Aimpoint

© DoD Photo
Red dot
sights for
Aimpoint Inc. 14103 Mariah Court
Chantilly, VA 20151, USA
Call Toll-free 1-877-246-7646
Phone +1 (703) 263-9795, Fax +1 (703) 263-9463
E-mail: [email protected] • www.aimpoint.com
AD & Photographer: Peter Ozberg • Other main photographers: Magnus Nyman, Henry Kokko, Jonas Wall, Ichiro Nagata • Printing House: Elanders AB, Malmö, SWEDEN
This printed material is for information purposes only and does not constitute any binding obligation or agreement by Aimpoint AB
All rights reserved. © 2008 Aimpoint AB. Art. No. 12249
Military
Law enforcement
t h e
P r e s i d e n t ´ s
l e t t e r
To Our Valued
Customers and Friends:
In 1974, a small group of Swedish entrepreneurs started exploring ways to improve
shooting accuracy. Their goal was simple
but ambitious - to create a sighting technology that would allow marksmen to quickly
and accurately acquire their target. Little did
they know at the time that their invention, the
Aimpoint sight, would revolutionize shooting
and hunting.
In basic terms, Aimpoint’s breakthrough
technology allows a shooter to do what
comes naturally - keep both eyes open while
focusing on the target. When a shooter looks
through an Aimpoint sight, a red dot appears
in the lens. The shooter can then quickly
superimpose the red dot on the target from
any angle. When the red dot is on the target,
you’re on target. It is this combination of
speed and accuracy that makes Aimpoint
sights the preferred choice for beginners and
experts alike.
The U.S. Army was the first military force
to recognize the full potential of Aimpoint’s
parallax free, red dot sighting technology.
In 1997, the Army awarded Aimpoint its first
contract for supply of red dot sights. Since
then, Aimpoint has delivered over 600,000
of its soldier-tested, combat-proven sights
to the U.S. Military. In 2006, Aimpoint was
awarded a new U.S. Army contract to deliver
163,000 of our new CompM4 sights, which
has now been selected as the latest version
of the Army’s M68 Close Combat Optic. This
contract was extended in 2007 with another
93,000 sights.
Military 2
Law Enforcement
Because of Aimpoint’s constant innovation
and dedication to its craft, the company
is recognized as the worldwide leader in
electronic sight systems development and
production. In the new Aimpoint CompM4
sight we have improved upon our Advanced
Circuit Efficiency Technology which now
allows the sight to operate for up to 8 years
of continuous use using a single AA battery.
We have also created the new Aimpoint
Micro series of sights, which are the smallest
and lightest sights rugged enough to wear
the Aimpoint brand. The Micro series sights
are small enough to be used in applications
where size and weight have limited the applicability of red dot sights in the past.
Throughout the world there are well over one
million hunters, sports shooting enthusiasts,
police and military personnel who use Aimpoint sights. We thank you for your continued
support. For those who have yet to use our
products, we look forward to showing you
how our technology will improve your shooting. Just wait until you see what we do next.
Sincerely
The President´s Letter page 2
Table of Contents page 3
Why Aimpoint red dot sight page 4
Latest Developments & Quality page 5
Micro T-1 page 6-7
page 8-9
Comp M4 CompM3 page 10-11
CompML3
page 12-13
l e
ta b
o f
C O N TE N T S
CompM2 page 14-15
CompML2/2X page 16-17
CompC3 page 18-19
3XMag page 20-21
CEU page 22-23
MPS3
page 24-25
LPI page 26-27
page 28-29
Mounting Solutions
Accessories page 30
Applications
page 31
Getting the most of your Aimpoint sight
page 32-33
Warranty and Customer Service
page 34
System of Systems
page 35
Technical Specifications
page 36-37
Lennart Ljungfelt
President
Military 3
Law Enforcement
why Aimpoint red dot sight
The Aimpoint Philosophy
When the time comes to shoot, there should
be absolutely no question that you can count
on your sight to perform. We believe that a
weapon sight should simplify aiming while
meeting the highest possible requirements
for reliability and ruggedness. We know
that conditions in the field place extreme
demands on your equipment, so we design
and test Aimpoint products to stand up to
any conditions you are likely to encounter.
We also design our products to operate
constantly for years on a single battery so
your sight will always be ready whenever
you need it.
Why a Red Dot Sight?
To be successful, shooters must be able to
aim accurately and quickly under a wide variety of conditions. On a shooting range, there
is plenty of time to take aim, but in the real
world, everything is in fast motion. Add rough
terrain, foul weather, poor light and high levels of stress and even the most experienced
marksman will be put to the test.
Red dot sights are superior to iron sights
and magnifying scopes in several ways.
Using these other types of aiming devices
require that the shooter’s focus leaves the
target. With iron sights, shooters must align
the rear and front sights with the target. With
scopes, the field of vision is severely limited,
and locating your target through a tube with
one eye closed wastes valuable time and
destroys your situational awareness.
latest Developments & Quality
The single red dot has been proven to be
the fastest type of reticle to place on target,
and provides the greatest increase in hit
probability on close quarter moving targets.
Red dot sights allow you to remain focused
on the target. Shooting with both eyes open
means that you remain in touch with what is
going on around you, and can deal with new
threats as they arise.
Why an Aimpoint Red Dot Sight?
Place the dot on your target
– from any angle
Aimpoint sights are parallax-free, which
means that the visible dot remains parallel
to the bore of your weapon no matter what
angle your eye is in relation to the sight.
This means you never have to worry about
centering the dot inside the sight. When the
dot is on target, so are you.
All conditions - Anywhere
Aimpoint sights work in all light conditions
from darkness to bright desert sunlight. They
are fully submersible so you never have
to worry about rain or immersion. Aimpoint
sights are developed and tested to be used
in any weather condition, from the sub-zero
temperatures of the Arctic to the heat and
humidity of the tropics.
On any type of firearm
Whether you have a rifle, shotgun, handgun
or crew-served weapon, Aimpoint has a sight
for you.
Standard features on all Aimpoint
sights
• Unlimited field of view
• Parallax-free and unlimited eye relief
• Unaffected by extreme weather conditions
• Extremely rugged, durable construction
• No hazardous materials
• No laser emission that could be harmful to your eyes
• Mechanical switch for speed and reliability
• Increased aiming confidence and hit probability
• Reduced training time and ammunition
consumption
Military 4
Law Enforcement
User friendliness
Aimpoint utilizes mechanical switches in
its sights. A mechanical switch has proven
to be the fastest and most reliable, since
it allows you to quickly change to the
right setting while simultaneously aiming
through your sight. Our rotary mechanical
switch won’t freeze like push button switches and are easy to use whether you’re
wearing gloves or not. As a safety feature,
Aimpoint’s LED (light emitting diode) sights
are completely safe compared to sights
that create a reticle with a laser emission,
which can be harmful to your eyes.
Environmental awareness
At Aimpoint, we take great pride in making
sure that neither hazardous nor radioactive materials are used in our sights.
Quality
Aimpoint sights are manufactured in accordance with ISO 9001 and meet the
highest standards of quality. Each sight is
hand-built at our state of the art facilities in
Sweden, assigned an individual identification number, and subjected to rigorous
testing and numerous quality control
checks during the manufacturing process.
Aimpoint’s Advanced
Circuit Efficiency Technology
Aimpoint’s new Advanced Circuit Efficiency
Technology (ACET) improves upon the
revolutionary CET technology that
Aimpoint introduced in 2000. ACET combines Aimpoint’s superior accuracy and
ease of use with significantly lower power
usage. ACET sights can last nearly 50,000
hours (over 5 years on setting 7 out of
10) of constant use from a single DL1/3N
battery.
That is 49,000 hours more than other
competitive sights on the same setting.
The new Aimpoint CompM4 sight can operate for over 80,000 hours (over 8 years)
of constant use from a single AA battery!
Aimpoint has taken another giant step
forward by applying its scientific expertise
in developing the Micro series of sights.
The Micro sights are small enough, yet
rugged enough to be used in any application imaginable.
Tests performed by the military have
repeatedly proven that the single red dot
is the reticle with which marksmen most
quickly fire a well aimed shot under timed
and rapid fire close combat exercises. Most Aimpoint sights are available in
two different dot sizes: 2 or 4 minutes of
angle (MOA). In terms of speed and accuracy, extensive trials have shown that
the 4 MOA is the optimal dot size for most
users in a close combat situation.
The 2 MOA dot is ideal for those who
frequently need to engage targets beyond
200 meters, and is the best choice for use
with the Aimpoint 3X magnifier.
Aimpoint - Global leader
Aimpoint is the recognized worldwide
leader and originator of red dot sighting
technology. After more than 30 years of
working closely with experienced marksmen and military weapon experts around
the world, Aimpoint red dot sights remain
the No. 1 choice for combining ruggedness,
speed and accuracy. Aimpoint sights are in
service with the US Army, the US Air Force,
the US Marine Corps, and numerous other
military forces, police agencies, and special
teams worldwide.
Military 5
Law Enforcement
Aimpoint
micro T-1
New
Product!
Unique features
of the Micro T-1
• Ideal for rifles, carbines, shotguns,
sub-machineguns and handguns.
• 1X (non-magnifying) parallax free
optic.
No matter what your mission, the size and
• Compatible will all generations of
Night Vision Devices (NVD).
weight of your equipment is a critical factor. With the
Aimpoint Micro T-1, Aimpoint has introduced an aiming
• 4 night vision compatible settings
and 8 daylight settings – one extra
bright for use with laser protection
glasses or in bright desert sunlight.
system that provides the performance of our full-sized
sights in the smallest package possible.
• Integral Picatinny-style mount allows easy attachment to any rail.
• Patent pending mount is keyed to
the sight body to absorb recoil.
• New ACET technology allows
50,000 hours (over 5 years) of constant operation from one battery.
• 4 MOA dot.
• Hard anodized non-reflective finish.
• Submersible to 80 feet (25 meters).
• Precision adjustments for windage
and elevation. Top of protective
caps fits into holes on adjustment
screws – no other tool required.
Built to offer the same battle proven ruggedness as other Aimpoint products,
the Micro T-1 is able to perform under extreme conditions while adding negligible weight to your weapon. Suitable for use on Rifles, Carbines, Shotguns, Sub Machineguns and Handguns, the Aimpoint Micro T-1 is ideal as
a stand-alone sight, and because it weighs less than 4 ounces including the
integrated Picatinny mount, it can easily be “piggybacked” on top of larger
magnifying scopes, night vision, or thermal imaging optics.
The performance of the Micro T-1 is optimized for use with all generations
of night vision devices (NVDs), but is especially suited for 3rd generation
night vision technology. Aimpoint’s unique band-pass coating on the front
lens gives the highest possible dot brightness, while providing the clearest,
brightest image possible when used with a 3rd generation NVD. With 4
NVD-compatible brightness settings and 8 daylight settings including one
extra-bright setting, the Micro T-1 is ready for use around-the-clock.
• Use as a stand alone sight or
“piggybacked” on larger magnifying,
thermal, or night vision optics.
“Piggybacked” on top of a
magnifying scope
Standard features
on all Aimpoint sights
• Unlimited field of view.
• Parallax-free and unlimited eye
relief.
• Unaffected by extreme weather
conditions.
• Rugged, durable construction.
• No hazardous materials.
• No laser emission that could be
harmful to your eyes.
• Mechanical switch for speed and
reliability.
• Reduced training time and
ammunition consumption.
• Increased aiming confidence.
Top of protective caps fits into
holes on adjustment screws,
no other tool required
For more technical information,
please take a look at page 36-37
Military 6
Law Enforcement
Call now Toll-free 1-877-246-7646 • www.aimpoint.com
Military 7
Law Enforcement
Aimpoint
CompM4
New
Product!
Unique features
of the CompM4
• Compatible with every generation of
Night Vision Devices (NVD).
• Super ACET technology allows up to
80,000 hours (over 8 years) of daytime operation on one AA battery.
The Aimpoint CompM4 is the latest version of the US Army’s
• 1X (non-magnifying) parallax free
optic.
M68 CCO (Close-Combat Optic), continuing a legacy that
Aimpoint has maintained since 1997. The CompM4 is the
• Internal voltage regulator allows the
CompM4 to be used with any AA
size battery.
finest sight that Aimpoint has ever produced. Having procured
over 600,000 Aimpoint sights the US Army continues to put
• 7 night vision compatible settings
and 9 daylight settings.
their trust in Aimpoint quality.
• Improved rotary switch will not suffer
damage under normal use.
• QRP2 mount has twice the clamping
force of the original QRP, and the
mounting knob is wider and shorter
to improve operation, and lessen the
chance of becoming snagged on
other gear.
• Mount base is “keyed” into the body
of the sight to absorb recoil.
• Mount base screws directly into
the sight – no separate sight ring is
required.
• 500,000 hours of use on NVD setting.
• 2 MOA dot for close combat and long
distance engagement.
The CompM4 offers enhanced ACET technology that provides over 8 YEARS of
continuous use from a single AA battery! Once turned on, Aimpoint sights stay on –
there is no automatic shut-off so your optic is ready whenever you need to use it.
The CompM4 incorporates an integral mount that eliminates the need for a separate ring, and can be customized with vertical and forward spacers to fit a variety of
weapon systems.
The performance of the Aimpoint CompM4 is optimized for use with all generations of night vision devices (NVDs), but is especially suited for 3rd generation night
vision technology. Aimpoint’s unique band-pass coating on the front lens reflects
select frequencies of red light at near 100% efficiency in order to give the highest
possible dot brightness with the smallest amount of energy while transmitting nearly
100% of light in the Infrared and near-infrared part of the spectrum to provide the
clearest, brightest image possible when used with a 3rd generation NVD. With 7
NVD-compatible brightness settings and 9 Daylight settings including one extrabright setting, the CompM4 is ready for duty 24/7.
• Matches perfectly with Aimpoint 3X
magnifier and Concealed Engagement Unit - CEU.
Improved rotary switch
• Unequalled light transmission allows
for enhanced low light operation.
• Front lens opening is threaded for
addition of killFlash® anti-reflective
device.
• Submersible to 150 feet (45 meters).
• Vertical spacer included.
• Standardized as the US Army’s new
M68 CCO.
• Improved adjustment caps are easier
to remove, and are protected against
impact.
New QRP2, stronger clamping
force and more ruggedized
mounting knob
• Can be used with a carry handle
adaptor for use on all M16 rifles.
For more technical information,
please take a look at page 36-37
Military 8
Law Enforcement
Call now Toll-free 1-877-246-7646 • www.aimpoint.com
Military 9
Law Enforcement
Aimpoint
Unique features
of the CompM3
CompM3
• 1X (non-magnifying) parallax
free optic.
• CompM3 is compatible with
Night Vision Devices.
• ACET technology allows
50,000 hours (over 5 years) of
operation from one battery.
• 500,000 hours of use on NVD
setting.
• Available in 2 dot sizes (2 and
4 MOA).
• Submersible to 150 feet
(45 meters).
• Comes with replaceable outer
black rubber cover.
• Outer rubber cover also available in Dark Earth Brown.
• May be used with 30 mm
mounts from any manufacturer.
When police and armed forces personnel are on duty, they
need their equipment to handle just about any situation, anytime, anywhere. That’s why Aimpoint created the CompM3,
a revolutionary sight that offers the highest standard available for sight systems technology.
Featuring our revolutionary Advanced Circuit Efficiency Technology (ACET),
the Aimpoint CompM3 offers over five years of constant on power from a single
DL1/3N battery. Built primarily for armed forces and police use, the CompM3 is
designed to hold up under rough physical handling and storage conditions as
well as the most severe weather conditions. The CompM3 is also compatible
with all generations of night vision device (NVD). The CompM3 comes with a
replaceable outer black rubber armor cover, which further protects the sight and
adds an additional stealth factor. This outer cover is also available as an accessory in a Dark Earth Brown color. See your Aimpoint dealer for details.
”
Standard features
on all Aimpoint sights
• Unlimited field of view.
• Parallax-free and unlimited eye
relief.
• Unaffected by extreme weather
conditions.
• Rugged, durable construction.
• No hazardous materials.
• No laser emission that could be
harmful to your eyes.
• Mechanical switch for speed and
reliability.
• Reduced training time and
ammunition consumption.
• Increased aiming confidence.
I have been using Aimpoint
sights in one form or another
since they first became available. I continue to use them
because of their history of
ruggedness, reliability and extraordinary battery life. I am so
confident in the battery life of
Aimpoint sights that I have two
M3´s that I never switch off.
Pat Rogers
Owner, EAG Tactical
10
Military Law Enforcement
© DoD Photo
© DoD Photo
For more technical information,
please take a look at page 36-37
Call now Toll-free 1-877-246-7646 • www.aimpoint.com
Military 11
Law Enforcement
Aimpoint
CompML3
Unique features
of the CompML3
• 1X (non-magnifying) parallax
free optic.
• CompML3 is designed for daylight and low-light conditions.
• ACET technology allows 50,000
hours (over 5 years) of operation
from one battery.
• Available in 2 dot sizes (2 and
4 MOA).
• Submersible to 150 feet
(45 meters).
• Comes with replaceable outer
black rubber cover.
• Outer rubber cover also available in Dark Earth Brown.
• May be used with 30 mm mounts
from any manufacturer.
The CompML3 is as tough as the CompM3, and features our
breakthrough Advanced Circuit Efficiency Technology (ACET)
that gives the sight unparalleled battery life and ease of use.
Built primarily for use in daylight and in low light conditions
for law enforcement and military applications, the CompML3
will hold up under the roughest physical handling and most
severe weather conditions.
The CompML3 is the right choice for operators who do not need Night Vision
capability, it comes with a replaceable outer black rubber cover, which protects
it from scratching and adds an additional stealth factor. The outer cover is also
available in a Dark Earth Brown color — perfect camo for use in the desert and in
the jungle.
12
Military Law Enforcement
”
Standard features
on all Aimpoint sights
• Unlimited field of view.
• Parallax-free and unlimited eye
relief.
• Unaffected by extreme weather
conditions.
• Rugged, durable construction.
• No hazardous materials.
• No laser emission that could be
harmful to your eyes.
• Mechanical switch for speed and
reliability.
• Reduced training time and
ammun-ition consumption.
• Increased aiming confidence.
Aimpoint keeps raising the bar on red-dot sights. With legendary
reliability and technology this advanced, I am completely confident
that the CompML3 atop my bedside AR will be ON when I need it
most, and when it comes to my go-to gun, I don’t take equipment
choices lightly.
Mike Nischalke
Senior Editor of the American Rifleman
Courtesy of Smith & Wesson
For more technical information,
please take a look at page 36-37
Courtesy of Smith & Wesson
Call now Toll-free 1-877-246-7646 • www.aimpoint.com
13
Military Law Enforcement
Aimpoint
Unique features
of the CompM2
CompM2
• 1X (non-magnifying) parallax free
optic.
• CompM2 is compatible with every
generation of Night Vision Devices
(NVD).
• 100,000 hours of use on NVD
setting.
• 4 MOA dot for close quarter combat.
• CET technology allows up to
10,000 hours (over 1 year) of daytime operation on one battery.
• Submersible to 75 feet (25 meters).
• Standard CQB sight for Special
Forces worldwide.
• Over 500,000 CompM2 (M68
CCO) in use by the US. Army and
U.S. Air Force.
First introduced in 2000, the CompM2 (M68 CCO) is
used by a long list of Armed Forces, including many elite
Special Forces throughout the free world. The CompM2
has long been the standard close-combat optic for the
U.S. Army, U.S. Air Force and many N.A.T.O. countries.
© DoD Photo
”
© DoD Photo
The Aimpoint CompM2 is also compatible with all generations of night vision
device (NVD). The performance of the CompM2 is optimized for use with all
generations of night vision devices (NVDs), but is especially suited for 3rd
generation night vision technology. Aimpoint’s unique band-pass coating on
the front lens reflects select frequencies of red light at near 100% efficiency
in order to give the highest possible dot brightness while transmitting nearly
100% of light in the infrared and near-infrared part of the spectrum to provide
the clearest, brightest image possible when used with a 3rd generation NVD.
Standard features
on all Aimpoint sights
I am currently stationed in Iraq in
support of Operation Iraqi Freedom and we have your products
on our M4 carbines. I would just
like to thank you for making such
an outstanding product. Our entire
unit is equipped with the Aimpoint
CompM2. Please keep up the
good work and know that your
products are keeping the men and
women of the United States safe
© DOD Photo
over here. Once again thank you
for making such a great product.
• Unlimited field of view.
• Parallax-free and unlimited eye
relief.
• Unaffected by extreme weather
conditions.
• Rugged, durable construction.
• No hazardous materials.
• No laser emission that could be
harmful to your eyes.
• Mechanical switch for speed and
reliability.
• Reduced training time and
ammunition consumption.
• Increased aiming confidence.
SrA Shaun P. Moylan
824 SFS,TaIIiI AB, Iraq
For more technical information,
please take a look at page 36-37
14
Military Law Enforcement
© DoD Photo
© DoD Photo
Call now Toll-free 1-877-246-7646 • www.aimpoint.com
15
Military Law Enforcement
Aimpoint
CompML2
The CompML2 is a specially modified version of our
groundbreaking CompC sight and is designed to meet
law enforcement and military needs. The CompML2 is
durable and can withstand the roughest physical handling and extreme weather conditions.
Unique features
of the CompML2
• 1X (non-magnifying) parallax free
optic.
• Designed for daylight and lowlight
conditions.
• 4 MOA dot for close quarter combat.
• CET technology allows up to
10,000 hours (over 1 year) of daytime operation on one battery.
• Submersible to 75 feet (25 meters).
Also used by Special Forces and police around the world, the CompML2
is primarily designed for use in daylight and in lowlight conditions. Like
the CompM2, this sight is legendary for its ability to stand up to extreme
weather and combat conditions and. The CompML2 is a great sight for
competition shooters and hunters that want a rugged sight, but don´t
need night vision compatibility.
Aimpoint
CompML2 2X
The CompML2 2X is a specially modified version of
the CompML2 equipped with a fixed, non-removable
two power magnifier. Unlimited eye relief gives the
CompML2 2X flexibility that no traditional magnified
scope can match.
Unique features
of the CompML2-2X
• Fixed 2X magnifier.
• Designed for daylight and lowlight
conditions.
• CET technology allows up to
10,000 hours (over 1 year) of operation on one battery.
• Submersible to 50 feet (15 meters).
• 2 MOA dot size for longer range
precision.
The 2 MOA dot size allows aiming more precisely at smaller targets
over longer distances. This rugged sight is a great complement to any
AR-15™ - style rifle or carbine. Using the CompML2 2X in conjunction
with Aimpoint 3XMAG magnifying module gives the user the
equivalent of a 6X 2 MOA illuminated reticle scope with the ability to
go back to 2X in about a second.
For more technical information,
please take a look at page 36-37
16
Military Law Enforcement
Call now Toll-free 1-877-246-7646 • www.aimpoint.com
17
Military Law Enforcement
Aimpoint
CompC3
Unique features
of the CompC3
The CompC3 is designed as the entry level sight for law
• 1X (non-magnifying) parallax free
optic.
• Designed for use in daylight or low
light settings.
• Available in 2 MOA and 4 MOA
dot sizes.
• ACET technology allows up to
50,000 hours (over 5 years) of
daytime operation on one battery.
• Reduced training time and
ammunition consumption.
• Submersible to 15 feet (5 meters).
enforcement - giving operators the features they need at
an affordable price. The CompC3 features boast 50,000
hours battery life, without the hard anodized coating
found on CompM-Series sights. The CompC3 is excellent
for use with shotguns or scout rifles, and can be ordered
with either a 2 MOA or 4 MOA dot.
The Aimpoint CompC3 is designed for use in daylight or low-light settings.
Excellent quality and performance at a user friendly price. The CompC3 is supplied with an extra-wide 30 mm Weaver-style ring for mounting at barrel level on
any Weaver-style base or rail. Also compatible with any other 30 mm mounts
available.
18
Military ”
Law Enforcement
Standard features
on all Aimpoint sights
• Unlimited field of view.
• Parallax-free. No centering required.
• Unaffected by extreme weather
conditions.
• Rugged, durable construction.
• No hazardous materials.
• No laser diode that could be harmful to your eyes.
• Mechanical switch for speed and
reliability.
• Reduced training time and
ammunition consumption.
• Increased aiming confidence.
I have evaluated a lot of sighting equipment over the years in my job as a
firearms writer and editor, and I have found that Aimpoint sights are as good
as it gets. Aimpoint sights are rugged, reliable and adaptable to just about any
conditions imaginable. The fact that the US military uses Aimpoint sights by the
hundreds of thousands is an indication of just how good Aimpoint sights really
are. I especially like the recently introduced 3X Magnifier and TwistMount that
instantly turn the 1X Aimpoint optic into a telescopic sight, with the added capability of being used as a handheld telescope.
Charlie Cutshaw
Editor, writer and recognized authority on small arms technology
For more technical information,
please take a look at page 36-37
Call now Toll-free 1-877-246-7646 • www.aimpoint.com
19
Military Law Enforcement
Aimpoint
3XMag
From CQB to semi-sniping capability
and vice versa in a split second
The Aimpoint 3XMag magnifying module is specially
designed for use with Aimpoint sights and offers the
shooter the ability to engage targets at extended ranges.
When combined with Aimpoint’s patented TwistMount,
the 3XMag gives the shooter something never before
possible — the ability to switch from CQB (Close Quarters
Battle) to semi-sniping and back with a flick of the wrist.
The 3XMag is ideal for perimeter security and sniper sup-
1
2
3
4
port missions. The versatile 3XMag can also be used as a
handheld magnifying monocular for discrete observation
and target identification.
Art. No. 11324
Unique features of the 3XMag
• Ready to mount behind Aimpoint sights
• Provides extended engagement range to the operator
• Combines the best of two worlds, CQB and semi-sniping
• Increases confidence, performance and flexibility
• Extremely fast on/off quick change mounting solution
• Mounting and dismounting the magnifier has no influence on point
of impact of your sight. No need to re-zero the sight after changing
magnifier.
• Internal adjustments allow centering the magnifier to your sight.
• Rubber armor increases ruggedness.
• Drilled and tapped for use with other accessory mounts.
• Spacer available to accommodate a wide variety of weapons.
• Doubles as handheld 3X monocular
• May also be used as an accessory with sights from other manufacturers.
Military 20
Law Enforcement
”
1. CQB capability 2. Place the 3XMag on the TwistMount base
3. Turn clockwise into its final position 4. Semi-sniping capability
Technical Specifications
Optical System
Magnification Objective diameter Field of view (FOV) Exit pupil diameter When we at the Danish Counter
Terrorist Unit (AKS) equipped our
I have
evaluated
a lot of
sighting
Diemaco
C8 rifles
with
Aimpoint
equipment
over
the years
in my
job
CompM2
sights,
we also
equipped
as athem
firearms
and
editor, and
I
with writer
3XMag
magnifying
modhave
found
Aimpoint
sights
ules.
Wethat
have
found that
thisare
is a
as good
as it gets.
sights with
very useful
toolAimpoint
in combination
are the
rugged,
reliable
andInadaptCompM2
sight.
a hostage
ablesituation
to just about
anyshoot
conditions
we can
very accuimaginable.
fact that
the US
rately at The
distances
ranging
from 50
military
sights
by later,
m touses
150 Aimpoint
m and a split
second
the thanks
hundreds
of thousands
is anfeature
to the
quick release
indication
of just how good
Aimpoint
of the TwistMount,
we can
use our
sights
really in
are.
I especially
likeWe
thecan
weapon
other
situations.
recently
introduced
3X Magnifier
and
also identify
a threat
at quite long
TwistMount
that
instantly
turn
the
distances
both
with the
3XMag
1X Aimpoint
into
a telescopic
mounted optic
on the
weapon
or as a
sight,
withheld
the magnifying
added capability
hand
tool.. of
being used as a handheld telescope.
Physical Specifications
Dimensions, L x W x H Weight Material housing
Environmental Specifications
Temperature range Humidity Water resistance 3X
20 mm
7°
7 mm
110 mm x 44 mm x 41 mm
4.3” x 1.7” x 1.6”)
200 g (7.1 oz) including rubber cover
Anodized aluminum, dark grey,
rubber covered black
-45° C to + 70° C, -50° F - +160° F
in operation and storage
0 – 100% condensing or non-condensing
Submersible to 20 m (67 ft)
Mechanical interface
The 3XMag is provided with a 30 mm diameter tube (for mounting) and with 4
screw holes in the bottom surface for other mounting alternatives. The recommended mount for the 3XMag is the Aimpoint Twist Mount, which allows for
quick attachment and detachment. The Aimpoint TwistMount fits any MIL-Std
1913 Picatinny Rail. See page 28 for more details.
Member of Danish Counter Terrorist
Team (AKS)
Editor, writer and recognized
authority on small arms technology
Charlie Cutshaw
Call now Toll-free 1-877-246-7646 • www.aimpoint.com
Military 21
Law Enforcement
Aimpoint
CEU
New
Product!
Technical Specifications
The Aimpoint CEU (Concealed Engagement Unit) is the
latest component incorporated into Aimpoint’s unique
System-of-Systems™ approach. It gives the operator
the ability to observe and/or engage a threat from a
concealed or covered position. The Aimpoint CEU easily
rotates from side to side, so an operator can safely look
around either right- or left-hand corners. It can also be
quickly removed to rapidly return to direct engagement.
Export license/End-user certificate is required for this product. Art. No. 12156
The Aimpoint CEU turns an operator’s standard weapon into a scouting
tool that allows him to look over walls, under cars or around corners
without exposing themselves to a potentially hostile situation. It’s no
longer necessary to equip a single team member with a special weapon
or an expensive and fragile electronic device to make this possible.
Since the Aimpoint CEU does not affect the weapon’s point of impact,
it can easily be passed from one member of a unit to another as long
as both weapons are outfitted with the proper interface. There is
simply no other device on the market using the same technology. The
recommended mounting solution for the Aimpoint CEU is the Aimpoint
TwistMount™.
­ The Aimpoint CEU is a patented system developed by DSTO in
Australia, under the name Off-Axis Viewing Device (OAVD). Aimpoint
has world-wide exclusive rights for production and sales outside
Australia.
The Aimpoint CEU rotates a full 260° allowing the operator to safely
look around either right or left-hand corners, up staircases or down
tunnels from almost any angle.
Featured on pictures above : CEU with Aimpoint® TwistMount™
(Base & high Top ring), for more information see page 28.
22
Military Law Enforcement
Features of the Aimpoint CEU™
• Designed to be compatible with all Aimpoint sights
• Constructed to provide a ‘true image’ NOT a
mirror image
• Allows aiming above walls, under cars, around corners without exposing oneself
• Does not affect the weapon’s point of impact
• Can be passed between team members
• Rugged and affordable device
• Small and light
• Easily removed from the weapon if necessary
• Turns a standard infantry weapon into a
scouting tool
• No need to equip a team member with a special-
ized weapon
• Rotates a full 260°
• Designed to withstand extreme conditions
Optical System
Operating Principle
Optical Magnification
Clear Aperture
Optical Coating
Optical Signature
Two mirrors, reflective device, for true
target view
1 x, unlimited eye relief
25 mm diameter “see through”
Anti reflex coated protection elements and high reflection coated mirrors for maximum transmission, NVD compatible
The unit does not influence the forward optical signature
Physical Specifications
Dimensions length width height* height height Height of optical axis**
Rotation around optical axis
Weight
Material - Housing
Material Cover
87 mm (3.4”)
115 mm (4.5”)
51 mm (2”) CEU with low Top ring, attached to the TwistMount™ on the Picatinny Rail
60 mm (2.4”), CEU with high Top ring, attached to the TwistMount™ on the Picatinny Rail
42 mm (1.7”) CEU with low Top ring, detached from the TwistMount bottom
51 mm (2”) CEU with high Top ring, detached from the TwistMount bottom
42 mm (1.7”) CEU only, detached from the TwistMount Top ring and TwistMount bottom
30 mm (1.2”) or 39 mm (1.5”) alternatively
±130°, measured from CEU pointing vertically upwards, as reference
135 grams (4.8 oz), CEU only, separated from the TwistMount.
Low Top ring 32 grams (1.1 oz)
High Top ring 54 grams 1.9 oz)
TwistMount bottom part 60 grams (2.1 oz)
High strength, glass reinforced, PP polymer, black, non-glare finish
Rubber, black, non-glare finish
Environmental Specifications
Temperature Range,
Operating and Storage
-45 oC to +71 oC (-50 oF to +160 oF)
Mechanical Interface
Mount
Mount for MIL-STD 1913 Rail System “Picatinny Rail”, via the Aimpoint TwistMount
* over top surface of Picatinny Rail and with CEU sidewards, “horizontally” rotated
** over top surface of Picatinny Rail
23
Military Law Enforcement
Aimpoint
Unique features
of the MPS3
MPS3
• 1X (non-magnifying) parallax free
optic.
• Compatible with every generation of
NVD.
• ACET technology combined with a
AA battery gives 80,000 hours (over
8 years) of typical usage on one
battery.
• 500,000 hours of use on NVD
setting.
• Designed to stand up to recoil of
heavy weapons.
• One Function Principle for simplicity
of use in field.
• Manually adjustable reticle brightness.
• Accessory rails on sight allow for
mounting IR or visible lasers.
• Multi Purpose Sight for use on land,
air and at sea.
• 7 night vision compatible settings,
9 day settings of which one extra
bright.
• 2 MOA dot size for long distance
engagement.
• Can be used with any AA size
battery.
The Aimpoint MPS3 is the third generation of passive
electronic reflex collimator sights suitable for medium or
heavy support weapons. The MPS3 has been developed
primarily for military applications. It is ideal for use on
mounted weapon systems on land vehicles, helicopters
or ships. Its simplicity of use, based on the “One Function
Principle” allows the user to concentrate on the target
and operate the sight even with thick winter gloves.
The Aimpoint MPS3 is a non-magnifying sight with unlimited eye relief allowing a rapid speed of target acquisition. The MPS3 features manually adjustable reticle brightness for all light conditions. Thanks to its NVD compatibility,
the MPS3 can be used 24 hours a day. Aimpoint’s revolutionary ACET technology gives the Aimpoint MPS3 an improved LED and an impressive battery
lifetime of many thousands of hours of active use.
A new mount has been designed to be used with the MPS3 – the Aimpoint
MG Mount. The MG Mount contains a user friendly 3-step ballistic compensator for preset zero at 200, 800 and 1200 meters (220, 875, 1310 yards).
The ballistic compensation can quickly be changed without losing eye contact with the target, and can be accomplished even while wearing gloves.
For more information see page 26.
Integrated Picatinny rails on top and
side for attachement of accessories
such as a laser aiming device
Standard features
on all Aimpoint sights
• Unlimited field of view.
• Parallax-free. No centering required.
• Unaffected by sub-zero temperatures.
• Rugged, durable construction.
• No hazardous materials.
• No laser diode that could be harmful to your eyes.
• Mechanical switch for speed and
reliability.
• Reduced training time and
ammunition consumption.
• Increased aiming confidence.
3- step ballistic compensator
Export license/End-user certificate is required for this product.
For more technical information,
please take a look at page 36-37
24
Military Law Enforcement
Call now Toll-free 1-877-246-7646 • www.aimpoint.com
25
Military Law Enforcement
Aimpoint
LPI
Technical Specifications
Article No. 10932
The Aimpoint LPI, IR Laser Aiming Device is an active
infrared aiming device or target designator for military
Light source
Wavelength
Beam output power
Beam Shape
Beam divergence
Laser class
Setting High
840 nm (IR)*
0.1 mW**
5 x 2 mm
typ 0.5 mrad
1**
Setting Low
840 nm (IR)*
0.005 mW**
5 x 2 mm
typ 0.5 mrad
Adjustment of laser beam
and Law Enforcement applications in darkness or poor
Power supply
light conditions. The IR laser is a development based on
Adjustment range of laser beam
Quantity
Power
Size
Type
1
3V
DL1/3N, 2L76
LiMn02
Battery
long experience in engineering and manufacturing of
1 Click = 0.28 mrad
± 20 mrad
Unless indicated otherwise, the data is accurate at ambient room temperature and normal operating conditions
*Typical
lasers ranging from handguns to military infantry rifle
** Important notice: Beam output power will be set as required by the user. The user is solely responsible for the observation of
the applicable safety regulations. The max and the min level can be separated by a factor of no more than 20.
applications.
Dimensions
Housing width
Housing height
Overall (housing) length
44 mm ± 0.5 mm
24 mm ± 0.5 mm
(47.5 ± 2 mm) 77 mm ± 2 mm
Estimated weight including battery <130 gr
Note
To make the product complete, a cable with switch and a mount interface must be determined by the user and ordered
with the Aimpoint LPI. 4 different mounting solutions are available and the cable is offered at customized length.
Mounting solutions
Unique features
of the LPI
• Customized intensity setting
according to each unit’s needs.
2 effect levels can be selected
from 0,005-3,5mW. The max and
the min level can be separated by
a factor of no more than 20.
• Laser axis fully adjustable.
• Powered with same battery type
(DL 1/3N) as some Aimpoint red
dot sights.
• Fits right on an Aimpoint CompM
sight.
• Submersible to 10 meters (30 ft).
• The smallest military IR Laser
Aiming Device available on the
market.
The Aimpoint LPI can be mounted with any of the following interfaces.
 
LPI-S
Art. No. 10932
The Aimpoint LPI is intended as a complement to the passive aiming systems from
Aimpoint sights. It is designed to fit directly on the top ring of an Aimpoint CompM2,
or CompM3 red dot sight, which means that no special rail system is required.
The LPI may also be mounted on any Picatinny rail using an adaptor. The LPI is a
unique tool that fits perfectly on an Aimpoint sight, and enhances the red dot sighting
capability and meets the need for an active targeting lasers.
The LPI is a low powered IR laser designed for tactical team use in building clearing or
close combat conditions without overpowering your night vision equipment or reflecting
off of interior surfaces. It is not designed for long range target illumination.
The selector switch on the Aimpoint LPI allows the user to quickly change the
desired intensity of the IR beam. The LPI can be quickly be adjusted for windage and
elevation independently of the red dot sight it is mounted on.
Mount for Aimpoint® standard ring
LPI-Q
LPI-A
Mount for Aimpoint®
Mount for ARMS ring
QR ring
LPI-U
Mount for ARMS Picatinny rail grabber
Reinforced cable
The lenght (y in mm) of the reinforced cable with waterproof
switch pad shall be measured as shown on the drawing beside:
Adjustment button for low
or high setting of the laser
Export license/End-user certificate is required for this product.
Military 26
Law Enforcement
Call now Toll-free 1-877-246-7646 • www.aimpoint.com
27
Military Law Enforcement
Aimpoint
Mounting Solutions
SRP-L
Low Wide Ring, 30 mm, black,
Comp-series - 1X
Fits on Picatinny rail (MIL-STD 1913)
Art. No. 12243 *
SRW-L
Low Wide Ring, 30 mm, black,
for Comp-series - 1X
Fits on Weaver rail
Art. No. 12244 *
SRP-M
Wide Ring, 30 mm, black,
Medium High, for 2X Comp-series
Fits on Picatinny rail (MIL-STD 1913)
Art. No. 10830 *
SRW-M
Wide Ring, 30 mm, black,
Medium High, for 2X Comp-series
Fits on Weaver rail
Art. No. 10831 *
CEU High Rise ring
Ring for CEU. Fits on TwistMount Base
39 mm height of optical axis
Art. No. 12203
CEU Low Rise ring
Ring for CEU. Fits on TwistMount Base
30 mm height of optical axis
Art. No. 12202
Spacer
Spacer for QRP/QRW Mounts
Raises height of optical axis from
30 to 39 mm
Art. No. 12227 *
Standard Spacer
Spacer for QRP2/QRW2 Mounts
Raises height of optical axis from
30 to 39 mm
Art. No. 12192 *
Extension Spacer
Spacer for QRP2/QRW2 Mount
Raises height of optical axis from
30 to 39 mm and brings sight
40 mm forwards
Art. No. 12193 *
QRP Mount
Quick Release Ring
for Comp-series - 1X
Fits on Picatinny rail (MIL-STD 1913)
Return to zero after dismounting
(Spacer is necessary for M4 flat top
rifles and carbines)
Art. No. 12245 *
QRP2 Mount
Quick Release Picatinny
(MIL-STD 1913) Mount
Fits CompM4 and Ring Base & Top
Return to zero after dismounting (Spacer is
necessary for M4 flat top rifles and carbines)
Art. No. 12195 *
QRW2 Mount
Quick Release Weaver Mount
Fits CompM4 and Ring Base & Top
Return to zero after dismounting (Spacer is
necessary for M4 flat top rifles and carbines)
Art. No. 11758 *
TNP Mount
Torsion Nut Picatinny (MIL-STD 1913) Mount
Fits CompM4 and ring Base & Top
Art. No. 12197 *
Ring Base & Top
Base and Top 30 mm ring
Fits QRP2, QRW2 and TNP mounts
Art. No. 12194 *
Micro LRP Mount Kit
Kit to convert Micro Mount to
Lever Release Picatinny
Art. No. 12184
Micro 11 mm Dovetail Mount
Fits most of the 11 mm Dovetail Bases,
ranging from 10-12,5 mm
Allen key incl.
Art. No. 12215
QRW Mount
Quick Release Ring for
Comp-series - 1X
Fits on Weaver rail
Return to zero after dismounting
(Spacer is necessary for M4 flat top
rifles and carbines)
Art. No. 12246 *
TwistMount
Quick Release ring for 3XMag
Fits on Picatinny rail (MIL-STD 1913)
Art. No. 12234 *
TwistMount ring
Separate ring for TwistMount
Art. No. 12238 *
* Screws and Allen key included
TwistMount base
Separate base for TwistMount
Fits on Picatinny rail (MIL-STD 1913)
Art. No. 12236
Mount for MPS3
Contains a 3-step ballistic compensation for 200, 800 and 1200
meters (220, 875, 1310 yards) distances. The mount is also used
to zero the MPS3 sight. Export license/End-user certificate is
required for this product.
Art. No. 11459 *
28
Military Law Enforcement
* Screws and Allen key included
Call now Toll-free 1-877-246-7646 • www.aimpoint.com
29
Military Law Enforcement
Aimpoint
Accessories
Flip-up Front Cover
For CompML2-2X
Art. No. 10311
Aimpoint
Flip-up Front Cover
For 1X Comp sights
Art. No. 12223
Flip-up Rear Cover
For Comp sights
Art. No. 12224
Aimpoint Micro T-1 on B&T MP9
Aimpoint Micro T-1 on H&K MP7
ARD
KillFlash® filter for 1X Comp sights
Art. No. 12239
Aimpoint CompML3 Flip-up Front Cover
Transparent
For 1X Comp sights
Art. No. 12241
Rubber Bikini Lens Cover
For Micro T-1
Art. No. 12204
Flip-up Rear Cover
Yellow Filter
Polarization Filter
Transparent
For Comp sights
Art. No. 12240
Yellow Filter for contrast increase.
Fits rear of Comp Sights
Art. No. 12218
Polarization Filter for reduction of
sun reflexes. Fits rear of Comp sights
Art. No. 12216
Lenscover
For CompM2 & CompML2 with QR
Art. No. 12228
Applications
Rubber Bikini Lens Cover
For CompM4
Art. No. 12205
with QRP mount
on H&K MP7
Aimpoint CompM4 and 3XMag with TwistMount on Diemaco CQB
Aimpoint CompM4 on Diemaco CQB
AA Battery
Alkaline
For CompM4
and MPS3
Art. No. 12242
Double Battery kit
For CompM2, CompML2
and CompM3, CompML3
Art. No. 12247
Outer rubber cover
Color: Black
Fits CompM3 & CompML3
Art. No. 12225
30
Military Law Enforcement
CR 2032
Lithium Battery
For Micro T-1
Art. No. 12211
Aimpoint CompM3 with QRP mount and
spacer on Diemaco CQB
on SIG 552 Commando
with TwistMount base
mounted behind the sight,
ready to accept the 3XMag
DL1/3N, Lithium Battery
For CompM2, CompML2,
CompML2-2X, CompM3 and
CompML3
Art. No. 10315
Aimpoint CompM4
Outer rubber cover
Color: Dark Earth Brown
Fits CompM3 & CompML3
Art. No. 12226
Aimpoint CompM2 with QRP mount and
3XMag with TwistMount
on FN Minimi (M249 Para)
31
Military Law Enforcement
getting the most of your Aimpoint sight
How to zero
Aimpoint sights are easy to zero
CAUTION: Place the firearm in a safe condition
prior to handling or making any sight adjustments.
Aimpoint’s red dot sights are optically centered.
That means that if the mount base is properly
aligned with your firearm’s action, only minor adjustments should be necessary. It is easiest if you
start the zeroing process from a short distance. We
recommend 25 yards or less. This allows you to
immediately see if further adjustments need to be
made, which in turn can save you time and ammunition.
Once you have set up a target, get the firearm
in a solid rest, aim at center of the target, take
your first shot and inspect the point of impact, (fig
1&2). Check how well the sight is zeroed and then
make any necessary adjustments (fig 3). Aimpoint’s
adjustment screws are located on the top and
sides of the sight, which allows for impact points to
be moved up/down or right/left. After zeroing the
sight at 25 yards, you are ready to zero at greater
distances.
Aim straight, shoot better
It’s simple. Keep both eyes open.
For a moment, lower your firearm and focus both
eyes on the target. Next, without taking your eyes
off the target, bring your firearm into position so
that you are now looking at the target through the
Aimpoint sight (fig 4). The red dot will now be on
the target (fig 5). It’s that easy! When the dot is on
target, so are you. Since all Aimpoint sights are
parallax free, you never have to worry about
centering the red dot inside the sight.
We recommend this simple training exercise.
Cover the front of your Aimpoint sight with the lens
cover (fig 6). Then bring your firearm into position
while keeping both eyes focused on the target. The
red dot will now be on the target (fig 5). Practicing
this simple procedure will get you comfortable with
keeping both eyes open while aiming at the target.
That’s because with a traditional sight, your field
of view is limited. You lose valuable time focusing
through the sight rather than focusing on the target.
You also lose eye contact with the target and you
don’t get a general view of the situation and surroundings.
After performing these exercises you are ready to
get the most out of your Aimpoint sight. You will see
how much easier and faster it is to aim your firearm
with an Aimpoint sight and you will improve your
shooting.
Mounting the sight
With the variety of models available, there is an
Aimpoint sight for virtually every type of firearm. For
a sight and a gun to function as a reliable unit year
after year, it is important that the mounting is done
professionally and the mounting rings and bases
are of high quality.
The Aimpoint red dot sight does not have a critical eye relief. This provides great freedom in locating the sight along the length of the rifle, and makes
it very easy to fit them into a modular system that
allows the mounting of several different types of
sights on the same rifle.
Aim straight shoot better
Fig 1
1. Set up target at close range (less than 25 yards).
2. Place firearm in solid rest and center dot
on target.
Fig 2
3. Take one shot.
Fig 4
Learn to aim with both eyes open without
taking your eyes of the target.
Fig 5
With your firearm shouldered, with both
eyes open and focused on the target, the
dot will naturally appear where you want
your shot to hit.
A
B
Fig 3
4. Replace firearm on solid rest with dot on
target (A).
5. Without moving the firearm, turn adjustment screws until red dot is centered over
bullet´s point of impact (B).
6. Repeat as necessary until point of aim
and point of impact are the same.
Fig 6
Practice aiming with both eyes open and
the front lens of the sight covered. After
some training, you will be able to aim
your firearm more easily and faster than
ever before.
Point of impact adjustment
At 25 yards, 1 click equals 1/8 inch At 50 yards, 1 click equals 1/4 inch
At 100 yards, 1 click equals 1/2 inch At 200 yards, 1 click equals 1 inch 32
Military Law Enforcement
At 25 meters, 1 click equals 3.25 mm
At 50 meters, 1 click equals 6.5 mm
At 100 meters, 1 click equals 13 mm
At 200 meters, 1 click equals 26 mm
33
Military Law Enforcement
Warranty and Customer Service
Aimpoint´s System-of-Systems™
Integrated combat optics solution
Customer Service
Here at Aimpoint, we are delighted to have you as a customer.
In addition to offering the best products in the marketplace, we
are committed to providing our valued customers with the finest
customer service available. Whatever your question, comment,
or problem, just give us a call Toll Free at 1-877-246-7646
between 8:30 a.m. and 4:30 p.m. (EST), Monday-Friday, or
e-mail us anytime at [email protected] Our courteous and
informed staff is ready to help.
Aimpoint has distinguished itself as a supplier of sophisticated
modular sighting systems, offering end users not just stand
alone products but rather a complete modular optical solution. Although the primary focus for Aimpoint has always been the
electronic reflex collimator (red dot) sight, which is the core of
the Aimpoint’s System-of-Systems approach, we also offer a
choice of modular accessories that can be used together with
Aimpoint sights in order to enhance an operator´s capabilities.
CEU
Dealership Eligibility
Dealership eligibility and requirements for the USA may be
obtained by contacting Aimpoint Inc. at 1-877-246-7646.
Warranty Information
Aimpoint values your business and always attempts to provide
you the very best of products and services. That’s why we back
our products with one of the best guarantees in the industry.
Our products are guaranteed to be free from original manufacturer defects in material and/or workmanship under normal
use from the date of purchase for ten (10) years for personal
use and two (2) years for professional or competition use. If
a defect that is covered by our warranty occurs during that
period, Aimpoint, at its option, will either repair, or replace
the product.
In our System-of-Systems solution, the versatile TwistMount enables accessories such as the Aimpoint 3XMag (magnification module, see picture below)
and the Aimpoint CEU (concealed engagement unit, see picture above) to be
rapidly fixed behind Aimpoint sights. Night Vision Devices (NVD’s) of all types
and generations can also be added as part of this modular system.
All Rights Reserved
All Aimpoint products are covered by several international
patents. Comp is a registered trademark of Aimpoint AB,
Malmö, Sweden. We reserve the right to make design
and/or material modifications without further notice.
This printed material is for information purposes only
and does not constitute any binding obligation, or
agreement by Aimpoint AB.
© 2008 Aimpoint AB
www.aimpoint.com
Military 34
Law Enforcement
”
3XMag
I am writing this note to tell about the super treatment I have
received from Aimpoint Inc.’s customer service center. The
person who helped me has gone beyond just doing his job and
has been so attentive and helpful to a small customer that I felt
I had to let you know how pleased I am with the service. I live
in California and treatment like this is rare anymore and it says
a lot about your company. Because of that I have purchased a
new Aimpoint sight and will pass the good service information
to all my shooting friends
Dudley Owens
Since the accessories are placed behind the red dot sight, they
do not affect the point of impact. Therefore, they can easily be
passed from one member of a unit to another as long as both
weapons are outfitted with the proper interface – the base of the
Aimpoint TwistMount which fits any MIL-STD 1913 Picatinny rail.
There is simply no other device on the market using the same
technology. Aimpoint’s modular System-of-Systems approach
enables the operator to modify their equipment for each specific
mission, and to rapidly adapt to changing conditions in the field.
Military 35
Law Enforcement
Military 2
Law Enforcement
Aimpoint Technical Specifications
Application
areas
Law Enforcement
Armed Forces - Special Units
Application Firearms
Pistol - Revolver
Carbine
PDW (personal weapon defence)
SMG (sub-machine gun)
LMG (light machine gun)
MMG (medium machine gun)
HMG (Heavy machine gun)
Micro T-1 •
•
CompM4 •
•
CompM3 •
•
CompM2 •
•
CompML3
•
•
CompML2
•
•
CompML2 -2X •
◦
CompC3 ◦
-
MPS3 -
•
•
•
•
•
-
-
-
-
•
•
•
•
•
-
◦
•
•
•
•
•
-
◦
•
•
•
•
•
-
◦
•
•
•
•
•
-
◦
•
•
•
•
•
-
◦
•
-
-
-
-
-
•
◦
◦
◦
-
-
-
-
•
Technology
ACET (Advanced Circuit Efficiency Technology)
x
x
x
x
CET (Circuit Efficiency Technology)
x
x
x
x
x
Optical Data
Reflex collimator sight - red dot sight
x
x
x
x
x
x
x
x
LED (Light Emitting Diode) totally eye-safe
x
x
x
x
x
x
x
x
Red dot size - in MOA (minutes of angle)*
4
2
4 or 2
4
4 or 2
4
2
4 or 2
Parallax-free - No centering required
x
x
x
x
x
x
x
x
Unlimited eye relief
x
x
x
x
x
x
x
x
Anti-reflex coating all surfaces & multi-layer coating
Band Pass coating for NVD compatibility
x
x
x
x
Anti-reflex coating all surfaces & multi-layer coating x
x
x
x
No magnification (1X)
x
x
x
x
x
x
x
Fixed 2X x
Electronic Data
One 3V Lithium battery, type
CR2032
2L76 or DL1/3N
2L76 or DL1/3N
2L76 or DL1/3N
2L76 or DL1/3N
2L76 or DL1/3N
2L76 or DL1/3N
One AA battery, accepts 1.5-5V
x
Battery life in hours***
50 000
80 000
50 000
10 000
50 000
10 000
10 000
50 000
Battery life, in hours, NVD position***
500 000
500 000
500 000
100 000
Manual rotary switch
x
x
x
x
x
x
x
x
1 Off and daylight (DL) settings
9 DL
9 DL
9 DL
9 DL
NVD and daylight (DL) settings 4 NVD & 8 DL of
7 NVD & 9 DL of
4 NVD & 6 DL of
4 NVD & 6 DL of
which one extra bright which one extra bright which one extra bright which one extra bright
Mechanical data
Material housing, extruded high strength aluminum
Surface finish, hard anodized, matte
Surface finish, anodized, semi-matte
Color black
Material lens covers -Thermoplastic Elastomer, black matte
Material lens covers - rubber - black - matte
Adjustment 1 click = Mounting solution x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1/2” at 100 yds
1/2” at 80 yds
1/2” at 100 yds
1/2” at 100 yds
1/2” at 100 yds
1/2” at 100 yds
1/2” at 100 yds
1/2” at 100 yds
13 mm at 100 m
16 mm at 100 m
13 mm at 100 m
13 mm at 100 m
13 mm at 100 m
13 mm at 100 m
13 mm at 100 m
13 mm at 100 m
Integrated Picatinny/
Integrated QRP2
1 ring - 30 mm
1 ring - 30 mm
1 ring - 30 mm
1 ring - 30 mm
1 ring - 30 mm
1 ring - 30 mm
Weaver
(Quick release)
Environmental data
Temperature range -20°- +140° F (-30° - +60° C)
x
Temperature range -50°- +160° F (-45° - +71° C)
x
x
x
x
x
x
x
Water resistance - submersible to 80 ft. (25 m)
150 ft. (45 m)
150 ft. (45 m)
80 ft. (25 m)
150 ft. (45 m)
80 ft. (25 m)
80 ft. (25 m)
15 ft. (5 m)
No radioactive components used
x
x
x
x
x
x
x
x
Dimensions
Length
2.4” (62 mm)
4.7” (120 mm)
5.1” (130 mm)
5.1” (130 mm)
5.1” (130 mm)
5.1” (130 mm)
6.5” (165 mm)
4.9” (125 mm)
Width/height - sight only
1.6” x 1.4”
2.1” x 2.4”
2.2” x 2.2”
2.2” x 2.2”
2.2” x 2.2”
2.2” x 2.2”
2.4” x 2.4”
2.2” x 2.2”
(41 x 36 mm)
(53 x 60 mm)
(55 x 55 mm)
(55 x 55 mm)
(55 x 55 mm)
(55 x 55 mm)
(60 x 60 mm)
(55 x 55 mm)
Width/height - including mount
2.4” x 1.6”
2.8” x 2.8”
(62 x 41 mm)
(72 x 72 mm)
Maximum ring width
30 mm
30 mm
30 mm
30 mm
30 mm
30 mm
Weight - sight only 3.0 oz (84 g)
9.3 oz (265 g)
7.8 oz (220 g)**
7.8 oz (220 g)**
7.8 oz (220 g)**
7.8 oz (220 g)**
10.3 oz (290 g)**
7.1 oz (200 g)
Weight - sight with integrated mount
3.7 oz (105 g)
11.8 oz (335 g)
Weight rubber cover
1.7 oz (50 g)
1.7 oz (50 g)
ARTICLE NUMBERs
4 MOA
11830
2 MOA
11972
11403
10336
11408
11405
10338
11416
10583
x
x
2
x
x
x
x
x
80 000
500 000
x
7 NVD & 9 DL of
which one extra bright
x
x
x
x
2” at 100 yds
50 mm at 100 m
Optional MGM mount
x
3 ft. (1 m)
x
6.9” (175 mm)
3.3” x 3.2””
(84 x 81 mm)
3.3” x 4.9”
(84 x 124 mm)
25.4oz (720g)
11402
11421
11704
* MOA (minute of angle) 1 MOA = 30 mm at 100 meters = 1* at 100 yards ** Dimensions and weights for CompM2, ML2, ML2 2X, M3, ML3 are given with flip-up lens covers *** at room temperature
● primary use ◦ secondary use - not recommended x applies for
36
Military Law Enforcement
37
Military Law Enforcement