A/C/C - compumachine

A/C/C
@(~JU'n®©
Precision Column Type Surface Grinding Machines
The ACC Series is available with three control options to meet specific grinding
applications. Choose from Automatic, MOl Control (Manual Data Input) or full 2-axis
simultaneous CNC in a wide range of capacities. In all, there are
45 models.
Whether the application is small lot, high-precision parts, or rigorous high-volume
production, these rugged machines provide true precision, long-term reliability and
broad application flexibility.
ACC Column OX Series
ACC Column EX Series
ACC Column DXNC Series
• This fully automatic grinder uses
the DX Control that has a 35 year
record of proven performance.
Precise AC servo driven downfeed
with 0.00005" minimum increments
is displayed on the built-in digital
display.
• When grinding conditions change
and fast turn-over is important, the
EX Series delivers. This model has
fully controllable vertical and crossfeed through precise AC servo
drives. An overhead wheel dresser
provides automatic wheel
dress/dress compensation. A table
mount type wheel dresser is also
available.
• Precise, productive, easy to learn that's the DXNC Series. This
model features built-in grinding
cycles with powerful conversational
software. Single surface, multisurface (step, step with convex
shape, step with concave shape
and templates) for wheel forming
are standard. The standard 2-point
table mounted wheel dresser
affords increased tolerances by
establishing dresser point as
datum. When the application calls
for form grinding (G-code) and
contour grinding (G-code) choose
the optional 7-step swing type or
rotary type wheel dressers.
2
Machines
may be pictured with options.
Choose the model that's right for the job
Grinding Patterns
WORKPIECE
SERIES /
Crisscross,
E
urface
oning
cle
oning
SHAPE
for
for
PLUNGE
Grinding
Step
Infeed
Step
Infeed
Step Infeed,
Traverse,
Step
Infeed Crisscross
Conversation
Software
Conversation
Software
Conversation
Software
OXNC
OX
EX
SERIES
SERIES
Manual
NC Cycle
Positioning
NC Cycle
Manual
Manual
Operation
Step
Infeed, Traverse,
IInput
nput (Max.
PositioningNC
(PLC
MDllnput
Type)
Positioning
(CNC
(Full
Auto.
Type)
NC Cycle
I
Shift Plunge
Continuous
Infeed
ShiftContinuous
Plunge CutInfeed
~ntinuous
Feed
Method
999
Step)
26Step)
Step)
8
Workpiece surface smaller than grinding
wheel surface
PLUNGE
REGULAR
PITCH
U
.-ur-u•
I~
Vertical plunge depths and cross feed
positions are the same
PLUNGE
IRREGULAR
PITCH
V
,I-SS11111
'Ht
depths
cross
Vertical and
plunge
not
feedthe
positions
same are
r-~
SURFACE
'
,
,
,
"
,,
,
,
U
Workpiece surface is bigger than
grinding wheel surface
MUlTI-SURFACE
I
'
'
'JiJ 'i1J
I
I
I I
I I
:m'
::
I
I
I
I
I
:~
'n'
:++1::
ini
I
I
I
I
:
I
+-ij'
'n'
Vertical plunge depths and cross feed
positions are not the same
Grinding Cycles
CONTINUOUS
STEPINFEEO
Single Side
FEED
TRAVERSE
CRISSCROSS
SHIFT
PLUNGE
(Coarse
Grinding)
Step Width
Both Sides
~
Wheel In feed by both ends
of cross stroke.
Applicable for coarse grinding on
EX & DXNC Series machines.
3
Superior design and construction for the heaviest grinding applications
Okamoto Column Types design assures superior Rigidity, Accuracy and Reliability Work Envelope Access for simplified large work set-up and in-process inspection
Why Column Type Design is Better
The grinding wheel is part of the column assembly, both
move simultaneously. The table travels longitudinally on
the machine bed. Crossfeed is executed by column travel
so chuck/workpiece to operator distance remains
constant. The result is optimum operator convenience,
safety and operation.
Column assembly
and table frame
Outstanding infeed accuracy with high rigidity design
GRINDING
SPINDLE
Over 60 years of grinding machine experience go into
every grinder. Robust cast iron has the thickness and
strategically located ribbing to ensure maximum long-term
rigidity. The wheel head is fully supported by 6 slideways.
The column assembly incorporates a unique ventilation
port to evacuate hot air from the column interior resulting
in enhanced thermal stability.
Okamoto Column Type Surface Grinders are renowned
for their large and heavy workpiece capacities.
4
At no point during table reciprocation does the chuck
work zone overhang the machine frame. This eliminates
deflection due to weight stresses and assures consistent
accuracy throughout the full grinding stroke.
The combination of a V-F slideway and hydraulic cylinder
provides for stable table movement and speed even with
heavy workpieces or slow table speeds.
Precise heavy grinding conditions demand an
exceptional spindle .
.!
OPTION
STANDARD
The cartridge type ACC Column
3'
wheel spindle is designed to
deliver peak accuracy even under
the heaviest grinding demands.
A specially designed, precision
010.25'
balanced spindle motor drives
the spindle through a flexible
coupling that absorbs vibration
while transmitting full horsepower.
An impeller mounted on the motor
shaft expels heat away from the spindle out the column
vents. Bearings are sealed and lubed for life.
H
Reliable Hydraulic / Lubrication System
Optimum Thermal Stability means Optimum Accuracy.
Consistent, dependable lubrication is
the lifeblood of any machine. ACC
Column Grinders utilize a reliable
gravity feed system that provides
critical lubrication to all slideways and
positioning screws.
i
HEAT EXCHANGE
AUTO.TEMP.
CONTROL
UNIT
UNIT
(Option)
OX Series
EX Series
OXNC Series
The hydraulic units / temperature regulating systems are designed to be
positioned away from the grinding machine. This eliminates the transmission of
accuracy robbing heat and vibration to the machine.
AUTD.TEMP.
HYDURN~¥L1C
I I COll~rTOl
(EX: Dplion)
SADDLE
BED SlIOEWAY
ACC-DX Series:
Temperature regulator standard
ACC-EX Series:
Fan type radiator standard
Temperature regulator standard. Spindle housing
temperature controlled by hydraulic oil. If desired, a heat
exchange unit can be connected to grinder's coolant tank.
ACC-DXNC Series:
5
ACC-DX Series
.•
•
.;§\~~
-.
Okamoto
-'::¥
-~_.-'-'-
O·
•
ACC-DX Models deliver rugged performance, superb precision and long-term
dependability at an affordable price. They utilize Okamoto's exclusive MDI control
system that assures consistent precise infeed. Minimum increment is 0.000050".
Total stroke is also displayed. This easy-to-use control simplifies touch down and
minimizes air cut time.
Optimum Convenience
High Precision
Simple Operation
The DX Series lets today's
progressive machinists enjoy the
convenience, flexibility and safety of
Okamoto column type design. The
traveling column assures
unobstructed access to the work
envelope even with extra-large
workpieces. Parts loading/unloading
and in-process inspection is also
simplified. All handwheels, switches
and control buttons are conveniently
located on the front control panel. An
interlock system during the auto
cycle and protective covers for table
dogs and other machine components
promotes operator safety.
The best components make for the
best machine. The combination of a
high resolution AC servo motor and
tinE:lpitch ballscrew delivers
outstanding infeeds of 0.00005".
Okamoto's LSI Control System
allows operators to select infeeds
from 0.00005" to 0.002" through
simple switch operation.
Okamoto's E>X eentrol sy§!@m
simplifies the grinders fully automatic
cycle. Coarse grinding, Fine
Grinding, Spark-out and Table Stop
at Right are displayed on the
machine's digital display. Vertical
wheelhead position is also always
displayed.
6
Operation Panel
-'-.~
<on
~'-.:;~~~
on
..
-'0- U
.• II
I)
••
1\.0:'
o
010
o
•
-
o
••
<Jo<5o
6
•. !.
o
o
Table Longitudinal FeedHandwheel
II!]
If)
Crossfeed Reversing Limit Selector
m Table Right End Stop Pushbutton
m
Grinding Mode Selector Switch
Crossfeed Handwheel
m
Grinding Mode Selector Switch
Coarse Grinding Infeed Selector Switch
Manual Pulse Generator for Vertical Feed
IS
Wheelhead Rapid Traverse Switch
m
m
Crossfeed Direction Control Switch
m
Rapid/Jog Infeed Switch
Crossfeed Speed Adjusting Lever
1m Vertical Positioning Display (during auto
m
Fine Grinding Infeed Selector Switch
EI
II
II
II
II
II
1m Reset Switch
Table Start Right Pushbutton
mode: Stock removal amount display)
Wheel Dressing Speed Adjusting Knob
and Direction Change Lever
Fine Grinding Stock Removal Set up
Switch
m Spark-out Counter Switch (0 - 5 times)
1m Reset Switch
Ii
Table Speed Adjusting Lever
Crossfeed Positioning Display (Option)
I!J Table Start Left Pushbutton
WORKPIECE SURFACE
(GRINDING STARTING POINT)
W
'0
COARSE
INFEEO AMOUNT
INTERRUPT BY MPG
tOARSElsTOCK
REMOVALl4MOUNT
COARSE GRINDING
COARSE STOCK
REMOVAL
AMOUNT
FINE GRINDING
-
II
Manual Pulse Generator
All Column OX models are equipped
with a Vertical Feed Manual Pulse
Generator as standard. This gives
the operator necessary
mobility for
wheelhead
positioning
during set-up.
Fine feed increments
of 0.00005"
and 0.005" per handwheel
revolution
enables precise wheel to work
positioning.
If desired, an optional
vertical feed handwheel
is available
on all models.
t!l.
-I
~
m
FINE STOCK
REMOVAL
AMOUNT
/
Grinding Mode Select Switch
f!)~ARKOUT
Self Diagnostic Function
Traverse: Oownfeed signal at the
end of each Crossfeed
reversal
Simply press "DGN" key LED aided
troubleshooting.
Plunge 1: Oownfeed signal
end of the table stroke
at right
Stock Removal Set-Up
Plunge 2: Oownfeed signal
ends of the table stroke
at both
Total stock removal amount is input
and displayed through simple key
input. The Fine Grinding Stock
Amount Selector Switch enables the
operator to switch between Coarse
and Fine grinding input modes.
7
ACC-EX MOl Series
ACC-EX Models provide all the performance, precision and dependability of the
OX Series plus a new degree in convenience. Their easy-to-use Manual Data Input
(MOl) control system simplifies set-up, change-over and boosts productivity.
EX Series Column Grinders use
Okamoto's "user-friendly" grinding
software. This proven software
simplifies all phases of the grinding
operation while giving the operator
the "feel" of conventional machine
operation. This simple "teach
function" simplifies vertical sizing
position, crossfeed point and
dressing position. Vertical and
Cross movement, Automatic
Downfeed (Traverse or Plunge) are
programmable in 17 increments from
0.0" to 0.005". The minimum
Crossfeed increment is 0.00005".
All EX models are equipped
Wheel Dressers
with Overhead
as standard.
Grinding
DRS
Condition
DATA
R-~j)RS
Set-up Screen
LIST
INTVL
1. 0000
0. 0200
AMT
H·DRS INFEED
AMT
ME D NO. 01' DRS
R-DRS SPD
F
IJI{S
F-DRS
INTVL
INEEED
I~ -OHS SPD
NO.
OF DEAD
1
5~0.
0.
0.
2.00.
1
2.
AMl
AMT
PASS
****
pas
Dressing
.-
~
8
*** ***
)(GRIND)(
3000
0100
0000
2323
50. 0000
DRS POS SET
WHL WIDTH
DRS INFLLD SEL. 02
NQ
OF ROTARY-DRS
UMJOG
~000
o
o
11,10:3"1
)(
Data Set-up Screen
t
)( DONE
nfeed
ed
Various Automatic
Grinding Cycles
• Work / Chuck Datum Position
This data page displays the exact
position of the workpiece in
relation to the grinding wheel.
Choose either Work Datum or
Chuck Datum for workpiece sizing
references.
Operation Panel Easy operation with Conventional
feeling
• Shift Plunge Grinding Mode
Shift plunge cycle allows for coarse
grinding to be conducted in a
plunge mode and the fine grinding
to be done in a continuous grinding
mode. This cycle saves 20 - 40%
over conventional cycles with the
same resulting surface finish.
• Simple Dress Invalid Cycle
With a simple flip of the dressing
switch the machine will ignore all
dressing data and no dressing during
cycle takes place. When used with
the Work Datum the EX can work
like a conventional grinding machine.
This is highly effective for simple
one-off grinding jobs.
Automatic
Fully Automatic
Grinding Cycle
Grinding Cycle
Automatic Grinding Cycles, Traverse, Plunge, Shift Plunge,
Dress & Dress Compensation Cycles, Automatic Grinding
Wheel Retract. An over-the-wheel head type dresser is
standard and can be set for both coarse and fine dress
amounts, speeds and intervals independently.
Table Mount type dresser is optional, and the dressing cycle
between table dresser and over-the-head dresser is
synchronized to automatically compensate and transfer
wheel diameter to each unit for size compensation.
I
Traverse Grinding I
Coarse
Step-Both
Step-One
Plunge-Both
Plunge-One
Side
Sides
Side
Side
Infeed
Infeed
Infeed
Crisscross
(Bias)
Infeed
Shift-Plunge
Step-Both
Sides
Infeed
Step-One Side Infeed
Plunge
BothGrinding
Sides
Infeed
Grinding
Mode
Crisscross
(Bias)
Infeed
Step-Both
Sides
Infeed
Step-Both
Sides
Infeed
Fine Grinding
Grinding
Plunge-Both
Sides
Infeed
lOatum
Step-OM Side
Infeed
Crisscross
(Bias)
Infeed
Teaching Function for Easy Set up
Grinding wheel cross positions, grinding wheel sizing
position and dress position can all be set with a simple
push of the teaching button.
Dress on Demand in Cycle
Work Datum, Shift Plunge + Traverse)
Cycle Chart (Example:
--~
Initial Dress (Rough
"
Datum Point
Dress Compensation
Dress)
"",h Gri'''',
\ "
/
'-'1_
L--
Dress
TOlalltock
"ou,h
Gri'''',
StockRemova
Rem val
Comllensatlon
..
"",h
L
I •
If
Interval Amounl _
I
A
/
~Dress
L.r
I
Backlash Compensation
Me",Ie Dress(Rough Dress)
/
L
_____
FloeDressi',
I
/
n,.
n
~
.
FioeDress'"
O~
/
//
I
S,arkDut
Fine Grinding Step Feed or
I
It
I
_
-1_
J
"Ou1TtghGrir~in~(s:(~:ungec~t)
0
id ~elraclion
all
/
I
The following can be changed during cycle:
Coarse Grinding Amount, Fine Grinding Amount, Spark-Out Time,
Fine Dress Number, Retract YES/NO, Crossfeed Step Amount,
Switch to Bias Feed, Step Amount or Bias Speed, Plunge-One
Side, Plunge Both Side Switchover, Crossfeed reversing Position
//
~ / /
/
--,.
~~
Manuallnlerrupllon
Sizing' Point .•
/- _
/
I"
Dress Compensation
"-
L,
0
or
/ / \.. _ /
G,m'm,
The same as conventional machine, Dress compensation is
standard, and a convenient dress interrupt feature also
allows for "Dress on Demand".
I
Bias Feed (Zigzag
Feed)
9
ACC-DXNC Series
r
Various Dressing Units
Wheel Forming Tracks
The Single Point Dresser Unit (located
table left side) uses Column Crossfeed
and Grinding Wheel vertical movement
to generate flat dress or multi-flat
grinding.
Table Mount Single Point Dresser
Unit
The 3-Point Dresser unit (located table
left side) has a top and 2 side-mounted
diamonds needed to prepare Angle
Dress, Side Dress or Radius Wheel Forms .
• For Angle Dress (45 deg. divide)
For use wheel 00 dress, Angle
Dress (V-shape) form
• For Side Dress (90 deg. divide).
For use wheel 00 dress, single
side dress, both side dress form.
Table Mount 3-Point Dresser Unit.
-
z
Y
-:U
18.....
10
-&-~-
~~
Table Mount Hydraulic
10
Swing Dresser
Type
7 Step
zY
The Swing- Type Dresser Unit (located
table right side). Dresser arm can be
tilted +/- 30 deg., +/- 15 deg. and 0 deg.
(total 7-step) to avoid interference
between diamond tool and shoulder, and
make universal wheel forms with 2-axes
simultaneous control for Cross and
Vertical Infeed.
Easy operation
Minimum
with Operator Friendly Software
increment
High Efficiency
0.00001" for [Grinding
wheel Vertical & Crossfeed feed]
for Setting up time with 78/PM
High level of consistency
accuracy tolerances
196 IPM
for Vertical movement,
CNC takes on complicated
to assure high
for Cross movement.
Dress Interruption
procedures
• Easy input sizing or positioning .
Teaching function allows for easy
position inputs
• Vertical Feed Slideway for Low Friction
• Crossfeed Slideway (V-V)
• Dress button can be pushed at any
time during auto cycle. Upon dress
completion, cycle resumes at last
grinding datum postion .
• No position reference needed for start.
Eliminates useless aircuts or start
positions.
• Hydraulic Type Counter Balance
Cylinder
Coarse Grinding Cycle included as
standard
• Oil Cool Type Spindle Housing for
Thermal Control
I
SID!
fRf
(;~O
'1£lIL,
~T
<
I
CJ"::I:II-'''1::1;.:XM
I
•• "
• High Efficiency Shift Plunge grinding
mode for coarse plunge grinding to
fine traverse grinding incorporated in
one easy-to-use cycle
,
,,-IIr-~'- .n
User Friendly Conversational
,UJ
Software
I
U
during Auto Cycle
"<JT
i
~
\.10PK
C;up,.racr.:
(''¥JR
, ,Rr
Ei
:;:EF
co n
l
Q
iJ(lND
11 /HIN
1. 'fi fil S
L.r:RIr mi -f} 1M /HIH
1.t:tJORS. qPA: l(OOl
rlti;c~
~1lI,nw?
_1' -\CEtHUf1 ('~kR
'j.
~
I
IIH'
-m.l'r
]
1
OP
OP
B
5
$PARK-001 TI ""'S
T P..F
a
0
j
a
NUH=
REF
**u *** ***
I I 17:46:
16
I
u* "'u
EDIT "'***
117:31:99
1
I
]ECIJJ:TI
]EIIIJ::3J
Dressing
Grinding
Menu Selection
Menu
Grinding
Grinding
Selection
AIR.·(1-)
10=
b.',Il'1;
rU
fiRS:
.:EE>,
Dl'll:·n.;
HUERV
flillfitI'.;
C!lOf,~.J)k<);.,.l:t:)
TiMES
B
HO!11-l
t:~..;~
[
HJ:"'U
''''flU
H
),
(OPIIOH)
1ll1~
a.aaoo
o.ooao
C-CRlfS~C-CROS
ao
aaaaaa
D-a.oaoo
0o.
aa.a
0.00
a.oooo
o.aa
' 'a.a
ilf
ooaa
aaooa
aoaa
aa. a.aa
O.oaoa
aaaa
O.aaao
O.aoaa
aa
,JAt
'111
[Pa.
a.aa
o.aaaa
C-CROS
f1mTn"fmIiErfll:":
o.
(;~<;'HII,l
'fIN
R
51a. aaaa
- sa. aaoo
o.aaaa
1
Re: E
AL~F. ;) (OPT'ON)
d)~SP'n2
11 ,
1. -Ul'tBLE ~)(OPf~OW)
,OPI- ~
(OP1~0t4)
I. SUI ,G
(OPT mn
ROHlRV' (OPT OH)
1
.pATH
•
+PATH
2
I$TH
,. L
0.??oo
a.oooe
a.aaaa
a
-
NUH=
HUM=
EDIT
u** *"'* *** I
EDIT ***'"
11?:29~511
on", u", I
117:30:49!
EDIT
*n ***
",-.,.**
I
Select
Return
t
Grinding
Wheel Data Input
Return
to Menu Screen
t
Grinding
DRF<x;
t
pOlin
]~
Datum
Position
t
Setup
WC
(Dresser Set-up or Select Dresser Unit)
and (Dressing Datum) Set-up.
2 .. AXIS
Y-AXIS
a. aaoo
a.ooaa
a.oaoa
CURD
Y -649.2058
2 -682.5344
Y -649.2a58
2 -682.5344
ti;
I
17 I
117'32'
FROM Uk' S~ ,~Olm
Y -649.2a58
Z -682.5344
Structure for Menu Screen
Menu-2 (Dress Menu Set-up)
Setup Screen
to Menu Screen
F!!fl11
Menu-1 (Dress Position Set-up)
Mode
I
EDIT ••••••••••
I
117:31:24
1EIIIJ::3J ]EIJ::IJ:3J 1a=ECE3J
Dresser
Data - A
Data - B
"":L ~st'.ON "}
~
a.ooaa
I (Select Wheel Form) (Data for Form) Set-up
~ 00111
IS
C' C-CROS
a.oaoo
a.ooao
a. aaaa
(Single Dress) Action
II C-CROS
F C-CROS
Menu-3 (Grinding Menu Set-up)
NUH:
User Friendly Conversational
~
MARK:
WORK
WORK
DATUM
DATUM
POSITION
EDIT
Software
POSITION
] I
Y
FlHI
HUI1=
>II
•••
",
*"'''' "'''''''
IMOS
Work Form Setup
WORK
DATUM
POSlTION
I
117:31:42!
EDIT
.• "'>II'"
>II"'*-
"'OIl'"
I
IAL-CLRls. P. T IpRE-scD
Setup
Completed
Data Input
11
Standard and Optional Accessories to meet any demand
Standard Accessories
INo
Weight
76
OpUonalAccessories
0EX
0&Tool
-OX
-Okamoto
- Type
00
0Tower
Hand
Held
Vertical
Cross
Okamoto
0Fanuc
Adapter
20
Items
HP
Wheel
Spindle
Motor
Grinding
Wheel
Controller
System
Automatic
Dress
Compensation
Type
Table
Hydraulic
Fan
Graphic
Wheel
Spindle
Leveling
Cooler
Lifting
Guard
Inverter
Bolts
Oil
Type
Cylinder
forSystem
Temperature
+
Conversational
Hydraulic
Over-the-Wheel
Magnet
Type
Plates
By
Stand
Hydraulic
OilController
Software
Base
Dresser
System
MOl
System
Necessary
Option
Mount
Tools
Type
&
Diamond
Box
Dresser
G-Code
Program
Capability
Signal
Splash
Cover
(3-Color
with
Coolant
Type)
Nozzle
& Tool
Pipe 0
Option
Cool
Type
Spindle
Housing
Iwith
OXNC
Balance
System
Coolant
System with Magnetic
Dust Separator
Coolant
System with Magnetic
Dust Separator
Coolant
Temperature
Electro Magnetic
Chuck
Chuck Controller
for Normal
Electro-Permanent
Chuck Controller
Electro-Magnetic
Magnetic
for Electro-Permanent
Type Electro Magnetic
Oil Cooling
Type Spindle
Magnetic
Stand with Arbor
Test Arbor
Grinding
Wheel Adapter
Grinding
Wheel Adapter
for Micro Balancer
Grinding
Wheel Adapter
for Dynamic
Micron
Balancer
Hydraulic
Wheel Spindle
Regulator
Motor
Spindle Attachment
Grinding
Balancer
System
all Temperature
Grinding
Vertical
Chuck
Chuck
Housing
Wheel Balancing
Balancing
Chuck
Chuck
Oil Cooling
Grinding
and Paper Filter System
Regulator
30 HP
(3 HP) with Dressing
Wheel Adapter for Vertical Spindle
Frequency
Inverter
Signal Light (3-Color
Device
Unit
for Wheel Spindle
Type)
Calendar Timer
Table Enclosure
Coolant System with Magnetic
Separator and Filter
Indexing
12
System
Dust
Grinding Wheel Balancing
with Arbor
Overhead
Wheel Dresser
Stand
Electro-magnetic
Micro Balancing
Chuck
Dynamic
Wheel Balancing
System
System
Vertical Spindle Attachment
with Dressing Device
(3hp)
Floor Plans I Weights
I
c
1
ACC OX SERIES
(Dimensions
1216
1216
213
1216
1263
185
1357
1
1346
1357
263
216 20·48
1263
1357
213
1263
in Inches)
94
11.81
374
15.75
19.09
16.93
125
100
13.1915.16
11.0212.99
9.8411.81
17.13
14.96
13.78
119 106
3346
7.87
86
28·60 120·120
128·80
32052 120·80
132060
120·60
I 124060
32080
132·120
24·48
1128·120
24080
124·120
WEIGHT (in Lbs)
116,540
ACC EX SERIES
117,640
(Dimensions
119,845
1 26,460
117,200
I 20,730
118,520
127,340
123.370
126,020
134,180
123,920
124,100
126,900
135,200
126,900
122,930
125,580
133,730
123,590
123,810
126,460
134,850
I 26,020
1 34,180
1 23,600
1 24,030
in Inches)
1216
213I 24·48
15.75
19.09
16.93
13.1915.16
1102
9.8411.81
17.13
14.96
13.78
12.99
162
138
156
143
1216
1263
120·60
1216
1346
1357
1357
185
213
I1346
263
216
1263
I1263
28·60
20·8020·48
128·80
20·120 124·120
32052
124·60
128·120
132060
1 24·80
7.87
86 132·120
13208033.07
11.81
94
3740
WEIGHT (in Lbs)
116,100
ACC OXNC SERIES
229
11I 231
263
231
358
211
358
263 20·48
263
229
2331
358
111I263
117,200
119,400
(Dimensions
I 26,020
116,760
118,100
1 20,300
in Inches)
32.67
132
16.92
15.74
13.1915.15
11.0213.58
9.8411.81
110
14.96
17.12
13.77
126
116
7.87
12511 24·80
1 20·60 19.09
1 20·80
24·48 1 20·120
28·60
I 124·60
28·80
28·1201
I
134
11.81
36.611 32·60
32052
24·120
132080
1 32·120
WEIGHT (in Lbs)
1 16,540
117,640
1 19,8451
26,450
117,200118,520
1 20,730
I 27,340
1 23,370
126,660
I 35,280
13
Specifications
MODEL
Unit
I
ACC-20'48
I
ACC-20'60
ACC-20'80
I ACC-20'120
ACC-24'48
ACC-24'60
CAPACITY
26
69
in.
20x47x4.320
79
118
59
79
47
x4.3
4.3
4.3
4.3
in.
Grinding 20
22
Capacity
x 48
57(980)
20
24
26
20
22
24
22
26
(W
xxxx60
xL)
80
89
120
128
60
89
57
59
xxxx4.3
Ibs
22
20
24
69
80
48
1,940
4,290
5,510
(2,450)
(1,170)
5,510
4,960
5,260
5,220
(1,230)
(1,330)
(1,330)
(1,640)
x LChuck)
x H)
(Incl.
(W xL)
27.3
23.5
GRINDING WHEEL
Dimensions
(D x W x B)
in.
Speed
20 x 3 x 8 (20 x 3 x 5 optional)
rpm
MOTORS
Grinding5 WheelI Spindle
I
MODEL
I
KVA
1.2 for ACC-EX Models
hp
5 7.5
0.2
16
0.004
-(xO.1)
0.001
- (x1)
3.3
0.20.
ACC-DX
1
N/A
61.2- -1.4
82 (x1)
Models
in.
Unit
in. 15 Steps
6
1.2
82Programmed
in./min.
0-5/ Fine: 101
0-5
N/A
ACC-EX
Models
N/A
Conversational
0.0004
/ 0.04
0.0001
0.001 (x10)
(x10)ft./min.
0.00001
0.00005
-(xO.1)
0.0025
/ 0.0001
(Coarse:
(x1)
Steps
/0.001
/ Fine:
(x10) 10Softwa
Steps)
01
/1.5
0.05
/Through
0.2
0.001
/ (x5)
0.010
(x1)
/0.100
(x10)
0.00005
- 0.00295
(Coarse:
0.0001
Steps)
(x1)
/0.0005
(x5)(x20)
/150.002
(x20)
Manuallnfeed
Intermittent
Hydraulic
Feed
Handfeed
Coarse Grinding
per
Revolution
Hydraulic
Feedrate
(Average)
1.:1
1.07
for ACC-DX
ACC-DX Models
Models
N/A 20
for
230/460V
ACC-24'80
I ACC-2a·60
~
I ACC-2a·aO
I ACC-2a·120
j ACC-32·52
ACC-32·60
j ACC-32·aO
I ACC-32·120
34
28
34xxxxx120
128
80
89
80
69
60
32
34
32
34
28
30
32
30
32
128
52
61
60
69
120
60
24 x 120
27.3
~
32
32
28
32
28
32
xxxx118
52
59
118
79
59
xxxxx4.3
4.3
4.3
4.3
4.3
4,820
(2,660)
5,400
5,510
5,510
(3,110)
(2,600)
(1,765)
6,170
5,840
5,640
5,290
(3,910)
(1,545)
(1,700)
(2,070)
24 x 118
x x4.3
0.78 x 3
20 x 3 x 8 (20 x 3 x 5 optional)
1,100 (60Hz)
20 (30 optional)
2.4 for ACC-DXNC Models
2.4 for ACC-DXNC Models
7.5
Specifications subject to change without notice.
ACC-DXNC Models
Programmed
Through
Conversational
Software
0.00001
Programmed
(xO.1)Through
/ 0.0001Conversational
(x1) / 0.001 (x10)
Software
1.2
0-5
1 - 3.3 (x1) /0.0005
0.0001
(x5) /0.002
(x20)
6 - 82 - 1.5 Handfeed
0.001
(xO.1)
/ 0.010 (x1) Software
/ 0.100 (x10)
0.004
per
Graduation
Programmed
Through
Conversational
-
15