VANEX Series Vandal Resistant LED Exit Signs

Transcription

VANEX Series Vandal Resistant LED Exit Signs
JOB NAME:
TYPE NO.:
CATALOG NO.:
End Mount
VANEX Series Vandal Resistant
LED Exit Signs
ORDERING INFORMATION
Catalog Number: Example: BNVXLED2FTRWBWL
MODEL
NUMBER
Surface Mount
VXLED -AC-Only
BPVXLED -Emergency,
Lead Calcium
Battery
BNVXLED -Emergency,
NiCad Battery
NUMBER
OF FACES
1F - Single Face
2F - Double Face
MOUNT
TYPE
W- Wall
T - Ceiling
E - End
LETTER
COLOR
RW - Red
GW- Green
HOUSING
COLOR OPTIONS
Blank- White
B - Black
see below
Ceiling Mount
OPTIONS (1)(2)
220 220V, 50Hz. Input
DL Damp Location Operation
WL Wet Location Operation
DW Downlight Apertures
TCI1 Two Circuit Input - 120V
TCI2 Two Circuit Input - 277V
SX Self-diagnostic Operation (3)
IA Audible Intermittent Alarm (3)
IV
Visual Intermittent Alarm (3)
FA Fire Alarm Panel Interface
Wall Mount
(1) Other options available.
(2) Some options may impact UL listing.
(3) For use with emergency models only.
SPECIFICATIONS
Housing: Clear polycarbonate wraparound cover over 18-gauge steel housing Construction finished in white baked-on powder paint providing scratch and corrosion
resistance.
Mounting:Wall and ceiling mounted exits are designed for installation to wall
surfaces by means of four 5/16” mounting holes provided in the enclosure.
Installation
End mount models are provided with a wall bracket into which the exit installs.
Wiring: Knockouts are provided on both sides of the enclosure
Letter Size: 6” letters with 3/4” stroke
Exit Face
Directional Indicators: Removable chevron arrows sized to meet UL visibility requirements.
Normal AC and emergency exit face illumination is provided by a special high
Illumination intensity red or green LED panel. Letter brightness and illumination uniformity
exceed UL requirements.
• Dual input 120/277VAC, 60 Hz
• AC Lockout protection
Electronics
• AC-On indicator light and test switch • Low voltage battery disconnect
• Automatic charger and transfer circuit Power
Normal Input Power: 4.8W (max) Regardless of AC input voltage.
Consumption Emergency models will draw up to 15W (max.) during charge cycles.
Sealed lead calcium long life or nickel cadmium longest life maintenance free
battery depending on model.
Battery
Optimum operating temperature range: 32ºF to 104ºF (0ºC to 40ºC).
Provides a minimum of 90 minutes of full output emergency illumination
Code Emergency models are UL924 listed. Meets NFPA Life Safety Code 101.
Compliance Complies with NEC and OSHA.
Limited 3-year warranty. 3-year sealed lead calcium or 5-year sealed nickel
Warranty
cadmium pro-rata battery warranty
Specifications are subject to change without notice. Consult website for latest version of this spec sheet.
Crescent/Stonco • 200 Franklin Square Drive • Somerset, NJ 08873 •
Crescent is a Philips company
• www.crescentlighting.com
PRODUCT FEATURES
All Models
•Rugged wraparound polycarbonate housing
•Corrosion resistant construction
•Recessed tamper proof hardware standard
•AC-Only and emergency models
•Wall, ceiling and end mount models
•Universal directional knockout chevrons
•White housing standard, black optional
•High output, long life LED lamps
•Red or green exit letters
•Optional damp and wet location models
Emergency Models
• Universal 120/277VAC field selectable input
• 90 minutes of emergency lighting
• Solid-state charging and switching circuits
• Choice of sealed maintenance free lead calcium or nickel
cadmium battery
• Low voltage disconnect protects battery
• AC Lockout feature reduces installation time
• Momentary test switch
• Optional self-diagnostic operation
• UL operating range 32ºF to 104ºF (0ºC to 40ºC)
• Meets NFPA Life Safety Code 101, NEC and OSHA
• UL924 listed
DIMENSIONS
Wall Mount Models
12”
30.5cm
10”
25.4cm
31/2”
9.2cm
71/8” Ceiling Mount
18.1cm
Models
12”
30.5cm
101/4”
End Mount
135/8”
Models
34.6cm
26cm
45/8”
17.7cm
101/4”
26cm
NOTE: Dimensions and specifications subject to change without notice.
Form 1151A 04/12 © 2006 Philips group