Corrugating rolls ground in a day

INFO
November 2006
Corrugating rolls
Corrugating rolls ground in a day
• Grind an average corrugating roll from
solid core to finish in under 24 hours—
Thanks to multi-flute full-depth creep feed
grinding with continuous wheel dressing
• One machine covers all sizes—The Mägerle
MGC grinds all current and future rolls:
ß 5 to 25 inches in diameter
ß Face length up to 120 inches
ß Overall length up to 189 inches, journal to
journal
• Easy to setup and changeover—
The Mägerle MGC pictured here (and above) with a triple flute
C-profile wheel for stock removal of 3.7 mm (0.15") deep into
solid core at 800 mm/min (31"/min.) at full depth of cut
Over for more
www.grinding.com
• Easy to setup and changeover—
ß Fully automatic grinding sequences,
programmed the way you want
ß Height adjustable indexer
ß Compensating coolant nozzle
ß Retractable Marposs probe automates
roll alignment
ß Ergonomic design
• Compact—Uses the minimum necessary
floor space
• Quick installation—Ships in one piece
for quick installation. Machine’s net
weight approx. 32 tons
It may not fit in Santa’s sleigh, but the
Mägerle MGC ships in one problemsolving piece!
Overhead dresser keeps wheel
form constant, compensating
nozzle keeps grind cool
Height adjustable indexer
& fixed height steadyrest
for inboard support
Retractable Marposs probe
automates roll alignment
Ergonomic designs makes it
easy to setup and check the
roll
Recapping: • Grinds an average corrugating roll from
solid core to finish in under 24 hours
• Easy to setup and changeover
• Quick installation
UNITED GRINDING OHIO
MIAMISBURG, OH 45342
PH: 937-847-1221 • FAX: 937-859-1115
www.grinding.com
• One machine covers all sizes
• Compact
!
w
o
n
l
Cal
www.grinding.com