Soleic™ Cabinet Specifications

Soleic™ Cabinet Specifications General Information Cabinet Construction Hinges Drawers Roll‐out Trays Shelves Cabinet Sides Cabinet Backs Corner Joints Toe Kicks Cabinet Legs Waterproof solid marine‐grade polymer
FDA approved for food‐safe contact
Solid material with color through entire thickness
UV stabilized for direct sun exposure
304 stainless steel 110º self‐closing hinge
Interlocking joints/hardware‐free construction
Hardware‐free drawer slide
50 pound load capacity
Stainless steel full‐extension drawer slides
50 pound load capacity
3/4" solid marine‐grade polymer
Recessed shelf‐pin cutouts
50 pound load capacity
3/4" solid marine‐grade polymer
Pre‐drilled (partially) to attach adjacent cabinets
Stainless‐steel through‐bolts for fastening to adjacent cabinets 3/4" solid marine‐grade polymer
Hardware‐free interlocking joint
3/4" solid marine‐grade polymer – removable (optional accessory) High‐impact nylon construction
Adjustable from 3 1/2" to 4 1/2" for leveling
Model Naming Convention Door Orientation Model numbers contain information about the type, size, and orientation of the cabinet.
The “Left” or “Right” designation indicates the side with the hinge. Cabinets 21” and wider have double doors.
B 15 D R
Right
Drawer Width = 15 Type = Base Example: B‐15‐D‐R = Base cabinet, 15” wide, with a Drawer, Right‐hand door W 18 42 L Left
Height = 42 Width = 18 Type = Wall Example: W1842L = Wall cabinet, 18” wide, 42” tall, Left‐hand door Adjustable Legs All base cabinets include adjustable legs necessary to level the cabinets on uneven surfaces. The legs adjust from 3 ½” tall to 4 ½”. Please account for the adjustable leg height when planning your project. Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 1
Rev 2.13
Soleic™ Cabinet Specifications Cabinet Dimensions Standard Cabinet Depth Standard depth cabinets are 24 3/16” from the back of the cabinet to the front of the door face. Grill Cabinet Depth Grill cabinets are 27 3/16” from the back of the cabinet to the front of the door face.
Wall Cabinet Depth The standard depth of wall cabinets is 14 15/16” from the back of the cabinet to the front of the door face.
Bar Height (Bi‐Level) Cabinet Dimensions Bar Height (Bi‐Level) cabinets are 28 15/16” from the back of the cabinet to the front of the door face. The raised bar section is 6” tall, and 4 ¾” deep. All Bar height cabinets come with decorative back panels. Most base cabinet models are available in bi‐level models.
Cabinet Back Dimensions Decorative Back Panel Dimensions Closeup of one cabinet without decorative back panel. Closeup of two cabinets with decorative back panel. All cabinets come standard with a solid 3/4” back. The sides of the cabinet are solid 3/4” material. Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Adding a decorative back panel creates a solid seamless back panel. 3/4” thick decorative back panels are custom‐cut with a 1/4” dado to precisely fit your cabinet layout. The overall cabinet depth increases 1/2” when adding a decorative back panel. Decorative back panels longer than 96” will have seams.
Page 2
Rev 2.13
Soleic™ Cabinet Specifications Wall Cabinets Single Door Double Door W912 W1212 W1512 W1812 W915 W1215 W1515 W1815 W918 W1218 W1518 W1818 W921 W1221 W1521 W1821 W924
W1224 W1524 W1824 W930 W1230 W1530 W1830 W936 W1236 W1536 W1836 W942 W1242 W1542 W1842
W2112
W2412 W2712 W2115 W2415 W2715 W2118 W2418 W2718 W2121 W2421 W2721
W2124
W2424 W2724 W2130 W2430 W2730 W2136 W2436 W2736 W2142 W2442 W2742
Single door cabinets are available in widths between 9” and 18”, in heights from 12” to 42”. Cabinets can be ordered with a Left or Right door opening Double door cabinets are available in widths between 21” and 27”, in heights from 12” to 42”.
Open Shelf Wall – 1 shelf Open Shelf Wall – 2 shelves OSW1230
OSW1530 OSW1830 OSW2130 OSW2430 OSW2730 OSW1236
OSW1536 OSW1836 OSW2136 OSW2436 OSW2736 Open shelf wall cabinets are available in widths of 12” to 27”. The 30” tall model has one adjustable shelf. Open shelf wall cabinets are available in widths of 12” to 27”. The 36” tall model has two adjustable shelves. Open Shelf Wall – 3 shelves Wall Bookcase – 1 shelf OSW1242
OSW1542
OSW1842
OSW2142
OSW2442
OSW2742
WBKC‐1230
WBKC‐1530 WBKC‐1830 WBKC‐2130 WBKC‐2430 WBKC‐1236 WBKC‐1536 WBKC‐1836 WBKC‐2136 WBKC‐2436 Open shelf wall cabinets are available in widths of 12” to 27”. The 42” tall model has three adjustable shelves. Wall bookcase cabinets are available in widths from 12” to 24”. The 30” and 36” models have one fixed shelf. Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 3
Rev 2.13
Soleic™ Cabinet Specifications Wall Cabinets (continued) Wall Bookcase – 2 shelves Microwave Wall WBKC‐1242
WBKC‐1542 WBKC‐1842 WBKC‐2142 WBKC‐2442 MC‐2430
MC‐2730 MC‐2436 MC‐2736 MC‐2442 MC‐2742 Wall bookcase cabinets are available in widths from 12” to 24”. The 42” model has two fixed shelves. Microwave wall cabinets feature an open area with an extended base to hold a microwave. They are available in 24” or 27” wide models with heights of 30”, 36”, or 42”
Blind Corner Wall BWC‐4224 BWC‐4230 BWC‐4236 BWC‐4242 “Left” Model Shown Blind corner wall cabinets are available in 24”, 30”, 36”, or 42” high models.
Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 4
Rev 2.13
Soleic™ Cabinet Specifications Base Cabinets Base with 1 Full Height Door Base with 2 Full Height Doors B‐9
B‐12 B‐15 B‐18 B‐21
B‐24 B‐27 B‐30 Base cabinets with one full‐height door are available in widths from 9” to 18”. The cabinet interior has 2 adjustable shelves.
Base cabinets with two full‐height doors are available in widths from 21” to 30”. The cabinet interior has 2 adjustable shelves.
Base with 1 Drawer and 1 Door Base with 1 Drawer and 2 Doors B‐9‐D
B‐12‐D B‐15‐D B‐18‐D B‐21‐D
B‐24‐D B‐27‐D B‐30‐D Base cabinets with one drawer and one door are available in widths from 9” to 18”. The drawer features a maintenance‐
free, hardware‐free drawer slide. The cabinet interior has 1 adjustable shelf. Base cabinets with one drawer and two doors are available in widths from 21” to 30”. The drawer features a maintenance‐
free, hardware‐free drawer slide. The cabinet interior has 1 adjustable shelf.
Base with 3 Drawers Base with 4 Drawers DB‐12‐3
DB‐15‐3 DB‐18‐3 DB‐21‐3 DB‐24‐4
Base cabinets with three drawers are available in widths from 12” to 21”. The drawers features maintenance‐free, hardware‐
free drawer slides. Base cabinets with four drawers are available in 24” width. The drawers features maintenance‐free, hardware‐free drawer slides.
Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 5
Rev 2.13
Soleic™ Cabinet Specifications Sink Base Cabinets Sink Base with False Drawer and 1 Door Sink Base with 1 Full Height Door SB‐9
SB‐12 SB‐15 SB‐18 SBFH‐9
SBFH‐12 SBFH‐15 SBFH‐18 Sink base cabinets with a drawer façade and one door are available in widths from 9” to 18”. Sink base cabinets with one full‐height door are available in widths from 9” to 18”.
Sink Base with False Drawer and 2 Doors Sink Base with 2 Full Height Doors SB‐21
SB‐24 SB‐27 SB‐30 SB‐33 SB‐36 SB‐39 SBFH‐21
SBFH‐24 SBFH‐27 SBFH‐30 SBFH‐33 SBFH‐36 SBFH‐39 Sink base cabinets with a drawer façade and two doors are available in widths from 21” to 39”. Sink base cabinets with two full‐height doors are available in widths from 21” to 39”.
Sink Base with False Drawer and 3 Doors Sink Base with 3 Full Height Doors SB‐42
SB‐45 SB‐48 SB‐51 SB‐54 SB‐57 SBFH‐42
SBFH‐45 SBFH‐48 SBFH‐51 SBFH‐54 SBFH‐57 Sink base cabinets with a drawer façade and three doors are available in widths from 42” to 57”. Sink base cabinets with three full‐height doors are available in widths from 42” to 57”.
Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 6
Rev 2.13
Soleic™ Cabinet Specifications Grill & Side Burner Cabinets Note: Grills placed in Soleic™ cabinetry must have an insulated liner built by the grill manufacturer. Insulated liners are available from most premium grill manufacturers. Soleic™ is not responsible for damage caused by installing a grill without proper insulation as recommended by the grill manufacturer. Grill Bases When ordering grill cabinets, please specify the exact cutout size required for the cabinet’s face plate: A = Width B = Height Please account for the countertop height when measuring dimension B. C = Depth Dimension C will not change the cabinet’s depth. Soleic would like to verify that the grill cabinet will be deep enough to accommodate the grill. For some grills, a custom depth cabinet is required. DG‐27* DG‐30* DG‐33* DG‐36* DG‐39** DG‐42** DG‐45** DG‐48** DG‐51** DG‐54** DG‐57** *=2 doors **=3 doors Grill cabinets are available in sizes from 27” to 57”. Please note, this measurement is the outside width of the cabinet, not the interior cutout space for the grill. All grill and side burner cabinets include a custom‐cut face plate to exactly match the profile of your grill. When ordering grill cabinets, order the grill cabinet 4” larger than the insulated jacket’s width. When ordering a grill from another supplier, it is your responsibility to include the exact measurements for the custom cut.
Side Burner Base Range Base Side‐15*
Side‐18* Side‐21**
Side‐24**
*=1 door **=2 doors
RB‐33
RB‐36 Range cabinets are available in widths of 33” to 36”. Range cabinets are for use with countertop‐mounted ranges or grills. Please verify the appliance manufacturer’s specifications for clearance distances to combustible materials. Side burner cabinets are available in widths from 15” to 24” and include a custom cut face plate the same as grill cabinets. Please specify all dimensions “A”, “B”, and “C” when ordering side burner cabinets as when ordering grill cabinets. Order side burner cabinets 4” larger than the width of the side burner. Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 7
Rev 2.13
Soleic™ Cabinet Specifications Specialty Base Cabinets Blind Base Open Base BBC‐42
OBC‐9
OBC‐12 OBC‐15 OBC‐18 OBC‐21 OBC‐24 OBC‐27 OBC‐30 “Left” Model Shown Blind base cabinets are available in Left and Right models, 42” wide. The blind corner cabinet allows a run of base cabinets to turn a 90 degree corner with storage and connect other standard depth bases. Open base cabinets are available in widths from 9” to 30”. They feature two adjustable shelves.
Pull‐Out Tray Pull‐Out Tray with Drawer POT‐15
POT‐18 POT‐21* POT‐24* *=double door POT‐15‐D
POT‐18‐D POT‐21‐D* POT‐24‐D* *=double door Pull out tray cabinets with full height doors feature three pull‐
out trays with full extension stainless steel drawer slides. Pull out tray cabinets are available from 15” to 24” wide.
Pull out tray cabinets with a drawer feature two pull‐out trays with full extension stainless steel drawer slides. Pull out tray cabinets are available from 15” to 24” wide.
2‐Door Pantry 4‐Door Pantry PC1860
PC1872 PC1884 PC2460
PC2472 PC2484 The 4‐door pantry cabinet is 24” wide, and is available in heights of 60”, 72”, or 84” off the finished floor. Pantry cabinets must be anchored to a wall for added stability.
The 2‐door pantry cabinet is 18” wide, and is available in heights of 60”, 72”, or 84” off the finished floor. Pantry cabinets must be anchored to a wall for added stability.
Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 8
Rev 2.13
Soleic™ Cabinet Specifications Trash & LP Tank Storage Cabinets Trash Storage Trash Storage with Drawer TC‐15
TC‐18 TC‐15‐D
TC‐18‐D Trash Storage cabinets are available in 15” or 18” wide models with a single drawer.
Trash Storage cabinets are available in 15” or 18” wide models with a full height door. LP Tank Storage LP Tank Storage with Drawer LPC‐18
LPC‐18‐D
The LP Tank storage cabinet with a full height door is available in 18” width. The cabinet features a pull‐out tray with a circular cutout to accommodate an LP tank. The LP Tank storage cabinet with a single drawer is available in 18” width. The cabinet features a pull‐out tray with a circular cutout to accommodate an LP tank. Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 9
Rev 2.13
Soleic™ Cabinet Specifications Bi­Level / Bar Height Cabinets Most base cabinet styles are available as “bi‐level” or bar‐height styles. A bi‐level cabinet is identical to a standard base cabinet with the addition of a raised section in the back. This allows you to add a raised bar countertop to your cabinetry without requiring a retaining wall. As bi‐level cabinets are meant to have their backs exposed, all bi‐level cabinets come standard with a decorative back panel. (When ordering bi‐level cabinets, be sure to include a cabinet layout. Soleic™ will build the back panel as 1 piece up to 8’ long to eliminate seams when possible. Bi‐Level Base Cabinets Bi‐Level Sink Base Cabinets with False Drawer Face Bi‐Level Drawer Base Cabinets Bi‐Level Side Burner Cabinets BLB‐21
BLB‐24 BLB‐27 BLB‐30 BLSB‐36
BLSB‐39 BLSB‐42 BLSB‐45 BLSB‐48 BLSB‐51 BLSB‐54 BLSB‐57 BLSide‐15 BLSide‐18 BLSide‐21
BLSide‐24 BLB‐9‐D BLB‐12‐D BLB‐15‐D BLB‐18‐D BLSBFH‐9 BLSBFH‐12 BLSBFH‐15 BLSBFH‐18 BLSBFH‐21 BLSBFH‐24 BLSBFH‐27 BLSBFH‐30 BLSBFH‐33 BLDG‐27 BLDG‐30 BLDG‐33 BLDG‐36 BLDG‐39 BLDG‐42 BLBBC‐42 Bi‐Level Pull Out Tray Cabinets with Drawer BLPOS‐15‐D BLPOS‐18‐D BLPOS‐21‐D
BLPOS‐24‐D Bi‐Level Trash Storage with Drawer Bi‐Level LP Tank Storage with Drawer BLTC‐15‐D BLTC‐18‐D BLLPC‐18‐D Bi‐Level Base Cabinets with Drawer Bi‐Level Sink Base Cabinets with Full Height Door Bi‐Level Grill Base Cabinets Cabinet depth is 32” Bi‐Level Blind Base Cabinets BLB‐21‐D
BLB‐24‐D BLB‐27‐D BLB‐30‐D BLSBFH‐36
BLSBFH‐39 BLSBFH‐42 BLSBFH‐45 BLSBFH‐48 BLSBFH‐51 BLSBFH‐54 BLSBFH‐57 BLDG‐45
BLDG‐48 BLDG‐51 BLDG‐54 BLDG‐57 Cabinet depth is 32” Bi‐Level Pull Out Tray Cabinets BLPOS‐15 BLPOS‐18 Bi‐Level Trash Storage Bi‐Level LP Tank Storage Bi‐Level Open Base Cabinets Cabinet depth is 28” BLTC‐15 BLTC‐18 BLB‐9 BLB‐12 BLB‐15 BLB‐18 BLSB‐9 BLSB‐12 BLSB‐15 BLSB‐18 BLSB‐21 BLSB‐24 BLSB‐27 BLSB‐30 BLSB‐33 BLDB‐12‐3 BLDB‐15‐3 BLDB‐18‐3 BLDB‐21‐3 BLDB‐24‐4 Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ BLPOS‐21
BLPOS‐24 BLLPC‐18 BLOBC‐9 BLOBC‐12 BLOBC‐15 BLOBC‐18 BLOBC‐21
BLOBC‐24 BLOBC‐27 BLOBC‐30 Page 10
Rev 2.13
Soleic™ Cabinet Specifications Fillers Base Fillers Base Corner Fillers Small SBF‐.25 SBF‐.50 SBF‐.75 CF#‐#
#= 1” to 6” in one inch increments Ex. CF2‐3 is a 2” x 3” filler Small
SBF‐1 SBF‐1.5 SBF‐2 Medium
MBF‐3 Large LBF‐6 LBF‐9 “Right” Model Shown Base fillers can be ordered in 31” height, ranging in width from .25” to 9”. Fillers 3" wide or larger can be upgraded to fluted fillers. Fillers can be ordered in Left and Right versions. Corner fillers are used to create a “dead” corner between two base cabinets meeting at a 90‐degree angle. Wall Fillers Filler width
Filler Height “Right” Model Shown .25”
.5”
.75”
1”
1.5”
2” 3” 6”
9”
12” WF-.25-12
WF-.5-12
WF-.75-12 WF-1-12 WF-1.5-12 WF-2-12 WF-3-12 WF-6-12 WF-9-12
15” WF-.25-15
WF-.5-15
WF-.75-15 WF-1-15 WF-1.5-15 WF-2-15 WF-3-15 WF-6-15 WF-9-15
18” WF-.25-18
WF-.5-18
WF-.75-18 WF-1-18 WF-1.5-18 WF-2-18 WF-3-18 WF-6-18 WF-9-18
21” WF-.25-21
WF-.5-21
WF-.75-21 WF-1-21 WF-1.5-21 WF-2-21 WF-3-21 WF-6-21 WF-9-21
24” WF-.25-24
WF-.5-24
WF-.75-24 WF-1-24 WF-1.5-24 WF-2-24 WF-3-24 WF-6-24 WF-9-24
30” WF-.25-30
WF-.5-30
WF-.75-30 WF-1-30 WF-1.5-30 WF-2-30 WF-3-30 WF-6-30 WF-9-30
36” WF-.25-36
WF-.5-36
WF-.75-36 WF-1-36 WF-1.5-36 WF-2-36 WF-3-36 WF-6-36 WF-9-36
42” WF-.25-42
WF-.5-42
WF-.75-42 WF-1-42 WF-1.5-42 WF-2-42 WF-3-42 WF-6-42 WF-9-42
Wall fillers can be ordered in 12” to 42” height, ranging in width from .25” to 9”. Fillers 3" wide or larger can be upgraded to fluted fillers.
Fillers can be ordered in Left and Right versions. The orientation of the filler is determined by the side of the cabinet that the filler attaches to when facing the front of the cabinet. Angle Corner Fillers Refrigerator Fillers ACF‐#x#
#= 1.5” to 6” in one inch increments RF‐2 RF‐2.25 RF‐2.5 RF‐2.75 RF‐3 RF‐3.25 RF‐3.5 RF‐3.75 “Left” Model Shown
Angle corner fillers are used to join two cabinets at angles up to 45 degrees. The face pieces can be ordered between 1.5” and 6”. Caution: Angle corner fillers are not warranted against breakage caused by bending fillers beyond 45‐degrees. RF‐4
RF‐4.25 RF‐4.5 RF‐4.75 RF‐5 RF‐5.25 RF‐5.5 RF‐5.75 RF‐6 Refrigerator fillers attach to base cabinets and provide a return on the side facing the refrigerator to help conceal gaps created by the appliance.
Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 11
Rev 2.13
Soleic™ Cabinet Specifications Finishing Panels Finished End Panel Bi‐Level Finished End Panel FEP
BLFEP
Decorative finished end panels are used to dress‐up the end of a cabinet to match the doors. They can be ordered to match any door style. End panels are ¾” thick. Decorative bi‐level finished end panels are used to dress‐up the end of a bi‐level cabinet to match the doors. They can be ordered to match any door style. End panels are ¾” thick.
Decorative Back Panels Bi‐Level Decorative Back Panels DBP‐
# #= Panel width Decorative back panels are used to create an even back when the backs of cabinets will be exposed. The panels are 3/4” thick, and are cut 1/4” deep to receive the backs of all cabinets. Please provide a cabinet layout when ordering decorative panels so the panel can be custom cut to exactly fit your cabinet run for a perfect “puzzle” fit. Panels can be ordered up to 96” without seams. BLDBP‐#
#= Panel width Bi‐Level decorative back panels are exactly the same as normal decorative back panels, but are taller to match the height of bi‐level cabinets.
Tall Decorative Back Panels Refrigerator End Panel TDBP‐#
#= Panel width “Left” Model Shown Tall decorative back panels can be ordered shorter than 48 inches without an additional charge. Any other back panel can also be ordered shorter in height without charge. REP‐2.5
REP‐2.75 REP‐3 REP‐3.25 REP‐3.5 REP‐3.75 REP‐4 REP‐4.25 REP‐4.5 REP‐4.75 REP‐5 REP‐5.25 REP‐5.5 REP‐5.75 REP‐6 Refrigerator end panels create a finished end when placing an appliance at the end of a cabinet run. Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 12
Rev 2.13
Soleic™ Cabinet Specifications Finishing Panels (continued) Bi‐Level Refrigerator End Panel BLREP‐2.5
BLREP‐2.75 BLREP‐3 BLREP‐3.25 BLREP‐3.5 BLREP‐3.75 BLREP‐4 BLREP‐4.25 BLREP‐4.5 BLREP‐4.75 BLREP‐5 BLREP‐5.25 BLREP‐5.5 BLREP‐5.75 BLREP‐6 “Left” Model Shown Dead Corner Return Panel DCRP
“Left” Model Shown Dead corner return panels are attached to angle fillers or corner fillers to cover dead corners. The back of the panel attaches to the wall on the side of the dead corner. Bi‐Level refrigerator end panels create a finished end when placing an appliance at the end of a run of bi‐level cabinets.
Finished Return Panels Bi‐Level Top Assembly FRP‐3
FRP‐3.25 FRP‐3.5 FRP‐3.75 FRP‐4 FRP‐4.25 FRP‐4.5 FRP‐4.75 FRP‐5 FRP‐5.25 FRP‐5.5 FRP‐5.75 FRP‐6 BLTA‐#
#= Panel width Finished return panels are used when covering needs to be created and the entire side needs to be covered on both sides. They feature a removable panel that allows installation from the interior prior to countertop installation. Bi‐Level top assemblies are used when a raised bar section is required behind an appliance such as a refrigerator. This allows you to connect adjoining bi‐level cabinets when a void is required to make room for an appliance. Bi‐Level top assemblies come with a finished back. Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 13
Rev 2.13
Soleic™ Cabinet Specifications Finishing Pieces Toe Kick Light Valance LV‐4 TK‐4 TK‐8 Toe kick panels are available in 4’ or 8’ lengths. They are 3/4” thick and 5” tall. Panels attach to the cabinet’s adjustable legs with provided clips. Toe kick panels can be easily trimmed with ordinary saws to achieve a perfect fit. Clips do not have to be placed on every leg to securely attach panel. 4’ pieces come with four clips. 8’ pieces come with five clips. Light valances pieces are available in four foot pieces that can be cut to a desired length. The pieces are mounted to the underside of upper cabinets to create a light valance when adding under‐cabinet lighting.
Baseboard Valance Extra Shelves BV‐4 BV‐8 ADD‐S‐12
ADD‐S‐15
ADD‐S‐18
ADD‐S‐21
ADD‐S‐24
ADD‐S‐27
ADD‐S‐30 Baseboard valance is 8” tall and is sold in 4 foot and 8 foot lengths.
Extra shelves are available for base cabinets between 12” and 30” wide. All extra shelves are 21” deep. Shelf pins are included. Shelf widths are 1 ½” smaller than cabinet outside dimension. Deluxe Corbel Standard Corbel CORB‐D
CORB‐S
Corbels can be used in conjunction with Bi‐Level cabinets, or anywhere you would like to extend a countertop.
Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 14
Rev 2.13
Soleic™ Cabinet Specifications Finishing Pieces (continued) Tray Kits Bottle Tray Kit TRAY‐12 TRAY‐15 TRAY‐18 TRAY‐21 TRAY‐24 TRAY‐27 BTRAY‐18
BTRAY‐24 Tray kits can be added to base cabinets. They feature stainless steel full extension drawer glides. Bottle tray kits have a taller pull‐out tray with dividers. They feature stainless steel full extension drawer glides. Crown Molding Extra Legs CM‐4
CM‐8 Crown molding is sold in 4 foot or 8 foot pieces. It is mounted to the top of wall cabinets from either the top of the cabinet, or screwed from the inside of the cabinet. The top section can be mounted forward to achieve a different profile look. LEG Legs are adjustable from 3 ¾” to 4 ¾” tall. Legs bases mount to the bottom of cabinets with four screws. Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 15
Rev 2.13
Soleiic™ Caabinet SSpeciffication
ns Door Styles BAHAMA CARIBBEAN COVE DOUBLE COVVE RAISED A
PANEL
FLAAT PANEL SHAKER FRENCH
Door features cclear D
acrylic pane
el Soleic™ Cabin
net Specifications Copyright© 2
2008 Soleic™ Page 16
Rev 2.13
Soleic™ Cabinet Specifications Colors WHITE SEAFOAM EVERGLADE MOCHA BLACK ASH PEWTER CHOCOLATE SAND Soleic™ Cabinet Specifications Copyright© 2008 Soleic™ Page 17
Rev 2.13