SPECIFICATIONS and FLOOR PLAN LAYOUT for SUNNEN

Transcription

SPECIFICATIONS and FLOOR PLAN LAYOUT for SUNNEN
M-SV-561
GENERAL INFORMATION & SPECIFICATIONS
SUNNEN CNC VERTICAL HONING MACHINES - SV2560 Series
SPECIFICATIONS and FLOOR PLAN LAYOUT
for
®
SUNNEN SV2560 CNC VERTICAL HONING MACHINES
®
19 - 250 mm (0.76 - 10 in.) Depending on Tooling
700 cc/hr (45 ci/hr)
900 kg (2000 lbs.)
1219 mm (48 in)
1016 x 1778 mm (40 x 70 in)
Up to 1475 mm (58 in.)
10-160 spm; length dependent
7,5 kW (10 hp); DC Servo
300 rpm
15 kW (20 hp) @ 300rpm
1360 kg (3000 lbs.) maximum
Up to 8941 newtons (2000 lbs.) force
Centrifugal Pump
0,5 kW (.67 hp)
225 LPM @ 2 m (68 GPM @ 6 feet)
Optional
Sunnen Industrial Honing Fluids
Inductrial PC w/Windows
4124 W x 4874 D x 5200 H mm (162 x 192 x 205 in.)
2600 W x 2613 D x 5090 H mm (102 x 103 x 200 in.) w/o Opt. Coolant System
2600 W x 4244 D x 5090 H mm (102 x 167 x 200 in.) w/o Opt. Coolant System
4244 mm
(167 in.)
610 mm
(24 in.)
®
431 mm
(17 in.)
WORK AREA
VIEW A
5620 kg (12500 lbs.) plus Fixturing
2050 kg/sq. meter (415 lbs./sq. ft)
460V, 60Hz, 3Ph; 400V, 50Hz, 3Ph (for accessories only)
5,5 to 6,9 Bar (80 to 100 psi)
Black / Stainless Steel
Less than 72 dB(A) continuous; Less than 78 dB(A) peak
Load (max. noise) condition in a typical factory environment.
Coolant Tank w/Magnetic Separator, Paperbed Filtration, Custom Guarding,
T-Slot Table, Rotary Index Table 2-32 position, Linear Shuttle Table,
Air Gage Intergrated Hone Head & Post-Process Gaging w/Feedback
R
SV-560
R
R
SV-560
SV-560
Diameter range, length range, and workpiece weight are contingent on workpiece and application.
2 The SV2560 does NOT come with Coolant or Pneumatic Systems. These Systems are optional and MUST be order separately.
3 Work Area includes Machine Floor Space plus clearance for operator to move around machine.
1
610 mm
(24 in.)
5090 mm
(200 in.)
TOP VIEW
3811 mm
(150 in.)
Optional Equipment:
914 mm
(36 in.)
469 mm
(18 in.)
Doors Open & Column at Top of Travel
Floor Weight (Dry):
Floor Load:
Electrical Requirements:
Pneumatic Requirements:
Color:
Noise Emission:
1651 mm
(65 in.)
1200 mm
(47 in.)
Diameter Range (ID)1:
Stock Removal:
Workpiece Weight1:
Maximum Workpiece Length1:
Workpiece Envelope:
Stroke Travel (Z Axis):
Stroke Speed (Z Axis):
Stroke (Column) Motor:
Spindle Speeds:
Spindle Motor:
Thrust:
Feed - Linear:
Sump Pump2:
Sump Pump Motor2:
Sump Pump Rate2:
Coolant System2:
Coolant Requirements:
Control System:
Work Area (View A)3:
Floor Space (Machine Foot Print):
Floor Space (Machine Foot Print):
http://www.sunnen.com
R
R
SV-560
R
Sunnen® reserves the right to change or
revise specifications and product design
in connection with any feature of our products contained herein. Such changes do
not entitle the buyer to corresponding
changes, improvements, additions, or replacements for equipment, supplies or accessories previously sold. Information
contained herein is considered to be accurate based on available information at
the time of printing. Should any
discrepancy of information arise, Sunnen
recommends that user verify discrepancy
with Sunnen before proceeding.
PRINTED IN U.S.A.
1311
SUNNEN PRODUCTS COMPANY
7910 Manchester Road, St. Louis, MO 63143 U.S.A.
Phone: 314-781-2100 Fax: 314-781-2268
U.S.A. Toll-Free Sales and Service:1-800-325-3670
International Division Fax: 314-781-6128
http://www.sunnen.com
e-mail: [email protected]
©COPYRIGHT SUNNEN® PRODUCTS COMPANY 2013, ALL RIGHTS RESERVED
SV-560
R
R
R
R
BRAZIL – SUNNEN DO BRASIL
Phone: +32 38 80 28 00
Fax: +32 38 44 39 01
www.sunnen.be
e-mail: [email protected]
BELGIUM – SUNNEN BENELUX BVBA
Phone: +32 38 80 28 00
Fax: +32 38 44 39 01
www.sunnen.be
e-mail: [email protected]
CHINA – SHANGHAI SUNNEN MECHANICAL CO., LTD.
Phone: 86 21 5813 3322
Fax: 86 21 5813 2299
www.sunnensh.com
e-mail: [email protected]
CZECH REPUBLIC – SUNNEN S.R.O.
Phone: +420 383 376 317
Fax: +420 383 376 316
www.sunnen.cz
e-mail: [email protected]
FRANCE – SUNNEN SAS
Phone: +33 01 69 30 0000
Fax: +33 01 69 30 1111
www.sunnen.fr
e-mail: [email protected]
ITALY - SUNNEN ITALIA S.R.L.
Phone: 39 02 383 417 1
Fax: 39 02 383 417 50
www.sunnenitalia.com
e-mail: [email protected]
POLAND – SUNNEN POLSKA SP. Z O.O.
Phone: +48 22 814 34 29
Fax: +48 22 814 34 28
www.sunnen.pl
e-mail: [email protected]
RUSSIA – SUNNEN RUS
Phone: +7 495 258 43 43
Fax: +7 495 258 91 75
www.sunnen.ru
e-mail: [email protected]
SWITZERLAND – SUNNEN AG
Phone: ++ 41 71 649 33 33
Fax: ++ 41 71 649 34 34
www.sunnen.ch
e-mail: [email protected]
UK – SUNNEN PRODUCTS LTD.
Phone: ++ 44 1442 39 39 39
Fax: ++ 44 1442 39 12 12
www.sunnen.co.uk
e-mail: [email protected]
SV-560
SV-560
SV-560
Z
SV-560
SV-560
1900 mm
(75 in.)
R
“SUNNEN® AND THE SUNNEN LOGO ARE REGISTERED TRADEMARKS OF SUNNEN PRODUCTS COMPANY.”
R
SV-560
2600 mm
(102 in.)
FRONT VIEW
SV-560
1510 mm
(59 in.)
2613 mm
(103 in.)
1997 mm
(79 in.)
SIDE VIEW
SUNNEN PRODUCTS COMPANY • 7910 MANCHESTER ROAD • ST. LOUIS, MO 63143, U.S.A. • PHONE: 314-781-2100
®
M-SV-561
GENERAL INFORMATION & SPECIFICATIONS
SUNNEN CNC VERTICAL HONING MACHINES - SV2560 Series
SPECIFICATIONS and FLOOR PLAN LAYOUT
for
®
SUNNEN SV2560 CNC VERTICAL HONING MACHINES
®
19 - 250 mm (0.76 - 10 in.) Depending on Tooling
700 cc/hr (45 ci/hr)
900 kg (2000 lbs.)
1219 mm (48 in)
1016 x 1778 mm (40 x 70 in)
Up to 1475 mm (58 in.)
10-160 spm; length dependent
7,5 kW (10 hp); DC Servo
300 rpm
15 kW (20 hp) @ 300rpm
1360 kg (3000 lbs.) maximum
Up to 8941 newtons (2000 lbs.) force
Centrifugal Pump
0,5 kW (.67 hp)
225 LPM @ 2 m (68 GPM @ 6 feet)
Optional
Sunnen Industrial Honing Fluids
Inductrial PC w/Windows
4124 W x 4874 D x 5200 H mm (162 x 192 x 205 in.)
2600 W x 2613 D x 5090 H mm (102 x 103 x 200 in.) w/o Opt. Coolant System
2600 W x 4244 D x 5090 H mm (102 x 167 x 200 in.) w/o Opt. Coolant System
4244 mm
(167 in.)
610 mm
(24 in.)
®
431 mm
(17 in.)
WORK AREA
VIEW A
5620 kg (12500 lbs.) plus Fixturing
2050 kg/sq. meter (415 lbs./sq. ft)
460V, 60Hz, 3Ph; 400V, 50Hz, 3Ph (for accessories only)
5,5 to 6,9 Bar (80 to 100 psi)
Black / Stainless Steel
Less than 72 dB(A) continuous; Less than 78 dB(A) peak
Load (max. noise) condition in a typical factory environment.
Coolant Tank w/Magnetic Separator, Paperbed Filtration, Custom Guarding,
T-Slot Table, Rotary Index Table 2-32 position, Linear Shuttle Table,
Air Gage Intergrated Hone Head & Post-Process Gaging w/Feedback
R
SV-560
R
R
SV-560
SV-560
Diameter range, length range, and workpiece weight are contingent on workpiece and application.
2 The SV2560 does NOT come with Coolant or Pneumatic Systems. These Systems are optional and MUST be order separately.
3 Work Area includes Machine Floor Space plus clearance for operator to move around machine.
1
610 mm
(24 in.)
5090 mm
(200 in.)
TOP VIEW
3811 mm
(150 in.)
Optional Equipment:
914 mm
(36 in.)
469 mm
(18 in.)
Doors Open & Column at Top of Travel
Floor Weight (Dry):
Floor Load:
Electrical Requirements:
Pneumatic Requirements:
Color:
Noise Emission:
1651 mm
(65 in.)
1200 mm
(47 in.)
Diameter Range (ID)1:
Stock Removal:
Workpiece Weight1:
Maximum Workpiece Length1:
Workpiece Envelope:
Stroke Travel (Z Axis):
Stroke Speed (Z Axis):
Stroke (Column) Motor:
Spindle Speeds:
Spindle Motor:
Thrust:
Feed - Linear:
Sump Pump2:
Sump Pump Motor2:
Sump Pump Rate2:
Coolant System2:
Coolant Requirements:
Control System:
Work Area (View A)3:
Floor Space (Machine Foot Print):
Floor Space (Machine Foot Print):
http://www.sunnen.com
R
R
SV-560
R
Sunnen® reserves the right to change or
revise specifications and product design
in connection with any feature of our products contained herein. Such changes do
not entitle the buyer to corresponding
changes, improvements, additions, or replacements for equipment, supplies or accessories previously sold. Information
contained herein is considered to be accurate based on available information at
the time of printing. Should any
discrepancy of information arise, Sunnen
recommends that user verify discrepancy
with Sunnen before proceeding.
PRINTED IN U.S.A.
1311
SUNNEN PRODUCTS COMPANY
7910 Manchester Road, St. Louis, MO 63143 U.S.A.
Phone: 314-781-2100 Fax: 314-781-2268
U.S.A. Toll-Free Sales and Service:1-800-325-3670
International Division Fax: 314-781-6128
http://www.sunnen.com
e-mail: [email protected]
©COPYRIGHT SUNNEN® PRODUCTS COMPANY 2013, ALL RIGHTS RESERVED
SV-560
R
R
R
R
BRAZIL – SUNNEN DO BRASIL
Phone: +32 38 80 28 00
Fax: +32 38 44 39 01
e-mail: [email protected]
www.sunnen.be
BELGIUM – SUNNEN BENELUX BVBA
Phone: +32 38 80 28 00
Fax: +32 38 44 39 01
e-mail: [email protected]
www.sunnen.be
CHINA – SHANGHAI SUNNEN MECHANICAL CO., LTD.
Phone: 86 21 5813 3322
Fax: 86 21 5813 2299
e-mail: [email protected]
www.sunnensh.com
CZECH REPUBLIC – SUNNEN S.R.O.
Phone: +420 383 376 317
Fax: +420 383 376 316
e-mail: [email protected]
www.sunnen.cz
FRANCE – SUNNEN SAS
Phone: +33 169 30 00 00
Fax: +33 169 30 11 11
e-mail: [email protected]
www.sunnen.fr
ITALY - SUNNEN ITALIA S.R.L.
Phone: 39 02 383 417 1
Fax: 39 02 383 417 50
e-mail: [email protected]
www.sunnenitalia.com
POLAND – SUNNEN POLSKA SP. Z O.O.
Phone: +48 22 814 34 29
Fax: +48 22 814 34 28
e-mail: [email protected]
www.sunnen.pl
RUSSIA – SUNNEN RUS
Phone: +7 495 258 43 43
Fax: +7 495 258 91 75
e-mail: [email protected]
www.sunnen.ru
SWITZERLAND – SUNNEN AG
Phone: ++ 41 71 649 33 33
Fax: ++ 41 71 649 34 34
e-mail: [email protected]
www.sunnen.ch
UK – SUNNEN PRODUCTS LTD.
Phone: ++ 44 1442 39 39 39
Fax: ++ 44 1442 39 12 12
e-mail: [email protected]
www.sunnen.co.uk
SV-560
SV-560
SV-560
Z
SV-560
SV-560
1900 mm
(75 in.)
R
“SUNNEN® AND THE SUNNEN LOGO ARE REGISTERED TRADEMARKS OF SUNNEN PRODUCTS COMPANY.”
R
SV-560
2600 mm
(102 in.)
FRONT VIEW
SV-560
1510 mm
(59 in.)
2613 mm
(103 in.)
1997 mm
(79 in.)
SIDE VIEW
SUNNEN PRODUCTS COMPANY • 7910 MANCHESTER ROAD • ST. LOUIS, MO 63143, U.S.A. • PHONE: 314-781-2100
®

Similar documents

coolant flow diagram to sunnen® sv

coolant flow diagram to sunnen® sv revise specifications and product design in connection with any feature of our products contained herein. Such changes do not entitle the buyer to corresponding changes, improvements, additions, or...

More information