m o d e r n.u r b a n. m o bile. Info: Alfine with

Chainring thickness: up to 3.0 mm
Max. chain width: 9.0 mm
Observe the stipulated chain tension
and chainline
For 45 teeth
For 39 teeth
The 39 chainring has to
be replaced including
the crank for a different crankset with a
38 chainring. The pitch
circle of the 39 chainring is not usually
compatible with the 38
chainring.
The 45 chainring has
to be replaced by
a 44 chainring. The
crankset can still be
used.
The angled Alfine cog must be
replaced with a straight cog from
e.g. SRAM (www.sram.com) or ESJOT
(www.esjot.com).
May 2012
Please note: Does not apply to
Nexus. When using Nexus you have
to mount the angled cog with cog
facing outward.
If there is a chainguard on the hub then
this must be removed.
modern.urban. mobile.
with
Alfine 11 (SG-S700)
Alfine 8 (SG-S501)
Please use the XL versions of chainglider
from a centre distance of 480 mm
Info: Alfine with
More info:
The chainglider is also an ideal addition for the Shimano Alfine hub
gear. However, this may require some modification work depending on
the Alfine version, as described above.
Hebie GmbH & Co. KG
Sandhagen 16
33617 Bielefeld
Germany
Please also follow the general fitting instructions for the chainglider
in the appropriate manuals and flyers to ensure it works properly.
Tel +49 (0)521 914 1912
[email protected]