Catalog – Power Tools 2012

Transcription

Catalog – Power Tools
2012
Electric Powered
Systems
Battery Powered
Systems
Pneumatic
Powered
Systems
2012
CONTENTS
Anspach Products
1-1 to 1-29
Synthes Power Equipment
2-1 to 2-55
Numerical Index
N-1 to N-7
Alphabetical Index
A-1 to A-2
Anspach, eMax, XMax and Synthes are trademarks of Synthes, Inc. or its affiliates.
© 2011 Synthes, Inc. or its affiliates. All rights reserved.
Printed in U.S.A. 11/11
20-0070 rev A.
J10412-A
No extracts or copies of this catalog may be made without the written permission of Synthes, Inc. All Synthes catalogs and price lists
remain the property of Synthes and may only be used in connection with the instruments and implants distributed by Synthes.
1-1
Anspach
Products
Anspach Products
Pneumatic High Performance Instrument Systems
MA Attachments and Dissection Tools
XMax Pneumatic System ............................................ 1-2
Minimal Access Attachments ..................................... 1-20
Black Max Pneumatic System ..................................... 1-2
Pneumatic Instrument System Accessories.................. 1-3
Angle Attachments and Dissection Tools
Powered Irrigation System.......................................... 1-4
Quick Disconnect (QD) Angle Attachments ................ 1-21
iMRI System ............................................................... 1-5
Saw Attachments and Saw Blades
Electric High Performance Instrument System
microSaws ................................................................. 1-23
eMax2 Plus System .................................................... 1-6
Small Attachments: J-latch and Jacobs Chuck ............ 1-24
Sagittal Saws ............................................................. 1-25
Small Bone High Performance Instrument System
Saw Blades ................................................................ 1-26
e12 Electric Instrument System................................... 1-7
Additional Surgical Instruments and Accessories
Anspach Standard Attachments and Dissection Tools
Bone Collector ........................................................... 1-27
Straight Attachments ................................................ 1-8
Compact SpeedReducer............................................. 1-27
Contra and Right Angle Attachments,
Craniotomes, and Specialty Attachments ................... 1-11
Cranial Perforator ...................................................... 1-27
Heavy Duty Attachments............................................ 1-12
Black Max Standard Attachments and Dissection Tools
Couplers .................................................................... 1-28
KAM SuperSucker Disposable Suction Tips/Filters ....... 1-28
Cutting Burr Styles.................................................. 1-29
Straight Attachments ................................................. 1-14
Minimally Invasive Attachments ................................. 1-17
Craniotomes, Specialty, MRA,
and Contra and Right Attachments............................ 1-18
Handpiece Key
XMax
XM
MicroMax Plus
MM
BlackMax
BM
Micro Curved Attachment (MCA) and Dissection Tools
iMRI
iMRI
MCA.......................................................................... 1-19
eMax 2, eMax 2 Plus
EM
e12
E12
Anspach products are manufactured under one or more of the following U.S. Patent Nos. RE 37,358; 5,405,348; 5,601,560; 5,630,818;
5,741,084; 5,904,687; 6,607,533; 6,733,218; 6,746,153; 6,749,341; 6,969,368; 7,128,544; 7,144,415; 7,217,090; 7,255,546;
7,261,526 and 7,458,979. Additional U.S. and International patents pending.
Aesculap is a registered trademark of Aesculap ACI. Midas Rex and Legend are registered trademarks of Medtronics, Inc.
The Synthes Anspach Black Max Instrument System is not sponsored by, endorsed by or otherwise associated with United States
Manufacturing Corp. or its Blackmax prosthetic limbs.
Illustrations not actual size
11/11
1-2
Anspach
Products
XMax Pneumatic System XM
XMAX
XMax Handpiece
Black Max Pneumatic System BM
BLACKMAX-N
BLACKMAX-N-LP
Black Max Swivel/Angle Handpiece
Low Pressure Black Max Handpiece, Swivel Angle
11/11
1-3
MOTOR-CASE*
XM-CASE
MM-CASE-TRAY
B-CASE-TRAY
MM-CTR-RACK
AUTOLUBE-III
AUTOLUBE-III-DISS
AUTOLUBE-III-20
AL-III-DISS-20
AL-III-30
AL-III-DISS-30
AUTOLUBE-III-MA7
AUTOLUBE-III-IRR
AUTOLUBE-III-FG
AUTOLUBE-III-FG7
AUTOLUBE-III-NK
AL-III-IRR-MA7
ACB
OIL-II
B-OIL
FILTER-II
PG
SCHRADER-F
Handpiece Sterilization Case
XMax Sterilization Case & Tray
microMax Plus Sterilization Case & Tray
Black Max Sterilization Tray with Case
Cutting Burr Rack
Foot Control
Foot Control, DISS Adapter
Foot Control with 20’ Hose
Foot Control with 20’ Hose, DISS Adapter
Foot Control with 30’ Hose
Foot Control with 30’ Hose, DISS Adapter
Foot Control, MA7 Adapter
Foot Control for Irrigation System
Foot Control with Foot Guard
Foot Control with Foot Guard, MA7 Adapter
Foot Control with Nitrogen Keyed Adapter
Foot Control for Irrigation System, MA7 Adapter
Attachment Cleaning Brushes
Instrument Oil w/1 Replacement Filter for AutoLube-II & -III
Instrument Oil w/1 Replacement Filter for AutoLube-I
AutoLube-II and -III Filters (5/Pkg)
Pistol Grip for Black Max
Schrader Adapter
Multiple Outlet Manifold and Hoses
MOM
Multiple Outlet Manifold
HOSE-01
10 Inch Air Extension Hose
HOSE-5
5 Foot Air Extension Hose
HOSE-10
HOSE
HOSEDISS
10 Inch Air Extension Hose with DISS Adapter
HOSE5-DISS
5 Foot Air Extension Hose with DISS Adapter
HOSE-10-DISS
HOSE-15-DISS
HOSE-20-DISS
Extension Hose may be added to any MOM unit intended for use with OR wall outlets.
* Small sterilization case, holds handpiece only
11/11
Anspach
Products
Pneumatic Instrument System Accessories XM MM BM
1-4
Anspach
Products
Powered Irrigation System XM MM BM
Powered Irrigation System
IRR-PUMP-II
Powered Irrigation Pump*
IRRIGATE-TUBE
Sterile Tubing and Hoseclips for Irrigation System (1ea.)
IRRIGATE-TUBE-HF Sterile High Flow Tubing and Hoseclips for Irrigation System (1ea.)
Irrigation Clips XM MM EM
IRR-CLIP-10
Irrigation Clip for SHORT Attachment
IRR-CLIP-20
Irrigation Clip for QD8 and QD8-S Angle Attachments
IRR-CLIP-30
Irrigation Clip for SHORT-HD Attachment
IRR-CLIP-40
Irrigation Clip for MEDIUM-HD and LONG-HD Attachment
IRR-CLIP-50
Irrigation Clip for MEDIUM, LONG, LONG-S, and LONG-01 Attachments
IRR-CLIP-60
Irrigation Clip for QD11, QD11-S, QD14, and QD14-S Angle Attachments
Irrigation Clips BM
IRR-CLIP-20
Irrigation Clip for B-QD8 and B-QD8-S Attachment
IRR-CLIP-30
Irrigation Clip for B-SILVER Attachment
IRR-CLIP-40
Irrigation Clip for B-BLUE-S and B-VIOLET Attachments
IRR-CLIP-50
Irrigation Clip for B-TURQ-L Attachment
IRR-CLIP-60
Irrigation Clip for B-QD11, B-QD11-S, B-QD14, and B-QD14-S Attachments
*In order to operate the Anspach Irrigation Pump, utilize an AUTOLUBE-III-IRR or AL-III-IRR-MA7.
Upgrades to the IRR version are available.
All irrigation clips are supplied sterile and are designed for single use only.
11/11
1-5
IMRI-MOTOR
iMRI Handpiece
IMRI System Accessories
IMRI-FOOT-CTRL iMRI Air Control
IMRI-OIL
iMRI Synthetic Oil
IMRI Attachments
IMRI-SHORT
IMRI-S-4B
IMRI-S-1R
IMRI-S-8NS-M
IMRI-S-1004TD
iMRI Short Attachment
4 mm Fluted Ball
1.4 mm x 12.8 mm Fluted Router
3 mm Fluted Matchstick, extends 8.9 mm, Less Aggressive
1.0 mm x 4.0 mm Twist Drill with Depth Stop
IMRI-SHORT-HD
IMRI-SHD-6B
iMRI Short Heavy Duty Attachment
6 mm Fluted Ball
IMRI-CRANI-A
IMRI-A-CRN
iMRI Adult Craniotome
1.85 mm x 16 mm Fluted Router
11/11
Anspach
Products
iMRI System iMRI
1-6
Anspach
Products
eMax2 Plus System EM
EMAX2PLUS
SC2102
E-FP
E-FP-DIR/IRR
eMax 2 Plus Handpiece
Single Port Console, no Irrigation
Electric Foot Pedal
Electric Foot Pedal, with Direction & Irrigation
Switch
eMax 2 Plus Instrument System Accessories
MOTOR-CASE
Anspach Handpiece Case
EMAX2-HC
Hand Control
EMAX2-TRAY
Sterilization Case & Tray
MM-CTR-RACK Cutting Burr Rack
ACB
Attachment Cleaning Brushes
See Page 1-4 for irrigation accessories.
11/11
1-7
Anspach
Products
e12 Electric Instrument System E12
e12 with the SA-JACOBS attachment
E12
SC2101
E-FP
e12 Electric Handpiece
Single Port Console with Irrigation
Electric Foot Pedal
e12 Instrument System Accessories
E12-HC
e12 Hand Control
11/11
1-8
Anspach
Products
Straight Attachments XM MM EM
Dissection Tools for 5 cm Short Attachment (SHORT)
S-1B
1 mm Fluted Ball, Extended
S-1SB
1 mm Fluted Ball, Standard
S-15B
1.5 mm Fluted Ball, Extended
S-15SB
1.5 mm Fluted Ball, Standard
S-2B
S-2SB
S-2SBT
2 mm Fluted Ball, Tapered, Standard
S-25B
S-25SB
S-3B
S-3SB
S-3SBT
3 mm Fluted Ball, Tapered, Standard
S-35B
S-35SB
S-4B
4 mm Fluted Ball
S-4BT
4 mm Fluted Ball, Tapered
S-5B
5 mm Fluted Ball
S-5B-12F
5 mm Fluted Ball, 12 Flutes
S-6B
6 mm Fluted Ball
S-7B
7 mm Fluted Ball
S-8B
8 mm Fluted Ball
S-9B
9 mm Fluted Ball
S-05D
0.5 mm Diamond Ball, Extended
S-06SD
0.6 mm Diamond Ball, Standard
S-08SD
S-1D
1 mm Diamond Ball, Extended
S-1SD
1 mm Diamond Ball, Standard
S-12D
S-15D
S-15SD
S-2D
S-2SD
S-2SD-120 2 mm Diamond Ball, 120/140 Grit, Standard
S-25D
S-25SD
S-3D
S-3SD
S-3SD-100 3 mm Diamond Ball, 100/120 Grit, Standard
S-35D
S-35SD
3.5mm Diamond Ball, Standard
S-4D
4 mm Diamond Ball
S-4D-100
4 mm Diamond Ball, 100/120 Grit
S-4D-L
4 mm Diamond Ball, Extends 27 mm
S-5D
5 mm Diamond Ball
S-5D-100
S-6D
6 mm Diamond Ball
S-1DC
1 mm Coarse Diamond Ball, Extended
S-1SDC
1 mm Coarse Diamond Ball, Standard
S-15DC
1.5 mm Coarse Diamond Ball, Extended
S-15SDC
1.5 mm Coarse Diamond Ball, Standard
S-15DCT
1.5 mm Coarse Diamond Ball, Tapered, Extended
S-2DC
S-2SDC
S-2SDCT
S-25DC
S-25SDC
S-3DC
S-3SDC
S-3SDCT
2 mm Coarse Diamond Ball, Tapered, Standard
3 mm Coarse Diamond Ball, Tapered,
Standard
S-3SDC-50
3 mm Coarse Diamond Ball, 50/60 Grit,
Standard
S-35DC
S-4DC
4 mm Coarse Diamond Ball
S-5DC
S-5DC-40
5 mm Coarse Diamond Ball, 40/60 Grit
S-6DC
S-8DC
S-4DX
4 mm Extra Coarse Diamond Ball
S-5DX
S-6DX
S-1R
S-6R
S-4OV
4 mm x 8 mm Fluted Oval
S-8N-18
1.8 mm Fluted Matchstick
S-8N
S-8N-L
2.3 mm Fluted Matchstick, Extends 22 mm
S-8NS
3 mm Fluted Matchstick
S-8NS-M
3 mm Fluted Matchstick, Extends 8.9 mm,
Less Aggressive
S-8ND
2.5 mm Diamond Matchstick
S-8NSD
S-5AC
5 mm Fluted Acorn
S-6AC
6 mm Fluted Acorn
S-9AC
9.2 mm Fluted Acorn
S-1203TD
1.2 mm x 3 mm Twist Drill
S-1254TD
Twist Drill for 1.25 mm x 4 mm Screw
S-1504TD
S-1506TD
S-1506TD-M 1.5 mm x 6 mm Fluted Twist Drill
S-1510TD
1.55 mm x 10 mm Fluted Twist Drill
S-2004TD
S-2006TD
S-2433TD
2.4 mm x 3.3 mm Twist Drill
S-6P
6 mm x 9 mm Fluted Pear
S-6IP
6 mm x 11.8 mm Fluted Pear, Inverted
S-7IP
7 mm x 13.1 mm Fluted Pear, Inverted
S-6PD
6 mm x 9 mm Diamond Pear
S-68DRMDC 6.8 mm x 10.6 mm Coarse Diamond Drum
S-68DRMDX 6.8 mm x 10.6 mm Extra Coarse Diamond
Drum
Standard length cutting burrs extend approximately 16 mm from the distal end of the attachment. Extended length cutting
burrs extend approximately 27 mm from the distal end of the attachment.
11/11
1-9
SHORT
5 cm Long Attachment
S-1SB-C
S-2SB-C
S-3SB-C
S-4B-C
S-5B-C
S-6B-C
1 mm Carbide Fluted Ball, Standard
MEDIUM
M-1B
M-1SB
M-2B
M-2SB
M-3B
M-3SB
M-3SB-2
M-4B
M-5B
M-5B-2
M-5B-C
M-6B
M-6B-C
M-7B
M-05D
M-05SD
M-1D
M-1SD
M-15D
M-15SD
M-2D
M-2SD
M-25SD
M-3D
M-3SD
M-35SD
M-4D
M-5D
M-6D
M-1DC
M-1SDC
M-15SDC
3 mm Fluted Ball, 2 mm Shaft Exposure
4 mm Fluted Ball
5 mm Fluted Ball
5 mm Carbide Fluted Ball
6 mm Fluted Ball
7 mm Fluted Ball
4 mm Diamond Ball
5 mm Diamond Ball
6 mm Diamond Ball
1 mm Coarse Diamond Ball , Extended
— continued
Anspach
Products
S-7B-C
S-1B-C
S-2B-C
S-3B-C
S-4BL-C
S-15DRMC
S-15DRMC-L
1 mm Carbide Fluted Ball, Extended
1.5 mm x 7.5 mm Cylindrical Carbide Drum
1.5 mm x 7.5 mm Cylindrical Carbide Drum,
extends 25 mm
M-2DC
M-2SDC
M-3DC
M-3DC-2
3 mm Coarse Diamond Ball,
2 mm Shaft Exposure
6 mm Coarse Diamond Ball,
2 mm Shaft Exposure
6 mm Extra Coarse Diamond Ball, 20/30 Grit
5.5 mm x 10 mm Carbide Fluted Oval
4 mm x 10 mm Diamond Flame
3 mm Fluted Matchstick, Less Aggressive
3 mm Carbide Fluted Matchstick,
Less Aggressive
5 mm Fluted Acorn
7 mm Fluted Acorn
6 mm x 9 mm Fluted Pear
5 mm x 20 mm Fluted Barrel
M-3SDC
M-35SDC
M-4DC
M-5DC
M-6DC
M-6DC-2
M-4DX
M-6DX
M-6DX-20
M-1R
M-4OV
M-56OV
M-58OV
M-5OV
M-55OV-C
M-4FD
M-8N
M-8NS
M-8NS-M
M-8NS-M-C
M-8ND
M-8NSD
M-5AC
M-7AC
M-6P
M-5BA-20
Standard length cutting burrs extend approximately 16 mm from the distal end of the attachment.
Extended length cutting burrs extend approximately 27 mm from the distal end of the attachment.
11/11
1-10
Anspach
Products
LONG-S
LONG
10.5 cm Long Attachment
L-1SB
L-2SB
L-3SB
L-4B
L-4B-C
L-5B
L-5B-C
L-6B
L-7B
L-9B
L-1SD
L-2SD
L-3SD
L-4D
L-5D
L-6D
L-3SDC
L-4DC
L-5DC
L-6DC
L-4DX
L-5DX
L-6DX
L-8DX
L-1R
L-4OV
L-56OV
4 mm Fluted Ball
5 mm Fluted Ball
6 mm Fluted Ball
7 mm Fluted Ball
9 mm Fluted Ball
4 mm Diamond Ball
5 mm Diamond Ball
6 mm Diamond Ball
MIA16
16 cm Minimally Invasive Attachment
MIA16-3SB
MIA16-4B
MIA16-6B
MIA16-4D
MIA16-5D
4 mm Fluted Ball
6 mm Fluted Ball
4 mm Diamond Ball
5 mm Diamond Ball
— continued
L-58OV
L-5OV
L-8N
L-8NS
L-8NS-M
L-7DRC
L-7DRC-11
L-8DRC
L-8DRC-11
L-9DRC
L-10DRC
3 mm Fluted Matchstick,
Less Aggressive
3 mm Carbide Fluted Matchstick,
Less Aggressive
3.2 mm Coarse Diamond Matchstick
5 mm Fluted Acorn
7 mm Fluted Acorn
3.5 mm x 8.4 mm Fluted Drum
4 mm x 8.9 mm Fluted Drum, Side Cut Only
5 mm x 8.4 mm Fluted Drum
5 mm x 14 mm Fluted Drum, Side Cut Only
6.8 mm x 10.6 mm Extra Coarse Diamond
Drum
7 mm x 11 mm Fluted Drum
MIA16-4DC
MIA16-6DC
MIA16-6DX
MIA16-5OV
MIA16-8NS
L-8NS-M-C
L-8ND
L-8NSD
L-8NSDC
L-5AC
L-7AC
L-4BA-S
L-5BA
L-35DR
L-4DRM
L-5DRM
L-5DRC
L-6DRC
L-68DRMDX
11/11
1-11
Contra and Right Angle Attachments
ORANGE-45
ORANGE-90
45˚ Contra Angle Attachment
Multiple Angle
90˚ Right Angle Attachment
ORNG-35
ORNG-36
ORNG-1
ORNG-8-18
ORNG-33
ORNG-1275
ORNG-37
2.3 mm Fluted Ball
2.9 mm Fluted Ball
11.1 mm Fluted Router
10.5 mm Small Bone Burr
1.8 mm Fluted Drum
Craniotomes
CRANI-P
P-CRN-M
P-CRN
Pediatric Craniotome
CRANI-L
L-CRN
L-CRN-S
Large Craniotome
Also available as a rotating attachment (CRANI-L-R)
2.47 mm x 30.3 mm Spiral Router
CRANI-A
A-CRN
A-CRN-M
A-CRN-S
Adult Craniotome
2 mm x 15.6 mm Fluted Router
2.15 mm x 22 mm Spiral Router
CRANI-A-R
A-CRN
A-CRN-M
A-CRN-S
Rotating Adult Craniotome
2.15 mm x 22 mm Spiral Router
Specialty Attachments
ADG
ADG-10
ADG-11
ADG-13
ADG-155
CDA
CDA-1R
7.2 cm Adjustable Drill Guide
The ADG adjusts 3-6 mm increments
1.0 mm Twist Drill for 1.25 mm Screw
6.8 cm Controlled Depth Attachment
The CDA adjusts 1-4 mm increments
11/11
Anspach
Products
Contra and Right Angle Attachments, Craniotomes and
Specialty Attachments XM MM EM
1-12
Anspach
Products
Heavy Duty Attachments XM MM EM
SHORT HD
5 cm Heavy Duty Short Attachment
The Short-HD attachment is comparable in length
to the Black Max B-SILVER.
SHD-5B
SHD-6B
SHD-7B
SHD-6DX
SHD-6R
SHD-25R
SHD-3-10
SHD-8NS
SHD-6AC
SHD-75AC
SHD-75AC-A
SHD-9AC
SHD-17DD
SHD-25DD
SHD-1504TD
SHD-DS-A
SHD-325DS
SHD-4892DS
5 mm Fluted Ball
6 mm Fluted Ball
7 mm Fluted Ball
1.93 mm Suture Pass Drill/1.17 Eye
6 mm Fluted Acorn
7.5 mm Fluted Acorn
7.5 mm Fluted Acorn, Less Aggressive
9.2 mm Fluted Acorn
17 mm Diamond Disc
25.4 mm Diamond Disc
1.15 mm Twist Drill for 1.5 mm x 4 mm Screw
1.7 mm x 11.9 mm Twist Drill with Depth Stop, Aesculap®
3.2 mm x 5 mm Twist Drill with Depth Stop
4.8 mm x 9.2 mm Twist Drill with Depth Stop
MEDIUM-HD
8 cm Heavy Duty Medium Attachment
The Medium-HD attachment is comparable in length
to the Black Max B-VIOLET.
MHD-6B
MHD-25R
MHD-8NS
MHD-8NS-M
MHD-6AC
MHD-62DRM
MHD-3DRMC
MHD-15C
MHD-95DRM
MHD-17DD
MHD-25DD
MHD-16CT
MHD-19CT
MHD-98B
6 mm Fluted Ball
6 mm Fluted Acorn
6.2 mm x 4.6 mm Fluted Drum, Side Cut Only
3 mm x 9.5 mm Fluted Carbide Drum
3.2 mm Fluted Carbide Side Cutter
9.5 mm Fluted Drum
17 mm Diamond Disc
6.7 mm Coring Tool
9.9 mm Coring Tool
9.5 mm Boring Tool
(Use with XMax/eMax 2 Plus Only)
MHD-97B
12.6 mm Boring Tool
MHD-126B-3F 12.6 mm x 10.4 mm Boring Tool, 3 flutes
11/11
1-13
— continued
LONG-HD
12.4 cm Heavy Duty Long Attachment
The LONG-HD attachment is comparable in length to the Black Max B-BLUE-S.
LHD-3SB
LHD-4B
LHD-5B
LHD-6B
LHD-7B
LHD-8NS
LHD-8NS-M
LHD-6AC
LHD-47-5
LHD-5DRM
LHD-5DRM-12
LHD-5DRM-L
LHD-64DRM
LHD-95DRM
LHD-LS9-35
LHD-LS9-5
LHD-LS9-76
4 mm Fluted Ball
5 mm Fluted Ball
6 mm Fluted Ball
7 mm Fluted Ball
6 mm Fluted Acorn
3.2 mm Fluted Bell
6.4 mm Fluted Drum
9.5 mm Fluted Drum
4.7 mm x 20 mm Fluted Drum
XL-HD
20.2 cm Heavy Duty Extra Long Attachment
The XL-HD is comparable in length to the Black Max B-BLACK.
XLHD-3SB
XLHD-4B
XLHD-5B
XLHD-6B
XLHD-7B
XLHD-9B
XLHD-55DC
XLHD-25R
XLHD-8NS
XLHD-8NS-M
XLHD-6AC
XLHD-75AC
XLHD-51C
XLHD-95DRM
4 mm Fluted Ball
5 mm Fluted Ball
6 mm Fluted Ball
7 mm Fluted Ball
9 mm Fluted Ball
5.5 mm Coarse Diamond Ball
6 mm Fluted Acorn
7.5 mm Fluted Acorn
6.4 mm Fluted Cylindrical Carbide
9.5 mm Fluted Drum
11/11
Anspach
Products
Heavy Duty Attachments XM MM EM
1-14
Anspach
Products
Straight Attachments BM
B-SILVER
6.1 cm Attachment
SIL-3
SIL-4
SIL-5
SIL-6
SIL-7
SIL-7-9
SIL-17-1
SIL-17-2
SIL-17-3
SIL-17-4
SIL-17-5
SIL-17-6
SIL-17-1C
SIL-17-2C
SIL-17-3C
SIL-17-4C
SIL-17-5C
SIL-17-6C
SIL-17-4CX
SIL-17-5CX
SIL-17-6CX
SIL-0
SIL-1-3
SIL-1
SIL-2
SIL-2XL
SIL-1S
SIL-2S
SIL-3-10
3 mm Fluted Ball
4 mm Fluted Ball
5 mm Fluted Ball
6 mm Fluted Ball
7 mm Fluted Ball
9 mm Fluted Ball
1 mm Diamond Ball
2 mm Diamond Ball
3 mm Diamond Ball
4 mm Diamond Ball
5 mm Diamond Ball
6 mm Diamond Ball
2.15 mm x 22 mm Fluted Spiral Router
2.47 mm x 30.2 mm Fluted Spiral Router
1.93 mm Suture Pass Drill/1.17eye
B-TURQUOISE
5.9 cm Attachment
TURQ-3
TURQ-4
TURQ-5
TURQ-6
TURQ-7
TURQ-17-2
TURQ-17-3
TURQ-17-4
TURQ-17-5
TURQ-17-6
TURQ-17-2C
TURQ-17-5C
TURQ-17-4CX
3 mm Fluted Ball
4 mm Fluted Ball
5 mm Fluted Ball
6 mm Fluted Ball
7 mm Fluted Ball
2 mm Diamond Ball
3 mm Diamond Ball
4 mm Diamond Ball
5 mm Diamond Ball
6 mm Diamond Ball
SIL-8-18
SIL-8
SIL-8-M
SIL-8D-32
SIL-39
SIL-24
SIL-32
SIL-38
SIL-1510
SIL-464-4
SIL-466-6
SIL-DS-A
SIL-47
SIL-9
SIL-10
SIL-11
SIL-14-17
SIL-14
SIL-15
SIL-16-5
SIL-16
SIL-16XL2
SIL-18
SIL-19
SIL-20
SIL-21
SIL-22
SIL-23
TURQ-17-5CX
TURQ-17-6CX
TURQ-0-1
TURQ-1
TURQ-8-18
TURQ-8-23
TURQ-8
TURQ-8-M
TURQ-8D-25
TURQ-404-4
TURQ-406-6
TURQ-434-4
TURQ-436-6
5 mm Fluted Acorn
6 mm Fluted Acorn
7.5 mm Fluted Acorn
9.2 mm Fluted Acorn
1.55 mm x 10 mm Twist Drill
1.7 mm x 11.9 mm Twist Drill w/Depth Stop,
Aesculap®
6.2 mm Fluted Bell, Side Cut Only
6.4 mm Fluted Drum
9.5 mm Fluted Drum
12.7 mm Fluted Drum
17 mm Diamond Disc
3.2 mm Carbide Fluted Side Cutter
5.56 mm Boring Tool
6.7 mm Coring Tool
6.7 mm x 45 mm Coring Tool
8.48 mm Boring Tool
9.9 mm Coring Tool
10.06 mm Boring Tool
11.5 mm Coring Tool
13.23 mm Boring Tool
14.7 mm Coring Tool
.95 mm x 12.8 mm Fluted Router
11/11
1-15
— continued
Anspach
Anspach
Products
Products
B-VIOLET
8.2 cm Attachment
B-BLUE-S
11.25 cm Attachment
VIO-7-2
VIO-3
VIO-4
VIO-5
VIO-6
VIO-7
VIO-7-9
VIO-17-1
VIO-17-2
VIO-17-3
VIO-17-4
VIO-17-5
VIO-17-6
VIO-17-3C
VIO-17-4C
VIO-17-5C
VIO-17-6C
VIO-17-4CX
VIO-17-5CX
VIO-17-6CX
VIO-1
VIO-2
VIO-2XL
VIO-40-4
VIO-40-5
VIO-40-55
VIO-87-5
VIO-87-8
VIO-8-18
VIO-8
VIO-8-M
VIO-8D-32
VIO-39
VIO-24
VIO-32
VIO-38
VIO-9-5
VIO-9
VIO-10
VIO-98B
VIO-98C
VIO-97B
VIO-97C
VIO-99C
VIO-14
.
2 mm Fluted Ball
3 mm Fluted Ball
4 mm Fluted Ball
5 mm Fluted Ball
6 mm Fluted Ball
7 mm Fluted Ball
9 mm Fluted Ball
1 mm Diamond Ball
2 mm Diamond Ball
3 mm Diamond Ball
4 mm Diamond Ball
5 mm Diamond Ball
6 mm Diamond Ball
5.5 mm x 10 mm Fluted Oval
8 mm x 12.5 mm Fluted Barrel
5 mm Fluted Acorn
6 mm Fluted Acorn
7.5 mm Fluted Acorn
9.2 mm Fluted Acorn
5.6 mm Fluted Drum
6.4 mm Fluted Drum
9.5 mm Fluted Drum
9.5 mm Boring Tool
10.8 mm Coring Tool
12.6 mm Boring Tool
13.5 mm Coring Tool
16.8 mm Coring Tool
BLU-3
BLU-4
BLU-5
BLU-6
BLU-7
BLU-7-9
BLU-17-1
BLU-17-2
BLU-17-3
BLU-17-4
BLU-17-5
BLU-17-6
BLU-1
BLU-2XL
BLU-2S-25
BLU-40-55
BLU-8-18
BLU-8
BLU-8-M
BLU-8D-32
BLU-8D-32C
BLU-39
BLU-24
BLU-32
BLU-38
BLU-47
BLU-9-5
BLU-9-68
BLU-9
BLU-10
BLU-11
BLU-9DCX
BLU-27
BLU-CS5
BLU-CS6
BLU-CS7
BLU-LS9-35
BLU-LS9-5
BLU-LS9-5E
BLU-14
BLU-51
3 mm Fluted Ball
4 mm Fluted Ball
5 mm Fluted Ball
6 mm Fluted Ball
7 mm Fluted Ball
9 mm Fluted Ball
1 mm Diamond Ball
2 mm Diamond Ball
3 mm Diamond Ball
4 mm Diamond Ball
5 mm Diamond Ball
6 mm Diamond Ball
5.5 mm x 10 mm Fluted Oval
5 mm Fluted Acorn
6 mm Fluted Acorn
7.5 mm Fluted Acorn
9.2 mm Fluted Acorn
5.6 mm Fluted Drum
6.4 mm Fluted Drum
9.5 mm Fluted Drum
12.7 mm Fluted Drum
6.8 mm x 10.6 mm Extra Coarse Diamond Drum
6.4 mm x 4.8 mm Fluted Drum, Side Cut Only
4.7 mm x 20 mm Fluted Drum, Side Cut Only
11/11
1-16
Anspach
Products
— continued
B-TURQ-L
12.6 cm Tapered Attachment
B-BLACK
19 cm Attachment
TURQ-L3
TURQ-L4
TURQ-L5
TURQ-L6
TURQ-LS7
TURQ-L17-1
TURQ-L17-2
TURQ-L17-3
TURQ-L17-4
TURQ-L17-5
TURQ-L17-6
TURQ-L17-1C
TURQ-L17-2C
TURQ-L17-3C
TURQ-L17-4C
TURQ-L17-5C
TURQ-L17-6C
TURQ-L17-75C
TURQ-L17-4CX
TURQ-L17-5CX
TURQ-L17-6CX
TURQ-L17-7CX
TURQ-L1
TURQ-L40-4
TURQ-L40-5
TURQ-L8-18
TURQ-L8-23
TURQ-L8
TURQ-L8-L
3 mm Fluted Ball
4 mm Fluted Ball
5 mm Fluted Ball
6 mm Fluted Ball
7 mm Fluted Ball, Extends 8.9 mm
1 mm Diamond Ball
2 mm Diamond Ball
3 mm Diamond Ball
4 mm Diamond Ball
5 mm Diamond Ball
6 mm Diamond Ball
3 mm Fluted Matchstick,
Extends 20.8 mm
3.2 mm Diamond Matchstick,
Extends 28.5 mm
BLA-3
BLA-4
BLA-5
BLA-6
BLA-7
BLA-7-9
BLA-1
BLA-2
BLA-8
BLA-24
BLA-32
BLA-38
BLA-9
BLA-10
BLA-11
BLA-14
BLA-15
BLA-51
3 mm Fluted Ball
4 mm Fluted Ball
5 mm Fluted Ball
6 mm Fluted Ball
7 mm Fluted Ball
9 mm Fluted Ball
6 mm Fluted Acorn
7.5 mm Fluted Acorn
9.2 mm Fluted Acorn
6.4 mm Fluted Drum
9.5 mm Fluted Drum
12.7 mm Fluted Drum
3.2 mm Fluted Carbide Side Cutter
TURQ-L8-M
TURQ-L8D-25
TURQ-L8D-32L
TURQ-L9-58
11/11
1-17
— continued
B-RED
26.65 cm Attachment
RED-3
RED-4
RED-5
RED-6
RED-7
RED-7-9
RED-17-55C
RED-17-75C
RED-1
RED-2
RED-8
RED-24
RED-32
RED-38
RED-9
RED-10
RED-11
3 mm Fluted Ball
4 mm Fluted Ball
5 mm Fluted Ball
6 mm Fluted Ball
7 mm Fluted Ball
9 mm Fluted Ball
6 mm Fluted Acorn
7.5 mm Fluted Acorn
9.2 mm Fluted Acorn
6.4 mm Fluted Drum
9.5 mm Fluted Drum
12.7 mm Fluted Drum
Minimally Invasive Attachments (MIA) BM
B-GREY-MIA16
16 cm MIA
GREY-MIA16-3
GREY-MIA16-4
GREY-MIA16-17-2
GREY-MIA16-17-3
GREY-MIA16-17-4C
GREY-MIA16-8
3 mm Fluted Ball
4 mm Fluted Ball
2 mm Diamond Ball
3 mm Diamond Ball
B-GREY-MIA20
20 cm MIA
GREY-MIA20-3
GREY-MIA20-4
GREY-MIA20-7
GREY-MIA20-7-9
GREY-MIA20-17-3
GREY-MIA20-17-4
GREY-MIA20-17-2C
GREY-MIA20-17-3C
GREY-MIA20-17-4C
GREY-MIA20-17-75C
GREY-MIA20-8
3 mm Fluted Ball
4 mm Fluted Ball
7 mm Fluted Ball
9 mm Fluted Ball
3 mm Diamond Ball
4 mm Diamond Ball
11/11
Anspach
Products
1-18
Anspach
Products
Craniotomes, Specialty, MRA, and Contra
and Right Angle Attachments Attachments
Craniotomes
B-TURQ-X
TURQ-1-M
TURQ-1
Pediatric Craniotome
B-GOLD
GOL-2S
GOL-2
Large Craniotome
2.47 mm x 30.3 mm Fluted Spiral Router
B-GREEN
GRE-1
GRE-1-M
GRE-1S
Standard Craniotome
B-GREEN-R
GRE-1
GRE-1-M
GRE-1S
Rotating Green Craniotome
BM
Specialty Attachments
B-GREY-ADG
8.7 cm Adjustable Drill Guide (ADG)
GREY-471-25
GREY-471-50
GREY-471-70
GREY-472-00
1.0 mm Twist Drill for 1.25mm Screw
B-TURQ-CDA
7.7 cm Controlled Depth
Adjusts 1 mm-4 mm increment, Attachment (CDA)
TURQ-1
Micro Revision Attachments (MRA)
B-MRA-S
9.4 cm Revision Attachment
B-MRA-M
16.5 cm Revision Attachment
B-MRA-L
22 cm Revision Attachment
MRA-8S
MRA-8M
MRA-8L
2.3 mm x 4.5 mm Fluted Matchstick for B-MRA-S
2.3 mm x 4.5 mm Fluted Matchstick for B-MRA-M
2.3 mm x 4.5 mm Fluted Matchstick for B-MRA-L
Contra and Right Angles
B-ORANGE-45
45˚ Contra Angle Attachment
Multiple Angle
B-ORANGE-90
0˚ Right Angle Attachment
ORNG-35
ORNG-36
ORNG-1
ORNG-8-18
ORNG-33
ORNG-1275
ORNG-37
2.3 mm Fluted Ball
2.9 mm Fluted Ball
11.1 mm Fluted Router
10.5 mm Small Bone Burr
1.8 mm Fluted Drum
11/11
1-19
Micro Curved Attachment (MCA) and Dissection Tools
MCA
Micro Curved Attachment
MCA5-05SD
MCA5-06SD
MCA5-07SD
MCA5-08SD
MCA5-1SD
MCA5-15SD
MCA5-2SD
MCA5-1SB
MCA5-15SB
MCA5-2SB
MCA7-05SD
MCA7-06SD
MCA7-07SD
MCA7-08SD
MCA7-1SD
MCA7-15SD
MCA7-2SD
MCA7-1SB
MCA7-15SB
MCA7-2SB
0.5 mm Diamond Ball, 5.6 cm
1 mm Diamond Ball, 5.6 cm
1 mm Fluted Ball, 5.6 cm
1.5 mm Fluted Ball, 5.6 cm
1.5 mm Fluted Ball, 7.3 cm
11/11
Anspach
Products
MCA XM MM EM
1-20
Anspach
Products
MA Attachments and Dissection Tools
Minimal Access Attachments XM MM BM EM
4.8 mm
4 mm
3.3 mm
15 cm
15 cm
MA-D20
MA-DRIVER
MA-D20BM
20° Angle Driver XM MM EM
Minimal Access Straight Driver
20° Angle Driver BM
MA-10S
MA-10C
Bearing Sleeve, 10 cm Straight
Bearing Sleeve, 10 cm Curved
MA10-1SB
MA10-15SB
MA10-2SB
MA10-25SB
MA10-3SB
MA10-08SD
MA10-2SD
MA10-3SD
MA10-4D
MA10-8N-18
MA10-8N
MA10-8NS
MA10-8NSDC
1 mm Fluted Ball, 10 cm
1.5 mm Fluted Ball, 10 cm
2.5 mm Fluted Ball, 10 cm
0.8 mm Diamond Ball, 10 cm
2 mm Diamond Ball, 10 cm
1.8 mm Fluted Matchstick, 10 cm
3 mm Fluted Matchstick, 10 cm
3 mm Coarse Diamond Matchstick, 10 cm
XM MM EM
MA-15S
MA-15C
MA-15ST
MA-19ST
Bearing Sleeve, 15 cm Straight
Bearing Sleeve, 15 cm Curved
Bearing Sleeve, 15 cm Straight Taper
Bearing Sleeve, 19 cm Straight Taper
MA15-2SB
MA19-2SB
MA15-3SB
MA19-3SB
MA15-15SD
MA19-15SD
MA15-2SD
MA19-2SD
MA15-3SD
MA19-3SD
MA15-4D
MA19-4D
MA15-4DC
MA15-8N-18
MA19-8N-18
MA15-8N
MA19-8N
MA15-8NS
MA19-8NS
MA15-8NSDC
MA19-8NSDC
4 mm Coarse Diamond Ball, 15 cm
11/11
1-21
QD8-S
B-QD8-S
QD8
B-QD8
7.5 cm Angle Attachment XM MM EM
7.5 cm Angle Attachment BM
8 cm Angle Attachment XM MM EM
8 cm Angle Attachment BM
QD8-05B
QD8-1SB
QD8-15SB
QD8-2SB
QD8-25SB
QD8-3SB
QD8-4B
QD8-5B
QD8-5B-2
QD8-6B
QD8-7B
QD8-05SD
QD8-1SD
QD8-15SD
QD8-2SD
QD8-25SD
QD8-3SD
QD8-3SD-100
QD8-35SD
QD8-4D
QD8-5D
QD8-5D-2
1 mm Fluted Ball
1.5 mm Fluted Ball
2 mm Fluted Ball
2.5 mm Fluted Ball
3 mm Fluted Ball
4 mm Fluted Ball
5 mm Fluted Ball
6 mm Fluted Ball
7 mm Fluted Ball
0.5 mm Diamond Ball
1 mm Diamond Ball
1.5 mm Diamond Ball
2 mm Diamond Ball
2.5 mm Diamond Ball
3 mm Diamond Ball
3.5 mm Diamond Ball
4 mm Diamond Ball
5 mm Diamond Ball
5 mm Diamond Ball,
2 mm Shaft Exposure
6 mm Diamond Ball
1.5 mm Coarse Diamond Ball,
120/140 Grit
QD8-6D
QD8-1SDC
QD8-15SDC
7.5 cm, 8 cm
QD8-2SDC
QD8-25SDC
QD8-3SDC
QD8-35SDC
QD8-4DC
QD8-5DC
QD8-6DC
QD8-4DX
QD8-5DX
QD8-6DX
QD8-1R
QD8-4OV
QD8-4OVD
QD8-5OV
QD8-8N-18
QD8-8N
QD8-8NS
QD8-8ND
QD8-5AC
QD8-6AC
QD8-4DRM
QD8-62DRM
QD8-62BE
QD8-5BA
4 mm x 8 mm Diamond Oval
5 mm Fluted Acorn
6 mm Fluted Acorn
4 mm x 8.9 mm Fluted Drum,
Side Cut Only
6.2 mm x 4.6 mm Fluted Drum,
Side Cut Only
Standard length cutting burrs extend approximately 16 mm from the distal end of the attachment.
Extended length cutting burrs extend approximately 27 mm from the distal end of the attachment.
11/11
Anspach
Products
Quick Disconnect (QD) Angle Attachments XM MM BM EM
1-22
Anspach
Products
Quick Disconnect (QD) Angle Attachments XM MM BM EM — continued
QD11-S
B-QD11-S
QD11
B-QD11
QD11-1SB
QD11-2SB
QD11-3SB
QD11-4B
QD11-5B
QD11-5B-A
QD11-6B
QD11-7B
QD11-1SD
QD11-2SD
QD11-3SD
QD11-4D
QD11-5D
QD11-6D
QD11-3SDC
QD11-4DC
QD11-5DC
QD11-6DC
QD11-4DX
QD11-5DX
QD11-6DX
QD11-7DX
QD11-1R
QD11-4OV
1 mm Fluted Ball
2 mm Fluted Ball
3 mm Fluted Ball
4 mm Fluted Ball
5 mm Fluted Ball
5 mm Fluted Ball, Less Aggressive
6 mm Fluted Ball
7 mm Fluted Ball
1 mm Diamond Ball
2 mm Diamond Ball
3 mm Diamond Ball
4 mm Diamond Ball
5 mm Diamond Ball
6 mm Diamond Ball
QD14-S
B-QD14-S
QD14
B-QD14
QD14-3SB
QD14-4B
QD14-5B
QD14-5B-A
QD14-6B
QD14-1SD
QD14-2SD
QD14-3SD
QD14-4D
QD14-5D
QD14-6D
3 mm Fluted Ball
4 mm Fluted Ball
5 mm Fluted Ball
5 mm Fluted Ball, Less Aggressive
6 mm Fluted Ball
1 mm Diamond Ball
2 mm Diamond Ball
3 mm Diamond Ball
4 mm Diamond Ball
5 mm Diamond Ball
6 mm Diamond Ball
10.5 cm, 11 cm
QD11-4OVD
QD11-4OVDC
QD11-5OV
QD11-8N-18
QD11-8N
QD11-8NS
QD11-8NS-M
QD11-8ND
QD11-8NSDC
QD11-4AC
QD11-5AC
QD11-6AC
QD11-4DRM
4 mm x 8 mm Diamond Oval
4 mm x 8 mm Coarse Diamond Oval
4 mm Fluted Acorn
5 mm Fluted Acorn
6 mm Fluted Acorn
4 mm x 8.9 mm Fluted Drum, Side Cut
Only
QD11-5DRM
QD11-62DRM
6.2 mm x 4.6 mm Fluted Drum, Side Cut
Only
QD11-45DRMDX 4 mm x 5 mm Extra Coarse Diamond
Drum
QD11-3BA-A
3 mm x 11 mm Fluted Barrel, 14 Flutes
QD11-4BA-A
4 mm x 11 mm Fluted Barrel, 14 Flutes
QD11-5BA-A
QD11-6BA-A
13.5 cm, 14 cm
QD14-4DC
QD14-5DC
QD14-6DX
QD14-4OV
QD14-8N-18
QD14-8N
QD14-8NS
QD14-8ND
QD14-47DRM
QD14-4BA
4 mm x 8mm Fluted Oval
11/11
1-23
O-SAW
Oscillating microSaw Attachment E12 or drivers on page 1-24
Speed:
12,000 cpm
Arc:
6°
MO-3001
MO-3002
MO-3003
MO-3005
MO-3006
MO-3105
MO-3225
MO-3515
28.5 mm x 5.5 mm Oscillating Micro Blade
31 mm x 10 mm Oscillating Micro Blade
21 mm x 5.5 mm Oscillating Micro Blade
18.5 mm x 10 mm Oscillating Micro Blade
18.5 mm x 9 mm Oscillating Micro Blade
31 mm x 9 mm Oscillating Micro Blade
R-SAW
Reciprocating microSaw E12 or drivers on page 1-24
Speed:
12,000 cpm
Axial Travel: 0.1 in (2.5 mm)
MR-0500
MR-0520
MR-0540
MR-0560
MR-0580
MR-0600
MR-14006
6.6 mm, 9th/cm Reciprocating Micro Blade, 0.5 mm Thick
15 mm, 13th/cm Reciprocating Micro Blade, 0.25 mm Thick
S-SAW
Sagittal microSaw Attachment E12 or drivers on page 1-24
Speed:
12,000 cpm
Arc:
6°
MS-3101
MS-3102
MS-3104
MS-3105
MS-3106
MS-3108
MS-3101C
MS-3225
MS-3515
25.5 mm x 9.5 mm Sagittal Micro Blade
18.5 mm x 9 mm Sagittal Micro Blade
34 mm x 4 mm Sagittal Micro Blade
25.5 mm x 9.5 mm Coarse Sagittal Micro Blade
31 mm x 9 mm Sagittal Micro Blade
42 mm x 13.3 mm Sagittal Micro Blade
11/11
Anspach
Products
microSaws XM MM BM EM E12
1-24
Anspach
Products
Small Attachments: J-Latch and Jacobs Chuck
SA-JLATCH
Small Attachment, J-Latch E12 or drivers below
SA-JACOBS
Small Attachment, Jacobs Chuck E12 or drivers below
Drivers
DRIVER
BM-DRIVER
Keyless Driver
Keyless Driver
XM MM EM
BM
11/11
1-25
MM-SAGITTAL
B-SAGITTAL
Sagittal Saw
Sagittal Saw
LS-3405
LS-3406
LS-3407
LS-3408
LS-3409
LS-3410
LS-3411
LS-3412
LS-3413
MS-3100C
MS-3231
MS-3240
5 mm x 20 mm Graft Harvesting Blade
10 mm x 2 0mm Graft Harvesting Blade
41 mm x 14 mm Coarse Sagittal Saw Blade
41 mm x 19.5 mm Sagittal Saw Blade
41 mm x 9.5 mm Sagittal Saw Blade
11/11
XM MM EM
BM
Anspach
Products
Sagittal Saws
1-26
Anspach
Products
Saw Blades
Saw Blade Styles
All saw blades are supplied sterile and are designed for single use only.
Sagittal Saw Blades
(E-SAGITTAL, B-SAGITTAL,
MM-SAGITTAL only)
Microsaw Blades (S-SAW, O-SAW, R-SAW)
Micro Sagittal Saw Blades
(S-SAW)
Graft Harvesting Blades
Micro Reciprocating Saw Blades
(R-SAW)
MS-3101
MR-14006
MS-3102
MR-0500
MS-3104
MR-0520
MS-3105
MR-0540
MS-3106
MR-0560
MS-3108
MR-0580
LS-3405
5mm
}
LS-3406
20mm
LS-3407
LS-3408
LS-3409
LS-3410
MS-3225
MR-0600
LS-3411
MS-3101C
LS-3412
MS-3515
LS-3413
Micro Oscillating Saw Blades (O-SAW)
mm
Sagittal Blades
14mm
MS-3100C
41mm
MS-3231
MO-3001
MO-3005
MO-3002
MO-3006
MO-3003
MO-3225
MO-3105
MO-3515
MS-3240
11/11
1-27
B-COLLECTOR-1
Bone Collector (Qty. 1)
B-COLLECTOR-BX
Bone Collector (Qty. 12)
Anspach
Products
Bone Collector
Compact SpeedReducer
CSR60
Perforator Driver with Hudson End
(60:1 Ratio, approx. 1,300 rpm)
5.8 in. long, 1.5 in. diameter, 0.8 lbs.
CSRSC
Storage Cover, Drive Shaft Protector Replacement
CSR60BM
Perforator Driver with Hudson End
(60:1 Ratio, approx. 1,300 rpm)
5.1 in. long, 1.5 in. diameter, 0.8 lbs.
CSRSC-BM
Storage Cover, Drive Shaft Protector Replacement
Cranial Perforator
CPERF-14-11-3F
11/11
14-11 mm Cranial Perforator
XM MM EM
BM
1-28
Anspach
Products
Couplers
COUPLER XM MM EM Coupler for Anspach Motors
To couple with Midas Rex Legend® Bone Mill
BM-COUPLER BM
Coupler for Black Max Handpiece
To couple with Midas Rex Legend® Bone Mill
KAM SuperSucker Disposable Suction Tips/Filters
SS1
SS2
SS2C
Super Sucker Long (BX/20)
Super Sucker Short (BX/20)
Super Sucker Short Curved (BX/20)
11/11
1-29
Cutting Burr Styles
STANDARD AND EXTENDED STYLES
Standard length cutting burrs extend
approximately 16 mm from the distal
end of the attachment. Extended length
cutting burrs extend approximately 27 mm
from the distal end of the attachment
The extended length offers the surgeon
greater visibility of the cutter head style.
OVAL
Extended
BARREL
Fluted
Fluted
Diamond
MATCHSTICK
Standard
Anspach
Products
Standard and Extended Styles
DRUM
Fluted
Fluted
Diamond
Fluted
Fluted
ACORN
Diamond
FLUTED BALL
Fluted
PEAR SHAPED
Fluted
Side Cut
Only
Fluted, inverted
S-15DRMC
Diamond
DIAMOND BALL
CORING/BORING
TWIST DRILL
COARSE DIAMOND BALL
DS-A
ADG
EXTRA COARSE DIAMOND BALL
CARBIDE
DIAMOND DISC
ROUTER
Fluted
Fluted Spiral
Wire Threader
Cutting burrs are pictured for head styles only. Please refer to your cutting burr chart for available lengths and additional detail.
All cutting burrs are supplied sterile unless otherwise indicated and are designed for single use only.
11/11
2-1
Synthes Power Equipment
Electric Pen Drive Sets .................................................................................. 2-4
Air Pen Drive and Accessories ...................................................................... 2-5
Electric Pen Drive and Accessories ................................................................ 2-6
Small Battery Drive Sets ............................................................................... 2-11
Small Battery Drive and Accessories ............................................................. 2-12
Trauma Recon System Set ............................................................................ 2-16
Trauma Recon System and Accessories......................................................... 2-17
Battery Power Line Sets................................................................................ 2-21
Battery Power Line and Accessories.............................................................. 2-23
ComPact Air Drive II Set ............................................................................... 2-26
ComPact Air Drive II and Accessories............................................................ 2-27
Oscillating Bone Saw ................................................................................... 2-29
Universal Battery Charger II and Batteries..................................................... 2-30
Attachments and Accessories ...................................................................... 2-32
Chucks and Replacement Keys..................................................................... 2-34
Double Air Hoses ......................................................................................... 2-35
Autoclavable Oil, Regulators and Fitting....................................................... 2-36
Saw Blades .................................................................................................. 2-37
Cutting Tools for Electric Pen Drive and Air Pen Drive ................................... 2-44
Accessories for Mini Compressed Air Machine ............................................. 2-51
Graphic Cases.............................................................................................. 2-52
Compartmental Pressure Monitoring System................................................ 2-55
For operating and care instructions for Synthes power equipment, refer to the User’s Manual and Cleaning and Sterilization
Charts for each specific product.
11/11
Synthes Power
Equipment
Air Pen Drive Sets ........................................................................................ 2-2
2-2
Air Pen Drive Sets
Air Pen Drive Set
Synthes Power
Equipment
01.001.594
60.550.050
Three-Level Graphic Case for Air Pen Drive
05.001.028
05.001.030
05.001.031
05.001.032
05.001.034
05.001.037
05.001.038
05.001.039
05.001.040
05.001.045
05.001.046
05.001.050
05.001.066
05.001.067
05.001.068
05.001.070
05.001.071
05.001.074
05.001.080
05.001.081
05.001.082
05.001.084
05.001.085
05.001.086
05.001.089
05.001.090
05.001.091
05.001.099
05.001.120
05.001.121
Instruments
Screw Attachment, AO Coupling, for Pen Drive
Drill Attachment, Mini Quick Coupling, for Pen Drive
Drill Attachment, J-Latch Coupling, for Pen Drive
Drill Attachment, AO Coupling, for Pen Drive
Screw Attachment, Mini Quick Coupling, for Pen Drive
K-Wire Attachment for Pen Drive
Oscillating Saw Attachment for Pen Drive
Sagittal Saw Attachment for Pen Drive
Reciprocating Saw Attachment for Pen Drive
Burr Attachment, Short, for Pen Drive
Burr Attachment, Medium, for Pen Drive
Burr Attachment, Long-Angled, for Pen Drive
Irrigation Nozzle, Short, for Pen Drive
Irrigation Nozzle, Medium, for Pen Drive
Irrigation Nozzle, Long, for Pen Drive
Irrigation Nozzle for Sagittal Saw Attachment
Irrigation Nozzle for Reciprocating Saw Attachment
Handhold for Tool Change for Pen Drive Attachments
Air Pen Drive
Foot Switch, for Air Pen Drive
Hand Switch, for Air Pen Drive
Double Air Hose, for Air Pen Drive, 5 meters
Angled Coupling, for Air Pen Drive
Protective Cap, for Air Pen Drive
Adaptor for Maintenance Station, for Air Pen Drive
Irrigation Flow Control Unit, for Air Pen Drive
Seal Nipple for Double Air Hose, for Air Pen Drive
Maintenance Station for Pen Drive
Drill Attachment with Jacobs Chuck for Pen Drive
Guide for K-Wires for Pen Drive for Oscillating Saw Attachment
Instruments and implants approved by the AO Foundation
11/11
2-3
Air Pen Drive Sets
01.001.595
Air Pen Drive Set — Hand & Foot
Graphic Case
Three-Level Graphic Case for Air Pen Drive
05.001.028
05.001.030
05.001.031
05.001.032
05.001.034
05.001.037
05.001.038
05.001.039
05.001.040
05.001.045
05.001.046
05.001.074
05.001.080
05.001.081
05.001.082
05.001.084
05.001.085
05.001.086
05.001.089
05.001.091
05.001.099
Instruments
Screw Attachment, AO Coupling, for Pen Drive
Drill Attachment, Mini Quick Coupling, for Pen Drive
Drill Attachment, J-Latch Coupling, for Pen Drive
Drill Attachment, AO Coupling, for Pen Drive
Screw Attachment, Mini Quick Coupling, for Pen Drive
K-Wire Attachment for Pen Drive
Oscillating Saw Attachment for Pen Drive
Sagittal Saw Attachment for Pen Drive
Reciprocating Saw Attachment for Pen Drive
Burr Attachment, Short, for Pen Drive
Burr Attachment, Medium, for Pen Drive
Handhold for Tool Change for Pen Drive Attachments
Air Pen Drive
Double Air Hose, for Air Pen Drive, 5 meters
Maintenance Station for Pen Drive
11/11
Synthes Power
Equipment
60.550.050
2-4
Electric Pen Drive Sets
Electric Pen Drive Set
Electric Pen Drive Hand and Foot Set
Synthes Power
Equipment
01.001.580
01.001.581
690.580
05.001.000
05.001.010
05.001.012
05.001.016
05.001.021
05.001.022
05.001.027
05.001.028
05.001.029
05.001.030
05.001.031
05.001.032
05.001.033
05.001.034
05.001.035
05.001.036
05.001.037
05.001.038
05.001.039
05.001.040
05.001.042
05.001.043
05.001.044
05.001.045
05.001.046
05.001.047
05.001.048
05.001.049
05.001.050
05.001.051
05.001.052
05.001.053
05.001.054
05.001.059
05.001.066
05.001.067
05.001.068
05.001.070
Graphic Case, for Electric Pen Drive
Instruments in set 01.001.580
Standard Console with irrigation,
for Electric Pen Drive
Electric Pen Drive, 60,000 RPM
Hand Switch, for Electric Pen Drive
Foot Switch, 1 pedal, for Electric Pen Drive
Cable Electric Pen Drive, 4M, to Console
Cable Foot Switch, to Console
Seal Nipple for Cables
Screw Attachment AO coupling
Screw Attachment, hex coupling
Drill Attachment, mini quick coupling
Drill Attachment, J-Latch coupling
Drill Attachment, AO coupling
45° Oscillating Drill Attachment,
mini quick coupling
Screw Attachment, mini quick coupling
90° Drill Attachment, short, mini quick coupling
90° Drill Attachment, long, mini quick coupling
K-Wire Attachment, for Pen Drive
Oscillating Saw Attachment, for Pen Drive
Sagittal Saw Attachment, for Pen Drive
Reciprocating Saw Attachment, for Pen Drive
45° Drilling Attachment, mini quick coupling
45° Drilling Attachment, J-Latch coupling
45° Drilling Attachment, AO coupling
Burr Attachment, short
Burr Attachment
Burr Attachment
Burr Attachment, short, angled
Burr Attachment
Burr Attachment
Dura Guard, short, for Pen Drive
Dura Guard, medium, for Pen Drive
Dura Guard, long, for Pen Drive
Perforator, for Pen Drive
Craniotome Attachment, for Pen Drive
Irrigation Nozzle, Short
Irrigation Nozzle, Medium
Irrigation Nozzle, Long
Irrigation Nozzle for Sagittal Saw Attachment
05.001.071
05.001.074
05.001.076
05.001.099
05.001.104
05.001.105
05.001.108
05.001.110
05.001.111
05.001.120
05.001.121
05.001.177
05.001.000
05.001.010
05.001.012
05.001.016
05.001.021
05.001.022
05.001.027
05.001.028
05.001.030
05.001.031
05.001.032
05.001.034
05.001.037
05.001.038
05.001.039
05.001.040
05.001.045
05.001.046
05.001.074
05.001.099
Also available: Modular cases for Electric Pen Drive (see page 2-52)
Irrigation Nozzle for Reciprocating Saw Attachment
Handhold for Tool Change for Attachments,
for Pen Drive
Irrigation Nozzle, for perforator 05.001.054
Maintenance Station
Pneumatic Connection, DISS Coupling for
05.001.099
Pneumatic Connection, Schrader Coupling for
05.001.099
Light Adaptor
Drill Attachment, hexagonal
Irrigation Nozzle for Electric Pen Drive,
hexagonal drilling attachment
Drill Attachment with Jacobs Chuck
Guide for K-wires for Pen Drive, for Oscillating
Saw Attachment
Perforator, Hudson coupling, for Pen Drive
Instruments in set 01.001.581
Standard Console with irrigation,
Electric Pen Drive, 60,000 RPM
Hand Switch, for Electric Pen Drive
Foot Switch, 1 pedal, for Electric Pen Drive
Cable Electric Pen Drive, 4M, to Console
Cable Foot Switch, to Console
Seal Nipple for Cables
Screw Attachment AO coupling
K-Wire Attachment, for Pen Drive
Oscillating Saw Attachment, for Pen Drive
Sagittal Saw Attachment, for Pen Drive
Reciprocating Saw Attachment, for Pen Drive
Burr Attachment, short
Burr Attachment
Handhold for Tool Change for Attachments,
for Pen Drive
Maintenance Station
11/11
2-5
Air Pen Drive
Air Pen Drive
05.001.080
Air Pen Drive
Synthes Power
Equipment
Air Pen Drive Accessories
05.001.081
05.001.082
05.001.083
05.001.084
Double Air Hoses
3 meters
5 meters
05.001.083
05.001.085
05.001.086
05.001.087
05·001.088
05.001.089
05.001.090
05.001.091
Air Pen Accessories
Adaptor, Schrader/Synthes
Adaptor, Draeger/Synthes
Irrigation Flow Control Unit, for Air Pen Drive
11/11
05.001.085
2-6
Electric Pen Drive
Electric Pen Drive
Synthes
Power
Equipment
05.001.010
Electric Pen Drive, 60,000 rpm
Electric Pen Drive Accessories
05.001.000
Consoles
Standard Console with irrigation
05.001.002
Basic Console
05.001.012
Hand Switch
05.001.016
05.001.017
05.001.022
05.001.026
Foot Switch, 1 pedal
Foot Switch, 2 pedals
Cable Foot Switch, to console
Cable Foot Switch, 2 m, to foot switch
11/11
2-7
Electric Pen Drive
Electric Pen Drive— continued
Cable Electric Pen Drive, 2 m, to console
Seal Nipple for cables
05.001.028
05.001.029
05.001.034
Screw Attachments
Screw Attachment, AO coupling
Screw Attachment, hex coupling
05.001.030
05.001.031
05.001.032
05.001.110
05.001.033
Drill Attachments
Drill Attachment, hexagonal
45° Oscillating Drill Attachment, mini quick coupling
05.001.035
05.001.036
90° Drill Attachment, short, mini quick coupling
90° Drill Attachment, long, mini quick coupling
05.001.037
K-Wire Attachment
Synthes
Power
Equipment
05.001.020
05.001.021
05.001.025
05.001.027
11/11
2-8
Electric Pen Drive
Synthes
Power
Equipment
Electric Pen Drive Accessories — continued
05.001.038
Oscillating Saw Attachment
05.001.039
05.001.183
Sagittal Saw Attachment
In-line Sagittal Saw Attachment
05.001.040
Reciprocating Saw Attachment
05.001.042
05.001.043
05.001.044
45° Drilling Attachments
mini quick coupling
J-latch coupling
AO coupling
05.001.120
Jacobs Chuck, cannulated
05.001.045
05.001.046
05.001.047
05.001.048
05.001.049
05.001.050
05.001.055
05.001.063
Burr Attachments
short
medium
long
short, angled
medium, angled
long, angled
extra-extra long, angled
extra long, angled
05.001.123
Drill/Burr Attachment, for 2.35 mm shafts, for Pen Drive
11/11
2-9
Electric Pen Drive
Electric Pen Drive Accessories— continued
Torque Calibration Units
0.4 Nm Torque Calibration Unit
0.8 Nm Torque Calibration Unit
05.001.066
05.001.067
05.001.068
05.001.065
05.001.122
05.001.070
05.001.071
05.001.185
05.001.111
Irrigation Nozzles
short
medium
long
for Extra Long Burring Attachment (05.001.063)
for Extra-Extra Long Burring Attachment (05.001.055)
for Sagittal Saw Attachment (05.001.039)
for Reciprocating Saw Attachment (05.001.040)
for In-Line Sagittal Saw Attachment (05.001.183)
for Hexagonal Drilling Attachment (05.001.110)
05.001.069.01S
Irrigation Tubing Set, single pack
05.001.103
Adaptor for Intra-Coupling
05.001.177
Perforator with Hudson Coupling, for Pen Drive
05.001.108
Light Adapter for Small Battery Drive, for Electric Pen Drive
11/11
Synthes
Power
Equipment
05.001.060
05.001.061
2-10
Electric Pen Drive
Synthes
Power
Equipment
Electric Pen Drive Accessories— continued
05.001.074
Handhold for Tool Change for Attachments
05.001.075
05.001.095
Cleaning Brush for Wire Driver
Oil Dispenser with Synthes oil, 50 ml
05.001.098
05.001.099
05.001.094
05.001.101
05.001.102
05.001.064
Maintenance Spray
Maintenance Station
Refill Kit for Electric Pen Drive Maintenance Station
Adaptor for Maintenance Spray for Drive Unit
Adaptor for Maintenance Spray for EPD Attachments
Adaptor, for Maintenance Unit for XL and XXL attachment
05.001.104
05.001.105
Pneumatic Connection, DISS coupling for 05.001.099
Pneumatic Connection, Schrader coupling for 05.001.099
05.001.121
Guide for K-wires for Electric Pen Drive, for oscillating saw attachment
05.001.100
Cart for Electric Pen Drive
05.001.074
05.001.098
05.001.099
05.001.101
11/11
2-11
Small Battery Drive Sets
105.955 Small Battery Drive Set
105.954 Small Battery Drive Set, with 14.4 V Battery Pack
Synthes
Power
Synthes
Power
Equipment
Equipment
60.550.010
60.550.011
60.550.012
60.550.013
60.550.014
60.550.016
Base Assembly for Small Battery Drive Graphic Case
Lid for Small Battery Drive Graphic Case
Attachment Rack for Small Battery Drive Graphic Case
Insert Tray for 12V Battery Casings
Insert Tray for 14.4V Battery Casings (in set 105.954)
Insert Tray for SBD Handpiece and Radiolucent Drive
05.001.204
05.001.250
05.001.253
532.002
532.003
532.004
532.010
532.011
532.012
532.015
532.021
532.022
Instruments in both sets
Universal Battery Charger II
AO/ASIF Quick Coupling for Drill Bits
Large Chuck with Key, Drilling Speed
Small Battery Drive Battery Casing, for 12V Battery, 2 ea.
Small Battery Drive 12V Battery, 2 ea.
Battery Insertion Shield, for Small Battery Drive, 2 ea.
Small Battery Drive
Mini Quick Coupling, for Small Battery Drive
Stryker J-Latch Coupling, for Small Battery Drive
Large Quick Coupling, for Small Battery Drive
Quick Coupling for K-Wires, for Small Battery Drive
532.017
532.031
532.032
532.033
Additional instruments in set 105.954
AO Reduction Drive Unit
Adaptor for Radiolucent Drive
Small Battery Drive Battery Casing, for 14.4V Battery, 2 ea.
Small Battery Drive 14.4V Battery, 2 ea.
Also available: AO Screw Attachment (05.001.251)
Small Chuck with Key, Drilling Speed (05.001.252)
Large Chuck with Key, Reaming Speed (05.001.254)
11/11
2-12
Small Battery Drive
Small Battery Drive
Small Battery Drive
Includes Cleaning Brush (519.40) and
Autoclavable Oil (519.97)
Synthes
Power
Equipment
532.010
Small Battery Drive Accessories
532.003
12 V Battery
For Small Battery Drive (530.010)
Voltage: 12 VDC
Capacity: 0.5 Amp hour
Type: NiCd
532.033
14.4 V Battery
Voltage: 14.4 VDC
Type: NiCd
532.004
Battery Insertion Shield
532.002
Battery Casing
For 12 V Battery
532.032
Battery Casing
For 14.4 V Battery
532.003
532.033
532.004
532.002
532.011
532.012
532.032
Mini Quick Coupling
Stryker J-Latch Coupling
11/11
2-13
Small Battery Drive
Small Battery Drive Accessories— continued
Quick Coupling for drill bits
Cannulation: 2.1 mm
05.001.251
AO Screw Attachment
532.015
Large Quick Coupling
Cannulation: 3.2 mm
05.001.252
Small Chuck with key
Cannulation: 3.3 mm
Accepts round and triangular shafts up to 7.3 mm
05.001.253
Large Chuck with key
Cannulation: 3.3 mm
05.001.254
Large Chuck with Key, Reaming Speed
Synthes
Power
Equipment
05.001.250
11/11
2-14
Small Battery Drive
Synthes
Power
Equipment
Small Battery Drive Accessories— continued
532.017
AO Reduction Drive Unit
Cannulation: 3.2 mm
532.018
Hudson Reduction Drive Unit
Cannulation: 3.2 mm
532.019
Trinkle Reduction Drive Unit
Cannulation: 3.2 mm
532.020
Modified Trinkle Reduction Drive Unit
Cannulation: 3.2 mm
532.021
532.022
Quick Coupling for Kirschner Wires
Cannulation: 3.2 mm (fully open)
11/11
2-15
Small Battery Drive
Small Battery Drive Accessories — continued
Oscillating Saw Attachment II, for Small Battery Drive
532.026
Oscillating Saw Attachment, large, for Small Battery Drive
532.027
Replacement Key, for Saw Attachment (532.026)
532.031
Synthes
Power
Equipment
532.023
11/11
2-16
Trauma Recon System Set
Synthes
Power
Equipment
01.550.001 Trauma Recon System Set
60.550.140 Graphic Case, Nylon, for Trauma Recon System
05.001.201
05.001.202
05.001.203
05.001.204
05.001.205
05.001.206
05.001.207
05.001.208
05.001.210
05.001.212
05.001.213
05.001.214
05.001.217
05.001.218
05.001.219
05.001.220
05.001.221
05.001.222
05.001.224
05.001.225
05.001.226
05.001.227
Instruments
Trauma Recon System Handpiece, 2 ea.
Power Module, 2 ea.
Insertion Shield, 2 ea.
AO Quick Coupling for Drill Bits
Chuck with Key, Drill Speed
Chuck with Key, Ream Speed
Chuck, Keyless, Drill Speed
AO Reaming Attachment
Large Quick Coupling for Drill Bits
AO Screw Attachment
Hudson Drilling Attachment
Hudson Reaming Attachment
Trinkle Drilling Attachment
Trinkle Reaming Attachment
Modified Trinkle Drilling Attachment
Modified Trinkle Reaming Attachment
Sagittal Saw Attachment, long
Lid for Handpiece, 2 ea.
Please refer to all TRS sections for additional instruments.
11/11
2-17
Trauma Recon System
Trauma Recon System
Trauma Recon System Handpiece
Lid for Handpiece
05.001.202
Power Module
05.001.203
Insertion Shield
Synthes
Power
Equipment
05.001.201
05.001.227
Drilling Speed Attachments
05.001.205
AO Quick Coupling
Cannulation: 2.1 mm
05.001.206
Chuck with Key, Drill Speed
Cannulation: 4.1 mm
Accepts round and triangular shafts: up to 7.3 mm
Includes Key (510.191)
05.001.208
Chuck, Keyless, Drill Speed
Cannulation: 4.1 mm
11/11
2-18
Trauma Recon System
Drilling Speed Attachments — continued
Cannulation: 4.0 mm (fully open)
To insert/remove Kirschner wires and guide pins,
1.0 mm-4.0 mm diameter (any length)
05.001.217
Cannulation: 4.1 mm
Accepts cutting tools and instruments with Hudson fitting
05.001.219
Cannulation: 4.1 mm
Accepts cutting tools and instruments with Trinkle fitting
05.001.221
Cannulation: 4.1 mm
Accepts cutting tools and instruments with modified Trinkle fitting
Synthes
Power
Equipment
05.001.212
11/11
2-19
Trauma Recon System
Reaming Speed Attachments
Chuck with Key, Ream Speed
Cannulation: 4.1 mm
Includes Key (510.191)
05.001.210
AO Reaming Attachment
Cannulation: 4.1 mm
Accepts cutting tools and instruments with AO reaming fitting
05.001.213
Large Quick Coupling for Drill Bits
Max speed: 670 rpm
Max torque: 6.5 Nm
Cannulation: 4.1 mm
Accepts cutting tools and instruments with large quick coupling fitting
(includes RIA, DHS/DCS Triple Reamers)
05.001.218
Cannulation: 4.1 mm
Accepts cutting tools and instruments with Hudson fitting
05.001.220
Cannulation: 4.1 mm
Accepts cutting tools and instruments with Trinkle fitting
05.001.222
Cannulation: 4.1 mm
Accepts cutting tools and instruments with modified Trinkle fitting
11/11
Synthes
Power
Equipment
05.001.207
2-20
Trauma Recon System
Synthes
Power
Equipment
Accessories
05.001.214
AO Screw Attachment
Cannulation: 2.1 mm
Inserts screws at a maximum speed of 330 rpm
05.001.215
05.001.216
Torque Limiting Attachment, 1.5 Nm
05.001.224
Sagittal Saw Attachment, long, with key
Frequency: 11,000 oscillations per minute in “Saw” mode
Deflection: 4.5° (2.25° each side)
Includes key (05.001.229)
05.001.225
Frequency: 11,000 oscillations per minute in “Saw” mode
Stroke: 4 mm
05.001.226
11/11
2-21
Battery Power Line Sets
150.119 Battery Power Line Set
Synthes
Power
Synthes
Power
Equipment
Equipment
690.570
Graphic Case, for Battery Power Line
05.001.204
530.605
530.610
530.615
530.620
530.650
530.680
530.730
530.731
530.741
530.750
530.760
530.780
530.782
530.783
530.784
530.790
530.792
530.793
530.794
Instruments
Battery Reamer/Drill
Battery Oscillator
Battery Reciprocator
Battery, 3 ea.
Battery Insertion Shield, 3 ea.
Battery Casing, 3 ea.
Chuck with Key
Chuck, Keyless
Quick Coupling for Drill Bits
AO ASIF Reaming Attachment
Quick Coupling for K-wires
11/11
2-22
Battery Power Line Sets
Synthes
Power
Equipment
150.119TR Battery Power Line Set—Trauma
690.570
05.001.204
530.605
530.610
530.620
530.650
530.680
530.730
530.741
530.750
530.760
530.780
530.790
Instruments
Battery Oscillator
Battery, 2 ea.
Chuck with Key
AO ASIF Reaming Attachment
150.119JR Battery Power Line Set—Joint Replacement
690.570
05.001.204
530.605
530.610
530.615
530.620
530.650
530.680
530.730
530.782
530.783
530.792
530.793
Instruments
Battery Oscillator
Battery, 3 ea.
Chuck with Key
Also Available: Chuck, 340 rpm (530.732)
Large Modified Trinkle Reaming Attachment (530.795)
Battery Casing with Lock (530.681)
Graphic Case for Battery Reciprocator (690.575)
11/11
2-23
Battery Power Line
Battery Power Line
530.610
Battery Oscillator
530.615
Synthes
Power
Equipment
530.605
11/11
2-24
Battery Power Line
Synthes
Power
Equipment
Battery Power Line Accessories
530.620
Battery
Voltage: 14.4 VDC
Capacity: 2.0 Amp hours
Type: Ni MH
530.650
530.680
Battery Casing
530.681
Battery Casing with Lock
530.620
Do not sterilize batteries
530.650
530.680
530.730
530.732
530.681
Chuck with Key, 930 rpm (drilling speed)
Cannulation: 3.2 mm
Chuck with Key, 340 rpm (reaming speed)
Cannulation: 4.0 mm
Includes: key (510.191)
530.730
530.731
Chuck, Keyless
Cannulation: 3.2 mm
Accept round and triangular shafts up to 7.3 mm
530.741
530.750
Cannulation: 2.0 mm
11/11
2-25
Battery Power Line
Battery Power Line Accessories— continued
Cannulation: 3.2 mm
530.780
AO/ASIF Reaming Attachment
Cannulation: 4.0 mm
530.782
Cannulation: 4.0 mm
530.792
Cannulation: 3.2 mm
530.783
Cannulation: 4.0 mm
530.795
Large Modified Trinkle Reaming Attachment
Cannulation: 4.0 mm
530.793
Cannulation: 3.2 mm
530.784
Cannulation: 4.0 mm
530.794
Cannulation: 3.2 mm
530.790
Cannulation: 4.0 mm
11/11
Synthes
Power
Equipment
530.760
530.782
530.792
530.783
530.793
530.784
530.794
2-26
ComPact Air Drive II Set
Synthes
Power
Equipment
150.16 ComPact Air Drive II Set
60.550.030
60.550.031
60.550.032
60.550.033
Graphic Case Base Assembly, for ComPact Air Drive II Set
Lid, for ComPact Air Drive II Set Graphic Case
Attachment Rack, for ComPact Air Drive II
Insert Tray, for ComPact Air Drive II
511.701
511.73
511.75
511.761
511.785
511.791
519.51S
Instruments
ComPact Air Drive II
Chuck with key
Reduction Drive Unit
Double Air Hose, 3 meter length, with Schrader stem
Also available: Double Air Hose, 3 meter length, with AO stem (519.51)
11/11
2-27
Compact Air Drive II
511.701
Includes Cleaning Brush (519.40) and
Autoclavable Oil (519.97)
Synthes
Power
Synthes
Power
Equipment
Equipment
Accessories
511.785
511.786
Reduction Drive Unit
Reduction Drive Unit with Reverse
For intramedullary and acetabular reaming
Cannulation: 3.2 mm
511.80
Oscillating Saw Attachment
Includes key (518.09)
511.801
Oscillating Saw Attachment II
511.902
11/11
511.785
2-28
Accessories — continued
Chuck with key
Cannulation: 3.2 mm
Includes key (510.191)
511.731
Chuck, keyless
511.75
Allows use of Oscillating Drill Attachment and Radiolucent Drive
Cannulation: 2.0 mm
511.761
Accepts DHS and DCS Triple Reamers
Accepts large quick-coupling drill bits
Cannulation: 3.2 mm
Synthes
Power
Equipment
511.73
Adaptors for Reduction Drive Unit (511.785 and 511.786)
Accept competitive intramedullary and acetabular reamers
511.782
Hudson Adaptor
511.783
Modified Trinkle Adaptor
511.784
Trinkle Adaptor
11/11
2-29
Accessories — continued
For insertion of K-wires from 0.6 mm to 3.2 mm in diameter
Cannulation: 3.2 mm
511.770
511.771
Torque Limiting Attachment, 4 Nm
518.01
518.09
Oscillating Bone Saw, with double hose connector
Replacement Chuck Key for Oscillating Bone Saw
Synthes
Power
Synthes
Power
Equipment
Equipment
511.791
11/11
2-30
Power Equipment Accessories
Universal Battery Charger II and Batteries
Synthes
Power
Equipment
05.001.204
05.001.140
Medical Grade Power Cord, three prongs, clear plug
Do Not Sterilize Batteries or Battery Charger
530.200
Battery
For Power Drive (530.100)
Voltage: 12 VDC
Type: NiCd
To be charged with UBC Charger (530.601)
530.250
530.280
Battery Casing
530.200
530.250
530.620
Battery
Voltage: 14.4 VDC
Type: Ni MH
530.650
530.680
Battery Casing
530.681
Battery Casing with Lock
530.280
530.620
Do not sterilize batteries
530.650
530.680
530.681
11/11
2-31
Universal Battery Charger II and Batteries— continued
12 V Battery
Voltage: 12 VDC
Type: NiCd
532.033
14.4 V Battery
Voltage: 14.4 VDC
Type: NiCd
532.004
532.002
Battery Casing
For 12 V Battery
532.032
Battery Casing
For 14.4 V Battery
532.003
532.033
532.004
532.002
05.001.202
Power Module
For Trauma Recon System
Voltage: 25.2 V
Type: Li-Ion
05.001.203
05.001.227
Insertion Shield
Lid for Handpiece
532.032
05.001.202
05.001.203
05.001.227
11/11
Synthes
Power
Equipment
532.003
2-32
Attachments and Accessories
Replacement Key for Large Chucks
510.20
Right Angle Drive
For use with Trauma Recon System Attachment (05.001.210),
or ComPact Air Drive II Attachments (511.785 or 511.786)
511.20
Oscillating Drill Attachment
For use with ComPact Air Drive II
with Quick Coupling for drill bits (511.75)
511.30
Radiolucent Drive
For use with ComPact Air Drive II
with Quick Coupling for drill bits (511.75); or Small
Battery Drive with Quick Coupling for drill bits (05.001.250)
and Adaptor (532.031); or Battery Power Line,
with Adaptor (530.741); or Trauma Recon System,
with Adaptor (05.001.226)
Synthes
Power
Equipment
510.191
Three-Fluted Drill Bits for Radiolucent Drive, 14 mm flute length, quick coupling
Diameter
Length
511.411
2.0 mm
150 mm
511.412
511.413
511.431
511.414
511.415
511.416
511.432
511.417
511.418
Brad Point
2.5 mm
2.7 mm
3.2 mm
3.2 mm
3.5 mm
3.6 mm
4.0 mm
4.0 mm
4.5 mm
150 mm
150 mm
105 mm
150 mm
150 mm
150 mm
105 mm
150 mm
150 mm
03.010.100
03.010.101
03.010.102
Three-Fluted Drill Bits, for Radiolucent Drive〫
quick coupling, needle point, 145 mm
3.2 mm
4.2 mm
5.0 mm
〫Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
11/11
2-33
Attachments and Accessories— continued
Torque Limiting Attachments
0.4 Nm, quick coupling
1.5 Nm, for ComPact Air Drive II
1.5 Nm, for Trauma Recon System
511.771
511.774
05.001.216
4 Nm, for ComPact Air Drive II
4 Nm, for AO Reaming Coupler
4.0 Nm, for Trauma Recon System
511.904
Sternum Top
For use with Reciprocating Saw Attachments (511.902 and 05.001.225)
and Reciprocating Saw Blade (511.915S)
519.40
Cleaning Brush, 3.6 mm diameter, 187 mm length
For Small Battery Drive and ComPact Air Drive II Systems
516.101
Cleaning Brush, 4.7 mm diameter, 322 mm length
For Battery Power Line and Trauma Recon Systems
11/11
Synthes
Power
Equipment
511.777
511.776
511.770
511.773
05.001.215
2-34
Synthes
Power
Equipment
Chucks and Replacement Keys
310.90
Mini Quick Coupling Chuck
For use with Small Air Drill (511.10 or 511.11)
and Quick Coupling for drill bits
310.93
Small Chuck with Key
For use with Small Air Drill (511.10 or 511.11)
and Quick Coupling for drill bits
Also used with Handle (311.43) or T-Handle (311.44)
Accepts round shafts to 4.0 mm
in diameter with Chuck shafts to
4.5 mm in diameter
310.93K
Replacement Key
For Small Chuck (310.93)
338.49
Large Quick Coupling Chuck
For use with Small Air Drill (511.10 or 511.11) and
Accommodates the DHS/DCS Triple Reamers
and large cannulated drill bits
351.16J
Flexible Shaft Connector, for chuck, cannulated
11/11
2-35
Double Air Hoses
All double air hoses are autoclavable; do not connect both ends
when autoclaving.
519.50
519.51
519.53
Synthes
Power
Equipment
Synthes Stem
Hoses connect to each other and to
machines with a double hose connector
2 meters length
3 meters
5 meters
Synthes Stem
Schrader Stem
Connect to machines with a double hose connector
for use with a Schrader system
519.50S
519.51S
519.53S
2 meters length
3 meters
5 meters
Schrader Stem
DISS Fitting
Connect to machines with a double hose connector
for use with a DISS system
519.50D
519.51D
519.53D
2 meters length
3 meters
5 meters
DISS hand-tight nut
11/11
2-36
Synthes
Power
Equipment
Accessories
519.97
Autoclavable Oil
Dispenser with autoclavable oil which
does not harden during sterilization
Not to be used with Pen Drive systems.
Use Autoclavable Oil for Pen Drive Systems (05.001.095)
05.001.095
Autoclavable Oil for Pen Drive Systems
519.97
05.001.095
Regulators
520.89
Nitrogen Regulator
Complete with couplers
For use with all Synthes air equipment
Regulator will accept both Synthes (quickconnect) and Schrader hose connectors.
Input is standard C.G.A. nitrogen tank fitting.
520.89R
Nitrogen Regulator
Regulator with Synthes fitting only
520.89Y
“Y” Fitting
To adapt nitrogen regulators to accept both Synthes
and Schrader hose fittings
11/11
2-37
Saw Blades for Oscillating Saws
Saw Blades, calibrated, sterile
Length
25 mm
25 mm
25 mm
50 mm
50 mm
50 mm
50 mm
70 mm
70 mm
70 mm
70 mm
70 mm
70 mm
Cutting
Thickness
0.6 mm
0.6 mm
0.6 mm
0.6 mm
0.6 mm
0.6 mm
0.6 mm
1.2 mm
1.0 mm
0.8 mm
1.0 mm
1.2 mm
0.8 mm
Synthes
Power
Equipment
519.230S
519.103S
519.250S
519.104S
519.150S
519.105S
519.100S
519.113S
519.106S
519.170S
519.200S
519.210S
519.190S
Width
6 mm
10 mm
14 mm
10 mm
14 mm
20 mm
27 mm
18 mm
19 mm
27 mm
27 mm
27 mm
50 mm
519.100S
519.103S
519.104S
519.105S
519.106S
519.113S
519.150S
519.170S
519.190S
519.200S
519.250S
11/11
519.210S
519.230S
2-38
Saw Blades for Oscillating Saws— continued
Synthes
Power
Equipment
Saw Blades, calibrated, self-centering, sterile
05.002.201S
519.118S
05.002.405S
05.002.202S
05.002.203S
05.002.204S
05.002.205S
Width
12.5 mm
12.5
12.5
12.5
12.5
12.5
12.5
Calibrated
Length
90 mm
90
90
90
90
90
90
Cutting
Thickness
0.89 mm
0.90
1.00
1.19
1.27
1.37
1.47
05.002.006S
05.002.001S
519.107S
05.002.007S
05.002.008S
05.002.002S
519.114S
05.002.003S
05.002.004S
519.116S
05.002.005S
19 mm
19
19
19
19
19
19
19
19
19
19
80 mm
95
95
95
95
95
95
95
95
95
95
0.89 mm
0.89
0.90
1.00
1.07
1.19
1.25
1.27
1.37
1.40
1.47
05.002.301S
05.002.306S
05.002.302S
05.002.303S
05.002.304S
05.002.305S
19-12.5 mm*
19–12.5
19-12.5
19-12.5
19-12.5
19-12.5
90 mm
90
90
90
90
90
0.89 mm
1.00
1.19
1.27
1.37
1.47
05.002.501S
519.109S
25 mm
25
60 mm
60
0.89 mm
0.90
519.118S
05.002.001S
05.002.302S
519.109S
05.002.101S
519.108S
05.002.106S
05.002.107S
05.002.102S
519.115S
05.002.103S
05.002.104S
519.117S
05.002.105S
05.002.401S
25 mm
25
25
25
25
25
25
25
25
25
25
95 mm
95
95
95
95
95
95
95
95
95
85
0.89 mm
0.90
1.00
1.07
1.19
1.25
1.27
1.37
1.40
1.47
1.47
05.002.101S
05.002.401S
* Cutting width-shaft width
11/11
2-39
Saw Blades for Oscillating Saws— continued
Saw Blades for joint replacement, calibrated, aggressive cut, sterile
Calibrated
Length
90 mm
90
90
90
90
90
90
Cutting
Thickness
0.89 mm
1.00
1.07
1.19
1.27
1.37
1.47
05.003.110S
05.003.112S
05.003.113S
05.003.114S
05.003.116S
05.003.117S
05.003.119S
19 mm
19
19
19
19
19
19
90 mm
90
90
90
90
90
90
0.89 mm
1.00
1.07
1.19
1.27
1.37
1.47
05.003.120S
05.003.122S
05.003.123S
05.003.124S
05.003.126S
05.003.127S
05.003.129S
19–12.5 mm
19–12.5
19–12.5
19–12.5
19–12.5
19–12.5
19–12.5
90 mm
90
90
90
90
90
90
0.89 mm
1.00
1.07
1.19
1.27
1.37
1.47
05.003.130S
05.003.132S
05.003.133S
05.003.134S
05.003.136S
05.003.137S
05.003.139S
25 mm
25
25
25
25
25
25
90 mm
90
90
90
90
90
90
0.89 mm
1.00
1.07
1.19
1.27
1.37
1.47
11/11
Synthes
Power
Equipment
05.003.100S
05.003.102S
05.003.103S
05.003.104S
05.003.106S
05.003.107S
05.003.109S
Width
12.5 mm
12.5
12.5
12.5
12.5
12.5
12.5
2-40
Saw Blades
Synthes
Power
Equipment
Saw Blades, sterile, for Large Reciprocating Saw Attachments
511.915S
Cutting
Length
40 mm
Cutting
Thickness
1.1 mm
511.907S
511.909S
55 mm
55
1.05 mm
0.85
511.914S
511.913S
511.912S
68 mm
68
68
0.80 mm (double-sided)
1.00
(double-sided)
1.10
(double sided)
511.906S
70 mm
1.27 mm
511.905S
80 mm
1.05 mm
Saw Blades for Small Battery Drive
Saw Blades, sterile, for Small Battery Drive
532.041S
532.042S
532.043S
532.044S
532.045S
532.046S
532.047S
532.048S
Width
6 mm
10
16
4
8
12
6
10
Calibrated
Length
10 mm
10
10
15
20
20
30
30
Cutting
Thickness
0.4 mm
0.4
0.4
0.4
0.4
0.4
0.4
0.4
532.061S
532.062S
532.063S
532.064S
532.065S
532.066S
532.067S
6 mm
10
14
10
14
20
27
25 mm
25
25
50
50
50
50
0.6 mm
0.6
0.6
0.6
0.6
0.6
0.6
532.044S
532.048S
532.067S
11/11
2-41
Parallel Saw Blades for Small Battery Drive
532.091S
532.092S
532.093S
532.094S
532.095S
45° parallel cut
2.0 mm shortening
2.5 mm shortening
3.0 mm shortening
4.0 mm shortening
5.0 mm shortening
Power
Equipment
532.081S
532.082S
532.083S
532.084S
532.085S
Parallel Saw Blades
90° parallel cut
2.0 mm shortening
2.5 mm shortening
3.0 mm shortening
4.0 mm shortening
5.0 mm shortening
532.081S
532.082S
532.083S
532.084S
532.085S
532.091S
532.092S
532.093S
532.094S
532.095S
11/11
2-42
Synthes
Power
Equipment
Saw Blades
03.000.314S
03.000.300S
03.000.301S
03.000.302S
03.000.303S
03.000.304S
03.000.305S
03.000.306S
03.000.307S
03.000.317
03.000.308S
03.000.309S
03.000.310S
03.000.315S
Saw Blades, for Pen Drive Sagittal Saw (05.001.039), sterile
18 mm x 2.5 mm x 0.38 mm
18 mm x 4.0 mm x 0.38 mm
15 mm x 6.0 mm x 0.38 mm
31 mm x 6.0 mm x 0.38 mm
22 mm x 8.0 mm x 0.38 mm
15 mm x 10 mm x 0.38 mm
31 mm x 10 mm x 0.38 mm
22 mm x 12 mm x 0.38 mm
15 mm x 16 mm x 0.38 mm
22 mm x 8.0 mm x 0.4 mm (nonsterile only)
27 mm x 6.0 mm x 0.6 mm
27 mm x 10 mm x 0.6 mm
27 mm x 14 mm x 0.6 mm
43 mm x 20 mm x 0.6 mm
03.000.311S
03.000.312S
03.000.313S
03.000.316S
Saw Blades, crescentic, for Pen Drive Oscillating Saw (05.001.038)
and Small Battery Drive Oscillating Saw (532.023), sterile
26.5 mm x 13.3 mm x 0.6 mm
25 mm x 16.3 mm x 0.6 mm
30 mm x 17.9 mm x 0.6 mm
30 mm x 21.9 mm x 0.6 mm
03.000.320S
03.000.321S
03.000.327S
03.000.334S
03.000.335S
Saw Blades, for Pen Drive Reciprocating Saw (05.001.040), sterile
13 mm x 6.4 mm/2.9 mm x 0.6 mm, trapezoid
20 mm x 6.4 mm/2.9 mm x 0.6 mm, trapezoid, long
27 mm x 6.4 mm/2.9 mm x 0.6 mm, trapezoid, long
03.000.322S
03.000.324S
7.0 mm x 4.0 mm x 0.6 mm
14.5 mm x 4.0 mm x 0.6 mm
03.000.325S
25 mm x 5.5 mm x 0.6 mm, for rhinoplasty
03.000.323S
03.000.326S
03.000.328S
14 mm x 6.4 mm x 0.6 mm
27 mm x 6.4 mm x 0.6 mm
33.5 mm x 6.4 mm x 0.6 mm
03.000.329S
34.5 mm x 5.0 mm/2.5 mm x 0.6 mm, crescent-shaped, ascending
03.000.330S
03.000.331S
03.000.332S
33.5 mm x 6.4 mm x 0.6 mm, with offset downwards
33.5 mm x 6.4 mm x 0.6 mm, with offset to the right
33.5 mm x 6.4 mm x 0.6 mm, with offset to the left
03.000.336S
03.000.337S
13 x 3 x 0.4 mm, thin
20 x 3 x 0.4 mm, thin
03.000.338S
03.000.339S
9.2 x 7.3 x 0.6 mm, left, Intrabuccal Osteotomy
9.2 x 7.3 x 0.6 mm, right, Intrabuccal Osteotomy
03.000.314S
03.000.302S
03.000.308S
03.000.321S
03.000.329S
03.000.334S
03.000.338S
11/11
2-43
Saw Blades — continued
Saw Blades for Small Battery Drive
03.000.390
03.000.391
03.000.392
03.000.393
03.000.394
03.000.395
03.000.396
Crescentic Saw Blades,
for Small Battery Drive Large Oscillating Saw Attachment (532.026)
Radius
Depth
Thickness
12 mm
45 mm
0.6 mm
15
45
0.6
18
45
0.6
21
45
0.6
24
45
0.6
27
50
0.6
30
50
0.6
11/11
Synthes
Power
Equipment
03.000.340S
03.000.343S
03.000.342S
03.000.341S
Saw Blades, 105° angled, 70 mm shaft, sterile
for Pen Drive Oscillating Saw (05.001.038) and Small Battery
Drive Oscillating Saw (532.023)
7.0 mm x 12 mm x 0.4 mm
12.0 mm x 4.5 mm x 0.4 mm
12.0 mm x 9.5 mm x 0.4 mm
12.0 mm x 11.5 mm x 0.4 mm
2-44
Cutting Tools for Electric Pen Drive and Air Pen Drive
Synthes
Power
Equipment
Burrs
03.000.000S
03.000.001S
03.000.002S
Round Burrs, sterile
Diameter
S
1.0 mm
M
1.0
L
1.0
03.000.012S
03.000.013S
03.000.014S
S
M
L
Diameter
4.0 mm
4.0
4.0
03.000.003S
03.000.004S
03.000.005S
S
M
L
1.5
1.5
1.5
03.000.015S
03.000.016S
03.000.017S
S
M
L
5.0
5.0
5.0
03.000.230S
03.000.231S
03.000.232S
S
M
L
2.0
2.0
2.0
03.000.018S
03.000.019S
03.000.020S
S
M
L
6.5
6.5
6.5
03.000.006S
03.000.007S
03.000.008S
S
M
L
2.5
2.5
2.5
03.000.021S
03.000.022S
03.000.023S
S
M
L
8.0
8.0
8.0
03.000.009S
03.000.010S
03.000.011S
S
M
L
3.0
3.0
3.0
03.000.030S
03.000.031S
03.000.032S
Round Burrs, diamond-coated, sterile
Diameter
03.000.045S
S
1.0 mm
03.000.046S
M
1.0
03.000.047S
L
1.0
S
M
L
Diameter
3.5 mm
3.5
3.5
03.000.033S
03.000.034S
03.000.035S
S
M
L
1.5
1.5
1.5
03.000.048S
03.000.049S
03.000.050S
S
M
L
4.0
4.0
4.0
03.000.036S
03.000.037S
03.000.038S
S
M
L
2.0
2.0
2.0
03.000.051S
03.000.052S
03.000.053S
S
M
L
5.0
5.0
5.0
03.000.039S
03.000.040S
03.000.041S
S
M
L
2.5
2.5
2.5
03.000.054S
03.000.055S
03.000.056S
S
M
L
6.0
6.0
6.0
03.000.042S
03.000.043S
03.000.044S
S
M
L
3.0
3.0
3.0
03.000.233S
03.000.234S
03.000.235S
03.000.060S
03.000.061S
03.000.062S
03.000.063S
03.000.064S
03.000.065S
03.000.066S
03.000.067S
03.000.068S
Acorn-shaped Burrs, sterile
Diameter
Head Length
S
5.0 mm
6.7 mm
M
5.0
6.7
L
5.0
6.7
S
6.0
8.0
M
6.0
8.0
L
6.0
8.0
S
7.5
9.5
M
7.5
9.5
L
7.5
9.5
S
9.0
11.4
M
9.0
11.4
L
9.0
11.4
11/11
2-45
Burrs — continued
03.000.236S
03.000.237S
03.000.238S
03.000.076S
03.000.077S
03.000.078S
03.000.079S
03.000.080S
03.000.081S
Pear-shaped Burrs, sterile
Diameter
Head Length
S
4.0 mm
6.9 mm
M
4.0
6.9
L
4.0
6.9
S
5.0
8.3
M
5.0
8.3
L
5.0
8.3
S
6.0
9.7
M
6.0
9.7
L
6.0
9.7
03.000.239S
03.000.240S
03.000.241S
03.000.082S
03.000.083S
03.000.084S
03.000.242S
03.000.243S
03.000.244S
Barrel-shaped Burrs, sterile
Diameter
Head Length
S
4.0 mm
9.0 mm
M
4.0
9.0
L
4.0
9.0
S
5.0
10
M
5.0
10
L
5.0
10
S
6.0
11
M
6.0
11
L
6.0
11
03.000.085S
03.000.086S
03.000.087S
03.000.088S
03.000.089S
03.000.090S
03.000.091S
03.000.092S
03.000.093S
Fissure Burrs, tapered, carbide, sterile
Diameter
Head Length
S
1.6 mm
4.5 mm
M
1.6
4.5
L
1.6
4.5
S
2.3
5.2
M
2.3
5.2
L
2.3
5.2
S
2.6
6.8
M
2.6
6.8
L
2.6
6.8
11/11
Synthes
Power
Equipment
03.000.070S
03.000.071S
03.000.072S
03.000.073S
03.000.074S
03.000.075S
Egg-shaped Burrs, sterile
Diameter
Head Length
S
4.0 mm
8.0 mm
M
4.0
8.0
L
4.0
8.0
S
5.5
10
M
5.5
10
L
5.5
10
2-46
Synthes
Power
Equipment
Burrs— continued
03.000.094S
03.000.095S
03.000.096S
03.000.097S
03.000.098S
03.000.099S
Fissure Burrs, cylindrical, carbide, sterile
Diameter
Head Length
S
1.6 mm
4.3 mm
M
1.6
4.3
L
1.6
4.3
S
3.0
16
M
3.0
16
L
3.0
16
03.000.100S
03.000.101S
03.000.102S
Inverted Cone Burrs, sterile
Diameter
Head Length
S
6.5 mm
6.1 mm
M
6.5
6.1
L
6.5
6.1
03.000.245S
03.000.246S
03.000.247S
03.000.103S
03.000.104S
03.000.105S
03.000.106S
03.000.107S
03.000.108S
Drum-shaped Burrs, sterile
Diameter
Head Length
S
4.7 mm
7.9 mm
M
4.7
7.9
L
4.7
7.9
S
6.0
7.9
M
6.0
7.9
L
6.0
7.9
S
9.1
7.9
M
9.1
7.9
L
9.1
7.9
03.000.109S
03.000.110S
03.000.111S
Circular Burrs, diamond-coated, sterile
Diameter
Head Length
S
25.0 mm
0.7 mm
M
25.0
0.7
L
25.0
0.7
11/11
2-47
Burrs— continued
03.000.124S
03.000.125S
03.000.126S
Cranial Burrs, sterile
Diameter
Head Length
S
1.8 mm
11 mm for Craniotome 05.001.051
M
2.2 mm
L
3.0 mm
03.000.127S
03.000.128S
03.000.129S
03.000.130S
03.000.131S
03.000.132S
03.000.248S
03.000.249S
03.000.250S
Pin-shaped Burrs, sterile
Diameter
Head Length
S
1.4 mm
6.0 mm
M
1.4
6.0
L
1.4
6.0
S
2.1
12
M
2.1
12
L
2.1
12
S
3.0
19.5
M
3.0
19.5
L
3.0
19.5
03.000.133S
03.000.134S
03.000.135S
03.000.136S
03.000.137S
03.000.138S
03.000.139S
03.000.140S
03.000.141S
Neuro Burrs, sterile
Diameter
Head Length
S
1.7 mm
2.3 mm
M
1.7
2.3
L
1.7
2.3
S
2.2
3.7
M
2.2
3.7
L
2.2
3.7
S
2.9
3.8
M
2.9
3.8
L
2.9
3.8
11/11
Synthes
Power
Equipment
03.000.115S
03.000.116S
03.000.117S
03.000.118S
03.000.119S
03.000.120S
03.000.121S
03.000.122S
03.000.123S
03.000.160S
03.000.161S
03.000.162S
Swanson Burrs, sterile
Diameter
Head Length
S
2.0 mm
6.3 mm
M
2.0
6.3
L
2.0
6.3
S
3.0
9.7
M
3.0
9.7
L
3.0
9.7
S
4.0
12.7
M
4.0
12.7
L
4.0
12.7
S
5.0
15.8
M
5.0
15.8
L
5.0
15.8
2-48
Synthes
Power
Equipment
Cutting Tools
03.000.112S
03.000.113S
03.000.114S
Lindemann Reamers, sterile
Diameter
Head Length
S
2.3 mm
20.2 mm
M
2.3
20.2
L
2.3
20.2
03.000.142S
03.000.143S
03.000.144S
03.000.145S
03.000.146S
03.000.147S
03.000.148S
03.000.149S
03.000.150S
03.000.151S
03.000.152S
03.000.153S
Drill Bits, sterile
Diameter
S
1.0 mm
M
1.0
S
1.1
M
1.1
S
1.3
M
1.3
S
1.5
M
1.5
S
2.0
M
2.0
S
2.5
M
2.5
03.000.154S
03.000.155S
03.000.156S
03.000.157S
03.000.158S
03.000.159S
Wire-Pass Drill Bits, sterile
Diameter
Head Length
S
1.1 mm
5.0 mm
M
1.1
5.0
S
1.5
7.0
M
1.5
7.0
S
2.0
7.0
M
2.0
7.0
03.000.360S
03.000.361S
03.000.362S
03.000.363S
Rasps, sterile, for Pen Drive Reciprocating Saw (05.001.040)
small
crosscut
large
crosscut
small
large
03.000.364S
03.000.365S
Broaches, sterile
small
proximal
small
distal
19 mm x 4.5 mm x 4.5 mm
16 mm x 6 mm x 6 mm
11/11
2-49
Cutting Tools with mini quick and J-latch couplings
Coupling
mini quick
mini quick
mini quick
J-latch
J-latch
J-latch
03.000.173S
03.000.174S
03.000.175S
03.000.176S
03.000.203S
03.000.204S
03.000.205S
03.000.206S
Egg-shaped Burrs, sterile
Diameter
Head Length
7.0 mm
28 mm
7.0
45
8.0
28
8.0
45
7.0
28
7.0
45
8.0
28
8.0
45
Coupling
mini quick
mini quick
mini quick
mini quick
J-latch
J-latch
J-latch
J-latch
03.000.177S
03.000.178S
03.000.179S
03.000.180S
03.000.181S
03.000.182S
03.000.207S
03.000.208S
03.000.209S
03.000.210S
03.000.211S
03.000.212S
Conical Burrs, sterile
Diameter
Head Length
5.0 mm
23 mm
5.0
28
5.0
45
6.0
24
6.0
28
6.0
45
5.0
23
5.0
28
5.0
45
6.0
24
6.0
28
6.0
45
Coupling
mini quick
mini quick
mini quick
mini quick
mini quick
mini quick
J-latch
J-latch
J-latch
J-latch
J-latch
J-latch
03.000.183S
03.000.184S
03.000.185S
03.000.186S
03.000.187S
03.000.188S
03.000.213S
03.000.214S
03.000.215S
03.000.216S
03.000.217S
03.000.218S
Pear-shaped Burrs, sterile
Diameter
Head Length
5.0 mm
23 mm
5.0
28
5.0
45
6.0
24
6.0
28
6.0
45
5.0
23
5.0
28
5.0
45
6.0
24
6.0
28
6.0
45
Coupling
mini quick
mini quick
mini quick
mini quick
mini quick
mini quick
J-latch
J-latch
J-latch
J-latch
J-latch
J-latch
11/11
Synthes
Power
Equipment
03.000.170S
03.000.171S
03.000.172S
03.000.200S
03.000.201S
03.000.202S
Round Burrs, sterile
Diameter
Head Length
3.0 mm
28 mm
3.0
45
5.0
45
3.0
28
3.0
45
5.0
45
2-50
Synthes
Power
Equipment
Cutting Tools with mini quick and J-latch couplings— continued
03.000.189S
03.000.190S
03.000.191S
03.000.192S
03.000.219S
03.000.220S
03.000.221S
03.000.222S
Fissure Burrs, tapered, sterile
Diameter
Head Length
2.1 mm
31 mm
2.1
45
3.2
31
3.2
45
2.1
31
2.1
45
3.2
31
3.2
45
Coupling
mini quick
mini quick
mini quick
mini quick
J-latch
J-latch
J-latch
J-latch
03.000.193S
03.000.194S
03.000.195S
03.000.196S
03.000.223S
03.000.224S
03.000.225S
03.000.226S
Circular Burrs, sterile
Diameter
Head Length
8.0 mm
28 mm
10.0
28
12.0
28
15.0
28
8.0
28
10.0
28
12.0
28
15.0
28
Coupling
mini quick
mini quick
mini quick
mini quick
J-latch
J-latch
J-latch
J-latch
03.000.197S
03.000.227S
Lindemann Reamers
Diameter
Head Length
2.3 mm
45 mm
2.3
45
Coupling
mini quick
J-latch
11/11
2-51
Accessories
For Mini Compressed Air Machine
512.55
Saw Blade, 26 mm length, 0.65 mm thick
For Mini Reciprocating Saw
513.01
513.03
Cutting Tools, with mini quick coupling
1.1 mm Drill Bit, 28 mm
513.05
513.08
513.10
513.13
513.14
513.17
513.19
11/11
Synthes
Power
Equipment
512.77
512.78
512.79
Saw Blades for Mini Oscillating Saw, 0.25 mm thick
Width
Length
6 mm
13 mm
8 mm
13 mm
8 mm
18 mm
2-52
Graphic Cases
Graphic Cases for Electric Pen Drive
Synthes
Power
Equipment
690.580
690.581
690.582
690.583
690.585
68.000.007
Graphic Case for Electric Pen Drive
The standard graphic case for the Electric Pen Drive set has a
removable attachment rack that houses 24 attachments. The
bottom of the graphic case houses the pen, cable and hand
switch and includes an auxiliary bin.
Graphic Case Replacement Accessories
Lid for Graphic Case
Attachment Rack for Graphic Case
Insert Tray for Graphic Case
Graphic Case Base
Support for Cutting Tools
Modular Graphic Cases for Electric Pen Drive Set
The modular graphic cases for the Electric Pen Drive set are designed
to meet various Electric Pen Drive set configurations in a compact case.
690.586
690.596
690.597
690.587
690.588
Graphic Cases
Three Level Modular Graphic Case (includes lid)
Single Level Modular Graphic Case (includes lid)
Two Level Modular Graphic Case (includes lid)
Insert Trays
Insert Tray for 60,000 rpm Drive Unit
Auxiliary bin holds one module insert
Attachment Tray Assembly
Designed to house any combination of attachments
for the Electric Pen Drive
690.586
Modules
Module inserts are available to customize insert trays to house selected
attachments. Two (2) modular compartments can be customized to fit small or
large Electric Pen Drive attachments. The attachment tray assembly can hold up to
four (4) module inserts. Module inserts include dividers and screws for proper
insertion onto tray. Divider inserts snap easily into place, and can be removed for
easy adjustment. Labels are also available to provide easy identification of
attachments within the modules.
690.578
690.579
306.763
690.578.04
690.589
Module Insert, 4 Compartments (includes dividers and screws)
Module Insert, 2 Compartments (includes dividers and screws)
Accessories
Label Sheet for Electric Pen Drive Module
Divider Kit for Module Insert (for extra divider inserts
and screws)
Lid for Modular Graphic Case
690.578 and 690.579
11/11
2-53
Graphic Cases
Graphic Cases for Battery Power Line
Graphic Case for Battery Power Line Set
The attachment rack for the Battery Power line graphic case also
serves as a stand for the Battery Reamer/Drill, Battery Oscillator,
and Battery Reciprocator handpieces, and can be used to facilitate
instrument insertion and removal.
690.575
Graphic Case for Battery Power Line Reciprocator
The Battery Reciprocator Graphic Case houses
the Battery Reciprocator handpiece, one insertion shield
and one battery casing.
690.571
690.572
690.573
690.574.04
Accessories
Lid for Battery Power line Graphic Case
Attachment Rack for Battery Power line Graphic Case
Insert Tray for Battery Power line Graphic Case
Grommets for Attachment Rack for Battery Power line Graphic Case,
4-Pack
Graphic Case for Trauma Recon System
60.550.140
60.550.141
60.550.143
Graphic Case, Nylon, for Trauma Recon System
Lid, Nylon, for Trauma Recon System Graphic Case
Insert Tray, for Trauma Recon System Graphic Case
Washing Basket for Trauma Recon System
68.001.605
68.001.602
Washing Machine Basket for 2 TRS Handpieces
Lid for Washing Machine Basket
11/11
Power
Equipment
690.570
690.575
2-54
Graphic Cases
Graphic Cases for Small Battery Drive
Power
Equipment
The Small Battery Drive graphic case options allow cases to be ordered
for various set configurations.
The standard graphic case configuration includes base, lid, attachment
rack and three insert trays. Customers can choose up to 2 insert trays
from Option 1 and 1 insert tray from Option 2 to configure the case
to meet their individual needs.
01.001.501
Graphic Case Set for Small Battery Drive Set
(includes 60.550.010, 60.550.011, 60.550.012,
60.550.013, 60.550.014 and 60.550.016)
60.550.010
60.550.011
60.550.012
Base Assembly for Small Battery Drive Graphic Case
Lid for Small Battery Drive Graphic Case
Attachment Rack for Small Battery Drive Graphic Case
Choose up to 2 trays from Option 1
60.550.013 Insert Tray for 12 V Battery Casings
60.550.014 Insert Tray for 14.4 V Battery Casings
60.550.015 Insert Tray for Small Battery Drive Adaptor
Choose 1 tray from Option 2
60.550.016 Insert Tray for Small Battery Drive Handpiece
and Radiolucent Drive
60.550.017 Insert Tray for Two Small Battery Drive Handpieces
690.576.04
60.550.010
Accessories
Grommets for Attachment Rack for
Small Battery Drive Graphic Case, 4-Pack
690.525
Small Graphic Case for Small Battery Drive Set
The small graphic case for Small Battery Drive set
offers a compact, lightweight graphic case option
to have a basic set including a handpiece, casings
and a few attachments.
690.355
Graphic Case for Small Battery Drive
60.550.013
690.355
60.550.014
60.550.016
11/11
2-55
Compartmental Pressure Monitoring System
150.001 Compartmental Pressure Monitoring System
Synthes
Power
Equipment
306.001
Carrying Case, for Compartmental Pressure Monitoring System
530.411
530.412
530.413
Instruments
Monitor
Probe
Extension Cable
11/11
Manufacturer
The Anspach Effort, Inc.
4500 Riverside Drive
Palm Beach Gardens, FL 33410
Telephone: (561) 627-1080
To order: (800) 327-6887
Fax: (800) 327-6661
E-mail: [email protected]
Anspach Europe Ltd.
Aston Court, Kingsmead Business Park
Frederick Place, High Wycombe
HP 11 1LA, United Kingdom
Telephone: +441 494 616126
Fax: +441 494 616001
www.synthes.com
www.anspach.com
N-1
Numerical Index
2: 54
2: 2
2: 3
2: 4
2: 16
2: 44
2: 45
2: 46
2: 48
2: 47
2: 48
2: 47
2: 49
2: 50
2: 49
2: 50
2: 44
2: 45
2: 46
2: 47
2: 42
2: 43
2: 48
2: 43
2: 32
2: 6
2: 7
2: 6
2: 7
2: 6
2: 7
2: 8
2: 9
2: 8
2: 10
2: 9
2: 10
2: 5
2: 10
2: 36
2: 10
2: 9
2: 10
2: 9
2: 7
2: 9
2: 8
2: 10
2: 9
2: 8
2: 30
2: 9
2: 8
2: 9
2: 17
2: 30
Section numbers are listed in bold.
11/11
05.001.207
05.001.208
05.001.210
05.001.212
05.001.213
05.001.214–.216
05.001.217, .219
05.001.218, .220
05.001.221
05.001.222
05.001.224–.226
05.001.227
05.001.250–.254
05.002.201S–.405S
05.003.100S–.139S
105.954, .955
150.001
150.119
150.119TR
150.119JR
150.16
306.763
310.90–.93K
338.49
351.16J
510.191
510.20
511.20, .30
511.411–.418
511.701
511.770–.777
511.73–.784
511.785, .786
511.791
511.80–.902
511.904
511.905S–.915S
512.55
512.77–.79
513.01–.19
516.101
518.01, .09
519.100S–.106S
519.107S–.109S
519.113S
519.114S–.118S
519.150S–.250S
519.40
519.50–.53S
519.97
520.89–.89Y
530.200–.280
530.605
530.610, .615
530.620–.681
530.730–.732
2: 19
2: 17
2: 19
2: 18
2: 19
2: 20
2: 18
2: 19
2: 18
2: 19
2: 20
2: 17, 31
2: 13
2: 38
2: 39
2: 11
2: 55
2: 21
2: 22
2: 22
2: 26
2: 52
2: 34
2: 34
2: 34
2: 32
2: 32
2: 32
2: 32
2: 27
2: 29, 33
2: 28
2: 27
2: 29
2: 27
2: 33
2: 40
2: 51
2: 51
2: 51
2: 33
2: 29
2: 37
2: 38
2: 37
2: 38
2: 37
2: 33
2: 35
2: 36
2: 36
2: 30
2: 23
2: 23
2: 24, 30
2: 24
530.741
530.750
530.760–.790
532.002–.012
532.015
532.017–.022
532.023–.031
532.032, .033
532.041S–.067S
532.081S–.095S
60.550.010–.017
60.550.050
60.550.140–.550.143
68.000.007
68.001.002
68.001.605
690.355
690.525
690.570–.575
690.576.04
690.578–.597
ACB
A-CRN
A-CRN-M
A-CRN-S
ADG
ADG-10
ADG-11
ADG-13
ADG-155
AL-III-30
AL-III-DISS-20
AL-III-DISS-30
AL-III-IRR-MA7
AUTOLUBE-III
AUTOLUBE-III-20
AUTOLUBE-III-DISS
AUTOLUBE-III-FG
AUTOLUBE-III-FG7
AUTOLUBE-III-IRR
AUTOLUBE-III-MA7
AUTOLUBE-III-NK
B-BLACK
B-BLUE-S
B-CASE-TRAY
B-COLLECTOR-1
B-COLLECTOR-BX
B-GOLD
B-GREEN
B-GREEN-R
B-GREY-ADG
B-GREY-MIA16
B-GREY-MIA20
B-MRA-L
B-MRA-M
B-MRA-S
2: 24
2: 24
2: 25
2: 12
2: 13
2: 14
2: 15
2: 31
2: 40
2: 41
2: 54
2: 2
2: 53
2: 52
2: 53
2: 53
2: 54
2: 54
2: 53
2: 54
2: 52
1: 3, 6
1: 11
1: 11
1: 11
1: 11
1: 11
1: 11
1: 11
1: 11
1: 3
1: 3
1: 3
1: 3
1: 3
1: 3
1: 3
1: 3
1: 3
1: 3
1: 3
1: 3
1: 16
1: 15
1: 3
1: 27
1: 27
1: 18
1: 18
1: 18
1: 18
1: 17
1: 17
1: 18
1: 18
1: 18
Numerical
Index
01.001.501
01.001.594
01.001.595
01.001.580, .581
01.550.001
03.000.000S–.068S
03.000.070S–.093S
03.000.094S–.111S
03.000.112S–.114S
03.000.115S–.141S
03.000.142S–.159S
03.000.160S–.162S
03.000.170S–.188S
03.000.189S–.197S
03.000.200S–.218S
03.000.219S–.227S
03.000.230S–.235S
03.000.236S–.241S
03.000.245S–.247S
03.000.248S–.250S
03.000.300S–.339S
03.000.340S–.343S
03.000.360S–.365S
03.000.390–.396
03.010.100–.102
05.001.000–.017
05.001.020, .021
05.001.022
05.001.025
05.001.026
05.001.027–.037
05.001.038–.055
05.001.060, .061
05.001.063
05.001.064
05.001.065–.071
05.001.074, .075
05.001.080–.091
05.001.094–.099
05.001.095
05.001.100–.102
05.001.103
05.001.104, .105
05.001.108
05.001.110
05.001.111
05.001.120
05.001.121
05.001.122
05.001.123
05.001.140
05.001.177
05.001.183
05.001.185
05.001.201–.206
05.001.204
N-2
Numerical
Index
Numerical Index
B-OIL
B-ORANGE-45
B-ORANGE-90
B-QD11
B-QD11-S
B-QD14
B-QD14-S
B-QD8
B-QD8-S
B-RED
B-SAGITTAL
B-SILVER
B-TURQ-CDA
B-TURQ-L
B-TURQUOISE
B-TURQ-X
B-VIOLET
BLA-1
BLA-10
BLA-11
BLA-14
BLA-15
BLA-2
BLA-24
BLA-3
BLA-32
BLA-38
BLA-4
BLA-5
BLA-51
BLA-6
BLA-7
BLA-7-9
BLA-8
BLA-9
BLACKMAX-N
BLACKMAX-N-LP
BLU-1
BLU-10
BLU-11
BLU-14
BLU-17-1
BLU-17-2
BLU-17-3
BLU-17-4
BLU-17-5
BLU-17-6
BLU-24
BLU-27
BLU-2S-25
BLU-2XL
BLU-3
BLU-32
BLU-38
BLU-39
BLU-4
1: 3
1: 18
1: 18
1: 22
1: 22
1: 22
1: 22
1: 21
1: 21
1: 17
1: 25
1: 14
1: 18
1: 16
1: 14
1: 18
1: 15
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 2
1: 2
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
BLU-40-55
BLU-47
BLU-5
BLU-51
BLU-6
BLU-7
BLU-7-9
BLU-8
BLU-8-18
BLU-8D-32
BLU-8D-32C
BLU-8-M
BLU-9
BLU-9-5
BLU-9-68
BLU-9DCX
BLU-CS5
BLU-CS6
BLU-CS7
BLU-LS9-35
BLU-LS9-5
BLU-LS9-5E
BM-COUPLER
BM-DRIVER
CDA
CDA-1R
COUPLER
CPERF-14-11-3F
CRANI-A
CRANI-A-R
CRANI-L
CRANI-P
CSR60
CSR60BM
CSRSC
CSRSC-BM
DRIVER
E12
E12-HC
E-FP
E-FP-DIR/IRR
EMAX2-HC
EMAX2PLUS
EMAX2-TRAY
FILTER-II
GOL-2
GOL-2S
GRE-1
GRE-1-M
GRE-1S
GREY-471-25
GREY-471-50
GREY-471-70
GREY-472-00
GREY-MIA16-17-2
GREY-MIA16-17-3
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 28
1: 24
1: 11
1: 11
1: 28
1: 27
1: 11
1: 11
1: 11
1: 11
1: 27
1: 27
1: 27
1: 27
1: 24
1: 7
1: 7
1: 6, 7
1: 6
1: 6
1: 6
1: 6
1: 3
1: 18
1: 18
1: 18
1: 18
1: 18
1: 18
1: 18
1: 18
1: 18
1: 17
1: 17
GREY-MIA16-17-4C
GREY-MIA16-3
GREY-MIA16-4
GREY-MIA16-8
GREY-MIA20-17-2C
GREY-MIA20-17-3
GREY-MIA20-17-3C
GREY-MIA20-17-4
GREY-MIA20-17-4C
GREY-MIA20-17-75C
GREY-MIA20-3
GREY-MIA20-4
GREY-MIA20-7
GREY-MIA20-7-9
GREY-MIA20-8
HOSE
HOSE-01
HOSE-10
HOSE-10-DISS
HOSE-15-DISS
HOSE-20-DISS
HOSE-5
HOSE5-DISS
HOSEDISS
IMRI-A-CRN
IMRI-CRANI-A
IMRI-FOOT-CTRL
IMRI-MOTOR
IMRI-OIL
IMRI-S-1004TD
IMRI-S-1R
IMRI-S-4B
IMRI-S-8NS-M
IMRI-SHD-6B
IMRI-SHORT
IMRI-SHORT-HD
IRR-CLIP-10
IRR-CLIP-20
IRR-CLIP-30
IRR-CLIP-40
IRR-CLIP-50
IRR-CLIP-60
IRRIGATE-TUBE
IRRIGATE-TUBE-HF
IRR-PUMP-II
L-1R
L-1SB
L-1SD
L-10DRC
L-2SB
L-2SD
L-3SB
L-3SD
L-3SDC
L-35DR
L-4B
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 3
1: 3
1: 3
1: 3
1: 3
1: 3
1: 3
1: 3
1: 3
1: 5
1: 5
1: 5
1: 5
1: 5
1: 5
1: 5
1: 5
1: 5
1: 5
1: 5
1: 5
1: 4
1: 4
1: 4
1: 4
1: 4
1: 4
1: 4
1: 4
1: 4
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
11/11
N-3
Numerical Index
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 11
1: 11
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
11/11
LHD-95DRM
LHD-LS9-35
LHD-LS9-5
LHD-LS9-76
LONG
LONG-HD
LONG-S
LS-3405
LS-3406
LS-3407
LS-3408
LS-3409
LS-3410
LS-3411
LS-3412
LS-3413
M-05D
M-05SD
M-1B
M-1D
M-1DC
M-1R
M-1SB
M-1SD
M-1SDC
M-15D
M-15SD
M-15SDC
M-2B
M-2D
M-2DC
M-2SB
M-2SD
M-2SDC
M-25SD
M-3B
M-3D
M-3DC
M-3DC-2
M-3SB
M-3SB-2
M-3SD
M-3SDC
M-35SD
M-35SDC
M-4B
M-4D
M-4DC
M-4DX
M-4FD
M-4OV
M-5AC
M-5B
M-5B-2
M-5BA-20
M-5B-C
1: 13
1: 13
1: 13
1: 13
1: 10
1: 13
1: 10
1: 25, 26
1: 25, 26
1: 25, 26
1: 25, 26
1: 25, 26
1: 25, 26
1: 25, 26
1: 25, 26
1: 25, 26
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
M-5D
M-5DC
M-5OV
M-55OV-C
M-56OV
M-58OV
M-6B
M-6B-C
M-6D
M-6DC
M-6DC-2
M-6DX
M-6DX-20
M-6P
M-7AC
M-7B
M-8N
M-8ND
M-8NS
M-8NSD
M-8NS-M
M-8NS-M-C
MA10-08SD
MA10-15SB
MA10-1SB
MA10-25SB
MA10-2SB
MA10-2SD
MA10-3SB
MA10-3SD
MA10-4D
MA10-8N
MA10-8N-18
MA10-8NS
MA10-8NSDC
MA-10C
MA-10S
MA15-15SD
MA15-2SB
MA15-2SD
MA15-3SB
MA15-3SD
MA15-4D
MA15-4DC
MA15-8N
MA15-8N-18
MA15-8NS
MA15-8NSDC
MA-15C
MA-15S
MA-15ST
MA19-15SD
MA19-2SB
MA19-2SD
MA19-3SB
MA19-3SD
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 9
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
Numerical
Index
L-4BA-S
L-4B-C
L-4D
L-4DC
L-4DRM
L-4DX
L-4OV
L-5AC
L-5B
L-5BA
L-5B-C
L-5D
L-5DC
L-5DRC
L-5DRM
L-5DX
L-5OV
L-56OV
L-58OV
L-6B
L-6D
L-6DC
L-6DRC
L-6DX
L-68DRMDX
L-7AC
L-7B
L-7DRC
L-7DRC-11
L-8DRC
L-8DRC-11
L-8DX
L-8N
L-8ND
L-8NS
L-8NSD
L-8NSDC
L-8NS-M
L-8NS-M-C
L-9B
L-9DRC
L-CRN
L-CRN-S
LHD-3SB
LHD-4B
LHD-47-5
LHD-5B
LHD-5DRM
LHD-5DRM-12
LHD-5DRM-L
LHD-64DRM
LHD-6AC
LHD-6B
LHD-7B
LHD-8NS
LHD-8NS-M
N-4
Numerical
Index
Numerical Index
MA19-4D
MA19-8N
MA19-8N-18
MA19-8NS
MA19-8NSDC
MA-19ST
MA-D20
MA-D20BM
MA-DRIVER
MCA
MCA5-05SD
MCA5-06SD
MCA5-07SD
MCA5-08SD
MCA5-15SB
MCA5-15SD
MCA5-1SB
MCA5-1SD
MCA5-2SB
MCA5-2SD
MCA7-05SD
MCA7-06SD
MCA7-07SD
MCA7-08SD
MCA7-15SB
MCA7-15SD
MCA7-1SB
MCA7-1SD
MCA7-2SB
MCA7-2SD
MEDIUM
MEDIUM-HD
MHD-126B-3F
MHD-15C
MHD-16CT
MHD-17DD
MHD-19CT
MHD-25DD
MHD-25R
MHD-3DRMC
MHD-62DRM
MHD-6AC
MHD-6B
MHD-8NS
MHD-8NS-M
MHD-95DRM
MHD-97B
MHD-98B
MIA16
MIA16-3SB
MIA16-4B
MIA16-4D
MIA16-4DC
MIA16-5D
MIA16-5OV
MIA16-6B
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 20
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 19
1: 9
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
1: 10
MIA16-6DC
MIA16-6DX
MIA16-8NS
MM-CASE-TRAY
MM-CTR-RACK
MM-CTR-RACK
MM-SAGITTAL
MO-3001
MO-3002
MO-3003
MO-3005
MO-3006
MO-3105
MO-3225
MO-3515
MOM
MOTOR-CASE
MR-0500
MR-0520
MR-0540
MR-0560
MR-0580
MR-0600
MR-14006
MRA-8L
MRA-8M
MRA-8S
MS-3100C
MS-3101
MS-3101C
MS-3102
MS-3104
MS-3105
MS-3106
MS-3108
MS-3225
MS-3231
MS-3240
MS-3515
OIL-II
ORANGE-45
ORANGE-90
ORNG-1
ORNG-1275
ORNG-33
ORNG-35
ORNG-36
ORNG-37
ORNG-8-18
ORNG-8-18
O-SAW
P-CRN
P-CRN-M
PG
QD11
QD11-1R
1: 10
1: 10
1: 10
1: 3
1: 3
1: 6
1: 25
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 3
1: 3
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 18
1: 18
1: 18
1: 25, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 23, 26
1: 25, 26
1: 25, 26
1: 23, 26
1: 3
1: 11
1: 11
1: 11, 18
1: 11, 18
1: 11, 18
1: 11, 18
1: 11, 18
1: 11, 18
1: 11, 18
1: 18
1: 23
1: 11
1: 11
1: 3
1: 22
1: 22
QD11-1SB
QD11-1SD
QD11-2SB
QD11-2SD
QD11-3BA-A
QD11-3SB
QD11-3SD
QD11-3SDC
QD11-45DRMDX
QD11-4AC
QD11-4B
QD11-4BA-A
QD11-4D
QD11-4DC
QD11-4DRM
QD11-4DX
QD11-4OV
QD11-4OVD
QD11-4OVDC
QD11-5AC
QD11-5B
QD11-5B-A
QD11-5BA-A
QD11-5D
QD11-5DC
QD11-5DRM
QD11-5DX
QD11-5OV
QD11-62DRM
QD11-6AC
QD11-6B
QD11-6BA-A
QD11-6D
QD11-6DC
QD11-6DX
QD11-7B
QD11-7DX
QD11-8N
QD11-8N-18
QD11-8ND
QD11-8NS
QD11-8NSDC
QD11-8NS-M
QD11-S
QD14
QD14-1SD
QD14-2SD
QD14-3SB
QD14-3SD
QD14-47DRM
QD14-4B
QD14-4BA
QD14-4D
QD14-4DC
QD14-4OV
QD14-5B
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
11/11
N-5
Numerical Index
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 22
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
11/11
QD8-7B
QD8-8N
QD8-8N-18
QD8-8ND
QD8-8NS
QD8-S
RED-1
RED-10
RED-11
RED-17-55C
RED-17-75C
RED-2
RED-24
RED-3
RED-32
RED-38
RED-4
RED-5
RED-6
RED-7
RED-7-9
RED-8
RED-9
R-SAW
S-05D
S-06SD
S-08SD
S-1B
S-1B-C
S-1D
S-1DC
S-1R
S-1SB
S-1SB-C
S-1SD
S-1SDC
S-1203TD
S-1254TD
S-12D
S-1504TD
S-1506TD
S-1506TD-M
S-1510TD
S-15B
S-15D
S-15DC
S-15DCT
S-15DRMC
S-15DRMC-L
S-15SB
S-15SD
S-15SDC
S-2004TD
S-2006TD
S-2433TD
S-25B
1: 21
1: 21
1: 21
1: 21
1: 21
1: 21
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 17
1: 23
1: 8
1: 8
1: 8
1: 8
1: 9
1: 8
1: 8
1: 8
1: 8
1: 9
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 9
1: 9
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
S-25D
S-25DC
S-25SB
S-25SD
S-25SDC
S-2B
S-2B-C
S-2D
S-2DC
S-2SB
S-2SB-C
S-2SBT
S-2SD
S-2SD-120
S-2SDC
S-2SDCT
S-3B
S-3B-C
S-3D
S-3DC
S-3SB
S-3SB-C
S-3SBT
S-3SD
S-3SD-100
S-3SDC
S-3SDC-50
S-3SDCT
S-35B
S-35D
S-35DC
S-35SB
S-35SD
S-4B
S-4B-C
S-4BL-C
S-4BT
S-4D
S-4D-100
S-4DC
S-4D-L
S-4DX
S-4OV
S-5AC
S-5B
S-5B-12F
S-5B-C
S-5D
S-5D-100
S-5DC
S-5DC-40
S-5DX
S-68DRMDC
S-68DRMDX
S-6AC
S-6B
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 9
1: 8
1: 8
1: 8
1: 9
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 9
1: 8
1: 8
1: 8
1: 9
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 9
1: 9
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 9
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
Numerical
Index
QD14-5B-A
QD14-5D
QD14-5DC
QD14-6B
QD14-6D
QD14-6DX
QD14-8N
QD14-8N-18
QD14-8ND
QD14-8NS
QD14-S
QD8
QD8-05B
QD8-05SD
QD8-15SB
QD8-15SD
QD8-15SDC
QD8-1R
QD8-1SB
QD8-1SD
QD8-1SDC
QD8-25SB
QD8-25SD
QD8-25SDC
QD8-2SB
QD8-2SD
QD8-2SDC
QD8-35SD
QD8-35SDC
QD8-3SB
QD8-3SD
QD8-3SD-100
QD8-3SDC
QD8-4B
QD8-4D
QD8-4DC
QD8-4DRM
QD8-4DX
QD8-4OV
QD8-4OVD
QD8-5AC
QD8-5B
QD8-5B-2
QD8-5BA
QD8-5D
QD8-5D-2
QD8-5DC
QD8-5DX
QD8-5OV
QD8-62BE
QD8-62DRM
QD8-6AC
QD8-6B
QD8-6D
QD8-6DC
QD8-6DX
N-6
Numerical
Index
Numerical Index
S-6B-C
S-6D
S-6DC
S-6DX
S-6IP
S-6P
S-6PD
S-6R
S-7B
S-7B-C
S-7IP
S-8B
S-8DC
S-8N
S-8N-18
S-8ND
S-8N-L
S-8NS
S-8NSD
S-8NS-M
S-9AC
S-9B
SA-JACOBS
SA-JLATCH
SC2101
SC2102
SCHRADER-F
SHD-1504TD
SHD-17DD
SHD-25DD
SHD-25R
SHD-3-10
SHD-325DS
SHD-4892DS
SHD-5B
SHD-6AC
SHD-6B
SHD-6DX
SHD-6R
SHD-75AC
SHD-75AC-A
SHD-7B
SHD-8NS
SHD-9AC
SHD-DS-A
SHORT
SHORT-HD
SIL-0
SIL-1
SIL-10
SIL-11
SIL-1-3
SIL-14
SIL-14-17
SIL-15
SIL-1510
1: 9
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 9
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 8
1: 24
1: 24
1: 7
1: 6
1: 3
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 12
1: 9
1: 12
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
SIL-16
SIL-16-5
SIL-16XL2
SIL-17-1
SIL-17-1C
SIL-17-2
SIL-17-2C
SIL-17-3
SIL-17-3C
SIL-17-4
SIL-17-4C
SIL-17-4CX
SIL-17-5
SIL-17-5C
SIL-17-5CX
SIL-17-6
SIL-17-6C
SIL-17-6CX
SIL-18
SIL-19
SIL-1S
SIL-2
SIL-20
SIL-21
SIL-22
SIL-23
SIL-24
SIL-2S
SIL-2XL
SIL-3
SIL-3-10
SIL-32
SIL-38
SIL-39
SIL-4
SIL-464-4
SIL-466-6
SIL-47
SIL-5
SIL-6
SIL-7
SIL-7-9
SIL-8
SIL-8-18
SIL-8D-32
SIL-8-M
SIL-9
SIL-DS-A
SS1
SS2
SS2C
S-SAW
TURQ-0-1
TURQ-1
TURQ-1-M
TURQ-17-2
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 28
1: 28
1: 28
1: 23
1: 14
1: 14, 18
1: 18
1: 14
TURQ-17-2C
TURQ-17-3
TURQ-17-4
TURQ-17-4CX
TURQ-17-5
TURQ-17-5C
TURQ-17-5CX
TURQ-17-6
TURQ-17-6CX
TURQ-3
TURQ-4
TURQ-404-4
TURQ-406-6
TURQ-434-4
TURQ-436-6
TURQ-5
TURQ-6
TURQ-7
TURQ-8
TURQ-8-18
TURQ-8-23
TURQ-8D-25
TURQ-8-M
TURQ-L1
TURQ-L17-1
TURQ-L17-1C
TURQ-L17-2
TURQ-L17-2C
TURQ-L17-3
TURQ-L17-3C
TURQ-L17-4
TURQ-L17-4C
TURQ-L17-4CX
TURQ-L17-5
TURQ-L17-5C
TURQ-L17-5CX
TURQ-L17-6
TURQ-L17-6C
TURQ-L17-6CX
TURQ-L17-75C
TURQ-L17-7CX
TURQ-L3
TURQ-L4
TURQ-L40-4
TURQ-L40-5
TURQ-L5
TURQ-L6
TURQ-L8
TURQ-L8-18
TURQ-L8-23
TURQ-L8D-25
TURQ-L8D-32L
TURQ-L8-L
TURQ-L8-M
TURQ-L9-58
TURQ-LS7
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 14
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
1: 16
11/11
N-7
Numerical Index
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 15
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
1: 13
11/11
XLHD-8NS
XLHD-8NS-M
XLHD-95DRM
XLHD-9B
XMAX
XM-CASE
1: 13
1: 13
1: 13
1: 13
1: 2
1: 3
Numerical
Index
VIO-1
VIO-10
VIO-14
VIO-17-1
VIO-17-2
VIO-17-3
VIO-17-3C
VIO-17-4
VIO-17-4C
VIO-17-4CX
VIO-17-5
VIO-17-5C
VIO-17-5CX
VIO-17-6
VIO-17-6C
VIO-17-6CX
VIO-2
VIO-24
VIO-2XL
VIO-3
VIO-32
VIO-38
VIO-39
VIO-4
VIO-40-4
VIO-40-5
VIO-40-55
VIO-5
VIO-6
VIO-7
VIO-7-2
VIO-7-9
VIO-8
VIO-8-18
VIO-87-5
VIO-87-8
VIO-8D-32
VIO-8-M
VIO-9
VIO-9-5
VIO-97B
VIO-97C
VIO-98B
VIO-98C
VIO-99C
XL-HD
XLHD-25R
XLHD-3SB
XLHD-4B
XLHD-51C
XLHD-55DC
XLHD-5B
XLHD-6AC
XLHD-6B
XLHD-75AC
XLHD-7B
A-1
Alphabetical Index
Alphabetical
Index
A
Air hoses
Air Pen Drive sets
Air Pen Drive and accessories
Angle attachments and dissection tools
Anspach standard attachments
and dissection tools
Autoclavable oil
B
Batteries and battery charger
Battery oscillator
Battery Power Line accessories
Battery Power Line sets
Battery reamer/drill
Battery reciprocator
Black Max Pneumatic System
Black Max standard attachments
Bone collector
Broaches
Burrs
Burr attachments
2: 15, 20, 24
2: 5, 35
2: 2, 3
2: 5
1: 21, 22
1: 8-13
2: 36
2: 30, 31
2: 23
2: 24, 25
2: 21, 22
2: 23
2: 23
1: 2
1: 14-18
1: 27
2: 48
2: 44–47, 49, 50
2: 8
C
Chucks
2: 8, 13, 17, 19, 24, 28, 34
Cleaning brushes
2: 33
Compact Air Drive II and accessories
2: 27–29
ComPact Air Drive set
2: 26
Compact SpeedReducer
1: 27
Compartmental Pressure Monitoring System
2: 55
Contra and right angle attachments
1: 11, 18
Couplers
1: 28
Cranial perforator
1: 27
Craniotomes
1: 11, 18
Cutting Tools for Electric Pen Drive
and Air Pen Drive
2: 44–50
D
Drilling attachments
Drill bits
for Radiolucent Drive
Drivers
E
e12 Electric Instrument System and accessories
Electric Pen Drive and accessories
Electric Pen Drive sets
eMax 2 Plus Instrument System and accessories
G
Graphic cases
11/11
2: 8, 18, 25
2: 48, 51
2: 32
1: 24
1: 7
1: 6
2: 6–10
2: 4
1: 6
2: 52–54
H
Heavy duty attachments
1: 12, 13
I
iMRI System and attachments
Irrigation clips
Irrigation nozzles
1: 5
1: 4
2: 9
K
K-Wire attachment
L
Lindemann reamers
1: 28
2: 7
2: 48, 50
M
MA attachments and dissection tools
Micro Curved Attachment (MCA)
Micro Revision Attachments (MRA)
microSaws
Mini Compressed Air Machine accessories
Minimal access attachments
Minimally Invasive Attachments (MIA)
1: 20
1: 19
1: 18
1: 23
2: 51
1: 20
1: 17
N
Nitrogen regulators
2: 36
O
Oscillating bone saw
2: 29
P
Pneumatic High Performance Instrument
System accessories
Powered Irrigation System
1: 2
1: 3
1: 4
Q
Quick couplings
2: 12–14, 17–19, 24, 25, 28, 29
Quick Disconnect (QD) angle attachments
1: 21, 22
R
Radiolucent drive
Rasps
Reaming attachments
Reduction drive units
2: 32
2: 48
2: 19, 25
2: 14, 27, 28
A-2
Alphabetical Index
T
Torque calibration units
Torque limiting attachments
Trauma Recon System set
Trauma Recon System accessories
Alphabetical
Index
S
Sagittal Saws
Anspach
1: 25
Saw attachments
2: 8, 14, 15, 20, 27
Saw Blades
Anspach
1: 26
for Large Reciprocating Saw Attachments
2: 40
for Mini Reciprocating and Oscillating Saws
2: 51
for Oscillating Saws
2: 37–43
for Pen Drive Saws
2: 42, 43
for Small Battery Drive
2: 40–43
parallel
2: 41
Screw attachments
2: 7, 13, 20
Small attachments, Anspach
1: 24
Small Battery Drive and accessories
2: 12–15
Small Battery Drive sets
2: 11
1: 7
Specialty attachments
1: 11, 18
Sternum top
2: 33
Straight attachments
1: 8-10, 14-17
2: 9
2: 20, 29, 33
2: 16
2: 17–20
X
XMax Pneumatic System
1: 2
11/11
© 2011 Synthes, Inc. or its affiliates. All rights reserved.
Synthes (Canada) Ltd.
2566 Meadowpine Boulevard
Mississauga, Ontario L5N 6P9
Telephone: (905) 567-0440
To order: (800) 668-1119
Fax: (905) 567-3185
2012
Synthes Anspach
4500 Riverside Drive
Palm Beach Gardens, FL 33410
Telephone: (561) 627-1080
To order: (800) 327-6887
Fax: (800) 327-6661
E-mail: [email protected]
www.synthes.com
www.anspach.com
Printed in U.S.A. 12/11 20-0070 rev A J10412-A

Catalog – Power Tools 2012

Transcription

Similar documents

illustrated parts manual illustriertes teileverzeichnis bc100 high

national urban upgrading program

Higgins Auction2.indd - Donnelly Auctioneering

EG1™ ELEKTRISCHES HOCHGESCHWINDIG

Special finishes incur 20% up-charge - 6-8 week