Artisana™ Wall End and Cap End Units

Artisana®
WALL END AND CAP END UNITS
PR OD U C T IN FOR M AT ION
Artisana® freestanding wall system
with wall ends and cap end units.
New accessories are now available for the Artisana® wall system, a design inspired by hand-worked stone. Three-sided cap
end unit and wall end units save installation time, minimize cutting and improve aesthetics, compared to other options for
ending a wall in a multiheight or 6-inch multipiece system.
Accessory Units
Cap End
Wall End**
Approximate Dimensions*
3" x 8" x 13 1/2"
6" x 8" x 11"
Approximate Weight*
21 lbs.
36 lbs.
*Product dimensions are height by face length by depth. Actual dimensions and weights may vary from these approximate values due to variations in manufacturing processes.
Specifications may change without notice. See your Anchor representative for details, color options, block dimensions and additional information.
**Wall end has three different face patterns that coordinate with wall system.
ANCHORWALL.COM
Artisana®
WALL END AND CAP END UNITS
INSTA LLAT ION GU ID E LIN E S
Cap end unit
This shaded area represents wall end units.
Every other wall end unit is cut in half.
Torpedo™ base course
End a wall without a column
End installation pattern next to a wall end unit if the wall does
not end with a column.
Cut every other wall end unit in half. Glue all units.
If a wall end unit is not available in your market, either:
l see your dealer for a template to guide cutting corner/column and wall units to finish end; or
l visit anchorwall.com for installation instructions and construction details.
Finish with cap end unit
l If a cap unit needs to be cut, cut an interior cap, not a cap end unit. Place and glue cap end to finish capping wall.
l Cap end unit may also be used for capping a corner and
for step-downs.
l Visit anchorwall.com for installation instructions and construction details.
© 2013 Anchor Wall Systems, Inc. The Artisana® wall systems are manufactured under license from Anchor Wall Systems, Inc. (AWS). The “Anchor A” and “Anchor Build Something
Beautiful” logos, “Artisana” and “Torpedo” are trademarks of AWS. The wall system blocks are covered by the AWS Limited Warranty. For a complete copy, visit your local dealer or see
anchorwall.com.
Anchor Wall Systems, Inc., 5959 Baker Road, Suite 390, Minnetonka, MN 55345.
ANCHORWALL.COM
72.3750ART.1 07/13 4015