HIGH PERFORMANCE AND COST SAVINGS with

High Performance and Cost Savings with
CUTTING-OFF AND GRINDING Wheels
The GRINDING product line ‘Platinum’ is manufactured with high performing abrasive
grains, following the tradition for excellence of Saint-Gobain Abrasives. The combination
of the advanced resin bonds and valuable abrasive grains together with a modern
product formulation makes the GRINDING “Platinum” line the reference for Premium
cutting-off and grinding wheels. This product range has been specially developed to
satisfy the most demanding users.
GUIDE TO LABEL READING
A
GRINDING trademark
B
Application
C
Coloured stripe indicating the allowed speed =
80m/s
D
Wheel dimension
E
Safety pictograms
F
oSa safety certification
G
Technical specification
H
Article number
I
Barcode
J
Made in the European Union (product origin)
K
Maximum revolutions per minute and maximum operating speed
SAFETY AND APPLICATION SYMBOLS
Wear a
dust mask
Wear eye
protection
Wear
gloves
Wear ear
protection
Read the
instructions
Do not use
a damaged
wheel
Free of iron,
sulphur &
chlorine
Steel
Steel/ Inox
Inox
Cast Iron
High Quality Steel-Inox
Heavy INDUSTRY applications
Advantages:
Premium Zirconium grain
High cutting speed thanks to the quality level of abrasive grits and bonds
Longer life respect to the standard wheels
Special bond formulation reduces temperature while cutting
Minimum vibration, easy to use
Best quality/price ratio
TYPE
Dimensions
SPECIFICATION
M/S
ART No.
115x1,0x22,23 4 1/2 x 3/64 x 7/8
ZA60Z - BF41 PLATINUM
80
66252842355
115x1,3x22,23 4 1/2 x 1/5 0 x 7/8
ZA60Z - BF41 PLATINUM
80
66252842356
50
115x1,6x22,23 4 1/2 x 1/1 6 x 7/8
ZA46Z - BF41 PLATINUM
80
66252842357
50
125x1,0x22,23 5 x 3/64 x 7/8
ZA60Z - BF41 PLATINUM
80
66252842359
50
125x1,3x22,23 5 x 1/50 x 7/8
ZA60Z - BF41 PLATINUM
80
66252842360
50
125x1,6x22,23 5 x 1/16 x 7/8
ZA46Z - BF41 PLATINUM
80
66252842361
50
180x1,6x22,23 7 x 1/16 x 7/8
ZA46Z - BF41 PLATINUM
80
66252842362
25
230x1,9x22,23 9 x 5/64 x 7/8
ZA46Z - BF41 PLATINUM
80
66252842363
25
(mm)/“
100
95
75
25
5
0
TYPE 41
Grinding Package Icon
19 �a�
d�iernika 2011 09�5����
50
Ultra thin cutting-off wheels
Stainless steel industries
Advantages:
High cutting speed thanks to the quality level of abrasive grits and bonds
Longer life respect to the standard wheels
Iron, sulphur and chlorine free
Special bond formulation reduces temperature while cutting
Minimum vibration, easy to use
Best quality/price ratio
TYPE
Dimensions
SPECIFICATION
M/S
ART No.
115x1,0x22,23 4 1/2 x 3/64 x 7/8
A46V - BF41 PLATINUM
80
66252830923
115x1,6x22,23 4 1/2 x 1/1 6 x 7/8
A46V - BF41 PLATINUM
80
66252834834
50
125x1,0x22,23 5 x /64 x /8
A46V - BF41 PLATINUM
80
66252830925
50
125x1,6x22,23 5 x 1/16 x 7/8
A46V - BF41 PLATINUM
80
66252834835
50
150x1,0x22,23 6 x 3/64 x 7/8
A46V - BF41 PLATINUM
80
66252835465
25
150x1,6x22,23 6 x 1/16 x 7/8
A46V - BF41 PLATINUM
80
66252835467
25
180x1,6x22,23 7 x 1/16 x 7/8
A46V - BF41 PLATINUM
80
66252830926
25
230x1,9x22,23 9 x 5/64 x 7/8
A46V - BF41 PLATINUM
80
66252830927
25
(mm)/“
100
95
75
25
5
0
3
TYPE 41
7
Grinding Package Icon
19 �a�
d�iernika 2011 09�5����
50
CUTTING-OFF & GRINDING WITH THE SAME WHEEL
HEAVY METAL FABRICATION
Advantages:
Blend of zirconium oxide and aluminum oxide grains
Longer wheel life
Higher material removal rate compared to traditional grinding wheels
Specific wheel construction to cut and grind with the same wheel
No chipping on the edges
TYPE
Dimensions
(mm)/“
SPECIFICATION
M/S
ART No.
180x4,0x22,23
7 x 5/32 x 7/8
ZA24Q - BF27 PLATINUM
80
66252841174
230x4,0x22,23
9 x 5/32 x 7/8
ZA24Q - BF27 PLATINUM
80
66252840545
100
95
75
25
5
0
TYPE 27
Grinding Package Icon
19 �a�
d�iernika 2011 09�5����
20
20
GRINDING WHEELS SPECIAL
SHIPYARD FORMULATION
Advantages:
High performing aluminium oxide grains
Optimal material removal rate on edge grinding
No chipping
TYPE
Dimensions
SPECIFICATION
M/S
ART No.
115x6,4x22,23 4 /2 x /4 x /8
A24R - BF27 PLATINUM
80
66252838281
125x6,4x22,23 5 x 1/4 x 7/8
A24R - BF27 PLATINUM
80
66252838282
25
230x6,8x22,23 9 x 9/32 x 7/8
A24R - BF27 PLATINUM
80
66252838285
25
(mm)/“
100
95
75
25
5
0
1
TYPE 27
1
7
Grinding Package Icon
19 �a�
d�iernika 2011 09�5����
25
* 180x6,8x22,23mm is available upon request
GRINDING WHEELS SPECIAL
FOUNDRY FORMULATION
Advantages:
Blend of zirconium oxide and aluminum oxide grains
Higher material removal rate compared to aluminium oxide wheels
No chipping
TYPE
Dimensions
SPECIFICATION
M/S
ART No.
180x7,0x22,23 7 x 9/32x 7/8
ZA24Q - BF27 PLATINUM
80
66252837435
230x7,0x22,23 9 x 9/32 x 7/8
ZA24Q - BF27 PLATINUM
80
66252837437
(mm)/“
100
95
75
25
5
0
TYPE 27
Grinding Package Icon
19 �a�
d�iernika 2011 09�5����
25
25
CERAMIC FLAP DISCS FOR HARD TO GRIND METALS
The GRINDING ‘Platinum’ flap discs are manufactured using a combination of ceramic abrasive
flaps, coated with a cooling agent, and zirconia abrasive flaps, which guarantee a high cutting
rate. They are designed to perform well on hard to grind metals and heat sensitive alloys.
Advantages:
High stock-removal
Comfortable to work with
High performance
Long life
Lower dust emission
Reduced vibration
Reduced noise
CONICAL FIBREGLASS BACKING
TYPE
Dimensions
(mm)/“
Grit
M/S
ART No.
100
95
75
25
5
0
CONICAL
FIBREGLASS
BACKING
115 x 22,23
4 1/2 x 7/8
40
80
66261085977
115 x 22,23
4 1/2 x 7/8
60
80
66261085979
10
115 x 22,23
4 1/2 x 7/8
80
80
66261089556
10
125 x 22,23
5 x 7/8
40
80
66261085981
10
125 x 22,23
5 x 7/8
60
80
66261085982
10
125 x 22,23
5 x 7/8
80
80
66261089558
10
Grit
M/S
ART No.
Grinding Package Icon
19 �a�
d�iernika 2011 09�5����
10
FLAT NYLON BACKING
TYPE
Dimensions
(mm)/“
100
95
75
25
5
0
FLAT NYLON
BACKING
115 x 22,23
4 1/2 x 7/8
40
80
66623376714
115 x 22,23
4 1/2 x 7/8
60
80
66623376715
Grinding Package Icon
19 �a�
d�iernika 2011 09�5����
10
10
FLAP DISCS
GRINDING offers to professional users a complete range of flap discs, with nylon or
fibreglass backings. The discs are made of high quality abrasive cloth and are available
in flat or conical shape to allow working on flat as well as on round surfaces. GRINDING
flap discs ensure high stock removal, long life and good performance. The range of
available grits is wide enough to cover all requirements, from the finest to the roughest
grinding application.
GUIDE TO LABEL READING
A
J
C
B
I
H
G
F
E
C
D
A
GRINDING trademark
B
Disc diameter and hole size
C
Safety certifications
D
Grit type and size
E
Barcode
F
Product type and code
G
Safety pictograms
H
Maximum revolutions per minute
and maximum operating speed
I
Coloured stripe indicating
the allowed speed = 80m/s
J
Applications
Try them out!
To test the Grinding Platinum
range, just get in touch with your
Grinding contact.
Saint-Gobain Abrasivi S.p.A.
Grinding Division
Via per Cesano Boscone 4
20094 - Corsico (Milano)
Italy
Customer Service Italia
Tel: +39 02 4485227
Tel: +39 02 4485293
Tel: +39 02 4485290
Fax +39 02 45100278
[email protected]
Saint-Gobain Abrasives
Export Division
Rue de l’Ambassadeur - B.P.8
F78702 Conflans-Saint-Honorine
France
Tel: +33 1 34 90 40 00
Fax: +33 1 39 19 76 24
[email protected]
Saint-Gobain Abrasives B.V.
Export Division
Groenloseweg 28
7151 HW Eibergen
The Netherlands
Tel: +31 545 466 466
Fax: +31 545 474 605
[email protected]
www.saint-gobain-abrasives.com
www.grinding.it
Form # 2306
GRINDING is a registered trademark
of Saint-Gobain
The personal safety of workers using abrasive products is the primary
concern of GRINDING and Saint-Gobain Abrasives.
All GRINDING Abrasives are developed, manufactured and safety tested
in accordance with the European standard FEPA “EN12413 – Safety
requirements for bonded abrasive products”. In addition, all GRINDING
products meet the strict requirements of the international safety
organisation oSa. Saint-Gobain Abrasives has an ISO 9001 certified quality
system and an ISO 14001 certified environmental management system.
GRINDING is registered trademark of Saint-Gobain Abrasives.