Lista Workbenches
Transcription
Lista Workbenches
Lista Workbenches Lista workbench systems, like all Lista systems, feature a clean, aesthetically pleasing and extremely practical design. These are fully integrated modular systems for storage and work- Building your Ideal Workbench Lista’s wide array of accessory Using standard components, your workbench system can be completely customized, without the options, above and below the custom cost, to suit your current worksurface, allows for an almost and changing needs. infinite number of configurations. Rugged stationary and adjustable riser shelves provide above-worksurface storage for items that require easy, ready access. Instrument riser shelves can be equipped with electrical kits for easy access to power. The FlexWorks ® Accessory System provides for a wide variety of storage and work accessories above the worksurface. space. They are customizable to the last detail, but come without a custom cost. Workbenches can be configured in a variety of heights and lengths. Benches can be ordered at ergonomically correct standard work height, or at desk Our variety of workbench tops, from hard maple to plastic laminate to galvanized steel, are all easy to maintain, rugged and durable. or counter heights. This means that stored tools and parts are always within easy reach. Lista offers workbench components for industrial, assembly and Our variety of workbench legs and bases, from industrial to technical to Height-Right ® height-adjustable, are designed to meet your specific functional and aesthetic requirements. technical/laboratory settings, allowing the exact customization needed for each application. Our workbenches can be teamed with both Narrow Width (16 7⁄ 8" wide) and MP Width (22 3 ⁄ 16" wide) storage cabinets for use as pedestals. This provides complete organization of tools, components or instrumentation, right at the point of use. Our Narrow Width (left) and MP Width (right) cabinets give you a choice of pedestal options for your workbench system. 62 Partial- or full-height doors can be added to cabinet housings to provide bulk shelf storage with full security. The ability to add casters to legs and cabinets means that any Lista workbench can become a workstation on wheels. 63 Lista Workbenches Lista workbench systems, like all Lista systems, feature a clean, aesthetically pleasing and extremely practical design. These are fully integrated modular systems for storage and work- Building your Ideal Workbench Lista’s wide array of accessory Using standard components, your workbench system can be completely customized, without the options, above and below the custom cost, to suit your current worksurface, allows for an almost and changing needs. infinite number of configurations. Rugged stationary and adjustable riser shelves provide above-worksurface storage for items that require easy, ready access. Instrument riser shelves can be equipped with electrical kits for easy access to power. The FlexWorks ® Accessory System provides for a wide variety of storage and work accessories above the worksurface. space. They are customizable to the last detail, but come without a custom cost. Workbenches can be configured in a variety of heights and lengths. Benches can be ordered at ergonomically correct standard work height, or at desk Our variety of workbench tops, from hard maple to plastic laminate to galvanized steel, are all easy to maintain, rugged and durable. or counter heights. This means that stored tools and parts are always within easy reach. Lista offers workbench components for industrial, assembly and Our variety of workbench legs and bases, from industrial to technical to Height-Right ® height-adjustable, are designed to meet your specific functional and aesthetic requirements. technical/laboratory settings, allowing the exact customization needed for each application. Our workbenches can be teamed with both Narrow Width (16 7⁄ 8" wide) and MP Width (22 3 ⁄ 16" wide) storage cabinets for use as pedestals. This provides complete organization of tools, components or instrumentation, right at the point of use. Our Narrow Width (left) and MP Width (right) cabinets give you a choice of pedestal options for your workbench system. 62 Partial- or full-height doors can be added to cabinet housings to provide bulk shelf storage with full security. The ability to add casters to legs and cabinets means that any Lista workbench can become a workstation on wheels. 63 Lista Industrial Workbench Features Rugged. Durable. Built to handle the harshest work environments — Lista’s industrial workbenches feature flexible standard components and can be cost-effectively custom designed and built to meet the specific needs of your application. Feature: Wide choice of benchtop accessories Create task-specific configurations. Benefit: Greater productivity and efficiency Feature: Variety of worksurfaces All tops come in a variety of lengths and are durable and long-lasting. Benefit: Surface always appropriate to application Feature: Ergonomic handles When drawers are closed, handles are flush with housing so nothing protrudes. Drawer handles are located at top of drawer. Benefit: Improves safety, appearance and ergonomics Feature: Customizable drawer compartments A wide variety of drawer accessories for maximum partitioning flexibility. Benefit: Better organization, faster retrieval Feature: Choice of pedestal sizes and styles Different widths, leg heights, cabinets or legs, drawer cabinets or shelf/door cabinets. Benefit: Customized to your needs Feature: Heavy-duty welded leg One-piece leg with bottom hole for optional leveling glides. Benefit: Provides support for heavy-duty applications Feature: Mobility All cabinets and legs are easily updated for mobile uses. Benefit: Work areas can easily be reconfigured, components can be moved to and from the work site 64 65 Lista Industrial Workbench Features Rugged. Durable. Built to handle the harshest work environments — Lista’s industrial workbenches feature flexible standard components and can be cost-effectively custom designed and built to meet the specific needs of your application. Feature: Wide choice of benchtop accessories Create task-specific configurations. Benefit: Greater productivity and efficiency Feature: Variety of worksurfaces All tops come in a variety of lengths and are durable and long-lasting. Benefit: Surface always appropriate to application Feature: Ergonomic handles When drawers are closed, handles are flush with housing so nothing protrudes. Drawer handles are located at top of drawer. Benefit: Improves safety, appearance and ergonomics Feature: Customizable drawer compartments A wide variety of drawer accessories for maximum partitioning flexibility. Benefit: Better organization, faster retrieval Feature: Choice of pedestal sizes and styles Different widths, leg heights, cabinets or legs, drawer cabinets or shelf/door cabinets. Benefit: Customized to your needs Feature: Heavy-duty welded leg One-piece leg with bottom hole for optional leveling glides. Benefit: Provides support for heavy-duty applications Feature: Mobility All cabinets and legs are easily updated for mobile uses. Benefit: Work areas can easily be reconfigured, components can be moved to and from the work site 64 65 Lista Industrial Workbenches Make Any Workspace Work Lista’s rugged industrial workbench systems and the large variety of accessories can be configured to suit almost any application or Heavy-duty Lista industrial workbenches in combination with Lista stacked cabinets help to create an organized, efficient workspace that stands up to the challenges of this marine emergency response company. working environment. Four sets of four custom-designed workbenches make maximum use of the available space in this machine tool room at the Mercedes-Benz Training Center. Cliflex Bellows, a manufacturer of industrial control equipment, relies on Lista workbenches for heavy duty storage below the bench, as well as durable worksurfaces providing decades of use. In this automotive engineering shop used by the PacWest Racing Group, Lista workbenches and overhead cabinets help to keep the team of racing engineers operating at peak efficiency. 66 This corporate aircraft operator wanted to upgrade its maintenance facility to match the quality of its aircraft. They use several mobile “benches on wheels” in its hangar and support shop, including this mobile inspection station. Workbenches at Sun Chemical’s laboratories are used for the formulation and matching of printer’s inks. The benches provide an aesthetically pleasing work area with durable, easy-to-clean surfaces and organized storage. 67 Lista Industrial Workbenches Make Any Workspace Work Lista’s rugged industrial workbench systems and the large variety of accessories can be configured to suit almost any application or Heavy-duty Lista industrial workbenches in combination with Lista stacked cabinets help to create an organized, efficient workspace that stands up to the challenges of this marine emergency response company. working environment. Four sets of four custom-designed workbenches make maximum use of the available space in this machine tool room at the Mercedes-Benz Training Center. Cliflex Bellows, a manufacturer of industrial control equipment, relies on Lista workbenches for heavy duty storage below the bench, as well as durable worksurfaces providing decades of use. In this automotive engineering shop used by the PacWest Racing Group, Lista workbenches and overhead cabinets help to keep the team of racing engineers operating at peak efficiency. 66 This corporate aircraft operator wanted to upgrade its maintenance facility to match the quality of its aircraft. They use several mobile “benches on wheels” in its hangar and support shop, including this mobile inspection station. Workbenches at Sun Chemical’s laboratories are used for the formulation and matching of printer’s inks. The benches provide an aesthetically pleasing work area with durable, easy-to-clean surfaces and organized storage. 67 Lista Technical Workbench Features Featuring a sleek, aesthetically Our modular approach is the key to pleasing design, the real beauty of our technical benches’ versatility, Lista’s technical workbenches is with flexible standard components their ability to perfectly suit the and accessory options both above widest variety of applications. and below the worksurface. Feature: Wide choice of benchtop accessories Create task-specific configurations. Benefit: Greater productivity and efficiency D AVAIL A E BL ES Feature: Built-in electrical power supply Multiple outlets conveniently located on instrument riser. Benefit: Easy access to electricity Feature: Variety of worksurfaces, including ESD All tops come in a variety of lengths and are durable and long-lasting. Benefit: Surface always appropriate to application, ESD surface protects sensitive components Feature: Ergonomic handles When drawers are closed, handles are flush with housing so nothing protrudes. Drawer handles are located at top of drawer. Benefit: Improves safety, appearance and ergonomics Feature: ESD drawer accessories, grounding wire Static dissipative paint and plastic boxes protect sensitive drawer contents. Benefit: Safe storage and use of electronic items Feature: Customizable drawer compartments A wide variety of drawer accessories for maximum partitioning flexibility. Benefit: Better organization, faster retrieval Feature: Choice of pedestal sizes and styles Different widths, leg heights, cabinets or legs, drawer cabinets or shelf/door cabinets. Benefit: Customized to your needs Feature: Removable leg panel Allows for two-tone colors, hides stringer and bottom shelf hardware, provides access to electric cables. Benefit: Enhanced aesthetics, easy maintenance Feature: Easy-access leveling adjustments Removable end caps provide clean look and quick access to leveling adjustments. Benefit: Worksurface is always level Feature: Mobility All cabinets and legs are easily updated for mobile uses. Benefit: Work areas can easily be reconfigured, components can be moved to and from the work site 68 69 Lista Technical Workbench Features Featuring a sleek, aesthetically Our modular approach is the key to pleasing design, the real beauty of our technical benches’ versatility, Lista’s technical workbenches is with flexible standard components their ability to perfectly suit the and accessory options both above widest variety of applications. and below the worksurface. Feature: Wide choice of benchtop accessories Create task-specific configurations. Benefit: Greater productivity and efficiency D AVAIL A E BL ES Feature: Built-in electrical power supply Multiple outlets conveniently located on instrument riser. Benefit: Easy access to electricity Feature: Variety of worksurfaces, including ESD All tops come in a variety of lengths and are durable and long-lasting. Benefit: Surface always appropriate to application, ESD surface protects sensitive components Feature: Ergonomic handles When drawers are closed, handles are flush with housing so nothing protrudes. Drawer handles are located at top of drawer. Benefit: Improves safety, appearance and ergonomics Feature: ESD drawer accessories, grounding wire Static dissipative paint and plastic boxes protect sensitive drawer contents. Benefit: Safe storage and use of electronic items Feature: Customizable drawer compartments A wide variety of drawer accessories for maximum partitioning flexibility. Benefit: Better organization, faster retrieval Feature: Choice of pedestal sizes and styles Different widths, leg heights, cabinets or legs, drawer cabinets or shelf/door cabinets. Benefit: Customized to your needs Feature: Removable leg panel Allows for two-tone colors, hides stringer and bottom shelf hardware, provides access to electric cables. Benefit: Enhanced aesthetics, easy maintenance Feature: Easy-access leveling adjustments Removable end caps provide clean look and quick access to leveling adjustments. Benefit: Worksurface is always level Feature: Mobility All cabinets and legs are easily updated for mobile uses. Benefit: Work areas can easily be reconfigured, components can be moved to and from the work site 68 69 Lista Technical Workbenches Make Any Workspace Work No matter what you’re working At Columbia University’s Medical Research Laboratories, Lista workbench systems offer maximum drawer storage and organization. They allow researchers to keep all tools, supplies and testing equipment from cluttering the worksurface. The clean, high tech look of the systems is a perfect complement to the laboratory’s sleek interior design. on, Lista’s technical workbench systems have the variety, durability and flexibility to meet your needs. Productivity has improved at Hypertherm, a manufacturer of plasma cutting equipment, with the assistance of Lista workbenches equipped with the FlexWorks Accessory System. Hand, electric and pneumatic tools are stored directly at the workstations, and FlexWorks components are easily adjusted whenever necessary to suit specific tasks. Cummins Engine purchased 200 Lista workbenches featuring the FlexWorks ® Accessory System, largely because they could customize each workbench to suit the needs of each individual technician. The Lista system also provides Cummins with a variety of storage solutions below the worksurface. Telesis Marking Systems utilizes Lista workbenches throughout their assembly area, with specific benches designed for particular tasks. Lista’s cabinets with subdividable drawers are ideal for storing small items and tools such as fasteners and assembly parts. With Lista workbenches and overhead cabinets, Wishard Memorial Hospital was able to consolidate their Biomedical Engineering Department into a very organized and productive workspace, using dramatically less square footage than prior equipment. Lista’s modular cabinet drawers also simplify the inventory of supplies and components. The Sony Electronics facility needed a more flexible workbench system that would be strong enough for working with and storing heavy electronic equipment. Lista’s workbenches, featuring the FlexWorks® Accessory System, have proven an ideal solution, serving a variety of functions and offering the necessary weight-bearing capacity. Sony also chose Lista mobile cabinets, which are used for housing a range of parts and tools. 70 71 Lista Technical Workbenches Make Any Workspace Work No matter what you’re working At Columbia University’s Medical Research Laboratories, Lista workbench systems offer maximum drawer storage and organization. They allow researchers to keep all tools, supplies and testing equipment from cluttering the worksurface. The clean, high tech look of the systems is a perfect complement to the laboratory’s sleek interior design. on, Lista’s technical workbench systems have the variety, durability and flexibility to meet your needs. Productivity has improved at Hypertherm, a manufacturer of plasma cutting equipment, with the assistance of Lista workbenches equipped with the FlexWorks Accessory System. Hand, electric and pneumatic tools are stored directly at the workstations, and FlexWorks components are easily adjusted whenever necessary to suit specific tasks. Cummins Engine purchased 200 Lista workbenches featuring the FlexWorks ® Accessory System, largely because they could customize each workbench to suit the needs of each individual technician. The Lista system also provides Cummins with a variety of storage solutions below the worksurface. Telesis Marking Systems utilizes Lista workbenches throughout their assembly area, with specific benches designed for particular tasks. Lista’s cabinets with subdividable drawers are ideal for storing small items and tools such as fasteners and assembly parts. With Lista workbenches and overhead cabinets, Wishard Memorial Hospital was able to consolidate their Biomedical Engineering Department into a very organized and productive workspace, using dramatically less square footage than prior equipment. Lista’s modular cabinet drawers also simplify the inventory of supplies and components. The Sony Electronics facility needed a more flexible workbench system that would be strong enough for working with and storing heavy electronic equipment. Lista’s workbenches, featuring the FlexWorks® Accessory System, have proven an ideal solution, serving a variety of functions and offering the necessary weight-bearing capacity. Sony also chose Lista mobile cabinets, which are used for housing a range of parts and tools. 70 71 How to Order Custom Workbenches from Lista These are the basic steps Workbench Tops Lista workbench tops are all 3 required for ordering custom work- easy to maintain, rugged, and benches from Lista. 3 ■ To order an Easy-Order combi- ■ ■ ■ ■ 3 nation (workbench with preconfigured accessories) see pages 80-81 for industrial workbenches and pages 82-83 for technical 1 2 4 This warp-free and oil resistant 1 3 ⁄ 4" thick top has a wood core and a 3 ⁄ 8" thick sanded pressed wood finish, top and bottom. SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep 48" long x 36" deep 60" long x 36" deep 72" long x 36" deep 84" long x 36" deep 96" long x 36" deep Same construction as the standard Lista Top with an additional heavy gauge, galvanized steel cover that is fitted over top and sides of wood core. Top is 1 3 ⁄ 4" thick. ch Order Sample Workben QUANTITY 1 1 1 1 PART NO. MTOP-60 NTL33.5x28.5 ST-60NTLMP MP600-3A-I Housing: BB Drawers: BB TBS60 IRSS20 1 1 1 1 1 IRSS20/15 MS6012 TBS60 BB 72 DESCRIPTION ch top maple workben 1 2 technical leg 2 stringer 2 binet Easy-Order ca 4 int bright blue pa 4 int bright blue pa 3 backstop pport 3 instru. riser su pport 3 instru. riser su 3 elf instru. riser sh 3 shelf backstop 4 paint bright blue 1 Select Workbench Top Select the top that best suits your needs from the choices on page 73. Choose the top length, depth and style that you prefer. 2 Select Below-Worksurface 3 Select Above-Worksurface Accessories Select the backstop and endstops (page 78), shelves (stationary, adjustable or instrument riser — see pages 78-79) and/or FlexWorks ® components (pages 85-89) that best suit your needs. PART NO. LSTOP-48 LSTOP-60 LSTOP-72 LSTOP-84 LSTOP-96 LSTOP-4836 LSTOP-6036 LSTOP-7236 LSTOP-8436 LSTOP-9636 SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep 48" long x 36" deep 60" long x 36" deep 72" long x 36" deep 84" long x 36" deep 96" long x 36" deep Accessories Select either a 2 leg, a 1 leg with cabinet or a 2 cabinet configuration. Legs, stringers, bottom shelves and privacy panels are shown on pages 74-75. Hanging cabinets are shown on page 81. If you have selected a cabinet(s) pedestal, please see pages 42-43 for cabinet ordering instructions, or choose an Easy-Order cabinet from the appropriate pages. Maple Tops Satin finish 1 3 ⁄ 4" thick hard maple. Available in standard square edge (shown above) or radius/bullnose front edge. To order a radius/bullnose edge, add “-BN” to the end of the part number. PART NO. MTOP-48 MTOP-60 MTOP-72 MTOP-84 MTOP-96 MTOP-4836 MTOP-6036 MTOP-7236 MTOP-8436 MTOP-9636 SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep 48" long x 36" deep 60" long x 36" deep 72" long x 36" deep 84" long x 36" deep 96" long x 36" deep Galvanized Steel Over Wood Tops 2 2 Lista Tops PART NO. LTOP-48 LTOP-60 LTOP-72 LTOP-84 LTOP-96 LTOP-4836 LTOP-6036 LTOP-7236 LTOP-8436 LTOP-9636 3 workbenches. durable. 4 Select Colors Select a color from the color chart on the back cover. Cabinet housing and drawer fronts can be different colors, but drawer interiors are always gray. Phenolic Tops Features a high-pressure laminate designed for laboratory worksurfaces. Resistant to chemicals, stains or discoloration. Top is 1" thick phenolic resin, available in black. PART NO. RTOP-48 RTOP-60 RTOP-72 RTOP-84 RTOP-96 SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep Plastic Laminate Tops Woodcore center with plastic laminated top and sides. 1 9 ⁄ 16" thick. Dove gray is standard but other colors are available on request. Available in standard square edge or radius/bullnose front edge (shown above). To order a radius/bullnose edge, add “-BN” to the end of the part number. PART NO. PTOP-48 PTOP-60 PTOP-72 PTOP-84 PTOP-96 PTOP-4836 PTOP-6036 PTOP-7236 PTOP-8436 PTOP-9636 SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep 48" long x 36" deep 60" long x 36" deep 72" long x 36" deep 84" long x 36" deep 96" long x 36" deep Static Dissipative Plastic Laminate Tops Woodcore center with plastic laminated top and sides. 1 9 ⁄ 16" thick. Grounding bolt and a 12' grounding cord with a 1 megohm resistor are included. Standard color is white but other colors are available on request. Available in standard square edge or radius/bullnose front edge (shown above). To order a radius/ bullnose edge, add “-BN” to the end of the part number. Tops come in 48", 60", 72", 84" and 96" lengths, and are 30" or 36" deep. Other sizes are available special order, and certain tops are available with a radius/bullnose front edge. Specifications Surface resistivity: 108 -109 ohms, 100 volts Resistance to ground: 10 6 -10 7 typical, 1 x 10 8 -1 x 10 9 certified. Static Decay Rate: 5,000 to 0 volts, Fed test method 101C, Method 4048; 0.01 sec. typical; less than 0.05 sec. certified. Certification: EOS/ESD Association standard number s4.1-1990 Work Surfaces Resistive Characterization. PART NO. SDTOP-48 SDTOP-60 SDTOP-72 SDTOP-84 SDTOP-96 SDTOP-4836 SDTOP-6036 SDTOP-7236 SDTOP-8436 SDTOP-9636 SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep 48" long x 36" deep 60" long x 36" deep 72" long x 36" deep 84" long x 36" deep 96" long x 36" deep Stainless Steel Over Wood Tops Top is constructed of durable, heavy gauge stainless steel, fitted over top and sides of wood core. Top is 1 3 ⁄ 4" thick. PART NO. LSSTOP-4830 LSSTOP-6030 LSSTOP-7230 LSSTOP-8430 LSSTOP-9630 LSSTOP-4836 LSSTOP-6036 LSSTOP-7236 LSSTOP-8436 LSSTOP-9636 SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep 48" long x 36" deep 60" long x 36" deep 72" long x 36" deep 84" long x 36" deep 96" long x 36" deep 73 How to Order Custom Workbenches from Lista These are the basic steps Workbench Tops Lista workbench tops are all 3 required for ordering custom work- easy to maintain, rugged, and benches from Lista. 3 ■ To order an Easy-Order combi- ■ ■ ■ ■ 3 nation (workbench with preconfigured accessories) see pages 80-81 for industrial workbenches and pages 82-83 for technical 1 2 4 This warp-free and oil resistant 1 3 ⁄ 4" thick top has a wood core and a 3 ⁄ 8" thick sanded pressed wood finish, top and bottom. SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep 48" long x 36" deep 60" long x 36" deep 72" long x 36" deep 84" long x 36" deep 96" long x 36" deep Same construction as the standard Lista Top with an additional heavy gauge, galvanized steel cover that is fitted over top and sides of wood core. Top is 1 3 ⁄ 4" thick. ch Order Sample Workben QUANTITY 1 1 1 1 PART NO. MTOP-60 NTL33.5x28.5 ST-60NTLMP MP600-3A-I Housing: BB Drawers: BB TBS60 IRSS20 1 1 1 1 1 IRSS20/15 MS6012 TBS60 BB 72 DESCRIPTION ch top maple workben 1 2 technical leg 2 stringer 2 binet Easy-Order ca 4 int bright blue pa 4 int bright blue pa 3 backstop pport 3 instru. riser su pport 3 instru. riser su 3 elf instru. riser sh 3 shelf backstop 4 paint bright blue 1 Select Workbench Top Select the top that best suits your needs from the choices on page 73. Choose the top length, depth and style that you prefer. 2 Select Below-Worksurface 3 Select Above-Worksurface Accessories Select the backstop and endstops (page 78), shelves (stationary, adjustable or instrument riser — see pages 78-79) and/or FlexWorks ® components (pages 85-89) that best suit your needs. PART NO. LSTOP-48 LSTOP-60 LSTOP-72 LSTOP-84 LSTOP-96 LSTOP-4836 LSTOP-6036 LSTOP-7236 LSTOP-8436 LSTOP-9636 SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep 48" long x 36" deep 60" long x 36" deep 72" long x 36" deep 84" long x 36" deep 96" long x 36" deep Accessories Select either a 2 leg, a 1 leg with cabinet or a 2 cabinet configuration. Legs, stringers, bottom shelves and privacy panels are shown on pages 74-75. Hanging cabinets are shown on page 81. If you have selected a cabinet(s) pedestal, please see pages 42-43 for cabinet ordering instructions, or choose an Easy-Order cabinet from the appropriate pages. Maple Tops Satin finish 1 3 ⁄ 4" thick hard maple. Available in standard square edge (shown above) or radius/bullnose front edge. To order a radius/bullnose edge, add “-BN” to the end of the part number. PART NO. MTOP-48 MTOP-60 MTOP-72 MTOP-84 MTOP-96 MTOP-4836 MTOP-6036 MTOP-7236 MTOP-8436 MTOP-9636 SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep 48" long x 36" deep 60" long x 36" deep 72" long x 36" deep 84" long x 36" deep 96" long x 36" deep Galvanized Steel Over Wood Tops 2 2 Lista Tops PART NO. LTOP-48 LTOP-60 LTOP-72 LTOP-84 LTOP-96 LTOP-4836 LTOP-6036 LTOP-7236 LTOP-8436 LTOP-9636 3 workbenches. durable. 4 Select Colors Select a color from the color chart on the back cover. Cabinet housing and drawer fronts can be different colors, but drawer interiors are always gray. Phenolic Tops Features a high-pressure laminate designed for laboratory worksurfaces. Resistant to chemicals, stains or discoloration. Top is 1" thick phenolic resin, available in black. PART NO. RTOP-48 RTOP-60 RTOP-72 RTOP-84 RTOP-96 SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep Plastic Laminate Tops Woodcore center with plastic laminated top and sides. 1 9 ⁄ 16" thick. Dove gray is standard but other colors are available on request. Available in standard square edge or radius/bullnose front edge (shown above). To order a radius/bullnose edge, add “-BN” to the end of the part number. PART NO. PTOP-48 PTOP-60 PTOP-72 PTOP-84 PTOP-96 PTOP-4836 PTOP-6036 PTOP-7236 PTOP-8436 PTOP-9636 SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep 48" long x 36" deep 60" long x 36" deep 72" long x 36" deep 84" long x 36" deep 96" long x 36" deep Static Dissipative Plastic Laminate Tops Woodcore center with plastic laminated top and sides. 1 9 ⁄ 16" thick. Grounding bolt and a 12' grounding cord with a 1 megohm resistor are included. Standard color is white but other colors are available on request. Available in standard square edge or radius/bullnose front edge (shown above). To order a radius/ bullnose edge, add “-BN” to the end of the part number. Tops come in 48", 60", 72", 84" and 96" lengths, and are 30" or 36" deep. Other sizes are available special order, and certain tops are available with a radius/bullnose front edge. Specifications Surface resistivity: 108 -109 ohms, 100 volts Resistance to ground: 10 6 -10 7 typical, 1 x 10 8 -1 x 10 9 certified. Static Decay Rate: 5,000 to 0 volts, Fed test method 101C, Method 4048; 0.01 sec. typical; less than 0.05 sec. certified. Certification: EOS/ESD Association standard number s4.1-1990 Work Surfaces Resistive Characterization. PART NO. SDTOP-48 SDTOP-60 SDTOP-72 SDTOP-84 SDTOP-96 SDTOP-4836 SDTOP-6036 SDTOP-7236 SDTOP-8436 SDTOP-9636 SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep 48" long x 36" deep 60" long x 36" deep 72" long x 36" deep 84" long x 36" deep 96" long x 36" deep Stainless Steel Over Wood Tops Top is constructed of durable, heavy gauge stainless steel, fitted over top and sides of wood core. Top is 1 3 ⁄ 4" thick. PART NO. LSSTOP-4830 LSSTOP-6030 LSSTOP-7230 LSSTOP-8430 LSSTOP-9630 LSSTOP-4836 LSSTOP-6036 LSSTOP-7236 LSSTOP-8436 LSSTOP-9636 SIZE 48" long x 30" deep 60" long x 30" deep 72" long x 30" deep 84" long x 30" deep 96" long x 30" deep 48" long x 36" deep 60" long x 36" deep 72" long x 36" deep 84" long x 36" deep 96" long x 36" deep 73 Workbench Below-Worksurface Accessories The components on these two pages are the options available for Same basic construction as the standard leg but with 2 factory mounted 6" heavy duty casters. Leg is available with rigid casters or swivel casters with locks, indicated by “RB” or “SB” at the end of the part number. Requires stringer. supporting your workbench top. Workbenches may also be supported by a pair of cabinets, or by one cabinet plus one of the legs shown on these pages. All parts must be ordered separately. How to order workbench below-worksurface accessories 1. Select benchtop length (see page 73). 2. Select base configuration, including number of cabinets (if any), cabinet size (Narrow Width, MP Width) and number of legs (if any). Note: Sets of legs must be ordered at matching heights. Individual legs must be ordered to match the overall height of the cabinet or cabinet plus base (see chart to right). 3. Select stringer, bottom shelf or privacy panel part numbers to correspond to both length of benchtop and base configuration. 4. Specify color from the chart on the back cover. Lista Legs Rigid Casters Each welded one-piece leg assembly is 3 1⁄ 8" wide heavy gauge steel. Each foot has a bottom hole for leveling glide or anchor for floor mounting. To order leveling glides, add “-G” to the end of the part number. PART NO. NM33.5X22.5RB NM33.5X28.5RB NM33.5X34.5RB NM35.5X22.5RB NM35.5X28.5RB NM35.5X34.5RB PART NO. 27 1 ⁄ 2" (700mm) High NLL27.5x22.5 NLL27.5x28.5 NLL27.5x34.5 29 1 ⁄ 2" (750mm) High NLL29.5x22.5 NLL29.5x28.5 NLL29.5x34.5 31 1 ⁄ 2" (800mm) High NLL31.5x22.5 NLL31.5x28.5 NLL31.5x34.5 33 1 ⁄ 2" (850mm) High NLL33.5x22.5 NLL33.5x28.5 NLL33.5x34.5 39 1 ⁄ 2" (1000mm) High NLL39.5x22.5 NLL39.5x28.5 NLL39.5x34.5 TOP DEPTH 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) Lista Panel Legs 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) Use the leg heights shown below to match a cabinet pedestal in a leg-pluscabinet below worksurface configuration. LEG HEIGHT 27 1/2" 29 1/2" 31 1/2" 33 1/2" 35 1/2" mobile 39 1/2" MATCHES CAB. PEDESTAL 600 height without base 600 height with 2" base 600 height with 4" base 600 height with 6" base or 750 height without base 600 height with mobile base 900 height without base Technical Mobile Legs Comes with 2 factory-mounted 3 1 ⁄ 2" x 1 1 ⁄ 4" casters. Leg is available with rigid casters or swivel casters with locks, indicated by “RB” or “SB” at the end of the part number. A stringer is required for 2- leg models. HEIGHT 33 1⁄ 2" (850mm) 33 1⁄ 2" (850mm) 33 1⁄ 2" (850mm) 35 1⁄ 2" (900mm) 35 1⁄ 2" (900mm) 35 1⁄ 2" (900mm) TOP DEPTH 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) Technical Bench Legs Comes with glides for leveling on uneven surfaces. Can be configured for right or left hand installation. Assembly is required. Removable end caps allow access to glides. Removable side panel can be ordered in a different color. PART NO. Rigid Casters TM33.5X22.5RB TM33.5X28.5RB Swivel Casters TM33.5X22.5SB TM33.5X28.5SB FOR USE WITH 24" depth top 30" depth top Stringers/Foot Rests Heavy gauge U channel with 2 mounting holes on each end plate. PART NO. NST-48 ■ ■ NST-60 ■ ■ NST-72 ■ ■ NST-84 ■ ■ NST-96 ■ ■ HEIGHT 33 1⁄ 2" (850mm) 33 1⁄ 2" (850mm) 33 1⁄ 2" (850mm) 35 1⁄ 2" (900mm) 35 1⁄ 2" (900mm) 35 1⁄ 2" (900mm) TOP DEPTH 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) Same basic construction as the standard Lista Leg with a welded panel on the outside of the leg. For Lista Legs only. PART NO. 27 1 ⁄ 2" (700mm) High NPL27.5x22.5 NPL27.5x28.5 NPL27.5x34.5 29 1 ⁄ 2" (750mm) High NPL29.5x22.5 NPL29.5x28.5 NPL29.5x34.5 31 1 ⁄ 2" (800mm) High NPL31.5x22.5 NPL31.5x28.5 NPL31.5x34.5 33 1 ⁄ 2" (850mm) High NPL33.5x22.5 NPL33.5x28.5 NPL33.5x34.5 39 1 ⁄ 2" (1000mm) High NPL39.5x22.5 NPL39.5x28.5 NPL39.5x34.5 TOP DEPTH PART NO. 27 1 ⁄ 2" (700mm) High NTL27.5x22.5 NTL27.5x28.5 29 1 ⁄ 2" (750mm) High NTL29.5x22.5 NTL29.5x28.5 31 1 ⁄ 2" (800mm) High NTL31.5x22.5 NTL31.5x28.5 33 1 ⁄ 2" (850mm) High NTL33.5x22.5 NTL33.5x28.5 35 1 ⁄ 2" (900mm) High NTL35.5x22.5 NTL35.5x28.5 39 1 ⁄ 2" (1000mm) High NTL39.5x22.5 NTL39.5x28.5 Privacy Panels 24" (610mm) 30" (762mm) 24" (610mm) 30" (762mm) 24" (610mm) 30" (762mm) 24" (610mm) 30" (762mm) 24" (610mm) 30" (762mm) NLL NTL NW MP TECHNICAL LEG PRIVACY PANEL Bottom Shelves Heavy gauge steel shelf, for use as storage or foot rest. Bolting Adjustable Height Legs Workbench height is adjusted by bolting frame in place. Height adjusts in 2" increments. Range is 27 1⁄ 2" to 39 1⁄ 2". Workbench top and accessories must be ordered separately. Uses stringers and bottom shelves shown in the charts to the right (privacy panel not available). PART NO. ALL22.5 ALL28.5 ALL34.5 PART NO. NBS-48 ■ ■ NBS-60 ■ ■ NBS-72 ■ ■ NBS-84 ■ ■ NBS-96 ■ ■ TOP LENGTH 48" 60" 72" 84" 96" NLL NTL NW MP = = = = Lista Leg technical bench leg narrow width cabinet MP width cabinet 3. Specify right-hand (facing the workbench) bench support (box ■). 24" depth top 30" depth top TOP DEPTH 24" (610mm) 30" (762mm) INDUSTRIAL LEG PRIVACY PANEL TOP LENGTH 48" 60" 72" 84" 96" Swivel Casters PART NO. NM33.5X22.5SB NM33.5X28.5SB NM33.5X34.5SB NM35.5X22.5SB NM35.5X28.5SB NM35.5X34.5SB Leg Heights 74 How to order a stringer, bottom shelf or privacy panel 1. Select top length 2. Specify left-hand (facing the workbench) bench support (box ■). Lista Mobile Legs Steel panel attaches to leg or cabinet and runs full length of benchtop. PART NO. NPP-48 ■ ■ NPP-60 ■ ■ NPP-72 ■ ■ NPP-84 ■ ■ NPP-96 ■ ■ = = = = Lista Leg technical bench leg narrow width cabinet MP width cabinet EXAMPLE: to order a bottom shelf for a workbench with a 72" top, an MP Width cabinet as the left-hand pedestal and a technical bench leg as the right-hand pedestal, the part number would be BS-72 MPNTL. TOP LENGTH 48" 60" 72" 84" 96" FOR USE WITH 24" depth top 30" depth top 36" depth top 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) 75 Workbench Below-Worksurface Accessories The components on these two pages are the options available for Same basic construction as the standard leg but with 2 factory mounted 6" heavy duty casters. Leg is available with rigid casters or swivel casters with locks, indicated by “RB” or “SB” at the end of the part number. Requires stringer. supporting your workbench top. Workbenches may also be supported by a pair of cabinets, or by one cabinet plus one of the legs shown on these pages. All parts must be ordered separately. How to order workbench below-worksurface accessories 1. Select benchtop length (see page 73). 2. Select base configuration, including number of cabinets (if any), cabinet size (Narrow Width, MP Width) and number of legs (if any). Note: Sets of legs must be ordered at matching heights. Individual legs must be ordered to match the overall height of the cabinet or cabinet plus base (see chart to right). 3. Select stringer, bottom shelf or privacy panel part numbers to correspond to both length of benchtop and base configuration. 4. Specify color from the chart on the back cover. Lista Legs Rigid Casters Each welded one-piece leg assembly is 3 1⁄ 8" wide heavy gauge steel. Each foot has a bottom hole for leveling glide or anchor for floor mounting. To order leveling glides, add “-G” to the end of the part number. PART NO. NM33.5X22.5RB NM33.5X28.5RB NM33.5X34.5RB NM35.5X22.5RB NM35.5X28.5RB NM35.5X34.5RB PART NO. 27 1 ⁄ 2" (700mm) High NLL27.5x22.5 NLL27.5x28.5 NLL27.5x34.5 29 1 ⁄ 2" (750mm) High NLL29.5x22.5 NLL29.5x28.5 NLL29.5x34.5 31 1 ⁄ 2" (800mm) High NLL31.5x22.5 NLL31.5x28.5 NLL31.5x34.5 33 1 ⁄ 2" (850mm) High NLL33.5x22.5 NLL33.5x28.5 NLL33.5x34.5 39 1 ⁄ 2" (1000mm) High NLL39.5x22.5 NLL39.5x28.5 NLL39.5x34.5 TOP DEPTH 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) Lista Panel Legs 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) Use the leg heights shown below to match a cabinet pedestal in a leg-pluscabinet below worksurface configuration. LEG HEIGHT 27 1/2" 29 1/2" 31 1/2" 33 1/2" 35 1/2" mobile 39 1/2" MATCHES CAB. PEDESTAL 600 height without base 600 height with 2" base 600 height with 4" base 600 height with 6" base or 750 height without base 600 height with mobile base 900 height without base Technical Mobile Legs Comes with 2 factory-mounted 3 1 ⁄ 2" x 1 1 ⁄ 4" casters. Leg is available with rigid casters or swivel casters with locks, indicated by “RB” or “SB” at the end of the part number. A stringer is required for 2- leg models. HEIGHT 33 1⁄ 2" (850mm) 33 1⁄ 2" (850mm) 33 1⁄ 2" (850mm) 35 1⁄ 2" (900mm) 35 1⁄ 2" (900mm) 35 1⁄ 2" (900mm) TOP DEPTH 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) Technical Bench Legs Comes with glides for leveling on uneven surfaces. Can be configured for right or left hand installation. Assembly is required. Removable end caps allow access to glides. Removable side panel can be ordered in a different color. PART NO. Rigid Casters TM33.5X22.5RB TM33.5X28.5RB Swivel Casters TM33.5X22.5SB TM33.5X28.5SB FOR USE WITH 24" depth top 30" depth top Stringers/Foot Rests Heavy gauge U channel with 2 mounting holes on each end plate. PART NO. NST-48 ■ ■ NST-60 ■ ■ NST-72 ■ ■ NST-84 ■ ■ NST-96 ■ ■ HEIGHT 33 1⁄ 2" (850mm) 33 1⁄ 2" (850mm) 33 1⁄ 2" (850mm) 35 1⁄ 2" (900mm) 35 1⁄ 2" (900mm) 35 1⁄ 2" (900mm) TOP DEPTH 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) Same basic construction as the standard Lista Leg with a welded panel on the outside of the leg. For Lista Legs only. PART NO. 27 1 ⁄ 2" (700mm) High NPL27.5x22.5 NPL27.5x28.5 NPL27.5x34.5 29 1 ⁄ 2" (750mm) High NPL29.5x22.5 NPL29.5x28.5 NPL29.5x34.5 31 1 ⁄ 2" (800mm) High NPL31.5x22.5 NPL31.5x28.5 NPL31.5x34.5 33 1 ⁄ 2" (850mm) High NPL33.5x22.5 NPL33.5x28.5 NPL33.5x34.5 39 1 ⁄ 2" (1000mm) High NPL39.5x22.5 NPL39.5x28.5 NPL39.5x34.5 TOP DEPTH PART NO. 27 1 ⁄ 2" (700mm) High NTL27.5x22.5 NTL27.5x28.5 29 1 ⁄ 2" (750mm) High NTL29.5x22.5 NTL29.5x28.5 31 1 ⁄ 2" (800mm) High NTL31.5x22.5 NTL31.5x28.5 33 1 ⁄ 2" (850mm) High NTL33.5x22.5 NTL33.5x28.5 35 1 ⁄ 2" (900mm) High NTL35.5x22.5 NTL35.5x28.5 39 1 ⁄ 2" (1000mm) High NTL39.5x22.5 NTL39.5x28.5 Privacy Panels 24" (610mm) 30" (762mm) 24" (610mm) 30" (762mm) 24" (610mm) 30" (762mm) 24" (610mm) 30" (762mm) 24" (610mm) 30" (762mm) NLL NTL NW MP TECHNICAL LEG PRIVACY PANEL Bottom Shelves Heavy gauge steel shelf, for use as storage or foot rest. Bolting Adjustable Height Legs Workbench height is adjusted by bolting frame in place. Height adjusts in 2" increments. Range is 27 1⁄ 2" to 39 1⁄ 2". Workbench top and accessories must be ordered separately. Uses stringers and bottom shelves shown in the charts to the right (privacy panel not available). PART NO. ALL22.5 ALL28.5 ALL34.5 PART NO. NBS-48 ■ ■ NBS-60 ■ ■ NBS-72 ■ ■ NBS-84 ■ ■ NBS-96 ■ ■ TOP LENGTH 48" 60" 72" 84" 96" NLL NTL NW MP = = = = Lista Leg technical bench leg narrow width cabinet MP width cabinet 3. Specify right-hand (facing the workbench) bench support (box ■). 24" depth top 30" depth top TOP DEPTH 24" (610mm) 30" (762mm) INDUSTRIAL LEG PRIVACY PANEL TOP LENGTH 48" 60" 72" 84" 96" Swivel Casters PART NO. NM33.5X22.5SB NM33.5X28.5SB NM33.5X34.5SB NM35.5X22.5SB NM35.5X28.5SB NM35.5X34.5SB Leg Heights 74 How to order a stringer, bottom shelf or privacy panel 1. Select top length 2. Specify left-hand (facing the workbench) bench support (box ■). Lista Mobile Legs Steel panel attaches to leg or cabinet and runs full length of benchtop. PART NO. NPP-48 ■ ■ NPP-60 ■ ■ NPP-72 ■ ■ NPP-84 ■ ■ NPP-96 ■ ■ = = = = Lista Leg technical bench leg narrow width cabinet MP width cabinet EXAMPLE: to order a bottom shelf for a workbench with a 72" top, an MP Width cabinet as the left-hand pedestal and a technical bench leg as the right-hand pedestal, the part number would be BS-72 MPNTL. TOP LENGTH 48" 60" 72" 84" 96" FOR USE WITH 24" depth top 30" depth top 36" depth top 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) 24" (610mm) 30" (762mm) 36" (915mm) 75 Height-Right ® Workbenches The Height-Right workbench is a clean, aesthetically pleasing Innovative features include: • Precision drive system for relia- workbench that brings to the user bility and low maintenance an unsurpassed level of ergonomic • Available in 48", 60" and 72" comfort, flexible functionality and lengths and 30" and 36" depths enhanced productivity. With an (custom sizes are available upon electrically adjustable bench height request) ranging from 28" to 43" (15" total), this workspace solution is designed with the operator in mind. It reduces fatigue, stress and potential injury. The Height-Right workbench is ideally suited for the Height-Right Easy-Order Cabinets Cabinets are 24 3⁄ 16" high (including base) x 16 7⁄ 8" wide x 28 1⁄ 2" deep. • Available in ten standard colors (shown on the back cover) • Load capacity 1200 lb. static and 600 lb. dynamic • One foot per minute adjusting Height-Right Hanging Cabinets Height-Right® Electric Bases Workbench top and accessories must be ordered separately. Includes stringer. PART NO. HR4830E HR6030E HR7230E HR4836E HR6036E HR7236E FOR USE WITH TOP SIZE 48" x 30" 60" x 30" 72" x 30" 48" x 36" 60" x 36" 72" x 36" speed repairing, testing, and assembling Height-Right Manual Crank Bases Workbench height is adjusted by non-electric manual crank. Workbench top and accessories must be ordered separately. Includes stringer. PART NO. HR4830C HR6030C HR7230C HR4836C HR6036C HR7236C of mechanical and electronic products and components. FOR USE WITH TOP SIZE 48" x 30" 60" x 30" 72" x 30" 48" x 36" 60" x 36" 72" x 36" These cabinets provide convenient below-worksurface storage where less than a full cabinet pedestal (see right) is needed. All Narrow Width (NW) cabinets are 16 7⁄8" wide x 28 1⁄ 2" deep. All MP Width cabinets are 22 3 ⁄ 16" wide x 28 1⁄ 2" deep. Each cabinet is suspended from the workbench top, and comes with an individual lock and 2 keys. PART NO. HC/NW50-HR HC/NW75-HR HC/NW100-HR HC/NW150-HR HC/NW300FFH-HR HC/MP50-HR HC/MP75-HR HC/MP100-HR HC/MP150-HR DRAWER HEIGHT 1 3 ⁄ 8" 2 3 ⁄ 8" 3 3 ⁄ 8" 5 1⁄ 4" 11" 1 3 ⁄ 8" 2 3 ⁄ 8" 3 3 ⁄ 8" 5 1⁄ 4" How to order a Height-Right Easy-Order Cabinet 1. Select Easy-Order Cabinet Combination either with or without drawer interior sets. An “A” at the end of the part number (i.e., NW375-2A) designates that the cabinet comes with drawer interior sets (shown on page 13). 2. Select lock type (box ■). For lock options see page 42. N = none I = individual 3. Select color(s) for housing and drawer fronts (see back cover for color chart). EXAMPLE: to order an NW375-2A cabinet with an individual lock, and a Bright Blue cabinet housing and Pearl Gray drawers, the part number would be NW375-2A-I , and the paint color codes would be “BB” for the housing and “PG” for the drawer fronts. Height-Right Mobile Kit Comes with four 3 1⁄ 2" x 1 1⁄ 4" swivel casters, 2 with lock and 2 without lock. Casters add 4 3 ⁄ 4" to overall height. To order, add “-M” to end of electric or manual crank base part number. K = keyed-alike M = master DRAWER INTERIOR 75N 300N-FFH 209 FILE DRAWER 5" BASE PART NO. NW375-1- ■ NW375-1A- ■ Compatible with all Lista aboveworksurface workbench options DRAWERS COMPARTS. 2 2 9 DRAWER INTERIOR 75N 100N 200N 209 104 104 5" BASE Plastic laminate, maple, ESD and phenolic worksurfaces Easily accessible operator switch Height-Right Companion Cabinets PART NO. NW375-2- ■ NW375-2A- ■ Cabinet fits over workbench stringer. Height of cabinet conforms to lowest height of HeightRight benchtop. Height-Right Easy-Order cabinets are shown to the right. INTERIOR 75N 75N 100N 125N 209 209 104 104 5" BASE Optional companion cabinet or hanging cabinet 76 DRAWER PART NO. NW375-3- ■ NW375-3A- ■ Removable leg panel, allows for two-tone color selections Removable leg end caps, for clean look and quick access to leveling adjustments DRAWERS COMPARTS. 3 3 17 Companion cabinet (see column to far right) fits perfectly under the HeightRight benchtop at its lowest 28" height. DRAWERS COMPARTS. 4 4 26 DRAWER INTERIOR 75N 75N 75N 75N 75N 018 209 209 104 104 5" BASE PART NO. NW375-4- ■ NW375-4A- ■ DRAWERS COMPARTS. 5 5 44 77 Height-Right ® Workbenches The Height-Right workbench is a clean, aesthetically pleasing Innovative features include: • Precision drive system for relia- workbench that brings to the user bility and low maintenance an unsurpassed level of ergonomic • Available in 48", 60" and 72" comfort, flexible functionality and lengths and 30" and 36" depths enhanced productivity. With an (custom sizes are available upon electrically adjustable bench height request) ranging from 28" to 43" (15" total), this workspace solution is designed with the operator in mind. It reduces fatigue, stress and potential injury. The Height-Right workbench is ideally suited for the Height-Right Easy-Order Cabinets Cabinets are 24 3⁄ 16" high (including base) x 16 7⁄ 8" wide x 28 1⁄ 2" deep. • Available in ten standard colors (shown on the back cover) • Load capacity 1200 lb. static and 600 lb. dynamic • One foot per minute adjusting Height-Right Hanging Cabinets Height-Right® Electric Bases Workbench top and accessories must be ordered separately. Includes stringer. PART NO. HR4830E HR6030E HR7230E HR4836E HR6036E HR7236E FOR USE WITH TOP SIZE 48" x 30" 60" x 30" 72" x 30" 48" x 36" 60" x 36" 72" x 36" speed repairing, testing, and assembling Height-Right Manual Crank Bases Workbench height is adjusted by non-electric manual crank. Workbench top and accessories must be ordered separately. Includes stringer. PART NO. HR4830C HR6030C HR7230C HR4836C HR6036C HR7236C of mechanical and electronic products and components. FOR USE WITH TOP SIZE 48" x 30" 60" x 30" 72" x 30" 48" x 36" 60" x 36" 72" x 36" These cabinets provide convenient below-worksurface storage where less than a full cabinet pedestal (see right) is needed. All Narrow Width (NW) cabinets are 16 7⁄8" wide x 28 1⁄ 2" deep. All MP Width cabinets are 22 3 ⁄ 16" wide x 28 1⁄ 2" deep. Each cabinet is suspended from the workbench top, and comes with an individual lock and 2 keys. PART NO. HC/NW50-HR HC/NW75-HR HC/NW100-HR HC/NW150-HR HC/NW300FFH-HR HC/MP50-HR HC/MP75-HR HC/MP100-HR HC/MP150-HR DRAWER HEIGHT 1 3 ⁄ 8" 2 3 ⁄ 8" 3 3 ⁄ 8" 5 1⁄ 4" 11" 1 3 ⁄ 8" 2 3 ⁄ 8" 3 3 ⁄ 8" 5 1⁄ 4" How to order a Height-Right Easy-Order Cabinet 1. Select Easy-Order Cabinet Combination either with or without drawer interior sets. An “A” at the end of the part number (i.e., NW375-2A) designates that the cabinet comes with drawer interior sets (shown on page 13). 2. Select lock type (box ■). For lock options see page 42. N = none I = individual 3. Select color(s) for housing and drawer fronts (see back cover for color chart). EXAMPLE: to order an NW375-2A cabinet with an individual lock, and a Bright Blue cabinet housing and Pearl Gray drawers, the part number would be NW375-2A-I , and the paint color codes would be “BB” for the housing and “PG” for the drawer fronts. Height-Right Mobile Kit Comes with four 3 1⁄ 2" x 1 1⁄ 4" swivel casters, 2 with lock and 2 without lock. Casters add 4 3 ⁄ 4" to overall height. To order, add “-M” to end of electric or manual crank base part number. K = keyed-alike M = master DRAWER INTERIOR 75N 300N-FFH 209 FILE DRAWER 5" BASE PART NO. NW375-1- ■ NW375-1A- ■ Compatible with all Lista aboveworksurface workbench options DRAWERS COMPARTS. 2 2 9 DRAWER INTERIOR 75N 100N 200N 209 104 104 5" BASE Plastic laminate, maple, ESD and phenolic worksurfaces Easily accessible operator switch Height-Right Companion Cabinets PART NO. NW375-2- ■ NW375-2A- ■ Cabinet fits over workbench stringer. Height of cabinet conforms to lowest height of HeightRight benchtop. Height-Right Easy-Order cabinets are shown to the right. INTERIOR 75N 75N 100N 125N 209 209 104 104 5" BASE Optional companion cabinet or hanging cabinet 76 DRAWER PART NO. NW375-3- ■ NW375-3A- ■ Removable leg panel, allows for two-tone color selections Removable leg end caps, for clean look and quick access to leveling adjustments DRAWERS COMPARTS. 3 3 17 Companion cabinet (see column to far right) fits perfectly under the HeightRight benchtop at its lowest 28" height. DRAWERS COMPARTS. 4 4 26 DRAWER INTERIOR 75N 75N 75N 75N 75N 018 209 209 104 104 5" BASE PART NO. NW375-4- ■ NW375-4A- ■ DRAWERS COMPARTS. 5 5 44 77 The bench components on these Instrument Riser Shelf Rear Panels two pages allow you to customize above the worksurface for your particular needs. All parts must be ordered separately to match the length of the workbench top you have chosen. Backstops PART NO. TBS-48 TBS-60 TBS-72 TBS-84 TBS-96 TOP LENGTH 48" 60" 72" 84" 96" Backstop and Endstop Sets PART NO. BES-48 BES-60 BES-72 BES-84 BES-96 TOP LENGTH 48" 60" 72" 84" 96" Stationary Riser Shelves Made of steel to support heavy loads. Shelf is 10 1⁄ 2" deep x 13 1⁄ 2" high. Optional full rear panel (shown above) extends from benchtop to form back panel and backstop for shelf (part number ending in -2). Contact Lista for other sizes. Open Riser Shelves open shelf (open back, no shelf backstop) PART NO. SRS48 SRS60 SRS72 SRS84 SRS96 TOP LENGTH 48" 60" 72" 84" 96" Open Riser Shelves with Shelf Backstop shelf with backstop (open back) PART NO. SRS48-1 SRS60-1 SRS72-1 SRS84-1 SRS96-1 TOP LENGTH 48" 60" 72" 84" 96" Riser Shelves with Full Panel (Shown) closed back, with shelf backstop PART NO. SRS48-2 SRS60-2 SRS72-2 SRS84-2 SRS96-2 ES TOP LENGTH 48" 60" 72" 84" 96" any DESCRIPTION riser shelf riser shelf riser shelf riser shelf riser shelf endstops (pair) Adjustable Riser Shelf Assemblies Shelves measure 1 1⁄ 4" thick x 12" deep, available in laminated gray plastic, static dissipative white plastic or maple. Shelf can be adjusted in 1 1⁄ 2" increments from a low of 12" to an overall height of 18". A separate steel backstop with rounded corners is available for the shelf. Includes the number of adjustable support brackets shown in the charts. Plastic Adjustable Riser Shelf Assembly PART NO. ARS48P ARS60P ARS72P ARS84P ARS96P TOP LENGTH 48" 60" 72" 84" 96" SUPPORTS 2 2 2 3 3 Static Dissipative Adjustable Riser Shelf Assembly* PART NO. TOP LENGTH SUPPORTS ARS48SD 48" 2 ARS60SD 60" 2 ARS72SD 72" 2 ARS84SD 84" 3 ARS96SD 96" 3 *See page 73 for static dissipative specifications. Comes with grounding bolt and grounding cord. Maple Adjustable Riser Shelf Assembly PART NO. ARS48M ARS60M ARS72M ARS84M ARS96M TOP LENGTH 48" 60" 72" 84" 96" SUPPORTS 2 2 2 2 3 Riser Shelf Backstops (For Adjustable and Instruments Risers) Made of steel with rounded edges for safety. Stops extend approximately 3" above the shelf surface. PART NO. ARSBS-48 ARSBS-60 ARSBS-72 ARSBS-84 ARSBS-96 TOP LENGTH 48" 60" 72" 84" 96" AVAIL A ESD Accessories Full rear panel extends from benchtop to form back panel between the worksurface and riser shelf, flush with the shelf. Also available with a 2" backstop for the riser shelf. To order a backstop for an instrument riser shelf without rear panel, see the chart on page 78. Backstops and Endstops Made of steel with rounded edges for safety. Stops extend approximately 3" above the workbench top. D E BL ES Workbench Above-Worksurface Accessories Instrument Riser Shelf Supports Instrument Riser Shelves Either 16", 20" or 24" high, channel-front with smooth finished corners and removable side panels. 20" and 24" models provide extra space to run air lines or meet additional power requirements. Ordered individually. All shelves measure 1 1⁄ 4" thick x 12" or 15" deep and mount to shelf supports. Add “12” or “15” in place of the red box in the part number to specify a shelf depth of 12" or 15" Backstops for instrument riser shelves can be ordered from the chart on page 78. 16" Instrument Riser Shelf Supports PART NO. IRSS16 IRSS16/15 IRSS16/20 IRSS16/GF-15 HEIGHT 16" 16" 16" 16" DESCRIPTION no power with 15 amp with 20 amp with 15 amp GFCI 20" Instrument Riser Shelf Supports PART NO. IRSS20 IRSS20/15 IRSS20/20 IRSS20/GF-15 HEIGHT 20" 20" 20" 20" DESCRIPTION no power with 15 amp with 20 amp with15 amp GFCI 24" Instrument Riser Shelf Supports PART NO. IRSS24 IRSS24/15 IRSS24/20 IRSS24/GF-15 HEIGHT 24" 24" 24" 24" DESCRIPTION no power with 15 amp with 20 amp with15 amp GFCI Static Dissipative Instrument Riser Shelves* PART NO. LENGTH FINISH SD48 ■ 48" white laminate SD60 ■ 60" white laminate SD72 ■ 72" white laminate SD84 ■ ** 84" white laminate SD96 ■ ** 96" white laminate * See page 73 for static dissipative specifications. Comes with grounding bolt and grounding cord. ** Lista recommends using a center support with 84" and 96" shelves Plastic Laminate Instrument Riser Shelves PART NO. LENGTH FINISH PS48 ■ 48" gray laminate PS60 ■ 60" gray laminate PS72 ■ 72" gray laminate PS84 ■ * 84" gray laminate PS96 ■ * 96" gray laminate * Lista recommends using a center support with 84" and 96" shelves Maple Instrument Riser Shelves PART NO. LENGTH FINISH MS48 ■ 48" maple MS60 ■ 60" maple MS72 ■ 72" maple MS84 ■ * 84" maple MS96 ■ * 96" maple * Lista recommends using a center support with 84" and 96" shelves Rear Panel Wrist Strap and Cord PART NO. TOP LENGTH 48" 48" 48" 60" 60" 60" 72" 72" 72" IRS-FRP4816 IRS-FRP4820 IRS-FRP4824 IRS-FRP6016 IRS-FRP6020 IRS-FRP6024 IRS-FRP7216 IRS-FRP7220 IRS-FRP7224 SHELF SUPPORT HEIGHT 16" 20" 24" 16" 20" 24" 16" 20" 24" 3M Charge-Guard ® adjustable wrist strap with 5' coiled cord. PART NO. WS DESCRIPTION wrist strap and cord ■ Rear Panel with 2" Backstop PART NO. TOP LENGTH 48" 48" 48" 60" 60" 60" 72" 72" 72" IRS-FRP4816-2 IRS-FRP4820-2 IRS-FRP4824-2 IRS-FRP6016-2 IRS-FRP6020-2 IRS-FRP6024-2 IRS-FRP7216-2 IRS-FRP7220-2 IRS-FRP7224-2 • SHELF SUPPORT HEIGHT 16" 20" 24" 16" 20" 24" 16" 20" 24" Available in 15 amp or 20 amp, and GFCI. Lighted on/off switch, 6' cord with grounded plug and circuit breaker. 110V. PART NO. EOP15-15 EOP15-20 EOP15-GF-15 EOP-48 DESCRIP. 15 amp 20 amp GFCI-15 amp 15 amp OUTLETS 6 6 6 8 LGTH. 15" 15" 15" 48" ■ ■ ■ ■ ■ ■ Wrist strap • • Ground block Common ground • To earth ground Ground Block and Cord Ground block provides a convenient common grounding location for 2 wrist straps. Mounts to any flat, rigid surface. Ground cords are included with static dissipative tops and shelves, but can be ordered separately. PART NO. GB GCT GCS Outlet Strips Shelf ground • ● DESCRIPTION ground block ground cord for top ground cord for shelf Static Dissipative Plastic Laminate Top See page 73. Static Dissipative Plastic Insert Boxes See page 119. Static Dissipative Paint See back cover for paint colors available with ESD properties. Adjustable Support Bracket This support bracket, which must be ordered separately, provides additional support for heavy loads. PART NO. ARS-BR 78 79 The bench components on these Instrument Riser Shelf Rear Panels two pages allow you to customize above the worksurface for your particular needs. All parts must be ordered separately to match the length of the workbench top you have chosen. Backstops PART NO. TBS-48 TBS-60 TBS-72 TBS-84 TBS-96 TOP LENGTH 48" 60" 72" 84" 96" Backstop and Endstop Sets PART NO. BES-48 BES-60 BES-72 BES-84 BES-96 TOP LENGTH 48" 60" 72" 84" 96" Stationary Riser Shelves Made of steel to support heavy loads. Shelf is 10 1⁄ 2" deep x 13 1⁄ 2" high. Optional full rear panel (shown above) extends from benchtop to form back panel and backstop for shelf (part number ending in -2). Contact Lista for other sizes. Open Riser Shelves open shelf (open back, no shelf backstop) PART NO. SRS48 SRS60 SRS72 SRS84 SRS96 TOP LENGTH 48" 60" 72" 84" 96" Open Riser Shelves with Shelf Backstop shelf with backstop (open back) PART NO. SRS48-1 SRS60-1 SRS72-1 SRS84-1 SRS96-1 TOP LENGTH 48" 60" 72" 84" 96" Riser Shelves with Full Panel (Shown) closed back, with shelf backstop PART NO. SRS48-2 SRS60-2 SRS72-2 SRS84-2 SRS96-2 ES TOP LENGTH 48" 60" 72" 84" 96" any DESCRIPTION riser shelf riser shelf riser shelf riser shelf riser shelf endstops (pair) Adjustable Riser Shelf Assemblies Shelves measure 1 1⁄ 4" thick x 12" deep, available in laminated gray plastic, static dissipative white plastic or maple. Shelf can be adjusted in 1 1⁄ 2" increments from a low of 12" to an overall height of 18". A separate steel backstop with rounded corners is available for the shelf. Includes the number of adjustable support brackets shown in the charts. Plastic Adjustable Riser Shelf Assembly PART NO. ARS48P ARS60P ARS72P ARS84P ARS96P TOP LENGTH 48" 60" 72" 84" 96" SUPPORTS 2 2 2 3 3 Static Dissipative Adjustable Riser Shelf Assembly* PART NO. TOP LENGTH SUPPORTS ARS48SD 48" 2 ARS60SD 60" 2 ARS72SD 72" 2 ARS84SD 84" 3 ARS96SD 96" 3 *See page 73 for static dissipative specifications. Comes with grounding bolt and grounding cord. Maple Adjustable Riser Shelf Assembly PART NO. ARS48M ARS60M ARS72M ARS84M ARS96M TOP LENGTH 48" 60" 72" 84" 96" SUPPORTS 2 2 2 2 3 Riser Shelf Backstops (For Adjustable and Instruments Risers) Made of steel with rounded edges for safety. Stops extend approximately 3" above the shelf surface. PART NO. ARSBS-48 ARSBS-60 ARSBS-72 ARSBS-84 ARSBS-96 TOP LENGTH 48" 60" 72" 84" 96" AVAIL A ESD Accessories Full rear panel extends from benchtop to form back panel between the worksurface and riser shelf, flush with the shelf. Also available with a 2" backstop for the riser shelf. To order a backstop for an instrument riser shelf without rear panel, see the chart on page 78. Backstops and Endstops Made of steel with rounded edges for safety. Stops extend approximately 3" above the workbench top. D E BL ES Workbench Above-Worksurface Accessories Instrument Riser Shelf Supports Instrument Riser Shelves Either 16", 20" or 24" high, channel-front with smooth finished corners and removable side panels. 20" and 24" models provide extra space to run air lines or meet additional power requirements. Ordered individually. All shelves measure 1 1⁄ 4" thick x 12" or 15" deep and mount to shelf supports. Add “12” or “15” in place of the red box in the part number to specify a shelf depth of 12" or 15" Backstops for instrument riser shelves can be ordered from the chart on page 78. 16" Instrument Riser Shelf Supports PART NO. IRSS16 IRSS16/15 IRSS16/20 IRSS16/GF-15 HEIGHT 16" 16" 16" 16" DESCRIPTION no power with 15 amp with 20 amp with 15 amp GFCI 20" Instrument Riser Shelf Supports PART NO. IRSS20 IRSS20/15 IRSS20/20 IRSS20/GF-15 HEIGHT 20" 20" 20" 20" DESCRIPTION no power with 15 amp with 20 amp with15 amp GFCI 24" Instrument Riser Shelf Supports PART NO. IRSS24 IRSS24/15 IRSS24/20 IRSS24/GF-15 HEIGHT 24" 24" 24" 24" DESCRIPTION no power with 15 amp with 20 amp with15 amp GFCI Static Dissipative Instrument Riser Shelves* PART NO. LENGTH FINISH SD48 ■ 48" white laminate SD60 ■ 60" white laminate SD72 ■ 72" white laminate SD84 ■ ** 84" white laminate SD96 ■ ** 96" white laminate * See page 73 for static dissipative specifications. Comes with grounding bolt and grounding cord. ** Lista recommends using a center support with 84" and 96" shelves Plastic Laminate Instrument Riser Shelves PART NO. LENGTH FINISH PS48 ■ 48" gray laminate PS60 ■ 60" gray laminate PS72 ■ 72" gray laminate PS84 ■ * 84" gray laminate PS96 ■ * 96" gray laminate * Lista recommends using a center support with 84" and 96" shelves Maple Instrument Riser Shelves PART NO. LENGTH FINISH MS48 ■ 48" maple MS60 ■ 60" maple MS72 ■ 72" maple MS84 ■ * 84" maple MS96 ■ * 96" maple * Lista recommends using a center support with 84" and 96" shelves Rear Panel Wrist Strap and Cord PART NO. TOP LENGTH 48" 48" 48" 60" 60" 60" 72" 72" 72" IRS-FRP4816 IRS-FRP4820 IRS-FRP4824 IRS-FRP6016 IRS-FRP6020 IRS-FRP6024 IRS-FRP7216 IRS-FRP7220 IRS-FRP7224 SHELF SUPPORT HEIGHT 16" 20" 24" 16" 20" 24" 16" 20" 24" 3M Charge-Guard ® adjustable wrist strap with 5' coiled cord. PART NO. WS DESCRIPTION wrist strap and cord ■ Rear Panel with 2" Backstop PART NO. TOP LENGTH 48" 48" 48" 60" 60" 60" 72" 72" 72" IRS-FRP4816-2 IRS-FRP4820-2 IRS-FRP4824-2 IRS-FRP6016-2 IRS-FRP6020-2 IRS-FRP6024-2 IRS-FRP7216-2 IRS-FRP7220-2 IRS-FRP7224-2 • SHELF SUPPORT HEIGHT 16" 20" 24" 16" 20" 24" 16" 20" 24" Available in 15 amp or 20 amp, and GFCI. Lighted on/off switch, 6' cord with grounded plug and circuit breaker. 110V. PART NO. EOP15-15 EOP15-20 EOP15-GF-15 EOP-48 DESCRIP. 15 amp 20 amp GFCI-15 amp 15 amp OUTLETS 6 6 6 8 LGTH. 15" 15" 15" 48" ■ ■ ■ ■ ■ ■ Wrist strap • • Ground block Common ground • To earth ground Ground Block and Cord Ground block provides a convenient common grounding location for 2 wrist straps. Mounts to any flat, rigid surface. Ground cords are included with static dissipative tops and shelves, but can be ordered separately. PART NO. GB GCT GCS Outlet Strips Shelf ground • ● DESCRIPTION ground block ground cord for top ground cord for shelf Static Dissipative Plastic Laminate Top See page 73. Static Dissipative Plastic Insert Boxes See page 119. Static Dissipative Paint See back cover for paint colors available with ESD properties. Adjustable Support Bracket This support bracket, which must be ordered separately, provides additional support for heavy loads. PART NO. ARS-BR 78 79 Industrial Easy-Order Workbench Combinations All workbench tops have a standard square edge and are 30" deep. Workbenches with No AboveWorksurface Accessories Workbenches with Backstop and Endstops Workbench components shown in gray in the illustrations do not come with the workbench and must be ordered separately. To choose Easy-Order cabinet pedestals, see page 12 for Narrow Width cabinets and page 14 for MP Width cabinets, or see page 81 for frequently ordered cabinet pedestals. For hanging cabinets, see page 81. Series WB5_ and WS10_ benches have Lista Legs. The height of the legs of WB5_ and WS10_ benches is 33 1⁄ 2". The height of the legs of WB6_ and WS11_ benches is 35 1⁄ 2". Workbenches with Stationary Riser Shelf Workbenches with Adjustable Riser Shelf Riser shelf includes backstop and full rear panel. Workbench includes endstops. Top and riser shelf include backstop. Workbench includes endstops. The cabinets below provide convenient belowworksurface storage where less than a full cabinet pedestal is needed. PART NO. WB50- ■ - ■ DOES NOT INCLUDE optional hanging cabinet stringer PART NO. WB51- ■ - ■ DOES NOT INCLUDE optional hanging cabinet stringer PART NO. WB52- ■ - ■ DOES NOT INCLUDE optional hanging cabinet stringer PART NO. WB53- ■ - ■ DOES NOT INCLUDE optional hanging cabinet stringer How to order an Industrial Easy-Order Workbench 1. Select top length (box ■). 60 = 60" length 72 = 72" length 96 = 96" length 2. Select top style (box ■). L S P M = = = = PART NO. WS100- ■ - ■ DOES NOT INCLUDE cabinet pedestal PART NO. WS101- ■ - ■ DOES NOT INCLUDE cabinet pedestal PART NO. WS102- ■ - ■ DOES NOT INCLUDE cabinet pedestal PART NO. WS103- ■ - ■ DOES NOT INCLUDE cabinet pedestal Lista Top Steel top Plastic top Maple top See page 73 for workbench top descriptions. 3. Select cabinets (where applicable). See pages 42-43 for cabinet ordering information. 4. Select color(s) for workbench components (see back cover for color chart). EXAMPLE: to order a WS101 workbench with a 72" plastic top, and an NW600-2A-I cabinet pedestal with a Bright Blue cabinet housing and Pearl Gray drawers, the workbench part number would be WS101-72-P , the cabinet part number would be NW600-2A-I, and the paint color codes would be “BB” for the workbench components and cabinet housing, and “PG” for the drawer fronts. Workbench Hanging Cabinets Workbench Pedestals The Easy-Order MP Width cabinets below are among our most popular as below-worksurface storage for workbenches. All are 33 1⁄ 2" high x 22 3 ⁄ 16" wide x 28 1⁄ 2" deep. See the column to the right for ordering instructions. For additional choices of Easy-Order cabinet pedestals, see page 12 for Narrow Width cabinets and page 14 for MP Width cabinets. Single Drawer All Narrow Width (NW) units are 16 7⁄ 8" wide x 28 1⁄ 2" deep. All MP Width units are 22 3 ⁄ 16" wide x 28 1⁄ 2" deep. Each unit is suspended from the workbench top, and comes with an individual lock and 2 keys. PART NO. HC/NW50-WB HC/NW75-WB HC/NW100-WB HC/NW150-WB HC/NW300FFH-WB HC/MP50-WB HC/MP75-WB HC/MP100-WB HC/MP150-WB DRAWER HEIGHT 1 3 ⁄ 8" 2 3 ⁄ 8" 3 3 ⁄ 8" 5 1⁄ 4" 11" 1 3 ⁄ 8" 2 3 ⁄ 8" 3 3 ⁄ 8" 5 1⁄ 4" DRAWER INTERIOR 75N 75N 100N 150N 510 018 316 209 200N 104 6" BASE PART NO. MP600-2- ■ MP600-2A - ■ DRAWERS COMPARTS. 5 5 57 DRAWER INTERIOR 100N 150N 316 209 150N 104 200N 104 6" BASE PART NO. MP600-3- ■ MP600-3A- ■ Hanging Cabinets These hanging cabinets are available either with or without drawer interior sets. See column to far right for ordering instructions. DRAWERS COMPARTS. 4 4 33 INCLUDES INTERIOR 150N 104 450 DOOR BOTTOM SHELF PART NO. WS200- ■ - ■ DOES NOT INCLUDE cabinet pedestals PART NO. WS201- ■ - ■ DOES NOT INCLUDE cabinet pedestals PART NO. WS202- ■ - ■ DOES NOT INCLUDE cabinet pedestals PART NO. WS203- ■ - ■ DOES NOT INCLUDE cabinet pedestals 6" BASE DRAWER INTERIOR 75N 100N 125N 510 209 104 PART NO. MP600-19- ■ MP600-19A - ■ 15 3 ⁄4" overall height PART NO. DRAWERS COMPARTS. MP300-2- ■ 3 MP300-2A- ■ 3 23 PART NO. WB60- ■ - ■ DOES NOT INCLUDE optional hanging cabinet PART NO. WB61- ■ - ■ DOES NOT INCLUDE optional hanging cabinet PART NO. WB62- ■ - ■ DOES NOT INCLUDE optional hanging cabinet PART NO. WB63- ■ - ■ DOES NOT INCLUDE optional hanging cabinet DRAWER INTERIOR 100N 200N 209 104 15 3 ⁄4" overall height PART NO. DRAWERS COMPARTS. MP300-3- ■ 2 MP300-3A- ■ 2 13 How to order Easy-Order Cabinets The 2 columns to the right of each cabinet illustration indicate drawer heights and drawer interior sets. (For drawer capacities and sizes, see page 11.) Below the illustration, you will find part numbers, the number of drawers, and the number of drawer compartments created by the interior sets (shown on page 15). 1. Select Easy-Order Cabinet Combination either with or without drawer interior sets. An “A” at the end of the part number (i.e., MP600-2A) designates that the cabinet comes with drawer interior sets (shown on page 15). 2. Select lock type (box ■). For lock options see page 42. N I K M = = = = none individual keyed-alike master 3. Select color(s) for housing and drawer fronts (see page 43 for color chart). EXAMPLE: to order an MP600-2A cabinet with an individual lock, and a Bright Blue cabinet housing and Pearl Gray drawers, the part number would be MP600-2A-I , and the paint color codes would be “BB” for the housing and “PG” for the drawer fronts. DRAWERS COMPARTS. 1 1 4 DRAWER INTERIOR 75N 75N 100N 150N 028 316 209 209 150N 104 200N 104 PART NO. MP750-2- ■ MP750-2A - ■ DRAWERS COMPARTS. 6 6 70 INCLUDES INTERIOR 150N 104 600 DOOR ADJUSTABLE SHELF BOTTOM SHELF 80 PART NO. DOES NOT INCLUDE WS110- ■ - ■ cabinet pedestal* *use MP600 housing without base PART NO. DOES NOT INCLUDE WS111- ■ - ■ cabinet pedestal* *use MP600 housing without base PART NO. DOES NOT INCLUDE WS112- ■ - ■ cabinet pedestal* *use MP600 housing without base PART NO. DOES NOT INCLUDE WS113- ■ - ■ cabinet pedestal* *use MP600 housing without base PART NO. MP750-19- ■ MP750-19A - ■ DRAWERS COMPARTS. 1 1 4 81 Industrial Easy-Order Workbench Combinations All workbench tops have a standard square edge and are 30" deep. Workbenches with No AboveWorksurface Accessories Workbenches with Backstop and Endstops Workbench components shown in gray in the illustrations do not come with the workbench and must be ordered separately. To choose Easy-Order cabinet pedestals, see page 12 for Narrow Width cabinets and page 14 for MP Width cabinets, or see page 81 for frequently ordered cabinet pedestals. For hanging cabinets, see page 81. Series WB5_ and WS10_ benches have Lista Legs. The height of the legs of WB5_ and WS10_ benches is 33 1⁄ 2". The height of the legs of WB6_ and WS11_ benches is 35 1⁄ 2". Workbenches with Stationary Riser Shelf Workbenches with Adjustable Riser Shelf Riser shelf includes backstop and full rear panel. Workbench includes endstops. Top and riser shelf include backstop. Workbench includes endstops. The cabinets below provide convenient belowworksurface storage where less than a full cabinet pedestal is needed. PART NO. WB50- ■ - ■ DOES NOT INCLUDE optional hanging cabinet stringer PART NO. WB51- ■ - ■ DOES NOT INCLUDE optional hanging cabinet stringer PART NO. WB52- ■ - ■ DOES NOT INCLUDE optional hanging cabinet stringer PART NO. WB53- ■ - ■ DOES NOT INCLUDE optional hanging cabinet stringer How to order an Industrial Easy-Order Workbench 1. Select top length (box ■). 60 = 60" length 72 = 72" length 96 = 96" length 2. Select top style (box ■). L S P M = = = = PART NO. WS100- ■ - ■ DOES NOT INCLUDE cabinet pedestal PART NO. WS101- ■ - ■ DOES NOT INCLUDE cabinet pedestal PART NO. WS102- ■ - ■ DOES NOT INCLUDE cabinet pedestal PART NO. WS103- ■ - ■ DOES NOT INCLUDE cabinet pedestal Lista Top Steel top Plastic top Maple top See page 73 for workbench top descriptions. 3. Select cabinets (where applicable). See pages 42-43 for cabinet ordering information. 4. Select color(s) for workbench components (see back cover for color chart). EXAMPLE: to order a WS101 workbench with a 72" plastic top, and an NW600-2A-I cabinet pedestal with a Bright Blue cabinet housing and Pearl Gray drawers, the workbench part number would be WS101-72-P , the cabinet part number would be NW600-2A-I, and the paint color codes would be “BB” for the workbench components and cabinet housing, and “PG” for the drawer fronts. Workbench Hanging Cabinets Workbench Pedestals The Easy-Order MP Width cabinets below are among our most popular as below-worksurface storage for workbenches. All are 33 1⁄ 2" high x 22 3 ⁄ 16" wide x 28 1⁄ 2" deep. See the column to the right for ordering instructions. For additional choices of Easy-Order cabinet pedestals, see page 12 for Narrow Width cabinets and page 14 for MP Width cabinets. Single Drawer All Narrow Width (NW) units are 16 7⁄ 8" wide x 28 1⁄ 2" deep. All MP Width units are 22 3 ⁄ 16" wide x 28 1⁄ 2" deep. Each unit is suspended from the workbench top, and comes with an individual lock and 2 keys. PART NO. HC/NW50-WB HC/NW75-WB HC/NW100-WB HC/NW150-WB HC/NW300FFH-WB HC/MP50-WB HC/MP75-WB HC/MP100-WB HC/MP150-WB DRAWER HEIGHT 1 3 ⁄ 8" 2 3 ⁄ 8" 3 3 ⁄ 8" 5 1⁄ 4" 11" 1 3 ⁄ 8" 2 3 ⁄ 8" 3 3 ⁄ 8" 5 1⁄ 4" DRAWER INTERIOR 75N 75N 100N 150N 510 018 316 209 200N 104 6" BASE PART NO. MP600-2- ■ MP600-2A - ■ DRAWERS COMPARTS. 5 5 57 DRAWER INTERIOR 100N 150N 316 209 150N 104 200N 104 6" BASE PART NO. MP600-3- ■ MP600-3A- ■ Hanging Cabinets These hanging cabinets are available either with or without drawer interior sets. See column to far right for ordering instructions. DRAWERS COMPARTS. 4 4 33 INCLUDES INTERIOR 150N 104 450 DOOR BOTTOM SHELF PART NO. WS200- ■ - ■ DOES NOT INCLUDE cabinet pedestals PART NO. WS201- ■ - ■ DOES NOT INCLUDE cabinet pedestals PART NO. WS202- ■ - ■ DOES NOT INCLUDE cabinet pedestals PART NO. WS203- ■ - ■ DOES NOT INCLUDE cabinet pedestals 6" BASE DRAWER INTERIOR 75N 100N 125N 510 209 104 PART NO. MP600-19- ■ MP600-19A - ■ 15 3 ⁄4" overall height PART NO. DRAWERS COMPARTS. MP300-2- ■ 3 MP300-2A- ■ 3 23 PART NO. WB60- ■ - ■ DOES NOT INCLUDE optional hanging cabinet PART NO. WB61- ■ - ■ DOES NOT INCLUDE optional hanging cabinet PART NO. WB62- ■ - ■ DOES NOT INCLUDE optional hanging cabinet PART NO. WB63- ■ - ■ DOES NOT INCLUDE optional hanging cabinet DRAWER INTERIOR 100N 200N 209 104 15 3 ⁄4" overall height PART NO. DRAWERS COMPARTS. MP300-3- ■ 2 MP300-3A- ■ 2 13 How to order Easy-Order Cabinets The 2 columns to the right of each cabinet illustration indicate drawer heights and drawer interior sets. (For drawer capacities and sizes, see page 11.) Below the illustration, you will find part numbers, the number of drawers, and the number of drawer compartments created by the interior sets (shown on page 15). 1. Select Easy-Order Cabinet Combination either with or without drawer interior sets. An “A” at the end of the part number (i.e., MP600-2A) designates that the cabinet comes with drawer interior sets (shown on page 15). 2. Select lock type (box ■). For lock options see page 42. N I K M = = = = none individual keyed-alike master 3. Select color(s) for housing and drawer fronts (see page 43 for color chart). EXAMPLE: to order an MP600-2A cabinet with an individual lock, and a Bright Blue cabinet housing and Pearl Gray drawers, the part number would be MP600-2A-I , and the paint color codes would be “BB” for the housing and “PG” for the drawer fronts. DRAWERS COMPARTS. 1 1 4 DRAWER INTERIOR 75N 75N 100N 150N 028 316 209 209 150N 104 200N 104 PART NO. MP750-2- ■ MP750-2A - ■ DRAWERS COMPARTS. 6 6 70 INCLUDES INTERIOR 150N 104 600 DOOR ADJUSTABLE SHELF BOTTOM SHELF 80 PART NO. DOES NOT INCLUDE WS110- ■ - ■ cabinet pedestal* *use MP600 housing without base PART NO. DOES NOT INCLUDE WS111- ■ - ■ cabinet pedestal* *use MP600 housing without base PART NO. DOES NOT INCLUDE WS112- ■ - ■ cabinet pedestal* *use MP600 housing without base PART NO. DOES NOT INCLUDE WS113- ■ - ■ cabinet pedestal* *use MP600 housing without base PART NO. MP750-19- ■ MP750-19A - ■ DRAWERS COMPARTS. 1 1 4 81 Technical Easy-Order Workbench Combinations All workbench tops have a radius/ bullnose front edge and are 30" deep. Workbenches with Backstop Workbench components shown in gray in the illustrations do not come with the workbench and must be ordered separately. To choose Easy-Order cabinet pedestals, see page 12 for Narrow Width cabinets and page 14 for MP Width cabinets, or see page 81 for frequently ordered cabinet pedestals. For hanging cabinets, see page 81. Workbenches with Instrument Riser Shelf Workbenches with 30" High FlexWorks® Accessory System Workbenches with 48" High FlexWorks Accessory System Workbench and riser shelf include backstops. Workbench includes a backstop, a riser shelf backstop and a 15 amp, 6-outlet power strip. Instrument risers are 16" high. Riser shelf is 12" deep. Includes 30" starter frame, 30" adder frame, (2) 12" shelves, plastic box rail, backstop, vertical power strip and markerboard/ tackboard. Includes 48" starter frame, 48" adder frame, (2) 12" shelves, (1) 15" shelf, backstop, horizontal power strip, markerboard/tackboard and louvered panel. ■ ■ ■ ■ ■ ■ DOES NOT INCLUDE optional hanging cabinet PART NO. TWB012- ■ - ■ ■ PART NO. DOES NOT INCLUDE TWB013- ■ - ■ optional hanging cabinet FlexWorks Accessory System is surface mounted PART NO. DOES NOT INCLUDE TWB213- ■ *- ■ cabinet pedestals FlexWorks Accessory System is surface mounted * 48" top not recommended ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ------------------------------------------------------------------------------------------- ■ ■ ■ ■ ■ ■ PART NO. TWB011- ■ - ■ ■ ------------------------------------------------------------------------------------------- ■ DOES NOT INCLUDE optional hanging cabinet ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ PART NO. TWB010- ■ - ■ ■ ■ ■ ■ ■ ■ ■ Series TWB01_ and TWB11_ benches have technical legs. Series TWB31_ benches include a Height-Right ® electrically-powered base (see pages 76-77 for further details). The height of the legs of TWB01_ and TWB11_ benches is 33 1⁄ 2". Workbenches with Adjustable Riser Shelf DOES NOT INCLUDE optional hanging cabinet How to order a Technical Easy-Order Workbench 1. Select top length (box ■). ■ ■ ■ ■ ■ ■ 48 = 48" length 60 = 60" length 72 = 72" length PART NO. DOES NOT INCLUDE TWB014- ■ - ■ optional hanging cabinet FlexWorks Accessory System is surface mounted PART NO. DOES NOT INCLUDE TWB214- ■ *- ■ cabinet pedestals FlexWorks Accessory System is surface mounted * 48" top not recommended 2. Select top style (box ■). P = Plastic top M = Maple top E = ESD DOES NOT INCLUDE cabinet pedestal DOES NOT INCLUDE cabinet pedestal PART NO. TWB112- ■ - ■ DOES NOT INCLUDE cabinet pedestal PART NO. DOES NOT INCLUDE TWB210- ■ *- ■ cabinet pedestals * 48" top not recommended PART NO. DOES NOT INCLUDE TWB211- ■ *- ■ cabinet pedestals * 48" top not recommended PART NO. DOES NOT INCLUDE TWB212- ■ *- ■ cabinet pedestals * 48" top not recommended PART NO. TWB313- ■ - ■ FlexWorks Accessory System is rear mounted features Height-Right ® adjustable base PART NO. DOES NOT INCLUDE TWB114- ■ - ■ cabinet pedestal FlexWorks Accessory System is surface mounted ------------------------------------------------------------------------------------------- ■ ■ ■ ■ ■ ■ PART NO. DOES NOT INCLUDE TWB113- ■ - ■ cabinet pedestal FlexWorks Accessory System is surface mounted ------------------------------------------------------------------------------------------- ■ ■ ■ ■ ■ ■ ■ PART NO. TWB314- ■ - ■ FlexWorks Accessory System is rear mounted features Height-Right adjustable base ■ ■ ■ ■ ■ ■ PART NO. TWB310- ■ - ■ features Height-Right adjustable base 82 PART NO. TWB111- ■ - ■ ■ ■ ■ ■ ■ ■ EXAMPLE: to order a TWB111workbench with a 72" plastic top, and an NW600-2A-I cabinet pedestal with a Bright Blue cabinet housing and Pearl Gray drawers, the workbench part number would be TWB111-72-P , the cabinet part number would be NW600-2A-I, and the paint color codes would be “BB” for the workbench components and cabinet housing, and “PG” for the drawer fronts. PART NO. TWB110- ■ - ■ ■ See page 73 for workbench top descriptions. 3. Select cabinets (where applicable). See pages 42-43 for cabinet ordering information. 4. Select color(s) for workbench components (see back cover for color chart). PART NO. TWB311- ■ - ■ features Height-Right adjustable base PART NO. TWB312- ■ - ■ features Height-Right adjustable base 83 Technical Easy-Order Workbench Combinations All workbench tops have a radius/ bullnose front edge and are 30" deep. Workbenches with Backstop Workbench components shown in gray in the illustrations do not come with the workbench and must be ordered separately. To choose Easy-Order cabinet pedestals, see page 12 for Narrow Width cabinets and page 14 for MP Width cabinets, or see page 81 for frequently ordered cabinet pedestals. For hanging cabinets, see page 81. Workbenches with Instrument Riser Shelf Workbenches with 30" High FlexWorks® Accessory System Workbenches with 48" High FlexWorks Accessory System Workbench and riser shelf include backstops. Workbench includes a backstop, a riser shelf backstop and a 15 amp, 6-outlet power strip. Instrument risers are 16" high. Riser shelf is 12" deep. Includes 30" starter frame, 30" adder frame, (2) 12" shelves, plastic box rail, backstop, vertical power strip and markerboard/ tackboard. Includes 48" starter frame, 48" adder frame, (2) 12" shelves, (1) 15" shelf, backstop, horizontal power strip, markerboard/tackboard and louvered panel. ■ ■ ■ ■ ■ ■ DOES NOT INCLUDE optional hanging cabinet PART NO. TWB012- ■ - ■ ■ PART NO. DOES NOT INCLUDE TWB013- ■ - ■ optional hanging cabinet FlexWorks Accessory System is surface mounted PART NO. DOES NOT INCLUDE TWB213- ■ *- ■ cabinet pedestals FlexWorks Accessory System is surface mounted * 48" top not recommended ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ------------------------------------------------------------------------------------------- ■ ■ ■ ■ ■ ■ PART NO. TWB011- ■ - ■ ■ ------------------------------------------------------------------------------------------- ■ DOES NOT INCLUDE optional hanging cabinet ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ PART NO. TWB010- ■ - ■ ■ ■ ■ ■ ■ ■ ■ Series TWB01_ and TWB11_ benches have technical legs. Series TWB31_ benches include a Height-Right ® electrically-powered base (see pages 76-77 for further details). The height of the legs of TWB01_ and TWB11_ benches is 33 1⁄ 2". Workbenches with Adjustable Riser Shelf DOES NOT INCLUDE optional hanging cabinet How to order a Technical Easy-Order Workbench 1. Select top length (box ■). ■ ■ ■ ■ ■ ■ 48 = 48" length 60 = 60" length 72 = 72" length PART NO. DOES NOT INCLUDE TWB014- ■ - ■ optional hanging cabinet FlexWorks Accessory System is surface mounted PART NO. DOES NOT INCLUDE TWB214- ■ *- ■ cabinet pedestals FlexWorks Accessory System is surface mounted * 48" top not recommended 2. Select top style (box ■). P = Plastic top M = Maple top E = ESD DOES NOT INCLUDE cabinet pedestal DOES NOT INCLUDE cabinet pedestal PART NO. TWB112- ■ - ■ DOES NOT INCLUDE cabinet pedestal PART NO. DOES NOT INCLUDE TWB210- ■ *- ■ cabinet pedestals * 48" top not recommended PART NO. DOES NOT INCLUDE TWB211- ■ *- ■ cabinet pedestals * 48" top not recommended PART NO. DOES NOT INCLUDE TWB212- ■ *- ■ cabinet pedestals * 48" top not recommended PART NO. TWB313- ■ - ■ FlexWorks Accessory System is rear mounted features Height-Right ® adjustable base PART NO. DOES NOT INCLUDE TWB114- ■ - ■ cabinet pedestal FlexWorks Accessory System is surface mounted ------------------------------------------------------------------------------------------- ■ ■ ■ ■ ■ ■ PART NO. DOES NOT INCLUDE TWB113- ■ - ■ cabinet pedestal FlexWorks Accessory System is surface mounted ------------------------------------------------------------------------------------------- ■ ■ ■ ■ ■ ■ ■ PART NO. TWB314- ■ - ■ FlexWorks Accessory System is rear mounted features Height-Right adjustable base ■ ■ ■ ■ ■ ■ PART NO. TWB310- ■ - ■ features Height-Right adjustable base 82 PART NO. TWB111- ■ - ■ ■ ■ ■ ■ ■ ■ EXAMPLE: to order a TWB111workbench with a 72" plastic top, and an NW600-2A-I cabinet pedestal with a Bright Blue cabinet housing and Pearl Gray drawers, the workbench part number would be TWB111-72-P , the cabinet part number would be NW600-2A-I, and the paint color codes would be “BB” for the workbench components and cabinet housing, and “PG” for the drawer fronts. PART NO. TWB110- ■ - ■ ■ See page 73 for workbench top descriptions. 3. Select cabinets (where applicable). See pages 42-43 for cabinet ordering information. 4. Select color(s) for workbench components (see back cover for color chart). PART NO. TWB311- ■ - ■ features Height-Right adjustable base PART NO. TWB312- ■ - ■ features Height-Right adjustable base 83 FlexWorks Accessory System ® Lista’s FlexWorks Accessory be adapted or expanded to meet System is highly functional and changing needs. It can also be flexible. It has been designed to retrofitted to any existing Lista cost-effectively meet the needs of workbench or other manufacturer’s a broad variety of jobs. workbench. Some FlexWorks com- The System has been ergonomi- specific tasks within a workshift. accessibility with no stretch or System width is limited only by strain, reducing the risk of injury your bench length. ➤ STARTER SECTION WIDTH ADDER SECTION WIDTH ➤➤ ➤ ESD paint for static sensitive appli- nents, the FlexWorks Accessory cations. Standard colors are shown System is modular and allows for on the back cover. A 48" high upright is required for benches with light fixtures and other overhead accessories. A 30" height is standard when no overhead accessories are required. 30" High Frame Starter Sets STARTER SECTION ADDER SECTION Available Widths of FlexWorks Systems The widths below represent measurements from frame center to frame center. Center posts are 1 7/8" wide. Inside usable width between posts for 27 length frames is 25 3/8", and for 33 length frames is 31 3/8". Overhead light fixture Tool rail Reversible markerboard/tackboard Adjustable shelf with shelf dividers Monitor shelf Louvered panel Horizontal power rail Large document holder 84 Frames FlexWorks starter frames consist of 2 upright posts and a universal top rail. Adder sets consist of an additional upright and the top rail. Frames are sturdy, heavy gauge steel, and are notched front and back at 1" increments for mounting shelves and accessories. Frames also feature threaded side holes at 4" increments for system accessories. All components are available in Like all Lista storage compo- easy reconfiguration. It can easily ® ponents can be easily adjusted for cally designed, providing for easy and increasing productivity. FlexWorks Frames Using 1 Section SECTION WIDTH (CENTER-TO-CENTER) 21 1/4" 27 1/4" 33 1/4" 39 1/4" 45 1/4" OVERALL WIDTH (FOOT-TO-FOOT) 24 3/4" 30 3/4" 36 3/4" 42 3/4" 48 3/4" MINIMUM BENCH TOP LENGTH 26 3/4" 32 3/4" 38 3/4" 44 3/4"" 50 3/4" Using 1 Starter and 1 Adder Section SECTION WIDTH (CENTER-TO-CENTER) 21 1/4" + 21 1/4" 21 1/4" + 27 1/4" 21 1/4" + 33 1/4" 21 1/4" + 39 1/4" 21 1/4" + 45 1/4" 27 1/4" + 27 1/4" 27 1/4" + 33 1/4" 27 1/4" + 39 1/4" 27 1/4" + 45 1/4" 33 1/4" + 33 1/4" 33 1/4" + 39 1/4" 33 1/4" + 45 1/4" 39 1/4" + 39 1/4" 39 1/4" + 45 1/4" 45 1/4" + 45 1/4" OVERALL WIDTH (FOOT-TO-FOOT) 46" 52" 58" 64" 70" 58" 64" 70" 76" 70" 76" 82" 82" 88" 94" MINIMUM BENCH TOP LENGTH 48" 54" 60" 66" 72" 60" 66" 72" 78" 72" 78" 84" 84" 90" 96" PART NO. WF2130 WF2730 WF3330 WF3930 WF4530 SEC. WIDTH CENT.-TO-CENT. 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" 30" High Frame Adder Sets PART NO. WF2130A WF2730A WF3330A WF3930A WF4530A SEC. WIDTH CENT.-TO-CENT. 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" 48" High Frame Starter Sets PART NO. WF2148 WF2748 WF3348 WF3948 WF4548 SEC. WIDTH CENT.-TO-CENT. 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" 48" High Frame Adder Sets PART NO. WF2148A WF2748A WF3348A WF3948A WF4548A SEC. WIDTH CENT.-TO-CENT. 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4 " 85 FlexWorks Accessory System ® Lista’s FlexWorks Accessory be adapted or expanded to meet System is highly functional and changing needs. It can also be flexible. It has been designed to retrofitted to any existing Lista cost-effectively meet the needs of workbench or other manufacturer’s a broad variety of jobs. workbench. Some FlexWorks com- The System has been ergonomi- specific tasks within a workshift. accessibility with no stretch or System width is limited only by strain, reducing the risk of injury your bench length. ➤ STARTER SECTION WIDTH ADDER SECTION WIDTH ➤➤ ➤ ESD paint for static sensitive appli- nents, the FlexWorks Accessory cations. Standard colors are shown System is modular and allows for on the back cover. A 48" high upright is required for benches with light fixtures and other overhead accessories. A 30" height is standard when no overhead accessories are required. 30" High Frame Starter Sets STARTER SECTION ADDER SECTION Available Widths of FlexWorks Systems The widths below represent measurements from frame center to frame center. Center posts are 1 7/8" wide. Inside usable width between posts for 27 length frames is 25 3/8", and for 33 length frames is 31 3/8". Overhead light fixture Tool rail Reversible markerboard/tackboard Adjustable shelf with shelf dividers Monitor shelf Louvered panel Horizontal power rail Large document holder 84 Frames FlexWorks starter frames consist of 2 upright posts and a universal top rail. Adder sets consist of an additional upright and the top rail. Frames are sturdy, heavy gauge steel, and are notched front and back at 1" increments for mounting shelves and accessories. Frames also feature threaded side holes at 4" increments for system accessories. All components are available in Like all Lista storage compo- easy reconfiguration. It can easily ® ponents can be easily adjusted for cally designed, providing for easy and increasing productivity. FlexWorks Frames Using 1 Section SECTION WIDTH (CENTER-TO-CENTER) 21 1/4" 27 1/4" 33 1/4" 39 1/4" 45 1/4" OVERALL WIDTH (FOOT-TO-FOOT) 24 3/4" 30 3/4" 36 3/4" 42 3/4" 48 3/4" MINIMUM BENCH TOP LENGTH 26 3/4" 32 3/4" 38 3/4" 44 3/4"" 50 3/4" Using 1 Starter and 1 Adder Section SECTION WIDTH (CENTER-TO-CENTER) 21 1/4" + 21 1/4" 21 1/4" + 27 1/4" 21 1/4" + 33 1/4" 21 1/4" + 39 1/4" 21 1/4" + 45 1/4" 27 1/4" + 27 1/4" 27 1/4" + 33 1/4" 27 1/4" + 39 1/4" 27 1/4" + 45 1/4" 33 1/4" + 33 1/4" 33 1/4" + 39 1/4" 33 1/4" + 45 1/4" 39 1/4" + 39 1/4" 39 1/4" + 45 1/4" 45 1/4" + 45 1/4" OVERALL WIDTH (FOOT-TO-FOOT) 46" 52" 58" 64" 70" 58" 64" 70" 76" 70" 76" 82" 82" 88" 94" MINIMUM BENCH TOP LENGTH 48" 54" 60" 66" 72" 60" 66" 72" 78" 72" 78" 84" 84" 90" 96" PART NO. WF2130 WF2730 WF3330 WF3930 WF4530 SEC. WIDTH CENT.-TO-CENT. 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" 30" High Frame Adder Sets PART NO. WF2130A WF2730A WF3330A WF3930A WF4530A SEC. WIDTH CENT.-TO-CENT. 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" 48" High Frame Starter Sets PART NO. WF2148 WF2748 WF3348 WF3948 WF4548 SEC. WIDTH CENT.-TO-CENT. 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" 48" High Frame Adder Sets PART NO. WF2148A WF2748A WF3348A WF3948A WF4548A SEC. WIDTH CENT.-TO-CENT. 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4 " 85 FlexWorks Accessory Shelves and Plastic Box Rails FlexWorks Accessory Overhead Lights, Tool Rails and Power Strips ® ® Shelves, plastic box rails, Vertical Power Strips markerboard/tackboards, utility rails, tool rails, backstops, overhead cabinets and back panels must match the width of your chosen frame (see pages 86-89). The first 2 digits in the part numbers of these accessories describe the section width. EXAMPLE: plastic box rail WR33 should be used with a frame that has a 33 1 ⁄ 4" section width. Adjustable Shelves Variable Angle Shelves Adjustable, heavy gauge steel shelves can be mounted parallel to the benchtop or at a 15° angle for easy, ergonomic access. Shelves are reversible, with the lip either at the front, or at the rear to act as a backstop. Center mounting shelf is 18" deep, and is mounted between uprights. The shelf adjusts from totally flat to a 15° angle and has a capacity of 150 lbs. Includes ribbed mat. Attaching the shelves requires no special tools, so they can easily be switched from shift to shift and task to task. Supports are attached through a simple double-notch system (support brackets insert into slots on the uprights). PART NO. WS2112 WS2712 WS3312 WS3912 WS4512 WS2115 WS2715 WS3315 WS3915 WS4515 SHELF WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" SHELF DEPTH 12" 12" 12" 12" 12" 15" 15" 15" 15" 15" Ribbed Shelf Mats Ribbed mats provide added protection for tools and instruments. PART NO. RMAT-WS2112 RMAT-WS2115 RMAT-WS2118 RMAT-WS2712 RMAT-WS2715 RMAT-WS2718 RMAT-WS3312 RMAT-WS3315 RMAT-WS3912 RMAT-WS3915 RMAT-WS4512 RMAT-WS4515 RMAT-WS4518 86 USE WITH SHELF PART NO. WS2112 WS2115 WS2118 WS2712 WS2715 WS2718 WS3312 WS3315 WS3912 WS3915 WS4512 WS4515 WS4518 PART NO. WS2118A WS2718A WS3318A WS3918A WS4518A USE WITH SECTION WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" Shelf Dividers Steel dividers fit over the edge of adjustable shelf when shelf is mounted parallel and the lip is in the back. Painted to match shelf. PART NO. WSVSD100/12-L WSVSD100/12-R WSVSD150/12-L WSVSD150/12-R WSVSD200/12-L WSVSD200/12-R WSVSD100/15-L WSVSD100/15-R WSVSD150/15-L WSVSD150/15-R WSVSD200/15-L WSVSD200/15-R HEIGHT 4" 4" 6" 6" 8" 8" 4" 4" 6" 6" 8" 8" Overhead Light Fixtures Plastic Box Rails The plastic box rail is easily adjustable for ergonomic access. It can be mounted parallel to your benchtop or at a 15° angle. The PB Rail is attached via the same simple doublenotch system as adjustable shelves. It can hold selected Lista or other boxes that have hanger lips at the rear for attaching to a louvered panel. Plastic boxes are found on page 119. PART NO. WIDTH WR21 WR27 WR33 WR39 WR45 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" MAXIMUM # OF 3" BOXES/RAIL 7 9 11 13 15 48" long 3-tube fluorescent fixture tilts up or down 15°. Brackets allow light fixture to be mounted to frames 22" to 90" wide. Includes switch and 8' grounded electrical cord. Requires support brackets. PART NO. OHL/48 OHL/48-1 OHL/48-2 OHL/TR-BRK WIDTH 48" 48" 48" DESCRIPTION light only for FlexWorks 22" to 48" for FlexWorks 49" to 90" pair of support brackets Mounts vertically to either inside or outside of upright. Bracket and hardware supplied. Available in 15 amp or 20 amp, and GFCI. Lighted on/off switch, 6' cord with grounded plug and circuit breaker are standard. PART NO. EOP15-15/KIT EOP15-20/KIT EOP15-GF/KIT DESCRIPTION 15 amp with 6 outlets 20 amp with 6 outlets 15 amp GFCI with 6 outlets Horizontal Power/Utility Rails Tool Rails Support Brackets The tool rail spans the length of the benchtop. It is available in 48", 60" or 72" lengths. Each tool rail has a 30 lb. capacity, and comes complete with a trolley, 2 hangers, 2 endstops and 2 end caps in black finish. Balancer not included. Requires support brackets. A pair of support brackets is required for mounting overhead light and tool rail. Brackets can support both light and up to 2 tool rails. PART NO. TR48 TR60 TR72 PART NO. OHL/TR-BRK DESCRIPTION pair of support brackets LENGTH 48" 60" 72" Self-contained, 6-plug electrical outlet strip with 6' cord, mounts into holes on insides of uprights. Power rail pivots on axis, providing full horizontal adjustability. 110V, 15 amp circuit breaker, UL and CSA approved. Contact Lista for other power options. PART NO. WU21P WU27P WU33P WU39P WU45P SECTION WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" Airhose Attachment Swing Arm Tool Rail The swing arm tool rail is available in one 36" length and swings 180°. It has a 30 lb. capacity and includes a trolley, 1 endstop and 1 end cap. Balancer not included. Does not require support bracket. PART NO. SWT36 Small bracket bolts to inside or outside of upright. Quick-connect fitting not supplied. PART NO. BKA DESCRIPTION bracket for air supply LENGTH 36" 87 FlexWorks Accessory Shelves and Plastic Box Rails FlexWorks Accessory Overhead Lights, Tool Rails and Power Strips ® ® Shelves, plastic box rails, Vertical Power Strips markerboard/tackboards, utility rails, tool rails, backstops, overhead cabinets and back panels must match the width of your chosen frame (see pages 86-89). The first 2 digits in the part numbers of these accessories describe the section width. EXAMPLE: plastic box rail WR33 should be used with a frame that has a 33 1 ⁄ 4" section width. Adjustable Shelves Variable Angle Shelves Adjustable, heavy gauge steel shelves can be mounted parallel to the benchtop or at a 15° angle for easy, ergonomic access. Shelves are reversible, with the lip either at the front, or at the rear to act as a backstop. Center mounting shelf is 18" deep, and is mounted between uprights. The shelf adjusts from totally flat to a 15° angle and has a capacity of 150 lbs. Includes ribbed mat. Attaching the shelves requires no special tools, so they can easily be switched from shift to shift and task to task. Supports are attached through a simple double-notch system (support brackets insert into slots on the uprights). PART NO. WS2112 WS2712 WS3312 WS3912 WS4512 WS2115 WS2715 WS3315 WS3915 WS4515 SHELF WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" SHELF DEPTH 12" 12" 12" 12" 12" 15" 15" 15" 15" 15" Ribbed Shelf Mats Ribbed mats provide added protection for tools and instruments. PART NO. RMAT-WS2112 RMAT-WS2115 RMAT-WS2118 RMAT-WS2712 RMAT-WS2715 RMAT-WS2718 RMAT-WS3312 RMAT-WS3315 RMAT-WS3912 RMAT-WS3915 RMAT-WS4512 RMAT-WS4515 RMAT-WS4518 86 USE WITH SHELF PART NO. WS2112 WS2115 WS2118 WS2712 WS2715 WS2718 WS3312 WS3315 WS3912 WS3915 WS4512 WS4515 WS4518 PART NO. WS2118A WS2718A WS3318A WS3918A WS4518A USE WITH SECTION WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" Shelf Dividers Steel dividers fit over the edge of adjustable shelf when shelf is mounted parallel and the lip is in the back. Painted to match shelf. PART NO. WSVSD100/12-L WSVSD100/12-R WSVSD150/12-L WSVSD150/12-R WSVSD200/12-L WSVSD200/12-R WSVSD100/15-L WSVSD100/15-R WSVSD150/15-L WSVSD150/15-R WSVSD200/15-L WSVSD200/15-R HEIGHT 4" 4" 6" 6" 8" 8" 4" 4" 6" 6" 8" 8" Overhead Light Fixtures Plastic Box Rails The plastic box rail is easily adjustable for ergonomic access. It can be mounted parallel to your benchtop or at a 15° angle. The PB Rail is attached via the same simple doublenotch system as adjustable shelves. It can hold selected Lista or other boxes that have hanger lips at the rear for attaching to a louvered panel. Plastic boxes are found on page 119. PART NO. WIDTH WR21 WR27 WR33 WR39 WR45 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" MAXIMUM # OF 3" BOXES/RAIL 7 9 11 13 15 48" long 3-tube fluorescent fixture tilts up or down 15°. Brackets allow light fixture to be mounted to frames 22" to 90" wide. Includes switch and 8' grounded electrical cord. Requires support brackets. PART NO. OHL/48 OHL/48-1 OHL/48-2 OHL/TR-BRK WIDTH 48" 48" 48" DESCRIPTION light only for FlexWorks 22" to 48" for FlexWorks 49" to 90" pair of support brackets Mounts vertically to either inside or outside of upright. Bracket and hardware supplied. Available in 15 amp or 20 amp, and GFCI. Lighted on/off switch, 6' cord with grounded plug and circuit breaker are standard. PART NO. EOP15-15/KIT EOP15-20/KIT EOP15-GF/KIT DESCRIPTION 15 amp with 6 outlets 20 amp with 6 outlets 15 amp GFCI with 6 outlets Horizontal Power/Utility Rails Tool Rails Support Brackets The tool rail spans the length of the benchtop. It is available in 48", 60" or 72" lengths. Each tool rail has a 30 lb. capacity, and comes complete with a trolley, 2 hangers, 2 endstops and 2 end caps in black finish. Balancer not included. Requires support brackets. A pair of support brackets is required for mounting overhead light and tool rail. Brackets can support both light and up to 2 tool rails. PART NO. TR48 TR60 TR72 PART NO. OHL/TR-BRK DESCRIPTION pair of support brackets LENGTH 48" 60" 72" Self-contained, 6-plug electrical outlet strip with 6' cord, mounts into holes on insides of uprights. Power rail pivots on axis, providing full horizontal adjustability. 110V, 15 amp circuit breaker, UL and CSA approved. Contact Lista for other power options. PART NO. WU21P WU27P WU33P WU39P WU45P SECTION WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" Airhose Attachment Swing Arm Tool Rail The swing arm tool rail is available in one 36" length and swings 180°. It has a 30 lb. capacity and includes a trolley, 1 endstop and 1 end cap. Balancer not included. Does not require support bracket. PART NO. SWT36 Small bracket bolts to inside or outside of upright. Quick-connect fitting not supplied. PART NO. BKA DESCRIPTION bracket for air supply LENGTH 36" 87 FlexWorks System Pivoting Accessories, Backstops and Markerboards FlexWorks System Overhead Cabinets and Back Panels ® ® Overhead Cabinets Back Panels 16 1/4" high x 15" deep Sturdy steel panels easily attach between uprights. All panels are available in heights of 12", 18" and 30". PART NO. OHC2116- ■ - ■ OHC2716- ■ - ■ OHC3316- ■ - ■ OHC3916- ■ - ■ OHC4516- ■ - ■ 29" high x 15" deep Monitor Shelves Document Holders Arm swings 180° for easy ergonomic access, and bolts to the inside or outside of an upright. For working with computer equipment. Arm swings 180° for easy ergonomic access, and bolts to the inside or outside of an upright. For displaying papers, plans, etc. PART NO. WMS WMS-L PART NO. WDH WDH-L DESCRIPTION right mount left mount CAPACITY 50 lb. 50 lb. DESCRIPTION right mount left mount Arm swings 180° for easy ergonomic access, and bolts to the inside or outside of an upright. For easy access to small tools, instruments, parts, etc. Ribbed mat included. PART NO. WAS WAS-L DESCRIPTION right mount left mount Arm swings 180° for easy ergonomic access, and bolts to the inside or outside of an upright. For displaying large documents, and open binders and books. PART NO. WDHW WDHW-L DESCRIPTION right mount left mount Overhead Cabinets and Accessories Reversible Markerboards/Tackboards Lista overhead cabinets can attach to a FlexWorks frame for above-worksurface storage. Cabinets easily mount to FlexWorks frame with mounting rails. Cabinets come without doors (to order overhead cabinet without doors, use part number in chart to right), or can be ordered with door(s) as shown below. For descriptions of overhead cabinets, see page 105. Two-sided reversible board. Features white magnetic markerboard on 1 side and gray fabric tackboard on the other. Easily attaches to L-shaped channel which bolts to uprights. Also functions as privacy panel and sound dampener. 30" high. How to order a FlexWorks overhead cabinet with door 1. Select cabinet that matches the section width you have chosen. 2. Select door (box ■). CAPACITY 15 lb. 15 lb. Large Document Holders Accessory Shelves CAPACITY 15 lb. 15 lb. CAPACITY 15 lb. 15 lb. PART NO. RV21 RV27 RV33 RV39 RV45 Markerboard Tray PART NO. MBT Backstops Prevents items from rolling off workbench. 3" in height. Available in 5 standard widths (21", 27", 33", 39" and 45") which correspond to section widths. Painted to match frame. 88 USE WITH SECTION WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" Optional magnetic tray for holding markers or erasers. Fastens magnetically to markerboard. PART NO. WBS21 WBS27 WBS33 WBS39 WBS45 WIDTH 21" 27" 33" 39" 45" USE WITH SECTION WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" DESCRIPTION 18" long tray Door(s) for 29" high overhead cabinets HD = hinged doors HDP = hinged doors with steel-framed plexiglas* SD = sliding doors SDP = sliding doors with steel-framed plexiglas* Door(s) for 16 1/4" high overhead cabinets RD = retractable door * plexiglas doors available for cabinets 27" and wider only 3. Select lock type (box ■). I = individual K = keyed-alike M = master PART NO. OHC2129- ■ - ■ OHC2729- ■ - ■ OHC3329- ■ - ■ OHC3929- ■ - ■ OHC4529- ■ - ■ WIDTH 21" 27" 33" 39" 45" To order panels, the height of the panel (“12”, “18” or “30”) must be written in place of the red box in the part number. The combined height of the panels cannot exceed the section height. EXAMPLE: to order a pegboard panel that fits a 27 1⁄ 4" long and 18" high section, the part number is WPP2718. USE WITH SECTION WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" Overhead Cabinet Additional Shelves (For 29" High Cabinets) 13 1 ⁄ 2" deep PART NO. OHC-S21 OHC-S27 OHC-S33 OHC-S39 OHC-S45 FOR USE WITH 21" cabinet 27" cabinet 33" cabinet 39" cabinet 45" cabinet Overhead Cabinet Canopy Tops PART NO. OHC-C21 OHC-C27 OHC-C33 OHC-C39 OHC-C45 USE WITH SECTION WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" Pegboard panel accepts all standard pegging devices (i.e. hooks, etc.). Ideal for placement of commonly used tools. Stiffener (included) is required for 18" and 30" panels. PART NO. WPP21 ■ WPP27 ■ WPP33 ■ WPP39 ■ WPP45 ■ Overhead Cabinet FlexWorks Mounting Rails PART NO. OHC-FWB21 OHC-FWB27 OHC-FWB33 OHC-FWB39 OHC-FWB45 Pegboard Panels USE WITH SECTION WIDTH 21 1⁄ 4" 27 1⁄ 4" 33 1⁄ 4" 39 1⁄ 4" 45 1⁄ 4" Solid Privacy Panels Privacy panel encloses a section and can also be used to hold/display items with magnets. Louvered Back Panels Louvered panel is designed to accommodate industry- standard plastic boxes that feature louvered edge or lip. Stiffener (included) is required for 18" and 30" panels. PART NO. WLP21 ■ WLP27 ■ WLP33 ■ WLP39 ■ WLP45 ■ PART NO. WSP21 ■ WSP27 ■ WSP33 ■ WSP39 ■ WSP45 ■ USE WITH SECTION WIDTH 21 1⁄ 4" 27 1⁄ 4" 33 1⁄ 4" 39 1⁄ 4" 45 1⁄ 4" USE WITH SECTION WIDTH 21 1⁄ 4" 27 1⁄ 4" 33 1⁄ 4" 39 1⁄ 4" 45 1⁄ 4" * for lock options, see page 42 4. Select mounting rail that matches the section width you have chosen. 5. Select cabinet color (see page 43 for color chart). EXAMPLE: to order a Bright Blue OHC2716 overhead cabinet with a retractable door and an individual lock, the part number would be OHC2716-RD-I , the mounting rail would be OHC-FWB27 and the paint color code would be “BB.” 89 FlexWorks System Pivoting Accessories, Backstops and Markerboards FlexWorks System Overhead Cabinets and Back Panels ® ® Overhead Cabinets Back Panels 16 1/4" high x 15" deep Sturdy steel panels easily attach between uprights. All panels are available in heights of 12", 18" and 30". PART NO. OHC2116- ■ - ■ OHC2716- ■ - ■ OHC3316- ■ - ■ OHC3916- ■ - ■ OHC4516- ■ - ■ 29" high x 15" deep Monitor Shelves Document Holders Arm swings 180° for easy ergonomic access, and bolts to the inside or outside of an upright. For working with computer equipment. Arm swings 180° for easy ergonomic access, and bolts to the inside or outside of an upright. For displaying papers, plans, etc. PART NO. WMS WMS-L PART NO. WDH WDH-L DESCRIPTION right mount left mount CAPACITY 50 lb. 50 lb. DESCRIPTION right mount left mount Arm swings 180° for easy ergonomic access, and bolts to the inside or outside of an upright. For easy access to small tools, instruments, parts, etc. Ribbed mat included. PART NO. WAS WAS-L DESCRIPTION right mount left mount Arm swings 180° for easy ergonomic access, and bolts to the inside or outside of an upright. For displaying large documents, and open binders and books. PART NO. WDHW WDHW-L DESCRIPTION right mount left mount Overhead Cabinets and Accessories Reversible Markerboards/Tackboards Lista overhead cabinets can attach to a FlexWorks frame for above-worksurface storage. Cabinets easily mount to FlexWorks frame with mounting rails. Cabinets come without doors (to order overhead cabinet without doors, use part number in chart to right), or can be ordered with door(s) as shown below. For descriptions of overhead cabinets, see page 105. Two-sided reversible board. Features white magnetic markerboard on 1 side and gray fabric tackboard on the other. Easily attaches to L-shaped channel which bolts to uprights. Also functions as privacy panel and sound dampener. 30" high. How to order a FlexWorks overhead cabinet with door 1. Select cabinet that matches the section width you have chosen. 2. Select door (box ■). CAPACITY 15 lb. 15 lb. Large Document Holders Accessory Shelves CAPACITY 15 lb. 15 lb. CAPACITY 15 lb. 15 lb. PART NO. RV21 RV27 RV33 RV39 RV45 Markerboard Tray PART NO. MBT Backstops Prevents items from rolling off workbench. 3" in height. Available in 5 standard widths (21", 27", 33", 39" and 45") which correspond to section widths. Painted to match frame. 88 USE WITH SECTION WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" Optional magnetic tray for holding markers or erasers. Fastens magnetically to markerboard. PART NO. WBS21 WBS27 WBS33 WBS39 WBS45 WIDTH 21" 27" 33" 39" 45" USE WITH SECTION WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" DESCRIPTION 18" long tray Door(s) for 29" high overhead cabinets HD = hinged doors HDP = hinged doors with steel-framed plexiglas* SD = sliding doors SDP = sliding doors with steel-framed plexiglas* Door(s) for 16 1/4" high overhead cabinets RD = retractable door * plexiglas doors available for cabinets 27" and wider only 3. Select lock type (box ■). I = individual K = keyed-alike M = master PART NO. OHC2129- ■ - ■ OHC2729- ■ - ■ OHC3329- ■ - ■ OHC3929- ■ - ■ OHC4529- ■ - ■ WIDTH 21" 27" 33" 39" 45" To order panels, the height of the panel (“12”, “18” or “30”) must be written in place of the red box in the part number. The combined height of the panels cannot exceed the section height. EXAMPLE: to order a pegboard panel that fits a 27 1⁄ 4" long and 18" high section, the part number is WPP2718. USE WITH SECTION WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" Overhead Cabinet Additional Shelves (For 29" High Cabinets) 13 1 ⁄ 2" deep PART NO. OHC-S21 OHC-S27 OHC-S33 OHC-S39 OHC-S45 FOR USE WITH 21" cabinet 27" cabinet 33" cabinet 39" cabinet 45" cabinet Overhead Cabinet Canopy Tops PART NO. OHC-C21 OHC-C27 OHC-C33 OHC-C39 OHC-C45 USE WITH SECTION WIDTH 21 1 ⁄ 4" 27 1 ⁄ 4" 33 1 ⁄ 4" 39 1 ⁄ 4" 45 1 ⁄ 4" Pegboard panel accepts all standard pegging devices (i.e. hooks, etc.). Ideal for placement of commonly used tools. Stiffener (included) is required for 18" and 30" panels. PART NO. WPP21 ■ WPP27 ■ WPP33 ■ WPP39 ■ WPP45 ■ Overhead Cabinet FlexWorks Mounting Rails PART NO. OHC-FWB21 OHC-FWB27 OHC-FWB33 OHC-FWB39 OHC-FWB45 Pegboard Panels USE WITH SECTION WIDTH 21 1⁄ 4" 27 1⁄ 4" 33 1⁄ 4" 39 1⁄ 4" 45 1⁄ 4" Solid Privacy Panels Privacy panel encloses a section and can also be used to hold/display items with magnets. Louvered Back Panels Louvered panel is designed to accommodate industry- standard plastic boxes that feature louvered edge or lip. Stiffener (included) is required for 18" and 30" panels. PART NO. WLP21 ■ WLP27 ■ WLP33 ■ WLP39 ■ WLP45 ■ PART NO. WSP21 ■ WSP27 ■ WSP33 ■ WSP39 ■ WSP45 ■ USE WITH SECTION WIDTH 21 1⁄ 4" 27 1⁄ 4" 33 1⁄ 4" 39 1⁄ 4" 45 1⁄ 4" USE WITH SECTION WIDTH 21 1⁄ 4" 27 1⁄ 4" 33 1⁄ 4" 39 1⁄ 4" 45 1⁄ 4" * for lock options, see page 42 4. Select mounting rail that matches the section width you have chosen. 5. Select cabinet color (see page 43 for color chart). EXAMPLE: to order a Bright Blue OHC2716 overhead cabinet with a retractable door and an individual lock, the part number would be OHC2716-RD-I , the mounting rail would be OHC-FWB27 and the paint color code would be “BB.” 89 FlexWorks FloorStand ® The FlexWorks FloorStand is FlexWorks® FloorStand Frames the perfect complement to your The FlexWorks FloorStand is available with either an offset frame or centered frame configuration. The illustrations below show a side view of each configuration. FloorStands are available in either a 27" wide model (overall width of base is 31") or a 33" wide model (overall width of base is 37"). assembly workstation. Designed to accept standard FlexWorks components, the FloorStand can be used in combination with a Lista work- The combinations below and to the right are configured to be most useful in applications requiring shelf systems, multi-use systems and box holder systems. ➤ bench or by itself as a freestanding FlexWorks FloorStand Easy-Order Combinations Document Pocket workstation. Stores paperwork or manuals and can be mounted on upright frames. 12" high x 9" wide x 2 1⁄ 2" deep. Each FloorStand provides for a variety of storage and work acces- 64" sories. Shelves, plastic box holders, To order a mobile set (includes (4) 3 1⁄ 2" casters and (1) handle), add “M” to the end of the part number, or order optional caster set and handle shown to the left. Select color from the Lista colors shown on the back cover. PART NO. FW-DH markerboards and electrical outlet ------------------------------------------------------------------------------------------------- Multi-Use Systems – Offset Frame The Multi-Use System is an offset frame with a pegboard, a louvered panel and a shelf. It fits easily behind almost any workbench for instant access to frequently used materials, parts and tools. Combinations come standard with base and glides. PART NO. FSOF27-2 strips are all offered as standard ➤ accessories. ➤ Available in standard 27" and ➤ 33" widths, the FloorStand can be Power supply ➤ PART NO. FSOF27 FSOF27M* DESCRIPTION 27" stationary FloorStand 27" mobile FloorStand (includes handle and 3 1 ⁄ 2 " casters) FSOF33 33" stationary FloorStand FSOF33M* 33" mobile FloorStand (includes handle and 3 1 ⁄ 2 " casters) * 3 1⁄ 2" caster sets are standard. See next column for additional sizes. ➤ mobile configurations. Tackboard with reversible markerboard 18 1 ⁄ 4" ➤ 28" FSOF33-2 FloorStand – Offset Frame ordered in either stationary or Louvered panel Handle Shelf Systems – Offset Frame Base Shelf Shelf provides extra storage for large or heavy items, and can be installed or removed without tools. Includes ribbed mat. PART NO. FSBS27-0 FSBS27-C FSBS33-0 FSBS33-C DESCRIPTION base shelf, 27" wide – offset base shelf, 27" wide – centered base shelf, 33" wide – offset base shelf, 33" wide – centered Optional Caster Sets Adjustable shelf ➤ Variable angle shelf Variable angle shelf Casters 14" ➤ ➤ 28" ➤ FloorStand – Centered Frame Base shelf Casters PART NO. FSOF27-1 FSOF33-1 DESCRIPTION (1) 27" W x 60" H offset frame (3) variable angle shelves (1) base shelf with retainer mat (1) 33" W x 60" H offset frame (3) variable angle shelves (1) base shelf with retainer mat ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Box Holder Systems – Centered Frame ➤ Adjustable shelf The Shelf System is an offset frame with 3 adjustable shelves and 1 base shelf. Combinations come standard with base and glides. DESCRIPTION (1) 27" W x 60" H offset frame (1) 12" pegboard panel (1) 12" louvered panel (1) 12" adjustable shelf (1) base shelf with retainer mat (1) 33" W x 60" H offset frame (1) 12" pegboard panel (1) 12" louvered panel (1) 12" adjustable shelf (1) base shelf with retainer mat 64" Pegboard panel 90 ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• PART NO. FSCF27 FSCF27M* DESCRIPTION 27" stationary FloorStand 27" mobile FloorStand (includes handle and 3 1 ⁄ 2 " casters) FSCF33 33" stationary FloorStand FSCF33M* 33" mobile FloorStand (includes handle and 3 1 ⁄ 2 " casters) * 3 1⁄ 2" caster sets are standard. See next column for additional sizes. These larger caster sets (2 rigid and 2 swivel casters) replace the 3 1⁄ 2" casters that come with mobile FloorStand combinations. PART NO. CAST4X1.25 CAST4X2 CAST6X2 DESCRIPTION 4" x 1 1⁄ 4" caster set 4" x 2" caster set 6" x 2" caster set Handle Ordered individually. The Box Holder System is a centered frame with 6 louvered panels (3 per side) and a base shelf. It is designed for maximum access to plastic boxes of all sizes. (Plastic boxes must be ordered separately — see page 119.) Combinations come standard with base and glides. PART NO. FSCF27-1 FSCF33-1 DESCRIPTION (1) 27" W x 60" H centered frame (6) 18" louvered panels (1) base shelf with retainer mat (1) 33" W x 60" H centered frame (6) 18" louvered panels (1) base shelf with retainer mat PART NO. FS-HANDL 91 FlexWorks FloorStand ® The FlexWorks FloorStand is FlexWorks® FloorStand Frames the perfect complement to your The FlexWorks FloorStand is available with either an offset frame or centered frame configuration. The illustrations below show a side view of each configuration. FloorStands are available in either a 27" wide model (overall width of base is 31") or a 33" wide model (overall width of base is 37"). assembly workstation. Designed to accept standard FlexWorks components, the FloorStand can be used in combination with a Lista work- The combinations below and to the right are configured to be most useful in applications requiring shelf systems, multi-use systems and box holder systems. ➤ bench or by itself as a freestanding FlexWorks FloorStand Easy-Order Combinations Document Pocket workstation. Stores paperwork or manuals and can be mounted on upright frames. 12" high x 9" wide x 2 1⁄ 2" deep. Each FloorStand provides for a variety of storage and work acces- 64" sories. Shelves, plastic box holders, To order a mobile set (includes (4) 3 1⁄ 2" casters and (1) handle), add “M” to the end of the part number, or order optional caster set and handle shown to the left. Select color from the Lista colors shown on the back cover. PART NO. FW-DH markerboards and electrical outlet ------------------------------------------------------------------------------------------------- Multi-Use Systems – Offset Frame The Multi-Use System is an offset frame with a pegboard, a louvered panel and a shelf. It fits easily behind almost any workbench for instant access to frequently used materials, parts and tools. Combinations come standard with base and glides. PART NO. FSOF27-2 strips are all offered as standard ➤ accessories. ➤ Available in standard 27" and ➤ 33" widths, the FloorStand can be Power supply ➤ PART NO. FSOF27 FSOF27M* DESCRIPTION 27" stationary FloorStand 27" mobile FloorStand (includes handle and 3 1 ⁄ 2 " casters) FSOF33 33" stationary FloorStand FSOF33M* 33" mobile FloorStand (includes handle and 3 1 ⁄ 2 " casters) * 3 1⁄ 2" caster sets are standard. See next column for additional sizes. ➤ mobile configurations. Tackboard with reversible markerboard 18 1 ⁄ 4" ➤ 28" FSOF33-2 FloorStand – Offset Frame ordered in either stationary or Louvered panel Handle Shelf Systems – Offset Frame Base Shelf Shelf provides extra storage for large or heavy items, and can be installed or removed without tools. Includes ribbed mat. PART NO. FSBS27-0 FSBS27-C FSBS33-0 FSBS33-C DESCRIPTION base shelf, 27" wide – offset base shelf, 27" wide – centered base shelf, 33" wide – offset base shelf, 33" wide – centered Optional Caster Sets Adjustable shelf ➤ Variable angle shelf Variable angle shelf Casters 14" ➤ ➤ 28" ➤ FloorStand – Centered Frame Base shelf Casters PART NO. FSOF27-1 FSOF33-1 DESCRIPTION (1) 27" W x 60" H offset frame (3) variable angle shelves (1) base shelf with retainer mat (1) 33" W x 60" H offset frame (3) variable angle shelves (1) base shelf with retainer mat ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Box Holder Systems – Centered Frame ➤ Adjustable shelf The Shelf System is an offset frame with 3 adjustable shelves and 1 base shelf. Combinations come standard with base and glides. DESCRIPTION (1) 27" W x 60" H offset frame (1) 12" pegboard panel (1) 12" louvered panel (1) 12" adjustable shelf (1) base shelf with retainer mat (1) 33" W x 60" H offset frame (1) 12" pegboard panel (1) 12" louvered panel (1) 12" adjustable shelf (1) base shelf with retainer mat 64" Pegboard panel 90 ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• PART NO. FSCF27 FSCF27M* DESCRIPTION 27" stationary FloorStand 27" mobile FloorStand (includes handle and 3 1 ⁄ 2 " casters) FSCF33 33" stationary FloorStand FSCF33M* 33" mobile FloorStand (includes handle and 3 1 ⁄ 2 " casters) * 3 1⁄ 2" caster sets are standard. See next column for additional sizes. These larger caster sets (2 rigid and 2 swivel casters) replace the 3 1⁄ 2" casters that come with mobile FloorStand combinations. PART NO. CAST4X1.25 CAST4X2 CAST6X2 DESCRIPTION 4" x 1 1⁄ 4" caster set 4" x 2" caster set 6" x 2" caster set Handle Ordered individually. The Box Holder System is a centered frame with 6 louvered panels (3 per side) and a base shelf. It is designed for maximum access to plastic boxes of all sizes. (Plastic boxes must be ordered separately — see page 119.) Combinations come standard with base and glides. PART NO. FSCF27-1 FSCF33-1 DESCRIPTION (1) 27" W x 60" H centered frame (6) 18" louvered panels (1) base shelf with retainer mat (1) 33" W x 60" H centered frame (6) 18" louvered panels (1) base shelf with retainer mat PART NO. FS-HANDL 91