Resins for Industrial Coatings

Arkema Coating Resins
EUROPE / Middle E ast / Africa
Resins for
Industrial Coatings
You can expect more choices
from Arkema Coating Resins.
And we deliver.
Our wide range of choices
helps you optimize performance
and value in your applications.
You can rely on Arkema Coating Resins for a comprehensive selection of resins.
The depth of our product line will help you find the best balance of performance
and value for virtually any application.
• Global Support
Arkema Coating Resins operates
globally to ensure you have access
to product and technical support
wherever you operate.
• Sustainability and Quality
Arkema Coating Resins is committed
to meet the quality and sustainability
needs of its customers, and to
operate in a manner that helps
protect the safety and health of
customers, employees and members
of the communities where we
manufacture and market our
products. For full information on
quality, human health, safety and
sustainability visit our web site:
www.arkemacoatingresins.com.
Delivering more choices
in resins for industrial
coatings.
Our goal is to help you identify a
product from one of our technology
platforms that enables you to formulate a competitive advantage into
your product line. This product guide
presents our full line of both solventborne and waterborne polymers and
introduces new products developed
in response to market needs.
Choose one of our
resins to formulate
coatings for your most
demanding applications.
• General Industrial coatings for metal
• Vehicle Refinishing coatings
• Transportation, Agricultural and
Construction Equipment coatings
• Marine and Protective coatings
• Industrial Wood finishes
The Arkema Coating Resins
product offering for industrial
coatings includes:
Table of Contents
Resins for Metal Coatings......... 2
2 Pack Hydroxyl Functional Acrylics..........4
NISO..................................................6
Thermoplastic Acrylics........................ 6
Thermoset Acrylics............................ 6
Short and Medium Oil Oxidising
Alkyds......................................... 8
Modified Resins............................. 10
Silicone Modified Resins................... 12
2 pack Hydroxyl Functional and
Saturated Polyester Resins.................. 12
Water-Borne Alkyds......................... 14
Water-Borne Acrylic Emulsion. . ............ 14
Liquid Reactive Polyamides. . ............... 16
Resins for Industrial Wood
Coatings. . ................................ 18
Water-Borne APEO Free Emulsions..........20
Polyurethane (Alkyd Resins)................. 22
Polyurethane (Acrylic Resins)............... 24
Nitrocellulose (Alkyd Resins). . .............. 24
Acid Curing (Alkyd Resins)................. 26
UV Radiation Curing
(Unsaturated Polyester Resins).............. 26
• Synaqua ® Alkyd Emulsions and
water dilutable resins
• SynOCRYL ® Thermoset and
Thermoplastic Acrylics
•Synocure ® Acrylic Polyols for two component polyurethane
coatings and acrylic resins for isocyanate-free two component coatings
• Synolac ® Solvent-based Alkyd and Modified Alkyd resins; two-
pack hydroxyl-functional polyester resins; silicone-modified resins
• Unithane ® Urethane Alkyds and Oils
• Crayamid ® Reactive Polyamide hardeners for epoxy resins
• Encor ® 100% Acrylic; Styrene Acrylic; and Vinylic Copolymers Emulsions
• SNAP ® Structured Nano-Acrylic Polymers
1
Resins for Metal Coatings
Based on our strong collaboration partnership with customers and our
understanding of applications,we are able to provide innovative solutions for
Metal coatings markets.
The Metal coating market covers a
very wide range of product types,
suitable for application from light
use to extremes of performance.
This is specific for the coating
type. For primers – adhesion and
corrosion protection. For topcoats –
durability, gloss and colour retention,
from simple alkyds to highly durable
and resistant 2-component acrylics.
There is also the modern requirement
for these properties at reduced VOC
as specified by the different regulations worldwide.
2
Our broad technology toolbox
consists of water-borne and
solvent-borne resins, based on
acrylics, polyurethanes, polyesters
and alkyds.
3
NISO/Thermoplastic/
Thermoset Acrylics
Main Application Fields
Reference
% OH on
solids*
% NVC
Volatile
IA max
mgKOH/g*
Typical
Viscosity
mPa.s@25°C
Typical VOC g/l @
Viscosity 300 mPa.s in
clears
2K
SYNOCURE®
854 BA 80
2.1
80
Butyl Acetate
10
7500
335
•
SYNOCURE®
9293 BA 70
2.9
70
Butyl Acetate
10
1500
335
•
SYNOCURE®
9237 S 70
3.1
70
Sol100/
Xylene 2:1
10
2500
340
•
•
SYNOCURE®
865 EEP 70
3.1
70
EEP**
8
5000
395
•
•
P
SYNOCURE®
852 BA 80
4.1
80
Butyl Acetate
10
7500
295
•
•
P
P
P
Designed for very fast cure response when force-dried. Good thru-dry &
hardness in thick films.
SYNOCURE®
853 BA 80
4.1
80
Butyl Acetate
10
15000
315
•
•
P
P
P
Fast cure response when force-dried. Good handling properties at
elevated temperatures.
SYNOCURE®
866 EEP 75
4.2
75
EEP**
10
3300
325
•
•
P
P
P
P
P
Excellent force-dry, chemical resistance, exterior durability & flow.
SYNOCURE®
9201 S 75
4.2
75
BA/EEP
1:3
10
3700
330
•
•
P
P
P
P
P
Excellent application properties, chemical resistance. Low VOC.
SYNOCURE®
9299 BA 70
4.5
70
Butyl Acetate
10
6250
365
•
•
P
SYNOCURE®
589 S 75
4.9
75
Sol100/BA
1:2
7
6000
355
•
•
P
Clearcoat
Topcoat
ACE
Car
Refinish
Commercial
Vehicles
General
Metal
•
•
•
Protective
Marine
P
•
P
P
P
P
VOC compliant resin for general purpose & protective coatings.
P
Exceptional exterior durability. High quality protective coatings. Air dry
& low bake.
Excellent chemical resistance. High gloss.
P
P
P
Low NCO requirement. Cost effective VOC compliant protective
coatings with good durability.
Low NCO requirement. Fast air drying and early hardness.
P
P
Specific Properties
P
Very high chemical resistance. Good flow & gloss.
NISO/Thermoplastic/ Short & Medium Oil
Thermoset Acrylics
Oxidising Alkyds
Short & Medium Oil
Oxidising Alkyds
Typical Characteristics
2 Pack Hydroxyl
Functional Acrylics
2 Pack Hydroxyl
Functional Acrylics
High Solids—2 pack hydroxyl functional acrylics
Silicone/Polyester
Resins
Typical Characteristics
Main Application Fields
% OH on
solids*
% NVC
Volatile
IA max
mgKOH/g*
Typical
Viscosity
mPa.s@25°C
2K
SYNOCURE®
857 X 60
1.2
60
Xylene
8
1800
•
SYNOCURE®
862 X 60
1.6
60
Xylene
8
6800
•
SYNOCURE®
9216 X 60
2.7
60
Xylene
10
1700
•
SYNOCURE®
878 N 60
2.7
60
Sol100
10
2400
SYNOCURE®
867 S 57**
2.8
57
Xylene/PMA
3:1
6
SYNOCURE®
861 X 55
4.1
55
Xylene
SYNOCURE®
9212 S 60
4.2
60
SYNOCURE®
851 S 60
4.5
SYNOCURE®
9279 S 65
4.2
Primer
Clearcoat
•
Topcoat
ACE
Car
Refinish
Commercial
Vehicles
General
Metal
•
P
•
P
Protective
Marine
Specific Properties
Very high flexibility. Excellent adhesion to galvanised & non-ferrous metals. Excellent
modifying resin.
P
Fast dry industrial coatings and cost effective.
•
P
Good balance of price & performance.
•
•
P
Good balance of price & performance.
4000
•
•
P
P
High quality general purpose resin. Fast dry, excellent exterior durability.
12
2000
•
P
P
Very good primer/surfacer. Excellent scratch fill.
Sol100/BA
3:2
12
3000
•
60
Xylene/BA
2:1
10
2500
65
Xylene/BA
1:3
10
2250
•
•
P
P
P
•
•
P
P
P
•
•
•
P
P
P
•
•
•
P
Excellent gloss, gloss retention & durability.
Very high gloss. Top of the range.
P
P
P
Fast dry and good early hardness. Good weathering performance.
*calculated on the total solid content of the resin **also available in Butyl Acetate
4
5
Liquid Reactive
Polyamides
Reference
Water-Borne Alkyds
& Acrylic Resins
Water-Borne Alkyds
& Acrylic Resins
Conventional—2 pack hydroxyl functional acrylics
Silicone/Polyester
Resins
Liquid Reactive
Polyamides
Modified Resins
Modified Resins
*calculated on the total solid content of the resin **Ethyl-3-Ethoxy Propionate
NISO/Thermoplastic/
Thermoset Acrylics
Short & Medium Oil
Oxidising Alkyds
Modified Resins
General
Metal
Protective
Marine
P
P
Used in combination with cyclo-aliphatic epoxies for high build air drying exterior
finishes.
P
P
VOC compliancy. Can be used for direct to metal. Economical ACE topcoats.
P
Used with SYNOCURE® 899 or 899 LM for fast air dry transport & ACE finishes.
P
P
VOC compliancy with SYNOCURE® 899 BA 70 LM for PC / Marine & high
performance general industrial applications.
P
P
Used with SYNOCURE® 899 or 899 LM for flexible air dry finishes.
% NVC
Volatile
IA max
mgKOH/g*
Typical Viscosity
mPa.s@25°C
2K
Topcoat
SYNOCURE®
885 S 70
Carboxyl
Acrylic
70
Xylene/MP 4:1
14-18
7500
•
•
SYNOCURE®
886 S 70
Carboxyl
Acrylic
70
Xylene/BuOH
2:1
44-52
4500
•
•
P
SYNOCURE®
890 S 55
Carboxyl
Acrylic
55
Xylene/BA/
Sol100/BuOH
14-17
2500
•
•
P
SYNOCURE®
892 BA 70
Multifunctional
Acrylic
70
Butyl Acetate
<10
3500
•
•
SYNOCURE®
895 S 55
Carboxyl
Acrylic
55
Xylene/BA/
Sol100/BuOH
17-23
3800
•
•
SYNOCURE®
899 BA 60
Epoxy Acrylic
Hardener
60
Butyl Acetate
—
550
•
•
Epoxy Equiv Wt ~380. Curing agent for SYNOCURE® 890, 892 & 895.
SYNOCURE®
899 BA 70 LM
Epoxy Acrylic
Hardener
70
Butyl Acetate
—
650
•
•
Epoxy Equiv Wt ~415. Curing agent for SYNOCURE® 890, 892 & 895 for improved
solid.
SYNOCURE®
9436 BA 55
Multifunctional
Acrylic
55
Butyl Acetate
<10
1500
•
•
ACE
Car
Refinish
P
P
P
P
P
General
Metal
Protective
Marine
Specific Properties
Used with SYNOCURE® 899 ba 70 LM. It combines excellent drying, hardness and
low VOC.
*calculated on the total solid content of the resin Thermoplastic acrylics
Typical Characteristics
Main Application Fields
% NVC
Volatile
IA max
mgKOH/g*
Typical
Viscosity
mPa.s@25°C
1K
SYNOCRYL®
874 N 40
40
Sol100
10
1400
•
•
P
P
SYNOCRYL
874 X 40
40
Xylene
10
600
•
•
P
P
50
Xylene/MIBK
3:1
17
1000
•
Reference
®
SYNOCRYL®
7616 S 50
Primer
Clearcoat
Topcoat
ACE
Car
Refinish
Commercial
Vehicles
•
P
Specific Properties
Colour retentive & durable lacquers. Used for container coatings. A modifier for
chlorinated rubber paints.
Primer for difficult substrates. Galvanised steel, non-ferrous metals etc. Excellent
adhesion. Good exterior durability. Used for garage doors.
*calculated on the total solid content of the resin Thermoset acrylics
Main Application Fields
Polymer Type
% NVC
Volatile
IA max mgKOH/g*
Typical Viscosity
mPa.s@25°C
1K Stoving
Topcoat
Can
General
Metal
SYNOCRYL®
839 SD 60
Acrylamide
60
Sol150ND/
n-BuOH 3:1
10
6000
•
•
P
P
SYNOCRYL®
7013 SD 50
Acrylamide
50
Sol150ND/
n-BuOH 1,7:1
11
1800
•
•
P
Reference
Specific Properties
Metal decorating applications. Caps & closures. FDA approved. Clear & pigmented basecoats.
Clear & pigmented basecoats for metal decorating. Good blocking resistance.
Liquid Reactive
Polyamides
*calculated on the total solid content of the resin Water-Borne Alkyds
& Acrylic Resins
Typical Characteristics
Silicone/Polyester
Resins
Silicone/Polyester
Resins
Commercial
Vehicles
Polymer Type
Reference
Modified Resins
Water-Borne Alkyds
& Acrylic Resins
Main Application Fields
NISO/Thermoplastic/ Short & Medium Oil
Thermoset Acrylics
Oxidising Alkyds
Liquid Reactive
Polyamides
Typical Characteristics
2 Pack Hydroxyl
Functional Acrylics
2 Pack Hydroxyl
Functional Acrylics
2 pack non-isocyanate acrylics
6
7
Volatile
IA max
mgKOH/g*
Typical
Viscosity
mPa.s@25°C
1K
1K
Stoving
SYNOLAC®
926 X 60 HV
27
Soya
60
Xylene
15
4500
•
•
SYNOLAC®
272 X 60
27
Soya
60
Xylene
10
2000
•
•
SYNOLAC®
5402 X 60
30
Soya
60
Xylene
12
7000
•
•
•
SYNOLAC®
5014 X 60
33
Linoleic
60
Xylene
15
3100
•
•
SYNOLAC®
3132 X 75
35
Soya
75
Xylene
10
6700
•
SYNOLAC®
8035 X 60
35
Tofa
60
Xylene
20
2500
SYNOLAC®
1035 X 60
38
Tofa
60
Xylene
15
SYNOLAC®
140 X 60
41
Soya
60
Xylene
SYNOLAC®
8008 X 75
42
Mixed
75
SYNOLAC®
947 X 65
47
Soya
SYNOLAC®
1421 WD 50
48
SYNOLAC®
78 W 50
SYNOLAC®
5053 WD 50
2K
Primer
Clearcoat
Topcoat
ACE
Car
Refinish
Commercial
Vehicles
General
Metal
Protective
Marine
Specific Properties
•
•
P
P
Good quality general purpose alkyd. NC compatible.
•
•
P
P
High quality fast drying. Good build.
P
P
P
Fast drying. General purpose.
•
P
P
P
High performance resin giving fast drying & high gloss with
excellent water spot resistance.
•
•
P
P
P
High solids air dry. VOC compliant.
•
•
•
P
Fast drying and good build.
10500
•
•
•
P
Air dry & stoving finishes and economical.
15
4000
•
•
•
P
Stoving topcoat.
Xylene
12
6000
•
65
Xylene
10
2700
•
Linseed
50
WD
10
11000
55
Linoleic
50
WS
9
53
Linseed
50
WD
12
•
•
•
•
•
•
•
•
•
•
2500
•
•
3300
•
•
•
•
P
P
P
P
High solids air dry.
P
Air drying, stoving & 2K systems, industrial finishes & ACE.
Brush applied primers & topcoat. Good through dry & chemical
resistance.
P
P
P
P
P
P
Good all round properties for ACE & Transport finishes.
Economical.
Brush applied primers & topcoat, Good through dry & chemical
resistance.
Water-Borne Alkyds
& Acrylic Resins
*calculated on the total solid content of the resin
Liquid Reactive
Polyamides
Liquid Reactive
Polyamides
Water-Borne Alkyds
& Acrylic Resins
Silicone/Polyester
Resins
Modified Resins
% NVC
Silicone/Polyester
Resins
Fatty
Acid
Type
Modified Resins
% Fatty
Acid
NISO/Thermoplastic/ Short & Medium Oil
Thermoset Acrylics
Oxidising Alkyds
Reference
NISO/Thermoplastic/
Thermoset Acrylics
Main Application Fields
Short & Medium Oil
Oxidising Alkyds
Typical Characteristics
2 Pack Hydroxyl
Functional Acrylics
2 Pack Hydroxyl
Functional Acrylics
Short and Medium Oil Oxidising Alkyds
8
9
Modified Resins
NISO/Thermoplastic/
Thermoset Acrylics
Short & Medium Oil
Oxidising Alkyds
Modified Resins
% NVC
Volatile
IA max
mgKOH/g*
Typical
Viscosity
mPa.s@25°C
Modification
1K
1K
Stoving
SYNOLAC®
5250 X 50
30
DCO
50
Xylene
20
3000
Styrene
•
•
SYNOLAC®
40 X 60
36
DCO/
Soya
60
Xylene
15
2300
Styrene
SYNOLAC®
5201 X 55
25
Linoleic
55
Xylene
18
1600
SYNOLAC®
3133 X 74
29
Soya
74
Xylene
10
SYNOLAC®
5237 S 50
34
Linoleic
50
WS/
Xylene
SYNOLAC®
7503 X 60
31
DCO
60
SYNOLAC®
443 S 60
38
Linseed/
Tofa/
Tung
SYNOLAC®
2833 X 60
33
SYNOLAC®
385 X 60
2K
Primer
Clearcoat
ACE
Car
Refinish
Commercial
Vehicles
General
Metal
Protective
Marine
Specific Properties
P
•
•
P
P
Very fast drying paints, excellent gloss, hammer
finishes.
Acrylic
•
•
P
P
P
Extremely fast dry paints, good durability, colour
retention & early water spot resistance.
7000
Acrylic
•
•
P
P
P
High solids VOC compliant. Fast air drying
alkyd, can obtain < 420g/l.
12
2000
Acrylic
•
•
P
P
Xylene
17
3500
Phenolic/Rosin
•
60
WS/MP
20
2700
Phenolic/Rosin
•
Linseed/
Tung
60
Xylene
20
5500
Phenolic/Rosin
•
38
Linoleic/
Tung
60
Xylene
12
4000
Phenolic/Rosin
•
SYNOLAC®
1180 WD 70
65
Linseed/
Tung
70
WD
16
2800
Phenolic
•
SYNOLAC®
8236 X 55
40
Linoleic
55
Xylene
6
2350
Epoxy
ester
•
SYNOLAC®
5387 X 60
40
Linoleic/
Rosin
60
Xylene
4
2000
Epoxy
ester
•
UNITHANE®
373 X 60
37
Mixed
60
Xylene
3
3500
Urethane
•
UNITHANE®
655 WD 55
61
Linoleic
55
WD
3
1650
Urethane
•
•
P
P
P
P
Fast air dry anti-corrosive primers with excellent adhesion, corrosion, salt spray & chemical
resistance.
•
P
P
P
P
Anti-corrosive primers with good drying speed,
adhesion & chemical resistance. Economical.
•
P
P
P
P
Better water resistance than the SYN 443 types
but slower drying.
•
P
P
P
P
Anti-corrosive primers with very fast drying and
early water resistance. Good adhesion and
chemical resistance.
P
Formulated for free aromatic coatings.
P
P
Air dry & stoving primers. Good adhesion & high
chemical resistance
•
•
P
•
•
•
Fast air drying paints. Aliphatic based.
Excellent durability & colour retention. Also used
for aerosol.
•
•
•
Primers for PU topcoats. Compatible with NC.
•
•
P
P
P
P
Very fast air dry. Anti-corrosion primers with good
chemical & abrasion resistance.
P
P
P
P
Anti-corrosive primers with fast dry & good
chemical resistance.
P
General purpose urethane alkyd with good
abrasion resistance and drying properties.
•
Water-Borne Alkyds
& Acrylic Resins
•
•
•
Topcoat
Silicone/Polyester
Resins
Silicone/Polyester
Resins
Fatty Acid
Type
Modified Resins
% Fatty
Acid
Reference
NISO/Thermoplastic/ Short & Medium Oil
Thermoset Acrylics
Oxidising Alkyds
Water-Borne Alkyds
& Acrylic Resins
Main Application Fields
Typical Characteristics
2 Pack
HighHydroxyl
Solids
Functional Acrylics
2 Pack Hydroxyl
Functional Acrylics
(styrenated, acrylated, phenolic, epoxy ester, urethane)
*calculated on the total solid content of the resin
Liquid Reactive
Polyamides
Liquid Reactive
Polyamides
10
11
NISO/Thermoplastic/
Thermoset Acrylics
Short & Medium Oil
Oxidising Alkyds
Polymer Type
% NVC
Volatile
IA max
mgKOH/g*
Typical
Viscosity
mPa.s@25°C
Silicone
Modification
(%)
1K
1K
Stoving
Topcoat
General
Metal
Protective
Marine
SYNOLAC®
5140 X 41
Isophthalic
Linseed Alkyd
41
Xylene
20
300
25
•
•
•
P
P
Fast air drying or stoving. Used where a combination of corrosion & heat resistance is required.
Special FA
Isophthalic
Alkyd
70
D40
10
4000
30
•
P
High quality air dry decorative topcoats with excellent weatherability.
SYNOLAC®
2700 WD 70
•
Specific Properties
*calculated on the total solid content of the resin
2 pack Hydroxyl Functional and Saturated Polyester Resins
Typical Characteristics
Main Application Fields
% OH on
solids
% NVC
Volatile
IA max
mgKOH/g*
TypicalViscosity
mPa.s@25°C
SYNOLAC®
3636 BA 80
4.3
80
Butyl Acetate
12
SYNOLAC®
1529 BA 80
5.0
80
Butyl Acetate
16
Reference
1K
1K
Stoving
2K
Primer
2500
•
5500
•
Clearcoat
Topcoat
ACE
•
•
P
•
•
P
CAN
Car
Refinish
Commercial
Vehicles
General
Metal
P
P
P
P
P
Protective
Marine
Specific Properties
Good flexibility and good compatibility with
polyesters and acrylics. Modifying resin.
P
For high build coatings — used as 2-pack PU
system.
P
Modifying resin to improve build,VOC,application
properties such as flow, gloss & DOI. Excellent
wetting, improved adhesion, chemical & salt
spray resistance. High flexibility (even down to
-25OC) & improved chip resistance. Excellent
compatibility with acrylics & polyesters.
7.6
100
—
3
900
•
•
SYNOLAC®
153 ND 60
30
60
Sol150ND
10
12000
•
•
•
•
•
P
2 piece 3 piece cans & aerosol. Excellent
flexibility & forming properties.
SYNOLAC®
267 ND 60
50
60
Sol150ND
12
3200
•
•
•
•
•
P
Overprint varnishes. Wet on wet. Also basecoat
for metal decoration applications
•
•
•
P
P
P
P
Water-Borne Alkyds
& Acrylic Resins
Water-Borne Alkyds
& Acrylic Resins
*calculated on the total solid content of the resin
Silicone/Polyester
Resins
SYNOLAC®
5085
Modified Resins
Modified Resins
Reference
NISO/Thermoplastic/ Short & Medium Oil
Thermoset Acrylics
Oxidising Alkyds
Silicone/Polyester
Resins
Main Application Fields
Typical Characteristics
2 Pack Hydroxyl
Functional Acrylics
2 Pack Hydroxyl
Functional Acrylics
Silicone Modified Resins
Liquid Reactive
Polyamides
Liquid Reactive
Polyamides
12
13
NISO/Thermoplastic/
Thermoset Acrylics
Polymer Type
% NVC
Volatile
IA max
mgKOH/g*
Typical
Viscosity
mPa.s@23°C
1K
1K
Stoving
SYNAQUA®
811 S 48
Acrylic
48
Alcohol/
water
—
10000
•
•
SYNAQUA®
2350 EP 60
Epoxy Ester
60
Ethoxy
Propanol
70
3250
•
•
SYNAQUA®
3510 SW 80
Modified
OFPE
80
PGDME
55
20000
•
•
SYNAQUA®
4804
Alkyd
50
Water
—
<300
•
Reference
Primer
Topcoat
ACE
•
•
•
•
•
•
•
•
CAN
Commercial
Vehicles
General Metal
Protective
Marine
Specific Properties
In water soluble stoving systems to eliminate cissing &
other defects.
P
Good adhesion to glass.
P
P
P
P
P
2-pack PU topcoats with high gloss, good chemical
resistance & corrosion resistance.
Extremely low VOC content, high gloss.
P
Water-Borne Acrylic Emulsions
Main Application Fields
Typical Characteristics
% NVC
MFFT
Ph
Typical
Viscosity
mPa.s@23°C
1K
2K
ENCOR®
2171
Acrylic
43
44
7.5
<1000
•
•
ENCOR®
2401
StyreneAcrylic
43
40
7.5
<5000
•
•
ENCOR®
2433
Functional
Acrylic
50
20
9
<2000
•
•
Primer
Topcoat
DTM
ACE
Transportation
•
•
•
P
P
General
Metal
Protective
Marine
P
P
P
P
Recommended binder for metal primer.
P
P
Based on Arkema’s SECHA* new technology, ENCOR* 2433 is
suitable for Direct to Metal application. Main benefits are exceptional
barrier properties, quick drying, good gloss and adhesion on different
metallic substrates.
Specific Properties
Fast drying and good chemical resistance (1.3% OH on solids).
Water-Borne Alkyds
& Acrylic Resins
Water-Borne Alkyds
& Acrylic Resins
*SElf Crosslinking Hydrophobic Acrylic Silicone/Polyester
Resins
Polymer Type
Modified Resins
Modified Resins
2K
*calculated on the total solid content of the resin
Reference
Silicone/Polyester
Resins
Main Application Fields
NISO/Thermoplastic/ Short & Medium Oil
Thermoset Acrylics
Oxidising Alkyds
Short & Medium Oil
Oxidising Alkyds
Typical Characteristics
2 Pack Hydroxyl
Functional Acrylics
2 Pack Hydroxyl
Functional Acrylics
Water-Borne Alkyds
Liquid Reactive
Polyamides
Liquid Reactive
Polyamides
14
15
NISO/Thermoplastic/
Thermoset Acrylics
Short & Medium Oil
Oxidising Alkyds
Main Application Fields
Reference
% NVC
Volatile
Amine
Value mg
KOH/g*(1)
Total Amine
Value mg
KOH/g*(2)
Typical
Viscosity
mPa.s@25°C
Active
Hydrogen
Equivalent wt*
2K
Primer
ACE
Commercial
Vehicles
General
Metal
Protective
Marine
CRAYAMID®
100 X 60
60
Xylene
83-93
—
4500
475
•
•
P
P
P
P
CRAYAMID®
115
100
—
•
•
P
P
P
P
•
•
P
P
P
P
55000
(40°C)
210-220
230-260
240
Specific Properties
Protective coatings with good flexibility, adhesion & long pot life.
General purpose epoxy/polyamide coatings with excellent corrosion
resistance.
CRAYAMID®
115 X 70
70
Xylene
CRAYAMID®
125
100
—
290-320
340-380
9000 (40°C)
130
•
•
P
P
P
P
High build epoxy/polyamide coatings. Epoxy based adhesives & castings.
CRAYAMID®
140
100
—
350-400
370-410
4500 (40°C)
95
•
•
P
P
P
P
Epoxy based castings, laminates & adhesives. Solventless epoxy/
polyamide coatings.
CRAYAMID®
195 X 60
60
Xylene
205-225
240-270
4500
240
•
•
P
P
P
P
Very fast surface dry, compatible with liquid epoxy resins & no induction
period required.
CRAYAMID®
230 X 60
60
Xylene
185-195
200-230
2250
280
•
•
P
P
P
P
General purpose polyamide adduct, good compatibility & shorter induction
period.
1500
NISO/Thermoplastic/ Short & Medium Oil
Thermoset Acrylics
Oxidising Alkyds
Modified Resins
using hydrochloric acid method
using per-chloric acid method
*calculated on the total solid content of the resin
(1)
(2)
Silicone/Polyester
Resins
Water-Borne Alkyds
& Acrylic Resins
Water-Borne Alkyds
& Acrylic Resins
Silicone/Polyester
Resins
Modified Resins
Typical Characteristics
2 Pack Hydroxyl
Functional Acrylics
2 Pack Hydroxyl
Functional Acrylics
Liquid Reactive Polyamides
Liquid Reactive
Polyamides
Liquid Reactive
Polyamides
16
17
Resins for Industrial Wood
Coatings
Different technologies are available to satisfy the market demands, although
there are important geographical differences in their use in the European wood
industry derived from numerous factor such as local tastes, company size,
available application system, and environmental pressures or types of wooden
substrates used.
The different types of industrial
wood coatings are usually classified
by technologies in function of their
chemical nature or the drying/curing
system.
The position of Arkema Coating Resins,
as a supplier of products for all the
technologies present in the Industrial
Wood Finishing market gives us a
global view of the market challenge,
18
which make it possible to offer
innovative solutions in a changing
environment. Our main fields of
research work are in Waterbased
and UV curing technologies.
19
Water-Borne
Polyurethane
Joinery
Furniture
Flat-Stock
Polymer type
Non volatile (%)
Typical Viscosity in
mPa.s@23°C
pH
MFFT °C
Primers
ENCOR® 2121
Acrylic/alkyd
41
<100
8.5
3
•
ENCOR® 2124
Acrylic
43
<100
7.5
3
•
•
Joinery topcoats with good outdoor durability.
ENCOR® 2166
Acrylic
43
<200
8.0
<1
•
•
Good blocking resistance and durability. Clear and
pigmented joinery topcoats.
ENCOR® 2167
Acrylic
44
<3000
7.5
46
•
•
•
•
ENCOR® 2171
Acrylic
43
<1000
7.5
44
•
•
•
•
ENCOR® 2173
Acrylic
40
<100
7.5
43
•
•
•
•
ENCOR® 2180
Styrene/acrylic
43.5
1000
8.5
30
ENCOR® 2181
Styrene/acrylic
43.5
1000
8.5
52
ENCOR® 2229
Acrylic
50
<500
4.5
10
•
General purpose alkali-soluble for panelling.
Excellent transfer efficiency.
ENCOR® 2341
Vinyl versatate
50
4500
4.5
<5
•
Combinations with alkali-soluble for cost-efficient
fillers.
ENCOR® 2455
Styrene/acrylic
41
<150
6.5
60
ENCOR® 2511
Acrylic
47
<550
8.3
6
•
Combinations with alkali-soluble so as to improve
water resistance.
ENCOR® 2701
Acrylic
50
<100
4.0
59
•
High Tg alkali-soluble for roller applied fillers for
panelling.
ENCOR® 2710
Acrylic
42
<200
8.5
4
•
Low MFFT binder for stain-blocking primers.
ENCOR® 2711
Acrylic
43
<1000
9.0
15
•
Sandable stain-blocking primers.
ENCOR® 2716
Acrylic
40
<100
8.0
<1
•
•
•
•
UV curable dispersion. Tack-free before UV. Good
grain definition in open pore finishes.
ENCOR® 2718
Acrylic
45
<1000
8.0
<0
•
•
•
•
UV curable dispersion. High functionality. Hardness, scratch and chemical resistance.
ENCOR® 2763
Acrylic
41
<500
8.5
20
•
•
•
•
Multipurpose emulsion for 1K, 2K + NCO and UV
curable finishes for furniture.
SNAP® 2147
Acrylic
43
<1000
8.0
8
•
•
•
•
Self crosslinking emulsion for combination with UV
curable acrylic emulsions.
Reference
Topcoats
Clear
Sealers
Clear
Topcoats
Pigmented
Sealers
Pigmented
Topcoats
Panelling
Parquet
Joinery primers with good penetration into wood.
•
•
•
•
•
Self-crosslinking emulsion for furniture. Fast
hardening and sanding.
High water resistant primers and fillers applied on
wood panels.
•
•
Self-crosslinking emulsion for furniture. Excellent
appearance on wood and sandability.
Dual-cure self-crosslinking and hydroxy functional.
Fast drying 2 K PU. (1.3% OH on solids).
Cost effective furniture lacquers with excellent water
and stains resistance.
•
•
Wood stains with homogeneous colouring effect.
21
Acid Curing/
UV Radiation Curing
• Highly Recommended
• Suitable
20
Specific Properties
Polyurethane/
Nitrocellulose
Polyurethane/
Nitrocellulose
Typical Characteristics
Polyurethane
Acid Curing/
UV Radiation Curing
Main Application Fields
Water-Borne APEO
Free Emulsions
Water-Borne
APEO Free Emulsions
APEO FREE EMULSIONS
Polyurethane
Polyurethane
Fatty acid
content (%)
Fatty acid
type
% OH
on solids
Acid value
(max.)
mgKOH/g
Non volatile (%)
Volatile
Typical Viscosity in
mPa.s@25°C
SYNOLAC®
3315 BA 70
30
HCO
4.2
26
70
Butyl Acetate
3800
SYNOLAC®
5576 S 65
30
Mixed
5.0
15
65
Xylene/MEK
13000
•
•
•
General purpose resin for fast drying sealers and topcoats.
SYNOLAC®
7035 S 55
30
Mixed
5.6
22
55
Xylene/MEK
12600
•
•
•
Cost efficient sealers. Excellent sandability and recoatability.
SYNOLAC®
2126 S 75
30
Mixed
3.5
22
75
Xylene/MEK
10000
•
•
•
Fast drying clear topcoats. Combinations with high viscosity
resins.
SYNOLAC®
3364 DBA 80
31
Linoleic
4.0
22
80
Butyl Acetate
12000
•
•
•
Fast drying topcoats with excellent levelling.
SYNOLAC®
7025 S 50 HV
31
Mixed
4.8
22
50
Xylene/MEK
11200
•
SYNOLAC®
1949 X 70
31
Saturated
3.8
10
70
Xylene
5500
SYNOLAC®
7312 X 60
33
Mixed
5.0
15
60
Xylene
6250
SYNOLAC®
8465 X 60
35
Mixed
4.5
22
60
Xylene
6500
SYNOLAC®
7806 X 75
36
Mixed
4.4
17
75
Xylene
4200
SYNOLAC®
377 BA 70
36
Mixed
5.7
30
70
Butyl Acetate
1900
SYNOLAC®
5514 DBA 80
37
Mixed
3.7
10
80
Butyl Acetate
3100
SYNOLAC®
5512 X 60
41
Castor
4.7
23
60
Xylene
2200
SYNOLAC®
1567 X 60
44
Mixed
4.5
15
60
Xylene
4000
•
•
Good compatibility with isocyanurates. Sealers and matt
finishes.
SYNOLAC®
8467 DBA 75
44
Mixed
4.5
15
75
Butyl Acetate
7000
•
•
Good compatibility with isocyanurates. Sealers and matt
finishes.
SYNOLAC®
8475 X 60
51
Castor
5.2
16
60
Xylene
1800
SYNOLAC®
539 BA 70
53
Castor
4.2
15
70
Butyl Acetate
2600
Reference
Clear Sealers
Clear
Topcoats
Pigmented
Sealers
•
•
•
•
•
Pigmented
Topcoats
•
•
•
High gloss topcoats. Compatible with acrylic resins.
•
High gloss non yellowing pigmented topcoats for kitchen
cabinet.
•
Sealers and topcoats mainly crosslinked with isocyanurates.
Topcoats with excellent levelling and mar resistance.
•
•
Long pot life. Combinations with high viscosity resins.
•
•
Pigmented sealers and topcoats.
•
High solids formulations.
•
•
•
•
•
•
Flexible resin for highly pigmented sealers.
Highly pigmented fillers for wood and MDF.
•
Good flexibility. Highly pigmented sealers.
• Highly Recommended
• Suitable
22
23
Acid Curing/
UV Radiation Curing
•
Specific Properties
Version in xylene of 7025 DBA 65.
•
•
Parquet
Polyurethane/
Nitrocellulose
Polyurethane/
Nitrocellulose
Main Application Fields
Polyurethane
Acid Curing/
UV Radiation Curing
Typical Characteristics
Water-Borne
APEO Free Emulsions
Water-Borne
APEO Free Emulsions
Alkyd Resins
Polyurethane
Main Application Fields
Non volatile (%)
Volatile
% OH
on solids
Acid Value
(max.)
mg.KOH/g.
Typical Viscosity
in mPa.s@25°C
SYNOCURE®
210 BA 40
40
Butyl Acetate
1.0
12
SYNOCURE®
213 BA 50
50
Butyl Acetate
1.3
SYNOCURE®
862 X 60
60
Xylene
SYNOCURE®
7120 S 50
50
SYNOCURE®
225 BA 50
50
Reference
Clear
Sealers
Clear
Topcoats
Pigmented
Sealers
Pigmented
Topcoats
3000
•
•
•
12
2600
•
•
•
1.5
8
6800
•
Xylene/Butyl Acetate
1.6
10
5000
•
•
•
•
Used for non yellowing clear and pigmented finishes.
Butyl Acetate
2.0
25
3000
•
•
•
•
Fast hardening. Excellent chemical resistance.
Specific Properties
Fast drying and hardening without CAB.
•
•
Quick solvent release and good hardness.
Primers with good adhesion on melamine substrates.
• Highly Recommended
• Suitable
Polyurethane
Polyurethane
Typical Characteristics
Water-Borne
APEO Free Emulsions
Water-Borne
APEO Free Emulsions
Acrylic Resins
NITROCELLULOSE
ALKYD Resins
Typical Characteristics
Polyurethane/
Nitrocellulose
Volatile
Typical Viscosity
in mPa.s@25°C
15
60
Xylene
Peanut
12
75
38
Soya
20
43
Rapeseed
10
Fatty acid type
Acid value
(max.)
mg.KOH/g.
SYNOLAC®
8026 X 60
26
Linoleic
SYNOLAC®
8000 BA 75
38
SYNOLAC®
8036 BA 75
SYNOLAC®
435 BA 70
Clear
Sealers
Clear
Topcoats
Pigmented
Sealers
Pigmented
Topcoats
4500
•
•
•
•
Butyl Acetate
4000
•
•
75
Butyl Acetate
2500
•
•
•
•
Filling power. Sandability.
70
Butyl Acetate
1800
•
•
•
•
General purpose resin.
Specific Properties
Cost efficient NC finishes.
Fast drying. Good blocking resistance.
Polyurethane/
Nitrocellulose
Non volatile (%)
Fatty acid
content (%)
Reference
Main Application Fields
Acid Curing/
UV Radiation Curing
Acid Curing/
UV Radiation Curing
• Highly Recommended
• Suitable
24
25
Acid Curing
Main Application Fields
Fatty acid
content (%)
Fatty acid type
Acid value (max.)
mg.KOH/g.
Non volatile (%)
Volatile
Typical Viscosity
in mPa.s@25°C
SYNOLAC®
350 S 65
20
Linoleic
7
67
Ethanol/MP/
Isobutanol
SYNOLAC®
8030 E 75
36
Linoleic
30
75
SYNOLAC®
8036 BA 75
38
Soya
20
SYNOLAC®
435 BA 70
43
Rapeseed
SYNOLAC®
1649 XA 70
45
Linoleic
Reference
Clear
Sealers
Clear
Topcoats
Pigmented
Sealers
Pigmented
Topcoats
ParquetLacquers
Specific Properties
1600
•
•
•
•
•
Precondensated Alkyd/Amino. Low formaldehyde emission furniture lacquers.
Ethanol
4000
•
•
•
•
Aromatic-free high solids AC lacquers.
75
Butyl Acetate
2500
•
•
•
•
Long pot-life. Pre-catalyzed lacquers.
10
70
Butyl Acetate
1800
•
•
•
•
Versatile binder for AC and NC lacquers.
25
70
Xylene/Butanol
4000
•
•
•
•
General purpose 2 pack lacquers.
• Highly Recommended
• Suitable
Polyurethane
Polyurethane
Typical Characteristics
Water-Borne
APEO Free Emulsions
Water-Borne
APEO Free Emulsions
ALKYD Resins
UV RADIATION CURING
Unsaturated Polyester resins
Main Application Fields
Typical Characteristics
Monomer
Acid value
(max.)
Typical Viscosity
in mPa.s@25°C
SYNOLAC®
2097 M 65
—
DPGDA
30
SYNOLAC®
7913 M 70
—
DPGDA
SYNOLAC®
9970
—
—
Clear
Topcoats
Pigmented
Sealers
Pigmented
Topcoats
10000
•
•
•
•
Styrene free topcoats. Good surface curing and levelling.
30
12500
•
•
•
•
Styrene free systems. Adhesion improvement in high thickness layers. Easy to matt.
30
20000
•
•
•
•
Styrene free systems. High gloss non Xi topcoats.
Specific Properties
• Highly Recommended
• Suitable
Acid Curing/
UV Radiation Curing
Acid Curing/
UV Radiation Curing
Polyurethane/
Nitrocellulose
Clear
Sealers
Polyurethane/
Nitrocellulose
Non volatile (%)
Reference
26
27
Europe
Americas
Africa
eadquarters
H
- Arkema - Colombes, France
- Coatex - Genay, France
eadquarters
H
- Arkema Coating Resins - Cary, NC
- Arkema Inc. - King of Prussia, PA
Production Facilities
- Isipingo Durban, South Africa - Coating Resins
T echnical and R&D Centers
- Boretto, Italy - Coating Resins
- Genay, France - Coatex
- Sant Celoni, Spain - Coating Resins
- Verneuil, France - Coating Resins - Sartomer
roduction Facilities
P
- Boretto, Italy - Coating Resins
- Brummen, The Netherlands - Coating Resins
- Drocourt, France - Coating Resins
- Gissi, Italy - Coating Resins
- Genay, France - Coatex
- Moerdijk, The Netherlands - Coatex
- Mollet, Spain - Coating Resins
- Sant Celoni, Spain - Coating Resins
- Stallingborough, United Kingdom - Coating Resins
- Villers St-Paul, France - Coating Resins - Sartomer
- Zwickau, Germany - Coating Resins
Technical and R&D Centers
- Araçariguama, Brazil - Coatex Coating Resins
- Cary, NC - Coating Resins
- Chester, SC - Coatex
- King of Prussia, PA
- North Kansas City, MO - Coating Resins
Asia
Headquarters
- Arkema Greater China - Shanghai, China
- Arkema K.K. - Tokyo, Japan
Technical and R&D Centers
- Changshu, China - Coatex
- Guangzhou, China - Sartomer - Coating Resins
Production Facilities
- Kyoto Technical Center, Japan
- Alsip, IL - Coating Resins
- Navi Mumbai, India - Coating Resins
- Araçariguama, Brazil - Coatex - Coating Resins
- Pasir Gudang, Malaysia - Coating Resins
- Chester, SC - Coatex
- Grand Rapids, MI - Coating Resins
Production Facilities
- North Kansas City, MO - Coating Resins
- Changshu, China - Coatex - Coating Resins - Kynar
- Saint Charles, LA - Coating Resins
- Kunsan, Korea - Coatex
- Saukville, WI - Coating Resins
- Navi Mumbai, India - Coating Resins
- Torrance, CA - Coating Resins
- Pasir Gudang, Malaysia - Coating Resins
28
29
European Regional
Headquarters
Arkema Coating Resins
420, rue d’Estienne d’Orves
92700 Colombes - France
Asia Pacific Regional
Headquarters
Arkema (China) Investment Co., Ltd.
Shanghai Branch
6/F, Block 1, Life Hub @ Daning
1868 Gonghexin Road
Shanghai 200072, P.R. China
Tel: + 86 21 6147 6888
Fax: + 86 21 6147 6777 / 6746
ARKEMA - A limited liability company with capital of 628.772.150 euros - Cook Marcomm Form No. 323-00002 2/13
Global Headquarters +
Americas
Arkema Coating Resins
410 Gregson Dr.
Cary, NC, (USA) 27511
+1 919-469-6700
Customer Service
Americas
1-866-837-5532 (toll free)
+1-919-469-6700
Europe
+33 (0)1 49 00 79 44
China
+86 21 6147 6888 (324)
Asia Pacific (excluding China)
+603-7839-5888
+33 (0)1 49 00 79 44
IMPORTANT: The statements, technical information and recommendations contained herein are believed to be accurate as of the date hereof. Since the
conditions and methods of use of the product and of the information referred to herein are beyond our control, Arkema expressly disclaims any and all
liability as to any results obtained or arising from any use of the product or reliance on such information; NO WARRANTY OF FITNESS FOR ANY
PARTICULAR PURPOSE, WARRANTY OR MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS
DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The information provided within relates only to the specific product designated and may not be
applicable when such product is used in combination with other materials or in any process. The user should thoroughly test any application before
commercialization. Nothing contained herein constitutes a license to practice under any patent and it should not be construed as an inducement to infringe
any patent and the users is advised to take appropriate steps to be sure that any proposed use of the product will not result in patent infringement.
The product data provided in this document are typical values, intended only as guides, and should not be construed as sales specifications.
420, rue d’Estienne d’Orves
92705 Colombes Cedex – France
Tél. : 33 (0)1 49 00 80 80
Fax : 33 (0)1 49 00 83 96
arkema.com
arkemacoatingresins.com
Encor®, Synaqua®, Synocure®, Synolac®,
Synocryl®, Unithane®, Crayamid® and
SNAP® are registered trademarks of Arkema Inc.