Table of Contents - IEEE Entity Web Hosting

Transcription

Page 1
Table of Contents
Welcome To Toronto ................................................................................................................................................................ 2
PCIC Mission............................................................................................................................................................................. 3
Author s Information................................................................................................................................................................ 4
Guest Information ..................................................................................................................................................................... 5
Conference Hotel Information ................................................................................................................................................. 7
Scope Of The PCIC Technical Subcommittees..................................................................................................................... 10
58th Annual PCIC Conference Committee ............................................................................................................................ 11
Young Engineers Development Subcommittee (YEDS)....................................................................................................... 12
For First-Time Attendees ....................................................................................................................................................... 12
Myron Zucker Student Travel Program ............................................................................................................................... 13
Emeritus Subcommittee Luncheon........................................................................................................................................ 14
Condensed Etiquette Rules For Vendor Entertainment...................................................................................................... 14
Wednesday Luncheon Speaker .............................................................................................................................................. 14
Professional Development Hours (PDH) And Continuing Education Units (CEU) .......................................................... 15
Schedule At A Glance ............................................................................................................................................................. 16
IEEE PCIC 2011 Subcommittee And Working Group Meeting Schedule ..................................................................... 17
59th Annual............................................................................................................................................................................... 27
PCIC Technical Conference ................................................................................................................................................... 27
New Orleans, La ...................................................................................................................................................................... 27
September 24-26, 2012 ............................................................................................................................................................ 27
PCIC On-Line Surveys ........................................................................................................................................................... 28
Tutorial Proposal Form .......................................................................................................................................................... 32
Guest Activities........................................................................................................................................................................ 33
IEEE PCIC 2011 Toronto, Ontario Canada September 19 21, 2011............................................................................ 36
9th Annual PCIC-Europe Conference, 19th-21st June 2012 Prague, Czech Republic ........................................................ 37
THE 2011 PCIC CONFERENCE IN TORONTO
The Petroleum and Chemical Industry Committee (PCIC) of the Industry Applications Society of
IEEE invites you to attend its 58th annual conference in Toronto, Ontario Canada. The 2011
conference is scheduled for September 19-21, 2011. The Conference Tutorials will be held on
September 22nd.
Under the sponsorship of the Industry Applications Society, the PCIC Conference has become the
premier annual application meeting for practicing electrical engineers. Following conferences in
Cincinnati, Anaheim and San Antonio, the Committee is planning an equally outstanding event for
2011.
The PCIC conference is noted for the high quality and practical application of its technical papers. The technical program this
year will feature 51 papers focusing on the technology and issues faced by electrical engineers in the petroleum and chemical
industry.
In recent years, people have traveled from around the world to attend this informative and entertaining conference. Preconference activities will start on Saturday, September 17th. At the conclusion of the 2011 conference, the PCIC hosts
tutorials to provide for the transfer of technology from experienced application engineers to enlightened individuals looking
for continued education. The PCIC also sponsors a number of standards activities during the conference.
Page 2
Welcome to Toronto
IEEE/IAS/PCIC 2011
On behalf of the 2011 Local Conference Committee I invite you
to the 58th annual PCIC technical conference. Toronto is one of
the most cosmopolitan cities in the world; a place where
international ideas intersect with Canadian culture. A centre of
rare openness, warmth, energy and style, Toronto is enriched by
the fusion of traditions, passions and perspectives on life of the
more than 100 cultures found here.
Located in the heart of downtown, the Sheraton Centre Toronto is
our newly renovated conference hotel. Within walking distance to
the Theatre District, Museums and Shopping, downtown Toronto
has an attraction for everyone. Beyond the city limits breathtaking
attractions await you, Niagara Falls, Niagara on the Lake and a
renowned wine region
all within a short drive.
We are planning to take advantage of Toronto and Niagara area attractions for entertaining and memorable
Guest/Spouse programs. Daily tours and excursions will be arranged to begin each day after breakfast and end by
mid-afternoon, allowing free time for shopping, personal site seeing, or relaxing at the hotel. Convenient and
affordable travel packages to Toronto are available from anywhere in the world. As you prepare for your visit to
Toronto, consider learning more about our wonderful city: www.SeeTorontoNow.com.
So many volunteers work to make each conference a solid learning
opportunity, and each local conference committee is committed to organize a
venue where all can comfortably initiate and advance relationships so
important to conducting business in global electrical communities. We're
confident that the 2011 PCIC Technical Conference in Toronto will be
another highly successful event.
We look forward to hosting you in 2011 in Toronto!
Andrew Bagley
PCIC 2011 Local Committee Chair
Page 3
PCIC Mission
To provide an international forum for the exchange of electrical applications technology relating to the petroleum and
chemical industry, to sponsor appropriate IEEE standards activity for that industry, and to provide opportunity for
professional development.
PCIC Strategies
1.
The PCIC Annual Technical Conference will be held in locations of industry strength, and its location will be
rotated annually in an effort to attract national and international participation.
2.
The PCIC will proactively promote participation by a broad base of PCIC representatives, with an emphasis on both
younger and retired engineers.
3.
Attendees will be encouraged to participate in technical activities including authorship of papers and standards
development.
4.
The quality of the PCIC paper offerings is essential for the PCIC mission to succeed and will be given highest
priority. Preference will be given to application-oriented papers.
5.
The PCIC will actively seek opportunities for rewarding members for contributions to the PCIC and the profession.
6.
Technical Subcommittee areas of specialty will be continuously evaluated and updated to reflect the evolving needs
of the industry.
7.
User, manufacturer, consultant, and contractor participation will be encouraged in the activities of the PCIC to
strengthen the conference technical base.
8.
The PCIC will offer tutorials directed toward enhancing the technical, communication, and interpersonal skills of
petroleum and chemical industry engineers.
Page 4
General Information
Registration
Check In
Registration will be located at the Ballroom Registration Desk.
Saturday, September 17 (Pre-Registered packet pick up only)
Sunday, September 18
Monday, September 19
Tuesday, September 20
Wednesday, September 21
Thursday, September 22 (Tutorial Check-in)
7:00 a.m.
10:00 a.m.
10:00 a.m.
7:00 a.m.
7:00 a.m.
7:30 a.m.
8:00 a.m. and 12:30
5:00 p.m.
5:00 p.m.
4:00 p.m.
12:00 p.m.
12:00 p.m.
1:00 p.m.
Conference Breakfasts
For the convenience of registered attendees and their guest, a full breakfast will be provided each morning of the conference
from 7:00 a.m. to 8:00 a.m. in Sheraton Hall. The PCIC expresses its appreciation to the suppliers whose sponsorship
assists in the support of these breakfasts.
PCIC Orientation Breakfast
There will be a PCIC orientation breakfast on Monday at 7:00 a.m. in the Kenora Room on the second floor of the Sheraton
Centre. This orientation will provide an overview and history of the PCIC, review the activities of the week, and discuss how
to get involved with PCIC. First time attendees and others interested in learning more about PCIC are encouraged to attend.
Orientation will begin promptly at 7:00 a.m.
Author s Information
Registration
All authors must be registered at the conference for at least the day of paper presentation.
Authors Screening Room
A screening room is available with audio visual equipment for author screening in the Windsor East and West rooms:
Sunday: 12:00 p.m. - 9:00 p.m.
Monday/Tuesday: 7:00 a.m. - 9:00 p.m.
Wednesday: 7:00 a.m. - 4:00 p.m.
Authors Breakfast
Each morning of the conference, a complimentary breakfast will be held at 7:00 a.m. in the City Hall Room for the authors of
that day s presentations. All authors are to attend only on the day they are presenting to meet with your session chair and
review the technical session logistics.
Page 5
Guest Information
Guests of our attendees are a special part of the PCIC Conferences. The local
committee takes great care to help make their time at the conference as pleasant and
entertaining as possible by offering a variety of activities for them to participate in
while the attendees attend the daily sessions. And guests are welcome at the
numerous evening social functions and hospitality suites at the conference. PCIC
allows attendees to register one guest at no additional charge. A guest is defined as
a spouse/significant other, friend or child that is not involved in a petrochemical
industry related occupation. Co-workers or associates that are involved in any
related industries may not be registered as a guest.
Many PCIC social activity hosts offer alcoholic beverages to attendees and their guests. While the PCIC is not promoted as a
family event, students or children of attendees/guests are occasionally present. The PCIC does not restrict admittance to
social events based on age. It is the responsibility of the hosts to ensure there is no contravention of local liquor laws.
The Guest Hospitality Suite is open from 10:00 a.m. to 4:00 p.m. on Sunday and
8:00 a.m. to 4:00 p.m. on Monday through Wednesday. Guests can drop by for
refreshments, meet other guests, get local information or even plan an outing. The
Guest Hospitality Suite is located in the Churchill Room on the second floor of the
Sheraton Centre.
Guest Tours are offered by the local
committee on Saturday and Monday through Wednesday of the conference. The
tours allow the guest to experience and explore the local areas of interest see page
33 for more details. Check-in for all tours will be the Churchill Foyer on the
second floor of the hotel. Please arrive 15 minutes prior to the departure time for
your tour. (Note: Due to registration timing, no name tags are necessary for the
Saturday tour but should be with you at all other tours) All buses will leave from
the Sheraton Centre.
Complimentary Guest Breakfasts; Registered Guests are welcome to join their
partners at the main conference breakfasts. A light continental breakfast will be
served in the guest hospitality suite at the times posted.
Page 6
ABOUT THE IEEE PCIC CONFERENCE
Unlike many industry events, the IEEE PCIC conference is a technical conference, not a trade show. It brings together
professionals with a common focus on electrical installations and safety and provides an opportunity to exchange ideas and
learn the latest information on a wide range of topics. The conference papers and tutorials are presented by some of the
brightest minds in the petrochemical industry and great care is taken to ensure there is no commercialism in the information
provided.
Many PCIC members participate in the writing of industry standards and prior to the official start of the conference many
working groups meet to work on standards for the API and IEEE. These are open to all conference registrants to attend and
perhaps join to enhance, modify or develop the standards that drive this industry.
Major end users, engineering firms and manufacturers hold technical meetings before or after the conference. While these
meetings are typically closed to outsiders, their key personnel would be attending the conference and there is ample
opportunity to meet them to discuss topics of mutual interest.
Vendors are an integral part of PCIC. They support the technical and professional goals of the conference, as well as
authoring papers, sponsoring meals and breaks and hosting after hours hospitality events. Vendor participation is encouraged
and welcomed and they adhere to strict PCIC rules of etiquette.
Conference attendees work hard during the day, but there is also plenty of time for a little fun when the papers and meetings
end for the day. Numerous social events at the conference take place in the evening and, if you re up to it, some can last late
into the night. The events in the PCIC hospitality calendar are open to all registered conference attendees and guests at no
extra charge. Strict adherence to local liquor laws is required by conference attendees and their guests.
Some of the major events include;
The Sunday Social and Tailgate Parties are held the day before the conference begins. These two long running events
welcome attendees and their guest with fun, food and plenty of laughter. This is a time to relax, socialize and get ready
for a busy few days ahead.
The Monday Night Social, sponsored by the local committee, is PCIC s premier social event. Wander about in a
bustling, yet relaxed atmosphere, savor local foods and refreshments, while you meet old friends and make new ones.
The Social lasts, an all too brief, hour and a half then its time to carry on to some of the other social activities. The
Monday Night Social will be held in Grand Centre Ballroom from 6:00 p.m. to 7:30 p.m.
The Big Parties. A number of vendors host major hospitality events in the evenings. There s often dancing to live
music, games of chance played with funny money perhaps to bid on prizes, magic and always lots and lots of fun.
Food and refreshments are served and a good time is had by all.
Vendor Hospitality Suites are open after the conference sessions. The number of suites varies starting on Saturday to
Wednesday evening, but there s always food and refreshments, plenty of lively conversations and lots of opportunities to
have a bit of fun. Wander from suite to suite and maybe even see some of the latest innovations they have to offer.
The PCIC Executive and Local committees take great pride in providing a high quality and educational conference while
keeping the registration and participation costs low. There is no better value for those involved in the electrical field in the
petrochemical industry than the IEEE PCIC Annual Conference.
NOTE: Nametags and lanyards are provided for attendees and their guests in the registration package. This identifies you as
a conference participant as oppose to the general public. Please wear your nametags when attending any PCIC breakfasts,
meetings, luncheons, social functions or hospitality suites. Anyone not wearing an official nametag may be asked to leave.
Page 7
Primary Conference Hotel Information
Sheraton Centre Downtown
123 Queen Street West
Toronto, Ontario M5H 2M9
Canada
Phone:
416-361-1000
Toll-free: 1-800-648-4462
Fax:
1-210-223-6239
The 2011 IEEE-PCIC Conference will be held at the worldclass conference Sheraton Hotel in Toronto. The Sheraton is
located conveniently in the centre of the business and
entertainment districts in Toronto and steps away from the
Eaton Centre Shopping mall. . Sleep in comfort and style and
enjoy the restaurants, spas and shopping all in the hotel.
Hotel Facilities:
The Sheraton Centre offers a wide range of amenities including swimming pools, health club and spa. Within the hotel, are
three restaurants, a deli and a Café serving Starbucks s coffee. The hotel offers easy access to Toronto s PATH system
which connects many of the downtown hotels, restaurants, shopping centers and transit systems together in a safe, well
marked underground walkway system
Toronto s PATH System
PATH is downtown Toronto's underground
walkway. According to Guinness World Records, PATH is the world s largest
underground shopping complex over 28 km (17 miles) of shopping arcades.
With more than 125 grade level access points and 60 decision points PATH provides links to some of Toronto's major tourist
and entertainment attractions such as: the Hockey Hall of Fame, Roy Thomson Hall, Air Canada Centre, Rogers Centre, the
CN Tower and City Hall. Follow PATH and you'll reach your downtown destination easily in weatherproof comfort.
Parking in and around the Conference Hotel
Parking in downton Toronto is quite expensive and parking for larger vehicles such as motorhomes is very limited. Valet
parking is available at the Sheraton Centre for CAD$45 per night (with in and out privalidges). Public parking can be found
directly across Queen St. at City Hall for about CAD$20 per day. Signs are in the City hall parking lot to direct you to the
PATH system leading to the hotel or simply go to the street level and cross at the intersection.
Page 8
Sheraton Centre Hotel Conference Area Floor Plan
Page 9
Transportation to and Around Toronto
Important: Passport, Visa and authorization letter Requirements for entry into Canada
International Travelers Those travelling to the conference from outside the country will require a passport for entry to
Canada. For some countries, a visa may also be required. For additional information visit the government website:
http://www.cbsa.gc.ca/noncan-eng.html. While not mandatory, a letter of introduction from the conference organizers or
your employer to the Canadian immigration department has proven to be useful for some travellers entering Canada for
conferences. All requests for introductory letters should be sent to [email protected] once registration is
completed and conference fees are paid in full.
Toronto Area Airports
(YYZ) Toronto s Pearson Airport is among the top 30 airports in the world and is serviced by most major airlines. Pearson
is located about 40 kilometres (25 miles) from downtown Toronto or 30 - 40 minutes by car.
(YTZ) Toronto s Billy Bishop (Island) Airport located in downtown Toronto (less than 5 km to Sheraton Centre). It is
serviced by Porter Airlines (www.flyporter.com) only which operates flights to a limited number of cities including
Montreal, Ottawa, Boston, Chicago (Midway), and New York City. A free shuttle to Union Station is available which is
about a 10-15 minute walk to the Sheraton through Toronto s PATH system.
From Toronto Pearson Airport to the Conference Hotel (Sheraton Centre)
Public Transit Toronto Transit System (TTC) provides a regular accessible express bus service from Pearson Airport to
the Kipling Subway Station. From the Kipling Station take the eastbound subway to St. George Station then transfer to the
southbound subway to Osgoode Station which connects to the Sheraton through the underground PATH walkway system
and is clearly marked. The trip should take about an hour and costs CAD$3.00 cash each way (exact change is required).
Airport Express Shuttle The Airport Express takes about 40 minutes to reach the Sheraton Centre and costs CAD$19.75
one way or CAD$32.65 round trip when booked on line. (Tickets purchased at the airport cost slightly more.) Busses run
from the arrivals areas of Pearson Airport terminals 1 and 3 every 40 minutes between 4:15 a.m. and 11:10 p.m. To book the
shuttle, click on http://torontoairportexpress.hudsonltd.net/res?USERIDENTRY=IEEEPCIC&LOGON=GO from the link or
on the PCIC Toronto website or call (905) 564-6333 or (905) 564-3232 (and quote PCIC).
Taxis and Limousines Taxis to the Sheraton cost between CAD$40 and CAD$50, and Limousines between CAD$45 and
CAD$55 (tips extra). The journey takes about 30 - 40 minutes. Rates are based per car, not per passenger and major credit
cards are accepted.
Rental Cars:
Toronto Pearson International Airport has five rental car companies on-site and several more located nearby offsite. Onsite
Rental car agencies are located on Level 1 of the parking garage at each terminal. Maps to the hotel are available.
Link: http://www.gtaa.com/en/travellers/airport_information/ground_transportatio/car_rentals/
Page 10
Scope of the PCIC Technical Subcommittees
The PCIC technical subcommittees solicit technical papers to enable the exchange of electrical applications technology
related to the petroleum and chemical industry.
Chemical Subcommittee
Scope: Technical papers related to the application, installation and/or operational experiences as they relate to electrical
technology for the general chemical industry.
Electrochemical Subcommittee
Scope: Technical papers that grow and preserve the knowledge base used in the electrolytic production of metals and
chemicals
General Program Subcommittee
Scope: Technical papers of broad interest to the petroleum and chemical industry.
International Subcommittee
Scope: Technical papers related to petroleum and chemical industry applications outside of North America.
Marine Industry Subcommittee
Scope: Technical papers related to ships, barges and other floating structures used in the petrochemical industry
Production Subcommittee
Scope: Technical papers related to onshore and offshore, fixed and floating drilling, well head, and production facilities.
Refining Subcommittee
Scope: Technical papers related to petroleum refineries and petrochemical facilities.
Safety Subcommittee
Scope: Technical papers related to all aspects of electrical safety affecting the petrochemical industry.
Transportation Subcommittee
Scope: Technical papers related to pipelines, pumping stations and terminals as well as other means of transporting oil and
gas.
Electrical Safety Workshop Subcommittee
Scope: To support and promote long term planning for the IEEE IAS Electrical Safety Workshop
Page 11
58th Annual PCIC Conference Committee
Petroleum and Chemical Industry Committee Officers
Chair
Vice Chair
Secretary
John Nelson
Donald Dunn
Louis Barrios
Advisory & Awards
Awards Nominating
Chemical
Electrical Safety Workshop
Electrochemical
Emeritus
Facilities Planning
Financial
Historical
Information Technology
International
Marine Industry
Membership
Papers Review
Production
Publications
Publicity
Refining
Safety
Standards
Transportation
Tutorial
Young Engineers Development
Jim Rozsits
Bill Veerkamp
Dennis Bogh
Danny Liggett
Dennis Cochran
Leo Berg
Bill Casper
Pam Gold
Rick Bried
Kevin Peterson
Horst Kuemmiee
Rudy Bright
Miriam Blazowski
Dave Stewart
Robert Durham
Quent Reynolds
Kenneth McFarland
Kirti Shah
Paul Sullivan
Will McBride
Richard Paes
Richard Holub
Doug Brooks
NEI Electric Power Engineering Inc
Aramco Services Company
Shell Global Solutions
PCIC Subcommittees
Rockwell Automation
The Dow Chemical Co
GE Energy
DuPont
General Electric
L Berg Tech Services
Rockwell Automation
Thermon Industries
Shell Pipeline (Retired)
P2S Engineering, Inc.
Siemens
Amercable
EGS Appleton & O-Z/Gedney
WS Nelson
THEWAY Corp
ABB/Baldor
Cooper Crouse Hinds
Tesoro
DuPont
Consultant - Alaskan Oil Industry
Rockwell Automation
DuPont
Bantrel Company
Toronto Local Conference Committee
PCIC 2011 Local Committee Chair
Vice Chair
Finance Chair
Catering Chair
Conference Mailer Chair
Conference Social Chair
Emeritus Liaison/Local Liaison
Facilities Chair
Guest Activities Chair
Publications Chair
Publicity & Printing Chair
Registration Chair
Secretary
Sponsorship Chair
Audio Visual & Technical Program Chair
Audio Visual & Technical Program Vice Chair
Vendor Hospitality Chair
Website Chair
Young Engineers Development Chair
Andrew Bagley
Marty Cole
Resi Zarb
Vishal Gandhi
Marty Cole
Sam Palmer
Rick Billings
John Kay
Michelle and Adrian Orso
Quent Reynolds
Ashvin Bapat
Brian Keane
John Turner
Steve Wilson
Bill Hanavan
David Murray
Sergio Panetta
Sue Peirson
Ben Veiledal
Rockwell Automation
Hubbell - Killark
Iris Power
Siemens
Hubbell - Killark
Thermon
Retired
Rockwell Automation
TECO -Westinghouse
ABB/Baldor
GE Multilin
Cooper Industries
Swansea Consulting
Retired
Niagara Transformer
Schneider Electric
I-Gard
Rockwell Automation
Westburne
Page 12
Young Engineers Development Subcommittee (YEDS)
For First-Time Attendees
What is YEDS?
The Young Engineers Development Subcommittee (YEDS) is a subcommittee of the Petroleum and Chemical Industry
Committee (PCIC) of the IEEE. The committee was formed in 1996 with its charter to Provide and promote PCIC
technical conference and personal professional growth opportunity. The purpose of the YEDS is to focus on the needs
of first-time PCIC conference attendees.
YEDS Sponsored Activities:
Monday, September 19 - PCIC Orientation Breakfast: First time attendees and others interested in learning
more about the PCIC are encouraged to attend the Orientation Breakfast from 7:00 a.m. to 8:00 a.m. in
Conference Rm. C. The orientation will focus on the history of PCIC, how PCIC functions, how to get involved
with PCIC, and enlighten their conference awareness.
Tuesday, September 20 - YEDS Luncheon: First-time attendees are encouraged to join the YEDS Luncheon
from 11:15 a.m. to 12:45 p.m. in Conference Room G. The luncheon will focus on soliciting feedback from
participants on how PCIC can better encourage first-time attendee participation, improve professional
development through PCIC, and discuss new ideas for future PCIC conferences. This lunch will feature a
number of draws including free registration to next year s Conference! Please check the Attend Young
Engineers Tuesday Luncheon box on the registration form if you plan to attend.
PCIC Tutorials:
PCIC is sponsoring a number of world class half day technical tutorials on Thursday September 22 after the main
conference. First Time Attendees are entitled to attend one tutorial of their choice free of charge. For more
information on the PCIC Tutorials and requirements for your free tutorial see page 29.
For more information on YEDS activities go to http://www.ieee-pcic.org/subcommittees/yeds.html and
http://www.ieee-pcic.org/Conferences/2011_Toronto/index.html.
PCIC On-line Surveys
PCIC encourages feedback from the attendees and especially our YEDS members. This is to ensure that the PCIC
Conference remains one of those sponsored by the IAS and IEEE; we ask you go to the http://www.ieeepcic.org/Conferences/2011_Toronto/index.html after the conference to participate in our on-line survey. In addition to the
YEDS survey, there are 3 other PCIC surveys. See page 28 for more details.
Page 13
Myron Zucker Student Travel Program
It is vital for the ongoing success of the Petroleum and Chemical Industry Conference to attract young, new Electrical
Engineering talent who would greatly benefit from attending; however financial restrictions prevent them from participating.
Recognizing this, the PCIC has arranged with the IEEE Industrial Applications Society (IAS) to sponsor up to four Coop/Intern Students or recent graduates to attend the conference through the Myron Zucker Student Travel Program
The Myron Zucker Student Travel Program which is administered by the Young Engineers Development Subcommittee
(YEDS) provides the following benefits for the winning recipients:
$600 travel allowance
Free Hotel Registration
Free Conference Registration as a Student
One Free Tutorial
In order to be considered for the program the applicants shall:
Be an engineering Co-op / intern student, or have graduated less than 2 years ago from a recognized university,
college or technical school.
Be 21 years of age or older.
Complete the application form which is available on-line at http://www.ieee-pcic.org/subcommittees/yeds.html
Submit, with the application form, a 200-word essay describing how important attendance at PCIC will be to the
applicant.
Work for a company with one or more members who are full conference registrants; one of whom will vouch for the
applicant on the application form.
Be a member of (or willing to join) IEEE.
Become a member of the Young Engineers Development Subcommittee (YEDS) by attending the PCIC Orientation
Breakfast and YEDS Luncheon.
Attend the Monday & Wednesday Luncheons.
Attend the general program meeting and one sub-committee meeting.
Applicants who are presenting papers at the conference or otherwise require full registration are not eligible for the Myron
Zucker Student Travel Program as the program will only pay for Student Registration.
The recipient employers must be willing to pay the applicant their normal salary while they are at the conference, and only
one attendee per company will be allowed.
The selection of the recipients will be based on the quality of the submitted essays. .
Page 14
Emeritus Subcommittee Luncheon
The Emeritus Subcommittee Luncheon will be held on Tuesday, September 20th from 11:15 a.m. to 12:45 p.m. in
Conference Room F. The Emeritus Subcommittee includes PCIC members who have retired at least once from our industry.
Members volunteer their services in support of a variety of PCIC activities. Leo Berg is the Chair of the Emeritus
Subcommittee, and can be reached at [email protected].
Condensed Etiquette Rules for Vendor Entertainment
Vendor participation is welcomed at the PCIC. Etiquette Rules are designed to prevent conflicts of vendor activities with the
technical programs. Conduct at the conference must be in accordance with the complete PCIC Rules of Etiquette, which are
available at the registration desk or at www.ieee-pcic.org. The following information is a summary of those rules:
All Vendor personnel working in a hospitality suite must be registered for the conference.
Hospitality rooms must be closed during all official conference functions such as technical papers, official
luncheons, Monday Night Conference Social, Tuesday afternoon subcommittee meetings, etc.
Commercial demonstrations and commercial literature distribution must be confined to the vendor hospitality suite.
A vendor activity must not host more than 25 registrants (excluding guests and host company personnel) away from
the conference hotels from 7:00 a.m. Monday through 5:00 p.m. Wednesday.
Conference Record
The Registration Fee includes one CD copy of the Conference Record. Additional CD copies as well as bound print copies
may be purchased prior to the conference by indicating your requirements on the registration form. A limited number of both
versions will be available at the conference for an additional fee.
Wednesday Luncheon Speaker
TBA.
Page 15
Professional Development Hours (PDH) and Continuing Education Units (CEU)
Many professional engineering organizations require continued learning to stay current with changing technology,
procedures, practices, standards, and equipment. Most jurisdictions use Professional Development Hours (PDHs) and
Continuing Education Units (CEUs) to measure and log training and education. Currently, thirty states require Professional
Development Hours to maintain P.E. licensure, encouraging engineers to seek CEUs for their participation in Continuing
Education programs. CEUs readily translate into PDHs (1CEU=10 PDHs).
Evidence of participation in the PCIC Conference, standards activities, and/or tutorials may meet part or all of your
organizations requirements for ongoing training and education. The PDH and CEU certification processes are managed
separately completely independent of each other within PCIC.
Professional Development Hours (PDH)
PCIC has a process for attendees to log and receive a PDH certificate for attendance at conference papers, participation in
standards activities, authoring and presenting papers, performing technical paper reviews, and technical leadership. Many
organizations accept PDH hours as evidence of continued education. It is to the responsibility of the attendee to determine
what conference activities meet their organizations educational requirements.
PCIC charges attendees a $15 fee for processing a PDH certificate. When an attendee registers for a PDH certificate, a form
for logging your participation at events during the conference will be included with your registration packet. Instructions are
provided on the form for submitting the completed worksheet form. At the end of the conference submit form to PCIC for
processing and a PDH certificate will be issued detailing the activities logged on your worksheet including, any time that
logged for participating in tutorials
Continuing Education Units (CEU)
CEU s are nationally recognized uniform units. IEEE is an Authorized Provider of CEUs through The International
Association of Continuing Education and Training (IACET), and has adopted IACET guidelines and criteria for all its
continuing professional development programs.
PCIC provides an opportunity for attendees to earn CEU s for participation in tutorials. These units are based on documented
participation, competency testing and are issued through IEEE. CEU s can only be offered for participation in tutorials, as
testing is a requirement of the CEU process.
PCIC charges attendees a $25 fee to process a CEU certificate through IEEE. This fee covers the CEU processing costs for
all tutorials attended. A CEU certificate will be provided for each tutorial attended.
IMPORTANT NOTES REGARDING PDUs AND CEUs:
1.
Pre-registration is mandatory to obtain these certificates. Please check the appropriate box on the registration form
to receive the appropriate documentation with your registration package.
2.
All PDH and CEU documentation and/or certificates will be emailed after the conference.
3.
PDH and CEU credits are optional and no action is required if these are not required
4.
CEU certificates are issued for participation in tutorials only. IACET requirements do not permit CEU certificates to
be issued for time spent attending papers, standards, technical meetings, or for presenting papers.
Page 16
Schedule at a Glance
Monday
September 19, 2011
Tuesday
September 20, 2011
Wednesday
September 21, 2011
Thursday
September 22, 2011
7:00 am
Authors Breakfast City Hall
7:00 am
7:00 am
7:00 am
PCIC Executive Committee
Osgoode West
7:00 am
PCIC Orientation Breakfast
Kenora
7:00 am - 8:00 am
* Attendees Breakfast
Sheraton Hall A-E
8:15 am - 11:15 am
Technical Sessions
General
Grand East
7:00 am
Tutorial Leaders Breakfast York
7:00 am - 8:00 am
*Attendees Breakfast
Sheraton Hall A-E
8:15 am - 11:15 am
8:15 am - 11:15 am
Technical Sessions
Technical Sessions
Chemical I Essex
Chemical II Dominion South
Electrochemical I - Civic South
Electrochemical II - Essex
International I Civic North
International II - Dominion North
Safety I Dominion North
Transportation II Civic North/South
Transportation I - Dominion South
11:30 am - 1:30 pm
11:15 am - 12:45 pm
Luncheons
Awards Luncheon**
Grand Centre West
Attendees** Grand Centre West
Emeritus Conf. Room F
YEDS Conf. Room G
Paper Review Osgoode West
2:00 pm - 5:00 pm
Technical Sessions
General II - Grand East
Marine I - Dominion South
Production I - Dominion North
Refining I - Essex
7:00 am - 8:00 am
*Attendees Breakfast
Sheraton Hall A-E
12:30 pm - 5:00 pm
PCIC Subcommittee Meetings
See Meeting Schedule
8:00 am - 5:00 am
PCIC Annual Mtg./Executive SC
Osgoode East
8:00 am - 11:45 am
Tutorial A - Grand West
Tutorial B - Grand Centre
Tutorial C Grand East
11:45 am - 1:30 pm
Noon - 1:00 pm
PCIC Luncheon**
Grand Centre West
Tutorial Lunch
Sheraton Hall E
Luncheon Speaker
TBA
2:00 pm - 5:00 pm
Technical Session
1:15 pm - 5:00 pm
Tutorial D - Grand West
Marine II - Dominion South
Production Il Essex
Refining II Civic North/South
Tutorial E - Grand Centre
Tutorial F - Grand East
6:00 pm - 7:30 pm
5:00 pm - Closing
5:00 pm - Closing
Conference Social
Grand Centre West
Visit Vendors Hospitality Suites
5:00 pm - 6:00 pm and
7:30 pm Closing
* Only Registered attendees and guests are permitted to attend scheduled breakfast.
** Guests and single day registrants do not include luncheons. Lunch tickets can be bought for additional cost.
Page 17
IEEE PCIC 2011 Subcommittee and Working Group Meeting Schedule
Note: The Conference Committee encourages all attendees, especially new attendees, to obtain maximum value from the PCIC conference
with active participation in the many Subcommittee and Working Group meetings that are held before and during the Conference. Active
participation in the Working Group sessions in particular will provide the attendee insight and understanding of the Industry issues that are
normally addressed in the development and updating of IEEE Standards. If you are not presently a member of a Technical Subcommittee,
we invite you to attend one of the Tuesday afternoon sessions of interest and join as a member. All attendees are invited to any
subcommittee meetings except those indicated with an asterisk (*).
Thursday September 15, 2011
8:00 a.m. - 5:00 p.m.
API Standard RP 500/505/IAG/ NEC Proposals
8:00 a.m. - 5:00 p.m.
API 547 Large AC Motors
Friday September 16, 2011
8:00 a.m. - 5:00 p.m.
API Standard RP 500/505/IAG/ NEC Proposals
8:00 a.m. - 5:00 p.m.
API 547 Large AC Motors
8:00 a.m. - 5:00 p.m.
ACC Elect. Codes & Standards
Saturday September 17, 2011
8:00 a.m. - 10:00 a.m.
P1458 Molded case CB for Industrial Applications
8:00 a.m. 10:00 a.m.
P1673- High Pressure Seals for Conduit and Cable
8:00 a.m. 12:00 noon SOEE- API Standards on Electrical Equipment Subcommittee
10:00 a.m. 12:00 p.m. P1242-RP for Specifying and Selecting Cables for Petrochemical Plant Applications
10:00 a.m. 12:00 p.m. P1716- Guide to Managing Natural Disaster Impact
1:00 p.m. 2:00 p.m.
P1714 RP for Industrial UPS Systems
1:00 p.m. 3:00 p.m.
P1584- Guide for Performing Arc Flash Hazard Calculations
1:00 p.m. 3:00 p.m.
P1826- Power Electronics Open Systems I/F in Zonal Systems to >100kW
2:00 p.m. 3:00 p.m.
P463-Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
3:00 p.m. 5:00 p.m.
P60092-510 Electrical Installations on ships- Part 510 HVSC
3:00 p.m. 5:00 p.m.
P1683- Enhanced Safety MCC
Sunday September 18, 2010
8:00 a.m. 9:00 a.m.
Awards Nominating Meeting*
8:00 a.m. 9:00 a.m.
P1810 Guide for Installation of Circuit Integrity Cables
8:00 a.m. 12:00 noon P-45.1 through 8 Electrical Installation on Shipboard
8:00 a.m. 6:00 p.m.
P1713- Electrical Shore to Ship Connections
9:00 a.m. 10:00 a.m.
P576 Installation and Testing of MV Cables
9:00 a.m. 10:00 a.m.
P1566- Adjustable Frequency Drives > 500 HP
9:00 a.m. 11:00 a.m.
P515 and P515.1 Heat Tracing Standards
9:00 a.m. 10:00 a.m.
P1017-Field Testing Electric Submersible pump cable
9:00 a.m. 11:00 a.m.
Advisory & Awards Subcommittee*
9:00 a.m. 11:00 a.m.
Finance & Facilities Planning*
9:00 a.m. 12:00 noon P1814 - Electrical System Design to Improve Electrical Safety
10:00 a.m. 11:00 a.m. 841- TEFC Squirrel Cage Induction Motors, 500HP
10:00 a.m. 11:00 a.m. P1018- Specifying Electric Submersible Pump Cables EPR Insulation
11:00 a.m.- 12:00 noon Advisory & Awards with Finance & Facility*
11:00 a.m.- 12:00 noon P-45.8 Electrical Installation on Shipboard Breakout
ROOM
Civic North
Civic South
Civic North
Civic South
Wentworth
Kent
Simcoe
Civic North
Simcoe
Civic South
Kent
Civic South
Simcoe
Kent
Simcoe
Civic South
Conf. Room B.
Civic North
Essex
Conf. Room D.
Civic North
Conf. Room G.
Kent
Kenora
Conf. Room B.
Osgoode E.
Conf. Room C.
Conf. Room G.
Kenora
Conf. Room B.
Elgin
Page 18
Sunday September 18, 2010
11:00 a.m.- 12:00 noon P1019- Specifying Electric Submersible Pump Cables Polypropylene Insulation
11:00 a.m.- 12:00 noon 844 RP for Elec. Impedance, Induction, & Skin Effect Heating of pipelines & vessels
11:00 a.m.- 12:00 noon 1349- Electric Motors in Hazardous Locations
1:00 p.m. -3:30 p.m.
General Program
3:00 p.m.- 4:00 p.m.
Vendor Hospitality Pre-event Meeting
3:00 p.m. 5:00 p.m.
Electrical Safety Workshop Committee*
3:00 p.m. 5:00 p.m.
Codes & Regulations
4:00 p.m. 5:00 p.m.
Tutorials Subcommittee Meeting
Monday September 19, 2010
8:15 a.m. 11:15 a.m.
General Technical Session I
11:45 a.m. 1:30 p.m.
Awards Lunch
2:00 p.m. 5:00 p.m.
General Technical Session II
2:00 p.m. 5:00 p.m.
Marine Technical Session I
2:00 p.m. 5:00 p.m.
Production Technical Session I
2:00 p.m. 5:00 p.m.
Refining Technical Session I
6:00 p.m. 7:30 p.m.
Conference Social
Tuesday September 20, 2010
8:15 a.m. 11:15 a.m.
Chemical Technical Session I
8:15 a.m. 11:15 a.m..
Electrochemical Technical Session I
8:15 a.m. 11:15 a.m..
International Technical Session I
8:15 a.m. 11:15 a.m..
Safety Technical Session I
8:15 a.m. 11:15 a.m..
Transportation Technical Session I
11:15 a.m. 12:45 p.m. Attendees Lunch- Grab & Go
11:15 a.m. 12:45 p.m. Emeritus Lunch
11:15 a.m. 12:45 p.m.. YEDS Lunch for First Time Attendees
11:15 a.m. 12:45 p.m. Paper Review Lunch*
12:45 p.m. 2:15 p.m.
Standards Subcommittee Meeting
2:15 p.m. 3:30 p.m.
Chemical Technical Meeting
2:15 p.m. 3:30 p.m.
Electrochemical Subcommittee Meeting
2:15 p.m. 3:30 p.m.
International Subcommittee Meeting
2:15 p.m. 3:30 p.m.
Marine Subcommittee Meeting
2:15 p.m. 3:30 p.m.
Production Subcommittee Meeting
2:15 p.m. 3:30 p.m.
Refining Subcommittee Meeting
2:15 p.m. 3:30 p.m.
Transportation Subcommittee Meeting
3:30 p.m. 5:15 p.m.
Safety Subcommittee Meeting
Wednesday September 21, 2010
8:15 a.m. 11:15 a.m.
Chemical Technical Session ll
8:15 a.m. 11:15 a.m..
Electrochemical Technical Session II
8:15 a.m. 11:15 a.m.
International Technical Session II
8:15 a.m. 11:15 a.m.
Transportation Technical Session II
11:45 a.m. 1:30 p.m.
PCIC Lunch
Kenora
Kent
Conf. Room G.
Osgoode East
Conf. Room E.
Conf. Rm G
Kent
Conf. Room B.
Grand East
Grand Center West
Grand East
Dominion South
Dominion North
Essex
Grand Center West
Essex
Civic South
Civic North
Dominion North
Dominion South
Grand Center West
Conf. Room F.
Conference Rm. C
Osgoode West
Grand East
Essex
Sheraton Hall A
Civic North
Sheraton Hall B.
Dominion South
Dominion North
Civic South
Grand East
Dominion South
Essex
Dominion North
Civic North/South
Grand Center West
Page 19
2:00 p.m. 5:00 p.m.
Marine Technical Session II
2:00 p.m. 5:00 p.m.
Production Technical Session Il
2:00 p.m. 5:00 p.m.
Refining Technical Session II
5:00 p.m.-7:00 p.m.
PCIC Executive Committee & Local Committee*
Thursday September 22, 2010
8:00 a.m. 9:00 a.m.
PCIC Annual Business Meeting*
8:00 a.m. 11:45 a.m.
Tutorial A Morning
8:00 a.m. 11:45 a.m.
Tutorial B Morning
8:00 a.m. 11:45 a.m.
Tutorial C Morning
9:00 a.m. 5:00 p.m.
PCIC Executive Committee Meeting*
12:00 noon 1:00 p.m. Tutorial Lunch
12:00 noon 1:00 p.m. Executive Committee Lunch*
1:15 p.m. - 5:00 p.m.
Tutorial D Afternoon
1:15 p.m. - 5:00 p.m.
Tutorial E Afternoon
1:15 p.m. - 5:00 p.m.
Tutorial F Afternoon
Dominion South
Essex
Civic North/South
Dominion North
Osgoode East
Grand West
Grand Center
Grand East
Osgoode East
Sheraton Hall E
Osgoode West
Grand West
Grand Center
Grand East
Note: All attendees, and especially new attendees, are invited to all
subcommittee meetings except those indicated with an asterisk (*).
IEEE Standards
The PCIC Standards Subcommittee coordinates the activities of 38 IEEE Standards. Each has established a Working Group
to meet, discuss and make the technical decisions necessary to form and maintain the standard. Many of these Standards
Working Groups arrange their meeting schedule around the PCIC, either a couple of days before or after the annual
conference.
The key to any standard is the quality and commitment of its members. Technical knowledge or expertise is just a part of
what constitutes a good member. Consistent participation, the ability to listen, to discuss, and understand, along with a
willingness to accept the ideas of others are just as important.
The PCIC provides you with an excellent opportunity to get involved with IEEE Standards development. You are welcome
to attend as a guest or better yet, join a Working Group as a member to influence the outcome of the next revision of a
standard or even work on the development of a new one.
The individual meetings are listed in the detailed schedule starting on page 17. All of the Working Group meetings are open.
Page 20
2011 PCIC CONFERENCE TECHNICAL PROGRAM
This list of technical papers will be presented at the 2011 IEEE PCIC Conference. Any last minute changes to the final
program can be found on the PCIC 2011 Toronto Conference website.
GENERAL TECHNICAL SESSION
Monday September 19, 2011 8:15 a.m. 11:15 a.m.
Sheraton Centre Toronto Grand East
Presiding John Nelson
PCIC-2011-1
Electrical Energy and the Petro-Chemical Industry: Where Are We Going?
Keith Malmedal
NEI Electric Power Engineering
P.K. Sen
Colorado School of Mines
Jared Candelaria
NEI Electric Power Engineering
PCIC-2011-2
An Analysis of the National Electrical Code Requirements for Critical Operations Power Systems (COPS) and
the Effect on Refineries and Petrochemical Facilities
Paul E. Guidry
Fluor Enterprises, Inc.
Wahab Mehmood
Fluor Enterprises, Inc.
PCIC-2011-3
Future Trends in Electrical Substations from the End-Users Perspective Near Future Safety Features
James E. Bowen
Nicholas Weber
BP
GENERAL TECHNICAL SESSION II
Monday September 19, 2011 2:00 p.m. 5:00 p.m.
Sheraton Centre Toronto Grand East
Presiding Donald G. Dunn
PCIC-2011-4
Turbine/Generator Governor Droop/Isochronous Fundamentals
Roy E. Cosse Jr.
Chevron
Michael D. Alford
Chevron
Masoud Hajiaghajani
Chevron
E. Roy Hamilton
Chevron
A Graphical Approach
PCIC-2011-5
Experiences and Learnings in Executing a Flawless Turnaround at a Petrochemical Facility
Ron Derworiz
Shell Canada Energy
Nic Leblanc
Shell Canada Energy
Wolfgang Bemer
R.Stahl, Ltd.
PCIC-2011-6
Electrical Equipment Maintenance 101
Rick Mendler
Gary Osborne
Trey Thevenet
Monty Janak
Marty Janak
ConocoPhillips
INEOS Olefins & Polymers USA
Tidal Power Services
Page 21
MARINE TECHNICAL SESSION I
Sheraton Centre Toronto Dominion South
Presiding Rudy Bright
PCIC-2011-7
Effective Power Systems for Gulf of Mexico Deepwater Floaters Demand Attention to Essential Services
During Design
Don Voltz
BP
Stan Beaver
Electrical Consultant
Christopher Chaney
Mustang Engineering
Edward Gilson
BP
PCIC-2011-8
Dry-Type vs. Liquid-Immersed Transformers; Specification Installation and Operational Impact in a
Marine Environment
Ray Tanner
Chevron ETC
Jeffrey Wimmer
Equisales Associates Inc
Joel Kern
ABB
Tommy Nunn
ABB
PCIC-2011-9
Electrical System Design of Local Generator Applications Involving Adjustable Speed Drives
Richard Paes
Rockwell Automation
Kurt Concienne
Chevron
Terry Rainey
Chevron
Gary Skibinski
Rockwell Automation
Stefan Zak
Rockwell Automation
PRODUCTION TECHNICAL SESSION I
Sheraton Centre Toronto Dominion North Presiding Robert A. Durham
PCIC-2011-10
Increasing Electrical Safety by Reducing the Risk of Arc Flash Hazards
Donna Hodgson
Shell
Marcus McKinney
Shell
Shelly DeGrate
Powell Industries
PCIC-2011-11
IECEx Assessment and Certification of Personnel Competencies for Individuals Working in Hazardous
Locations
Marty Cole
Hubbell Canada - Killark
Kerry McManama
Underwriters Laboratories
PCIC-2011-12
Subsea High-Voltage Power Distribution
Terence Hazel
Henri Baerd
Jarle Bremnes
Josselin Legeay
Schneider Electric
Converteam
Nexans Norway AS
Deutsch Offshore
REFINING TECHNICAL SESSION I
Sheraton Centre Toronto Essex
Presiding Kirti Shah
PCIC-2011-13
What Does It Take to Design a Low Inrush Large Induction Motor?
Madu Thirugnanasambandamoorthy General Electric Canada
Christophe del Perugia
General Electric Canada
Bharat Mistry
Page 22
PCIC-2011-14
Motor Reacceleration to Improve Process Uptime
Lubomir Sevov
GE Digital Energy
Jim Bowen
Ray Luna
GE Digital Energy
Dave Allcock
GE Digital Energy
PCIC-2011-15
Best of Primer
Gary Donner
Wayne Paschall
OTI
ABB Inc.
CHEMICAL TECHNICAL SESSION I
Tuesday September 20, 2011 8:15 a.m. 11:15 a.m.
Presiding Dennis Bogh
PCIC-2011-16
Do Not Mix the Requirements of Hazardous Location Areas When You Order Motors
Bharat Mistry
William G. Lawrence
FM Approvals
PCIC-2011-17
Using Magnetic Flux Monitoring to Detect Synchronous Machine Rotor Winding Shorts
Mladen Sasic
Iris Power LP
Greg Stone
Iris Power LP
Chris Stinson
Air Liquide
Jan Stein
Electric Power Research Institute
PCIC-2011-18
Electric Motor Storage: Protecting Your Investment
Robbie McElveen
ABB/Baldor
Joe Hillhouse.
ABB/Baldor
Kyle Miller
Chevron Products Company
ELECTROCHEMICAL TECHNICAL SESSION I
Sheraton Centre Toronto Civic South
Presiding Dennis Cochran
PCIC-2011-19
Monitoring Technologies for Large Power Transformers
Claude Kane
Dynamic Ratings, Inc.
PCIC-2011-20
PWM Drive Overvoltage Trips in Electrochemical Plants
Paul Buddingh
Andritz Automation Ltd.
Jack St. Mars
CANEXUS Chemicals Canada Inc.
PCIC-2011-21
Accurate Determination of Losses in a High Current Controlled Transformer-Rectifiers System for Copper
Electrochemical Plants
Ricardo Fuentes
IDT Company
Jorge Estrada
IDT Company
Gerardo Pacheco
IDT Company
Page 23
INTERNATIONAL TECHNICAL SESSION I
Sheraton Centre Toronto Civic North
Presiding Horst Kuemmlee
PCIC-2011-22
Applying IEC 60909, Short-Circuit Current Calculations
Dr. David Sweeting
Sweeting Consulting
PCIC-2011-23
The Power of IEC 61850 for Bus Transfer and Load Shedding Applications
Lubomir Sevov
GE Digital Energy - Multilin
Tony Zhao
Powell Industries
Ilia Voloh
GE Digital Energy - Multilin
PCIC-2011 24
Classification of Hazardous Areas Produced By Maintenance Interventions on N.G. Distribution Networks and
in Presence of Open Surface Of Flammable Liquid
Riccardo Tommasini
Politecnico di Torino
Enrico Pons
Politecnico di Torino
SAFETY TECHNICAL SESSION
Sheraton Centre Toronto Dominion North Presiding Paul B. Sullivan
PCIC-2011-25
Arc-Flash Protection for Low and Medium
Geraldo Rocha
Eduardo Zanirato
Fernando Ayello
Roberto Taninaga
Voltage Panels
Schweitzer Engineering Labs.
Schweitzer Engineering Labs
PCIC-2011-26
Arc Flash Calculations Using a Physics Based Circuit Model
Thomas Papallo
G.E. Industrial Solutions
PCIC-2011-27
Controlling Electrical Hazards through Effective Risk Management
Dennis K. Neitzel
AVO Training Institute, Inc.
TRANSPORTATION TECHNICAL SESSION I
Sheraton Centre Toronto Dominion South Presiding Richard Paes
PCIC-2011-28
Understanding of Induction Motors Made Easy
Harry Li
Siemens Industry Inc.
Dr. Radu Curiac
PCIC-2011-29
Determining Available Fault Current Based on Motor Starting Characteristics
Mark Fisher
3rd Generation Engineering, Inc.
Ryan Downey
3rd Generation Engineering, Inc.
Scot Tomlinson
Magellan Midstream Partners, LLP
James Babcock
SKM Systems Analysis, Inc.
PCIC-2011-30
Using Multi-Stress Aging Test to Evaluate and Improve Medium-Voltage Stator Insulation for Adjustable Speed
Drive Applications
William Chen
TECO-Westinghouse Motor Company
George Gao
TECO-Westinghouse Motor Company
Page 24
CHEMICAL TECHNICAL SESSION II
Wednesday September 21, 2011 8:15 a.m. 11:15 a.m.
Sheraton Centre Toronto Dominion South Presiding John Malinowski
PCIC-2011-31
Considering Process Temperatures When Designing Electrical Heat Tracing for Hazardous Areas
Satish Parikh
URS Corporation
Michael J. Sustarich
Hemlock Semiconductor
Richard H. Hulett
Thermon Manufacturing
Eric Reitler
Thermon Manufacturing
PCIC-2011-32
Modernization of Legacy Adjustable Speed Drives Brings New Life to High Capacity Systems
Stephan A. Bondy
TMEIC GE
Doug Phares
TMEIC GE
Barry Dick
TMEIC GE
Manish Verma
TMEIC GE
PCIC-2011-33
Field Evaluation of Automatic Restart of Essential Motors Using Microprocessor-Based Protective Relays
Rekha T Jagaduri
Schweitzer Engineering Laboratories, Inc.
Dennis Bradley
Schweitzer Engineering Laboratories, Inc.
Larry Kingrey
WorleyParsons
Tuyen Nguyen
Chevron Energy Technology Company
ELECTROCHEMICAL TECHNICAL SESSION II
8:15 a.m. 11:15 a.m.
Presiding Janet Flores
PCIC-2011-34
Your Dog Didn't Eat Your Homework, and Lightning Didn t Kill That Motor
Chuck Yung
EASA
Jim Bryan
EASA
PCIC-2011-35
Method for Line-Ground Fault Detection in Variable Frequency Drives
Carlos D. Rodríguez-Valdez
Rockwell Automation
Rangarajan M. Tallam
Rockwell Automation
Russ J. Kerkman
Rockwell Automation
PCIC-2011-36
How Safe is the Insulation System of Rotating Machines Operating in Gas Groups B, C & D?
Saeed Ul Haq
GE Energy
Bharat Mistry
GE Energy
Ramtin Omranipour
GE Energy
INTERNATIONAL TECHNICAL SESSION II
Sheraton Centre Toronto Dominion North Presiding Bill Lockley
PCIC-2011 - 37
Interfaces between MV and LV Assemblies and Power Generation Facilities in Petrochemical Plants
Brazilian Experience
Luiz Felipe O. Costa
Eaton
Rogerio C. Barros
Eaton
A
Page 25
PCIC-2011 - 38
High Efficiency Heating Method for Subsea Pipelines Heating
Philippe Angays
Technip
PCIC-2011 - 39
The Influence of Offshore and Shipboard Cables Standardization on Platform Construction Guidelines and
Local Market.
Thiago Trezza Borges
Petrobras
Waldir de Melo Mota Junior
Petrobras
Michael da Fonseca Pinheiro
Petrobras
TRANSPORTATION TECHNICAL SESSION II
Presiding John Rama
PCIC-2011 - 40
NETA Maintenance Testing Research on Electrical Power System Equipment Performance
Kerry Heid
Magna Electric
Ron Widup
Shermco Industries
PCIC-2011 - 41
Electric Rotating Machine Standards - Part II: Magnetic Wedge Design & Monitoring Methods
Stephen Cary
Eaton Corporation
Jon Hanson
Goodyear Chemical
Chip Evans
API
Igor Blokhintsev
Eaton Corporation
PCIC-2011 - 42
Improvements in Energy Efficiency of Induction Motors by the Use of Magnetic Wedges
Harry Li
Dr. Radu Curiac
MARINE TECHNICAL SESSION II
Wednesday September 21, 2011 2:00 p.m. 5:00 p.m.
Sheraton Centre Toronto Dominion South Presiding Darrell Broussard
PCIC-2011 - 43
Maximal Protection: Lowering Incident Energy and Arc Blast Elements by Minimizing Arcing Time
Lauri Kumpulainen
Vamp LTD.
John Kay
Rockwell Automation
Mohammad Aurangzeb
Schneider Electric
PCIC-2011 - 44
Fire Rated Cables Standards Development - Update
Gil Shoshani
Rockbestos Cable
Richard Loiselle
Suncor Energy
Blair McGrath
Tyco Thermal Controls
Marshall Sharp
Southwest Research Institute
PCIC-2011 - 45
Application of Artificial Intelligence to Real-time Fault Detection in Permanent Magnet Synchronous Motors
David Cartes
Florida State University
Yaw Nyanteh
Chris Edrington
Sanjeev Srivastava
Page 26
PRODUCTION TECHNICAL SESSION II
Presiding Mike Harbison
PCIC-2011 - 46
New Technology Assists the Design of Outdoor Rated Medium Voltage Drives
Kurt LeDoux
Toshiba International
Frank Haydock
Adun Ige
Schlumberger
John Kleinecke
PCIC-2011 - 47
Making Peace with Communications Networks: What Power Engineers Need to Know About Modern and
Future Network Communication for Plants and Substations
Nicholas Seeley
Kurt Concienne
Chevron
PCIC-2011 - 48
Mineral Insulated Heating Cable Sheath Temperature Test Methods and Design Optimization Techniques
Blair McGrath
George Brady
Syncrude Canada
Ron Derworiz
Shell Canada Energy
Ron Jurchuk
Richard Loiselle
Suncor
Sudhir Thorat
REFINING TECHNICAL SESSION II
Presiding Ron Busse
PCIC-2011 - 49
Increase the Capacity of a 12 kV/4.16 kV Secondary Selective Substation at Large Refinery, Design,
Implementation and Commissioning
Roderick R. Ramirez
ExxonMobil
Paul Gaynor
ExxonMobil
Tyson Ritter
ExxonMobil
Greg Johnson
ExxonMobil
Steven Sauer
Burns & McDonnell
PCIC-2011 - 50
Considerations in Applying Arc Resistant Low Voltage Motor Control Centers in Refining Environments
Rachel Bugaris
Rockwell Automation
Nicholas Weber
BP Products North America
PCIC-2011 - 51
Advanced Cable Diagnostics Evaluation, Selection, Application and Experience on Medium Voltage Shielded
Power Cables at a Petrochemical Facility
Dan W. Eaton
Eaton Electrical Engineering
Craig S. Schiro, Jr.
Marathon Petroleum Co.
Terry W. Perilloux
Marathon Petroleum Co.
Craig Goodwin
HV Diagnostics, Inc.
Page 27
59th Annual PCIC Technical Conference
New Orleans, LA September 24-26, 2012
CALL FOR PAPERS
The premier international forum for the exchange of electrical technology
applications for the petroleum and chemical industries
www.ieee-pcic.org
Call for Papers
http://www.ieee-pcic.org/2012CallforPapers.pdf
The PCIC is the premier conference for practicing electrical engineers and other professionals that deal with electrical
installations in the petrochemical industry and is highly regarded for providing high quality papers on a variety of relevant
subjects.
Papers are requested on topics related to the practical application of electrical technology, standards, equipment and systems
of interest in the petroleum and chemical industries within the scope of the PCIC Technical Subcommittees. All papers
presented are subjected to thorough peer review and published in the conference record. Papers are also evaluated for
subsequent publication in either the IEEE Transactions on Industry Applications or Industry Applications Magazine.
At least one author must register and attend the conference to present their paper. Any additional authors attending the
conference or assisting in the paper presentation must also be registered for the conference. The proposals will be reviewed
and selected during the 2011 PCIC Technical Conference, September 19-21, 2011 in Toronto, ON Canada.
Submission Deadlines:
Authors submit proposals to General Program Chair
PCIC notifies authors of acceptance status
Authors submit working drafts for Technical Review
Authors submit finished manuscripts
September 4, 2011
October 8, 2011
November 30, 2011
April 15, 2012
To Submit a Proposal: (ONLY Electronic Submission by the web based submittal process will be accepted)
Go to the following website: http://www.ewh.ieee.org/soc/ias/pcic/pcic_abstract_submit.php
The following information must be included with the paper proposal:
1. Fill out all pertinent information on the page (Fields in Red are required).
2. Up to four authors are to be entered per paper.
3. The email address for the primary author must be valid because it will be confirmed.
4. Once abstract has been submitted an email will be sent to confirm primary author's email address.
5. If this email is blocked by your email client, please contact Rosa Gardine at 303-431-7895 or [email protected].
6. This email will also have a link to edit your paper.
7. Important Notice: An acknowledgement will be sent to confirm receipt of all proposals, if you do not receive
communications from Donald G. Dunn, please contact him via telephone. (for contact details see next page)
For more information, please go to the IEEE IAS PCIC website. http://www.ieee-pcic.org/
(Continued on next page)
Page 28
Prospective authors are invited and encouraged to attend the General Program Subcommittee meeting on Sunday, September
18, 2011 at 1:00 p.m. in Civic Ballroom at the Sheraton Centre in Toronto Canada to speak about and support their proposed
paper to the membership.
For Further Information Contact:
Donald G. Dunn
PCIC 2011-2012 Vice Chair and General Program Chair
9009 West Loop South
Houston, TX 77096
Phone: 713-432-8588
Email: [email protected] or [email protected]
PCIC On-line Surveys
PCIC encourages feedback from the attendees to ensure that the Conference remains one of the best conferences sponsored
by the IAS and IEEE. After the conference please go to the http://www.ieee-pcic.org/Conferences/2011_Toronto/index.html
to participate in the PCIC on-line surveys. There will be links to four surveys as follows:
General Survey
Authors Survey
Guest Survey
First Time Attendees Survey
You only need to fill out one of the surveys so pick the one that is most appropriate.
Page 29
2011 PCIC Conference Tutorials
The Tutorial Subcommittee of the PCIC Technical Conference is sponsoring six half-day tutorials on Thursday, September
22, 2011. Continuing education units, (0.4 CEU) will be awarded to each participant who successfully completes a course
and submits the required CEU form. Light refreshments will be provided during the sessions. A lunch will be provided
between the morning and afternoon sessions, (12:00 Noon to 1:00 p.m.) for all tutorial registrants. The price of lunch is
included in the price of the tutorial, so plan to end your morning session or begin your afternoon session by having lunch
with your fellow attendees.
The cost of one tutorial will be waived for any first-time PCIC conference attendee. This must be indicated on the
registration form and completed prior to September 1st otherwise the full tutorial fee will apply. (NOTE: Those who do not
pre-register will be charged full price at the door. This policy has been implemented to ensure there are enough handout
materials for all participants.)
2011 Tutorial A
(8:00 a.m.
Noon)
NFPA 70E -2012 is here! What are the changes and how will they impact my facility? (Part 1)
Abstract: NFPA 70E-2012 Standard for Electrical Safety in the Workplace has been issued. NFPA 70 E has undergone
considerable revisions, modifications and changes
OSHA sub part S is based on NFPA 70E and OSHA historically requires compliance with NFPA 70E for abatement. This
two part tutorial will cover discussions of major performance related requirements in OSHA SubPart S and how to meet
these requirements using NFPA 70E.Tutorial will also cover safety related maintenance requirements for electrical
equipment.
The second part of the tutorial will cover key changes in NFPA 70E- 2012, rationale for these changes and possible impact
on the users. After completion of this two part 8 hour tutorial, attendees will be familiar with the contents of NFPA 70E2012 and how to find the information they may need to optimize electrical safety at their facility.
Instructors: Daleep Mohla/ DCM Electrical Consulting, Daryld Ray Crow/ DRC Consulting, James White/Shermco
Corporation, Lanny Floyd/DuPont
(Authors are members of NFPA 70E technical committee and long time practitioners of electrical safety)
2011 Tutorial B
(8:00 a.m.
LV Motor and ASD application Seminar -- Applying off the shelf ASDs and Motors
Abstract: The purpose of the seminar is to understand the basics of how an induction motor works with an ASD
Planned Agenda
Motor Basics
Starting Inrush and Consequences
Slip / NEMA Motor Speed Torque Curves
Torque & Horsepower
Pros and Cons of Reduced Voltage Motor Starting Why is an ASD a better soft starter.
Adjustable Speed Drives
How They Work
Things To Be Aware Of: Dynamic Breaking, Long Lead Lengths, Bearing Issues and Harmonics
Load Types: Variable Torque, Constant Torque and Constant Horsepower.
Energy Savings
Features: PID, Vector Control, drooping/load sharing, logic, etc.
Noon)
Page 30
Instructor: Tom Stewart, Toshiba International Corp.
2011 Tutorial C
(8:00 a.m.
Noon)
Protection of Medium Voltage Transformers at Industrial Facilities
Abstract: The tutorial will cover the basics of protecting medium voltage industrial transformers as discussed in IEEE/ANSI
standard C37.91 (Guide for Protective Relay Applications for Power Transformers) and the IAS Buff Book (IEEE Standard
242-2001). It will also address new protection techniques made possible by modern digital transformer relays. Topics
covered will include: transformer basics, why transformers fail, polarity and phasing standards (ANSI and IEC), IEEE
through fault withstand capability standards, de-mystifying wye-delta and delta-wye phase shifts, fuse/overcurrent/
differential protection, CT requirements, slope, harmonic restraint, over excitation limits and protection methods,
commissioning and relay testing, application of fault pressure relays. The tutorial highlights the protection of transformers
grounded through 200-400A grounding resistors a common practice at industrial facilities requiring sensitive ground
differential protection. Case studies of actual in-service events will also be discussed.
Instructor: Chuck Mozina - Beckwith Electric
2011 Tutorial D
(1:00 p.m.
5:00 p.m.)
2011 Tutorial D
NFPA 70E -2012 is here! What are the changes and how will they impact my facility? (Part 2)
Abstract: NFPA 70E-2012 Standard for Electrical Safety in the Workplace has been issued. NFPA 70 E has undergone
considerable revisions, modifications and changes
OSHA sub part S is based on NFPA 70E and OSHA historically requires compliance with NFPA 70E for abatement. This
two part tutorial will cover discussions of major performance related requirements in OSHA SubPart S and how to meet
these requirements using NFPA 70E.Tutorial will also cover safety related maintenance requirements for electrical
equipment.
The second part of the tutorial will cover key changes in NFPA 70E- 2012, rationale for these changes and possible impact
on the users. After completion of this two part 8 hour tutorial, attendees will be familiar with the contents of NFPA 70E2012 and how to find the information they may need to optimize electrical safety at their facility.
Instructors: Daleep Mohla/ DCM Electrical Consulting, Daryld Ray Crow/ DRC Consulting, James White/Shermco
Corporation, Lanny Floyd/DuPont
(Authors are members of NFPA 70E technical committee and long time practitioners of electrical safety)
2011 Tutorial E
(1:00 p.m.
5:00 p.m.)
Protection applications of large induction and synchronous motors using microprocessor based motor protection
relays
Abstract: This tutorial develops and discusses motor relay protection element settings recommendations (including thermal
protection) for an example induction motor, brushless synchronous motor, and large induction machine with a high-inertia
load. The tutorial emphasis is on large induction and brushless synchronous motors. The protection recommendations are
based on IEEE Standard C37.96 (Guide for AC Motor Protection), IEEE Standard 242 (IEEE Recommended Practice for
Protection and Coordination of Industrial and Commercial Power Systems), and Stanley Zocholl's book AC Motor
Page 31
Protection. The tutorial focuses on developing motor relay protection element settings that improve the security and
dependability of the protection scheme.
Instructor: Derrick Haas SEL, Rogerio Scharlach - SEL
2011 Tutorial F
(1:00 p.m.
5:00 p.m.)
Battery & Charger 101 Goals and Synopsis
Abstract: Introduce attendees to the most popular Lead-Acid battery technologies available today. Familiarize attendees
with basic battery chemistry and construction. Present attendees the advantages and disadvantages of each Lead-Acid
technology. Review of the most common battery failure mechanisms and what can be done to predict them and minimize
their occurrence. Introduce attendees to the 4 most popular charger technologies on the market today. Summarize the
advantages and disadvantages of each charger technology. Analyze charger failure modes and the various tools available to
predict, annunciate and react to these failures. Review modern charger features...What is new on the market?
Synopsis
Lead-Acid batteries
Basic chemistry.
Electrochemistry of the charge-discharge cycle.
Available plate types and their applications.
Alloys and their impact on performance.
Valve regulated batteries:
Absorbed electrolyte
Gel
Maintenance recommendations
Maintenance Do s and Do not s
Capacity What does this really means?
Does this battery fit this application?
What the market has to offer
Failure mechanisms
Flooded lead-Acid
Valve regulated Lead-acid
Modern chargers
Covering the basics
Extending battery life
Reducing your maintenance budget while reducing the risk of system failure.
Summary
Instructors: Haissam Nasrat, Primax Technologies Inc., Yves A. Lavoie, Primax Technologies Inc
Page 32
Tutorial Proposal Form
The Tutorial Subcommittee strives to offer a tutorial slate that will appeal to a cross-section of PCIC attendees depending
upon their experience, discipline and responsibilities. Tutorials are intended to help experienced engineers update or renew
their knowledge base and to accelerate development of engineers new to the profession. The tutorial program is intended to
provide all PCIC attendees with an opportunity to expand their PCIC experience, providing even more valuable as a result of
their conference participation
Any individual, group or company that is interested in presenting a tutorial subject is encouraged to fill out the form below
and submit it to the Tutorial Subcommittee by September 1, 2011. Tutorial proposals will be reviewed at the general program
this year to test the interest of the audience. Final selection of Tutorial programs for the 2012 Conference will follow, with
notification of authors no later than October 2, 2011.
1. Title of Tutorial: ___________________________________________________________________________
2. Abstract: _________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
3. Lead Instructor:
Name: ______________________________________________________________
Title: _______________________________________________________________
Company: ___________________________________________________________
Street Address: _______________________________________________________
City/State/Zip Code: ___________________________________________________
Telephone: ___________________________________________________________
Email: ______________________________________________________________
4. Other Instructors (Name/Company) ____________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
Send To:
Richard Holub - Chair, PCIC Tutorial Subcommittee
DuPont Company
3454 Brandywine Building
1007 Market Street,
Wilmington, DE 19898
Email:
[email protected]
Telephone: 302 774-4915
Facsimile: 302 774-4937
Page 33
Guest Activities
Saturday, September 17, 2011
Tour #1 The Beauty of Niagara Falls
8:00 AM 4:30 PM
$130.00
We will board a motor coach with a certified tour guide for our journey to one of the natural wonders of the world. In visiting
Ontario, Niagara Falls is a must-see destination! Our fully commentated tour will introduce you to Niagara s beautiful
landscape and history. Travelling towards Niagara, around the western perimeter of Lake Ontario, the beautiful Niagara
Escarpment will come into view. The sheltering ridge is the reason for the area s productive vineyards and fruit orchards
yielding some of the world s finest wine, jam and fruit nectars.
Since the early 1820 s, millions of visitors have been attracted to Niagara Falls. We will board the historical world famous
Maid of the Mist and view this natural phenomenon from a close-up vantage point. The tour will cruise right to the base of
the American Falls where the group will hear the thunder of the rocks and feel a cool mist on their faces. But that s only the
beginning; as the boat s powerful engine pushes into the very basin of the magnificent Horseshoe Falls. Water rushes all
around as you soak in the excitement.
Enjoy your lunch overlooking the Falls in Niagara s newly renovated Elements Restaurant. Niagara-on-the-Lake will be the
next stop; this charming town is considered to be one of the prettiest in Ontario. Take in the scenic Niagara parkway above
the Niagara Gorge as your coach winds past luxurious country homes and vineyards. Niagara-on-the-Lake is one of the
earliest British settlements in Canada. Guests will be provided with 1 hour free time to enjoy the many specialty shops and
galleries along the main street.
Lunch included, water & snack on return bus.
Monday, September 19, 2011
Tour #2 City Tour with Harbour Cruise
9:00AM 2:00 PM
$50.00
After boarding our motor coach, sit back and enjoy the sights as the city's fascinating past and vibrant present unfold. Toronto
is a city of lively neighborhoods and thousands of unique corners. Though the CN Tower is our most famous sight, the city
rewards the curious with charming secrets at every turn. It s a world within a city, and it s all worth exploring. We ll take you
through the financial district, featuring the country's tallest skyscrapers, which make up Toronto's powerful skyline. Soaring
higher than any building is the CN Tower standing at 1,815 feet. The city's large population is made up of many ethnic
groups. While they have made Toronto their home, they have also maintained the traditions and lifestyles of their ancestors.
From Chinatown to Little Italy, Cabbagetown to Forest Hill, you will be provided with an insightful commentary on the
development of these communities. No tour of Toronto's neighborhoods would be complete without seeing such landmarks
as century-old churches, our dynamic theatre district, and the fairytale castle - Casa Loma.
After the bus tour concludes enjoy a one-hour sightseeing cruise through Toronto's scenic harbor front and island parklands.
Experience a narrated tour aboard one of our classic vessels. See Toronto's breathtaking skyline and take in the sights and
sounds of the Toronto Islands, Island Airport, Harbourfront, CN Tower, Rogers Centre, Air Canada Centre and the fabled
Gibraltar Point Lighthouse.
1 hour free time will be provided for lunch, cost not included. Water on return bus.
Page 34
Tour #3 Gardiner Museum & Hands on Clay Workshop
10:00AM 1:00 PM
$75.00
Boarding our motor coach we depart for the Gardiner Museum; the only museum in Canada entirely devoted to ceramics.
Whether your interest is in contemporary work like Picasso s Large Vase with Veiled Women, Maiolica dishes from the
Italian Renaissance or 18th century European tea services, the museum has something that will interest you. The collection,
which exceeds 2,900 pieces, is often described as a jewel box of ceramic treasures . You will enjoy a 30 minute tour of the
museum followed by a hands-on clay workshop with a professional potter in the studio for 1.5 hours. The theme around the
hands on session may come from one of the current museum exhibits at the time.
No lunch included, water on return bus.
Tuesday, September 20, 2011
Tour #4 Niagara Express & Winery Stop
8:30AM 3:30 PM
$85.00
Similar to our Saturday tour, for those guests that can only visit the Falls during the conference, our motor coach will take an
express tour of the Falls & Niagara region; if you missed the Saturday tour then don t miss out on this opportunity to see one
of the natural wonders of the world. Our tour will be commentated by a certified tour guide and includes admission to Maid
of the Mist boat, so you can get up close to the Falls, free time to walk around the Falls area, driving through the stunning
Niagara-on-the-Lake region, stop at Peller Estates winery for a wine tasting and experience an introductory tour to the award
winning winery.
1 Hour free time will be provided for lunch, cost not included, water & snack on return bus.
Tour #5 City Tour with CN Tower Stop
9:30AM 1:30 PM PM
$68.00
Aboard our motor coach for our fully-commentated tour of Toronto s city centre first time visitors will be delighted by what
they see and those familiar with the city will be pleasantly surprised! Our stop will take you to the clouds to explore one of
the world's tallest freestanding structures - 1,815 ft. CN Tower. Nestled near its base is the magnificent Rogers Centre, home
to some of our excellent professional sports teams and host to incredible international shows and concerts. There is a 60second ride in the glass-faced elevators to the Observation Deck. The potential 75-mile view offers sights of the city as well
as a spectacular view across the lake and beyond Niagara Falls. Both the public and engineering experts come to marvel at
the Tower, which stands as a testament to human ingenuity and achievement.
No lunch included, water & snack on return bus.
Tour #6 Explore the Distillery District & Chocolate Tasting
10:00AM 2:00 PM
$90.00
Travelling by bus, guests will have the opportunity to explore one of Toronto s recently renovated and unique districts. The
Gooderham & Worts buildings were constructed between 1859 and 1928. They range from single-story brick warehouses
with dirt floors, to fanciful structures with charming dormer windows, shutters and belvederes. The complex was designated
a national historic site in 1990 when the distillery closed. Since 1990 the space has been closed to the public and only film
crews have had the pleasure of exploring these historic spaces. In 2003, this fabulous district underwent a massive
redevelopment project. Taking precious care to preserve the historic charm of this area, the developers created a chic and
inviting entertainment district that focuses on art and culture. You will enjoy exploring the many galleries, retail shops and
restaurants within the district. We ll visit Soma Chocolatier offering local artisanal chocolates and enjoy a tour and tasting of
this unique chocolate factory and see first hand the process behind their exquisite chocolates. Leisure time in the distillery
district will be provided.
Lunch & Gift Included (Sponsored by 3M), Chocolate Tasting at SOMA.
Page 35
Wednesday, September 21, 2011
Tour #7 Casa Loma & Campbell House
9:00 AM 1:00 PM
$65.00
Departing by coach we drive to Casa Loma, Canada s most famous medieval-style castle is situated in the heart of mid-town
Toronto. You will take a self-guided audio tour through the former estate of Sir Henry Pellatt, a prominent Toronto
financier, industrialist and military man. The castle has ninety-eight rooms, a shooting gallery, vast wine cellars, and an
underground passageway leading to a stable much bigger than most Toronto mansions. The castle also features Canada s
largest Wurlitzer pipe organ- larger than the organs in many cathedrals. Participants can climb up to the turrets for a bird s
eye view of Toronto city centre; this House on the Hill is a must-see during your visit to Toronto.
Campbell House is one of Toronto s unique landmarks. It is the oldest remaining building from the original town of York.
Take our guided tour of the Campbell family home, a classic example of the Georgian architecture and learn about the
lifestyle of this family in the 1820 s. The tour will also discuss the town of York at the time.
No lunch included.
Tour #8 Garden Tour
9:30 AM 1:30 PM
$85.00
Spend the afternoon enjoying the sights and sounds of the city s wonderful green spaces. The City of Toronto is committed to
helping build the culture of green infrastructure in Ontario and is well known for improving local communities and quality of
life with its award-winning showcase gardens, urban forests, parks, and attractions. Begin your garden tour with a visit to the
Botanical Garden. From the moment you arrive at the LEED certified, environmentally-designed glass pavilion you will
enjoy healthy and beautiful surroundings, indoors and out. A boxed lunch is offered before a walking tour of the specialty
gardens. In a series of 12 contemporary themed gardens, spanning nearly four acres, unique green spaces have been designed
to showcase the splendor of nature while reflecting the scale of a typical urban setting. A teaching garden, a green roof
garden, and the Woodland Walk are just a few of the highlights. Also part of the site is Edwards Gardens, a former estate
garden, featuring perennials and roses and wildflowers, plus a valley garden of rhododendrons, streams and rockery.
Discover the history behind this beautiful Toronto Park and how a 150 year old legacy became "Edwards Gardens".
Boxed Lunch included, water on return bus, average level of fitness required (walking & some stairs).
Tour #9 Royal Ontario Museum & Yorkville
10:00 AM 3:00 PM
$85.00
You will enjoy a guided tour at Toronto s Royal Ontario Museum. The Museum's vast collection of over 6 million artifacts
and specimens rotates through permanent and temporary galleries unraveling the past, illuminating the present and pointing
us toward the future. The ROM has recently undergone extensive renovations. Daniel Libeskind has created a crystal design
for the ROM featuring a stunning structure of interlocking prismatic forms. This renaissance has transformed the museum
into a luminous public space, with expanded galleries, and outstanding vantage points for visitors. The ROM features
numerous galleries & unlike any other museum in the country, the ROM provides you with an opportunity to explore the
entire history of civilization. You will enjoy an architectural tour of the ROM. This tour will take you from the timeless
architecture of the Chinese palace to the ultra modern Michael Lee-Chin Crystal. Experience the Museum s spectacular
collections from textiles to dinosaurs while discovering the ROM s impressive architecture.
Back aboard our coach we will depart for Yorkville; developers have spent millions transforming the Victorian-Gothic
houses of Yorkville into prime commercial space. Cumberland Street has wall-to-wall boutiques and two interesting
passageways connecting it to Yorkville Avenue. Yorkville Avenue has chic boutiques, Hazelton Avenue has some of the
city's most prestigious art galleries, and Scollard Street is a street filled with galleries, and antique stores. Leisure time will be
provided for guests to enjoy the Yorkville area.
1 Hour free time will be provided for lunch in Yorkville, cost not included, water on return bus.
Page 36
Fifty-Eighth Annual Technical Conference of the
Petroleum and Chemical Industry Committee
IEEE PCIC 2011 Toronto, Ontario Canada September 19 21, 2011
Registration Procedure - PLEASE REGISTER EARLY!!
1.
All attendees must reserve hotel rooms directly with the Conference hotel(s). Hotel reservations should be made PRIOR
TO registering for the conference as registration fees are higher for those not staying at the Conference hotels. The
hotel websites can be accessed at http://www.starwoodmeeting.com/StarGroupsWeb/res?id=1102182080&key=4A85D
or through the link on the 2011 PCIC Toronto website. Alternately, the hotel will accept phone reservations be sure to
quote the IEEE-PCIC Conference to obtain the correct rate.
2.
To receive the special conference rate of CAD$229.00 per night for a standard room or CAD$259.00 for Club Level, you
must book prior to August 21, 2011. (Single or double occupancy only.. Additional persons are charged of $30.00)
3.
Once hotel reservations are made, be sure to record the hotel confirmation number. Conference registration can be easily
completed on-line at www.ieee-pcic.org; select Conferences, 2011 Toronto, and then On-Line Registration. When
registering for the conference a valid hotel confirmation number is required or the additional fee in Note 5 will apply.
4.
For conference registration by mail, courier, or fax, use the registration form in this program booklet or go on-line as
described in #2 above and print a copy of the registration form. Be sure to make hotel reservations first using the above
Group Code. Record the hotel confirmation number, and then register for the conference using the printed form, which
contains directions for mail, courier, or fax submission. When registering for the conference a valid hotel confirmation
number is required or the additional fee in Note 5 will apply.
5.
When registering for the conference a valid hotel confirmation number is required or an additional US$200 fee will
apply. No after-the-fact rebates will be issued.
Payment:
1. The following credit cards may be used for payment: MasterCard, Visa, or American Express. Check or money order
should be made out to: 2011 IEEE PCIC TORONTO CONFERENCE
2.
All registration fees for the conference are in US dollars.
3.
Conference registrations received no later than July 1, 2011 will be at the early bird rate conference rate. Conference
registrations received after this date, but no later than September 9, 2011 will be at the regular conference rates.
Conference registrations received after September 9, 2011 will be charged the at conference rate.
4.
The cutoff for hotel reservations at the PCIC Rate is August 21, 2011. After this date, the special conference rate is not
guaranteed.
5.
All requests for registration changes, additions, deletions, or cancellations must be made either by email from the on-line
registration website or direct to MicroSpec by fax (1-888-780-0663 or 416-780-0290), or by phone (1-888-780-9825 or
416-780-9825 ext 0). Changes, additions, and deletions will be accommodated whenever possible. Cancellation
received on or before June 21, 2011 will receive a full refund less a US$50 service fee. Cancellations received between
June 22, 2011 and August 21, 2011 will receive a 50% refund less a US$50 service fee. Cancellation received after
August 21, 2011 will not receive a refund. Conference CD will be mailed to registrant for cancellations after August 21,
2011. Refunds will be applied to original method of payment.
Page 37
9th Annual PCIC-Europe Conference, 19th-21st June 2012 Prague, Czech Republic
The Petroleum and Chemical Industry Committee Europe is organizing its 9th annual conference in Prague, Czech Republic
on 19-21 June 2012. The Golden City, the City of the one thousand spires, Prague has a lot attraction to offer.
Built by Europe s finest architects and artists over the course of 600 years, it teems with
magnificent places of historical interest. Have a stroll in the Old Town with its cobbled
streets, along the right bank of the Vlatva River, and wonder at the beauty of the Old
Town Square, with its Town Hall and astronomical clock whose moving characters are a
very popular attraction.
Enjoy the variety of the brightly colored façades, encompassing all styles of architecture, from
Gothic, Romanesque and Baroque to Art Nouveau. The right bank is also home of the melancholy
Jewish Quarter with the oldest synagogue in the world. Spanning the Vltava River and connecting
the Old Town and Prague Castle is the stunning Charles Bridge, flanked by giant stone statues.
Bustling with musicians and artists in daytime, it is all lit up and enticing at night.
Across the river stands the stately Prague Castle and the Royal
Gardens, It will take your breath away with its palace, monastery
and Saint Vitus Cathedral where Czech kings used to be crowned.
Enjoy the lively atmosphere at
shopping spree in the Old
case, Prague will put a spell on
Wenceslas Square, have a cruise on the river, or a
Town, or visit the rich collections of the museums, in any
you !
For details regarding PCIC Europe conferences, please go to our website www.pcic-europe.eu.
Welcome to Prague!

Table of Contents - IEEE Entity Web Hosting

Transcription

Similar documents

2016 IEEE/IAS-PCIC Conference Call for Papers

Movato Kitchen Issue 2016

Porpidex 2011 User Group Program

Toronto,Canada Toronto,Canada - Toronto District School Board

Working with the Media

Conseil scolaire Viamonde?

Bob Rae-Levine: Confirm or Deny

Smile Resorts

word from the director of business development

magazine-awards.com - National Magazine Awards

Medieval Times