WBuyers Guide

Transcription

WBuyers Guide

WESCO delivers
WBuyers Guide
08/09
DATACOMM SOLUTIONS
WESCO delivers
DATACOMM SOLUTIONS
Your Complete Business Partner
Put the WESCO advantage on your team. Gain the edge you need to increase your
success rate and profitability. Count on our outstanding technical support and local
service from 50 branches across Canada.
Source leading brands like Belden, Panduit, Tyco and Fluke. Succeed with creative
supply chain solutions that make it all run smoothly.
Connect with Canada’s most complete Datacomm distribution partner.
For more information about WESCO Distribution, call 1 (866) WESCOCA (937-2622) or visit www.wesco.ca
CONTENTS
Table of Contents
WESCO Datacomm Solutions
WESCO 10 Gigabit UTP
WESCO Power Over Ethernet
Belden
Berk-Tek
Eaton Powerware
Electron Metal
Fluke
Panduit
Superior Essex
Tyco-AMP Netconnect
Transition
Wirewerks
3M
WESCO Solutions
Credit Application
Branch Directory
4
6
8
12
79
87
97
103
110
119
130
142
145
154
158
161
163
-
5
7
11
78
86
96
102
109
118
129
141
144
153
157
160
WESCO delivers
DATACOMM SOLUTIONS
Service and Support
WESCO provides outstanding technical support for Canada’s leading structured cabling brands. Put
the WESCO advantage on your team to increase your success rate and profitability.
Specification Support
Design Assistance
Project Costing
System Assessments
System Planning Support
Local Product Availability
Product Training
Project Administration
Supply Chain Optimization
On-Line Catalogue
On-Line Order Service
Distribution Without Boundries
At WESCO, distribution is more than servicing your request. We help you meet your
growth and productivity goals through creative logistics solutions. Challenge us with your
supply chain headaches and we will rise to the occasion. WESCO delivers:
A wide assortment of programs from VMI to pre-assembly.
A proven national account service process that helps Canada’s leading companies reduce mro procurement costs.
Over 330 North American branches linked into one computer system.
A complete suite of e-commerce tools to establish a seamless supply chain relationship.
A nearby branch with the can-do attitude to meet your specific requirements.
End to End Networking Solutions
WESCO provides you with everything you need to design,
install, and maintain your data communications networks.
Premise Wiring Cable
Connectors, Outlets, Patch Panels, and Cross Connects
Cabinets and Racks
Electronic Cable
Fiber Connectors, Cable, and Distribution Enclosures
Network Electronics
Why
WESCO?
Shorten design and specification time on your projects.
Make well informed specification decisions that recognize
local product availability
and installer support.
Experience fewer hold ups
and installer questions on
projects.
Installation Tools
Receive consistent and competitive pricing.
Test Equipment
Ensure reliable product supply and local availability.
UPS / Power Systems
Raceway & Conduit
Service your orders on-line
through wescodirect.ca.
I.D. Products
Get your answers right away.
WESCO Tech Support
10GB Networks
Campus Backbones
UPS’s, Power Reliability
Industrial Ethernet
Data Centres
Wireless
WESCO delivers
TECHNOLOGY OVERVIEW
10 GIGABIT UTP
THE ROAD TO 10G
1979:
1983:
First Ethernet defined to run 10 Mb/s
over coaxial cable
IEEE 802.3 – the first Ethernet standard
(10Base5)
1984:
DATACOMM SOLUTIONS
10G
10G Unshielded Twisted Pair Channel
SPACING
By increasing the distance between cable cores, improving balance, and introducing
noise barriers in the patch panels and/or jacks, alien crosstalk can be reduced.
AUGMENTED CATEGORY
IBM introduced Token Ring, able to
transmit data at 4 Mb/s, over two--pair
shielded cable
1985:
IEEE 802.3a released. Known as 'Thin
Ethernet' or 10Base2, (the “2” suggests 200m)
1985:
IEEE 802.3b Ethernet standard
10Broad36,10 Mb/s using broadband
1990:
IEEE 802.31, Ethernet standard for
10Base-T (“T” for twisted pair), 10 Mb/s
(Category 3)
1991:
Electronics Industry Association (EIA)
together with the Telecommunications
Industry Association (TIA) published the
first telecommunications cabling
standard,EIA/TIA 568 and structured
cabling systems were born. Based on
Category 3 UTP, it was closely followed one
month later by a Technical Systems
Bulletin (TSB-36) which specified higher
grades of UTP cable, Category 4 and 5.
1995:
IEEE 802.3u Fast Ethernet standards
100Base-TX (2-pair Category 5), 100 Base
T4 (4-pair Category 3),100Mb/s, TIA-568A
(Category 5), 100 MHz
1997:
IEEE 802.3x Full duplex Ethernet standard;
IEEE 802.3y, 100BaseT2 Fast Ethernet
standard (2-pair Category 3)
1999:
1000Base-T,1 Gb/s, TIA 568-A-5
(Category 5e)
2002:
1000Base-TX,1 Gb/s, (Category 6),100 m
2004:
10GBase-T, First draft to include Category 6
at a limited distance (55m), Class F
(Category 7) or Augmented Category 6 to
100m
2006:
10GBase-T (Draft 3.1), 10 Gb/s
(Augmented Category 6), 2.5 Gb/s
transmission, BER 10-12, PAM16,
Same MAC interface to be backwards
compatible
PATCH PANELS
Include spacing or other
alien crosstalk barriers
between jacks
6 CABLE
• Augmented Category 6 UTP
Cable is characterized to
500 MHz
• Additional spacing in
Augmented Category 6 cables
reduces alien crosstalk
• CMR and CMP Diameter: 0.35
• Minimum bend radius is 1.4"
LARGE CAPACITY RACEWAY
WORKSTATION OUTLETS
Minimum two gang box to allow for cable
thickness and proper bend radius
WORKSTATION JACK MODULES
• Barriers and tactical isolation of circuit
paths (spacing within product) minimizes
effects of alien crosstalk
• Termination procedures are consistent
with
Offers greater bend radius control
for the larger diameter cables.
Dual troughs separate electrical
and communications cables.
Category 6 and Category 5e requirements
PATCH CORDS
• Augmented Category 6 patch cords should
be used to ensure system performance
• Noise barriers improve plug resistance to
alien noise
• Stranded patch cords offer flexibility and
improved cable management
CONDUIT FILL
1" conduit—allow room for thicker
Augmented Category 6 cable in
the conduit not to exceed the 40%
fill factor
• Core spacing and balance protect against
alien crosstalk with the cordage
CURRENT STANDARDS
TIA/EIA-568-B.2-10: Transmission performance for 4-pair 100 Ohm Augmented
Category 6 cabling specified to 500 MHz. Specifies cabling system (cables and
connecting hardware)
IEEE 802.3an, 10GBase-T Link Segment: Augmented Category 6 specified to 500
MHz. Specifies channel parameters. Also specifies Category 6 FTP and Category 7
(Class F)
TIA/EIA-TSB-155: Existing Category 6 characterized to 500 MHz. Specifies channel
and permanent link. Limited distance (<100m) support for 10GBase-T
WHY 10G?
10G Channel Considerations
•
ALIEN CROSSTALK
30 GB file (such as an MRI) can be
transmitted in 24 seconds
Identified as the dominant noise source that will affect 10GBase-T
•
performance, the coupling interference that comes from nearby
cables or other electrical cables can be reduced in one of two ways,
spacing or shielding.
A memory device, such as a large storage
tape drive, with 2 Terabyte capacity can be
loaded within 27 minutes
•
Over 156,000 ISDN-telephone calls can be
transmitted over just one connection at
individual speeds of 64 Kps.
10G Foil Twisted Pair Channel
SHIELDING
MARKET DEMAND FOR 10GbE
The introduction of a foil shield between cable cores can also block alien crosstalk.
INDEPENDENT
GROUNDING SYSTEM
Per TIA/EIA-607-A, the FTP
cabling system must be
properly grounded. This can
easily be accomplished by
bonding the FTP patch panel
to the 607-A required
grounding busbar.
CATEGORY 6 FTP CABLE
• Metallic shielding eliminates
alien crosstalk, resulting in a
higher signal-to-noise ratio
PATCH PANELS
Individually shielded panel
ports provide maximum
protection from alien
crosstalk
• Shielding also protects
against other external noise
sources
• CMR Diameter: 0.265
• CMP Diameter: 0.29
NO W: 16%
Next 5 years: 45%
5-10 years: 19%
No Response: 12%
More than 10 years: 5%
Never: 3%
(Per BICSI Standards Committee Survey,
10GBase-T Gigabit Ethernet Over Twisted Pair
Cabling, October/November 2005)
APPLICATIONS
• Data Centers (SAN, MAN, LAN, Server
Farms)
• Health Care (High Resolution Imaging)
• Enterprise (Computer Room, Equipment
Room, Horizontal Distribution)
• Research Facilities
• Backbone Technologies
WORKSTATION OUTLETS/JACKS MODULES AND CORDS
• Shielded Category 6 connectors provide maximum protection from alien
crosstalk
• Jacks and cords must be designed to support transfer impedance requirements
This section used with permission from CSC
(Communication Supply Company). CSC wishes to thank
Berk-Tek® and Ortronics/Legrand® for this 10 Gigabit UTP
Technology Overview.
This information about 10G UTP is accurate as of March, 2006.
WESCO delivers
TECHNOLOGY OVERVIEW
DATACOMM SOLUTIONS
POWER OVER ETHERNET (PoE)
INTRODUCTION
PoE
Benefits of PoE
Power over Ethernet (PoE) is a revolutionary
technology that extends the already ultra-broad
Lower Cost—PoE eliminates the need for running both data and power wires to each
network device. WAPs and security cameras can be installed without the additional
functionality of Ethernet by supplying reliable DC
expense of contracting an electrician to install AC outlets where deployed. PoE also
power over the same high-speed unshielded
helps protect IT investments as it is forward and backward compatible with other
twisted-pair cable that currently carries Ethernet
Ethernet protocols. Furthermore, PoE devices that are Simple Network Management
data. PoE, modeled after the technology used by
Protocol (SNMP) manageable can be remotely monitored and controlled to efficiently
the telecommunications industry to supply
manage or troubleshoot power consumption and/or failures.
reliable power to telephones, enables lifeline
quality power for IP telephones (VoIP) as well as
many other low power Ethernet network devices
like wireless access points (WAP) and security
cameras as shown in Figure 1.
More Flexible—Network devices can be installed and re-located where performance
is optimum and not tethered to an existing AC outlet. This is especially important for
devices like WAPs, which may be installed in hard to reach places like the ceiling in
order to achieve the broadest coverage.
Figure 1.
More Reliable—An
Typical PoE installation utilizing
centralized power source enhances the
a powered patch panel
protection against power overloads, outages,
midspan PSE to support
surges
common low power Ethernet
implemented, along with uninterruptible
devices. Network equipment
power supplies (UPSs) or battery backups, it
investments are expected to
allows enterprises to distribute power even
provide functionality that
when the AC electrical power is down. This
support current and future
enables
productivity enhancements.
telephones with feature rich VoIP phones
Deploying a PoE network today
while retaining the lifeline reliability benefits.
and
SNMP
spikes.
them
to
manageable
When
replace
PoE
is
conventional
offers the following advantages
that will also support
tomorrow’s innovations.
PoE, or IEEE standard reference 802.3af, began
the standardization process in 1999 to address
the need to ensure interoperability among a
How PoE Works
growing number of proprietary methods of
There are two basic components in a IEEE 802.3af compliant PoE network: a device
distributing DC power to network devices. Now
that supplies power, known as the Power Sourcing Equipment (PSE) and a device
that
the
that receives and utilizes the power, known as the Powered Device (PD). Upon
ubiquitous Ethernet RJ-45 plug and outlet make
connection of any network device to a PSE, the PSE must first determine or
up
power
“discover” if the device is a PD or not. This ensures that existing Ethernet equipment,
equipment
that may not be PoE compliant, is not forwarded power and possibly damaged. The
vendors are designing standards-based products
PSE does this by applying two small current-limited voltage signals across the cable
that leverage the numerous advantages offered
and checks for the presence of a characteristic resistance; power is provided only if
by PoE. These products include security access
this specified resistance is detected. As an optional extension to the discovery
systems, battery chargers, vending and gaming
process, a PD may also classify how much power it will require from the PSE. This
machines, electric guitars and even electronic
feature supports the PSE by helping it supply power in an efficient way.
the
the
standard
first
connectors.
has
been
universal
Consequently,
passed,
worldwide
PoE
shavers. Constantly emerging applications using
PoE are limited only by the ingenuity of the
product designers.
After the PSE has discovered a PD, it will supply 48 V and a maximum current of 350
mA. Accounting for the voltage drop due to the cable losses, a minimum of about 13
W is available to the PD. This is enough power for numerous applications including
VoIP telephones, WAPs, security cameras and building access systems.
Once the PSE begins to provide power, it continuously monitors
A midspan PSE fits in between the switch and the PD. It supplies power
the PD current draw. Once the PD current consumption drops
over the unused cable pin-pairs 4 and 5 and pin-pairs 7 and 8; data is
below a minimum value, for example when the device is
routed through the midspan device without modification as shown in
unplugged, the PSE discontinues supplying power and the
Figure 2. These devices are usually mounted adjacent to the Ethernet
discovery process begins again.
switch in an equipment rack. It is important to note that although the PSE
The standard defines two different types of PSEs: endspan and
midspan. An endspan PSE integrates the power sourcing
functionality with a network switch. Endspans available today
must use the pin-pairs assigned to an endspan or midspan, not both, the
PD must have the capability to accept power from both an endspan or a
midspan.
look and function exactly the same as any other Ethernet switch,
Midspan devices offer the advantage of retaining the current investment
except they can provide PoE in addition to routing data. Since
in a switch that does not support PoE. Furthermore, since midspans are
Ethernet data pairs use transformers coupled at each end of the
less expensive than endspans, midspans are the more cost-effective
link, DC power can easily be added to the center tap of the
way of adding PoE on a port by port basis to an existing network. A
transformer without disrupting the data. In this mode of
single midspan may be used to support multiple switches with
operation, an endspan injects both power and data on pin-pairs 3
connections to PDs that require PoE.
and 6 and pin-pairs 1 and 2.
Currently, there are two different types of midspan devices: a power hub
and a powered patch panel. A power hub has two RJ-45 outlets for each
PoE port, an input and output, both of which are located on the front. A
patch cord connects the switch port to the input of the hub and an
additional patch cord connects the matching hub output to a patch panel
and subsequently the PD. The other type of midspan, a powered patch
panel, combines the functionality of a midspan device with a conventional
patch panel. By using a powered patch panel midspan, the switch
connects directly to the PD through the panel.
A RJ-45 patch cord connects the switch to the front of the patch panel
while the PD is connected to the back of the panel on the matching
punchdown terminal. Power is added to the unused data pin-pairs within
Figure 2.
the patch panel. Using this simplified approach requires fewer ports,
A midspan PSE supplies power on the unused wire pairs and is
fewer patch cords and less rack space compared to power hub midspans
typically a stand-alone device.
as shown in Figure 3.
This section used with permission from CSC (Communication Supply Company).
CSC wishes to thank Panduit™ for this Power over Ethernet Technology
Overview. Please refer to Section 10 of this catalog for PoE solutions.
Figure 3. Comparison of implementation configurations for the
two types of midspan PSEs: powered patch panel (left) verses
power hub.
WESCO delivers
DATACOMM SOLUTIONS
Industrial Ethernet Solutions
10
WESCO’s Industrial Ethernet specialists provide expert
technical assistance from preliminary design to operation.
You can rely on WESCO for a wide product offering, local
availability, and unbiased product advice.
Performance Issues
Effectively integrating Industrial Ethernet into an existing or new manufacturing or processing
facility can be challenging. Along with environmental protection there should be consideration of
interoperability, deployment, security, reliability, electrical performance, and cost. These challenges
are accommodated when Industrial Ethernet components are tuned and integrated with one another
as a complete solution.
The Panduit IndustrialNet Ethernet Solution is a family of reliable, high - performance, Ingress
Protected (IP) products for industrial networking applications. This includes hardened network
connectivity products and enclosures specifically designed to withstand the harsh conditions
encountered in industrial automation applications.
Powerware UPS’s can protect your industrial systems against a full range of power problems, even
under the most strenuous of circumstances. Powerware provides: UPSs specifically designed for
the rigorous demands of the industrial environment. Award-winning power management software
solutions proactively monitor and manage your crucial systems. World-class service offerings deliver
the peace of mind that your industrial systems are always protected.
11
Fluke Networks is the world’s leading provider of innovative solutions for the testing, monitoring
and analysis of enterprise networks. Choose the right tool from Fluke Networks: to qualify your
copper and fiber installations, to ensure moves adds and changes are done right the first time, to
troubleshoot your network quickly, and to document your network.
WESCO Industrial Ethernet Solutions
Rated for factory environments
Fully integrated solution
Reduced total cost of ownership (TOC)
Trained local specialists
WESCO delivers
Belden and WESCO Now offering you more
networking solutions
than ever before
Structured cabling and
connectivity solutions,
active solutions and
now...
12
CABLE MANAGEMENT
Cable Management Solutions from Belden
The same quality and reliability you have appreciated with Belden’s Structured Cabling
Systems can now be experienced with their Cable Management Solutions. You can rely
on Belden for the housing and storage of data equipment, protection of sensitive servers,
optimal cable routing, and simplified cable installations.
Contact WESCO’s Datacomm specialists for information and application support on
Belden’s Cable Management products.
Copper Media
Belden IBDN System 10GX -10GX Cables
24826395 10GX Cable Series, White
10GX Cable
The 10GX Cables are 4-pair 23 AWG UTP cables designed to be used within the
Belden IBDN System 10GX. The GX Cable incorporates the use of patent-pending
SpiralFleX™ technology, which improves the ANEXT coupling by increasing and
randomizing the distance between a cable and the neighboring cables surrounding
it. The unmatched Beyond 10G™ performance exceeds all parameters specified
in the proposed Augmented Category 6 standard. All performance characteristics
including ANEXT, NEXT, FEXT, Insertion Loss and Return Loss have been set to
guarantee channel transmission performance up to 625 MHz. The 10GX Cable
Series is very complete with cable available with Bonded-Pairs and Nonbondedpairs, and is available in plenum, non-plenum, and Limited Combustible versions.
WESCO#
Mfg. #
Description
62857520252
24816395
10GX12 Cable, 4-Pair Cat6A, 23 AWG UTP nonbonded, CMR, 305m (1000ft) Spool, White
62857520253
24816995
10GX12 Cable, 4-Pair Cat6A, 23 AWG UTP nonbonded, CMR, 305m (1000ft) Spool, Blue
62857520243
24817395
10GX13 Cable, 4-Pair Cat6A, 23 AWG UTP nonbonded, CMP, 305m (1000ft) Spool, White
62857520244
24817995
10GX13 Cable, 4-Pair Cat6A, 23 AWG UTP nonbonded, CMP, 305m (1000ft) Spool, Blue
62857520250
24826395
10GX32 Cable, 4-Pair Cat6A, 23 AWG UTP bonded, CMR, 305m (1000ft) Spool, White
62857520251
24826995
10GX32 Cable, 4-Pair Cat6A, 23 AWG UTP bonded, CMR, 305m (1000ft) Spool, Blue
62857520241
24827395
10GX33 Cable, 4-Pair Cat6A, 23 AWG UTP bonded, CMP, 305m (1000ft) Spool, White
62857520242
24827995
10GX33 Cable, 4-Pair Cat6A, 23 AWG UTP bonded, CMP, 305m (1000ft) Spool, Blue
13
IBDN GigaFlex 4800LX Cable Series, Beyond Category 6
Features
Rip Cord
•Cross web design separates pairs and maintains stable pair position,
thus improving NEXT and impedance performance
•Stable pair position provides built-in resilience to installation
•Improved attenuation ensures stronger signal power
•Maximized bandwidth and signal-to-noise margin for mission-critical applications
•Descending distance marking for cable length reduces waste
•Matching tip and ring colour code for ease of installation.
Description
WESCO#
Mfg. #
IBDN GigaFlex 4812LX Cable, 4-pair, 23 AWG, CMR, Cat 6
White, 305 m (1000 ft.) 36 spools/pallet 62857501538 24586385
Blue, 305 m (1000 ft.) 36 spools/pallet 62857501553 24586985
Description
WESCO #
Mfg. #
IBDN GigaFlex 4813LX Cable, 4-pair, 23 AWG, CMP, Cat 6
The IBDN GigaFlex 4800LX cables are available in a standard wooden
spool. Alternative colours and packaging are also available, subject to
Minimum Order Quantities.
Copper Media
IBDN GigaFlex 2400 Cable Series, Category 6
Features
Rip Cord
• Increased bandwidth and signal-to-noise margin
•Optimized balance of transmission performance for simultaneous parallel
transmission protocols
•Size minimized for compactness of installations
•Materials selected to support 25 year performance warranties
•Descending distance marking for cable length reduces waste
•Matching tip and ring colour code for ease of installation
•Available in Spool-in-Box (SIB) packaging for ease of installation, handling
and inventory management for some cable.
Description
WESCO # Mfg. #
IBDN GigaFlex 2412 Cable, 4-Pair, 24 AWG, CMR, Cat 6
White, 305 m (1000 ft.) 45 SIB/pallet
62857500459 24566315
Yellow, 305 m (1000 ft.) 45 SIB/pallet
62857510797 24566715
Blue, 305 m (1000 ft.) 45 SIB/pallet
62857500486 24566915
Yellow, 305 m (1000 ft.) 36 spools/pallet 62857500473 24566745
Blue, 762 m (2500 ft.) 14N, 27 spools/pallet62857500489 24566936
Description
WESCO # Mfg. #
IBDN GigaFlex 2413 Cable, 4-Pair, 24 AWG, CMP, Cat 6
White, 305 m (1000 ft.) 45 SIB/pallet
62857500497 24567315
Yellow, 305 m (1000 ft.) 45 SIB/pallet
62857510798 24567715
Blue, 305 m (1000 ft.) 45 SIB/pallet
62857500515 24567915
Blue, 762 m (2500 ft.) 27 spools/pallet
62857500517 24567936
SIB = Spool-in-Box
14
IBDN GigaFlex 1200 Cable Series, Category 5e
Features
Rip Cord
•
•
•
•
•
•
inimized skew for parallel transmission protocols
M
High flexibility design eases cable installation and dressing
Size minimized for compactness of installations
Materials selected to support 25 year performance warranties
Descending distance marking for cable length reduces waste
Matching tip and ring colour code for ease of installation.
Description
WESCO # Mfg. #
IBDN GigaFlex 1212 Cable, 4-pair, 24 AWG, CMR, Cat 5e
Blue, 305 m (1000 ft.) 45 boxes/pallet 62857500634 24570161
White, 305 m (1000 ft.) 45 boxes/pallet 62857500639 24570166
Yellow, 305 m (1000 ft.) 45 boxes/pallet 62857500834 24570464
Description
WESCO # Mfg. #
IBDN GigaFlex 1213 Cable, 4-pair, 24 AWG, CMP, Cat 5e
Blue, 305 m (1000 ft.) 45 boxes/pallet 62857501042 24570800
White, 305 m (1000 ft.) 45 boxes/pallet 62857501050 24570810
Yellow, 305 m (1000 ft.) 45 boxes/pallet 62857501071 24570835
Copper Media
IBDN Plus 25-Pair Cat5E UTP Cable
TIA/EIA-568-B.2, Category 5E
Enhanced Category 5 Nonbonded-pair Cables
IBDN Plus 25-pair Cable series are Category 5 backbone cables designed
for high-speed applications. These cables meet and exceed the Category 5
transmission characteristics including the Power Sum Near End Crosstalk (NEXT)
requirements of ANSI/TIA/EIA-568-A (CSA T529-95) Standard for Commercial
Building Telecommunications Wiring.
Rip Cord
WESCO#
Mfg.#
Description
62857510667
24576125
IBDN Plus Riser Cat5E, 25-pair, 24 AWG, CMR, Gray, 305 m (1000 ft)
62857510669
24577125
IBDN Plus Plenum Cat5E, 25-pair, 24 AWG, CMP, Gray, 305 m (1000ft)
Data Grade Armored Riser 25-Pair UTP Cable
TIA/EIA-568-A, Category 5
Category 5 Nonbonded-pair Cables
Data Grade Riser 25-pair is a Category 5, multi-pair, backbone cable designed
for high-speed applications. This cable meets and exceeds the Category 5
transmission characteristics including the PowerSum Near End Crosstalk (NEXT)
requirements from ANSI/TIA/EIA-568-A (CSA T529-95) Standard for Commercial
Building Telecommunications Wiring.
Riser Cable ARMM/ATMM is a rugged Multi-pair cable series that meets and
exceeds ANSI/TIA/EIA-568-A and CSA T529-95 specifications for Category 3
transmission characteristics.
Description
Data Grade Riser - Armored: CMR, Cat 5, 25-pair
Grey, 2500 m (8200 ft.), 60W Reel
Grey, Cut Length (m / ft.), 42W-60W Reel
Riser Cable - Armored: 24 AWG, UL/CSA, CMR, Grey
ARMM/ATMM-25, 25-pair
WESCO #
Mfg. #
62857501562
62857501563
25500027
25500028
62857500131
62857500132
62857500134
62857500135
62857500136
62857500137
62857500138
62857500139
62857500140
62857500141
62857500142
62857500144
62857500145
62857500146
62857500148
22713010
22713020
22713030
22713035
22713040
22713045
22713050
22713060
22713070
22713080
22713090
22713100
22713110
22713120
22713130
Please call customer service for 24 AWG cable counts above 1200-pair, 22 AWG or 26 AWG cables and for available cable lengths and reel sizes.
15
Copper Media
D-Series Cable, Category 3
D-Series are multi-pair plenum and riser rated backbone cables that meet and
exceed ANSI/TIA/EIA-568-A and CSA T529-95 specifications for Category 3
transmission characteristics.
D-Series multi-pair cable is intended to be used for backbone installations of moderatespeed environments, such as:
• 10 Mb/s Ethernet (IEEE 802.3 10BASE-T)
• 4 Mb/s Token Ring (IEEE 802.5)
• Voice applications.
Rip Cord
Rip Cord
16
WESCO #
Mfg.#
Description
62857500352
24501934
D-Inside Cable, 24 AWG, CMR, Cat3, 3-pair, Olive Gray,
457 m (1500 ft)
62857500358
24501941
305 m (1000 ft)
62857500367
24501950
457 m (1500 ft)
62857500364
24501947
305 m (1000 ft)
62857501176
24571097
D-Flex Cable, 24 AWG, CMP, Cat3, 3-pair, Olive Gray,
457 m (1500 ft)
62857501180
24571111
305 m (1000 ft)
62857501181
24571112
457 m (1500 ft)
62857501179
24571110
305 m (1000 ft)
DataTwist® 5e ScTP Cable
TIA/EIA-568-B.2, Category 5e Nonbonded-Pair Cables
Drain Wire
DataTwist 5e ScTP is a Category 5e Nonbonded-Pair cable that is third party
verified to TIA/EIA-568-B.2. it is 24AWG solid bare copper conductors with the
overall Beldfoil Shield and drain wire. The shield is bonded to the jacket inner
wall for electrical stability.
Mfg.#
Description
1533R
4-pair Non-plenum Polyolefin Insulation PVC jacket
305m (1000ft)
1533P
4-pair Plenum FEP Teflon Insulation Flamarrest
Jacket 305m (1000ft)
Copper Media
Belden IBDN System 10GX
10GX Modules and 10GX Patch Panels
AX102272 10GX Module, Black
10GX Module
The 10GX Module is a revolutionary punch down UTP connector designed to be
used within the new Belden IBDN System 10GX. In order to achieve true 10G
performance, Belden has designed the 10GX Module based on three revolutionary
module technologies making the 10GX Module the most advanced 10G module
available. It is designed to work in existing hardware including the Flex Modular
Patch Panel and MediaFlex Outlet Series. It can also be mixed and matched with a
wide variety of adapters and boxes to suit practically any installation configuration for
workstation outlet, consolidation point and telecommunications closet applications.
The unmatched Beyond 10G™ performance exceeds all parameters specified in the
proposed Augmented Category 6 standard. All performance characteristics including
ANEXT, NEXT, FEXT, Insertion Loss and Return Loss have been set to guarantee
transmission performance up to 625 MHz. .
AX102488 10GX Ultra High-Density
Patch Panel
1U, 48-port, Titanium
AX102293 10GX Patch Panel 1U, 24port, Titanium
WESCO #
Mfg. #
Description
62857520092
AX102269
10GX Augmented CAT6 Module MDVO Style, T568A/B Grey
62857520094
AX102271
10GX Augmented CAT6 Module MDVO Style, T568A/B White
62857520095
AX102272
10GX Augmented CAT6 Module MDVO Style, T568A/B Black
62857520097
AX102274
10GX Augmented CAT6 Module MDVO Style, T568A/B Red
62857520098
AX102275
10GX Augmented CAT6 Module MDVO Style, T568A/B Yellow
62857520099
AX102276
10GX Augmented CAT6 Module MDVO Style, T568A/B Green
62857520100
AX102277
10GX Augmented CAT6 Module MDVO Style, T568A/B Blue
10GX Patch Panel
The 10GX Patch Panel is a fully loaded patch panel designed to be used within
the Belden IBDN System 10GX. The 10GX Patch Panel features the revolutionary
10GX Module, specifically designed to meet the difficult challenges of 10 Gb/s
transmission. 10GX Patch Panels are available in high-density options such as
24 ports in 1U or 48 ports in 2U, but the phenomenal ANEXT performance of the
10GX Module has allowed Belden to also support an ultra high-density option
offering the 10GX Ultra High-Density Patch Panel supporting 48 ports in 1U. The
unmatched Beyond 10G™ performance exceeds all parameters specified in the
proposed Augmented Category 6 standard. All performance characteristics including
ANEXT, NEXT, FEXT, Insertion Loss and Return Loss have been set to guarantee
transmission performance up to 625 MHz.
WESCO #
Mfg. #
Description
62857523148
AX102488
10GX 48-port Ultra High Density Cat6A Patch Panel, 1U
Titanium
62857520203
AX102293
10GX 24-port Cat6A Patch Panel, 1U, Titanium
62857520206
AX102296
10GX 48-port Cat6A Patch Panel, 2U, Titanium
17
Copper Media
Belden IBDN System 10GX
10GX Modular Cords
AX360015 10GX Modular Cord, Blue
10GX Modular Cords
The 10GX Modular Cords are 4-pair 23 AWG UTP modular cords designed to be
used within the Belden IBDN System 10GX. Belden has designed the 10GX Modular
Cord based on a patent-pending management bar design which allows for very good
control of the internal plug NEXT. The patch cable design offers very good Alien
crosstalk performance, while maintaining the important mechanical characteristics
such as flexibility. The 10GX Modular Cords’ design, with a very small footprint,
makes them fully compatible with the highest density hubs that utilize RJ45 jack
connections. The 10GX Modular Cords are available in pantone colors that match
the colors per the TIA/EIA-606 standard and the product line encompasses CMR
modular cords, as well as open-ended cords. The unmatched performance exceeds
all parameters specified in the proposed Augmented Category 6 standard. All
performance characteristics have been set to guarantee transmission performance
up to 625 MHz.
18
WESCO #
Mfg. #
Description
62857520123
62857520124
62857520125
62857520126
AX360015
AX360016
AX360017
AX360018
10GX 4-pair 23AWG Solid Cat6A Modular Cord T568A/B, CMR 7ft, Blue
62857520159
62857520160
62857520161
62857520162
AX360051
AX360052
AX360053
AX360054
10GX 4-pair 23AWG Solid Cat6A Modular Cord T568A/B, CMR 7ft, White
62857520135
62857520136
62857520137
62857520138
AX360027
AX360028
AX360029
AX360030
10GX 4-pair 23AWG Solid Cat6A Modular Cord T568A/B, CMR 7ft, Grey
62857520129
62857520130
62857520131
62857520132
AX360021
AX360022
AX360023
AX360024
10GX 4-pair 23AWG Solid Cat6A Modular Cord T568A/B, CMR 7ft, Green
62857520153
62857520154
62857520155
62857520156
AX360045
AX360046
AX360047
AX360048
10GX 4-pair 23AWG Solid Cat6A Modular Cord T568A/B, CMR 7ft, Red
62857520165
62857520166
62857520167
62857520168
AX360057
AX360058
AX360059
AX360060
10GX 4-pair 23AWG Solid Cat6A Modular Cord T568A/B, CMR 7ft, Yellow
62857520169
62857520170
62857520171
62857520172
AX360265
AX360266
AX360267
AX360268
10GX 4-pair 23AWG Solid Cat6A Pigtail T568A-Open, CMR 15ft, Grey
62857520173
62857520174
62857520175
62857520176
AX360269
AX360270
AX360271
AX360272
10GX 4-pair 23AWG Solid Cat6A Pigtail T568B-Open, CMR 15ft, Grey
Copper Media
GigaBIX Cross-Connect System
GigaBIX Multi System
Termination Kits and Basic Components
GigaBIX Termination Kits
AX101470
GigaBIX
Termination Kit,
72-port
The GigaBIX Termination Kits contains all components required to terminate cables
in a GigaBIX Cross-Connect or Interconnect System. The Termination Kits allow for
the most cost-effective Category 6 cross-connect or interconnect installations using
GigaBIX Cross-Connect Wire or GigaBIX PS6+ Patch Cords. The GigaBIX Mount is
designed to accommodate high-performance cables. The GigaBIX Connectors have
color-coded edges, separation marks and a keying feature that prevents connector
insertion in the wrong orientation. Each kit also contains Wire Guards, Designation
Strips, Designation Labels, Velcro ties and a detailed installation guide.
GigaBIX Connector
AX101447 GigaBIX Connector,
6-port
AX101986 GigaBIX Rack Mount Panel
The GigaBIX Connector is the core component of the GigaBIX Multi System. Its
symmetrical construction allows termination of high-performance cables on one
side and GigaBIX Cross-Connect Wires or GigaBIX Patch Cords on the other. Each
GigaBIX Connector is equipped with 50 double-ended Insulation Displacement
Connection (IDC) clips for terminating plastic insulated solid copper conductors
without stripping. The connector is built with two staggered rows of IDC clips
enclosed in a three-layer construction of fire-retardant plastic wafers. The GigaBIX
Connectors have color-coded edges, separation marks and a keying feature that
prevents connector insertion in the wrong orientation. The GigaBIX Connector offers
exceptional performance that goes Beyond Category 6 which makes it the ideal
choice for gigabit cabling networks.
GigaBIX Mount
The GigaBIX Mount for wall installations holds 12 GigaBIX Connectors and is
designed to accommodate up to 144 high-performance cables when used in a topto-bottom cross-connect layout.
The GigaBIX Rack Mount Panel allows for customizing rack mount installations
for data, voice or multimedia installations. This panel can accommodate up to 8
GigaBIX Connectors, for a total of 48 terminations of 4-pair UTP cables, or up to 4
GigaBIX/MediaFlex Adapters for a total of 48 multimedia ports.
AX101472
GigaBIX Mount
GigaBIX Wire Guard
AX101486 GigaBIX Wire Guard
AX101483 GigaBIX Designation Strip,
shown here with label
AX101987 GigaBIX/MediaFlex Adapter
The GigaBIX Wire Guards are plastic strips that snap behind the GigaBIX
Connectors after termination to provide strain relief to the twisted pairs. They come
as part of the GigaBIX Termination Kits and can also be ordered separately as
replacement components.
GigaBIX Designation Strip
The GigaBIX Designation Strips are plastic strips that snap between the GigaBIX
Connectors to apply the designation labels. They come as part of the GigaBIX
Termination Kits and can also be ordered separately as replacement components.
(See the LabelFlex section for designation labels.)
GigaBIX/MediaFlex Adapter
The GigaBIX/MediaFlex Adapter allows for mixed media installation within the
expanded GigaBIX Multi family of connectivity. The GigaBIX/MediaFlex Adapter can
accommodate a variety of MediaFlex inserts including UTP and multimedia inserts to
customize multimedia installation in Telecommunications Rooms, Equipment Rooms,
or Consolidation Points. .
WESCO#
62857506439
62857506440
62857511999
Order #
AX101470
AX101471
AX101985
Mfg. #
NXXCBTK72
NXXCBTK300
NXXCBRM3U48P
Description
GigaBIX Termination Kit, 72-port
GigaBIX Termination Kit, 300-pair
GigaBIX Rack Mount Termination Kit
62857506416
AX101447
NXXCB6PT
GigaBIX Connector, 6-port
62857506417
62857506441
62857512000
62857506451
62857506448
62857512001
AX101448
AX101472
AX101986
AX101486
AX101483
AX101987
NXXCB25PR
NXXCB12C
NXXCBRM3U
NXXCBWG
NXXCBDS
NXXCBMJAP
GigaBIX Connector, 25-pair
GigaBIX Mount, 12-connector
GigaBIX Rack Mount Panel
GigaBIX Wire Guard
GigaBIX Designation Strip
GigaBIX / MediaFlex Adapter
19
Copper Media
GigaBIX Patch Cords
AX101945 G
igaBIX PS6+ Patch
Cord, BIX-BIX, 4 ft.
GigaBIX Patch Cords
GigaBIX Patch Cords allow for high-density connections, coupled with flexibility
for cost-effective installation and administration. Plug-and-go installation and
rearrangement of patch cords do not require any special tools or training. GigaBIX
Patch Cords are available in two different configurations: BIX-BIX patch cord
configurations for easy cross-connection between equipment and distribution fields,
and BIX-8MOD patch cord configurations to easily interconnect equipment utilizing
8-position modular jacks directly into GigaBIX Connectors in the distribution field.
AX101951 G
igaBIX PS6+ Patch
Cord, BIX-8MOD, 4 ft.
The GigaBIX PS6+ Patch Cords are 4-pair 23 AWG UTP cords. They are used in
GigaBIX Multi System as part of a Belden IBDN System 2400 and System 4800LX,
providing a channel bandwidth of 250 MHz and 300 MHz respectively.
The GigaBIX PS5E Patch Cords are used in the GigaBIX Multi System as part of a
Belden IBDN System 1200, providing outstanding channel bandwidth of 160 MHz..
20
Description WESCO #
Mfg. #
GigaBIX Patch Cord, BIX-BIX
1.2 m (4 ft.) 62857506455 AX101494
1.8 m (6 ft.) 62857506456 AX101495
2.4 m (8 ft.) 62857506457 AX101496
3.0 m (10 ft.) 62857506458 AX101497
4.6 m (15 ft.) 62857506459 AX101498
7.6 m (25 ft.) 62857506460 AX101499
Description WESCO #
Mfg. #
GigaBIX Patch Cord, BIX-8mod, T568A
1.2 m (4 ft.) 62857506461 AX101500
1.8 m (6 ft.) 62857506462 AX101501
2.4 m (8 ft.) 62857506463 AX101502
3.0 m (10 ft.) 62857506464 AX101503
4.6 m (15 ft.) 62857506465 AX101504
7.6 m (25 ft.) 62857506466 AX101505
Description WESCO #
Mfg. #
GigaBIX Patch Cord, BIX-8mod, T568B
1.2 m (4 ft.) 62857506467 AX101506
1.8 m (6 ft.) 62857506468 AX101507
2.4 m (8 ft.) 62857506469 AX101508
3.0 m (10 ft.) 62857506470 AX101509
4.6 m (15 ft.) 62857506471 AX101510
7.6 m (25 ft.) 62857506472 AX101511
GigaBIX Cross-Connect Wire
GigaBIX Cross-Connect Wire
24570521 GigaBIX Crossconnect Wire, 4-pair
GigaBIX Cross-Connect Wire is intended for use between GigaBIX cross-connect
fields in a Telecommunications Room or in a Main Cross-Connect Frame. Using
GigaBIX Cross-Connect Wire allows for very flexible and cost-effective installations.
The cut-to-length jumper eliminates need for slack management and guarantees
permanent installation aesthetics. The GigaBIX Cross-Connect Wire offers
transmission performance that goes Beyond Category 6 providing additional margin
to support Gigabit applications.
Color Code: White/Blue, White/Orange, White/Green, White/Brown.
Description WESCO #
Mfg. #
GigaBIX Cross-Connect Wire, 4-pair
Wh/Bl/Wh/Or/Wh/Gr/Wh/Br, 305m (1000 ft)
Spool
62857500864 24570521
Spool-in-Box 62857501485 24577315
Copper Media
GigaBIX Cable Management Accessories
AX101469 GigaBIX Cable
Management Module
GigaBIX Cable Management Module
The GigaBIX Cable Management Module is an accessory that allows all terminated
cables to be brought from the same side (top or bottom) in a high-density GigaBIX
installation (4-mount stack). The modules are stackable side-to-side and top-tobottom with alignment features to ease installation. The modules can be used
horizontally to create a horizontal management channel for more flexibility in a sideto-side patching layout using GigaBIX Patch Cords.
AX101468 GigaBIX Patch Cord
Organizer and AX101521 GigaBIX
Patch Cord Organizer Cover
GigaBIX Patch Cord Organizer
The GigaBIX Patch Cord Organizer is a metal trough that interlocks with GigaBIX
Mounts to create a vertical management channel for GigaBIX Patch Cords. The
Patch Cord Organizer has 6 openings per side to nicely dress the patch cords while
clearing the labeling area on the GigaBIX Mount. The organizer can be assembled
over Cable Management Modules in large patch cord installations. A Patch Cord
Organizer Cover can be purchased separately to hide the patch cords and give a
very professional and high-tech look to the installation.
Horizontal Channel Plates are accessories that attach to the Patch Cord Organizers
to create a horizontal management channel for GigaBIX Patch Cords. The plates are
used in pairs and are designed to keep patch cords inside the horizontal channel.
21
AX101478 GigaBIX Management
Ring
GigaBIX Management Ring
The GigaBIX Management Ring is a plastic ring that interlocks with the GigaBIX
Mounts to create a high-density wall-mount cross-connect system. The rings are
assembled in systems using cross-connect wire and have a capacity of 450 GigaBIX
Cross-Connect Wires (1800-pair total).
AX101520 GigaBIX Horizontal
Channel Plate
Description GigaBIX Cable Management Module
GigaBIX Patch Cord Organizer
Cover
Horizontal Channel Plate
GigaBIX Management Ring
WESCO # 62857506438
62857506437
62857506482
62857506481
62857506446
Mfg. #
AX101469
AX101468
AX101521
AX101520
AX101478
AX102154 GigaBIX
Color-Coded Clip
Copper Media
GigaBIX Multi System
Cable Management Accessories
GigaBIX Distribution Frame & Accessories
GigaBIX Distribution Frames provide a compact mounting unit for large cross-connect installations of data or
voice services.
The GigaBIX Distribution Frame can accommodate up to (16) 12-connector GigaBIX Mounts, eight on the
equipment side and eight on the distribution side. The GigaBIX Distribution Frame has a capacity of 1152 ports or
4800 pairs. It is backwards compatible with BIX Mounts (QMBIX12E) and can be used to continue a row of BIX
Distribution Frames (QFBIX24E).
The GigaBIX Frame End Kit consists of eight (8) cable trays and eight (8) distribution rings plus
appropriate mounting hardware. One kit is required to support GigaBIX Cross-Connect Wires on the sides of a
single-frame installation or on the end frames of a multi-frame installation.
The GigaBIX Overhead Kit consists of two (2) metal bars and four (4) “J” bolts plus appropriate mounting
hardware to support cable ladder (not included) running over a row of GigaBIX Distribution Frames.
22
Mfg. #
Description
AX102073
Distribution Frame, 1152 ports/4800 pairs
AX102082
Frame End Kit
AX102145
Frame Overhead Kit
These products are in the process of being assessed for RoHS
compliance. Please check our Web Site for the most current RoHS
status.
AX102073 GigaBIX Distribution Frame
Copper Media
BIX Cross-Connect System
BIX Distribution Connectors
A0393146 QCBIX1A4 Connector
The BIX Distribution Connector is a 25-pair connector with measured performance
that greatly exceeds the Category 5e standard. The connector’s symmetrical
construction allows termination of cables on one side and cross-connect jumper
wires or BIX patch cords on the other. Each BIX connector is equipped with 50
double-ended Insulation Displacement Connection (IDC) clips for terminating plastic
insulated solid copper conductors without stripping. The connector is built with two
staggered rows of IDC clips enclosed in a three-layer construction of fire-retardant
plastic wafers. Pair splitters on each side of the connector facilitate wire insertion.
Description
BIX Distribution Connector
QCBIX1A, 25-pair, 5-pair Marking
QCBIX1A4, 25-pair, 4-pair Marking
WESCO #
Mfg. #
62857503989
62857504168
A0266828
A0393146
BIX Multiplying Connectors
A0266827 QCBIX5A Multiplying
Connector
BIX Multiplying Connectors are used to generate multiple outputs from a single
input. Construction of these connectors is identical to that of BIX Distribution
Connectors, except for the IDC clips which are bridged. BIX Multiplying Connectors
are typically used in voice applications.
The QCBIX2A Connector is built using 24 sets of bridged clips (2 clips each). It is
used to terminate various facilities where multiples of 2 are required.
The QCBIX5A Connector is built using 10 sets of bridged clips (5 clips each). It is
used for multiple jumper connections to the same equipment.
The QCBIX7A Connector is built using 10 sets of bridged clips (four 2-clip and
six 7-clip bridged arrangements). It is primarily intended for use with 1A-type key
telephone systems. Each connector will terminate one line of key equipment and
provide up to seven multiples of key telephone sets.
Description
BIX Multiplying Connector
QCBIX2A, 25-pair, 12x2-pair
QCBIX5A, 25-pair, 5x5-pair
QCBIX7A, 25-pair, 2x2-pair and 3x7-pair
WESCO #
Mfg. #
62857503993
62857503988
62857503994
A0269923
A0266827
A0269925
BIX Modular Jack Connectors
AX100798 BIX Modular Jack
Connector
BIX Modular Jack Connectors provide a fast and flexible method to manage
small-to-medium cross-connect installations. These connectors are built with a
BIX connector pre-wired to standard modular jacks.
They allow front-access termination and patching. The NXXCBMC6U connector
is a 6-port, 8-position modular connector used for data applications. It exceeds all
Category 5e channel requirements when used with PS5 Modular Cords in an IBDN
1200 System. QCBIX36-type connectors are used mostly for voice applications.
The QCBIX36D connector is a 6-port, 8-position modular connector. It is pre-wired
to USOC8-wire wiring scheme specifications. The QCBIX36C connector is an 8port, 6-position modular connector. It is pre-wired to USOC 6-wire wiring scheme
specifications. The QCBIX36B connector is a 12- port, 6-position modular connector.
It is pre-wired to USOC 4-wire wiring scheme specifications.
Description
BIX Modular Jack Connector
NXXCBMC6U, 6-port, PS5, T568A/B Coded
QCBIX36D, 6-port, USOC, 8-pin
QCBIX36C, 8-port, USOC, 6-pin
QCBIX36D, 12-port, USOC, 4-pin
WESCO #
Mfg. #
62857505873
62857504088
62857504057
62857504056
AX100798
A0341173
A0330864
A0330863
23
Copper Media
Mounts, Covers and Wire Management Accessories
A0340836 QMBIX12E BIX Mount,
300-pair
BIX Mount
BIX Mounts are basic components used in building a cross-connect system. They
can accept BIX Distribution, Multiplying or Modular Jack Connectors. The 300 and
250-pair mounts can be wall-mounted or installed on BIX Frames. These mounts
feature an interlocking design allowing them to be stacked for larger cross-connect
installations.
A0284798 QMBIX10C BIX Mount,
50-pair
A0277853 QMBIX31A 50-pair
Mount with Locking Cover
The BIX 50-pair Mount is typically used in small cross-connect installations. Also
available is a 50-pair mount with cover that is sold as an assembly and is typically
used in small cross-connect installations where security and/or dust protection is
required.
BIX Cover
BIX Covers can be used to restrict access of cross-connect installations for better
protection and security.
Two sizes are available to suit either the QMBIX12E 300-pair mount or the
QMBIX10A 250-pair mount. The two locking covers used in wall or frame-mounted
installations are molded with translucent plastic allowing visual inspection. Also
available are two covers used exclusively in stand-alone QMBIX10A 250-pair mount
installations: one locking, the other non-locking—both have four cable entries, one at
each corner.
Distribution Ring
24
A0285986 Locking Cover for 250pair Mount
The Distribution Ring is used in wall mount installations providing a cross-connect
channel for jumper wires, patch cords and cables. The Distribution Ring interlocks
with the QMBIX12E or QMBIX10A mounts, providing proper spacing and alignment.
Wire Retainer
The Wire Retainer is a plastic extrusion that fits over teh terminated wires on a BIX
Connector to prevent them from pulling out of the IDC contacts. It can be used to
secure a permanent connection on either side of a BIX Connector.
Designation Strip
A0270168 Distribution Ring
The Designation Strip is designed to be used in conjunction with all BIX Mounts and
BIX Connectors. It snaps in between two connectors and provides space for self
adhesive labels. The strip is made of white fire-retardant plastic with ridges on the top
and bottom for easy alignment and placement of designation labels.
WESCO #
62857504084
62857503997
62857504014
Order #
A0340836
A0270164
A0284798
Mfg.#
QMBIX12E
QMBIX10A
QMBIX10C
Description
BIX Mount, QMBIX12E (300-pair)
BIX Mount, QMBIX10A (250-pair)
BIX Mount, 50-pair
62857504012
62857504013
62857504086
62857504015
62857504010
62857504008
A0277853
A0277854
A0340838
A0285986
A0276396
A0276394
QMBIX31A
QMBIX31B
QCABIX32E
QCABIX32A
QCABIX28A
QCABIX26A
BIX Mount with Cover, 50-pair with Locking Cover
BIX Mount with Cover, 50-pair with Snap-on Cover
BIX Locking Cover, for QMBIX12E (300-pair)
BIX Locking Cover, for QMBIX10A (250-pair)
BIX Cover, QMBIX10A, Stand-alone Installation, locking
BIX Cover, QMBIX10A, Stand-alone Installation, non-locking
62857504000
62857504001
A0270168
A0270169
QRBIX19A
QSBIX20A
Distribution Ring
BIX Designation Strip, White, 50/pack
Copper Media
BIX Distribution Frames, Universal BIX-PAC
and Trunk Access Blocks
BIX Distribution Frame
A0340837 BIX Frame
BIX Distribution Frames provide a compact mounting unit for large cross-connect
installations. The QFBIX24E BIX Frame can accommodate up to 16 QMBIX12E
300-pair mounts, eight on the vertical side and eight on the horizontal side. The
QFBIX24E BIX Frame has a capacity of 4800-pair. The QFBIX24A BIX Frame can
accommodate up to 16 QMBIX10A 250-pair mounts, eight on the vertical side and
eight on the horizontal side. The QFBIX24A BIX Frame has a capacity of 4000-pair.
The BIX Frame End Kit consists of eight cable trays and eight distribution rings plus
appropriate mounting hardware. One kit is required to support cross-connect wires on
the sides of the shelves in a single-frame installation or on the end frames of a multiframe installation.
The Distribution Rings are plastic rings used to manage cross-connect wires.
Universal BIX-PAC
A0321776 Universal BIX-PAC
Version 10-10
The Universal BIX-PAC provides a fast, factory-wired, pre-tested and easy-to-install
method of terminating wiring for the voice environment. A typical application for this
product is in the main distribution terminal system or the riser terminal system, where
it can provide connectivity and cross-connection for up to 250 pairs. The units come
equipped with up to 10 QCBIX1A Connectors and 10 fifty-pin type telco connectors
for the termination of connectorized cables. Also available is a BIX-PAC Enclosure,
which is a fire-retardant polystyrene structural foam box that can house one BIXPAC. The enclosure has a snap-on cover and removable panels for cable entry on
top, bottom and sides.
BIX Trunk Access Block
BIX Trunk Access Blocks provide a fast, factory-wired, pre-tested and easy-to-install
method for demarcation or testing points on customer premises. Typical applications
are in the building entrance system or the main distribution terminal system, where
the demarcation point between the network provider and the customer equipment
usually can be found.
A0318897 BIX PAC Enclosure
A0327326 BIX Trunk Access Block
Mfg.#
Description
BIX Distribution Frame
A0340837
BIX Distribution Frame, 4800-pair (4 Shelves for 16 Mounts, 300-pair)
A0275511
BIX Distribution Frame, 4000-pair (4 Shelves for 16 Mounts, 250-pair)
BIX Distribution Frame Accessories
A0275512*
BIX Distribution Frame Accessories, End Kit (4 Shelves)
P0596540*
BIX Distribution Frame Accessories, Distribution Ring
Universal BIX-PAC
A0321775
Universal BIX-PAC, 10-8, 8 RJ21X Female to 8 QCBIX1A Connectors
A0321776
Universal BIX-PAC, 10-10, 10 RJ21X Female to 10 QCBIX1A Connectors
BIX PAC Enclosure
A0318897
BIX PAC Enclosure, Gray
BIX Trunk Access Block
A0327325
BIX Trunk Access Block, 1 RJ21X Female to 1 QCBIX1A Connector
A0327326
BIX Trunk Access Block, 2 RJ21X Female to 2 QCBIX1A Connector
*Eight Distribution Rings come as part of the BIX Distribution Frame End Kit. Additional Distribution Rings can
be ordered separately. Use (1) end kit per row of frames.
These products are in the process of being assessed for RoHS compliance. Please check our Web Site for
the most current RoHS status.
25
Copper Media
BIX Patch Cords and B-Plus Cross-Connect Wire
A0410494 BIX Patch Cord, BIXBIX, 2-pair
BIX Patch Cords
BIX Patch Cords allow for high-density connections, coupled with flexibility for costeffective installation and administration. Installation and rearrangement of patch
cords do not require any special tools or training. BIX Patch Cord plugs terminate
directly into QCBIX1A/1A4 connectors.
A0410469 BIX Patch Cord, BIXBIX, 1-pair
26
22208260 B-Plus Cross-Connect
Wire
Description
WESCO #
Mfg. #
BIX Patch Cord, PS5 BIX-BIX, 4-Pair
1.2 m (4 ft.)
62857505720 AX100625
2.1 m (7 ft.)
62857505721 AX100626
3.0 m (10 ft.)
62857505722 AX100627
4.6 m (15 ft.)
62857505723 AX100628
7.6 m (25 ft.)
62857505724 AX100629
BIX Patch Cord, PS5 BIX-8MOD, T568A
4-pair, 1.2 m (4 ft.) 62857505725 AX100630
4-pair, 2.1 m (7 ft.) 62857505726 AX100631
4-pair, 3.0 m (10 ft.) 62857505727 AX100632
4-pair, 4.6 m (15 ft.) 62857505728 AX100633
4-pair, 7.6 m (25 ft.) 62857505729 AX100634
BIX Patch Cord, PS5 BIX-8MOD, T568B
4-pair, 1.2 m (4 ft.) 62857505730 AX100635
4-pair, 2.1 m (7 ft.) 62857505731 AX100636
4-pair, 3.0 m (10 ft.) 62857505732 AX100637
4-pair, 4.6 m (15 ft.) 62857505733 AX100638
4-pair, 7.6 m (25 ft.) 62857505734 AX100639
Description
WESCO #
BIX Patch Cord, BIX-BIX, 2-Pair
1.2 m (4 ft.)
62857504394
2.1 m (7 ft.)
62857504395
3.0 m (10 ft.)
62857504396
4.6 m (15 ft.)
62857504397
BIX Patch Cord, BIX-BIX, 1-Pair
1.2 m (4 ft.)
62857504389
2.1 m (7 ft.)
62857504390
3.0 m (10 ft.)
62857504391
4.6 m (15 ft.)
62857504392
7.6 m (25 ft.)
62857504393
Mfg. #
A0410494
A0410495
A0410496
A0410497
A0410469
A0410471
A0410473
A0410475
A0410493
B-Plus Cross-Connect Wire
B-Plus Cross-Connect Wire is intended primarily for use between incoming cables
and station equipment in a Telecommunications Room or at a Main Cross-Connect.
Z Cross-Connect Wire is intended primarily for use in voice applications such as
cross-connecting PBX or Key Telephone system equipment to backbone or horizontal
distribution cables.
Description
IBDN B-Plus Cross-Connect Wire, 24 AWG
1-pair, Wh/Bl, 1000 ft., K-Carton
1-pair, Wh/Bl, 12400 ft., Spool (16N)
1-pair, Wh/Bl, 1000 ft., Spool (S77)
2-pair, Wh/Bl/Or, 1000 ft., K-Carton
2-pair, Wh/Bl/Or, 1000 ft., Spool (S77)
2-pair, Wh/Bl/Or, 1000 ft., K-Carton
3-pair, Wh/Bl/Or/Wh/Gr, 500 ft., K-Carton
4-pair, Wh/Bl/Wh/Or/Wh/Gr/Wh/Br, 500 ft., K-Carton
WESCO #
Mfg. #
62857500031
62857500032
62857500033
62857500036
62857500039
62857500027
62857500041
62857500042
22208250
22208252
22208253
22208260
22208263
22208231
22208265
22208270
Copper Media
Tools and Labeling
Tools & Accessories
BIX Connecting Tool
C0054642
Tool Pouch
A0270166 BIX Test Probe
The BIX Connecting Tool is the only tool required to terminate cables, pigtails or
jumper wires on all GigaBIX and BIX connection products. The BIX Connecting Tool
is a spring-activated hand tool. A single forward movement will seat the wire into the
BIX IDC clip and cut off the excess wire. The tool will terminate 22-26-AWG plastic
insulated solid copper conductors. A separate leather BIX Tool Pouch to carry and
protect the BIX Tool can be ordered.
BIX Test Probe
The BIX Test Probe is a single-pair probe that clips onto the termination clip of BIX
Distribution or BIX Modular Jack Connectors to facilitate testing.
BIX Accessories
A0270172
Special Service
Guard
The BIX Special Service Guard is a single-pair red plastic clip used to identify a
connection within a BIX distribution field that requires special attention prior to any
maintenance work.
The BIX Bridging Clip is a single-pair clip used to bridge single-pair connections of
two BIX connectors.
A0325493
Bridging Clip
The BIX Wire Retainer is a plastic extrusion that fits over the terminated wires on a
BIX Connector to prevent them from being pulled out of the IDC contacts. It can be
used to secure a permanent connection on either side of a BIX Connector.
This 19 in. Rack Bracket Kit provides the hardware for BIX Mount installation into
a 19 in. rack. This kit comes complete with two mounting bars, four screws for rack
mounting, four screws for BIX Mount assemblies and an installation guide.
P0660798 BIX Wire
Retainer
BIX Cable Ties are used for securing wire bundles to the BIX Connector.
BIX Designation Strip
C0039222 BIX
Cable Tie
The BIX Designation Strip is designed to be used in conjunction with all BIX Mounts
and BIX Connectors. It snaps in between two connectors and provides space for self
adhesive BIX labels. The strip is made of white fire-retardant plastic, with ridges on
the top and bottom for easy alignment and placement of designation labels. (See the
LabelFlex section for designation labels.)
A0352331 19 in. Rack
Bracket Kit
GigaFlex Connecting Tool
AX100749 GigaFlex Connecting
Tool
The GigaFlex Connecting Tool is a no-impact connecting tool used to terminate
cables, pigtails or cross-connect wires on any GigaFlex Module or 110 product. The
GigaFlex Tool is a spring-activated hand tool. A single forward movement will seat
the wire into the IDC clip and cut off the excess wire. The tool will terminate 22, 24
and 26-AWG plastic insulated solid copper conductors.
Bonded-Pair Cable Preparation Tool
The Bonded-Pair Cable Preparation Tool makes it faster and easier to prepare
cables for connector termination. This tool is ideal for use with Belden’s DataTwist®
350, MediaTwist®, and DataTwist® 600e Bonded-Pair cables, providing special
features that help separate twisted pairs. It can also be used to prepare any
nonbonded-pair cable for installation.
;
27
Copper Media
Tools and Labeling
Tools & Accessories (continued)
AX101852 Termination Station
Termination Station
The Termination Station is an ergonomically designed holder that provides
stability to the GigaFlex Module during the termination process. The station
has pockets with locking features that steadily holds either MDVO-style
or Keystone-style GigaFlex Modules or MediaFlex Inserts during pair
placement and wire termination. Cable retainers on each end of the station
will secure and hold cables during the pair placements process. The flat
bottom surface will provide the required stability to safely terminate the
modules. The tool is made of very durable plastic and its low profile makes it
an easy tool to use and carry.
AX101185 Outlet Release Tool
Outlet Release Tool
The Outlet Release Tool is a very convenient tool for servicing the MediaFlex
and Interface outlets. Its bent tip allows for easy front removal of MediaFlex
inserts, especially when used in Angled Entry plates. It is also very useful
to extract GigaFlex Modules from miscellaneous mounting hardware and to
remove the protective cap for GigaFlex Module re-termination.
28
WESCO #
Order #
Mfg.#
Description
62857503998
A0270165
QTBIX16A
BIX Connecting Tool
62857507688
C0054642
QTBIX16S
Tool Pouch
62857503999
A0270166
QTBIX17A
BIX Test Probe, 1-pair, 1/pack
62857524447
AX270172
62857504042
A0325091
QLBIX38A
BIX Bridging Clip, 1-pair, Gray, 50/pack
62857504043
A0325493
QLBIX38B
BIX Bridging Clip, 1-pair, White, 50/pack
62857510528
P0660798
62857504108
A0352331
62857507687
C0039222
62857505835
AX100749
NXXCACT
GigaFlex Connecting Tool
62857510790
AX101852
NXFTSMKB2
OutletTermination Station
62857506165
AX101185
NXMRT
Outlet Release Tool
62857509292
AX101719
BIX Special Service Guard, 1-pair, Red, 50/pack
Bix Wire Retainer
QKBIX41A
19 in. Rack Bracket Kit, 2 bars/pack
BIX Cable Tie, 100/pack
GigaBIX spacer clip, 100/pack
Copper Media
Labeling
LabelFlex
AX101537 LabelFlex Labels
LabelFlex Automated Labeling Solution
The LabelFlex solution is aimed at simplifying network management. Using the
labeling system (software and label types), the installer can rapidly produce quality,
application specific labels for most Belden IBDN products in a fraction of the time
taken by traditional methods.
The range of Belden IBDN products covered by the labeling system is:
GigaBIX & BIX Cross-Connect Systems
BIX Modular Jack Connectors
110 Cross-Connect System
GigaFlex Cat 6+ Patch Panels
Description
LabelFlex Labeling System
Labels for BIX and GigaBIX
Grey, 15 labels/sheet,
5 sheets/pack White, 15 labels/sheet,
5 sheets/pack Orange, 15 labels/sheet,
5 sheets/pack
Red, 15 labels/sheet,
5 sheets/pack Yellow, 15 labels/sheet,
5 sheets/pack Green, 15 labels/sheet,
5 sheets/pack Blue, 15 labels/sheet,
5 sheets/pack Purple, 15 labels/sheet,
5 sheets/pack
Brown, 15 labels/sheet,
5 sheets/pack Silver, 15 labels/sheet,
5 sheets/pack Labels for BIX Modular Jack
5 sheets/pack White, 28 labels/sheet,
5 sheets/pack Orange, 28 labels/sheet,
5 sheets/pack
Red, 28 labels/sheet,
5 sheets/pack Yellow, 28 labels/sheet,
5 sheets/pack Green, 28 labels/sheet,
5 sheets/pack Blue, 28 labels/sheet,
5 sheets/pack Purple, 28 labels/sheet,
5 sheets/pack Brown, 28 labels/sheet,
5 sheets/pack Silver, 28 labels/sheet,
5 sheets/pack
Labels for 110 Cross-Connect
Orange, 18 labels/sheet,
5 sheets/pack: Red, 18 labels/sheet,
5 sheets/pack Flex Patch Panels
Workstation Outlets
MediaFlex Faceplates series
Cable Applications, 4-pair and 25-pair
WESCO #
Mfg. #
62857506491
AX101532
62857506492
AX101533
62857506493
AX101534
62857506494
AX101535
62857506495
AX101536
62857506496
AX101537
62857506497
AX101538
62857506498
AX101539
62857506499
AX101540
62857506500
AX101541
62857506501
AX101542
62857506502
AX101543
62857506503
AX101544
62857506504
AX101545
62857506505
AX101546
62857506506
AX101547
62857506507
AX101548
62857506508
AX101549
62857506509
AX101550
62857506541
AX101584
62857506516
AX101557
62857506517
AX101558
ID Tubes
PS5E HD Patch Panels
Description
WESCO #
Labels for 110 Cross-Connect
Yellow, 18 labels/sheet,
5 sheets/pack
62857506518
Green, 18 labels/sheet,
5 sheets/pack 62857506519
Blue, 18 labels/sheet,
Purple, 18 labels/sheet,
Brown, 18 labels/sheet,
White, 18 labels/sheet,
Labels for Flex Patch Panels
Labels for Workstation Faceplates,
Labels for Workstation Single Port ID,
Labels for HD Patch Panels,
Labels for GigaFlex Cat 6+ Patch Panels,
5 sheets/Pack 62857508680
Labels for 4-pair cables,
Labels for 25-pair cables,
Labels for ID Tubes 3.1 in. long,
5 sheets/pack
62857506525
Silver, 19 labels/sheet,
Automated Labeling Software,
1 label/sheet, 1 CD/pack 62857506528
Mfg. #
AX101559
AX101560
AX101561
AX101562
AX101563
AX101564
AX101565
AX101551
AX101552
AX101553
AX101554
AX101626
AX101555
AX101556
AX101566
AX101567
AX101568
AX101569
The LabelFlex System items are non-returnable and the orders are
non-cancellable.
29
Copper Media
Patch Panels & Patch Boxes
GigaFlex Cat 6+ Patch Panels
AX101613 GigaFlex Cat 6+ Patch
Panel, 2U, 48-port
GigaFlex PS6+ Patch Panel
The GigaFlex Cat 6+ Patch Panel is a fully loaded patch panel using black
GigaFlex Cat 6+ Modules. The unmatched performance of the GigaFlex Cat
6+ Module exceeds all parameters specified in the Category 6 standard. All
performance characteristics including NEXT, FEXT, Attenuation and Return
Loss have been set to guarantee transmission performance up to 300 MHz
and a data-rate of up to 4.8 Gb/s.
Description
WESCO # GigaFlex Cat 6+ Patch Panel, 1U
24-port, Grey
62857506547
24-port, Black
62857506546
GigaFlex Cat 6+ Patch Panel, 2U
48-port, Grey
62857506549
48-port, Black
62857506548
Mfg. #
AX101612
AX101611
AX101614
AX101613
Other configurations (16, 32, 96 and 144) are available subject to
minimum quantity orders.
Cat 5E Patch Panels
Patch Panels 5E,
Cat 5E BIX Panels and Flex Panels
Cat 5E HD Patch Panel
AX100465 Cat 5E HD Patch Panel,
1U, 24-port
30
AX100473 Cat 5E HD Patch Panel,
2U, 48-port
The Universal Cat 5E HD Patch Panels Series includes a variety of product
styles, sizes and wiring configurations. Cat 5E HD Patch Panels are
robust and installer-friendly products by design, combining punch down
connectors with standard modular jacks. They are available in both BIX
and 110 Insulation Displacement Connection (IDC) options. A color-coded
icon labeling system can be used to tag each patch panel port and simplify
network management (ordered separately). Cat 5E HD Patch Panels offer
Category 5E performance.
Cat 5E BIX Patch Panel
The Cat 5E BIX Patch Panel is a medium density panel, 24-port in 2 rack
space units, for easier installation and cable management than high density
panels. The Cat 5E BIX Patch Panel is a robust and installer-friendly
product by design, combining BIX punch down connectors with standard
modular jacks. The patch panel features built-in wire management to secure
cable bundles and to control and maintain patch cord bend radius. A colorcoded icon labeling system can be used to tag each patch panel port and
simplify network management (ordered separately). The Cat 5E BIX Patch
Panel offers Category 5E performance.
Description
Cat 5E HDU-BIX Patch Panel,
24-port, Grey, T568A/B
24-port, Black, T568A/B
;
1U
2U
3U
4U
WESCO #
Mfg. #
62857505571
62857505572
AX100464
AX100465
62857505579
62857505580
AX100472
AX100473
62857505587
62857505588
AX100480
AX100481
62857505591
62857505592
AX100484
AX100485
Copper Media
Patch Panels & Patch Boxes
Cat 5E Patch Panels (continued)
Cat 5E HD Patch Boxes,
Connector Modules and Identification Accessories
AX100284 HD Patch Box, Closed
AX100284 HD Patch Box, Open
Cat 5E HD Patch Box
The Cat 5E HD Patch Boxes are available in BIX and 110 configurations
and hold one 12-port universal connector module in a compact and robust
metal enclosure. The patch box features a hinged cover and support
brackets to secure cables and maintain patch cord bend radius. A colorcoded icon labeling system can be used to tag each patch panel port
and simplify network management (ordered separately) All performance
parameters, including NEXT, Attenuation and Return Loss are designed to
meet the Category 5E Cabling standard.
An MDVO Patch Box is also available that can be custom configured in the
field using up to 12 GigaFlex, EZ-MDVO or MDVO Multimedia Modules.
Modules are ordered separately.
AX100282 MDVO Patch Box
AX101456 Flex Patch Panel
Description
Cat 5E HDU-BIX Patch Box
HD-BIX Universal Connector Module
12-port, T568A/B
MDVO Patch Box
12-port, Black
MDV Patch Box
12-port, Gray
WESCO #
Mfg. #
62857505419
62857505420
AX100283
AX100284
62857505565
AX100458
62857505418
AX100282
62857505417
AX100281
Flex Patch Panel
Flex Patch Panels provide a flexible and versatile termination solution for
telecommunications room rack-mounted installations. The panels can be
custom configured in the field to suit practically any particular configuration.
Flex Patch Panels are compatible with GigaFlex and EZ-MDVO modules as
well as MDVO-style Multimedia modules. Modules are ordered separately.
Description
Flex Patch Panel, 1U
24-port, Grey
24-port, Black
Flex Patch Panel, 2U
48-port, Grey
48-port, Black
WESCO #
Mfg. #
62857506530
62857506425
AX101571
AX101456
62857506532
62857506427
AX101573
AX101458
Other configurations (16, 32, 96 and 144) are available subject to
minimum quantity orders.
31
Copper Media
Modular Connectivity
MDVO Blank Inserts & EZ-MDVO ID Tabs
A0405538 MDVO Blank Insert
MDVO Blank Insert
MDVO Blank Inserts can be used in any MediaFlex outlets, Interface plates, MDVO
faceplates, adapters or boxes to fill in unused ports.
ID Tab
ID Tabs are color-coded identification caps that can be inserted over the GigaFlex
and EZ-MDVO Modules. The ID tabs are available as blank, data or voice coded.
They are available in eleven colors to facilitate identification and to match modern
office decor.
The flexible identification cap also acts as a protective cover eliminating exposure to
dust and other contaminants when the module is not in use.
AX100196 ID Tab
Description
MDVO Blank Insert
Grey
Almond
White
Black
32
Description
EZ-MDVO ID Tabs
Grey
Almond
White
Black
Orange
Red
Yellow
Green
Blue
Purple
Brown
WESCO #
Mfg. #
62857504320
62857504321
62857504322
62857504323
A0405536
A0405537
A0405538
A0405539
WESCO #
Blank
Mfg. #
Blank
WESCO #
Data
Mfg. #
Data
WESCO #
Voice
Mfg. #
Voice
62857505360
62857505361
62857505362
62857505363
62857505364
62857505365
62857505366
62857505367
62857505368
62857505369
62857505370
AX100182
AX100183
AX100184
AX100185
AX100186
AX100187
AX100188
AX100189
AX100190
AX100191
AX100192
62857505371
62857505372
62857505373
62857505374
62857505375
62857505376
62857505377
62857505378
62857505379
62857505380
62857505381
AX100193
AX100194
AX100195
AX100196
AX100197
AX100198
AX100199
AX100200
AX100201
AX100202
AX100203
62857505382
62857505383
62857505384
62857505385
62857505386
62857505387
62857505388
62857505389
62857505390
62857505391
62857505392
AX100204
AX100205
AX100206
AX100207
AX100208
AX100209
AX100210
AX100211
AX100212
AX100213
AX100214
Standard shipping carton of 500 units.
GigaFlex Cat 6+ Modules
AX101067 GigaFlex PS6+Module
GigaFlex Cat 6+ Module
The GigaFlex Cat 6+ Module is a punch down UTP connector based on a
patented Encapsulated Lead Frame technology ensuring excellent longterm reliability as well as extremely stable transmission performance. The
unmatched Beyond Cat 6 performance exceeds all parameters specified in
the Category 6 standard. All performance characteristics have been set to
guarantee transmission performance up to 300 MHz and a data-rate of up to
4.8 Gb/s.
The GigaFlex Cat 6+ is the module of choice for terminating UTP cables into
the MediaFlex and Interface Outlet Series. It can also be mixed and matched
with a wide variety of MDVO adapters, boxes and patch panels to suit
practically any installation configuration for workstation outlet, consolidation
point and telecommunications room applications.
A keystone-style is also available for terminating UTP cables into keystonestyle mounting hardware. It can be easily snapped into simple sheet metal
cut-outs (panel mounting) for installation into consolidation point or multi-user
custom-built devices.
Also available is the GigaFlex Cat 6+ Module, Clipsal-style which is fully
compatible with Clipsal faceplates and mounting hardware.
Description
WESCO # GigaFlex Cat 6+ Module, T568A/B
Grey 62857506043
Almond 62857506044
White 62857506045
Black 62857506047
Orange 62857506049
Mfg. #
Description
WESCO # Mfg. #
AX101063
AX101064
AX101065
AX101066
AX101067
Red Yellow Green Blue Purple Brown 62857506050
62857506051
62857506052
62857506053
62857506054
62857506055
AX101068
AX101069
AX101070
AX101071
AX101072
AX101073
Copper Media
EZ-MDVO Cat 5E Modules
AX100654 EZ-MDVO Cat 5E
Module
AX100177 EZ-MDVO Module,
USOC-coded
EZ-MDVO Cat 5E Module
The EZ-MDVO Module is built with a patented lead frame design and encapsulated
insulation displacement contacts, ensuring reliable connections and performance
well above Category 5E standards. The EZ-MDVO module termination cap is what
is so unique about this product. It allows for a simple and fast “press-fit” installation
while ensuring consistent wire termination every time it is snap-locked. The
module termination cap is color-coded to facilitate wire arrangement and speed up
installation time. The termination cap is printed with the T568A/B color-codes. The
EZ-MDVO Modules can be mixed and matched with a wide variety of MediaFlex,
Interface and MDVO-style faceplates, adapters and boxes to suit practically any
installation configuration for workstation outlet installations.
A keystone-style is also available for terminating UTP cables into keystone-style
mounting hardware. It can be easily snapped into simple sheet metal cut-outs (panel
mounting) for installation into consolidation point or multi-user custom-built devices.
Clipsal-style EZ-MDVO Modules are available for installations using commercially
available Clipsal faceplates and HPM-style EZ-MDVO Modules are available for
installations using commercially available HPM faceplates.
EZ-MDVO Module, USOC-coded
The EZ-MDVO Module USOC-coded has a narrower plug entrance and is designed
to be used for voice applications. These modules prevent connecting the computer
into the analog phone jack, which may cause damages to the electronics. Also
available is the EZ-MDVO Module, USOC-coded keystone style.
WESCO #
Order #
Mfg #
Description
62857505740
AX100645
NXM1U8NAB-01
EZ-MDVO Cat 5E Module, T568A/B coded, Gray
62857505741
AX100646
NXM1U8NAB-02
EZ-MDVO Cat 5E Module, T568A/B coded, Almond
62857505742
AX100647
NXM1U8NAB-03
EZ-MDVO Cat 5E Module, T568A/B coded, White
62857505744
AX100648
NXM1U8NAB-04
EZ-MDVO Cat 5E Module, T568A/B coded, Black
62857505746
AX100649
NXM1U8NAB-05
EZ-MDVO Cat 5E Module, T568A/B coded, Orange
62857505747
AX100650
NXM1U8NAB-06
EZ-MDVO Cat 5E Module, T568A/B coded, Red
62857505748
AX100651
NXM1U8NAB-07
EZ-MDVO Cat 5E Module, T568A/B coded, Yellow
62857505749
AX100652
NXM1U8NAB-08
EZ-MDVO Cat 5E Module, T568A/B coded, Green
62857505751
AX100653
NXM1U8NAB-09
EZ-MDVO Cat 5E Module, T568A/B coded, Blue
62857505753
AX100654
NXM1U8NAB-10
EZ-MDVO Cat 5E Module, T568A/B coded, Purple
62857505754
AX100655
NXM1U8NAB-11
EZ-MDVO Cat 5E Module, T568A/B coded, Brown
62857505349
AX100171
NXM1U6NUS-01
EZ-MDVO Module, USOC-coded, 6 position, Gray
62857505350
AX100172
NXM1U6NUS-02
EZ-MDVO Module, USOC-coded, 6 position, Almond
62857505351
AX100173
NXM1U6NUS-03
EZ-MDVO Module, USOC-coded, 6 position, White
62857505352
AX100174
NXM1U6NUS-04
EZ-MDVO Module, USOC-coded, 6 position, Black
62857505353
AX100175
NXM1U6NUS-05
EZ-MDVO Module, USOC-coded, 6 position, Orange
62857505354
AX100176
NXM1U6NUS-06
EZ-MDVO Module, USOC-coded, 6 position, Red
62857505355
AX100177
NXM1U6NUS-07
EZ-MDVO Module, USOC-coded, 6 position, Yellow
62857505356
AX100178
NXM1U6NUS-08
EZ-MDVO Module, USOC-coded, 6 position, Green
62857505357
AX100179
NXM1U6NUS-09
EZ-MDVO Module, USOC-coded, 6 position, Blue
62857505358
AX100180
NXM1U6NUS-10
EZ-MDVO Module, USOC-coded, 6 position, Purple
62857505359
AX100181
NXM1U6NUS-11
EZ-MDVO Module, USOC-coded, 6 position, Brown
33
Copper Media
Flex Modules
GigaFlex Cat 5E Module
AX101051 GigaFlex Cat 5E
Module
The GigaFlex Cat 5E Module is a punch down UTP connector based on a patented
Encapsulated Lead Frame technology ensuring excellent long term reliability as
well as extremely stable transmission performance. The Cat 5E-rated performance
exceeds all requirements specified in the Category 5e standard. All performance
parameters including NEXT, FEXT, Attenuation and Return Loss have been set to
guarantee transmission performance up to 160 MHz and a data-rate of up to 1.2 Gb/s.
The GigaFlex Cat 5E is the module of choice for terminating UTP cables into the
MediaFlex and Interface Outlet Series. It can also be mixed and matched with a wide
variety of MDVO adapters, boxes and patch panels to suit practically any installation
configuration for workstation outlet, consolidation point and telecommunications room
applications.
A keystone-style is also available for terminating UTP cables into keystone-style
mounting hardware. It can be easily snapped into simple sheet metal cut-outs (panel
mounting) for installation into consolidation point or multi-user custom-built devices.
AX101037 Flex Module,
USOC-coded
Flex Module, USOC-coded
The Flex Module USOC-coded is a punch down UTP connector that has a narrower
plug entrance and a USOC 6-pin color code in the back. These modules are used
for voice applications and are designed to prevent connecting the computer into the
analog phone jack, which may cause damages to the electronics.
The Flex Module is the module of choice for voice applications in the MediaFlex
and Interface Outlet Series. It can also be mixed and matched with a wide variety
of MDVO adapters, boxes and patch panels to suit practically any installation
configuration for workstation outlet, consolidation point and telecommunications
rooms applications.
34
WESCO #
Order #
Mfg #
Description
62857506026
AX101044
NXM5AU8AB-01
GigaFlex Cat 5E Module, T568A/B, Gray
62857506027
AX101045
NXM5AU8AB-02
GigaFlex Cat 5E Module, T568A/B, Almond
62857506028
AX101046
NXM5AU8AB-03
GigaFlex Cat 5E Module, T568A/B, White
62857506030
AX101047
NXM5AU8AB-04
GigaFlex Cat 5E Module, T568A/B, Black
62857506032
AX101048
NXM5AU8AB-05
GigaFlex Cat 5E Module, T568A/B, Orange
62857506033
AX101049
NXM5AU8AB-06
GigaFlex Cat 5E Module, T568A/B, Red
62857506034
AX101050
NXM5AU8AB-07
GigaFlex Cat 5E Module, T568A/B, Yellow
62857506035
AX101051
NXM5AU8AB-08
GigaFlex Cat 5E Module, T568A/B, Green
62857506036
AX101052
NXM5AU8AB-09
GigaFlex Cat 5E Module, T568A/B, Blue
62857506037
AX101053
NXM5AU8AB-10
GigaFlex Cat 5E Module, T568A/B, Purple
62857506038
AX101054
NXM5AU8AB-11
GigaFlex Cat 5E Module, T568A/B, Brown
62857506015
AX101033
NXM3AU6US-01
Flex Module, USOC-coded, 6 position, Gray
62857506016
AX101034
NXM3AU6US-02
Flex Module, USOC-coded, 6 position, Almond
62857506017
AX101035
NXM3AU6US-03
Flex Module, USOC-coded, 6 position, White
62857506018
AX101036
NXM3AU6US-04
Flex Module, USOC-coded, 6 position, Black
62857506019
AX101037
NXM3AU6US-05
Flex Module, USOC-coded, 6 position, Orange
62857506020
AX101038
NXM3AU6US-06
Flex Module, USOC-coded, 6 position, Red
62857506021
AX101039
NXM3AU6US-07
Flex Module, USOC-coded, 6 position, Yellow
62857506022
AX101040
NXM3AU6US-08
Flex Module, USOC-coded, 6 position, Green
62857506023
AX101041
NXM3AU6US-09
Flex Module, USOC-coded, 6 position, Blue
62857506024
AX101042
NXM3AU6US-10
Flex Module, USOC-coded, 6 position, Purple
62857506025
AX101043
NXM3AU6US-11
Flex Module, USOC-coded, 6 position, Brown
Copper Media
Workstation Outlets
Interface Plates & Surface Adapter Boxes
AX101431 Interface Plate, 2-port,
shown here with modules
Interface Plate, Flush
Interface Plates combine flexibility and ease of use in work area installations. They
are designed to accept the EZ-MDVO and GigaFlex UTP modules as well as all
the MDVO Multimedia Modules.The Interface Plates are available in Single gang
and can accept up to 6 modules. They also have labeling capabilities using built-in
labeling windows. The faceplates can be attached to standard electrical boxes or
wall-mounting hardware for flush-mount installations. The faceplates can also fit over
the Interface Adapter Boxes for surface mount installations.
Interface/MDVO Surface Adapter Box
The Interface/MDVO Surface Adapter Box allows surface mounting of Interface
Plates as well as MDVO Flush and Angled entry faceplates. The box can be
mounted on any flat surface or can be attached to standard electrical boxes or wallmounting hardware for additional storage space.
Description
WESCO # Interface Surface Adapter Box
Grey
62857506442
Almond
62857506443
White
62857506444
Black
62857506445
Mfg. #
Description
Interface Plate, 2-port
Grey
Almond
White
Black
WESCO #
Mfg. #
62857506400
62857506401
62857506402
62857506403
AX101431
AX101432
AX101433
AX101434
AX101474
AX101475
AX101476
AX101477
AX101474 Interface/MDVO
Surface Adapter Box
Description
Grey
Almond
White
Black
WESCO #
Mfg. #
62857506404
62857506405
62857506406
62857506407
AX101435
AX101436
AX101437
AX101438
Description
Grey
Almond
White
Black
WESCO #
Mfg. #
62857506408
62857506409
62857506410
62857506411
AX101439
AX101440
AX101441
AX101442
35
Copper Media
Workstation Outlets
MDVOFlex Plates & Adapter Boxes
AX101786 MediaFlex Faceplate Kit, 6-port
MediaFlex Faceplate Kit
MediaFlex Plates and Inserts snap together to create a full line of modular
workstation outlets. This product line, called the MediaFlex Modular Outlet
Series, has been designed with the help of industrial designers as well as
other professionals in the industry in order to combine flexibility, ease of
use and high-tech aesthetics for work area installations.
Even though the MediaFlex series is a modular outlet system, ease and
flexibility in ordering and inventory management are also considered with
the offering of pre-configured faceplate kits (includes plate, flush MDVOstyle inserts, filler inserts, MDVO blank, labeling window covers, labeling
paper and all necessary mounting screws).
MediaFlex Plate
MediaFlex Plates are one part of the comprehensive line of plates and
inserts that snap together tocreate a full line of modular workstation outlets.
36
AX101748 MediaFlex Plate, Single Gang
MediaFlex Plates can be mounted over standard NEMA type outlet boxes
and rings to provide support for a variety of MediaFlex Adapters and
Inserts. The fully modular construction combined with the front access
design provides extensive configuration flexibility for current and future
network needs. MediaFlex Plates are available in Single gang and Double
gang configurations.
The Double gang faceplate comes with a stand-off ring included in the
package. This ring allows for easy mounting with virtually any industry
electrical box or mud/adapter rings, therefore providing added installation
flexibility.
Each plate has the capacity of up to 6 ports per Single gang and 12 ports
per Double gang.
AX101869 MediaFlex Plate, Double Gang
Description
WESCO # MDVOFlex Adapter Box, Single Gang
Grey 62857505960
Almond 62857505961
White 62857505962
Black 62857505963
Mfg. #
Description
WESCO #
MDVOFlex Plate, Single Gang
Flush, Grey
62857505944
Flush, Almond 62857505945
Flush, White 62857505946
Flush, Black 62857505947
Angled Entry, Grey 62857505948
Angled Entry, Almond 62857505949
Angled Entry, White 62857505950
Angled Entry, Black 62857505951
Mfg. #
AX100970
AX100971
AX100972
AX100973
AX100954
AX100955
AX100956
AX100957
AX100958
AX100959
AX100960
AX100961
Description
WESCO # MDVOFlex Adapter Box, Double Gang
Grey 62857505964
Almond 62857505965
White 62857505966
Black 62857505967
Mfg. #
Description
WESCO #
MDVOFlex Plate, Double Gang
Flush, Grey 62857505952
Flush, Almond 62857505953
Flush, White 62857505954
Flush, Black 62857505955
Angled Entry, Grey 62857505956
Angled Entry, Almond 62857505957
Angled Entry, White 62857505958
Angled Entry, Black 62857505959
Mfg. #
Standard Shipping carton of 10 units.
AX100974
AX100975
AX100976
AX100977
AX100962
AX100963
AX100964
AX100965
AX100966
AX100967
AX100968
AX100969
Copper Media
Workstation Outlets
MDVOFlex Adapter Inserts & MDVOFlex Multimedia Inserts
AX101756 MediaFlex MDVO
(style) Insert, 2-port, Angled
AX101752 MediaFlex MDVO
(style) Insert, 2-port, Flush
MediaFlex Insert
MediaFlex Inserts provide optimum flexibility in configuring multimedia workstation
outlets that respond to any present or future network needs. MediaFlex MDVO-style
Inserts along with MediaFlex Filler Inserts and MediaFlex GigaFlex Inserts allow for
the easy configuration of outlets. All inserts are front loaded and easily snapped in
and out of the MediaFlex Plates for simple installation and maintenance.
MediaFlex MDVO-style Inserts are available in a 2-port configuration in both Flush
and Angled versions. They are compatible with all GigaFlex and MDVO Modules
(EZ-MDVO and Multimedia). The inserts are two units high for the flush version and
three units high for the angled version. Therefore three flush inserts or two angled
inserts are required to fully populate a Single gang MediaFlex Plate.
MediaFlex GigaFlex Inserts are available in a 2-port configuration in both PS5E
(Category 5E) and PS6+ (Beyond Category 6) performance levels. The inserts are
two units high, therefore three inserts can be used to fully populate a Single gang
MediaFlex Plate making up a 6-port outlet.
AX101760 MediaFlex Filler Insert,
1-unit
MediaFlex Filler Inserts are used to fill the unused spaces in low density workstation
outlets. They are available in one unit and two unit sizes.
MediaFlex Multimedia Insert
AX101764 MediaFlex Filler Insert,
2-unit
AX101768 PS6+ MediaFlex
GigaFlex Insert, 2-port
MediaFlex Multimedia Inserts provide optimum flexibility in configuring multimedia
workstation outlets that respond to any present or future network needs. MediaFlex
Multimedia Inserts along with other MediaFlex Inserts allow for easy configuration of
outlets. All inserts are front loaded and easily snapped in and out of the MediaFlex
Plates for easy installation and maintenance.
MediaFlex Multimedia inserts include the following products:
3-Port RCA insert with IDC termination
SVHS insert with IDC termination
and feedthrough
SVGA (DB15) insert with IDC termination
SC Duplex inserts in MM and SM
MediaFlex Multimedia Inserts are available in Angled versions only in order to allow
for proper management of cable bend radius. The inserts are three units high,
therefore two inserts are required to fully populate a Single gang faceplate and four
inserts will fully populate a Double gang faceplate.
AX101878 MediaFlex RCA Insert,
3-port, Angled
Description
Labeling Insert
Grey
Almond
White
Black
RCA Insert
Grey
Almond
White
Black
SVHS Insert
Grey
Almond
White
Black
Description
MDVO Adapter Insert
Grey
Almond
White
Black
Filler Insert
Grey
Almond
White
Black
WESCO # 1-port
Mfg. # WESCO # Mfg. #
1-port2-port2-port
62857505968
62857505969
62857505970
62857505971
AX100978
AX100979
AX100980
AX100981
62857505972
62857505973
62857505974
62857505975
AX100982
AX100983
AX100984
AX100985
62857506004
62857506005
62857506006
62857506007
AX101014
AX101015
AX101016
AX101017
62857506008
62857506009
62857508850
62857506010
AX101018
AX101019
AX101020
AX101021
WESCO #
Mfg. #
62857506000
62857506001
62857506002
62857506003
AX101010
AX101011
AX101012
AX101013
62857505988
62857505989
62857505990
62857505991
AX100998
AX100999
AX101000
AX101001
62857505976
62857505977
62857505978
62857505979
AX100986
AX100987
AX100988
AX100989
These products are in the process of
being assessed for RoHS compliance.
Please check the Belden Web Site for
Description
F Coaxial Insert
Grey
Almond
White
Black
BNC Coaxial Insert
Grey
Almond
White
Black
SC Duplex Insert
Grey
Almond
White
Black
Dual ST Insert
Grey
Almond
White
Black
WESCO #
Mfg. #
62857505984
62857505985
62857505986
62857505987
AX100994
AX100995
AX100996
AX100997
62857505980
62857505981
62857505982
62857505983
AX100990
AX100991
AX100992
AX100993
62857505992
62857505993
62857505994
62857505995
AX101002
AX101003
AX101004
AX101005
62857505996
62857505997
62857505998
62857505999
AX101006
AX101007
AX101008
AX101009
37
Copper Media
Workstation Outlets
MDVO Side Entry Box, 106 / Deco / Modular Furniture Adapters & Multimedia Outlet Box
MDVO Multimedia Outlet Box
A0643205 MDVO Multimedia
Outlet Box, shown here as
terminated
The MDVO Multimedia Outlet Box brings unique versatility for multimedia work
area installations. The box design provides cable management and helps maintain
cable bend radius. The outlet box’s low profile design and side-entry offers better
protection for patch cords. The outlet box can accept up to six EZ-MDVO, GigaFlex
or MDVO Multimedia Modules or three SC Duplex adapters.
The MDVO Multimedia Outlet Box can be mounted directly on the wall or attached
to standard electrical boxes. Included with the MDVO Multimedia box are three SC
Duplex Mounting bezels and three MDVO Adapters.
Multi-User Outlet Box
A0645271 MDVO Side Entry Box,
The Multi-User Outlet Box is a versatile box that can be used in many different
applications. The outlet box can accommodate up to 24 connections of any type,
UTP, fiber or coax. The outlet box is ideal for use as a multi-user telecommunications
assembly, or simply as a high-density multimedia telecommunications outlet. The
Multi-User Outlet Box can also be used as a wall mounted patch panel in confined
areas, such as shallow rooms and cabinets.
Multi-User Adapter Strips
The Multi-User Outlet Box design allows for mixed media installations with a choice
of connection strips. The box can accept either one or two 12-port MDVO Adapter
Strips, PS5E HD Connector Module Strips (BIX or 110), or a combination of both for
a maximum of 24 connections.
AX100311 MDVO 106 Adapter,
4-port, shown here with modules
38
MDVO Adapters
All MDVO Adapters are compatible with GigaFlex, EZ-MDVO and MDVO Multimedia
Modules.
The MDVO Side Entry Box can be easily mounted directly on the wall, as well as on
modular furniture panels, baseboards and utility poles. The compact size of the box
allows secure installation in confined areas such as behind a desk or underneath a
workstation.
A0409654 MDVO Deco Adapter,
The MDVO 106 Adapters are designed for installations using standard NEMA
electrical-style faceplates also referred to as 106-type or duplex wall plates.
AX100925 MDVO Modular
Furniture Adapter, 4-port, shown
here with modules
The MDVO Deco Adapter is designed for installations using Decora style wall plates.
Description
WESCO # MDVO Side Entry Box
2-port, Grey
62857504558
2-port, Almond 62857504559
2-port, White
62857504560
2-port, Black
62857504561
Mfg. #
;
MDVO Modular Furniture Adapters are the ideal outlet adapters for open office
furniture applications.They can be snapped into any standard opening, in modular
furniture settings.
A0645271
A0645272
A0645273
A0645274
Description
WESCO # MDVO Deco Adapter
3-port, Grey
62857504377
3-port, Almond 62857504378
3-port, White
62857504379
3-port, Black
62857504380
Mfg. #
A0409651
A0409652
A0409653
A0409654
Description
WESCO # MDVO Multimedia Outlet Box
6-port, Grey
62857504478
6-port, Almond 62857504479
6-port, White
62857504480
6-port, Black
62857504481
Standard shipping carton of 1 unit.
Mfg. #
A0643205
A0643206
A0643207
A0643208
Copper Media
Workstation Outlets
MDVO Side Entry Box, 106 / Deco / Modular Furniture Adapters & Multimedia Outlet Box
Description
WESCO # Mfg. #
2-port2-port
MDVO 106 Adapter
Grey
62857505423
AX100304
Almond
62857505424
AX100305
White
62857505425
AX100306
Black
62857505426
AX100307
WESCO #
4-port
Mfg. #
4-port
62857505427
62857505428
62857505429
62857505430
AX100308
AX100309
AX100310
AX100311
MDVO Modular Furniture Adapter
Grey
Almond
White
Black
3-port
3-port
4-port
4-port
62857504356
62857504357
62857504358
62857504359
A0407071
A0407072
A0407073
A0407074
62857505915
62857505916
62857505917
62857505918
AX100925
AX100926
AX100927
AX100928
Standard shipping carton of 25 units for the 3-port and 10 units for the 4-port.
MDVO Faceplates Flush and Angled
A0405257 MDVO Faceplate,
1-port
MDVO Faceplate, Flush
MDVO Faceplates flush combine ease of use and aesthetics in work area
installations. The Single gang faceplates are available in 1-port and 8-port
configurations, Double gang faceplates are configured for 12-ports. The Single
gang faceplates can fit over the Interface Surface Adapter Boxes for surface mount
installations.
8-port
12-port
A0645267 MDVO Angled Entry
Faceplate, shown here with
modules
MDVO faceplates are suitable for use with EZ-MDVO and MDVO Multimedia
Modules.
MDVO Angled Entry Faceplate
The MDVO Angled Entry Faceplate offers better patch cord protection than traditional
faceplates and optimizes patch cord bend radius control. The MDVO Angled Entry
Faceplate can accept up to four EZ-MDVO or MDVO Multimedia Modules. The
faceplate can be attached to standard electrical boxes or wall-mounting hardware
for flush-mount installations. The faceplate can also fit over the Interface Surface
Adapter Box for surface mount installations.
WESCO #
Mfg. #
MDVO Faceplate
62857504296
A0405255
62857504297
A0405256
62857504298
A0405257
62857504299
A0405258
62857504312
A0405294
62857504313
A0405295
62857504314
A0405296
62857504315
A0405298
62857504424
A0620806
62857504425
A0620807
62857504426
A0620808
62857504427
A0620809
MDVO Angled Entry Faceplate
62857504554
A0645267
62857504555
A0645268
62857504556
A0645269
62857504557
A0645270
Description
Flush, 1-port, Single Gang, Gray
Flush, 1-port, Single Gang, Almond
Flush, 1-port, Single Gang, White
Flush, 1-port, Single Gang, Black
Flush, 8-port, Single Gang, Gray
Flush, 8-port, Single Gang, Almond
Flush, 8-port, Single Gang, White
Flush, 8-port, Single Gang, Black
Flush, 12-port, Double Gang, Gray
Flush, 12-port, Double Gang, Almond
Flush, 12-port, Double Gang, White
Flush, 12-port, Double Gang, Black
MDVO Angled Entry Faceplate, 4-port, Gray
MDVO Angled Entry Faceplate, 4-port, Almond
MDVO Angled Entry Faceplate, 4-port, White
MDVO Angled Entry Faceplate, 4-port, Black
39
Copper Media
Workstation Outlets
Stainless Steel Faceplate
AX102007 2-port Stainless Steel
SG Faceplate
Keystone-style, shown here with
modules
Stainless Steel Faceplate
Belden’s Stainless Steel Faceplates are ideal for labs, sanitary, medical, and harsh
environment type applications.
They are designed to accept Keystone-style modules. The Stainless Steel Faceplates
are available as Single Gang and Double Gang, and can accept up to 12 modules.
A studded version designed to support a wall phone is also offered. Stainless Steel
Faceplates can be attached to standard NEMA type outlet boxes or wall-mounting
hardware for flush-mount installation. Stainless Steel Faceplates are cULus Listed.
Please note: F
or use only with Keystone-style modules such as GigaFlex PS6+,
GigaFlex PS5E and EZ-MDVO Modules.
AX102012 6-port Stainless Steel
DG Faceplate
Keystone-style, shown here with
modules
Description
Mfg. #
1-Port Stainless Steel SG Faceplate - Keystone-style studded for Phone
AX102005
1-Port Stainless Steel SG Faceplate - Keystone-style
AX102006
AX102007
AX102008
AX102009
AX102010
4-Port Stainless Steel DG Faceplate - Keystone-style
AX102011
AX102012
AX102013
These products are in the process of being assessed for RoHS compliance. Please check our Web Site for
40
MDVO Multimedia Modules
A0407005 MDVO SC Fiber
Module
A0649254 SC Duplex Adapter
A0407010 MDVO ST Compatible
Fiber Module
AX101467 MDVO MTRJ Fiber
Module
MDVO Multimedia Module
MDVO Multimedia Modules address audio/video and fiber applications. Fiber
modules are available for LC Duplex, SC Simplex, ST Compatible multimode
and MT-RJ multimode & single-mode connections. The SC Duplex Adapter is a
fiber adapter sleeve with flanges that mounts into the SC Duplex mounting bezel
(included in the MDVO Multimedia Outlet box). Audio/video modules are available for
SVHS, RCA, BNC and Video F connections.
Description
WESCO #
Mfg. #
ST Compatible, phosphor bronze insert
Grey
62-8575-04346 A0407007
Almond
62-8575-04347 A0407008
White
62-8575-04348 A0407009
Black
62-8575-04349 A0407010
A0406997 MDVO BNC
Coaxial Module
A0406999 MDVO Video
F Coaxial Module
Description
WESCO #
Mfg. #
SC simplex, phosphor bronze insert
Grey 62-8575-04342 A0407003
Almond
62-8575-04343 A0407004
White
62-8575-04344 A0407005
Black
62-8575-04345 A0407006
SC Duplex Adapter, phosphor bronze insert
Almond, (568SC)62857504582 A0649254
MT-RJ
Singlemode,
Almond 62857506435 AX101466
Multimode, Grey 62857506436 AX101467
;
Copper Media
Cables & Modular Cords
MDVO Multimedia Modules (continued)
Description
Coaxial
WESCO #
BNC
Mfg. # BNC
WESCO #
VIDEO F
Mfg. #
VIDEO F
Grey
62857504334
A0406995
62857504338
A0406999
Almond
62857504335
A0406996
62857504339
A0407000
White
62857504336
A0406997
62857504340
A0407001
Black
62857504337
A0406998
62857504341
A0407002
GigaFlex Cat 6+ Modular Cord, Beyond Category 6
AX350061 GigaFlex Cat 6+
Modular Cord
GigaFlex Cat 6+ Modular Cord
The GigaFlex Cat 6+ Modular Cords are 4-pair 23 AWG UTP modular cords
designed for use with the Belden IBDN Systems 2400 and 4800LX, providing
channel bandwidths of 250 MHz and 300 MHz, respectively. The GigaFlex Cat 6+
Modular Cords have been designed to provide a mated-connection performance that
exceeds the Category 6 requirements.
The GigaFlex Cat 6+ Modular Cord’s patented design, with a very small footprint,
makes them fully compatible with any of the highest density hubs with RJ45 jack
connections.
Description
CMR, 4-pair, 24 AWG solid, T568A/B-T568A/B
GigaFlex Cat 6+ Modular Cord
Blue
WESCO #
Mfg. #
White
WESCO #
Mfg. #
Grey
WESCO #
Mfg. #
Green
WESCO #
Mfg. #
Red
WESCO #
Mfg. #
Yellow
WESCO #
Mfg. #
Ordering #
Ordering #
Ordering #
0.6 m (2 ft.)
62857509118
AX350037
62857509124
AX350043
62857509130
AX350049
62857509136
AX350055
62857509142
AX350061
62857509148
AX350067
1.2 m (4 ft.)2.1 m (7 ft.)
62857509119
62857509120
AX350038
AX350039
62857509125
62857509126
AX350044
AX350045
62857509131
62857509132
AX350050
AX350051
62857509137
62857509138
AX350056
AX350057
62857509143
62857509144
AX350062
AX350063
62857509149
62857509150
AX350068
AX350069
GigaFlex Cat 6+ Modular Cord3.0 m (10 ft.)
4.6 m (15 ft.)
7.6 m (25 ft.)
Blue
White Grey Green
Red
62857509122
AX350041 62857509128
AX350047 62857509134
AX350053 62857509140
AX350059 62857509146
AX350065
62857509152
AX350071
62857509123
AX350042
62857509129
AX350048
62857509135
AX350054
62857509141
AX350060
62857509147
AX350066
62857509153
AX350072
Yellow
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. # WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
62857509121
AX350040 62857509127
AX350046 62857509133
AX350052 62857509139
AX350058 62857509145
AX350064
62857509150
AX350070
< Custom GigaFlex Cat 6+ Modular Cords can be ordered with the following generic code.
41
Copper Media
Cables & Modular Cords
GigaFlex Cat 5E Modular Cord
AX350013 GigaFlex Cat 5E
Modular Cord
The GigaFlex Cat 5E Modular Cords are 4-pair 24 AWG UTP modular cords that are
designed for use with the Belden IBDN Plus Cabling System and the Belden IBDN
System 1200 providing channel bandwidths of 100 MHz and 160 MHz, respectively.
The GigaFlex Cat 5E Modular Cord’s patented design features a very small footprint,
making them fully compatible with the highest density hubs which use RJ45 jack
connections. The GigaFlex Cat 5E Modular Cords have been designed to provide a
mated-connection performance that exceeds the Category 5e standard.
Description
CMR, 4-pair, 24 AWG stranded, T568A/B-T568A/B
Blue WESCO #
Mfg. #
White WESCO #
Mfg. #
Grey WESCO #
Mfg. #
Green WESCO #
Mfg. #
Red WESCO #
Mfg. #
Yellow WESCO #
Mfg. #
42
Mfg. #
0.6 m (2 ft.)
Mfg. #
Mfg. #
1.2 m (4 ft.)2.1 m (7 ft.)
62857509082
AX350001 62857509088
AX350007 62857509094
AX350013 62857509100
AX350019 62857509106
AX350025 62857509112
AX350031 62857509083
AX350002 62857509089
AX350008 62857509095
AX350014 62857509101
AX350020 62857509107
AX350026 62857509113
AX350032 Description
WESCO #
Mfg. #
WESCO #
Mfg. #
GigaFlex Cat 5E Modular Cord: CMR, 4-pair, 24 AWG stranded, T568A/B-T568A/B
3.0 m (10 ft.)
4.6 m (15 ft.)
Blue 62857509085 AX350004 62857509086 AX350005 White 62857509091 AX350010 62857509092 AX350011 Grey 62857509097 AX350016 62857509098 AX350017 Green 62857509103 AX350022 62857509104 AX350023 Red 62857509109 AX350028 62857509110 AX350029 Yellow 62857509115 AX350034 62857509116 AX350035 WESCO #
62857509084
AX350003
62857509090
AX350009
62857509096
AX350015
62857509102
AX350021
62857509108
AX350027
62857509114
AX350033
Mfg. #
7.6 m (25 ft.)
62857509087 AX350006
62857509093 AX350012
62857509099 AX350018
62857509105 AX350024
62857509111 AX350030
62857509117 AX350036
Line Protection and Bonding & Grounding
IDC 4-pair Protector Modules, PVCI Ground Wires, Bond Clamp and Accessories
IDC 4-pair Protector Module
The IDC 4-pair Protector Module is a high-performance Category
5e, solid-state protection for Local Area Networks. Protects sensitive
electronic workstations, network equipment, and cables from damage
caused by transient voltage surges. Provides 100% protection with easyto-install BIX or 110 IDC termination in a convenient 4-pair module.
AX100826 Cat-5e,
4-pair Protector
WESCO #
Mfg. #
Description
62857505874
AX100826
IDC Protector Module, Category 5e, 4-pair, BIX
Protector, 1/pack
Fiber Media
Cable Selection Guide
The Belden line of Optical Fiber Cables represents a
new selection of the best optical fiber cable products
offered by the consolidated resources of the Belden
organization. The unmatched resources of Belden
have now generated a complete line of indoor and
outdoor cable products in tight buffered and loose
tube constructions. This offering now expands the
available applications for Belden optical fiber cable.
Customer Service
Optical Fiber Selection
Color Code Charts
Type
Grade
Fiber Size
(µ)
Link
Length
(m)
Standards
Compliance
Most of our optical fiber cables are available from
stock. Many of these are available off-the-shelf from
distributors. If you have a new or unusual application,
or you cannot find a optical fiber cable in this catalog
section that meets your technical requirements,
contact Technical Support at 1-800-BELDEN-1 for
additional
information.
Data
Rate
(Gb)
Multimode
6
50/125
exceeds
500
TIA/EIA-568-B.3-1
ISO 11801 OM3
10
5
50/125
TIA/EIA-568-B.3-1 300
ISO 11801 OM3
10
Cable Type
Jacket Color
Loose Tube & Outside Plant Cables
Industrial Tray Cables
Tight Buffered Cables
Grades 2,3,4 Grades 5,6 Single-mode
4
50/125
TIA/EIA-568-B.3
600
1
3
62.5/125
TIA/EIA-568-B.3
1,000
1
2
62.5/125
TIA/EIA-568-B.3
550
1
62.5/125
—
FDDI grade†
ITU G.652.c/d††
—
—
—
—
1s
Single-mode —
Jacket Color Chart
Black
Orange
Orange
Aqua
Yellow
Nonstandard jacket colors are available upon request.
s Grade 1 fibers are available upon request.
† Used in most current cable plants, but not recommended for future
installations, except as patch cordage
†† Low water peak fiber with advantages for CWDM applications
43
Fiber Sub-unit Color Code Chart*
Fiber/Tube No.
Color
Fiber/Tube No.
Color
Blue
Orange
Green
Brown
Slate
White
Red
Black
Yellow
Violet
Rose
Aqua
1
2
3
4
5
6
7
8
9
10
11
12
*Per EIA/TIA 598-A
Optical Specifications
Grade:
Glass Type:
Operating Wavelength (nm)
850/1300
2
3
4
5
6
62.5/125µ
62.5/125µ
50/125µ
50/125µ
50/125µ
Single-mode
Enhanced 6
850/1300
850/1300
850/1300
850/1300
1310/1550
Min. OFL1 Bandwidth (MHz-km) 200/500
200/500
500/500
1500/500
3000/500
—
Min. Laser2 Bandwidth (MHz-km) 220/500
385/500
510/500
2000/500
4000/500
—
Max. Attenuation Loose Tube (dB/km)
3.25/1.0
3.25/1.0
3.0/1.0
3.0/1.0
3.0/1.0
0.40/0.30
Max. Attenuation Tight Buffered3 (dB/km)
3.50/1.25
3.50/1.25
3.50/1.25
3.50/1.25
3.50/1.25
0.80/0.50
—/5000
100 Mb Fast Ethernet Min. Link Length (meters S/L4) 300/2000
300/2000
300/2000
300/2000
300/2000
1 Gb Ethernet Min. Link Length (meters S/L4)
500/1000
600/600
10005/600
10005/600
—/5000
35/300
85/300
300/300
500/300
—/10,000
300/550
10 Gb Ethernet Min. Link Length (meters S/L4) 35/300
OFL = Overfilled Launch4S/L = Short wavelength (850 nm) / Long wavelength
(1310 nm)
2
5
Effective Modal Bandwidth, determined by RML or DMD performance specifications
>2000 meters for engineered links
3
6
Max. Attenuation for Tight Buffered, Ribbon, Micro-Loose Tube and Low water peak Single-Mode suitable for CWDM use
Loose Tube Plenum Cables complies with ITU G.652.c/d
1
Fiber Media
FiberExpress Cables
Interconnect Cable — Simplex and Duplex
Tight Buffer — Riser & Plenum Rated
Product Description
Fiber Bundle Detail
Interconnect Cables are designed for low fibercount premises environments. They are small
and very flexible, making them ideal for confined
spaces. Their aesthetic appearance makes
these cables suitable for use in open office
environments. Available in 1 or 2 fibers. One
sub-unit is marked to permit easy identification of
transmit and receive fibers. Length markings to
facilitate installation.
Jacket
2.9 mm
(.114 in.)
900 Micron
Buffered Fiber
5.9 mm
(.233 in.)
SIMPLEX
Description WESCO #
44
Jacket Color
Single-mode
62.5/125 µm
50/125 µm / 1 Gbe
50/125 µm / 10 Gbe
DUPLEX
Mfg. #
Multimode, FX300 62.5 µm
WESCO #
Mfg. #
Multimode, FX600 50 µm
WESCO #
Mfg. #
Yellow
Orange
Orange
Aqua
WESCO #
Multimode, FX2000 50 µm - Singlemode
9/125 µm
Mfg. #
Interconnect Riser Series, UL OFNR/CSA FT4
1 fiber 62857501722
M9B001 62857501635 M9A001 62857509920
M9C001 62857509920 M93001
2 fibers 62857501723 M9B002 62857501636 M9A002 62857509919
M9C002 62857509477 M93002
Interconnect Plenum Series, UL OFNP/CSA FT6
1 fiber
62857501724
M9B003 62857501637 M9A003 628575104345 M9C003 62857509475 M93003
2 fibers
62857501725 M9B004 62857501638 M9A004 628575104352 M9C004 62857509476 M93004
Fiber Media
FiberExpress Cables
Distribution Cable
Tight Buffer — Indoor Riser, Plenum
Fiber Bundle Detail
Aramid Strength
Member
Product Description
Outer Jacket
Overall Polyester
Tape Barrier
Color
Coded
Jacket
Specified Fiber
(Color Coded)
2 – 12 FIBERS
Upjacketed
Central Strength
Member
Bundles of up to
12 Fibers Each
>12 – 144 FIBERS
Description
Ordering #
Ordering #
Multimode, FX300
62.5 µm
Distribution Riser Series, UL OFNR/CSA FT4
2 fibers
WESCO #
62857501742
Mfg. #
M9B037 4 fibers WESCO #
62857501743
Mfg. #
M9B038 6 fibers
WESCO #
62857501744
Mfg. #
M9B039 8 fibers
WESCO #
62857501745
Mfg. #
62857501747
Mfg. #
62857501786
Mfg. #
62857501787
Mfg. #
62857501788
Mfg. #
62857501789
Mfg. #
62857501794
Mfg. #
M9B619 Distribution Plenum Series, UL OFNP/CSA FT6
2 fibers
WESCO #
62857501748
Mfg. #
62857501749
Mfg. #
62857501750
Mfg. #
62857501751
Mfg. #
M9B046 12 fibers
WESCO #
62857501752
Mfg. #
M9B048 24 fibers
WESCO #
62857501791
Mfg. #
62857501792
Mfg. #
62857501793
Mfg. #
62857501795
Mfg. #
62857501796
Mfg. #
M9B621 Flexible thermoplastic jacket provides excellent
handling characteristics. Fibers and cable subunits are color coded for easy identification.
Length markings in meters for easy determination
of cable length. Full dielectric construction, no
grounding required. For Riser offering, MSHA
approved cables are available.
Jacket Color
Single-mode
Yellow
62.5/125 µm
Orange (Green for LSZH only)
50/125 µm / 1 Gbe
Orange
50/125 µm / 10 Gbe
Aqua
Ordering #
Multimode, FX600
50 µm
Ordering #
Multimode, FX2000
50 µm -
Singlemode
62857501655
M9A037 62857501656
M9A038 62857501657
M9A039 62857501658
M9A040 62857501660
M9A042 62857501695
M9A602 62857501696
M9A604 62857501697
M9A606 6285750168
M9A609 62857501703
M9A619 62857510093
M9C037 628575104505
M9C038 62857509827
M9C039 62857509909
M9C040 62857509828
M9C042 62857510175
M9C602 628575104765
M9C604 628575104772
M9C606 62857510177
M9C609 628575104819
M9C619 62857509546
M93037
62857509547
M93038
62857509470
M93039
62857509548
M93040
62857509472
M93042
62857509553
M93602
62857509554
M93604
Call
M93606
62857509555
M93609
62857509550
M93619
62857501661
M9A043 62857501662
M9A044 62857501663
M9A045 62857501664
M9A046 62857501665
M9A048
62857501700
M9A612 62857501701
M9A614 62857501702
M9A616 62857501704
M9A620
62857501705
M9A621 62857509913
M9C043
628575104512
M9C044 62857509911
M9C045 628575104529
M9C046 62857509705
M9C048 628575104789
M9C612 628575104796
M9C614 62857509470
M9C616 628575104826
M9C620 628575104833
M9C621 62857509540
M93043
62857509474
M93044
62857509541
M93045
62857509542
M93046
62857509543
M93048
62857509544
M93612
62857501599
M93614
62857501600
M93616
62857509246
M93620
Call
M93621
45
Fiber Media
FiberExpress Cables
Breakout Style Cable
Tight Buffer — Indoor Riser, Plenum
Product Description
Fiber Bundle Detail
Outer Jacket
Color Coded
Thermoplastic Jacket
Aramid
Strength
Member
900 micron
Tight Buffered
Fiber
46
Central Strength
Member
2.0 mm Sub-units
Full dielectric construction, no grounding required.
Available with 2 to 36 fibers. Fiber subunits
are color coded for easy identification. Length
markings in meters for easy determination of cable
length. For Riser offering, MSHA approved cables
are available.
Jacket Color
Single-mode
Yellow
62.5/125 µm
Orange (Green for LSZH only)
50/125 µm / 1 Gbe
Orange
50/125 µm / 10 Gbe
Aqua
Description WESCO #
Mfg. #
WESCO #
Mfg. #
Multimode, FX300
Multimode, FX600
62.5 µm
50 µm
Breakout Riser Series, UL OFNR/CSA FT4
2 fibers
62857501726 M9B005 62857501639 M9A005
4 fibers 62857501727 M9B006 62857501640 M9A006 6 fibers 62857501728 M9B007 62857501641 M9A007
8 fibers 62857501729 M9B008 62857501642 M9A008
12 fibers 62857501731 M9B010 62857501644 M9A010
18 fibers 62857501732 M9B011 62857501645 M9A011
24 fibers 62857501733 M9B012 62857501646 M9A012 36 fibers 62857501757 M9B083 62857501667 M9A083 Breakout Plenum Series, UL OFNP/CSA FT6
2 fibers 62857501734 M9B013 62857501647 M9A013
4 fibers 62857501735 M9B014 62857501648 M9A014 6 fibers 62857501736 M9B015 62857501649 M9A015 8 fibers 62857501737 M9B016 62857501650 M9A016 12 fibers 62857501739 M9B018 62857501652 M9A018 18 fibers 62857501740 M9B019 62857501653 M9A019 24 fibers 62857501741 M9B020 62857501654 M9A020 36 fibers 62857501756 M9B082 62857501666 M9A082 WESCO #
Mfg. # Multimode, FX2000
50 µm -
WESCO #
Singlemode
Mfg. #
628575104369
628575104376
628575104383
628575104390
628575104406
628575104413
628575104420
628575104567
M9C005 M9C006 M9C007 M9C008 M9C010 M9C011 M9C012 M9C083 62857509488
62857509489
62857509490
62857509491
62857509492
62857509493
62857509494
62857509496
M93005
M93006
M93007
M93008
M93010
M93011
M93012
M93083
628575104437
628575104444
628575104451
628575104468
628575104475
628575104482
628575104499
628575104550
M9C013 M9C014 M9C015 M9C016 M9C018 M9C019 M9C020 M9C082 62857509478
62857509479
62857509480
62857509481
62857509484
62857509485
62857509486
62857509487
M93013
M93014
M93015
M93016
M93018
M93019
M93020
M93082
Loose Tube (Campus) Series
Single Jacket, All Dielectric Cable
Outdoor, and Indoor/Outdoor Riser Rated
Fiber Bundle Detail
Outer Jacket
Waterblocking
Tape
Thermoplastic
Tube
Moisture
Blocking
Gel
Multiple
250 micron
Fibers
Central E-Glass
Strength Member
Fiber
Bundles
Aramid Strength
Members
;
Gel-filled buffer tube prevents water migration. All-dielectric strength
member. Available as Riser rated cable, thereby eliminating the
need for service entrance splicing to in-building cable. Full dielectric
construction, no grounding required. Available with up to 216 fibers.
Length markings in meters for easy determination of cable length.
Single Jacket, All Dielectric Cable
Indoor/Outdoor Plenum Rated
Dry waterblocking technology used within tubes and under jacket.
Available as Plenum rated cable, thereby eliminating the need for
service entrance splicing to in-building cable. Small diameter and
bend radius facilitate installation in tight spaces. Full dielectric
construction, no grounding required. Available with up to 144 fibers.
Fibers grouped into sets of 12 for maximum density. Length markings
in meters for easy determination of cable length.
Fiber Media
FiberExpress Cables
Loose Tube (Campus) Series (continued)
Belden Part Number
No. of Fibres
Fibres per tube
62.5/125um
50/125um 1GBe
50/125um 10 Gbe
- 300m
Singlemode
Outdoor Loose Tube series
6
6
M9B510T
M9A510T
M9C510T
M9W510T
12
6
M9B511T
M9A511T
M9C511T
M9W511T
24
6
M9B500T
M9A500T
M9C500T
M9W500T
36
6
M9B502T
M9A502T
M9C502T
M9W502T
48
12
M9B505T
M9A505T
M9C505T
M9W505T
72
12
M9B507T
M9A507T
M9C507T
M9W507T
96
12
M9B513T
M9A513T
M9C513T
M9W513T
144
12
M9B509T
M9A509T
M9C509T
M9W509T
216
12
M9B520T
M9A520T
M9C520T
M9W520T
Indoor/Outdoor Plenum Rated OFNP Loose Tube
6
6
M9B202
M9A202
M9C202
M9W202
12
6
M9B204
M9A204
M9C204
M9W204
24
6
M9B205
M9A205
M9C205
M9W205
36
6
M9B206
M9A206
M9C206
M9W206
48
12
M9B207
M9A207
M9C207
M9W207
72
12
M9B209
M9A209
M9C209
M9W209
96
12
M9B211
M9A211
M9C211
M9W211
144
12
M9B215
M9A215
M9C215
M9W215
No.of Fibers WESCO # Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
Multimode, FX300
Multimode, FX600
Multimode, FX2000
62.5 µm
50 µm
50 µm -
WESCO #
47
Mfg. #
Singlemode
Loose Tube (Campus) Indoor/Outdoor Riser Series, UL, UV Rated, all dielectric, OFNR/CSA FT4
6
62857501797 M9B810 62857501706 M9A810 62857510484
M9C810 62857512954 M9W810
12 62857501798 M9B811 62857501707 M9A811 62857510485
M9C811 62857513166 M9W811
24 62857501799 M9B812 62857501708 M9A812 62857510486
M9C812 62857512815 M9W812
36 62857501800 M9B813 62857501709 M9A813 62857510487
M9C813 62857513010 M9W813
48 62857501801 M9B814 62857501710 M9A814
62857510488
M9C814 62857512816 M9W814
72 62857501802 M9B815 62857501711 M9A815 62857510489
M9C815 62857513011 M9W815
96 62857501803 M9B816 62857501712 M9A816 62857510490
M9C816 62857513192 M9W816
144 62857501804 M9B817 62857501713 M9A817 62857510491
M9C817 62857513193 M9W817
Fiber Media
FiberExpress Connectors
FiberExpress Connectors
Optimax® Field Installable Connectors and Installation Tool Kits
AX101982 Optimax LC Connector
Optimax Field Installable Connector
AX100029 with AX101794
Optimax SC Connector
The Optimax Connectors are reliable field installable optical fiber connectors that are
easy to install. They do not require epoxy, curing or polishing. Their unique design
incorporates a factory polished fiber stub in a splice mechanism which provides a
fast, secure, and reliable termination on optical fiber cables. All critical steps are
performed in the factory, ensuring a superior-quality connection every time. Only
simple tools are required for installation, making Optimax a cost effective field
termination.
A0408835 with AX101793
Optimax ST Compatible
Connector
AX100947 Optimax Tool Kit
Optimax Connectors are high-quality LC, SC and ST Compatible connectors that
use a ceramic ferrule with a physical contact (PC) polish for Multimode and super
physical contact (SPC) polish for Single-mode that ensures the best possible mating
of optical fibers. Connectors are available for 62.5 or 50/125 µm Multimode fiber and
Single-mode fiber installations.
Optimax Enhanced Installation Tool Kit
The Optimax Enhanced Installation Tool Kit is packaged in a small convenient
carrying case and includes an Optimax LC, SC and ST Compatible installation and
training video, installation instructions and all the tools required to terminate 900 µm
buffered optical fiber and jacketed optical fiber.
48
The Optimax Enhanced Installation Tool Kit has all the tools and supplies required
to install both the Optimax LC, SC or ST Compatible Multimode and Single-mode
connectors. Certain tool kit items can be purchased separately to accommodate
installers already possessing basic optical fiber installation tools.
WESCO #
62857511801
62857511802
62857511803
62857505231
62857506059
62857509963
62857504374
Mfg.#
AX101981
AX101982
AX101983
AX100029
AX101077
AX101792
A0408835
Description
Optimax LC Connector, Multimode 62.5, 900 micron
Optimax LC Connector, Multimode 50, 900 micron
Optimax LC Connector, Singlemode, 900 micron
Optimax Field Installable Connector, SC 62.5 µm, Multimode, for 900 µm buffered fiber only
Optimax Field Installable Connector, SC 50 µm, Multimode, for 900 µm buffered fiber only
Optimax Field Installable Connector, SC, Singlemode, for 900 µm buffered fiber only
Optimax Field Installable Connector, ST Compatible 62.5 µm, Multimode, for 900 µm buffered
fiber only
Optimax Field Installable Connector, ST Compatible 50 µm, Multimode, for 900 µm buffered fiber
only
Optimax Field Installable Connector, ST Compatible, Singlemode, for 900 µm buffered fiber only
Optimax LC Connector accessory kit for 2 mm
Optimax Field Installable Connector, SC Accessory Kit for jacketed fiber, contains 3 mm boot,
crimp sleeves and a cord adapter
Optimax Field Installable Connector, ST Accessory Kit for jacketed fiber, contains 3 mm boot,
crimp sleeves
62857506057
AX101075
62857509962
62857511804
62857509965
AX101791
AX101984
AX101794
62857509964
AX101793
62857573942
AX103142
62857505939
62857512741
AX100949
AX102061
LC/SC/ST Compatible (includes installation tools, fiber cleaver, crimping tool, instruction manual,
microscope, tweezers, alcohol wipes, marker, scissors, waste bottle,Universal fiber/cable stripper,
and Training Video)
Optimax Tool Kit, Basic (excludes fiber stripper & clEAver)
OPTIMAX LC Upgrade Kit
62857504371
62857512742
62857504259
62857505907
62857512743
62857599005
62857599006
62857504263
A0408829
AX102062
A0403634
AX100910
AX102063
PX101317
PX101318
A0403641
Optimax Individual Components, Fiber ClEAver
OPTIMAX LC Inst. Tool
Optimax Individual Components, Installation Tools ST Compatible and SC (includes tool-clamp)
Optimax Individual Components, Microscope
OPTIMAX LC Inst. Manual
OPTIMAX ST Inst. Manual
OPTIMAX SC Inst. Manual
Optimax Individual Components, Crimp Tool complete with die
Fiber Media
FiberExpress Preconnectorized Assemblies
FiberExpress Patch Cords
Pre-Connectorized Assemblies
AX200057 Patch Cord Multimode
SC Duplex (568SC)
FiberExpress Patch Cords
FiberExpress Duplex Patch Cord Assemblies are of the highest quality available.
They are assembled and 100% optically tested in our factory prior to shipment.
All patch cords are built with high-quality connectors and cables which guarantees
superior performance and excellent reliability.
DUPLEX PATCH CORDS
ST - ST
2 m ( 6 ft )
3 m ( 10 ft )
5 m ( 16 ft )
SC - SC
2 m ( 6 ft )
3 m ( 10 ft )
5 m ( 16 ft )
LC - LC
2 m ( 6 ft )
3 m ( 10 ft )
5 m ( 16 ft )
MTRJ - MTRJ
2 m ( 6 ft )
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
62857503553
70102419
62857503554
70102420
62857503575
70102447
62857506886
AX200341
62857506886
AX200459
62857506958
AX200413
62857511344
AX200799
62857511312
AX200795
62857511345
AX200800
62857506636
AX200090
62857506637
AX200091
62857506638
AX200092
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
62857506602
AX200056
62857506603
AX200057
62857506604
AX200058
62857506630
AX200084
62857506628
AX200082
62857506825
AX200280
62857510019
AX200603
62857509967
AX200589
62857510084
AX200624
62857506640
AX200094
62857506641
AX200095
62857506642
AX200096
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
62857509645
AX200517
62857509646
AX200518
62857509647
AX200519
62857509655
AX200527
62857509656
AX200528
62857509657
AX200529
62857510335
AX200664
62857510336
AX200665
62857510337
AX200666
62857509635
AX200507
62857509636
AX200508
62857509637
AX200509
62857506102
AX101122
62857506103
AX101123
62857506105
AX101125
Multimode
FX300, 62.5 um
62857506119
AX101139
62857506118
AX101138
62857506117
AX101137
Multimode
FX600, 50 um
62857511346
AX200801
62857511347
AX200802
62857511348
AX200803
Multimode
FX2000, 50 um
62857506137
AX101157
62857506136
AX101156
62857506135
AX101155
Singlemode
62857506606
AX200060
62857510763
AX200699
62857509914
AX200580
62857506113
AX101133
62857506108
AX101128
Multimode
FX300, 62.5 um
62857502927
70100390
62857503252
70101714
62857510328
AX200657
62857506347
AX101366
62857506741
AX200196
62857510698
AX200695
62857509915
AX200581
62857506131
AX101151
62857506123
AX101143
Multimode
FX600, 50 um
62857507002
AX200458
62857506737
AX200192
62857510329
AX200658
62857506348
AX101367
62857511607
AX200900
62857511392
AX200809
62857510339
AX200668
62857511393
AX200810
62857511324
AX200797
Multimode
FX2000, 50 um
62857511394
AX200811
62857510324
AX200653
62857510331
AX200660
62857511395
AX200812
62857506965
AX200421
62857510762
AX200698
62857510338
AX200667
62857506146
AX101166
62857506141
AX101161
Singlemode
WESCO #
Mfg. #
3 m ( 10 ft )
WESCO #
Mfg. #
5 m ( 16 ft )
WESCO #
Mfg. #
HYBRID PATCH CORDS
all 3 m ( 10 ft )
SC - ST
WESCO #
Mfg. #
LC - ST
WESCO #
Mfg. #
LC - SC
WESCO #
Mfg. #
MTRJ - ST
WESCO #
Mfg. #
MTRJ - SC
WESCO #
Mfg. #
SINGLE ENDED (PIGTAILS)
ST - OPEN
2 m ( 6 ft )
SC - OPEN
2 m ( 6 ft )
LC - OPEN
2 m ( 6 ft )
MTRJ - OPEN
3 m ( 10 ft )
Multimode
Multimode
Multimode
Singlemode
FX300, 62.5 um FX600, 50 um FX2000, 50 um
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
62857506643
AX200097
62857506644
AX200098
62857510330
AX200659
62857506349
AX101368
49
Fiber Media
FiberExpress Preconnectorized Assemblies
FiberExpress Secure/Keyed LC System
AX102197 Secure/Keyed LC
Optimax
Secure/Keyed LC System
Optimax Field Installable Connectors and Patch Cords & Pigtails
The FiberExpress Secure/Keyed LC System allows for physical segregation of
networks segments in secure fiber cabling infrastructures. All Secure/Keyed LC
products are available with 6 different keying options each carrying a different color
to facilitate network administration. The keying detail inside the connector is totally
tamper-resistant and cannot be re-produced inside a standard LC connector to
violate the network security. All products comply with the FOCIS 10 standard and
optical performance exceeds all industry standards for SFF connectors.
The Secure/Keyed LC Optimax field installable connectors are available in
Multimode 50 µm laser-optimized and 62.5 µm fiber versions. They are highquality connectors that use a ceramic ferrule with a physical contact (PC) polish for
Multimode connectors.
The Secure/Keyed LC Patch Cords and Pigtails are offered in Multimode 62.5 µm
(FX300), 50/125 µm (FX600) and laser-optimized 50/125 µm (FX2000) for the most
demanding network performance.
Belden Part Number
Description
K1, Red
K2, Green
K3, Yellow K4, Black
K5, Orange K6, Blue
Multimode 62.5 µm**
AX102203
AX102204
AX102205
AX102206
AX102207
AX102208
Multimode 50 µm**
AX102197
AX102198
AX102199
AX102200
AX102201
AX102202
Secure/Keyed LC Optimax*
**For 900 µm buffered fiber only. The same accessory kit (AX101984) is used for 2 mm jacketed cable connector termination as for
our regular Optimax LC offering.
Secure/Keyed LC Duplex Patch Cord, KEYx-KEYx*
50
2 m (6 ft.), Multimode FX300, 62.5 µm
AX201365
AX201366
AX201367
AX201368
AX201369
AX201370
2 m (6 ft.), Multimode FX600, 50 µm
AX201383
AX201384
AX201385
AX201386
AX201387
AX201388
AX201401
AX201402
AX201403
AX201404
AX201405
AX201406
AX201371
AX201372
AX201373
AX201374
AX201375
AX201376
AX201389
AX201390
AX201391
AX201392
AX201393
AX201394
AX201407
AX201408
AX201409
AX201410
AX201411
AX201412
AX201377
AX201378
AX201379
AX201380
AX201381
AX201382
AX201395
AX201396
AX201397
AX201398
AX201399
AX201400
AX201413
AX201414
AX201415
AX201416
AX201417
AX201418
Secure/Keyed LC Duplex Hybrid Patch Cord, KEYx-LCD*
AX201419
AX201420
AX201421
AX201422
AX201423
AX201424
AX201437
AX201438
AX201439
AX201440
AX201441
AX201442
AX201455
AX201456
AX201457
AX201458
AX201459
AX201460
AX201425
AX201426
AX201427
AX201428
AX201429
AX201430
AX201443
AX201444
AX201445
AX201446
AX201447
AX201448
AX201461
AX201462
AX201463
AX201464
AX201465
AX201466
AX201431
AX201432
AX201433
AX201434
AX201435
AX201436
AX201449
AX201450
AX201451
AX201452
AX201453
AX201454
AX201467
AX201468
AX201469
AX201470
AX201471
AX201472
Secure/Keyed LC Duplex Hybrid Patch Cord, KEYx-SCD*
AX201473
AX201474
AX201475
AX201476
AX201477
AX201478
AX201491
AX201492
AX201493
AX201494
AX201495
AX201496
AX201509
AX201510
AX201511
AX201512
AX201513
AX201514
AX201479
AX201480
AX201481
AX201482
AX201483
AX201484
AX201497
AX201498
AX201499
AX201500
AX201501
AX201502
AX201515
AX201516
AX201517
AX201518
AX201519
AX201520
AX201485
AX201486
AX201487
AX201488
AX201489
AX201490
AX201503
AX201504
AX201505
AX201506
AX201507
AX201508
AX201521
AX201522
AX201523
AX201524
AX201525
AX201526
AX201527
AX201528
AX201529
AX201530
AX201531
AX201532
AX201533
AX201534
AX201535
AX201536
AX201537
AX201538
Secure/Keyed LC Pigtail, KEYx-open*
AX201539
AX201540
AX201541
AX201542 AX201543
AX201544
Other Patch Cord colours, lengths and configurations may be available, please contact Customer Service for more details.
These products are in the process of being assessed for RoHS compliance. Please check our Web Site for the
most current RoHS status.* Patent Pending.
Fiber Media
Adapter Modules, Adapter Strips and FiberExpress Manager Modules
AX102098 Secure/Keyed LC Adapter Module
AX102124 Secure/Keyed LC Adapter Strip
AX102114 Secure/Keyed LC
FiberExpress Manager Module
The FiberExpress Secure/Keyed LC System allows for physical
segregation of networks segments in secure fiber cabling
infrastructures. All Secure/Keyed LC products are available with 6
different keying options each carrying a different color to facilitate
network administration. The keying detail inside the connector is
totally tamper-resistant and cannot be re-produced inside a standard
LC connector to violate the network security. All products comply with
the FOCIS 10 standard and optical performance exceeds all industry
standards for SFF connectors.
The Secure/Keyed LC Adapter Modules and Adapter Strips can be
used in all mounting hardware for workstation area, Consolidation
Point or Telecom Room applications.
The Secure/Keyed LC FiberExpress Manager Modules can be used
in 19 and 23 inch FiberExpress Manager Shelves to provide a highdensity management system of up to 1920 terminated fibers per rack.
51
Description
Belden Part Number
K1, Red
Secure/Keyed LC Adapter Module*
K2, Green
K3, Yellow
K4, Black
K5, Orange
K6, Blue
Gray holder
AX102089
AX102090
AX102091
AX102092
AX102093
AX102094
Almond holder
AX102095
AX102096
AX102097
AX102098
AX102099
AX102100
White holder
AX102101
AX102102
AX102103
AX102104
AX102105
AX102106
Black holder
AX102107
AX102108
AX102109
AX102110
AX102111
AX102112
Secure/Keyed LC FiberExpress Adapter Strip*
12 fibers
AX102119
AX102120
AX102121
AX102122
AX102123
AX102124
24 fibers
AX102125
AX102126
AX102127
AX102128
AX102129
AX102130
Secure/Keyed LC FiberExpress Manager Module*
12 fibers
AX102113
AX102114
AX102115
AX102116
AX102117
AX102118
24 fibers AX102310
AX102311
AX102312
AX102313
AX102314
AX102315
* Patent Pending.
These products are in the process of being assessed for RoHS compliance. Please check our Web Site for the most current RoHS status.
Fiber Media
Fiberexpress Manager
FiberExpress Manager & Accessories
AX100934 FiberExpress
Manager Shelf
FiberExpress Manager Shelf
FiberExpress modules are rack-mounted using FiberExpress Manager Shelves. The
shelves provide the total system with extra high connection density while facilitating
cable routing and patch cord management. For 19- or 23-inch rack: 19 in. shelf holds
up to 12 modules; 23 in. shelf holds up to 16 modules.
FiberExpress Manager 1U
AX101943 FiberExpress Manager
1U Rack Mount Patch Panel
The FiberExpress Manager 1U Rack Mount Patch Panel is a low-cost, compact
assembly designed for interconnection or splicing of optical fiber cables, using up to
three FiberExpress Manager Modules. The low-profile design minimizes rack space
to only 45 mm (1.75 in.). An optional FiberExpress Manager 1U Cable Management
Accessory is also available.
FiberExpress Manager Connector Module
The Connector Module is the basic building block of the FiberExpress Manager. It is
designed with a unique release mechanism that allows it to slide from the shelf like a
PC card, easing management of patch cords.
AX102032 FiberExpress Manager
1U Cable Management Accessory
52
AX101525 Connector Module
Pre-terminated MPO-MT-RJ
WESCO #
Mfg.#
Description
62857511718
AX101943
FiberExpress Manager 1U Rack MountPatch Panel, Black For
3 Connector Modules
62857512529
AX102032
FiberExpress Manager 1U Rack MountPatch Panel Cable
ManagementAccessory, Black
Description
FiberExpress Manager Shelf
Black, 23 in.
Black, 19 in. FiberExpress Manager Connector Module
ST type, Metal Sleeve, Multimode, 6 fibers
ST type, Zirconia Ceramic, Singlemode, 6 fibers
ST type, Metal Sleeve, Multimode, 12 fibers
ST type, Zirconia Ceramic, Singlemode, 12 fibers
MPO(m)-ST type, Multimode 62.5 µm, 6 pre-terminated
MPO(m)-ST type, Multimode 50 µm, 6 pre-terminated
MPO(m)-ST type, Singlemode, 6 pre-terminated
MPO(m)-ST type, Multimode 62.5 µm, 12 pre-terminated
MPO(m)-ST type, Multimode 50 µm, 12 pre-terminated
MPO(m)-ST type, Singlemode, 12 pre-terminated
SC Simplex, Zirconia Ceramic, Singlemode, 6 fibers
SC Duplex, Metal Sleeve, Multimode, 6 fibers
SC Duplex, Zirconia Ceramic, Singlemode, 6 fibers
SC Duplex, Metal Sleeve, Multimode, 8 fibers
SC Duplex, Zirconia Ceramic, Singlemode, 8 fibers
SC Duplex (ST in), Metal Sleeve, Multimode, 12 fibers
SC Duplex (ST in), Zirconia Ceramic, Singlemode, 12 fibers
MPO(m)-SC Duplex, Multimode 62.5 µm, 6 pre-terminated
MPO(m)-SC Duplex, Multimode 50 µm, 6 pre-terminated
MPO(m)-SC Duplex, Singlemode, 6 pre-terminated
MPO(m)-SC Duplex, Multimode 62.5 Micron, 8 pre-terminated
MPO(m)-SC Duplex, Multimode 50 Micron, 8 pre-terminated
MPO(m)-SC Duplex, Multimode 62.5 µm, 12 pre-terminated
;
WESCO #
Mfg. #
62857505925
62857506067
AX100935
AX101085
62857506069
62857505926
62857506167
62857506166
62857506418
62857506419
62857506420
62857506169
62857506170
62857506168
62857505933
62857506072
62857505934
62857506474
62857506473
62857506100
62857506099
62857506422
62857506423
62857506421
62857506475
62857506476
62857506477
62857506071
AX101089
AX100936
AX101187
AX101186
AX101449
AX101450
AX101451
AX101189
AX101190
AX101188
AX100943
AX101092
AX100944
AX101513
AX101512
AX101120
AX101119
AX101453
AX101454
AX101452
AX101514
AX101515
AX101516
AX101091
Fiber Media
FiberExpress Manager
FiberExpress Manager & Accessories (continued)
Description
WESCO #
Mfg. #
MPO(m)-SC Duplex, Multimode 50 µm, 12 pre-terminated
62857506094
AX101114
62857506170
AX101090
MT-RJ, Beige, Multimode, 12 fibers
62857506076
AX101096
MT-RJ, Blue, Singlemode, 12 fibers
62857506540
AX101581
MPO(m)-MT-RJ(m), Multimode 62.5 Micron, 12 pre-terminated
62857506484
AX101525
MPO(m)-MT-RJ(m), Multimode 50 Micron, 12 pre-terminated
62857506485
AX101526
MPO(m)-MT-RJ(m), Singlemode, 12 pre-terminated
62857506483
AX101524
LC, Metal Sleeve, Multimode, 8 fibers
62857506553
AX101621
LC, Zirconia Ceramic, Singlemode, 8 fibers
62857506552
AX101620
LC, Metal Sleeve, Multimode, 12 fibers
62857506487
AX101528
LC, Zirconia Ceramic, Singlemode, 12 fibers
62857506486
AX101527
MPO(m)-LC, Multimode 62.5 Micron, 8 pre-terminated
62857506555
AX101623
MPO(m)-LC, Multimode 50 Micron, 8 pre-terminated
62857506556
AX101624
MPO(m)-LC, Singlemode, 8 pre-terminated
62857506554
AX101622
MPO(m)-LC, Multimode 62.5 Micron, 12 pre-terminated
62857506489
AX101530
MPO(m)-LC, Multimode 50 Micron, 12 pre-terminated
62857506490
AX101531
MPO(m)-LC, Singlemode, 12 pre-terminated
62857506488
AX101529
FC, Zirconia Ceramic, Singlemode, 6 fibers
62857505927
AX100937
FC, Zirconia Ceramic, Singlemode/Multimode, 8 fibers
62857506447
AX101482
MPO(m)-FC, Multimode 62.5 Micron, 8 pre-terminated
62857506544
AX101587
MPO(m)-FC, Multimode 50 Micron, 8 pre-terminated
62857506545
AX101588
MPO(m)-FC, Singlemode, 8 pre-terminated
62857506543
AX101586
Flex Kit, contains tubes and manifolds to split cables into 6 fibers, required for loose tube
cables or cables that don’t have a 6 fiber modularity (6 fibers per sub-unit),one kit per
12 modules (one 19 in. shelf)
62857505935
AX100945
Splice Holder Kit, contains 4 splice holders, each holding up to 6 splices:
fusion or mechanical
62857506078
AX101098
Ground Kit
62857506079
AX101099
FiberExpress Manager Connector Module
FiberExpress Manager Accessories
53
Fiber Media
FiberExpress Patch Panels
FiberExpress Rack Mount Patch Panel 1U and 2U
AX100041 FiberExpress, 12/24
Port (1U) Rack Mount Patch
Panel
Port (2U) Rack Mount Patch Panel
The FiberExpress 1U and 2U Rack Mount Patch Panels are equipped with a special
hinge that allows easy access to the rear of the patch panel without disturbing the
optical fiber cable. A specially designed front panel allows connector protection
and easy routing of optical fiber patch cords. The FiberExpress Rack Mount
Patch Panels are also compatible with our 203 mm (8 in.) Splice Organizer Trays.
This allows the optical fiber cable to be either terminated with fiber single-ended
patch cords or field-installable connectors. The patch panels can be used with ST
Compatible, SC, 568SC, FC, LC or MT-RJ adapters strips (ordered separately).
The FiberExpress 1U Rack Mount Patch Panel is a low-cost, compact assembly
designed for interconnection or splicing of optical fiber cables, from 12 up to 48
fibers if MT-RJ or LC double density adapter strips are used. The low-profile design
minimizes rack space to only 45 mm (1.75 in.). An optional smoked Plexiglass front
cover is also available.
The FiberExpress 2U Rack Mount Patch Panel offers a high fiber capacity, 96 fibers
if using double density MT-RJ or LC adapter strips. The FiberExpress 2U comes
equipped with a smoked Plexiglass front cover that protects fiber connections while
allowing for quick visual inspection.
FiberExpress Rack Mount Patch Panel 3U
AX100078 FiberExpress (3U)
Rack Mount Patch Panel
54
The FiberExpress 3U Rack Mount Patch Panel can accommodate up to 96 optical
fiber connections using MT-RJ or LC connectors. The connector panel is mounted
on a sliding drawer for easy access to the back side (cable side) of the panel. The
FiberExpress 3U Rack Mount Patch Panel can be used with either optical fiber
single-ended patch cords or field-installable connectors. If optical single-ended patch
cords are to be used, organizer trays are easily accessible via the removable front
access pull-out drawer. (Trays must be
ordered separately.)
The FiberExpress 3U Rack Mount Patch Panel is a compact cross-connect assembly
for the termination of optical fiber cables. The low-profile design minimizes required
rack space to 127 mm (5 in.). It is compatible with ST Compatible, SC, 568SC, MTRJ, LC and FC adapters strips (ordered separately).
Port (4U) Rack Mount Patch
Panel
FiberExpress Rack Mount Patch Panel 4U
The FiberExpress 4U Rack Mount Patch Panel is an economical solution for the
protection of optical fiber terminations and splices, up to 192 optical fibers if using
MT-RJ or LC connectors. The connector panel, accepting the Universal Adapter
Strips, is located inside the enclosure and swings out (left or right) to give easy
access to the cable and splices.
The FiberExpress 4U Rack Mount Patch Panel is a compact Cross-Connect
enclosure for the crossconnection, interconnection or splicing of optical fiber cables. The low-profile design
minimizes required rack space to 178 mm (7 in.). It can be used with ST Compatible,
SC, 568SC, MT-RJ, LC and FC adapters strips (ordered separately).
Description
WESCO #
Mfg. #
FiberExpress Rack Mount Patch Panel (1U)
Universal Connector Panel
Grey
62857505238 AX100042
Black
62857505237 AX100041
Description
WESCO #
Mfg. #
Grey
62857505265 AX100069
Black
62857505264 AX100068
Description
WESCO #
Mfg. #
Grey 62857505274 AX100078
Black 62857505273 AX100077
Description
WESCO #
Mfg. #
Black 62857505303 AX100116
Grey 62857505302 AX100115
Fiber Media
FiberExpress Wall Mount Fiber Patch Panels
FiberExpress Rack Mount Patch Panels 1U and 2U
Accessories
AX101800 127 mm (5 in.) Universal Offset
Bracket Kit, for 19 in. and 23 in. Racks 1U
AX101802 23 in. Rack Universal Extension
Bracket for 1U and 2U
The accessories provide additional panel mounting flexibility for racks,
cabinets and cable entry.
WESCO #
62857510372
62857510373
62857510370
62857510371
62857510374
62857510375
62857505242
Mfg.#
AX101799
AX101800
AX101797
AX101798
AX101801
AX101802
AX100046
62857505243
AX100047
62857505269
AX100073
62857505270
AX100074
62857505241
AX100045
AX100047 Right Side Cable Entry Bracket for 1U
Description
5 Inch Universal Offset Bracket Kit 1U, Black
5 Inch Universal OffsetB racket Kit 1U, Grey
5 Inch Universal Offset Bracket Kit 2U, Black
5 Inch Universal Offset Bracket Kit 2U, Grey
23 Inch Universal Extens ion Bracket , Black
23 Inch Universal Extens ion Bracket , Grey
FiberExpress Rack Mount Patch Panels (1U)
and (2U) Accessories, Right side cable entry
bracket (1U), Black
bracket (1U), Gray
bracket (2U), Black
bracket (2U), Gray
and (2U) Accessories, Front Cover (1U),
Smoked Plexiglass
FiberExpress Wall Mount Patch Panel
AX100045 Front Cover for 1U
The FiberExpress Wall Mount Patch Panel Series is an economical
solution for the protection of optical fiber terminations and splices in
hostile environments.
Using the FiberExpress Universal Adapter Strips (ordered separately),
the Wall Mount Patch Panels allow for flexible and customized patch
panel design. They are compatible with most industry standard
connections: ST Compatible, SC, 568SC, MT-RJ, LC and FC.
AX100543 Large Wall Mount
Available in gray and black, the FiberExpress Wall Mount Patch
Panels have an ergonomic design, rugged construction and compact
assemblies to effectively protect your optical fiber terminations and
splices.
Description
FiberExpress Wall
Small, Grey
Small, Black
Medium, Grey
Medium, Black
Large, Grey
Large, Black
WESCO #
Mfg. #
Mount Patch Panel
62857505603
AX100496
62857505602
AX100495
62857505638
AX100541
62857505637
AX100540
62857505640
AX100543
62857505639
AX100542
AX100541 Medium Wall Mount
AX100495 Small Wall Mount
55
Fiber Media
Universal Optical Fiber Adapter Strips & Adapter Sleeves
Belden Universal Optical Fiber Adapter Strips are pre-loaded with six (single density) or 12 (double density) of
these two types of adapter sleeves: Phosphor Bronze and Zirconia Ceramic.
Adapter sleeves are used as the connecting interface between two optical fiber connectors. Belden offers two
types of sleeve material: Phosphor Bronze and Zirconia Ceramic. The Zirconia Ceramic sleeve is the preferred
choice for Singlemode connection in the market place because of the following reasons:
• More consistent insertion/withdrawal force
• Better optical performance
• No oxidation in high humidity or salt-laden atmosphere.
Universal Adapter Strips are available for ST Compatible, SC, FC, 568SC (Duplex SC) and MT-RJ connectors. The
MDVO adapter strip can be used with any FiberExpress patch panels and can provide additional cabling flexibility
where any combination of fiber and copper MDVO or GigaFlex modules can be snapped in. The Blank adapter strip
can be used with any FiberExpress patch panels to fill in unused adapter strip openings.
Description
56
Optical Fiber Adapter Strips
Single density, loaded with 6 ST Compatible Adapters
Grey
Black
Single density, loaded with 3 SC Duplex Adapters
Grey
Black
Single density, loaded with 6 SC Simplex Adapters
Grey
Black
Single density, loaded with 6 FC Adapters
Grey
Black
Double density, loaded with 12 ST Compatible Adapters
Grey
Black
Double density, loaded with 6 SC Duplex
Grey
Black
Double density, loaded with 12 SC Simplex Adapters
Grey
Black
Double density, loaded with 12 FC Adapters
Grey
Black
MT-RJ, Single density, loaded with 6 MT-RJ
Grey
Black
MT-RJ, Double density, loaded with 12 MT-RJ
Grey
Black
Optical Fiber Adapter Sleeves
Phosphor Bronze insert, Multimode, ST Compatible, threaded
Phosphor Bronze insert, Multimode, ST Compatible, flanged
Phosphor Bronze insert, Multimode, SC, flanged
Zirconia Ceramic inserts, Singlemode, ST Compatible, threaded
Zirconia Ceramic inserts, Singlemode, SC, flanged
Zirconia Ceramic inserts, Singlemode, FC Adapter, threaded
;
WESCO #
Mfg #
Phosphor Bronze, Multimode WESCO #
Mfg. #
Zirconia Ceramic, Singlemode 62857505284
62857505283
AX100089 AX100088 62857505632
62857505631
AX100535
AX100534
62857505290
62857505289
AX100095 AX100094 62857506379
62857506378
AX101408
AX101407
62857505288
62857505287
AX100093 AX100092 62857505636
62857505635
AX100539
AX100538
62857505286
62857505285
AX100091 AX100090 62857505634
62857505633
AX100537
AX100536
62857505277
62857505276
AX100081 AX100080 62857505626
62857505625
AX100529
AX100528
62857505294
62857505293
AX100099 AX100098 62857506381
62857506380
AX101410
AX101409
62857505281
62857505280
AX100085 AX100084 62857505630
62857505629
AX100533
AX100532
62857505279
62857505278
AX100083 AX100082 62857505628
62857505627
AX100531
AX100530
N/A
N/A
N/A
N/A
62857506096
62857506095
AX101116
AX101115
N/A
N/A
N/A
N/A
62857506098
62857506097
AX101118
AX101117
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
62857504159
62857504160
62857504214
62857599002
62857599001
62857599003
A0372311
A0372312
A0398873
MX100160
MX100159
MX100161
Fiber Media
FiberExpress Accessories
Universal Optical Fiber Adapter Strips & Adapter Sleeves (continued)
Description
WESCO #
Mfg. #
Adapter Strip, MDVO Style Compatible
Capacity 6 MDVO Style module
Grey 62857505654
AX100557
Black 62857505655
AX100558
Blank Strip
Grey
62857505263
AX100067
Black 62857505262
AX100066
Optical Fiber Splice Trays & Field Breakout Kits
The Belden Field Breakout Kit is designed to attach to one tube of a loose-tube cable. Each kit has either six or
twelve 900 µm tubes that hold each of the coated fibers. For each end of the cable, one kit is needed for every
tube. For example, a 12-fiber 62.5 µm cable contains two 6-fiber tubes. This cable would require four kits, two for
each end.
Optical fiber Splice Organizer Kits provide the accessories necessary for installing the FiberExpress Fiber Patch
Panels, as well as other fiber terminals that accommodate the standard Belden organizer tray.
The Fusion Splice Protector consists of a hinged two-part plastic splint which is precoated with an adhesive. It
is applied directly around the fusion splice point, completely protecting the splice from physical and environmental
damage. Fusion Splice Protectors are available in package of 25 and come in three different sizes. Each size is
colour coded to facilitate identification.
The Tube Splitter is a cylindrical tool containing an internal blade that splits protective tubing longitudinally. It
provides a quick, easy access to fibers in protective tubes. The device can be used with loose tube-type and on
jacketed (3 mm) optical cords.
Description
Optical Fiber Field Breakout Kit
6 fibers, 1/pack 12 fibers, 1/pack
Optical Fiber Splice Organizer Kit
Splice kit, tray, 203 mm (8 in.) Splice kit, tray, 305 mm (12 in.) Optical Fiber Splice Tray
Fusion, 203 mm (8 in.) Universal (mechanical or fusion),203 mm (8 in.) Tray cover, 203 mm (8 in.) Fusion, 305 mm (12 in.) Optical Fiber Splice Tray
Universal (mechanical or fusion), 305 mm (12 in.) Tray cover, 305 mm (12 in.) Fusion Splice Protection
250 µm to 250 µm, Yellow, 25/pack 900 µm to 250 µm, Blue, 25/pack 900 µm to 900 µm, Green, 25/pack Tube Splitter
O.D. 2.3 - 2.8 mm, Blue O.D. 2.8 - 3.1 mm, Red WESCO # Mfg. #
62857506080
62857506081
AX101100
AX101101
62857504583
62857504028
A0649869
A0318904
62857504074
62857505275
62857504190
62857504021
A0335015
AX100079
A0394331
A0316446
62857504187
62857504189
A0394328
A0394330
62857506149
62857506150
62857506151
AX101169
AX101170
AX101171
62857508183
62857508182
X9905676
X9905675
57
Open Frame Racks & Enclosures
Cable Management & Accessories
Cable Management Racks
AX101174 Rack Kit
Open Frame Rack Kits
Rack Kits are offered for both copper and fiber cabling. Welded and knock-down rack
assemblies are available for copper; knock-down rack kits are available for fiber. All
units feature one rack with either one or two vertical and two horizontal channels.
Description
Vertical Cable Management Channel Copper
Knock-Down Assembly, Black, 5 x 84 in. 40 lb.
Vertical Cable Management Channel Fiber
Knock-Down Assembly, Black, 5 x 84 in. 35 lb.
Knock-Down Assembly, Grey, 5 x 84 in. 35 lb.
Universal Horizontal Cable Management Channel
Knock-Down Assembly, Black, 19 in. 3 lb.
Knock-Down Assembly, Grey, 23 in. 4 lb.
WESCO #
Mfg. #
62857506160
AX101180
62857505923
62857505922
AX100933
AX100932
62857506161
62857506163
AX101181
AX101183
WESCO #
Mfg. #
Welded Rack Assembly, 44U, (one rack with two vertical & two universal horizontal channels)
Black, 19 x 84 in., 145 lb.
62857506154
AX101174
Knock-Down Rack Assembly, 44U, (one rack with two vertical & two universal channels)
Black, 19 x 84 in., 145 lb.
62857506155
AX101175
Knock-Down Rack Assembly, 44U, (one rack with one vertical & two universal channels)
Black, 19 x 84 in., 100 lb.
62857506156
AX101176
Knock-Down Rack Assembly, 44U, (one rack with one vertical & two universal channels)
Grey, 23 x 84 in., 105 lb.
62857506157
AX101177
Welded Rack Assembly, 44U, (with two universal channels)
Black, 19 x 84 in. (7 ft.) 65 lb.
62857506159
AX101179
Knock-Down Rack Assembly, 44U, (with two universal channels)
Black, 19 x 84 in. (7 ft.) 65 lb.
62857506158
AX101178
Grey, 19 x 84 in. (7 ft.) 65 lb.
62857506233
AX101254
Black, 23 x 84 in. (7 ft.) 70 lb.
62857505921
AX100931
Grey, 23 x 84 in. (7 ft.) 70 lb.
62857505920
AX100930
Description
Rack Kit Copper
58
Rack Kit Fiber
Floor Mount Rack
Distribution Racks
BDR-Style Distribution Racks
The Distribution Rack features 19″ or 23″ mounting rails for attaching a variety of
rack mounted equipment. 48″, 72″ and 84″ high models are included in the line.
Description
Mounting
Weight
Lbs. Kg
Belden
Part Number
48″ Distribution Rack, 19″ Mounting Rails
25U
34
15 BDR-4819
39U
43 20
BDR-7219
39U
50 23
BDR-8419
84″ Distribution Rack, 19″ Mounting Rails,
4″ Channel with Angle Base,12-24 EIA Spacing
45U
60
27
BDR-8419-4
39U
45
20
BDR-7223
45U
52
24
;
Caster Kit for BDR Racks
BDR-8423
B8912-0100
Cable Management Racks (continued)
BDR-Style Vertical Cable Managers
Vertical Cable Managers
The Vertical Cable Managers are used to manage patch cords in front and
cables in the back. Available in 72″ and 84″ heights, the units are available with
removable side panels and doors. They can be used with Distribution Racks
(BDR-Style) and Rack Kit.
Belden
Part Number
Description
72″ Vertical Cable Manager
BDR-7201
84″ Vertical Cable Manager
BDR-8401
84″ Vertical Cable Manager, Double Sided with Cover
BDR-8403
These products are in the process of being assessed for RoHS compliance. Please check our Web Site
for the most current RoHS status.
Vertical Cable Management Channel
Vertical Cable Management Channels are offered for both copper and fiber
cabling. Available in heights of 84″, the channels make cable organization quick
and easy, with Swing Out/Removable doors.
AX101181 Horizontal Cable
Management Channel
Horizontal Cable Management Channel
Horizontal Cable Management Channels are available in widths of 19″ and 23″.
The channels make cable organization quick and easy.
Cable Management Rack
AX101180 Vertical
Cable Management
Channel
The Cable Management Racks are designed for 19″ rack-mount equipment and
are 84″ high. Model BCR-8419-10 features a channel that can be adjusted up to
10″ deep.
AX101371 Multi-Rack
Attachment Spacer
Description
BCR-8419 84″ Cable Management
Rack
Mounting
Belden
Part Number
84″ Cable Management Rack, 19″ Mounting Rails
45
53
24
BCR-8419
84″ C
able Management Rack, 19″ Mounting Rails, 10″ Channel with Cable Management
45
60
27
BCR-8419-10
Server Rack
Server Racks are designed for either 19″ or 23″ rack-mount equipment and
are 84″ high. The Server Rack is available in depths of 24″, 28″ 32″ and 36″ to
accommodate different equipment needs.
Belden
Part Number
Description
BCR-8419-10 84″ Cable Management
Rack w/ 10″ Channel
Weight
Lbs. Kg
84″ Four Post Server Rack, 19″ Mounting, Depth 24″
BSR-8419-24
BSR-8419-28
BSR-8419-32
BSR-8419-36
BSR-8423-24
BSR-8423-28
BSR-8423-32
BSR-8423-36
BSR-8419 Server Rack
59
Wall Mount Racks & Accessories
BWR-3619
Wall Mount Racks
Wall Mount Racks are available in two styles: hinged and swing out. The hinged
rack is 12″ in height and features an adjustable lower shelf. The swing out rack
is available in heights of 36″ and 48″ with 19″ mounting rails. 2U, 4U and 6U Wall
Mount Racks are also offered.
Weight
BWR-4819 — Swing out Distribution
Racks 19″ x 48″ Depth Range 11.5″
to 15.5″
Description
Swing Out Rack
36″ Wall Mount Swing Out Rack, 19″ Mounting Rails x 12″ Fixed Depth
36″ Wall Mount Swing Out Rack, 19″ Mounting Rails x 18″ Depth
48″ Wall Mount Swing Out Rack, 19″ Mounting Rails, 11.5–15.5″ Adjustable Depth
48″ Wall Mount Swing Out Rack, 19″ Mounting Rails x 12″ Fixed Depth
48″ M
ount Swing Out Rack, 19″ Mounting Rails x 18″ Depth
Hinged Rack
AX100785 Wall Mount Bracket, 2U
60
BWR-1219 — 12″ Wall Mont Rack
Hinged mounting
for easy access
Adjustable shelf 2″ - 6″
Lbs.
Kg
Belden
Part Number
18U
30
14
BWR-3619-12
18U
30
14
BWR-3619-18
25U
39
18
BWR-4819
25U
39
18
BWR-4819-12
25U
39
18
BWR-4819-18
Mounting
12″ W
all Mount Rack, Hinged 6U
26 12
19″ Mounting Rails x 9″ Fixed Depth
Wall Mount Bracket
2U Wall Mount Bracket, Black
2U
4
2
4U Wall Mount Bracket, Black
4U
8
4
4U Wall Mount Bracket w/ 2U Swivel
6U Wall Mount Rack
6U Wall Mount Rack with 6U Top and 6U Front 6″
17
8
Rack Space, Tapped 12-24 EIA
Bottom Accessory Shelf
Front Mounted Swing-out Patch Panel Kit, 6U
Single, 3U Space Top Dust Cover
BWR-1219
AX100785
AX100786
AX102514
BER-6X6
BER-AS
BER-6UP
BER-3UC
AX102514 — 4U Wall Mount Bracket
w/2U Swivel
BER-6X6 —
6U Wall Mount Rack
w/6U and 6U Front
Open Frame Rack Accessories & Cable/Cord Management Units
Extender Brackets, Filler Panels, Patch Cord Organizers
Open Frame Rack Extender Brackets
Rack Extenders
The Open Frame Rack Extender Brackets are used to extend a 19″ Panel/
Equipment Mounting for 23″.
Description
19″ Filler Panels
1U
2U
3U
4U
23″
23″
23″
23″
EIA To
EIA To
EIA To
EIA To
Belden Part Number
19″
19″
19″
19″
EIA Extender
EIA Extender
EIA Extender
EIA Extender
Bracket
Bracket
Bracket
Bracket
B9810-0100
B9811-0200
B9812-0300
B9813-0400
Filler Panels
Filler Panels are available in solid or vented for improved air flow.
B9511-1902
Description
B9510-1901
B9512-1901
1U
2U
1U
2U
3U
4U
2U
3U
4U
19″
19″
19″
19″
19″
19″
19″
19″
19″
Solid Filler Panel, Gray
Solid Filler Panel, Gray
Solid Filler Panel, Black
Vented Filler Panel, Black
Belden Part Number
A0644497
A0644499
B9910-0100
B9911-0200
B9912-0300
B9913-0400
B9914-0200
B9915-0300
B9916-0400
Patch Cord Organizers
The Patch Cord Organizers keep wires and cable under control.
Among the many features of the Patch Cord Organizers are:
Top: Bottom: B9512-1902
B9512-1902
Horizontal / Vertical Patch Cord Management
Front / Rear Management
Removable Covers
Bend Radius Control
Description
Belden Part Number
1U 19″ Cable Organizer
2U 19″ Cable Organizer with Saddle Rings
B9510-1901
B9511-1902
1U 19″ Rack Mount Cable Organizer with Finger Stock and Cover (1.5″ x 2″)
B9512-1901
2U 19″ Rack Mount Cable Organizer with Finger Stock and Cover (3″ x 3″)
B9512-1902
2U 19″ Cable Organizer with Finger Stock and Cover Front and Rear
2U 19″ Cable Organizer with Quick Touch (2″ X 3″)
1U 19″ Cable Organizer with Radius (Waterfall)
1U 23″ Cable Organizer
2U 23″ Cable Organizer with Saddle Rings
B9512-1902-FR
B9513-1902
B9514-1901
B9610-2301
B9611-2302
61
Open Frame Rack Accessories & Cable/Cord Management Units
Ring Panels, Organizer Trays, Brackets & Patch Cord Channel
AX100249 Organizer Tray, 3U
Open Frame Rack Cable and Patch Cord Management
The Open Frame Rack Cable and Patch Cord Management accessories
can be used with patch panels in open frame racks for distribution cable
and patch cord organization, routing and protection. They allow easier
cord access and simplify moves, additions and changes.
AX100463
Rear Cable Bracket
AX100793 Patch Cord Organizer Channel
AO396695 Organizer Ring Panel, 2U
AX101173 Cable Tie Bar
AO644488 Organizer Panel, 1U
62
AX100789 Cable Support Bracket
Description
Cable Support Bracket
Grey Black Organizer Panel
1U, Grey 1U, Black 2U, Grey 2U, Black Organizer Ring Panel
2U, Grey 2U, Black Organizer Tray
3U, Grey 3U, Black WESCO #
Mfg. #
62857505863
62857505864
AX100788
AX100789
62857504503
62857504504
62857504505
62857504506
A0644488
A0644489
A0644490
A0644492
62857504203
62857504275
A0396695
A0403977
62857505405
62857505406
AX100248
AX100249
Description
WESCO #
Horizontal Cable Management Channel
1U, Grey 62857505867
1U, Black 62857505868
2U, Grey 62857505869
2U, Black 62857505870
4U, Grey 62857505871
4U, Black 62857505872
Blank Filler Panel
1U, Grey 62857504509
1U, Black 62857504504
2U, Grey 62857504511
2U, Black 62857504512
Cable Tie Bar
Black
62857506055
Rear Cable Bracket
Grey 62857505569
Black 62857505570
Velcro Saddle
(25 per pack) 62857505857
Velcro Roll, 203 mm (8 in.)
long ties, (25 per roll) 62857505858
Velcro Roll, 305 mm (12 in.)
long ties, (25 per roll)
62857505859
Multi-Rack attachment spacer
Attachment spacer 62857506352
Mfg. #
AX100792
AX100793
AX100794
AX100795
AX100796
AX100797
A0644497
A0644498
A0644499
A0644500
AX101173
AX100462
AX100463
AX100781
AX100783
AX100784
AX101371
Modular Enclosures
Data Deep Enclosure
29″ Wide x 34″ Deep
BDP-Style Data Deep Enclosure
Data Deep Enclosure
The Data Deep is a freestanding enclosure that features a 34″ depth for
mounting servers, UPS units,
controllers, battery backups, network monitors and more. The unit’s
mounting rails can be adjusted, after installation, from 19″ EIA to 23″ EIA
spacing to allow for cable management and different depths of
equipment. Among the many features and benefits of this modular unit are:
Reversible Doors: Spring-loaded hinges allow quick change of door
swing.
Lift-off Side Panels: Flush surface lock fasteners permit quick
disconnect and lift off.
Cable Gland Plate: Adjustable bottom plate minimizes dirt and dust
inside the enclosure.
Cable Access Top: Features a 14.25″ x 4″ cable access rubber gland
which helps prevent dust from entering the enclosure.
Rear Cable Plate: Two, 3-7/8″ x 8-1/2″ openings for cable access
with removable plates and edge grommet kit. Also features two 1.75″
capped openings.
Tempered Safety Glass: Strengthens door and its easy-to-clean, nonscratching, tinted bronze color enhances overall appearance.
Grounding kit Included.
63
Dimensions
Top
Front
Side
Back
Bottom
Technical Specifications
Enclosure Size
H
XDP72 Frame, Gland Plate, Casters & Levelers
72″
78″
84″
W
D
Weight Mounting
29″ 34″ 350 lb
29″ 34″ 380 lb
29″ 34″ 390 lb
Rack Spaces
19″, 23″ or Frame Mount Shelf 39U
EIA - 310 - D Compliant
Description
Data Deep 84″ Black, 19″ Mounting, 10″ Fan Top, Glass Door, Vented Rear Door, Two Sides, 20 Amp Power Strip
Data Deep 84″ Black Frames w/19″ Mounting
Belden Part Number
XDP84-3-122226
XDP84-3-100000
Modular Enclosures
Giga Server Enclosure
26″ Wide x 42″ Deep
BGS-Style Giga Server Enclosure
Giga Server Enclosure
The Giga Server is a freestanding enclosure with a 26″ wide x 42″
deep footprint. Each of the four
corners of the enclosure has a built-in vertical cable channel. The unit’s
mounting rails have 19″ EIA spacing to allow for cable management
and different depths of equipment. Hinged cable access panels allow
for large bundles of cable to be quickly routed from enclosure to
enclosure or from the front
of the enclosure to the rear of the enclosure. Among the many features
and benefits of this modular unit are:
Reversible Door: Spring-loaded hinges allow quick change of
door swing.
Split Rear Doors: French-style perforated rear doors maximize
space between enclosures.
Lift-off Side Panels: Flush surface lock fasteners permit quick
disconnect lift off.
Door and Side Panel Security: Doors and side panels lock;
handles are flush mounted.
Integrated Cable Management.
Grounding Kit included.
Dimensions
64
Technical Specifications
Enclosure Size
XGS84 84″ Frame, Three Pair 19″ Mounting Rails,
Casters, Levelers
H W D
Weight
Mounting
84″ 26″ 42″ 450 lb
Description
Giga Server 84″ Black, 3-pair 19″ Mounting, Perforated Top, Rigid Perforated Front, Split Fan Doors, Two Perforated Sides,
20 Amp Power Strip
Giga Server 84″ Black, with 3-pair 19″ Mounting
19″
Rack Spaces
45U
Belden Part Number
XGS84-3-112346
XGS84-3-100000
Wall Mount Enclosures and Accessories
Wall Mount Enclosure
BWM 4820-GD
The Wall Mount Enclosure provides a secure and permanent location for a variety
of components. Most units feature 19″ mounting rails and are available with either
a glass door with lock or a steel door with lock and 1 pair of 10-32 tapped rails. A
48″ NEMA-12 model is also offered for harsh environments.
Description
Weight Mounting
Mfg#
24″ Wall Mount Enclosure 6″ Depth
BWM 2406-SD
BWM 2420-SD
Wall Mount Assy. Swing-Out View
20″ Depth / 24″ Depth
Wall Mount Assy.
Rear Section Mid Section
Front Door w/Glass
with Glass Door with Lock
with Steel Door with Lock
40 lb Back Board
35 lb Back Board
XWM-2406-GD-C
XWM-2406-SD-C
75 lb 12U
70 lb 12U
XWM-2420-GD-C
XWM-2420-SD-C
80 lb 12U
75 lb 12U
XWM-2424-GD-C
XWM-2424-SD-C
45 lb Back Board
45 lb Back Board
XWM-3606-GD-C
XWM-3606-SD-C
90 lb 18U
85 lb 18U
XWM-3620-GD-C
XWM-3620-SD-C
98 lb 18U 95 lb 18U
XWM-3624-GD-C
XWM-3624-SD-C
75 lb Back Board
65 lb Back Board
XWM-4806-GD-C
XWM-4806-SD-C
Wall Mount Assy. 4″ Depth
Rear Section
Plywood Back Board (Opt.)
Front Door w/Glass
120 lb 25U
110 lb 25U
XWM-4820-GD-C
XWM-4820-SD-C
135 lb 25U
125 lb 25U
48″ NEMA 12 Wall Mount Enclosure 24″ Depth
with Steel Door with Latch
205 lb 26U
XWM-4824-GD-C
XWM-4824-SD-C
XWM-4830-SD-3S0001
These products are in the process of being assessed for RoHS compliance. Please check
our Web Site for the most current RoHS status.
6″ Depth
BWM-9312-1600 Fan Assembly
(2) 4″ Diameter Fans (160 CFM) w/Guard
NEMA 12
65
Wall Mount Enclosures and Accessories
Accessories and Swing Racks
Optional Basket
Wall Mount Enclosure Accessories
Description
66
Belden Part Number
Caster/Leveler Base
Caster/Leveler Base, 20″ or 24″ Back Board
X8912-0200-C
24″ Plywood Back Board (Black)
XWM-2401
Fan Assembly
Fan Assembly (2) 4″ Diameter Fans (160 CFM) with Guard
Mounting Uprights
XWM-3601
XWM-4801
19″ Mounting Uprights, 24″
XWM-2419
XWM-3619
XWM-4819
XWM-9312-1600
Swing Racks
The Swing Rack provides easy access to the rear of rack mounted equipment in
a free-standing environment. It is ideal for applications where space is limited and
rear access is essential.
Description
Weight
Mounting
Belden Part
Number
84″ Swing Out Distribution Rack
179 lb
34U
XSW-8419
Power Strip Mounting Kit (Sold Separately)
Top Mounting Wire Basket (24″ Long) (Sold Separately)
Swing Racks
XSW-0100
XSW-0200
Belden® High Density Racking System
The new Belden®
High-density Racking System
gives you more real estate plus
it restores manageability to
your cabling. Moves, adds and
changes are truly easy, saving
you time and money.
Belden’s racking system
will make moves, additions,
upgrades and changes to your
networks easy –saving you time,
money and stress
67
With the recent introduction of its new Highdensity Racking System, Belden now offers a
full range of premier, high-reliability products for
networking environments — from telecom closets
to world class data centers. Our fully-integrated
family of networking products reliably deliver the
bandwidth you need and help you make the best
use of valuable real estate.
The trend in industry today is for cables and
connectivity-related products to get smaller and
increasingly dense. But when engineers add
more equipment, they can easily lose network
manageability. It’s clear that with increased density
also comes the need to manage it. And, highdensity connectivity is Belden’s specialty.
Belden’s racking system will make moves,
additions, upgrades and changes to your networks
easy, saving you time, money and stress — it’s
a well-engineered platform that offers you a high
level of versatility and flexibility in systems design.
System Components
•54 new racking system components and
accessories: These new items are completely
compatible with the cable management items we
already offer.
•Four vertical manager styles: Each manager is
easily modifiable into different configurations,
including single-sided high density, doublesided high density, single-sided low density
and double-sided high-and-low density. Vertical
managers come in four widths: 35/8 in., 6 in.,
10 in., and 12 in., all at the standard industry
height of 84 in. An open back design permits
unrestricted routing of cables from front–to-rear or
rear-to-front of the rack.
•Two symmetrical manager half doors: These
actually comprise one full-length door that
covers the cabling in a vertical manager while
allowing easy cable access. Snap-on hinge
permits the door to open both ways, left to right
or right to left. If desired, the door can be fully
removed.
;
Belden® High-density Racking System (continued)
•Retention gates: These components keep
cables from popping out of place when doors
are opened or removed. Like the doors, gates
are double-hinged so you can open them either
way. Gates can be repositioned or removed as
needed. And
if you order an optional gate kit, you can
configure your managers to the number
of gates desired.
• Horizontal cable managers: Available in
two widths and three heights (1U, 2U, and 3U).
Equipped with a double-hinged cover that enhances
the look of your installation.
•Cable-retainer bar: Attachable in accessory
mounting holes, this item can segregate vertical
cables by creating a convenient cable channel
sub-section.
•Additional gates and fingers: Readily available,
if desired.
68
•Optional back cover: Vertical managers permit
the attachment of a back cover on which you can
attach a cable spool or cable bundle fasteners.
System Features
•High level of modularity: This hallmark feature of
Belden’s racking systems is enabled by ease of
removal or movement of components, as well as
by the wide selection of components we offer you.
The completely interchangeable cable retention
gates, doors, fingers and accessories in our new
systems allow you to adapt them to your own
specific needs.
•Vertical manager part sets: Each vertical manager
configuration includes a complete set of necessary
basic components, including doors (on high-density
managers), gates, push-in fasteners, cable strap
mounts, cable retainer bars and mounting hardware.
•Modular, removable finger sections: Available
in high or low density. For high density, these
come in handy 11U high sections and screw into
a vertical manager. Unlike analogous items in the
marketplace that come as part of a complete
molded plastic strip running the full height of
a manager, Belden’s finger sections can be
conveniently taken out during reconfigurations.
Even in the field it will be easy to reconfigure
them. A typical change might entail taking out
a section of high-density fingers and replacing
it with a more widely-spaced one. Also, if you
break an individual finger, it’s easy to replace its
module. On the high-density manager, the fingers
are aligned with the rack units, allowing for patch
cords to be routed directly to the vertical manager.
This eliminates the need to use a horizontal
manager, a great space saver.
•System scalability: The new Belden system is
very easily reconfigured and modified to handle
future system growth, add-ons, or changes.
•Compatibility of vertical managers: They are
compatible with any EIA-310-D- compliant 2and 4-post racks.
•Mixed media application: Belden’s new racking
system is designed to handle both copper and
fiber structured cable networks.
•Quarter-inch diameter accessory mounting holes:
These are present the entire length of each vertical
manager to permit easy attachment of accessories
– e.g., cable bundle fasteners.
•Any-point-to-any-point routing capability: It’s easy
to route your cable from a given patch panel to
another panel within the same rack, to the back
of the rack, or to an adjacent rack, while still
maintaining the proper cable bend radius.
•Easy installation: You’re done in just minutes
using only standard hand tools. What’s more,
reconfiguration and modification of the system in
the field after initial installation will be a snap.
•Great aesthetics: The professional look of
Belden’s sturdy new rack system, with its highly
esthetic flat-black finish, is suitable for display in
any world class telecom environment. You’ll be
proud to show off your investment.
;
You’ve come to expect a great line of cable
management products from Belden, and that’s
what we’ve delivered here. Belden is the brand
you can trust, the name that’s synonymous with
high quality, innovative products you can rely on.
• Horizontal cable managers: Available in
two widths and three heights (1U, 2U, and 3U).
Equipped with a double-hinged cover that enhances
the look of your installation.
High-density
(1U) Fingers
High-density Vertical Manager
•Cable-retainer bar: Attachable in accessory
mounting holes, this item can segregate vertical
cables by creating a convenient cable channel
sub-section.
•Additional gates and fingers: Readily available,
if desired.
•Optional back cover: Vertical managers
permit the attachment of a back cover on which
you can attach a cable spool or cable bundle
fasteners.
Low-density
Vertical Manager
Cable Retainer Bar
Low-density Finger
Accessory
Mounting Holes
Double-hinged
Cable Retention Gate
Horizontal Manager
Snap-on Door
Hinge
ouble-hinged
D
Half-door
High-density Fingers
;
69
Description
Belden Part Number
Relay Racks
Aluminum relay rack, 19” WX84” H, #12-24 tapped hole, Black
Aluminum relay rack, 23” WX84” H, #12-24 tapped hole, Black
Steel relay rack, 19” WX84” H, #12-24 tapped hole, Black
Steel relay rack, 19” WX84” H, #12-24 tapped hole, Black, Welded
BHRR194
BHRR234
XDR-8419-4
XDR-8419-4W
Single-sided High-density Vertical Manager
Includes (1) Slack management spool kit with 10” and 12” managers, (2) 1/2 door sections, (3) gates, 25) fasteners, (6) strap
mounts, (2) retainer bars and mounting hardware
High-density with doors, 3-5/8” WX84” H, Black
BHVH003
High-density with doors, 6” WX84” H, Black
BHVH006
BHVH010
BHVH012
Single-sided Low-density Vertical Manager
Includes (1) vertical manager, (6) strap mounts, (8) gates, (25) fasteners, (2) retainer bars and mounting hardware Note: Door
not included on low-density manager
70
Low-density without doors, 3-5/8” WX84” H, Black
BHVL003
Low-density without doors, 6” WX84” H, Black
BHVL006
BHVL010
BHVL012
Double-sided High-density Vertical Manager
Includes (2) Slack management spool kits with 10” and 12” double-sided managers, (4) 1/2 door sections, (6) gates, (50)
fasteners, (12) strap mounts, (4) retainer bars and mounting hardware
High-density with doors, 3-5/8” WX84” H, Black
BHVHH03
BHVHH06
BHVHH10
BHVHH12
High/Low-density Vertical Manager
Includes (1) Slack management spool kit with 10” and 12” managers, (2) vertical managers, (2) 1/2 door sections, (11) gates,
(50) fasteners, (12) strap mounts, (4) retainer bars and mounting hardware
High/low-density combination with front doors, 3-5/8” WX84” H, Black
BHVHL03
High/low-density combination with front doors, 6” WX84” H, Black
BHVHL06
BHVHL10
BHVHL12
Vertical Manager Backcover
3-5/8” W, Black
BHBC03X
6” W, Black
BHBC06X
10” W, Black
BHBC10X
12” W, Black
BHBC12X
Vertical Manager Doors (1 Pair)
3-5/8” W, Black
BHDK03X
6” W, Black
BHDK06X
10” W, Black
BHDK10X
12” W, Black
BHDK12X
;
Description
Belden Part Number
Horizontal Manager with Cover
19” WX1U, Black
BHH191U
19” WX2U, Black
BHH192U
19” WX3U, Black
BHH193U
23” WX1U, Black
BHH231U
23” WX2U, Black
BHH232U
23” WX3U, Black
BHH233U
Transition Channel
Top transition channel, 19” WX6” D, Black
BHTT196
Lower transition channel, 19” WX6” D, Black
BHTL196
Lower transition channel double, 19” WX6” D, Black
BHTD196
Transition tray (rack to rack)
BHTR196
Top transition channel, 23” WX6” D, Black
BHTT236
Lower transition channel, 23” WX6” D, Black
BHTL236
Lower transition channel double, 23” WX6” D, Black
BHTD236
VAccessories
Additional accessories (filler panels, patch cords organizers, nylon and Velcro ties) can be found in Belden’s Cable
Management catalog (p. 43-47).
Slack management spool kit, Black
BHSK020
Slack management spools (2), Black
BHSP020
Gate Kit, 3-5/8” W, Black
BHGL03X
Gate Kit, 6” W, Black
BHGL06X
BHGL10X
BHGL12X
Retention gate (6), 3-5/8” W, Black
BHGR03X
Retention gate (6), 6” W, Black
BHGR06X
BHGR10X
BHGR12X
Finger section, 11U, Black
BHFS11U
Rack mount finger bracket, 11U, Black
BHFB11U
Divider bar, 3-5/8” W, Black
BHDB03X
Divider bar, 6” W, Black
BHDB06X
BHDB10X
BHDB12X
Fastener for vertical manager (100)
BHPF100
Tie mount for vertical manager (100)
BHSM100
71
Open Frame Enclosure
High Density Open Frame Enclosure
4
7
5
2
8
6
9
3
1
72
4
Cable management and
density-enabling features
1. Easy access to the equipment and
cables is provided; this enclosure
does not have the outside post that is
found in most standard enclosures.
2. When ganged together, a 7-inch wide
cable manager channel is created to
facilitate cabling routing. When the
side panels are used, a 2-3/4-inch
cable management channel is available.
3. Unit includes built-in front and rear
cabling management channels with
optional 1RU-spaced bend radius
cable management fingers and slack
management spools.
4. An optimized footprint (30” wide x 43”
deep x 84” high) that is compliant with
the TIA-942 recommendation and
enables the use of deep networking
equipment (up to 28.6” deep). The
enclosure is also rated at 2,000 lbs.
5. Multiple cable access options – on
the top (knock-outs are provided so
you can provide opening only where
needed) and the bottom.
6. Front-to-rear channel routing options
with rounded edges.
7. Optional ladder rack mounting bracket.
Cooling features
Designed to reduce air flow obstruction
and let the “hot” and “cold” aisles concept
work at its best:
8. Corrugated front and rear doors to
increase the surface of the door and
its rigidity. The resulting perforation
pattern provides an air flow opening
of 80%+ (TIA-942 recommends a
minimum of 50%).
9. The door frame design ensures air
flow throughout the enclosure – and
the rear door can be equipped with
high capacity (CFM) fans when forced
air is required.
General features
• When the doors are closed, the cable
management channels are hidden,
enhancing the look of the install.
• Optional Zone 4 seismic rated version.
• The doors are reversible; they are
spring-loaded to quickly change the
door swing.
• Flush surface lock fasteners permit
quick disconnect and lift off of the sides.
• The doors and side panels lock for
security purposes and the door handles
are flush-mounted.
• A grounding kit is offered, as well as
high strength leveling feet and casters.
• Various power distribution mounting
options.
This extraordinary enclosure will soon
enter production so be sure to contact
your local Belden rep for more information.
Network Connectivity Products
Media Converters, Transceivers & Hubs and Network Tester
Media Converters for Ethernet and Fast Ethernet
Media Converters
Media Converters enable the connection of dissimilar network cabling types,
while maintaining the same network speed. A legacy Thinnet segment can be
connected to a 10Base-T Hub or switch port with an AX-200 Converter or, link
two different 10Base-T networks together over a multimode fiber optic link with
a pair of AX-270s. Connect a legacy Thinnet segment over fiber with the AX-280
converter. The AX-5270 can be used for interbuilding links or attached to a fiber
backbone.
Transceivers and Ethernet Hubs
AX-1912 Media Converter Rack
The AX-50, 70 and 80 Transceivers enable the connection of a legacy AUI port
to 10Base-T, Thinnet, or Fiber Optic media. The transceiver is powered from the
host and requires no external power supply.
The AX-509 Ethernet Hub has an AUI port which accepts UTP, Fiber Optic
or BNC transceivers. Specified for use by many U.S. Government Agencies.
Includes a 110v/12v power supply.
Realtime 10/100 Base-TX Ethernet Network Test Unit
AX050, 70 and 80 Transceivers and
AX-509 Ethernet Hub
The AX-110BT Realtime 10/100 Base-TX Ethernet Network Test Unit is a cost
effective way to quickly determine a network’s operating condition. Plug the unit’s
patch cord into the tester, then into any open RJ-45 jack in an office, cubicle
or conference room. Immediately see if the jack is a live network node capable
of either 100 Mb/s or 10 Mb/s. Next check patch cord continuity and polarity.
Connect the downlink to a PC to check NIC card link, speed and full or half duplex
capabilities. Connect the uplink to a hub or switch port to verify link and speed.
Description
Belden Part Number
Media Converter
AX-110BT Realtime 10/100 BaseTX Ethernet Network Test Unit
10Base-T/10Base2, RJ-45 to BNC
AX-200
10Base-T/10Base-FL, RJ-45 to ST-Compatible fiber connectors
AX-270
10Base2/10Base-FL, BNC to ST-Compatible fiber connectors
AX-280
100Base-TX/100Base-FX, SC-Compatible fiber connectors
100Base-TX/100Base-FX, ST-Compatible fiber connectors
Media Converter Rack
AX-5270SC
AX-5270ST
Holds up to 12 converters and multi lead power supplies,
19 in. rack-mount ready
AX-1912-MCR
Power Supply, 4-lead 110v/12v, powers up to 4 converters
Power Supply, 8-lead 110v/12v, powers up to 8 converters
Transceivers and Ethernet Hubs
AX-270P4U
AX-270P8U
UTP Transceiver, 10Base-T, AUI to RJ-45, side port
AX-50
UTP Transceiver, 10Base-T, AUI to RJ-45, rear port
AX-50R
Fiber Transceiver, 10Base-FL, AUI to ST-Compatible
AX-70
Thinnet Transceiver, 10Base2, AUI to BNC
Ethernet Hub with 8 RJ-45 10Base-T ports and 1 AUI port
Network Tester
Realtime 10/100 Base-TX Ethernet Network Test Unit AX-80
AX-509
AX-110BT
These products are in the process of being assessed for RoHS compliance. Please check
our Web Site for the most current RoHS status.
73
PowerSense Products
Introduction
Powersense Products
Delivering Power over Ethernet (PoE) to the
PowerSense —
Enterprise
The Cutting-Edge, Modular Approach To
Consistent with Belden’s commitment
Work in conjunction with existing
Ethernet infrastructure and structured
to quality and innovation, we offer
Midspan hubs are power-sourcing
cabling, including the Ethernet switches or
PowerSense™ high-performance power
equipment. These hubs are patch panel-
shared media devices
distribution equipment for the efficient and
like devices that are installed between the
reliable delivery of Power over Ethernet.
existing Ethernet switch and the devices to
What is Power over Ethernet?
Power over Ethernet refers to the ability
to power network devices directly over the
existing data connection, eliminating the
need for an external power supply for each
device. With Power over Ethernet, devices
such as IP telephones, wireless LAN access
points, security cameras and other enterprise
terminals can safely receive power over
legacy Category 5 or better LAN cabling
without modifying the existing infrastructure.
Power over Ethernet is also a necessity for
the Voice-over-IP (VoIP) solution as this
service requires an alternative power source
74
Power over Ethernet
Key benefits of PowerSense include:
for IP phones.
Power over Ethernet consists of two
essential components: the power-sourcing
equipment (PSE) and the powered devices
(PD).
be powered (see figure). They add power
to the spare pairs of a data cable without
disturbing the transmission of the data.
Belden PowerSense Midspan Hubs provide
these unprecedented features:
Full compliance with IEEE 802.3af
Standards (PoE Protocol)
Module options for 48V, 24V, 12V and
Cisco CDP™ protocols
FCC, CE and CB tested and approved
for worldwide use
Modular chassis: 24-, 20-, 10-, 8- and 1port designs
Assured safety: each module autodetects the device’s power requirements
before forwarding power; modules allow for
transparent 10/100Mb and management
operations
Each module port is voltage isolated
Are the optimal solution for applications
such as WLAN, VoIP, Web-based security
cameras and access control devices
Provide a scaleable solution: since
PowerSense hubs are modular, new
modules can be added as required
Allows a fast recovery from an
internal power fault condition;
modules may be hot swapped.
Reduce the total cost of ownership.
To further ensure customer satisfaction, you
may try any PowerSense product free for
30 days.
Advanced Replacement Warranty
All PowerSense products have a full
2-year warranty for product quality and
durability. We also offer an Advanced
Replacement Warranty which means
that if a PowerSense product needs
to be replaced, a new unit will be
immediately shipped.
with user replaceable fuses and is “hot
swappable.”
PowerSense
Midspan Hub Example
(Using Existing
Ethernet Switch)
PowerSense Products
Power Over Ethernet Midspan Hubs
PowerSense AX-8000 Series
Modular Multiport
PowerSense 20-Port Midspan Hub
IEEE 802.3af compatible
AX-8000 PowerSense Series
AX-8510 PowerSense10-Port
Midspan Hub
Modules can be mixed and matched to support CDP™ devices, IEEE 48volt, 24-volt or 12-volt applications within the same chassis. Power IP phones,
wireless access points, security cameras and other low voltage devices safely
and efficiently. A single port model is also available (see page 14.4) in any of the
module styles for single device powering applications.
The AX-8000 Modular Multiport In-Line Power Hub includes 20-slot and 10slot modular chassis units which may be populated with any combination of
PowerSense modules. The individual modules are all hot swappable and fully
voltage isolated from each other. These units help reduce costs and downtime by
allowing individual modules to be removed or inserted while the chassis and all
other modules remain operational.
Description
PowerSense Modules
IEEE CDP
24v
12v
HW
Belden Part Number
Chassis Only (without modules)
20-slot PowerSense chassis – 19″ rack mount ready
AX-8220
10-slot PowerSense chassis – w/ rubber feetAX-8210
10-slot PowerSense chassis – 19″ rack mount kit
AX-8210-RM
10-slot PowerSense chassis – wall mount kit
AX-8210-WM
Chassis Complete with 20 Standard Power Chassis Modules
20 Power and Data modules – 12 volt protocol
AX-8320
20 Power and Data modules – 24 volt protocol AX-8420
20 Power and Data modules – IEEE 802.3af compatible AX-8520
20 Power and Data modules – Cisco CDP protocol
AX-8620
Chassis Complete with 10 Standard Power Chassis Modules
AX-8310
AX-8410
10 Power and Data modules – IEEE 802.3af compatible AX-8510
10 Power and Data modules – Cisco CDP protocol
AX-8610
Standard Power Chassis Modules (for devices up to 15.4 watts, uses 1 slot)
Power and Data module – 12 volt protocol
AX-8300
Power and Data module – 24 volt protocol
AX-8400
Power and Data module – IEEE 802.3af compatible
AX-8500
Power and Data module – Cisco CDP protocol
AX-8600
High Wattage Chassis Modules (for devices up to 20 watts, uses 2 slots)
Double Wide Power and Data module – 12 volt protocol AX-8300HW
Double Wide Power and Data module – IEEE 802.3af compatible
AX-8500HW
Double Wide Power and Data module – Cisco CDP protocol
AX-8600HW
Custom Power Chassis Modules (for specific products)
Power and Data module, supports AXIS 205 Camera, 12V
Power and Data module, supports AXIS 2120 Camera, 12V
Power and Data module, supports IndigoVision Camera, 12V
Power and Data module, supports SONY SNCRZ30N Camera, 12V
Power and Data module, supports SAVI Products, 12V
Power and Data module, supports IQinvision IQEYE3 Camera, 24V
Power and Data module, supports Trango Broadband AP, 24V
Power and Data module, supports Mobotix MX-D-03 Camera, 24V Power and Data module, supports Smarteye Camera, 24V
Chassis Cover Plates (for unused slots)
Single slot cover plate
Two slot cover plate
Five slot cover plate
Six slot cover plate
Visit www.BeldenIBDN.com for a product compatibility list.
These products are in the process of being assessed for RoHS compliance.
AX-8300AXIS205
AX-8300AXIS2120
AX-8300IVC100
AX-8300SNCRZ30N
AX-8300SR600101
AX-8400IQEYE3
AX-8400M58305AP
AX-8400MXD03
AX-8400SP400101
AX-8201
AX-8202
AX-8205
AX-8206
Please check our Web Site
75
PowerSense Products
PowerSense AX-8000 Series Single-Port
AX-8000 PowerSense Series
For single device powering applications, this single port version of the popular
AX-8000 PowerSense Series of Modular In-Line Power Hubs is available in any
of the same module styles as the multiport version. Modules can support CDP™
devices, IEEE 48-volt, 24-volt or 12-volt applications to power IP phones, wireless
access points, security cameras and other low-voltage devices safely and
efficiently.
Description
Belden Part Number
Standard Power Modules
Single Power and Data port — 12V Power and Data compatible
Single Power and Data port — 24V Power and Data compatible
Single Power and Data port — IEEE 802.3af compatible Single Power and Data port — Cisco CDP protocol
High Wattage (for devices up to 20 watts, w/ power supply)
Double Wide Power and Data module — 12 volt protocol Double Wide Power and Data module — IEEE 802.3af compatible
Double Wide Power and Data module — Cisco CDP protocol
Custom power modules, with power supply Various Part Numbers
AX-8351
AX-8451
AX-8551
AX-8651
AX-8351HW
AX-8551HW
AX-8651HW
76
PowerSense AX-6000 Series
24-Port, 8-Port Module
AX-6000 PowerSense Series 24-Port
Individual Chassis Module
;
The AX-6000 Modular Multiport In-Line Power Hub safely and efficiently provides
power over LAN data cabling for VolP phones, wireless networking access points,
IP security cameras and other remote network devices.
The PowerSense In-Line Power Hub provides power to LAN devices without
the use of an external power supply for each device. Power is supplied over
the existing LAN data cabling system. This greatly increases the flexibility of
installation and possible locations for such devices, no longer requiring them to
be located near a power outlet. It also adds an unprecedented level of safety and
reliability for powered LAN devices.
The PowerSense Hub is a 24-port rack-mount chassis powering up to 24 devices.
Each 8-port module is hot-swappable and modules may be added to the chassis
without powering down the unit. If an individual power port is damaged due to a
lightning strike or power surge, the module bank may be hot swapped out without
powering down the chassis or disconnecting the other devices attached to the
other power ports in the chassis.
When used with an uninterruptible power supply, the PowerSense Hub provides
continuous power for up to 24 connected devices. PowerSense is tough and
durable, made with an all metal chassis.
PowerSense operates on Category 5, 5e or 6 grade LAN data cable at standard
Ethernet distances. The AX-6000 series supports powered devices requiring the
IEEE 802.3af PoE protocol.
PowerSense Products
Power Over Ethernet Midspan Hubs (continued)
Belden
Part Number
Description
Chassis Only (without modules)
PowerSense Chassis, 3 slots, each slot holds one module AX-6224
PowerSense Chassis, 1 slot, holds one module
AX-6208
1-slot Chassis (with one standard 6500 module installed)
8 Power and Data Ports — IEEE 802.3af compatible, 10/100 Mbs AX-6108
Optional 19″ Rack Mount Kit for one slot chassis
AX-6108-RM
3-slot Chassis (with up to three standard 6500 modules installed)
24 Power and Data Ports — IEEE 802.3af compatible, 10/100Mbs AX-6524
16 Power and Data Ports and one cover plate — IEEE 802.3af compatible
AX-6516
8 Power and Data Ports and two cover plates — IEEE 802.3af compatible AX-6508
3-slot Chassis GIG (with up to three 6500GIG modules installed)
24 Power and Data Ports — IEEE 802.3af compatible, 10/100/1000Mbs AX-6524GIG
16 Power and Data Ports and one cover plate — IEEE 802.3af compatible AX-6516GIG
8 Power and Data Ports and two cover plates — IEEE 802.3af compatible
AX-6508GIG
3-slot Chassis HW4 (with up to three 6500HW4 modules installed)
12 Power and Data Ports — RJ-45, IEEE, High Power (36 watts per port) 10/100Mbs
AX-6512HW4
AX-6508HW4
AX-6504HW4
Spare Chassis Modules (Individual; fits one or three slot chassis)
8 Power and Data Ports — RJ-45, IEEE 802.3af compatible, 10/100Mbs
AX-6500
8 Power and Data Ports — RJ-45, IEEE 802.3af compatible, 10/100/1000Mbs AX-6500GIG
AX-6500HW4
Chassis Cover Plates (for unused slots)
Single Module Cover Plate (covers one module slot) AX-6201
These products are in the process of being assessed for RoHS compliance. Please check our Web Site for the most current RoHS status.
77
PowerSense Products
Power Over Ethernet Accessories
PoE Connectors, Data & Power Splitting “Y” Cables
Power over Ethernet Connector
Power over Ethernet Connectors
Power over Ethernet Connectors allow Cisco 7900 Series VoIP Phones or AP350
or AP1100 to be powered with IEEE 802.3af style 48-volt power over Ethernet.
Power may come from a powered Ethernet switch or midspan power hub.
Connector installs near powered device. Two LEDs let user know whether power
is originating from an Ethernet switch or midspan power hub.
Description
Belden Part Number
Connectors
Input IEEE 802.3af power from any powered switch or midspan hub
AX-8858-01
Input IEEE 802.3af power from HP Pro Curve powered switch AX-8858-02
Data Splitting Y Cables
Data & Power Splitting “Y” Cables
Data & Power Splitting “Y” Cables are for 12 volt applications and feature a RJ-45
female/male and male power pin. They provide precise splitting of the signal for
accurate performance. Various plug sizes/applications are listed below.
78
Description
Belden Part Number
Data Splitting Y Cables
2.5 mm plug for AXIS PTA -20, 2100, 2120
AX-820Y-01
2.1 mm plug for Vivotek PTV-20
AX-820Y-02
1.3 mm plug for Intellinet PTI-20 AX-820Y-03
No plug, bare wire for IVC 100 AX-820Y-04
Special connector for Symbol AP 41XX
AX-820Y-05
5.5 mm barrel w/ 1.0 mm center -Sony SNC-RZ30N, Sony PTS-20, AXIS 2130 AX-820Y-06
MAXI 7-pin socket for SAVI Products
AX-820Y-07
CONXALL 6-pin for SAVI SR-600-101
AX-820Y-08
1.0 mm plug for AXIS 205, 210, 230, 241Q/S, 250S
AX-820Y-09
2.1 mm plug on 8″ power wire for Symbol AP 3020 seriesAX-820Y-10
Hyper Plus 5E
Category 5E
UTP/4 Pair
•Horizontal and Patch Cable
•Tested to 100 MHz
•Riser and Plenum Rated
• Limited Combustible (CMP-50) Available
Berk-Tek’s Hyper Plus 5e Standard Category 5e UTP cables are designed for horizontal applications in a
structured cabling network to connect between the user outlet and horizontal cross-connect.
Construction
0.52 mm (24 AWG), bare copper wire insulated with
polyethylene (non-plenum) or FEP (plenum). Two
insulated conductors twisted together to form a pair
and four such pairs laid up to form the basic unit
jacketed with flame-retardant PVC.
Standards
North American International
ANSI/TIA/EIA-568-B.2
Category 5e and Category 5
ISO/IEC 11801 Category 5
Features
•Supports 10BASE-T, 100BASE-T, Token Ring, TPPMD, Voice, Telephony, Multimedia, 155 Mb/s ATM
• ETL Verified to TIA/EIA-568-B.2 Category 5e
Benefits
• Universally accepted design for global, commercial
network installations
• Simplified structured cabling solution preserving
long-term network investment
• Warranted, trouble-free cabling installation
and maintenance
Flame Rating
Non-Plenum—UL 1666, CMR,
Plenum—NFPA 262, CMP
Applications
Berk-Tek’s Hyper Plus 5e Standard Category 5e UTP
cable is intended for high speed data applications up
to 100 MHz including:
IEEE 802.3 1000BASE-T, 100BASE-TX, 10BASE-T
155 Mb/s ATM
ANSI X3.263 100Mb/s
Colour
Pair 1
Pair 2
Pair 3
Pair 4
Code
White/Blue
White/Orange
White/Green
White/Brown
Technical Data - Physical
Conductor diameter–in. (mm)
CMR
.020
(0.52)
.020
Cable diameter–in. (mm)
Nominal cable weight–lb./kft. (kg/km)
Max. installation tension–lb. (N)
Min. bend radius–in. (mm)
.187
20
25
1.0
.165
20
25
1.0
(4.8)
(30)
(110)
(25.4)
Blue
Orange
Green
Brown
Temperature Rating
Installation 0º to +50ºC
Operation -10ºC to +60ºC
CMP
(0.52)
(4.2)
(30)
(110)
(25.4)
CM (Patch)*
.024 (0.61)
.215
23
25
1.0
(5.5)
(34.2)
(110)
(25.4)
* Patch cables utilize stranded tinned copper conductors.
Parametric Measurements
Mutual Capacitance
DC resistance
Skew
Velocity of Propagation Input Impedance
Horizontal
4.6 nF/100 m nom.
9.38 Ohms/100 m max.
45 ns/100 m max.
72% nom. Non-Plenum, 72% nom. Plenum 100 ± 15% 0.772-100 MHz, ISO/IEC 11801
Part Numbers - Standard Category 5E UTP
WESCO # Mfg. # No. Pairs 61285298046
10032528 4
61285298061
10032714 4
61285298066
10032719 4
61285298021
10032227 4
Jacket PVC
PVC
PVC
PVC Alloy
Patch
5.6 nF/100 m nom.
9.09 Ohms/100 m max.
25 ns/100 m max.
70% nom. 100 ± 15% 0.772-100 MHz
Flame Rating CMR Riser
CM Patch
CM Patch
CMP Plenum
Jacket Colour
Blue
Blue
Gray
Blue
Standard Lengths: 1,000 feet (305 meters.) Specifications subject to change without notice. Part numbers shown are for Tek-Pak boxes.
Also available on reels or reel-in-a-box. Limited Combustible version (CMP-50 rating) also available. Other jacket colours available.
79
LANmark-350™
Premium Category 5E
UTP/4 Pair
•Tested to 350 MHz
Berk-Tek’s LANmark-350 Premium Category 5e UTP cables are designed to meet the most advanced UTP
horizontal cable applications. Tested up to 350 MHz, the guaranteed performance of this cable far exceeds the
ANSI/TIA/EIA-568-B.1 and B.2 and ISO/IEC 11801 horizontal cable requirements for PS-NEXT, attenuation,
Return Loss, attenuation-to-crosstalk ratio (ACR) and impedance, making it ideal for high-end transmission links
supporting the most sophisticated networking protocols.
Construction
0.52 mm (24 AWG), bare copper wire
insulated with polyethylene (non-plenum)
or FEP (plenum). Two insulated conductors twisted
together to form a pair and four such pairs laid up to
form the basic unit jacketed with flame-retardant PVC.
Standards
North American International 80
ANSI/TIA/EIA-568-B.2 Category 5e
ISO/IEC 11801 Category 5
Flame Rating
Features
•ACR, PS-NEXT, Attenuation, RL are specified and
tested to 350 MHz
•Guaranteed 0.5-2.0 dB better RL than Category 5e
standard
•ETL verified to TIA/EIA-568-B.2 and ISO/IEC 11801
Benefits
•Reliably supports today's network protocols
•Reduced installation costs and maintenance
•Lower Bit Error Rates, increases network efficiency
and uptime
Non-Plenum—UL 1666, CMR, IEC 332-1
Patch—UL 1581, CM, CMG, IEC 332-1
Applications
Berk-Tek’s LANmark-350 Premium Category 5e UTP
cable is intended for high speed data applications
including:
155 Mb/s ATM
ANSI X3.263 100Mb/s
4/16 Mb/s Token Ring
Part Numbers - Premium Category 5E UTP
10032419
4
61285298036
10032426 4
61258298051
10032640
4
61285298001
10032060
4
61285298006
10032065
4
Jacket PVC
PVC
PVC
PVC Alloy
PVC Alloy
CMR Riser
CM Patch
CMP Plenum
CMP Plenum
Jacket Colour
Yellow
Blue
Blue
Yellow
Blue
Note: Standard Lengths: 1,000 feet (305 meters.) Specifications subject to change without notice. Part numbers shown here are for Tek-Pak
boxes. Also available on reels or reel-in-a-box. Limited Combustible version (CMP-50 rating) also available. Other Jacket Colours available.
LANmark-1000
Enhanced Category 6
UTP/4 Pair
•Full Duplex
The LANmark-1000 is an ANSF/TIA/EIA Category 6 verified cable that is ideal for gigabit Ethernet network
applications. Exceptional electrical characteristics include: PS-NEXT, PS-ACR, PS-ELFEXT, ELFEXT, RL and
LCL/TCL/EL TCTL(balance).
LANmark-1000 was the first cable to set requirements for cable balance. Balance is the performance parameter
which effects cable emissions. Cable balance is a property that protects the network from the damaging effects of
outside noise sources such as alien crosstalk.
Construction
Features
Bare copper wire insulated with polyethylene (nonplenum) or FEP (plenum). Two insulated conductors
twisted together to form a pair and four such pairs laid
up to form the basic unit jacketed with flame-retardant
PVC.
•ETL verified to ANSI/TIA/EIA - 568-B.2-1 Category 6
standard
•Full power sum performance
•Documented balance characteristics (LCL, LCTL)
Standards
Benefits
North American International ANSI/TIA/EIA-568-B.2
Category 6
ISO/IEC 11801
Flame Rating
Non-plenum—UL 1666, CMR, IEC 332-1
Patch—UL 1581, CM, CMG, IEC 332-1
Applications
•Power sum characterization gives highest
performance using existing applications
•Addition of balance requirements improves overall
cable performance and reduces cable emissions
which results in reduced transmission errors
•Capable of handling full broadband and baseband
video signals
•State-of-the-art testing allows high frequency
characterization of the cable to 550 MHz
Berk-Tek’s LANmark-1000 UTP cable is intended for
high speed data applications including:
155 Mb/s ATM
ANSI X3.263 100 Mb/s
1000BASE-TX (ANSI/TIA/EIA-854-2001)
Part Numbers - Category 6 UTP
WESCO #
Mfg. #
No. Pairs
Jacket
Flame Rating
Jacket Colour
61285298286
10032459
4
PVC
CMR Riser
White
61285298041
10032455
4
PVC
CMR Riser
Blue
61285298291
10032461
4
PVC
CMR Riser
Yellow
61285298056
10032680
4
PVC
CM Patch
Blue
61285298011
10032092
4
PVC Alloy
CMP Plenum
White
61285298016
10032094
4
PVC Alloy
CMP Plenum
Blue
61285298321
10032090
4
PVC Alloy
CMP Plenum
Yellow
Note: Standard Lengths: 1,000 feet (305 meters.) Specifications subject to change without notice. Part numbers shown here are for Tek-Pak
boxes. Also available on reels. Other Jacket Colours available.
81
LANmark-2000
Premium Category 6
UTP/4 Pair
•Multimedia
The LANmark-2000 cable series is comprised of TIA/EIA Category 6, compliant cables that are specified and
tested to 600 MHz. LANmark-2000 is a true multimedia cable and is specifically designed to handle voice, video
and data simultaneously. The useable bandwidth allows for the convergence of analog video, voice and data onto
one cable simultaneously. This convergence of technologies simplifies even the most dynamic network.
LANmark-2000 was Berk-Tek’s highest performing Premium Category 6 cable. This outstanding electrical
performance ensures that transmitted signals will be stronger and less susceptible to outside interference,
resulting in more robust network performance.
Construction
23 AWG, bare copper wire insulated with polyethylene
(non-plenum) or FEP (plenum). Two insulated
conductors twisted together to form a pair and four
such pairs laid up around a central spline to form the
basic unit jacketed with flame-retardant PVC.
Standards
82
North American International ANSI/TIA/EIA-568-B.2
Category 6
ISO/IEC 11801- 2nd edition
Flame Rating
Non-plenum—UL 1666, CMR
Patch—UL 1581, CM, IEC 332-1
UL Listed
Applications
Berk-Tek’s LANmark-2000 UTP cable is intended for
high speed data and multimedia applications including:
1000BASE-TX (ANSI/TIA/EIA-854-2001)
155 Mb/s ATM ANSI X3.263 100Mb/s
Part Numbers - Enhanced Category 6 UTP
10033817
4
61285298076
10033822
4
61285298026
10032251
4
Features
•Full duplex operation capable over four cable pairs
•Increased usable bandwidth vs. the Category 6
standard
•Documented balance characteristics
(LCL/TCL, EL, TCTL)
•Reduced attenuation (Insertion Loss)
•ETL verified to TIA/EIA Category 6 standard
•Highest performing Category 6 UTP cable available
Benefits
•Capable of handling applications which utilize full
duplex operation and/or simultaneous bidirectional
transmission
•Provides bandwidth required for multimedia,
broadband video, analog video and other
future applications
•Balance characteristics improves overall cable
performance and reduces cable emission which
results in reduced transmission errors
•Improved attenuation allows more signal to reach
the receiver resulting in cleaner data and video
transmission
•State-of-the-art testing allows high frequency
characterization of the cable to 600 MHz
Jacket PVC
PVC
PVC Alloy
CM Patch
CMP Plenum Note: Standard Lengths: 1,000 feet (305 meters.) Specifications subject to change without notice. Available on reels only.
Other Jacket Colours available.
Jacket Colour
Blue
Blue
Blue
Power Sum
Category 5E
UTP/24 Pair
•Backbone Cable
•Voice and Data Applications
Berk-Tek’s Power Sum Category 5e, 25 pair UTP cable is designed for use in data and voice backbone
applications and is ideal for Category 5e zone cabling applications and Interconnect cable assemblies.
Construction
24 AWG, bare copper wire insulated with polyethylene
(non-plenum) or FEP (plenum). Two layer core
construction jacketed in flame-retardant PVC (nonplenum) or fluoropolymer (plenum).
Standards
North American ANSI/TIA/EIA-568-B.2 Category 5e Backbone
GL 444 & C22.2 No 214-02
Flame Rating
Non-plenum—UL 1666, CMR
Applications
Berk-Tek’s 25 pair Power Sum Category 5e cable is
intended for voice and data applications including:
ATM 155 Mb/s
ANSI X3.263 100 Mb/s
Ethernet 10BASE-T, 100BASE-TX
Features
• ETL verified ANSI/TIA/EIA-568-B.2 Category 5e
Backbone Cable Power Sum Performance
• Small diameter and flexible construction with stable
cable geometry
• Supports 10BASE-T, 100BASE-TX, Token Ring,
Voice, 155 Mb/s ATM, Multi-media, TP-PMD
• Ideally suited for backbone, cross-connect and
pre-connectorized assemblies
Benefits
Colour Code
Pair 1
Pair 2
Pair 3
Pair 4
Pair 5
Pair 6
Pair 7
Pair 8
Pair 9
Pair 10
Pair 11
Pair 12
Pair 13
Pair 14
Pair 15
Pair 16
Pair 17
Pair 18
Pair 19
Pair 20
Pair 21
Pair 22
Pair 23
Pair 24
Pair 25
White/Blue
White/Orange
White/Green
White/Brown
White/Gray
Red/Blue
Red/Orange
Red/Green
Red/Brown
Red/Gray
Black/Blue
Black/Orange
Black/Green
Black/Brown
Black/Gray
Yellow/Blue
Yellow/Orange
Yellow/Green
Yellow/Brown
Yellow/Gray
Violet/Blue
Violet/Orange
Violet/Green
Violet/Brown
Violet/Gray
Temperature Rating CMR
Installation
0°C to +50°C
Operation
-20°C to +75°C
Blue/White
Orange/White
Green/White
Brown/White
Gray/White
Blue/Red
Orange/Red
Green/Red
Brown/Red
Gray/Red
Blue/Black
Orange/Black
Green/Black
Brown/Black
Gray/Black
Blue/Yellow
Orange/Yellow
Green/Yellow
Brown/Yellow
Gray/Yellow
Blue/Violet
Orange/Violet
Green/Violet
Brown/Violet
Gray/Violet
CMP
-50°C to +200°C
-50°C to +200°C
• Simplified structured cabling solution preserving
long-term network investment
• Supports current networking protocols
• High-performance multi-pair cable assemblies
compatible with today's most common network types.
Part Numbers - Enhanced Category 6 UTP
10061456
25
61285298511
10059632
25
Jacket PVC
Fluoropolymer
CMP Plenum Jacket Colour
Gray
Gray
Note: Standard Lengths: 1,000 feet (305 meters.) Specifications subject to change without notice. Available on reels only.
83
Adventum
Loose Tube
Fiber Optic Cable
•Singlemode, Multi-mode and GIGAlite™
•Outdoor/Indoor
Berk-Tek's revolutionary Outdoor/Indoor Adventum™ Cables are designed to be used in Riser and Plenum rated
environments. Adventum supports the latest Gigabit Communications Protocols, including 10 Gigabit Ethernet
and ATM. This cable design utilizes Berk-Tek's unique DryGel™ waterblocking system. DryGel™ technology utilizes
super absorbent polymers to replace the messy gel filler inside the fiber tubes.
Berk-Tek's loose tube cable design can be used in all typical campus and outdoor/ indoor installations, and is
available with standard multi-mode, singlemode and GIGAlite™ fibers. This design affords the installer the ability
to place cable anywhere in a network, bypassing the traditional transition points required in most installations.
Adventum cable is available in two to 216 count fiber constructions. These cables have been thoroughly tested in
accordance with Telcordia GR-409, GR-20, and ICEA-696 standards where applicable.
Buffer Tube Construction
DryGel™ blocked colour coded loose tubes containing
up to 12, 250 µm, individually coloured fibers.
Standards
84
International European
North American
ISO/IEC 11801
EN 50173
Telecordia GR-409 & GR-20
EIA/TIA-568B
ICEA S-104-696 &
ANSI/ICEA S-87-640
OFNR /FT4
OFNP /FT6
Applications
Berk-Tek's Adventum Loose Tube, Riser Rated, or
Plenum Rated fiber optic cable is intended for all
high speed data applications, including:
IEEE 802.3 FOIRL
10 Mb/s
IEEE 802.3 10BASE-F
10 Mb/s
IEEE 802.3 1000BASE-SX/LX 1000 Mb/s
IEEE 802.3 10GBASE-X
10 Gb/s
FDDI
100 Mb/s
ATM
155 Mb/s
622 Mb/s
1.2/2.4 Gb/s
Fibre Channel FC-PH
1.062 Gb/s
Riser Part Numbers
Fibers WESCO # Fiber Type: 62.5/125µm-Standard
6
61285298121
12
61285298131
24
61285298141
Fiber Type: 62.5/125µm-GIGAlite™
6
61285298126
12
61285298136
24
61285298146
Features
• Designed to support Gigabit Ethernet, Gigabit ATM,
Fibre Channel and other high-speed applications
• Riser or plenum rating enables installation to go
directly from outside plant to riser shaft with no
transition points
• Cable Core and Buffer Tubes use DryGel™ water
blocking system
Benefits
• Compact, water blocked, plenum or riser rated,
flexible loose tube design of all dielectric construction
allows for installation in any outside plant to riser shaft
with no transition point
• No cleaning of gels required for installation, greatly
reducing installation time and cost
• Transition points in network are not needed
• System grounding requirements are eliminated
Temperature Rating
Operation
Storage
Plenum Installation (>12 Fibers)
Plenum Installation
Riser Installation
- Physical
Mfg. # -40°C to +75°C
-40°C to +85°C
-20°C to +60°C
-20°C to +60°C
-20°C to +60°C
Plenum Part Numbers - Physical
WESCO #
Mfg. #
LTR006CB3510/25
LTR012CB3510/25
LTR6B024CB3510/25
61285298091
61285298101
61285298111
LTP006CB3510/25
LTP012CB3510/25
LTP6B024CB3510/25
LTR006GB3510/25
LTR012GB3510/25
LTR6B024GB3510/25
61285298096
61285298106
61285298116
LTP006GB3510/25
LTP012GB3510/25
LTP6B024GB3510/25
Flame Rating: OFNR/FT4, Sheath: black, riser rated, UV resistant, Packaging: Reels
Alternate fibers and fiber counts also available.
Premise Distribution
Tight Buffered
Fiber Optic Cable
• Singlemode, Multi-mode and GIGAlite™
•Backbone, Horizontal and Patch Cable
Berk-Tek’s tight buffered, fiber optic cable is designed for installation in Riser/Plenum environments and
horizontal and interbuilding backbone structures.
Berk-Tek’s tight buffered cable is available with standard multi-mode, singlemode and GIGAlite™ fibers.
Construction
900 µm buffered fibers surrounded by aramid yarns.
Sheathed using a special, state-of-the-art, polymer
material. All dielectric.
Outdoor Consideration
Black-jacketed and water-blocked versions of both riser
and plenum are available.
Standards
International European
North American
ISO/IEC 11801
EN 50173
Telecordia GR-409
ANSI/ICEA S-83-596
UL OFNR/FT4
UL OFNP/FT6
Applications
Berk-Tek’s tight buffered cable is intended for all high
speed data applications including:
IEEE 802.3 FOIRL
10 Mb/s
IEEE 802.3 10BASE-F
10 Mb/s
IEEE 802.3 1000BASE-SX/LX 1 Gb/s
FDDI
100 Mb/s
ATM
155 Mb/s, 622 Mb/s
1.2/2.4 Gb/s
Fibre Channel FC-PH
1.062 Gb/s
Features
• Flexible, small diameter, 900 µm tight buffered
construction
• High tensile strength and small diameter design
• Six to 144 count fiber construction riser designs ideal
for horizontal and backbone and installation
• Singlemode, multi-mode, and hybrid designs available
• Support token ring, 10BASE-F, Fast Ethernet, FOIRL,
Fibre Channel FC-PH, ATM, Gigabit Ethernet, FDDI,
Sonet, voice, video and other networking applications
• Also available in low smoke zero halogen design
Benefits
• Cost-saving design easy to install and terminate
• Provides for greater pulling distances reducing
installation time
• Assurance that cables will meet required
specifications for communication networking
applications
• Broad design selection allows for mix and match of
fiber components to specific networking applications
• One cable design meeting all structured cabling
network communications applications
Temperature Rating
Operation
Storage
Installation
-20°C to +75°C
-40°C to +85°C
0°C to 80°C
Riser Part Numbers - Physical
Plenum Part Numbers - Physical
Fibers WESCO # Fiber Type: 62.5/125µm-Standard
6
61285298181
12
61285298191
24
61285298201
Mfg. # WESCO #
Mfg. #
PDR006CB3510/25
PDR012CB3510/25
PDR024CB3510/25
61285298151
61285298161
61285298171
PDP006CB3510/25
PDP012CB3510/25
PDP6B024CB3510/25
Fiber Type: 62.5/125µm-GIGAlite™
6
61285298186
12
61285298196
24
61285298206
PDR006GB3510/25
PDR012GB3510/25
PDR024GB3510/25
61285298156
61285298166
61285298176
PDP006GB3510/25
PDP012GB3510/25
PDP6B024GB3510/25
Flame Rating: OFNR/FT4, Sheath: black, riser rated, UV resistant, Packaging: Reels, Alternate fibers and fiber counts also available.
85
Interlock Armor
Armor-Tek
Fiber Optic Cable
•Singlemode, Multimode, GIGAlite
•Suitable for hazardous environments
•Plenum/Riser Rated
Berk-Tek’s Interlock Armor cables consist of a standard premise distribution or Adventum loose tube fiber cable
with an aluminum or steel spirally wrapped armor encasing it. The cable is then covered with a plenum or riser
rated jacket to prevent snags during installation.
Interlock Armor cables are ideal for installations requiring additional ruggedness or greater crush resistance.
However, there is a more practical use for these well-engineered cables. Interlock Armor fiber cables can be
installed instead of fiber cable in plenum innerduct or in conduit. This provides the installer with a user friendly,
“one pull” solution to a typically expensive and labour-intensive installation process. Interlock Armor cables can
also provide the user with flexibility for relocations or design changes after the cable has been pulled, something
plenum innerduct or conduit cannot offer.
By installing Interlock Armor cables instead of plenum innerduct or conduit, the user can save about 25% in
materials and labour and as much as 60% in valuable installation time.
One thing to keep in mind when installing Interlock Armor cables is that due to the metallic content in the cables it
is recommended to ground these cables at time of installation.
Construction
86
Tight buffered or DryGel loose tube cables containing
up to 144 fiber count with either steel or aluminum
interlock armor; with overall flame rated thermoplastic.
Features
All of Berk-Tek’s Interlock Armor cables are rated
OFCP for plenum or OFCR for riser.
•Jacketed armor that remains flexible due to the spiral
wrap armoring process
•The armored design allows for an easy one-pull
installation into any environment
•Aluminum or steel interlock armor is available
•Aluminum interlock offers 10 to 13 times the crush
resistance of a standard fiber cable
•Steel interlock offers 12 to 19 times the crush
resistance of a standard fiber cable
•High tensile strength for installation of cable
•Compact outside diameters when compared to
plenum innerduct or conduit
• Available with 62.5 µm, 62.5 µm GIGAlite, 50 µm
GIGAlite-10, and singlemode fiber and hybrid
constructions
Applications
Benefits
Standards
International
European
North American
ISO/IEC 11801
EN 50173
ANSI/TIA/EIA-568-A
ANSI/ICEA S-87-640
Bellcore GR-20
OFCR
Flame Rating
Interlock Armor cables can be used in any of the
following installation environments: indoor, indoor/
outdoor, in backbones, between closets, fiber to the
desk, if a pathway is beyond its fill ratio, areas where
extra physical protection is needed for difficult runs,
where network security is a concern, in a fast track
installation, between buildings, direct buried in trays or
direct buried by plowing.
Berk-Tek’s Interlocked Armor loose tube and tight
buffered fiber optic cable is intended for all high speed
data applications, including:
IEEE 802.3 FOIRL
10 Mb/s
IEEE 802.3 10BASE-F
10 Mb/s
IEEE 802.3 1000BASE-SX/LX 1 Gb/s
FDDI
100 Mb/s
ATM
155 Mb/s
622 Mb/s
1.2-2.4 Gb/s
Fibre Channel FC-PH
1.062 Gb/s
• Eliminate the need for conduit or plenum innerduct
by installing the interlock armor cable, providing a
significant cost savings in both materials and labour
•Extremely durable cables for hazardous environments
or difficult cable installations
•Installation time can be reduced by as much as 60%
versus installing conduit or innerduct
•Interlock armor cables accommodate last minute
relocations or pathway changes whereas innerduct or
conduit is not a flexible alternative
• Interlock armor cables are not governed by fill ratios
because they are UL listed as cable assemblies, allowing
a higher concentration of cables in an area than conduit
•Can be installed in campus environment due to the
durability and indoor/outdoor rating of the cable
• Provides additional protection and security for
your fiber backbone due to the ruggedness of the
armoring materials
Armored cables available in tight buffered and loose tube constructions.
Powerware Uninterruptible Power Systems
Eaton® | Powerware 3105
The Eaton| Powerware 3105 offers a Compact, convenient, cost effective UPS for
the home or small office.
• Black, Power bar styled UPS
• Easy to install, operate and maintain
• Total of 8 Power Receptacles: 4 Surge Protected, 4 Battery Protected
• Transformer block spacing for both surge and surge with battery receptacles
• Communication ports include USB connectivity and DataProtection via a RJ11
port, both USB and data cable included
• Unobtrusive design for placement on or under the desk, or wall mounted
• User replacable battery
• International Version Available: 230V (Line to Neutral) 50/60Hz, IEC plug and
receptacles
• 5 Year Pro-Rated Warranty and $25,000CDN Load Protection Guarantee
WESCO #
79034104365
Mfr.'s Model # Mfr.'s Part #
PW 3105 500 103004247-55921
79034104366
PW 3105 700
103004248-55921
Description
500VA / 300W, 120V 5-15P Input Line cord,
(8) 5-15R output receptacles. 4 Surge Only,
4 Battery backup. Full/Half Load runtime: 3 /
11 minutes.
(8) 5-15R output receptacles. 4 Surge Only,
4 Battery backup. Full/Half Load runtime: 3 /
9 minutes.
Dimensions
H x W x D (inches)
7 x 11 x 4.4 @ 11.7 lbs
7 x 11 x 4.4 @ 14.5 lbs
The Eaton| Powerware 5110 is a cost effective UPS with superior power protection
and versatile mounting options for POS, access control, phone, and small server/
workstation solutions.
• Black Line Interactive UPS
• Power Line, Automatic Voltage Regulation in a Compact slim profile design
• Total of 8 Power Receptacles: 4 Surge protected, 4 Surged and battery protected
• Transformer block spacing for both surge and surge with battery receptacles
• Converse battery runtime by plugging non-essential equipment into surge outlets
• User replacable battery for easy and speed of maintenance
• Delivers short term mobile power with Start-On-Battery capability
• Communication ports include USB connectivity and DataProtection via a RJ11
port, both USB and data cable included
receptacles
• 5 Year Pro-Rate Warranty and $150,000CDN Load Protection Guarantee with
optional 3 and 5 year Service Plans
WESCO#
79034104374
Mfr.'s Model #
PW 5110 500
Mfr.'s Part #
103004256-5591
79034104375
PW 5110 700
103004257-5591
79034104376
PW 5110 1000
103004258-5591
79034104377
PW 5110 1500
103004259-5591
Description
500VA / 300W, 120V 5-15P Input Line cord, (8)
5-15R output receptacles. 4 Surge Only, 4 Battery backup & Surge. Full/Half Load runtime: 3
/ 11 minutes.
/ 9 minutes.
/ 17 minutes.
(8) 5-15R output receptacles. 4 Surge Only, 4
Battery backup & Surge. Full/Half Load runtime: 4 / 12 minutes.
Dimensions
H x W x D (inches)
10.6 x 3.4 x 10.2 @
12.1lbs
10.6 x 3.4 x 10.2 @
15.2lbs
10.6 x 3.4 x 15.1 @
28.0lbs
10.6 x 3.4 x 15.1 @
29.1lbs
87
The Eaton® | Powerware 5115
The Eaton® | Powerware 5115 offers advance protection for PCs, small-home
offices, workstations, small internet-working devises and more.
• Beige, Line Interactive UPS
• True Sine Wave output delivers continuous, smooth power
• Buck Boost voltage regulation corrects incoming voltage fluctuations
• Advanced Battery Management (ABM™) significantly increases battery service life
• Hot Swappable batteries for speed and ease of battery replacements
• Standard RS232 communications port with network transient Protector
• User replacable battery for ease and speed of maintenance
receptacles
• 10 Year Pro-Rate Warranty and $150,000CDN Load Protection Guarantee with
optional 3 and 5 year Service Plans
• Communicates with Lansafe Power Management software via Serial and USB ports
WESCO #
79034103117
Mfr.'s Model #
PW5115 500 USB
Mfr.'s Part #
05146548-5591
79034103123
PW5115 750 USB
05146554-5591
79034103129
PW5115 1000 USB
05146560-5591
79034103134
PW5115 1400 USB
05146566-5591
88
Description
500VA / 320W, 120V 5-15P Input Line
Cord, (4) 5-15R Ouput receptacles. Full/
Half Load runtime : 5 / 13 minutes
Half Load runtime 6 / 15 minutes
1000VA / 670W, 120V 5-15P Input Line
Half Load runtime: 5 / 15 minutes
1400VA / 950W, 120V 5-15P Input Line
Dimensions
H x W x D (inches)
7.6 x 5.9 x 10.6 @
17.2 lbs
7.6 x 5.9 x 13.2 @
27.3 lbs
7.6H x 5.9 x 13.2 @
27.8 lbs
7.6 x 5.9 x 15.4 @
37 lbs
The Eaton® | Powerware 5115 Rack Mount
The Eaton® | Powerware 5115 Rack Mount offers high density, advanced
protection for servers, storage systems, network equipment and other critical
devises, all in a 1U rack mounted form factor
• Black, Line Interactive UPS
• 1U Rack Height conserves valuable rack space
•Unique chasis design adapts to 19-inch rack, wall mount, side-cabinet (zero U), and bench-top applications ALL hardware included
•Advanced Battery Management (ABM™) significantly increases battery service life
•True Sine Wave output
•Load segments for sequencing of load shutdowns with extended battery runtime delivered to the critical
connected devises
•Hot Swappable batteries for speed and ease of battery replacements
•Standard RS232 communications port with Netwrok transient Protector
• International Version Available: 230V (Line to Neutral) 50/60Hz, IEC plug and receptacles
•10 Year Pro-Rate Warranty and $150,000CDN Load Protection Guarantee with optional 3 and 5 year Service Plans
WESCO #
74317200042
Mfr.'s Model #
PW5115 500RM-BL
Mfr.'s Part #
103003266-6591
74317200043
PW5115 750RM-BL
103003269-6591
call
PW5115 1000RM-BL 103003272-6591
74317200045
PW5115 1500RM-BL 103003275-6591
Description
500VA / 320W, 120V 5-15P Input Line Cord,
(4) 5-15R Ouput receptacles. Full/Half Load
runtime: 5 / 13 minutes
1000VA / 670W, 120V 5-15P Input Line
Cord, (6) 5-15R Ouput receptacles. Full/Half
Load runtime: 5 / 15 minutes
1440VA / 1000W, 120V 5-15P Input Line
Cord, (4) 5-15R Ouput receptacles. Full/Half
Dimensions
H x W x D (inches)
1.75 x 17.3 x 22.8 @
35.2 lbs
1.75 x 17.3 x 22.8 @
41.4 lbs
1.75 x 17.3 x 22.8 @
41.4 lbs
1.75 x 17.3 x 22.8 @
48.6 lbs
The Eaton® | Powerware 5125; Tower (1-2.2kva), Rack/Tower (1-3kva), and
RackMount (5 & 6kva) offers advanced power protection and features, available in 3
different form factors.
• Tower Model: 1kva to 2.2kva for traditional floor, shelf or desk orientation
• Rack/Tower: 1kva to 3kva for space saving 2U Rack mounting (rails not included)
• Advanced Battery Management (ABM™) significantly increases battery service life
• True Sine Wave output
• Load segments for sequencing of load shutdowns with extended battery runtime
delivered to the critical connected devises
• Hot Swappable batteries for speed and ease of battery replacements
• Rack Mount 5 & 6kva comes with both Black and Beige Face Plates, RS232 and
USB communication ports
• RackMount 5 & 6kva units offer Hot Swappable Power Electronics, and battery
modules
• Extended Battery Runtimes avaiable with add on battery modules
• All models feature an X-Slot communications bay for optional connectivity cards:
web/SNMP. Modbus, relay contacts, and EMP monitoring
• 10Year Pro-Rate Warranty and $150,000CDN Load Protection Guarantee
WESCO#
Mfr.'s Model #
79034103293 PW5125 1000
Mfr.'s Part #
05146629-5591
79034103296 PW5125 1500
05146632-5591
79034103299 PW5125 2200
05146635-5591
79034103300 PW5125 2200b
05146636-5591
79034103557 PW5125 1000 RM-BL
05146666-6501
79034103559 PW5125 1500 RM-BL
05146669-6501
call
PW5125 2400 RM-BL
05147564-6501
79034104393 PW5125 3000 RM-BL
05147152-6501
79034104341 PW5125 5000
103003611-5591
79034104360 PW5125 5000 WEB
103003611-5597
call
PW5125 6000 HW
103003610-5591
call
PW5125 6000 HW WEB 103003610-5597
Description
1440VA /1050W, 120V 5-15P Input Line Cord,
(6) 5-15R & (2) 5-20R Ouput receptacles. Full/
2080VA / 1600W, 208V IEC-C14 15A Inlet, (9)
IEC-320 C13 10A Outlets. Full/Half Load runtime: 5 / 14 minutes
2400VA / 2250W, 120V L5-30P Input Line Cord,
(1) L5-30R & (6) 5-15R Ouput receptacles. Full/
2880VA / 2700W, 120V L5-30P Input Line Cord,
(1) L5-30R & (6) 5-15R Ouput receptacles. Full/
5000VA / 4500W, High voltage 200-240V L630P Input Line Cord, (2) L6-20R, (4) IEC C13
output receptacles with (1) L6-30R on short cord
Full/Half Load runtime: 7 / 19 minutes
5000VA / 4500W, High voltage 200-240V L630P Input Line Cord, (2) L6-20R, (4) IEC C13
output receptacles with (1) L6-30R on short cord
Installed web/SNMP/xHub Card. Full/Half Load
6000VA / 5400W, High voltage 200-240V HardWired Input Block, Hardwired Output block &
(4)IEC C13, & (4)IEC C19 Output receptacles.
6000VA / 5400W, High voltage 200-240V HardWired Input Block, Hardwired Output block &
(4)IEC C13, & (4)IEC C19 Output receptacles.
Installed web/SNMP/xHub Card. Full/Half Load
Dimensions
H x W x D (inches)
9.45 x 6.38 x
15.79 @ 34.3 lbs
9.84 x 6.38 x
18.39 @ 50.7 lbs
9.84 x 8.07 x
19.41 @ 68.3 lbs
9.84 x 8.07 x
19.41 @ 68.3 lbs
3.5 (2U) x 17.0 x
19.4 @ 61 lbs
3.5 (2U) x 17.0 x
19.4 @ 61 lbs
3.5(2U) x 19.0 x
24.5 @ 89 lbs
3.5(2U) x 19.0 x
24.5 @ 89 lbs
5.25 (3U) x
17.50 x 26.0 @
161 lbs
5.25 (3U) x
17.50 x 26.0 @
161 lbs
5.25 (3U) x
17.50 x 26.0 @
161 lbs
5.25 (3U) x
17.50 x 26.0 @
161 lbs
89
The Eaton® | Powerware 9120; Tower UPS for complete power protection, robust
enough for industrial applications, more than capable for networks, servers, and
telecommunications.
• True Double conversion On Line technology for complete protection against all 9
known electrical power problems
• Beige, Tower Designed case
• Advanced battery management for twice the battery life
• Robust Overload capability for Industrial applications
• Load Segments to shut down a bank of receptacles to extend battery time on the
load which needs longer runtime
• Built in LCD screen to monitor and gain status data locally at the UPS
• Hot Swappable batteries to simplify service
• Extended battery modules for longer runtimes
• Standard USB and RS232 communication ports with option X-slot port for web/
Dimensions
H x W x D (inches)
WESCO #
Mfr.'s Model #
Mfr.'s Part #
Description
79034103446
PW 9120 700
05147356-5591
Cord, (4) 5-15R Ouput receptacles.
9.6 x 6.2 x 16.2 @
29 lbs
79034103447
PW 9120 1000
05147357-5591
1000VA / 700W, 120V 5-15P Input
Line Cord, (4) 5-15R & (2) 5-20R
Ouput receptacles. Full/Half Load
9.6 x 6.2 x 16.2 @
35.5 lbs
79034103448
PW 9120 1500
05147358-5591
1500VA / 1050W, 120V 5-15P Input
Line Cord, (4) 5-15R & (2) 5-20R
Ouput receptacles. Full/Half Load
10.8 x 6.7 x 17.5 @
46.5 lbs
79034103449
PW 9120 2000
05147359-5591
2000VA / 1400W, 120V 5-20P Input
Line Cord, (6) 5-20R Ouput receptacles. Full/Half Load runtime: 12 / 34
minutes
14.2 x 8.6 x 18.6 @
82 lbs
79034103450
PW 9120 3000
05147360-5591
3000VA / 2100W, 120V L5-30P Input
Line Cord, (4) 5-15R, (2) 5-20R & (1)
L5-30R Ouput receptacles. Full/Half
14.2 x 8.6 x 18.6 @
89 lbs
74317200040
PW 9120 3000H
05147547-5591
3000VA / 2100W, 120V HardWired
Input Block, HardWired Output block.
14.2 x 8.6 x 18.6 @
89 lbs
79034103524
PW 9120 3000B
05147548-5591
3000VA / 2100W, 208V L6-20P Input
Line Cord, (2) L6-15R, (1) L6-20R &
(1) L6-30R Ouput receptacles. Full/
14.2 x 8.6 x 18.6 @
89 lbs
90
The Eaton® | Powerware 9125 Family of Level 9 UPS products offers total
protection for banking and security systems, manufacturing process control and
heavily configured applications and is available in a variety of form factors.
• 2 in 1 form Factor from 700va to 3000va, can be rack mounted, stood up as tower
or placed flat on a rack shelf or desk surface, 2U space saving design (rack rails
not included)
• Double conversion technology ensures continuous clean regulated power at all
times
• Advanced Battery Management (ABM™) significantly increases battery life
• Load segments allow control over banks of receptacles to divert power in higher
demand period to the critical part of the load, while also allowing for remote reboot
of equipment
• Hot Swappable batteries for ease and simplicity in battery replacements, with add
on extended battery modules for longer runtimes
• Full Compliment of Options Including: 2 or 4 Post rails, Power Pass external
bypasses, Power distribution Modules, Seismic kits, and enhanced warranties
• Standard RS232 communications port, with X-slot for optional web/SNMP, EMP,
USB, Relay and Multi-Server connectivity cards
• Extended battery modules for longer runtimes
WESCO #
79034103361
Mfr.'s Model #
PW9125 700-BL
Mfr.'s Part #
05146012-6501
79034103363
PW9125 1000-BL
05146002-6501
79034103367
PW9125 1500-BL
05146005-6501
79034103369
PW9125 2000-BL
05146001-6501
79034103371
PW9125 2000-BL 20R
05146001-6506
call
PW9125 2200 WEB-BL
103005652-6597
79034199250
PW9125 2500U-BL
103002716-6591
74317200141
PW9125 2500G-BL
103004340-6591
call
PW9125 2500G HW-BL
103004341-6591
79034199300
PW9125 3000U-BL
103002717-6591
call
PW9125 3000G-BL
103002728-6591
call
PW9125 3000G HW-BL
103004342-6591
Description
Cord, (6) 5-15R Ouput receptacles. Full
Load runtime: 9 minutes
1000VA / 700W, 120V 5-15P Input Line
1500VA / 1050W, 120V 5-15P Input Line
2000VA / 1400W, 120V 5-20P Input Line
2000VA / 1400W, 120V 5-20P Input Line
Cord, (4) 5-15R & (2) 5-20R Ouput receptacles. Full Load runtime: 5 minutes
2200VA / 1600W, 120V 5-20P Input
Line Cord, (4) 5-20R Ouput receptacles.
Includes pre-Installed Web/SNMP Card.
Full Load runtime: 9 minutes
2500VA / 1750W, 120V L5-30P Input
Line Cord, (2) 5-15R, (2) 5-20R & (1)
L5-30R Ouput receptacles. Full Load
runtime: 7 minutes
2500VA / 1750W, 208V L6-20P Detachable Input Line Cord, (4) IEC320-C13 &
(1) IEC320-C19 Ouput receptacles. Full
2500VA / 1750W, 208V HardWired Input
Block, HardWired Output block Full
3000VA / 2100W, 120V L5-30P Input
Line Cord, (2) 5-15R, (2) 5-20R & (1)
L5-30R Ouput receptacles. Full Load
runtime: 5 minutes
3000VA / 2100W, 208V L6-20P Detachable Input Line Cord, (4) IEC320-C13 &
(1) IEC320-C19 Ouput receptacles. Full
3000VA / 2100W, 208V HardWired Input
Block, HardWired Output block Full
Dimensions
H x W x D (inches)
3.5(2U) x 17.0 x 19.4
@ 34 lbs
3.5(2U) x 17.0 x 19.4
@ 34 lbs
3.5(2U) x 17.0 x 19.4
@ 50 lbs
3.5(2U) x 17.0 x 19.4
@ 50 lbs
3.5(2U) x 17.0 x 19.4
@ 50 lbs
3.5(2U) x 17.0 x 19.4
@ 81.5 lbs
3.5(2U) x 17.0 x 23.9
@ 81.5 lbs
3.5(2U) x 17.0 x 23.9
@ 81.5 lbs
3.5(2U) x 17.0 x 23.9
@ 81.5 lbs
3.5(2U) x 17.0 x 23.9
@ 81.5 lbs
3.5(2U) x 17.0 x 23.9
@ 81.5 lbs
3.5(2U) x 17.0 x 23.9
@ 81.5 lbs
91
Eaton® | Powerware 9125 High Voltage: 208 to 240VAC
The Eaton® | Powerware 9125 High Voltage Products are suited for Low Density (14kw) Rack deployed load protection including servers, VoIP, storage, and security, or
floor standing for medical and other critical load protection needs.
• Isolates connected equipment from all incoming power problems to provide the
highest degree of protection
• Conserves valuable rack space with base unit only requiring 5U rack height (rack
rails not included)
• Advanced Battery Management (ABM™) significantly increases battery life
• 60-50Hz Frequency conversion models available, with either hardwired or line
cord connections
• Hot Swappable batteries for ease and simplicity in battery replacements, with add
on extended battery modules for longer runtimes
• 120V Output available with the addition of a Power Pass Distribution Module
(PPDM), all non-Hardwired UPS include L6-30 interface cords to/from PPDM
• Standard RS-232 communication port with X-Slot card options available for web/
SNMP, EMP, USB, Relay and Multiserver connectivity
• Full Compliment of Options Including: 4 Post rails, Seismic kits, and enhanced
warranties
92
WESCO #
79034104088
Mfr.'s Model #
PW9125 5000g
HW-BL
79034104084
PW9125 5000gBL
79034104096
PW9125 6000g
HW-BL
79034104092
PW9125 6000gBL
79034104094
PW9125 6000g
FC-BL
79034104154
PPDM L6-30
79034104155
PPDM L6-20
79034104156
PPDM L5-30
79034104157
PPDM L14-30
79034104158
PPDM HW
79034104159
PPDM EURO
HW
79034104160
PPDM L6-30 &
L14-30
79034104265
PPDM L6-30 (2)
79034104266
PPDM L6-20 (2)
Mfr.'s Part # Description
103003623- 5000VA / 3500W, Selectable 208-240V Hardwired Input, Hard6591
wired Output. PPDM options Not Applicable. Full Load / Half
103003633- 5000VA / 3500W, Selectable 208-240V L6-30P Input Line
6591
Cord, (1) L6-30R Output receptacle (for. PPDM options). Full
Load / Half Load runtime: 13 / 32 minutes
103003625- 6000VA / 4200W, Selectable 208-240V Hardwired Input, Hard6591
wired Output. PPDM options Not Applicable. Full Load / Half
103003635- 6000VA / 4200W, Selectable 208-240V L6-30P nput Line
6591
Cord, (1) L6-30R Output receptacle (for. PPDM options). Full
Load / Half Load runtime: 10 / 34 minutes
103003636- 6000VA / 4200W, with Frequency Conversion, Selectable 2086501
240V L6-30P Input Line Cord, (1) L6-30R Output receptacle
(for PPDM options). Full Load / Half Load runtime: 10/ 34
minutes
103003214PW9125 5/6000 PPDM, L6-30, External Bypass with L6-30P
6501
Input from source, and (1) L6-30R, (8) 5-15R load receptacles
Use with 9125 5000g and 6000g ONLY
6502
6503
6504
Input from source, and (1) L14-30R, (8) 5-15R load receptacles Use with 9125 5000g and 6000g ONLY
103003214PW9125 5/6000 PPDM HW, External bypass, hardwired to
6505
source and load, L6-30 short cords attached to interface to
UPS module Use with 9125 5000g and 6000g ONLY
103003214PW9125 5/6000 PPDM EURO HW, External bypass, hard6506
wired to source and load, L6-30 short cords attached to interface to UPS module Use with 9125 5000g and 6000g ONLY
103003214PW9125 5/6000 PPDM, L6-30&L14-30, External Bypass with
6507
L6-30P Input from source, and (1) L6-30R, (1) L14-30R & (4)
5-15R load receptacles Use with 9125 5000g and 6000g
ONLY
103003214PW9125 5/6000 PPDM, DUAL L6-30, External Bypass with
6508
L6-30P Input from source, and (2) L6-30R, (4) 5-20R load
receptacles Use with 9125 5000g and 6000g ONLY
103003214PW9125 5/6000 PPDM, DUAL L6-20, External Bypass with
6509
L6-30P Input from source, and (2) L6-20R, (4) 5-20R load
receptacles Use with 9125 5000g and 6000g ONLY
Dimensions
H x W x D (inches)
8.75(5U) x 17.4 x
24.9 @ 206 lbs
8.75(5U) x 17.4 x
24.9 @ 206 lbs
8.75(5U) x 17.4 x
24.9 @ 206 lbs
8.75(5U) x 17.4 x
24.9 @ 206 lbs
8.75(5U) x 17.4 x
24.9 @ 206 lbs
5.25(3U) x 17.4 x
28.4 @ 106 lbs
5.25(3U) x 17.4 x
28.4 @ 106 lbs
5.25(3U) x 17.4 x
28.4 @ 106 lbs
5.25(3U) x 17.4 x
28.4 @ 106 lbs
5.25(3U) x 17.4 x
28.4 @ 106 lbs
5.25(3U) x 17.4 x
28.4 @ 106 lbs
5.25(3U) x 17.4 x
28.4 @ 106 lbs
5.25(3U) x 17.4 x
28.4 @ 106 lbs
5.25(3U) x 17.4 x
28.4 @ 106 lbs
The Eaton® | Powerware 9140 is ideally suited for Single Phase Medium Density (59kw) Rack deployed load protection requiring 200-240V IEC C13 or C19 plugs.
• Isolates connected equipment from all incoming power problems to provide the
highest degree of protection
• Conserves valuable rack space with a compact design of only 6U Including a 5
minute internal battery
• Installation is simplified, the 9140 comes complete with pre-installed rack
enclosure hardwire
• Hardwire Input or customer friendly 60A Input line cord
• PW 9140 7.5kva is field upgradeable to the full 10kva capacity
• Exteneral Battery Options for upto 45minutes at 10kva, 3u each
• Hot Swappable Power and battery modules, with an automatic built-in bypass
switch located in the chassis
• 120V Output and/or NEMA receptacles are available with the addition of Power
Pass Distribution Modules (PPDM)
Dimensions
H x W x D (inches)
WESCO #
Mfr.'s Model #
Mfr.'s Part #
Description
79034104925
PW9140 7500-BL
HW
103005093-6591
7.5kva / 6kw Selectable 208-240V
hardwired Input, hardwired output with
(3)IEC-C19 & (2) IEC-C13 Output receptacles. Full Load / Half Load runtime: 7 /
18 minutes, Upgradeable to 10kva
10.5(6U) x 17.2 x 30
@ 254 lbs
79034104923
PW9140 10000-BL
HW
103004728-6591
10kva / 8kw Selectable 208-240V
hardwired Input, hardwired output with
(3)IEC-C19 & (2) IEC-C13 Output receptacles. Full Load / Half Load runtime : 5
/ 12 minutes
10.5(6U) x 17.2 x 30
@ 254 lbs
93
79034104926
PW9140 7500-BL
103005094-6591
7.5kva / 6kw Selectable 208-240V
IEC309-60A Input Line cord, IEC30960A Output Line cord & (4)IEC-C19
Output receptacles. Full Load / Half
Load Runtime: 7 18 minutes, Upgradeable to 10kva
10.5(6U) x 17.2 x 30
@ 265 lbs
79034104922
PW9140 10000-BL
103004727-6591
10kva / 8kw Selectable 208-240V
IEC309-60A Input Line cord, IEC30960A Output Line cord & (4)IEC-C19
Output receptacles. Full Load / Half
Load : 5 / 12 minutes
10.5(6U) x 17.2 x 30
@ 265 lbs
call
PPDM-HV-US-P1
103002739-6501
OPTION PW9140 PPDM-HV-US-P1,
208-240V In / 120V Out External Bypass
with IEC-C20 Input from source, and (1)
L14-30R, (6) 5-20R load receptacles
3.5(2U) x 17.0 x
23.9 @ 50 lbs
call
PPDM-HV-US-P2
103002730-6501
L5-30R, (6) 5-20R load receptacles
3.5(2U) x 17.0 x
23.9 @ 50 lbs
call
PPDM-HV-US-P3
103002731-6501
5-20R load receptacles
3.5(2U) x 17.0 x
23.9 @ 50 lbs
Eaton | Powerware Dynamic Power Protection Architecture Modular, Scalable and N+1 Enclosure Solutions
Introducing the new
Powerware® BladeUPS™
Everything your customers need in a UPS
and more competitive than the alternative.
UPS Wish List
Small investment
Big return
More power
Less space
Increased efficiency
Decreased heat
94
“Every Powerware BladeUPS
you deploy could save you more
than $6,000 a year, compared to
a competitor’s model. ...”
- Industrial Equipment News TV, April 2007
No other UPS comes close to delivering the comprehensive
range of benefits afforded by the revolutionary new Powerware
BladeUPS. This robust, compact, three-phase power protection
solution delivers industry-leading efficiency, reliability, flexibility
and power density, allowing your customers to:
• Get more power in less space.
The 12 kW modules of the Powerware BladeUPS occupy just
6U of standard rack space, including the batteries. Extend
capacity by combining modules in building-block fashion to
deliver 60 kW of redundant backup power in a single rack
enclosure — the competitive solution requires three racks!
• Reduce energy costs.
Delivering an industry-leading 97% efficiency, the Powerware
BladeUPS quickly pays for itself through energy and cooling
savings alone. On average, a user will save more than $31,000
over a five-year period, coupled with increased reliability and
performance on a 60 kVA N+1 configuration.
• Reduce cooling costs.
The unparalleled efficiency of the Powerware BladeUPS
produces cooler operating conditions and less heat dissipation, resulting in a reduction of overall air conditioning requirements by more than one-third. This allows the UPS to be
located close to equipment racks without creating hot spots.
• Easily deploy and expand.
The flexibility of the Powerware BladeUPS allows the UPS to
be deployed in numerous configurations, while its scalable
architecture enables the solution to grow with expanding IT
needs. Unlike competitive products, the Powerware BladeUPS
offers a fully redundant architecture, as opposed to simply
adding power modules to increase capacity.
Eaton® Powerware Technical Sales Support
Phone: 1.800.461.9166 ext. 3324
Email: [email protected]
Eaton, Powerware, and BladeUPS are trade names, trademarks, and/or service marks of Eaton Corporation and its subsidiaries or affiliates.
© 2007 Eaton Corporation, All Rights Reserved.
#6166 - CDN Ad.indd 1
5/31/2007 2:21:49 PM
Eaton | Powerware Dynamic Power Protection Architecture Modular, Scalable and N+1 Enclosure Solutions
All the Power, Reliability, Performance of our Mid to Large
range UPS, with added levels of customization, self service and
flexibility in deployment and for growth.
Eaton® | Powerware 9170+ N+X Single Phase
• Single Phase 9170+, N+X Modular power protection from 3 to 18kva N+1
• Modular and Scalable, add power in 3kva building blocks for capacity and/or redundancy,
slide in battery modules to scale your runtime as needed, live and on line
• True split phase power with full rated 120V legs, 120/208 or 120/240VAC
• Reliability ensured as each 3kva power module is a complete UPS containing a rectifier,
inverter, battery charger, internal bypass, and logic
• Housed in a dedicated enclosure with LCD front panel, output receptacle options, or rack
mounting kit for the 9170+ to be place inside existing enclosures
• Standard RS232 communicatins Port with (2) X-slots for optional Web/SNMP and/or
ModBus connectivity
WESCO #
79034191673
Mfr.'s Part #
ASY-0673
79034191529
ASY-0529
79034191675
ASY-0675
79034195060
0660C060AAAAAAAI
79034195090
0660C090AAAAAAAI
79034195120
0660C120AAAAAAAI
Description
9170+ 3kva / 2.5kw, 120/208-120/240 Split
Phase Power Module, occupies one slot in
enclosure
9170+ Battery Module, 2 required per
string/slot
Optional 20AMP battery Charger for long
battery runtime solutions, occupies one slot
9170+ Hardwired or L14-50P Input, 6
Slot Enclosure for 3kva expandable to
6kva N+1 or 9kva, with batteries in same
enclosure
9170+ Hardwired Input, 9 Slot Enclosure
for 9kva expandable to 12kva N+1 or
15kva, with batteries in same enclosure
9170+ Hardwired Input, 9 Slot Enclosure
for 9kva expandable to 15kva N+1 or
18kva, with batteries in same enclosure
Output
Dimensions
H x W x D (inches)
Hardwired or Input 31.5 x 17 x 25.4
Cord/Receptacle
Options available
Hardwired or Receptacle Options
available
Hardwired or Receptacle Options
available
47H x 17 x 25.4
60.7 x 17 x 25.4
BLADE UPS™, 3-Phase 60kw N+1 Modular Rack Enclosure UPS Solution
• Single Module 12kw to Multi-Module 60kw N+1 in 6U, 12kw, 3-Phase
blocks including internal batteries
• Mounts in standard industry rack enclosures, or the Eaton | Powerware
Rack Enclosures complete with Environmental Rack Monitoring
• Highest Reliability with no single point of failure, each 6U 12kw module is
it's own complete UPS with rectifier, Inverter, battery charger, logic, static
switch, parallel battery strings and internal automatic bypass switch, DC
breaker
• IGBT power electronics deliver unity power factor, > 97% efficiency, and
only 360W of heat dissipation
• Hot swappable, customer draw out, power and battery modules
• In Rack, zero U, parallel / tie bar for customer deployed and configured
parallel for capacity and redundancy options
• Quick connect Anderson plugs to engage the 12kw block to the tie Bar
• Quick Connect Anderson plug to connect to 3U, Rack Power Distribution
Module
• Single power and data drop to the UPS enclosure for easy in installation
and for Moves, adds and changes on the fly
• Eaton | Powerware Options include metered, monitored and intelligent
rack mounted PDUs and power strips and 42U, 100% welded, 16guage
rack enclosures
• EVERY DATACENTRE, RACK ENCLOSURE SOLUTION IS UNIQUE,
PLEASE CONTACT YOUR WESCO REPRESENTATIVE FOR
CONFIGURATIONS, QUOTES AND ADDITIONAL INFORMATION
95
Eaton | Powerware MID RANGE, CENTRALIZED and ZONED,
Scalable and Redundant Solutions
As the Leading manufacturer of mid-range and large UPS systems Worldwide, we offer a 45 year legacy of experience and capability in centralized UPS protection architecture.
Single Phase Mid Range: 9155 from 8kva to 45kva N+1 Multi-Module
• Centralized Power Protection for critical and sensitive equipment loads
• 8kva, 10kva, 12kva or 15kva in a single module with internal battery
• Powerware Hot Sync™ paralleling of multiple modules for redundancy or extra capacity up to 45kva N+1
• High Power density and efficiency; Input 0.99pf, Output 0.9pf in a 12" wide cabinet
• True Split Phase power with 180 or 120 degree phase displacement; 120/240 - 120/208VAC
• Options include rear or wall mounted bypass, output Power Distribution Module with a host of plug receptacles,
and extended battery runtime cabinets
Three Phase Mid Range: 9355 from 10kva to 90kva N+1 Mulit-Module
• Centralized Power Protection for critical and sensitive equipment loads
• Single Module 10 to 15kva in a 12.8" wide Cabinet, or 20 to 30kva single module in a 20" wide cabinet, including
internal battery and built-in bypass switch
• Powerware Hot Sync™ paralleling of multiple modules for redundancy or extra capacity, up to 4 units in a 3 for
capacity and 1 for redundancy scheme
• High Power density and efficiency; with IGBT power electronics boosting: Input 0.99pf, Output 0.9pf, and < 5%
Input THD
• True Split Phase power with 180 or 120 degree phase displacement; 120/240 - 120/208VAC
• Options include wall mounted bypass, wall mounted tie cabinet with MBP, and extended battery runtime cabinets
Three Phase Enterprise, Facility Class: 9390 80kva and 160kva Product Family
96
• The Power, Performance, Reliability and Efficiency to protect your DataCentre
• Fully integrated IGBT power transistors in both the rectifier and inverter for < 4.5% Input THD at a 0.9pf output
and 94& efficiency with no compromise
• Powerware Hot Sync™ paralleling of multiple modules for redundancy or extra capacity, up to 4 units in a 3 for
capacity and 1 for redundancy scheme
• Native 208V transformless design with optional voltages available, External bypass, parallel for capacity and
redundancy, Integrated distribution Cabinets and Remote Power Panels
• Variable DC Buss that can provide an exact match to a customer's required runtime
• Smallest footprint, lightest weight, front access only makes installation and maintenance quick and easy
9115
9355
9390 80kva
9390 160kva
For the past 30 years, Electron Metal has been at the forefront as a leader in the design and manufacture of
quality sheet metal products
Our broad array of standard cabinets, racks, consoles and enclosures are second to none. We serve the
communications, broadcast, security and electronic marketplace. In addition, Electron Metal specializes in custom
manufacturing and can tailor their products to your requirements.
For more information, please visit their website at www.electronmetal.ca
The Series 2000 Cabinet
The Series 2000 Cabinet is our most popular model. By using efficient production methods, this cabinet can be
delivered in a short period of time and still lives up to Electron Metal ’s high quality standards. This enclosure
offers easy access for equipment installation, as well as a wide variety of accessories that allow for multiple
configurations.
Features
• Series 2000 frame, fully welded assembly
• 2 Adjustable pair of Panel Mounting Angles, tapped 10-32 at EIA spacing
• Front door with tinted acrylic insert and lock
• Louvered rear door with lock
• Flush mount side panels
• Open base
• Top cover with provisions for fans & blanking plates
• Set of leveling feet
WESCO #
69982810016
69982810018
69982810020
69982810750
69982810752
69982810754
69982813186
69982813188
69982813189
Mfg.#
EM-19-70/30CKIT-GY
EM-19-77/30CKIT-GY
EM-19-84/30CKIT-GY
EM-19-70/36CKIT-GY
EM-19-77/36CKIT-GY
EM-19-84/36CKIT-GY
EM-19-70/42CKIT-GY
EM-19-77/42CKIT-GY
EM-19-84/42CKIT-GY
External Dimensions Useable Dimensions Description
22’’W x 76’’H x 30’’D
22’’W x 83’’H x 30’’D
22’’W x 90’’H x 30’’D
22’’W x 76’’H x 36’’D
22’’W x 83’’H x 36’’D
22’’W x 90’’H x 36’’D
22’’W x 76’’H x 42’’D
22’’W x 83’’H x 42’’D
22’’W x 90’’H x 42’’D
19”W x 70”H x 28.75’’D
19”W x 77”H x 28.75’’D
19”W x 84”H x 28.75’’D
19”W x 70”H x 34.75’’D
19”W x 77”H x 34.75’’D
19”W x 84”H x 34.75’’D
19”W x 70”H x 40.75’’D
19”W x 77”H x 40.75’’D
19”W x 84”H x 40.75’’D
Cabinet Kit 40RUx30 D
Cable Management Cabinet Kit
Features
• Extra wide frame allows more room for cabling
• Includes 2 vertical cable management and 2 pairs special Panel Mounting Angles (19”
rack mount)
• Front door with tinted acrylic insert and lock
• Rear louvered door with lock
• Top cover with provisions for fans or cables
• Flush mount side panels
• Set of levelling feet
• Many sizes available – see www.electronmetal.ca
WESCO #
Mfg.
69982810756 EM-23-70/30MKIT-GY
External Dimensions Useable Dimensions
26’’W x 76’’H x 30’’D
23”W x70”H x 28.75’’D
69982810204 EM-23-77/30MKIT-GY
26’’W x 83’’H x 30’’D
23”W x77”H x 28.75’’D
69982810758 EM-23-84/30MKIT-GY
26’’W x 90’’H x 30’’D
23”W x84”H x 28.75’’D
69982810760 EM-23-77/36MKIT-GY
26’’W x 83’’H x 36’’D
23”W x77”H x 34.75’’D
69982810762 EM-23-84/36MKIT-GY
26’’W x 90’’H x 36’’D
23”W x84”H x 34.75’’D
69982813192 EM-23-77/42MKIT-GY
26’’W x 83’’H x 42’’D
23”W x77”H x 40.75’’D
69982813194 EM-23-84/42MKIT-GY
26’’W x 90’’H x 42’’D
23”W x84”H x 40.75’’D
Description
Cable Mgmnt Cab
Kit 40RUx30 D
Cable Mgmnt Cab
Kit 44RUx30 D
Cable Mgmnt Cab
Kit 48RUx30 D
Cable Mgmnt Cab
Kit 48RUx36 D
Cable Mgmnt Cab
Kit 48RUx36 D
Cable Mgmnt ab
Kit 48RUx36 D
Cable Mgmnt Cab
Kit 48RUx36 D
Other configurations and depths are available
97
XW-3000
Extra Wide Frame For Cabling
Includes Large Capacity Cable Management
Different Configurations Available
The XW-3000 Cabinet is our latest model of cable management enclosures. With
its extra-wide 30 ”frame, it has room to spare. It includes large capacity cable
management and pre-installed 19 ”Panel Mounting Angles to facilitate your installations.
Other sizes are available, please see www.electronmetal.ca
Features:
•
•
•
•
•
•
•
2 Pairs of 19” Panel Mounting Angles with cable holes along front
Pair of large capacity cable managements
Front acrylic door with lock
Rear louvered door with lock
Solid top with 6 fan cutouts
Pair of locking flush mount side panels
Set of leveling feet
WESCO #
Mfg. #
Overall Dimensions
Useable Dimensions
Description
69982810500
EM-30-77/30XW30-GY
30’’W x 83’’H x 30” D
27”W x 77”H x 28.75’’D
Cabinet Kit 44ru 30’’D
69982810764
EM-30-77/36XW30-GY
30’’W x 83’’H x 36” D
27”W x 77”H x 34.75” D
Cabinet Kit 44ru 36’’D
Other configurations and depths are available
98
Seismic Cabinets
Rugged, Heavy-Duty Steel Frame
Wide Body Provides Ample Space For Cables
Tested And Compliant to BELLCORE GR-63-CORE Specifications
The Zone 4 cabinet is our most economical Seismic cabinet, yet it still fully
complies with BELLCORE GR-63-CORE standards for static deflection and vibration
resistance cabinet is built around a rugged welded steel frame, with removable side
panels, front and rear doors, and aluminum trim for a high tech look
Zone 4 Cabinet Features:
• Heavy-duty steel construction
• Tested and approved to BELLCORE GR-63-CORE specifications
• Provisions for up to 9 fans for maximum ventilation and cooling
• Provides security for equipment
• 19 ”and 23 ”rack mount available
WESCO #
Mfg. #
Usable Dimensions
Description
69982810768
EM-26-83/30Z4KT-GY 26’’W x 83’’H x 30’ D
Overall Dimensions
19”W x 77”H x 28.75’’D
Zone 4 Cabinet kit 44RU 30’’ D
69982810770
EM-26-88/30Z4KT-GY 26’’W x 88’’H x 30’’D
19’’W x 82.25’’H x 28.75’’D
Zone 4 Cabinet kit 43RU 30’’D
69982810772
EM-30-83/30Z4KT-GY 30’’W x 83’’H x 30’ D
23”W x 77”H x 28.75’’D
69982810774
EM-30-88/30Z4KT-GY 30’’W x 88’’H x 30’ D
23”W x 82.25’’H x 28.75’’D
Series 700 Relay Racks
This heavy-duty rack is perfect for installations that require minimum space and
maximum versatility. Our Series 700 relay racks can be equipped with a variety
of options like shelves and cable managements, as well as all your complex
equipment. They can even be ganged together when many racks are used side by
side, for a clean and uncluttered look.
Features:
•
•
•
•
Fully welded frame made from 12 ga.steel
Base plates are made from 5/16 ”thick,4 ”x 6 ”steel angles
Rack is designed to be bolted to the floor
Holes tapped 10-32 at standard EIA spacing on front or both
front and rear of the uprights
• Sides of rack feature holes to mount cable management
accessories or to gang racks together
• Other sizes available, please visit www.electronmetal.ca
WESCO #
Mfg.#
External Dimensions Usable Dimensions Description
69982810487 EM-19-42/700RR1-BK 20.5’’W x 47.625’’ H
19’’W x 42’’ H
Series 700 Relay rack EIA holes 1 side
69982810531 EM-19-77/700RR1-BK 20.5’’W x 82.625’’ H
19’’W x 77’’ H
69982810533 EM-19-84/700RR1-BK 20.5’’W x 89.625’’ H
19’’W x 84’’ H
69982810489 EM-19-42/700RR2-BK 20.5’’W x 47.625’’ H
19’’W x 42’’ H
69982810535 EM-19-77/700RR2-BK 20.5’’W x 82.625’’ H
19’’W x 77’’ H
69982810537 EM-19-84/700RR2-BK 20.5’’W x 89.625’’ H
19’’W x 84’’ H
Zone 4 Relay Racks
Our Zone 4 relay rack is our heaviest duty model. Designed with the highest
degrees of rigidity, quality and refinement in mind, these racks were engineered to
the strictest quality standards. With fully welded steel construction, these racks are
designed, tested and certified to be BELLCORE GR-63-CORE compliant. Ideal for
environments that experience high shock or vibration, such as seismic areas. The
rack features extra-heavy duty construction, tapped mounting holes along the front
and rear, and a large bolt down base.
Features:
• Ultra-heavy duty welded 11 ga.steel construction
• Heavy duty 6 1 /2 ”x 3 ”side channels for maximum rigidity
• Extra welds provide superior strength
• Large, bolt down base
• Mounting holes tapped 10-32 at standard
EIA spacing on front and rear
• Rack accepts cable management accessories
• Available in 19 ”or 23 ”rackmount sizes
WESCO #
Mfg.#
External Dimensions
Usable Dimensions
Description
69982810777
EM-19-77/ZN4RR2-BK
24’’W x 84’’H
19’’W x 77’’ H
Zone 4 relay rack EIA holes 2 side
69982810779
EM-23-77/ZN4RR2-BK
24’’W x 84’’H
19’’W x 77’’ H
Zone 4 relay rack EIA holes 2 side
99
Reversed Wall Mount Cabinets
Our reversed Wall Mount Cabinet is similar to our standard wall mount cabinet, but
its layout is reversed. The 4 ”rear section is fixed to the wall, allowing equipment to
be mounted inside the deep mid section. This cabinet also includes a locking front
acrylic door, cable entry cutouts on the rear sections and fan cutouts for optional
ventilation fans. The cabinet also has a pair of adjustable panel mounting angles to
accommodate various equipment.
Features:
• Fully welded 14 ga.steel construction
• Top and bottom cutouts for fans or
cable entry
• Locking front acrylic door
• Locking swing out mid section
• Optional louvers on sides
• Adjustable panel mounting angles
• Cabinet may be inverted to allow either
left or right side opening
• Extra deep frame for large equipment
• Many sizes available please see
www.electronmetal.ca
• 19 ”or 23 ”rackmount
WESCO #
Mfg.#
External Dimensions
Usable Dimensions
Description
69982810753
EM-19-21/24WMCS-BK
22’’W x 24’’H x 24’’
19”W x 21”H x 20”D
Wall Mount Cabinet 12RU
69982811055
EM-19-28/24WMCS-BK
22’’W x 31’’H x 24’’
19”W x 28”H x 20”D
69982813089
EM-19-36/24WMCS
22’’W x 39.75’’H x 24’’
19”W x 36.75”H x 20”D
100
Swing Out Wall Mount Relay Rack
This heavy-duty rack was designed to be mounted on a wall. It allows easy
swing-away access to the rear of your equipment. This rack features bolt-together
construction for easy installation. Rack can hold up to 150 lbs of equipment and can
be installed to pivot either left or right. Includes cable entry cutouts on top and base
to allow cable access. Available in two different heights to suit your requirements.
Features:
• Easy bolt-together construction
• Heavy duty base and top
• Reversible design
• Accepts 19 ”rackmount equipment
• Heavy load capacity
• Cable entry cutouts on top &bottom for
heavy duty model
• Various sizes available, details at
www.electronmetal.ca
WESCO #
Mfg.#
External Dimensions
Usable Dimensions
Description
69982810721
EM-19-21/25SRHD-BK
20’’W x 28.625’’H x 25’’
19”W x 21”H x 25.5”D
Swing out rack
12RU Heavy Duty
69982810723
EM-19-35/25SRHD-BK
20’’W x 42.625’’H x 25’’
19”W x 35”H x 25.5”D
Swing out rack
20RU Heavy Duty
69982810715
EM-19-21/18SWRR-BK
20’’W x 28.625’’H x 18’’
19”W x 21”H x 18”D
Swing out rack
12RU Light Duty
69982810719
EM-19-35/18SWRR-BK
20’’W x 28.625’’H x 18’’
19”W x 21”H x 18”D
Swing out rack
20RU Light Duty
Wall Mount Brackets
Electron Metal offers a wide variety of wall mount brackets. These are used when
smaller equipment is required to be mounted on a wall, such as patch panels and
other small equipment. Ideal for use in office networking rooms. Brackets come with
either one or two hinges, for easy access to the rear of equipment. Each bracket
includes a cable entry hole on rear; cable tie down lancings, and rails tapped 10-32
at standard EIA spacing. Available in 19 ”rackmount only, fixed or adjustable depth.
Features:
•
•
•
•
• Availablity of single or double hinges
• Adjustable depth model also available
• Accepts 19 ”equipment
• Large variety of models and sizes 2U to 8U high.
Adjustable Depth Model also available.
Light weight, sturdy construction
Pre-punched holes for wall mounting
Large cable access cutout on rear
Includes many cable tie-down lancings
WESCO #
Mfg.#
Dimensions
Description
69982810637
EM-19-8U/ADWBH2-BK
19”W x 14”H x 8” to 14’’D
Adjustable depth wall mount bracket 8U double hinged
69982810784
EM-19-8U/6WBHD2-BK
19”W x 14”H x 6’’ D
Wall mount bracket 8U x 6” deep double hinged
69982810630
EM-19-8U/14WMH2-BK
19”W x 14”H x 14’’ D
Wall mount bracket 8U x 14” deep double hinged
Other wall mount supports:
Mfg.#
Dimensions
Description
EM-19-4U/HUBWMS
19”W x 7”H x 8-14’’ D
Adjustable depth wall mount bracket 4U with adjustable bottom shelf
EM-19-WM/4X12
19”W x 3.5 ( 2RU)
Wall mount bracket face up model 2U
EM-19-WM/575
19”W x 5.25 ( 3RU)
EM-19-WM/11X11
19”W x 10.5 (6U)
Fixed Shelves
Front mount shelf
Center mount shelf
When assembling your cabinet, certain equipment may not be rack-mountable and
will have to be placed upon a shelf. Our standard fixed shelves provide a very stable
platform for all your equipment. They are also ideal for monitors, servers or just
about anything that will not bolt directly to the cabinet rails. All are made from 16
ga.steel. Shelves are available in many different styles to meet your requirements.
Fixed shelves, sliding shelves and drawers, keyboard shelves, even heavy duty
shelves are available. This is just a small sample of the numerous shelves we offer.
Please visit our website for more details. www.electronmetal.ca
WESCO #
69982810245
69982810247
69982810249
69982810269
69982810271
69982810273
Mfg. #
EM19-16/FMSH-BK EM19-18/FMSH-BK
EM19-20/FMSH-BK EM19-16/CMSH-BK
EM19-18/CMSH-BK
EM19-20/CMSH-BK
Dimension
19"W x 16"D
19"W x 18"D
19"W x 20"D
19"W x 16"D 19"W x 18"D
19"W x 20"D
Description
Front mount shelf
Front mount shelf
Front mount shelf
Center mount shelf,
Center mount shelf
Center mount shelf
101
Cable Management for Relay Racks
Rackmount horizontal
cable management
Top cable management
102
Vertical cable management
Electron Metal offers many different Cable management solutions for our
relay racks. You may choose from side mounted vertical cable managers,
or a top mounted horizontal cable manager. Our rackmount cable
management lets you manage your cables horizontally throughout your
cabinets or relay racks. There is a solution to any cabling project! More
styles and sizes available on our website www.electronmetal.ca.
WESCO #
Mfg.#
Dimensions
Description
69982810579
EM-05-06/77CT-BK
5’’W x 6’’D x
77’’ H
for series 700 relay rack
69982810581
EM-05-06/84CT-BK
5’’W x 6’’D x
84’’ H
69982810583
EM-07-06/77CT-BK
7.5’’W x 6’’D
x 77’’ H
69982810585
EM-07-06/84CT-BK
7.5’’W x6’’D
x 84’’ H
69982810587
EM-10-06/77CT-BK
10’’W x 6’’D
x 77’’ H
69982810589
EM-10-06/84CT-BK
10’’W x 6’’D
x 84’’ H
69982810653
EM-05-06/30TCT-BK
5’’W x 6’’D
x 84’’ H
Top cable management for
series 700 relay rack
For EM-05-06/77CT
69982810597
EM-19-2U/HCMS-BK
19’’W x 3.5H
x 3’’ D
Rack mount horizontal cable
manager 2U
69982810601
EM-19-4U/HCMS-BK
19’’W x 7.5H
x 3’’ D
Rack mount horizontal cable
manager 4U
Partners in delivering quality
products at a competitive price.
DTX CableAnalyzer™ Series
Significantly reduce total time to certify with 12-second Cat 6 Autotest, Level IV
Accuracy, 900 MHz, DTX CableAnalyzerTM Series and intuitive troubleshooting.
DTX - It's all about time!
•Exceeds spec requirements for Cat 5e/6/7 with superior Level IV accuracy
•Three times faster than existing testers with 12-second Cat 6 Autotest
•Advanced time-saving diagnostics pinpoints fault and suggests corrective actions
•900 MHz future-proofs your investment for future applications such as 10 Gigabit
Ethernet, Class F and CATV
•Resident fiber modules lets you switch between copper and fiber with the push of
a button
• Fast, reliable, and rugged with extended 12-hour battery life and color display all
enhance user productivity
• All models can be upgraded to the high-end performance model
• DTX significantly reduces total certification costs by as much as 33% a year
WESCO #
Mfg. #
Description
75408202620
DTX-1800 DTX-1800
CableAnalyzer
Ultimate performance in a future-proof investment – test capabilities to 900 MHz, and
industry leading Autotest execution times - 12Second for a Cat 6 link
75408202703
DTX-1200 DTX-1200
CableAnalyzer
Revolutionized performance and value for Cat
6/5e certification – test capabilities up to 350
MHz, and industry leading Cat 6 Autotest in 12
seconds
75408202183
DTX-LT DTX-LT
CableAnalyzer
Improved performance in an entry-level model
– test capabilities up to 350 MHz, and impressive Cat 6 Autotest in 30 seconds
75408202963
GLD-DTX
1 YEAR SUPPORT
75408203111
GLD-DTX-REN
1 YEAR SUPPORT Renewal
DTX Compact OTDR
The DTX Compact OTDR is a full featured Optical Time Domain Reflectometer
(OTDR) module that snaps onto the Fluke Networks DTX CableAnalyzer.
It makes the DTX powerful certification tool a complete, easy-to-use OTDR
that shoots and analyzes traces on singlemode and multimode fiber. The
DTX Compact OTDR module makes every technician a fiber expert with
unparalleled ease of use, automatic OTDR settings, loss limits for events and
fiber links, launch fiber compensation, automatic event analysis, and results
management - all with the familiar user interface of the DTX CableAnalyzer.
WESCO #
75408205765
Mfg. #
Description
DTX-QUAD-OTDR*
DTX-1800 QUAD OTDR Kit
Includes DTX-1800 Cable Analyzer mainframe and DTX comapct
OTDR
* Includes up to one pair of interface adapters and one pair of personality
modules per year.
103
Certification & Documentation
OptiFiber® Certifying OTDR
The first OTDR to integrate troubleshooting and certification for LANs.
• Test, troubleshoot and certify fiber with Auto OTDR analysis, ChannelMap™,
loss length certification and 250X/400X fiber end-face inspection.
• Take the complexity out of testing and troubleshooting with an OTDR that every
technician can use
• Certify fiber to industry and customer requirements with a single tool
• Increase productivity from day one with the most easy to use OTDR
• Get the most complete picture of connection-rich fiber networks
• Analyze test results and create professional test reports using LinkWare
reporting software
WESCO #
Mfg. #
Description
09596911174
OF-500-01
OptiFiber Multimode OTDR includes Mainframe, Multimode OTDR module, Standard
accessories and 62.5 µm launch fiber
75408204138
OF-500-01/50M
OptiFiber Multimode OTDR includes Mainframe, Multimode OTDR module, Standard
accessories and 50 µm launch fiber
09596911175
OF-500-02
OptiFiber Advanced Multimode OTDR includes Mainframe, Multimode OTDR Module
with Optical Power Meter,Standard accessories, Protective carry case and 62.5 µm
launch fiber
75408204378
OF-500-03
OptiFiber Singlemode OTDR. OptiFiber
OTDR includes Mainframe, Singlemode
OTDR module, Standard accessories and
launch fiber.
104
Cable IQ
CableIQ is the first qualification tool designed for network technicians who
need to troubleshoot connectivity problems and qualify cabling bandwidth.
It detects speed/duplex settings of attached switches and PCs.
• Sees if your existing cabling can support voice, VoIP, 10/100/Gigabit
Ethernet
• Troubleshoots why existing cabling plant can’t support the desired
network bandwidth
• Discovers what’s at the end of any cable and displays device
configuration (speed/duplex/pairing)
• Frees-up switch ports and identifies unused links
• Graphically maps wiring configuration and shows distance to faults with
Intelligent Wiremap
• Tests all copper cabling media: twisted-pair, coax, and audio cabling
• Locates and traces cable with IntelliTone™ digital signaling technology
WESCO #
Mfg. #
Description
75408202260
CIQ-100
CableIQ Qualification Tester
Includes CableIQ with remote adapter, soft carrying case and four AA batteries
75408203196
CIQ Kit
CableIQ Advanced IT Kit
Includes CableIQ with remote adapter, IntelliTone 200 Probe, six remote office IDs, rugged
carrying case and four AA batteries
Certification & Documentation
MicroScanner2 Cable Verifier
Next generation MicroScanner provides revolutionary streamlining to
voice/data/video testing. Displays available services (10/100/1000
Ethernet, POTS, PoE), length, wiremap, cable ID, and distance to fault on
one screen.
• Displays cable length, wiremap, cable ID, and distance to fault on one
screen
• Detects today’s media services, including 10/100/1000 Ethernet, POTS,
and PoE
• Locates virtually any cable or wire pair with IntelliTone digital and analog
toning
• Tests all common media types, including RJ11, RJ45, Coax, with no
adapters
• Rubber over mold enhances grip and increases ruggedness
• “Oversized” backlit LCD makes results crystal clear in any work
environment
WESCO #
Mfg. #
Description
75408205436
MS2-100
MicroScanner2 Cable Verifier
SimpliFiber Optical Loss Test Kits
Fluke Networks’ SimpliFiber Optical Loss Test Kits provide all the tools
you need to verify proper installation and maintain optical fiber cabling
infrastructure in one protective carrying case. Variety of kits contain
simple and effective tools for measuring loss and power levels, locating
faults and polarity issues and inspecting connector endfaces.
• Tests singlemode and multimode links
• Verify system loss and power levels at 850nm, 1300nm, 1310nm,
1550nm with Simplifiber Power Meter and Sources
• Inspect connector endfaces at 200X magnification with FT120 Fiber
Viewer
• Locate cable faults, polarity and connector problems with VisiFault VFL
• Convenient carrying case provides protection and easy transport for all
your verification tools
• Copper and fiber troubleshooting tools for network technicians in one
handy kit.
WESCO #
Mfg. #
Description
75408204148
FTK-400
Complete Fiber Verification Kit
75408204149
FTK-300
Multimode Fiber Verification Kit
75408204150
FKT-150
Basic Fiber Verification Kit
75408204147
CIQ-FTK
Fiber & Copper Technician Kit
105
FiberInspector™ Mini Video Microscope
Use FiberInspector™ Mini to examine installed fiber terminations or ensure
terminations are smooth and clean. Avoid the #1cause of cause of fiber link failure:
dirty end-faces.
• 200x magnification probe enables inspection of both multimode and singlemode
end-faces inside ports and on patch cords
• Miniature display boasts an exceptionally sharp 1.8” screen
• Troubleshooting is 10 times faster than with traditional scopes
• Grip trigger activation extends battery life
• Various probe adapter tips allow for inspection through many different connector
port types
WESCO #
75408205582
106
Mfg. #
FT500
Description
Fiberinspector Mini Video Microscope. Includes fiber probe
and display, AC adapter/battery charger, probe adapter tips
(ST, SC and universal 2.5mm patch cord tip) and soft carrying case).
TS 90 Cable Fault Finder
This easy-to-use, competitively priced tester is three tools in one -- a fault
locator, a cable and wire manager and a tone generator with SmartTone™
technology. Easily find the distance to opens or shorts on electrical wire,
telephone wire, security wire and coax.
• Works on any two or more conductor cable up to 2,500 feet (762
meters)
• Instantly measures distance to open or any fault from one end of any
cable pair
• Patented SmartTone™ tone generator positively identifies pair
• Measures cable distance on spool
• Measures constantly while "On"
• Displays distance reading rather than waveform
• High voltage detection
• Moisture proof
• Additional line cord options available for coaxial cable (F-connectors)
and other applications
WESCO #
75408203907
Mfg. #
Description
26500090
TS90 cable fault finder with BNC to alligator clips
LAN Testers
NetTool™ Series II PRO VoIP - Inline Network Tester
Isolate and document network device and application connectivity issues in seconds
with NetProve™ diagnostics. Connect inline to see network traffic and solve VoIP
and PoE problems fast.
• NetProve™ diagnostics – isolate device and application connectivity issues in
seconds
• Quickly resolve and document network problems with powerful inline visibility into
10/100/Gig links between switches, PCs, IP phones and other devices
• Connect inline for visibility into VoIP calls to quickly diagnose IP phone boot-up
and call control problems and to measure key call quality metrics
• Verify readiness of PoE systems and troubleshoot PoE device problems
• IntelliTone™ digital cable location and isolation technology speeds cable
troubleshooting
WESCO #
Mfg. #
Description
75408204341
NTS2-PRO
10/100/1000 inline testing, VoIP application,
NetProve, PoE, IntelliTone toning, reporter
75408204210
NTS2-VOIP
10/100 inline testing, VoIP application, reporter
75408205323
NTS2-VOIP-OPT
VoIP option to upgrade a NTS2-PRO to NTS2VOIP. Upgradeable by the customer via a key
code and the NetTool Connect software
LinkRunner Pro Network Multimeter
Network link tester resolves a broader range of today’s connectivity
problems. Verifies link at 10/100/Gig, pings up to 10 key devices, detects
PoE, resolves 802.1X security conflicts.
• Link at 10/100/Gig – identify device capabilities and confirm actual
speed/duplex status
• Ping key devices – measure response of DHCP, router, DNS, and other
devices or URLs
• Verify 802.1X settings – authenticate with EAP type, user name,
certificates, and password
• Detect PoE service – verify voltage level, and pairs to IEEE 802.3af
specifications
• Identify switch port – supports Cisco, Extreme, and IEEE Link Layer
Discovery Protocols
• Test cable wiremap – measure length; detect miswires, shorts, split pairs
or opens
• Locate and ID cable – use IntelliTone or optional IDs to locate cables at
patch panels
• Document results – upload link status reports with USB port for faster
problem resolution
WESCO #
Mfg. #
Description
75408204441
LRPRO-1000
LinkRunner Pro Network Multimeter
75408205148
LRPRO-KIT
LinkRunner Pro Extended Test
Kit
75408202691
WIREVIEW 2-6
Wireview Cable ID Set # 2-6
09596913303
CLIP-SET
RJ-45 to Eight Alligator Clip
Adapter
107
Installation Tools
JackRapid™ Punchdown Tool
JackRapid™ is a patented jack termination tool that saves time and
increases accuracy by seating and terminating all wires at once with a
simple squeeze of the handle
• Cuts installation time - easy to use handle, seats and cuts all wires at
once, saving you up to 2 minutes installation time per jack!
• High quality terminations - no more compromised connections and
wasted jacks.
• Simple, one handed operation reduces hand fatigue.
• Unique design easily accommodates close-to-wall installation - no
slack, no problem.
• Replaceable blade head for use with multiple jack types.
108
WESCO #
Mfg. #
75408203760
10059600
JackRapid punchdown tool (for Leviton 41106, 41108, 5G108)
Description
75408204002
10059620
JackRapid punchdown tool (for Leviton 5G110, 61110, 6110G)
75408203685
10059630
JackRapid punchdown tool (for SYSTIMAX M1BH, C5, MPS100E, and Uniprise
jacks: UNJ300, UNJ500, UNJ600)
75408204004
10059640
JackRapid punchdown tool (for SYSTIMAX MGS400, MGS500, MFP420,
MFP520)
TS®40 Test Set Series
The TS40 Series Test Set feature include two-way hands-free amplified
speakerphone, advanced testing functions include low/high voltage and
low (mA) current indications. The TS44 DLX Test Set includes data
lockout and lockout override.
• DataSafe™ operation with Superior High Impedance Monitor
• Advanced testing functions for low/high voltage and low (mA) current
• Always-on Monitor Mode
• High fidelity, 2-way speakerphone for true hands-free conversations.
•TS®44 includes Data Lockout, Lockout Override and DSL/POTS filtering
WESCO #
Mfg. #
Description
75408203959
44801009
TS44DLX test set with ABN
75408203958
44801004
TS44DLX test set with 346A plug
75408203938
42801009
TS42DLX test set with ABN
75408203937
42801004
TS42DLX test set with 346A plug
Installation Tools
ProTool Kits™
All the professional tools you need (in one pouch) to cut, strip, clean
and connect network phone and data lines to blocks and jacks.
IS60 Pro-Tool™ Kit
• D914S™ Impact Tool
• Electrician's D-Snips
• Cable Stripper
• Mini Maglite
• Dur-a-Grip™ Pouch
IS50 Pro-Tool+B24Kit
• D914S™ Impact Tool
• Electrician's D-Snips™
• Cable Stripper
• EverSharp™ 66/110 Cut Blade
• Dur-A-Grip™ Pouch
• D®814 Impact Tool
• Cable Stripper
• EverSharp™ 66/110 Cut Blade
• Probe Pic
• Electrician's D-Snips
• Cable Knife
• Mini Maglite
• Dur-A-Grip Pouch
• Cable Knife
WESCO #
Mfg. #
Description
75408203822
11293000
IS60 ProTool Kit
75408203820
11292000
IS50 ProTool Kit
75408203818
11291000
IS40 ProTool Kit
75408203825
11295000
IS25 ProTool Kit
75408203827
11296000
IS15 ProTool Kit
D914 Impact Tool
Fluke Networks D914 Impact Tools provide quality termination
on the first punch. Accepts all industry standard blades.
WESCO #
Mfg. #
75408203728
FE10051100 10051100
D914 Impact Tool W/66 Blade
Description
75408203729
FE10051110 10051110
D914 Impact Tool W/110 Blade
75408203730
FE10051120 10051120
D914 Impact Tool W/66 & 110 BL
75408203731
FE10051200 10051200
D914 Screwdriver Blade
75408203732
FE10051300 10051300
D914 Adapter Blade
75408203733
FE10051501 10051501
D914 W/110/66/extra BL
75408203727
109
Category 6 and 6A Solutions
NETWORK CONNECTIVITY GROUP
TX 6000™ Category 6 UTP Cable
Category 6 Riser and Plenum Cable. Conductors are 23 AWG construction.
The conductors are twisted in pairs with four pairs contained in a flame
retardant PVC jacket. Cable Colour – Blue.
Category 6 Riser is FT4 rated and Category 6 Plenum cable is FT6 rated.
Category 6 Riser Cable
WESCO #
Mfg. #
07498384023
PUR6004BU-UY
Category 6 Plenum Cable
WESCO #
Mfg. #
07498384029
PUP6004BU-U
TX6X™ Category 6A 10GIG™ UTP Cable
Category 6A Riser and Plenum Cable. Conductors are 23 AWG
construction. The conductors are tightly twisted in pairs and all four pairs
are placed in a flame retardant PVC jacket. Category 6A Riser is FT4 rated
and Category 6 Plenum cable is FT6 rated.
Category 6A Riser Cable WESCO #
Mfg. #
07498305864
PUR6X04BU-UY
Category 6A Plenum Cable
WESCO #
Mfg. #
07498300011
PUP6X04IG-U
Mini-Com™ TX6™ PLUS Category 6 Jack Module
110
Category 6, RJ45, 8 position, 8 wire universal module. Off white termination
cap designates Category 6 PLUS performance and provides a positive
strain relief, helps control cable bend radius and securely retains wires.
WESCO #
07498339544
07498339546
07498339547
07498339548
07498339550
07498339540
07498339553
07498339554
Mfg. #
CJ688TGBL
CJ688TGBU
CJ688TGEI
CJ688TGGR
CJ688TGIW
CJ688TGRD
CJ688TGWH
CJ688TGYL
Colour
Black
Blue
Electrical Ivory
Green
International White
Red
White
Yellow
Mini-Com™ TX6™ Category 6A 10GIG™ UTP Jack Module
Category 6A, RJ45, 8-position, 8-wire universal module. Off White termination
cap designates 10GIG™ Category 6 performance and provides a positive
strain relief; helps control cable bend radius and securely retains wires
WESCO #
07498301099
Mfg. #
CJ6X88TGIW
Colour
Off White
For module colours other Off White, replace IW with EI(Electric Ivory), WH (White), IG (International Gray),
BL (Black), OR (Orange), RD (Red), BU (Blue), GR (Green), YL (Yellow) or VL (Violet)
Mini-Com™ TX6™ PLUS Patch Panel Kits
Supplied with black Mini-Com™ TX6™ PLUS Jack modules
Mini-Com™ Modular Patch Panel Kits
Mini-Com™ Patch Panel Kits - with Labels
WESCO #
Mfg.#
Desc.
WESCO #
Mfg. #
Desc.
07498383923
CPPKA6G24WBL
Angled
07498382128
CPPKLA6G24WB
Angled
07498383924
CPPK6G24WBL
Flat
07498382127
CPPKL6G24WBL
Flat
Category 6 and 6A Solutions (continued)
DP6™ Category 6A 10GIG™Patch Panels
Category 6A, RJ45, 8-position with 8-wire ports. Utilizes 110 punchdown
termination on back panel and includes retention cap for each port
Flat Patch Panels
WESCO # Mfg. #
07498303707
DP246X88TGY
07498303711
DP486X88TGY
Angled Patch Panels
WESCO # Mfg. #
07498303716
DPA246X88TGY
07498303719
DPA486X88TGY
TX6™ PLUS Category 6 Patch Cords
Patch Cords for use with TX6™ Modules and DP6 Patch Panels. Features
next generation stranded cable and enhanced performance modular plugs
for superior performance.
WESCO #
07498317045
07498317129
07498316893
Mfg. #
UTPSP3BUY
UTPSP7BUY
UTPSP10BUY
Description
3ft Blue
7ft Blue
10ft Blue
xSubstitute 3, 5, 7, 10, 14 or 20 for length of patch cord (in feet). **Standard cable colour
is Off White, substitute for other colours add BL(Black), BU(Blue), GR(Green), RD(Red),
YL(Yellow), OR(Orange), VL(Violet) before the Y.
TX6™ Category 6A 10GIG™ Patch Cords
Constructed of TX6™ 10GIG™ 24 AWG solid copper cable and TX6™
PLUS Modular Plugs for superior performance.
Mfg. #
UTP6Xx*Y
xSubstitute 3, 5, 7, 10, 14 or 20 for length of patch cord (in feet). **Standard cable colour
is Off White, substitute for other colours add BL(Black), BU(Blue), GR(Green), RD(Red),
YL(Yellow), OR(Orange), VL(Violet) before the Y.
For example, the part number for a blue cord 10 feet is UTPSP10BUY
Category 5e Solutions
TX 5500 ™ Category 5e UTP Cable
Category 5e Riser and Plenum Cable. Conductors are 24 AWG
construction. The conductors are twisted in pairs with four pairs contained
in a flame retardant PVC jacket. Cable Colour – White
Category 5e Riser Cable
WESCO #
Mfg. #
07498384446
PUR5504WH-UY
Category 5e Plenum Cable
WESCO #
Mfg. #
07498384447
PUP5504WH-UY
For additional colours please contact Customer Service.
Mini-Com™ TX5e ™ Module
8 position, 8 wire universal module. Termination cap is colour coded for
T568A and T568B wiring schemes.
WESCO #
074983 39522
074983 39524
074983 39525
074983 39526
074983 39527
074983 39528
074983 39529
074983 39531
074983 39536
074983 39538
074983 39539
Mfg. #
CJ5E88TGBL
CJ5E88TGBU
CJ5E88TGEI
CJ5E88TGGR
CJ5E88TGIG
CJ5E88TGIW
CJ5E88TGOR
CJ5E88TGRD
CJ5E88TGVL
CJ5E88TGWH
CJ5E88TGYL
Colour
Black
Blue
Electrical Ivory
Green
Gray
International White
Orange
Red
Violet
White
Yellow
111
Category 5e Solutions
(continued)
Mini-Com™ Category 5e Patch Panels
Available in 24 and 48 port configuration with color coded termination cap
for T568A and T568B wiring schemes.
Supplied with black Mini-Com™ Jack Modules which accept icons for
additional port identification.
WESCO #
07498303678
07498303679
Mfg. #
CPPKT5E24WBLY
CPPKT5E48WBLY
DP5e™ UTP Patch Panels
Category 5e, patch panel with 8-position, 8-wire ports. Utilizes 110
termination on back panel and includes retention cap for each port.
Available in 12, 24, and 48 port configurations.
Flat Patch Panel
WESCO #
Mfg. #
07498303700
DP125E88TGY
Angled Patch Panel
WESCO #
Mfg. #
07498339180
DPA245E88TGY
07498303705
DP245E88TGY
07498303717
07498303709
DP485E88TGY
DPA485E88TGY
TX5e™ UTP Patch Cords
Patch Cords for use with TX5e™ Modules and DP5e™ Patch Panels:
Features next generation stranded cable and enhanced performance
modular plugs for superior performance.
WESCO #
074983 16526
074983 16541
074983 16656
074983 16571
112
Mfg. #
UTPCH2BUY
UTPCH3BUY
UTPCH4BUY
UTPCH5BUY
Description
2ft Blue
3ft Blue
4ft Blue
5ft Blue
WESCO#
074983 16607
074983 06237
074983 17708
Mfg. #
UTPCH7BUY
UTPCH10BUY
UTPCH15BUY
Description
7ft Blue
10ft Blue
15ft Blue
xSubstitute 3, 5, 7, 10, 14 or 20 for length of patch cord (in feet). **Standard cable colour is Off White, substitute
for other colours add BL(Black), BU(Blue), GR(Green), RD(Red), YL(Yellow), OR(Orange), VL(Violet) before the Y.
Mini-Com™ Surface Mount Boxes
CBX12
WESCO #
07498375376
Mfg. #
CBX1IW-A
07498358685
CBXJ2IW-A
07498358483
CBX2IW-AY
07498374506
CBXC4IW-A
07498303208
CBX4IW-AY
07498303221
CBXD6IW-AY
07498303196
CBX12IW-AY
CBX1
• Cable entry from side and rear knockouts and from
opening in base
• Accept Mini-Com™ Modules
• Mounts easily with screws, adhesive tape or
optional magnet
Description
Surface mount box holds one Mini-Com™ Module. Dimensions:
0.90” (22.8mm) H x 1.01” (25.5mm) W x 1.88” (47.7mm) L
Surface mount box holds two Mini-Com™ Modules.Dimensions:
0.91” (23.1mm) H x 1.77” (45mm) W x 2.44” (62mm) L
Surface mount box holds two Mini-Com™ Modules. Dimensions:
1.06” (27mm) H x 1.95” (50mm) W x 3.65” (93mm) L
Surface mount box holds four Mini-Com™ Modules. Dimensions:
0.91” (23mm) H x 3.2” (80mm) W x 3.2” (80mm) L
Surface mount box accepts four Mini-Com™ Modules. Provides
slots that accept cable ties for strain relief. Supplied with
label holder/screw cover. Dimensions: 1.1"(27.94mm)H x 2.9"
(73.66mm)W x 4.5" (114.30mm)L
Surface mount box accepts six Mini-Com™ Modules. Provides
slots that acceptcable ties for strain relief. Provides bend radius
control. Supplied with label holder / screw cover. Dimensions: 1.04"
(26.42mm)H x 4.95" (125.73mm)W x 3.79"(96.27mm)L
Surface mount box holds up to 12 Mini-Com™ Modules six on each
side. Supplied with mounting screws, adhesive backing and label
holder/screw cover. Dimensions: 1.035"(26mm)H x 5.71"(145mm)W
x 5.45"(138mm)L
Colour
Off White
STD.
Pkg.
1
Qty
10
Off White
1
10
Off White
1
10
Off White
1
10
Off White
1
10
Off White
1
10
Off White
1
10
‡ Other colours available. For other colours replace suffix IW (Off White) with EI (Electric Ivory), WH (White), IG (International
Gray) or BL (Black)
Outlets
Mini-Com™ Classic Series Vertical Faceplates with Label and Label Cover
• Includes labels and label covers for
easy port identification;
• Replacement labels / label covers
available
CFPL2
CFPL4
• Accept Mini-Com™ Modules for STP
and UTP (including Category 5e,
Category 6 and Category 6A), Fibre
Optic and Audio/Video, which snap
in and out for easy moves adds and
changes
CFPL3
CFPL6
WESCO #
07498378351
Mfg. #
CFPL2IWY
07498378357
CFPL3IWY
07498303382
CFPL4IWY
07498303392
CFPL6IWY
Description
Single gang faceplate holds up to
two Mini-Com™ Modules
Single gang, vertical faceplate
accepts three Mini-Com™ Module
accepts four Mini-Com™ Modules
accepts six Mini-Com™ Modules
Colour
Off White
STD.
Pkg.
1
Off White
1
10
Off White
1
10
Off White
1
10
Qty
10
‡ Other colours available. For other colours replace suffix IW (Off White) with EI (Electric Ivory), WH
(White), IG (International Gray) or BL (Black)
Mini-Com™ Classic Series Vertical Sloped Faceplates
• Replacement label / label covers
available
• Includes labels / label cover for easy
port identification
• Optional icons available
CFPSL2
CFPSL4
WESCO #
Mfg. #
07498377388 CFPSL2IWY
CFPHS2
• Accept Mini-Com™ Modules for STP
and UTP (including Category 5e,
Category 6 and Category 6A), Fibre
Optic and Audio/Video, which snap
in and out for easy moves adds and
changes
CFPHSL4
07498303413
CFPSL4IWY
07498303420
CFPSL6IWY
07498378381
CFPHSL4IW
Description
Single gang, sloped vertical
faceplate accepts two Mini-Com™
Modules
faceplate accepts four Mini-Com™
Modules.
faceplate accepts six Mini-Com™
Modules. Requires minimum 1.9"
wide electrical box for proper
mounting.
Single gang, sloped horizontal
faceplate accepts four Mini-Com™
Modules.
Colour
Off White
STD.
Pkg.
1
Off White
1
10
Off White
1
10
Off White
1
10
Qty
10
‡ Other colours available. For other colours replace suffix IW (Off White) with EI (Electric Ivory), WH (White),
IG (International Gray) or BL (Black). All faceplates supplied with mounting screws.
For
For more
more information
information about
about WESCO
WESCO Distribution,
Distribution, call
call 11 (866)
(866) WESCOCA
WESCOCA (937-2622)
(937-2622) or
or visit
visit www.wesco.ca
www.wesco.ca
113
Labelling
Cougar™ LS9 Hand-Held Thermal Transfer Printer and Accessories
• Prints a wide variety of continuous tapes for marking of wires/cables, patch panels,
faceplates, safety/facility identification and other network and electrical applications.
• Fast loading label cassette includes both label material and ribbon to make
changing labels easy.
• Legends can be easily aligned with ports on patch panels and faceplates,
eliminating the need for manual spacing and guesswork.
WESCO #
Mfg. #
07498300066 LS9
Description
Includes LS9 printer, one cassette of T100X000VPCBK continuous tape, six AA alkaline batteries and quick
reference card.
Continuous Tape Cassettes
STD.
Pkg.
1
WESCO #
07498335312
Mfg. #
T038X000VPC-BK
Description
9.65mm(H) x 7.6m(L)
STD.
Pkg
1
STD.
Qty
10
07498335315
T050X000VPC-BK
12.70mm(H) x 7.6m(L)
1
10
07498335762
T100X000VPC-BK
25.40mm(H) x 7.6m(L)
1
10
For a complete list of all available labels, please visit www.panduit.com
114
114
PanTher™ LS8E Hand-Held Thermal Transfer Printer and Accessories
• Cut-to-length functionality eliminates label waste and label trimming labour.
• Partial cut feature available to provide tear-apart strips of labels.
• Label cassette contains integrated memory device for automatic formatting, recall of
last legend used and number of labels remaining in cassette.
WESCO #
Mfg. #
07498375613 LS8E-KIT
STD
.Pkg.
1
Description
Includes LS8E printer, one cassette of S100X150VAC
self-laminating labels, six AA alkaline batteries, LS8CASE, LS8-PCKIT, LS8-WS, quick reference card and
operator's manual.
Self Laminating Labels
WESCO #
07498335300
Mfg. #
S050X150VAC
Description
12.70mm(W) x 38.10mm(L), 200/cassette
STD.
Pkg
1
STD.
Qty
10
07498368106
S075X150VAC
1
10
07498335303
S100X150VAC
1
10
Continuous Tape Cassettes
07498335312
T038X000VPC-BK
9.65mm(H) x 7.6m(L)
1
10
07498335315
T050X000VPC-BK
12.70mm(H) x 7.6m(L)
1
10
07498335762
T100X000VPC-BK
25.40mm(H) x 7.6m(L)
1
10
For a complete list of all available labels, please visit www.panduit.com
Cable Management Systems & Racking
Standard Racks and Accessories
• Can be used with all PANDUIT™
Cable Management and Patch Panel
products in addition to any industry
standard 19” components
• Sturdy aluminum and steel
construction
WESCO #
Mfg. #
• Double-sided #12-24 universal
mounting hole spacing
• 24 #12-24 mounting screws included
• CMR19X84 Rack is UL listed for 800
lbs. load rating
Description
Standard Racks - Aluminum
07498359235
CMR19X84
07498359236
CMR19x47
84.0"H x 20.3"W x 3.0"D
(2134mm x 514mm x 76mm)
48.0"H x 20.3"W x 3.0"D
(1219mm x 514mm x 76mm)
Standard Racks - Steel
07498317394 CMR19X84S 84"H x 19"W x 3"D
(2133.6mm x 482.6mm x 76.2mm)
Colour No. of Rack
Spaces
STD.
Pkg.
Black
45
1
Black
24
1
Black
45
1
NetManagerTM Horizontal Cable Managers
• Removable front cover hinges 180° up
or down
• Integral bend radius control throughout
all cable pathways
NCMHF1
• Built-in cable retainers
• Pass through holes allow front to rear
cabling
WESCO #
07498381906
Mfg. #
NCMHF1
Description
1.7"H x 19.0"W x 3.7"D (44mm x 483mm x 95mm)
07498381904
NCMHF2
3.5"H x 19.0"W x 3.7"D (88mm x 483mm x 95mm)
07498381093
NCMH2
3.5”H x 19.0”W x 9.8”D (88mm x 483mm x 248mm)
115
^One rack space = 1.75” (44.45mm)
NCMHF2
Fibre Rack Mount Enclosures
• Can be mounted to any
standard EIA 19” or 23”
rack
• Includes Fibre Optic
Cable Routing
Accessory Kit and Label
FRME36ESTBL
FRME36EBL
WESCO #
Mfg. #
07498385921
FRME1
07498317409
FRME2
07498385485
FRME3
Description
• Top, bottom, and side
entry
• Accepts Opticom™
Fibre Adapter Panels
Colour No. of Rack
Spaces
Holds up to 3 FAP or FMP adapter panels. Dimensions: 1.74"H Black
1
x 17.16"W x 11.80"D (44.2mm x 435.9mm x 299.7mm)
2
x 17.16"W x 11.80"D (87.6mm x 433.3mm x 292.1mm)
3
x 17.16"W x 11.80"D (127.0mm x 433.3mm x 292.1mm)
STD.
Pkg.
1
1
1
^One rack space = 1.75”. ST* is a trademark of Lucent Technologies.
Fibre Solutions
LC, SC and ST Pre-Polished Fibre Optic Connectors
• TIA/EIA-604 FOCIS-10 compatible
connectors
• Exceeds TIA/EIA-568-B.3
performance requirements
• Robust design protects fibres from
mechanical and environmental
stress
• Non-optical disconnect maintains
data transmission under tensile
loads for jacketed cable only.
LC Fiber Optic
Connector
SC Fiber Optic
Connector
ST Fiber Optic
Connector
• Factory pre-polished fibre endface
eliminates time-consuming field
polishing to reduce installation costs,
labour, scrap, and the number of
tools required
• Cam activated fibre and buffer clamp
mechanisms provide superior fibre
and buffer retentionless sensitivity
to fibre tensile loading.
STD.
Pkg.
WESCO #
Mfg. #
Description
LC OptiCam™ 10GIG™ 50/125um Multimode Fibre Optic Connectors
Colour
Qty
07498304748
FLCSMCXAQY 50/125um multimode simplex fibre optic 900um connector
Aqua
1
10
07498304742
FLCDMCXAQY 50/125um multimode duplex fibre optic 900um connector
Aqua
1
10
LC OptiCam™ 50/125um Multimode Fibre Optic Connectors
07498304746
FLCSMC5BLY
50/125um multimode simplex fibre optic 900um connector.
Black
1
10
07498304740
FLCDMC5BLY
50/125um multimode duplex fibre optic 900um connector
Black
1
10
LC OptiCam™ 10GIG™ 62.5/125um Multimode Fibre Optic Connectors
07498304747
FLCSMC6BLY
62.5/125um multimode simplex fibre optic 900um connector
Black
1
10
07498304741
FLCDMC6BLY
62.5/125um multimode duplex fibre optic 900 um connector
Black
1
10
LC OptiCam™ Singlemode Fibre Optic Connectors
116
07498317597
FLCSSCBUY
singlemode simplex fibre optic 900um connector
Blue
1
10
07498317596
FLCDSCBUY
singlemode duplex fibre optic 900um connector
Blue
1
10
SC OptiCam™ Fibre Optic Connectors - Pre-Polished
SC OptiCam™ 10GIG™ 50/125um Multimode Fibre Optic Connectors
07498321457
FSCMCXAQ
50/125um multimode simplex fibre optic 900um connector
Aqua
1
10
07498321464
FSCDMCXAQ
Aqua
1
10
SC OptiCam™ 50/125um Multimode Fibre Optic Connectors
07498320675
FSCMC5BL
Black
1
10
07498378602
FSCMPC5BL
composite 50/125um multimode simplex fibre optic 900um connector Black
1
10
07498321455
FSCDMC5BL
Black
1
10
SC OptiCam™ 62.5/125um Multimode Fibre Optic Connectors
07498320151
FSCMC6BL
Black
1
10
07498321524
FSCMPC6BL
composite 62.5/125um multimode simplex fibre optic 900um connector Black
1
10
07498320669
FSCDMC6BL
62.5/125um multimode duplex fibre optic 900um connector
Black
1
10
Blue
1
10
SC OptiCam™ Singlemode Fibre Optic Connectos
07498321469
FSCSCBU
62.5/125um singlemode simplex fibre optic 900um connector
ST OptiCam™ Fibre Optic Connectors - Pre-Polished Cam Termination
ST OptiCam™ 10GIG™ 50/125um Multimode Fibre Optic Connectors
07498321584
FSTMCXAQ
10GIG™ 50/125um multimode simplex fibre opitc 900um
connector
ST OptiCam™ 50/125um Multimode Fibre Optic Connectors
Aqua
1
10
07498321555
FSTMC5BL
Black
1
10
07498371802
FSTMPC5BL
composite 50/125um multimode simplex fibre optic 900um connector Black
1
10
ST OptiCam™ 62.5/125um Multimode Fibre Optic Connectors
07498321552
FSTMC6BL
Black
1
10
07498321574
FSTMPC6BL
composite 62.5/125um multimode simplex fibre optic 900um connector Black
1
10
1
10
ST OptiCam™ Singlemode Fibre Optic Conenctors
07498321664
FSTSCBU
singlemode simplex fibre optic 900um connector
Blue
Fibre Solutions
Mini-Com™ Fibre Optic Adapter Modules
CMDEISCIE
WESCO#
Mfg.#
SC Connector
07498384532 CMDEISCEI
2
1
10
1
Blue
1
10
1
1
10
1
Elec.
Ivory
Black
1
10
1
Black
1
10
2
Black
1
10
2
Black
1
10
1
Black
1
10
2
Black
1
10
Module supplied with one ST multimode fibre optic adapter
with phosphor bronze split sleeve.
Module supplied with one ST singlemode fibre optic adaptor with ceramic split sleeve.
1
Elec.
Ivory
Blue
1
10
1
10
Module supplied with one LC Sr/Jr SFF duplex multimode
fibre optic adapter with phosphor bronze split sleeve
CMDJAQLCBL Module supplied with one LC Sr/Jr 10GIG™ duplex multimode fibre optic adapter with phosphor bronze split sleeve
CMDJAQLCZBL Module supplied with one LC Sr./Jr. 10GIG™ SFF duplex
multimode fibre optic adapter with ceramic split sleeves.
CMDJLCZBU
Module supplied with one LC Sr./Jr. SFF duplex singlemode fibre optic adapter with ceramic split sleeves.
1
1
10
1
Elec.
Ivory
Black
1
10
1
Black
1
10
1
Blue
1
10
CMSBUSCZBU
07498384504
CMSEISCEI
0749838453
CMSAQSCBL
0749838452
CMSAQSCZBL
07498384532
CMDAQSCBL
07498384532
CMDAQSCZBL
07498385448
CMSAGSCZBL
07498359297
CMDAGSCZBL
ST* Connector
07498358716 CMSTEI
CMSTZBU
LC Connector
07498379321 CMDJLCEI
07498399236
Module Supplied with one SC duplex multimode fibre optic
adapter with phosphor bronze split sleeve
Module supplied with one SC duplex singlemode fibre optic
adapter with ceramic split sleeve.
Module supplied with one SC simplex singlemode fibre
optic adaptor with ceramic split sleeve.
Module supplied with one SC simplex multimode fibre optic
adapter with phosphor bronze split sleeve
Module supplied with one SC 10GIG™ simplex multimode
Module supplied with one SC 10GIG™ simplex multimode
fibre optic adapter with ceramic split sleeve
Module supplied with one SC 10GIG™ duplex multimode
Module supplied with one SC 10GIG™ duplex multimode
fibre optic adapter with ceramic split sleeve
Module supplied with one SC APC simplex singlemode
fibre optic adaptor with ceramic split sleeve
Module supplied with one SC APC duplex singlemode fibre
optic adaptor with ceramic split sleeve.
2
Colour
10
07498383243
07498337654
Description
STD. STD.
Pkg Cnt.
Qty Qty
1
CMDBUSCZBU
07498379579
No. of
Module
Spaces
Elec.
Ivory
Blue
07498384520
07498339618
CMDJLCEI
CMSTE
• Adapter modules can be used with multimode or
singlemode connectors and patch cords
• Compatible with all PAN-NET™ products for
complete modularity
1
‡Other colours available. ST* is a trademark of Lucent Technologies.
Optic-Cam™ Pre-Polished Termination Kit and Components
• Contains tools, consumables, installation instructions and stripping templates;
• OCTT OptiCam™Termination Tool
• FVFLPC-2.5SMY Patch cord for all OptiCam™ 2.5mm ferrule connectors (SC and ST)
• (1) FVFLPC-1.25SMY Patch cord for all OptiCam™ 1.25mm ferrule connectors (LC)
• (1 set) Installation instructions and stripping templates for LC, SC and ST OptiCam™
Connectors
WESCO #
07498371786
Mfg. #
FPPKIT-CVY
Description
all of the above
07498371788
FCAMKIT
all of the above, plus;
(1) FALC Alcohol bottle (empty)
(1) FSCDVR Screwdriver
(1) FTWZER Tweezers
(1) FKS Fiber Kevlar shears
(1) FJQCVR Fiber cleaver tool
(1) FBFSP Fiber buffer stripper
(1) FGLS Safety glasses
(1) FWBTL Water bottle (empty)
(1) FWRKMAT Fiber safe workmat
117
Pan-Way™ Surface Raceway System
Pan-Way™ Hinged LDPH Surface Raceway System
• Two-piece hinged design allows
cables to be laid in
• Factory applied adhesive backing
speeds installation
• Terminates using surface mount
outlet box solutions or Mini-Com™
Surface Mount Boxes.
WESCO#
LDPH3
07498334420
07498334384
07498334385
LDPH5
07498334425
07498334398
07498334399
LDPH10
07498334429
07498334410
07498334411
Mfg.#
• UL and CSA rated 600V
• Meets UL 5a and CSA C22.2 No.
No. 62.1-03 standards
• FT4 rated
Description
Raceway
Size
Std.
Pkg.
Qty.
Std.
Stn.
Qty.
LDPH3IW6-A
LDPH3IW8-A
LDPH3IW10-A
6 foot length
8 foot length
10 foot length
0.75" x .41"
6
8
10
120
160
200
LDPH5IW6-A
LDPH5IW8-A
LDPH5IW10-A
6 foot length
8 foot length
10 foot length
1.02" x .55"
6
8
10
120
160
200
LDPH10IW6-A
LDPH10IW8-A
6 foot length
8 foot length
1.52" x .86"
6
8
120
160
10
200
LDPH10IW10-A 10 foot length
All parts listed in IW (Off White) colour. To order other colours substitute IW for EI (Electric Ivory),
IG (International Gray) or WH (White)
118
Pan-Way™ Hinged LDPH Raceway Fittings
• All products shown are power rated up to 600v.
• 1” Bend Radius Fittings also available
• Consult factory for part numbers
Mfg.#
OCFX*IW-X
ICFX*IW-X
RAFX*IW-X
TFX*IW-X
CRFX5IW-X
ECFX*IW-X
DCEFIW-X
RAEFXIW-X
RFX53IW-X
RFX105IW-X
RFX103IW-X
CFX*IW-X
Description
Outside Corner
Inside Corner
Right Angle
Tee Fitting
Four-Way Cross
End Cap
Drop Ceiling/Entrance End
Right Angle/Entrance End
LDPH5 to LDPH3 Reducer
Coupler
*Insert raceway size 3, 5 or 10
All parts listed in IW (Off White) colour. To order other colours substitute IW
for EI (Electric Ivory), IG (International Gray) or WH (White)
Combining Value
and Performance Like No One Else
SUPERIOR ESSEX believes that its premises wire and
cable products should provide a total user experience that
is unequaled in the industry. That is why we tend to offer
more useful features, better performance, higher quality
and better overall value, than our competition. Some of
these benefits are big, some are small; but one by one,
they add up to a total product value that excels beyond
the norm. Listed below are some ways you can Gain the
Advantage by using SUPERIOR ESSEX products.
Product LIne
• Full range of Premises, OSP, Fiber Optic and Composite cables for audio, video and data transmission
Certification
• TL 9000 and ISO 9001 certification in every production facility
System Programs
® • PerformaLink
Lifetime warranty guarantees CAT 5e and CAT 6 permanent link, will meet or exceed current TIA/EIA 568-B industry specifications, when installed with multiple connectivity manufacturers.
• Campus
Warranty Extended warranty on all cabling (premises copper/fiber, OSP copper/fiber) installed within a single campus project.
Product Features
• QuickCount® Marking System
Cable legend shows footage remaining in box with count down
from 1000 to zero feet.
• Colour Coded Box Labels
Easy identification
• WideMouth Boxes (CAT 5e)
Eases tension on the cable as it’s pulled from the box.
• Reel-in-a-Box Dual Brake System The brake allows for back-tension and over-spin control.
(BrakeBox™) (CAT 6)
• Positive Identification Striping
A coloured stripe that appears on 100% of the length of the
conductor for easy identification of tip and ring mates.
• Fiber Reel-in-a-Box with QuickCount® marking system
Technical Support (877-263-2818)
• A toll free hotline for your technical/installation questions.
For more information visit us online at SuperiorEssex.com
119
Combining Value
Category 3 CMR/CMP (2 - 400 Pair)
The ideal choice for LAN transmission with specified bandwidth up to 16 MHz. These wires are typically used
for voice and data transmission rates up to 10 Mbps. It is the cable choice for 10 Base-T Ethernet and 4 Mbps
Token Ring™ systems. Category 3 cables represent the minimum transmission performance acceptable for
horizontal cabling systems. Category 3 cables are FCC Part 68 compliant and verified to TIA/EIA 568-B. Other
uses for this wire include indoor use on customer’s premises for the interconnection of telephone key systems,
PBX and intercom systems. Product is offered for either Plenum (CMP, MPP) or Riser (CMR, MPR) applications.
Available pair sizes are 2 through 400 pair.
WESCO #
120
CMR
62029698031
62029605500
62029606100
62029606600
62029604400
62029604700
62029605000
62029605200
CMP
62029698032
62029605400
62029605600
62029698033
62029604500
62029604900
62029605100
Mfg. #
Pair Count
AWG (mm)
18-041-33
18-141-33
18-241-33
18-341-33
18-872-33
18-475-33
18-579-33
18-789-33
2
3
4
6
12
25
50
100
24
24
24
24
24
24
24
24
18-041-36
18-141-36
18-241-36
18-341-36
18-475-36
18-579-86
18-799-86
2
3
4
6
25
50
100
24
24
24
24
24
24
24
Jacket Colour
Nom. Dia.
inches (mm)
Package
(0.5)
(0.5)
(0.5)
(0.5)
(0.5)
(0.5)
(0.5)
(0.5)
Gray
Gray
Gray
Gray
Gray
Gray
Gray
Gray
0.12 (3.0)
0.14 (3.6)
0.16 (4.1)
0.19 (4.8)
0.24 (6.1)
0.33 (8.4)
0.47 (11.9)
0.64 (16.3)
1000’ POP® Box
1000’ POP® Box
1000’ POP® Box
1000’ POP® Box
1000’ Reel
1000’ Reel
1000’ Reel
Cut to Length
(0.5)
(0.5)
(0.5)
(0.5)
(0.5)
(0.5)
(0.5)
Gray
Gray
Gray
Gray
Gray
Natural
Natural
0.14 (3.6)
0.15 (3.8)
0.17 (4.3)
0.20 (5.1)
0.40 (10.2)
0.56 (14)
0.77 (19.6)
1000’ POP® Box
1000’ POP® Box
1000’ POP® Box
1000’ POP® Box
1000’ Reel
1000’ Reel
Cut to Length.
OSP Broadband Category 5e
BBD Category 5e OSP cables are designed to provide extension of the LAN beyond the premises. A variety of
constructions are available to suit multiple environmental needs.
• BBDE: no shield • black polyethylene outer jacket
• BBDNE: inner polyethylene jacket • electrically continuous 0.008 in (0.2 mm) polymer coated smooth aluminum
tape, applied with an overlap • black polyethylene outer jacket
• BBDGE: inner polyethylene jacket • electrically continuous 0.005 in (0.13 mm) corrugated copper-clad steel or
bronze tape, applied with an overlap • shield flooded with a flooding compound • black polyethylene outer jacket
WESCO #
62029698006
62029698007
62029698008
Mfg. #
Name
Pair
Count
AWG (mm)
Jacket Colour
04-001-54
04-001-55
04-001-58
BBDNE
BBDGE
BBDE
4
4
4
24 (0.5)
24 (0.5)
24 (0.5)
Black
Black
Black
Nom. Dia.
inches (mm)
0.31 (8)
0.33 (8.4)
0.25 (6.4)
Package
1000’ Reel
1000’ Reel
1000’ Reel
Combining Value
OSP Broadband Category 6
BBD6 Is Superior Essex’s Outside Plant unshielded Broadband Category 6 cable. The cable has guaranteed
transmission performance out to 250 MHz. The cable consists of a core of four (4) balanced twisted pairs held
in place by a cross web separator and surrounded by a filling compound to prevent water ingress. The core is
jacketed with a sunlight and abrasion resistant black polyethylene outer jacket.
BBD6
BBDN6
BBDG6
Mfg. #
Shield
Pair
Count
AWG (mm)
Nom. Dia.
inches (mm)
Approx.
Weight lbs/
kft (kg/km)
Package
04-001-68
04-002-68
04-003-68
04-601-68
None
None
None
None
4
4
4
4
23 (0.57)
23 (0.57)
23 (0.57)
23 (0.57)
0.30 (7.6)
0.30 (7.6)
0.30 (7.6)
0.30in (7.6)
36 (58)
36 (58)
36 (58)
36 (58)
1000’ Reel
2500’ Reel
5000’ Reel
Cut to Length
04-001-64
04-002-64
04-003-64
04-601-64
Coated Aluminum
Coated Aluminum
Coated Aluminum
Coated Aluminum
4
4
4
4
23 (0.57)
23 (0.57)
23(0.57)
23 (0.57)
0.37 (9.4)
0.37 (9.4)
0.37 (9.4)
0.37 (9.4)
59 (88)
59 (88)
59 (88)
59 (88)
1000’ Reel
2500’ Reel
5000’ Reel
Cut to Length
04-001-65
04-002-65
04-003-65
04-601-65
Copper Clad
Copper Clad
Copper Clad
Copper Clad
4
4
4
4
23 (0.57)
23 (0.57)
23 (0.57)
23 (0.57)
0.38 (9.7)
0.38 (9.7)
0.38 (9.7)
0.38 (9.7)
75 (112)
75 (112)
75 (112)
75 (112)
1000’ Reel
2500’ Reel
5000’ Reel
Cut to Length
121
25-Pair Category 5e Power Sum CMR/CMP
25-Pair Power Sum Category 5e UTP cables are designed to provide support for both backbone and horizontal
applications. These applications include inter-closet backbone links, equipment cabling between cross-connect
and hub equipment and zone distribution horizontal cabling between wiring closets and multiple work area
transition points. The cable is available in CMP and CMR ratings and is UL verified to meet all requirements of
TIA/EIA 568-B.2.
Mfg. #
Name
51-478-25
51-478-35
51-478-48
CMR
CMR
CMP
Pair
Count
25
25
25
AWG (mm)
24 (0.5)
24 (0.5)
24 A (0.5)
Jacket
Colour
Blue
Gray
White
Nom. Dia.
Inches (mm)
0.55 (14)
0.55 (14)
0.48 (12)
Approx. Weight
lbs/kft (kg/km)
144 (214)
144 (214)
114 (170)
Package
1000’ Reel
1000’ Reel
1000’ Reel
Combining Value
Marathon LAN® Category 5e CMR/CMP
Marathon LAN® Category 5e cable offers an exceptional value for jobs that require standards compliance at
a cost-effective price. While Marathon LAN® cable meets all of the TIA/EIA 568-B specifications, it offers other
features that make it easier to use, save on installation time and expense, and ensure product quality during
the installation. Also from the QuickCount® feature, which marks the exact cable remaining in the box, to the
WideMouth payout design, which reduces tension on the wire as it is pulled during installation, Marathon LAN®
cable provides more overall value than any other Category 5e product available today.
WESCO #
62029604220
62029604224
62029604230
62029604234
Mfg. #
Name
Pair Count
51-240-25
51-240-45
51-241-28
51-241-48
CMR
CMR
CMP
CMP
4
4
4
4
AWG (mm)
24
24
24
24
(0.5)
(0.5)
(0.5)
(0.5)
Jacket
Colour
Blue
White
Blue
White
Nom. Dia.
inches (mm)
0.20 (5.08)
0.20 (5.08)
0.16 (4.10)
0.16 (4.10)
Package
1000’ POP®
1000’ POP®
1000’ POP®
1000’ POP®
Box
Box
Box
Box
Please contact a WESCO sales professional for additional colours.
Category 5e+ ScTP CMR/CMP
122
Superior Essex offers Screen Twisted Pair (ScTP) Category 5e+ cables in both plenum and riser versions. The
cable has guaranteed performance out to 350MHz and meets all applicable TIA 568-B.2 requirements. The cable
consists of four (4) balanced 24 AWG copper pairs. The core is wrapped with an aluminum foil tape and has a tin
coated drain wire. The tape wrapped core is jacketed with the appropriate flexible PVC jacket for plenum or riser
applications.
Mfg. #
5F-220-X5
5F-220-X8
Name
Riser
Plenum
Pair
Count
4
4
AWG (mm)
Nom.Dia.
Inches (mm)
0.25 (6.4)
0.23 (5.8)
24 (0.5)
24 (0.5)
Approx. Weight
lbs/kft (kg/km)
32 (48)
33 (49)
Package
1000' Reel
1000' Reel
Cobra Category 5e+ CMR/CMP
Cobra Category 5e+ cable is the performance leader in its class. With enough headroom to greatly exceed
TIA/EIA 568-B specifications, Cobra cable is ideal for installations that require true “future proofing” in channel
performance. By design, Cobra cables are manufactured to the highest quality standards, design requirements
and materials, which ensure that every box provides significant margin over TIA/EIA 568-B specifications for
NEXT, Power Sum NEXT, and Attenuation. Outstanding guaranteed and typical performance sets Cobra far
apart from common CAT 5e cables.
WESCO #
62029606400
62029606500
62029606000
62029605900
Mfg. #
Name
Pair Count
52-240-25
52-240-45
52-241-28
52-241-48
CMR
CMR
CMP
CMP
4
4
4
4
AWG (mm)
24
24
24
24
(0.5)
(0.5)
(0.5)
(0.5)
Jacket
Colour
Blue
White
Blue
White
Nom. Dia.
inches (mm)
0.22 (5.6)
0.22 (5.6)
0.18 (4.6)
0.18 (4.6)
Package
1000’ POP®
1000’ POP®
1000’ POP®
1000’ POP®
Box
Box
Box
Box
Combining Value
DataGain® Category 6+ CMR/CMP
DataGain® cable provides the best value in Category 6 cables on the market today. The innovative design
provides more flexibility than comparable cables utilizing a cross web filler. This advantageous design yields
exceptional performance that exceeds TIA/EIA Category 6 specifications. DataGain® easily surpasses
the performance of other cost-competitive Category 6 cables.
WESCO #
62029698087
62029698088
62029698089
62029698090
Mfg. #
Name
Pair Count
66-272-2A
66-272-4A
66-272-2B
66-272-4B
CMR
CMR
CMP
CMP
4
4
4
4
AWG (mm)
23
23
23
23
(0.57)
(0.57)
(0.57)
(0.57)
Jacket
Colour
Blue
White
Blue
White
Nom. Dia.
inches (mm)
0.21 (5.3)
0.21 (5.3)
0.20 (5.1)
0.20 (5.1)
Package
1000’ Reel
1000’ Reel
1000’ Reel
1000’ Reel
NextGain® Category 6eX CMR/CMP
123
NextGain® Category 6eX cable brings UTP performance to a new level. Guaranteed for 6 dB of margin
(headroom) over base requirements of current Category 6 NEXT standards, this cable maximizes bandwidth
for today’s leading edge applications and those of the future. With positive ACR verified beyond 300 MHz,
NextGain® CAT 6eX cable demonstrates superior capability for ATM, Gigabit Ethernet, and other bandwidth
intensive applications.
WESCO #
62029698067
62029698069
62029698068
62029698070
Mfg. #
Name
Pair Count
AWG(mm)
Jacket
Colour
54-272-2A
54-272-4A
54-272-2B
54-272-4B
CMR
CMR
CMP
CMP
4
4
4
4
23 (0.57)
23 (0.57)
23 (0.57)
23 (0.57)
Blue
White
Blue
White
Nom. Dia.
inches (mm)
0.24 (6.1)
0.24 (6.1)
0.23 (5.8)
0.23 (5.8)
Package
1000’ Reel
1000’ Reel
1000’ Reel
1000’ Reel
Combining Value
Category 6A STP Cable CMR/CMP
Superior Essex offers Shielded Twisted Pair (STP) Category 6A cables in both plenum and riser versions. The
cable has guaranteed performance out to 600 MHz and meets all applicable TIA 568-B.2-1 requirements. In
addition, the cable meets or exceeds TIA/EIA 568-B.2-10 Draft Specification for Augmented Category 6 (CAT 6A)
cables required for 10GBASE-T applications. The cable consists of four (4) balanced 23 AWG copper pairs. Each
pair is wrapped with a mylar-backed aluminum foil with the drain wire in the center of all four pairs. The wrapped
pairs are then jacketed with a flexible PVC jacket appropriate for either plenum or riser applications.
Mfg. #
6S-220-XA
6S-220-XB
Name
Pair Count
Riser
Plenum
4
4
Nom.Dia.
inches (mm)
0.31 (7.9)
0.29 (7.4)
Approx. Weight
lbs/kft (kg/km)
40 (60)
46 (69)
Package
1000' Reel
1000' Reel
10Gain™ Category 6A CMR/CMP
124
10Gain™ Augmented Category 6 (CAT 6A) cable brings UTP performance to a new level. This cable is designed
to meet the internal and alien cross-talk performance requirements of TIA/EIA 568-B.2-10 and ISO/IEC 11801
Edition 2.1 as tested in a 6 around 1 configuration. With guaranteed performance out to 500 MHz, 10Gain CAT
6A cable demonstrates superior capability for 10 Gigabit Ethernet and all other bandwidth intensive and legacy
applications.
CMR
CMP
Mfg. #
Pair
Count
AWG (mm)
Jacket
Color
Nom. Dia.
inches (mm)
Approx. Weight
lbs/kft (kg/km)
Package
6A-272-2A
6A-272-3A
6A-272-4A
4
4
4
22 (0.63)
22 (0.63)
22 (0.63)
Blue
Gray
White
0.35 (8.9)
0.35 (8.9)
0.35 (8.9)
50 (75)
50 (75)
50 (75)
1000' Reel
1000' Reel
1000' Reel
6A-272-5A
6A-272-6A
4
4
22 (0.63)
22 (0.63)
Green
Yellow
0.35 (8.9)
0.35 (8.9)
50 (75)
50 (75)
1000' Reel
1000' Reel
6A-272-7A
6A-272-9A
4
4
22 (0.63)
22 (0.63)
Purple
Red
0.35 (8.9)
0.35 (8.9)
50 (75)
50 (75)
1000' Reel
1000' Reel
6A-272-2B
6A-272-3B
6A-272-4B
4
4
4
22 (0.63)
22 (0.63)
22 (0.63)
Blue
Gray
White
0.32 (8.1)
0.32 (8.1)
0.32 (8.1 )
48 (72)
48 (72)
48 (72)
1000' Reel
1000' Reel
1000' Reel
6A-272-5B
6A-272-6B
6A-272-7B
6A-272-9B
4
4
4
4
22 (0.63)
22 (0.63)
22 (0.63)
22 (0.63)
Green
Yellow
Purple
Red
0.32 (8.1)
0.32 (8.1)
0.32 (8.1)
0.32 (8.1)
48 (72)
48 (72)
48 (72)
48 (72)
1000' Reel
1000' Reel
1000' Reel
1000' Reel
Combining Value
SUPERIOR ESSEX offers a complete line of fiber optic cables for all installation environments
and transmission bandwidth scenarios. The cable designs include the following design options:
• Bulk patch cable cordage
• Premise Distribution
• Indoor/Outdoor OFNR Loose Tube
• Indoor/Outdoor OFNR Tight Buffer
• Armored OSP
• Ribbon Cables
• Hybrid designs (multimode and single mode)
The following tables highlight the important optical performance
specifications for SUPERIOR ESSEX standard and enhanced
fiber cable product lines.
TeraGain® and single mode fiber optic cables represent the most cost effective method for installing
an optical link between communications equipment. The TeraGain products consist of 50 micron and
62.5 micron multimode fibers.
Optical Performance
Wavelength (nm)
Maximum Attenuation (dB)
Minimum Bandwidth (MHz-Km)
Gigabit Ethernet Distance (meters)
TeraGain®
50/125
850/1300
3.5/1.5
500/500
600/1000
*1.0dB/Km or tight buffer cables, 0.5 for loose tube cables
TeraGain®
62.5/125
850/1300
3.5/3.5
220/600
300/550
Single mode
8.3/125
1310/1550
1.0/0.5*
n/a
5000
125
TeraGain® XT fiber optic cables incorporate optical fibers having a much higher bandwidth capacity
than what is required by typical applications such as Fiber Channel, ATM and Gigabit Ethernet.
These high performance fibers allow the system designer to extend distances for optical backbone
links between communications transmission equipment.
Optical Performance
Wavelength (nm)
Gigabit Ethernet Distance (meters)
TeraGain® XT
50/125
850/1300
3.5/1.5
600/600
TeraGain® XT
62.5/125
850/1300
3.5/3.5
250/1200
1100/1300
625/1225
TeraGain® 10G fiber optic cables provide the ultimate in bandwidth performance for multimode fiber
applications. SUPERIOR ESSEX offers this next-generation fiber in all cable application designs.
The optical fiber used in these cables exceeds the minimum distance requirements as defined by
IEEE 10BASEG-X guidelines and is compliant with the TIA/EIA-568-B1-3 draft standard.
Optical Performance
Wavelength (nm)
10 Gigabit Ethernet Distances (meters)
* Overfill launch (OFL) m
TeraGain® 10G
50/125
850/1300
3.5/1.5
2000*/500
100/300
For more information visit us online at SuperiorEssex.com
Combining Value
Loose Tube Indoor/Outdoor Riser - OFNR (4 - 144 fibers)
TeraGain® Loose Tube Riser cables are ideal for campus environments, private networks and local area
networks. These dual purpose cables save money and installation time by allowing a direct transition from indoor
to outdoor applications with a single cable. Because these cables are fully water blocked with dry elements,
stripping and termination is much easier. Also suitable for riser applications inside buildings, these fiber optic
cables exhibit the mechanical and environmental characteristics of an outside plant cable coupled with the
flexibility and compact size required in today’s premise networks. TeraGain® loose tube riser cables are available
up to 144 fibers. A mixture of fiber types and bandwidth capabilities are also available.
WESCO #
LT Riser
62029698021
62029698022
62029698023
62029698024
62029698025
62029698026
62029698027
62029698028
62029698029
62029698030
126
Mfg. #
Fiber
Count
Nom. Dia.
inches (mm)
13004X200
13006X200
13008X200
13012X200
13024X200
13036X200
13048X100
13072X100
13096X100
13144X100
4
6
8
12
24
36
48
72
96
144
0.44 (11.2)
0.44 (11.2)
0.44 (11.2)
0.44 (11.2)
0.44 (11.2)
0.44 (11.2)
0.51 (13.0)
0.55 (13.9)
0.63 (16.1)
0.79 (20.1)
Max Tensile Loading
Install
Long Term
lbs (N)
lbs (N)
600
600
600
600
600
600
600
600
600
600
(2700)
(2700)
(2700)
(2700)
(2700)
(2700)
(2700)
(2700)
(2700)
(2700)
200
200
200
200
200
200
200
200
200
200
Min Bend Radius
Install
Long Term
inches(mm) inches(mm)
(890)
(890)
(890)
(890)
(890)
(890)
(890)
(890)
(890)
(890)
8.8 (224)
8.8 (224)
8.8 (224)
8.8 (224)
8.8 (224)
8.8 (224)
10.2 (260)
11.0 (278)
12.6 (322)
15.8 (402)
4.4 (112)
4.4 (112)
4.4 (112)
4.4 (112)
4.4 (112)
4.4 (112)
5.1 (130)
5.5 (139)
6.3 (161)
7.9 (201)
 Replace X with 9 for single mode fiber, 5 for 50/125 TeraGain® multimode fiber, 6 for 62.5/125 TeraGain® multimode fiber or 8 for non-zero
dispersion shifted fiber.
 Standard jacket colour is black.
 Armored cables and hybrid options are also available.
Loose Tube All Dielectric Cables Single mode and TeraGain® Multimode Fiber (4 - 24 fibers)
Single Loose Tube All-Dielectric Cables are designed for outside plant applications specifically for lashed aerial
or underground duct installations. The single loose tube design exhibits optimum transmission performance over
a broad temperature range.
WESCO #
Mfg. #
Fiber Count
Nom. Diameter
inches (mm)
Single Loose Tube Single Jacket Cable
62029698060
51004X100
4
0.31 (7.8)
62029698061
51006X100
6
0.31 (7.8)
62029698062
51012X100
12
0.31 (7.8)
62029698063
51024X100
24
0.37 (9.3)
Multiple Loose Tube Single Jacket Cable
62029698012
11004X200
4
0.37 (9.3)
62029698013
11006X200
6
0.37 (9.3)
62029698014
11012X200
12
0.37 (9.3)
62029698015
11024X200
24
0.37 (9.3)
62029698016
11036X200
36
0.39 (9.8)
62029698027
11048X100
48
0.46 (11.6)
62029698018
11072X100
72
0.50 (12.8)
62029698019
11096X100
96
0.59 (14.9)
62029698020
11120X100
120
0.66 (16.7)
Max Tensile Loading
Install
Long Term
lbs (N)
lbs (N)
Min Bend Radius
Install Long Term
inches(mm)inches(mm)
600 (2700)
600 (2700)
600 (2700)
600 (2700)
200 (890)
200 (890)
200 (890)
200 (890)
6.2 (156)
6.2 (156)
6.2 (156)
7.4 (186)
3.1 (78)
3.1 (78)
3.1 (78)
3.7 (93)
600
600
600
600
600
600
600
600
600
200
200
200
200
200
200
200
200
200
7.4 (186)
7.4 (186)
7.4 (186)
7.4 (186)
7.8 (196)
9.2 (232)
10.0(256)
11.8(298)
13.2(334)
3.7 (93)
3.7 (93)
3.7 (93)
3.7 (93)
3.9 (98)
4.6 (116)
5.0 (128)
5.9 (149)
6.6 (167)
(2700)
(2700)
(2700)
(2700)
(2700)
(2700)
(2700)
(2700)
(2700)
(890)
(890)
(890)
(890)
(890)
(890)
(890)
(890)
(890)
 Standard jacket colour is black.
 Armored cables and hybrid options are also available.
Combining Value
Interlocked Armor Fiber Optic Cables OFCR/OFCP
Interlocked Armor Fiber Optic Cables provide for an extremely well protected cable package that is ideally suited
for harsh environments. The armor is available in steel or aluminum and comes with either an OFCR (Riser) or
OFCP (Plenum) rating. This product design offers the system designer a product that can be installed in high
traffic areas where added mechanical protection and security are required. The flexible interlocked armored cable
design is popular for retrofitapplications and eliminates the need to install rigid conduit while still meeting building
code guidelines. Also, the complete line of Superior Essex Fiber Opticcables is available with interlocking armor.
Mfg #
Fiber Type
Fiber
Count
UL Rat- Nom. Diameter
Approx.
Max Tensile Loading Min Bend Radius
ing
inches (mm) Weight lbs/ Install Long Term Install Long Term
lbs (N)
lbs (N)
inches
inches
kft (kg/km)
(mm)
(mm)
Riser Rated, Aluminum Interlocked Armor, FR-PVC Jacket
L30023301
L30043301
L30063401
L30123401
L30183K1Q
RWP SMF
RWP SMF
RWP SMF
RWP SMF
RWP SMF
2
4
6
12
18
OFCR
OFCR
OFCR
OFCR
OFCR
0.57 (14.0)
0.57 (14.0)
0.57 (14.0)
0.62 (15.8)
0.624 (15.8)
226 (337)
226 (337)
226 (337)
253 (377)
136 (202)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
L30243K1Q
RWP SMF
24
OFCR
0.740 (18.8)
169 (252)
450 (2025)
330 (1350)
L30363401
RWP SMF
36
OFCR
0.97 (24.6)
429 (639)
450 (2025)
330 (1350)
L30483401
RWP SMF
48
OFCR
0.97 (24.6)
429 (639)
450 (2025)
330 (1350)
L30723401
RWP SMF
72
OFCR
1.12 (28.4)
508 (757)
450 (2025)
330 (1350)
L30963401
RWP SMF
96
OFCR
1.22 (31.0)
560 (835)
450 (2025)
330 (1350)
L31443401
RWP SMF
144
OFCR
1.32 (33.5)
612 (912)
450 (2025)
330 (1350)
6.8 (172)
6.8 (172)
6.8 (172)
7.4 (188)
12.5
(31.7)
14.8
(37.6)
11.6
(295)
11.6
(295)
13.4
(340)
14.6
(370)
15.8
(401)
5.7 (145)
5.7 (145)
5.7 (145)
6.2 (157)
9.4 (23.8)
11.1 (28.2)
9.7 (246)
9.7 (246)
11.2 (284)
12.2 (309)
13.2 (335)
Plenum Rated, Aluminum Interlocked Armor, FR-PVC Jacket
L40023301
L40043301
L40063401
L40123401
L40183K1Q
RWP SMF
RWP SMF
RWP SMF
RWP SMF
RWP SMF
2
4
6
12
18
OFCP
OFCP
OFCP
OFCP
OFCP
0.57 (14.0)
0.57 (14.0)
0.57 (14.0)
0.62 (15.7)
0584 (14.8)
226 (337)
226 (337)
226 (337)
253 (377)
105 (156)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
L40243K1Q
RWP SMF
24
OFCP
0584 (14.8)
111 (165)
450 (2025)
330 (1350)
L40363401
RWP SMF
36
OFCP
0.97 (24.6)
429 (639)
450 (2025)
330 (1350)
L40483401
RWP SMF
48
OFCP
0.97 (24.6)
429 (639)
450 (2025)
330 (1350)
L40723401
RWP SMF
72
OFCP
1.07 (27.2)
482 (720)
450 (2025)
330 (1350)
6.8 (172)
6.8 (172)
6.8 (172)
7.4 (188)
11.7
(29.7)
11.7
(29.7)
11.6
(295)
11.6
(295)
12.8
(325)
5.7 (145)
5.7 (145)
5.7 (145)
6.2 (157)
8.8 (22.3)
8.8 (22.3)
9.7 (246)
9.7 (246)
10.7 (271)
;
127
Combining Value
Interlocked Armor Fiber Optic Cables OFCR/OFCP (continued)
Mfg #
Fiber Type Fiber UL Rating Nom. DiamApprox.
Count
eter inches Weight lbs/
(mm)
kft (kg/km)
Max Tensile Loading
Install lbs
Long Term
(N)
lbs (N)
Min Bend Radius
Install
Long
inches
Term
(mm)
inches
(mm)
L30046301
L30066401
L30126401
L30186K1Q
L30246K1Q
L30366401
L30486401
L30726401
L30966401
L31446401
62.5/125 MM
62.5/125 MM
62.5/125 MM
62.5/125 MM
62.5/125 MM
62.5/125 MM
62.5/125 MM
62.5/125 MM
62.5/125 MM
62.5/125 MM
4
6
12
18
24
36
48
72
96
144
OFCR
OFCR
OFCR
OFCR
OFCR
OFCR
OFCR
OFCR
OFCR
OFCR
0.570 (14.0)
0.570 (14.0)
0.620 (15.8)
0.624 (15.8)
0.740 (18.8)
0.970 (24.6)
0.970 (24.6)
1.120 (28.4)
1.220 (31.0)
1.320 (33.5)
226 (337)
226 (337)
253 (377)
136 (202)
169 (252)
429 (639)
429 (639)
508 (757)
560 (835)
612 (912)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
6.8 (172)
6.8 (172)
7.4 (188)
12.5 (31.7)
14.8 (37.6)
11.6 (295)
11.6 (295)
13.4 (340)
14.6 (370)
15.8 (401)
5.7 (145)
5.7 (145)
6.2 (157)
9.4 (23.8)
11.1 (28.2)
9.7 (246)
9.7 (246)
11.2 (284)
12.2 (309)
13.2 (335)
6.8 (172)
6.8 (172)
6.8 (172)
7.4 (188)
11.7 (29.7)
11.7 (29.7)
11.6 (295)
11.6 (295)
12.8 (325)
5.7 (145)
5.7 (145)
5.7 (145)
6.2 (157)
8.8 (22.3)
8.8 (22.3)
9.7 (246)
9.7 (246)
10.7 (271)
6.8 (172)
6.8 (172)
6.8 (172)
7.4 (188)
12.5 (31.7)
14.8 (37.6)
11.6 (295)
11.6 (295)
13.4 (340)
14.6 (370)
15.8 (401)
5.7 (145)
5.7 (145)
5.7 (145)
6.2 (157)
9.4 (23.8)
11.1 (28.2)
9.7 (246)
9.7 (246)
11.2 (284)
12.2 (309)
13.2 (335)
6.8 (172)
6.8 (172)
6.8 (172)
7.4 (188)
11.7 (29.7)
11.7 (29.7)
11.6 (295)
11.6 (295)
12.8 (325)
5.7 (145)
5.7 (145)
5.7 (145)
6.2 (157)
8.8 (22.3)
8.8 (22.3)
9.7 (246)
9.7 (246)
10.7 (271)
128
L40026301
L40046301
L40066401
L40126401
L40186K1Q
L40246K1Q
L40366401
L40486401
L40726401
62.5/125 MM
62.5/125 MM
62.5/125 MM
62.5/125 MM
62.5/125 MM
62.5/125 MM
62.5/125 MM
62.5/125 MM
62.5/125 MM
2
4
6
12
18
24
36
48
72
OFCP
OFCP
OFCP
OFCP
OFCP
OFCP
OFCP
OFCP
OFCP
0.570 (14.0)
0.570 (14.0)
0.570 (14.0)
0.620 (15.7)
0584 (14.8)
0584 (14.8)
0.970 (24.6)
0.970 (24.6)
1.070 (27.2)
226 (337)
226 (337)
226 (337)
253 (377)
105 (156)
111 (165)
429 (639)
429 (639)
482 (720)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
L3002B301
L3004B301
L3006B401
L3012B401
L3018BK1Q
L3024BK1Q
L3036B401
L3048B401
L3072B401
L3096B401
L3144B401
10G/300
10G/300
10G/300
10G/300
10G/300
10G/300
10G/300
10G/300
10G/300
10G/300
10G/300
2
4
6
12
18
24
36
48
72
96
144
OFCR
OFCR
OFCR
OFCR
OFCR
OFCR
OFCR
OFCR
OFCR
OFCR
OFCR
0.570 (14.0)
0.570 (14.0)
0.570 (14.0)
0.620 (15.8)
0.624 (15.8)
0.740 (18.8)
0.970 (24.6)
0.970 (24.6)
1.120 (28.4)
1.220 (31.0)
1.320 (33.5)
226 (337)
226 (337)
226 (337)
253 (377)
136 (202)
169 (252)
429 (639)
429 (639)
508 (757)
560 (835)
612 (912)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
L4002B301
L4004B301
L4006B401
L4012B401
L4018BK1Q
L4024BK1Q
L4036B401
L4048B401
L4072B401
10G/300
10G/300
10G/300
10G/300
10G/300
10G/300
10G/300
10G/300
10G/300
2
4
6
12
18
24
36
48
72
OFCP
OFCP
OFCP
OFCP
OFCP
OFCP
OFCP
OFCP
OFCP
0.570 (14.0)
0.570 (14.0)
0.570 (14.0)
0.620 (15.7)
0584 (14.8)
0584 (14.8)
0.970 (24.6)
0.970 (24.6)
1.070 (27.2)
226 (337)
226 (337)
226 (337)
253 (377)
105 (156)
111 (165)
429 (639)
429 (639)
482 (720)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
450 (2025)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
330 (1350)
Combining Value
Multi-Unit Premises Distribution Fiber Optic Cables OFNR/OFNP
SUPERIOR ESSEX standard multimode and single mode premises distribution cables feature higher bandwidth
than industry standards. These cables are ideal for fiber optic backbone connections. They are available in both
riser and plenum versions. Suitable for indoor and outdoor applications.
WESCO #
OFNR
62029698043
62029698044
62029698045
62029698046
62029698047
62029698048
62029698049
62029698050
OFNP
62029698054
62029698055
62029698056
62029698057
62029698058
62029698059
Mfg. #
Fiber
Count
Nom. Dia.
inches (mm)
Max Tensile Loading*
Install
Long Term
lbs (N)
lbs (N)
43018XG01
43024XG01
43036XG01
43048XG01
43060XG01
43072XG01
43096XG01
43144XG01
18
24
36
48
60
72
96
144
0.54
0.52
0.63
0.63
0.69
0.76
0.89
0.98
(13.7)
(13.3)
(15.9)
(15.9)
(17.6)
(19.3)
(22.5)
(25.0)
809 (3600)
674 (3000)
1012 (4500)
899 (4000)
1124 (5000)
1348 (6000)
1798 (8000)
2696 (12000)
404 (1800)
337 (1500)
506 (2250)
449 (2000)
562 (2500)
674 (3000)
899 (4000)
1348 (6000)
8.7 (220)
8.4 (213)
10.0 (254)
10.0 (254)
11.1 (282)
12.2 (309)
14.2 (360)
15.7 (400)
5.4
5.2
6.3
6.3
6.9
7.6
8.9
9.8
(137)
(133)
(159)
(159)
(176)
(193)
(225)
(250)
44018XG01
44024XG01
44036XG01
44048XG01
44060XG01
44072XG01
18
24
36
48
60
72
0.49
0.52
0.61
0.62
0.68
0.74
(12.4)
(13.1)
(15.5)
(15.8)
(17.2)
(18.9)
809 (3600)
674 (3000)
1011 (4500)
899 (4000)
1124 (5000)
1348 (6000)
404
337
506
449
562
674
7.8 (198)
8.3 (210)
9.8 (248)
10.0 (253)
10.8 (275)
11.9 (302)
4.9
5.2
6.1
6.2
6.8
7.4
(124)
(131)
(155)
(158)
(172)
(189)
(1800)
(1500)
(2250)
(2000)
(2500)
(3000)
Min Bend Radius
Install
Long Term
inches
inches
(mm)
(mm)
 Standard jacket colour is orange for multimode and yellow for single mode fiber.
 Hybrid options are also available.
Simplex, Duplex and Quad Fiber Optic Interconnect Cable OFNR/OFNP
Simplex, duplex and quad cables are typically used for patch cords and intra-building installations. Superior Essex
designed these cables for environments where small size, flexible construction and flame resistance are required,
and are available in both riser and plenum versions. Higher performance optical fibers are offered as standard;
including RWP for Single mode, 220/600 62.5 µm multimode and 10G/150 laser optimized 50 µm multimode.
Mfg.#
OFNR
330013101
A30013101
B30023101
C30023101
330023101
330043101
OFNP
340013101
A40013101
B40023101
C40023101
Fiber
Type
Configuration
Fiber
Count
Nom. Dia.
inches (mm)
Nom.
Weight
lbs/kft
(kg/km)
Max Tensile Loading
Install
Long Term
lbs (N)
lbs (N)
Min Bend Radius
Install
Long Term
inches
inches
(mm)
(mm)
RWP
SMF
RWP
SMF
RWP
SMF
RWP
SMF
RWP
SMF
RWP
SMF
Round
1
0.11 (2.9)
4 (6)
100 (440)
30 (132)
2.0 (50)
1.2 (30)
Round
1
0.08 (2.0)
4 (6)
100 (440)
30 (132)
2.0 (50)
1.2 (30)
Zip
2
0.11 x 0.24 (2.9 x 6.2)
8 (12)
100 (440)
30 (132)
2.0 (50)
1.2 (30)
Zip
2
0.08 x 0.17 (2.0 x 4.2)
8 (12)
100 (440)
30 (132)
2.0 (50)
1.2 (30)
Round
2
0.20 (5.0)
14 (21)
150 (660)
45 (200)
3.1 (80)
2.0 (50)
Round
4
0.20 (5.0)
15 (22)
150 (660)
45 (200)
3.1 (80)
2.0 (50)
RWP
SMF
RWP
SMF
RWP
SMF
RWP
SMF
Round
1
0.11 (2.9)
5 (7)
100 (440)
30 (132)
2.0 (50)
1.2 (30)
Round
1
0.08 (2.0)
5 (7)
100 (440)
30 (132)
2.0 (50)
1.2 (30)
Zip
2
0.11 x 0.24 (2.9 x 6.2)
10 (14)
100 (440)
30 (132)
2.0 (50)
1.2 (30)
Zip
2
0.08 x 0.17 (2.0 x 4.2)
129
Enhanced Category 5 System
Unshielded Twisted Pair Cable
• Performance specified to 350 MHz
Exceeds TIA/EIA Category 5E
specifications
• 4 pairs of 24 AWG solid bare copper
conductors
• UL and cUL listed
Reel-in-Box
Pull-in-Box
WESCO # 62101600015
62101600019
62101600021
62101600007 62101600009 62101600011
62101600013
62101695017
62101695019 62101695020
62101695018
Mfg. # 57826-2 57826-6 57826-8 57825-2 57825-4 57825-6 57825-8 6-57825-2 6-57826-2 6-57826-6
6-57825-6
• 5 dB NEXT performance above
Category 5E
• Exceeds all requirements for Gigabit
Ethernet
• Sold in 1000 ft. reel-in-box or pull box
Description 4-Pair Non-Plenum (CMR), Reel-in-Box 4-Pair Non-Plenum (CMR), Reel-in-Box 4-Pair Non-Plenum (CMR), Reel-in-Box 4-Pair Plenum (CMP), Reel-in-Box 4-Pair Plenum (CMP), Reel-in-Box 4-Pair Plenum (CMP), Reel-in-Box 4-Pair Plenum (CMP), Reel-in-Box 4-Pair Plenum (CMP), Pull Box 4-Pair Non-Plenum (CMR), Pull Box
4-Pair Non-Plenum (CMR), Pull Box
Colour
white
blue
yellow
white
gray
blue
yellow
white
white
blue
blue
Category 5e Twisted Pair Cable
• Performance specified to 200 MHz
• Exceeds TIA/EIA Category 5e specifications
130
WESCO # 62101600877
62101600884
62101600875
62101600873
62101600871
62101698110
62101600876
62101600874
• Meets all requirements for Gigabit Ethernet
• Sold in 1000 ft. reel-in-box
Mfg. # 219538-2 219538-4 219538-6 219513-2 219513-6 219513-8 6-219538-2
6-219538-6
Description 4-Pair Non-Plenum (CMR), Reel-in-Box 4-Pair Non-Plenum (CMR), Reel-in-Box 4-Pair Non-Plenum (CMR), Reel-in-Box 4-Pair Plenum (CMP), Reel-in-Box
4-Pair Plenum (CMP), Reel-in-Box 4-Pair Plenum (CMP), Reel-in-Box
Category 5e SL Series RJ-45 Jacks
Thin profile improves outlet density
• Universal labeling permits T568A or B wiring
• Meet or exceed applicable TIA and ISO requirements
• Compatible with 110Connect or SL faceplates
and modules
• Unshielded versions listed below
• Call for ordering information on versions
with integral dust cover or shielded configurations
• UL Listed
WESCO #
62101600971
62101600972
62101600973
62101600974
62101600975
62101600976
62101600977
62101600978
62101600979
62101600980
62101600981
Mfg. #
1375191-1
1375191-2
1375191-3
1375191-4
1375191-5
1375191-6
1375191-7
1375191-8
1375191-9
1-1375191-0
1-1375191-1
Colour
Almond
Black
White
Gray
Orange
Blue
Red
Yellow
Green
Violet
Ivory
Colour
white
gray
blue
white
blue
yellow
white
blue
SL Series Modular Jack Termination Tool
Quicker, easier, and more
precise way to terminate
SL jacks
• Termination tool for SL Series jacks
• Terminates and cuts off all 8 conductors at once
• Simplifies lacing process and speeds terminations
WESCO #
Mfg. #
Description
62101600985
1725150-2
Terminating Tool Frame with Lacing Fixture
62101600987
1673956-1
Lacing Fixture Only
Enhanced Category 5 Cable Assemblies
• 24 AWG stranded conductors
• Part of the AMP NETCONNECT
Cable Assemblies
WESCO # 62101600604
62101600894
62101600445
62101600911
62101600755
62101600533
62101600446
62101600534
62101600447
62101600535
62101600605
62101600931
62101698109
62101695031
62101600835
62101600837
62101695036
62101600845
62101695029
62101600938
Mfg. # 406483-2
406483-3
406483-4
406483-5
406483-6
406483-7
406483-8
1-406483-0
1-406483-2
1-406483-5
2-406483-0
2-406483-5
219242-3
219242-4
219242-5
219242-7 219242-8
1-219242-0 1-219242-2
2-219242-5
• Unshielded coloured boots and cables
• Exceed Category 5 enhanced
performance standards
Description Category 5+ Patch Cable 2 ft.
Category 5+ Patch Cable 3 ft.
Category 5+ Patch Cable 25ft
Colour
black
black
black
black
black
black
black
black
black
black
black
black
blue
blue
blue
blue
blue
blue
blue
blue
Also available in gray, white, orange, green, red and yellow in lengths up to 50 feet.
Call for your particular application.
Patch Panels
• Category 5e patch panels are
engineered and verified as part of
the AMP NETCONNECT Enhanced
Category 5 System
• Patch panels are designed for
performance beyond their respective
level specifications
WESCO #
62101695005
62101600293
62101600294
62101600295
62101600296
Mfg. #
406390-1
406981-1
406330-1
406331-1
406332-1
• Universal wiring – T568A and T568B
wiring patterns combined in one part
number
• Labels and icons for identification and
administration
• Compatible with single- and 5-pair
punchdown tools
Description
Cat 5e 12-port Mini with 89D Bracket
Cat 5e 12-Port 1U
Cat 5e 24-Port 1U
Cat 5e 48-Port 2U
Cat 5e 96-Port 4U
131
Category 6 UTP System
Category 6 UTP
• Exceeds proposed cable specifications
for Category 6
• Performance specifications extended
to frequencies up to 600 MHz
• Exceeds all requirements for Gigabit
Ethernet
WESCO # 62101600762
62101600764
62101600766
62101600768
62101600926
62101698111
62101600927
62101698112
Mfg. # 219560-2
219560-4
219560-6
219560-8
219567-2
219567-4
219567-6
219567-8
• Engineered, tested and certified as
a link and a channel for total system
performance
• Sold in 1000 ft. wooden reel or
reel-in-box
Description 4-Pair Non-Plenum (CMR), Reel-inBox
4-Pair Non-Plenum (CMR), Reel-inBox
4-Pair Plenum (CMP), Reel-inBox
Colour
white
gray
blue
yellow
white
gray
blue
yellow
Category 6 SL Series Jacks
132
• Thin profile improves outlet density
• 180° or 90° cable dress for easy
termination
• Universal wiring for both T568A and
T568B wiring patterns
• Meets or exceeds all TIA and ISO
component performance requirements
• Compatible with 110Connect
Faceplates
• 110Connect Stuffer Caps available
WESCO # 62101698066
62101600863
62101600864
62101698067
62101698068
62101600865
WESCO # 62101698069
62101600895
62101698070
62101698012
62101698013
Mfg. #
1375055-1
1375055-2
1375055-3
1375055-4
1375055-5
1375055-6
Colour
almond
black
white
gray
orange
blue
Mfg. #
1375055-7
1375055-8
1375055-9
1-1375055-0
1-1375055-1
Colour
red
yellow
green
violet
ivory
Category 6 Patch Panels
• Ports may be individually replaced
• Meet or exceed proposed TIA
and ISO Category 6 component
performance requirements
• Universal wiring – may be terminated
to T568A or T568B
• Labels and icons for identification
and administration
WESCO #
Mfg. #
Description
621016 98995
1375013-2
AMP 1375013-2 12P-CAT6-PANEL-BLK
621016 98996
1375014-2
AMP 1375014-2 24P-CAT6-PANEL-BLK-1U
621016 00916
1375015-2
AMP 1375015-2 48P-CAT6-PANEL-BLK
621016 01150
1375016-2
AMP 1375016-2 96P-CAT6-PANEL-BLK-4U
Category 5e and 6 SL Series Angled Patch Panels
Eliminate the need for horizontal cable
management for higher rack densities
• Meet or exceed applicable TIA and ISO performance requirements
• Versions listed below ship with jacks bagged for easy termination
• Can also be ordered with jacks preloaded
Category 5E
WESCO #
62101601151
62101601152
Mfg. #
1499602-2
1499603-2
Description
24P-CAT5e- Angled SL series Patch PANEL-BLK 1U
62101601153
1499610-2
Mfg. #
1499600-2
1499601-2
1499608-2
Description
24P-CAT6- Angled SL series Patch PANEL-BLK 1U
Category 6
WESCO #
62101601154
62101601155
62101601156
SL Series Multimedia Jack Patch Panels
• Accepts unshielded SL Series Jacks and
inserts and shielded SL Series Jacks
WESCO #
Mfg. #
62101698073 1375289-1
62101698074 1375290-1
62101600880 1375291-1
62101600881 1375292-1
• May be used to create custom
configurations
Description
Multimedia 12-port Mini Patch Panel, 10"w x 2.3"h,
mounts vertically on 89D bracket (included)
Multimedia 12-Port 1.75" high
SL Series Modular Jack Patch Panels
• Accepts shielded and unshielded SL
Series Jacks
WESCO #
Mfg. #
62101698008 1116753-1
62101698006 1116749-1
62101698071 1375119-1
62101698009 1116753-2
62101698007 1116749-2
62101698072 1375119-2
• May be used to create custom
configurations
Description
Modular 12-port Mini Patch Panel, 10"w x 2.3"h, mounts vertically on 89D bracket (included), unshielded
Modular 24-Port 1.75" high, unshielded
Modular 48-Port 3.5" high, unshielded
Modular 12-port Mini Patch Panel, 10"w x 2.3"h, mounts vertically on 89D bracket (included), shielded
Modular 24-Port 1.75" high, shielded
Modular 48-Port 3.5" high, shielded
133
Category 6 Cable Assemblies
• Exceed Category 6 draft performance
standards
• 4-pair stranded UTP, 24 AWG conductors
WESCO #
621016 00866
621016 00937
621016 00867
621016 00868
621016 01006
621016 00869
621016 98972
621016 01008
621016 01009
621016 98113
621016 00857
621016 98935
621016 98114
621016 00858
621016 98034
621016 00859
621016 01002
Mfg. #
219884-3
219884-4
219884-5
219884-7
219884-8
1-219884-0
1-219884-5
1-219884-6
2-219884-5
219886-3
219886-4
219886-5
219886-7
219886-8
1-219886-0
1-219886-2
3-219886-0
• Non-Plenum
• Coloured-matched snagless boots
• Universal wiring (T568A/T568B)
Description
Category 6 Patch Cable Snagless 3ft
Colour
black
black
black
black
black
black
black
black
black
blue
blue
blue
blue
blue
blue
blue
blue
Category 6 FTP Cable
134
• Meets or exceeds TIA/EIA-568-B Enhanced Category 6 and ISO11801: 2002
Class E specifications
• Intertek ETL SEMKO Listed (CMR/CMP)
• Independently verified by Intertek ETL SEMKO testing services
• Exceeds all requirements for Gigabit Ethernet
• 23 AWG, solid conductors
Mfg. #
4-1499389-1
4-1499389-5
4-1499389-7
4-1499416-1
4-1499416-5
4-1499416-7
Description
4Pair Cat6 FTP CMR/FT4 Cable, White Jacket
4Pair Cat6 FTP CMR/FT4 Cable, Blue Jacket
4Pair Cat6 FTP CMR/FT4 Cable, Yellow Jacket
4Pair Cat6 FTP CMP/FT6 Cable, White Jacket
4Pair Cat6 FTP CMP/FT6 Cable, Blue Jacket
4Pair Cat6 FTP CMP/FT6 Cable, Yellow Jacket
SL Series AMP-TWIST 6S Modular Jack
• Meets or exceeds TIA/EIA Category 6 and ISO11801: 2002 Class D specifications
• Will allow 10GBase-T (IEEE 802.3an) on 100m channels
• Easy installation with only 2 parts
• Termination time: less than 1 minute (using AMP NETCONNECT SL Series
Termination Tool)
• Patented shield clamp
• Integrated strain relief
• Integrated dust cover
• Re-usable
• Thin profile improves outlet density
• Universal wiring label permits wiring to T568A or T568B
• Compatible with faceplates found in this catalogue
Mfg. #
Description
1711160-1
Cat 6 RJ45 Shielded Modular Jack
Work Area
Hinged Wall Brackets for 19" Panels
• Install with hinges on either side for easier access
• 6" depth brackets are provided with cable tie laces to aid in dressing cables, have
multiple threaded holes allowing more than one panel to be mounted on a bracket,
and rear entry cable holes
WESCO #
621016 00547
621016 95025
621016 00545
Mfg. #
558267-1
558268-1
558269-1
Description
Hinged Wall Mount Bracket 3.25" 2U 6" depth
Mounting Straps
• Fits duplex or decorator-style electrical
faceplates
• Allows for easy mounting of
communications outlets in power poles
and floor pedestals
• Accommodates icons for port
identification
• Accepts jacks and multimedia inserts
• 2- and 3-port straps accept all
SL jacks, 110Connect jacks,
and SL inserts
• 4-port straps accept all SL jacks and
SL inserts only
WESCO #
621016 00743
621016 00744
621016 00745
621016 00746
621016 00742
621016 00810
621016 00811
621016 00812
621016 00813
621016 00814
Mfg. #
1116618-1
1116618-2
1116618-3
1116618-4
1-1116618-1
1339120-1
1339120-2
1339120-3
1339120-4
1-1339120-1
Description
2 Port duplex strap
2 Port duplex strap
2 Port duplex strap
2 Port duplex strap
2 Port duplex strap
4 Port duplex strap
4 Port duplex strap
4 Port duplex strap
4 Port duplex strap
4 Port duplex strap
Colour
almond
black
white
gray
ivory
almond
black
white
gray
ivory
621016 92018
621016 92012
621016 92013
621016 00621
621016 00608
621016 00609
621016 00680
621016 00681
621016 01057
621016 98936
1479784-1
1479784-2
1479784-3
1116616-1
1116616-2
1116616-3
1116616-4
1-1116616-1
1479504-1
1479504-2
2 Port Decora Strap
2 Port Decora Strap
2 Port Decora Strap
3 Port Decora Strap
3 Port Decora Strap
3 Port Decora Strap
3 Port Decora Strap
3 Port Decora Strap
4 Port Decora Strap
4 Port Decora Strap
almond
black
white
almond
black
white
gray
ivory
almond
black
Low Profile Flush Faceplates
• Accepts 110Connect Jacks, SL Series
Jacks, MT-RJ Outlet Jacks and
110Connect Multimedia Inserts
WESCO #
621016 92026
621016 92027
621016 92028
621016 92029
621016 92030
621016 92031
621016 92032
621016 92033
Mfg. #
1479443-1
1479443-3
1479444-1
1479444-3
1479446-1
1479446-3
1479447-1
1479447-3
• Flush mount installation
Description
Flush Faceplate, 1-port, almond
Flush Faceplate, 1-port, white
135
Work Area
Standard Faceplates
• Accepts 110Connect and SL Series
jacks and multimedia inserts
• Icons and labels allow easy identification
• Standard colour is almond — black,
white, gray and electrical ivory also
available
110Connect Faceplates allow easy circuit identification using the AMP NETCONNECT
icon labeling system. All AMP NETCONNECT 110Connect faceplates accept AMP
NETCONNECT 110Connect jacks and inserts and MT-RJ fiber connectors.
WESCO #
Mfg. #
62101600126
557505-1
62101698153
557502-1
62101600130
558088-1
62101600134
557691-1
62101600138
83935-1
62101600142
83936-1
62101698154
558086-1
62101600146
406185-1
Description
Single Gang, 2 Port
Single Gang, 4 Port staggered
(for 110Connect shielded)
Single Gang, 4 Port
Single Gang, 6 Port
Double Gang, 4 Port
Double Gang, 6 Port
Double Gang, 12 Port
Flush-Mount, Single Gang, 4 Port Angled
Colour
almond
almond
almond
almond
almond
almond
almond
almond
X denotes colour (557505-X): -1=Almond, -2=Black, -3=White, -4=Gray, 1- -1=Electrical Ivory
SL Series Faceplates
• Front-loading modules eliminate the
need to remove faceplates from the
wall for changes or repairs
WESCO #
621016 00769
621016 00770
621016 00729
621016 00771
621016 00772
621016 00773
621016 00774
621016 00775
621016 00776
621016 00777
621016 call
136
Mfg. #
1339118-1
1339118-2
1339118-3
1339118-4
1-1339118-1
1339119-1
1339119-2
1339119-3
1339119-4
1-1339119-1
1479486-X
• Accepts three 1U or two 1.5U SL
Series Modules
Description
SL Series Faceplate Single Gang
SL Series Faceplate Double Gang Single
SL Series Double Gang double sided Faceplate
Colour
almond
black
white
gray
ivory
almond
black
white
gray
ivory
SL Series Modules
Snap easily into the front of SL • Front-loading — no need for faceplate
removal
Series faceplates to hold
• 2-port modules accept SL Series and
SL Series inserts
110Connect jacks and inserts (see below)
WESCO #
621016 00730
621016 00731
621016 00732
621016 00733
621016 00734
621016 00739
621016 00735
621016 00736
621016 00737
621016 00738
Mfg. #
1116410-3
1-1116410-1
1116407-3
1-1116407-1
1116409-3
1-1116409-1
1116406-3
1-1116406-1
1116408-3
1-1116408-1
• 3-port modules accept SL Series and
inserts only (see below))
• Also available in black, white, gray,
and electrical ivory Description
Blank Module, 1U
Blank Module, 1U
Blank Module, 1.5U
Blank Module, 1.5U
2 Port Straight Module, 1U
2 Port Straight Module, 1U
2 Port Angled Module, 1.5U
Colour
white
ivory
white
ivory
white
ivory
white
ivory
white
ivory
Angled Faceplates
Accept all SL jacks, 110Connect jacks, and SL inserts
WESCO #
621016 00146
621016 00147
621016 00148
621016 00149
Mfg. #
406185-1
406185-2
406185-3
406185-4
• Icons available
• Also available in black, white, gray, and electrical ivory
Description
4 Port Angled Single Gang Faceplate
Colour
almond
black
white
gray
Work Area
SL Series Inserts
SL Series Copper Inserts
• Compatible with SL Series faceplates,
boxes and mounting straps (see page 13)
• Works with straight or angled faceplate
modules
WESCO #
621016 00815
621016 00816
621016 00817
621016 00818
621016 00819
621016 00552
621016 00549
621016 00830
621016 00831
621016 00832
621016 00833
621016 00834
Mfg. #
1116412-1
1116412-2
1116412-3
1116412-4
1-1116412-1
1499855-1
1499855-3
1339124-1
1339124-2
1339124-3
1339124-4
1-1339124-1
• Easily snaps into SL Series modules
and duplex mounting straps
• Provide connections for different media
types
• Also available in black, white, gray,
and electrical ivory
Description
Blank Module Almond
Blank Module Black
Blank Module White
Blank Module Gray
Blank Module Ivory
F-Connector Modular Insert, almond
F-Connector Modular Insert, white
BNC Coupler Module, almond
BNC Coupler Module, black
BNC Coupler Module, white
BNC Coupler Module, gray
BNC Coupler Module, ivory
SL Series Fiber Insert
• Front-loading inserts eliminate the need for faceplate removal
• Provide connections for different media types
• Also available in black, white, gray, and electrical ivory WESCO #
62101600825
62101600826
62101600827
62101600828
62101600829
621016 01160
621016 01161
Mfg. #
1339123-1
1339123-2
1339123-3
1339123-4
1-1339123-1
1435735-1
1435799-1
Description
ST Coupler Multimode, almond
ST Coupler Multimode, black
ST Coupler Multimode, white
ST Coupler Multimode, gray
ST Coupler Multimode, ivory
LC Coupler Multimode Almond
LC Coupler Singlemode Almond
137
One Piece Surface Boxes
• 1.75" deep
WESCO #
621016 00190
621016 00191
621016 00192
621016 00193
621016 00194
621016 00195
621016 00196
621016 00197
Mfg. #
558251-1
558251-2
558251-3
558251-4
569499-1
569499-2
569499-3
569499-4
Description
Single Gang Surface Box
Double Gang Surface Box
Colour
almond
black
white
gray
almond
black
white
gray
Surface Modular Jack Boxes
• Accept AMP 110Connect Jacks
• Low profile
• Cable or raceway entries
• Accommodates multimedia
WESCO #
621016 00891
621016 00892
621016 00893
621016 00887
621016 00888
621016 00889
621016 00883
Mfg. #
1116697-1
1116697-2
1116697-3
1116698-1
1116698-2
1116698-3
1116698-4
• Compatible with Wiremold 400,
800 and 2300 (6-port only) surface
raceways
• Icons and label for easy identification
Description
1-Port Modular Jack Box
Colour
almond
black
white
almond
black
white
gray
Fiber Optic Solutions
Fiber Optic Cable
Interconnect Fiber Cables
Suitable for pigtails, patch cords, and internal equipment connections
• Aramid yard reinforced
• Also available in simplex, XG,
and singlemode configurations
• UL® and cUL listed
WESCO #
Mfg. #
Description
621016 01181
2-1664014-1
2fibre interconnect Zipcord 50um 2.9mm riser
Fibers
621016 01182
2-1664015-1
2fibre interconnect Zipcord 50um 2.9mm plenum
Tight Buffering
(900µm)
621016 98014
1-1664016-1
2fibre interconnect Zipcord 62.5um 2.9mm riser
621016 98015
1-1664017-1
2fibre interconnect Zipcord 62.5um 2.9mm plenum
Strength Members
Outer Jacket
138
Fiber Distribution Cables
Suitable for horizontal and in-building cabling
• Can be used in interbuilding
applications if buried in conduit below
frost line
• Strippable, 900nm tight buffer enables
Fibers
Tight
Buffering
(900µm)
Strength
Members
Outer
Jacket
easy connectorization
• TIA color-coded fibers
• Also available in 8, 24, 36, 48, 72 fiber,
XG, and singlemode configurations
WESCO #
Mfg. #
Description
621016 98022
1-1664040-1
6 Fibres 4.8mm Riser FT4 62.5/125um Cable
621016 98023
1-1664041-1
6 Fibres 4.8mm Plenum FT6 62.5/125um Cable
621016 98024
1-1664052-1
12 Fibres 4.8mm Riser FT4 62.5/125um Cable
621016 98025
1-1664053-1
12 Fibres 4.8mm Plenum FT6 62.5/125um Cable
621016 92008
2-1664038-1
6 Fibres Riser FT4 50/125um Cable
621016 98030
2-1664039-1
6 Fibres Plenum FT6 50/125um Cable
621016 92009
2-1664050-1
12 Fibres Riser FT4 50/125um Cable
621016 98031
2-1664051-1
12 Fibres Plenum FT6 50/125um Cable
Fiber Indoor/Outdoor Cables
Suitable for in-building and inter-building backbone cabling applications (aerial, duct, or direct buried)
• Central tube design
• Water-blocked buffer tube for protection
• Flame-retardant UV jacket for outdoor applications
• Available in fiber counts from 4 to 144 fibers
Fibers
Water Blocked
Buffer Tube
Strength
Members
Outer Jacket
WESCO #
Mfg. #
Description
621016 92010
2-1664096-5
6 Fibres Indoor/Outdoor Loose Tube FT4 Riser
50/125um
621016 92011
2-1664102-5
12 Fibres Indoor/Outdoor Loose Tube FT4
Riser 50/125um
621016 call
8-1664096-5
6 Fibres Indoor/Outdoor Loose Tube FT4 Riser
XG 10Gig 50/125um
621016 98973
8-1664102-5
Riser XG 10Gig 50/125um
621016 01180
1664101-5
Riser Singlemode
139
Wall Mount Fiber Optic Enclosures 12- and 24-Fiber Capacity
• Rugged, all-steel construction with
enamel finish
• Internal cable management rings and
securing devices included
• Accepts two or four snap-in adapter
plates to accommodate 12- or 24 fibers
• Reversible cable strain relief bracket
• Loop storage area provided for
distribution cables
• Standard colour is black – also
available in almond
WESCO #
Mfg. #
Description
62101600321
559560-2
Unloaded Wall Mount Enclosure with Side Door, 12-24F
62101600322
559561-2
Unloaded Wall Mount Enclosure with Side Door, 24-48F
62101698178
559561-3
Unloaded Wall Mount Enclosure with Lock
and Flat Tie Holders, 24-48F
1U Fully Loaded Fixed-Style Fiber Optic Rack Mount Enclosure & Accessories
• Designed for flush mounting in racks or cabinets
• Comes pre-loaded with SC or ST-style couplers
WESCO #
62101698107
62101600930
62101698108
62101698127
Accessories
62101698032
62101698033
62101600747
• Standard colour is black – also available in almond
• Cable strain relief and management rings available
separately
Mfg. #
2-1206109-4
4-1206109-4
2-1206136-4
4-1206136-4
Description
6-Port, 12 Fiber ST Style Rack Mount Enclosure, 1U
12-Port, 24 Fiber ST Style Rack Mount Enclosure, 1U
6-Port, 12 Fiber SC Rack Mount Enclosure, 1U
12-Port, 24 Fiber SC Rack Mount Enclosure, 1U
1206144-1
1206145-1
1206146-1
3.5 - 8mm Cable Strain Relief
9 - 14mm Cable Strain Relief
Cable Management Rings Kit
1U Unloaded Drawer-Style Fiber Optic Rack Mount Enclosure
• Designed for forward, flush or
recessed mounting
• Slide and tilt drawer and quick release
front panel provided easy access to
interior of enclosure
140
WESCO # 62101600934
• Accepts 3 snap-in adapter plates or
MPO cassettes
• Cable strain relief and management
rings included
Mfg. #
Description
1348876-4 Unloaded Drawer Style Rack Mount Enclosure
Snap-in Fiber Optic Adapter Plates
• Holds up to 6- or 12-fibers, depending
on adapter
• For use in AMP NETCONNECT fiber
optic panels and enclosures
WESCO #
Mfg. #
Description
62101600308
559558-1
6-Fiber, Duplex SC Multimode
62101600307
559516-1
62101698177
559517-1
6-Fiber, Simplex SC Singlemode
62101695023
559601-1
6-Fiber, Duplex SC to ST Style Multimode
62101600305
559557-1
6-Fiber, ST Style Multimode
62101600306
559515-2
6-Fiber, ST Style Singlemode
62101698179
559596-1
62101698180
559596-2
12-Fiber, Duplex SC Singlemode
62101698045
1278368-1
12-Fiber, Duplex SC to ST Style Multimode/Singlemode
62101698054
1278567-1
12-Fiber, ST Style Multimode
62101698055
1278567-2
12-Fiber, ST Style Singlemode
62101600754
559523-1
Blank Snap-In Adapter Plate
62101601131
1374463-1 6-Fiber, Duplex LC Singlemode
62101601133
1374463-3 6-Fiber, Duplex LC Multimode
LightCrimp Plus SC and ST-Style Connectors
• No epoxy and no polishing required
• Compliant with TIA/EIA, IEC, CECC
and EN standards
• Consistent performance over a range
of temperatures
• Termination tool kits available –
contact your local WESCO Branch for
ordering information
• Strip, cleave, and crimp
• LC for 900nm and 250nm fibers
• ST and SC fit 900um, 250um, and
3mm cables
• Also available in XG and singlemode
configurations • New LC design is half the size of the
SC
WESCO #
Mfg. #
Description
Colour
621016 98998
6754483-1
Simplex LC for 62.5/125 Multimode
beige
621016 98997
6754483-2
Simplex LC for 50/125 Multimode
beige
621016 01130
6754483-3
Simplex LC 50um XG 10 Gig
grey
621016 01165
6754485-1
Duplex LC for 62.5/125 Multimode
beige
621016 01166
6754485-2
Duplex LC for 50/125 Multimode
beige
621016 00348
5492643-1
Simplex SC for 62.5/125 Multimode
beige
621016 00879
6278079-1
Simplex SC for 50/125 Multimode
beige
621016 01167
6278009-1
Duplex SC for 62.5/125 Multimode
beige
621016 01168
6278080-1
Duplex SC for 50/125 Multimode
beige
621016 00347
5492642-1
ST for 62.5/125 Multimode
metallic
621016 01169
6278082-1
ST for 50/125 Multimode
metallic
141
Fiber Optic Patch Cable Assemblies
• Various lengths available
• Connectors feature ceramic
or polymer ferrules
• 62.5µm fiber optic cable
• Two-fiber assemblies
Wesco #
Mfg. #
Description
621016 00407
5503994-1
ST to ST Duplex Patch Cable, 62.5/125um, 1 m
621016 00409
5503994-3
ST to ST Duplex Patch Cable, 62.5/125um, 3 m
621016 98957
5503995-2
ST to ST Ceramic Duplex Patch Cable, 62.5/125um, 2m
621016 98956
5503995-3
ST to ST Ceramic Duplex Patch Cable, 62.5/125um, 3 m
621016 98955
5503995-5
ST to ST Ceramic Duplex Patch Cable, 62.5/125um, 5 m
621016 00412
5492250-1
SC to ST Duplex Patch Cable, 62.5/125um, 1m
621016 00414
5492250-3
SC to ST Duplex Patch Cable, 62.5/125um, 3 m
621016 00417
5492249-1
SC to SC Duplex Patch Cable, 62.5/125um, 1 m
621016 00419
5492249-3
SC to SC Duplex Patch Cable, 62.5/125um, 3 m
621016 00896
5504969-3
SC to SC Duplex Patch Cable, 50/125um, 3 m
621016 98961
5503162-3
ST to ST Duplex Patch Cable, Singlemode, 3m
621016 98960
5503162-4
621016 98959
5503162-5
621016 00429
5492020-3
SC to ST Duplex Patch Cable, Singlemode, 3m
621016 98958
1907381-5
ST Simplex Pigtail, Singlemode 5m
Point System Modular Media Converter Chassis
The Point System is a cost effective, fully configurable, managed
modular media conversion platform that provides users with the
flexibility to build their own custom media conversion system.
• Cost Savings
• Flexibility
• Maximum Manageability
• Reliability
• Potential for Future Growth
• Pay as You Add Fiber to Your Network
WESCO #
Mfr.'s Model No.
Description
64817700847
CPSMC1900-100
19-slot Point System chassis
64817701078
CPSMC0800-100
8-slot Point System chassis
64817700621
CPSMC0100-200
Single-slot Point System chassis
64817700672
CPSMM-120
Single Slot Primary Management Module
Point System Modular Media Converter Cards
142
Converters supporting various communication protocols can be
used in the same chassis and provide managed media conversion
services to suit a custom network application
• Cost Effective Network Migration
• Extend Life of Network Infrastructure
• Increase Data Transmission Distances
WESCO #
Mfr.'s Model No.
Description
Network Protocol
64817700703
CBFTF1011-100
10/100 Base-TX to 100 Base-FX, 1300nm MM (ST), 2km
10/100 Bridging
64817700700
CBFTF1013-100
10/100 Base-TX to 100 Base-FX, 1300nm MM (SC), 2km
10/100 Bridging
64817700706
CBFTF1014-100
10/100 Base-TX to 100 Base-FX, 1310nm SM (SC), 20km
10/100 Bridging
64817700835
CFETF1011-105
100 Base-TX to 100 Base-FX, 1300nm MM (ST), 2km
Fast Ethernet
64817700836
CFETF1013-105
100 Base-TX to 100 Base-FX, 1300nm MM (SC), 2km
Fast Ethernet
64817700837
CFETF1014-105
100 Base-TX to 100 Base-FX, 1310nm SM (SC), 20km
Fast Ethernet
64817700294
CGETF1013-110
1000 Base-T to 1000 Base-SX, 1300nm MM (SC), 220m
Gigabit Ethernet
64817700312
CGETF1039-110
1000 Base-T to 1000 Base-SX, 1300nm MM (LC), 220m
Gigabit Ethernet
64817700295
CGETF1014-110
1000 Base-T to 1000 Base-LX, 1310nm SM (SC), 10km
Gigabit Ethernet
Stand Alone Media Converters
Media converters are used to connect devices in a mixed cabling environment. When fiber optic cable is being integrated into a UTP network,
media converters can be used to make easy and affordable connections
between the fiber cable and RJ-45 ports.
• Ethernet in the First Mile
• Fiber to the Premise
WESCO #
64817700296
64817700997
64817700998
64817701658
64817700676
64817700680
64817701396
64817700681
64817700319
64817700352
64817700320
Mfr.'s Model No.
E-TBT-FRL-05
E-TBT-FRL-05(SC)
E-TBT-FRL-05(SM)
J/E-CX-TBT-02
E-100BTX-FX-05
E-100BTX-FX-05(SC)
E-100BTX-FX-05(LC)
E-100BTX-FX-05(SM)
SGETF1013-110
SGETF1039-110
SGETF1014-110
Description
10 Base-T to 10 Base-FL, 850nm MM (ST), 2km
10 Base-T to 10 Base-FL, 850nm MM (SC), 2km
10 Base-T to 10 Base-FL, 1310nm SM (SC), 20 km
10 Base-T (RJ45) to 10BASE2 (BNC)
100 Base-TX to 100 Base-FX, 1300nm MM (ST), 2km
100 Base-TX to 100 Base-FX, 1300nm MM (SC), 2km
100 Base-TX to 100 Base-FX, 1300nm MM (LC), 2km
100 Base-TX to 100 Base-FX, 1310nm SM (SC), 20km
1000 Base-T to 1000 Base-SX, 850nm MM (SC), 220m
1000 Base-T to 1000 Base-SX, 850nm MM (LC), 220m
1000 Base-T to 1000 Base-LX, 1310nm SM (SC), 10km
Network Protocol
Ethernet
Ethernet
Ethernet
Ethernet
Fast Ethernet
Fast Ethernet
Fast Ethernet
Fast Ethernet
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
143
Remotely Managed Stand Alone Media Converter
Remotely Manage Converters
• Ethernet in the First Mile
• Fiber to the Premise
WESCO #
64817700108
Mfr.'s Model No.
SFBRM1011-100
64817700379
SFBRM1013-100
64817700380
SFBRM1014-100
64817702335
SBFFG1013-100
64817702336
SBFFG1014-100
Description
10/100 Base-TX to 100 Base-FX, 1300nm MM (ST),
2km
10/100 Base-TX to 100 Base-FX, 1300nm MM (SC),
2km
10/100 Base-TX to 100 Base-FX, 1310nm SM (SC),
20km
10/100/1000 Base-T to 1000 Base-SX, 1300nm MM
(SC), 2km
10/100/1000 Base-T to 1000 Base-LX, 1310nm SM
(SC), 10km
Network Protocol
10/100 Bridging
10/100 Bridging
10/100 Bridging
10/100/1000
Bridging
10/100/1000
Bridging
Unmanaged Fast Ethernet and Gigabit Switches
• Auto-negotiating for full or half duplex
• Flow control and back pressure
• Store and forward switching mode
• All Ports Auto MDI/MDIX
• Ruggedized Chassis
• Straight Forward Diagnostics
WESCO #
Mfr.'s Model No.
Description
64817702248
MIL-S500
10/100 Mbps 5 Port UTP Switch
64817701613
MIL-S800
78496492757
MIL-S2400S
64817700025
MIL-S24T2GPA
10/100/1000 Mbps 24 Port UTP Switch w/ 2 SFP Ports
Managed Fast Ethernet and Gigabit Switches
• Non-blocking Full Wire Speed Performance
• Store-and-Forward Architecture
• VLAN Tagging
• Class of Service
• Auto MDI-MDIX
• Port Mirroring
• Web-Based Management
• IGMP/GVRP
• TFTP Firmware Upgrade
144
WESCO #
Mfr.'s Model No.
Description
64817702247
MIL-SM800P
8 Port 10/100 Layer 2 Managed Switch
78496492811
MIL-SM801G
8 Port 10/100 Layer 2 Managed Switch with Gigabit Uplink Port
64817700021
MIL-SM2401M-STK
24 Port 10/100 Layer 2 Managed Switch with Dual Port Uplink
Power Over Ethernet Media Converters and Switches
Deliver Unified Supply of Data, Voice, and Video as well as
Electrical Power Through a Single Source
• 48 VDC PSE Output Voltage
• IEEE802.3af Compliant Power Sourcing Equipment (PSE)
• Overcurrent Protection
• Preservation of Cabling Infrastructure
WESCO #
64817700263
64817700264
64817700265
64817702254
78496492987
78496492995
64817702266
Mfr.'s Model No.
SPOEB1011-100
SPOEB1013-100
SPOEB1014-100
MIL-L100i
MIL-L800i
MIL-L100s
MIL-SM2401MAF
Description
10/100Base-TX to 100Base-FX, 1300nm MM (ST), 2km
10/100Base-TX to 100Base-FX, 1300nm MM (SC), 2km
10/100Base-TX to 100Base-FX, 1310nm SM (SC), 20km
1 Port Power over Ethernet Injector
8 Port Power over Ethernet Injector
1 Port Dual Voltage Power over Ethernet Power/Data Splitter
24 Port 10/100 POE Layer 2 Remotely Managed Switch
Welcome to Wirewerks
Founded in 1991 in Lachine Quebec, Wirewerks has been providing fiber optic
cabling solutions to end users, integrators and distributors for over a decade.
The key to our success has been our commitment to quality. All components
are produced in our ISO 9001 – 2000 (as well as ISO 14000) facility. Each
Wirewerks product must pass stringent quality control tests and is shipped with
actual test results rather than typical. In addition, Wirewerks products comply
with all EIA/TIA and IEEE standards. We back up our commitment to quality
with a lifetime warranty on all our cabling products.
Wirewerks Fiber Optic Wall Mount Panels
145
Wirewerks wall mount panels are easily mounted to any wall using
the internal mounting holes. They are available in two versions-one
accommodating 2 adapter strips or modules and another for up to 4
strips or modules.
Features:
• Convertible to locking door
• Easy access to cable and patch cords
• Adapter strips or modules accommodated
WESCO #
Mfg. #
Dimension
Foot print
Strips/ modules
Fibers
Description
62828401664
PP-WM2S
13’’x3.5’’x9.2’’
13.0Wx9.2H
2
48
Wall mount panel-small
62828401665
PP-WM4S
14’’x3.5’’x11.5’’
14.0Wx11.5H
4
96
Wall mount panel-large
Cable Once Solution
Wirewerks Fiber Optic Rack Mount Panels
Wirewerks rack mount enclosures are designed
for direct termination of up to 144 fibers. They are
fabricated from sheet steel and finished in a light
texture black powder coat finish. Included in all of our
patch panels are 4 mounting screws, 4 x 4” plastic tie
wraps, radiation sticker, 4 x 2” cable managers with
adhesive bottom and port identification labels.
Features:
• Adaptable to 19’’ or 23’’ standard racks
• Easy access from front or back
• Effective slack management
• Adapter strips or modules accommodated
1U Fiber Optic Rack Mount Panel
Features:
• Can be used with either 19” or 23” rack.
• Holds up to 3 strips / modules for a maximum capacity of 72 fibers.
WESCO #
62828401659
146
Mfg. #
Dimension
Rack size
Strips /modules
Nb of fibers
Description
PP-W1U1
17x14x1.74
19’’ and 23’’
3
72
1U Rack mount panel
Features:
WESCO #
62828401660
Mfg. #
Dimension
Rack size
Strips /modules
Nb of fibers
Description
PP-W2U1
17x14x3.47
19’’ and 23’’
6
144
2U Rack mount panel
Features:
WESCO #
62828401661
Mfg. #
Dimension
Rack size
Strips /modules
Nb of fibers
Description
PP-W4U1
17x14x6.97
19’’ and 23’’
12
288
4U Rack mount panel
Cable Once Solution
Wirewerks Adapter strips
Our compact adapter strips accommodate all standard connector and fiber
types, single mode, multi mode and laser optimized 10 gigabit fiber types and
LC, MTRJ, SC and ST connector types. The two types of strips, type A and type
C snap easily into position in 2 industry standard patch panel types with robust
push pins. Type A is compatible with Wirewerks rack mount and wall mount
panels.
Features:
Type A
6.125” x 1.37”
WESCO #
Type C
5.10” x 1.15”
•
•
•
•
2 industry standard sizes to choose from
Silk screened fiber idents on both sides
Wide variety of adapter quantity and type
Easy to snap into panels
Mfg. #
Description
62828401672
AS-WL12M
Adapter Strip, LC Duplex, 12 Fiber, 6 Port, MM PB, 50 or 62.5
62828401673
AS-WL12G
Adapter Strip, LC Duplex, 12 Fiber, 6 Port, MM 10G
62828401674
AS-WL12S
Adapter Strip, LC Duplex, 12 Fiber, 6 Port, SM ceramic
62828401675
AS-WL24M
Adapter Strip, LC Quad, 24 Fiber, 6 Port, MM PB, 50 or 62.5
62828401676
AS-WL24G
Adapter Strip, LC Quad, 24 Fiber, 6 Port, MM10G
62828401677
AS-WL24S
Adapter Strip, LC Quad, 24 Fiber, 6 Port, SM ceramic
62828401678
AS-WC12M
Adapter Strip, SC Duplex, 12 Fiber 6 Port, MM PB, 50 or 62.5
62828401679
AS-WC12G
Adapter Strip, SC Duplex, 12 Fiber, 6 Port, MM 10G
62828401680
AS-WC12S
Adapter Strip, SC Duplex, 12 Fiber, 6 Port, SM ceramic
62828401681
AS-WC12A
Adapter Strip, SC APC Duplex, 12 Fiber, 6 Port, SM ceramic
62828401682
AS-WC06M
Adapter Strip, SC Simplex, 6 Fiber, 6 Port,MM PB, 50 or 62.5
62828401684
AS-WC06G
Adapter Strip, SC Simplex, 6 Fiber, 6 Port, MM 10G
62828401685
AS-WC06S
Adapter Strip, SC Simplex, 6 Fiber, 6 Port, SM ceramic
62828401686
AS-WC06A
Adapter Strip, SC APC Simplex, 6 Fiber, 6 Port, SM ceramic
62828401687
AS-WR12M
Adapter Strip, MTRJ, 12 Fiber, 6 port, MM, 50 or 62.5
62828401757
AS-WR12S
Adapter Strip, MTRJ, 12 Fiber, 6 port, SM ceramic
62828401688
AS-WR240
Adapter Strip, MTRJ, 24 Fiber, 12 port, MM, 50 or 62.5
62828401758
AS-WR24S
Adapter Strip, MTRJ, 24 Fiber, 12 port, SM ceramic
62828401691
AS-WT06M
Adapter Strip, ST, 6 Fiber, 6 Port, MM PB, 50 or 62.5
62828401692
AS-WT06S
Adapter Strip, ST, 6 Fiber, 6 Port, SM ceramic
62828401693
AS-W0000
Adapter Strip, Blank
147
Cable Once Solution
Wirewerks Distribution modules
Wirewerks’ distribution modules provide enclosed modular fan-out assemblies for today’s plug and play systems.
These modules have MPO/MTP adapters on the rear face, and multiple single or double fiber adapters on the
front face. Inside, a high quality MPO/MTP to single or double fiber connector fan-out provides the optical circuit to
interconnect the front and rear adapters.
Features:
• Compatible with the most common panels
• Quick easy, tool-less mounting
• Complete optical testing
WESCO #
148
Mfg. #
Description
62828401718
DM-1MSCB12
Distribution Module, 12 Fiber (SM) with SC Connectors on front end and 1 MPO (M)
connector on the back
62828401719
DM-1MLCB12
Distribution Module, 12 Fiber (SM) with LC Connectors on front end and 1 MPO (M)
62828401720
DM-1MSCB24
Distribution Module, 24 Fiber (SM) with SC Connectors on front end and 2 MPO (M)
62828401721
DM-1MLCB24
Distribution Module, 24 Fiber (SM) with LC Connectors on front end and 2 MPO (M)
62828401759
DM-4MSCC12
Distribution Module, 12 Fiber (MM 50µm 10gig) with SC Connectors on front end
and 1 MPO (M) connector on the back
62828401760
DM-4MLCC12
Distribution Module, 12 Fiber (MM 50µm 10gig) with LC Connectors on front end and
1 MPO (M) connector on the back
62828401761
DM-4MSCC24
Distribution Module, 24 Fiber (MM 50µm 10gig) with SC Connectors on front end
and 2 MPO (M) connector on the back
62828401762
DM-4MLCC24
Distribution Module, 24 Fiber (MM 50µm 10gig) with LC Connectors on front end and
2 MPO (M) connector on the back
Splice Tray
Wirewerks stackable plastic splice tray offers a unique and flexible splice and storage system. It is designed to hold
up to 12 fibers and can be mounted into most fiber optic panels using standard mounting screws.
Each tray is supplied with a cover to protect the splices and prevent them from becoming damaged or being misplaced.
Features:
• Slimline, stackable design allows higher splice density
• Twelve fusion splices per tray
• Modular splice holder of six splices
• Minimum fiber bending radius maintained
• Ease of installation
WESCO #
Mfg. #
Description
62828401815
SP-MSPL6
12 position metal splice tray with plastic clear cover.
4''x7'' stackable (2 soft foam removable inserts)
62828401816
SP-MSPL12
12 position metal splice tray with plastic clear cover.
4''x12'' stackable (2 soft foam removable inserts)
62828401666
SP-WS12A
12 position stackable black plastic splice tray. 5''x7''
Fiber Optic Patch Cords
Our fiber optic patch cords are factory terminated, assembled, tested and inspected prior to shipment. These
assemblies meet IEC, JIS and Belcore GR-326 performance requirements as applicable. All Wirewerks patch cords
are RoHS compliant. Custom patch cord assemblies are also available upon request.
Features:
• Wide variety of configurations available
• Sample listing of stock below
Description
LC to LC Duplex, 1m
LC to LC Duplex, 2m
LC to LC Duplex, 3m
LC to LC Duplex, 5m
LC to LC Duplex, 10m
LC to SC Duplex, 1m
LC to SC Duplex, 2m
LC to SC Duplex, 3m
LC to SC Duplex, 5m
LC to SC Duplex, 10m
LC to ST Duplex, 1m
LC to ST Duplex, 2m
LC to ST Duplex, 3m
LC to ST Duplex, 5m
LC to ST Duplex, 10m
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
50/125um
62828400107
PC-3A-LCCLCC-001
62828400108
PC-3A-LCCLCC-002
62828400109
PC-3A-LCCLCC-003
62828400110
PC-3A-LCCLCC-005
62828400111
PC-3A-LCCLCC-010
62828400112
PC-3A-LCCLCC-015
62828400178
PC-3A-LCCLCC-020
62828400179
PC-3A-LCCLCC-030
62828401058
PC-3A-LCCSCC-001
62828401059
PC-3A-LCCSCC-002
62828401060
PC-3A-LCCSCC-003
62828400123
PC-3A-LCCSCC-005
62828400124
PC-3A-LCCSCC-010
62828401067
PC-3A-LCCSCC-015
62828401068
PC-3A-LCCSCC-020
62828401070
PC-3A-LCCSCC-030
62828400192
PC-3A-LCCSTC-001
62828400193
PC-3A-LCCSTC-002
62828400194
PC-3A-LCCSTC-003
62828400195
PC-3A-LCCSTC-005
62828400196
PC-3A-LCCSTC-010
62828400197
62.5/125um
62828400101
PC-2A-LCCLCC-001
62828400102
PC-2A-LCCLCC-002
62828400103
PC-2A-LCCLCC-003
62828400104
PC-2A-LCCLCC-005
62828400105
PC-2A-LCCLCC-010
62828400106
PC-2A-LCCLCC-015
62828400176
PC-2A-LCCLCC-020
62828400177
PC-2A-LCCLCC-030
62828400113
PC-2A-LCCSCC-001
62828400114
PC-2A-LCCSCC-002
62828400115
PC-2A-LCCSCC-003
62828400116
PC-2A-LCCSCC-005
62828400117
PC-2A-LCCSCC-010
62828400118
PC-2A-LCCSCC-015
62828400186
PC-2A-LCCSCC-020
62828400187
PC-2A-LCCSCC-030
62828400126
PC-2A-LCCSTC-001
62828400127
PC-2A-LCCSTC-002
62828400128
PC-2A-LCCSTC-003
62828400129
PC-2A-LCCSTC-005
62828400130
PC-2A-LCCSTC-010
62828400131
50/125um 10 Gig
62828400138
PC-4A-LCCLCC-001
62828400139
PC-4A-LCCLCC-002
62828400140
PC-4A-LCCLCC-003
62828400141
PC-4A-LCCLCC-005
62828400142
PC-4A-LCCLCC-010
62828400143
PC-4A-LCCLCC-015
62828400263
PC-4A-LCCLCC-020
62828400264
PC-4A-LCCLCC-030
62828400144
PC-4A-LCCSCC-001
62828400145
PC-4A-LCCSCC-002
62828401081
PC-4A-LCCSCC-003
62828400147
PC-4A-LCCSCC-005
62828400148
PC-4A-LCCSCC-010
62828400149
PC-4A-LCCSCC-015
62828400265
PC-4A-LCCSCC-020
62828400266
PC-4A-LCCSCC-030
62828400612
PC-4A-LCCSTC-001
62828400615
PC-4A-LCCSTC-002
62828400616
PC-4A-LCCSTC-003
62828400617
PC-4A-LCCSTC-005
62828400618
PC-4A-LCCSTC-010
62828400619
Singlemode
62828400244
PC-1A-LCBLCB-001
62828400245
PC-1A-LCBLCB-002
62828400246
PC-1A-LCBLCB-003
62828400247
PC-1A-LCBLCB-005
62828400248
PC-1A-LCBLCB-010
62828400249
PC-1A-LCBLCB-015
62828400250
PC-1A-LCBLCB-020
62828400251
PC-1A-LCBLCB-030
62828400236
PC-1A-LCBSCB-001
62828400237
PC-1A-LCBSCB-002
62828400238
PC-1A-LCBSCB-003
62828400239
PC-1A-LCBSCB-005
62828400240
PC-1A-LCBSCB-010
62828400241
PC-1A-LCBSCB-015
62828400242
PC-1A-LCBSCB-020
62828400243
PC-1A-LCBSCB-030
62828400252
PC-1A-LCBSTB-001
62828400253
PC-1A-LCBSTB-002
62828400254
PC-1A-LCBSTB-003
62828400255
PC-1A-LCBSTB-005
62828400256
PC-1A-LCBSTB-010
62828400257
;
149
Fiber Optic Patch Cords
Description
SC to SC Duplex, 1m
SC to SC Duplex, 2m
SC to SC Duplex, 3m
SC to SC Duplex, 5m
SC to SC Duplex, 10m
SC to ST Duplex, 1m
SC to ST Duplex, 2m
SC to ST Duplex, 3m
150
SC to ST Duplex, 5m
SC to ST Duplex, 10m
ST to ST Duplex, 1m
ST to ST Duplex, 2m
ST to ST Duplex, 3m
ST to ST Duplex, 5m
ST to ST Duplex, 10m
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
WESCO #
Mfg. #
50/125um
PC-3A-LCCSTC-015
62828400198
PC-3A-LCCSTC-020
62828400199
PC-3A-LCCSTC-030
62828400166
PC-3A-SCCSCC-001
62828400167
PC-3A-SCCSCC-002
62828400168
PC-3A-SCCSCC-003
62828400169
PC-3A-SCCSCC-005
62828400170
PC-3A-SCCSCC-010
62828400171
PC-3A-SCCSCC-015
62828400172
PC-3A-SCCSCC-020
62828400173
PC-3A-SCCSCC-030
62.5/125um
PC-2A-LCCSTC-015
62828400190
PC-2A-LCCSTC-020
62828400191
PC-2A-LCCSTC-030
62828400486
PC-2A-SCCSCC-001
62828400487
PC-2A-SCCSCC-002
62828400488
PC-2A-SCCSCC-003
62828400489
PC-2A-SCCSCC-005
62828400491
PC-2A-SCCSCC-010
62828400492
PC-2A-SCCSCC-015
62828400164
PC-2A-SCCSCC-020
62828400165
PC-2A-SCCSCC-030
62828400493
PC-2A-SCCSTC-001
62828400494
PC-2A-SCCSTC-002
62828400495
PC-2A-SCCSTC-003
62828400496
PC-2A-SCCSTC-005
62828400498
PC-2A-SCCSTC-010
62828400499
PC-2A-SCCSTC-015
62828400174
PC-2A-SCCSTC-020
62828400175
PC-2A-SCCSTC-030
62828400464
PC-2A-STCSTC-001
62828400466
PC-2A-STCSTC-002
62828400467
PC-2A-STCSTC-003
62828400468
PC-2A-STCSTC-005
62828400470
PC-2A-STCSTC-010
62828400471
PC-2A-STCSTC-015
62828400162
PC-2A-STCSTC-020
62828400163
PC-2A-STCSTC-030
50/125um 10 Gig
PC-4A-LCCSTC-015
62828400620
PC-4A-LCCSTC-020
62828400622
PC-4A-LCCSTC-030
62828400132
PC-4A-SCCSCC-001
62828400133
PC-4A-SCCSCC-002
62828400134
PC-4A-SCCSCC-003
62828400135
PC-4A-SCCSCC-005
62828400136
PC-4A-SCCSCC-010
62828400137
PC-4A-SCCSCC-015
62828400260
PC-4A-SCCSCC-020
62828400261
PC-4A-SCCSCC-030
62828400623
PC-4A-SCCSTC-001
62828400624
PC-4A-SCCSTC-002
62828400625
PC-4A-SCCSTC-003
62828400626
PC-4A-SCCSTC-005
62828400160
PC-4A-SCCSTC-010
62828400161
PC-4A-SCCSTC-015
62828400629
PC-4A-SCCSTC-020
62828400630
PC-4A-SCCSTC-030
Singlemode
PC-1A-LCBSTB-015
62828400258
PC-1A-LCBSTB-020
62828400259
PC-1A-LCBSTB-030
62828401429
PC-1A-SCBSCB-001
62828400214
PC-1A-SCBSCB-002
62828400462
PC-1A-SCBSCB-003
62828400214
PC-1A-SCBSCB-005
62828400216
PC-1A-SCBSCB-010
62828400217
PC-1A-SCBSCB-015
62828400218
PC-1A-SCBSCB-020
62828400219
PC-1A-SCBSCB-030
62828400220
PC-1A-SCBSTB-001
62828400221
PC-1A-SCBSTB-002
62828400222
PC-1A-SCBSTB-003
62828400223
PC-1A-SCBSTB-005
62828400224
PC-1A-SCBSTB-010
62828400225
PC-1A-SCBSTB-015
62828400226
PC-1A-SCBSTB-020
62828400227
PC-1A-SCBSTB-030
62828400228
PC-1A-STBSTB-001
62828400229
PC-1A-STBSTB-002
62828400230
PC-1A-STBSTB-003
62828400231
PC-1A-STBSTB-005
62828400232
PC-1A-STBSTB-010
62828400233
PC-1A-STBSTB-015
62828400234
PC-1A-STBSTB-020
62828400235
PC-1A-STBSTB-030
Cable Assemblies
Wirewerks pre-terminated fiber optic cable assemblies
are engineered for the most demanding applications
to meet the customer’s most rigorous performance
requirements.
Features:
•
•
•
•
Effective pull kits available
Wide variety of configurations
Short lead times on stocked items
Custom assemblies available
Item
SM
PC
ММ
UPC
APC
62.5/125
50/125
50/125 10G
Insertion Loss*, Single Fiber Conn.
0.2dB Max. (0.15dB typ.)
Insertion Loss*, MTRJ, MPOs
Return Loss
≥ 45 dB
≥ 55 dB
Durability
≥ 65 dB
na
0.2 dB max increase
Operating Temp.
-40 ºC to +85ºC
Storage temp.
-40 ºC to +85ºC
Ordering Information:
A
F
B
C
D
E
F
G
H
I
J
K
L
151
A
A - Core Size
B - Cable Type
C - Cable Rating
D - # Fiber
E - Branch OD
F - Branch Length
1=Singlemode
IO=Indoor/Outdoor
N=Non Armored
04=4 fibers
9=APC
XXN= XX inches
2=62.5/125
DI=Distribution
A=Armored
06=6 fibers
3=3mm
XXM= XX meters
3=50/125
BR=Breakout
P=Plenum
08=8 fibers
2=2mm
4=50/125 10Gig
LT=Loose TubeR=
R=Riser
12=12 fibers
L - Length in M
RI=Ribbon
Z=LSZH
18=18 fibers
K - Accessory
G - Conn. #1
TA=Tactical
O=Other
24=24 fibers
0=none
SC=SC
AD=ADSS
36=36 fibers
1=1 Pull kit
ST=ST
RT=Ribbon LT
I - Conn. #2
48=48 fibers
2=2 Pull kits
LC=LC
RO=Ribbon I/O
SC=SC
72=72 fibers
ST=ST
96=96 fibers
C4=144 fibers
FC=FC
MT=MTRJ
H - Polish #1
LC=LC
S5=SMA905
A=APC
FC=FC
S6=SMA906
B=UPC
MT=MTRJ
J - Polish #2
MU=MU
C=PC
S5=SMA905
A=APC
E2=E2000
S6=SMA906
B=UPC
ES=ESCON
MU=MU
C=PC
FD=FDDI
E2=E2000
D4=D4
ES=ESCON
MP=MTP/MPO
FD=FDDI
XXX= XXX meters
D4=D4
MP=MTP/MPO
OE=Pigtail
Copper Patch Cords
Wirewerks offers a wide variety of category 5E, category 6, and cross
over copper patch cords. They are 4 pair 24 AWG stranded cables with
snag-less molded connectors and integral strain relief. Pins are plated
with 50um of gold. Sample listing of product below with many more
types and colours available.
Item
Description
Standards
100% tested & inspected
C(UL) and UL certified to meet EIA/TIA 568-A.4
EIA/TIA 568A and B compatibility available
ISO/IEC 11801 Compliant
Bandwidth
WESCO #
350 MHz
Mfg. #
Description
Colour
Category 6 Patch Cords
152
WESCO #
Mfg. #
Description
Category 5E Patch Cords
628284 01348
CAT-06AYL-001
Cat6 Patch Cord, 1ft
yellow
628284 00280
CAT-5EAYL-001
Cat5E Patch Cord, 1ft
628284 01367
CAT-06APR-002
purple
628284 00183
CAT-5EAPR-002
628284 01332
CAT-06AWH-002
white
628284 00286
CAT-5EAWH-002
628284 00370
CAT-06ABL-003
blue
628284 00289
CAT-5EABL-003
628284 00369
CAT-06AGR-003
green
628284 00291
CAT-5EAGR-003
628284 00185
CAT-06AGY-003
gray
628284 00290
CAT-5EAGY-003
628284 01368
CAT-06APR-003
purple
628284 00184
CAT-5EAPR-003
628284 00371
CAT-06ARD-003
red
628284 00577
CAT-5EARD-003
628284 00372
CAT-06AWH-003
white
628284 00293
CAT-5EAWH-003
628284 00373
CAT-06AYL-003
yellow
628284 00294
CAT-5EAYL-003
628284 00375
CAT-06ABL-004
blue
628284 00296
CAT-5EABL-004
628284 00374
CAT-06AGR-004
green
628284 00298
CAT-5EAGR-004
628284 00272
CAT-06AGY-004
gray
628284 00297
CAT-5EAGY-004
628284 00376
CAT-06ARD-004
red
628284 00578
CAT-5EARD-004
628284 00377
CAT-06AWH-004
white
628284 00300
CAT-5EAWH-004
628284 00378
CAT-06AYL-004
yellow
628284 00301
CAT-5EAYL-004
628284 00380
CAT-06ABL-005
blue
628284 00303
CAT-5EABL-005
628284 00379
CAT-06AGR-005
green
628284 00305
CAT-5EAGR-005
628284 00271
CAT-06AGY-005
gray
628284 00304
CAT-5EAGY-005
628284 01370
CAT-06APR-005
purple
628284 00560
CAT-5EAPR-005
628284 00381
CAT-06ARD-005
red
628284 00579
CAT-5EARD-005
628284 00382
CAT-06AWH-005
white
628284 00307
CAT-5EAWH-005
628284 00383
CAT-06AYL-005
yellow
628284 00308
CAT-5EAYL-005
628284 00125
CAT-06ABL-006
blue
628284 00310
CAT-5EABL-006
628284 01323
CAT-06AGY-006
gray
628284 00311
CAT-5EAGY-006
628284 00385
CAT-06ABL-007
blue
628284 00317
CAT-5EABL-007
628284 00384
CAT-06AGR-007
green
628284 00319
CAT-5EAGR-007
628284 00270
CAT-06AGY-007
gray
628284 00318
CAT-5EAGY-007
628284 01372
CAT-06APR-007
purple
628284 00562
CAT-5EAPR-007
628284 00386
CAT-06ARD-007
red
628284 00581
CAT-5EARD-007
;
Copper Patch Cords
WESCO #
Mfg. #
Description
Colour
WESCO #
Mfg. #
Description
628284 00387
CAT-06AWH-007
white
628284 00321
CAT-5EAWH-007
628284 00388
CAT-06AYL-007
yellow
628284 00322
CAT-5EAYL-007
628284 00390
CAT-06ABL-010
blue
628284 00324
CAT-5EABL-010
628284 00389
CAT-06AGR-010
green
628284 00326
CAT-5EAGR-010
628284 00269
CAT-06AGY-010
gray
628284 00325
CAT-5EAGY-010
628284 01374
CAT-06APR-010
purple
628284 00563
CAT-5EAPR-010
628284 00391
CAT-06ARD-010
red
628284 00582
CAT-5EARD-010
628284 00392
CAT-06AWH-010
white
628284 00328
CAT-5EAWH-010
628284 00393
CAT-06AYL-010
yellow
628284 00330
CAT-5EAYL-010
628284 00395
CAT-06ABL-015
blue
628284 00332
CAT-5EABL-015
628284 00394
CAT-06AGR-015
green
628284 00334
CAT-5EAGR-015
628284 00267
CAT-06AGY-015
gray
628284 00333
CAT-5EAGY-015
628284 01375
CAT-06APR-015
purple
628284 00275
CAT-5EAPR-015
628284 00396
CAT-06ARD-015
red
628284 00583
CAT-5EARD-015
628284 00397
CAT-06AWH-015
white
628284 00336
CAT-5EAWH-015
628284 00398
CAT-06AYL-015
yellow
628284 00337
CAT-5EAYL-015
628284 00400
CAT-06ABL-025
blue
628284 00339
CAT-5EABL-025
628284 00399
CAT-06AGR-025
green
628284 00341
CAT-5EAGR-025
628284 00180
CAT-06AGY-025
gray
628284 00340
CAT-5EAGY-025
628284 00401
CAT-06ARD-025
red
628284 00584
CAT-5EARD-025
628284 00402
CAT-06AWH-025
white
628284 00343
CAT-5EAWH-025
628284 00403
CAT-06AYL-025
yellow
628284 00344
CAT-5EAYL-025
628284 00405
CAT-06ABL-050
blue
628284 00346
CAT-5EABL-050
628284 00404
CAT-06AGR-050
green
628284 00348
CAT-5EAGR-050
628284 00181
CAT-06AGY-050
gray
628284 00347
CAT-5EAGY-050
628284 00406
CAT-06ARD-050
red
628284 00585
CAT-5EARD-050
628284 00407
CAT-06AWH-050
white
628284 00350
CAT-5EAWH-050
628284 00408
CAT-06AYL-050
yellow
628284 00351
CAT-5EAYL-050
628284 00410
CAT-06ABL-100
blue
628284 00360
CAT-5EABL-100
628284 00409
CAT-06AGR-100
green
628284 00362
CAT-5EAGR-100
628284 01329
CAT-06AGY-100
gray
628284 00361
CAT-5EAGY-100
628284 00412
CAT-06AWH-100
white
628284 00364
CAT-5EAWH-100
628284 00413
CAT-06AYL-100
yellow
628284 00365
CAT-5EAYL-100
Cross Over Patch Cords
Cross Over Patch Cords
628284 01811
CAT-06CARD-004
Cat6 Cross Over Patch Cord
red
628284 00366
CAT-5CARD-004
Cat5E Cross Over Patch
Cord
628284 01812
CAT-06CARD-007
red
628284 00367
CAT-5CARD-007
Cord
628284 01806
CAT-06CARD-010
red
628284 00368
CAT-5CARD-010
Cord
153
2178 Fiber Optic Splice Closure Family
The 3M™ Fiber Optic Splice Closure 2178 family can be effectively
used in nearly any environment including aerial (pole or strand
mount), central office vault, manhole, pedestal and handhole. It can
accommodate all splicing methods (mechanical and fusion) as well
as inline and butt splicing configurations.
The 2178 family is designed with larger and smaller
interchangeable closure halves so you can select the size case that
meets your needs today but with the flexibility to expand for the
future.
154
WESCO #
05111519003
Mfg.#
2178-XSB
05113857777
2178-S
05113857778
2178-LS
05113870842
2178-LL
05113888927
2178-XL
Size in. (mm)
14.6 x 10.1 x 4.6
(369.8 x 256.5 x 117.3)
21.9 x 8.5 x 4.7
(556.3 x 215.9 x 119.4)
21.9 x 8.5 x 8.0
(556.3 x 215.9 x 203.2)
21.9 x 8.5 x 11.3
(556.3 x 215.9 x 287.0)
26.0 x 13.3 x 11.0
(660.4 x 336.6 x 279.4)
Splice
Configuration
Butt
Cable Entry
Ports
3 Butt
Inline
Butt
Inline
Butt
Inline
Butt
Inline
Butt
4 Inline
2 Butt
4 Inline
2 Butt
4 Inline
2 Butt
8 Inline
4 Butt
Maximum Splice Capacity
48 Single Fusion
144 Mass Fusion
96 Single Fusion
288 Mass Fusion
288 Single Fusion
864 Mass Fusion
288 Single Fusion
864 Mass Fusion
576 Single Fusion
1728 Mass Fusion
Fiber Dome Splicing and Terminal Closures
The new compact 3M™ Fiber Dome Terminals and
closures are hermetically sealed for aerial, buried
above-grade, and buried below-grade applications.
The compact terminal closure requires no special
tools, which can reduce tooling costs and allow
for easy installation and re- entry. The fixed
o-ring sealing system and innovative latching
mechanism provide simple, error-free closure
sealing and re-entry.
WESCO #
05111519188
05111519189
05111522826
05111519182
05111519183
05111522827
05111519184
05111519207
Mfg.#
FDC-08S-B-01-X-01A-C
FDC-08S-B-01-X-02B-C
FDC-08S-C-00-2-01A-C
FDT-08S-B-00-X-1A-A-X-04-EPAA
FDT-08S-B-00-X-1A-A-X-04-EPAC
FDT-08SB-00-X-1A-A-X-06-EPAA
FDT-08S-B-00-X-1A-A-X-06-EPXA
FDT-08S-E-00-X-1A-A
05111521575
FDT-08S-E-00-X-1A-A-X-04-EPXA
Description
Fiber Dome Splice Closure w/2538 Tray, 3 Ground lugs
Fiber Dome Splice Closure w/2539 Tray, 3 Ground lugs
Fiber Dome Splice Closure w/2538 Tray, 2-18mm ECAM, 3 Ground lugs
Fiber Dome Terminal w/2538 Tray, 4-Ext. SC Adapter w/Pigtails
Fiber Dome Terminal w/2538 Tray, 4-Ext. SC Adapter w/Ribbon
Fiber Dome Terminal w/2538 Tray, 6-Ext. SC Adapter w/Pigtails
Fiber Dome Terminal w/2538 Tray, 6-Ext. SC/APC Adapter w/Pigtails
Fiber Dome Terminal w/ 2538 Tray, 8-12mm ECAM, Ground lug (Direct
Splice)
Fiber Dome Terminal w/ 2538 Tray, 8-12mm ECAM, 4-Internal SC/APC
pigtails and couplings
3M™ Fiberlok™ II Splicing
The 3M™ Fibrlok™ II 2529 optical fiber splice provides a precise, simple and
low cost method of splicing optical fiber. The splice design utilizes an articulated
metallic splicing element held inside a molded plastic body and cap to provide a
fast, permanent, low-loss splice.
Assembly of the inexpensive Fibrlok II splice requires only removal of the fiber
coating, and cleaning and cleaving of the fiber. Whether your application is
aerial, buried, underground or pedestal; outside plant or inside building; the 2529
universal optical fiber splice is the ideal solution for all your splicing needs.
Benefits
•
•
•
•
High performance, <0.1 dB insertion loss
Increased productivity
Universal – one splice for 250µm and 900µm fibers
Minimal tooling investment
WESCO #
Mfg.#
Description
05400792202
2529
Universal Optical Fiber Splice (6/pkg)
05400792415
2529-K
Universal Optical Fiber Splice Kit (60 Splices, one 2501 Assembly Tool)
05400757125
2501
Assembly Tool only
05400770996
2530
Fiber Splice Preparation Kit (includes 2501 Assembly Tool and Ilsintech CI-01A Cleaving Tool)
05400771107
2531
Fiber Splice Preparation Kit (includes 2501 Assembly Tool; without Cleaving Tool)
05111530001
2534
Fiber Cleaver only (Ilsintech CI-01A)
155
3M™ Fibrlok™ II Splice/Holder 2539
3M™ Fibrlok™ II splice/holder integrates the 3M™ Fibrlok™ II splice
2529, actuation tool, and holder all in one package. It enables fast, on-site
installation without a separate assembly tool or splice tray.
Benefits
• Integrated tool and holder eliminates need for tool and splice tray
• Universal – one splice for 250µm and 900µm fibers
• High performance, <0.1 dB insertion loss
The Fibrlok II splice/holder is also available with a pre-terminated SC/APC
or SC/UPC pigtail (0.75meters/ 30 inches) for easy installation. Pigtail is
fabricated with 10mm radius, bend insensitive, zero water peak fiber.
WESCO #
Mfg.#
Description
05111521516
2539
Fibrlok II Splice/Holder (60/pkg)
05111522860
2539-SC/APC
Fibrlok II Splice/Holder with SC/APC Pigtail (12/pkg)
05111522861
2539-SC/UPC
Fibrlok II Splice/Holder with SC/UPC Pigtail (12/pkg)
3M™ Hot Melt Fiber Optic Connectors
3M Hot Melt Fiber Optic Connectors have a proven track record of high yield and reliable performance in both
indoor and outdoor local area networks around the world.
6100
6600-S
Benefits
• No epoxy mixing, no pot life, ready to install
• Fast termination time
• Low loss, <0.2 dB field insertion loss <typical>
WESCO #
05111516146
05111518707
05113811516
05400791141
05400791725
05111519027
05111519029
05113836650
05113857747
05111519034
05111519036
Mfg.#
6365
6650-LC
6850-A
6100
6300
6600-S
6601-D
8100YS
8300
8600-S
8601-D
Description
Universal Hot Melt Termination Kit
Hot Melt Expansion Kit
One step polishing machine
Hot Melt Connector, ST, Multi Mode
Hot Melt Connector, SC, Multi Mode
Hot Melt Connector, LC, Multi Mode, Simplex
Hot Melt Connector, LC, Multi Mode, Duplex
Hot Melt Connector, ST Single Mode
Hot Melt Connector, SC for Single Mode
Hot Melt Connector, LC, Single Mode, Simplex
Hot Melt Connector, LC, Single Mode, Duplex
3M™ No Polish Fiber Optic SC Connectors
The No Polish SC compatible connector consists of a factory-polished ceramic ferrule, fiber stub and a
mechanical splice that is installed with a simple field tool.
156
8800
Benefits
• Fast, easy installation without requiring a field polish
• No small loose parts
8865-C • Assembly tool eliminates need to touch bare fiber
• Low loss, <0.3 dB field insertion loss <typical>
WESCO #
05111530002
05111530003
05111522799
05111530012
05111530013
8865-AT
Mfg.#
8865
8865-C
8865-AT
6800-50
6800-50/LOMMF
05111525823 6800-62.5
05111530014 8800
Description
No Polish Connector Kit
No Polish Connector Kit with Cleaver
No Polish Connector Assy Tool only
No Polish Connector, SC Multi Mode 50µm
No Polish Connector, SC Laser Optimized
Multi Mode 50µm
No Polish Connector, SC Multi Mode 62.5µm
No Polish Connector, Single Mode
3M™ Crimplok™ Fiber Optic Connectors
The Crimplok™ connector combines the speed of non-adhesive connectors with the performance characteristics
of epoxy and hot melt connectors.
6900
WESCO #
Mfg.#
Description
05113858238
6955
Crimplok Field Termination Kit
05400792815
6900
Crimplok Connector SC, Multi Mode
05400792813
6901
Crimplok Connector ST, Multi Mode
05113875386
8900
Crimplok Connector SC, Single Mode
05113875388
8901
Crimplok Connector ST, Single Mode
3M™ Fiber Optic Distribution Panels
The 8400 series fiber distribution system is designed to provide cross-connect and interconnect between
incoming fiber distribution cables and fiber optic equipment. The system provides choices for rack- or wall-mount
applications using a common set of coupling plates. The plates are available in common connector styles, single
mode and multi mode, both simplex and duplex. All components are of durable galvanized steel with baked
powder-coated epoxy paint.
Benefits
• Couplings pre-mounted on interchangeable coupling plates
• Durable powder coated galvanized steel construction
• Efficient use of space
WESCO #
Mfg.#
Description
05113836618
8425
Fiber Optic Distribution Unit 72 Port
05113858056
8432
12 Port Wall Mount Patch Panel
05113858057
8434
24 Port Wall Mount Patch Panel
05113858058
8436
36/48 Port Wall Mount Patch Panel
05113858271
8423
12/24 Port Rack Mount Patch Panel 1U
05113858272
8423-EXP
12/24 Port 1U Expander for 8423
WESCO #
Mfg.#
Description
05113857410
8406-CM
Coupling Plate, 6 Port, SC, Multi Mode
05113857411
8406-CS
Coupling Plate, 6 Port, SC, Single Mode
05113857527
8406-TM
Coupling Plate, 6 Port, ST, Multi Mode
05113836621
8406-TS
Coupling Plate, 6 Port, ST, Single Mode
05113857412
8408-CM
Coupling Plate, 8 Port, SC, Multi Mode
05113857413
8408-CS
Coupling Plate, 8 Port, SC, Single Mode
05113857528
8408-TM
05113836623
8408-TS
05113857409
8412-DCM
Coupling Plate, 12 Port, SC, Multi Mode (Duplex)
05113857418
8412-DCS
Coupling Plate, 12 Port, SC, Single Mode (Duplex)
05113857414
8412-TM
05400757415
8412-TS
For more information about these and other 3M Fiber Optic Communications Products
visit
www.3M.com/fiber
157
Solutions for
WESCO delivers
delivers SUPPLY
CHAIN
SOLUTIONS
NATIONAL
ACCOUNTS
CUSTOMERS
Tools to Optimize Your Supply Chain
Reduce Costs - Increase Availability - Lower Inventory
Point of use control systems
Job site trailers
Inventory matching and
analysis tools
Web enabled store room
management systems
Cost centre reporting
Product rationalization and
standardization
On line catalogues, custom
catalogues and custom
connectivity
Transaction cost analysis
Vendor managed inventory
WESCO is continuously developing and
improving on tools and processes to solve
supply chain problems.
158
E - Stock
E-Stock is WESCO's innovative, web-enabled
system that can be rapidly implemented to help
you analyze inventory data, set optimum reorder
points and print bar-coded labels to apply to
bins and shelves in a storeroom. Using an
advanced hand-held scanning device, you can
generate and transmit replenishment orders for
delivery on a just-in-time basis.
WESCO Direct.ca
WESCO Direct Canada, is a powerful tool that enables you to increase ordering efficiency,
deploy secure Internet purchasing and gain around-the-clock access to critical information.
The site provides the features, flexibility, and technology to support our customers’ most
complex procurement functions.
Key features:
Powerful Product Search
Customized Shopping Lists
Quick Order Entry
Complete Item Detail
Real-Time Price and Availability
Account Customization
Comprehensive Order History
Flexible Payment Methods
Quotation Request
Advanced Filter
159
Over 22,000 Canadian items
with the most complete descriptions
in the industry
Vending Machine Solution
We now have a vending machine solution to help control
and track inventory and manage assets at point of use.
Support key supply chain initiatives like:
Lean manufacturing
Cell-based manufacturing
Vendor-Managed Inventory (VMI)
Keep-full programs
A Low-Cost, Automated Solution to
Control, Track and Manage Inventories
and Critical Assets at the Point-of-Use
WESCO delivers DISTRIBUTION SOLUTIONS
WESCO provides technical support and distribution solutions
for Canada’s foremost electrical supply base. Our people, our
National branch network, and our leading edge supply chain
programs help customers in industrial, construction and CIG
markets reduce costs, improve supply chain performance,
work smarter and win more projects.
On Time On Budget Construction Projects
WESCO's experienced and dedicated local project teams are essential partners on Canada's most
successful construction projects. Our administrative skills, buying power and technical expertise make
WESCO the leading supplier of electrical, lighting and data communication products to the industry.
Reduced MRO Procurement Costs
WESCO is the leading provider of electrical MRO programs in North America, serving users in every
major industry. Whether you need reliable local service or global coordination, our broad range of supply chain programs are tailored to meet your performance goals.
Successful Industrial Automation Projects
160
WESCO's automation specialists provide expert technical assistance, from concept through to operation, to ensure you meet your automation project objectives. Our wide product offering, local availability and unbiased product advice help make Industrial Ethernet and other major protocols work for
you.
International Sourcing Solutions
WESCO's international sourcing team combines expertise in project coordination, export documentation, and currency exchange, with a thorough knowledge of international product standards. We can
assure you of quality products that will meet your specifications, with on time worldwide delivery, at
the lowest available global cost.
Open for Government Business
WESCO supports the broadest assortment of electrical and data communication products for government and institutional buyers. From network connectivity to airport lighting, we understand the unique
requirements of public sector business and service your specific needs from a branch near you.
High Speed Network Solutions
WESCO's Datacomm specialists provide complete support for installation and maintenance of high
performance structured cabling networks. We are your one stop local source for leading brands like
Belden, Tyco, Panduit, Superior Essex and Fluke.
Confidential
APPLICATION FOR BUSINESS CREDIT
FROM WESCO DISTRIBUTION CANADA LP
On the basis of the following data, I/we hereby apply to WESCO
Distribution Canada LP for credit accommodations. The information as
submitted is true and correct according to our best knowledge and
belief.
Company
Name
Telephone #: (
Street
Name
P.O. Box
City/ State or Prov./Zip or Postal Code
Credit Limit
Requested:
Type of
Business
[ ] Sole Proprietorship
[ ] Partnership
[ ] Corporation:_____ Division or _____ Subsidiary of:
OWNERS, PARTNERS or OFFICERS:
Name/Title
)
Fax #:
(
)
IF OVER $5000, ATTACH RECENT
FINANCIAL STATEMENT.
Date
Established:
City/Province______________
Name/Title
REFERENCES – () Trade references and (1) Bank reference:
Trade
Ref:
Trade
Ref:
City/Province:
City/Province:
Phone: (
Trade
Ref:
)
Fax: (
)
Phone: (
Bank
Ref:
City/Province:
Phone: (
)
)
] Taxable
)
Fax: (
)
161
City/Province:
Fax: (
)
Phone: (
)
TAX STATUS
[
Fax: (
WESCO GST #: R17549101
[
] Exempt
[
] Exemption Number (Please attach copy of valid certificate)
Standard terms and Conditions of sale appear on the reverse side (or page two) of this application. It is agreed that sales of products by WESCO
Distribution Canada LP (Wesco) will be based on these terms and conditions. Terms of payment are net 30 days. It is understood and agreed that
past due balances are subject to service charges at the rate of 2% per month (24% per annum). In assessing your creditworthiness and extending
credit to you, you hereby authorize Wesco to disclose and collect your personal information to and from credit reporting agencies, credit bureaus,
financial institutions, your creditors, and to and from entities that you have identified on your credit application form. You are not required to provide
your social insurance number to us but if you do, it will be used to match credit bureau information.
SIGNATURE
TITLE (President I Vice President I Partner/Proprietor)
Date
WESCO INTERNAL USE ONLY
Br #:
Approved:
DPC:
D&B Rating:
Cons. Code:
Duns #:
Credit Limit:
Date:
TERMS AND CONDITIONS OF APPLICATION FOR BUSINESS CREDIT
Applicant hereby represents, warrants, agrees and acknowledges the following as is appropriate:
1. WESCO Distribution Canada LP (WESCO) and any of its employees, officers or agents (collectively, “WESCO Parties”) hereby are authorized to contact the trade and bank references identified in this Application and to obtain such additional information as they may require concerning
Applicant’s creditworthiness, and Applicant hereby waives any and all claims against, and fully releases from liability, and and all WESCO Parties with respect to any such inquiry.
2. Any representatives of any of the trade or bank references identified in this Application are authorized to disclose to the WESCO Parties any information pertaining to Applicant’s credit history requested by any WESCO Parties including, without limitation, information regarding Applicant’s loans,
accounts, purchases or other financial transactions involving the bank or trade reference in the past, present, and future, and Applicant hereby waives any and all claims against, and fully releases from liability, any such representatives with respect to any such disclosure.
3. At any time while this Application is pending and throughout any period during which WESCO has extended credit to Applicant for which it has not yet been reimbursed, WESCO may obtain credit reports regarding Applicant in connection with the extension or continuation of credit provided in
connection with this Application.
4. Applicant will give WESCO at least 15 calendar days’ prior written notice of any development that may adversely affect Applicant’s financial condition, including, without limitation, (a) the institution by or against Applicant of proceedings in bankruptcy or any other procedure for the settlement of
debts, (b) Applicant’s making an assignment for the benefit of its creditors, (c) Applicant’s inability to pay Applicant’s expenses as they accrue due to lack of sufficient funds, (d) Applicant’s dissolution or other event pursuant to which it ceases to do business, and (e) any change in the business form
in which Applicant conducts business, such as the incorporation of a sole proprietorship, (f) the addition of a partner to a partnership, limited partnership, limited liability partnership, or a limited liability partnership, or (g) the addition of members to a limited liability corporation.
5. WESCO may cancel or modify Applicant’s credit granted as a result of this Application at any time in WESCO’s sole and absolute discretion.
6. Upon WESCO’s request at any time, Applicant shall provide to WESCO, within ten business days, Applicant’s most current regularly prepared financial statements, including, without limitation, a full and complete statement of Applicant’s assets and liabilities.
7. WESCO is authorized to share information regarding the extension of credit pursuant to this Application, including, without limitation, Applicant’s future credit record with WESCO, with any credit-reporting agency if such information is specifically requested from WESCO.
8. The Application sets forth all of the terms and conditions applicable to the parties relating to the matters specified in this Application and supercedes all prior and contemporaneous agreements and understandings, negotiations, inducements, representations or conditions, whether oral or written,
with respect to such matters.
NOTES
162
Branch
Address
Western Region
Abbotsford, BC
Burnaby, BC Castlegar, BC
Fort St. John, BC
Kamloops, BC
Kelowna, BC
Nanaimo, BC
Prince George, BC
Richmond, BC
Surrey, BC
Victoria, BC
Vancouver, BC
Calgary, AB
Edmonton, AB
South Edmonton, AB
Fort McMurray, AB
Grande Prairie, AB
Lloydminster, AB
Red Deer, AB
Regina, SK
Saskatoon, SK
Winnipeg, MB
Telephone
Fax
34377 Marshall Road V2S 6Y3
6000 Lougheed Highway V5B 4V6
2328 - 6th Avenue V1N 2W1
#1- 11427 Alaska Road V1J 6N2
961A Laval Crescent V2C 5P4
1936 Kent Road V1Y 7S1
1809 Fremont Road V9S 3H3
2223 Nicholson Street North V2N 1V9
3331 Viking Way, # 9 V6V 1X7
201-12844 Anvill Way V3W 8E7
481 Cecelia Road V8T 4T4
1055 Clark Drive V5L 3K1
810 - 59th Avenue South East T2H 2G5 11641 - 151st Street T5M 4E6
8720 - 53rd Avenue T6E 5G2
385 Mackenzie Boulevard T9H 5E2
11491 – 98 Ave T8V 5S5
5901 47th Street, Unit A T9V 2G4
# 1, 7743 - 50th Avenue T4P 1M7
1625 - 8th Avenue S4R 1E6
2911 Faithfull Avenue S7K 8E8
1099 King Edward Street R3H 0R3
604-859-3111
604-299-5566
250-365-0545
250-261-6738
250-374-2112
250-862-8200
250-758-1777
250-562-3306
604-270-7873
604-599-1100
250-382-7265
604-215-2078
403-253-7561
780-452-7920
780-450-1717
780-799-4337
780-539-2110
780-870-9206
403-343-2113
306-525-5841
306-242-1296
204-633-3000
604-859-5396
604-299-5547
250-365-0969
250-261-6702
250-372-8044
250-860-0060
250-758-2429
250-562-4832
604-273-3299
604-599-1119
250-382-5334
604-215-2041
403-258-0210
780-451-2195
780-450-4769
780-799-4475
780-539-2120
780-870-9278
403-340-8210
306-347-0706
306-934-6561
204-633-9157
Central/Atlantic Region
Hamilton, ON
Kingston, ON
Kitchener, ON
London, ON
Markham, ON
Markham, ON (Datacomm) Mississauga, ON
Ottawa, ON
Sarnia, ON
Sudbury, ON
Timmins, ON
Thunder Bay, ON
Windsor, ON
Moncton, NB
Dartmouth, NS
Sydney, NS
St. John’s, NFLD
Québec Region
Baie-Comeau, QC
Chicoutimi, QC
Dorval, QC (Intergrated Supply)
Laval, QC
Longueuil, QC
Quebec, QC Rimouski, QC
Sept-Iles, QC
Sherbrooke, QC
St-Jean-sur-Richelieu, QC
St-Laurent, QC
Trois-Rivières, QC
Val D’Or, QC
1910 Barton Street East L8H 2Y6
640 Cataraqui Woods Drive K7P 2Y5
10 Goodrich Drive N2C 2K8
353 Sovereign Road N6A 4C3
475 Hood Road L3R 0S8
475 Hood Road L3R 0S8
281 Traders Boulevard East L4Z 2E5
2320 St. Laurent Boulevard K1G 6C4
567 Vidal Street South N7T 7J9
48 Pacific Avenue P3C 3H9
1355 Riverside Drive P4R 1A6
930 Alloy Drive P7B 6A4 3250 Electricity Drive N8W 5J1
400 Edinburgh Drive E1E 2L1
133 Ilsley Avenue - Unit T B3B 1S9
1097 Upper Prince Street B1P 5P5
95 O’Leary Avenue A1B 2C9
905-545-0313
613-389-1662
519-893-6630
519-659-9990
905-415-6100
905-415-6100
905-890-3344
613-733-2500
519-336-0722
705-673-8413
705-264-5566
807-622-0638
519-948-9888
506-857-8600
902-468-5851
902-562-5556
709-726-9073
905-545-0877
613-389-3274
519-893-4611
519-451-9607
905-415-8723
905-415-9315
905-890-8533
613-733-9223
519-336-2499
705-673-1845
705-264-1522
807-623-2786
519-948-8750
506-858-0546
902-468-2960
902-562-2322
709-726-8490
53, boul. Comeau G4Z 3A7
418-296-8232
1190 rue Manic G7K 1A2
418-549-0368
1330 Transcanadienne Sud, Suite 200 H9P 1H7 514-685-0555
3469 boul. Industriel H7L 4S3
450-901-3041
2404 rue de la Province J4G 1G1
450-928-9372
255 rue Fortin, Suite100 G1M 3M2
418-527-8855
170 rue Industrielle G5M 1A5
418-724-9224
253 avenue Joliette G4R 2A8
418-962-6552
144 rue Léger J1L 1L9
819-823-9918
365 Grand Bernier Nord J3B 4R9
450-347-5324
655 rue Gougeon H4T 2B4
514-343-8383
2435 Sidbec Sud G8Z 4M6
819-691-4212
1510, 4e rue J9P 6X2
819-824-8877
418-296-8458
418-549-7048
514-685-0645
450-901-3032 450-928-1367
418-527-9372
418-724-2541
418-962-8639
819-829-1477
450-347-9541
514-343-8399
819-691-2666
819-824-8847
For more information call 1-866-WESCOCA (937-2622)
or visit our web site at www.wesco.ca.
163
1 (866) WESCO CA (937-2622) • www.wesco.ca
Locator #: 62-0299-58025

WBuyers Guide

Transcription

Similar documents

Serving Los Angeles County

Hazmasters has added a new branch location in Sudbury, Ontario to

In This Issue...Hand Tools

WESCO-EECOL South America brochure

EESCO Keeps Your Business Moving

Serving customers around the corner and around the world!

- Included with Park Millennium Cable TV Package

Table of Contents

Power Packaging Solutions from Hamby Young

How to make a saddle rack