AOL Email The email files are in an html format. The objective is to

AOL Email
The email files are in an html format. The objective is to save the file in html format.
This can be done as follows:
- Open the email message you want to save, as if you were reading it - Near the
top, at the bottom of the To: / From: section, click on "Details" to reveal the
header. (you could simply copy and paste this information also)
- Move mouse cursor to the top tool bar, click on "File"
- Move mouse cursor to "Save as..." and click.
- Identify which directory you would like to save the file in. This is done using the
normal save function of Windows. If you are not real comfortable with directories,
save the file in "Desktop". This will have the file icon visible on you regular desktop
screen and very easy to find later on.
- Provide a name of the file in the "file name" box.
- Select the "type" as "html" if possible. If your browser does not show "html" type,
just select the type as "All Files" and add ".html" to the file name generated in step
6, such as email.html. The "dot" before the html extension is important. The
objective of this step is to have the extension of the file as an "html" type file.
- Press "Save".
To forward the file to someone else (law enforcement, lawyer, ISP):
- Move cursor to the top tool bar and click on "Write"
- Insert the email address you want to forward the file to
- Type any info in the body of the message, if needed
- To add the html file you just generated in the above steps, click on "Attachments"
- When the "Attachments Window" opens, click on "Attach"
- Find the file in the directory window and highlight the file name. If you followed the
"Desktop" instructions, the directory name is "c:\desktop". If there are too many files
that appear, type "*.html" in the file name. The use of the asterisk (also called a star
by some) lists all files that are html.
- Click on "open"
- Click on "OK"
- Click on "Send now"
- The message and attached file have now been sent.
- Please be aware that AOL only keeps messages in your INBOX for two weeks,
unless you save it as NEW or save it in a separate folder in your AOL directory on
your computer. Additionally, a screen name of TOSEMAIL1 has been identified as a
source of help for unacceptable email in the AOL system. Just enter tosemail1 in the
"send to" screen. If you are outside of the AOL environment, the address is
[email protected].
Compuserve
The default option is that full headers appear at the BOTTOM of each received message.
Eudora Pro
When reading an email message, look at the toolbar just above the message itself.
There should be a button that reads
BLAH
BLAH
BLAH
in black and white. Click on this and the full headers will appear. Then select all,
copy and paste into a new message to send to the offender's ISP, or click on the
forward button and the full headers will automatically be placed in the new email
message.
Excite
Webmail
- View the message
- Use the "save to disk" option
- Open the message's text file with your favorite text editor (notepad)
- Copy the message from the text editor
Free
Agent/Agent
Click on MESSAGE, then "Show Full Headers." Go to the message, click inside the
message pane, COPY, then PASTE to a text file or forward the message to
yourself or to the appropriate ISP.
GMAIL:
Open an email. On the right hand part of the email you will see a small down arrow.
Click that arrow and a drop down box will appear like this:
Click on the Show Original button in the drop down box and a new window will open
with the headers in that new window. Copy and paste all the headers into a new email.
Hotmail
- Go to Options
- Go to Preferences
- Scroll down to Headers, then click on Advanced Headers
Hotmail Old
1) Look in upper right side of screen, find link OPTIONS, click on that.
2) Find link “Mail Display Settings” click on that link.
3) Find Message Headers section and click on Advanced. The screen will look like this:
Click OK at the bottom to save your changes and then go back to the message you want
traced
and you will see all the headers needed to trace it.
Copy/paste all of the headers and message into another email.
Once that is done, you can forward the original message AS AN ATTACHMENT to
another
email as well, that way I’ve got each email it two formats.
Hotmail’s Live
Mail (new
version)
In the message list pane (top pane) highlight a message and then right click on that
highlighted
portion. Scroll down to View Source and click View Source. A new window will open with
the
full message headers in it. Copy all contents of this window. Return to Hotmail and click
on
FORWARD to forward the original message. Paste the contents of the Header window at
the
top of the message text portion of the forwarded message so that we have the full headers
at
the top of any text. If the default setting is to forward as an attachment, then simply paste
the
full headers text into the email text box that will be sent to us with the attached original
email.
Alternatively, you can open the message and then look for the tiny down arrow to the far
right of
the message, as pictured here:
Click on that down arrow will produce the drop down box viewed here. Look towards the
bottom
and you will see “View Message Source.” Click that and the same header box as in the
method
above will appear and you may then copy and paste those headers into a new message for
your
investigator to trace.
iMail (MAC)
Open your email client and select “View” and then “Message”. Select “Long Headers” Cut
and pastel the entire contents of the window that displays.
IN.com
Open a message. On the right of the screen you will see a drop down menu/arrow that is
titled “more details”.
Click on “more details and now you will see a link titled “Show Headers”. Click this link.
A new window will open with your message headers in this window. Now you can
copy/paste those headers where you wish.
INBOX.com
email
accounts:
Open a message and look to the far right of the screen. You will see a link to “show
details.”
Click this link and you will now see the following:
Now click the link that says, “show raw source (in new window)”.
A new box will open and you will see the following:
You can now copy and paste this information where needed.
Juno Version
4+
On the drop down menu "Options", choose "Email Options.." (press ctrl-E) Under
"Show Message Headers", select the "full" option. Click the OK button to save the
setting.
Juno version 4+ can display MIME and HTML email, but does not provide a way of
Viewing the HTML Source for the message within Juno.
To get the full source, including HTML codes:
- In the Juno mail client, click "file" and then "Save Message as Text File.." (ctrl-T).
- Give the file a name which you will remember (many people save temporary files to
the desktop).
- Double-click on the resulting file.
Lotus Notes
4.6 (Win 9x
client)
- Open the properties box on the message (in the default installation of the Notes
Client, it will be the first smart icon on the left, but you can also right-click on the
document and choose properties from that menu)
- Choose the second tab on the properties box, which is a list of fields and their
contents
- Scroll down to the field "$additionalheaders."
- Select the contents of the field and hit Ctrl+C to copy them to your clipboard
- Open a new email message, put your cursor in the body of the message, and hit
Ctrl+V to paste the headers there
- If Notes will not permit you to select the contents of the field, you'll have to
manually copy them to a new message - please be very careful in doing so.
Lotus Notes
- Open the email. Then go up to the tool bar and click VIEW, scroll to
8.5
SHOW and then PAGE SOURCE.
- In the old version it was under View > Show > Message source. It is
now under View > Show > Page Source. "Page Source" is only available for SMTP
(incoming "Internet") e-mail. It is not available from one Notes user to another or for
system generated e-mails like Delivery Failure Notifications. You will also need to make
sure that View -> Advanced Menus is checked.
Microsoft
Exchange
Open the message in Exchange to view it. Choose "File," then "Properties," then
"Internet." The header will be visible and will be highlighted. Simply right click and
copy it. Then paste on the front of the message and forward it.
Microsoft
Internet
Explorer
- Choose "Properties" under "File". Click on the "Details" tab. This will show the full
header.
- Now right click and choose "Select All". Right click again and choose "Copy". Start
a new message, right click again, and choose "Paste". This will paste the entire
header into this new (and temporary) message. Copy the header from the new
message and paste it back onto the original. The paste command doesn't work
directly on the original message. This isn't elegant, but it seems to work.
Microsoft
Internet News
For those people who use Microsoft's Internet News, simply (while viewing the
message) click on File, Properties, then click on the Details tab. Sending
complaints to [email protected] will also work. Some other addresses are
support@, webmaster@, and newsmaster@
Microsoft
Outlook 98,
Outlook 2000,
Outlook 2003
Open the message and select View, then Options from the drop-down menus.
Near the bottom of the screen you'll see a section titled INTERNET HEADERS.
You can copy the headers and paste them into an email elsewhere to get them to
the proper people.
Microsoft
Outlook 2007
Double click on the email message so that it is open in its own window. Outlook
2007 and 2010 uses a watered-down version of Word as the email editor and with
it comes the new ribbon user interface. Thus, the "Options" feature is no longer
under "View", as with previous versions of Outlook, and takes some hunting to find
it, but it is there. It is on the "Message" tab, in the "Options" block, which is the
fourth block over. To the right of "Options", there is a little button with an arrow in
it. Click on it and you have the message options menu with the internet headers in
the bottom section. Select this information and copy/paste it as needed.
Microsoft
Outlook 2010
Outlook 2010 is a bit complicated. The easiest way is to bring back the view source icon to
the ribbon. First you need to right click on in the ribbon and choose Customize the
Ribbon.
In order to add a new button to the ribbon, a new group needs to be created. It is
probably
best to expand the Home (Mail) Tab, select the last option which was “Find” in my case
and
then click the New Group button. Rename the Group and ensure it is selected. Then
select
“All Commands” under “Choose commands from:”, scroll down and select “Message
Options…” and then click Add.
Click Ok back to outlook and you will now be able to select an email, click on the new
button in the menu and view the headers.
Microsoft
Outlook
Express 5
There's an even easier solution to expanding Microsoft's Outlook Express 5 headers so
that you can copy and paste it to another window:
- Right click on the message and select Properties.
- Choose the Details tab and select the Message Source Button.
- Select All (CTRL + A) and Copy (CTRL + C).
- Close the Message Source window and the Properties window.
- Select New Mail and position your cursor in the body of the email.
- Paste (CTRL + V) the copied information.
Send the email to the analyst.
Additional Method
Here's a tip to simplify the process of getting full headers when using Outlook
Express 5 and Windows 98 (don't know about other versions of OE)
- Instead of selecting the message, right-clicking properties, clicking details, then
message source, simply select the message and press Ctrl-F3. Then press Ctrl-A
followed by Ctrl-C. (Ctrl-F3 takes care of all the steps necessary to get to the full
header. Ctrl-A selects all the text and Ctrl-C copies it to the clipboard.)
Now start a new message or just forward the original message (which takes less
time than opening a new one) to the originating ISP.
Microsoft
Windows Mail
In Vista, Windows Mail replaced Outlook Express.
1. In the list of messages, right-click the message you want to forward and
for Vista
select Properties.
2. In the Properties window, select the Details tab.
3. Right-click anywhere in the "Internet headers" field and click Select All or
simply hit Ctrl and A at the same time.
4. Right-click again and click Copy or Ctrl +C
5. Close the Properties window.
6. With the e-mail that you want to forward still selected, click the Forward
button.
7. Paste the copied information at the beginning of the message. Hit Paste or
Ctrl + V.
Mozilla
Thunderbird
To read the email headers in the Mozilla Thunderbird email client, simply open the
email. On the menu bar, go to View | Headers and select "All". The headers are
immediately displayed.
Netscape
Messenger
To read the email header in Netscape Messenger (the email reader supplied with
Netscape communicator) press Ctrl-U. A new window will open with the full
message including the complete header. To copy this to a email message press
Ctrl-A to highlight the entire message then Ctrl-C to copy it. Open the email
message you want to send. Using the mouse, place the cursor in the body of the
message, select edit / paste as quoted, from the menu bar.
Netscape
News
Simply click View-> document source when you're looking at the offending item.
The full headers are then visible.
Newswatcher
If you want the full headers on Newswatcher, go to File, choose Preferences, and
check the Show Article Headers box.
Operamail
Choose Options and enable [x] Show Message Headers in Body of Message
Pegasus
In Pegasus, just hit Ctrl-H (or the backspace key) while reading a message. You
will see the full headers.
Do this *before* hitting "F" (for Forward), and the full headers will be forwarded,
too.
Pine
You must configure Pine to allow showing message headers. You may skip steps
1-3 below if you have performed this configuration.
>From the main Pine menu, type S for Setup, then C for Config.
Use the space bar and down arrow to scroll until you reach the option [ ] enablefullheader-cmd, then type X in the box to toggle the option on.
Type E to exit Config, and Y to save changes.
The next time you read a message, type H and the full headers will be displayed at
the top of the message. Type H again to hide the headers.
Unix
I think I've figured out one way of of getting the full headers on Unix. We received a
spam and the message had just the usual "from," "to," "date," "subject" headers.
But when I saved the message in a directory, then used the "type" command or
printed it out, full headers magically appeared, showing where they were really
posting from.
Another Tip:
Some more header info for some Unix mail programs.
Nearly nobody uses mail and mailx any more, but they're available on almost all
UNIX systems, so let's start with those. You can exit your current mail program
without changing the mailbox and then look at the mail message using mail or
mailx.
Showing a mail message with the Print or P command displays all of the header
lines. Note capital P -- it's important.
Saving the current mail message with the saveretain command saves all of the
header lines. (On some systems, Save or S -- note the capitals! -- does this too).
There are lots of other mail readers; the one I use is ELM. In ELM, you display the
headers for the current message with the H command.
WebTV
While viewing the email, hit "Forward" on the sidebar. Address the document to
yourself. Completely erase the subject line.
Put your cursor on the first line of the "body" (text area); Hit "Return" (enter) twice.
Your cursor should now be on the 3rd line of the text area.
Type any "Alt" character on this line; DO NOT HIT "RETURN"
Cut and Paste the "Alt" character onto the subject line: (CMD+"A"), (CMD+"X"),
(CMD +"V") The "Alt" character should "jump" down to the message text-area.
Hit "Send"; open the received mail.
Yahoo Classic:
1) In the upper right hand section of your Yahoo email, once you log in, you'll see the link
to
OPTIONS. Click OPTIONS.
2) Now you'll see a screen that has email options on it. Select the link to GENERAL
PREFERENCES, Click that.
3) Scroll down to the MESSAGES section and you'll see a sub-heading of HEADERS.
4) It will look like this:
Yahoo New
Mail
Make sure the button next to Show ALL headers on incoming messages, is clicked.
Save your changes at the bottom of the page and then go back to the inbox message and
all
headers will now be visible.
Highlight all of that, the entire page with your cursor, copy and paste it into another
email.
When you open your Yahoo account, by default you see a view that has two panes, an
upper
and a lower pane, as seen below:
In order to view the full headers from within Yahoo, make sure the upper pane has the
target
message highlighted, as in the image above and then right click on that highlighted
portion with
your mouse.
You will see the following menu appear as a pop up:
Now, look down the menu until you see the View Full Headers command, which you can
see
below:
Click on that command and the following box will appear:
Now all you have to do is put your cursor into the box, select and copy all that coding into
a new
email and send that to the investigator you’ve hired to trace the email. Please send the
original
email as well, under separate cover, because there are sometimes clues in the email itself.