ASSEMBLY INSTRUCTIONS FOR INSTRUCTION ONLY

JENNY
ORBELLE’S ORIGINAL DESIGN
SEE MORE PRODUCTS AT:
WWW.ORBELLE.COM
FOR INSTRUCTION ONLY
MANUFACTURE DATE: JUNE 2009
ASSEMBLY INSTRUCTIONS
Read all instructions before
assembling crib.
Save instructions for future use.
Carefully remove and lay out all parts.
Familiarize yourself with all diagrams to
facilitate the assembly of your crib.
Check parts and the enclosed hardware bag
with the hardware parts list to be sure all
are included and quantities are correct.
Destroy cardboard and plastic bags
immediately.
1
Attention: In order to properly assemble
the crib, follow the assembly instructions
in the specified order.
Failure to assemble the crib in the manner
recommended could make the crib hazardous.
Warning:Never use this product if there are any
loose or missing fasteners, loose joints,broken
parts, or torn mesh/fabric. check before
assembly and periodically during use. Contact
ORBELLE. for replacement parts and
instructional literature if needed.
MADE IN CHINA
WARNING
.Failure to follow these warnings and the instructions could result in serious injury
or death.
.Read all instructions before assembling crib,keep instructions for futher use.
.Upon completion of assembly be sure all screws, bolts and fastening devices have
been securely tightened.A frequent check should be made.
.Never use this product if there are any loose or missing fasteners, loose joints,broken
parts, or torn mesh/fabric. check before assembly and periodically during use.
Contact ORBELLE for replacement parts and instructional literature if needed.
.Never substitute parts, the product including side rails, must be fully erected
prior to use.
.Discontinue use of the product when child is able to climb out or reaches the height
of 35in.(900mm).
.Never place product near window where cords from blinds or drapes can strangle
a child.
.When child is able to pull to standing position,set mattress/base to lowest adjustment
position and remove bumper pads, large toys ,and other objects that could serve as
steps for climbing out.
.Never use plastic shipping bag or other plastic film as mattress covers not sold and
intended for that purpose, they can cause suffocation.
.CATION: Any mattress used in this crib must be at least 27-1/4inches(690mm) by
51-5/8 inches(1310mm),with a thickness not exceeding 6 inches(150mm), the
dimensions of the mattress shall be taken from seam to seam or edge to edge where
appropriate.
.Never use a watter mattress with this product.
.Strings can cause strangulation! Never place items with a string around a child’s
neck,such as hood strings or pacifier cords. Never suspend strings over product or
attach strings to toys.
.Infants can suffocate in gaps between a mattress too small or too thick and product
sides ,on soft bedding never add a mattress, pillow,comforter,or padding.
.To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on
their back to sleep, unless otherwise advised by your physician.
.If refinishing,use a non-toxic finish specified for children’s products.
MADE IN CHINA
2
PARTS LIST FOR #JENNY
C: Front rail (1PC)
D: Back rail (1PC)
A
B
A: Left head board (1PC)
B: Right head board (1PC)
E: Stabilizer bar (1PC)
F: Mattress support (1PC)
a: 3” Allen head bolt (10 pcs)
d: 2” Allen head bolt (4 pcs)
G: Guard rail (1PC)
b: Barrel nuts (10 pcs)
e: 3/4” Allen head bolt (4 pcs)
3
c: 2” Allen wrench (1 pc)
f: Castors (2 pcs)
g: Castors (2 pcs)
a
STEP 1
Connect back rail ( D) to the
headboard ( A & B) by screws (a) and nuts (b),
then attach the stabilizer bar (E) to the
headboard ( A & B) by screws (a)
and nuts (b).
a
c
b
B
D
b
E
b
A
a
a
bb
STEP 2
Locate the mattress support (F) with tabs.
Be sure the smooth side of the
mattress support(F) is paced upward.
Position the tabs of the mattress
support(F) to mount to the
selected position onto the legs.
insert the bolts(e),through the
tabs and into thread insets,
then tighten securely with
allen wrench(c).
D
A
B
e
F
e
e
4
STEP 3
Connect front rail (C) to the
headboard ( A & B) by screws (a) and nuts (b).
a
B
b
D
A
a
C
b
c
b
a
a
bb
b
STEP 4
Assemble casters (f & g) to the leg bottoms
on the leg on headboard (A & B),
2 casters (g) with brake are in
the front.
B
D
A
C
g
f
g
5
Converting crib to a toddler bed
You have the option to convert crib to a toddler bed
1:Remove the casters (f );
2:Remove the front rail (C) ;
3:Assemble the guard rail (G) to
the headboard (A&B) by screws(d)
and allen wrench(c).
B
D
d
A
F
G
d
Converting crib to a day bed
You have the option to convert crib to a day bed
1:Remove the casters (f );
2:Remove the front rail (C) .
A
6
B
D
F
ORBELLE TRADE INC.
347 CLINTON STREET
HEMPSTEAD NY 11550
TEL:516-481-1500
[email protected]
WARRANTY
.ORBELLE wants you to be satisfied with any product that bears the ORBELLE name.
therefore, will supply promptly and without charge any missing part, provided that the
description of the missing parts is reported within 10 days of the purchase of the
product. ORBELLE will replace any defective part free of charge during the warranty
period which begins on the date of purchase and extends for 45 days, provided that
the defect is not the result of customer abuse or misuse.
MISSING PARTS
.In the unlikely event that your product has a part missing, please return your warranty
to ORBELLE along with a sales slip and a description of the missing part. the part will
be sent out immediately for faster service call.
DEFECTIVE PARTS
.Defective parts will befixed or replaced without charge provided that proof of
purchase is provided and that the warranty is in effect. if you have a problem, please
do the following.
. Write to ORBELLE or E-mai ([email protected]) with a description of the defective
part, give your name,address, telephone number,date of purchase, also copy the order
number and model number located on the mattress board or carton box .ORBELLE
will send the new part to you.
CUSTOMER ABUSE AND MISUSE
.In the event that ORBELLE determines that the defect was the result of customer
abuse or misuse, we will contact you with the cost of parts and service.
REPLACEMENT PARTS FOR ORBELLE PRODUCT OUT OF WARRANTY
.Write to us for a parts list
CARE AND CLEANING
.Wipe with a damp cloth or clean with liquid detergent, wipe dry with clean cloth.
.From time to time inspect all screws of the crib to be secure tight..
WARRANTY
.To ensure that your product can be promptly serviced, please fill out this warranty and
return it to ORBELLE as soon as you unpack the product. (include sales slip or copy).
Name
Date Purchase
Address
City/State
Model # JENNY Date
Zip Code
Purchased at
Address