AquaCycle A200.indd

The AquaCycle A200 thickener offers efficient primary stage water
treatment specifically for sand, quarry and recycling processes. The
introduction of this system brings significant cost savings as it reduces
the area previously required to accommodate ponds or lagoons and
also reduces the volume of fresh water required to feed your washing
plant by up to 90%.
Key Features:
• Fully automatic high rate thickener
• Mild Steel tank, supporting structure and conditioning rakes supplied
as standard
• Static bridge to mount motor / gearbox / heavy duty shaft and rake
assembly, with full walkway access
• Fully pre-assembled and factory tested automatic desludge facility
as standard - activated when sludge is sufficiently high - including automatic flushing of sludge pipework
after de-sludging cycle
• Clean water can be removed from the peripheral weir as specified to suit customer’s onsite needs
• Backwash flushing system in place as standard to clear any potential blockages
Product Features:
Standard Features :
• RAL 5015 Blue paint colour
• Fully automatic
• Supporting structure
• Conditioning rakes
• Automatic desludge facility
• Weir location chosen to suit customer requirements
• Galvanised stairs and bridge
• Backwash flushing system
• Warman sludge pump
• Fixed bridge
• Deaeration chamber
• Multipoint flocculent dosing
• Appropriate FlocStation
• 6m Insulated Control Cabin
• PLC Control Panel
Optional Extras :
• Remove 6m Insulated Control Cabin
• Upgrade to 12m Insulated Control Cabin
• Remove AquaCycle Control Panel
• Remove FlocStation Controls
• Remove Appropriate FlocStation
• Auto Floc poly dosing monitoring unit
• Non-standard RAL Paint Colour
Basic Information
A200
200 m3/hr
10 T/hr
3/2
11 kW
2.2 kW
11 T
120 T
3.62 m
3.64
see diagram
5685
Model :
Max Feed Rate :
Sludge Flow Rate :
Sludge Pump :
Sludge Pump Power Req :
Rakes Power Req :
Weight - Empty :
Weight - Full :
Feed Height :
Clean Water Discharge Height :
Dimensions :
8150
6000
How It Works ...
Feed Material In
Flocculent added
Sludge Thickens
and Sinks
Rakes Rotate Along
Tank Floor
Clean Water Overflows
Tank and Recirculated
Thickened sludge
pumped to next stage
The Floc Station will work in conjunction with the AquaCycle A200
Thickener, preparing the Polyelectrolyte to the required optimum
concentration before pumping to the AquaCycle.
The Poly dosing system is widely used throughout the quarrying
industry for waste-water control. The basic operation of the Floc Station
is to mix powdered polyelectrolyte with clean potable water for use in
the sludge thickening process. The operation sequence of the Floc
Station is fully automatic and is controlled by level probes, located inside
each tank.
Key Features:
• Loading hopper for (powder based) polyelectrolyte complete with
screw-feeder
• Powder educter system with cone to transfer powder to make-up tank
• Mixing tank with lid incorporating:
-- Stirring / agitating unit twin propellers
-- Level electrodes
• Transfer pump to convey matured polyelectrolyte to storage tank
• Storage tank incorporating level electrodes
• Dosing pump complete with:
-- In line dilution facility
-- Variable speed gearboxes
• Plant will require a potable water supply for polyelectrolyte make-up
• Plant pre-tested and installed in control cabin
Product Features:
Standard Features :
• Integrated feed hopper and auger
• Fully prewired
• Integrated water, mixing and dosing tanks
• Poly dosing pump
• Fully automatic
• Control panel for standalone FlocStation
Optional Extras :
• 6m Insulated Cabin
• Remove FlocStation Control Panel & Pre wire (inc. Isolator / Emergency Stop Unit)
• Auto Floc Poly Dosing Monitoring Station
Basic Information
Model :
Water Required :
Power Requirement :
Weight - Empty :
Weight - Full :
Dimensions :
P25
2.5 m3/hr
3.23 kW
0.5 T
3T
see diagram
1680
3050
2 x 40 ft
1 x 40 ft
Transport Details
OT / EL
HC / EL
945
OT = Open Top
HC = High Cube
EL = Euroliner / STD road trailer
Transport details include for AquaCycle complete with a FlocStation, PLC control panel and control cabin
CDE Ireland Ltd, Ballyreagh Industrial Estate, Cookstown, Co Tyrone, BT80 9DG | www.cdeglobal.com
| [email protected]