EnLay Sign Series - Your Sign Company

Your Sign Company, LLC
1212 N. Tancahua St. Corpus Christi, TX 78401
www.yoursigncompany.net 361-884-6876 ph/ 361-887-2109 fax
[email protected]
EnLay Sign Series
Embedded Tactile Graphics and Grade 2 Braille
CMBL / HUB CERTIFIED#1371590572800
TX SBA Women Owned Business #801184967
PART 1 - GENERAL
WBENC National Certificate #2005119902
For use in areas prone to vandalism. EnLay Sign
Series is an attractive, yet highly vandal resistant
ADA compliant sign created by using raised
text that is embedded below the surface and by
inserting machined and pressed Grade 2 Braille.
This sign is made from 1/8” thick, non-glare
acrylic, however it can be made from diverse
materials.
Available Options:
•
Window inserts
•
Subsurface graphics - full color available
•
Frame options
SECTION 10 14 00 - SIGNAGE
1.01 SECTION INCLUDES
A. Room Identification Signs
1.02 SUBMITTALS
A. Supplier must be in business for minimum of 4 years making
comparable products and provide a 10 year Limited Warranty and able
to provide references upon request.
B. Manufacturer’s descriptive literature to include color selection.
C. Shop drawings with letter style, general layout for each sign type, with
sizes, edge and corner treatment, and mounting methods shown.
D. Submit one sample illustrating methods of raised symbols and copy as
required per ADA (Americans with Disabilities Act - 2004) &
ANSI A117.1-2003.
1.03 QUALITY ASSURANCE
A. ATBCB-ADAAG - Americans with Disabilities Act Accessibility
Guidelines (ADA); 2004
B. ANSI/ICC A117.1 - American National Standard for Accessible and
Usable Buildings and Facilities; International Code Council; 2003
C. Texas Accessibility Standards (TAS)
PART 2. PRODUCTS
2.01 Manufacturer shall provide raised laminated signs of one/two tone;
EnLay Series, Your Sign Company, LLC
Raised messages shall consist of construction containing the following:
A. Raised Tactile Grade 2 Braille shall be integrated into the sign face and
be raised 1/32”. Glass or metallic rasters to have .059 surface diameter
with body of sphere pressure secured below face laminate. Glued on
dots will NOT be acceptable.
B. Raised symbols shall be 3” high, raised 1/32” from sign face and
chemically welded with the acrylic sign core.
C. All raised lettering shall be 5/8” high (3” max), raised 1/32” and
chemically welded with the acrylic sign core; letter style to be Sans Serif
fonts (all upper case).
D. All copy (lettering, numbering & symbols shall have a contrast with
their background and matte finish.
2.02 Sign face and back shall be of laminate or acrylic with a core of 1/8” or 1/4”
acrylic as required.
ant
r
r
a
W
ited
m
i
L
*
r
10-yea e in the USA
*Mad
y
2.03 Suppliers: As provided and installed by Your Sign Company, LLC.
1212 N. Tancahua St. Corpus Christi, TX 78401
(361)884-6876 ph / (361)887-2109 fax
PART 3 - EXECUTION
3.01 Installation shall be by means of double sided tape and silicone; installed
level within 60” off finished floor to center line of sign on the wall adjacent
to the latch side of door. Where there is no wall space, including double
leaf doors, sign shall be placed on the nearest adjacent wall.
For complete listing of all regulations published in the Dept. of Justice Federal Register,
Contact the Office of Americans with Disabilities Act at (800) 514-0301 voice, (800) 514-0383 TTY.
Beige
ADA Alternative Colors