ALKCO F1.2 EXIT/DIRECTIONAL EDGE-GLoe EXIT

Transcription

ALKCO F1.2 EXIT/DIRECTIONAL EDGE-GLoe EXIT
-- --h_________.__.___________.___._.___._
F1.2
EXIT/DIRECTIONAL
EDGE-GLoe EXIT
FLUORESCENT
RGLO/SGLO-FL
SERIES
ALKCO
Suspended ceiling installation system
· Attractive chamfered acrylic panel with floating
letters
· Bottom edge panels reflectorized to facilitate
even illumination.
· Proprietary AlkcoLoc hanger bars lock onto
T-bar without additional hardware.
Wiring access door
Loc bar hangers
· recessed sign installs under 5 minutes.
· Meets UL924, NEC, OSHA and NFPA Life
Safety Code illumination requirements.
· A practical energy efficient, low maintenance
exit sign...the ultimate "less is more" design
statement from the originator of edge-lighted
exit signs.
EXIT.
8 Watt Fluorescent lamps
ALKCO
Clear background!
green letters
.
A DMsion of JJI Ughting Group, Inc. Toll Free: 1 866-50ALKCO or visit www.alkco.com
---
EXIT/DIRECTIONAL
F1.2
ALKCO
EDGE-GLOIDEXIT
FLUORESCENT
RGLO/SGLO-FL SERIES
TYPE
OPTIONAL
RECESSED
WALL
MOUNT
SURFACE HOUSING
RECESSED HOUSING
PANEL
PANEL/FACE
PLATES
SPECIRCAT10NS
HOUSINGIINSTALLAT10N
ELECTRICALA.AMPS
Recessedhousings: 20 gauge
One or two 8 watt pre-heat
galvanized steel with wiring
normal power factor ballasts.
access plate to allow electrical
On two lamp models, lamps
connection without removal of
are individually ballasted to
wireway. Standard housing is
allow one lamp to be wired to
suitable for use in plenum ceilings. a separate emergency circuit.
Vertically adjustable hanger
1 or 2 F8T5 lamps are supplied
bracket with proprietary Alkco-Loc installed in fixtures. 120V is
bar hangers lock onto T-bar or can standard, 277V optional.
be supported from building
Emergency Battery Back-up
structure. Bar hangers rotate 90 o. Provides 2 hours of illumination
Surface housings: 20 gauge cold
in event of power failure.
rolled steel with universal mounting Standard features include:
capability. KO pattern in top and
120V/277V dual-tap, Solid state
end accommodates standard
temperature compensating
1-device outlet box cover for
variable float charger; long-life
installation without a canopy. Top, sealed lead-acid battery; lineend and back KO pattern allows
latched low voltage disconmounting with supplied canopyl
nect; voltage sensitive
mounting plate over 4" octagonal brownout circuit and AC lockoutlet boxes. Standard finish is
out. Battery carries 3-year
white polyester resin powder coat. replacement/7-year
pro-rata
warranty.
PANELFACEPLATES
Injection molded clear acrylic
panels with chamfered edges.
Bottom edge is hot-stamped with
a silverized reflector for uniform
illumination. Message is reverse silk
screened onto panels. Panels are
pre-installed into a die-formed 18
gauge cold rolled steel face plate
which attaches to housing with
torsion springs. There are no
exposed fasteners on faceplate.
Standard faceplate finish is white
polyester-resin powder coat.
ELECTRICALDATA
# of lamps
Input Watts
120V
277V
Max. Amps
120V
277V
Power Factor
120V
277V
ALKCO
.
1
9.3
13.5
.14
.15
.57
.32
11500 Melrose Avenue
Labels/Compliance
UUCUL924,IBEW. Complies
with NEC, OSHA and NFPA101
Life Safety Code illumination
requirements. Red on white
signs with Chicago code
arrows are approved by
Chicago Fire Department
and Chicago Department
of Buildings.
AC
2
18.5
27
.27
.30
.60
.33
ORDERINGINFORMATION
Catalog #
Description
RECESSED FLUORESCENT HOUSINGS
RGLO-FL1
1-lamp,AC onIV
RGLO-FL2
2-lamps, AC only
RGLO-FLX1
1-lamp wI battery
RGLO-FLX2
2-lamps wI battery
W
D
161/4"
161/4"
161/4"
161/4"
3"
3"
3"
3"
3 1/2"
3 1/2"
5 1/2"
5 1/2"
SURFACEFLUORESCENT
HOUSINGS
171/8"
4"
SGLO-FL1
1-lamp, AC only
17 1/8"
4"
SGLO-FL2
2-lamps, AC only
4"
171/8"
SGLO-FLX1
1-lamp wI battery
171/8"
4"
SGLO-FLX2
2-lamps wI battery
HOUSING OPTIONS
1277
277 volt ( AC signs only; battery signs are 120/277V
dual-tap)
12C
Dual circuit relay (AC only signs)
IBSC
Black stem & canopy for surface housing
IWSC
White stem & canopy for surface housing
3 3/4"
3 3/4"
5 1/2"
5 1/2"
PANELIFACEPLATE
ASSEMBLY(orderingexample:PGL01-RWS-R)
#of
Panels
-Chevrons
PGL01
-R (chevron right)
PGL02
-L (chevron Left)
-D
(double chevron)
-LR (universal left
& right for doublesided signs)
ForChicago
Code
stylepanels
300
arrows,
addan.A"toabove
designations
onRWSpanels.
Example:
ARforarrowright.
NOTE:
Panel
heightincreases
to9"
ACIDC
1
2
12 20.8 (float mode)
12 20
.18 .29
(hi-charge)
.07 .11
.57 .59
.63 .66
Franklin Park,lL 60131-8139
L
and/or surface housino
cataloo #
Phone(847)451-0700 FAX(847)451-7512 . FormF1.2 11/05
---
--
--....