Facade - Semco

Transcription

Facade - Semco

SEMCOGLAS | FACADE DESIGN
Facade
Architecture of light
02 CONTENTS
SEMCO COLOR VANCEVA _ Multi-family house, Gießen
SEMCO ENERGY _ Villa Libeskind, Datteln
SEMCO KLIMA 700 _ Private home, Oldenburg
SEMCO KLIMA / SEMCO KLIMASTAR _ Much more than just solar protection
Page 04
SEMCO STAR / SEMCO ENERGY _ Thermal insulation equivalent to a wall
Page 08
SEMCO SUN / SEMCO SUN REFLECT _ Creative reflections
Page 10
SEMCO PHONE _ No chance for noise
Page 12
SEMCO SAFE _ Safe is safe
Page 14
SEMCO DUR ALARM _ Securely monitored Page 16
SEMCO KLIMA LIGHT DIFFUSION _ Not for dazzlers Page 17
SEMCO STRUCTURAL GLAZING _ Facelifts for facades Page 18
SEMCO POINT _ Perfect and to the point
Page 19
Title motif: SEMCO KLIMA 400 _ CFK Research Center, Stade
03
SEMCO KLIMA 700 _ Schinkelbad swimming baths, Osnabrück
SEMCO DESIGN _ Fantasy glass design Page 20
SEMCO COLOR _ Colorful interactions on facades
Page 22
SEMCO COLOR VANCEVA _ Colorful aspects and perspectives
Page 24
SEMCO PICTURE _ Gigantic images
Page 25
FINI CURVE _ Glass with verve
Page 26
QUALITY FROM SEMCOGLAS
Page 28
QUALITY AND APPROVAL MARKS
Page 30
TECHNICAL DATA
Page 32
GLOSSARY
Page 35
KLIMA CLIMATE GLAZING
04 SEMCO KLIMA / SEMCO KLIMASTAR
More than just solar protection
The requirements set by modern architecture for large glass surfaces that are fully transparent
and neutrally coated are met by Semcoglas with their premium glazings SEMCO KLIMA and
SEMCO KLIMASTAR. These Klima climate glazing products were originally developed for use in
facades with a glass coverage of more than 50 percent in order to optimally meet the applicable
requirements for summer thermal insulation.
SEMCO KLIMA 500 _ Office building, Münster
MATCHING SEMCO COLOR FACADE
PANELS AVAILABLE [ s. P. 22 ]
SEMCO KLIMA 600 _ Central Canteen, Bersenbrück
05
SEMCO KLIMA 500 _ Timber Harbor West, Hamburg
Optimal summer
thermal insulation
Klima climate glazing
Sola
r en
Coating position
SEMCO KLIMA permits significantly less
solar energy transmittance than conventional thermal insulation glazing.
erg
y
n
ectio
Refl
Summer thermal insulation is optimally ensured with
the particularly low g values of Semco Klima glazing the light comes in, but solar energy and the corresponding
heat remains outside. Energy-intensive operation of air
conditioners during hot summer months is a thing of
the past. Our Klima climate glazing is therefore particularly suitable for facades with a glass proportion of more
than 50 percent.
In the colder seasons, the low Ug value of SEMCO
KLIMA and SEMCO KLIMASTAR provides a comfortable
room climate. Long-wave heat radiation is reflected
back into the room.
n
ectio
Refl
tion
ec
Refl
Total energy
transmittance
(g value)
A considerable proportion of the solar
energy falling on the glazing is already
reflected away by the outer pane.
The rest of the pane construction reflects
so much of the remaining energy that
just 19 to 37 percent is allowed to pass
through the panes.
Secondary heat output through absorption
SEMCO KLIMA 700, 600, 500 / OPTIMALLY SUITABLE FOR:
Private, commercial and public buildings such as schools,
office buildings, hotels, etc.
Buildings with a glazing proportion of over 50 percent
•
•
Technical data on Page 32
KLIMA CLIMATE GLAZING
06 SEMCO KLIMA / SEMCO KLIMASTAR
BE CONVINCED BY
THE COLOR NEUTRAL
TRANSPARENCY
In comparison to conventional solar
protection glazing, SEMCO KLIMA gives
you a completely clear and faultless view
of objects.
SEMCO KLIMA 400
SEMCO KLIMA 500
SEMCO KLIMA 600
SEMCO KLIMA 700 _ Community Center Schloss Ueckermünde
SEMCO KLIMA 700
SEMCO KLIMA GLAZING SCORES HERE
FOR MORE TRANSPARENCY Large glass surfaces, color neutrality and glazing uniformity, low color fluctuation,
AND LIVING COMFORT
bright rooms and optimal living and working climate
FOR THE ENVIRONMENT
FOR UV PROTECTION
FOR LESS COSTS
Reduced energy costs with no air conditioning, reduction in artificial lighting and reduced CO2 emissions
Greater UV protection for furniture, plants and wood surfaces
Lower heating costs through low Ug value of 1.0 and below
07
FOCAL POINT GLASS STRUCTURES
Light-flooded glass structures should provide a comfortable place to stay both in commercial and private buildings.
However, temperatures can develop in transitional and summer months that can make a longer presence in such places unbearable.
In addition, textiles and wood surfaces are pitilessly exposed to solar UV radiation and even plants are unprotected from burning
lens effects.
Living under glass becomes a relaxing event, even in high summer, with the climate glazing SEMCO KLIMA and SEMCO KLIMASTAR.
Our Klima climate glazing is also equipped with high UV protection so that the plants and interior decorations remain unaffected.
Interior temperature curve in a glass structure without the influence of thermal conditions (Ø monthly values)
Thermal insulation glazing
SEMCO STAR
40
35
SEMCO KLIMA 400 (roof)
SEMCO KLIMA 700 (facade)
25
Germany average
external temperature
20
15
10
Span of external
temperature
Temperature in °C
30
5
0
-5
Thermal insulation glazing SEMCO STAR
Source: Calculation results Krämer-Evers Bauphysik, Osnabrück
SEMCO KLIMA 400 (roof)
SEMCO KLIMA 700 (facade)
Germany average external temperature
Conservatory with penthouse roof, south-west alignment without thermal conditions; high air exchange rate
Glass types: SEMCO STAR (Ug=1.1; g= 62 %), SEMCO KLIMA 400 (Ug=1.0; g= 21 %) + SEMCO KLIMA 700 (Ug=1.0; g= 37 %)
SEMCO KLIMA 400 _ CFK Research Center, Stade
SEMCO KLIMA 400 / OPTIMALLY SUITABLE FOR:
Commercial and private buildings with glass structures,
conservatories, overhead glazing, atriums, etc.
•
THERMAL INSULATION GLAZING
08 SEMCO STAR / SEMCO ENERGY
Thermal insulation equivalent
to a wall
Wherever summer thermal insulation does not play a role in facades with a relatively low glass
percentage of under 50 percent, the thermal insulation glazing SEMCO STAR and SEMCO ENERGY
provide an excellent and comfortable room climate.
Both product groups meet the requirements of the Energy Savings Act. They can be used in lowenergy and passive houses as they permit a lot of energy into the building but not back out again.
Are you planning a facade with a glass percentage over 50 percent? Then SEMCO KLIMA or SEMCO
KLIMASTAR are the perfect products for you [cf. P. 04].
Ug VALUE:
THE SMALLER, THE BETTER
Heat transfer
(Ug value)
Reflection
Long-wave
heat radiation
outside
inside
The Ug value indicates how much heat in a room
is transmitted to the outside through glass with
a surface of 1 square meter and a temperature
difference of 1 Kelvin.
The EnEV 2009 requires Ug values of 1.1 W/m²K for
glass (new building reference value).
This value is undershot by SEMCO KLIMASTAR with
Ug values of up to 0.4 W/m²K, setting new yardsticks
in climate protection and energy savings.
SEMCO STAR _ Felix Nussbaum Museum, Osnabrück
This keeps the cold out
The thermal energy of solar radiation is optimally utilized and, thanks to a low Ug value, the
warmth remains in the building. Results are achieved that are comparable to the use of solid wall
building materials. Unpleasant drafts are a thing of the past as the pane surface does not radiate
the cold. So, high comfort is guaranteed, even directly next to a window.
Our triple glazing SEMCO ENERGY is also available with g values of over 60 percent.
Ask your consultant.
ALL THERMAL INSULATION GLAZING
ALSO AVAILABLE WITH THERMALLY
INSULATED PLASTIC MULLIONS!
09
SEMCO STAR _ H10 Hotel, Berlin
Coating position
Noble gas filling
Thermally separated
spacers
Outside
Inside
Pane structure SEMCO STAR (double) and SEMCO ENERGY (triple)
OPTIMALLY SUITABLE FOR:
Private and commercial buildings with punctuated
facades and low glass percentage
Buildings with a glazing proportion of less than 50 percent
Low-energy or passive building designs
•
•
•
SEMCO STAR and SEMCO COLOR _ Administration offices, Hamburg
SOLAR PROTECTION GLASS
10 SEMCO SUN / SEMCO SUN REFLECT
Creative reflections
Buildings get an unmistakably animated profile with the solar protection glazing SEMCO SUN and SEMCO SUN REFLECT. Depending on the
architectural visual requirements, the choice lies between neutral, blue, bronze, green, silver or gray reflective glass. An individually elegant,
aesthetically colored and reflective facade can be achieved through different color gradations of the tinted glazing and different reflection
strengths.
Brilliant and modern surfaces are shown by SEMCO SUN and SEMCO SUN REFLECT, for example, when used in STRUCTURAL GLAZING facades
where they can meet the requirements of modern architecture for almost completely seamless glass facades [cf. P. 19].
The facade is not just visually brilliant: The excellent
thermal insulation with a Ug value of 1.0 W/m²K also
meets the highest of requirements.
Incidentally: If you are planning a facade with a glazing
proportion exceeding 50 percent and you also want a
fully neutral view through the glass, then SEMCO KLIMA
or SEMCO KLIMASTAR are the ideal products [cf. P. 04].
SEMCO SUN 550/1 and SEMCO COLOR _ Berlin Hyp Bank, Berlin
SEMCO SUN 340/1 und SEMCO COLOR _ Mercedes-Benz Car Dealership, Oldenburg
11
SEMCO SUN 340/1 and SEMCO COLOR _ Germaniahafen, Kiel
MATCHING SEMCO COLOR
FACADE PANELS AVAILABLE [ s. P. 22 ]
Mainly commercial properties
Reflective or color-reflective facades
For use in STRUCTURAL GLAZING facades
•
•
•
SOUND INSULATION GLAZING
12 SEMCO PHONE
No chance for noise
Street noise, loud operating noise or the noise from aircraft: Noise pollution through our environment has
increased greatly in the past.
Semcoglas provides silence. The noise stays on the outside with tested sound insulation glazing. SEMCO PHONE
offers the appropriate glazing for various noise sources – whether for buildings on heavy traffic routes or in the
neighborhood of discos and airports. Semcoglas can resolve small and large noise problems with a wide range of
sound insulation glazing. Securely and effectively.
SEMCO PHONE can, of course, also be combined with the appropriate climate, thermal insulation, solar protection
and safety glass. For complete protection at all times inside a building.
13
Against the racket
While the sound insulation index Rw does not sufficiently take into account the various noise spectra in buildings caused by different sound sources,
the definition of noise insulation using the spectrum weighting values C and Ctr provides more meaningful statements. During the evaluation, data
can also be determined on how the component behaves with regards to various types of sound.
Noise situations: C
Operational noise, emitted mainly in the medium and high-frequency range (e.g. motorways, trains at
medium and high speed, low-flying jet airplanes)
Ctr
Operational noise, emitted mainly in the medium and low-frequency range (e.g. urban traffic, trains at low
speed, high-flying jet airplanes, disco music)
A selection of our sound protection glazing
and their evaluated sound insulation index
Rw (C; Ctr) can be found on Page 34.
Noise impact in dB
> 75 dB
> 70 dB
> 60 dB
Living and working areas < 30 dB
Recommended sound insulation
class for living area glazing
4-6
3-4
2-4
Sound insulation
class
Evaluated sound insulation
index R‘w of the functional
window installed in the
building; measured as per
DIN EN 10140
Required evaluated sound
insulation index R‘w,p of the
functional window installed in
the laboratory; measured as per
DIN EN 10140
1
25 to 29 dB
≥ 27 dB
2
30 to 34 dB
≥ 32 dB
3
35 to 39 dB
≥ 37 dB
4
40 to 44 dB
≥ 42 dB
5
45 to 49 dB
≥ 47 dB
6
≥ 50 dB
≥ 52 dB
Commercial or private buildings in noise-intensive
areas, such as roads with heavy traffic, near rail lines
or under flight paths
•
SAFETY GLASS
14 SEMCO SAFE
Safe is safe
The composite safety glass SEMCO SAFE provides secure protection against forms of violence thanks to the varying thicknesses of the
float or single-glazing safety glasses (SGS) and composite films which are bonded together under pressure and high temperatures.
Depending on the pane structure, the performance range of our safety glazing ranges from private protection against forced entry to
protection of persons and property with various resistance classes. Special requirements for an application, for instance in banking or
public locations with particular protection needs, can be transparently met by SEMCO SAFE.
SEMCO SAFE can also be combined with the appropriate climate, thermal insulation, solar protection and sound protection glass.
Characteristic
Resistance class of glazing as per
DIN EN 356 / DIN EN 1063
Application recommendations
Resistance class of component
as per DIN EN 1627:2011-08
Resistance class of component
as per DIN EN 1627:1999-04
RC 1 N
---- b)
RC 2 N
RC 2 c)
P2A
P3A
Manual attack
resistance
Penetration protection
P4A or no requirementa)
Single and multi-family houses
P4A or no requirementa)
P4A
Upscale residential buildings
RC 2
RC 2
P5A
Upscale buildings
RC 3
RC 3
P6B
Video, photo retailers
RC 4
RC 4
P7B
Chemists, department stores
RC 5
RC 5
P8B
Prisons, jewelers, psychiatry
RC 6
RC 6 d)
BR2 - S
BR2 - NS
Bullet resistance
BR3 - S
BR3 - NS
Personal safety
BR4 - S
BR4 - NS
Penetration/
bullet resistance
BR3 - S/P6B
BR3 - S/P7B
Banking
a) National requirements can be taken into account in these resistance classes.
b) No classification possible as test requirements have been increased.
c) The resistance class RC 2 is basically suitable for the correlation of the resistance class RC 2 N; the glazing can however be freely determined.
d) Supplementary test with the splitting hammer as per DIN EN 1630:2011-08.
15
Fall protection glazing
SEMCO SAFE offers integrated protection against cuts with the shard-binding property of the composite film and also provides
remaining structural capacity in the case of glass breakage. It is also suitable for fall protection in the correct glass applications
according to TRAV (technical rules for the use of safety glazing). These rules are issued by the German Institute for Construction
Engineering (DIBt) and taken into consideration in all Federal states by the supervising building authorities.
Semcoglas has a „General building inspection test certificate“ (AbP) for safety insulation glazing (double and triple) in the TRAV
categories A, C2 and C3.
The minimum configuration is CSG8-0.76 / PIS10 / CSG6-0.38. This can be expanded by a middle pane for triple glazing configurations.
It can be produced with safety glass or even float glass. If glazing is produced according to the AbP, then the impact resistance is
proven according to TRAV. This avoids the necessity of experimental tests or approvals in individual cases!
Numerous easy options
The individual glass panes in the composite safety glass SEMCO SAFE SENTRYGLAS® are bonded together with SentryGlas® intermediate
film layers. A wide-ranging field of applications is made possible by the resulting high stiffness.
Larger dimensions and less weight are just two of the advantages that this product offers in comparison to composite safety glass
using PVB film as an intermediate layer. SEMCO SAFE SENTRYGLAS® opens up new architectural possibilities for architects and
construction engineers.
Protection of valuable objects
Fall protection safety glazing
(e.g. balcony balustrades, railings)
Protection of and against persons
•
•
•
ALARM GLAZING
16 SEMCO DUR ALARM
Securely monitored
According to crime statistics, half of all break-ins are carried out via unsecured glazing areas.
Semcoglas sounds the alarm: Excellent protection for buildings with SEMCO DUR ALARM, whether in the private, commercial
or public sector.
Burglars simply stand no chance when buildings are equipped with safety glass and integrated alarm function. The alarm
strip is either positioned invisibly or discreetly visible - as a preventative deterrent. As soon as the glass is damaged, the alarm
is triggered. SEMCO DUR ALARM reacts within seconds – driving the burglars away.
SEMCO DUR ALARM with discreetly positioned
alarm strip (top) and completely hidden alarm
strip (bottom)
SEMCO DUR ALARM and SEMCO KLIMA 700 _ C & A premises, Osnabrück
Semcoglas offers safety with quality, which pays in emergency situations: SEMCO DUR ALARM meets all legal VdS and
DIN specifications for burglar alarm systems Class C. You are also on the safe side with SEMCO DUR ALARM with regards
to damage regulation in insurance cases.
The system can be combined with all commercial alarm systems and other functions such as thermal insulation, solar
protection, sound protection and climate glazing.
Protecting commercial and private properties from
break-in
Shop windows
•
•
PRIVACY PROTECTION GLASS
SEMCO KLIMA LIGHT DIFFUSION
Not for dazzlers
SEMCO KLIMA LIGHT DIFFUSION (LD) brings light into industrial buildings and sports halls: The light diffusing characteristic of the glass
prevents direct dazzling and also guarantees visual protection. It also meets the requirements for listed buildings and has been tested as
ball-impact resistant for use in sports halls.
In comparison to conventional hall glazing systems, the thermal insulation is significantly higher with Ug values of up to 1.0 W/m²K (double
glazing) and 0.5 W/m²K (triple glazing). SEMCO KLIMA LD also keeps the heat out in summer, thus providing comfortable temperatures.
A glass full of good properties.
SEMCO KLIMA LD _ Sports hall, Wesenberg
Halls for commercial or public use and visual
protection requirements
Sports halls
Listed buildings
•
•
•
17
FULLY GLAZED FACADES
18 SEMCO STRUCTURAL GLAZING
SEMCO STRUCTURAL GLAZING and FINI CURVE _ Abford House, London
Glazing options with STRUCTURAL GLAZING
Facelifts for facades
Crystal clear aesthetics across the board offered by SEMCO
STRUCTURAL GLAZING. Is it new or old? The viewer can only
guess where windows are placed with functional glazing and
where wall elements are used with SEMCO COLOR.
‚STRUCTURAL GLAZING‘ was developed over 25 years ago in the
USA. With its filigree, flush-mounted appearance, this structural
configuration is preferentially used in representative entrances,
stairwells and facades of office buildings. In addition, the lack of
transverse and longitudinal profiles means that such facades are
extremely easy to clean.
Flush-mounted dry glazing in
horizontal section
Flush-mounted dry glazing
in vertical section
Wet sealing in horizontal
section
U-shaped dry glazing in
vertical section
All Semcoglas functional glazing can be combined with a
matching facade panel so that we, as a certified STRUCTURAL
GLAZING partner, can guarantee a facelift that can show its face
anywhere.
Visually frameless glass facades
Facade cladding
•
•
MATCHING SEMCO COLOR
FACADE PANELS AVAILABLE [ s. P. 22 ]
POINT-FIXED GLAZING
SEMCO POINT
19
Perfect and to the point
Floating facades and transparent lightness of design:
The advantages of clear glass facades are clearly pointed out with SEMCO
POINT. Thanks to this excellent system, large surface areas can be realized
without frames. The fittings are flush-integrated in the panes with countersunk
holes or combined with disc holders through cylindrical glass bores. The
main point here is that: The point-fixed system is equipped with an articulated
holder whose rotation point lies within the glass plane.
SEMCO POINT is so simply relaxed: Forces that occur are directly diverted
into the sub-structure. The intrinsic weight of the glass pane does not
therefore cause any additional stresses in the holding area. The thickness
of the glass can be reduced to a minimum. SEMCO POINT makes brilliant
facade design possible through perfect technology.
We also even offer a system with optimal grip for canopy systems and full
glazing systems such as glazed passages, waiting rooms or public transport
stops.
SEMCO POINT _ Cruise Center, Warnemünde (top/bottom)
SEMCO POINT _ Municipal museum, Demmin
Large area glazing, overhead glazing
Canopy systems
Fully glazed systems such as e.g. glazed passages,
waiting rooms and public transport stops
•
•
•
Disc holder
Countersunk holder
SCREEN PRINTING
20 SEMCO DESIGN
Fantasy glass design
Glass surfaces take on clearly unique appearances with SEMCO DESIGN.
Graphic patterns, company logos or text - we ensure that your individual taste is reflected on
the surface of the glass.
SEMCO DESIGN is just as suitable for the design of facades, balustrades, canopies and roofing
as it is for public transport stops, porches or signs.
The process is perfectly easy: The design is applied with ceramic colors to the glass using
screen printing and burnt on during the tempering process. The product is water and scratchresistant, ensuring long durability. There are no limits to the choice of color. The entire color
spectrum is available, based on the RAL, RAL Design, NCS, Pantone and Sikkens systems. The
tempered SEMCO DESIGN is always subject to a Heat-Soak test (SGS-H), if used in facades, to
minimize the risk of spontaneous breakage due to nickel-sulfide inclusions.
SEMCO DESIGN _ Car park, Rostock (top/right)
21
SEMCO DESIGN and SEMCO KLIMA 600 _ Cruise Center Altona, Hamburg (top/bottom)
SEMCO DESIGN _ Logo design on office building
YOU CAN FIND NUMEROUS POPULAR DESIGN
TEMPLATES IN OUR PATTERN BOOK
Custom patterns are displayed perfectly on clear or colored float
glass and white glass.
SEMCO DESIGN can be combined as a mono or insulation glass
with our climate, thermal insulation and sound insulation glazing
and with safety functions. Fantastic glazing with extra functionality
- for extra safety and comfort.
Color designs with transparency
Depiction of Corporate Design elements such as e.g.
company logos
Signs, orientation systems
Visual protection
•
•
•
•
FACADE PANELS
22 SEMCO COLOR
SEMCO COLOR _ Marienkrankenhaus hospital, Hamburg
SEMCO COLOR _ River police headquarters, Rostock
Colorful interactions on
facades
Fantastic effects can be achieved with colors. Facades shine in unique animated
appearances with SEMCO COLOR. A broad color range can be selected for the
facade panels, depending on the architectural requirements, colors that are of
course available for all our glass types. The colors can also be optimally matched
to other materials using the RAL, RAL Design, NCS, Pantone and Sikkens systems.
The advantages of SEMCO COLOR can be seen: The facades are eye-catching
with permanently burnt-in special colors on the outside, but opaque to the
interior. SEMCO COLOR on white glass has a particular brilliance.
The mixture does it with SEMCO COLOR. The use of special glass types results in
both unusual mixed color effects and homogenous glass facades in combination
with SEMCO SUN or SEMCO SUN REFLECT [cf. P. 10].
The tempered Semcoglas single glazing safety glass meets all relevant construction
approval requirements. We only use enamel colors free from heavy metals in
our standard color range, in accordance with our concept of ecologicallycompatible construction materials.
SEMCO COLOR is always subject to a Heat-Soak test (SGS-H), if used in facades,
to minimize the risk of spontaneous breakage due to nickel-sulfide inclusions.
Application examples for connecting panels
outside
inside
outside
Mineral insulation material
Rock wool WLG 035
AL plate with Z-edging
Color as required
SGS facade panel, RAL
or NCS with HS test
Glass-aluminum composite panel
with Z-edging for wall and balustrade
cladding with good thermal and sound
insulation properties
inside
outside
inside
outside
AL plate
Color as required
AL plate
Color as required
Vacuum insulation
inside
23
PIS filled with noble gas
SGS facade panel, RAL or
NCS with HS test
PUR rigid foam
WLG 035
or NCS with HS test
or NCS with HS test
Glass sandwich panel is a thermal
insulation panel with low mounting
depth for use in the facade sector
SGS with thermal insulation
Vacuum insulation panel with low
Glass-glass panel with insulation glazing
mounting depth for use in facade sectors appearance and excellent depth effect for
that do not permit use of conventional post-beam construction in an all-glass look
canted panels
THE COMPREHENSIVE COLOR
RANGE CAN BE FOUND IN OUR
COLOR CATALOGS
SEMCO COLOR and SEMCO COLOR VANCEVA _ Employment Agency, Berlin
SEMCO COLOR _ UTA Headquarters, Aschaffenburg
Creative color solutions
Homogeneous glass facades in combination with other
functional glazing in our product range
•
•
COLOR FILMS
24 SEMCO COLOR VANCEVA
Over a thousand color nuances
available at the click of a button
Colorful aspects and perspectives
SEMCO COLOR VANCEVA brings color into our lives: Blue glass roofs make the viewer think of a permanently
blue sky, green tinted windows turn the vision of a green paradise behind glass into reality. SEMCO COLOR
VANCEVA creates harmony in color and design.
Wonderful perspectives are possible thanks to the novel color film generation. Over a thousand design variants
can thus be realized on high-quality composite safety glass (CSG), up to 2440 x 4500mm. The palette ranges
from standard colors to personally created tones. Various levels of light permeability can also be achieved with
three different white films.
SEMCO COLOR VANCEVA makes exciting architecture worth looking at – also with regards to facade designs
using company colors. If your clients love extravagant glass design, then this is the product for them.
SEMCO COLOR VANCEVA _
Wandsbek Market, Hamburg
SEMCO COLOR VANCEVA _ Shopping Center, Greifswald
SEMCO COLOR VANCEVA _ Campus, Marburg
Partially transparent glazing with color effects, e.g.
balconies, railings, etc.
Transparent building design in company colors
•
•
SEMCO COLOR VANCEVA _ Einkaufszentrum, Greifswald
MOTIF FACADES
SEMCO PICTURE
25
Gigantic images
Facades are displayed in an entirely new light with customized images.
Creativeness without limit. With the free selection of images, SEMCO
PICTURE is extremely versatile and fascinating in topic-based architecture
with individually designed glass surfaces.
The glass surfaces can be displayed transparently or opaque with the
selected image according to the application area. SEMCO PICTURE is also
exemplary when it comes to production: The absolutely UV-resistant PVB
film holding the image is protected by being laminated within the pane
structure of the composite safety glazing.
SEMCO PICTURE _ Office building
SEMCO PICTURE _ Office building
Creative decorative elements on glass
Company photos / Illustrations within the framework
of Corporate Design
•
•
CURVED FACADE GLAZING
26 FINI CURVE
Glass with verve
Glazing goes round the bend with FINI CURVE: Curves shapes set
new trends in facade design. Cylindrical, spherical or conical curves the object in question will have an unusual and amazing aspect.
Through the innovative engineering of FINI CURVE, special shapes
can be realized with verve. The facade will become an aesthetic
eye-catcher in interaction with colored glazing.
We can, of course, also shape solar protection and thermal insulation
glazing.
FINI CURVE _ Lehrter Railway Station, Berlin
Flexible glazing
SGS
CSG
Insulating
glazing
Clear float glass
ü
ü
ü
Extra-white glass
ü
ü
ü
Satin-finished glass
ü
ü
ü
Colored glass
ü
ü
ü
Anti-reflective glass
ü
ü
ü
Screen-printed glass
ü
ü
ü
Ornamental glass
-
ü
ü
Solar protection glass
ü
ü
ü
ü
ü
ü
Bending capacity
FINI CURVE _ Ramada Hotel, Berlin
27
FINI CURVE FLOAT AND FINI CURVE CSG HAVE
THE FIRST GENERAL CONSTRUCTION APPROVAL
FOR CURVED GLASS (Z-70.4-146)
FINI CURVE _ Abford House, London
Principles of dimension terminology
Outer chord S
Inner chord
Pane height H
Be n d i n g a n g l e
ess
ter
rad
i
Ou
Pane height outside Sh
us
s
Gla
Bending axis
ckn
hi
st
Inner
e (c
c ur v
e
curv
Outer
Outer girth L
on
(c
v
ca
)
ide
es
ex
onv
e)
si d
FINI CURVE _ Rabobank, Utrecht
Curved facades
Balustrades
Circular structure glazing
•
Further information on curved glazing can be found
under www.finiglas.de
•
•
28 QUALITY FROM SEMCOGLAS
FLOAT GLASS
The production of float glass in our float glass plant in
Osterweddingen is a long, constant, never-ending flow.
Only the highest of precision throughout the entire production
line can guarantee the high quality of our float glass. Our
plant can be rightly said to be one of the most modern glassworks in the world.
COATING
Coatings, e.g. with silver and metal dioxide, can specifically
influence the properties of glass. These materials have a high
transmissivity in the visible spectral range and a high
reflectivity in the infrared range. In addition, metal oxides
with a high refractive index are applied for antireflection.
29
BLANK
The material glass requires a lot of know-how, secure handling
and state of the art technology. Our experienced specialists
ensure perfect results are achieved for blanks, rounded and
canted edges, cut-outs and model panes with the use of state
of the art CNC technology. A comprehensive stock of float and
cast glass, together with design and special glazing, ensures
rapid processing of orders.
We can meet diverse requirements with precisely dimensioned
blanks and process these into high-quality glass products.
SPACER
Hollow profiles made of aluminum, stainless steel, plastic or TPS
(Thermo Plastic Spacer) are used as spacers.
The two panes in insulation glazing can be held at the required
distance in this manner.
Desiccant is stored in the metal spacers. TPS in contrast does not
need additional desiccant; such a warm edge system enables a
more uniform temperature distribution over the glass surface and
ensures that energy losses are minimized along the edge areas of
insulation glazing.
SEALING
In the last step, the individual glass panes joined by a spacer
are initially sealed circumferentially with Butyl (primary seal).
The term Butyl stands for a specific butyl rubber recipe that is
produced through the polymerization of polyisobutyls (PIB).
Following this butyling, the insulation glazing panes are sealed
(secondary sealing) with a sealant, generally based on polyurethane or polysulfide. Some of the main properties of Butyl
are the very high gas and water vapor impermeability, while
the sealing material is primarily used to secure the stability of
the insulation glazing pane and hold the Butyl cord in place, in
addition to its sealing function. The standard edge connector
height is approx. 11 mm.
30 QUALITY AND APPROVAL MARKS
The careful selection of high quality preliminary products, the use of environmentally-friendly materials and modern technology, the
constant qualification of the employees and systematic in-house and third-party monitoring from production to delivery all ensure
uniform quality of Semcoglas functional glazing for windows and facades.
High quality standards are a prerequisite for high customer satisfaction! The following quality and approval marks are evidence of
Semcoglas quality:
CE certification
Semcoglas verifies conformity of its produced multi-pane insulation glazing and safety glazing with the requirements of
the European product standards. The respective initial type tests required for this purpose and the compulsory factory
production control (FPC) are implemented in all production factories. In order to guarantee our customers a high quality
standard over and above this, the FPC and the relevant standard product tests in the individual insulating and safety
glazing works are subject to voluntary third-party monitoring by an independent test authority approved at European
level, for example:
Information about the CE marking of our standard products can be found on the Internet under www.semcoglas.com/ce.
All relevant performance features are listed there in tabular form, sorted according to the respective product. We can
draw up a CE declaration of conformity for you on request for special insulation glazing and safety glass configurations.
Ü mark (German mark of conformity) - legal requirement
Semcoglas declares with this mark that its products also conform to the legal national requirements for insulation and
safety glazing, in addition to the CE mark.
31
DIN EN ISO 9001 – Systematic quality
This mark documents that Semcoglas is monitored according to the guidelines of the quality management system set out in ISO
9001:2008. A continuous improvement process (CIP) is implemented on this basis, with the aim of optimizing working sequences
in all operational divisions and maintaining uniformly high quality of products.
RAL - a valued quality mark
The RAL quality mark identifies those products and services that are produced according to high specified quality criteria. The
quality and approval specifications of the Gütegemeinschaft Mehrscheiben-Isolierglas (GMI - Association for thermal insulation
glass producers) are met by Semcoglas. These include primarily a tolerance for the Ug value ≤ 0.1 W/m²K and the emissivity of the
coatings of ≤ 0.01. In addition, independent third-party monitoring of production is implemented.
„No RAL-tested window without RAL-tested insulation glazing!“
KOMO – certified quality on site
The KOMO mark is a guarantee for an above-average insulation glazing standard in the Netherlands. The latest quality requirements
of the Dutch foundation „Building quality“ and legal specifications are thereby met. They include regular product testing and
third-party monitoring by the KIWA Product Cert GmbH.
DS - Certificeret
Semcoglas is certified and monitored in compliance with the Danish Standard (DS) with this approval mark. Product tests are
implemented and ongoing production monitored by an external body.
SP - Sveriges Provnings- och Forskningsinstitut
The P mark signals Scandinavian customers that Semcoglas is also subject to constant monitoring within the framework of the
SP certification. This includes strict product tests and third-party monitoring by the Swedish testing and research institute (SP).
Benor - Certificat
Semcoglas is certified with this approval mark in compliance with the Belgian standard requirements by the BCCA (Belgian
Construction Certification Association). Product tests and two third-party monitoring production inspections per year are
implemented.
VdS - certificate
Glazing with alarm systems and the relevant production factories are certified and monitored by the VdS Schadenverhütung GmbH. The
corresponding requirements regarding production of the alarmed glazing - whether insulation or safety glazing - are met here by Semcoglas.
DIN EN 410
W/m²K
%
%
%
%
b factor
(shading coefficient)
DIN EN 673
(ΔT=15K)
Color reproduction index Ra
Weight
kg/m2
g value
Light reflection
outside (D65) rv
mm
Ug-value
Light transmissivity (D65) tv
mm
Glass structure
outside/PIS/inside
(outside/PIS/center/PIS/
inside)
Gas type
Glass product
Glass thickness
32 SPECIFICATIONS
Klima climate glazing
Semco Klima 400
26
6*/16/4
Ar
25
1,0
21
40
25
91
0,26
Semco Klima 400
28
8*/16/4
Ar
30
1,0
21
40
25
90
0,26
Semco Klima 400
30
8*/16/6
Ar
35
1,0
21
39
25
90
0,26
Semco Klimastar 400
38
6*/12/4/12/*4
Ar
35
0,7
19
35
26
90
0,24
Semco Klimastar 400
42
6*/14/4/14/*4
Ar
35
0,6
19
35
26
90
0,24
Semco Klimastar 400 Kr
38
6*/12/4/12/*4
Kr
35
0,5
19
35
26
90
0,24
Standard recommendation color-matched Semco COLOR facade panel: Type SC 8372 E
Semco Klima 500
26
6*/16/4
Ar
25
1,0
26
51
19
91
0,33
Semco Klima 500
28
8*/16/4
Ar
30
1,0
26
50
19
90
0,33
Semco Klima 500
30
8*/16/6
Ar
35
1,0
26
50
19
90
0,33
Semco Klimastar 500
38
6*/12/4/12/*4
Ar
35
0,7
24
45
20
90
0,30
Semco Klimastar 500
42
6*/14/4/14/*4
Ar
35
0,6
24
45
20
90
0,30
38
6*/12/4/12/*4
Kr
35
0,5
24
45
20
90
0,30
Semco Klima 600
26
6*/16/4
Ar
25
1,0
32
64
18
93
0,40
Semco Klima 600
28
8*/16/4
Ar
30
1,0
32
63
18
92
0,40
Semco Klima 600
30
8*/16/6
Ar
35
1,0
32
63
18
92
0,40
Semco Klimastar 600
38
6*/12/4/12/*4
Ar
35
0,7
29
56
20
92
0,36
Semco Klimastar 600
42
6*/14/4/14/*4
Ar
35
0,6
29
56
20
92
0,36
38
6*/12/4/12/*4
Kr
35
0,5
29
56
20
92
0,36
Semco Klima 700
26
6*/16/4
Ar
25
1,0
37
68
13
96
0,46
Semco Klima 700
28
8*/16/4
Ar
30
1,0
37
67
13
96
0,46
Semco Klima 700
30
8*/16/6
Ar
35
1,0
37
67
13
95
0,46
Semco Klimastar 700
38
6*/12/4/12/*4
Ar
35
0,7
34
60
16
95
0,43
Semco Klimastar 700
42
6*/14/4/14/*4
Ar
35
0,6
34
60
16
95
0,43
38
6*/12/4/12/*4
Kr
35
0,5
34
60
16
95
0,43
Semco Star
24
4/16/*4
Ar
20
1,1
63
79
13
98
0,79
Semco Star Kr
16
4/8/*4
Kr
20
1,2
63
79
13
98
0,79
Semco Star Kr
18
4/10/*4
Kr
20
1,0
63
79
13
98
0,79
Semco Star Kr
20
4/12/*4
Kr
20
1,1
63
79
13
98
0,79
Semco Energy
28
4*/8/4/8/*4
Ar
30
1,0
50
70
17
97
0,63
Semco Energy
32
4*/10/4/10/*4
Ar
30
0,8
50
70
17
97
0,63
Semco Energy
36
4*/12/4/12/*4
Ar
30
0,7
50
70
17
97
0,63
Semco Energy
36
4/12/*4/12/*4
Ar
30
0,7
53
70
16
97
0,66
Semco Energy
40
4*/14/4/14/*4
Ar
30
0,6
50
70
17
97
0,63
Semco Energy
44
4*/16/4/16/*4
Ar
30
0,6
50
70
17
97
0,63
Semco Energy Kr
24
4*/6/4/6/*4
Kr
30
0,8
50
70
17
97
0,63
Semco Energy Kr
28
4*/8/4/8/*4
Kr
30
0,7
50
70
17
97
0,63
Semco Energy Kr
32
4*/10/4/10/*4
Kr
30
0,6
50
70
17
97
0,63
Semco Energy Kr
36
4*/12/4/12/*4
Kr
30
0,5
50
70
17
97
0,63
Semco Energy Kr
36
4/12/*4/12/*4
Kr
30
0,5
53
70
16
97
0,66
Semco Star+
24
4/16/*4
Ar
20
1,0
53
70
19
97
0,66
Semco Star+
16
4/8/*4
Kr
20
1,1
53
70
19
97
0,66
Semco Star+/A Kr
18
4/10/*4
Kr
20
0,9
53
70
19
97
0,66
Semco Star+/A Kr
20
4/12/*4
Kr
20
0,9
53
70
19
97
0,66
Semco Energy+
28
4*/8/4/8/*4
Ar
30
0,9
37
56
26
95
0,46
Semco Energy+
32
4*/10/4/10/*4
Ar
30
0,8
37
56
26
95
0,46
DIN EN 410
W/m²K
%
%
%
%
b factor
DIN EN 673
(ΔT=15K)
Weight
kg/m2
g value
Light reflection
outside (D65) rv
mm
Ug-value
mm
Glass structure
outside/PIS/inside
inside)
Gas type
Glass product
Glass thickness
33
Semco Energy+
36
4*/12/4/12/*4
Ar
30
0,7
37
56
26
95
0,46
Semco Energy+
36
4/12/*4/12/*4
Ar
30
0,7
41
56
26
94
0,51
Semco Energy+
40
4*/14/4/14/*4
Ar
30
0,6
37
56
26
95
0,46
Semco Energy+
44
4*/16/4/16/*4
Ar
30
0,5
37
56
26
95
0,46
Semco Energy+ Kr
24
4*/6/4/6/*4
Kr
30
0,8
37
56
26
95
0,46
Semco Energy+ Kr
28
4*/8/4/8/*4
Kr
30
0,6
37
56
26
95
0,46
Semco Energy+ Kr
32
4*/10/4/10/*4
Kr
30
0,5
37
56
26
95
0,46
Semco Energy+ Kr
36
4*/12/4/12/*4
Kr
30
0,4
37
56
26
95
0,46
Semco Energy+ Kr
36
4/12/*4/12/*4
Kr
30
0,4
41
56
26
94
0,51
Semco Energy 73/62
36
4*/12/4/12/*4
Ar
30
0,8
62
73
18
97
0,78
Semco Energy 73/62
40
4*/14/4/14/*4
Ar
30
0,7
62
73
18
97
0,78
Semco Energy 73/62
44
4*/16/4/16/*4
Ar
30
0,7
62
73
18
97
0,78
Semco Energy 73/62 Kr
36
4*/12/4/12/*4
Kr
30
0,6
62
73
18
97
0,78
26
*6/16/*4
Ar
25
1,0
22
23
35
93
0,28
25
1,0
23
24
13
94
0,29
25
1,0
23
31
38
85
0,29
25
1,0
24
32
20
85
0,30
25
1,0
28
31
36
91
0,35
25
1,0
29
32
31
91
0,36
25
1,0
24
40
39
91
0,30
25
1,0
25
40
28
91
0,31
25
1,0
40
50
42
95
0,50
25
1,0
40
50
41
95
0,50
25
1,0
29
34
8
95
0,36
25
1,0
32
39
9
92
0,40
25
1,0
37
60
16
90
0,46
Solar protection glass
Semco Sun+ 270/1 silver-gray
Standard recommendation color-matched Semco COLOR facade panel: Type SC 8393 E or SC 8247 E
Semco Sun+ 270/2 steel-gray
26
ESG-H6*/16/*4
Ar
Semco Sun+ 340/1 silver-blue
26
*6/16/*4
Ar
Semco Sun+ 340/2 steel-blue
26
ESG-H6*/16/*4
Ar
Semco Sun+ 350/1 silver-amber
26
*6/16/*4
Ar
Semco Sun+ 350/2 steel-amber
26
6*/16/*4
Ar
Semco Sun+ 450/1 silver-green
26
*6/16/*4
Ar
Semco Sun+ 450/2 steel-green
26
ESG-H6*/16/*4
Ar
Semco Sun+ 550/1 silver-light
26
*6/16/*4
Ar
Semco Sun+ 550/2 steel-silver
26
6*/16/*4
Ar
Semco Sun+ 330 gray
26
ESG6/16/*4
Ar
Semco Sun+ 400 bronze
26
ESG6/16/*4
Ar
Semco Sun+ 600 green
26
ESG6/16/*4
Ar
with cleaning-supported effect:
Semco Dur Clean Star+
26
*ESG6/16/*4
Ar
25
1,0
43
56
35
97
0,54
30
*ESG6/16/*VSG8-0,76
Ar
35
1,0
43
55
36
97
0,54
32
*ESG8/16/*VSG8-0,76
Ar
40
1,0
42
54
36
96
0,53
Semco Clean Classico Star+
26
*ESG6/16/*4
Ar
25
1,0
30
48
33
92
0,38
30
*ESG6/16/*VSG8-0,76
Ar
35
1,0
30
47
33
91
0,38
32
*ESG8/16/*VSG8-0,76
Ar
40
1,0
26
44
33
88
0,33
DIN EN
W/m²K
%
%
%
%
Weight
kg/m2
410
b factor
DIN EN 673
(ΔT=15K)
g value
Light reflection
outside (D65) rv
mm
Ug-value
mm
Glass structure
outside/PIS/inside
inside)
Gas type
Glass product
Glass thickness
34 SPECIFICATIONS
Evaluated sound
insulation value
Rw (C;Ctr)
dB
Sound protection and thermal insulation glazing
Semco Phone 37/8 S (monolithic)
8
VSG8-0,76SC
-
21
-
-
-
-
-
-
37 (-1;-4)
10
VSG10-0,5SI
-
26
-
-
-
-
-
-
39 (-1;-3)
12
VSG12-0,5SI
-
31
-
-
-
-
-
-
40 (-1;-2)
16
VSG16-0,5SI
-
40
-
-
-
-
-
-
42 (-1;-2)
Semco Phone 32/24 Star
24
4/16/*4
Ar
20
1,1
63
79
13
98
0,79
32
26
6/16/*4
Ar
25
1,1
61
79
13
98
0,76
36 (-1;-5)
28
8/16/*4
Ar
30
1,1
60
78
12
97
0,75
37 (-2;-6)
28
VSG8-0,76/16/*4
Ar
30
1,1
57
77
13
97
0,71
38 (-2;-6)
30
8/16/*6
Ar
35
1,1
60
78
12
97
0,75
38 (-2;-6)
32
10/16/*6
Ar
40
1,1
59
77
12
96
0,74
39 (-2;-4)
32
VSG8-0,38/16/*VSG8-0,38
Ar
40
1,1
57
77
13
96
0,71
39
28
VSG6-0,5SI/16/*6
Ar
31
1,1
57
78
12
97
0,71
39 (-1;-5)
30
VSG8-0,76/16/*6
Ar
35
1,1
57
77
13
97
0,71
40
34
10/20/*4
Ar
35
1,2
59
78
12
97
0,74
40 (-2;-6)
36
10/20/*6
Ar
40
1,2
59
77
12
96
0,74
41 (-2;-5)
30
VSG6-0,5SI/16/*8
Ar
35
1,1
57
77
12
97
0,71
41 (-2;-6)
30
VSG8-0,5SI/16/*6
Ar
36
1,1
56
77
12
97
0,70
41 (-2;-7)
32
VSG8-0,5SI/16/*8
Ar
41
1,1
56
77
12
96
0,70
42 (-2;-6)
34
VSG10-0,5SI/16/*8
Ar
46
1,1
55
76
12
96
0,69
43 (-2;-6)
34
VSG8-0,5SI/16/*10
Ar
46
1,1
56
76
12
96
0,70
45 (-2;-6)
32
VSG12-0,5SI/12/*VSG8-0,5SI
Ar
51
1,3
54
75
12
95
0,68
47 (-2;-6)
36
VSG12-0,5SI/16/*VSG8-0,5SI
Ar
51
1,1
54
75
12
95
0,68
49 (-3;-8)
40
VSG12-0,5SI/20/*VSG8-0,5SI
Ar
51
1,2
54
75
12
95
0,68
50 (-3;-8)
Semco Phone 32/36 Energy
36
4*/12/4/12/*4
Ar
30
0,7
50
70
17
97
0,63
32 (-1;-5)
38
6*/12/4/12/*4
Ar
35
0,7
49
69
16
96
0,61
37 (-2;-6)
42
8*/12/4/12/*6
Ar
45
0,7
48
68
16
96
0,60
39 (-2;-5)
44
10*/12/4/12/*6
Ar
50
0,7
47
68
16
95
0,59
41 (-2;-4)
42
VSG8-0,5SI*/12/4/12/*6
Ar
45
0,7
45
68
16
96
0,56
43 (-2;-6)
44
VSG8-0,5SI*/12/4/12/*8
Ar
50
0,7
45
67
16
95
0,56
45 (-2;-6)
48
VSG10-0,5SI*/12/6/12/*VSG8-0,5SI Ar
60
0,7
44
66
16
94
0,55
46 (-1;-7)
-
Manual attack resistant thermal insulation glazing
Impact-resistant glazing
Semco Safe P2A Star (RC1)1
28
VSG8-0,76/16/*4
Ar
31
1,1
57
77
13
97
0,71
29
VSG8-1,52/16/*4
Ar
32
1,1
57
78
13
97
0,71
-
33
VSG10/16/*6
Ar
38
1,1
56
78
13
97
0,70
-
23
VSG8-1,52/10/*4
Kr
30
1,0
57
78
13
97
0,71
-
Semco Safe P6B Star (RC4)1
40
VSG18/16/*6
Ar
57
1,1
51
73
15
94
0,64
-
49
VSG27/16/*6
Ar
64
1,1
46
70
16
92
0,58
-
54
VSG32/16/*6
Ar
75
1,1
44
68
16
91
0,55
-
Penetration-resistant glazing
Data in brackets: Corresponding resistance class as per DIN EN 1627, Issue August 2011
Bullet-resistant glazing (monolithic)
1)
2)
Semco Safe BR3-S P6B/28 (bank glazing)²
VSG28
-
68
-
-
-
-
-
-
-
Semco Safe BR3-S P7B/38 (bank glazing)²
VSG38
-
90
-
-
-
-
-
-
-
Resistance class as per DIN EN 356, data in brackets: Minimum resistance class for glazing as per DIN EN 1627, Issue Sept. 2011, Table 1
Resistance class as per DIN EN 1063 and DIN EN 356
GLOSSARY
Ug value
g value
35
Unit of measurement for heat loss of glazing. The smaller the Ug value, the better the thermal insulation.
Ug values determined for vertical installation as per DIN EN 673. For physical reasons, the Ug value of insulation glazing
increases dependent on inclination angle when installed at an angle.
Unit of measurement for total energy transmittance through glazing.
High g value: Additional and free thermal use of sunshine.
Low g value: Reduction of summer heating of rooms due to sunshine.
Light transmission
Degree of light transmittance in percent. Indicates the percentage of visible light (for the radiation band between 380 nm
and 780 nm) that can pass through the glass and is therefore dependent on the glass thickness and coatings.
The higher the light transmission, the greater the daylight utilization.
Degree of light reflection
Ra value
The percentage of visible light (for the radiation range from 380 nm to 780 nm) that is mirrored or reflected on the glass
pane surface. A high degree of light reflection means a reduction of glare inside the room.
The general color reproduction index Ra describes the color impression that the human eye has when viewing an object
illuminated by daylight coming through glazing. With clear glass, Ra is 99%.
Shading coefficient (b-factor)
Rw value
Facade panels
Average transparency factor of solar energy, based on the total energy transmittance of a double glazing insulation glass,
used to calculate the cooling load of glazed rooms.
Shading coefficient (b factor) = g value / 0.80 (VDI 2078)
Value for the sound insulation. The higher the sound insulation value, the better the sound insulation.
In addition to the sound insulation value, the frequency of the sound source is taken into account with correction factors
(C; C (C; Ctr) for good noise insulation.
Facade panels made of enamelled glass matched in color to the glazing. As color impressions are subjectively evaluated,
sampling is recommended before specifying the glazing. The facade panels are mainly used to cover blank sections on
buildings, e.g. ceilings.
Glass thickness measurement
The person ordering our products is responsible for ensuring the correct measurement of glass thickness, depending on the
application, according to the applicable technical regulations and standards.
•
Combinations with different glass thicknesses are possible.
•
Dimensional tolerances, see DIN EN 572-8
•
Tolerance for the emissivity of the coatings: + 0.01 (as per RAL quality criteria)
•
Tolerance for the Ug value: + 0.1 W/m²K (as per RAL quality criteria)
•
Tolerance for the g value: ± 0.02 (as per RAL quality criteria)
•
The functional values given here for the glass products were determined with calculation software validated and
certified by ift Rosenheim (Test Report No. 41041462). The data for the software was based on functional values on
standard structures determined according to the relevant and currently valid test standards by correspondingly
accredited test institutes. Formats and combinations deviating from this can lead to a change in individual functional
values.
•
The light and radiation-related physical data are calculated or measured values that may fluctuate by ± 2 or 3%
depending on the glass manufacturer and the glass thickness, as well as unavoidable production tolerances. The
data shown here are therefore subject to change.
With more than 20 sites in three regions across the nation, Semcoglas is one of the leading complete suppliers for architectural glass.
The Service centers in the individual regions are closely networked with our application engineering and product development sites.
So we can achieve the optimum solution for every challenge together with you. That‘s a promise.
www.semcoglas.com
1/2012
Your SEMCOGLAS Partner

Facade - Semco

Transcription

Similar documents

BEACHDOWN, CHALLABOROUGH, DEVON

Safety glass.

LIGHTWEIGHT WINDOWS | LETTE VINDUER

GT Securi-Clip - GT Window Products LTD

Semco products proudly distributed by Synergy

Untitled

PDF, 2.84MB - Kindervelt

Where Smart Solutions Take Flight ™ Semco ® Packaging