Trans-Atlantico Product Catalog - Architectural Builders Supply Inc.

Transcription

DC-50
COMMERCIAL CLOSER
The DC-50 closer has a cast aluminum alloy body and is
recommended for use on all commercial applications. Closers
with non-hold open arms are UL listed for “A” label fire doors.
Closers have full spring adjustment from sizes 2-5.
Options
BC: Backcheck HO: Hold open
SPC: Packed w/ parrallel arm, cover, and thru bolts. (Size 4 only)
Accessories
Model #
DC-52/53
DC-54/55
Body Length
8⅞”
9¾”
Hole Pattern
8¹/₁₆" x ¾"
9¹/₁₆" x ¾"
DC-HOA50
Hold Open arm
Specifications
•
•
•
•
•
•
•
Grade 2 certified, ANSI/BHMA A156.4
UL listed compliant UL10C for positive pressure
Spring size closers #2, 3, 4, 5
Non handed
Full plastic cover
Warranty: 10 years
Finish: AL, DU
DC-525PABK
Standard
Parallel Arm Bracket
DC-NDP45
Narrow Drop Plate
DC-CO50
Cover
DC-PAHO50
Hold Open
DC-SB25
1¾" Thru Bolts
DC-90
COMMERCIAL CLOSER
The DC-90 closer is identical to the DC50 series with the ability of
spring adjustment. The DC90 series has cast aluminum alloy body
and is recommended for use on all commercial applications. Closers
with non-hold open arms are UL listed for “A” label fire doors. Fully
compliant with opening force requirements for ADA and ANSI/BHMA
standards. Closers have full spring adjustment from size 1 to size 4
for ADA Barrier Free and size 3 for standard size. Optional Tri-pack.
Hole Pattern
9¹/₁₆" x ¾"
Specifications
Accessories
•
•
•
•
DC-HOA50
Hold Open arm
DC-525PABK
Standard
DC-CO50
Cover
DC-SB25
1¾" Thru Bolts
DC-PAHO50
Hold Open
•
•
•
•
•
•
Multi-size springs 1-6 adjustable power ADA compliant
Three independent regulating valves- adjustable control sweep,
latch and backcheck cushion
DC-90BF: Pre-adjusted spring size 2 (ADA)
DC-90: Pre-adjusted spring size 3
Non handed
Slimline plastic cover
Warranty: 10 years
Finish: AL, DU, US3
Options
Meets ADA requirements
1
BF: Barrier Free/ADA BC: Backcheck
DA: Delayed Action
SPC: Packed w/ parrallel arm, cover, and thru bolts.
DC-200
COMMERCIAL CLOSER
The DC-200 is recommended for use on all aluminum store front doors,
wood or hollow metal commercial applications. It is a versatile closer that
provides narrow styling. The DC-201 is a multi-size spring model that offers
adjustable power with a choice of sizes 3-6 where high rates of closing force
are required. The DC-201ADA model also offers adjustable spring power
sizes 1-4 for use on interior doors requiring less than 5 lbs of opening force
and exterior doors requiring less than 8.5 lbs. This complies with ADA
handicap codes and ANSI/BHMA standard requirements.
Body Length
9⅞”
Hole Pattern
9¹/₁₆" x ¾"
•
•
•
•
BC: Backcheck HO: Hold open
Accessories
Specifications
•
•
•
•
•
•
•
•
Options
Aluminum alloy body
Non-handed reversible
Spring size closers #3, 4, 5
Multi-size cosers 1-4, 2-5
DC-201ADA: complies with ADA
Two independent valves control sweep and latch
closing speeds- backcheck optional
Packed standard for regular & top jamb mounting
Wood and machine screws
Warranty: 25 years
Finish: AL, DU
DC-DP1214
Drop Plate
DC-TJ1240
Top Jamb Extender
DC-DP1204
Narrow Drop Plate
DC-COV200
Cover
DC-HOA1245
Hold Open arm
DC-PAB1245
Standard
DC-RA1240
Regular Arm
DC-HOPAB1245
Hold Open
DC-70
HEAVY DUTY GRADE 1
The DC-70 closer has a cast aluminum body and is recommended for use
on heavy duty commercial, architectural, and institutional applications.
It is tri-packed with regular, parallel, and top-jamb mounting. Closers
with non-hold open arms are UL listed for “A” label fire doors. Fully
compliant with opening force requirements for ANSI/BHMA standards.
Hole Pattern
11⅛" x ¾"
Specifications
•
•
•
•
•
•
•
•
Multi-size springs 2-6 adjustable power. Three
independent regulating valves- adjustable control
sweep, latch and backcheck cushion
Pre-adjusted spring size 3
Non handed
Full plastic cover
Warranty: 10 years
Finish: AL, DU, US3
Options
BC: Backcheck HO: Hold open DA: Delayed Action
Accessories
DC-7009
Drop Plate
DC-7003
Hold Open arm
DC-7006
Hold Open
DC-SB25
1¾" Thru Bolts
2
DC-831/851
HEAVY DUTY GRADE 1
The DC-851/831 closer has a cast aluminum alloy body and is
recommended for use on heavy duty commercial, architectural, and
institutional applications. It is tri-packed with regular, parallel, and topjamb mounting. Closers with non-hold open arms are UL listed for “A”
label fire doors. Fully compliant with opening force requirements for ADA
and ANSI/BHMA standards. Closers have full spring adjustment from
sizes 1-6 and are pre-adjusted to size 3.
Specifications
Accessories
DC-DP851
Drop Plate
DC-DP851W
Wide Drop Plate
DC-7006
Hold Open
•
•
•
•
DC-7003
Hold Open arm
•
•
•
•
•
•
DC-SB25
1¾" Thru Bolts
Hole Pattern
12" x ¾"
Three independent regulating valves- adjustable control
DC-851 standard series
DC-831 slimline series
Non handed
Full plastic cover
Warranty: 25 years
Finish: AL, DU
DC-4361
HEAVY DUTY GRADE 1
The DC-DX4361 is recommended for use on heavy duty commercial
and institutional applications. It is tri-packed standard and comes
with all necessary fasteners, brackets, and soffit plates for versatility.
Closers with non-hold open arms are UL listed for "A" label fire
doors. Fully compliant with opening force requirements for ADA and
ANSI/BHMA standards.
DC-DP436118PA
Drop Plate
Parallel arm
DC-RA4361CNS
Cushion Arm
DC-RA4361HD
Heavy Duty Arm
DC-PAB4361
•
•
•
•
DC- RAHOA4361
Hold Open arm
DC-SB25
1¾" Thru Bolts
•
•
•
•
•
Tri-packed: regular pull side, top jamb, parallel arm
Aluminum alloy shell
Non handed
Warranty: 25 years
Finish: AL, DU
Options
CNS: Cush Action CAHO: Hold open cush
3
7½" x 1"
Specifications
Accessories
DC-DP436118
Drop Plate
Pull Side
Hole Pattern
DC-CTP40
EXTRA HEAVY DUTY GRADE 1
Hole Pattern
The DC-CTP40 closer has a cast iron body and is recommended for use
on heavy duty commercial, industrial, and institutional applications. It is tripacked with regular, parallel, and top-jamb mounting. Closers with non-hold
open arms are UL listed for “A” label fire doors. Fully compliant with opening
force requirements for ADA and ANSI/BHMA standards. Closers have full
spring adjustment from sizes 1-6 and are pre-adjusted to size 3.
5" x 2¾"
Accessories
Specifications
•
•
•
•
•
•
•
•
Non handed
Full plastic cover
Warranty: 25 years
Finish: AL, DU, US3
DC-DP1840
Drop Plate
Pull Side
DC-HO40
Hold Open Arm
DC-DP18PA40
Drop Plate
Parallel Arm
DC-CA40
Cush Arm
DC-DP18G40
Drop Plate
Top Jamb Drop
DC-CAHO40
Hold-Open Cush
DC-DP18TJ40
Back Plate
Top Jamb Mount
DC-SB25
1¾" Thru Bolts
ORDER SPECIFICATIONS
PRODUCT DESCRIPTION AND CODING
SECTION
DC
SERIES
90
-
CTP40
SPRBC70
851/831
90
50
OPTION
BF
FINISH
-
AL
Back check: BC
Barrier Free: BF
Delayed Action: DA
Door Closer
Aluminum Painted- AL
Duronodic Painted- DU
Polished Brass- US3
4
DOOR CLOSER
MODEL SELECTION
DOOR SIZE
WEIGHT
CLOSER SIZE
44" Interior 36" Exterior
243 lbs.
Adjustable 1-4
258 lbs.
Adjustable 2-5
155 lbs.
3
243 lbs.
4
250 lbs
5
32" Interior
137 lbs.
2
155 lbs.
3
243 lbs.
4
250 lbs.
5
258 lbs.
Adjustable 3-6
243 lbs.
Adjustable 1-4
DC-70
225 lbs
Adjustable 2-6
DC-851
225 lbs.
Adjustable 1-6
DC-831
225 lbs.
Adjustable 1-6
DC4361
258 lbs.
Adjustable 1-6
DC-CTP40
258 lbs.
Adjustable 1-6
DC-200
DC-50
DC-90
ADA handicap standards state doors require less than 5lbs of opening force for
interior doors and 8.5 lbs. for exterior doors. Commercial door closers which
feature adjustable spring power sizes 1-4 comply with these standards.
5
DOOR CLOSER
COMPARISON CHART
TACO
LCN
NORTON
DORMA
DOR-O-MATIC
FALCON
RIXSON
SARGET
YALE
CORBINRUSSWIN
ARROW
DC-50
NA
9300
NA
SC90
NA
NA
1100
NA
NA
DC-90
NA
9300
NA
SC90
NA
NA
1100
NA
NA
DC-200
1370, 1070
*1260
1600
7300/7400
SC60/61
NA
1130
50/51
NA
DC300 900N
DC-70
NA
210
8600
SC80
NA
1331
2700
NA
5016N
DC-831
NA
8301
8600
SC80
NA
1431
3301
DC3000
5016N
DC-851
NA
8501
860
SC80FC
NA
1431
3501
DC3000
5016N
DC-4361
1460
NA
NA
NA
NA
NA
NA
DC3000
NA
DC-CTP40
4040
7500/7700
8916
SC71
NA
351
5800
DC8000
DC500
TACO
CAL-ROYAL
INTERNATIONAL
GLOBAL
RYOBI
SENTINEL
S. PARKER
TAYMOR
CRL
DC-50
400
800, 8000
TC2200
D-1550
5000
530, 815,
950
600/690
800/1900
DC52/55
DC-90
400
800, 8000
TC2200
D-1550
5000
530, 815,
950
600/690
800/1900
DC52/55
DC-200
300,700
1800, 8900
TC200
NA
N/A
NA
NA
PR40/42
DC-70
900
9000
TC600
D-3550
NA
BF900
NA
PR70BF
DC-831
CR801S
5050
TC400
D-3550
9016
NA
NA
PR50
DC-851
CR801
5000
TC500
D-3550
NA
NA
NA
PR52
DC-4361
NA
NA
TC4361
NA
NA
NA
NA
NA
DC-CTP40
CR441
44CI
TC4300
NA
4016
441
NA
PR90
6
Trans-Atlantic Co.
Architectural Catalog
www.transatlanticco.com
Tel: 800.523.9956
Fx: 800.531.0844
ED-600
HEAVY DUTY RIM EXIT DEVICE
The ED-600 series "rim type" exit device is suitable for all doors
(aluminum, hollow metal, or wood) where there is no projection
on the face. It is appropriate for all heavy duty commercial and
industrial applications. Fits doors up to 48".
•
•
•
•
•
•
•
•
•
Specifications
ANSI A156.3 Grade 1
ED-F600: UL10C Fire rated; barrier
XL: doors up to 48"
Non-handed
Door width: up to 36"
Comes with standard strike and shim
Dogging standard ONLY on non-UL fire rated
Warranty: 10 years
Accessories
ED-LV610
Passage
Finishes: AL, DU, US32D
ED-VR600
HEAVY DUTY SURFACE VERTICAL ROD
ED-THEX600
Entry Handleset
w/ Thumbturn
ED-KB680
ED-LV680
Storeroom
ED-KB600
ED-LV600
Entry
ED-ESEX600
Entry Handleset
w/ Thumbturn
ED-0SEX600
Overlapping
Strike
ED-SF1
Strike Filler
ED-RC051
Rim Cylinder
ED-LF1
Latch Filler
The ED-VR600 panic device blends the utility of a vertical rod
application with the appearance of a modern style panic device.
it is non-handed and reversible with a contoured cross bar that
will fit doors up to 36". Suitable for heavy duty commercial and
industrial applications.
Accessories
Specifications
•
•
•
•
•
•
•
•
•
•
ANSI A156.3 Grade 1
ED-FVR600: UL10C Fire rated; barrier
Non-handed
XL: doors up to 48"
12" Extension Rod available
Warranty: 10 years
Finishes: AL, DU
1
ED-LVEX610
Passage
ED-PS09
Overlapping
Strike
ED-KB600
ED-LV600
Entry
ED-KB680
ED-LV680
Storeroom
ED-RC051
Rim Cylinder
ED-501
HEAVY DUTY RIM EXIT DEVICE
The ED501 series "rim type" exit device is suitable for all doors
(aluminum, hollow metal, or wood) where there is no projection
on the face. It is appropriate for all heavy duty commercial and
industrial applications. Fits doors up to 36" and XL for 48".
•
•
•
•
•
•
•
•
•
•
Specifications
ANSI A156.3 Grade 1
ED-F501: UL10C Fire rated; barrier
Non-handed
EAK500: Alarm kit
Available in XL for 48"
Warranty: 1 year
Accessories
ED-BKL510
ED-LHL510
Passage
ED-BKL500
ED-LHL500
Entry
ED-BKL580
ED-LHL580
Storeroom
ED-RC051
Rim Cylinder
Finishes: AL, DU, US32D
ED-PP05
Pull Plate
w/ cyl. hole
ED-PP06
Pull Plate
EAK500
Alarm Kit
ED-PS09
Overlapping
Strike
ED-SF1
Strike Filler
ED-LF1
Latch Filler
ED-VR531
HEAVY DUTY SURFACE VERTICAL ROD
•
•
•
•
•
•
•
•
•
•
•
Specifications
ANSI A156.3 Grade 1
EDFVR531: UL10C Fire rated; barrier
Door width: 36"
XL: doors up to 48"
EAK500: Alarm kit
Doors height: 7'
Warranty: 1 year
Finishes: AL, DU
The EDVR531 panic device blends the utility of a vertical rod
application with the appearance of a modern style panic device. it
is non-handed and reversible with a contoured cross bar that will
fit doors up to 36"-48". Suitable for heavy duty commercial and
industrial applications.
Accessories
ED-BKL510
ED-LHL510
Passage
EAK500
Alarm Kit
ED-BKL500
ED-LHL500
Entry
ED-PS09
Overlapping
Strike
ED-BKL580
ED-LHL580
Storeroom
ED-SF1
Strike Filler
ED-RC051
Rim Cylinder
ED-LF1
Latch Filler
2
ED-301
NARROW STILE
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Specifications
ANSI A156.3 Grade 2
Contoured aluminum
Stainless Steel springs
Latch Case: 1¼" w x 7¼" l with ½" throw
Backset: 1 5/32"
Strike: rim mounted roller strike with shim
Projection: 4½"
Stile: 2" minimum
Non handed
Door thickness: 1¾" standard
and shoulder mounting studs with set screws.
Thumbturn dogging
Warranty: 1 year
Finishes: AL, DU
The ED-301 "crash bar" style exit device are suitable for narrow,
medium, or wide stile aluminum and hollow metal doors. It is
designed for all heavy duty commercial and industrial applications.
It is non-handed with a contoured cross bar that will fit doors up
to 36" and can be field measured to accommodate narrow doors.
Accessories
ED-BKL510
ED-LHL510
Passage
ED-RC051
Rim Cylinder
ED-BKL580
ED-LHL580
Storeroom
ED-BKL500
ED-LHL500
Entry
ED-PS08
Overlapping
Strike
ED-SF1
Strike Filler
ED-LF1
Latch Filler
ED-VR331
VERTICAL SURFACE ROD
The ED-VR331 panic devices blend the utility of a vertical rod
application with the appearance of a traditional panic device. it
is non-handed and reversible with a contoured cross bar that
will fit doors up to 36".
Accessories
•
•
•
•
•
•
•
•
•
•
•
Specifications
ANSI A156.3 Grade 2
Contoured aluminum
Interlocking top and pullman bottom latch
Non handed
Door thickness: 1¾" standard
Door height: up to 7'
Fasteners: furnished with sheet metal, machine
screws and shoulder mounting studs with set screws.
Warranty: 1 year
Finishes: AL, DU
ED-BKL510
ED-LHL510
Passage
ED-RC051
Rim Cylinder
ED-BKL500
ED-LHL500
Entry
ED-PS08
Overlapping
Strike
3
ED-SF1
Strike Filler
ED-BKL580
ED-LHL580
Storeroom
ED-LF1
Latch Filler
ED-STED
HEAVY DUTY RIM EXIT
•
•
•
•
•
•
•
•
•
•
•
•
•
Specifications
A156.3 Grade 2
Narrow Stile
Includes rim cylinder
Underwriter's Laboratories Inc. Listed Panic
Hardware
Requires a 2" mounting surface for typical use
with narrow, medium, and wide style aluminum
doors, hollow metal or wood doors.
Non-handed
Latch bolt throw ⅝"
Dogging by hex key in touch bar
Outside latching with standard rim cylinder
Standard units for 36" and 48"
Can be used for 30" doors
Warranty: 10 years
FInishes: AL, DU
The ED-STED narrow stile "rim type" style exit device is stuiable
for all doors where there is no projection on the face. Manufactured
of extruded anodized aluminum, the ED-STED is durable enough
for the most demanding applications. A rim cylinder is included.
Accessories
ED-RC051
Rim Cylinder
ED-STEDPULL
Aluminum Pull
ED-STEDCVR
CONCEALED VERTICAL ROD
The ED-STEDCVR narrow stile "concelaed vertical rod"
style exit devices are suitable for all doors where there is no
projection on the face. Manufactured of extruded anodized
aluminum, the ED-STEDCVR is durable enough for all
applications.
•
•
•
•
•
•
•
•
•
•
•
•
•
Specifications
A156.3 Grade 2
Narrow style
Includes mortise cylinder and mounting pad
Underwriter's Laboratories Inc. Listed Panic
Hardware
Fore use with narrow, medium, and wide
stile aluminum doors
Non-handed
Outside latching and dogging by cylinder
key or dogging by hex key in touch bar
Unit uses standard mortise cylinder with MS
type cam
Standard units for 36" and 48" door widths
Can be field sized up to 84" in height
Can be used with 30" wide doors
Warranty: 10 years
Finishes: Al, DU
Accessories
ED-TH1100-BC
Mortise Cylinder
ED-STEDPULL
Aluminum Pull
CYLINDER MOUNTING PAD
with locking ring
4
ED-1100
NARROW STILE
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Specifications
A156.3 Grade 2
Contoured anodized aluminum cross bar
Latch Case: 1¼" w x 7¼" l with ½" throw
Backset: 1 5/32" from edge of door to center line
Strike: rim mounted roller strike with shim
4¾" projection
1⅞" minimum stile
Handed. Must specify LH or RH
Door thickness: 1¾"
Up to 42" wide door
Field sizing ability
Recommended installation at 39 13/32" from floor
to center line of latch assembly
Furnished with sheet metal, machine screws
Accepts rim cylinder only
Dogging: inside- push up dog pin rotate with
screwdriver
Warranty: 10 years
FInishes: AL, DU
The ED-1100ED "crash bar" style exit devices are suitable for
narrow, medium, or wide stile aluminum and hollow metal doors. It
is handed with a contoured cross bar that will fit doors up to 42"
wide and can be field sized to accomodate narrow doors.
Accessories
ED-1100PLED
Pull Plate
w/ cyl. hole
ED-1100PLDUM
Pull Plate
ED-1100PLEO
Exit Only Plate
ED-RC051
Rim Cylinder
ED-1100CVR
CONCEALED VERTICAL ROD
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
5
Specifications
A156.3 Grade 2
Contoured anodized aluminum cross bar
Latch Case: 1¼" w x 7¼" l
Backset: Center template
Strike: flat mortise
4¾" projection
1⅞" minimum stile
Handed. Must specify LH or RH
Door: 1¾" thick, 7' hieght
Up to 42" wide door
Field sizing ability
Recommended installation at 35 11/16" from floor
to center line of latch assembly
Furnished with sheet metal, machine screws
Accepts mortise cylinder
Dogging: inside- push up dog pin rotate with
screwdriver
Warranty: 10 years
FInishes: AL, DU
The ED-1100CVR panic device blends the utility of a vertical rod
application with the appearance of a tradtional panic device. It is
non-handed and reversible with a contoured cross bar that will fit
doors up to 42" wide and can be field sized to accomodate narrow
doors.
Accessories
ED-TH1100-BC
Mortise Cylinder
ED-1100CVRPAD
Cylinder Mounting
Trim
EXIT DEVICE
COMMERCIAL COMPARISON CHART
ANSI GRADE
MATERIAL
INTERN
TELL
S.PARKER
CRL
A156.3- Grade 1
Steel
ED-600
8600
9500
NA
NA
A156.3- Grade 1
Steel
ED-VR631
86305
9400
NA
NA
A156.3- Grade 1
Steel
ED-501
55105
8300
VL520
NA
A156.3- Grade 1
Steel
ED-F501
5510F
F8300
52024
NA
A156.3- Grade 1
Steel
ED-VR531
55305
8400
520V
NA
A156.3- Grade 1
Steel
ED-FVR531
5530F
F8400
5203V
NA
A156.3- Grade 2
Steel
ED-301
NA
NA
NA
NA
A156.3- Grade 2
Steel
ED-VR301
NA
NA
NA
NA
A156.3- Grade 2
Steel
ED-STED
56105
NA
NA
35A
A156.3- Grade 2
Steel
ED-VRSTED
NA
NA
NA
3347A
A156.3- Grade 2
Aluminum
ED-1100ED
NA
NA
NA
NA
A156.3- Grade 2
Aluminum
ED-11OOCVR
NA
NA
NA
NA
EXIT DEVICE
HANDING DIAGRAM
Inside
LH Outside
Left hand
Inside
Outside
Inside
Right hand
Inside
Outside
LHR Left hand, Reverse bevel
RH
RHR
Outside
Right hand, Reverse bevel
6
Trans-Atlantic Co.
Tel: 800.523.9956
Fx: 800.531.0844
Trans-Atlantic offset pivots are used for both flush face frame
installations and ⅛" recessed door applciations. Pivots replace most
major door manufacturers. Suitable for aluminum doors weighing up to
125 pounds. Pivots are engineered and designed for durability, style,
and are easy to install.
To order pivots: OFFSET PIVOTS
STOREFRONT HARDWARE
For LHRB door order RH pivot
For RHRB door order LH pivot
SF-OP27/31
ARCH/VISTAWALL STYLE
Specifications
•
•
•
•
•
•
•
•
•
•
¾" offset pivots for aluminum door and frames
For flush door/frame and ⅛"recessed door
applications
Weather resistant
Aluminum case construction
⅛" vertical adjustment
Full race ball bearing and design provides
smooth operation on pivot door portion
No sag, entire weight of doors rests on floor
mounted pivot portion
Completely temper proof, yet easily removable,
replaceable in unlocked position.
Top portions of Arch/Vistawall available
separately
Finishes: AL, DU
SF-OP27
Non-Handed
SF-OP31
Handed
SF-OP34
US ALUMINUM STYLE
Specifications
•
•
•
•
•
•
•
•
•
•
1
applications
Weather resistant
Handed (must specify Right or Left)
Finishes: AL, DU
SF-OP34
Trans-Atlantic offset pivots are used for both flush face frame
installations and ⅛" recessed door applciations. Pivots replace
most major door manufacturers. Suitable for aluminum doors
weighing up to 125 pounds. Pivots are engineered and designed
for durability, style, and are easy to install.
To order pivots: OFFSET PIVOTS
STOREFRONT HARDWARE
For LHRB door order RH pivot
For RHRB door order LH pivot
SF-OP40
ARMALITE STYLE
Specifications
•
•
•
•
•
•
•
•
•
•
•
applications
Weather resistant
Top portions of Armalite available separately
(non-handed).
Finishes: AL, DU
SF-OP40
Armalite
SF-OP41
PITTCO STYLE
Specifications
•
•
•
•
•
•
•
•
•
•
applications
Weather resistant
No sag, entire weight of door rests on floor
mounted pivot.
Finishes: AL, DU
SF-OP41
Pittco
2
OFFSET PIVOTS
STOREFRONT HARDWARE
Trans-Atlantic offset pivots are used for both flush face
frame installations and ⅛" recessed door applciations. Pivots
replace most major door manufacturers. Suitable for aluminum
doors weighing up to 125 pounds. Pivots are engineered and
designed for durability, style, and are easy to install.
SF-OP50
ALDORA STYLE
Specifications
•
•
•
•
•
•
•
•
•
•
applications
Weather resistant
No sag, entire weight of door rests on floor
mounted pivot.
Finishes: AL, DU
SF-OP50
Aldora
SF-OP51
YKK STYLE
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
For new or replacement on YKK metal frame door hinges
Flush frame and ⅛" recessed store front
Die cast aluminum
Full race ball bearing and oilite bronze bushing
Weather resistant
Door weight: up to 125 pounds
Vertical adjustment ⅛"
No sag, entire weight of doors rests on floor mounted pivot
Completely temper proof
Five piece set sold together
Specifcy handing
Finish: Al, DU
SF-OP51
YKK
3
SF-OPKTP/OPKBP
KAWNEER TOP AND BOTTOM PIVOT
Trans-Atlantic offset pivots are used for both flush face
frame installations and ⅛" recessed door applciations.
Pivots replace most major door manufacturers. Suitable
for aluminum doors weighing up to 125 pounds. Pivots are
engineered and designed for durability, style, and are easy
to install.
SF-OPKTP
Kawneer Top Pivot
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
A380 Precision diecast aluminum
Oilite bronze bushing in top frame portion
Full race ball bearing bottom door portions
Door height adjustable by bottom door portion
Door weight: up to 125 pounds
Vertical adjustment: ⅛"
Case hardened stud in floor/jamb position
Includes steel reinforcement plates for the door portions
Top and bottom pivots sold separately
SF-OPKTP: Top pivot. Nonhanded
SF-OPKBP: Bottom pivot. Handed (must specify LH or RH)
Finishes: AL, DU
SF-OPKBP
Kawneer Bottom Pivot
Thrust bearing
DELUXE HINGE KIT
DH-XH5
Roller bearing
The DH-XH5 Deluxe Hinge Kits are the ideal choice for
multiple application door solutions, when existing hardware
fails. A quick and easy fix for any compromised opening.
•
•
•
•
•
•
•
•
•
•
•
Specifications
For commercial doors up to 500 lbs
Non handed
Flush or ⅛" offset door applications
High-tensile aluminum alloy
Self-lubricating pin rotates on anti-friction bearings
Securely fastened with tamper proof screws
Vertical adjustment screw
Door easily serviced
Packed and sold in pairs
1 year warranty
Finishes: US28, DU
Vertical
Adj. Screw
•
•
•
•
•
•
Rotating Hinge Pin
Deluxe Hinge Kit comes with:
(2) roto pin hinges
(12) one-way screws
(4) cover strips
(1) Allen wrench for vertical adjustment
(2) ⅛" shims for flush door applications
(1) instruction sheet
4
INTERMEDIATE PIVOTS
STOREFRONT HARDWARE
Trans-Atlantic intermediate pivots are intended for taller doors that
require additional support to keep the middle part of the door in
line with the pivot hinges at the top and bottom. Intended to be
used for both flush face frame installations and ⅛" recessed door
applications. The pivots cannot be used on center hung doors.
Suitable for aluminum doors weighing up to 125 pounds. Our pivots
are engineered and designed for durability, style, and are easy to
install.
Specifications
•
•
•
•
•
•
•
•
¾" offset application for aluminum doors and frames
Precision aluminum die cast
Doors up to 90" in height should use one intermediate
pivot. We recommend another intermediate pivot for
each additional 30"
Full race ball bearing backened by an oilite bronze
bushing in the door portion.
Case hardened pin to jamb portion fully retractable for
ease of installation.
Door thickness: 1¾"
Easy vertical adjustment
Please specify handing for SF-IP90
SF-IP10
INTERMEDIATE PIVOT
SF-IP20
ARCH/ALMARLITE STYLE
SF-IP90
INTERMEDIATE PIVOT
5
SF-IP30
KAWNEER STYLE
REINFORCEMENT PLATES
STOREFRONT HARDWARE
Trans-Atlantic reinforcement plates are designed
to bring extra security and stability to the surface
mounted hardware of commercial doors. Plates
are intended to be used as a backing plate for 4½"
standard butt hinges on most doors.
SF-RP951-TUL
951 TUL MODEL
Specifications
•
•
•
•
•
•
•
Made from highest quality materials
Functions as backing plate for butt hinge
Increases sag resistance, rigidity
Installation for wood, hollow metal and/or
aluminum commercial door applications.
Plates 3/16" thick
Solid individually
Silver metallic finish
SF-RP124-FZCP
951 A MODEL
SF-RP124D-DZCP
SF-RP124D-2ZCP
SF-RP124D-3ZCP
SF-RP124D-4ZCP
951 P MODEL
951 UJ MODEL
951 U MODEL
951 TU MODEL
6
DOOR ACCESSORIES
STOREFRONT HARDWARE
SF-195/196
FLUSH BOLTS
Mortise flush bolt for use on all commercial store front and
architectural aluminum and glass narrow stile doors. Made
for easy installation, replaces most brands of store front
flush bolts.
Specifications
•
•
•
•
•
•
•
Spring loaded lever action
Rod extension: ⅞" throw
Backset: ⅞"
Face plate: 15/16" and 4 ½" with 5/32" radius
corner
Square ½" nylon tip with beveled corners to
prevent binding
Supplied with nylon keeper and fasteners
Finishes: AL, DU
Rod length and offset:
•
•
SF-195: 10" long with ⅛" offset (standard model)
SF-196: 10" long with ¼' offset
SF-DPB/OPB
PULL BARS
Specifications
•
•
•
•
•
•
•
•
Push bar length: 33"
Pull bar height: 10"
Bar width: 3 ¼"
Mounting diameter: 1"
Projection: 2½"
Meant for standard 1¾" doors
Attractive design combinations increase usability for people of all heights
Finishes: Al, DU
SF-OPB
Offset Pull Bar
SF-DPB
Dual Pull Bar
7
MORTISE LOCKS
NARROW STILE
SF-DB3200 Series
Deadbolt
Function
SF-HL3200 Series
Hookbolt
Backset
Case Depth
Latchbolt
/ " , 1⅛"
1.62" on 31/32" backset
1.78" on 1⅛" backset
⅝" x 1⅜" with 1⅜" throw
/ " , 1⅛"
1.62"
⅝" x 1⅜" with 13/16" throw
/ " , 1⅛"
1.63" - 1.78"
⅝" x 1" with ½" throw
/ " , 1⅛"
1.63" - 1.78"
⅝" x 1" with ⅝" throw
Deadbolt
31 32
Hookbolt
31 32
Deadlatch- DL3200
31 32
Deadlatch- DL4700
31 32
SF-DL3200/4700 Series
Deadlatch
Specifications
•
•
•
•
•
•
•
Three functions: deadbolt, hookbolt, deadlatch
Available backsets: 31/32" , 1⅛"
Face plate: 1" w x 6⅞" L; aluminum
Case dimensions: ⅞" w x 6" l x depth (see chart)
Non-handed and reversible
Deadlatches: zinc alloy latchbolt with Delrin plastic
insert, auxiliary bolt zinc diecast, deadlocks
latchbolt and prevents manipulation.
Finishes: AL/DU
FACE PLATES
Flat
Radius
Radius w/ Weather Strip
Left Bevel
Right Bevel
SF-FPDB
SF-RPDB
SF-WPDBLH/RH
SF-BPDBLH
SF-BPDBRH
SF-FPDL
SF-RPDL
SF-WPDLLH/RH
SF-BPDLLH
SF-BPDLRH
SF-FPHL
SF-RPDB
SF-WPDBLH/RH
SF-BPDBLH
SF-BPDBRH
Specifications
•
•
•
Unless specified, will be supplied with flat face plate
All Radius faceplates with weather strips are handed
Finishes: AL, DU
8
CYLINDERS
COMMERCIAL GRADE MORTISE CYLINDERS
Mortise Cylinder
Thumbturn Cylinder
Rim Cylinder
ED-RC051
Dummy Cylinder
Part
Description
Keyways
Keyed
Finishes
Cam
Packed
DL-CYLTA550
1" Mortise Key Cylinder
5 pin tumbler, solid brass
Y-K-S-A-N
KD, KA2,
KA50, MK
Al, DU,
US3, 26D
A, C
1-2/box
150/case
DL-CYLTA555
5 pin tumbler, diecast
Y-K-S-A-N
KA2, KA50,
MK
Al, DU,
US3, 26D
A
2/box
150/case
DL-CYLTA560
1⅛" Mortise Key Cylinder
Y-K-S-A-N
KD, KA50
Al, DU,
US3, 26D
C
1/box
150/case
DL-CYLTA580
1¼" Mortise Key Cylinder
KD, KA50
Al, DU,
US3, 26D
C
1/box
150/case
DL-CYLTA570
1" Mortise Thumbturn Cylinder
Solid brass
Al, DU,
US3, 26D
A
1/box
150/case
DL-CYLTA577
Diecast
Al, DU,
US3, 26D
A
1/box
150/case
DL-CYLTA595
1" Mortise Dummy Cylinder
Solid Brass
Al, DU,
US3, 26D
1/box
150/case
ED-RC051
1" Rim Cylinder
Solid Brass
US26D,
DU
10/box
50/case
Y-K-S-A-N
S
KD, KA
KEYWAY CODE
•
•
•
S: Schlage C
A: Arrow
Y: Yale 8
KEYING
•
•
•
•
•
2 keys per cylinder
KD: Keyed different
KA: Keyed alike
KA2: Keyed alike; groups of 2
MORTISE CYLINDER GUARDS
DL-HSTMCR
Anti-wrench
cylinder guard
•
•
DL-NFSB
Cylinder Space Ring
1⅜" x ¼"
For use with deadlatch
Double strike to be used when
converting a narrow stile lock to a
deadlatch, to cover elongated slot
in aluminum frame.
DL-FSB
1¾" Standard
Cylinder Ring
DL-SBNRCR
Non-recessed
⅜" solid extruded
SF-DSL1
SINGLE STRIKE
9
•
•
For use with mortise cylinder
Finishes: AL, DU, US3, 26D
SF-DSL2
DOUBLE STRIKE
PUSH PADDLE
SF-EPP496
For use with the SF-DL3200/4700 deadlatch mortise
lock. Paddle is four way reversible. Handing can be
reversed on cam plug by removing the C-clip and
flipping the cam over and reinstalling C-clip.
Specifications
•
•
•
•
•
•
•
Paddle: extruded aluminum
Housing: zinc alloy, black hard coat finish
Operating assembly: steel mechanism
Specify handing: RH/LH
Paddle reversible
Standard packing: paddle arm, operating housing, binder
posts, cam plug, self adhesive decals, and mounting hardware
Finishes: AL, DU
Type
Operation
Use
PULL- left hand
Outside of left hand reverse
door or inside of right hand
PUSH- left hand
Outside of left hand door or
inside of right hand reverse.
PULL- right hand
Outside of right hand reverse
door or inside of left hand.
PUSH- right hand
Outside of right hand door or
inside of left hand reverse
LEVER HANDLE
SF-LH4560 LEVER
For use with our SF-DL3200/4700 deadlatch mortise lock
or any other brand of narrow stile mortise deadlatch.
Lever is four-way reversible. Handing can be reversed on
cam plug by removing C-clip and flipping the cam over
and reinstalling C-clip. Cam plug is secured to lever by 2
hardened steel pins. Cam plug locks into deadlatch by use
of set screw in deadlatch.
Specifications
•
•
•
•
•
•
•
Lever: aluminum alloy cast
Escutcheon: Aluminum 1⅜" x 4", heavy duty spring mechanism prevents sagging of lever handle
Spindle: wrought steel, ¼" square hardened heat treated
Handing: reversible, non-handed
Operation: turning lever downward will active deadlatch
Standard package: Cam plug included, all mounting screws,
templates, and installation instructions.
Finishes: AL, DU
10
Trans-Atlantic Co.
Tel: 800.523.9956
Fx: 800.531.0844
FULL MORTISE
GEARED CONTINUOUS HINGE
Specifications
•
•
•
•
•
•
•
•
•
•
•
Available in full mortise and surface mount
6063 T6 Aluminum alloy, with interlocking
extrusions
Non-handed design
83" or 95" length
Standard duty with 16 thrust type self-lubricating
concealed bearings per hinge
Heavy duty with 32 thrust type self-lubricating
concealed bearings per hinge
High degree of security
Anodized aluminum after machining
Through bolt and machine screws fixing
Templated hole patterns
10 year warranty
GHMT24
GHMT10
3/4”
11/16”
DH-1183CFM
21/32”
CFM
•
•
•
•
1-19/32”
1/16”
Mortise type
Flush mount
1-29/32”
Each hinge leaf has an alignment stop
¼" clearance between door and frame
5/16” Square
1/4”
Edge Clearance
GHMT24
GHFS21 3/4”
11/16”
1-5/8”
1-9/32”
25/32”
29/32”
DH-1183FM2
25/32”
3-1/16”
1/16”
1-29/32”
1/32”
FM2
•
•
•
•
GHFS30
3-3/16”
1-5/32”
25/32”
Mortise type
1/16"19/32”
door offset
Door edge guard
5/16" clearance between door and frame
1-7/16”
1/16”
5/16” Square
Edge Clearance
1
GHFS30
1/32”
7/
GHMT10
•
•
•
•
•
•
GEARED CONTINUOUS HINGE3/4”
21/32”
Specifications
•
•
•
•
•
FULL SURFACE
GHMT24
11/16”
Available in full mortise and surface mount
6063 T6 Aluminum alloy, with interlocking extrusions
Non-handed design
83" or 95" length
1-19/32”
Standard duty with 16 thrust type
self-lubricating concealed
bearings per hinge
Heavy duty with 32 thrust type self-lubricating concealed
bearings per hinge
High degree of security
Anodized aluminum after machining
Through bolt and machine screws fixing
1/4”
Templated hole patterns
10 year warranty
1-29/32”
5/16
Edg
GHFS30
GHFS21
3-3/16”
3-1/16”
1-5/8”
1-9/32”
25/32”
DH-1183
GHMT24
25/32”
3/4”
29/32”
1
FULL SURFACE
19/32”
11/16”
1/16”
1/32”
1-29/32”
25/32”
•
•
•
•
Full surface continuous hinge
1/32" door panel offset
Tamper resistant removable door leaf cover
1-7/16”
1/16”
1/32”
5/16” Square
Edge Clearance
GHFS30
3-3/16”
25/32”
1-5/32”
DH-1183LF
25/32”
19/32”
7/16”
1/32”
1-7/16”
LIMITED FRAME
•
•
•
•
Full surface continuous hinge
For narrow (limited) frame applications
Tamper resistant removable door leaf cover
1/32”
2
TransAtlantic
Roton
Select
Pemko
Standard Duty
83"
DH-1183CFM
DH-1183
DH-1183FM2
DH-1183LF
780-112
780-210
780-224
780-157
SL11
SL21
SL24
SL57
FMSLF
FS
FM
FSCP
Heavy Duty
83"
DH-1183CFMHD
DH-1183HD
DH-1183FM2HD
DH-1183LFHD
780-112HD
780-210HD
780-224HD
780-157HD
SL11HD
SL21HD
SL24HD
SL57HD
FMSLFHD
FSHD
FMHD
FSCPHD
Standard Duty
95"
DH-1195CFM
DH-1195
DH-1195FM2
DH-1195LF
780-112
780-210
780-224
780-157
SL11
SL21
SL24
SL57
FMSLF
FS
FM
FSCP
Heavy Duty
95"
DH-1195CFMHD
DH-1195HD
DH-1195FM2HD
DH-1195LFHD
780-112HD
780-210HD
780-224HD
780-157HD
SL11HD
SL21HD
SL24HD
SL57HD
FMSLFHD
FSHD
FMHD
FSCPHD
Trans-Atlantic Co.
Tel: 800.523.9956
Fx: 800.531.0844
Specifications
•
•
•
•
•
•
•
•
•
•
Commercial: Standard and heavy weight
Plain and ball bearing
Pin: Steel non-rising removable with button tip
Type: Full mortise
Corner: square corner standard
Door: For medium to heavy weight door
Frequency: From low to high openings
Fasteners: Packed with wood and machine screws
Installation: Template screw hole locations
Sold as box of 3
COMMERCIAL HINGES
ANSI/BHMA Standards
•
•
•
•
•
•
Plain Bearing conforms to ANSI A8133
Ball Bearing conforms to ANSI A8112
Heavy Duty Ball Bearing conforms to ANSI A8111
Stainless Steel Plain conforms to ANSI A5133
Stainless Steel Ball conforms to ANSI A5112
Stainless Steel HD Ball conforms to ANSI A5111
Model
Finish
Base Material
Size
Type
Thickness
DH-BB179SQ3535
US26D
Steel
3.5" x 3.5"
Ball Bearing
Full Mortise
.119"
DH-PB190SQ454
USP, 3, 4, 10B, 26, 26D
Steel
4.5" x 4"
Plain Bearing
Full Mortise
.134"
DH-BB179SQ454
USP, 3, 4, 10B, 26, 26D
Steel
4.5" x 4"
Ball Bearing
Full Mortise
.134"
DH-BB179SQNRP454
USP, 3, 4, 10B, 26, 26D
Steel
4.5" x 4"
Ball Bearing, NRP
Full Mortise
.134"
DH-PB190SQ4545
USP, 3, 4, 10B, 26, 26D
Steel
4.5" x 4.5"
Plain Bearing
Full Mortise
.134"
DH-BB179SQ4545
USP, 3, 4, 10B, 26, 26D
Steel
4.5" x 4.5"
Ball Bearing
Full Mortise
.134"
DH-BB179SQNRP4545
USP, 3, 4, 10B, 26, 26D
Steel
4.5" x 4.5"
Ball Bearing, NRP
Full Mortise
.134"
DH-SSBB179SQ454
US32D
Stainless Steel
4.5" x 4"
Ball Bearing
Full Mortise
.134"
DH-SSBB179SQNRP454
US32D
Stainless Steel
4.5" x 4"
Ball Bearing, NRP
Full Mortise
.134"
DH-SSPB190SQ4545
US32D
Stainless Steel
4.5" x 4.5"
Plain Bearing
Full Mortise
.134"
DH-SSBB179SQ4545
US32D
Stainless Steel
4.5" x 4.5"
Ball Bearing
Full Mortise
.134"
DH-SSBB179SQNRP4545
US32D
Stainless Steel
4.5" x 4.5"
Ball Bearing, NRP
Full Mortise
.134"
DH-BB168SQ4545
US26D
Steel
4.5" x 4.5"
Ball Bearing
Full Mortise, Heavy Weight
.180"
DH-BB168SQNRP4545
US26D
Steel
4.5" x 4.5"
Ball Bearing, NRP
.180"
DH-SSBB168SQ4545
US26D
Stainless Steel
4.5" x 4.5"
Ball Bearing
.180"
DH-SSBB168SQNRP4545
US26D
Stainless Steel
4.5" x 4.5"
Ball Bearing, NRP
.190"
DH-BB168SQNRP545
US26D
Steel
5" x 4.5"
Ball Bearing, NRP
.190"
DH-SSBB168SQNRP545
US26D
Stainless Steel
5" x 4.5"
Ball Bearing, NRP
.190"
Specifications
•
•
•
•
•
•
•
1
Bearing
Commercial: standard weight
Bearing: Ball bearing
Pin: Steel non-rising removable with button tip
Type: Full mortise
5/32" radius corner
Fasteners: Packed with wood and machine screws
3 hinges per box
Model
Finish
Base Material
DH-BB179RC532NRP454
US10B, 26D
Steel
DH-SSBB179RC532NRP454
US10B, 32D
Stainless Steel
Size
STOREFRONT HINGES
Bearing
Type
Thickness
4.5" x 4"
Ball Bearing, NRP
Full Mortise
.134"
4.5" x 4"
Ball Bearing, NRP
Full Mortise
.134"
HINGES
SPRING HINGES
Specifications
•
•
•
•
•
•
•
•
•
•
Commercial: Standard weight
Single and double acting
Corner: square standard
¼" or ⅝" radius corner available on 4" x 4" hinge
For medium to heavy weight door
Frequency: Low to high openings
ANSI A81071F for self closing hinges
Packed with wood and machine screws
Installation: template screw hole locations
Sold as pair
Model
Finish
Base Material
DH-UL17944
USP, 3, 4, 10B, 26D
Steel
DH-UL179454
USP, 3, 4, 10B, 26D
DH-UL1794545
DH-5500SA66
Size
Bearing
Type
Thickness
4" x 4"
Plain bearing
Full mortise
.134"
Steel
4.5" x 4"
Plain bearing
Full mortise
.134"
USP, 3, 4, 10B, 26D
Steel
4.5" x 4.5"
Plain bearing
Full mortise
.134"
USP
Steel
6" x 6"
Plain bearing
Full mortise
NA
DH-5579645
USP
Steel
6" x 4.5"
Plain bearing
Full mortise
NA
DH-5500SA77
USP
Steel
7" x 7"
Plain bearing
Full mortise
NA
DH-TAN5004
BK, GV, USP, 3
Steel
4"
Plain bearing
Full mortise, double action
NA
DH-TAN5005
BK, GV, USP, 3
Steel
5"
Plain bearing
NA
DH-TAN5006
BK, GV, USP, 3
Steel
6"
Plain bearing
NA
HINGE
ACCESSORIES
DH-RP
REINFORCING HINGE
ANSI/BHMA Standards
•
•
•
Handed: LH, RH
Sold as each
Finish: US26D
DH-PIN
HINGE PIN
ANSI/BHMA Standards
•
•
Sold as each
Finish: US4
2
Trans-Atlantic Co.
Tel: 800.523.9956
Fx: 800.531.0844
DL-LHV SERIES
COMMERCIAL LEVER
The DL-LHV series cylindrical leverset are designed for use on all heavy duty Grade 1
commercial applications. The LHV series is also ADA compliant and features a free
wheeling clutch mechanism option that ensures longevity and security. Solid zinc
diecast.
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Door Thickness: 1¾” - 2”
Backset UL Listed: 2¾” - face 1⅛”- 2¼”
Cylinder: Schlage “C” keyway
Keying: Schlage 6 pin keyed
Key: 2 six pin nickel plated
Function: See description page 10
Certification: UL listed ANSI A156.2 Grade 1
Latch: ⅝" projection stainless steel 3 hour UL
Bore: 2⅛” hole retrofits all cylindrical locksets
Strike: ANSI 1¼” - 4⅞” strike
Vandal Resistant: Clutch free wheeling mechanism option
Warranty: Lifetime mechanical. 10 year finish.
Finish: US26D
IC core option
The DL-HVB series cylindrical knobset are designed for
use on all heavy duty grade 1 commercial applications.
They are solid zinc diecast.
DL-HVB SERIES
COMMERCIAL KNOB
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
Backset UL Listed: 2¾” - face 1⅛”- 2¼”
Latch: ⅝" projection stainless steel 3 hour UL
Finish: US32D
IC core option
1
GRADE 2
COMMERCIAL LOCKSETS
DL-LSV SERIES
COMMERCIAL LEVER
The DL-LSV series cylindrical leverset are designed for use on all
standard duty grade 2 light commercial and residential applications.
The LSV series is also ADA compliant. Solid zinc diecast.
Specifications
Saturn Style
Sparta Style
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Backset: 2¾” - face 1⅛”- 2¼”
IC
Latch: ½" projection stainless steel 3 hour UL
EXBS5: Extension for 5" bracket
Thrubolts are removable
Vandal Resistant: Clutch free wheeling mechanism option
Finishes: US3, 10B, 26D
core option
The DL-SVB series cylindrical knobset are designed
for use on all standard grade 2 light commercial and
residential applications. Solid zinc diecast.
DL-SVB SERIES
COMMERCIAL KNOB
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
Backset: 2¾” - face 1⅛”- 2¼”
Latch: ½" projection stainless steel 3 hour UL
Finish: US3, 32D
IC core option
2
GRADE 3
COMMERCIAL LOCKSETS
DL-ECL SERIES
ECONOMY LEVER
The DL-ECL series cylindrical leverset is designed for use on
all economy grade 2 residential applications. The ECL series is
also ADA compliant. Solid zinc diecast.
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
Backset: 2¾" face 1”- 2¼”
Shim Filler for 1" latch to 1 ⅛" prep
Key: 2 5 pin nickel plated
Certification: ANSI 117.1 and ADA
Come with Non-UL 1⅛” - 2¾” ANSI strike
Finish: US26D
DL-ECB SERIES
ECONOMY KNOB
The DL-ECB series cylindrical knobset are designed for
use on all economy grade 3 residential applications.
Solid zinc diecast.
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
3
Door Thickness: 1¾”
Backset: Adjustable 2⅜” - 2¾" face 1”- 2¼”
Shim Filler for 1" latch to 1 ⅛" prep
Certification: ANSI A 117.1
Come with standard T Strike
Finish: US3, 32D
COMBO ENTRY
DL-LSV/SVB LOCKSET
Specifications
•
•
•
•
•
•
•
•
•
•
•
Backset: 2¾" face 1”- 2¼”
Keyed Alike: 1 key operates both lock and
deadbolt
Schlage 6 "C" keyway
DL-SVB53DB251/260: Knob combo lockset
DL-LSV53DB751/760: Lever combo lockset
Certification: UL Listed ANSI A A156.2 Grade 2
Removable brass cylinders
Finish: US26D, 32D
ACCESSORIES
COMMERCIAL LOCKSET ACCESSORIES
LATCHES
FILLER COVER
•
•
•
•
•
•
•
•
•
•
2⅜" and 2¾" backsets
1⅛" SQ face
DL-DLUL: Fire rated Deadlatch
DL-SLUL: Fire rated Springlatch
DL-ADJ: Adjustable backset
Warranty: 1 year
Finish: US3, US32D
Deadlatch
DL-DL238/234
2⅜", 2¾" Backset
2⅜" filler plate
DX-161
Finish: USP
Springlatch
DL-SL238/234
2⅜", 2¾" Backset
STRIKES
•
•
Warranty: 1 year
Finish: US3, 32D
DL-TA001
1¼" x 4⅞"
ASA Strike
DL-TA019
1¼" x 2¾"
T Strike
DL-TA018
1⅛" x 1¼"
Dead bolt strike
DL-TA020
1¼" x 2¼"
Full Lip Strike
4
DEADBOLTS
COMMERCIAL GRADE DEADBOLTS
DL-DB700 SERIES
GRADE 2 DEADBOLT
DL-DB751
SINGLE CYLINDER
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
DL-DB760
Backset: UL adjustable 2⅜” - 2¾"
Full 1" Throw Deadbolts
Strike: TA-019 1⅛” - 2¾” strike
DL-DB751: Single cylinder
DL-DB760: Double cylinder
Matches LHV and LSV series
Warranty: 1 year
Finish: US3, 26D
DOUBLE CYLINDER
DL-DB200 SERIES
GRADE 3 DEADBOLT
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
5
Backset: Adjustable 2⅜” - 2¾"
Full 1" Throw Deadbolts
¼" Heavy Gauge Thru-Bolts
Matches HVB and SVB Series
DL-DB251: Single cylinder
DL-DB260: Double cylinder
Warranty: 1 year
Finish: US3, 32D
DL-DB251
SINGLE CYLINDER
DL-DB260
DOUBLE CYLINDER
MORTISE LOCKS
DL-ML234
DL-ML800
Specifications
Specifications
MORTISE LOCKSET
•
•
•
•
•
•
•
•
•
•
•
•
Commercial Grade steel case
Full 1" throw chrome plated heavy duty deadbolt
Door Thickness: 1¾” standard
Backset: 2¾”
Faceplate: 1¼" x 8" A115.1
Adjustable from flat to ⅛"
Bevel both ways
Certification: ANSI 156.13-1980
Strike: Standard ASA strike
Finish: US26D
MORTISE LOCKSET
•
•
•
•
•
•
•
•
•
•
•
•
Solid brass Mortise lockset
Reversible latchbolt and levers
Solid brass escutcheons
Door Thickness: 1⅜" - 1⅞" Backset: 1¾" narrow stile
Faceplate: 13/16" x 1⅞" solid brass
Keying: Rekeyable
Function: Key operated for entry with thumbturn
for unlocking and locking.
Finish: US3, 15, 26
DL-DX914/920
MORTISE LOCKSET
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
Solid brass Mortise lockset with reversible latchbolt
DL-DX914: Spindle fixed to escutcheons
DL-DX920: Loose threaded spindle
Full 1" throw chrome plated heavy duty deadbolt
Solid brass knobs and escutcheon plates
Door Thickness: 1¾” standard
Backset: 2½”
Exterior plate: 2¾" x 10" solid brass
Face Plate: 11/16" x 7⅝"
Keying: 5 Pin tumbler
Finish: US3
6
MORTISE LOCK
HEAVY DUTY MORTISE LOCK
DL-DXML
The DL-DXML mortise lockset is designed for all heavy duty
commercial and industrial applications. This series meets ADA
handicap requirements and meets a 3 hour fire listing.
HEAVY DUTY MORTISE LOCK
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
Door Thickness: 1¾”
Backset: 2¾"
Face plate: 1¼" x 8"
UL 3 Hour fire Listed Latch
1" Throw Bolt
1⅛" Mortise Cylinder
SC6 Schlage "C" 6 pin keyway
Sectional and escutcheon trim available
Barrier free levers and returns within ½" from door face
Handed (must specify LH or RH) yet field reversible
Dead or spring latch
Levers to be SS or SE
Warranty: 3 years
Trim Specifications
•
•
•
Heavy duty commercial; Grade 1
DL-SS: Leverset; solid brass
DL-SE: Handleset; solid brass
DL-SS
Sectional
Leverset
DL-SE
Escutcheon
Handleset
7
CYLINDERS
COMMERCIAL GRADE MORTISE CYLINDERS
Mortise Cylinder
Thumbturn Cylinder
Rim Cylinder
Dummy Cylinder
Part
Description
Keyways
Keyed
Finishes
Cam
Packed
DL-CYLTA550
S-A-Y
KD, KA,
KA2, KA50
Al, DU,
US3, 26D
A, C
1-2/box
150/case
DL-CYLTA555
5 pin tumbler, diecast
S-A-Y
KD, KA,
KA2, KA50
Al, DU,
US3, 26D
A
2/box
150/case
DL-CYLTA560
1⅛" Mortise Key Cylinder
S-A-Y
KD, KA,
KA2, KA50
Al, DU,
US3, 26D
C
1/box
150/case
DL-CYLTA580
1¼" Mortise Key Cylinder
S-A-Y
KD, KA,
KA2, KA50
Al, DU,
US3, 26D
C
1/box
150/case
DL-CYLT570
Solid brass
Al, DU,
US3, 26D
A
1/box
150/case
DL-CYLTA577
Diecast
Al, DU,
US3, 26D
A
1/box
150/case
DL-CYLTA595
1" Mortise Dummy Cylinder
Solid Brass
Al, DU,
US3, 26D
1/box
150/case
ED-RC051
1” Rim Cylinder
Solid Brass
US26D,
DU
10/box
50/case
S
KD, KA
KEYWAY CODE
•
•
•
S: Schlage C
A: Arrow
Y: Yale 8
KEYING
•
•
•
•
•
2 keys per cylinder
KD: Keyed different
KA: Keyed alike
COMMERCIAL GRADE LOCK CYLINDERS
Trans-Atlantic 6-pin cylinders are manufactured with
strict quality control to insure precise tolerances and
smooth operations. Keying service available in keyed
alike, master or construction.
UNIVERSAL CYLINDERS
•
•
•
DL-LC50: G2 Cylinder
DL-LC53: G3 Cylinder
DL-DC50: Deadbolt Cylinder
UNIVERSAL CYLINDERS
•
•
•
DL-6GAKD: knob/lever Cyl. 5 Pin Sargent GA Keyed Diff.
DL-6SC1KD: knob/lever Cyl. 5 Pin Schlage C(SC1) Keyed Diff
DL-6Y1KD: knob/lever Cyl. 5 Pin Yale 8(Y1) Keyed Diff.
UNIVERSAL CYLINDERS
•
•
•
DL-3GAKD: knob/lever Cyl. 5 Pin Sargent GA Keyed Diff
DL-3SC1KD: knob/lever Cyl. 5 Pin Schlage C(SC1) Keyed Diff.
DL-3Y1KD: knob/lever Cyl. 5 Pin Yale
8
LOCKSET FUNCTIONS
10 PASSAGE F75
20 EXIT
LHV, LSV, ECL
HVB, SV-B, ECB
LSV
40 PRIVACY F76
53 ENTRY F109
Both levers are always free
Push button locking from interior.
Lock can be opened from exterior by
rotating interior lever. Safety unlock for
emergencies.
LHV, LSV, ECL
HVB, SVB, ECB
60 DOUBLE CYLINDER
Key in locks unlocks both knobs.
LSV
Push button locking from interior and keyed
exterior.
LHV, LSV, ECL
HVB, SVB, ECB
70 CLASSROOM F84
Exterior lever locked or unlocked by key.
Interior lever always allows egress.
LHV, LSV
HVB, SVB, ECB
80 STOREROOM F86
DT DUMMY
LHV, LSV
HVB, SVB, ECB
LSV, ECL
SVB, ECB
Outside lever is always locked. Key
unlatches only.
9
Blank plate on outside. Interior lever always free.
Dummy trim for one side of door
COMPARISON CHART
FUNCTION
DORMA
HAGER
CAL-ROYAL
PDQ
SCHLAGE
PASSAGE
DL-LHV10
CL810
3410
(C) GN-30
GT126
ND10S
PRIVACY
DL-LHV40
CL840
3440
(C) GN-20
GT176
ND40S
ENTRANCE
DL-LHV53
CL853
3453
(C) GN-00
GT116
ND53PD
CLASSROOM
DL-LHV70
CL870
3470
(C) GN-03
GT148
ND70PD
STOREROOM
DL-LHV80
CL880
3480
(C) GN-04
GT115
ND80PD
DORMA
HAGER
CAL-ROYAL
PDQ
SCHLAGE
FUNCTION
PASSAGE
DL-LSV10
CL710
3510
CSL-30
SP126
AL10S
PRIVACY
DL-LSV40
CL740
3540
CSL-20
SP176
AL40S
ENTRANCE
DL-LSV53
CL753
3553
CSL-00
SP116
AL53PD
CLASSROOM
DL-LSV70
CL770
3570
CSL-03
SP148
AL70PD
STOREROOM
DL-LSV80
CL780
3580
CSL-04
SP115
AL80PD
DUMMY
DL-LSVDT
CL701
3517
CSL-40
SP211
AL170
ORDER SPECIFICATIONS
PRODUCT DESCRIPTION AND CODING
SERIES
FUNCTION
DL-LHV
53
DX-LSV
DX-LHV
DX-ECL
HV-B
SV-B
ECB
•
•
•
•
FEATURE
FINISH
CL
Passage
Privacy
Entrance
Classroom
Storefront
Dummy
26D
Clutch
IC Core
US3: Polished Brass
US10B: Oil Rubbed Bronze
26D: Brushed Chrome
US32D: Brushed Stainless Steel
All locksets come standard with 2¾ latch, ANSI strike, and SC1 cylinder.
IC: Core not included. See Cylinders.
Must specify handing, keying preferences, and keyway.
Must specify if 2⅜" backset desired
10
Trans-Atlantic Co.
Tel: 800.523.9956
Fx: 800.531.0844
SECURITY SURFACE BOLTS
GH-UL831/UL453
GH-UL831
•
•
•
•
•
•
GH-UL453
FLUSH BOLTS
GH-ULSB197
FOOT BOLT
Specifications
•
•
•
•
•
GH-ULSB197: UL fire rated
GH-197: Extruded Aluminum
Non handed
⅝" throw with ⅞" vertical adjustment
12" rod to fit ANSI prep.
Spring loaded lever
½" dia. brass bolts
Finishes: US3, 26, 26D
SECURITY BOLT
GH-835SE
Specifications
1
Steel security bolt
Heavy duty
Durable silver sprayed epoxy finish
9" with 1½" projection
Surface or motise application
Polybagged with fasteners
Finishes: AL
Foot bolt 6"
Operated by pressure of foot on cap
Released by pressure on tip
Packaged with screws and strike
Finishes: Zinc plated
BARREL BOLT
GH-832BB
•
•
•
•
•
•
•
Surface mounting
Tamper proof
UL Listed
8" Long
11/16" throw, 1⅝" projection
Finishes: US26D, ZP
GH-1057
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Concealed mounting
Tamper proof
UL listed
8" Long
1" throw, 1⅝" projection
Finishes: US26D
Speficiations
•
•
•
•
•
•
5" and 8"
Locking and padlockable bolt
Extra heavy duty
Rust resistant
Heavy zinc plated bolt, 9/16" dia.
Finishes: GV
CHAIN BOLT
GH-1055
Specifications
•
•
•
Chain bolt 6"
Packaged with screws and strike
Finishes: Zinc plated
CHAIN GUARD
GH-1631/DX3700
GH-1631
•
•
•
•
•
•
•
Adjustable 20"- 30½"
Heavy duty commercial
Cast brass mounting plates
2 rugged compression springs
Vinyl cover
Cast brass mounting and plates
Finishes: DU, US26D
GH-1631
GH-DX3700
•
•
•
Single spring
Pack with fasteners
Finishes: Zinc Plated
GH-3700
HASPS
GH-CD575/CD577/600XHH75
GH-CD575
•
•
•
•
Single flexible
Safety hasp
6¼"
Zinc plated
GH-CD577
•
•
•
•
Double Flexible
Safety hasp
7¾"
Zinc plated
GH-600XHH75
•
•
•
•
Garage and utility door
Extra heavy hinge hasp
7½"
Zinc plated
2
DOOR REINFORCER
GH-DR45/DR90
MODEL NUMBER
SIZE
BACKSET
DOOR THICKNESS
FINISHES
GH-DRDB101
4½"
2 ⅜"
1 ¾"
US3, 32D
GH-DRDB102
4½"
2 ¾"
1 ¾"
US3, 32D
GH-DRDB103
4½"
2 ⅜"
1 ⅜"
US3, 32D
GH-DRLK104
9"
2 ⅜"
1 ¾"
US3, 32D
GH-DRLK105
9"
2 ¾"
1 ¾"
US3, 32D
GH-DRLK106
9"
2 ⅜"
1 ⅜"
US3, 32D
4" Door Reinforcer
9" Door Reinforcer
LATCH GUARDS
GH-LG109/LG111
GH-LG109
•
•
•
•
•
COMMERCIAL DOOR VIEWERS
Specifications
•
•
•
•
•
Specifications
GH-UL3315
1 1/16" bore
200' viewing
3
Fits narrow line aluminum doors
Reverisble handing
Tamper-proof
Mounts to door with heavy duty sex bolts
Finishes: AL, DU
GH-DCV01
Door viewers are made with safety and durability
in mind. Solid cast brass with highly polished
optic lenses for extra wide viewing angles.
1¾" thick wood or metal doors
Solid cast brass
UL: Fire rated
Finishes: US3, 26D
•
•
•
•
•
DOOR CHIME
DOOR VIEWERS
•
•
•
•
GH-LG111
Fits all hollow metal or wood doors
Reversible handing
Protects cylindrical and mortise locks and
guards latch bolt
Mounts to door with heavy duty sex bolts
Finishes: US26D
GH-SB190
9
/16" bore
190' viewing
GH-UL3300
½" bore
190' viewing
Doors 1⅛" - 2" thick
Available in deluxe: GH-DXDCV01
Two-tone chime
180' viewing angle
Finishes: US3, 26D
DOOR STOPS
CAST BRASS AND SOLID BRASS
FLOOR MOUNTED DOOR STOPS
•
•
•
•
•
•
Wrought steel and cast brass
Suitable for all floor conditions
Bumpers constructed from durable rubber
Ideal for commercial applications
Fasteners: screw packs included
Finishes: US3, 26D
WALL MOUNTED DOOR STOPS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Wrought steel and cast brass
Suitable for all wall conditions
Bumpers constructed from durable rubber
Fasteners: screw packs included
GH-DS406: Available in US26D only
Finishes: US3, 26D
GH-DS436
Low Dome
Door Stop
GH-DS438
High Dome
Door Stop
GH-DS401
Concave
Wall Stop
GH-DS406
Convex
Wall Stop
DOOR HOLDERS
Drop Down & Step On
GH-135: 4" Cast alloy door holder
GH-1135: 5" Cast alloy door holder
GH-235: 4" Solid brass door holder
GH-1235: 5" Solid brass door holder
GH-380: 5" Door holder
GH-6015: 8" Step on door holder
Durable rubber tips
Polybagged with sheet metal screws
Finishes: US3, 26D
6015 Finishes: AL/DU
MAIL SLOTS
HEAVY BRASS
Exterior Spring Mounting
•
•
•
•
•
Interlocking flap and frame
Packaged with screws
GH-HD390: Letter slot 3" x 10"
GH-HD490: Magazine slot 3½" x 13"
Interior Gravity Mounting
•
•
•
•
•
Gravity flap with ¼" air vent
Packaged with screws
Interior Trim Plate
•
•
•
4
PULL PLATES
PUSH PLATES
•
•
CLASSIC PULL WITH HANDLE
•
•
•
•
•
•
Aluminum, solid brass, stainless
steel materials
Classic and round pulls
16 guage (.050") thick
Mounting screws for 1¾" thick door
Packed with sheet metal screws
Conforms to ANSI J405 and A117.1
Finishes: AL, US3, 32D
GH-PP53/54
Aluminum, solid brass, stainless steel
materials
Mounting screws for 1¾" thick door
Conforms to ANSI J301 and A117.1
Finishes: AL, US3, 32D
•
•
•
•
GH-PP53
3½" X 15"
GH-PP54
4" X 16"
GH-PP5310 3½" X 15" with classic pull
GH-PP5425 4" X 16" with round pull
GH-PP5325 3½" X 15" with round pull
KICK PLATES
COMMERICIAL
•
•
•
•
•
•
•
•
•
Aluminum, solid brass, stainless steel materials
Stainless steel available
16 guage (.050") thick
Kick plates not bevelled
Other sizes and finishes available upon request
Conforms to ANSI J102 and ANSI A117.1 for
ADA barrier-free accessibility
Brasstone on aluminum available
Finishes: AL, BT-AL, US3, 32D
GH-KP834
GH-KP1034 10" x 34"
TEE HANDLE
DOOR PULL
•
•
•
•
•
•
•
•
•
•
•
•
GH-960
5
8" x 34" Polished chrome die cast handle
Heavy duty
4" spindle, 5/16" square
Reversible
90 degree turn
Keying avilalbe: KA, KD
Packaged with 2 keys
Finishes: US26
GH-P531
Heavy cast aluminum door pull
7 ½" x 1 ⅛"
2 ¼" projection
Finishes: AL, DU
HARDWARE
BALL CATCHES/ROLLER LATHCES
GH-2945
•
•
•
•
•
•
Drive in ball catch
Maximum roller projection: 5/16"
Latch: 1⅜"
Diameter: 1"
Strike dimensions: 1⅜" x 2¼"
Finishes: US3
GH-2950
•
•
•
•
•
•
Mortise ball catch
Latch: 1⅜"
Diameter: ⅞"
Strike dimensions: 1⅜" x 2¼"
Finishes: US3
GH-2955
•
•
•
•
•
Roller latch
Latch face: 1" x 1⅜"
Strike dimensions: 2" x 1⅜"
Finishes: US3, 26
MAGNETIC CATCH
GH-CH2935
•
•
•
•
•
•
•
Cabinet magnetic catch
Solid aluminum housing
Designed for heavy doors
Holding power up to 35 lbs
Can be used for double door installation
Polybagged with screws
Finishes: AL
CABINET PULLS
GH-CH44840
•
•
•
•
•
•
4" cabinet pulls
Aluminum
5/16" diameter
For cabinet doors ¾" - 1⅜" thick
Packed with machine screws
Finishes: AL, US26D
6
ADA SIGNAGE
ADA COMPLIANT SIGNAGE
•
•
•
•
•
•
Raised symbols & letters
8" x 8" Pictogram
Grade 2 Braille
3/16" thick polystyrene- ABS with UV
stabilizer to avoid fading
⅝" raised lettering
Finishes: Blue, Black
EXIT
GH-S441
Men
GH-S440
Women
GH-S445
Men Handicap
GH-S443
Women Handicap
Trans-Atlantic Co.
Tel: 800.523.9956
Fx: 800.531.0844
GH-S442
Family Restroom
GH-S444
Family Handicap
GH-EXIT
Exit
TM
Premium Grab Bars
DESIGNER
universal elegance series
EZGrab™’s Universal Elegance designer grab bar series offers a variety of styles to add both
safety and fashion to any bathroom. Constructed of high-quality, 18-gauge stainless steel, each
design is available in both polished chrome and satin stainless steel and in a variety of lengths.
Other features include easy-to-install flange mounts to conceal screws and 1-1/4” tubing.
DESIGNER
majestic curve
Size
Satin SS
Polished SS
18”
GBD-18-1.25-SSDSC GBD-18-1.25-PSDSC
20”
24”
stylish streamline
Size
Satin SS
Polished SS
18”
GBD-18-1.25-SSDSA GBD-18-1.25-PSDSA
20”
24”
2
DESIGNER
sophisticated accents
Size
Chrome Accent
Bronze Accent
16”
GBD-16-1.5-WHCH
GBD-16-1.5-WHBZ
24”
GBD-24-1.5-WHCH
GBD-24-1.5-WHBZ
simplistic fashion straight
Size
3
Satin SS
Polished SS
18”
GBD-18-1.25-SSDSB
GBD18-1.25-PSDSB
20”
GBD-20-1.25-SSDSB
GBD20-1.25-PSDSB
24”
GBD-24-1.25-SSDSB
GBD24-1.25-PSDSB
DESIGNER
elegant curve
Size
Satin SS
Polished SS
18”
GBD-18-1.25-SSDC
GBD-18-1.25-PSDC
20”
GBD-20-1.25-SSDC
GBD-20-1.25-PSDC
24”
GBD-24-1.25-SSDC
GBD-24-1.25-PSDC
Dark Wood with
SS finish
SSSW-12-SSDW
designer shower seat
•Folds for easy
storage
•Holds up to 220
pounds
4
PREMIUM
premium grab bars
EZGrab™’s Premium series provides the ultimate standard in safety and quality for any bathroom.
Perfect for both residential and commerical use, EZGrab™ grab bars are constructed in 18-gauge
stainless steel and exceed building codes and ADA criteria. The premium series is available in a
variety of lengths and finishes with both concealed- or exposed-screw mounting.
exposed screw
1-1/2” tubing
Size
Part Number
12”
GB-12-1.5-SSES
16”
GB-16-1.5-SSES
18”
GB-18-1.5-SSES
24”
GB-24-1.5-SSES
32”
GB-32-1.5-SSES
36”
GB-36-1.5-SSES
concealed mount
Size
5
1-1/4” tubing
1-1/5” tubing
12”
GB-12-1.25-SSCS
GB12-1.5-SSCS
16”
GB-16-1.25-SSCS
GB16-1.5-SSCS
18”
GB-18-1.25-SSCS
GB18-1.5-SSCS
24”
GB-24-1.25-SSCS
GB24-1.5-SSCS
32”
GB-32-1.25-SSCS
GB32-1.5-SSCS
36”
GB-36-1.25-SSCS
GB36-1.5-SSCS
42”
GB-42-1.25-SSCS
GB42-1.5-SSCS
48”
GB-48-1.25-SSCS
GB48-1.5-SSCS
PREMIUM
premium grab bars
white finish
1-1/2” tubing
Size
Part Number
12”
GB-12-1.5-WHSS
18”
GB-18-1.5-WHSS
24”
GB-24-1.5-WHSS
36”
GB-36-1.5-WHSS
knurled finish
1-1/2” tubing
Size
Part Number
18”
GB-18-1.5-KSS
24”
GB-24-1.5-KSS
36”
GB-36-1.5-KSS
42”
GB-42-1.5-KSS
6
TM
Trans-Atlantic Co.
800-523-9956

Trans-Atlantico Product Catalog - Architectural Builders Supply Inc.

Transcription

Similar documents

Zak McKracken – Mayan Maze Map

sliding glass door refrigerators

Color Flyer - World Manufacturing

LifeScapes Highboy Storage Shed

LiftMaster 81LM

Rilo Kiley After Hours

installation instructions

The GinSan® Door - GinSan Industries

Gosford Hospital - Qualitas Consortium

ALUMINUM TOOL-PRO - Reading Truck Body