JEN WOODHOUSE / THE HOUSE OF WOOD – Monogram Jewelry

Transcription

JEN WOODHOUSE / THE HOUSE OF WOOD – Monogram Jewelry
JEN WOODHOUSE / THE HOUSE OF WOOD – Monogram Jewelry Organizer
MATERIALS:
½” Plywood
Paint Stirrer Sticks or Lattice
3/8” Wooden Dowel
2 – 1” Round Wooden Ball Knobs
2 – Packages of Wooden Pegs
Wood Glue
CUT LIST:
1 – ½” plywood @ 12” x 16” (monogram)
2 – 1x2 @ 12” (sides)
2 – 1x2 @ 13” (peg boards)
2 – ½” plywood “J” shape (hooks)
1 – lattice @ 16” (top earring holder)
1 – lattice @ 14 ½” (bottom earring holder)
1 – 3/8” dowel at 15 ½” (bracelet rack)
1
JEN WOODHOUSE / THE HOUSE OF WOOD – Monogram Jewelry Organizer
TOOLS:
Tape Measure
Drill with 13/64” and 3/32” Drill Bits
Jigsaw and/or Scroll Saw
Safety Glasses
Speed Square
Circular Saw
Mallet
Hearing Protection
STEP 1
Sketch out the monogram and cut it out of ½” plywood with a jigsaw or scroll saw.
2
JEN WOODHOUSE / THE HOUSE OF WOOD – Monogram Jewelry Organizer
STEP 2
Glue and clamp the side pieces as shown.
3
JEN WOODHOUSE / THE HOUSE OF WOOD – Monogram Jewelry Organizer
STEP 3
Using a 13/64” drill bit, drill the holes for the wooden pegs then hammer them into place. Glue
and clamp the peg boards as shown. There is a 1 ½” space between the top and bottom peg
boards.
4
JEN WOODHOUSE / THE HOUSE OF WOOD – Monogram Jewelry Organizer
STEP 4
Cut out the “J” pieces that will carry the dowel and glue them to the organizer as shown.
5
JEN WOODHOUSE / THE HOUSE OF WOOD – Monogram Jewelry Organizer
STEP 5
Using a 3/32” drill bit, drill the holes for the earring holders and attach to the organizer as
shown. I recommend creating a template out of a piece of scrap so that the holes are evenly
spaced and perfectly aligned.
6
JEN WOODHOUSE / THE HOUSE OF WOOD – Monogram Jewelry Organizer
STEP 6
You may have to drill a larger hole into the wooden balls so that the 3/8” dowel will fit into it.
Glue the balls on the ends of the dowel and let dry.
7