FLAVIA sb100 brewer user guide

FLAVIA sb100 brewer
user guide
index
page
naming the parts:
safety precautions:
before using:
how to use:
1
2
4
5
• heating water
• making a beverage
• dispensing hot water:
6
maintenance:
• storage
• descaling
volume adjustment:
trouble shooting:
Replacement parts
& specifications: Back Cover
myflavia.com
7
8
9
Discover the FLAVIA® experience - the Drinks Station for your every mood.
Thank you for joining the FLAVIA® community.
We believe that one size doesn't fit all. The FLAVIA SB100 drinks station offers what you need to suit your every want,
situation and mood.
Our ingenious 'brew-by-pack' technology uses individual foil sealed Filterpacks for absolute freshness until the moment
they are brewed. This unique technology allows us to offer four different categories of drinks.
The FLAVIA® SB100 is robust and reliable, and there is no need to clean between brews, making it fresh and fun, with
none of the hassle. Please read these instructions before using the FLAVIA® SB100, and keep them safe for future
reference.
Drinks for Every Mood
What if coffee isn't your cup of tea? With the FLAVIA® Drinks Station you
get a wide range of inspiring drinks to fit every mood.
Gourmet Coffees
Wellbeing Drinks
There's a FLAVIA® coffee for every
taste. Why settle for one, when you
can sample your way around our
global menu? Savour our rich single
origin coffees, be adventurous with
flavoured coffees, give yourself an
extra kick with our stronger coffees,
or relax with lighter blends and
decaffeinated options.
Nurture your mind, body
and soul with an inspiring
selection of delicious,
harmonious and
invigorating drinks, each
with its own unique benefit
to boost your wellbeing.
Indulgent Creations
Who doesn't love a treat?
From Choco to Exotic Chai
tea, there is something to
tempt you.
Fresh Leaf Teas
FLAVIA® teas draw together the
varied traditions of Europe and the
Orient. We provide fresh leaf teas to
suit the needs of every occasion from full bodied blends to light and
delicate brews.
* The manufacturer reserves the right to alter the selection without notice.
Features of your drinks station
Removable parts recognition
Rated current 15A
Voltage 120V
Steam vent
Lid handle
Cup stand
Control panel
Power
plug
Start button
Mesh filter
(This is a replaceable part,
please see back cover)
Please ensure the
mesh filter is inserted
in the tank correctly. If
it is not, please insert
as shown on page 4.
Drip tray
Casing
Cord
Filterpack holder
Water level window
Separator
Water level
Cup stand
Take out of the
bag.
Power switch
(I…On, O…Off)
Drip tray
Active carbon filter
(This is a replaceable part,
please see back
cover)
• For instructions on how to install please see page 4.
Handles
Notice Your drinks station is
supplied with protection on
the Filterpack holder, Badge, Water
level window and Control panel.
Please remove prior to use.
1
Safety Precautions
Please observe these precautions fully
Important. Safety Instructions
In order to prevent harm or injury to those using the appliance or to any other persons and/or property, please be sure to read
the following safety instructions.
•
Possible consequences of incorrect usage are laid out in the following pages, each marked with a sign according to the
degree of danger.
Warning
This sign warns of possible death or serious
injury to persons and/or property.
•
Caution
Attention
This sign warns of possible damage or
injury to persons and/or property
This sign warns of steam
which could cause burns
The following signs indicate the dangers, which may lead to injury or damage.
The following signs indicate actions,
which are prohibited.
The following signs indicate actions, which should be
avoided at all costs.
Details of these signs can be found on pages 2-3. Please read them carefully.
Warning
Precaution against burns
During use
Where to position the Flavia®
drinks station SB100
Place out of reach of children.
Children and persons unfamiliar
with the equipment should only use
it under supervision.
To ensure safe removal of hot drinks,
place the equipment no higher than
1.3M (40 1/2”) from the floor. Not
Hot contents - Always use
caution
Never block the steam vent .
Never turn the appliance upside
down.
The lid must always be
properly closed.
Even when the lid is locked, hot
water will leak through the water
outlet and the steam vent if the
appliance is turned upside down,
which may cause burns.
observing these precautions may cause
burns, electric shock and other injury.
Never tilt or shake the
appliance or carry it by the lid,
or by holding the casing.
Preparation
Never overfill with water.
Even when the lid is locked, hot
water will leak through the water
outlet and the steam vent if the
appliance is shaken, which may
cause burns.
Heating water may spill causing burns.
Never heat anything other than
water in the tank.
Never close the lid by force.
Do not heat tea bags, tea leaves, milk,
alcohol, or anything other than water in
the tank. Heating anything but water in
the tank may block up the water tank or
cause serious damage to the tank.
Hot water can spill causing burns.
Rated current 15A
Voltage 120V
Steam vent
Lid
In case the appliance topples
over,
hot water may spill out causing
burns.
Never use without placing
a cup under the water
outlet.
Hot water may splash against
the drip tray causing burns.
After use
Always detach the drip
tray and the lid when
disposing of unused hot
water.
Hot water may get caught in
the lid and drip tray causing
burns.
Maintenance
WARNING - Service Personnel
Pump not grounded - do NOT contact when energized
Power
plug
Hot water button
Casing
Never dip in or apply water
to the appliance.
Protect from This will cause a short circuit.
getting wet
Never use to store ice.
Cord
Condensation will occur, creating a
potential source of electric shock and
malfunction.
Water outlet
Never attempt to dismantle,
repair, or modify the appliance.
Tank
Drip tray
Hot water can heat over causing
burns.
Maximum
water level
Do not
touch
2
2
Any attempt to do so may result in fire
or injury.
• If in need of repair, please contact
your local Flavia ® Beverage Systems
supplier.
Safety Precautions
Please observe these precautions fully
Electrical supply and cord
Never do anything that might cause damage to
the cord or plug,
Make sure the plug is correctly inserted in the power
socket.
An unsafe plug may cause electric shock or generate heat
resulting in fire.
• Do not use a damaged plug or loose power socket.
such as modify them, place hot or heavy objects on
them, bend them, stretch them, or twist them.
If the appliance is used when damaged, electrical short
circuit or fire may result.
• If in need of repair please contact your local Flavia ®
Beverage Systems supplier.
15A/120V socket must not be used with other
appliances.
When used alongside other appliances, heat generated may
result in fire.
• The cord extension of 15A must not be used with other
appliances.
Clean the plug from dust regularly.
Never plug or unplug the appliance with wet hands.
.
A build-up of dust on the plug will attract condensation,
which could cause cable damage resulting in fire.
• Remove the plug and clean with a cloth.
No wet
hands
This may result in electric shock.
Attention
Precaution against burns
Where to position the appliance
Do not place on unstable surfaces or surfaces that
can be affected by heat.
Do not place near walls or furniture.
Steam and heat could damage walls and furniture, causing
a change in color and shape.
The appliance may topple over causing burns.
During use
Do not open the lid while heating water.
Do not remove cup while the beverage is being
dispensed .
Steam can cause burns.
This may cause burns.
Do not touch when the lid is open.
Do not move the appliance when a cup is still on
the cup stand .
This may cause burns.
This may cause burns.
Do not
touch
Do not touch the steam vent.
Do not
touch
Do not touch the hot parts of the appliance during
use and for a short period after use .
This may cause burns. Take special care to prevent
children from touching the steam vent.
Do not
touch
This may cause burns.
Keep Hands clear whilst beverage is being dispensed.
After use
Wait for the appliance to cool before moving it.
When carrying the appliance do not touch the
id handle.
A hot appliance may cause burns.
• Take special care when disposing of unused hot water.
• Remove separator only after it has cooled.
The lid may open causing burns and other injury.
Power cord
Remove the plug from the socket when the
appliance is not in use.
When unplugging the appliance, pull by
the plug – not the cord!
Remove Deteriorating insulation may result in electric
the plug shock and/or fire.
Electric shock and short circuit may result in fire.
3
Before using
Using the appliance for the first time or after a long time
■ Please clean the tank and water contact parts.
How to install.
Plug in the appliance, switch the
power switch to the ON position
and heat water.
Push the drip tray in until a click
is heard.
Light comes on
when water has
heated.
How to insert the mesh filter.
Push onto the pipe at the bottom
of the tank until a click is heard.
Switch off the appliance and leave to cool.
Remove the lid and drip tray.
Swish the active carbon filter
in water.
1 Pull diagonally
?
away by
pressing the
‘pips’ in the
lid handle.
Insert the active carbon filter into the
separator.
Lid
handle
?2 Hold down the
securing catch.
Remove the lid
by pulling by the
lid handle.
Securing catch
How to insert the active carbon filter.
?
1
Push the
spring clip of
the active
carbon filter
into the hole
in the centre
of the
separator.
spring clip
How to remove
the lid.
To replace, push
diagonally in.
When closing, push
into position until
you hear a click.
2 Clip the active carbon
?
filter into the separator
by securing the left and
right clips with the left
and right holders.
Holder
Clip
How to remove
the drip tray.
Hold firmly and
pull out
To remove the filter, press the spring clip in and remove
from the separator.
Insert the separator inside the tank.
How to insert the separator into the tank.
Tank lip
1
?
When inserting the separator
inside the tank avoid touching
the lip.
?2
Once past the lip, bring the
separator into a horizontal
position.
?3
Align the separator indent below
the marker inside the tank.
Dispose of any remaining
hot water through the drain.
Mark inside
tank
Indent
Notice
?4 Turn the separator to the right
until you hear the catch click.
• Make sure to remove the drip tray before disposing of
unused hot water.
Then fix the
marker into
the indent
on the
other side.
Marker
(Water contained in the drip tray can come into contact
with internal electric parts resulting in malfunction).
To remove the separator, turn it to the left and
remove in the reverse order.
Notice
• Do not use the appliance near a
source of fire (this may result in
deformation of the casing).
Fill the tank with water up to the maximum
water level mark.
• Make sure that the separator is
properly inserted in the tank.
(When not properly inserted, the
separator may fall out when
disposing of unused water. Also,
heated water may become
tepid).
• Do not fill with water directly
from the tap. (Water may
overflow coming in contact with
internal electrical parts, which
• As water enters the separator, you will here
the sound of air escaping.
Tank
Maximum water
level
4
4
may result in malfunction).
• Do not leave unused heated
water in the appliance. (Doing so
may result in corrosion to the
tank and in an unpleasant
odour).
• Do not dispose of unused water
on the side of the control panel.
Always use the drain. (Not doing
so can result in malfunction).
• Empty drip tray reqularly. Use
caution when emptying, possible
hot contents.
How to use
Water heating light
• Water is heating.
* Please wait.
Water supply light.
• Water level in the tank is low.
* Please add water.
Remove filterpack
light
• This light will come
on when a used
filterpack is left in
the appliance after
making a beverage.
* Please remove the
filterpack.
Beverage settings lights.
• How to choose between the settings:
Espresso type
For a stronger flavor and for ice drinks
• Volume of water extracted: approx. 3oz
Regular coffee/Standard leaf tea
• Volume of water extracted: approx. 7oz
Instant drink
• Volume of water extracted: approx. 6oz
Note: The volume of water extracted is pre-set.
The volume will vary depending on the type of
beverage and filterpack.
How to heat water
1
2
Fill the tank with water.
Comes on automatically
when water heater starts
operation.
Water
heated
in the
separator.
*Approx.
3 minutes
Plug in the appliance and
turn the power switch on.
Red light
Green light
Time required to make the
first beverage is
approximately 3minutes.
Another cup can be made
as soon as the green light
comes on.
Green light
If a beverage is made
immediately after adding
water to the tank, the
water may not be
sufficiently hot.
Water
heater
*Approx.
25
minutes
Green light
Keep warm mode
* At a room temperature of 20°C and a full tank.
How to make a beverage
Place a cup in the cup stand.
• Recommended cup size to be used with the appliance
is 80mm in diameter and 96mm in height.
Notice Smaller cups and those with a rounded bottom can cause
* ?Press the start button to open the
filterpack holder, re-select your
preferred beverage setting and close
the filterpack holder.
Press the
start button to
splashing when a beverage is dispensed.
• Only use cups suitable for hot drinks.
Start
operation
• Do not use plastic vending cups.
Towards
Select the setting
depending on the
beverage you want.
Towards
again.
The light under the
selected setting will
come on.
When the Remove-filterpack light comes on
Remove cup
Light on
Caution Do not press the start button during brewing.
Notice
• Never use any other setting
but the
with instant
beverage filterpacks.
On the
and
Light on
Completing your beverage
The setting will automatically
return to
after 30 seconds.
? Make your selection
Notice
Light on
• For instant beverage, please stir to fully
dissolve before drinking.
After the beverage is dispensed,
open the filterpack holder and
remove the used filterpack.
settings,
an instant beverage filterpack may burst.
• The filterpack will be hot. Take care when
removing it.
• After the beverage is dispensed, the used filterpack
must be removed. (If the filterpack is not removed,
the beverage making function and hot water
dispensing
function will not operate).
Notice
Press the start button.
Open the filterpackholder.
holder.
Place the filterpack in the
filterpack holder.
Approximately 15 seconds after
closing the filterpack holder, the
‘Removefilterpack’ light will come on.
5
5
When the filterpack is removed -> Close the filterpack
holder and lower the start button into its original position.
How to use
(continued)
Dispensing hot water
Lock
Hot water button
Place a cup on the cup stand.
Release
the lock
Light on
Light on
To dispense hot water
• To dispense hot water, hold down
. The maximum volume dispensed will be approximately 8 oz.
(Hot water will stop running as soon as the touch key is released).
• You can hold down the
while releasing the lock button.
• After you have dispensed hot water, the lock will be automatically reset and the light will be cancelled.
(Even if you haven’t dispensed any water, the lock will be reset automatically after 10 seconds).
If you want to lock the hot water immediately after dispensing hot water ? press
and the light will go out.
? Hot water will not dispense in the following situations:
• While the water is being heated.............................................
• When a used filterpack is left in the filterpack holder
Please wait until the tank is in the keep warm mode.
( Light off)
Remove the used filterpack
( Light off), close the filterpack
holder and lower the start button into the original position.
* Even when the filterpack is removed from the filterpack holder, hot water will not dispense if the filterpack holder is open
or the start button is raised.
Maintenance
Weekly maintenance
Wipe the dust off the casing and
the lid with a well-wrung wet cloth.
• Do not wash with water.
(Water may get into the internal
electrical parts resulting in
malfunction).
• Do not use cleaning agents.
(They may leave traces).
• Do not apply any products containing
benzene to the appliance.
(This may damage the surface of the
appliance).
Wipe the walls of the tank with a wet
cloth.
• Do not clean with brushes or scouring
agents. (This may damage the
surfaces).
Filterpack holder, drip tray and cup
stand should be washed with a wet cloth.
How to remove
?1 Remove the drip tray. ?2 Open the
filterpack holder and push down firmly until
3 Push down again and pull out
fully open. ?
directly downwards.
Pins
How to replace
1 Insert the bottom end of the filterpack
?
holder by pushing diagonally upwards until
secured with the left and right pins on the
body.
?2 Close the filterpack holder.
* When the filterpack holder is put into
position you will hear a loud click.
Bi-monthly maintenance
With use, scale deposits will form on the internal
surfaces. These need to be removed once in
every two months.
Mesh filter and separator should be
cleaned by dipping in water and
agitating.
• Do not use washing up liquid or bleach.
(If this does not prove effective please
use a suitable brush).
If you observe change of color due to scale or a
floating layer in the tank.
Minerals contained in the water may form deposits
on the surfaces with which water comes in contact.
This is not corrosion of the tank itself, nor is the
change in color a change on the tank itself. The
deposits are not harmful. This may take the form of:
• Change of color to milky white, brown or dark grey.
• Rough surfaces or spots of rust.
• White or shiny layer due to mineral crystallisation.
Notice
• Do not put in a dishwasher or dryer of any kind.
(This may result in the casing becoming deformed).
• When storing:
- Dry well.
- Protect from any objects getting into the appliance by
wrapping in plastic.
Sanitising
• After cleaning sanitise exterior surfaces with a non-chlorine based anti-bacterial wipe or solution. Avoid scented products as
this will affect the drink taste .
Storage: When you are not using the appliance for a period of time
1
2
3
4
Check that there is no filterpack left in the filterpack holder
Switch the power switch off and pull the plug out of the socket
Detach the drip tray and remove any water contained in it
Remove the lid and dispose of unused heated water (for the correct way to dispose of unused water please see page 4)
6
6
SB100 DESCALE INSTRUCTIONS
WARNING - DO NOT LEAVE THE BREWER UNATTENDED DURING THIS PROCEDURE
1.
2.
SWITCH OFF BREWER AND DISCONNECT FROM MAINS
4.
Response
EMPTY CONTENTS OF
BREWER INTO SINK
WARNING - WATER MAY BE HOT
REMOVE LID AND CUP STAND
6.
5.
FILL WITH COLD WATER TO MAXIMUM FILL LINE
7a.
CLOSE FILTERPACK HOLDER
DO NOT PRESS START
BUTTON AT THIS STAGE
CONNECT DESCALE TUBING INTO FILTERPACK HOLDER
7b.
WHEN RINSING
AND DRAINING
ENSURE THE
MESH FILTER IS
FITTED TO PREVENT
LOOSE SCALE
FROM ENTERING
PIPEWORK AND
PUMP
3.
Recommended Descale Notes
8.
FLAVIA RECOMMEND RENEGITE (MANUFACTURED BY BRAVILOR
BONAMAT) ALTERNATIVELY USE A DESCALANT AVAILABLE FROM ANY
SUPERMARKET OR DIY STORE SUCH AS 'SCALEAWAY' OR 'OZ' DESCALERS.
A descale kit with instructions is available from FLAVIA Customer Service.
Please use the 'Contact Us' form, located in the Customer Service Section
of www.flavia.net.
CONNECT TUBING
INSIDE TANK
AND SLOWLY
ADD DESCALANT
NOTE: WITH THE ABOVE ALTERNATIVE DESCALANTS, THIS PROCESS MAY
HAVE TO BE FOLLOWED 2 OR 3 TIMES TO SUCCESSFULLY DESCALE YOUR
BREWER.
9.
10.
PRESS AND HOLD
RIGHT HAND ARROW, BUTTON
AND SWITCH ON BREWER
WHILST HOLDING
RIGHT HAND ARROW BUTTON
PRESS LEFT HAND ARROW BUTTON
Response
RE-FIT AND LOWER
LID. DO NOT CLOSE
11.
IF THE TWO RED LIGHTS DO NOT FLASH AS SHOWN,
SWITCH OFF MACHINE FOR MINIMUM OF 10 SECONDS
AND REPEAT STEPS 9 & 10. TWO FLASHING RED LIGHTS
INDICATE THE PROCESS HAS STARTED. AFTER 40 MINUTES
ONE LIGHT WILL CHANGE TO GREEN.
12.
13.
14.
PRESS START BUTTON TO CIRCULATE SOLUTION FOR
TEN MINUTES
A THIRD FLASHING GREEN LIGHT INDICATES
THE SOLUTION IS CIRCULATING
PRESS AND RELEASE START BUTTON TO ABORT CYCLE
15.
WHEN CIRCULATION HAS STOPPED, DO NOT SWITCH OFF MACHINE. CHECK ALL SCALE HAS BEEN REMOVED.
IF NECESSARY, CLOSE PACK DOOR AND PRESS START BUTTONTO RESTART CIRCULATION, THIS MAY BE REPEATED
AS MANY TIMES AS REQUIRED.
WHEN ALL SCALE HAS BEEN REMOVED, EITHER DISCONNECT THE TUBING FROM INSIDE THE TANK (FIG.7A) AND
PRESS THE START BUTTON TO EMPTY TANK INTO A BUCKET OR SINK, OR, SWITCH OFF AND DISCONNECT FROM
MAINS AND POUR AWAY. IN ANY EVENT SWITCH OFF MACHINE FOR AT LEAST 10 SECONDS, FILL WITH COLD WATER
AND REPEAT FROM 9 ABOVE
CAUTION: The use of other descalants other than those specified may cause
damage to your brewer - please read and follow manufacturers instructions
at all times.
PLEASE NOTE: DESCALE TUBING IS REUSABLE
70-40-0410-1
A/W No:1091
SB100 Drink Volume
olume Adjustment Guidelines
G
1. Ensure there is no filterpack in the brewer, the filterpack holder is closed and the
start button is in the down position.
2. Switch off the brewer and leave for approximately 10 seconds.
3. Press and hold left arrow
button and switch on the brewer.
4. Whilst holding left arrow button,
press right arrow button. Release
both buttons.
5. Use the left arrow
button to decrease the
drink volume and the
right arrow button to
increase the drink volume
(see table)
Required
Adjustment
INCREASE
NONE
DECREASE
Button
Number of Approx. drink adjustment Flashing
presses
Indicators
cc/ml
US fl oz
x3
+24
+0.81
x2
+16
+0.54
x1
+8
+0.27
0
0
0
x1
-8
-0.27
x2
-16
-0.54
x3
-24
-0.81
6. Switch off the brewer, leave for approximately 10 seconds and then switch on.
Trouble shooting
Before calling a service supplier,
please check the following possible causes.
If...
Water is not heating.
Possi bl e cause
• The plug may be loose in the socket.
• The power switch may be in the OFF position.
The amount of water
dispensed is too small and/or
is dripping too slowly.
• The mesh filter may be blocked
wi t h scal e.
• The tank and internal parts through which
water flows are blocked with scale.
• Just before and after finishing heating the
delivered volume may be low.
The walls of the tank have
changed color, there is a milky
white layer floating on top of
the water in the tank and/or the
sound of the water when
heating is louder than is usual.
The taste of beverages and
hot water from the appliance
have deteriorated.
• The cause of this are scale deposits.
* Water with a large content of minerals in it such
as mineral water or ionised water, is more likely
to cause a change of color and/or the appearance
of a white layer on the surface of the water.
• The carbon filter may need replacing.
How t o f i x
Firmly insert the plug in the socket.
Put the power switch in the ON position.
Clean the mesh filter with a brush once every
t wo m ont hs. (See page 4& 6)
If this brings no improvement, please
change the filter. (See the back cover)
Please contact your local Flavia ®
Beverage System Supplier.
This is perfectly normal.
Please contact your local Flavia ®
Beverage System Supplier.
Please replace the carbon filter once a year.
(See back cover)
Beverages and hot water from
the appliance have an unpleasant
odour.
• Purifying agents in the water supply can leave traces of odour.
• When the appliance is new, resin used in manufacture may give off a mild odour. This will
disappear with use.
• If the appliance is placed on surfaces such as a vinyl sheet, the odour may be carried over into the water.
• The separator may not be properly inserted.
Correct position of the separator. (See page 4)
Beverages and heated water
are not hot enough.
• Fresh water has been added to the tank in
Keep warm mode immediately before making
a bever age.
To make a beverage, please wait for the green
light to come on. For hot water, please wait
f or t he l i ght t o go of f.
■ When making a beverage
The appliance is not operating
after inserting a beverage
filterpack in the filterpack holder.
(
is lit)
• Allow approximately 15 seconds for the
beverage to be dispensed.
? Press the start button and open the filterpack
holder.
? Re-select the desired beverage setting.
? Close the filterpack holder and press the start button .
The appliance makes a ‘pop’ sound
when the start button is pressed
to start making a beverage.
• On the setting, the filterpack is filled with
air which makes the ‘pop’ sound.
■ When dispensing hot water
Cannot release the lock.
Hot water won’t dispense.
When the
This is perfectly normal
light is green, the lock cannot be released.
A used beverage filterpack may have been left in the
filterpack holder. The ‘Remove-filterpack’ light is on)
Remove the filterpack from the filterpack holder.
close the filterpack holder and lower the start
button into its original position.
The lock may not have been released.
Press the
key. The light will come on
* After the light goes off, the lock will be automatically reset after approximately 10 seconds
The start button may be raised, and/or the
filterpack holder may be open.
Close the filterpack holder and lower the
start button into its original position.
Hot water stops coming out when
the
key is pressed.
When pressed once and held down, the amount of hot water dispensed is equal to approximately 8oz
■ In case you see the following
indicators
is lit
Water supply indicator is working
Both
and
are lit
Fill with water.
• Make sure that the appliance has been filled
with water before turning the power switch on.
• The level of water in the tank may be low.
This may occur temporarily when water is
poured into the tank.
Make sure the tank is filled with water. Turn
the power switch off and turn it back on after
10 seconds.
■ If the following indicators are on, the appliance is malfunctioning.
Two lights are on simultaneously
Please contact your local Flavia ® Beverage System supplier.
and
Advise the supplier which lights are on.
and
and
If the problem is not fixed after checking the above given possible causes, pull the plug out of the socket and contact your lo cal Flavia®
Beverage System supplier.
7
9
Replacement parts and consumable goods
Rubber fitting
The rubber fitting should be
replaced when it loses its
flexibility and steam starts
appearing around the edges
of the closed lid.
• Take out the 3 screws,
remove the lid cover and
replace the rubber fitting.
Mesh filter
The mesh filter should be replaced when scale deposits
can no longer be removed by brushing.
Lid cover
Rubber
fitting
Active carbon filter
Although it will differ depending on water hardness
and usage, in order to maintain its effectiveness, the
active carbon filter should be replaced once a year.
(Based on a usage of
Part
Serial number
20 cups per day).
Rubber fitting
APH65-198-F
Not fitted as standard
Mesh filter
ACD30-135-OU
in Europe.
Active carbon filter ACA95-135-OU
* For any inquiries regarding the parts and orders, please contact your local Flavia ® Drink System supplier.
Specification
Power
Voltage 120V 60Hz
Power consumption
1000W
Weight (approx,)
8lb
Volume
1 gallon
9in
Measure- Width
ments
Depth 13 1/2 in
(approx.) Height 14 1/2 in
Length of cable
59in
Liquid pump (power consumption/period of time) 2W/30s
Air pump (power consumption/period of time)
3W/5s
Safety features
Low-water cut-out. Heat-dry cut-out.
High-pressure cut-out.
* Under certain conditions, such as at very high altitudes and in intense cold, the appliance may not function properly.
Please avoid using the appliance in such conditions.
* If the appliance is not used during cold conditions, make sure to empty it of water. The water left in the tank may freeze causing damage.
Care and
Inspection
Please inspect your Drinks station regularly to ensure many years of faithful service!
Is your appliance showing any of the following signs?
• The power plug and cord heat up easily.
• The cord is damaged and/or power supply is interrupted when the cord is touched.
• The boil mode does not switch to Keep warm mode after 5 minutes of a continuous
stream of steam from the steam vent.
myflavia.com
If your appliance is showing
these signs, stop using it
immediately and arrange an
inspection with your local Flavia ®
Drinks System Supplier.
® 'FLAVIA' ©/™/® MASTERFOODS 2009
CZ45A135
S0999G0