weha flap diamond cup wheels

WEHA BLITZ CORE BITS Weha High Speed Diamond Core bits are designed for granite, marble,
quartzite, quarts, engineered stone, concrete counter tops, and all natural stone. With diamonds both inside
and outside the barrel to reduce drag, heat, and friction, along with high diamond content segments, the Weha
dry diamond core bits will drill holes in 3cm granite in less than 30 seconds. The Weha High Speed Diamond
Core Bits are built to be the best dry diamond core bit for granite and engineered stone counter top faucet hole
drilling. But they can also be used wet with Air Polishers in shop applications.
7606 Whitehall Executive Center Dr. • Suite 400
Charlotte, NC 28273
Weha Blitz 1” High Speed Dry Core Bit #20136
Weha Blitz 1 1/4” High Speed Dry Core Bit #20137
Weha Blitz 1 3/8” High Speed Dry Core Bit #20138
Weha Blitz 1 1/2” High Speed Dry Core Bit #20139
Weha Blitz 1 3/4” High Speed Dry Core Bit #20140
Weha Blitz 2” High Speed Dry Core Bit #20139
WEHA WHITE LION
QUARTZITE DIAMOND
BRIDGE SAW BLADES
WEHA 3 STEP HYBRID DIAMOND POLISHING PADS
Outstanding in Quartzite, Granite, and
Engineered Stone. German Silent core Steel to run
quite and smooth. With a patented diamond segment
design to increase cutting speed by 35%. The Segment
is the Layered ARIX technology to give high diamond
concentration and continuous diamond contact with the
stone. The bond matrix is specifically for granite and
quartz engineered stone.
14” x 20mm x 60mm White Lion Blade #128903
16” x 20mm x 60mm White Lion Blade #128904
18” x 20mm x 60mm White Lion Blade #128906
20” x 20mm x 60mm White Lion Blade #128908
24” x 20mm x 60mm White Lion Blade #128909
$62.00
$64.00
$66.00
$69.00
$72.00
$74.00
The quality of the Weha 3 Step Hybrid diamond polishing pad system
is changing the way fabrication shops are operating. The Technology
developed behind these 3 step diamond polishing pads is truly an
advancement that will change the fabrication process. In a 3 step
diamond polishing pad system, quality and the price will truly set the pads
apart. Cheap simply will not work.
4” Weha 3 Step Hybrid Diamond Polish Pads/Set of 3
4” Weha 3 Step Hybrid Diamond Polish Pads/Step 1
4” Weha 3 Step Hybrid Diamond Polish Pads/Step 2
4” Weha 3 Step Hybrid Diamond Polish Pads/Step 3
$245.00
$268.00
$349.00
$438.00
$699.00
#13350SET
#13351
#13352
#13353
$82.00
$27.50
$27.50
$27.50
MATRIX CNC FINGER BITS The Weha Matrix 7 Segment CNC High Speed Finger Bit
www.wehausa.com
Contact your local distributor and request Weha materials.
Would you like to become a Weha Distributor? Please contact us.
WEHA FLAP DIAMOND CUP WHEELS
Weha Flap Diamond Cup Wheels are an outstanding aluminum
backed diamond cup wheel for shaping and polishing granite, marble, engineered stone, quartzite, ceramic, porcelain,
and other materials.
The Weha Diamond Flap Discs have been fully tested on Cosentino Dekton, Breton Lapitec, Marble, Granite, Engineered
Stone, Quartz materials, Concrete counter tops. They are perfectly balanced with zero vibration and will not create any
chipping at all. The Weha Diamond Flap Discs are packed full of diamonds. As the diamonds wear, the layer of diamonds
under the top layer become exposed creating a brand new layer of diamonds for continued shaping and polishing.
The perfectly balance Weha Flap Diamond Cup Wheels can be used wet or dry.
is a true cnc Diamond Finger Bit powerhouse! The Weha Matrix CNC Finger Bit allows optimum
performance, speed, and finish from the CNC machine.The 7 segment slanted/swirl design of the
Weha Matrix High Speed CNC Finger Bit ensures 100% constant contact with the stone and its
cutting. The Weha Matrix Diamond Finger Bit will provide up to 600 linear feet of performance.
Designed for all granites, engineered stones, and Quartz materials.
Weha Matrix 22mm x 35mm x 7 segment CNC High Speed Finger Bit #51050
Weha Matrix 22mm x 40mm x 7 segment CNC High Speed Finger Bit #51054
Weha Matrix 22mm x 50mm x 7 segment CNC High Speed Finger Bit #51055
$95.00
$104.00
$112.00
QB9 AIR POLISHER The Weha QB9 Rear Exhaust Center Water Feed Granite Air Polisher
is a premium quality air polisher designed to work in granite shops 24 hours a day, 7 days a
week. The QB9 Granite Air polisher is a Rear Exhaust Air polisher that does not lose power
during the granite and stone polishing process. The QB9 Center Water Feed stone
polisher comes with 2 hoses. 1 for air. 1 for water. Both feed from the back of the
tool. Lightweight for all day use. Perfect polishing speed for wet and dry polishing.
QB9 Rear Exhaust Center Water Feed Air Polisher #130732
$299.95
Please visit our newly redesigned website for
more product information, informative videos,
new product updates and special deals.
4” Flap Diamond Cup Wheel
60 Grit - #7650 $41.00
4” Flap Diamond Cup Wheel
120 Grit - #7651 $41.00
4” Flap DiamondCup Wheel
200 Grit - #7651 $41.00
4” Flap Diamond Cup Wheel
400 Grit - #7651 $41.00
For a limited time we are offering
FREE SHIPPING on orders over $250
on select products!
www.wehausa.com
ACHILLI MSA 45° MITER CUTTING BRIDGE SAW
WEHA BISON SLAB RACK
The Weha Bison 10 foot Granite Slab
Rack Storage Set is the SAFEST slab storage rack on the market. Each pole
comes with its own individual angle bracket for setting the correct angle on
the poles. This reduces excess stress on the poles and takes the guess work
out of the workers hands. GALVANIZED STEEL - NO RUST - EVER Stout
Galvanized Steel Square Tubing Uprights. 60” tall to reduce slab angle
force. Internal steel reinforcement for extra stability and strength.
Maximum 3cm slabs: 60 slabs
The Achilli MSA 45° Miter Saw is specifically designed to make 45° miter
cuts for granite, marble, engineered stone, quartz, quartzite stone counter
tops, etc. Strong motor, water recycling system, variable speed control
makes this granite miter saw a must have. Extremely accurate 45° stone cutting.
Maximum 2cm slabs: 96 slabs
Weha Bison 10 Slab Storage Rack-10’ Long #8010601
$1450.00
WEHA LARGE DOUBLE SIDED A FRAME TRANSPORT CART
The Weha 8’ granite Large Double Sided Transport A Frame Racks have been rated
as the best transport A frame stone material handling equipment on the market!
Designed for granite, marble, engineered stone, quartz, soap stone, travertine, onyx,
and all other natural stone counter top and island pieces. The Weha transportation A
Frame Carts will literally last 15 years or more! Weha is rated as the best natural and
engineered stone material handling equipment on the market.
Load Capacity: 4410 lbs (2205 lbs per side)
Load Height: 60”
Length: 96”
Width: 43”
Overall Height: 68”
Weha Large Double Sided A Frame Transport Cart #8010484
$1700.00
WEHA SINGLE SIDED A FRAME CART
The Weha single-sided A frame
is excellent for install vans, box trucks, as well as for in shop use and can easily be
placed against walls for saving space. The Weha Single Sided A-Frame Cart is made of
European Hot Dipped Galvanized steel.The Weha Single Sided Transport Cart comes
with forklift receivers for easy moving.
Load Capacity: 2205 lbs
Length: 78”
Width: 26” Load
Achilli MSA 45° Miter Cutting Bridge Saw #14445
Why buy a granite radial arm machine that takes up such a large floor space just to
cut out bowls? What is the best way to cut granite sinks or marble vanity tops out?
$1030.00
WEHA COUNTER TOP WORK TABLE The Weha
Counter Top Work Table is made specifically for fabricating granite, marble,
and stone counter tops, vanities, bar tops, etc. The Weha Counter Top Work
Tables are made out of solid steel that will support 2cm, 3cm, and laminate
granite,engineered stone without any problems at all. The Weha Work Table has
a 36” center opening that allows for bowl cutouts and polishing.
Load Capacity: 882 lbs
$28,950.00
OMA ANTAREX HYDRAULIC BOWL CUTTING MACHINE
Height: 48”
Overall Height: 56”
Weha Single Sided A Frame Cart #801483
Steel frame, sandblasted and painted with epoxy-powder finish.
• Head travel on linear guides fitted with recirculating ball slides.
• Motorized head travel on X-axis with variable speed.
• 10 pneumatic pistons to secure the workpiece in place during machining.
• Worktable made of polyzene.
• Variable Speed 7.5 HP motor.
• Water recycling system
• Side extension table
TECHNICAL SPECIFICATIONS:
Length of cut: 129” (10’ 9”)
Overall Dimesions: 171” x 59 x 58”
Worktable Dimensions: 129” X 39”
Max. Diamond Blade Diameter: 14”,16”,18”
Blade Bore Size: 50 mm
Min./Max. Stone Thickness: 1mm -3” (80 mm)
Main Motor Power: R 5.5kW = 7.5HP Variable Speed Motor
Main Motor Variable Speed RPM: 700-2500 rpm
Standard Voltage 230V 3 PHASE
Dimensions of installed machine 14’2” x 74”x 69”
Weight of Saw: 2039 lbs (925kg)
Length: 80”
Weha Counter Top Work Table #8161283
Width: 20”
$495.00
WEHA YELLOW GRANITE FABRICATION SHOP CART The Weha
Yellow Stone Shop Cart is a great cart for moving stone around the shop or on the
job site. The Weha Stone Cart is excellent for moving stone from the saw to the bowl
cutter, to the work tables, and then to the truck. The Weha Shop Cart is great for storing
remnants or moving cut pieces from the shop to the remnant rack and back. The Weha
Stone Cart is made like a drywall cart but built more heavy duty to work in the granite
and stone environment.
Load Capacity: 2000 lbs
Length: 49”
Height: 48” Depth: 23”
Weha Yellow Granite Fabrication Shop Cart #1901 $235.00
76 0 6 W h i t e h a l l E x e c u t i v e C e n t e r D r. , S u i t e 4 0 0 • C h a r l o t t e , N C 2 8 2 7 3
The Oma Antarex Bowl Cutting machine will cut out a sink bowl or vanity bowl in
granite, marble, engineered stone in half the time a radial arm machine will.
At 44,000 rpm, the Oma Granite Bowl Cutter runs at 4 times the speed of radial arm machines.
Radial Arm machines use 20mm diameter diamond tips that require many passes around and
around the sink template to cut out the bowl or vanity. The Oma Antarex Bowl Cutter uses a 3/8”
(10mm) diamond finger bit that requires only 1 pass in 2cm and 3cm stone.
The Oma Antarex bowl cutting router runs at a solid 4 HP, stronger than the most popular radial
arm machines.
The Antarex granite bowl cut out system takes up virtually no foot print in the shop. While
radial arm machines require approximately 48 square feet, just for the machine, the
Antarex is completely mobile. No need to even have a dedicated work table. Using the
same work bench used to polish the bowl and edges, simply cut the bowl out on the
existing table and then polish without ever having to move the stone from the work bench.
OMA Antarex Hydraulic Bowl Cutting Machine #8003
$4,852.68
w w w. w e h a u s a . c o m • i n f o @ w e h a u s a . c o m • 1 - 8 7 7 - 315 - 4761