ALTRALITE LIGHTWEIGHT STEEL END

ALTRALITE
LIGHTWEIGHT STEEL
END-DUMP TRAILER
®
Lightweight Steel.
Heavyweight Performance.
Finally – a lightweight steel end-dump that can stand up to the
demands of even the toughest construction projects. We’ve
combined high quality, high tensile steel with the heavy duty
design and construction quality that Kalyn Siebert is known for.
Now you can economically haul a wide range of payloads, with
confidence that the Kalyn Siebert Advantage is behind you.
High Performance Product
High Performance Design
All Kalyn Siebert trailers are engineered to exceed
the toughest standards in the industry, delivering:
• High tensile steel design for lightweight operation /
heavyweight performance
• Maximum strength at low tare weights
• Economic solution for hauling a wide range of products
• Lowest maintenance costs
• Ease of repair and maintenance
• Longest service life
• Higher dumping angle allows both axles to stay on the
ground during the entire dump
• The highest possible return on investment
You can rest assured that our trailers protect your
payload and your investment.
• Higher tailgate hinge design with forward slant for
positive closing
• Bathtub-style design keeps load center of gravity closer
to trailer longitudinal centerline
That’s the Kalyn Siebert Advantage.
ENGINEERED TO PERFORM. BUILT TO LAST.
1505 West Main Street, Gatesville, TX 76528 | 800.525.9589 | www.kalynsiebert.com
ALTRALITE™ LIGHTWEIGHT STEEL END-DUMP TRAILER
RAISED
TOP
SIDE
BACK
Standard Specs
CONTAINER
No axle stops
AXLES
26.3 yd capacity without side boards
5-stage telescopic hydraulic cylinder
with 265” total stroke 34.5 gal oil capacity
required to totally fill cylinder
22,500 lb. nominal capacity
30.9 yds with side boards
Bathtub body style; 92” nominal wide x 38’ 1”
nominal length
Maximum operating pressure of 2,000 psi
11 gauge high strength steel bulkhead,
sloped to decrease wind resistance and
promote fuel economy
Overall dimensions 8’ 6” wide x 38’ 6” length
11 gauge high strength dog box, steel floor,
and tailgate
Rocking, break-away king pin assembly with
2” SAE king pin and 15” king pin setting
12 gauge high strength steel sides
Draft arms: 4” x 3” x 3/16” tubing widespread
at body for maximum stability
One-piece top rail, 4” x 4” x 1/8” tubing
running full length each side
STABILITY
2” x 6” pine side boards
OEM, 5” round with 1/2” wall
Tapered spindles
16½” x 7” air; parking brakes on
both axle
Hub piloted, 10 stud
Cast drums
Oil seals
4S2M ABS system
Automatic slack adjusters
Park-stand style landing legs
WHEELS / TIRES
Air latch with dual cylinders
Non-load-bearing mounted on draft arms
Steel disc wheels, 8.25” x 24.5”
Manual air release valve
Twin, one piece longitudinal center frame;
8” x 4” x 3/16” tubing running full length of body
OEM, 11R24.5, 14PR radial tires
15° forward slant for positive closing
10 and 11 gauge high strength steel
center bolsters
45° 12 gauge high strength steel shedder
plate inside corner forms
END DUMP OPERATION
48” fifth wheel height
46° dump angle
Led-sealed beam
44,000 lb. single point tandem suspension
Mid-turn signal
3 leaf springs set at 44” spring centers
12 Volt
50” axle to axle center
7-way plug
Steel fenders mounted to body over
suspension area
2 tail light package
Options*
Automatic tailgate release
Electric tarp system
Electric tailgate release
Aluminum wheels
Manual tarp system
Protective coating color
* Additional options available
ELECTRICAL SYSTEM
SUSPENSION