coolant flow diagram to sunnen® sv

M-SV-497A
GENERAL INFORMATION & SPECIFICATIONS
COOLANT FLOW DIAGRAM
TO
®
SUNNEN SV-490 VERTICAL HONING MACHINE
SUNNEN® VERTICAL HONING MACHINES - Models SV-490
Diameter Range (ID)1:
Maximum Workpiece Weigth1:
Maximum Workpiece Length1:
Work Area Envelope (Table):
Reciprocation (Stroke) Travel (Z-Axis):
Reciprocation (Stroke) Speed (Z-Axis):
Column Motor:
Spindle Speeds:
Spindle Motor:
Thrust:
Feed - Rotary:
Sump Pump2:
Sump Pump Motor2:
Sump Pump Rate2:
Coolant System:
Coolant Requirements:
Control System:
Work Area (View A)3:
Floor Space (Machine Foot Print):
Floor Space (Machine Foot Print):
19 - 200 mm (0.75 - 8.0 in.)
900 kg (2000 lbs.)
1219 mm (48 in)
1016 x 1778 mm (40 x 70 in.)
Up to 2285 mm (90 in.)
1-130 spm; length dependent
7,5 kW (10 hp); DC Servo
5 to 500 rpm
7,5 kW (10 hp)
1360 kg (3000 lbs.) maximum
Up to 25,4 N·m (224.8 lbf-in.) maximum torque
Centrifugal Pump
0,5 kW (.67 hp)
225 LPM @ 2 m head (68 GPM @ 6 ft head)
Optional
Sunnen Industrial Honing Fluids
Inductrial PC w/Windows®
4047 W x 4824 D x 5588 H mm (159 x 190 x 220 in.)
2523 W x 2563 D x 4666 H mm (99 x 101 x 184 in.) w/o Opt. Coolant System
2523 W x 3763 D x 466 H mm (99 x 148 x 184 in.)
OPTIONAL
COOLANT
SYSTEM with
PAPER FILTER
SUMP PUMP
OPTIONAL COOLANT SYSTEM with MAGNETIC SEPARATOR & FILTER
FLOW CONTROL
ON/OFF VALVE
WORKPIECE
SUMP PUMP
Doors Open & Column at Top of Travel
Floor Weight (Dry):
(with Standard Fixture):
Floor Load:
Pneumatic Requirements:
Electrical Requirements:
Color:
Noise Emission:
6294 kg (14000 lbs.) plus Fixturing
6429 kg (14300 lbs.)
2050 kg/sq. meter (415 lbs./sq. ft)
5,5 to 6,9 Bar (80 to 100 psi) for Accessories Only
460V, 60Hz, 3Ph, 44A; 400V, 50Hz, 3Ph; 46A (CE Approved)
Black / Stainless Steel
Less than 72 dB(A) continuous
Less than 78 dB(A) peak
Load (max. noise) condition in a typical factory environment.
Diameter range, length range, and workpiece weight are contingent on workpiece and application.
2 The SV490 does NOT come with Coolant or Pneumatic Systems. These Systems are optional and MUST be order separately.
3 Work Area includes Machine Floor Space plus clearance for operator to move around machine
1
PUMP
MACHINE
RESERVOIR
PAPER
FILTER
OPTIONAL
COOLANT SYSTEM
with PAPER FILTER
CLEANED
FLUID
MAGNETIC
SEPARATOR
“SUNNEN® AND THE SUNNEN LOGO ARE REGISTERED TRADEMARKS OF SUNNEN PRODUCTS COMPANY.”
Sunnen® reserves the right to change or
revise specifications and product design
in connection with any feature of our products contained herein. Such changes do
not entitle the buyer to corresponding
changes, improvements, additions, or replacements for equipment, supplies or accessories previously sold. Information
contained herein is considered to be accurate based on available information at
the time of printing. Should any
discrepancy of information arise, Sunnen
recommends that user verify discrepancy
with Sunnen before proceeding.
PRINTED IN U.S.A.
1203
SUNNEN PRODUCTS COMPANY
7910 Manchester Road, St. Louis, MO 63143 U.S.A.
Phone: 314-781-2100 Fax: 314-781-2268
U.S.A. Toll-Free Sales and Service:1-800-325-3670
International Division Fax: 314-781-6128
http://www.sunnen.com
e-mail: [email protected]
SWITZERLAND – SUNNEN AG
Phone: ++ 41 71 649 33 33
Fax: ++ 41 71 649 34 34
www.sunnen.ch
e-mail: [email protected]
ITALY - SUNNEN ITALIA S.R.L.
Phone: 39 02 383 417 1
Fax: 39 02 383 417 50
www.sunnenitalia.com
e-mail: [email protected]
FRANCE – SUNNEN SAS
Phone: +33 01 69 30 0000
Fax: +33 01 69 30 1111
www.sunnen.fr
e-mail: [email protected]
BELGIUM – SUNNEN BENELUX BVBA
Phone: +32 38 80 28 00
Fax: +32 38 44 39 01
www.sunnen.be
e-mail: [email protected]
UK – SUNNEN PRODUCTS LTD.
Phone: ++ 44 1442 39 39 39
Fax: ++ 44 1442 39 12 12
www.sunnen.co.uk
e-mail: [email protected]
POLAND – SUNNEN POLSKA SP. Z O.O.
Phone: +48 22 814 34 29
Fax: +48 22 814 34 28
www.sunnen.pl
e-mail: [email protected]
RUSSIA – SUNNEN RUS
Phone: +7 495 258 43 43
Fax: +7 495 258 91 75
www.sunnen.ru
e-mail: [email protected]
CZECH REPUBLIC – SUNNEN S.R.O.
Phone: +420 383 376 317
Fax: +420 383 376 316
www.sunnen.cz
e-mail: [email protected]
CHINA – SHANGHAI SUNNEN MECHANICAL CO., LTD.
Phone: 86 21 5813 3322
Fax: 86 21 5813 2299
www.sunnensh.com
e-mail: [email protected]
©COPYRIGHT SUNNEN® PRODUCTS COMPANY 2012, ALL RIGHTS RESERVED
OPTIONAL
COOLANT SYSTEM
with MAGNETIC
SEPARATOR
OPTIONAL
COOLANT SYSTEM
with FILTER
SUNNEN ® PRODUCTS COMPANY • 7910 MANCHESTER ROAD • ST. LOUIS, MO 63143, U.S.A. • PHONE: 314-781-2100
L-2
L-1
L-1
2563 mm (101 In.)
3763 mm (148 In.) WITH
ELEC DOOR OPEN
L-2
2335 mm
(92 in. / 7.7 ft.)
SHIPPING
ENVELOPE
4065 mm
(160 in.)
1911 mm
(75 in.)
1174
CLEARANCE TO
SUNNEN ST. LOUIS
TESTING FRAME
3761 mm
(148 in.)
3217 mm
(127 in. / 10.6 ft.)
AT FULL STROKE
MACHINE HEIGHT
5206 mm (205 in.)
4666 mm
(184 in.)
4441 mm
(175 in.)
4441 mm
(175 in.)
2523 mm
(99 In.)
1467 mm (58 in.)
BOTTOM STROKE
SPINDLE JOINT
1737 mm
(68 in.)
278 mm
(11 In.)
487 mm
(6 in.)
1510 mm
(59 in.)
2563 mm
(101 in.
930 mm
(37 in.)
970 mm
(38 in.)
SECTION L-1 / L-1
SPINDLE DOWN
563 mm
(22 in.)
2953 mm
(116 in.)
95 mm
(4 in.)
SECTION L-2 / L-2
SPINDLE DOWN
460 mm (18 In.)
MACHINE THROAT
563 mm
(22 in.)
SECTION L-2 / L-2
SPINDLE UP
L-2
L-1
L-1
2563 mm (101 In.)
3763 mm (148 In.) WITH
ELEC DOOR OPEN
L-2
2335 mm
(92 in. / 7.7 ft.)
SHIPPING
ENVELOPE
4065 mm
(160 in.)
1911 mm
(75 in.)
1174
CLEARANCE TO
SUNNEN ST. LOUIS
TESTING FRAME
3761 mm
(148 in.)
3217 mm
(127 in. / 10.6 ft.)
AT FULL STROKE
MACHINE HEIGHT
5206 mm (205 in.)
4666 mm
(184 in.)
4441 mm
(175 in.)
4441 mm
(175 in.)
2523 mm
(99 In.)
1467 mm (58 in.)
BOTTOM STROKE
SPINDLE JOINT
1737 mm
(68 in.)
278 mm
(11 In.)
487 mm
(6 in.)
1510 mm
(59 in.)
2563 mm
(101 in.
930 mm
(37 in.)
970 mm
(38 in.)
SECTION L-1 / L-1
SPINDLE DOWN
563 mm
(22 in.)
2953 mm
(116 in.)
95 mm
(4 in.)
SECTION L-2 / L-2
SPINDLE DOWN
460 mm (18 In.)
MACHINE THROAT
563 mm
(22 in.)
SECTION L-2 / L-2
SPINDLE UP
M-SV-497A
GENERAL INFORMATION & SPECIFICATIONS
COOLANT FLOW DIAGRAM
TO
®
SUNNEN SV-490 VERTICAL HONING MACHINE
SUNNEN® VERTICAL HONING MACHINES - Models SV-490
Diameter Range (ID)1:
Maximum Workpiece Weigth1:
Maximum Workpiece Length1:
Work Area Envelope (Table):
Reciprocation (Stroke) Travel (Z-Axis):
Reciprocation (Stroke) Speed (Z-Axis):
Column Motor:
Spindle Speeds:
Spindle Motor:
Thrust:
Feed - Rotary:
Sump Pump2:
Sump Pump Motor2:
Sump Pump Rate2:
Coolant System:
Coolant Requirements:
Control System:
Work Area (View A)3:
Floor Space (Machine Foot Print):
Floor Space (Machine Foot Print):
19 - 200 mm (0.75 - 8.0 in.)
900 kg (2000 lbs.)
1219 mm (48 in)
1016 x 1778 mm (40 x 70 in.)
Up to 2285 mm (90 in.)
1-130 spm; length dependent
7,5 kW (10 hp); DC Servo
5 to 500 rpm
7,5 kW (10 hp)
1360 kg (3000 lbs.) maximum
Up to 25,4 N·m (224.8 lbf-in.) maximum torque
Centrifugal Pump
0,5 kW (.67 hp)
225 LPM @ 2 m head (68 GPM @ 6 ft head)
Optional
Sunnen Industrial Honing Fluids
Inductrial PC w/Windows®
4047 W x 4824 D x 5588 H mm (159 x 190 x 220 in.)
2523 W x 2563 D x 4666 H mm (99 x 101 x 184 in.) w/o Opt. Coolant System
2523 W x 3763 D x 466 H mm (99 x 148 x 184 in.)
OPTIONAL
COOLANT
SYSTEM with
PAPER FILTER
SUMP PUMP
OPTIONAL COOLANT SYSTEM with MAGNETIC SEPARATOR & FILTER
FLOW CONTROL
ON/OFF VALVE
WORKPIECE
SUMP PUMP
Doors Open & Column at Top of Travel
Floor Weight (Dry):
(with Standard Fixture):
Floor Load:
Pneumatic Requirements:
Electrical Requirements:
Color:
Noise Emission:
6294 kg (14000 lbs.) plus Fixturing
6429 kg (14300 lbs.)
2050 kg/sq. meter (415 lbs./sq. ft)
5,5 to 6,9 Bar (80 to 100 psi) for Accessories Only
460V, 60Hz, 3Ph, 44A; 400V, 50Hz, 3Ph; 46A (CE Approved)
Black / Stainless Steel
Less than 72 dB(A) continuous
Less than 78 dB(A) peak
Load (max. noise) condition in a typical factory environment.
Diameter range, length range, and workpiece weight are contingent on workpiece and application.
2 The SV490 does NOT come with Coolant or Pneumatic Systems. These Systems are optional and MUST be order separately.
3 Work Area includes Machine Floor Space plus clearance for operator to move around machine
1
PUMP
MACHINE
RESERVOIR
PAPER
FILTER
OPTIONAL
COOLANT SYSTEM
with PAPER FILTER
CLEANED
FLUID
MAGNETIC
SEPARATOR
“SUNNEN® AND THE SUNNEN LOGO ARE REGISTERED TRADEMARKS OF SUNNEN PRODUCTS COMPANY.”
Sunnen® reserves the right to change or
revise specifications and product design
in connection with any feature of our products contained herein. Such changes do
not entitle the buyer to corresponding
changes, improvements, additions, or replacements for equipment, supplies or accessories previously sold. Information
contained herein is considered to be accurate based on available information at
the time of printing. Should any
discrepancy of information arise, Sunnen
recommends that user verify discrepancy
with Sunnen before proceeding.
PRINTED IN U.S.A.
1203
SUNNEN PRODUCTS COMPANY
7910 Manchester Road, St. Louis, MO 63143 U.S.A.
Phone: 314-781-2100 Fax: 314-781-2268
U.S.A. Toll-Free Sales and Service:1-800-325-3670
International Division Fax: 314-781-6128
http://www.sunnen.com
e-mail: [email protected]
SWITZERLAND – SUNNEN AG
Phone: ++ 41 71 649 33 33
Fax: ++ 41 71 649 34 34
www.sunnen.ch
e-mail: [email protected]
ITALY - SUNNEN ITALIA S.R.L.
Phone: 39 02 383 417 1
Fax: 39 02 383 417 50
www.sunnenitalia.com
e-mail: [email protected]
FRANCE – SUNNEN SAS
Phone: +33 01 69 30 0000
Fax: +33 01 69 30 1111
www.sunnen.fr
e-mail: [email protected]
BELGIUM – SUNNEN BENELUX BVBA
Phone: +32 38 80 28 00
Fax: +32 38 44 39 01
www.sunnen.be
e-mail: [email protected]
UK – SUNNEN PRODUCTS LTD.
Phone: ++ 44 1442 39 39 39
Fax: ++ 44 1442 39 12 12
www.sunnen.co.uk
e-mail: [email protected]
POLAND – SUNNEN POLSKA SP. Z O.O.
Phone: +48 22 814 34 29
Fax: +48 22 814 34 28
www.sunnen.pl
e-mail: [email protected]
RUSSIA – SUNNEN RUS
Phone: +7 495 258 43 43
Fax: +7 495 258 91 75
www.sunnen.ru
e-mail: [email protected]
CZECH REPUBLIC – SUNNEN S.R.O.
Phone: +420 383 376 317
Fax: +420 383 376 316
www.sunnen.cz
e-mail: [email protected]
CHINA – SHANGHAI SUNNEN MECHANICAL CO., LTD.
Phone: 86 21 5813 3322
Fax: 86 21 5813 2299
www.sunnensh.com
e-mail: [email protected]
©COPYRIGHT SUNNEN® PRODUCTS COMPANY 2012, ALL RIGHTS RESERVED
OPTIONAL
COOLANT SYSTEM
with MAGNETIC
SEPARATOR
OPTIONAL
COOLANT SYSTEM
with FILTER
SUNNEN ® PRODUCTS COMPANY • 7910 MANCHESTER ROAD • ST. LOUIS, MO 63143, U.S.A. • PHONE: 314-781-2100