Artisana - Agape Retaining Walls Inc

Artisana®
multiheight wall systems
P R O D U C T I N F O R M AT I O N
The Artisana® multiheight wall systems provide designers,
contractors and homeowners ideal solutions for residential and
light-commercial retaining and freestanding wall construction
where pleasing aesthetics are a key consideration. The attractive
multiheight design and rich, variegated colors offer an alternative
look to traditional retaining wall units.
The design of these easy-to-use products allows for sweeping
curves. The retaining wall system can be used in applications
ranging from curves to corners, terraces to raised patios, steps
to columns.
The freestanding wall blocks can be used for seating walls,
courtyards and patio walls. Complementary caps and column
units complete the package.
A versatile product, Artisana units can be used in a combination
of 6- and 3-inch-high units, or with 6- or 3-inch-high units alone.
anchorwall.com
Retaining wall system
• Can be used to build gravity walls up to 3 feet high, including
buried course, but excluding the cap.* Taller walls can be built
using geosynthetic reinforcement or the Anchorplex™ retaining
wall system when designed by a qualified engineer.
• Minimum outside radius, measured on the top course to the
front of the units: 4 feet**
• Minimum inside radius, measured on the base course to the
front of the units: 8 feet**
Freestanding wall system
• Can be used to build walls up to 3 feet high, including buried
course, but excluding the cap
• Minimum radius using all three units: 4 feet**
*This height assumes level backfill and clean, compacted sand or gravel and no surcharge.
**May vary depending on the installation pattern.
Artisana®
multiheight wall systems
P R O D U C T I N F O R M AT I O N
See anchorwall.com for
installation instructions.
Retaining Wall Units
6" x 16"
6" x 8"
3" x 16"
3" x 8"
Approximate Dimensions*
6" x 16" x 8"
6" x 8" x 8"
3" x 16" x 7 1/2"
3" x 8" x 7 1/2"
Approximate Weight*
52 lbs.
26 lbs.
25 lbs.
13 lbs.
Coverage
0.67 sq. ft.
0.33 sq. ft.
0.33 sq. ft.
0.17 sq. ft.
Setback/System Batter
1"/9.5°
1"/9.5°
1
/2"/9.5°
1
Freestanding Wall Units
Approximate Dimensions*
6" x 16"
Front, 6" x 16" x 11"
Back, 6" x 14" x 11"
6 x 8"
6" x 8" x 11"
6" x 6" x 11"
3" x 16"
3" x 16" x 11"
3" x 14" x 11"
3" x 8"
3" x 8" x 11"
3" x 6" x 11"
Approximate Weight*
Coverage
63 lbs.
Front, 0.67 sq. ft.
Back, 0.58 sq. ft.
27 lbs.
0.33 sq. ft.
0.25 sq. ft.
27 lbs.
0.33 sq. ft.
0.29 sq. ft.
13 lbs.
0.17 sq. ft.
0.13 sq. ft.
/2"/9.5°
*Product dimensions are height by face length by depth. Actual
dimensions and weights may vary from these approximate values due to
variations in manufacturing processes. Specifications may change without notice.
See your Anchor representative for details, color options, block dimensions and
additional information.
Accessory UnitsCapColumn/Corner
Approximate Dimensions*
Front, 3" x 8" x 13 /2"
Back, 3" x 7" x 131/2"
6" x 16" x 8"
6" x 16" x 8"
Approximate Weight*
22 lbs.
67 lbs.
Coverage
0.63 lin. ft.
1.00 sq. ft.
anchorwall.com
1
© 2011 Anchor Wall Systems, Inc. The Artisana® wall systems are manufactured
under license from Anchor Wall Systems, Inc. (AWS). The “Anchor A” and
“Anchor Build Something Beautiful” logos, “Anchorplex” and “Artisana” are
trademarks of AWS. The wall system blocks are covered by the AWS Limited
Warranty. For a complete copy, visit your local dealer or see anchorwall.com.
Anchor Wall Systems, Inc., 5959 Baker Road, Suite 390, Minnetonka, MN 55345.
A&B0810
72.3041.1 08/11 4015