2013 Master Product Catalogue

Transcription

7-2, SUEHIROCHO 1-CHOME, OHME, TOKYO, 198-8760, JAPAN
PHONE : (81)-428-32-6118 FAX : (81)-428-32-6145
Email : [email protected]
[email protected]
www.yamabiko-corp.co.jp/shindaiwa-global/
Specifications, descriptions, and illustrative materials in this literature are as accurate as known at the time of publication, but are subject to change without notice.
Illustrations may include optional equipment and accessories, and may not include all standard equipment.
©2013 YAMABIKO Corporation All Rights Reserved
The World's Best
in Traditional and Innovative Technology
1
Japan Technology consists
of three core competencies
Advanced
Technology
Yamabiko Corporation is famous for our many
“world’s first” innovations over the years. It started
with the first backpack brushcutter in 1960 and has
continued ever since. Our focus is on developing
world class products which are known for their
light weight, power and maneuverability. Recently,
global markets have begun demanding products
with lower exhaust emissions. We have used our
technological capabilities to become the global
leader in the development of reduced emissions
engines.
2
Vertical
Integration and
In-House
Manufacturing
Our production philosophy is based on vertical
integration, which allows us to control the
manufacturing processes from raw materials all
the way to finished products. This even applies to
internal components such as gears and electronics.
We utilize lean manufacturing techniques and the
latest equipment to optimize efficiency, which is
critical to maintain global competitiveness. Our
products are assembled using both state-of-theart robotics and skilled workers, resulting in the
highest, repeatable quality standards, which can
only come from Yamabiko.
3
CONTENTS
Global
Production
Over the years Yamabiko has produced over
55 million engines*. Currently, Yamabiko has
three production facilities in Japan, (Morioka,
Yokosuka and Hiroshima) one in China (Shenzhen)
and one in the United States (Illinois). Production
in all plants is based on the same “quality first”
standards, resulting in consistent, high quality
products. As a result, our worldwide customers
have come to rely on the performance and high
quality of all Yamabiko products.
*As of March 2011
Chain Saws
· Top Handle Saws
· Chain Saw Accessories
6
· Rear Handle Saws
Trimmers / Brushcutters
18
Hedge Trimmers
30
Blowers
36
Other Products
40
· Trimmers and Brushcutters · Clearing Saw
· Backpack Brushcutters
· Cutting Heads & Blades Reference Chart
· Double-sided Hedge Trimmers
· Single-sided Hedge Trimmers
· Shafted Hedge Trimmers
· Handheld Blowers · Backpack Blowers
·
·
·
·
Multi-tool System
Pole Pruner Pole Pruner Attachments
Engine Sprayers · Manual Sprayers
· Spreaders
Engine Cutter
Accessories47
Specifications
48
YAMABIKO Information
54
Special
Interview
Japan Technology
C4 Engine
Analysis
6, 18, 30, 36
14
46
Find these marks for "New" and "Unique" or "Useful" features.
New Model
C4 Technology engine
Heavy duty air filter
Side access
chain tensioner
Non-adjustable
cutter clearance
4
Model certified for CE
Low-Tone model
G-FORCE Engine
Air Pre-Cleaner™
Optional spike
Tip guard
Model certified for CCC
Digital controlled CDI
Soft-start
Model certified for RoHS
Choke with
automatic fast idle
Super Anti-Vibration
system
Rotatable handle
Adjustable
cutter clearance
Ventilated back pad
EZ-Lock system
5
Chain Saws
Takamasa OTSUJI
Talks about 390SX
Engineer
Never compromise on usability
which does not show up on figures
High quality and user-friendly performance
It is engine performance which determines the quality of
chain saws. An engine with high displacement will increase
engine power proportionally, which, on the other hand, will
make it more difficult to confirm to emission regulations.
Therefore, we set a target – “Reduced emission and
increased power.”
While conventional chain saws with equivalent engine
displacement have an output of 63ps per liter, we set a
target of more than 65ps per liter for “390SX”. We are proud
that the “Japan Technology” label represents the highest
level engine development. However, from a fundamental
viewpoint, we realized we must investigate closely each
part for improvement and took various new approaches. As
a result, we reduced harmful substances to one-third and,
moreover, achieved an output of 67-68ps per liter, which is
much higher than our target.
Pursuing not only “power” and “conformity to emission
regulations”, but also usability remain characteristics of our
products. It may be the case that when replacing machines,
usability changes between former models and current
products become a concern. Taking this into consideration,
we worked on maintaining the user friendly features of
conventional models as much as possible. We are sure
that you will like “390SX” which has the same usability, high
power, and speed compared to conventional models.
The choice of Chain Saws in 2013: "390SX"
n Chrome
plated cylinder with Y-port system
(Patent Pending) for extremely better durability,
lower emissions and better fuel economy
n Great power to weight ratio
n Heavy duty 2-piece crank shaft
n Magnesium crank case for light weight and
extended durability
n G Force Engine pre air cleaner system
Great power to weight ratio
Dual post
front guard
Aluminum
front handle
11%UP!
kW/kg
389S
390SX
High Power &
Excellent cutting performance
Power in operation
390SX
kW
389S
rpm
6
Soft-start
7
Rear Handle Saws
Chain Saws
305S
Engine displacement : 35.2cm3
n Output : 1.42kW / 1.93ps n Dry weight*1 : 4.2kg
n Bar Size : 35, 40cm / 14, 16in
n
Trimmers
Brushcutters
n Bar Size : 30, 35cm / 12, 14in
n
352S
Hedge Trimmers
360
Top Handle Saws
Output : 1.40kW / 1.90ps n Dry weight*1 : 4.0kg
n Bar Size : 40cm / 16in
n
n
Blowers
269TCS
photo / 269TS
320TS
269TCS
n Bar Size : 25, 30cm / 10, 12in (269TS)
25cm / 10in (269TCS)
n
8
*1 : Without guide bar and saw chain
377
n Bar Size : 30, 35cm / 12, 14in
n
n
Other Products
269TS
9
n
n
n
Chain Saws
n
High power & excellent cutting
performance
Newly-designed Stage 2 emissioncompliant engine
Great power to weight ratio
G-FORCE air cleaner system &
Large air filter
Rotating chain catcher
n
Soft start
n
Unique chain tensioner
490
390SX
n
n
Engine displacement : 38.4cm3 n Output : 1.90kW / 2.58ps
Dry weight*1 : 4.5kg n Bar Size : 33, 38cm / 13, 15in
Trimmers
Brushcutters
n
n Bar Size : 33, 38, 40, 45, 50cm / 13, 15, 16, 18, 20in
n
Best
Seller
HD air filter
Hedge Trimmers
photo / 452S
389S
452S
577
With heated handle function
452GS
n Output : 2.26kW / 3.07ps
n Dry weight*1 : 4.6kg (452S), 4.8kg (452GS)
n Bar Size : 33, 38, 40, 45cm / 13, 15, 16, 18in
577P
n
n Bar Size : 33, 38, 40cm / 13, 15, 16in
n
n
n Bar Size : 45, 50, 60cm / 18, 20, 24in
n Bar Size : 45, 50, 60cm / 18, 20, 24in
n
n
n
n
Blowers
HD air filter
User Comment
Shindaiwa's gear
is my best partner.
n Bar Size : 33, 38, 40, 45, 50cm / 13, 15, 16, 18, 20in
n
10
488P
n Bar Size : 40, 45, 50cm / 16, 18, 20in
n
598
n
Yves Pouppez
Private owner
Belgium
I have tried many different brands in my life. A few years
ago, I decided to buy only Shindaiwa since I have found
them to be far better than all others. They start when you
need them and require almost no maintenance. Just one
problem: never lend them to your neighbours, or you will
have a lot of difficulties getting them back.
Other Products
488
11
Chain Saw Accessories
n
n
n
Bar Selection
Long stroke engine equivalent to 80
cc class saws-durability and torque
Separately located carburetor
and air cleaner case for vibration
free carburetion and improved
maintenance efficiency
Standard Guide Bars
Pro-Lite Bars
Carving Bars
(Description code FSN and PRO)
(Description code ProLite)
(Description code FSN and PRO)
• For small gas or electric saws.
• For high-speed, light-weigh
pro chain saws.
• For small gas or electric saws.
Good for
light firewood cutting.
Aero dynamic air passage and dust
discharge for cleaner intake air
Good for pruning and
light firewood cutting.
• Good for tree harvesting,
firewood and pulpwood cutting,
and heavy farm use.
600SX
Optional second spike bumper for
additional support for tough cutting
n
Engine displacement : 59.8cm3 n Output : TBD
Dry weight*1 : TBD n Bar Size : 45, 50, 60cm / 18, 20, 24in
Guide Bar & Chain-Chain Saw Models
For original fit-ups and replacement – these bar and chain combinations meet CE compliance for low vibration.
Guide Bar
Model
HD air filter
n Bar Size : 45, 50, 60, 70cm / 18, 20, 24, 28in
757C
n Bar Size : 45, 50, 60, 70cm / 18, 20, 24, 28in
n
Shindaiwa's gear
is my best partner.
Neulebart
Dealer
Belgium
12
0.050
3/8
269TCS
0.050
1/4
320TS
0.050
3/8
305S
0.050
3/8
352S, 360
0.050
3/8
377
0.050
0.325
390SX
0.050
0.325
389S, 452S,
452GS,488,
488P, 490
0.058
0.325
Parts Number
Number of
Drive Links
25
X121-000080
42
30
25
30
35
30
35
35
X122-000171
X101-000090
X122-000171
X123-000271
X122-000171
X123-000271
18132-01424
47
60
47
53
47
53
52
40
X124-000440
57
40
33
38
X124-000450
X122-000320
X123-000520
66
56
64
33
18172-01302
56
38
18172-01504
64
X124-000460
66
21BPX
431717-30231
K2L
21BP
21BPX
73LGX
73LPX
73LPX
73LPX
73DP
73DP
73DP
73DP
X246-000080
X246-000081
431012-30831
TBD
TBD
TBD
X265-000010
431012-32630
431013-31730
X270-000030
A2LM
A2LM-BL
A2LM-BL
A2LM-BL
A2EP-BL
A2EP-BL
A2EP-BL
A2EP-BL
0.325
45
X125-000150
72
488, 488P, 490
0.058
0.325
50
X126-000110
78
598, 600
0.058
3/8
600SX
0.058
3/8
577, 577P, 757,
757C
0.058
3/8
757, 757C
0.058
3/8
50
45
50
60
45
50
60
70
X126-000080
TBD
TBD
TBD
X125-000160
X126-000130
X128-000030
X130-000010
72
64
72
84
68
72
84
89
Optional Spikes
598, 600
757
X221-000020
X221-000110
X222-000140
431610-10030
X222-000140
X223-000130
X222-000140
X223-000080
X223-000070
431011-39530
X224-000080
431711-60031
X242-000000
X243-000000
431713-30230
431713-30231
431721-30230
431721-30231
X244-000041
Carlton Type
40
0.058
577, 577P
Part Number
91VG
91PX
91PX
25AP
91PX
91PX
91VXL
91VXL
91PX
91VG
91PX
95VPX
95VPX
95VPX
21BP
21BPX
21BP
21BPX
21BPX
452S, 488,
488P, 490
Model
Oregon Type
Parts Number
Type
22150-97310
C304-000170
P021-034090
22169-97320
22169-97330
Spike bumper
Long spike
Clutch cover spike
Double spike
Clutch cover spike
N1C-BL
N1C-BL
−
N1C-BL
N1C-BL
N1C-BL
N1C-BL
N1C-BL
N1C-BL
K1NK-BL
K1NK-BL
K2L
K2L
K2L
K2L
Other Products
I began selling Shindaiwa and ECHO machines a few
years ago. In the beginning, I was not really convinced,
having a long experience with another European brand.
I decided to test just one machine, their top handle saw.
The test performed so well that today I sell only these
machines. Indeed, these machines are really selling
more than any others. I am also very happy with the
service. Nice people, really professional and efficient
service but in a friendly way and without unnecessary
pressure. I feel really at home being part of such a team.
Doing business that way is a pleasure.
269TS
Saw Chain
Length(cm)
Blowers
User Comment
Pitch (in)
Hedge Trimmers
757
Gauge(in)
Trimmers
Brushcutters
n
n
Chain Saws
n
13
C4 ENGI NE
Compression - Charged - Clean -
Combustion
Aspire to develop engine technology
which does not exist today.
We will develop the world’s first 4-stroke engine
that uses mixed fuel. This same commitment
motivated us during the 15 years we developed the
C4 engine.
C4 is a hybrid engine that combines the advantages
of both 2-stroke engines and 4-stroke engines.
The features of the C4 engine include cleaner
emissions, better fuel consumption, higher torque
at low speed, and more. Four-stroke engines
require more parts than 2-stroke engines, which
results in the need for lighter weight components.
C4 engines are used in portable machines such
as hedge trimmers and brushcutters. Engines
need to work steadily without a decrease in
performance when used in any condition. Very
few manufacturers can develop these small
engines. Shindaiwa made huge strides to develop
the only engine like it in the world.
The C4 engine has a more complex and longer
path through which fuel flows to the combustion
chamber compared to normal 4-stroke engines.
When fuel does not sufficiently lubricate each
part or the air-fuel mixture does not go through the
route smoothly, the engine does not work properly
or, in the worst case, does not even start. The
key to success is to make prototypes and move
steadily forward even if we sometimes return to
the starting point. The best direction cannot be
found only by computer simulation. Repeated trials
and errors are also essential.
In the future, C4 engine applications, which
originated in Japan, will expand. We are excited
about this prospect.
High power and Lower gas emissions
By combining the high power-to-weight ratio and compactness of a 2-stroke engine with the precise fuel
metering of a 4-stroke, Shindaiwa engineers have successfully developed hybrid engine that delivers
the best of both worlds : the lightweight, high-torque, multi-position characteristics and great
acceleration of the 2-stroke ; and the low noise, increased fuel economy, and dramatically reduced
exhaust gas emissions of 4-stroke.
14
Engineer
Kenji SUZUKI
15
T2510X
C2510
T3410
C3410
Product_P.21 Spec._P.51
C4 ENGINE
Series
DH2510-24 / DH2510T-30
HT2510-30 / HT2510-40
EB2510
AH2510
AHS2510
EB3410
M2510
EB8520RT
Combining the best features of 2 and
Generate wider power band
As characteristic in a 4-stroke engine, C4 technology engines provide a
better power curve for most cutting applications. C4 generates higher
torque and a wider power band. Of course, since the C4 engine runs on
the 4-stroke principle, its exhaust gas emission level is quite low with
better fuel consumption than conventional 2-stroke engines!
16
4-stroke engines!
Run with fuel mix
C4 TechnologyTM Conventional
Engine
2-cycle Engine
Power Curve Comparison
As characteristic in a 2-stroke engine, C4 technology engines are
fueled by conventional 50:1 petrol/oil mixture. It is not necessary to
check the oil level. Thanks to its lubrication system, a C4 technology
engine can be operated in any position, including upside down!
17
Trimmers /
Brushcutters
Engineer
Seiji ISHIHARA
Keep providing machinery for professional users
designed by professionals
Our theme when designing Shindaiwa products is “Machinery
for professional users designed by professionals.” It is
always top of mind that our products support our customers’
jobs and their lives.
There are only a few manufacturers in the world who can
develop both 2-stroke and 4-stroke engines which conform to
emission regulations for products used by professional users.
Designing all parts internally is the biggest advantage of
our company. Our development system allows us to quickly
incorporate customers’ needs, such as light weight and easy
grip handles.
Products for professional users must have strength and
durability. The added challenge is keeping the balance
between power, maneuverability and lightness of weight
while pursuing low vibration and low noise, and we
have been working on further improvements to provide
reliable products which cause less wear on users. Some
products require approximately 4 years from development
to production. Experiences acquired through repeated
tests have provided unique knowledge only our company
possesses. “Japan Technology”, accumulated through years
of experience, is built into each product. Our staff members
in various departments, including engineers, sales reps, and
service reps, all work towards the goal of providing “excellent
products.” Feedback from customers, such as “very good
products”, support our commitment for further advancement.
Unique Features of Shindaiwa Trimmers / Brushcutters
Loop handle
Ergonomic design 8° offset
handle, with enhanced
vibration absorption.
Erg o n o mi c d e si g n e d
handle for easier, more
comfortable operation.
All-in-one control handle features
convenient On/Off switch & throttle
lock-out lever.
4-bolt, closed ported and chromeplated cylinder for durability, lower
emissions, and better fuel economy.
8 mm hollow splined
mainshaft. Reduces
weight.
One-piece electronic
ignition for fast, easy
starts.
Compact
engine design.
Large tank opening
reduces spillage. Easy
to refuel.
18
19
T226S
n Dry weight*1 : 4.8kg (T226S), 4.9kg (C226S)
n
Engine displacement : 21.1cm
3
T230XR
LOOP HANDLE
photo / C230
T242XS
C230
photo / C242S
C242S
n Dry weight*1 : 4.6kg (T230XR), 4.9kg (C230)
n
n
n
Blowers
Trimmers and Brushcutters
LOOP HANDLE
LOOP HANDLE
T260X
F226S
C260
F220
n
n
20
n Dry weight*1 : 5.4kg (T260), 5.5kg (C260)
n
*1 : Without cutting attachment and shield
n
n
photo / C260
3
T2510X
C2510
n Dry weight*1 : 5.2kg (T2510X), 5.3kg (C2510)
n
Other Products
photo / C2510
3
Hedge Trimmers
LOOP HANDLE
Trimmers
Brushcutters
n
photo / C226S
C226S
T220
n
Chain Saws
LOOP HANDLE
21
LOOP HANDLE
Chain Saws
LOOP HANDLE
T270
C270
photo / C270
photo / C310S
T310S
C300
C310S
n Dry weight*1 : 6.1kg (T310S), 6.5kg (C310S)
n
Trimmers
Brushcutters
n Output : 1.10kW / 1.50ps (T270,C270)
1.00kW / 1.36ps (C300)
n Dry weight*1 : 5.6kg (T270), 6.2kg (C270), 6.5kg (C300)
n
LOOP HANDLE
Hedge Trimmers
T350
photo / C350
C35LA
C350
n
n
n
Blowers
LOOP HANDLE
LOOP HANDLE
T410S
B450
C3410
B410S
B450R
22
photo / B410S
T3410
n
Other Products
photo / C3410
n Dry weight*1 : 8.1kg (T410S), 8.7kg (B410S)
n
photo / B450
n Output : 1.60kW / 2.18ps (B450), 1.70kW / 2.31ps (B450R)
n Dry weight*1 : 7.7kg (B450), 8.1kg (B450R)
n
B45LA
n
23
Backpack Brushcutters
Chain Saws
CL520
BP35
n
n
BP40LA
n
Hedge Trimmers
B530
Basic
B530
n Output : 1.90kW / 2.58ps (EU), 2.30kW / 3.13ps (Basic)
n Dry weight*1 : 9.5kg (EU), 9.4kg (Basic)
n
BP520S
n
Trimmers
Brushcutters
n
BP420S
n
Blowers
Clearing Saw
Flash Hook Up
Newly designed
harness and quicker
hook up supports
comfortable operation.
Product_P.47
RCL590
BP530
Touch-less Lever
Anchor-Shape
10+35 Degree
n
24
n
Other Products
CL590
n
25
Cutting Heads & Blades Reference Chart
Item
Number
For Europe
F226S
T226S
−
−
C226S T242XS C242S T2510X C2510
−
l
u
T310S
C310S
T3410
C3410
T350
C350
7 mm LH 7 mm LH 7 mm LH 7 mm LH 8 mm LH 8 mm LH 8 mm LH 8 mm LH 8 mm LH 10 mm LH
T410S
B410S
−
−
l
l
B530 BP420S BP520S
10 mm LH
−
−
BP530
CL520
CL590
8 mm LH
−
−
SBARCL590
TX24-1
−
F220
T220
T230XR
C230
T260X
C260
T270
Asia and others
C270
C350
C300
C35LA
B450
B450R
B45LA
B530
BP35
BP40LA
7 mm LH 8 mm RH 7 mm LH 7 mm LH 7 mm LH 8 mm LH 8 mm LH 8 mm LH 8 mm LH 10 mm LH 10 mm LH 10 mm LH 10 mm LH 10 mm LH 10 mm LH 8 mm LH 8 mm LH
TAP FEED HEAD
G137 100
X047000550
G138 500
X047000560
DS-5 M10L
X047000220
l
Trimmers
Brushcutters
7882015000
l
Z5
X047000740
X047000460
U6
7882014000
UN-34-8L
X047000790
UN-34-7L
6700065010
u
u
u
u
u
u
u
u
u
u
l
Hedge Trimmers
B6
u
u
u
Chain Saws
l : Standard
u: Optional
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
TAP FEED HEAD
7882005000
Blowers
7882004000
u
SPEED-FEED HEAD
l
l
l
l
l
u
(AUS)
u
u
Other Products
X047000632
SPEED-FEED 375
l
X047000622
SPEED-FEED 450
26
X047000581
(AUS,RUS)
l
l
l
l
l
u
u
u
u
u
u
u
27
Cutting Heads & Blades Reference Chart
For Europe
Item
Number
F226S
T226S
C226S T242XS C242S T2510X C2510
−
−
−
u
l
T310S
C310S
T3410
C3410
T350
C350
7 mm LH 7 mm LH 7 mm LH 7 mm LH 8 mm LH 8 mm LH 8 mm LH 8 mm LH 8 mm LH 10 mm LH
T410S
B410S
−
−
B530 BP420S BP520S
10 mm LH
−
−
BP530
CL520
CL590
RCL590
8 mm LH
−
−
−
u
u
SBATX24-1
F220
T220
T230XR
C230
T260X
C260
T270
Asia and others
C270
C350
C300
C35LA
B450
B450R
B45LA
B530
BP35
BP40LA
7 mm LH 8 mm RH 7 mm LH 7 mm LH 7 mm LH 8 mm LH 8 mm LH 8 mm LH 8 mm LH 10 mm LH 10 mm LH 10 mm LH 10 mm LH 10 mm LH 10 mm LH 8 mm LH 8 mm LH
3-CUTTER METAL BLADE
Ø230*t3.0*25.4
X405000320
Ø250*t2.2*25.4
X040000080
Ø255*t3.0*25.4
X405000151
u
u
u
u
u
u
u
u
u
u
For use on grasses
and weeds
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
Chain Saws
l : Standard
u: Optional
Ø255*t2.2*25.4
X405000330
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
Ø255*t2.0*25.4
X405
-000350
Eight-toothed blade
offers cleaner cuts.
Trimmers
Brushcutters
u
For use on grasses
and weeds
CLEARING SAW BLADE
Ø200*t2.0*25.4
69500151530
l
For use on thick
saplings and dense
thicket
• Reload trimmer line in 30 seconds
or less!
• Easy to load, no disassembling of
head required when loading trimmer
line.
Specialty trimmer line
Step 1
Align arrow on knob with eyelet.
• Rugged, reliable semi-automatic
head for medium- to heavy-duty
applications.
Feed approximately 4 meters of
trimmer line through eyelet.
ARMORLINE trimmer line, available in both round or square configurations, is doubleextruded to combine a tough, inner core with a hard outer shell. Result: remarkable
cutting properties.
•T
he tough outer shell is made of a reinforced composite material that resists impact
and abrasion.
knob
eyelet
Speed-Feed 375 Trimmer Head
Speed-Feed 450 Trimmer Head
Speed-feed 375 is smaller in diameter, lighter than
speed-feed 450, and provides better fit up with a 25 cm 3
displacement or smaller engine.
Speed-feed 450 fits all straight shaft Shindaiwa trimmers
and brushcutters. Especially better fit up with a 25 cm 3
displacement or bigger engine.
Brushcutter blades
Medium
Clamshell
Super
Spool
For dense weeds, vines,
and undergrowth.
For undergrowth and
thinning small saplings.
For undergrowth and
thinning medium saplings.
Giant Spool
525002
C2070191 2.5mm x 31m
525001
C2070192 2.5mm x 63m
530001
C2070193 3.0mm x 44m
535001
C2070194 3.5mm x 32m
525003
C2070195 2.5mm x 189m
530003
C2070196 3.0mm x 132m
535003
C2070197 3.5mm x 97m
530005
C2070198 3.0mm x 219m
Round trimmer line
Small
Clamshell
Medium
Clamshell
Large
Clamshell
425015
C2070199 2.5mm x 15m
620015 C2070210 2.0mm x 15m
430002
C2070201 3.0mm x 28m
Small
624015 C2070211 2.4mm x 15m
Clamshell
425001
C2070202 2.5mm x 80m
430001
C2070203 3.0mm x 56m
435001
C2070204 3.5mm x41m
425003
C2070206 2.5mm x 241m
Super
Spool
430003
C2070207 3.0mm x 168m
435003
C2070208 3.5mm x 123m
Giant Spool
430005 C2070209 3.0mm x 279m
626515 C2070212 2.65mm x 15m
Medium
Clamshell
624001 C2070213 2.4mm x 86m
626501 C2070214 2.65mm x 71m
Other Products
Large
Clamshell
Best for grass, light brush, and shrubs.
Reversible for longer life.
• To ensure quality, Silentwist® line is
made with innovative, 100% virgin
polyamide monofilaments.
•U
se Silentwist® line where noise abatement is a requirement.
Square trimmer line
Suitable cutting objects from grass to saplings
Silentwist® trimmer line, reduces wind
resistance and noise. Reduced wind
resistance means trimmers operate more
efficiently for better fuel consumption.
Blowers
•H
ead is pre-wound with 2.4 mm
Silentwist ® trimmer line.
Step 3
Reload by simply turning large
knob on top of trimmer head and
cutting line to equal lengths.
•T
he pliable inner core is made of high-durability, 100% virgin polyamide to permit
the line to flex when necessary.
• Index line by tapping the bottom of
the head on the ground.
•S
mooth bottom enables the head to
glide along the ground.
Step 2
Hedge Trimmers
Speed-Feed Trimmer Head
Warning: A standard trimmer should never be operated with blade-type attachments. A blade-equipped machine must be fitted with barrier bar or a bicycle-type handlebar and a harness or strap.
28
29
Hedge
Trimmers
Engineer
Hisao KODAMA
Generate additional value which
impresses our customers
Hedge trimmers are often used almost all year round
regardless of seasons. Especially for Shindaiwa which are
products for professional users, ensuring durability is the most
important theme. However, simply pursuing durability may
result in bigger and heavier products, which will worsen work
efficiency. For professional users, work efficiency will be vital.
Since our products have been highly rated for durability, we
place much value on the idea that “lightweight is power” and
promote product developments. We have developed some
of the world’s lightest products in the past. In fact, light and
easy-to-use products offered many benefits, such as improved
accuracy of operation and lessened workloads.
We assume that it is common for all industries that the best
part of manufacturing is to create values which do not exist in
the market. As for hedge trimmers, we can find many tasks to
solve, such as reduced vibration and improved environmental
performance. With this in mind, creating additional values
which will amaze and impress users is our mission and also
plays a critical role in Japanese manufacturing. Seeing that
we have developed the world-first 4-stroke engine compliant
with emission regulations, this culture is built into Shindaiwa.
We are determined to keep on producing products which
will bring a paradigm shift to our industry, and exceed our
customers’ expectations.
Unique Features of Shindaiwa Hedge Trimmers
Easy-to-Pull recoil system.
Light weight but durable engine.
Rotatable rear handle :3 positions.
Blade sharpened on three edges
DH2510
HT2510
Heavy-duty gear case
4-stroke engine compliant to emission
regulations (DH2510&HT2510).
30
31
Double-sided Hedge Trimmers
Single-sided Hedge Trimmers
DH220
22DH
HT230
PRC
HT230
Basic
HT230-30
Basic
HT230-40
n Output : 0.75kW / 1.02 ps (HT230)
0.80kW / 1.09ps (HT230-30,HT230-40)
n Dry weight : 5.6kg (HT230), 5.5kg (HT230-30), 6.0kg (HT230-40)
n Effective cutting length : 693mm (HT230,HT230-30)
1008mm (HT230-40)
n
HT2510- 30
HT2510- 40
Output : 0.76kW / 1.03ps
n Dry weight : 5.79kg (HT2510-30), 6.14kg (HT2510-40)
n Effective cutting length : 693mm (HT2510-30), 1008mm (HT2510-40)
n
n
Hedge Trimmers
DH2200ST
photo / HT2510-30
Trimmers
Brushcutters
n Output : 0.60kW / 0.82ps (DH220)
0.68kW / 0.92ps (22DH)
n Dry weight : 4.7kg (DH220), 4.5kg (22DH)
n Effective cutting length : 428mm (DH220), 521mm (22DH)
n
photo / HT230-30
Chain Saws
photo / 22DH
n Dry weight : 4.6kg
n Effective cutting length : 484mm
n
Blowers
photo / DH230
DH230
PRC
DH230
Basic
DH230 -30
n Output : 0.75kW / 1.02 ps (DH230)
0.80kW / 1.09ps (DH230-24,DH230-30)
n Dry weight : 5.7kg (DH230), 5.5kg (DH230-24), 5.8kg (DH230-30)
n Effective cutting length : 519mm (DH230,DH230-24)
659mm (DH230-30)
n
32
photo / DH2510T-24
DH2510T - 24
DH2510T - 30
n Dry weight : 6.29kg (DH2510T-24), 6.44kg (DH2510T-30)
n Effective cutting length : 519mm (DH2510T-24), 658mm (DH2510T-30)
n
Other Products
DH230 -24
Basic
33
Shafted Hedge Trimmers
Chain Saws
Short Reach
Trimmers
Brushcutters
AHS2510
AHS242S
Output : 0.80kW / 1.09ps n Dry weight : 6.2kg
n Overall length : 1660mm
n
n
n
~90°
Angle
adjustment
system works
per 15°
Hedge Trimmers
n
Long Reach
Blowers
AH230S
n
34
3
n Dry weight : 6.2kg n Overall length : 2365mm
n
n
3
~45°
n Dry weight : 6.3kg n Overall length : 2365mm
n
n
3
Foldable
arms
(Long Reach only)
180°
Other Products
n
AH2510
AH242S
35
Blowers
Masayuki TAKANO
Talks about EB220S
Engineer
Realizing considerable weight savings
by reviewing the engine itself
“EB220S” is the product which has reached a higher level
for our manufacturing and put much value on “usability for
customers”. The greatest characteristic is considerable
weight savings. While conventional models of the same
class weigh approximately 4.5kg, the “EB220S”, with “Japan
Technology” incorporated, has the weight of approximately
3kg. For not only professional users, but also women and
elderly people, it is the product which lessens workloads.
The biggest challenge in developing the model was how to
maintain power while reducing weight considerably. Then
we started to “downsize the engine.” We reviewed the
engines installed on the conventional blowers from scratch
and developed a new model.
We reviewed the “EB220S” design itself by once again
investigating closely each part. Introducing a newly
designed handle is one example. Adding a second handle
at the lower part of the machine allows users to grip firmly
with both hands, which improves stability and lessens
workloads for users.
We know that many users are dissatisfied with compact,
but powerless electric blowers. It is the usability and
powerful performance of the“EB220S” which satisfies
users’ expectations.
The choice of Blowers in 2013: "EB220S"
ULTRA
Light
Heavy duty 2-stage air cleaner
Unique engine layout
provides balance and
also prevents clothes
from being sucked in.
36
Convenient second handle
for operator comfort.
Cruise control throttle
system for c onst ant
engine speed during
operation.
37
Handheld Blowers
n
n
n
n
Adjustable “cruise control throttle” for
reduced fatigue
Cruise control throttle Heavy duty 2-stage air
system for constant
cleaner
engine speed during
operation.
Comfortable rubber handle grip
Unique engine layout
is for best balance and
also prevents clothes
from being sucked in.
Once you press the switch, the engine
stops! Not necessary to keep pressing the
switch
Flat-nozzle and round-nozzle are available
with or without joint pipe to customize work
Right side air intake location prevents
clothes being sucked in
EB220S
Engine displacement : 21.1cm3 n Output : TBD
n Dry weight*1 : TBD n Max air volume*2 : TBD n Max air speed : TBD
n
n Max air volume*2 : 522m3 / h n Max air speed : 74.2m / sec
EB2510
Hedge Trimmers
EB240S
n
Covenient sub-grip for
operator comfort.
Trimmers
Brushcutters
n
Ultra lignt handheld blower
Chain Saws
n
Backpack Blowers
n Max air volume*2 : 426m3 / h n Max air speed : 79m / sec
n
Blowers
photo / EB803RT
EB803
EB803RT
EB3410
Engine displacement : 79.7cm3 n Output : 3.33kW / 4.53ps
n Dry weight*1 : 12.5kg ( Ø 74pipe), 12.6kg ( Ø 65pipe)
n Max air volume*2 : 1260m3 / h ( Ø 74pipe), 1140m3 / h ( Ø 65pipe)
n Max air speed : 85m / sec ( Ø 74pipe), 95m / sec ( Ø 65pipe)
n
n Max air volume*2 : 474m3 / h (Round pipe), 486m3 / h (Flat pipe)
n Max air speed : 87m / sec (Round pipe), 86m / sec (Flat pipe)
n
38
Engine displacement : 79.2 cm3 n Output : 3.14kW / 4.27ps
n Dry weight*1 : 11.4kg
n Max air volume*2 : 1181m3 / h ( Ø 74pipe)
n Max air speed : 82m / sec ( Ø 74pipe)
n
*1 : Unit with blower pipe
*2 : At actual usage point
Other Products
EB8520RT
39
Chain Saws
ULTRA
Light
SBA-PS24
Trimmers
Brushcutters
SBA-LE24
Blade not included
Blade Part No. 69601552632
SBA-P24
Bar/Chain not included
M230
SBA-AHS2422
Positive Coupler
SBA-AH2422
The Multi -tool's easyto-use coupler provides
a positive connection
between the power
head and attachments.
n Dry weight*1 : 3.9kg n Length*1 : 1020mm
n
3
n
Hedge Trimmers
Multi-tool System
Blowers
photo / M230
SBA-TX24-1
M242S
Cutting head not included
n
photo / M242S
Configuration
M2510
Length (mm)
Drive shaft
Diameter (mm)
Main Pipe
Diameter (mm)
Gear reduction ratio
Effective cutting length / Pitch (mm)
n
Guide Bar
Length (inch)
Saw chain
Pitch (inch)
Cutting Blade
Length (mm)
Max. sweeping width (mm)
photo / M2510
Applicable Power Head
40
#65001
SBA-AH2422
#65003
SBA-AHS2422
#78703
ATT-AH230/CE
SBA-P24
#65002
ATT-P230/CE
SBA-LE24
#65010
EU
Basic
EU
Basic
EU
Basic
−
EU
Basic
−
EU
Basic
EU
0.8
0.8
(w / o Cutting
attachment and
Shield)
(w / o Cutting
attachment and
Shield)
2.2
2.2
2.1
2.1
1.8
1.8
1.8
0.9
(w / o Bar and
Chain)
(w/o Bar and
Chain)
2.2
5.2
(w / o Bar and
Chain)
2.2
(w / o Blade)
(w / o Blade)
(w / Drum
assemblies)
820
820
1460
1460
840
840
−
1870
1870
−
795
795
480
6
24.0
1.29
6
24.0
1.29
6
24.0
6.14
6
24.0
6.14
6
24.0
6.14
6
24.0
6.14
−
−
6.14
6
24.0
1.06
6
24.0
1.06
−
−
1.06
6
24.0
1.36
6
24.0
1.36
6
24.0
40.0
−
−
−
−
−
−
520 / 31
−
−
520 / 31
−
−
520 / 31
−
−
520 / 31
−
−
520 / 31
−
−
−
8, 10, 12
3/8
−
8, 10, 12
3/8
−
8, 10, 12
3/8
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
197
−
197
−
−
575
M242S
M2510
M230
M242S
M2510
M230
M242S
M2510
M230
−
M242S
M2510
M230
−
M242S
M230
M230
M242S
M2510
(Without
outer tube)
Lawn Edger Attachment
Power
Broom
Attachment
SBA-TX24-1
(Without
outer tube)
Pole Pruner Attachment
Pole Pruner
Attachment
Hedge Trimmer Attachment
SBA-PS24
*1: Unit without attachment
Other Products
Dry weight (kg)
Hedge
Trimmer
Attachment
Trimmer Attachment
41
Pole Pruner
ULTRA
Light
Engine Sprayer
Powered by Shindaiwa's legendary
22.5cc durable engine
E x tra large chemic al
tank holds up to 26
liters of liquid for longer
operation time.
Narrow kerf bar and 3/8 inch pitch
low profile chain are standard.
Choose 20, 25 or 30 cm bar.
Chain Saws
easy to carry
Bar/Chain not included
P230S
Trimmers
Brushcutters
Easy-to-use coupler
provides a positive
connection between
the power head and
attachments.
n Over length Lenght with 10"bar assembly : 2805mm
n
Guide bar & chain-pole pruner & multi-tool models
These bar and chain combinations are intended for Pole Pruners.
Guide Bar
Model
Pitch (in)
Length (cm)
Parts Number
Number of Drive
Links
20
X120-000030
0.043
3/8
25
30
X121-000090
X122-000300
Oregon Type
Part Number
33
90SG
X260-000000
39
44
90SG
90SG
X221-000040
X222-000050
High pressure piston pump
sprays mist farther and wider
ES726
*1: Without cutter attachment
n Chemical tank capacity : 26L
n
Blowers
Sprayers
Manual Sprayers
SP20HPS
SP30BPE
Dry weight*1 : 2.1kg
n Chemical tank capacity : 7.6L
n Maximum Pressure : 3.2kgf / cm2
n
n
42
n
Other Products
SP40BPS
Hedge Trimmers
P230S
SBA-P24
# 65002
ATT-P230
Saw Chain
Gauge (in)
SP45BPES
n
*1: Unit without spraying hose and nozzle
43
Full 6-point anti-vibration system
for reduced operator fatigue
Spreaders
Transmission is
enclosed and sealed
Chain Saws
photo / EC7600W
Cutting blade is not included
One-step choke and fast-idle
mechanism for easy hot and
cold restarts
Heavy-duty, multi-ribbed V-belt for
constant grip and reduced slippage
RS60
RS41
Dry weight : 10.2kg
n Hopper capacity : 36.8L
n
RS76
RS76S
n
n
Dry weight : 6.2kg
Hopper capacity : 21.1L
Trimmers
Brushcutters
EC7500W
Output : 3.40kW / 4.62ps n Dryweight*1 : 10.2kg
n Applicable blade diameter : 12inch / 305inch
n
n
EC7600W
Output : 3.40kW / 4.62ps n Dryweight*1 : 10.6kg
n Applicable blade diameter : 14 inch/ 355inch
n
n
Water Kit included
n
n
Dry weight : 12.1kg
Hopper capacity : 36.8L
Hedge Trimmers
Replacement rope guide
Dry weight : 12.1kg
n Hopper capacity : 36.8L
n
Sealed recoil starter
for long service life
Blowers
Engine Cutters
Engine Cutter Abrasive Wheels
Model
EC350
EC7500W
EC7600W
Cutting wheel
diameter
Part Number
M618-000040
9 in (230 mm)
M618-000050
12 in (305 mm) M618-000010
14 in (355 mm) M618-000000
Complete kit includes two water-feed nozzles, shut-off
valve, quick-disconnect fitting, and all mounting hardware.
EC350
2 types of cutting blades are included
n Dryweight*1 : 7.5kg
n Applicable blade diameter : 9inch / 230inch
n
44
*1: Unit without specified cutting blade
M061-000010
12.7mm (1/2 in.) and 16mm (5/8 in.) hoses
“Wheel” Kit
for Metal
for Concrete
for Concrete
for Concrete
Other Products
Water Kit
Description
Easy-to-install kit supports the weight of EC7500W
and EC7600W cut-off saws, making the saw easier to
handle during flush-cutting.
CST-EC7500 includes mounting hardware.
45
Evolution of Yamabiko which
”ANALYSIS” supports
Gathering feedback delivers
Yamabiko quality and
trust from users
YAMABIKO
Accessories
Oil And Lubricants
Shindaiwa One
This oil is specially formulated to meet
ISO-L-EGD and JASO FC standards for use
in all 2-cycle and C4 engines.
Delivers low smoke, temperature protection,
and fuel stabilization.
Shindaiwa highly recommends oil that meets
ISO-L-EGD and JASO FC
standards for use in all
2-cycle and C4 engines.
Quality
ANALYSIS
Gathering analytical data delivers
Yamabiko quality and trust from users
Phase 1
Phase 2
Phase 3
Before designing
During development
After sales
Gearcase Lubricant
Gearcase LubrIcant
Handy pump fits five-gallon and
20-liter pails to provide measured
quantities of mixing oil with each
pump stroke. Delivers 3.38 oz.
(100 ml) per stroke.
The best solution for easy
gearcase maintenance on all
straight-shaft trimmers and
brushcutters. Great for flexible lubrication. Complete
with easy-to-understand instructions.
99909-0010
13-57 0.8 oz. tube.
13-58 10 oz. tube.
Trust from
USERS
Analysis improves the
quality of Yamabiko products
and produces user trust.
We utilize computer simulations including strength
analysis, which determines material strength.
Vibration analysis and thermo-fluid analysis
analyze flow of combustion in engines and
blowing performance of blowers. We quantify
performance and quality of all Yamabiko products
using computers, analyzing and verifying them from
various angles. We analyze not only products on the
market, but also new models under development.
Take the case of hooks breaking under certain
conditions. What kind of new part shape can
prevent the problem? If we change shapes or
materials, what effects will those changes have on
other portions of the product? In these cases, our
analysis techniques are useful. When we develop a
new model, we study the basis of the current model.
What kind of improvements should be made to
evolve the model into a lighter, stronger, and easier
to use product? Analysis plays a role in deciding
the direction of a product.
46
In some cases, we are required to interpret invisible
phenomena. For example, we cannot visually
confirm efficiency of combustion, conduction of
heat, and subtle distortion. A little change of a
condition can totally change what the user feels.
We provide feedback data to designers and utilize
users’ opinions from the field for further analysis to
maintain quality and improve reliability of products
originated in Japan.
We will increase areas where analysis can
be applied in new product development. The
establishment of this system will lead to reduced
development timelines and costs, which will
translate into product benefits for customers. We
are committed to enhancing our skills so we can
continue making new and innovative improvements.
Protective equipment & Apparel
Safety Helmet Set
Face Protector
82002 Designed and manufactured
specifically for the commercial
end-user.
82003 Designed and manufactured specifically for the commercial end-user.
Durable nylon six-point fabric head
harness helmet, wire mesh face
protector, and ear muffs.
Durable nylon visor, wire mesh
face protector, and ear muffs.
Ergonomic Harness
Safety Glasses
These stylish safety glasses feature tough
impact- and abrasion-resistant lenses.
Fully adjustable temples and arms.
Thanks to single-piece lenses, these glasses
are light weight.
80767 Clear lens.
80766 Blue mirror lens.
80765 Grey lens.
FLASH
HOOK UP
80765
80766
80767
Part No.
C062-000560
The new Flash Hook Up system
can greatly save your time. It
takes less than one second!
Engineer
Daiki
SHIBASAKI
47
Specifications
Chain Saws
Configuration
Engine displacement (cm3)
Output (kW / ps)
Dry weight*1 (kg)
Fuel tank capacity (L)
Fuel consumption at maximum engine power (kg / h)
Chain oil tank capacity (L)
Top Handle Saws
269TS
269TCS
EU
26.9
0.86 / 1.17
2.9
0.24
0.55
0.16
EU
26.9
0.86 / 1.17
2.9
0.24
0.55
0.16
Priming pump
¡
¡
Ignition system
CDI
Soft start
Inertia
CDI
Soft start
Inertia
Start assist system
Chain brake
Choke w / automatic fast idle release
Chain Tensioner
Saw chain pitch (inch)
Guide bar gauge (inch)
Applicable bar length (cm / inch)
Rear Handle Saws
305S
320TS
EU
32.3
1.36 / 1.85
3.5
0.37
0.76
0.23
−
CDI
Soft start
Inertia
EU
30.5
1.10 / 1.50
4.0
0.25
0.59
0.26
AUS
30.5
1.10 / 1.50
4.0
0.25
0.56
0.26
¡
¡
¡
CDI
Soft start
Inertia
CDI
Soft start
Inertia
CDI
Soft start
Inertia
¡
¡
¡
¡
¡
¡
Side
3/8
0.050
25, 30
/ 10, 12
Side
1/4
0.050
Side
3/8
0.050
30, 35
/ 12, 14
Side
3/8
0.050
30, 35
/ 12, 14
25 / 10
RUS
30.5
1.10 / 1.50
4.0
0.25
0.75
0.26
Side
Side
3/8
3/8
0.050 (0.043) 0.050 (0.043)
30, 35
30, 35
/ 12, 14
/ 12, 14
352S
352S
360
377
390SX
389S
EU
35.2
1.42 / 1.93
4.2
0.40
0.94
0.25
−
CDI
Soft start
Inertia
AUS, RUS
35.2
1.40 / 1.90
4.2
0.40
0.94
0.25
−
CDI
Soft start
Inertia
Basic
35.2
1.40 / 1.90
4.0
0.40
−
0.25
−
TCI
−
Manual
−
Front
3/8
0.050
RUS, Korea
37.7
1.65 / 2.24
4.3
0.40
−
0.25
−
TCI
−
Manual
−
Front
3/8
0.050
EU
38.4
1.90 / 2.58
4.5
0.42
TBD
0.215
CDI
Soft start
Inertia
EU, AUS
38.9
1.70 / 2.31
4.5
0.46
1.06
0.25
−
CDI
Soft start
Inertia
40 / 16
40 / 16
¡
¡
Front
3/8
0.050
35, 40
/ 14, 16
Front
3/8
0.050
35, 40
/ 14, 16
452S
EU, TUR
45.1
2.26 / 3.07
4.6
0.54
1.09
0.27
−
CDI
Soft start
Inertia
452GS
RUS
45.1
2.26 / 3.07
4.6
0.54
1.09
0.27
−
CDI
Soft start
Inertia
PRC, Basic
45.1
2.26 / 3.07
4.6
0.54
1.09
0.27
−
CDI
Soft start
Inertia
¡
¡
¡
¡
¡
Front
0.325
0.050
33, 38
/ 13, 15
Front
0.325
0.058
33, 38, 40
/ 13, 15, 16
Front
0.325
0.058
33, 38, 40, 45
/ 13, 15, 16, 18
Front
0.325
0.058
Front
0.325
0.058
40, 45
/ 16, 18
38 / 15
488
EU
45.1
2.26 / 3.07
4.8
0.54
1.09
0.27
−
CDI
Soft start
Inertia
EU, TUR
47.9
2.26 / 3.07
4.9
0.60
1.05
0.30
−
CDI
−
Inertia
¡
−
Front
Front
0.325
0.325
0.058
0.058
33, 38, 40, 45 33, 38, 40, 45, 50
/ 13, 15, 16, 18 / 13, 15, 16, 18, 20
RUS
47.9
2.20 / 2.99
4.9
0.60
1.05
0.30
−
CDI
−
Inertia
−
Front
0.325
0.058
38, 45
/ 16, 18
Chain Saws
Configuration
Output (kW / ps)
Dry weight*1 (kg)
Fuel consumption at maximum engine power (kg / h)
Chain oil tank capacity (L)
Priming pump
Ignition system
Start assist system
Chain brake
Choke w / automatic fast idle release
Chain Tensioner
Applicable bar length (cm / inch)
Rear Handle Saws
488
PRC
47.9
2.20 / 2.99
4.9
0.60
1.05
0.30
−
CDI
−
Inertia
−
Front
0.325
0.058
45, 50
/ 18, 20
488P
Basic
47.9
2.20 / 2.99
4.9
0.60
1.05
0.30
−
CDI
−
Inertia
−
Front
0.325
0.058
40, 45, 50
/ 16, 18, 20
Basic
47.9
2.20 / 2.99
5.2
0.60
−
0.30
−
CDI
−
Inertia
−
Front
0.325
0.058
40, 45, 50
/ 16, 18, 20
490
EU
47.9
2.28 / 3.10
4.8
0.60
1.07
0.30
−
CDI
−
Inertia
AUS
47.9
2.28 / 3.10
4.8
0.60
1.07
0.30
−
CDI
−
Inertia
577
577P
598
600SX
Basic
57.3
2.60 / 3.54
6.1
0.77
−
0.32
−
CDI
−
Manual
−
Front
3/8
0.058
45, 50, 60
/ 18, 20, 24
RUS
59.8
3.00 / 4.08
6.1
0.64
1.47
0.30
−
CDI
Decomp
Inertia
EU
59.8
TBD
TBD
0.64
TBD
0.30
−
CDI
Decomp
Inertia
T242XS
T260
T270
EU
L
23.9
0.80 / 1.09
5.1
0.62
0.58
Diaphragm
Soft Start
Solid
6
24.0
1.36
SPEED-FEED
375
(X047-000632)
AUS
L
24.1
0.90 / 1.22
5.4
0.6
−
Diaphragm
−
Solid
7
24.0
1.36
AUS
L
27.2
1.10 / 1.50
5.6
0.67
0.87
Diaphragm
−
Solid
7
26.0
1.36
−
−
−
−
−
¡
¡
Side
0.325
0.058
33, 38, 40, 45, 50
/ 13, 15, 16, 18, 20
Side
0.325
0.058
40, 45, 50
/ 16, 18, 20
Basic
57.3
2.60 / 3.54
5.8
0.77
−
0.32
−
CDI
−
Manual
−
Front
3/8
0.058
45, 50, 60
/ 18, 20, 24
T226S
T230XR
¡
¡
Side
3/8
0.058
Side
3/8
0.058
45,50,60
/18,20,24
40 / 16
757
RUS
73.5
4.06 / 5.52
6.8
0.77
−
0.36
−
CDI
−
Manual
−
Front
3/8
0.058
50 / 20
757C
AUS, Basic
Basic
73.5
73.5
4.06 / 5.52
4.06 / 5.52
6.8
6.6
0.77
0.77
−
−
0.36
0.36
−
−
CDI
CDI
−
−
Manual
Manual
−
−
Front
Front
3/8
3/8
0.058
0.058
45, 50, 60, 70 45, 50, 60, 70
/ 18,20, 24, 28 / 18, 20, 24, 28
Trimmers /
Brushcutters
Configuration
Handle type*1
Output (kW / ps)
Dry weight*2 (kg)
Fuel consumption at maximum engine power (L / h)
Carburetor
Type
Start assist system
Drive shaft
Main Pipe
Type
Diameter (mm)
Diameter (mm)
Standardized
Cutting Device
Type
(Item Number)
Type
(Item Number)
*1 : Handle type L : loop handle
48
U : U shaped handle
Curved Shaft Trimmers
F220
F226S
Trimmers
T220
AUS
RUS
EU
AUS
EU
AUS
L
L
L
L
L
L
21.1
21.1
21.2
21.1
21.2
22.5
0.69 / 0.94
0.69 / 0.94
0.70 / 0.95
0.69 / 0.94
0.70 / 0.95
0.74 / 1.01
4.2
4.3
4.2
4.1
4.8
4.6
0.53
0.53
0.4
0.53
0.4
0.54
0.66
0.66
0.46
−
0.46
0.73
Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm
−
−
Soft Start
−
Soft Start
−
Flexible
Flexible
Flexible
Solid
Flexible
Solid
6
6
6
6
6
6
22.2
22.2
25.0
24.0
25.0
24.0
−
−
1.0
1.29
1.36
1.29
SPEED-FEED SPEED-FEED G137 100 SPEED-FEED G138 500
−
375
375
375
(X047-000622) (X047-000622) (X047-000550) (X047-000632) (X047-000560)
−
−
−
−
−
−
T310S
T350
T410S
Brushcutters
C226S
C230
C242S
EU
EU, AUS
EU
EU
AUS
RUS
EU
L
L
L
U
U
U
U
28.9
33.6
41.5
21.2
22.5
22.5
23.9
1.00 / 1.36
1.30 / 1.77
1.60 / 2.18
0.70 / 0.95
0.74 / 1.01
0.74 / 1.01
0.80 / 1.09
6.1
7.0
8.1
4.9
4.9
4.9
5.1
0.75
0.9
0.7
0.4
0.54
0.54
0.62
0.71
1.08
TBD
0.46
0.73
0.73
0.58
Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm
Soft Start
−
Soft Start
Soft Start
−
−
Soft Start
Solid
Solid
Solid
Flexible
Solid
Solid
Solid
8
8
8
6.15
6
6
6
26.0
26.0
28.0
25.0
24.0
24.0
24.0
1.4
1.24
1.33
1.36
1.29
1.29
1.36
SPEED-FEED
3-cutter
metal
SPEED-FEED
SPEED-FEED
Z5
DS-5 M10L
−
450
blade
375
375
(X047-000581) (78820-15000) (X047-000220) (X405-000320)
(X047-000632) (X047-000632)
4-cutter metal
−
−
−
−
−
−
blade
(X405-000330)
C260
C270
AUS
U
24.1
0.90 / 1.22
5.5
0.6
−
Diaphragm
−
Solid
7
24.0
1.36
AUS
U
27.2
1.10 / 1.50
6.2
0.67
0.87
Diaphragm
−
Solid
7
26.0
1.36
−
−
−
−
Not all models are available in all markets throughout the world. Also, specifications may change without notice.
49
Specifications
Trimmers /
Brushcutters
Configuration
Handle type*1
Output (kW / ps)
Dry weight*2 (kg)
Carburetor
Type
Start assist system
Type
Drive shaft
Diameter (mm)
Main Pipe
Diameter (mm)
Standardized
Cutting Device
Type
(Item Number)
Type
(Item Number)
U : U shaped handle
Trimmers /
Brushcutters
Configuration
Handle type*1
Output (kW / ps)
Dry weight*2 (kg)
Carburetor
Type
Start assist system
Type
Drive shaft
Diameter (mm)
Main Pipe
Diameter (mm)
Type
Standardized
Cutting Device
(Item Number)
Type
(Item Number)
U : U shaped handle
Hedge Trimmers
RUS
EU
Backpack brushcutters
BP35
BP40LA
Basic
L
33.6
1.24 / 1.69
9.7
1.2
1.14
Float
−
Flexible
8
26.0
1.24
Basic
L
33.6
1.50 / 2.04
8.9
1.2
0.95
Float
−
Flexible
8
26.0
1.24
−
−
−
−
Adjustable
Start assist system
Rotatable handle
Anti-vibration system
Cutter Type
Effective cutting length (mm)
BP420S
RUS
Basic
EU
U
33.6
1.34 / 1.82
8.0
0.76
1.14
Diaphragm
−
Solid
8
28.0
1.36
U
41.5
1.60 / 2.18
7.7
0.9
1.39
Diaphragm
−
Solid
10
28.0
1.36
AUS
BP520S
−
−
BP530
EU
EU
L
L
42.7
51.7
1.70 / 2.31
1.90 / 2.58
11.5
11.6
1.2
1.2
1.20
1.15
Diaphragm Diaphragm
Soft Start
Soft Start
Solid
Solid
8
8
28.0
28.0
1.33
1.33
3-cutter metal 3-cutter metal
blade
blade
(X405-000151) (X405-000151)
−
Double-sided Hedge Trimmers
DH220
22DH
DH2200ST
Adjustable
Overall length (mm)
EU
B450
AUS, Basic
RUS
w/o swivel
hanger
U
U
41.5
41.5
1.70 / 2.31
1.70 / 2.31
7.6
7.8
0.76
0.76
1.26
1.36
Diaphragm Diaphragm
−
−
Solid
Solid
10
10
28.0
28.0
1.36
1.36
SPEED-FEED
−
450
(X047-000581)
8-cutter metal
−
blade
(X405-000350)
B450R
AUS, Basic
w/ swivel
hanger
U
41.5
1.70 / 2.31
8.1
0.76
1.26
Diaphragm
−
Solid
10
28.0
1.36
B45LA
B410S
CL520
−
−
−
−
Basic
EU
EU
EU
Basic
TUR
EU
U
41.5
1.69 / 2.30
8.1
0.76
1.26
Diaphragm
−
Solid
10
28.0
1.36
U
41.5
1.60 / 2.18
8.7
0.7
TBD
Diaphragm
Soft Start
Solid
8
28.0
1.33
3-cutter metal
blade
(X405-000151)
51.7
1.80 / 2.45
10.5
1.0
1.15
Diaphragm
−
Solid
10
35.0
1.4
U
53.2
1.90 / 2.58
9.5
1.2
?
Diaphragm
−
Solid
10
28.0
1.36
U
53.2
2.30 / 3.13
9.4
1.2
?
Diaphragm
−
Solid
10
28.0
1.36
U
53.2
1.90 / 2.58
9.5
1.2
?
Diaphragm
−
Solid
10
28.0
1.36
U
58.2
2.40 / 3.26
10.4
0.75
1.77
Diaphragm
−
Solid
10
35.0
1.4
−
U6
(78820-14000)
−
−
−
−
−
−
−
−
−
B530
CL590
Clearing saw
RCL590
Trimmers (C4 Engine)
T2510X
EU
U
58.2
2.40 / 3.26
10.2
0.75
1.77
Diaphragm
−
Solid
10
35.0
1.4
Clearing saw
blade
(695001-51530)
EU
L
24.5
0.80 / 1.09
5.2
0.59
0.54
Diaphragm
Decomp
Solid
6
24.0
1.29
SPEED-FEED
375
(X047-000632)
AUS
L
24.5
0.80 / 1.09
5.2
0.59
0.54
Diaphragm
Decomp
Solid
6
24.0
1.29
−
−
EU
L
53.2
1.60 / 2.18
11.8
1.2
1.31
Diaphragm
−
Flexible
8.2
26.0
1.24
TUR
L
53.2
1.90 / 2.58
12.8
1.2
−
Diaphragm
−
Flexible
8
26.0
1.24
−
−
−
−
−
DH230-24
DH230-30
−
−
T3410
Brushcutters (C4 Engine)
C2510
C3410
EU
EU
EU
L
U
U
34.0
24.5
34.0
1.10 / 1.50
0.80 / 1.09
1.10 / 1.50
6.0
5.3
6.4
0.75
0.59
0.75
0.65
0.54
0.65
Diaphragm Diaphragm Diaphragm
Decomp
Decomp
Decomp
Solid
Solid
Solid
7
6
7
26.0
24.0
26.0
1.36
1.29
1.36
SPEED-FEED SPEED-FEED SPEED-FEED
450
375
450
(X047-000581) (X047-000632) (X047-000581)
−
−
−
Cutter Clearance
Dry weight (kg)
B450
Pitch (mm)
Output (kW / ps)
C35LA
C350
U
U
U
U
U
27.2
28.9
33.6
33.6
33.6
1.00 / 1.36
1.00 / 1.36
1.30 / 1.77
1.37 / 1.86
1.37 / 1.86
6.5
6.5
7.7
7.6
7.6
0.69
0.75
0.90
0.76
0.76
0.87
0.71
1.08
1.14
1.14
Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm
−
Soft Start
−
−
−
Solid
Solid
Solid
Solid
Solid
7
8
8
8
8
26.0
26.0
28.0
28.0
28.0
1.36
1.4
1.36
1.36
1.36
SPEED-FEED SPEED-FEED SPEED-FEED SPEED-FEED
−
450
450
450
450
(X047-000581) (X047-000581) (X047-000581) (X047-000581)
8-cutter metal
8-cutter metal
−
−
−
blade
blade
(X405-000350)
(X405-000350)
Basic
21.1
0.68 / 0.92
4.5
−
0.4
0.53
−
−
−
6.14
Double
521
31
50
C310S
EU
21.1
0.60 / 0.82
4.7
−
0.4
0.62
−
−
−
6.14
Double
428
31
Configuration
Blade
Brushcutters
C300
EU, AUS
21.1
0.59 / 0.80
4.6
−
0.4
0.55
Soft start
¡
¡
4.60
Double
484
35
NonAdjustable
DH230
EU
22.5
0.75 / 1.02
5.7
−
0.6
0.64
−
−
−
4.89
Double
519
35
PRC
22.5
0.75 / 1.02
5.7
−
0.6
0.64
−
−
−
4.89
Double
519
35
Adjustable
Adjustable
Basic
22.5
0.80 / 1.09
5.5
5.8
−
0.6
0.67
−
−
−
4.89
DH2510T-24 DH2510T-30
EU, AUS
24.5
0.76 / 1.03
6.29
6.44
−
0.55
0.53
Decomp
¡
¡
4.89
3.73
Double
Double
519
35
659
35
Adjustable
Adjustable
519
658
35
Non-Adjustable
Single-sided Hedge Trimmers
HT230
HT230-30
EU
22.5
0.75 / 1.02
5.6
−
0.6
0.64
−
−
−
4.89
Single
693
35
PRC
22.5
0.75 / 1.02
5.6
−
0.6
0.64
−
−
−
4.89
Single
693
35
HT230-40 HT2510-30 HT2510-40
Basic
22.5
0.80 / 1.09
5.5
6.0
−
0.7
0.67
0.67
−
−
−
4.89
4.89
Single
693
1008
35
35
Adjustable Adjustable Adjustable Adjustable
Shafted Hedge Trimmers
AH230S
AH242S AHS242S
AH2510
AHS2510
EU
24.5
0.76 / 1.03
5.79
6.14
−
0.55
0.53
Decomp
−
−
3.73
Single
693
1008
35
Basic
EU
EU
EU
EU
22.5
23.9
23.9
24.5
24.5
0.80 / 1.09 0.80 / 1.09 0.80 / 1.09 0.80 / 1.09 0.80 / 1.09
5.9
6.2
6.1
6.3
6.2
2355
2365
1660
2365
1660
0.55
0.62
0.62
0.6
0.59
0.69
0.54
0.54
0.56
0.56
Soft Start Soft Start Soft Start Decomp
Decomp
−
−
−
−
−
Non-Adjustable　Adjustable Adjustable Adjustable Adjustable Adjustable
¡
¡
¡
¡
¡
6.14
Double
520
31
6.14
Double
520
31
6.14
Double
520
31
6.14
Double
520
31
6.14
Double
520
31
51
Specifications
Blowers
Handheld Blowers
Handheld Blowers(C4 Engine) Backpack Blowers
EB240S
EB2510
EB3410
EB803
EB803RT
Output (kW / ps)
EU
21.1
TBD
AUS
21.1
0.60 / 0.82
EU
24.0
0.70 / 0.95
EU
24.5
0.86 / 1.17
EU, AUS
34.0
1.10 / 1.50
AUS, Basic
79.2
3.14 / 4.27
AUS, Basic
79.2
3.14 / 4.27
Dry weight*1 (kg)
TBD
3.36
4.2
5.25
5.6
11.4
11.4
0.6
TBD
0.6
0.59
0.5
0.64
0.6
0.58
Max air volume (m3 / h) at actual usage point
TBD
600
522
426
Max air speed (m / sec)
TBD
59
74.2
79
Soft Start
Soft Start
¡
−
−
Decomp
¡
Round
Straight +
Flat
Round
Straight +
Flat
Round
Straight
M230
AUS
22.5
0.80 / 1.09
3.9
1020
0.55
0.73
−
M242S
EU
23.9
0.80 / 1.09
4.5
1040
0.62
0.53
Soft Start
M2510
EU
24.5
0.80 / 1.09
4.6
1040
0.60
0.54
Decomp
Configuration
Start Assist System
Throttle Lock
Nozzle type
EB220S
¡
Round
Straight
0.6
2.02
2.02
0.67
1.67
1.67
474(Round pipe)
1181(Ø74 pipe) 1181(Ø74 pipe)
486(Flat pipe)
87(Round pipe)
82(Ø74 pipe)
82(Ø74 pipe)
86(Flat pipe)
Decomp
−
−
¡
¡
−
Round
Round
Round
Straight +
Straight
Straight
Flat
(Ø65, 74)
(Ø65, 74)
Backpack
Blowers
(C4 Engine)
EB8520RT
EU
79.7
3.33 / 4.53
12.5(Ø74 pipe)
12.6(Ø65 pipe)
2.02
1.63
1260(Ø74 pipe)
1140(Ø65 pipe)
85(Ø74 pipe)
95(Ø65 pipe)
Decomp
¡
Round
Straight
(Ø65, 74)
*1 : Unit with blower pipe
Multi-Tool
Power Heads
Configuration
Output (kW / ps)
Dry weight*2 (kg)
Length*1 (mm)
Start Assist System
Manual Sprayers
Configuration
Dry weight*5 (kg)
Chemical tank capacity (L)
Pump type
Maximum Pressure (kgf / cm2)
Configuration
Output (kW / ps)
Dry weight*3 (kg)
Overall length (mm) Length with 10"bar assembly
Chain oil tank (L)
Start assist system
Guide bar length (inch)
*3 : Unit without attachment
P230S
Basic
22.5
0.80 / 1.09
5.4
2805
0.55
0.73
0.11
Soft Start
8, 10, 12
0.043
3/8
SP30BPE
AUS, Basic
5.2
11.4
Piston
6.3
SP40BPS
AUS, Basic
4.8
15.1
Piston
6.3
SP45BPS
AUS, Basic
5.6
17.0
Piston
6.3
*5 : Unit without spraying hose and nozzle
*2 : Unit without attachment
Pole Pruner
SP20HPS
AUS, Basic
2.1
7.6
Piston
3.2
Engine Sprayer
ES726
Configuration
AUS, Basic
22.5
Output (kW / ps)
0.60 / 0.82
Dry weight*4 (kg)
9.1
0.60
0.48
Chemical tank capacity (L)
26
Carburetor
Type
diaphragm
Type
Piston
Pump
Maximum Pressure (kgf / cm2)
25
Max. discharge (L / min)
7.0
*4 : Unit without spraying hose and nozzle
Spreaders
Configuration
Dry weight (kg)
Hopper capacity (L)
Handle Length (cm)
Tires (mm/ inch)
Engine Cutters
Configuration
Output (kW / ps)
Dry weight*6 (kg)
Ignition system
Start assist system
Applicable blade diameter (inch / mm)
Installable size of blade inner diameter (mm)
RS41
RS60
RS76
RS76S
EU, AUS, Basic EU, AUS, Basic EU, AUS, Basic EU, AUS, Basic
6.2
10.2
12.1
12.1
21.2
36.8
36.8
36.8
78.7
78.7
91.4
78.7
254 / 10
305 / 12
305 / 12
305 / 12
EC350
Basic
35.5
1.60 / 2.18
7.5
0.65
−
TCI
−
9 / 230
22
EC7500W
EU
73.5
3.40 / 4.62
10.2
0.8
2.45
CDI
Decomp
12 / 305
20, 22, 25.4
EC7600W
EU, AUS
73.5
3.40 / 4.62
10.6
0.8
2.45
CDI
Decomp
14 / 355
20, 22, 25.4
*5 : Unit without specified cutting blade
52
53
Today’s Technology
for Tomorrow’s Nature
YAMABIKO Corporation’s corporate mission is to “create the bridge
that bonds people and nature with the future”. The company’s essence,
that which expresses the key attributes which describe YAMABIKO as a
company, is stated as:
We, the Yamabiko Corporation,
would like to be known as a company
that grows its business by striving to sustain
a healthy environment today and for the future,
for people all over the world
Offer the best products and
service in the world.
Provide a sense of fulfillment
for all persons affiliated with
Yamabiko.
1955
Shindaiwa's first chain saw
"Hurricane"
1962
Electric chain saw A88
moves Shindaiwa into the
construction equipment industry.
54
1963
Electric chain saw A33
generated nationwide sales
1965
Thousands of deck saws are
exported to Peru
1973
A105 electric chain saw for the
"Do It Yourself" market.
1977
E305AV, Shindaiwa's
first engine chain saw
Support people and companies
committed to sustaining nature
and the environment.
Lead the industry through
creation of new markets and
customers, ultimately resulting
in growth for tomorrow.
YAMABIKO’S essence is composed of four Significant Beliefs.
Product History
4
Significant
Beliefs
1978
Electric chain saw A100,
introduced to USA market.
1979
The historical successful
model, A 104P, equipped
with automatic filing system.
1985
EB45 creates blower market
1993
1994
PB270E World's
first power broom
ECD488, the first engine cutter
with dust correction system
1999
AH230 long reach trimmer equipped with
easy head angle adjustment system
1995
MCD260 wins the
"Good Design Award"
1999
AH230 wins the
"OEM-mie award"
1999
E1039S Evolutional chain saw with
vertical mount engine layout
2002
T2500 equipped with the
first 4-cycle engine
developed by Shindaiwa
55
YAMABIKO Corporation’s
Global Operation
For over half a century, YAMABIKO Corporation has been serving the
professional landscaping market. Advanced engineering along with a
global manufacturing footprint have helped position the company as a
leader both now and into the future.
Quality product is only part of the equation. YAMABIKO Corporation
serves the global outdoor power equipment market through thousands
of Shindaiwa dealers in more than 80 countries. These well-trained
dealers provide unparalleled customer support with the highest level
of satisfaction. Millions of Shindaiwa units are in use today tending
agricultural fields, forests, gardens and homes.
We keep the world’s landscape healthy and green
with the latest environment-friendly technology
YAMABIKO Corporation sources its
products from three factories in Japan
and two factories overseas. All the
c o m p a n y’s f a c t o r i e s c a r r y t h e s a m e
quality standards and systems needed to
manufacture the highest quality products
in a consistent manner. In addition,
YAMABIKO Corporation is one of the few
manufacturers in its industry that produces
most key components in house or through
affiliated companies, extending greater
control over product integrity and quality.
Its factories operate with an environmental
conscience and strive to continually produce
environment-friendly products for global
use.
Crary industry, Inc.
Yamabiko Europe
Echo incorporated
Yamabiko corporation
Echo machinery (shenzhen) Co.,Ltd.
Echo taiwan Co.,Ltd.
YAMABIKO CORPORATION
Head office
56
MORIOKA PLANT
AGRICULTURAL MACHINERY DIVISION
YOKOSUKA PLANT
PRODUCTION ENGENEERING DEPT.
HIROSHIMA PLANT
INDUSTRIAL MACHINERY DIVISION
ECHO INCORPORATED (USA)
ECHO MACHINERY CO., Ltd. (PRC)
57

2013 Master Product Catalogue

Transcription

Similar documents

Dual Port, Four Barrel, Aluminium lnlet Manifold. Crane Cam and

Goshen Coach proudly introduces the latest in Hybrid innovations

Nanchang CJ-6

S-3 Oil Flyer - Cen-Pe-Co

technician training

1700, 1800 and 2-litre engines in a Bay

Suzuki GSX R 600

Energy Saving and CO2 Reduction by MACH Gas Engine Series

On the Dyno - New Age Okrasa

ZZ572/720R - Crate Engine Depot