E ADVANTAGE - Enduro™ Elite Motors

nduro
E
TM
ADVANTAGE
Energy saving, dependable and efficient Servo Motors
for commercial sewing machines.
Pays for itself
with the energy
it saves!
The super quiet Enduro™ Advantage SM400 Series Servo Motor
pays for itself with a remarkable 50% to 70% energy savings
compared to clutch motors. With the high and rising cost of
electricity, you just can’t afford to run a clutch motor any longer.
The power and dependability of the brushless EnduroTM Advantage SM400 is adequate for light duty sewing.
www.endurosaves.com
• Ahorra Energia • Económico • Práctico •
End
SM445-1
Servo Motor
El Enduro™ Advantage Serie SM400 de servo un motor comercial ligero
de 0 a 600 vatios con la torsión estándar. Trae una caja de plástico
con un apagador de encendido y apagado, utiliza potentes magnetos
permanentes. El motor no hace ruido, ahorra energía (50-70%) no trae
carbones, ajuste de de velocidad constante. Esto es un motor de esfuerzo
de torsión estándar.
Mediante el uso de un microprocesador moderno tecnológicamente
avanzados, el censor Hall y la tecnología de modulación "Pulse Width", el Enduro SM400™ Advantage se puede configurar para girar a
velocidades máximas diferentes, en ambos sentidos normal o invertida, y
puede comenzar con diferentes velocidades de aceleración. Se detendrá
automáticamente con cualquier interrupción como en el voltaje de línea,
subida de tensión, interferencias de radiofrecuencia o sobrecargas. Se
protege totalmente por el software y da mensajes de error que indica cuál
es el problema que se encuentre. También funciona bien en ambientes
con un suministro de energía eléctrica inestable.
Todos los motores servos de la serie de la Advantage SM400 de Enduro™
utilizan los mismos agujeros de montaje que los motores de embrague
estándar.
110V Single Phase
Cycles: 50/60 Watts: 0 - 600
Torque: 0 - 2.0 Foot Pounds
Variable Speed to 4500 RPM
Features & Settings:
• Motor rotating direction setting
• Slow starting speed
• Maximum speed setting
Supplied with:
• Instruction manual / parts list
• Mounting hardware
• Pulley cover (belt guard)
• 80mm pulley
• Toggle on/off light duty wire
harness with light socket and
fuse
Motor weight: 10 lbs.
Motor dimensions:
10.5” L x 6.5” W x 9” H
Shipping weight: 13.5 lbs.
Shipping dimensions:
14” L x 11.5” W x 10.5” H
• Energy Saving • Economical • Practical •
duro
TM
ADVANTAGE
SM445-2
Servo Motor
220V Single Phase
Cycles: 50/60 Watts: 0 - 600
Torque: 0 - 2.0 Foot Pounds
Variable Speed to 4500 RPM
Features & Settings:
• Motor rotating direction setting
• Slow starting speed
• Maximum speed setting
Supplied with:
• Instruction manual / parts list
• Mounting hardware
• Pulley cover (belt guard)
• 80mm pulley
• Toggle on/of light duty wire
harness with light socket and
fuse
Motor weight: 10 lbs.
Motor dimensions:
10.5” L x 6.5” W x 9” H
Shipping weight: 13.5 lbs.
Shipping dimensions:
14” L x 11.5” W x 10.5” H
The Enduro™ Advantage SM400 Series Servo Motor is a 0 to 600 Watt
commercial light duty motor with standard torque. It has a plastic on/off
toggle switch and light duty wire harness. It utilizes powerful permanent
magnets. The motor produces almost no noise, saves energy (50-70%)
and is brushless, speed adjustable and durable. This is a standard
torque motor.
By using a modern technologically advanced micro-processor,
Hall Sensor and Pulse-Width Modulation technology, the Enduro™
Advantage SM400 can be set to rotate at different maximum speeds,
in either normal or reverse directions, and can start with different
accelerating speeds. It will stop automatically with any interruption
such as in-line voltage, electrical surge, radio frequency interference
or overloading. It is fully protected by the software and will give error
messages indicating which problem is encountered. It even works well
in environments with an unstable electrical power supply.
All Enduro™ Advantage SM400 Series Servo Motors use the same
mounting holes as standard clutch motors.
nduro
E
TM
ADVANTAGE
Energy saving, dependable and efficient Servo Motors
for commercial sewing machines.
Enduro™ Advantage SM400 Series Servo Motors are covered with a 1 year limited warranty. If the motor fails
to perform its designed function due to manufacturer’s defects, contact the place you purchased it from for
repair or replacement. This warranty does not cover defects due to dropping, power surge, spikes or misuse.
Este producto tiene una garantía limitada de 1 año. Si el motor no cumple con su función diseñada por
defectos de fabricación, contacte con el lugar donde lo compró para la reparación o el reemplazo. Esta
garantía no cubre los defectos causados por caídas, subidas de tensión, púas o mal uso.
Dealer Information:
ENADV2012
Copyright © 2012 EnduroTM Servo Motor
www.endurosaves.com