Palmieri collection - Interra Furnishings

Transcription

Palmieri collection - Interra Furnishings
L E A D I N G
E D G E
C O N C E P T
A N D
D E S I G N
Grand in design and bold in detail, Palmieri’s Ambassador collection
lives up to its name. Impeccable handcraftsmanship and stately
design lines create a range of furnishings whose commanding
presence cannot be ignored.
PA L M I E R I
L E A D I N G
E D G E
Goodnow Library in Sudbury, MA chose the
decorative frosted glass insert option for its
Ambassador modular study carrels.
WORK SURFACES
A 1 ⁄ ” solid hardwood, fully-bullnosed edgeband
●
1
4
embraces resilient .050” thick high-pressure plastic
laminate. The underside of this border receives a 3⁄4”
solid trim piece detail with a concave rout, inset 1⁄2”
from the edge. All four corners are mitered at a 45degree angle.
C O N C E P T
Ambassador reading tables
provide a handsome study
space in Dallas, TX’s
Southlake Library.
stately panel frames. End panel faces are grade “A”
plain sliced veneer. Each panel is framed with a solid
hardwood border; a saw cut reveal on outside faces
augments the juncture of panel
and frame. The 5” x 11⁄4” bottom
frame member receives the
additional detail of a 3” high half-
S E AT I N G
T he perfect complement to Ambassador study areas,
●
Ambassador lounge chairs (in single, two-place and
three-place configurations) boast a grade “A”
veneered panel frame design. Their comfortable 4”
foam seats and 41⁄2” foam backs are upholstered in a
variety of select fabrics.
Ambassador side
chairs are available with
upholstered or saddled
hardwood seats. Their
solid hardwood frames
feature a classic slat-back
design and slightly
radiused edges.
Ambassador side chairs
feature eight solid back
slats with upholstered or
hardwood seats.
THE AMBASSADOR
PRODUCT LINE
The Ambassador line of
furnishings is available in a
variety of standard finishes.
For complete product line
details, please consult the
Palmieri Furniture Ltd. Product
Specification Manual or
contact your local Palmieri
Furniture dealer.
■ Atlas Stand
■ Canopy Top
■ Dictionary Stand
■ Display Table
■ End Panel
■ Index Table (Four- or
Six-Place Double-Sided)
■ Lounge Chair (One-,
Two-, or Three-Place)
■ Modular Study Carrel
(Single- or DoubleFaced; Add-On available)
■ PAC Table (One-, Two-,
or Three-Place; Leg or
Panel Base)
■ PAC Terminal (Three- or
Six-Place)
■ Side Chair
■ Study Carrel Table
(Single, Double or FourPlace)
PA L M I E R I
Ambassador Product Line
Designed by: Nancy Lohrer of Integrated
Contract Design (Amesbury, MA).
D E S I G N
moon cutout. As an added feature, the upper portion
of the end panel frame may receive a decorative 20” x
20” frosted glass insert in place of the veneered panel.
Post legs are a 31⁄2” diameter
solid glued-up stock,
trimmed back to a 23⁄8”
diameter along the center
portion and capped at both
ends with a 5” square for a
refined profile. Legs are
mounted to
The panel and post leg
frame of this study carrel tabletops
table is a hallmark of the
using an
Ambassador collection.
epoxy-coated steel plate and machine bolt assembly.
PA N E L S A N D P O S T L E G S
P ainstaking handcraftsmanship transforms select
●
veneers and solids into the Ambassador collection’s
A N D
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
L E A D I N G
2/1/08
4:24 PM
E D G E
Page 1
C O N C E P T
A N D
D E S I G N
Refined. Classic. Enduring. Palmieri’s Aspen collection pays tribute to
centuries past in its distinctive Mission-style design and in the
handcraftsmanship that is devoted to each piece.
PA L M I E R I
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
L E A D I N G
2/1/08
4:24 PM
E D G E
Page 2
C O N C E P T
A N D
D E S I G N
All other end panels in the Aspen range are solid;
three vertical hardwood pilasters are inset against a
grade “A” veneered face. A 13⁄4” x 21⁄2” eased
hardwood edge frames each panel, their horizontal
members overlapping the vertical.
Back panels and mid panels are grade “A”
veneered particleboard. All external edges receive an
eased solid hardwood band, and shelves feature the
added detail of a solid hardwood valence. Back panels
end 3” above the floor.
WORK SURFACES
S E AT I N G
R esilient .050” thick high-pressure plastic laminate is
G
enwrapped with a slightly radiused solid hardwood
band. The long and/or front edges of display tables,
index tables, PAC tables and all carrels receive a
3
⁄4” x 15⁄8” external band.
Rectangular reading tables feature 23⁄4” x 11⁄4” edge
bands along the short sides (square reading tables
along all sides), and 3⁄8” x 11⁄4” bands along the long.
Circular reading tables receive a 1⁄4” x 11⁄4” edge band.
Work surfaces of tables and carrels may be fitted
with 3” diameter grommets and with various electrical
options including steel J-channels for wire maintenance.
PA N E L S
C lean lines and a classic pilaster-andG
rail design are hallmarks of the Aspen
collection’s Mission styling. The solid
hardwood panel bases of rectangular
reading tables, for example, feature two
square legs and five vertical pilasters
buttressed between two horizontal rails.
THE ASPEN
PRODUCT LINE
The Aspen line of furnishings
is available in a variety of
standard finishes.
For complete product line
details, please consult the
Palmieri Furniture Ltd. Product
Specification Manual or
contact your local Palmieri
Furniture dealer.
I Atlas Stand
I AV Browser
I Chair (Side or Arm)
I Dictionary Stand
I Display Table
S ide chairs and armchairs boast solid hardwood
G
frame construction with slightly radiused edges.
Their classic vertical slat-back design is assembled
using mortise and tenon joints. Solid hardwood seats
are slightly saddled for
comfort; upholstered seats
feature 11⁄2” thick firm grade
foam.
I Index Table (Two-,
Three-, Four- or SixPlace)
I Modular Panel Carrel
(Single- or DoubleFaced; Add-On available)
I Newspaper Table
I PAC Table (One-, Two-,
or Three-Place)
I Panel Reference Carrel
(Single- or DoubleFaced; Add-On available)
I Reading Table
(Rectangular, Round or
Square)
PA L M I E R I
For complete Aspen product line details,
please visit www.palmierifurniture.com or
contact your local Palmieri Furniture dealer.
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
11021_Palmieri_V4d
7/13/05
1:42 PM
Page 5
L E A D I N G
E D G E
C O N C E P T
A N D
D E S I G N
With its elegant balance of rich hardwood and airy glass, the Palmieri
Bannister collection pays tribute to historic Old World design and
handcraftsmanship. Bannister’s commanding presence has a home in
some of North America’s most prestigious learning institutions.
PA L M I E R I
11021_Palmieri_V4d
7/13/05
1:43 PM
Page 6
LLEEAADDI INNGG EEDDGGEE CCOONNCCEEPPTT AANNDD DDEESSI IGGNN
WORK SURFACES
■
Tabletops are constructed of 11/4”, three-ply
particleboard core
■
Top surfaces receive a durable .050” high-pressure
plastic laminate sheet
■
Solid hardwood edgeband features a distinctive
knife-edge
■
All edges and corners are slightly eased
■
Work surfaces may be custom fitted for wire
maintenance
■
Panel base exteriors are inset with solid hardwood
bands in a modern interpretation of the Jacobean
paneling style
■
Panels may be custom fitted with electrical options
and wire maintenance accessories
■
Carrel end panels are 11/4”, three-ply particleboard
core, faced with plain sliced, grade “A” veneers;
external edges receive heavy solid hardwood bands
The unique panelling design of Bannister
reading table bases complements that found
in many historic libraries, including the
Methuen, MA-based Nevins Memorial Library.
THE BANNISTER
PRODUCT LINE
The Bannister line of
furnishings is available in a
variety of standard finishes.
For complete product line
details, please consult the
Palmieri Furniture Ltd.
Product Specification Manual
or contact your local Palmieri
Furniture dealer.
■ Atlas Stand
■ Dictionary Stand
■ Display Table (Fabric
Bottom Option)
The Bannister work surface is framed
with a solid hardwood band featuring
an elegant eased knife-edge.
PA N E L S
■
■
■ Index Table (Four- or
Six-Place, Double-Tier)
■
Panels feature a 20° waterfall arch from back
to front
■
End panels may be custom fitted with clear or
frosted glass inserts and hardwood mullions
Tables feature panel bases framed with heavy
vertical and horizontal solid hardwood
■ Newspaper Table
■ PAC Table (One-, Two-,
or Three-Place)
■ Reading Table
(Rectangular, Round, or
Square)
Apron rails and the lowest horizontal panel member
are slightly arched
■ Reference Carrel
(Single- or DoubleFaced; Add-On available)
The waterfall arch of carrel
panels helps create the
distinctive Bannister profile.
PA L M I E R I
Power channels in Bannister modular
computer carrels may be concealed in
the base behind a custom solid panel.
■ Modular Study Carrel
(Single- or DoubleFaced; Add-On available)
■ Study Carrel Table
(Single, Double, or FourPlace)
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
11021_Palmieri_V4d
7/13/05
1:39 PM
Page 1
L E A D I N G
E D G E
C O N C E P T
A N D
D E S I G N
One of Palmieri’s most popular offerings, Beta and Beta II’s
contemporary yet timeless design, all-hardwood construction, and
enduring durability make the collection a complement to virtually
any library environment.
PA L M I E R I
11021_Palmieri_V4d
7/13/05
1:40 PM
Page 2
LLEEAADDI INNGG EEDDGGEE CCOONNCCEEPPTT AANNDD DDEESSI IGGNN
The solid apron bases of Beta II tables include
the added detail of a black painted reveal
(illustrated here at the St. Marguerite D’Youville
Secondary School Library in Oakville, ON)
■
Shelves are constructed from 3/4” particle
core, faced with grade “A” select veneer
and banded with 1/4” solid hardwood
along the front edge
■
Shelves are mounted to panels by means
of hidden keyhole fasteners
WORK SURFACES
■
Tabletops are constructed of 11/4”, three-ply
particleboard core
■
■
Palmieri created a
series of custom Beta
tables for Point
Huron, MI-based
St. Clair County Library,
each featuring a
bullnosed resin edge.
Top surfaces receive a durable
.050” high-pressure plastic
laminate sheet
The bottom surface of BETA &
BETA II designs receive a .020”
backing sheet for balanced
construction
LEGS AND APRON RAILS
■
3/4”
33/8”
BETA tables feature solid
x
apron bases
with a metal bracket assembly, recessed 11/2” from
the table edge
■
BETA table and carrel legs are 13/4” x 13/4” glued-up
solid stock, their edges eased
■
BETA II tables feature a solid 3/4” x 11/4” solid apron
rail with the added detail of a 1/4” x 1/8” black
painted reveal
THE BETA/BETA II
PRODUCT LINE
The Beta/Beta II line of
furnishings is available in a
variety of standard finishes.
For complete product line
details, please consult the
Palmieri Furniture Ltd.
Product Specification Manual
or contact your local Palmieri
Furniture dealer.
■ Atlas Stand
■ Children’s Table/Bench
■
Solid internal hardwood band
features an eased square profile
■ Combination
Atlas/Dictionary Stand
■
Work surfaces may be custom
fitted for electrical/data options
■ Display Table
■ Dictionary Stand
■ Index Table
■ Library Desk
■ Magazine Rack
PA N E L S
■
■
End, back, and mid-panels are constructed from
11/4” veneer plywood
PAC tables (panel base option), PAC terminals and
library desks are 11/4”, three-ply particleboard core,
faced with grade “A” select veneers
■
■
External edges receive
an eased 1/4” solid
hardwood edgeband
Panels may be custom
fitted with electrical
options and wire
management accessories
Distinct angles and clean lines –
like those of this modular study
carrel – define the Beta collection.
Beta II tables feature a solid rail
complete with a 1/4” x 1/8” black
painted reveal tastefully fitted
between the leg plate assemblies.
■
BETA II table and carrel legs are 23/8” x 23/8” gluedup solid stock, their edges eased
■
BETA II apron bases attach to tabletops using a
threaded machine bolt and embedded barrel nut
assembly
PA L M I E R I
■ Modular/Panel
Reference Carrel
■ Modular Study/Panel
Carrel
■ New Book Display Table
■ Newspaper Table
■ PAC Station
■ PAC Table*
■ PAC Terminal
■ Reading Table*
■ Study Carrel Table*
*Indicates items available in the
Beta II collection
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
11021_Palmieri_V4d
7/13/05
1:44 PM
Page 7
L E A D I N G
E D G E
C O N C E P T
A N D
D E S I G N
Hardwood and steel are innovatively combined in Palmieri’s Bridge
collection. Sleek and contemporary, functional and funky, its
cutting-edge design is the perfect counterpart for any progressive
learning environment.
PA L M I E R I
11021_Palmieri_V4d
7/13/05
1:46 PM
Page 8
LLEEAADDI INNGG EEDDGGEE CCOONNCCEEPPTT AANNDD DDEESSI IGGNN
WORK SURFACES
■
Tabletops are constructed of 11/4”, three-ply
particleboard core
■
Top surfaces receive a durable .050” high-pressure
plastic laminate sheet
■
Solid external hardwood edge is semi-bullnosed
■
1/32” v-groove detail highlights the juncture of
hardwood and laminate
■
Work surfaces may be custom fitted for various
electrical/data options
L E G S A N D S E AT I N G
THE BRIDGE
PRODUCT LINE
Work surfaces “float” atop
steel pintels via a concealed
steel plate assembly
■
Work surfaces float 2” atop 16-gauge tubular steel
legs (2” diameter) via a steel pintel and plate assembly
■
All welds and grinds are
smoothed
■
Legs may be custom
painted using an electrostatically applied epoxy
powder for resiliency
■
Sabrina chairs with perforated backs beautifully
offset the tubular steel legs and marbled laminate
work surface of Bridge reading tables at the
Charles A. Wagner Branch Library in Metairie, LA.
The Empire seating line
is a beautiful complement
to the Bridge collection
The Bridge line of furnishings
is available in a variety of
standard finishes.
For complete product line
details, please consult the
Palmieri Furniture Ltd.
Product Specification Manual
or contact your local Palmieri
Furniture dealer.
■ Atlas Stand
■ Children’s Atlas
Stand/Dictionary
Stand/Combination
■ Combination
Atlas/Dictionary Stand
■ Dictionary Stand
Its tubular steel frame
makes the Empire chair
an ideal counterpart to
the Bridge design range.
■ Display Table (Fabric
Bottom Option)
■ Index Table (Four- or
Six-Place, Double-Tier)
■ Magazine Rack (Four- or
Five-Sloping Shelf)
PANELS
■ Newspaper Table
■
End, back, and mid-panels of study carrels are
constructed from 3/4” veneer plywood
■
External edges receive an eased 1/4” solid hardwood
edgeband
■
End panels of index and study carrel tables are 11/4”,
three-ply particleboard core, faced with plain sliced,
grade “A” veneers; external edges receive an eased
1/4” solid hardwood edgeband
■
Panels may be custom fitted with electrical options
and wire management accessories
■
Shelves are constructed from 3/4” veneer plywood
with an eased 1/4” solid hardwood band along the
facing edge
■ PAC Table (One-, Two-,
or Three-Place)
■ Reading Table
(Rectangular, Round, or
Square)
The sleek and contemporary
Bridge collection is a perfect
combination with the
custom designed circulation
desk at the Charles A.
Wagner Branch Library.
PA L M I E R I
■ Study Carrel Table
(Single, Double, or
Four-Place)
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
L E A D I N G
2/1/08
4:25 PM
E D G E
Page 5
C O N C E P T
A N D
D E S I G N
Warm hardwoods and a subtle beveled profile lend Palmieri’s Delicato
collection a distinctly European flair. Its uncompromising design
delivers the ultimate in understated style, durability, and functionality
to any learning environment.
PA L M I E R I
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
2/1/08
4:25 PM
Page 6
LLEEAADDI INNGG EEDDGGEE CCOONNCCEEPPTT AANNDD DDEESSI IGGNN
PA N E L S
I
End, back, and mid-panels are constructed from
3/4” veneer plywood
I
External edges receive an eased 1/8” solid hardwood
edgeband
I
End panels of PAC tables/terminals and library
desks are 11/4”, three-ply particleboard core, faced
with plain sliced, grade “A” veneers; external edges
receive an eased 1/4” solid hardwood edgeband
WORK SURFACES
I
I
I
Tabletops are constructed of 11/4”, three-ply
particleboard core
Top surfaces receive a durable .050” high-pressure
plastic laminate sheet
I
Panels attach to legs using key-hole fasteners
I
Panels may be custom fitted with electrical options
and wire management accessories
I
Study carrel shelves are constructed from 3/4” veneer
plywood with an eased 1/4” solid hardwood band
along the facing edge
Solid external hardwood edge is handsomely
chamfered
I
All edges and corners are slightly radiused
I
Work surfaces may be custom fitted with
electrical/data options
LEGS AND APRON RAILS
I
I
I
THE DELICATO
PRODUCT LINE
The Delicato line of
furnishings is available in a
variety of standard finishes.
For complete product line
details, please consult the
Palmieri Furniture Ltd.
Product Specification Manual
or contact your local Palmieri
Furniture dealer.
I Atlas Stand
I Combination
Atlas/Dictionary Stand
Carrel and table legs are 23/8” square solid hardwood
featuring 1/4” radiused vertical edges (laminate inlay
option available)
I Dictionary Stand
Table legs attach to tabletops using steel plate and
threaded machine bolt assembly
I Library Desk
Optional apron rails are 3/4” x 11/4” solid hardwood,
fitted between the legs and set back behind the
tabletop’s drop edge
I Modular Study Carrel
I Display Tables
I Index Table
I Magazine Rack
I New Book Display Table
I Newspaper Table
I PAC Station
I PAC Tables
I PAC Terminals
I Reading Tables
I Reference Carrels
I Study Carrel Tables
PA L M I E R I
For complete Delicato product line details,
please visit www.palmierifurniture.com or
contact your local Palmieri Furniture dealer.
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
L E A D I N G
2/1/08
4:26 PM
E D G E
Page 9
C O N C E P T
A N D
D E S I G N
Palmieri’s Element collection is a symmetry of the classic and the
contemporary… where handcraftsmanship combines the finest of
natural and man-made elements in pieces that offer enduring
functionality and distinctive silhouettes.
PA L M I E R I
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
L E A D I N G
2/1/08
4:27 PM
E D G E
Page 10
C O N C E P T
WORK SURFACES
A N D
D E S I G N
LEGS
F ive-inch stainless steel laminate inserts along
G
T apered solid wood legs attach to the underside
G
working edges align with .050” thick high-pressure
plastic laminate to create a refined, durable work
surface that is then bound with a solid hardwood edge.
Work surfaces may be fitted with electrical options
and accessories (including 3” diameter grommets and
steel J-channels) for wire maintenance.
of index table, reading table, PAC table and study
carrel tabletops using a fin-angled steel plate and
threaded machine bolt assembly (index tables feature
an additional 5th leg for central support). This exposed
stainless steel hardware, powder epoxy-coated for
resiliency, is accented by two decorative steel angle bars
positioned 5” apart at the top of each leg.
The Element line of
furnishings is available in a
variety of standard finishes.
PA N E L S
M odular study carrels, modular reference carrels,
G
atlas stands and dictionary stands feature end, mid
and/or back panels with a particleboard core, faced on
both sides with plain sliced grade “A” veneer faces
and miter-banded with an eased solid hardwood edge
(end panels are 1” thick with a 15⁄8” x 11⁄2 ” edge; mid
panels are 11⁄4” thick with a 11⁄4” x 11⁄2” edge; back
panels are 1” thick with a 1” x 11⁄4” edge). End panels,
including those for steel shelving ranges, receive the
additional detail of two steel accent bars inset
horizontally between the vertical frame members.
The side panels, mid panels, back panels and
shelves of Element index tables and study carrel tables
are 3⁄4” thick particleboard, grade “A” veneered on
both faces. External edges are handsomely banded
with a 1⁄4” hardwood border, and side panels slope
from top to bottom in an eye-catching design detail.
The front edges of PAC terminal
end and mid panels feature an
exposed 16-gauge steel leg. Panels
may be custom fitted with electrical
options and accessories for wire
maintenance.
For complete product line
details, please consult the
Palmieri Furniture Ltd.
Product Specification Manual
or contact your local Palmieri
Furniture dealer.
I Atlas Stand
I Chair (Reading or Arm)
I Dictionary Stand
S E AT I N G
I End Panel (Single- or
Double-Faced)
E lement reading chairs and armchairs complement
G
I Index Table (4 or 6
Place)
individual and group study areas in both style and
stain. Steel frames, in stainless or black powder epoxycoated finishes, embrace wood backs and seats that are
slightly saddled for comfort. Optional fabric or
leatherette upholstery is also available.
I Modular Reference
Carrel (Single- or
Double-Faced; Add-On
available)
I Modular Study Carrel
(Single- or DoubleFaced; Add-On available)
I PAC Table (One-, Two-,
or Three-Place)
I PAC Terminal (Three- or
Six-Place)
I Reading Table
(Rectangular, Round or
Square)
I Study Carrel Table
(Single, Double or
Four-Place)
PA L M I E R I
For complete Element product line details,
please visit www.palmierifurniture.com or
contact your local Palmieri Furniture dealer.
THE ELEMENT
PRODUCT LINE
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
L E A D I N G
E D G E
C O N C E P T
A N D
D E S I G N
Warm hardwoods merge with cool steel to create Palmieri’s Empire
collection, a range of smoothly silhouetted contemporary pieces
unmatched in aesthetic value and structural integrity.
PA L M I E R I
L E A D I N G
E D G E
C O N C E P T
A N D
D E S I G N
Empire reading tables and upholstered side
chairs add vibrant color to San Diego Mesa
College’s $20M Learning Resource Center.
LEGS AND APRON RAILS
L egs and apron rails are crafted of 16-gauge
●
WORK SURFACES
A solid external hardwood edge, handsomely
●
radiused to a full bullnose detail, frames hardwearing
.050” thick high-pressure plastic laminate. All four
corners are sectored to form a smooth, 21⁄2” radiused
corner detail.
Work surfaces may be fitted with various
electrical options including 3” diameter grommets
and steel J-channels for wire maintenance.
PA N E L S
E mpire index tables, PAC tables and study carrels
●
feature side panels, mid panels, and/or back panels
that are constructed of 3⁄4” and 1” plywood veneers.
Top and front external edges receive a 1⁄4” radiused
hardwood band.
The end, mid and/or back panels of modular
study carrels, modular reference carrels, atlas stands
and dictionary stands are faced with grade “A” select
veneers. All four edges of each panel receive a 5⁄16” solid
hardwood border. End and mid panels are machined
to receive a 11⁄2” diameter, 16-gauge steel leg.
All shelves are faced
with 3⁄4” grade “A” select
veneer plywood or
laminate and front edges
are banded with 1⁄4” solid
hardwood. Shelves are
mounted to panels by
means of metal flanges.
steel, which is powder-epoxy coated for
durability in a choice of colors. Tubular legs
are 21⁄2” in diameter and
attach to index, reading,
PAC and table carrel tabletops
using a radiused steel plate and
threaded machine bolt
assembly. The outside corner of
A 2” metal surround
each plate receives the
embraces a steel plate and
bold detail of a 2” high
machine bolt assembly of
legs, tabletop and apron rail. metal surround.
The legs of modular reference carrels, panel
reference carrels and PAC terminals are 11⁄2” in
diameter and are fitted with key-hole screws to allow
assembly in one-, two-, three-, and four-way
configurations.
S E AT I N G
E mpire side chairs and armchairs replicate the
●
smooth lines of Empire carrels and tables. Frames are
11⁄2” diameter seamless cold rolled tubular steel,
finished with welded steel dome end caps. Seats and
backs are contoured for optimum
comfort and are available in
upholstered and wood veneer finishes.
The Empire line of furnishings is
available in a variety of standard
finishes.
For complete product line details,
please consult the Palmieri
Furniture Ltd. Product
Specification Manual or contact
your local Palmieri Furniture
dealer.
■ Atlas Stand
(Leg or Panel Base)
■ Chair (Side or Arm)
■ Dictionary Stand
■ Display Table
■ Index Table (Four- or
Six-Place Double-Sided)
■ Magazine Rack
■ Modular Panel Carrels
(Single- or DoubleFaced; Add-On available)
■ Modular Reference
Carrel
■ Modular Study Carrel
(Single- or DoubleFaced; Add-On available)
■ PAC Table (One-, Two-,
or Three-Place)
■ Reading Table
(Rectangular, Round or
Square)
Massachusetts-based Northampton
High School selected a variety of
Empire designs for its library facility.
PA L M I E R I
The Empire atlas stand is
available with a panel or leg
(shown here) base.
THE EMPIRE
PRODUCT LINE
■ Reference Carrels
(Single- or DoubleFaced; Add-On available)
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
11021_Palmieri_V4d
7/13/05
1:40 PM
Page 3
L E A D I N G
E D G E
C O N C E P T
A N D
D E S I G N
Hardwood and steel combine to create the bold profile of Form,
the most progressive collection in Palmieri’s design range.
Angular and commanding, Form’s ultramodern appeal makes
it an ideal counterpart to state-of-the-art learning facilities.
PA L M I E R I
11021_Palmieri_V4d
7/13/05
1:41 PM
Page 4
LLEEAADDI INNGG EEDDGGEE CCOONNCCEEPPTT AANNDD DDEESSI IGGNN
WORK SURFACES
Durable laminate
tabletops are
miter-banded with
a generous 21/2”
chamfered
hardwood edge.
L E G A N D PA N E L B A S E S
■
Tabletops are constructed of 11/4”,
three-ply particleboard core
■
Study carrels, PAC tables and reading tables are
available with a leg or panel base
■
Top surfaces receive a durable
.050” high-pressure plastic
laminate sheet
■
Work surfaces float on steel pintels atop both leg and
panel bases using a concealed steel plate assembly
■
Legs are 3” diameter 16-gauge tubular steel,
embraced by a hexagonal chamfered steel plateand-pintel detail; a horizontal steel stretcher
buttresses the top of legs along the short side (the
addition of a lower horizontal stretcher creates a
frame for the panel base)
21/2”
■
Solid
hardwood mitered
edge is distinctively chamfered
■
All edges and corners are
slightly eased
■
Work surfaces may be custom
fitted for various electrical/data
options
PA N E L S
■
■
■
■
■ PAC Table (Leg or Panel
Base; One-, Two-, or
Three-Place)
■ PAC Terminal (Three- or
Six-Place)
Study carrel and PAC table side/end panels feature
an angled facing edge
■
Panels may be custom fitted with
electrical options and wire
maintenance accessories
Study carrel shelves are
constructed from 3/4” veneer
plywood with an eased 1/4” solid
hardwood band along the
facing edge
Palmieri created custom Form end panels for the
shelving at Cape Coral Public Library in Florida.
For complete product line
details, please consult the
Palmieri Furniture Ltd.
Product Specification Manual
or contact your local Palmieri
Furniture dealer.
■ Dictionary Stand
Study carrel panels are topped with an eased,
3” solid hardwood edge; all other external edges
receive an eased 1/4” solid hardwood edgeband
■
The Form line of furnishings
is available in a variety of
standard finishes.
■ Atlas Stand
Study carrel panels are 11/4”, three-ply particleboard
core, faced with plain sliced, grade “A” veneers; side
and back panels attach using a steel hinge assembly
to create a “floating” effect
All other end, back, and mid-panels throughout the
Form range are constructed from 3/4” veneer
plywood; external edges receive an eased
1/4” solid hardwood edgeband
THE FORM
PRODUCT LINE
Contrasting hardwood stains combine
with ebony steel to create a striking 2place PAC table at the Cape Coral Public
Library in Cape Coral, FL.
■
Panels, available as perforated steel or veneered
hardwood, are suspended within the base frame
using steel pintels
■
All welds and grinds are smoothed
■
All steel components receive a baked powder epoxy
enamel treatment (available in a variety of finishes)
for durability
PA L M I E R I
■ Reading Table (Leg or
Panel Base; Rectangular,
Round, or Square)
■ Study Carrel Table (Leg
or Panel Base; Single,
Double, or Four-Place)
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
L E A D I N G
3/1/08
12:29 PM
E D G E
Page 11
C O N C E P T
A N D
D E S I G N
Palmieri’s Fusion collection is striking in its contrasts: hardwood and
steel, sheens and shadows, solids and translucents. The result is a
range of innovative yet elegant pieces that complement both
conservative and contemporary learning environments.
PA L M I E R I
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
L E A D I N G
2/1/08
4:27 PM
E D G E
Page 12
C O N C E P T
A N D
D E S I G N
atmosphere. A clear intersecting line design adds
decorative interest.
Shelves are laminate or veneer plywood with its
front edge banded with 1⁄4” solid hardwood. Hidden
keyhole fasteners mount shelves to panels.
THE FUSION
PRODUCT LINE
The Fusion line of furnishings
is available in a variety of
standard finishes.
WORK SURFACES
L aminated with a .050” thick high-pressure plastic
G
laminate and bordered with a 7⁄8” x 11⁄4” solid
hardwood edge, Fusion work surfaces are stylishly
designed for durability. Edges are radiused 1⁄2” at the
top and are eased at the bottom. A subtle 1⁄32” v-groove
detail highlights the juncture of laminate and solid.
PA N E L S A N D TA B L E R A C K S
F ull panel study carrels are grade “A” select
G
veneered 1” particleboard, bordered with a 1⁄4” solid
hardwood band. Front edges are machined to receive
a 16-gauge tubular steel leg.
Index tables and study carrel tables feature a
floating rack assembly; their shelves are notched at
each end to embrace two to three sectional end panels.
As an added feature, study carrel panels may receive a
20” x 20” frosted glass panel
insert. Edged with solid
hardwood, the panels maintain
privacy while creating a lightfilled workspace with an open
For complete product line
details, please consult the
Palmieri Furniture Ltd. Product
Specification Manual or
contact your local Palmieri
Furniture dealer.
FRAMES AND LEGS
T he tabletops of Fusion reading tables (square and
G
rectangular), PAC tables, index tables, study carrel
tables and display tables float 2” atop a sleek 16-gauge
steel frame. Comprised of 2” x 2” hollow legs and
horizontal stretchers, the frame secures to the
underside of tabletops via a steel pintel and plate
assembly. All welds and grinds are smoothed, and
each frame is painted using an electro-statically
applied epoxy powder for lasting resiliency.
Carrel legs are 16-gauge tubular steel, finished in
a powder epoxy and topped with a steel cap. Each is
fitted with keyhole screws to allow assembly in one-,
two-, three-, and four-way configurations.
I Atlas Stand
I Dictionary Stand
I Display Table
I End Panel (Single- or
Double-Faced)
I Index Table (Four- or
Six-Place)
I Modular Reference
Carrel (Single- or
Double-Faced; Add-On
available)
I Modular Panel Carrel
(Single- or DoubleFaced; Add-On available)
I PAC Table (One-, Two-,
or Three-Place)
I PAC Terminal (Three- or
Six-Place)
I Reading Table
(Rectangular, Round or
Square)
I Study Carrel Table
(Single, Double or FourPlace)
PA L M I E R I
For complete Fusion product line details,
please visit www.palmierifurniture.com or
contact your local Palmieri Furniture dealer.
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
L E A D I N G
2/1/08
4:24 PM
E D G E
Page 3
C O N C E P T
A N D
D E S I G N
Two contrasting elements – hardwood and steel – come together to create the
unmistakable profile of Palmieri’s Linear collection. Angular and bold,
Linear’s modern design commands the attention of its beholder… and belies
the traditional handcraftsmanship devoted to each piece.
PA L M I E R I
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
L E A D I N G
3/1/08
12:29 PM
E D G E
WORK SURFACES
T he Linear tabletop’s 1 ⁄ ” particleboard core is
G
1
4
topped with .050” thick high-pressure plastic
laminate, then edged with a 2” x 11⁄4” solid hardwood
border. This band is tapered top and bottom to create
a striking 5⁄8” “knife-edge,” which is then eased.
All four corners are mitered at a 45-degree angle.
Tabletop undersides receive two parallel 16-gauge
steel tube stretchers, angled downward to assemble
with Linear’s steel frame (see below).
Work surfaces may be fitted with 3” diameter
grommets and steel J-channels for wire maintenance.
PA N E L S A N D TA B L E R A C K S
E nd panels for shelving ranges are grade “A” select
G
veneered, 11⁄4” thick particleboard, edged with a
5
⁄16” solid hardwood band. Edges are machined and
fitted with keyhole lock fasteners to receive a 11⁄2” steel
leg. Dictionary and atlas stands feature 1” thick side
panels (back panels: 3⁄4”) comprised of grade “A”
Page 4
C O N C E P T
A N D
D E S I G N
veneered particleboard. Steel angle irons
encircle the panels using spacers to create
a floating effect.
All shelving and table racks, as
well as study carrel table panels, are
3
⁄4” veneered particleboard core bordered
with a 1⁄4” thick hardwood band along the
external edge. Shelves are mounted to panels using
metal flanges; racks, using wood screws.
FRAMES AND LEGS
S teel and hardwood work in tandem to create
G
Linear’s stylish frame. Hexagonal chamfered solid
wood legs embrace a 11⁄2” diameter 16-gauge tubular
steel post that extends 2” beyond the wood at top and
bottom. In table designs, these posts are welded to a
21⁄2” diameter horizontal top frame, which protrudes
from the short ends of work surfaces by 31⁄2”.
To ensure lasting resiliency, all steel components
receive a baked powder epoxy enamel treatment that
is available in a variety of textured finishes.
THE LINEAR
PRODUCT LINE
The Linear line of furnishings is
available in a variety of standard
finishes.
For complete product line details,
please consult the Palmieri
Furniture Ltd. Product
Specification Manual or contact
your local Palmieri Furniture
dealer.
I Atlas Stand
I Dictionary Stand
I End Panel (Single- or
Double-Faced)
I PAC Table (One-, Two-,
or Three-Place)
I PAC Terminal (Three- or
Six-Place)
I Reading Table
(Rectangular, Round or
Square)
I Study Carrel Table
(Single, Double or FourPlace)
I Display Case
For complete Linear product line details,
please visit www.palmierifurniture.com or
contact your local Palmieri Furniture dealer.
PA L M I E R I
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
L E A D I N G
3/1/08
12:30 PM
E D G E
Page 13
C O N C E P T
A N D
D E S I G N
Gleaming hardwoods, clean design lines and continuous
bullnose edges make Palmieri’s stylish and contemporary
Monaco collection a feast for the senses of sight and touch.
PA L M I E R I
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
L E A D I N G
2/1/08
4:28 PM
E D G E
Page 14
C O N C E P T
G
D E S I G N
Shelves are grade “A” veneered 3⁄4” particleboard,
WORK SURFACES
M onaco work surfaces are 11⁄4”, 3-ply particleboard
enveloped by a durable high-pressure plastic laminate
coating. Edges are finished with a solid hardwood
border, radiused to a full bullnose detail. A subtle 1⁄32”
v-groove detail highlights the juncture of laminate
and solid.
A N D
finished with a 1⁄4” solid hardwood band at the front
edge (atlas and dictionary stands receive a solid
retainer lip/book support rail). Shelves are mounted
to panels via hidden keyhole fasteners; rack
configurations attach to tabletops using wood screws.
THE MONACO
PRODUCT LINE
The Monaco line of
furnishings is available in a
variety of standard finishes.
For complete product line
details, please consult the
Palmieri Furniture Ltd.
Product Specification Manual
or contact your local Palmieri
Furniture dealer.
I Atlas Stand
Work surfaces may be fitted with various electrical
options including 3” diameter grommets and steel
J-channels for wire maintenance.
PA N E L S
G
M onaco’s panels are comprised of a 11⁄4”
particleboard core faced on both sides with plain
sliced veneers. All external edges feature a 1⁄8” solid
hardwood band, radiused to a full bullnose detail.
Panels extend 1⁄2” above the work surfaces
of all Monaco table designs. In a
complementary design feature, the back
panels of all carrels are recessed 3⁄4” from
the top edge of side panels. Similarly, the
side panels of atlas and dictionary stands
extend 3⁄4” beyond their cabinets.
P E D E S TA L B A S E S
G
M onaco round and square reading tables receive
pedestal bases, each of which is comprised of four leg
members in a pinwheel configuration. Solid
hardwood, the right-angled pedestal members
assemble along the vertical via a 1⁄4” steel plate.
I Dictionary Stand
I Display Table
I Index Table (Four- or
Six-Place)
I Library Desk
I Modular Study Carrel
(Single- or DoubleFaced; Add-On available)
I Newspaper Table
I PAC Table (One-, Two-,
or Three-Place)
I PAC Station
I PAC Terminal (Single-,
Three-, or Six-Place)
I Reference Carrel
(Single- or DoubleFaced; Add-On available)
PA L M I E R I
For complete Monaco product line details,
please visit www.palmierifurniture.com or
contact your local Palmieri Furniture dealer.
I Combination AtlasDictionary Stand
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
L E A D I N G
E D G E
C O N C E P T
A N D
D E S I G N
The pursuit of excellence begins with an innovative vision. Princeton
achieves this goal with timeless elegance and precision craftsmanship.
Exclusive to Palmieri, Princeton encompasses all possible attributes
with exceptional beauty and sophistication.
PA L M I E R I
LLEEAADDI INNGG EEDDGGEE CCOONNCCEEPPTT AANNDD DDEESSI IGGNN
PA N E L S
■
3” built-up high density particle core (ReadingPanel Base, Index, Display tables), 21/2” for all
other pieces, with premium grade “A” face veneers
■
Centre indentation in each panel receives an elegant
3/16” x 1/8” deep solid black inlay, 2” from both top
and bottom of panel
The Princeton line creates a warm and
elegant environment at the Poco Mountain
High Library in Pennsylvania.
WORK SURFACES
THE PRINCETON
PRODUCT LINE
■
Tabletops are constructed of 2” built-up high
density particle board
The Princeton line of
furnishings is available in a
variety of standard finishes.
■
Surfaces receive a durable .050” high pressure plastic
laminate sheet or a veneer surface with a black
epoxy veneer inlay (Panel Base tables only)
For complete product line
details, please consult the
Palmieri Furniture Ltd.
Product Specification Manual
or contact your local Palmieri
Furniture dealer.
■ Atlas Stand
■ AV Browser
■ Dictionary Stand
The elegant and sophisticated Princeton line
beautifully compliments the design of the
Howard University Law Library in Washington DC.
Princeton tables are available
in a variety of styles and
finishes, including the timeless
rectangular leg base table.
■
Work surface edges are tapered and extend beyond
the panel bases
■
Horizontal edges are banded with a solid hardwood
internal edge
■
Edges are machined inward creating a chamfered
knife edge detail
■
■
A raised panel effect is achieved using 2” wide rift
cut veneers running around the panel perimeter,
meeting at mitered corners
Panels are framed on all four sides with a wide solid
hardwood, top and bottom member overlapping the
vertical edges
■ Index Table (Four- or Six
Place Double Sided,
Double Tier)
■ Study Carrels (Single,
Double or Four-Place)
■ End Panels
■ Newspaper Table
■ PAC Table (One-, Twoor Three Place)
■
Study carrel shelves are constructed in 3/4” veneer
plywood with eased corners and edges
■ PAC Table (Two Place
D/F-, Four Place D/F- or
Six Place D/F)
■
Shelves are 9” deep faced with a premium grade
“A” veneer and the front edge banded with a 1/4”
solid external hardwood
■ Reading Table Leg Base
(Rectangular, Round, or
Square)
■
Shelves are installed 15” above the work surface
PA L M I E R I
The Princeton study carrel work
surface incorporates a chamfered
knife edge detail and extends
beyond the panel bases.
■ Display Table
■ Reading Table Panel Base
(Rectangular, Round, or
Square)
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
L E A D I N G
2/1/08
4:26 PM
E D G E
Page 7
C O N C E P T
A N D
D E S I G N
Meticulous handcraftsmanship and premium materials combine to
create the clean design lines of Palmieri’s Ronda collection. At home
in any study environment, these smoothly silhouetted pieces are
timeless… and stand the test of time.
PA L M I E R I
12638 ALL_Palmieri_2pg_7:ALL_Palmieri_2pg
L E A D I N G
2/1/08
4:26 PM
E D G E
WORK SURFACES
T he Ronda tabletop’s 3-ply particleboard core
G
receives a .050” thick high-pressure plastic laminate
coating, then a solid hardwood drop edge. Radiused 1⁄2”
at top and bottom to form a smooth semi-bullnose, the
edge meets the laminate with a 1⁄32” v-groove detail.
Page 8
C O N C E P T
A N D
D E S I G N
stands features grade “A” veneered, 3⁄4” particleboard
side panels. Vertical edges receive a 1⁄4” solid
hardwood border; all edges and corners are
radiused.
Ronda shelves are 3⁄4” veneered plywood or
laminate, finished with an eased hardwood
band at the front edge (atlas and dictionary
stands receive a solid retainer lip/book support rail).
Shelves are mounted to panels via hidden keyhole
fasteners, while rack configurations attach to
tabletops using wood screws.
LEGS AND APRON RAILS
A ll legs are 2 ⁄ ” x 2 ⁄ ” glued-up solid stock, their
G
3
Work surfaces may be fitted with various electrical
options including 3” diameter grommets and steel
J-channels for wire maintenance.
PA N E L S
T he end, mid and back panels of study and reference
G
carrels are comprised of grade “A” veneered plywood
that is finished with
an eased 1⁄8” hardwood
border along the top
and bottom edges.
Panels attach to legs
(see below) by way
of keyhole fasteners.
The tongue-andgroove assembled
cabinetry of atlas
stands and dictionary
3
8
vertical edges radiused 1⁄2” to complement the semibullnosed edge of work surfaces. Embedded barrel
nuts allow the leg to be mounted to tabletops using
epoxy-coated steel corner plates and two threaded
machine bolts.
To create a more finished look, Ronda designs
offer an apron rail option. Solid hardwood apron rails
are fit between the legs and are set back 3⁄4” behind the
external edge of tabletops or panels.
The Ronda line of furnishings
is available in a variety of
standard finishes.
For complete product line
details, please consult the
Palmieri Furniture Ltd. Product
Specification Manual or
contact your local Palmieri
Furniture dealer.
I Atlas Stand
I Combination AtlasDictionary Stand
I Dictionary Stand
I Display Table
I Index Table (Four- or
Six-Place)
I Magazine Rack
I Modular Study Carrel
(Single- or DoubleFaced; Add-On available)
I New Book Display Table
I Newspaper Table
I PAC Table (One-, Two-,
or Three-Place)
I Reading Table
(Rectangular, Round or
Square)
I Reference Carrel
(Single- or DoubleFaced; Add-On available)
I Study Carrel Table (36”,
48”, 60” or 72” wide;
Single-, Double- or
Four-Place)
PA L M I E R I
For complete Ronda product line details,
please visit www.palmierifurniture.com or
contact your local Palmieri Furniture dealer.
8
THE RONDA
PRODUCT LINE
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design
L E A D I N G
H E L P I N G
E D G E
T O
C O N C E P T
P R O T E C T
O U R
A N D
D E S I G N
E N V I R O N M E N T
Lyptus Wood and the Vista Collection
An Earth-Friendly Choice
Vista Meaning: “Have you seen”
PA L M I E R I
L E A D I N G
H E L P I N G
T O
E D G E
P R O T E C T
LYPTUS® WOOD AND THE VISTA COLLECTION
E N V I R O N M E N TA L I S M
PART OF OUR TRADITION
P almieri Furniture has handcrafted library furnishings
G
of enduring quality and superior workmanship for more
C O N C E P T
O U R
A N D
D E S I G N
E N V I R O N M E N T
The Vista table’s work surface is comprised of durable,
high-pressure plastic laminate and bordered with an
eased, solid 2” edgeband. The edgeband’s underside
receives a solid 2” trim piece detail, inset 1” from the
edge. Bolstered by the legs, the trim piece conceals the
table’s mechanical assembly.
than 35 years. We recognize that, in order to carry
this tradition into the future, we must consider the
sustainability of the forest products we use.
As a Forest Stewardship Council certified manufacturer,
we’ve been entrusted in a chain of custody that ensures
our products originate from well-managed forests. Now
we’ve expanded our selection of eco-friendly product
offerings even further by utilizing a unique, responsibly
grown premium hardwood: Lyptus®.
W H AT I S LY P T U S ® ?
A hybrid of two eucalyptus species, Lyptus
G
®
exhibits the
density of maple and the appearance of mahogany. But
unlike these premium hardwoods, which take decades to
reach maturity, Lyptus® can be harvested in just 14 to 16
years. This is because the wood thrives in the warm
climate of Brazil, where it is plantation-grown among
reintroduced indigenous trees to preserve the natural
habitat. For these reasons, Lyptus® wood represents a
fully sustainable and renewable resource. It allows our
industry to meet the demand without depleting the
THE VISTA
PRODUCT LINE
The Vista line of furnishings is
available in a variety of
standard finishes.
A pair of routed details at the top and one at the bottom
of each square leg creates an elegant profile. Made of
solid, 2-3/8” hardwood, the legs accept two horizontal
rails along the short sides of the table. In a design detail
reminiscent of the Mission style, these rails buttress 8
quadralinear posts. Braced between the two lower rails is
a solid rectangular stretcher, which completes the table’s
robust, yet balanced, silhouette.
Lyptus® wood receives commonly
used stains and finishes well. With a
rich, red tone that rivals that of
mahogany or cherry, natural
Lyptus® wood is striking when
finished with clear premium
lacquer, as shown here.
For complete product line
details, please consult the
Palmieri Furniture Ltd. Product
Specification Manual or
contact your local Palmieri
Furniture dealer.
I Atlas Stand
I Chair (Side or Arm)
I Dictionary Stand
I Display Table
I Study Carrels
I PAC Table (One-, Two-,
or Three-Place)
I Reading Table
(Rectangular, Round or
Square)
I End Panels
supply… or sacrificing quality.
DENSITY AT 12% MC: A COMPARISON
Species
Lyptus®
Hard Maple
Cherr y
White Oak
Birch
kg/m
650
630
500
680
620
40
39
31
42
38
lb/ft3
3
For more information on the complete range of Palmieri
library furnishings, please visit www.palmierifurniture.com
For more information on Lyptus® wood, please visit
www.lyptus.net
Source: Weyerhaeuser
I N T R O D U C I N G V I S TA
T he outstanding workability and luxuriant hue of
G
Lyptus® wood has inspired the creation of an entirely
new Palmieri collection: Vista. The collection’s premiere
piece, the rectangular table, unites a contemporary,
streamlined design with traditional Old World
handcraftsmanship.
Environmental printing – it’s more than recycled paper.
PA L M I E R I
Palmieri Furniture Ltd.
1230 Reid Street, Richmond Hill
Ontario, Canada L4B 1C4
Tel: (905) 731-9300 Fax: (905) 731-9878
Toll Free: 1-800-413-4440
Website: www.palmierifurniture.com
Leading Edge
Concept and Design