Product Data Sheets - Leopold Polt Gastro

Transcription

1
YAMAHA Commercial Installed Solutions
Product Data Sheets
R1 18-06-2013
Table of contents
2
System designers rely on the product information provided by manufacturers in the form of data sheets, users manuals and
performance data. The more accurate and available the information, the more accurate and efficient systems can be designed.
This is why for Yamaha, the product information is an essential part of the product offering. This Data Sheets collection provides
easy accessible, concise and accurate product information of all relevant products for commercial installed sound. Further product information, photos, references, software tools and on-line training programmes for all Yamaha commercial audio products
are available on the YAMAHA and WORKproCA websites.
Loudspeakers
AV components
►High quality commercial installation loudspeakers
1
VXC series ceiling speakers
VXS series wall mount speakers
3
5
VS series wall mount speakers
►Cost effective installation loudspeakers
WORKproCA CS-T series ceiling speakers
7
9
WORKproCA CS-Pro series ceiling speakers
WORKproCA Neo-i series wall mount speakers
10
11
WORKproCA WSP-T series in-wall speakers
12
WORKproCA WSA series sub woofers
►Sound Reinforcement installation loudspeakers
13
Installation series high power loudspeakers
Club series SR loudspeakers
23
►Powered loudspeaker systems
27
DXR series powered SR loudspeakers
MS101 powered monitor
30
WORKproCA Neo-A series powered loudspeakers 31
32
Stagepas series compact SR system
34
36
38
40
43
Matrix processors & mixers
►MTX series matrix processors
MTX3, MTX5D matrix processors
►Analogue mixers
MG series analogue mixers
version 03-06-2013
44
46
56
Speaker mounting materials
U-brackets
Wall mount-brackets
Ceiling mount brackets
Miscellaneaus brackets
Array frames
58
59
59
60
60
Software*
MTX editor
YS3 speaker system simulator
61
63
* all software free downloadable through www.yamahaproaudio.com/downloads
Service & Support
Ordering
Information downloads
Contact information
Power amplifiers
►Commercial installation power amplifiers
XMV series multichannel power amplifiers
XP series 2 channel power amplifiers
►Cost effective installation power amplifiers
P series power amplifiers
WORKproCA PCA series power amplifiers
WORKproCA iWA power amplifier ►CD players
CD-RK series CD players
65
65
66
VXC series
1
Ceiling Speaker
VXC8 / VXC8W
VXC6 / VXC6W
VXC4 / VXC4W
A versatile lineup for clear consistent sound.
• Series offers three different woofer sizes in either black or white.
• Features newly customized transducers for superb music reproduction as well as crystal clear announcements.
• Designed with optimized bass-reflex tuning to offer a firm, tight low-end.
• Equipped with internal transformers that allow both high and low impedance drive, which can be selected by simply switching the tap
on the baffle.
• Anti-Drop tab allows the speakers to be mounted temporarily in the ceiling for improved safety and ease of installation.
• A flexible carrying band makes the speakers very portable and allows carrying multiple speakers at once.
• Come complete with O-rings and tile rails for safer and smoother installation.
• Overload protection circuit provided to protect speaker components.
Anti-Drop tab
2
VXC series
GENERAL SPECIFICATIONS
Model
VXC8 / VXC8W
VXC6 / VXC6W
VXC4 / VXC4W
Speaker Type
2-way, Bass-reflex
2-way, Bass-reflex
Full-range, Bass-reflex
LF
8" Cone
6.5" Cone
4" full-range
HF
1" Soft dome
0.75" Soft dome
100° conical
110° conical
Components
Coverage Angle*1
130° conical
8Ω
Nominal Impedance
Power Rating*2
NOISE
90W
75W
PGM
180W
150W
60W
90dB SPL
86dB SPL
87dB SPL
Sensitivity*3 (1W,1m)
Maximum SPL (Calculated, 1m)
30W
116dB SPL
111dB SPL
108dB SPL
55Hz - 20kHz
56Hz - 20kHz
80Hz - 20kHz
1x Euroblock (4P)
(Input: + / -, Loop Thru: + / -)
1x Euroblock (4P)
1x Euroblock (4P)
70V
60W, 30W, 15W, 7.5W
60W, 30W, 15W, 7.5W
30W, 15W, 7.5W, 3.8W
100V
60W, 30W, 15W
60W, 30W, 15W
30W, 15W, 7.5W
Color (Grille)
VXC8: Black / VXC8W: White
Dimensions (Diameter x H)
Ø325 x 259mm (Ø12.8" x 10.2")
Ø286 x 205mm (Ø11.3" x 8.1")
Ø225 x 195mm (Ø8.9" x 7.7")
Weight
6.6kg (14.6lbs)
4.4kg (9.7lbs)
2.6kg (5.7lbs)
Included accessories
O-ring, Tile Rail, Cutout Template, Screws, Owner's Manual
Frequency Range*3
-10dB
Connectors
Transformer Taps
*1 500Hz - 4kHz
*2 IEC
*3 Half space
DIMENSIONS
unit : mm
VXC8 / VXC8W
VXC6 / VXC6W
ø279
205
189
259
241
ø241
ø286
ø325
VXC4 / VXC4W
195
182
ø180
ø225
VXS Series
3
Surface Mount Speaker
VXS8 / VXS8W
VXS5 / VXS5W
VXS10S / VXS10SW
VXS10ST / VXS10STW
Sophisticated sound and design for matching any application.
• Series comprises two full-range models and two subwoofers available in either black or white.
• Features newly customized transducers for superb music reproduction as well as crystal clear announcements.
• Full-range models are equipped with internal transformers that allows operation at both high and low impedance.
• VXS10ST(W) comes equipped with an internal transformer, adding stronger bottom end in high impedance systems.
• VXS8(W) and VXS5(W) offer IP35 rated protection, ensuring use in outdoor applications.
• Subwoofers feature 10" dual voice coil with high pass outputs for satellite speakers.
• Comes with a dedicated bracket for safe, trouble-free speaker installation.
Impedance selector
4
VXS Series
Model
VXS8 / VXS8W
VXS5 / VXS5W
VXS10S /VXS10SW
Speaker Type
2-way, Bass-reflex
2-way, Bass-reflex
Subwoofer
8" Cone
5.25" Cone
VXS10ST / VXS10STW
Subwoofer
Components
LF
HF
1" Soft dome
0.75" Soft dome
-
Coverage Angle*1
HxV
100° x 100°
120° x 120°
-
8Ω
Nominal Impedance
Satellite Impedance
10" Dual Voice Coil
8Ω + 8Ω
8Ω + 8Ω
-
-
NOISE
90W
75W
100W + 100W
PGM
180W
150W
200W + 200W
-
91dB SPL
89dB SPL
96dB SPL
96dB SPL
Maximum SPL (Calculated, 1m)
117dB SPL
114dB SPL
125dB SPL
Frequency Range*2
51Hz - 20kHz
62Hz - 20kHz
1x Euroblock (4P)
1x Euroblock (4P)
Input: 1x Euroblock (4P)
(CH1: + / -, CH2: + / -)
Satellite Output: 1x Euroblock (4P)
(ST 1: + / -, ST 2: + / -)
Input: 1x Euroblock (4P)
Satellite Output: 1x Euroblock (4P)
(ST 1: + / -, ST 2: + / -)
70V
60W, 30W, 15W, 7.5W
30W, 15W, 7.5W, 3.8W
-
200W, 100W, 50W, 25W
100V
60W, 30W, 15W
30W, 15W, 7.5W
-
Environmental
IP35
IP35
Color (Grille)
VXS8:Black / VXS8W:White
VXS5:Black / VXS5W:White
VXS10S: Black, VXS10SW: White
VXS10ST: Black, VXS10STW: White
Dimensions (W x H x D)
278 x 430 x 239mm
(10.9" x 16.9" x 9.4")
176 x 280 x 163mm
(6.9" x 11.0" x 6.4")
260 x 500 x 389mm
(10.2" x 19.7" x 15.3")
260 x 500 x 389mm
(10.2" x 19.7" x 15.3")
Weight
8.2kg (18.1lbs)
3.6kg (7.9lbs)
16.5kg (36.4lbs)
19.5kg (43.0lbs)
Wall / Ceiling mount bracket,
Terminal cover
Wall / Ceiling mount bracket,
Terminal cover
Wall mount bracket
Wall mount bracket
Power Rating*1
Sensitivity*2 (1W,1m)
-10dB
Connectors
Transformer Taps
-
45Hz - 250Hz
200W, 100W, 50W
-
*1 IEC
*2 Half space
DIMENSIONS
unit : mm
VXS5 / VXS5W
R4 00
R60 0
VXS8 / VXS8W
4-M5
278
60
176
239
500
VXS10S / VXS10SW
VXS10ST / VXS10STW
260
60 50
60 105
430
280
4-M6
360
389
163
60
VS series
5
Surface Mount Speaker
VS6
VS4
VS6W
VS4W
Outstanding sonic performance indoors or out, plus visual sophistication that
will complement any décor.
• Compact surface mount speakers with superior sound quality and sleek, functional design.
• Series comprises two models: the VS6 (6.5" woofer) and VS4 (4" woofer) - both models feature a 1" balanced dome tweeter and are
available in Black or White.
• Waterproof construction meeting the IEC60529 IPX3 rating requirements for outdoor usage.
• Internally mounted transformers allowing operation in 70V or 100V distributed sound systems.
• Dedicated, color-matched steel U-bracket enclosed for horizontal or vertical installation.
• Paintable enclosure and grill to match any decor.
6
VS series
Model
Components
VS6 / VS6W
VS4 / VS4W
LF
6,5" (160mm) cone driver
4" (100mm) cone driver
HF
1" (25mm) balanced dome tweeter
Coverage Angle (H x V)
90° x 90°
Crossover Mode
Passive only
Passive Crossover Frequency
15kHz
Nominal Impedance
8Ω
Power Rating*1 (IEC, 100hours)
15kHz
NOISE
25W
15W
PGM
50W
30W
MAX
Sensitivity (1W,1m)
Maximum SPL*2 (Calculated, 1m)
Frequency Range (Full space)*3
110° x 110°
100W
60W
90dB SPL
88dB SPL
110dB SPL (100W)
106dB SPL (60W)
-10dB
80Hz - 20kHz
100Hz - 20kHz
70V
25W, 12.5W, 6.3W, 3.1W
15W, 7.5W, 3.8W, 1.9W
100V
25W, 12.5W, 6.3W
15W, 7.5W, 3.8W
2 pairs of barrier strip (parallel-wired)
Connectors
Transformer Taps
Overload Protection
Power limiting to protect the woofer
Waterproof
IEC60529 IPX3 splash proof rating
Enclosure
Shape
Rectangular
Type
Vented
Material
HIPS, 94-HB
Finish
VS6, VS4: Black
VS6W, VS4W: White
Grill
Power coated perforated steel
Suspension attachments
U-bracket (4 x ø5.5mm and 2 x ø11mm holes)
Dimensions (Bracket is not included)
(W x H x D in vertical cabinet orientation)
190 x 308 x 219 mm (7 1/2" x 12 1/8" x 8 5/8")
152 x 243 x 172 mm (6" x 9 9/16" x 6 3/4")
1.9kg (4.2lbs)
Net Weight (Bracket is not included, 1 piece)
2.8kg (6.2lbs)
U-bracket, Owner's Manual, Retaining knob, Terminal cover, Terminal cover screw
Packaging
Packaged in pair
*1 IEC shaped pink noise with 6dB crest factor.
*2 Calculated based on power rating and sensitivity, exclusive of power compression.
*3 Free field 4π
DIMENSIONS
unit : mm
VS6 / VS6W
ø11
ø5.5
190
215
264
3
178
198
228
308
305
ø20
46
40
Bore for safety wire
60
Retaining pin
73
VS4 / VS4W
ø11
ø5.5
3
152
118
138
168
169
209
32
37
Bore for safety wire
Retaining pin
56
243
240
244
240
ø20
64
WORKproCA CS series
7
CS T series
Cost efficient ceiling speakers.
CS 8T
CS 6T
CS 5T
TECHNICAL DATA CS 8T
270 mm.
The following loudspeakers have been designed to offer a professional and affordable solution.
They are all suited for small audio installations like retail stores
and small rooms. Their installation is particularly easy due to their
low weight and quick installation system. The clean appearance
wins favour with architects and interior designers alike.
85 mm.
Made of strong ABS plastic, to ensure a long lifetime and protection from heat.
Elements
Power taps (70 V)
Power taps (100 V)
Features
Low impedance load
- Ceiling speakers designed for cost conscious installations.
-“Whizzer” cone for extended HF response.
- Suitable for high impedance 70/100 V voltage
line and low impedance (8Ω) installations.
- High resistance ABS housing with metal grille.
- Rotating screw clamps for fast installation.
Sensitivity
Max SPL
Frequency response
Mounting hole diameter
1.5 W (3k1 Ω) / 3 W (1k5 Ω).
3 W (3k3 Ω) / 6 W (1k6 Ω).
8 Ω (6 W).
92 dB @ 1W
50 Hz - 18 kHz.
240 mm.
ABS.
Material (grille)
Iron.
Dimensions
1m.
95 dB
Material (front baffle)
Weight
270 x 85 mm (Diameter x D).
1.2 kg.
203 mm.
230 mm.
8” Woofer.
80 mm.
80 mm.
Elements
Power taps (70 V)
Power taps (100 V)
Low impedance load
Sensitivity
Max SPL
Frequency response
6.5” Woofer.
Elements
1.5 W (3k1 Ω) / 3 W (1k5 Ω).
3 W (3k3 Ω) / 6 W (1k6 Ω).
8 Ω (6 W).
88 dB @ 1W
Power taps (70 V)
Power taps (100 V)
Low impedance load
1m.
95 dB
110 Hz - 18 kHz.
200 mm.
Sensitivity
Max SPL
Frequency response
5” Woofer.
1.5 W (3k1 Ω) / 3 W (1k5 Ω).
3 W (3k3 Ω) / 6 W (1k6 Ω).
8 Ω (6 W).
88 dB @ 1W
110 Hz - 18 kHz.
170 mm.
ABS.
ABS.
Material (grille)
Iron.
Material (grille)
Iron.
Dimensions
Weight
0.9 kg.
Dimensions
Weight
1m.
95 dB
0.7 kg.
WORKproCA CS series with back can
8
CS T series
Cost efficient ceiling speakers with back can.
CS 60T
CS 80T
TECHNICAL DATA CS 80 T
These ceiling speakers are designed to provide quality sound for
commercial applications such as background music and paging,
utilizing high quality coaxial transducers.
Thanks to their power output level selector, they are suitable for high
impedance (70 V, 100 V) or low impedance (8 Ω) installations. The
crossover and transformer are contained within a metal back can
enclosure for improved response.
185 mm.
270 mm.
CS 50T
Features
8” Woofer + 0.5” Tweeter.
2.5 W (1k9 Ω) / 5 W (980 Ω) / 10 W (490 Ω) / 20 W (245
Ω) / 40 W (122 Ω).
5 W (2 kΩ) / 10 W (1kΩ) / 20 W (500 Ω) /
40 W (250 Ω).
Low impedance load
Sensitivity
Max SPL
Frequency response
8 Ω (40 W).
88 dB @ 1W
50 Hz - 20 kHz.
240 mm.
ABS.
Material (grille)
Iron.
Dimensions
Weight
1m.
103 dB
3.1 kg.
Elements
Power taps (70 V)
150 mm.
230 mm.
6.5” Woofer + 0.5” Tweeter.
1.9 W (2k5 Ω) / 3.8 W (1k3 Ω) / 7.5 W (653 Ω) / 15 W
Elements
Power taps (70 V)
(326 Ω) / 30 W (163 Ω).
Power taps (100 V)
3.8 W (2k6 Ω) / 7.5 W (1k3 Ω) / 15 W (666 Ω) / 30 W
Sensitivity
Max SPL
Frequency response
1.25 W (3k9 Ω) / 2.5 W (1k9 Ω) / 5 W (980 Ω) / 10 W
2.5 W (4 kΩ) / 5 W (2 kΩ) / 10 W (1kΩ) /
20 W (500 Ω).
8 Ω (30 W).
88 dB @ 1W
(490 Ω) / 20 W (245 Ω).
Power taps (100 V)
(333 Ω).
Low impedance load
Low impedance load
1m.
102 dB
90 Hz - 20 kHz.
200 mm.
Sensitivity
Max SPL
Frequency response
8 Ω (20 W).
88 dB @ 1W
100 Hz - 20 kHz.
170 mm.
ABS.
ABS.
Material (grille)
Iron.
Material (grille)
Iron.
Weight
2.3 kg.
Dimensions
Weight
1m.
101 dB
Dimensions
145 mm.
Power taps (100 V)
- Ceiling speakers designed for installations such as
halls and retail stores.
- Two way system with woofer and tweeter for an excellent sound quality.
-Coaxial design with separate tweeter for superior
high frequency response.
- Suitable for high impedance (70 V, 100 V)
voltage line and low impedance (8Ω) installations.
- High resistance ABS housing with metal grille.
203 mm.
Elements
Power taps (70 V)
1.8 kg.
WORKproCA CS PRO series with back can
CS PRO series
Cost efficient ceiling speakers with back can.
A bass reflex design, coupled with extended enclosure
volume and bass resonance tube provide better bass
extension.
CS 6 PRO
CS 4 PRO
Efficient and smart solutions for any ceiling audio installation.
WORKproCA’s premium ceiling loudspeaker provide the highest quality. The CS PRO
series boast the highest sound quality and widest range of features within the
WORKproCA ceiling speakers range.
Features
The CS 4 Pro and CS 6 Pro ceiling speakers feature a true two way design with discrete
material (mylar dome tweeter and polypropylene cone with rubber surround bass driver).
A power output level selector, being suitable for high impedance (70 V, 100 V) voltage line
and low impedance (8 Ω) installations. They are manufactured from a high impact resistance ABS baffle, metal grille, and a metal back can enclosure containing the crossover
network and transformer.
The power tap selector is accessible from the front of the speaker to allow levels to be adjusted after initial installation. They also have a detachable Euroblock connector, contained
within a metal compartment for ease of installation.
Elements
Power taps (70 V)
0.5 W (9k8 Ω) / 1 W (4k9 Ω) / 2 W (2k4 Ω) /
Elements
Power taps (70 V)
4 W (1k2 Ω) / 8 W (600 Ω).
Power taps (100 V)
Low impedance load
Sensitivity
Max SPL
Frequency response
Material (grille)
Dimensions
Weight
1 W (10 kΩ) / 2 W (5 kΩ) / 4 W (2k5 Ω) / 8 W (1k2 Ω).
3 W (1k6 Ω) / 5 W (980 Ω) / 15 W (326 Ω) /
5 W (2 kΩ) / 15 W (666 kΩ) / 30 W (333 Ω) / 50 W (200
Ω).
1m.
97 dB
80 Hz - 20 kHz.
170 mm.
ABS.
Aluminium.
2.2 kg.
6.5” Woofer + 0.75” Tweeter.
30 W (163 Ω) / 50 W (98 Ω).
Power taps (100 V)
8 Ω (30 W).
88 dB @ 1W
190 mm.
240 mm.
TECHNICAL DATA CS 6 PRO
130 mm.
185 mm.
TECHNICAL DATA CS 4 PRO
- Ceiling speakers designed for installations
like halls and retail stores.
- Two way design with discrete woofer and
tweeter with low frequency tube resonator for
excellent sound quality.
- Suitable for high impedance (70 V,
100 V) voltage line and low impedance
(8 Ω) installations.
- High resistance ABS housing with aluminium
and metal rear cover.
-Safety loop for secondary safety wire.
Low impedance load
Sensitivity
Max SPL
Frequency response
Material (grille)
Dimensions
Weight
8 Ω (60 W).
88 dB @ 1W
1m.
104 dB
60 Hz - 20 kHz.
220 mm.
ABS.
Aluminium.
3 kg.
9
10
WORKproCA CS PRO series with back can
WSP T series
Cost efficient in-wall speakers
WSP 1T
WSP 2T
WSP 3T
TECHNICAL DATA WSP 3T
270 mm.
226 mm.
WSP T series includes three in-wall speakers, all designed for both
background music systems and other commercial audio applications.
329 mm.
370 mm.
Elements
8” Woofer + 2.5” Tweeter + 1” silk dome.
Power taps (70 V)
5 W (980 Ω) / 10 W (490 Ω) / 15 W (326 Ω).
Power taps (100 V)
10 W (1k Ω) / 20 W (500 Ω) / 30 W (333 Ω).
Power handling
Sensitivity
Max SPL
92 dB @ 1W
- In-wall/in-ceiling speakers for background music and other
commercial audio applications.
- Suitable for 70/100 V voltage line installations.
- Rectangular shape and shallow design.
- Large frequency range for optimum results, even at low
frequency.
-Rotating screw clamps hidden behind the grille allow easy
mounting into most standard partition/cavity or drywall
systems.
1m.
106 dB
30 Hz - 20 kHz.
Mounting hole dimensions
330 x 230 mm.
Material (housing)
ABS.
Material (grille)
Iron.
Weight
Features
40 W (8 Ω)
Frequency response
Dimensions
95 mm.
Moulded in high resistance ABS plastic, these shallow depth
speakers have a rectangular shape and feature an efficient 2 way
system with passive crossover filter (3-way system for WSP 3T).
They can be used with constant voltage line (70/100 V) installations.
Due to their wide frequency range, they provide optimum results
even at low frequencies.
370 x 270 x 95 mm.
2.5 kg.
140 mm.
190 mm.
191 mm.
235 mm.
297 mm.
345 mm.
Elements
6.5” Woofer + 1” Tweeter.
200 mm.
260 mm.
90 mm.
Elements
5” Woofer + 1” Tweeter.
Power taps (70 V)
5 W (980 Ω) / 7.5 W (653 Ω) / 10 W (490 Ω).
Power taps (70 V)
2 W (2k5 Ω) / 4 W (1k2 Ω) / 6 W (816 Ω).
Power taps (100 V)
10 W (1k Ω) / 15 W (666 Ω) / 20 W (500 Ω).
Power taps (100 V)
4 W (2k5 Ω) / 8 W (1k2 Ω) / 12 W (833 Ω).
Power handling
Sensitivity
Max SPL
30 W (8 Ω)
90 dB @ 1W
Power handling
1m.
103 dB
Sensitivity
Max SPL
Frequency response
45 Hz - 20 kHz.
Frequency response
303 x 195 mm.
20 W (8 Ω)
88 dB @ 1W
50 Hz - 20 kHz.
211 x 144 mm.
Material (housing)
ABS.
Material (housing)
ABS.
Material (grille)
Iron.
Material (grille)
Iron.
Dimensions
Weight
345 x 235 x 90 mm.
1.52 kg.
Dimensions
Weight
1m.
97 dB
260 x 190 x 59 mm.
1.3 kg.
59 mm.
WORKproCA Neoi series
11
NEOi series
Cost efficient wall mount loudspeakers.
NEO 50 i
NEO 40 i
NEO 40 i
148 mm.
NEO 80 i
NEO 60 i
134 mm.
210 mm.
Four models for all your projects!
Features
The NEO i series unites sound quality and elegant
design perfectly making them instantly suitable for all
architect & interior designer led projects.
NEO 50 i / NEO 50 Ai
166 mm.
244 mm.
171 mm.
To fit all installation requirements, there are four models ranging from the NEO 40i to the NEO 80i available with increasing output powers and bass response.
Two self-powered versions are also available as the
NEO 50 Ai and NEO 60 Ai (see next page).
All the loudspeakers are suitable for low impedance
and constant voltage line. Installers can choose a black
or white finish, using these loudspeakers as another
element of the interior decor.
NEO 60 i / NEO 60 Ai
175 mm.
An aluminium grille and IP54 rating combine to allow
outdoor operation when protected from direct exposure
to water (e.g. under a canopy) as well as indoor operation in humid environments.
290 mm.
200 mm.
- Loudspeakers designed for fixed installations.
- Available in two colours (black and white) with an elegant design.
- Aluminium grille for a long lifetime.
- Wall-mount bracket with fast mounting system.
-Mounting bracket enables pan and tilt.
- Optional metal bracket available.
-Euroblock screw terminal for
easier installation.
NEOi loudspeakers are
available in black and white.
NEO 80 i
240 mm.
370 mm.
260 mm.
The NEO i series wall-mount bracket allows quick and easy installation. The design allows the
orientation of the speakers to be easily adjusted to the optimum angle for the desired coverage.
Technical Data
Type
Elements
Power taps (100 V)
Low impedance position
Frequency response
Sensitivity
Max SPL
Dimensions
Weight
NEO 40 i
NEO 50 i
NEO 60 i
NEO 80 i
2 way loudspeaker.
2 W (5 kΩ) / 4 W (2k5 Ω) /
8 W (1k2 Ω) / 16 W (625 Ω).
8 Ω (30 W).
70 Hz - 20 kHz.
87 dB @ 1W 1m.
99 dB
148 x 210 x 134 mm
(WxHxD).
2 way loudspeaker.
2 W (5 kΩ) / 4 W (2k5 Ω) /
8 W (1k2 Ω) / 16 W (625 Ω).
8 Ω (40 W).
60 Hz - 20 kHz.
88 dB @ 1W 1m.
100 dB
171 x 244 x 166 mm
(WxHxD).
2 way loudspeaker.
4 W (2k5 Ω) / 8 W (1k2 Ω) /
16 W (625 Ω) / 32 W (312 Ω).
8 Ω (60 W).
70 Hz - 20 kHz.
89 dB @ 1W 1m.
101 dB
200 x 290 x 175 mm
(WxHxD).
2 way loudspeaker.
8” Woofer + 1” Tweeter.
4 W (2k5 Ω) / 8 W (1k2 Ω) /
16 W (625 Ω) / 32 W (312 Ω).
8 Ω (70 W).
52 Hz - 20 kHz.
87 dB @ 1W 1m.
101 dB
260 x 370 x 240 mm
(WxHxD).
1.95 kg.
2.3 kg.
3.1 kg.
4.95 kg.
12
WORKproCA WSA SUB series
WSA SUB series
Cost efficient subwoofers.
WSA 10 SUB
320 mm.
460 mm.
540 mm.
WSA 12 SUB
WSA 10 SUB
The WSA 10 SUB and WSA 12 SUB are designed for any application needing low frequency reinforcement, and are ideal for providing anything from subtle low-end warmth
for business music applications to full bass reproduction for applications requiring foreground music.
WSA 12 SUB
625 mm.
370 mm.
530 mm.
The ideal complement to the NEO series, the WSA 10 SUB and the WSA 12 SUB features 10 and 12 inch drivers respectively, with plywood construction, a durable paint finish
and a built in low pass filter to simplify signal processing.
They also feature a very compact floor footprint to enable them to be discretely positioned
within the installation. A durable metal grille provides protection.
Features
- Subwoofers designed for low frequency reinforcement.
- Superior low frequency response for true sub-bass.
- Low-pass built-in filter.
- Cabinet manufactured from high quality plywood.
-Large bass ports for deep sub-bass.
Rear view
Technical Data
Type
Elements
Output power
Max. power
WSA 10 SUB
WSA 12 SUB
Subwoofer.
Subwoofer.
1 x 10” woofer.
1 x 12” woofer.
250 W RMS.
400 W RMS.
500 W.
800 W.
Impedance
8 Ω.
8 Ω.
Sensitivity
94 dB @ 1W 1m.
96 dB @ 1W 1m.
118 dB.
122 dB.
40 Hz - 400 Hz (SPL -10 dB).
35 Hz - 400 Hz (SPL -10 dB).
250 Hz (-3 dB) / (-12 dD / oct.)
250 Hz (-3 dB) / (-12 dD / oct.)
2 x Speaker 4 Pole chassis connector.
2 x Speaker 4 Pole chassis connector.
320 x 540 x 460 mm (WxHxD).
370 x 625 x 530 mm (WxHxD).
15.8 kg.
17.2 kg.
Max SPL
Frequency response
LPF filter
Input / link connectors
Dimensions
Weight
Installation Series
13
Speaker System
IF2208
IF2205
IF2108
IF2208
Rear Panel
IF2108
Rear Panel
IF2205 Rear Panel
Compact two-way full-range models with 8-inch or 5-inch woofers install easily
in tight situations.
IF2208 & IF2108
• Sound and phase characteristics matched with all other Installation Series
models.
IF2205
• Sound and phase characteristics matched with all
other Installation Series models.
• Single 8” woofer (IF2108) or dual 8” woofers (IF2208) plus 1.7" high-
• Dual 5” woofers plus 1" high-frequency compression
• 90° x 60° dispersion pattern.
• Multi-angle cabinet design enables floor monitor applications.
• Horn can be rotated 90-degrees, allowing vertical or horizontal mounting.
• Eleven 10mm-screw (M10) and six 8mm-screw (M8) suspension points
• 90° x 60° dispersion pattern.
• Horn can be rotated 90-degrees, allowing vertical or
• Durable black or white finish (can be painted to match any interior).
• Optional matching U-bracket available.
• Parallel-wired two Neutrik NL4 and barrier strip connectors.
• Pole socket* featured for easy pole mounting.
• Durable black or white finish (can be painted to match
frequency compression driver with 1" exit.
driver with 1" exit.
provided for flexible rigging.
horizontal mounting.
• Six 8mm-screw (M8) and two 6mm-screw (M6)
suspension points provided for flexible rigging.
any interior).
• Matching U-bracket available as an option.
• Barrier strip connectors.
*Warning when using the pole socket
Make sure that the pole is mounted vertically when you mount the speaker to the pole.
Please refer to the Owner's Manual for details.
Brackets
U brackets
Heavy duty U brackets
wall & ceiling brackets
UB2108, UB2208
VUB2108, VUB2208
BWS251
U-Brackets for IF2108, IF2208
UB2205
U-Brackets for IF2205
vertical U-Bracket for IF2108, IF2208
HUB2205
horizontal U-Bracket
Wall-Brackets
BCS251
Ceiling-Brackets
BBS251
Baton-Brackets
WM2205, 2008
Wall-Brackets
14
Installation Series
Model
IF2208 (W)
Nominal coverage @-6dB (Horizontal x Vertical)
90° x 60°(rotatable)
Nominal impedance
8Ω
Power rating *1
IF2108 (W)
IF2205 (W)
NOISE
200W
100W
100W
PGM
400W
200W
200W
MAX
800W
400W
400W
Sensitivity (1W, 1m)
95dB SPL
Continuous SPL (calculated)
118dB SPL
115dB SPL
Peak SPL (calculated)
124dB SPL
121dB SPL
115dB SPL
LF
2 x 8" woofer
2" voice coil
8" woofer
2" voice coil
2x 5" woofer
1" voice coil
HF
Rotatable constant directivity horn,
1" exit, 1.7" voice coil compression driver
Components
89dB SPL
109dB SPL
Rotatable constant directivity horn,
1" exit, 1" voice coil compression driver
Frequency range (-10dB) *2
55Hz-19kHz
Passive Crossover Frequency *3
1.4kHz
Connectors
2 x NL4 and barrier strip, wired in parallel
Shape
Multi-angle wedge
283 x 673 x 250mm (11.1" x 26.5" x 9.8")
283 x 448 x 250mm (11.1" x 17.6" x 9.8")
457 x 146 x 226mm (18.0" x 5.8" x 8.9")
Weight
19.0kg (42.0lbs)
14.0kg (31.0lbs)
7.5kg (17.0lbs)
Flying hardware
11 x M10, 6 x M8
Optional accessories
UB2208(W)
UB2108(W)
UB2205(W)
3rd Party
Accessories
Omnimount (US)
60.0 series
60.0 series
20.5 series
Multimount (US, Allen products)
020, 022 series
020, 022 series
080 series
Powerdrive (UK)
100 series
100 series
75 series
Ohashi (Japan)
SPH-140, SPA-140, BCH-140 series
65Hz-19kHz
1.6kHz
1.7kHz
Barrier strip
Rectangular
6 x M8, 2 x M6
*1 2 hours, IEC *2 Yamaha recommended DSP configuration, full-space *3 At this frequency, the transducers produce equal sound pressure levels.
DIMENSIONS
unit : mm (inch)
Center of balance
IF2108(W)
41.3(1.63)
45
15˚
4-M10
169(6.64)
283(11.14)
41.3(1.63)
169(6.64)
283(11.14)
113(4.43)
142(5.57)
113(4.43) 29(1.14)
4-M10
2-M8
2-M8
M10
2-M8
110(4.33)
226(8.90)
127(5.00)
146(5.75)
457(18.00)
76.2(3.00)
2-M6
50.8(2.00)
110(4.33)
224(8.81)
219(8.61)
.00)
)
127(5
111(4.38)
(2.75
127(5
111(4.38)
.00)
69.9
4-M8
229(9.00)
.00)
41.3(1.63)
4-M8
IF2205(W)
165(6.50)
51(2
51(2
.00)
41.3(1.63)
337(13.25)
673(26.50)
365(14.38)
127(5.00)
448(17.63)
M10
127(5.00)
591(23.25)
140(5.50)
165(6.50)
178(7.00)
250(9.85)
6-M10
102(4.02)
87(3.42)
140(5.51)
165(6.50)
15˚
178(7.00)
250(9.85)
6-M10
102(4.02)
87(3.42)
45
˚
˚
IF2208(W)
4-M8
69.9
(2.75
)
Installation Series
15
Speaker System
IF2112
IF2112 (M)
Rear Panel
IF2112/AS
Rear Panel
IF2112M
IF2112/AS
IF2112
IF2112/AS
Two-way full-range models with 12-inch woofers deliver extraordinarily
well-balanced sound.
• Sound and phase characteristics matched with all other Installation Series models for optimum performance in any combination.
• 12" woofer specially treated for superior sound and durability.
• 3" high-frequency compression driver with 1.4" exit (IF2112 and IF2112/AS) or 1.7" high-frequency compression driver with 1.4" exit
(IF2112M).
• Three horn dispersion patterns available for IF2112 and IF2112M: 60° x 40° (/64), 90° x 50° (/95), and 90° x 90° (/99).
• Horn can be rotated 90-degrees for vertical or horizontal mounting.
• Switchable between passive and bi-amp operation.
• Fifteen 10-mm (M10) screw and four 8-mm (M8) screw suspension points provided for flexible rigging on the IF2112 and IF2112M; 16
10-mm screw (M10) points on the IF2112/AS.
• Optional matching array frame and U-bracket available for the IF2112 and IF2112M.
• Optional matching U-bracket available for the IF2112/AS.
• Parallel-wired Neutrik NL4 and barrier strip connectors.
• IF2112/AS cabinet design is ideal for floor monitor use. Also features pole socket* for pole mounting.
ARRAY FRAMES & U-BRACKETS
Array frames
U-brackets
Heavy duty U-brackets
HAF3-2112
UB2112
VUB2112
Horizontal Array Frame
U-Brackets for horizontal mounting
BGVC1 approved vertical U-Bracket
HAF2-2112
VAF2-2112
Vertical Array Frame
Download the Installation Series Rigging Guide from Yamaha's website for rigging details:
http://www.yamahaproaudio.com/global/en/downloads/systemdesign/speaker_processor_settings/
16
Installation Series
Model
IF2112/64
IF2112/95
IF2112/99
IF2112/AS
60°x 40°(rotatable)
90°x 90°
60-100°x 60°(rotatable)
Nominal impedance
8Ω
108dB SPL
106dB SPL
108dB SPL
128dB SPL
126dB SPL
128dB SPL
134dB SPL
132dB SPL
134dB SPL
Passive
LF:8Ω, HF:8Ω
Bi-amp MF/HF
Passive *1
Power rating
NOISE
600W
PGM
1200W
MAX
2400W
Bi-amp LF/HF *2 NOISE
Sensitivity
(1W, 1m)
LF:1400W, HF:220W
MAX
LF:2800W, HF:440W
Passive
Bi-amp
96dB SPL
LF
HF
Continuous SPL
(calculated)
Passive
Bi-amp
LF
Passive
Bi-amp
Components
96dB SPL
110dB SPL
124dB SPL
HF
Peak SPL
(calculated)
LF:700W, HF:110W
PGM
124dB SPL
130dB SPL
130dB SPL
LF
130dB SPL
HF
136dB SPL
LF
12" woofer, 4" voice coil
HF
Rotatable constant directivity horn, 1.4" exit, 3" voice coil compression driver
50Hz-20kHz
900Hz
Connectors
2 x NL4 and barrier strip, wired
in parallel
Shape
30 degrees trapezoidal
Multi-angle wedge
378 x 695 x 454mm (14.9" x 27.4" x 17.9")
378 x 695 x 333mm (14.9" x 27.4"
x 13.1")
1.2kHz
1.1kHz
Weight
31.0kg (68.0lbs)
29.0kg (64lbs)
Flying hardware
15 x M10, 4 x M8
16 x M10
UB2112, HAF2-2112, HAF3-2112, VAF2-2112
UB2112
3rd Party
Accessories
Omnimount (US)
120.0 series
-
120 series
-
Powerdrive (UK)
120 series
-
Model
Nominal impedance Passive
Bi-amp MF/HF
Power rating
Passive *1
NOISE
PGM
MAX
PGM
MAX
Sensitivity
Passive
(1W, 1m)
Bi-amp
LF
HF
Continuous SPL
Passive
(calculated)
Bi-amp
LF
HF
Peak SPL
Passive
(calculated)
Bi-amp
LF
HF
Components
LF
HF
Connectors
Shape
Weight
Flying hardware
3rd Party
Omnimount (US)
Accessories
Powerdrive (UK)
IF2112M/64
IF2112M/95
8Ω
LF:8Ω, HF:8Ω
350W
700W
1400W
LF:400W, HF:60W
LF:800W, HF:120W
LF:1600W, HF:240W
95dB SPL
96dB SPL
110dB SPL
108dB SPL
120dB SPL
121dB SPL
128dB SPL
126dB SPL
126dB SPL
127dB SPL
134dB SPL
132dB SPL
12" woofer, 3 " voice coil
Rotatable constant directivity horn, 1.4" exit, 1.7" voice coil compression driver
55Hz-20kHz
1kHz
1.1kHz
378 x 695 x 454mm (14.9" x 27.4" x 17.9")
28.0kg (61.0lbs)
15 x M10, 4 x M8
UB2112, HAF2-2112, HAF3-2112, VAF2-2112
120.0 series
120 series
120 series
IF2112M/99
90°x 90°
108dB SPL
126dB SPL
132dB SPL
1.1kHz
*1 2hours, IEC *2 AES *3 Bi-amp mode, Yamaha recommended DSP configuration, full-space *4 At this frequency, the transducers produce equal sound pressure levels.
41.3(1.63)
327(12.86)
613(24.13)
695(27.38)
88.9(3.50)
233(9.17)
378(14.89)
6-M10
41.3(1.63)
108(4.23)
41.3(1.63)
183(7.21)
191(7.50)
333(13.11)
15˚
133(5.25)
191(7.50)
M10
174.6(6.88)
6-M10
41.3(1.63)
233(9.17)
378(14.89)
348(13.69)
613(24.13)
41.3(1.63)
IF2112(M)/64/95/99
40˚
327(12.86)
15˚
41.3(1.63)
8-M10
267(10.50)
304(11.96)
454(17.86)
155(6.12)
695(27.38)
Installation Series
17
DIMENSIONS
Center of balance
unit : mm (inch)
IF2112/AS
25(1.00)
121(4.76)
9-M10
4-M8
M10
164(6.45)
Installation Series
18
Speaker System
IF2115
IF2115 (M)
Rear Panel
IF2115/AS
Rear Panel
IF2115M
IF2115/AS
IF2115
IF2115/AS
Two-way full-range models with 15-inch woofers for solid low-frequency response.
• Sound and phase characteristics matched with all other Installation Series models for optimum performance in any combination.
• 15" woofer specially treated for superior sound and durability.
• 3" high-frequency compression driver with 1.4" exit (IF2115 and IF2115/AS) or 1.7" high-frequency compression driver with 1.4" exit
(IF2115M).
• Three horn dispersion patterns available for IF2115 and IF2115M: 60° x 40° (/64), 90° x 50° (/95), and 90° x 90° (/99).
• Horn can be rotated 90-degrees for vertical or horizontal mounting.
• Switchable between passive and bi-amp operation.
• Fifteen 10-mm (M10) screw and four 8-mm (M8) screw suspension points provided for flexible rigging on the IF2115 and IF2115M; 16
10-mm screw (M10) points on the IF2115/AS.
• Optional matching array frame and U-bracket available for the IF2115 and IF2115M.
• Optional matching U-bracket available for the IF2115/AS.
• IF2115/AS cabinet design is ideal for floor monitor use. Also features pole socket* for pole mounting.
ARRAY FRAMES & U-BRACKETS
Array frames
U-brackets
Heavy duty U-brackets
HAF3-2115
UB2115
VUB2115
U-Brackets for horizontal mounting
BGVC1 approved vertical U-Bracket
HAF2-2115
VAF2-2115
Download the Installation Series Rigging Guide from Yamaha's website for rigging details:
http://www.yamahaproaudio.com/global/en/downloads/systemdesign/speaker_processor_settings/
19
Installation Series
Model
IF2115/64
Nominal coverage @-6dB (Horizontal x Vertical) 60°x 40°(rotatable)
Nominal impedance
Passive *1
600W
PGM
1200W
MAX
2400W
Continuous SPL
(calculated)
LF:1400W, HF:220W
MAX
LF:2800W, HF:440W
Peak SPL
(calculated)
98dB SPL
HF
110dB SPL
Components
106dB SPL
108dB SPL
128dB SPL
126dB SPL
128dB SPL
134dB SPL
132dB SPL
134dB SPL
125dB SPL
LF
125dB SPL
HF
130dB SPL
Passive
Bi-amp
108dB SPL
97dB SPL
LF
Passive
Bi-amp
60-100°x 60°(rotatable)
LF:700W, HF:110W
PGM
Passive
Bi-amp
IF2115/AS
90°x 90°
LF:8Ω, HF:8Ω
NOISE
Sensitivity
(1W, 1m)
IF2115/99
8Ω
Passive
Bi-amp MF/HF
Power rating
IF2115/95
131dB SPL
LF
132dB SPL
HF
136dB SPL
LF
HF
Rotatable constant directivity horn, 1.4" exit, 3" voice coil compression driver
45Hz-20kHz
900Hz
Connectors
1x NL4 and barrier strip, wired in parallel
2 x NL4 and barrier strip, wired
in parallel
Shape
Multi-angle wedge
448 x 770 x 534mm (17.6" x 30.3" x 21.0")
Weight
39.0kg (86.0lbs)
448 x 770 x 374mm (17.6" x 30.3"
x 14.7")
35.0kg (77lbs)
Flying hardware
15 x M10, 4 x M8
16 x M10
UB2115, HAF2-2115, HAF3-2115, VAF2-2115
UB2115
3rd Party
Accessories
120.0 series
-
Omnimount (US)
1.2kHz
1.1kHz
Multimount (US, Allen products) 120 series
-
Powerdrive (UK)
-
120 series
Model
IF2115M/64
Nominal coverage @-6dB (Horizontal x Vertical) 60°x 40°(rotatable)
Nominal impedance
Passive *1
350W
PGM
700W
MAX
1400W
LF:800W, HF:120W
MAX
LF:1600W, HF:240W
Passive
Bi-amp
LF
Passive
Bi-amp
Components
110dB SPL
126dB SPL
132dB SPL
132dB SPL
124dB SPL
128dB SPL
128dB SPL
LF
130dB SPL
HF
134dB SPL
LF
15" woofer, 3 " voice coil
HF
Rotatable constant directivity horn, 1.4" exit, 1.7" voice coil compression driver
45Hz-20kHz
1.1kHz
Connectors
1x NL4 and barrier strip, wired in parallel
Shape
448 x 770 x 534mm (17.6" x 30.3" x 21.0")
Weight
34.0kg (75.0lbs)
Flying hardware
15 x M10, 4 x M8
UB2115, HAF2-2115, HAF3-2115, VAF2-2115
3rd Party
Accessories
120.0 series
Omnimount (US)
126dB SPL
98dB SPL
122dB SPL
HF
Peak SPL
(calculated)
108dB SPL
97dB SPL
LF
HF
Continuous SPL
(calculated)
LF:400W, HF:60W
PGM
Passive
Bi-amp
108dB SPL
LF:8Ω, HF:8Ω
NOISE
Sensitivity
(1W, 1m)
IF2115M/99
90° x 90°
8Ω
Passive
Bi-amp MF/HF
Power rating
IF2115M/95
1kHz
1.1kHz
Multimount (US, Allen products) 120 series
Powerdrive (UK)
120 series
*1 2hours, IEC *2 AES *3 Bi-amp mode, Yamaha recommended DSP configuration, full-space *4 At this frequency, the transducers produce equal sound pressure levels.
41.3(1.63)
687(27.06)
303(11.91)
448(17.64)
6-M10
41.3(1.63)
138(5.45)
41.3(1.63)
203(8.00)
222(8.73)
374(14.72)
15˚
385(15.16)
364(14.33)
770(30.31)
174.6(6.88)
IF2115/AS
133(5.25)
203(8.00)
M10
385(15.16)
6-M10
41.3(1.63)
9-M10
40˚
303(11.91)
448(17.64)
687(27.06)
8-M10
364(14.34)
41.3(1.63)
184(7.23)
41.3(1.63)
15˚
305(12.00)
382(15.03)
534(21.01)
IF2115(M)/64/95/99
770(30.31)
Installation Series
20
DIMENSIONS
Center of balance
unit : mm (inch)
141(5.57)
29(1.13)
88.9(3.50)
4-M8
195(7.70)
M10
Installation Series
21
Speaker System
IS1218
IS1118
IS1218 Rear Panel
IS1118 Rear Panel
IS1215
IS1112
IS1112 Rear Panel
IS1215 Rear Panel
IS1218 & IS1215 & IS1118
IS1112
High-power subwoofer systems with
single or dual woofers.
Uncompromising IS series performance ideally
matched to smaller full-range speakers.
• Sound and phase characteristics matched with all other
• The perfect way to achieve naturally extended low-end
• Dual 15” woofers in the IS1215.
• Single/dual 18” woofers in the IS1118/IS1218
• Dual woofers can be switched for discrete drive (IS1215 and
• Significantly smaller than competing 12” subwoofers, while
• Rugged 19-mm thick, 13-ply Finland birch enclosure can be
• Large 4” voice coil for superior reliability, power handling, and
• Twelve 10mm-screw suspension points (M10) provided for
• Direct connection to full-range units without the need for
• Durable black or white finish.
• Optional matching array frame available (for IS1118 and IS1218
• Flexible installation and handling: 12 x M10 rigging points, two
Installation Series models for optimum performance in any
combination.
IS1218).
painted to match any interior.
flexible rigging.
only).
response in systems that use smaller IS series full-range
models for primary delivery.
delivering outstanding sonic performance and reliability.
• 2800 Watt peak input capacity with high 127 dB sound
pressure level output.
response.
special speaker cables.
handles, and pole socket*.
*Please refer to the precautions on the Owner's Manual when using
the pole socket.
• Vibration damping rubber feet supplied.
• Durable black or white exterior finish.
22
Installation Series
Model
IS1218
Nominal impedance
Parallel
Discrete
Power rating *1
Parallel
Discrete
IS1215
IS1118
4Ω
8Ω x 2
8Ω
NOISE
1400W
-
PGM
MAX
2800W
5600W
-
NOISE
700W x 2
700W
PGM
1400W x 2
1400W
MAX
97dB SPL
2800W
-
IS1112
Sensitivity (1W, 1m)
Parallel
2800W x 2
99dB SPL
Discrete
102dB SPL
100dB SPL
96dB SPL
93dB SPL
Continuous SPL (calculated)
Peak SPL (calculated)
Parallel/Discrete
Parallel/Discrete
130dB SPL
136dB SPL
128dB SPL
134dB SPL
124dB SPL
130dB SPL
121dB SPL
127dB SPL
2 x 18" woofer, 4" voice coil
33Hz-3kHz
2 x 15" woofer, 4" voice coil
40Hz-2.5kHz
33Hz-3kHz
45Hz-2kHz
Rectangular
610 x 1006 x 709mm
448 x 883 x 610mm
(24.0" x 39.6" x 27.9")
(17.6" x 34.8" x 24.0")
610 x 591 x 709mm
(24.0" x 23.3" x 27.9")
378 x 394 x 454mm
(14.9" x 15.5" x 17.9")
Weight
76.0kg (167.6lbs)
63.0kg (138.9lbs)
44.0kg (97.0lbs)
24.0kg (53.0lbs)
Flying hardware
12 x M10
HAF3-S18
-
HAF3-S18
-
Components
Connectors
Shape
*1 AES
*2 Yamaha recommended DSP configuration, full-space
DIMENSIONS
41.3(1.63)
346(13.62)
448(17.63)
6-M10
800(31.50)
41.3(1.63)
41.3(1.63)
296(11.7)
378(14.9)
41(1.6)
197(7.8)
399(15.7)
20(0.8)
RUBBER FOOT POSITION
20(0.8)
20(0.8)
394(15.5)
12-M10
508(20.00)
6-M10
41.3(1.63)
527(20.75)
610(24.00)
41(1.6)
204(8.0)
269(10.6)
289(11.4)
454(17.8)
IS1115
394(15.50)
529(20.81)
700(27.55)
6-M10
591(23.25)
IS1118
41(1.6)
41.3(1.63)
41.3(1.63)
924(36.38)
1006(39.63)
6-M10
883(34.75)
527(20.75)
610(24.00)
6-M10
41.3(1.63)
6-M10
356(14.01)
441(17.38)
608(23.95)
IS1215
394(15.50)
529(20.81)
700(27.55)
IS1218
41.3(1.63)
41.3(1.63)
unit : mm (inch)
Center of balance
Concert Club V C Series
23
Loudspeaker
C115VA
C112VA
Club V C models fit to fly and ideal for installations
• Solid, reliable connection hardware for suspended installation
• Painstaking selection of parts and components, optimized wooden enclosures, and a thorough re-evaluation of speaker capacity take
sonic performance to a new level.
• Protection circuit prevents excessive tweeter input due to acoustic feedback or other causes.
• Durable enclosure with foamed steel grilles, and large metal handles for improved handling
• The YSProcessing (Yamaha Speaker Processing) switch provided on the EMX series powered mixers and P series amplifiers enhances
matching for even greater sonic impact.
BRACKETS
BWS251
Wall-Brackets
BCS251
Ceiling-Brackets
BBS251
Baton-Brackets
24
Concert Club V C Series
Model
C115VA
Type
2-way bass-reflex
Frequency range (-10dB)
55Hz-16kHz
Nominal coverage (Horizontal x Vertical)
90° x 40°
C112VA
60Hz-16kHz
8Ω
Nominal impedance
Power rating
NOISE
250W
175W
PGM
500W
350W
1000W
700W
MAX
Sensitivity (1W,1m)
Component
99dB SPL
97dB SPL
LF
15" cone
12" cone
HF
CD horn + 2" voice coil compression driver
Connectors
Barrier strip
485 x 707 x 373mm (19.1" x 27.8" x 14.7")
416 x 620 x 329mm (16.4" x 24.4" x 13.0")
Weight
29.9kg (65.9lbs)
21.8kg (48.1lbs)
Accessories
3/8" Eyebolt x4
3/8" Eyebolt x4, W5/16" screw x4 for 251 series brackets
DIMENSIONS
unit : mm (inch)
C115VA
C112VA
10
10
5
620(24.,4)
707(27.8)
75
75
5
485(19.1)
373(14.7)
416(16.4)
329(13.0)
25
Concert Club V Series
Subwoofer
SW218V
CW218V
SW118V
CW118V
SW115V
CW115V
Rugged subs extend low response for
solid sonic impact.
Subwoofers that can add serious
authority to your low end.
• Painstaking selection of parts and components, optimized wooden enclosures, and a thorough reevaluation of speaker capacity take
sonic performance to a new level.
• Dual phone jacks and dual Speakon connectors for input and parallel connection.
• Advanced bass-reflex design for smooth bass response
• Durable enclosure with arced steel grille, and large metal handles for improved portability.
• Ideally matched to Yamaha powered mixers and power amplifiers.
26
Concert Club V Series
Model
SW218V / CW218V
Type
Bass-reflex
Frequency range (-10dB)
Nominal impedance
Power rating
SW118V / CW118V
SW115V / CW115V
30Hz-2kHz
30Hz-2kHz
35Hz-2kHz
4Ω
8Ω
NOISE
600W
300W
250W
PGM
1200W
600W
500W
2400W
1200W
1000W
Sensitivity (1W,1m)
MAX
98dB SPL
96dB SPL
95dB SPL
Component
18" cone x 2
18" cone
15" cone
Connectors
1/4" phone jack x 2,
SPEAKON Neutrik NL4MP x 2
1221 x 578 x 659mm (48.1" x 22.8" x 25.9")
610 x 728 x 641mm (24.0" x 28.7" x 25.2")
506 x 611 x 532mm (19.9" x 24.1" x 20.9")
Weight
SW218V: 65.4kg (144.2lbs)
SW118V: 39.0kg (86.0lbs)
SW115V: 28.2kg (62.2lbs)
CW218V: 64.7kg (142.6lbs)
CW118V: 37.2kg (82.0lbs)
CW115V: 28.0kg (61.7lbs)
DIMENSIONS
unit : mm (inch)
SW218V/CW218V
SW118V/CW118V
SW115V/CW115V
35(1.4)
611(24.1)
728(28.7)
578(22.8)
35(1.4)
1221(48.1)
659(25.9)
610(24.0)
641(25.2)
506(19.9)
532(20.9)
DXR Series
27
Powered Loudspeaker
DXR15
DXR12
DXR10
DXR8
High-definition sound and ultimate power in compact, versatile design
• Output levels up to 133dB SPL with 1100W of power
• Precise 48-bit DSP processing with Yamaha’s proprietry FIR-X tuning™ delivers high-definition sound
• D-CONTOUR intelligent multi-band dynamic processing delivers powerful, consistently high-quality sound at all output levels in FOH or
monitor applications
• Extensive DSP protection functions for maximum output
• Custom-designed transducers and top-quality components add up to unequalled performance
• Extremely accurate 90 x 60 constant directivity horn
• Intelligent onboard 3-channel mixer with flexible IN/OUT connectivity for versatile system integration
• Flexible HPF control allows optimum matching with DSR and DXS subwoofers
• Universal switching-mode power supply for world-wide use
• Durable, compact ABS enclosures
• Symmetrical enclosure design for mirror-mode floor monitoring (DXR12 and DXR15)
• Dual-angle pole mount plus rigging points for standard eye-bolts and optional U-brackets
Frequency Response of DXR12
D-CONTOUR
(Dynamic-CONTOUR)
20
D-CONTOUR FOH/MAIN
D-CONTOUR OFF
D-CONTOUR MONITOR
D-CONTOUR OFF
10
RESPONSE (dB)
10
RESPONSE (dB)
An intelligent multi-band compressor
that provides powerful and consistent
sound throughout all output levels.
Frequency Response of DXR12 in
Floor Monitor Position
20
0
-10
-20
-30
20
0
-10
-20
50
100
500 1k
FREQUENCY (Hz)
5k
10k
20k
-30
20
50
100
500 1k
FREQUENCY (Hz)
5k
10k
20k
28
DXR Series
Model
DXR15
Speaker Type
2-way, Bi-amp powered speaker, Bass-reflex type
Frequency Range
-10dB
Nominal coverage (Horizontal x Vertical)
DXR12
49Hz - 20kHz
DXR10
DXR8
52Hz - 20kHz
56Hz - 20kHz
57Hz - 20kHz
90° x 60°
Maximum SPL (1m, on axis)
133dB SPL
132dB SPL
131dB SPL
129dB SPL
Components
LF
15" cone, 2.5" voice coil
10" cone, 2" voice coil
8" cone, 2" voice coil
HF
1.4" compression driver (1" throat)
2.3kHz
2.4kHz
Crossover Type
FIR-X tuning™
Crossover Frequency
2.1kHz
Output Power
(Linear phase FIR filter)
Dynamic
1100W (LF: 950W, HF: 150W)
Continuous
700W (LF: 600W, HF: 100W)
Connectors
INPUT: XLR-3-31 x1 , INPUT2: Phone x2, INPUT3: RCA PIN x 2, THRU: XLR3-32 x 1 (Parallel with INPUT 1), LINK OUT: XLR x 1
Processors
D-CONTOUR: FOH/MAIN, MONITOR, OFF
Power Requirements
100V - 240V, 50Hz/60Hz
Power Consumption
110W
90W
Flying and Mounting Hardware
Top x2, Rear x1 (Fits for M10 x 18mm eyebolts)
Top x2, Rear x1 (Fits for M8 x 15mm eyebolts)
Pole socket
35mm with 2-way features (0 or 7 degrees)
445 x 700 x 380mm
(17.5" x 27.5" x 15.0")
362 x 601 x 350 mm
(14.2" x 23.6" x 13.7")
305 x 502 x 310 mm
(12.0" x 19.7" x 12.2")
280 x 458 x 280 mm
(11.0" x 18.0" x 11.0")
Weight
22.5kg (49.6lbs)
19.3kg (42.5lbs)
14.6kg (32.2lbs)
13.5kg (29.8lbs)
Accessories
UB-DXR15 (U-barcket)
UB-DXR12(U-barcket)
UB-DXR10 (U-barcket)
UB-DXR8 (U-barcket)
Material
ABS (Matte Finish, Black)
DXR10
DXR8
INPUT SPECIFICATIONS
Model
Input
DXR15
DXR12
INPUT1: XLR3-31 x1, INPUT2: Phone x2, INPUT3: RCA PIN x2
Output
THRU: XLR3-32 x1 (Parallel with INPUT1), LINK OUT: XLR3-32 x1
INPUT1
LINE: 12kΩ, MIC: 8kΩ
INPUT2, 3
L, R: 40kΩ, MONO: 20kΩ
Input Sensitivity
INPUT1
LINE: +1dBu, MIC: -32dBu
(LEVEL: Maximum)
INPUT2, 3
-13dBu
Input Sensitivity
INPUT1
LINE: +11dBu, MIC: -22dBu
(LEVEL: Center)
INPUT2, 3
-3dBu
Maximum Input
INPUT1
LINE: +24dBu, MIC: +20dBu
Level
INPUT2, 3
+16dBu
Connectors
Input Impedance
REAR PANELS & BLOCK DIAGRAMS
DIMENSIONS
DXR15
UB-DXR15 U-barcket
unit : mm (inch)
DXR12
445(17.5)
380(15.0)
310(12.0)
280(11.0)
°
458(18.0)
50
UB-DXR8 U-barcket
280(11.0)
355(13.9)
305(12.0)
502(19.7)
UB-DXR10 U-barcket
601(23.6)
°
DXR8
DXR10
°
456(18.0)
50
UB-DXR12 U-barcket
350(13.7)
50
700(27.5)
362(14.2)
402(15.8)
OPTIONS
DXS Series
29
Powered Subwoofer
DXS15
DXS12
Compact, high-output powered subwoofers that match perfectly with DSR
and DXR full-range powered loudspeakers
• Optimized band-pass design produces high SPL with drastically reduced distortion
• High-efficiency 950W Class-D power amplifiers
• Yamaha's formidable DSP technologies ensure ideal filter tuning for solid, accurate low-frequency response
• Powerful D-XSUB DSP processing provides a choice of NORMAL, BOOST, or XTENDED LF settings to match a variety of applications
• XTENDED LF extends low frequency down to 42Hz
• Extensive DSP protection functions for maximum output
• Custom-designed high-power woofer with superior damping characteristics
• INPUT and THRU connectors for efficient, flexible system setup
• Universal switching-mode power supply for world-wide use
• Durable, expertly crafted painted wood enclosures
Model
DXS15
Speaker Type
Powered subwoofer, Band-pass type
Frequency Range
-10dB
DXS12
45Hz - 160Hz
47Hz - 160Hz
Maximum SPL (1m; on axis)
132dB SPL
131dB SPL
Components
LF
Output Power
Dynamic
950W
Continuous
600W
Connectors
INPUT: XLR-3-31 x2 , THRU: XLR3-32 x 2(Parallel with INPUT)
Processors
D-XSUB: BOOSTXTENDED-LF OFF
Power Requirements
100V - 240V, 50Hz/60Hz
Power Consumption
120W
Pole socket
35mm (Top x1)
478 x 618 x 624mm (18.8" x 24.3" x 24.5")
397 x 563 x 594mm(15.6" x 22.2" x 23.4")
38.0kg (83.8lbs)
33.0kg (72.8lbs)
Weight
Material
Wood (Paint, Black)
REAR PANELS & BLOCK DIAGRAMS
DIMENSIONS
DXS15
INPUT
unit : mm (inch)
DXS12
DSP
SIGNAL
INPUT MIX
HA
L (LINE)
THRU
LEVEL
AD
PORALITY
LPF
D-XSUB
120Hz
BOOST
100Hz
OFF
80Hz
XTENDED LF
SUB WOOFER
●LIMIT
EQ
DELAY
LIMITER
●PROTECTION
MUTE
DA
AMP
HA
R (LINE)
THRU
TEMP.
DC-FAULT
OUTPUT
CURRENT
OUTPUT
VOLTAGE
INTEGRAL
OUTPUT
POWER
ON/OFF
MUTE
PROTECTION LOGIC
INPUT
478(18.8)
DSP
SIGNAL
INPUT MIX
HA
L (LINE)
THRU
LEVEL
AD
PORALITY
LPF
D-XSUB
120Hz
BOOST
100Hz
OFF
80Hz
XTENDED LF
624(24.5)
SUB WOOFER
●LIMIT
EQ
DELAY
LIMITER
397(15.6)
594(23.4)
●PROTECTION
MUTE
DA
AMP
TEMP.
DC-FAULT
OUTPUT
CURRENT
OUTPUT
VOLTAGE
INTEGRAL
OUTPUT
POWER
ON/OFF
MUTE
PROTECTION LOGIC
563(22.2)
THRU
618(24.3)
HA
R (LINE)
MS101III
30
Powered Monitor Speaker
MS101III
MS101III Rear Panel
A compact, convenient approach to high quality monitoring.
• 10 cm full-range speaker with 10 Watts power amplifier
• 3 inputs: mic x 1 (phone), line x 2 (phone & RCA pin).
• Tone control (high/low)
• Line output for expanding your speaker system
• Options for convenient stand or wall mounting (sold separately)
OPTIONS
BWS20-120/190
Ceiling Bracket
Wall Bracket
BMS-10A
Free-Angle Clamp
Mic Stand Adaptor
DIMENSIONS
unit : mm
Bass-reflex powered speaker
75Hz to 18kHz
97dB SPL (1m, 10W)
30W
147 x 214 x 192mm (5.8" x 8.4" x 7.6")
2.5kg (5.5lbs)
214(8.4)
Type
Frequency response
Sensitivity
Power consumption
Weight
BAS10
199(7.8)
BCS20-150/210
SPEAKER SECTION
10cm cone x 1
4Ω
147(5.8)
AMPLIFIER SECTION
Output terminal
Control
185(7.3)
192(7.6)
71(2.8)
10W (@1kHz, THD=0.5%, RL=4Ω)
MIC input: Phone jack (-45dB, 2kΩ)
LINE input1: RCA pin jack(-10dB, 10kΩ)
LINE input2: Phone jack(-10dB, 10kΩ)
LINE OUT: Phonejack(-10dB, 600Ω)
VOLUME, Tone control (Low/High)
2-M5
60(2.4)
Output power
Input terminal
54(2.1)
Components
Nominal impedance
WORKproCA Neo-Ai series
31
NEO-Ai series
Cost effective self-powered loudspeakers.
Rear view
NEO 60 Ai 
NEO Ai loudspeakers are
available in black and white.
NEO 50 Ai 
Two self powered models complete the NEO i series for maximum
convenience and flexibility.
Features
Both models feature a two channel class D amplifier, with bass and
treble tone controls, RCA, 3.5mm mini-jack inputs and a powered output
for a passive speaker (included).
Each NEO Ai series model is supplied as a complete pair: a self-powered loudspeaker with matching passive loudspeaker, mains cable and
3m speaker link cable.
- Self powered loudspeakers designed for fixed installations.
- Class D amplifier for minimal weight and heat.
- Built-in anticlip circuit.
- Available in two colours (black and white) with an elegant
design.
- Wall-mount bracket with fast mounting system.
- Optional metal bracket available.
- Each unit comes with another loudspeaker (passive).
Technical Data
Type
Elements
Power output
Frequency response
Input Sensitivity
Headroom
Max SPL
Main supply
Dimensions
Weight
NEO 50 Ai
NEO 60 Ai
Self-powered 2 way loudspeaker.
Self-powered 2 way loudspeaker.
2 x 25 W RMS.
2 x 30 W RMS.
60 Hz - 20 kHz.
55 Hz - 20 kHz.
0.7 V / - 0.87 dBu.
0.7 V / - 0.87 dBu.
14 dB.
14 dB.
102 dB.
103 dB.
AC 115/230 V, 50/60 Hz.
AC 115/230 V, 50/60 Hz.
171 x 244 x 166 mm (WxHxD).
200 x 290 x 175 mm (WxHxD).
2.7 kg.
3.3 kg.
OPTIONAL
BRACKET
An optional metal wall-mount bracket (MB 5) is
also available.
STAGEPAS Series
32
Portable PA Systems
STAGEPAS 600i
STAGEPAS 400i
Portable All-in-one Sound Solutions with iPod/iPhone connectivity, Digital
Reverbs, an Onboard Feedback Suppressor and Versatile EQ
• Includes two lightweight speakers and a detachable mixer, along with one pair of speaker cables and a power cord.
• Plenty of power for a wide range of situations: 680 Watts (340W + 340W) from the 600i, and 400 Watts (200W + 200W) from the 400i.
• Versatile connectivity via 10 mixer channels in the STAGEPAS 600i, or 8 mixer channels in the STAGEPAS 400i.
• Digital connection for iPod/iPhone provides high-quality playback with simultaneous charging.
• One-knob access to four top-quality digital SPX reverbs, with individual reverb level control for each mono channel.
• 1-Knob Master EQ™ instantly optimizes EQ for a variety of program material, from speech through musical performance to bass
enhancement.
• Built-in intelligent feedback suppressor makes it easy to achieve professional quality sound by removing uncomfortable feedback.
• Hi-Z switches allow direct connection of acoustic-electric guitars or basses without the need for extra direct boxes.
• Switchable phantom power for high-performance condenser microphones.
• Monitor outputs make it easy to add optional powered speakers such as Yamaha's DXR lineup
• Subwoofer output connects to optional Yamaha DXS series or other powered subwoofers for extended low range.
• Stand-mountable speakers designed for wide, uniform coverage.
OPTION
BMS10A
FC5
The optional BMS-10A Mic
Stand Adaptor makes it easy to mount the
mixer on a microphone stand.
Optional FC5 footswitch allows convenient
foot-controlled reverb on/off switching.
Mic Stand Adaptor
Foot Switch
33
STAGEPAS 600i, STAGEPAS 400i
STAGEPAS 600i
System
System Type
Maximum SPL Measured peak IEC noise @ 1m
Frequency Range (-10 dB)
Power consumption
Power requirements
Weight
Powered Mixer
Mixer
Mixing channels
Analog inputs
Digital inputs
Channel EQ
129dB SPL / speaker
55Hz - 20kHz
35W (Idle), 100W (1/8 Power)
100V - 240V 50Hz/60Hz
Speaker 335 x 545 x 319mm (13.2" x 21.5" x 12.6"),
Mixer 348 x 197 x 135mm (13.7" x 7.8" x 5.3")
25.4kg / 56lbs (2 x Speaker 10.8kg + Mixer 3.8kg)
Cover panel, Power cord (2m), 2xSpeaker cables (6m), 12xNon-skid pads
Yamaha BMS10A (mic stand adaptor) for mixer mount, FC5 (foot switch) for reverb ON/OFF
OUTPUT SPECIFICATIONS
ANALOG INPUT SPECIFICATIONS
STAGEPAS 600i
Input
MIC/LINE Impedance
MIC
LINE
MIC
LINE
MIC
CH IN 3-4
3kΩ
3kΩ
10 kΩ
Input level
Connector
Max.
Sensitivity Nominal before
clip
-56 dBu -35 dBu -10 dBu
150 Ω
XLR-3-31
Mics
-30 dBu
-9 dBu
+16 dBu
-56 dBu -35 dBu -10 dBu
150 Ω
XLR
Mics
-30 dBu
-9 dBu
+16 dBu
XLR
-50 dBu -29 dBu
-4 dBu
150 Ω
Combo
Phone
Lines
-24
dBu
-3
dBu
+22
dBu
(Hi-Z 10kΩ)
Source
Impedance
LINE
(Hi-Z 1MΩ)
CH IN 5/6
LINE
10 kΩ
150 Ω
Lines
-24 dBu
-3 dBu
+22 dBu Phone**
CH IN 7/8
LINE
10 kΩ
150 Ω
Lines
-24 dBu
-3 dBu
+22 dBu Phone**, RCA Pin
10 kΩ
150 Ω
Lines
-24 dBu
CH IN 9/10
Speaker 289 x 472 x 275mm (11.4" x 18.6" x 10.8"),
Mixer 308 x 180 x 116mm (12.1" x 7.1" x 4.6")
17.8kg / 39.2lbs (2 x Speaker 7.5kg + Mixer 2.8kg)
Two-way bass-relfex speakers
LF: 10” (25cm) cone, HF: 1.4” (3.56cm) voice coil compression driver
LF: 8” (20cm) cone, HF: 1” (2.54cm) voice coil compression driver
90° x 60°
50°
1 x Top
34.8-35.2mm pole socket with StageLok™
STAGEPAS 600i
CH IN 1-2
125dB SPL / speaker
55Hz - 20kHz
30W (Idle), 70W (1/8 Power)
10
8
4 mono mic/line + 6 mono / 3 stereo line
4 mono mic/line + 4 mono / 2 stereo line
USB Audio IN: iPod/iPhone exclusive
3-band (HIGH Shelving: 8kHz, MID peaking: 2.5kHz, LOW Shelving:
2-band (HIGH Shelving: 8kHz, LOW Shelving: 100Hz)
100Hz)
Hi-Z switch: CH4, ST/MONO switch: CH5/6-9/10
Hi-Z switch: CH4, ST/MONO switch: CH5/6-7/8
SPX digital reverb (4 program, parameter control)
Feedback suppressor, 1-Knob Master EQ™
+30V (CH1, 2)
SPEAKERS OUT (L, R), MONITOR OUT (L/MONO, R), SUBWOOFER OUT (MONO) with auto HPF
Reverb foot switch
680W (340W + 340W)
400W (200W + 200W)
560W (280W + 280W)
360W (180W + 180W)
Channel functions
Digital effects
Output processing
Phantom power
Outputs
Control and others
Built-in Amplifiers Power Rating (Dynamic)
Power Rating (Continuous)
Speaker
Type
Transducers
Coverage Angle (Horizontal x Vertical)
Floor Monitor Angle
Handle
Pole socket
Accessories
Included Accessories
Optional Accessories
Input
terminals
STAGEPAS 400i
Powered mixer with 2 passive speakers
LINE
Output Level
Output
Load
Typ at
Output terminals Impedance
Max.
Impedance Nominal
before clip THD+N
10%
SPEAKERS
4Ω
280 W
<0.1 Ω
OUT [L,R]
Speakers
MONITOR
OUT [L,R]
SUBWOOFER
OUT
-3 dBu
+22 dBu Phone**, Stereo Mini
STAGEPAS 400i
MIC/LINE
Input
Impedance
CH IN 3-4
MIC
LINE
MIC
LINE
MIC
LINE
(Hi-Z 1MΩ)
CH IN 5/6
LINE
10 kΩ
CH IN 7/8
LINE
10 kΩ
CH IN 1-2
3kΩ
3kΩ
10 kΩ
Source
Impedance
150 Ω
Mics
150 Ω
Mics
150 Ω
Lines
(Hi-Z 10kΩ)
150 Ω
Lines
150 Ω
Lines
150 Ω
10 kΩ
Lines
340 W
Connector
Phone**
+4 dBu
+20
dBu
-
-
Phone**
-3 dBu
+17
dBu
-
-
Phone**
STAGEPAS 400i
Output
Load
Output terminals Impedance
Impedance
Input level
Sensitivity Nominal
Connector
Max.
before clip
-10 dBu
XLR-3-31
+16 dBu
-10 dBu
XLR
+16 dBu
XLR
-4 dBu
Combo
Phone
+22 dBu
-56 dBu
-30 dBu
-56 dBu
-30 dBu
-50 dBu
-35 dBu
-9 dBu
-35 dBu
-9 dBu
-29 dBu
-24 dBu
-3 dBu
-24 dBu
-3 dBu
+22 dBu Phone**, RCA Pin
-24 dBu
-3 dBu
+22 dBu Phone**, Stereo Mini
Output Level
Typ at
THD+N
10%
Max.
Nominal before
clip
Dynamic
Connector
<0.1 Ω
4Ω
Speakers
-
-
MONITOR
OUT [L,R]
600 Ω
10 kΩ
Lines
+4 dBu
+20
dBu
-
-
Phone**
SUBWOOFER
OUT
150 Ω
10 kΩ
Lines
-3 dBu
+17
dBu
-
-
Phone**
SPEAKERS
OUT [L,R]
Input
terminals
600 Ω
10 kΩ
Lines
Dynamic
180 W
200 W
Phone**
DIGITAL INPUT SPECIFICATIONS
Terminal
USB IN
Format
iPod, iPhone exclusive
Connector
USB A type
DIMENSIONS
STAGEPAS 600i
MIXER
unit : mm
STAGEPAS 400i
SPEAKER
MIXER
SPEAKER
XMV Series
34
Multi-channel Power Amplifiers, 4 channel models
XMV4280
XMV4140
2U
XMV4280 Rear Panel
XMV4280-D
XMV4140-D
2U
XMV4280-D Rear Panel
Multi-channel power amplifiers with features designed specifically to benefit
installation sound systems.
• Four-channel power amp that can operate in both high-impedance (70V/100V line) or low-impedance (4Ω/8Ω) modes simultaneously.
• 70V or 100V mode can be assigned to every pair of channels without affecting the number of available output channels.
• The newly developed Double Power Mode function effectively doubles the output power of selected channels.
• Equipped with either YDIF* digital audio format or Audinate’s digital audio network Dante for simple and fast system configuration.
• Easy setting such as the mute on/off or attenuator changes with MTX Editor when used in system with MTX Series.
• An innovative, new, patent pending circuit improves the already highly efficient Class D circuit topology, bringing the efficiency level of
the amplifier's output stage up to over 90%.
• Features a Power Factor Correction equipped switching power supply, ensuring harmonic control and decreasing the amount of current
draw while maintaining the same output power.
• Powerful, intelligent protection features for more reliable operation.
*YDIF: the newly developed digital transmission format; a unique proprietary Yamaha technology that delivers 16ch audio and word clock transmission via standard CAT5 Ethernet
cable.
35
XMV Series
Model
Output Power
1kHz, THD+N = 1%
XMV4280
XMV4140
XMV4280-D
XMV4140-D
4Ω
280W x 4
140W x 4
280W x 4
140W x 4
8Ω
280W x 4
140W x 4
280W x 4
140W x 4
4Ω/ Double Power Mode
560W x 2
280W x 2
560W x 2
280W x 2
High impedance
Voltage Gain
560W x 2
280W x 2
560W x 2
280W x 2
100V line
250W x 4 / 40Ω
125W x 4 / 80Ω
250W x 4 / 40Ω
125W x 4 / 80Ω
70V line
250W x 4 / 20Ω
125W x 4 / 40Ω
250W x 4 / 20Ω
125W x 4 / 40Ω
RL= 8Ω
31.7dB
28.7dB
31.7dB
28.7dB
RL=8Ω / Double Power Mode
34.7dB
31.7dB
34.7dB
31.7dB
100V
38.2dB
38.2dB
38.2dB
38.2dB
35.2dB
35.2dB
35.2dB
35.2dB
150W
70V
RL= 8Ω
+4dBu
S/N Ratio
A-weighted
≥ 103dB
Power Consumption
1/8 power (4Ω pink noise)
250W
150W
250W
Idle (4Ω)
37W
37W
37W
37W
Standby
18.5W
18.5W
18.5W
18.5W
Input Sensitivity
THD+N
1kHz, half power
≤ 0.1%
Frequency Response
RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz
0dB, ±1.0dB
Crosstalk
1kHz, half power, 8Ω, Att. max, input 150Ω shunt
≤ -60dB
Maximum Input Level
+24dBu
20kΩ (balanced), 10kΩ (unbalanced)
Input Impedance
Connectors
Euroblock x 2 (6P, balanced)
Analog Input
RJ45 x 2 (YDIF IN / OUT)
Digital Input / Output
RJ45 x 2 (Dante PRIMARY / SECONDARY)
Barrier strip x 4 pairs
Speaker Output
RJ45 x 1
Network
Remote, Fault Output
Euroblock (3P) x 1
AC IN
AC Inlet x 1
Shared with Dante ports
Load Protection
POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Amplifier Protection
Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored
automatically), Low load impedance: Output mute (Restored automatically)
Power Supply Protection
Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) ,
Integrated power: Gain reduction (Restored automatically)
Cooling Fan
3-Speed fan x 2, front-to-back airflow
Power Requirements
100V, 120V, 230V-240V; 50Hz/60Hz
Dimensions (WxHxD)
480 x 88 x 422mm (18.9" x 3.5" x 16.6")
Weight
8.1kg (17.9lbs)
* Half power = 1/2 power output level
DIMENSIONS
421.6
unit : mm
88
480
XMV Series
36
Multi-channel Power Amplifiers, 8 channel models
XMV8280
XMV8140
2U
XMV8280 Rear Panel
XMV8280-D
XMV8140-D
2U
XMV8280-D Rear Panel
Multi-channel power amplifiers with features designed specifically to benefit
installation sound systems.
• Eight-channel power amp that can operate in both high-impedance (70V/100V line) or low-impedance (4Ω/8Ω) modes simultaneously.
• 70V or 100V mode can be assigned to every pair of channels without affecting the number of available output channels.
• The newly developed Double Power Mode function effectively doubles the output power of selected channels.
• Equipped with either YDIF* digital audio format or Audinate’s digital audio network Dante for simple and fast system configuration.
• Easy setting such as the mute on/off or attenuator changes with MTX Editor when used in system with MTX Series.
• An innovative, new, patent pending circuit improves the already highly efficient Class D circuit topology, bringing the efficiency level of
the amplifier's output stage up to over 90%.
• Features a Power Factor Correction equipped switching power supply, ensuring harmonic control and decreasing the amount of current
draw while maintaining the same output power.
• Powerful, intelligent protection features for more reliable operation.
*YDIF: the newly developed digital transmission format; a unique proprietary Yamaha technology that delivers 16ch audio and word clock transmission via standard CAT5 Ethernet
cable.
37
XMV Series
preliminary
Model
Output Power
1kHz, THD+N = 1%
XMV8280
XMV8140
XMV8280-D
XMV8140-D
4Ω
280W x 8
140W x 8
280W x 8
140W x 8
8Ω
280W x 8
140W x 8
280W x 8
140W x 8
560W x 4
280W x 4
560W x 4
280W x 4
High impedance
Voltage Gain
560W x 4
280W x 4
560W x 4
280W x 4
100V line
250W x 8 / 40Ω
125W x 8 / 80Ω
250W x 8 / 40Ω
125W x 8 / 80Ω
70V line
250W x 8 / 20Ω
125W x 8 / 40Ω
250W x 8 / 20Ω
125W x 8 / 40Ω
RL= 8Ω
31.7dB
28.7dB
31.7dB
28.7dB
RL=8Ω / Double Power Mode
34.7dB
31.7dB
34.7dB
31.7dB
100V
38.2dB
38.2dB
38.2dB
38.2dB
35.2dB
35.2dB
35.2dB
35.2dB
250W
70V
RL= 8Ω
+4dBu
S/N Ratio
A-weighted
≥ 100dB
Power Consumption
Input Sensitivity
450W
250W
450W
Idle (4Ω)
73W
73W
73W
73W
Standby
23W
23W
23W
23W
THD+N
1kHz, half power
≤ 0.2%
Frequency Response
RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz
0dB, ±1.0dB
Crosstalk
1kHz, half power, 8Ω, Att. max, input 150Ω shunt
≤ -60dB
Maximum Input Level
+24dBu
Input Impedance
Connectors
Euroblock x 4 (6P, balanced)
Analog Input
RJ45 x 2 (YDIF IN / OUT)
Digital Input / Output
RJ45 x 2 (Dante PRIMARY / SECONDARY)
Barrier strip x 8 pairs
Speaker Output
RJ45 x 1
Network
Remote, Fault Output
Euroblock (3P) x 1
AC IN
AC Inlet x 1
Shared with Dante ports
Load Protection
POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored
automatically), Low load impedance: Output mute (Restored automatically)
Power Supply Protection
Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) ,
Integrated power: Gain reduction (Restored automatically)
Cooling Fan
3-Speed fan x 2, front-to-back airflow
Power Requirements
100V, 120V, 230V-240V; 50Hz/60Hz
Dimensions (WxHxD)
480 x 88 x 422mm (18.9" x 3.5" x 16.6")
Weight
10.1kg
DIMENSIONS
421.6
421.6
unit : mm
88
88
480
480
XP Series
38
Power Amplifiers
XP7000
XP5000
XP3500
XP2500
XP1000
XP7000 Rear Panel
Five superb amplifiers optimized for installation use.
• Advanced circuit design and anti-vibration measures inherited from the PC-1N series deliver tight, solid lows, extraordinary midrange
presence, and precisely defined highs.
• Yamaha EEEngine technology achieves unmatched efficiency.
• +4dBu/26dB/32dB gain switch for flexible level matching.
• Lightweight, compact 2U design for easy handling and installation.
• Monitor and Remote terminals for remote monitoring and control.
• Precision 1-dB/step detented attenuators.
• XLR and Euroblock input terminals.
• Speakon and 5-way binding post output terminals.
• Frequency-switchable high-pass filter for subsonic noise reduction or subwoofer matching.
• Comprehensive protection circuits, indicators and variable-speed cooling.
• Ideal matches for the DME64N/24N Digital Mixing Engines and Installation Series speakers.
• XP7000 can be used to drive 70V lines (stereo), while XP3500 is compatible with 100V lines (bridged) for high-impedance multispeaker systems.
39
XP Series
XP7000
Model
Output Power
XP5000
XP3500
XP2500
390W x 2
1kHz, THD+N = 1% 4Ω
1100W x 2
750W x 2
120V/240V
590W x 2
8Ω
750W x 2
525W x 2
390W x 2
275W x 2
2200W
1500W
1180W
780W
8Ω bridge
1kHz, 20ms burst 2Ω
20Hz ~ 20kHz,
THD+N = 0.1%
RL= 8Ω
XP3500
XP2500
XP1000
165W x 2 (120V)
155W x 2 (240V)
135W x 2 (120V)
120W x 2 (240V)
330W (120V)
310W (240V)
1100W x 2
750W x 2
230V
590W x 2
390W x 2
155W x 2
750W x 2
525W x 2
390W x 2
275W x 2
125W x 2
2200W
1500W
1180W
780W
310W
1300W x 2
1000W x 2
650W x 2
250W x 2
1600W x 2
1300W x 2
925W x 2
650W x 2
250W x 2
3200W
950W x 2
2600W
700W x 2
2000W
450W x 2
1300W
300W x 2
3200W
950W x 2
2600W
700W x 2
1850W
435W x 2
1300W
295W x 2
500W
115W x 2
8Ω
700W x 2
500W x 2
350W x 2
250W x 2
690W x 2
500W x 2
350W x 2
250W x 2
100W x 2
1900W
1400W
900W
600W
1900W
1400W
870W
590W
230W
-
-
625W/16Ω
(Bridge)
-
500W
125W x 2 (120V)
110W x 2 (240V)
110W x 2 (120V)
100W x 2 (240V)
250W (120V)
220W (240V)
-
-
-
625W/16Ω
(Bridge)
-
-
625W x 2/8Ω
-
-
-
-
625W x 2/8Ω
-
-
-
-
31.2dBu
27.2dBu
70V Line
Input Sensitivity
XP5000
1600W x 2
8Ω bridge
RL= 8Ω
XP7000
4Ω bridge
4Ω
High Impedance 100V Line
Voltage Gain
XP1000
26dB/32dB
+4dBu position
35.7dBu
34.2dBu
32.7dBu
26dB/32dB
31.2dBu
27.2dBu
35.6dBu
34.2dBu
+4dBu
32.7dBu
+4dBu
26dB position
+13.7dBu
+12.2dBu
+10.7dBu
+9.2dBu
+5.2dBu
+13.6dBu
+12.2dBu
+10.7dBu
+9.2dBu
+5.2dBu
32dB position
+7.7dBu
+6.2dBu
+4.7dBu
+3.2dBu
-0.8dBu
+7.6dBu
+6.2dBu
+4.7dBu
+3.2dBu
-0.8dBu
S/N Ratio
20Hz~20kHz, DIN AUDIO
104dB
103dB
102dB
100dB
96dB
104dB
103dB
102dB
100dB
96dB
Power Consumption
650W
500W
450W
320W
170W
650W
500W
450W
320W
170W
Idle
35W
35W
30W
25W
20W
35W
35W
30W
25W
20W
Standby
5W
5W
5W
5W
5W
5W
5W
5W
5W
5W
20Hz~20kHz, 1/2 power, RL=4Ω Less than 0.1%
THD+N
Frequency Response
Crosstalk
RL=8Ω, Po=1W, 20Hz - 20kHz
+0dB, -1.0dB
1kHz, half power, 8Ω
Att. max, input 600Ω shunt
Less than -70dB
RL=8Ω, 1kHz
Damping Factor
More than 350
Maximum Input Level
More than 200
More than 350
More than 200
+22dBu
Input Impedance
Controls
Connectors
Front Panel
POWER switch x 1 (push on/push off), Attenuator x 2 (31position)
Rear panel
MODE switch x 1 (STEREO/BRIDGE/PARALLEL), HPF switch x 2 (20Hz/55Hz/OFF) (12dB/oct), GAIN switch x 1 (+4dBu/26dB/32dB)
Input
XLR-3-31 type x 2, Euroblock connector x 2 pairs (balanced)
Output
Neutrik ® SPEAKON ® NL4 x 2, 5-way binding post x 2 pairs
Monitor/Remote
D-SUB 15P x 1
POWER/STANDBY x 1 (Green/Orange), PROTECTION x 1 (Red), TEMP x 1 (Red) heatsink temp ≥ 85°C, SIGNAL x 2 (Green), CLIP/LIMIT x 2
(Red)
POWER switch on/off mute, DC-fault: Amplifier shuts down automatically (XP7000, XP5000 Operation not restored automatically)
Output Relay Off (XP3500, XP2500, XP1000 returns automatically), Clip limiting: THD ≥ 0.5%
Indicators
Load Protection
Thermal: Output Mute (heatsink temp ≥ 90°C) (Operation not restored automatically), VI limiter (RL ≤ 1Ω): Limit the output
Variable-speed fan x 2
Cooling Fan
Power Requirements
120V, 220V-240V; 50Hz/60Hz
Dimensions (WxHxD)
480 x 88 x 456mm (18-7/8" x 3-7/16" x 17-15/16")
Weight
XP7000, XP5000, XP2500: 14kg (30.9lbs), XP3500: 15kg (33.1lbs), XP1000: 12kg (26.5lbs)
Security cover x 1, Euroblock connector x 2 (3P), Owner's manual
DIMENSIONS
456
46
5.5
374.5
30
unit : mm
362
30 29
480
88
29 30
P-S Series
40
Power Amplifiers
P7000S
P5000S
P3500S
P2500S
P7000S Rear Panel
Reliable, professional-quality power amplification for a broad range of
applications.
• In 4Ω bridged mode the P7000S delivers 3200 Watts, the P5000S 2600 Watts, the P3500S 2000 Watts, and the P2500S 1300 Watts.
• Yamaha EEEngine technology significantly reduces power consumption and heat generation.
• Independent sweepable high-pass and low-pass filters on each channel so you can optimize output for subwoofer or full range
systems.
• Neutrik Speakon output jacks and 1/4-inch output jacks for each channel, in addition to 5-way binding post.
• Balanced XLR and 1/4-inch TRS jacks are provided for channel input.
• Variable-speed fans offer quiet, efficient cooling.
• Comprehensive protection includes power on/off muting, DC detection, thermal protection, current limiting, and a protective cover
for the attenuators.
• YS Processing (Yamaha Speaker Processing) achieves optimum matching with Yamaha Club Series loudspeaker systems.
41
P-S Series
Model
Output Power
P7000S
P5000S
P3500S
P2500S
1kHz, THD+N = 1% 4Ω
1100W x 2
750W x 2
590W x 2
390W x 2
8Ω
750W x 2
525W x 2
390W x 2
275W x 2
2200W
1500W
1180W
780W
1600W x 2
1300W x 2
1000W x 2
650W x 2
8Ω bridge
1kHz, 20ms burst 2Ω
4Ω bridge
20Hz ~ 20kHz,
THD+N = 0.1%
4Ω
8Ω
3200W
2600W
2000W
1300W
950W x 2
700W x 2
650W x 2 (230V)
700W x 2
500W x 2
450W x 2
350W x 2
310W x 2
250W x 2
900W
1400W
900W
620W
8Ω bridge
RL= 8Ω
Voltage Gain
32dB
Input Sensitivity
RL= 8Ω
+8dBu
+6dBu
+4dBu
+3dBu
S/N Ratio
20Hz~20kHz, DIN AUDIO
104dB
103dB
102dB
100dB
650W
500W
450W
320W
Idle
35W
35W
30W
25W
Power Consumption
THD+N
20Hz~20kHz, 1/2 power, RL=4Ω
Less than 0.1%
Frequency Response
Crosstalk
RL=8Ω, Po=1W, 20Hz - 50kHz
+0dB, -1.5dB
1kHz, half power, 8Ω
Att. max, input 600Ω shunt
Less than -70dB
Damping Factor
RL=8Ω, 1kHz
More than 350
Maximum Input Level
More than 200
+22dBu
Input Impedance
Rear panel
POWER switch x 1 (push on/push off), Attenuator x 2 (31position)
MODE switch x 1 (STEREO/BRIDGE/PARALLEL), FILTER switch x 2 (SUB WOOFER/LOW CUT/OFF), FREQUENCY control x 2
(25Hz ~ 150Hz) (12dB/oct), YS PROCESSING switch x 1 (ON/OFF)
Input
XLR-3-31 type x 2, 1/4" TRS phone x 2
Output
Load Protection
Neutrik® SPEAKON® NL4 x 2, 5-way binding post x 2 pairs, 1/4" phone x 2
POWER x 1 (Green), PROTECTION x 1 (Red), TEMP x 1 (Red) heatsink temp ≥ 85°C, YS PROCESSING x 1 (Yellow), SIGNAL x 2
(Green), CLIP x 2 (Red)
POWER switch on/off mute, DC-fault: Amplifier shuts down automatically, Clip limiting: THD ≥ 0.5%
Thermal: Output Mute (heatsink temp ≥ 90°C) (Operation not restored automatically), VI limiter (RL ≤ 1Ω): Output limit
Front Panel
Controls
Connectors
Indicators
Cooling Fan
Power Requirements
120V, 220V-240V; 50Hz/60Hz
Dimensions (WxHxD)
480 x 88 x 456mm (18-7/8" x 3-7/16" x 17-15/16")
12kg (26.5lbs)
Weight
Security cover×1, Owner's manual
DIMENSIONS
46
5.5
362
480
30 29
88
29 30
456
374.5
30
unit : mm
15kg (33.1lbs)
14kg (30.9lbs)
42
WORKproCA PCA-USB series
PCA-USB series
88 mm.
Cost efficient 100V amplifiers/mixers.
PCA 60 USB
483 mm.
305 mm.
PCA 190 USB
88 mm.
PCA 120 USB
483 mm.
335 mm.
PCA 240 USB
The PCA USB series has been designed to mix power amplification and MP3 audio playback.
The built-in MP3 system is very convenient because it allows music to be played in from an external
source supporting bith USB drives and SD cards with up to 32 GB of memory. The ID3 TAG visualization shows
information regarding songs or artists and allows easy navigation between folders. Volume can be controlled
independently and a REC function is available to record other audio sources on USB or SD devices.
PCA 60 USB features a 60 W power amplifier as well as 6 signal outputs (each with gain control, Master volume and High/Low tone controls). An extremely versatile device it can be used with low-impedance speakers (8
Ω) and 25/70/100 V Line voltage.
PCA 120 USB is a 120 W power amplifier featuring 2 different outputs: Music plus Voice and Voice only. For
optimum S/N ratio PCA 120 USB incorporates a built-in noise gate with adjustable level as well as a Master/
Slave mode to connect additional amplifiers which can be controlled from the Master.
Both models support AC 115-230 V supply and DC 24 V emergency supply.
Features
- Built-in MP3 player & recorder with SD and
USB independent inputs.
- Up to 32 GB memory.
- Preamp and TAPE outputs.
- TEL/EMER terminals with level control.
- Volume controls for inputs and Master.
- Low/High tone controls.
- Chime ON/OFF switch.
- 3 Line inputs (1 is switchable MIC/Line).
- 3 Mic inputs with selectable phantom supply.
- Mic1 input with priority.
- DC 24 V input supply available (useful for
mobile applications working with battery).
- Available output configurations: low
impendance (8 ohm) and constant
voltage (25V, 70V & 100V Line).
- Works on 115V and 220V supply
networks (selected by switch).
43
WORKproCA PC-USB series
PCA 60 USB
PCA 120 USB
PCA 190 USB
PCA 240 USB
Technical Data
PCA 60 USB
PCA 120 USB
PCA 190 USB
PCA 240 USB
Audio inputs
3 Mic, 1 Line, 2 Aux.
4 Mic, 2 Line, 1 Aux/CD.
4 Mic, 4 Line, 1 Aux/CD/Tuner/Tape.
4 Mic, 4 Line, 1 Aux/CD/Tuner/Tape.
Mic (impedance / sensitivity)
250 Ω / 1 mV bal.
250 Ω / 1 mV bal.
600 Ω / 2.7 mV bal.
600 Ω / 2.7 mV bal.
Line (impedance / sensitivity)
47 kΩ / 200 mV.
47 kΩ / 200 mV.
47 kΩ / 100 mV.
47 kΩ / 100 mV.
Aux (impedance / sensitivity)
47 kΩ / 200 mV.
47 kΩ / 200 mV.
20 kΩ / 100 mV.
20 kΩ / 100 mV.
CD (impedance / sensitivity)
-‐
47 kΩ / 500 mV.
80 kΩ / 570 mV.
80 kΩ / 570 mV.
Tuner (impedance / sensitivity)
-‐
-‐
56 kΩ / 300 mV.
56 kΩ / 300 mV.
Tape (impedance / sensitivity)
-‐
-‐
20 kΩ / 200 mV.
20 kΩ / 200 mV.
Tape output
4.7 kΩ / 350 mV.
4.7 kΩ / 350 mV.
-‐
-‐
Monitor output
x
x
8 Ω / 1 W.
8 Ω / 1 W.
Pre-‐output
600 Ω / 1 V.
600 Ω / 1 V.
600 Ω / 1 V.
600 Ω / 1 V.
Outputs
8 Ω / 25 V / 70 V / 100 V.
Music/speech: 8 Ω / 100 V.
Output power
60 W.
120 W.
4 Ω / 8 Ω / 16 Ω / 25 V / 70 V / 100 4 Ω / 8 Ω / 16 Ω / 25 V / 70 V / 100 V.
V.
180 W.
240 W.
Frequency response
50 Hz -‐ 20 kHz +/-‐ 3 dB.
50 Hz -‐ 20 kHz +/-‐ 3 dB.
30 Hz -‐ 20 kHz +/-‐ 3 dB.
30 Hz -‐ 20 kHz +/-‐ 3 dB.
EQ controls
Bass: +/-‐ 10 dB.
Bass: +/-‐ 10 dB.
Bass: +/-‐ 10 dB.
Bass: +/-‐ 10 dB.
Treble: +/-‐ 10 dB.
Line type: > 75 dB.
Line type: > 80 dB.
Line type: > 80 dB.
Line type: > 80 dB.
Mic type: 60 dB.
Mic type: 60 dB.
Mic type: 60 dB.
S/N ratio
Mic type: 60 dB.
Main supply
AC 115/230 V, 50/60 Hz. / DC 24V AC 115/230 V, 50/60 Hz. / DC 24V AC 115/230 V, 50/60 Hz.
AC 115/230 V, 50/60 Hz.
Power consumption
170 W.
170 W.
360 W.
480 W.
Dimensions
483 x 88 x 260 (WxHxD).
483 x 88 x 300 (WxHxD).
483 x 88 x 335 (WxHxD).
483 x 88 x 335 (WxHxD).
Weight
8 kg.
10 kg.
11.6 kg.
13 kg.
44
PCA-series
132 mm.
Cost efficient 100V power amplifiers
483 mm.
305 mm.
88 mm.
PCA 410
483 mm.
400 mm.
PCA 500
PCA 410 is suitable for many installations as it features 4 independent 250 W outputs each with their own independent tone and volume
controls. It supports low and high-impedance loads. 4 control inputs can be independently configured as Mic or Line with +48 V phantom
power, phase inversion and a high-pass filter. The first Mic input has a selectable priority circuit. In addition, 2 Aux inputs, chime, siren and
tel.paging are avilaibale in the mix.
PCA 500 is a 480 W power amplifier designed for installed sound applications that explicitly require high power levels.
It features a 3 band equalizer, a balanced input and stereo jack input, low-impedance output (4-8Ω) and 70-100V line. It is possible to
connect several terminals through the Link output. Thanks to its signal auto-compression function, PCA 500 is protected from speaker short
circuits. The output signal automatically drops when the temperature becomes too high and in the case of overheating the amp stops working and a LED indicator switches on. An overvoltage protection eliminates current fluctuations and peaks.
PCA500 Features
- 480 W power amplifier for installed sound applications.
- 3 band equalizer.
- Balanced input.
- LED indicators for signal, current peak, overheat and
protection.
- 2U rack enclosure.
Technical Data
Audio inputs
Mic (impedance / sensitivity)
Line (impedance / sensitivity)
Aux (impedance / sensitivity)
Outputs
chime tones
EQ controls
Output power
Frequency response
S/N ratio
Main supply
Power consumption
Dimensions
Weight
PCA410 Features
- Multi-channel power amplifier.
- 4 independent outputs.
- Mixer with 4 configurable inputs (Mic/Line with +48 V
phantom power, phase inversion and High-pass filter), 2 Aux
inputs (Line), chime, siren and tel. paging.
- Possibility to bridge 2 output channels between them.
- 3U rack enclosure.
PCA 410
4 Mic, 4 Line, 2 Aux.
600 Ω / 2.8 mV bal.
3 kΩ / 316 mV bal.
50 kΩ / 316 mV Unbal.
4 Ω, 8 Ω / 25 V / 70 V /100 V x 4.
440 / 554 / 659 / 880 Hz.
Bass: +/-‐ 10 dB.
-‐
250 W x 4.
50 Hz -‐ 17 kHz +/-‐ 3 dB.
Line type: > 90 dB.
Mic type: > 80 dB.
AC 230 V, 50 Hz.
1100 W.
483 x 88 x 410 (WxHxD).
25.2 kg.
PCA 500
1 Line.
-‐
20 kΩ / 1 V.
-‐
4 Ω, 8 Ω / 70 V /100 V x 4.
-‐
Bass: +/-‐ 12 dB.
Mid: +/-‐ 12 dB.
480 W.
50 Hz -‐ 22 kHz +/-‐ 3 dB.
> 90 dB.
-‐
AC 230 V, 50 Hz.
640 W.
483 x 88 x 400 (WxHxD).
20 kg.
45
iWA-1
Wall-mount controller and 2x12W amlifier.
The iWA 1 combines an attractive and user friendly volume control with a 20 W amplifier within the diminutive size of a single gang electrical box wall plate.
Features
- Wall-mount audio controller and 20 W
class D amplifier.
- 2 inputs: 3,5 mm mini-jack input on front
panel (with override) and terminal blocks
on rear panel.
- Central encoder for volume control and On/Off switch.
- LED back light indicator indicates audio
level.
- Surface mounted plastic electrical box
optional for easy installation.
-Accepts 24 to 30 V dc from external
power supply (not included).
Listen to the music you like.
One of the main benefits of the iWA 1 is that it features two audio inputs: the rear input
can be fed by a general background music signal, the front panel input makes possible the connection of a personal audio player (e.g. iPod, etc.). This front panel input
overrides the rear audio connection. This is a great solution for hotels because their
customers can listen to their own music.
An elegant design and an intuitive device.
The elegant styling of iWA 1 allows its integration in virtually any commercial audio
installation. With its modern lines and backlit LED rotary knob, it is another element of
the interior decor.
Very intuitive, its central encoder makes possible the overall control of the installation.
Push it to switch on/off the device and turn it to adjust volume: with iWA 1, anyone can
control the audio. The iWA 1 is simplicity itself!
Ideally suited to driving the CS PRO and NEO series speakers.
Technical Data
Power output 8 Ω
(THD + N < 1%)
Minimum total load
Sensitivity
iWA 1
16 W (24 V dc).
18 W (27 V dc).
20 W (30 V dc).
4 Ω.
840 mV (24 V dc).
940 mV (27 V dc).
1 V (30 V dc).
Gain
20 dB
SNR (THD + N <1%)
99 dB
Input
Output
Main supply
Dimensions
Weight
Terminal blocks (rear).
3.5 mm mini-jack (front).
Terminal blocks.
24 to 30 V dc.
86 x 86 x 55 mm (WxHxD).
0,2 kg.
iWB 1
55 mm.
65 mm.
65 mm.
The included electrical
box iWB 1 is suitable
for IWA 1.
86 mm.
86 mm.
28 mm.
MTX Series
46
Matrix Processor
MTX3
Rear Panel
MTX5-D
Matrix processor equipped with a variety of programmable features designed
to maximize the performance of sound systems in commercial installations.
• Inputs; 8 mono (mic/line), 2 stereo (line), 16digital (via YDIF*) .
• Outputs; 8 mono (line), 16 digital (via YDIF*) .
• Can expand YDIF* equipped inputs and outputs with Exi8/Exo8 expanders.
• SD Card Slot for playback of MP3/WAV files stored on an SD Memory Card.
• Functions for worry-free operation; Feedback Suppressor, Auto Gain Control, Priority Ducker.
• Two useful digital processors “Reverb” and “Echo” for entertainment applications.
• Remotely control the volume and presets of multiple zones with DCP series wall mount digital controllers.
• Wireless DCP for iPhone and iPod touch is free available on the App Store.
• Equipped with Network port and GPI ports that offer compatibility with touch panel controllers such as AMX/Crestron.
• Easy setup and parameter control with MTX Editor.
(see page 55)
*YDIF: the newly developed digital transmission format; a unique propriety Yamaha technology that delivers 16ch audio and word clock transmission via standard CAT5 Ether cable.
OPTIONS
INPUT EXPANDER/OUTPUT EXPANDER
EXi8 Input Expander
1U
EXi8 input expanders convert analog microphone/line audio to digital and
transmits the signal using Yamaha's YDIF format. The EXi8's preamps can be
controlled remotely from an MTX processor via Ethernet cable.
EXo8 Output Expander
EXo8 output expanders feature 8 channels of DA converters that produce
high quality analog audio by converting digital output from MTX Series
processors via YDIF.
DIGITAL CONTROL PANELS
DCP Series Digital Control Panel provide flexible external control of several functions such as preset recall, levels, and SD card playback.
All three models are available in either US or EU standardized sizes, built to meet the specifications of most regions around the globe.
DCP1V4S
1 Volume & 4 Switch equipped
Wall Mount Control panel for
MTX Series
Easy connection by CAT5 carrying
RS485 + power
Maximum 8 DCPs can be
connected to 1 MTX Series
DCP4S
4 Switch equipped Wall Mounut
Control panel for MTX Series
RS485 + power
DCP4V4S
4 Volume & 4 Switch equipped
Wall Mounut Control panel for
MTX Series
RS485 + power
1U
47
MTX Series
Memory bank
Mixing Capacity
Output Channel
Functions
Internal Processing
Sampling frequency rate
Signal delay
Input terminal
PRESET: 50
Mixing Channel :
Input Channel Functions
8 Mono + 3 Stereo + 2 Effect
Return + 8 Insert
8 Mono
Output Busses :
Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control,
Feedback suppressor (only available in ch 1-4)
Stereo CH: 3-band PEQ, Comp, Auto Gain Control
Room Delay, Room EQ, Speaker Processor, X-Over
(1way,2way), Delay, 6-band PEQ, Limiter
Priority Ducking, Ambient Noise Compensator
48kHz
GAIN
+66dB
INPUT 1-8
Input level
Actual load For use with
impedance
nominal
10kW
-6dB
ST IN 1,2
Nominal
50-600W
Mics
& 600W
Lines
600W Lines
Max.
before clip
-62dBu
-42dBu
+10dBu
+30dBu
-10dBV
+10dBV
Connector
Euroblock*
RCA Pin Jack**
ANALOG OUTPUT SPECIFICATIONS
Frequency response
Less than 2.5ms (AD-DA @48kHz)
Less than 0.05% (+4dBu, Gain:-6dB),
Less than 0.1% (+4dBu, Gain:+66dB)
20Hz to 20kHz, +0.5dB, -1.5dB
Dynamic range
Hum & noise level
107dB (Gain:-6dB)
-62dBu (Gain：+66dB), -81dBu (Gain：-6dB)
Phantom Power
+48V
Format
Level
IN/OUT
Crosstalk (@1kHz)
-100dB
YDIF In
YDIF
RS-422
16 IN
RJ45
Heat diffusion
Power requirements
43kcal/h max
AC100V-240V 50Hz/60Hz
YDIF Out
YDIF
RS-422
16 OUT
RJ45
Power consumption
50W
CONTROL I/O SPECIFICATIONS
Total harmonic
distortion*1
(20Hz to 20kHz), Rs=150Ω
480 x 44 x 362mm (18.9" x 1.7" x 14.3"), 1U
Weight
4.8kg (10.6lbs)
*1 Total harmonic distortion is measured with a 18dB/Oct filter @80kHz.
*2 Hum & noise level is measured with a 6dB/oct filter @12.7kHz; equivalent to 20kHz filter
with infinite dB/Oct attenuation.
Output terminal
OUTPUT 1-8
Actual Source
Impedance
For use with
nominal
75Ω
10kΩ Lines
Output level
Max.
before clip
+4dBu
+24dBu
Connector
Nominal
Euroblock*
DIGITAL INPUT AND OUTPUT SPECIFICATIONS
Terminal
Terminal
Connector
Format
Level
—
0V-5V (IN8 Withstand voltage +24V)
OUT
—
Open Collector
Euroblock
+V
—
DC5V
Euroblock
Network
Ethernet
100Base-TX
—
RJ-45
REMOTE
—
RS-232C (BAUD RATE : 38.4kbps or
115.2kbps)
D-sub
(Male)
DCP
—
—
RJ-45
GPI
8IN
4OUT
IN
/
Connector
Euroblock
9pin
BLOCK DIAGRAM
DIMENSIONS
4
351
361.4
unit : mm
44
480
MG206C, MG166C, MG124C, MG102C
48
Analogue mixing Consoles
12U
MG206C
12U
MG166C
12U
12U
MG124C
MG102C
A selection of lightweight, portable mixing consoles featuring Yamaha’s
one-knob compressor for advanced sonic control.
• 10, 12, 16, or 20 inputs in remarkably lightweight, portable designs.
• Yamaha’s innovative one-knob compressor lets you easily dial in the amount of compression you need.
• High-quality Neutrik™ balanced XLR connectors on mono microphone/line channels and XLR-equipped stereo channels.
• Top-mounted input and output connectors for easy setup and re-patching.
• High-performance microphone preamplifiers with switchable phantom power.
• 3-band channel EQ and high-pass filters (sweepable midrange on the MG206C, MG166C).
• Smooth 60-millimeter faders & illuminated channel ON switches (MG206C, MG166C, MG124C).
• The MG102C has a single stereo bus (i.e. two mono buses), while all other models feature one or two additional stereo group buses and
outputs for convenient channel grouping.
• AUX sends with master send controls for convenient processing and monitoring.
• Return level controls for the AUX and STEREO buses.
• Bright meters for visual level monitoring.
• Optional microphone stand mount available for the MG102C.
• MG206C, MG166C rack mountable.
OPTION
BMS10A
Mic Stand Adaptor
for MG102C
RK-MG124
Rackmount Kit for
MG124C
RK-MG102
Rackmount Kit for
MG102C
49
MG206C
MG166C
MG124C
MG102C
16
10
6
12 mono + 4 stereo
8 mono + 4 stereo
4 mono + 4 stereo
4
2 mono + 4 stereo
20
16
12
10
4
4
4
3
2
2
Stereo
Stereo
Mic/Line inputs
Line inputs
Mixer input channels
Group buses
AUX buses
Main buses
Total harmonic distortion*1 (THD+N)
Frequency response
Hum and noise level*2
Crosstalk (@1kHz)
Stereo
Less than 0.1%, 20Hz-20kHz
0, +1, -3dB , 20Hz-20kHz
Equivalent input noise (EIN): -128dBu
Residual output noise: -98dBu
-70dB
PA-30 AC adaptor (AC35VCT, 1.4A)
100V, 120V, 220V, 230V or 240V; 50/60Hz
Power supply adaptor
40W
Power consumption
478 x 102 x 496mm (18.8" x 4.0" x 19.5")
6.0kg (13.2lbs)
Net weight
2
Stereo
100V, 120V, 220V, 230V or 240V; 50/60Hz
100V, 120V, 220V, 230V or 240V; 50/60Hz
30W
478 x 105 x 496mm (18.8" x 4.1" x 19.5")
100V, 120V, 220V, 230V or 240V; 50/60Hz
30W
21W
256.6 x 62.2 x 302.5mm (10.1" x 2.5" x 11.9")
1.5kg (3.3lbs)
346.2 x 86.1 x 436.6mm (13.6" x 3.4" x 17.2")
3.0kg (6.6lbs)
5.3kg (11.7lbs)
*2 Hum & noise level is measured with a 6dB/oct filter @12.7kHz; equivalent to 20kHz filter with infinite dB/Oct attenuation
CH IN MIC (1-12)
-60dB
-16dB
3kΩ
50-600Ω Mics
CH IN LINE (1-12)
-34dB
+10dB
10kΩ
ST CH MIC IN
(13/14-19/20)
-60dB
-16dB
ST CH LINE IN
(13/14, 15/16)
-34dB
+10dB
Input Level
Sensitivity Nominal
Max.
before Clip
Connector
Terminal
Actual Source For Use With
Impedance
Nominal
MG206C
-34dB
+10dB
CH INSERT IN (1-12)
RETURN [L,R]
2TR IN [L,R]
ST CH LINE IN
(17/18, 19/20)
CH IN MIC (1-8)
CH IN LINE (1-8)
ST CH MIC IN
(9/10, 11/12)
-16dB
-34dB
+10dB
-60dB
-16dB
-34dB
+10dB
ST CH IN(13/14, 15/16)
CH INSERT IN (1-8)
RETURN [L,R]
2TR IN [L,R]
ST CH LINE IN
(9/10, 11/12)
10kΩ Lines
10kΩ Lines
+4dBu
0dBu
+20dBu
+20dBu
10kΩ Lines
10kΩ Lines
-10dBV
+4dBu
+10dBV
+20dBu
100Ω
40kΩ Lines
3mW
75mW
STEREO OUT [L,R]
GROUP OUT [1-4]
75Ω
150Ω
MG166C
600Ω Lines
+4dBu
10kΩ Lines
+4dBu
+24dBu
+20dBu
AUX SEND (1-3)
CH INSERT OUT (1-8)
150Ω
75Ω
10kΩ Lines
10kΩ Lines
+4dBu
0dBu
+20dBu
+20dBu
REC OUT [L, R]
MONITOR OUT [L, R]
PHONES OUT
600Ω
150Ω
100Ω
10kΩ Lines
10kΩ Lines
-10dBV
+4dBu
+10dBV
+20dBu
40kΩ Lines
3mW
75mW
-14dBu
TRS Phone jack*
+30dBu
STEREO OUT [L, R]
GROUP OUT [1, 2]
75Ω
150Ω
MG124C
600Ω Lines
+4dBu
10kΩ Lines
+4dBu
+24dBu
+20dBu
-60dBu
-16dBu
-40dBu
XLR-3-31 type*
-6dBu
AUX SEND (1, 2)
CH INSERT OUT (1-4)
150Ω
75Ω
10kΩ Lines
10kΩ Lines
+4dBu
0dBu
+20dBu
+20dBu
-54dBu
-10dBu
-34dBu
+10dBu
-14dBu
Phone jack**
+30dBu
-10dBV
+4dBu
+10dBV
+20dBu
-10dBu
0dBu
+4dBu
-10dBV
jack**
+10dBu Phone
RCA pin jack
+20dBu TRS Phone jack**
+24dBu Phone jack**
+10dBV RCA pin jack**
600Ω
150Ω
100Ω
10kΩ Lines
10kΩ Lines
-30dBu
-20dBu
-12dBu
-26dBV
REC OUT [L, R]
MONITOR OUT [L, R]
PHONES OUT
40kΩ Lines
3mW
MG102C
75mW
Phone jack (TRS)***
Stereo phone jack**
-80dBu
-36dBu
-54dBu
-10dBu
-80dBu
-36dBu
-54dBu
-10dBu
-60dBu
-16dBu
-34dBu
+10dBu
-60dBu
-16dBu
-34dBu
+10dBu
-40dBu
+4dBu
-14dBu
+30dBu
-40dBu
-6dBu
-14dBu
+30dBu
STEREO OUT [L,R]
AUX SEND
CH INSERT OUT (1-2)
REC OUT [L, R]
MONITOR OUT [L, R]
PHONES OUT
150Ω
150Ω
75Ω
600Ω
150Ω
100Ω
10kΩ Lines
10kΩ Lines
10kΩ Lines
10kΩ Lines
10kΩ Lines
40kΩ Lines
+20dBu
+20dBu
+20dBu
+10dBV
+20dBu
75mW
Phone jack (TRS)***
Phone jack (TRS)***
Phone jack (TRS)**
RCA pin jack**
Phone jack***
Stereo phone jack**
-30dBu
-20dBu
-12dBu
-26dBV
-10dBu
0dBu
+4dBu
-10dBV
Phone jack**
+10dBu RCA
pin jack**
+24dBu Phone jack**
-72dBu
-28dBu
-46dBu
- 2dBu
-72dBu
-28dBu
-46dBu
- 2dBu
-60dBu
-16dBu
-34dBu
+10dBu
-60dBu
-16dBu
-34dBu
+10dBu
-40dBu
+4dBu
-14dBu
+30dBu
-40dBu
-6dBu
-14dBu
+30dBu
-22dBu
-12dBu
- 8dBu
-22dBV
-10dBu
0dBu
+4dBu
-10dBV
jack**
+10dBu Phone
RCA pin jack**
+24dBu Phone jack**
-40dBu
-36dBu
-16dBu
+4dBu
600Ω Lines
-54dBu
-10dBu
-34dBu
+10dBu
-14dBu
TRS Phone jack*
+30dBu
AUX SEND (1-4)
CH INSERT OUT (1-12)
3kΩ
50-600Ω Mics
-80dBu
-36dBu
-60dBu
-16dBu
-40dBu
XLR-3-31 type*
-6dBu
REC OUT [L, R]
MONITOR OUT [L, R]
75Ω
600Ω
150Ω
10kΩ
600Ω Lines
-10dBu
+10dBu
-14dBu
Phone jack**
+30dBu
-14dBu Phone jack**
jack**
+30dBu Phone
RCA pin jack**
-20dBu
0dBu
10kΩ
600Ω Lines
600Ω Lines
600Ω Lines
50-600Ω Mics
600Ω Lines
-34dBu
+10dBu
-34dBu
PHONES OUT
10kΩ
10kΩ
10kΩ
10kΩ
-54dBu
-10dBu
-54dBu
-12dBu
-26dBV
+4dBu
-10dBV
+24dBu Phone jack**
3kΩ
50-600Ω Mics
-80dBu
-36dBu
-60dBu
-16dBu
-40dBu
XLR-3-31 type*
+4dBu
10kΩ
600Ω Lines
-54dBu
-10dBu
-34dBu
+10dBu
3kΩ
50-600Ω Mics
-80dBu
-36dBu
10kΩ
600Ω Lines
10kΩ
10kΩ
10kΩ
10kΩ
600Ω Lines
600Ω Lines
600Ω Lines
600Ω Lines
3kΩ
50-600Ω Mics
10kΩ
600Ω Lines
3kΩ
50-600Ω Mics
10kΩ
600Ω Lines
10kΩ
10kΩ
10kΩ
10kΩ
600Ω Lines
600Ω Lines
600Ω Lines
600Ω Lines
3kΩ
50-600Ω Mics
10kΩ
600Ω Lines
3kΩ
50-600Ω Mics
10kΩ
600Ω Lines
10kΩ
10kΩ
10kΩ
10kΩ
600Ω Lines
600Ω Lines
600Ω Lines
600Ω Lines
XLR-3-31 type*
XLR-3-31 type*
TRS Phone jack*
TRS Phone jack*
STEREO OUT [L,R]
75Ω
GROUP OUT [1-4]
150Ω
150Ω
+4dBu
+4dBu
0dBu
-10dBV
+4dBu
3mW
XLR 3-32 type*
Phone jack*
Phone jack (TRS)***
Phone jack (TRS)***
Phone jack (TRS)**
RCA pin jack**
Phone jack (TRS)***
Stereo phone jack**
XLR 3-32 type*
Phone jack (TRS)*
Phone jack (TRS)***
Phone jack (TRS)***
Phone jack (TRS)**
RCA pin jack**
Phone jack (TRS)*
Stereo phone jack**
XLR 3-32 type*
Phone jack (TRS)*
Phone jack (TRS)***
Phone jack (TRS)***
Phone jack**
RCA pin jack**
*** : Impedance balanced
DIMENSIONS
unit : mm
Phone jack**
478
105
(102: MG206C)
346.2
496
MG102C
-60dB
-16dB
-34dB
CH IN LINE (1, 2)
+10dB
-60dB
ST CH MIC IN
(3/4, 5/6)
-16dB
-34dB
ST CH LINE IN
(3/4, 5/6)
+10dB
ST CH IN (7/8, 9/10)
CH INSERT IN (1, 2)
RETURN [L,R]
2TR IN [L,R]
CH IN MIC (1, 2)
Connector
+24dBu
+20dBu
-60dBu
MG124C
-60dB
-16dB
-34dB
CH IN LINE (1-4)
+10dB
-60dB
ST CH MIC IN
(5/6,7/8)
-16dB
-34dB
ST CH LINE IN
(5/6,7/8)
+10dB
ST CH IN (9/10,11/12)
CH INSERT IN (1-4)
RETURN [L,R]
2TR IN [L,R]
CH IN MIC (1-4)
Max.
before Clip
MG206C
600Ω Lines
+4dBu
10kΩ Lines
+4dBu
-80dBu
MG166C
-60dB
Output Level
Nominal
86.1
256.6
62.2
302.5
Gain
436.6
Actual Load For Use With
Impedance
Nominal
Terminal
XLR-3-31 type*
TRS Phone jack*
XLR-3-31 type*
Phone jack**
Sensitivity is the lowest level that will produce the nominal output level when the unit is set to maximum level.
MG166C, MG166CX, MG206C,
MG166C-USB, MG166CX-USB,
MG206C-USB
MG124C, MG124CX
MG102C, MG82CX
MG166CX, MG124CX, MG82CX
50
Analogue mixing Consoles
MG166CX
MG124CX
MG82CX
Yamaha’s one-knob compressor and built-in SPX effects give these mixers
refined creative control.
• 8, 12, or 16 inputs in remarkably lightweight, portable designs.
• Yamaha’s innovative one-knob compressor lets you easily dial in the amount of compression you need.
• Built-in digital SPX multi-effect processor.
• All models feature high-quality Neutrik™ balanced XLR connectors on mono microphone/line channels and XLR-equipped stereo
channels.
• Top-mounted input and output connectors for easy setup and re-patching.
• High-performance microphone preamplifiers with switchable phantom power.
• 3-band channel EQ and high-pass filters (sweepable midrange on the MG166CX).
• Smooth 60-millimeter faders & illuminated channel ON switches.
• The MG82CX has a single stereo bus (i.e. two mono buses), while the other models feature one or two additional stereo group buses
and outputs for convenient channel grouping.
• AUX sends with master send controls for convenient processing and monitoring.
• Return level controls for the AUX and STEREO buses.
• Bright meters for visual level monitoring.
• Optional microphone stand mount available for the MG82CX.
• MG166CX rack mountable.
OPTION
BMS10A
Mic Stand Adaptor
for MG82C
FC5
Foot Switch
RK-MG124
Rackmount Kit for
MG124CX
RK-MG102
Rackmount Kit for
MG82CX
51
Mic/Line inputs
Line inputs
Mixer input channels
MG166CX
MG124CX
MG82CX
10
8 mono + 4 stereo
6
4 mono + 4 stereo
4
2 mono + 3 stereo
16
12
8
4
2
2 (Incl. 1x Effect send)
Group buses
3 (Incl. 1x Effect send)
Stereo
AUX buses
Main buses
Total harmonic distortion*1 (THD+N)
Frequency response
Hum & noise level*2
1 (Effect send)
Stereo
Stereo
Less than 0.1%, 20Hz-20kHz
0, +1, -3dB , 20Hz-20kHz
-70dB
Crosstalk (@1kHz)
100V, 120V, 220V, 230V or 240V; 50/60Hz
Power supply adaptor
Net weight
Accessories
100V, 120V, 220V, 230V or 240V; 50/60Hz
35W
30W
21W
478 x 105 x 496mm (18.8" x 4.1" x 19.5")
5.5kg (12.1lbs)
346.2 x 86.1 x 436.6mm (13.6" x 3.4" x 17.2")
3.2kg (7.0lbs)
256.6 x 62.2 x 302.5mm (10.1" x 2.5" x 11.9")
1.6kg (3.5lbs)
Power consumption
100V, 120V, 220V, 230V or 240V; 50/60Hz
Owners manual, AC adaptor
*2 Hum & noise level is measured with a 6dB/oct filter @12.7kHz; equivalent to 20kHz filter with infinite dB/Oct attenuation
Gain
Actual Load For Use With
Impedance
Nominal
Input Level
Sensitivity Nominal
Max.
before Clip
Connector
Terminal
Actual Source For Use With
Impedance
Nominal
CH IN LINE (1-8)
ST CH MIC IN
(9/10, 11/12)
ST CH LINE IN
(9/10, 11/12)
-60dB
-16dB
-34dB
150Ω
+24dBu
+20dBu
AUX SEND (1, 2)
EFFECT SEND
150Ω
150Ω
10kΩ Lines
10kΩ Lines
+4dBu
+4dBu
+20dBu
+20dBu
+10dB
-60dB
-40dBu
XLR-3-31 type*
-6dBu
CH INSERT OUT (1-8)
REC OUT [L, R]
75Ω
600Ω
10kΩ Lines
10kΩ Lines
0dBu
-10dBV
+20dBu
+10dBV
-16dB
-34dB
-34dBu
+10dBu
-14dBu
Phone jack**
+30dBu
MONITOR OUT [L, R]
PHONES OUT
150Ω
100Ω
10kΩ Lines
40kΩ Lines
+4dBu
3mW
+20dBu
75mW
+10dB
+10dBu
STEREO OUT [L, R]
GROUP OUT [1, 2]
75Ω
150Ω
MG124CX
600Ω Lines
+4dBu
10kΩ Lines
+4dBu
+24dBu
+20dBu
AUX SEND
EFFECT SEND
150Ω
150Ω
10kΩ Lines
10kΩ Lines
+4dBu
+4dBu
+20dBu
+20dBu
CH INSERT OUT (1-4)
REC OUT [L, R]
MONITOR OUT [L, R]
75Ω
600Ω
150Ω
10kΩ Lines
10kΩ Lines
0dBu
-10dBV
+20dBu
+10dBV
PHONES OUT
100Ω
10kΩ Lines
40kΩ Lines
+4dBu
3mW
+20dBu
75mW
-80dBu
-60dBu
-40dBu
-36dBu
-16dBu
+4dBu
600Ω Lines
-54dBu
-10dBu
-34dBu
+10dBu
3kΩ
50-600Ω Mics
-80dBu
-36dBu
10kΩ
600Ω Lines
3kΩ
50-600Ω Mics
10kΩ
STEREO OUT [L,R]
75Ω
GROUP OUT [1-4]
-14dBu
TRS Phone jack*
+30dBu
-60dBu
-16dBu
-54dBu
-10dBu
XLR-3-31 type*
Phone jack**
RCA pin jack**
ST CH IN
(13/14, 15/16)
-
10kΩ
600Ω Lines
-30dBu
-10dBu
CH INSERT IN (1-8)
-
10Ωk
600Ω Lines
-20dBu
0dBu
RETURN [L,R]
-
10kΩ
600Ω Lines
-12dBu
+4dBu
+24dBu Phone jack**
2TR IN [L,R]
-
10kΩ
600Ω Lines
-26dBV
-10dBV
CH IN MIC (1-4)
-60dB
-16dB
3kΩ
50-600Ω Mics
-80dBu
CH IN LINE (1-4)
-34dB
+10dB
10kΩ
600Ω Lines
-36dBu
-54dBu
-60dBu
-16dBu
-34dBu
3kΩ
50-600Ω Mics
10kΩ
600Ω Lines
-10dBu
-80dBu
-36dBu
-54dBu
-10dBu
+10dBu
-60dBu
-16dBu
-34dBu
+10dBu
-40dBu
XLR-3-31 type*
+4dBu
-14dBu
TRS Phone jack*
+30dBu
-40dBu
XLR-3-31 type*
-6dBu
-14dBu
Phone jack**
+30dBu
+10dBu
MG124CX
ST CH MIC IN
(5/6,7/8)
ST CH LINE IN
(5/6,7/8)
-60dB
-16dB
-34dB
+10dB
Phone jack**
RCA pin jack**
ST CH IN
(9/10,11/12)
-
10kΩ
600Ω Lines
-30dBu
-10dBu
CH INSERT IN (1-4)
-
10kΩ
600Ω Lines
-20dBu
0dBu
RETURN [L,R]
-
10kΩ
600Ω Lines
-12dBu
+4dBu
+24dBu Phone jack**
2TR IN [L,R]
-
10kΩ
600Ω Lines
-26dBV
-10dBV
-72dBu
-28dBu
-46dBu
- 2dBu
-72dBu
-28dBu
-46dBu
- 2dBu
-60dBu
-16dBu
-34dBu
+10dBu
-60dBu
-16dBu
-34dBu
+10dBu
-40dBu
+4dBu
-14dBu
+30dBu
-40dBu
-6dBu
-14dBu
+30dBu
+10dBu
STEREO OUT [L,R]
150Ω
EFFECT SEND
CH INSERT OUT (1-2)
150Ω
75Ω
-
10kΩ
600Ω Lines
-22dBu
-10dBu
CH INSERT IN (1, 2)
-
10kΩ
600Ω Lines
-12dBu
0dBu
RETURN [L,R]
-
10kΩ
600Ω Lines
- 8dBu
+4dBu
+24dBu Phone jack**
2TR IN [L,R]
-
10kΩ
600Ω Lines
-22dBV
-10dBV
600Ω Lines
3kΩ
50-600Ω Mics
10kΩ
600Ω Lines
TRS Phone jack***
TRS Phone jack**
RCA pin jack**
TRS Phone jack*
Stereo phone jack**
XLR 3-32 type*
TRS Phone jack*
TRS Phone jack***
TRS Phone jack***
TRS Phone jack***
Phone jack**
RCA pin jack**
TRS Phone jack***
Stereo phone jack**
REC OUT [L, R]
MONITOR OUT [L, R]
PHONES OUT
600Ω
150Ω
100Ω
+4dBu
+4dBu
+20dBu
+20dBu
TRS Phone jack***
TRS Phone jack***
10kΩ Lines
10kΩ Lines
10kΩ Lines
40kΩ Lines
0dBu
-10dBV
+4dBu
3mW
+20dBu
+10dBV
+20dBu
75mW
TRS Phone jack**
RCA pin jack**
Phone jack***
Stereo phone jack**
*** : Impedance balanced
DIMENSIONS
unit : mm
478
346.2
105
XLR-3-31 type*
86.1
256.6
62.2
436.6
ST CH IN (7/8)
ST CH MIC IN
(3/4, 5/6)
10kΩ
TRS Phone jack***
TRS Phone jack***
10kΩ Lines
10kΩ Lines
496
ST CH LINE IN
(3/4, 5/6)
CH IN LINE (1, 2)
50-600Ω Mics
XLR 3-32 type*
TRS Phone jack*
-60dB
-16dB
-34dB
+10dB
-60dB
-16dB
-34dB
+10dB
3kΩ
Connector
MG82CX
MG82CX
CH IN MIC (1, 2)
Max.
before Clip
MG166CX
600Ω Lines
+4dBu
10kΩ Lines
+4dBu
MG166CX
CH IN MIC (1-8)
Output Level
Nominal
302.5
Terminal
TRS Phone jack*
XLR-3-31 type*
Phone jack**
Phone jack**
RCA pin jack**
Sensitivity is the lowest level that will produce the nominal output level when the unit is set to maximum level.
MG166C, MG166CX, MG206C,
MG166C-USB, MG166CX-USB,
MG206C-USB
MG124C, MG124CX
MG102C, MG82CX
52
MGP16X, MGP12X
Mixing Consoles
MGP16X
11U
Rear Panel
MGP12X
11U
Rear Panel
From the preamps, EQ and effects to the Hybrid Channel functions and iPod/
iPhone connectivity—every aspect, every feature, every sound,
establishes the MGP as a premium mixing console in a class of its own.
• Studio-grade discrete Class A “D-PRE” mic preamps with inverted Darlington circuitry
• Musical X-pressive EQ based on Yamaha’s famed VCM technology
• Professional 1-knob compressors with LED indicators
• High-grade dual digital effect processors: high-resolution REV-X reverbs and Classic SPX effects
• Stereo Hybrid Channels utilizing powerful proprietary DSP technology
• Digital connectivity for iPod/iPhone
• MGP Editor for detailed control of the console's DSP settings via iPod/iPhone
• Rugged impact-resistant powder-coated metal chassis
• Integrated Rack-ears for easy rack mounting
• Internal universal power supply for world-wide use
Integrated Rack-ears
53
MGP16X, MGP12X
MGP16X
MGP12X
Mic inputs
10
6
Line inputs
LINE: 8mono+4stereo, CH INSERT: 8, RETURN: 1stereo, 2TR IN: 1 stereo
LINE: 4mono+4stereo, CH INSERT IN: 4, RETURN: 1stereo, 2TR IN: 1 stereo
16 Line Inputs (8 mono and 4 stereo)
Mixing channels
Group buses
4 GROUP Buses + ST Bus
AUX buses
2 AUX Sends + 2 FX Sends
Total harmonic distortion*1
0.02% (20Hz to 20kHz) @ +14dBu
Frequency response
+0.5/-1.0dB 20Hz~20kHz, refer to the nominal output level @1kHz
Hum & noise level*2 (20Hz to 20kHz)
Rs=150Ω, Input Gain=Max
−128dBu Equivalent Input Noise
−102dBu Residual Output Noise
Crosstalk (@1kHz)
-74dB
Phantom Power
+48V
Monaural Input Channel Equalization
HIGH:±15dB (8kHz shelving)
MID:±15dB (250Hz~5kHz peaking: CH1-8,13-16)
LOW:±15dB (125Hz shelving)
MID:±15dB (250Hz~5kHz peaking: CH1-4,9-12)
Stereo Input Channel Equalization
MID:±15dB (2.5kHz peaking: CH9-12)
MID:±15dB (2.5kHz peaking: CH5-8)
Compressor (COMP)
CH1-8: control x 1 (Gain/Threshold/Ratio)
Internal Digital Effect
FX1: REV-X
8 PROGRAM, PARAMETER control
FX2: SPX
LED Level Meter Pre MONITOR Level
2 x 12points LED meter(PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30dB) PEAK lights if the signal comes within 3dB of the clipping level.
Signal Indicator
PEAK indicator (red), SIG indicator (green) Peak lights if the signal comes within 3dB of the clipping level.
USB Audio USB IN/OUT
Power requirements
Power consumption
100–240 V 50/60 Hz, auto sensing, IEC input
55W max
45W max
447 x 143 x 495 mm (17.6" x 5.6" x 19.5")
348 x 143 x 495 mm (13.7" x 5.6" x 19.5")
9.0 kg (19.8 lb)
7.5 kg (16.5 lb)
Weight
*2 Hum & noise level is measured with a 6dB/oct filter @12.7kHz; equivalent to 20kHz filter with infinite dB/Oct attenuation.
Input terminal
PAD
GAIN
Actual
source
impedance
-60dB
MONO CH 0
INPUT
-16dB
MGP16X:
3kΩ
1–8
-34dB
MGP12X:
1–4
26dB
+10dB
-60dB
3kΩ
STEREO CH
INPUT
MGP16X: 9–12
MGP12X: 5–8
-16dB
-34dB
For use Input level
with
nominal
Sensitivity*1
50600Ω
Mics
600Ω
Lines
50600Ω
Mics
Nominal
Max.
before clip
-80 dBu
(0.078 mV)
-60 dBu
(0.775 mV)
-40 dBu
(7.75 mV)
-36 dBu
(12.3 mV)
-16 dBu
(123 mV)
+4 dBu
(1.23 V)
-54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155 mV)
-10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
-80 dBu
(0.078 mV)
-60 dBu
(0.775 mV)
-40 dBu
(7.75 mV)
-36 dBu
(12.3 mV)
-16 dBu
(123 mV)
-6dBu
(389mV)
-54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155 mV)
-10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
-54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155 mV)
-10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
Combo jack*
XLR-3-31
type*
10kΩ
600Ω
Lines
STEREO CH
-34dB
INPUT
10kΩ
MGP16X: 13–16
MGP12X: 9–12 +10dB
600Ω
Lines
MONO CH INSERT IN
MGP16X: 1–8
MGP12X: 1–4
10kΩ
600Ω
Lines
-20 dBu
(77.5 mV)
0 dBu
(0.775 V)
+20 dBu
(7.75 V)
TRS Phone
Jack**
RETURN (L, R)
10kΩ
600Ω
Lines
-12 dBu
(195 mV)
+4 dBu
(1.23 V)
+24 dBu
(12.3 V)
Phone
Jack**
2TR IN [L,R]
10kΩ
600Ω
Lines
-26 dBV
(50.1 mV)
-10 dBV
(0.316 V)
+10 dBV
(3.16 V)
RCA Pin
Jack**
+10dB
Phone
jack**
Phone jack**
RCA pin
jack**
Output Level
Actual
source
impedance
For use with
nominal
ST OUT [L,R]
75Ω
600Ω Lines +4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR3-32 type*
Phone jack*
GROUP OUT (1-4)
150Ω
10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone jack*
AUX SEND (1, 2)
75Ω
600Ω Lines +4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR3-32 type*
FX SEND (1, 2)
150Ω
10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone jack***
MONO CH INSERT
OUT
MGP16X: 1–8
MGP12X: 1–4
REC OUT [L,R]
150Ω
10kΩ Lines 0 dBu
+20 dBu
(0.775 V) (7.75 V)
Phone jack**
600Ω
10kΩ Lines -10 dBV
(0.316 V)
+10 dBV
(3.16 V)
RCA Pin Jack**
10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone jack***
Output terminal
Connector
MONITOR OUT [L,R] 150Ω
PHONES OUT
100Ω
Nominal
40Ω
Phones
3mW
Connector
Max.
before clip
75mW
ST Phone Jack**
*** Phone jacks are impedance balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
DIGITAL INPUT SPECIFICATIONS
Terminal
Format
Connector
USB IN
USB A type
unit : mm
DIMENSIONS
MGP16X
MGP12X
146
146
478
495
478
143
348
495
143
447
54
MGP24X, MGP36X
Mixing Consoles
MGP32X
Rear Panel
MGP24X
Rear Panel
Premium class analogue mixing consoles.
High capacity and features for serious live sound applications.
• Studio-grade discrete Class A “D-PRE” mic preamps with inverted Darlington circuitry
• Musical X-pressive EQ based on Yamaha’s famed VCM technology
• Professional 1-knob compressors with LED indicators
• High-grade dual digital effect processors: high-resolution REV-X reverbs and Classic SPX effects
• Stereo Hybrid Channels utilizing powerful proprietary DSP technology
• Digital connectivity for iPod/iPhone
• MGP Editor for detailed control of the console's DSP settings via iPod/iPhone
• Rugged impact-resistant powder-coated metal chassis
• Record to or playback from a connected USB device
• 31-band GEQ with selectable 9 flex band or 14 fixed band mode
• Three-band master compressor assigned to the stereo bus
• Internal universal power supply for world-wide use
55
MGP24X, MGP36X
MGP32X
MGP24X
Mic inputs
24
16
Line inputs
LINE: 24 mono+ 4 stereo, CH INSERT: 24
LINE: 16 mono+ 4 stereo, CH INSERT IN: 16
Mixing channels
Group buses
4 GROUP Buses + ST Bus
AUX buses
6 AUX Sends + 2 FX Sends
Total harmonic distortion*1
0.02% (20Hz to 20kHz) @ +14dBu
Frequency response
+0.5/-1.0dB 20Hz~20kHz, refer to the nominal output level @1kHz
Hum & noise level*2
(20Hz to 20kHz), Rs=150Ω, Input
Gain=Max
−128dBu Equivalent Input Noise
−94dBu Residual Output Noise
Crosstalk (@1kHz)
−74dB
Phantom Power
Input channel EQ
+48V
HIGH
8 kHz, shelving
MID
MGP32X: CHs 1-24, 29-32: 250Hz to 5kHz, peaking CHs 25-28: 2.5kHz, peaking
MGP24X: CHs 1-16, 21-24: 250Hz to 5kHz, peaking CHs 17-20: 2.5kHz, peaking
LOW
125Hz, shelving
FX1: REV-X
FX2: SPX
Compressor (COMP)
Internal Digital Effect
LED Level Meter Pre MONITOR Level
4 x 12points LED meter(PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30dB)
PEAK lights if the signal comes within 3dB of the clipping level.
Signal Indicator
PEAK indicator (red), SIG indicator (green) Peak lights if the signal comes within 3dB of the clipping level.
Power requirements
Power consumption
100–240 V 50/60 Hz, auto sensing, IEC input
86W max
Weight
76W max
1,027 x 169 x 565mm (40.4" x 6.7" x 22.2")
19kg (41.9lb)
819 x 169 x 565mm (32.2" x 6.7" x 22.2")
15.5kg (34.2lb)
*2 Hum & noise level is measured with a 6dB/oct filter @12.7kHz; equivalent to 20kHz filter with infinite dB/Oct attenuation.
Input terminal
Input level
Actual
For use
Max.
source
with
PAD GAIN impedance nominal Sensitivity*1 Nominal before
clip
-60 dBu -40 dBu
-80 dBu
-60dB
(7.75
50(0.078 mV) (0.775
mV)
mV)
600Ω
MONO CH 0
Mics
-36
dBu
-16
dBu
+4 dBu
INPUT
-16dB
(12.3 mV) (123 mV) (1.23 V)
MGP32X:
3kΩ
1–24
-34
dBu
-54 dBu
-14 dBu
MGP24X:
-34dB
(1.55 mV) (15.5
(155 mV)
600Ω
1–16
mV)
26dB
Lines
-10 dBu
+10 dBu +30 dBu
+10dB
(245 mV) (2.45 V) (24.5 V)
-34 dBu -14 dBu
-54 dBu
STEREO CH
-34dB
(1.55 mV) (15.5
(155 mV)
INPUT
mV)
600Ω
10kΩ
MGP32X:
Lines
25–32
-10 dBu
+10 dBu +30 dBu
+10dB
MGP24X: 17–24
(245 mV) (2.45 V) (24.5 V)
MONO CH INSERT
INPUT
MGP32X: 1–24
MGP24X: 1–16
ST CH INSERT INPUT
L,R
TALKBACK INPUT
Output terminal
Actual
For use
source
with
impedance nominal
Connector
ST OUT [L,R]
75Ω
MONO OUT
75Ω
600Ω Lines +4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR3-32
type*
Phone jack*
XLR3-32
type*
GROUP OUT (1-4)
150Ω
75Ω
10kΩ Lines +4 dBu
(1.23 V)
600Ω Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
+24 dBu
(12.3 V)
Phone jack*
AUX SEND (1-6)
MATRIX OUT (1, 2)
150Ω
10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone
jack***
MONO CH INSERT 75Ω
OUT
MGP32X: 1–24
MGP24X: 1–16
10kΩ Lines 0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone jack*
ST CH INSERT
OUT [L,R]
75Ω
10kΩ Lines 0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone
jack***
MONITOR OUT
[L,R]
150Ω
10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone jack*
PHONES OUT
150Ω
40Ω
Phones
75mW
ST Phone
Jack**
Connector
XLR-3-32
type*
Phone
jack**
Phone
jack**
Phone
jack**
RCA Pin
Jack**
10kΩ
600Ω
Lines
-20 dBu
(77.5 mV)
0 dBu
+20 dBu Phone
(0.775 V) (7.75 V) Jack**
10kΩ
600Ω
Lines
-20 dBu
(77.5 mV)
0 dBu
+20 dBu Phone
(0.775 V) (7.75 V) Jack**
10kΩ
50600Ω
Mics
-66 dBu
(0.389
mV)
-50 dBu -30 dBu XLR-3-31
(2.45
(24.5
type*
mV)
mV)
Output Level
Nominal
Max.
before clip
600Ω Lines +4 dBu
+24 dBu
(1.23 V)
(12.3 V)
3mW
XLR3-32
type*
*** Phone jacks are impedance balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
DIMENSIONS
MGP32X
MGP24X
unit : mm
CD-S300RK, CD-C600RK
Compact Disc Player
CD-S300RK
Compact Disc Changer
CD-C600RK
Feature-packed CD players that Deliver Stunning Sound
High Sound Quality
• Pure Direct
• Extremely sophisticated circuitry and layout
• Short signal paths
• High performance DAC for high conversion precision with low noise
• Laser pickup floating mechanism
• Intelligent Digital Servo
Advanced Features
• USB port on front panel for iPod and other devices
• iPod compatibility
• CD-R/RW disc playback compatibility
• MP3 and WMA compatibility
• Numerous convenient playback functions
• RS-232C interface and IR in/out for installation (CD-C600RK only)
56
57
CD-S300RK, CD-C600RK
Pure Direct
The CD-S300RK and CD-C600RK offer the same Pure Direct feature popular in Yamaha amplifiers and receivers. Pure Direct is a special listening
mode which ensures the highest quality analog audio output. Pure Direct shuts down the digital audio output with the press of a button on
the front panel or the remote control, and turns off the display, thus achieving the lowest possible noise interference.
USB port on front panel for iPod and other devices
The USB port facilitates high quality sound playback from MP3 or WMA digital music files stored on USB players and memory devices, on
memory cards connected to USB card readers, and, of course, on CD-R/RW discs. An iPod, too, connects to the USB port via USB cable for
instant playback through an audio system. The digital signal is generated by the CD player with no degradation or jitter, converted to analog
by the high performance DAC, and transmitted to the amplifier via high quality audio circuitry, for the ultimate in music playback fidelity. Play,
pause, skip and forward/backward using the remote control. Song, artist and album names are displayed. Compatible with the iPod classic
(including the 120GB classic), iPod nano (2nd, 3rd, 4th generation) and iPod touch (1st and 2nd generation). Charges the iPod automatically when the power is
on and USB mode selected.
PlayXchange(CD-C600RK only)
With the PlayXchange, change CDs while the current one is playing. Changing discs does not interrupt the music and more than one disc can
be changed at a time.
Model
CD-S300RK
CD-C600RK
Frequency Response (±0.5 dB)
Harmonic Distortion+Noise
Signal-to-Noise Ratio
Dynamic range
Output Level (1kHz, 0dB)
Weight
20Hz-20kHz
≤0.003%
≥105dB
≥96 dB
2±0.3V
480 x 86.5 x 260mm (18.9" x 3-3/8" x 10-1/4")
4.2kg (9.3lbs)
480 x116 x 405mm (18.9" x 4-5/8" x 16")
6.9kg (15.2lbs)
DIMENSIONS
unit : mm
CD-C600RK
437
3
3
CD-S300RK Rear Panel
397.1
16
435
480
466.4
CD-C600RK Rear Panel
3.4
70.5
76.2 5.9
465
44.5 5.9
435
480
4.1
251.7
4.4
437
4.5
CD-S300RK
100
16
U-brackets
58
U-brackets for Installation series
UB series brackets support horizontal mounting on walls or ceilings. Speakers
can be tilted in the vertical axis only. Available in black and white finish.
UB2208
UB2108
U-Brackets
UB2205
U-Brackets
UB2115
U-Brackets
UB2112
U-Brackets
U-Brackets
Weight:
9kg (19.8lbs)
Weight:
4kg(8.8lbs)
Heavy duty U-brackets with TV spigot for Installation series
VUB series BGVC1 approved brackets support mounting on walls or ceilings.
Mounting with TV spigot allows speakers to be tilted horizontally and vertically.
Available in black finish.
HUB2205
horizontal U-Bracket
VUB2108
vertical U-Bracket
VUB2208
vertical U-Bracket
VUB2112
vertical U-Bracket
VUB2115
vertical U-Bracket
U-brackets for DXR series
UB series brackets support horizontal and vertical mounting on walls or ceilings.
Speakers can be tilted in one axis only. Available in black finish.
UB-DXR8
UB-DXR10
UB-DXR12
UB-DXR15
U-barcket
U-barcket
U-barcket
U-barcket
Ceiling brackets
59
BCS251
Ceiling-Brackets, load capacity 30kg
IF2208
IF2108
IF2205
C112VA
Stagepas
BCS20-150/210
Ceiling Bracket, load capacity 10kg
MS101iii
Wall mount brackets
BWS251-300/400
Wall-Brackets, load capacity 30kg
IF2208
IF2108
IF2205
C112VA
Stagepas
WM2008
Wall-Brackets for IF2108, IF2208
BWS50-120
Wall Bracket, load capacity 20kg
IF2208
IF2108
IF2205
C112VA
Stagepas
BWS50-190
Wall Bracket, load capacity 20kg
IF2208
IF2108
IF2205
C112VA
Stagepas
BWS20-120/190
Wall Brackets, load capacity 7kg
MS101iii
WM2205
Wall-Bracket for IF2205
Miscellaneous brackets
60
BBS251
Baton-Brackets, load capacity 30kg
IF2208
IF2108
IF2205
C112VA
Stagepas
BAS10
Free-Angle Clamp
Stagepas (mixer)
BMS-10A
Mic Stand Adaptor
Stagepas (mixer)
Array frames
HAF3-2115
Weight:
10kg (22lbs)
*available for IF2115 and IF2115M
HAF3-2112
Weight:
9kg (19.8lbs)
HAF2-2115
VAF2-2115
Weight:
5kg (11lbs)
Weight:
5kg (11lbs)
HAF2-2112
VAF2-2112
Weight:
4kg (8.8lbs)
Weight:
4kg (8.8lbs)
MTX Editor
61
Fast and easy set up of your audio system with a single software application
M
TX Editor allows you to design sound systems for small to mid-size installations built around MTX Series processors.
With a workflow that closely emulates the actual physical configuration of an installation application, MTX Editor's
wizard guides you through a simple yet thorough step process. What's more, in addition to the MTX Series, MTX Editor lets
you incorporate EXi8 and EXo8 expanders, DCP Series digital control panels, and even XMV Series power amplifiers into
your system and adjust parameter settings accordingly. With MTX Editor, you can design, configure and manage a complete
installation audio system from microphones right through to speakers—with a single program.
The workflow of MTX Editor
Device Configuration
Input Processing settings
By simply following the instructions of the MTX Editor wizard, you can
easily configure a complete sound system comprised of MTX Series
matrix processors as well as XMV Series power amplifiers, DCP Series
digital control panels or EXi8/ EXo8 expanders.
By selecting GAIN/HPF/EQ you can adjust 3-Band PEQ settings for
each input channel, as well as each microphone channels' HPF.
GATE/COMP sets Gate and Compressor parameters and FBS/AGC
features feedback suppressors that eliminate acoustic feedback,
as well as the Auto Gain Control function that maintains a constant
output level with input signals that vary in level.
MTX Series parameter settings
Once your system is configured you can set the parameters for
the MTX Series. The Main window gives you an overview of each
channel's settings and the Channel Edit window lets you adjust each
of the selected channel's parameters in detail.
MTX Editor
62
The workflow of MTX Editor
Matrix/Priority Processing settings
External controller settings
In the matrix mixer, the input channels and output buses are arranged
in a checkerboard configuration. You can adjust the group balance
for each output bus, or use the faders to adjust the signal from all
input channels to a specific matrix bus when Sends On Faders mode
is enabled.
MTX Editor can also be used to configure the settings of external
controllers. MTX processing functions can be easily assigned to the
switches and knobs of DCP Series wall-mounted controllers or to the
dedicated iPhone/ iPod touch software application.
The signal from the matrix mixer is sent to 8 units of Priority
Processor. Here, you can make detailed adjustments to the parameter
settings of the Ducker function as well the Ambient Noise
Compensator.
Output Processing settings
After Priority Processor settings have been applied, signals are
sent to output channels through the Router. Each output channel
is equipped with a 4 Band PEQ, Delay and Speaker Processor. The
Speaker Processor has stored presets for a range of Yamaha speakers
allowing you to easily select the optimum settings for the speakers in
your system. Settings for 4-Band PEQ and Delay can also be adjusted
to match the audio output with the acoustic characteristics of various
installation environments.
YS3 Yamaha Sound System Simulator
This acoustic simulation software combines the essential elements of Yamaha Professional Audio acoustic technology for
all sound handled from input to output, including DSP, amps, speakers, and even the venue’s design. The software provides
superb accuracy and reliability thanks to the knowledge and experience of the Sound & IT Development Division, which is at
the forefront of the world’s acoustic technology with its Active Field Control and Acoustic Modeling, and has employed its
advanced technology in the acoustic design of many concert halls.
V3.0.2 Features
• Hall shapes of multi-floor venues (up to four floors) can now be created. Calculation results can be displayed separately for each floor or for
all floors at once.
• Hall shapes can now be re-edited.
• Delay, PEQ, and speaker processor settings can now be saved separately in DME Designer library file format (*.cel).
and more..
Simulating your system in a few simple steps
With sophisticated graphic user interface and user-friendly settings wizard,
simulation can be performed precisely and easily. You can easily set and
change the venue shape, conditions, and other aspects with the wizard,
and make graphical visualizations of sound pressure level distribution at
receiving points, frequency characteristics graphs, and contour figures. Plus
it provides auralization, which lets you hear the sound with your ears using
any sound source for even better monitoring.
63
64
YS3 Yamaha Sound System Simulator
Auto Layout and Tuning
Convenient features such as the auto layout of speaker arrays and auto setting of speaker
parameters are included to conduct the important tasks of speaker selection, positioning,
and setting of speaker array.
Distributed Speakers
By using the distributed mode, you can arrange the
speakers with a fixed spacing on a level surface. Just
simply select speakers and plane types, and enter
the appropriate settings. The speaker layout pattern
can be chosen from “Coverage”, which automatically
calculates positioning based on the coverage area
of the receiving surface, or “Grid”, which places
speakers on a plane surface at any interval you wish.
Exporting configurations in DME Designer format
Y-S³ can automatically generate an output system configuration for all placed
speaker arrays and save them in DME Designer Project format. Exporting
data can be chosen from Project File (.daf) format, Device Configuration
(.ddf) format, and Library File (.cel) format. You can put the simulation result
to use in your actual system setup quickly and with little effort.
System Requirements
OS
Windows 7 (32bit, 64bit)
CPU
Core 2 Duo (2 G Hz or higher)
Memory
2GB or higher
Sound Card
16-bit 44.1kHz Stereo
HDD
2GB or more (may differ according to the environment the software is used)
Display
1024 x 768, 256 colors, 96 dpi (Normal)
Video card: DirectX 9.0C supported, memory size 256MB or more
Windows® XP Professional
Service & Support
PRODUCTS & SPAREPARTS ORDERING
YAMAHA Extranet
www.yamaha-extranet.com
login:______________
password:______________
INFORMATION & DOWNLOADS
software & firmware:
http://www.yamahaproaudio.com/global/en/downloads/firmware_
software/
Yamaha data sheets:
http://www.yamahaproaudio.com/global/en/downloads/datasheet/
Yamaha users manuals:
Yamaha CAD library:
http://www.yamahaproaudio.com/global/en/downloads/cad_library/
EASE/ULYSSES/CLF speaker data:
http://www.yamahaproaudio.com/global/en/downloads/systemdesign/
speaker_processor_settings/
Yamaha photos:
http://www.yamahaproaudio.com/global/en/downloads/photo_library/
Yamaha system examples:
WORKproCA users manuals:
WORKproCA EASE data:
http://www.yamahaproaudio.com/global/en/downloads/manuals/
http://www.yamahaproaudio.com/global/en/resources/
http://www.workproca.com/user_manuals.php
http://www.workproca.com/ease.php
65
66
CONTACT INFORMATION
Your contact
Name: _________________
Email: _________________
Tel:
_________________
UK
Central Europe
United Kingdom, Ireland
Germany, Austria, Switzerland, The Netherlands,
Belgium, Luxemburg, Poland, Czech Republic,
Hungary, Slovenia, Slovakia, Romania, Bulgaria,
Lithuania, Latvia, Estonia
Yamaha Music Europe GmbH (UK)
Sherbourne Drive, Tilbrook,
Milton Keynes, MK7 8BL,
United Kingdom
+44 1908 366700
Yamaha Music Europe GmbH
Siemensstrasse 22-34,
25462 Rellingen,
Germany
+49 4101 3030
France
Italy
Yamaha Music Europe
7 rue Ambroise Croizat,
Zone d’activités Pariest,
77183 Croissy-Beaubourg,
France
+33 164 614 000
Yamaha Music Europe GmbH, Branch Italy
Viale Italia 88,
20020 Lainate (Milano),
Italy
+39 2 93577 1
Iberica
Scandinavia
Spain, Portugal
Sweden, Denmark, Norway, Finland
Yamaha Music Europe GmbH Ibérica,
Sucursal en España
Ctra.de la Coruna Km. 17,200,
28231 Las Rozas (Madrid),
Spain
+34 91639 8888
Yamaha Music Europe GmbH Germany
filial Scandinavia
JA Wettergrensgata 1,
421 30 Västra Frölunda,
Sweden
+46 31 89 34 00
Disclaimer.
All information presented in this document is subject to change without notice.

Product Data Sheets - Leopold Polt Gastro

Transcription

Similar documents

Data Sheet (MG166CX, MG124CX, MG82CX)

CFHK-FM Application - Corus Entertainment