BP Tubular
EN-2306D-BP Mortise Dummy
TEN-2306D-BP Tubular Dummy
23” x 3-1/2” Plate
SKU
Type
EN-23AB-BP Mortise
TEN-23AB-BP Tubular
inside plate:
2-1/2” x 9”
Tubular
Mortise
Exterior Plate: 19” x 3”
SKU
Type
EN-1905-BP Mortise
EN-1905D Mortise Dummy
19” x 3” Plates
SKU
Type
EN-19D-BP Mortise Dummy
TEN-19D-BP Tubular Dummy
Exterior Plate: 23” x 3-1/2”
SKU
Type
EN-2305-BP Mortise
EN-2305D Mortise Dummy
23” x 3-1/2” Plates
SKU
Type
EN-23D-BP Mortise Dummy
TEN-23D-BP Tubular Dummy
For specifications see pages 147 and 149
14
C
Multi-Point Trims
They are available in both
our rectangular and ornate
styles in either
Euro Profile or
American Cylinder.
Please contact our
Architectural Department
for more information on
this product at
(866) 900-3326
AMERICAN
CYLINDER
NON
KEYED
EURO PROFILE
For specifications see pages 151 through 153
15
R
Our Multi-Point trims are
available for various
door thickensses and
have been fitted for
many door manufacturers.
U
S
T
I
Please always provide door thickness, backset and door handing.
R
U
S
T
I
C
Grip Handles & Plates
SKU
OPP-04-BP OPP-05-BP OPP-06-BP OPP-19-BP OPP-23-BP 1/2” Thick Plate
Width Length
2-1/2” 5-1/2”
2-1/2” 9”
2-1/2” 12”
3”
19”
3-1/2” 23” SKU OPP-300-BP OPP-301-BP OPP-302-BP 5/16” Thick Plate
Width Length
2-3/4” 12” 2-3/4” 15” 2-3/4” 18” GH-011-BP (12”)
GH-021-BP (10”)
GH-012-BP (15”)
GH-022-BP (12”)
GH-013-BP (18”)
GH-023-BP (15”)
GH-024-BP (18”)
Grip by Grip Mounting
2% upcharge and lead times apply
Grip Mounting to Plate
$65.00 fee and lead times apply
SKU
RPP-01-BP RPP-02-BP RPP-03-BP RPP-18-BP RPP-22-BP 1/2” Thick Plate
Width Length
2-1/2” 4-1/2” 2-1/2” 8” 2-1/2” 11” 3”
18”
3-1/2” 22”
SKU
RPP-300-BP RPP-301-BP RPP-302-BP 5/16” Thick Plate
Width Length
2-3/4” 12”
2-3/4” 15”
2-3/4” 18”
GH-031-BP (10”)
GH-041-BP (6-1/2”)
GH-032-BP (12”)
GH-042-BP (8-1/2”)
GH-033-BP (15”)
GH-043-BP (10-1/2”)
GH-034-BP (18”)
GH-044-BP (12-1/2”)
GH-045-BP (15”)
For specifications see pages 154 through 159
16
R
U
S
T
I
C
Appliance & Drawer Pulls
AP-111.15-BP (15”)
AP-112.15-BP (15”)
AP-113.15-BP (15”)
AP-114.15-BP (15”)
AP-111.18-BP (18”)
AP-112.18-BP (18”)
AP-113.18-BP (18”)
AP-114.18-BP (18”)
AP-111.24-BP (24”)
AP-112.24-BP (24”)
AP-113.24-BP (24”)
AP-114.24-BP (24”)
AP-111.30-BP (30”)
AP-112.30-BP (30”)
AP-113.30-BP (30”)
AP-114.30-BP (30”)
DP-111.3-BP (3”)
DP-112.3-BP (3”)
DP-113.3-BP (3”)
DP-114.3-BP (3”)
DP-111.4-BP (4”)
DP-112.4-BP (4”)
DP-113.4-BP (4”)
DP-114.4-BP (4”)
DP-111.6-BP (6”)
DP-112.6-BP (6”)
DP-113.6-BP (6”)
DP-114.6-BP (6”)
DP-111.12-BP (12”)
DP-112.12-BP (12”)
DP-113.12-BP (12”)
DP-114.12-BP (12”)
For specifications see pages 207 through 210
17
T
I
C
Cabinet Knobs
CK-143-BP (1”)
BK-146-BP (1-1/4”)
CK-142-BP (1-1/4”)
BK-145-BP (1-1/2”)
CK-141-BP (1-1/2”)
R
U
S
BK-147-BP (1”)
DK-163-BP (1-1/4”)
FN-156-BP (1-1/4”)
EK-166-BP (1-1/4”)
NK-151-BP (1-1/4”)
SK-151-BP (1”)
OK-157-BP (1”)
SK-152-BP (1-1/4”)
OK-158-BP (1-1/4”)
SK-153-BP (1-1/2”)
OK-159-BP (1-1/2”)
SKB-202-BP
(1-5/8”)
RKB-201-BP
(1-5/8”)
For specifications see pages 188 through 196
18
OKB-203-BP
(2”)
OKB-204-BP
(2-1/2”)
R
U
S
T
I
C
Cabinet Pulls
MCP-121-BP
3-1/2” x 2-1/4”
BP-134-BP
4” rear mount
BP-133-BP
3” rear mount
BP-136-BP
1-1/4”
BP-135-BP
3” surface mount
BP-137-BP
1-1/4”
BP-138-BP
2-1/2” single screw mount
CDP-121-BP
3”
CDP-122-BP
3”
For specifications see pages 197 through 203
19
CDP-123-BP
4”
R
U
S
T
I
C
Coat Hooks
CH-101-BP
CH-102-BP
CH-103-BP
CH-105-BP
CH-106-BP
CH-107-BP
CH-108-BP
CH-112-BP
CH-125-BP
For specifications see pages 185 through 187
20
U
S
T
I
C
Towel Bars & Rings
BATBS18-OP-BP (18”)
R
BATBS24-OP-BP (24”)
BATBS30-OP-BP (30”)
BATBS18-RP-BP (18”)
BATBS24-RP-BP (24”)
BATBS30-RP-BP (30”)
BATBS18-SP-BP (18”)
BATBS24-SP-BP (24”)
BATBS30-SP-BP (30”)
BATRS-OP-BP
BATRS-RP-BP
For specifications see pages 164 through 169
21
BATRS-SP-BP
U
S
T
I
C
Towel Racks
R
Out Towel Racks
are available
in 18”, 24” and 30”
lengths with
a choice of our
three decorative
backplates.
BATRK18-OP-BP (18”)
BATRK18-RP-BP (18”)
BATRK18-SP-BP (18”)
BATRK24-OP-BP (24”)
BATRK24-RP-BP (24”)
BATRK24-SP-BP (24”)
BATRK30-OP-BP (30”)
BATRK30-RP-BP (30”)
BATRK30-SP-BP (30”)
For specifications see pages 170 through 172
22
C
R
U
S
T
I
Paper Holders & Robe Hooks
BATPS-OP-BP
BATPS-RP-BP
BATPS-SP-BP
BARHS-OP-BP
BARHS-RP-BP
For specifications see pages 173 through 178
23
BARHS-SP-BP
U
S
T
I
C
Electrical Plates
SP-107-BP
SP-105-BP
R
SP-101-BP
SP-102-BP
SP-202-BP
SP-301-BP
SP-401-BP
Switchplates also available in 5 (SP-501-BP), 6 (SP-601-BP) and 7 (SP-701-BP)
SP-103-BP
SP-203-BP
SP-402-BP
SP-302-BP
Decora also available in 5 (SP-502-BP), 6 (SP-602-BP) and 7 (SP-702-BP)
SP-104-BP
SP-204-BP
SP-205-BP
SP-206-BP
SP-303-BP
For specifications see pages 160 through 163
24
SP-304-BP
SP-403-BP
HN-401-BP (4”)
HN-402-BP (4”)
HN-403-BP (4”)
HN-601-BP (6”)
HN-602-BP (6”)
HN-603-BP (6”)
HN-404-BP (4”)
HN-405-BP (4”)
HN-604-BP (6”)
HN-605-BP (6”)
HN-406-BP (4”)
HN-407-BP (4”)
HN-408-BP (4”)
HN-606-BP (6”)
HN-607-BP (6”)
HN-608-BP (6”)
HN-409-BP (4”)
HN-400-BP (4”)
HN-609-BP (6”)
HN-600-BP (6”)
For specifications see page 184
25
R
U
S
T
I
C
Numerals
R
U
S
T
I
C
Pocket Door Hardware
FDP-301-BP (4”)
FDP-311-BP (5”)
FDP-302-BP (8”)
FDP-312-BP (9”)
DEP-206-BP (6”)
DEP-205-BP (4”)
Window Hardware
SL-101-BP (2”)
SL-105-BP
SL-102-BP (4-1/2”)
For specifications see pages 211 through 216
26
SL-110-BP
C
R
U
S
T
I
Knockers, Mail Slots & Bell Pushes
Lion Door Knocker
Classic Mail Slot
LDK-304-BP (5”)
MS-302-BP (10” X 3”)
LDK-305-BP (6-1/2”)
MS-302.13-BP (13” X 3-1/2”)
Ring Knocker
‘LETTERS’ Mail Slot
DRP-302-BP (3-3/4”)
MS-301-BP (10” X 3”)
DRP-303-BP (5-1/2”)
MS-301.13-BP (13” X 3-1/2”)
DBP-104-BP (2-1/2”)
DBP-102-BP (3”)
DBP-101-BP (1-3/4”)
For specifications see pages 179 through 183
27
DBP-103-BP (2-1/2”)
T
I
C
Additional Hardware
R
U
S
Clavos
Shelf Bracket
CL-151-BP (1”)
CL-143-BP (1”)
CL-152-BP (1-1/4”)
CL-142-BP (1-1/4”)
CL-153-BP (1-1/2”)
CL-141-BP (1-1/2”)
SB-405-BP (4” X 5”)
SB-709-BP (7” X 9”)
SB-1013-BP (10” X 13”)
Dummy Strap Hinge
DSH-203.8-BP (8-1/2”)
DSH-203.10-BP (10”)
Door Stops
DSH-203.13-BP (13”)
DSH-203.15-BP (15”)
Tower Bolt
DS-102-BP
TB-201-BP (12”)
Door Cabin Hooks
DCH-201-BP (approx 3”)
DCH-202-BP (approx 6”)
DCH-203-BP (approx 10”)
DS-101-BP
For specifications see pages 217 through 222
28
C O N T E M P O R A RY
CONTEMPORARY COLLECTION
Our stock line of goods in
Brushed Nickel Finish.
Scroll Vents & Registers 02
Flat Vents & Registers 04
Domed Vents 05
Appliance & Drawer Pulls 06
Cabinet Knobs 07
Cabinet Pulls 08
Coat Hooks 09
Towel Bars & Rings 10
Towel Racks 11
Paper Holders & Robe Hooks 12
Electrical Plates 13
Numerals 14
Pocket Door and Window Hardware 15
Knockers, Mail Slots & Bell Plates 16
Additional Hardware 17
Strathmore Vents 18
Additional finishes available via special order:
20% up-charge applies - 6-8 week lead time
Bronze Patina Dark / Natural Bronze Antique / Natural Bronze /
Silver Nickel / Silver Nickel Antique / Polished Nickel / Brushed Nickel
Scroll Vents & Registers
This contains a sampling of our standard stock sizes in our scroll vents & registers.
For our complete line or for custom sizes please contact us or visit us online at www.hamiltonsinkler.com.
Scroll Floor Vents HVT
C O N T E M P O R A RY
(louver; no screw holes)
SKU
HVT-210-BN HVT-212-BN
HVT-214-BN
Duct Size
2” x 10”
2” x 12”
2” x 14”
HVT-310-BN HVT-408-BN
HVT-410-BN
HVT-412-BN
HVT-414-BN
3” x 10”
4” x 8”
4” x 10”
4” x 12”
4” x 14”
HVT-606-BN
HVT-608-BN
HVT-610-BN
HVT-612-BN
HVT-614-BN
HVT-616-BN
HVT-618-BN
6” x 6”
6” x 8”
6” x 10”
6” x 12”
6” x 14”
6” x 16”
6” x 18”
HVT-810-BN
HVT-812-BN
HVT-814-BN
HVT-816-BN
8” x 10”
8” x 12”
8” x 14”
8” x 16”
The most accurate way to determine the
size of the register you need is to measure
the duct itself.
HVT-1010-BN 10” x 10”
HVT-1012-BN 10” x 12”
HVT-1014-BN 10” x 14”
HVT-1212-BN 12” x 12”
HVT-1214-BN 12” x 14”
Overall vent size is approx.
1-1/2” in both length and width
over the duct size.
For specifications see pages 101 through 103
02
Scroll Vents & Registers
This contains a sampling of our standard stock sizes in our scroll vents & registers.
For our complete line or for custom sizes please contact us or visit us online at www.hamiltonsinkler.com.
Scroll Registers RVT
Scroll Wall Vents WVT
SKU
WVT-210-BN
WVT-212-BN WVT-214-BN Duct Size
2” x 10”
2” x 12”
2” x 14”
WVT-408-BN WVT-410-BN
WVT-412-BN
WVT-414-BN
4” x 8”
4” x 10”
4” x 12”
4” x 14”
WVT-606-BN WVT-608-BN
WVT-610-BN
WVT-612-BN
WVT-614-BN
WVT-616-BN
WVT-618-BN
WVT-620-BN
WVT-622-BN
6” x 6”
6” x 8”
6” x 10”
6” x 12”
6” x 14”
6” x 16”
6” x 18”
6” x 20”
6” x 22”
WVT-808-BN
WVT-810-BN
WVT-812-BN
WVT-814-BN
8” x 8”
8” x 10”
8” x 12”
8” x 14”
SKU
RVT-616-BN RVT-618-BN
RVT-620-BN
RVT-624-BN
RVT-630-BN
Duct Size
6” x 16”
6” x 18”
6” x 20”
6” x 24”
6” x 30”
RVT-820-BN
RVT-824-BN
RVT-826-BN
RVT-830-BN
RVT-836-BN
8” x 20”
8” x 24”
8” x 26”
8” x 30”
8” x 36”
RVT-1016-BN RVT-1020-BN
RVT-1024-BN
RVT-1026-BN
RVT-1032-BN
10” x 16”
10” x 20”
10” x 24”
10” x 26”
10” x 32”
RVT-1218-BN 12” x 18”
RVT-1220-BN 12” x 20”
RVT-1224-BN 12” x 24”
WVT-1010-BN 10” x 10”
WVT-1012-BN 10” x 12”
WVT-1014-BN 10” x 14”
WVT-1212-BN 12” x 12”
WVT-1214-BN 12” x 14”
WVT-1414-BN 14” x 14”
RVT-1313-BN RVT-1414-BN
RVT-1416-BN
RVT-1420-BN
RVT-1424-BN
RVT-1430-BN
13” x 13”
14” x 14”
14” x 16”
14” x 20”
14” x 24”
14” x 30”
RVT-1616-BN
RVT-1630-BN
RVT-1818-BN
RVT-1830-BN
RVT-2121-BN
RVT-2430-BN
16” x 16”
16” x 30”
18” x 18”
18” x 30”
21” x 21”
24” x 30”
For specifications see pages 101 through 103
03
C O N T E M P O R A RY
(no louver; screw holes)
(louver; screw holes)
Flat Vents & Registers
This contains a sampling of our standard stock sizes in flat vents & registers.
For our complete line or for custom sizes please contact us or visit us online at www.hamiltonsinkler.com.
Flat Wall Vents
C O N T E M P O R A RY
Overall vent size is approx.
1-1/2” in both length and width
over the duct size.
(louver; screw holes)
Flat Floor Vents
(louver; no screw holes)
SKU
WVF-210-BN WVF-212-BN
WVF-214-BN
Duct Size
2” x 10”
2” x 12”
2” x 14”
SKU
HVF-210-BN HVF-212-BN
HVF-214-BN
Duct Size
2” x 10”
2” x 12”
2” x 14”
WVF-310-BN
WVF-408-BN
WVF-410-BN
WVF-412-BN
WVF-414-BN
3” x 10”
4” x 8”
4” x 10”
4” x 12”
4” x 14”
HVF-310-BN HVF-408-BN
HVF-410-BN
HVF-412-BN
HVF-414-BN
3” x 10”
4” x 8”
4” x 10”
4” x 12”
4” x 14”
WVF-606-BN
WVF-610-BN
WVF-612-BN
WVF-614-BN
6” x 6”
6” x 10”
6” x 12”
6” x 14”
HVF-608-BN HVF-610-BN
HVF-612-BN
HVF-614-BN
6” x 8”
6” x 10”
6” x 12”
6” x 14”
WVF-808-BN
WVF-812-BN
WVF-814-BN
8” x 8”
8” x 12”
8” x 14”
HVF-812-BN
HVF-814-BN
8” x 12”
8” x 14”
WVF-1010-BN WVF-1012-BN
WVF-1212-BN
WVF-1414-BN
10” x 10”
10” x 12”
12” x 12”
14” x 14”
HVF-1212-BN 12” x 12”
Flat Registers RVF
(no louver; screw holes)
SKU
RVF-620-BN RVF-808-BN
RVF-824-BN
The most accurate way to
determine the size of the
register you need is to measure
the duct itself.
Duct Size
6” x 20”
8” x 8”
8” x 24”
RVF-1024-BN 10” x 24”
RVF-1414-BN 14” x 14”
RVF-1818-BN 18” x 18”
For specifications see pages 104 through 105
04
Domed Vents
C O N T E M P O R A RY
This contains a sampling of our standard stock sizes in domed vents.
For our complete line or for custom sizes please contact us or visit us online at www.hamiltonsinkler.com.
Domed Floor Vents
(louver; no screw holes)
The most accurate way to
determine the size of the
register you need is to measure
the duct itself.
Overall vent size is approx.
1-1/2” in both length and width
over the duct size.
SKU
HVD-210-BN HVD-212-BN
HVD-214-BN
Duct Size
2” x 10”
2” x 12”
2” x 14”
HVD-310-BN
3” x 10”
HVD-410-BN
HVD-412-BN
HVD-414-BN
HVD-418-BN
4” x 10”
4” x 12”
4” x 14”
4” x 18”
For specifications see pages 104 through 105
05
C O N T E M P O R A RY
Appliance & Drawer Pulls
AP-111.15-BN (15”)
AP-112.15-BN (15”)
AP-113.15-BN (15”)
AP-114.15-BN (15”)
AP-111.18-BN (18”)
AP-112.18-BN (18”)
AP-113.18-BN (18”)
AP-114.18-BN (18”)
AP-111.24-BN (24”)
AP-112.24-BN (24”)
AP-113.24-BN (24”)
AP-114.24-BN (24”)
AP-111.30-BN (30”)
AP-112.30-BN (30”)
AP-113.30-BN (30”)
AP-114.30-BN (30”)
DP-111.3-BN (3”)
DP-112.3-BN (3”)
DP-113.3-BN (3”)
DP-114.3-BN (3”)
DP-111.4-BN (4”)
DP-112.4-BN (4”)
DP-113.4-BN (4”)
DP-114.4-BN (4”)
DP-111.6-BN (6”)
DP-112.6-BN (6”)
DP-113.6-BN (6”)
DP-114.6-BN (6”)
DP-111.12-BN (12”)
DP-112.12-BN (12”)
DP-113.12-BN (12”)
DP-114.12-BN (12”)
For specifications see pages 207 through 210
06
DK-163-BP (1-1/4”)
BK-147-BP (1”)
CK-143-BP (1”)
BK-146-BP (1-1/4”)
CK-142-BP (1-1/4”)
BK-145-BP (1-1/2”)
CK-141-BP (1-1/2”)
FN-156-BP (1-1/4”)
EK-166-BP (1-1/4”)
NK-151-BP (1-1/4”)
SK-151-BP (1”)
OK-157-BP (1”)
SK-152-BP (1-1/4”)
OK-158-BP (1-1/4”)
SK-153-BP (1-1/2”)
OK-159-BP (1-1/2”)
SKB-202-BP
(1-5/8”)
RKB-201-BP
(1-5/8”)
For specifications see pages 188 through 196
07
OKB-203-BP
(2”)
OKB-204-BP
(2-1/2”)
C O N T E M P O R A RY
Cabinet Knobs
C O N T E M P O R A RY
Cabinet Pulls
MCP-121-BN
3-1/2” x 2-1/4”
BP-134-BN
4” rear mount
BP-133-BN
3” rear mount
BP-136-BN
1-1/4”
BP-135-BN
3” surface mount
BP-137-BN
1-1/4”
BP-138-BN
2-1/2” single screw mount
CDP-121-BN
3”
CDP-122-BN
3”
For specifications see pages 197 through 203
08
CDP-123-BN
4”
CH-101-BN
CH-102-BN
CH-103-BN
CH-105-BN
CH-106-BN
CH-107-BN
CH-108-BN
CH-112-BN
CH-125-BN
For specifications see pages 185 through 187
09
C O N T E M P O R A RY
Coat Hooks
Towel Bars & Rings
BATBS18-OP-BN (18”)
BATBS24-OP-BN (24”)
C O N T E M P O R A RY
BATBS30-OP-BN (30”)
BATBS18-RP-BN (18”)
BATBS24-RP-BN (24”)
BATBS30-RP-BN (30”)
BATBS18-SP-BN (18”)
BATBS24-SP-BN (24”)
BATBS30-SP-BN (30”)
BATRS-OP-BN
BATRS-RP-BN
For specifications see pages 164 through 169
10
BATRS-SP-BN
Out Towel Racks
are available
in 18”, 24” and 30”
lengths with
a choice of our
three decorative
backplates.
BATRK18-OP-BN (18”)
BATRK18-RP-BN (18”)
BATRK18-SP-BN (18”)
BATRK24-OP-BN (24”)
BATRK24-RP-BN (24”)
BATRK24-SP-BN (24”)
BATRK30-OP-BN (30”)
BATRK30-RP-BN (30”)
BATRK30-SP-BN (30”)
For specifications see pages 170 through 172
11
C O N T E M P O R A RY
Towel Racks
Paper Holders & Robe Hooks
C O N T E M P O R A RY
BATPS-OP-BN
BATPS-RP-BN
BATPS-SP-BN
BARHS-OP-BN
BARHS-RP-BN
For specifications see pages 173 through 178
12
BARHS-SP-BN
Electrical Plates
SP-102-BN
SP-107-BN
SP-202-BN
SP-105-BN
SP-301-BN
SP-401-BN
Switchplates also available in 5 (SP-501-BN), 6 (SP-601-BN) and 7 (SP-701-BN)
SP-103-BN
SP-203-BN
SP-402-BN
SP-302-BN
Decora also available in 5 (SP-502-BN), 6 (SP-602-BN) and 7 (SP-702-BN)
SP-104-BN
SP-204-BN
SP-205-BN
SP-206-BN
SP-303-BN
For specifications see pages 160 through 163
13
SP-304-BN
SP-403-BN
C O N T E M P O R A RY
SP-101-BN
C O N T E M P O R A RY
Numerals
HN-401-BN (4”)
HN-402-BN (4”)
HN-403-BN (4”)
HN-601-BN (6”)
HN-602-BN (6”)
HN-603-BN (6”)
HN-404-BN (4”)
HN-405-BN (4”)
HN-604-BN (6”)
HN-605-BN (6”)
HN-406-BN (4”)
HN-407-BN (4”)
HN-408-BN (4”)
HN-606-BN (6”)
HN-607-BN (6”)
HN-608-BN (6”)
HN-409-BN (4”)
HN-400-BN (4”)
HN-609-BN (6”)
HN-600-BN (6”)
For specifications see page 184
14
FDP-301-BN (4”)
FDP-311-BN (5”)
FDP-302-BN (8”)
FDP-312-BN (9”)
DEP-206-BN (6”)
DEP-205-BN (4”)
Window Hardware
SL-101-BN (2”)
SL-105-BN
SL-102-BN (4-1/2”)
For specifications see pages 211 through 216
15
SL-110-BN
C O N T E M P O R A RY
Pocket Door Hardware
C O N T E M P O R A RY
Knockers, Mail Slots & Bell Pushes
Lion Door Knocker
Classic Mail Slot
LDK-304-BN (5”)
MS-302-BN (10” X 3”)
LDK-305-BN (6-1/2”)
MS-302.13-BN (13” X 3-1/2”)
Ring Knocker
‘LETTERS’ Mail Slot
DRP-302-BN (3-3/4”)
MS-301-BN (10” X 3”)
DRP-303-BN (5-1/2”)
MS-301.13-BN (13” X 3-1/2”)
DBP-104-BN (2-1/2”)
DBP-102-BN (3”)
DBP-101-BN (1-3/4”)
For specifications see pages 179 through 183
16
DBP-103-BN (2-1/2”)
Shelf Bracket
SB-405-BN (4” X 5”)
SB-709-BN (7” X 9”)
SB-1013-BN (10” X 13”)
DS-102-BN
Door Cabin Hooks
Door Stops
DCH-201-BN (approx 3”)
DCH-202-BN (approx 6”)
DCH-203-BN (approx 10”)
DS-101-BN
For specifications see pages 217 through 222
17
C O N T E M P O R A RY
Additional Hardware
Strathmore Vents
C O N T E M P O R A RY
Our stocked line of non-customizable vents available in 4 finishes.
2-1/4” x 10” shown
in antique brass
2-1/4” x 12” shown
in polished nickel
2-1/4” x 14” shown
in black
4” x 10” shown
in polished brass
4” x 12” shown
in antique brass
4” x 14” shown
in polished brass
6” x 10” shown
in black
6” x 12” shown
in polished nickel
6” x 14” shown
in antique brass
FLOOR:
SKU
Duct Size
SVF-210
SVF-212
SVF-214
2-1/4” X 10”
2-1/4” X 12”
2-1/4” X 14”
SKU
SVF-410
SVF-412
SVF-414
4” X 10”
4” X 12”
4” X 14”
SVW-410
SVW-412
SVW-414
4” X 10”
4” X 12”
4” X 14”
SVF-610
SVF-612
SVF-614
6” X 10”
6” X 12”
6” X 14”
SVW-610
SVW-612
SVW-614
6” X 10”
6” X 12”
6” X 14”
SVW-210
SVW-212
SVW-214
Louvers are pre-attached
with machine screws.
Specify:
BL for BLACK
PN for POLISHED NICKEL
AB for ANTIQUE BRASS
PB for POLISHED BRASS
WALL:
Duct Size
2-1/4” X 10”
2-1/4” X 12”
2-1/4” X 14”
MEASURING INSTRUCTIONS:
To determine the size of your
register measure the opening
in the floor or wall.
18