docGuide - Package Development Co., Inc.
download 
Report Transcription
Guide - Package Development Co., Inc.
REVISIONS REV. DATE DESCRIPTION APPROVED Package Development Company "Thermoformed Packaging 101" Digital Reference Guide Blisters Clamshells Mock Clamshells RF Packaging Trays Tri-folds If you have any questions about the Thermoforming package lines illustrated in this reference guide or any others please feel free to contact us. Contact Information. www.pkgdev.com [email protected] (973)983-8500 Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. Auto Feed Blister DATE DESCRIPTION APPROVED Non-Auto Feed Blister Auto & Non-Auto Feed Blisters Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. DATE DESCRIPTION APPROVED Auto & Non-Auto Feed Blisters continued. Non-Auto Feed Blister Auto Feed Blister 10.00° Required Any Taper less then 10 will not feed. Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. DATE DESCRIPTION APPROVED Trapped Blister Large Flange Required Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. DATE DESCRIPTION APPROVED Mock Clamshell with Standing Feet Mock Clamshell with Delta Hang Hole Mock Clamshells Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. Mock Clamshells continued. DATE DESCRIPTION APPROVED Printed Card Heat Seal Area Mock Clamshell with Feet Feet Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. Mock Clamshells continued. DATE DESCRIPTION APPROVED Printed Card Heat Seal Area Delta Hang Hole Mock Clamshell with Delta Hang Hole Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. DATE DESCRIPTION APPROVED Delta Hang Hole Full Frontal Clamshell with Delta Hang Hole Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. DATE DESCRIPTION APPROVED Split Footed Standing Clamshell with Delta Hang Hole Foot Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. DATE DESCRIPTION APPROVED Clamshell Hingeless Clamshell with Card Card Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/28/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. DATE DESCRIPTION APPROVED RF Sealed Package with Front & Back Blister RF Sealed Package with Front Blister & Flat Back RF Sealed Packaging Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS RF Sealed Packaging continued. REV. DATE DESCRIPTION APPROVED "J" Hook RF Heat Seal Area RF Sealed Package with Front & Back Blisters Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS RF Sealed Packaging continued. REV. DATE DESCRIPTION APPROVED Flat Plastic Sheet RF Heat Sealed Area RF Sealed Package with Front Blister & Flat Back Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. DATE DESCRIPTION APPROVED Full Return Skirted Tray with Recessed Center Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. DATE DESCRIPTION APPROVED Short Skirted Insert Tray with Set-Up Box Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. DATE DESCRIPTION APPROVED Tri-Fold Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/26/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. DATE DESCRIPTION APPROVED G N DI N N TE PA E P T Tray Lock Trays with Sleeves D-Pack Tray Pillow Pack Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/28/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 1 Tray Lock Trays with Sleeves continued. REVISIONS REV. DATE DESCRIPTION APPROVED Tray Exploded View N TE D-Pack Tray PA D EN TP G IN with Tray Lock Printed Clear or Paper Board Locking Sleeve Front View: Full Assembly Back View: Full Assembly Half Assembled View NOTE: The Sleeve locks between the Header and Footer on the tray. (PATENT PENDING) Fully Assebled View Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/28/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 1 REVISIONS REV. Tray Lock Trays with Sleeves continued. DATE DESCRIPTION APPROVED (D-Pack Tray with Tray Lock) G N DI T PA T EN N E P Footer Header Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/28/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 1 REVISIONS Tray Lock Trays with Sleevs continued. REV. DATE DESCRIPTION APPROVED Exploded View G Tray N DI N Half Assembled View Pillow Pack N TE PA with Tray Lock E P T Fully Assembled View NOTE: The Sleeve locks between the Header and Footer on the Pillow Pack (PATENT PENDING) Sleeve Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/28/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 1 REVISIONS REV. Tray Lock Trays with Sleeves continued. DATE DESCRIPTION APPROVED (Pillow Pack with Tray Lock) Perf. Line PA TP N TE D EN G IN Footer Header Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/28/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2 REVISIONS REV. DATE DESCRIPTION APPROVED For further information on any of these thermoforming concepts, or if you have a specific project that you would like to discuss in detail, please contact one of our packaging experts at (973) 983-8500 Package Development Co., Inc. 100 Roundhill Drive, Rockaway, NJ 07866 (973) 983-8500, FAX (973) 983-8666 PROPRIETARY AND CONFIDENTIAL CUSTOMER: PROJECT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MATERIAL Package Development Co., Inc. ANY These designs are sole property of Package Development Co, Inc. REPRODUCTION IN PART OR AS A WHOLE and further design, development, engineering, debugging and WITHOUT THE WRITTEN PERMISSION OF FINISH prototype might be necessary to produce a functional product. Package Development Co., Inc, IS PROHIBITED. DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL 5 4 3 NAME DRAWN GDR Demo Packaging DATE 10/27/09 CHECKED 2 SIZE A DWG. NO. ALL TOLERANCES ARE REV 1/32 1 2
