Langley Crib (Display)

DOREL ASIA
Model No:
DA5673DR (Walnut)
Langley Crib (Display)
Display No:
MD3986
DPCI#:
004-05-1018
Fixture Barcode:
490040510186
Contact Customer
Service HELP!
with
NEED
questions.
CALL US FOR ASS
1-800-295-1980
Tel
#: 1-800-295-1980
DO
NOT RETURN
E-Mail: [email protected]
E-MAIL:DAS@DO
Langley Crib (Display)
DA5673DR / MD3986
Langley Crib (Display)
DA5673DR / MD3986
STEP 1:
Insert the wood dowels (1) into the back panel (C).
Attach the left and right posts (A & B) to the back panel (C) with hex socket head
bolts (2) as shown.
Use Allen key (4) to tighten the bolts.
Langley Crib (Display)
DA5673DR / MD3986
STEP 2:
Insert wood dowels (1) into the left side panel (D).
Attach the left side panel (D) to the left post (A) with hex socket head bolts (2) as
shown.
Use Allen key (4) to tighten the bolts.
Repeat this step to attach the right side panel (E) to right post (B) as shown.
Langley Crib (Display)
DA5673DR / MD3986
STEP 3:
Attach the mattress support (H) to the left and right side panels (D & E) and the posts
(A & B) with mattress support bolts (3) and spring washers (5). Use Allen key (4) to
tighten the bolts.
INCORRECTRaised edge
should face
down -this
photo shows
mattress
support is
upside down.
INCORRECTTabs on corners
of mattress
support should
point up.
CORRECT
* Tabs to point UP.
* Flat surface of mattress support to
face up - mattress must sit on flat.
Langley Crib (Display)
DA5673DR / MD3986
STEP 4:
Attach the guard rail (G) to the front panel (F) with wood dowels (1) as shown.
Note: The curved edge of guardrail (G) must face towards the ground.
Langley Crib (Display)
DA5673DR / MD3986
STEP 5:
Attach the assembled front panel (done in step 4) to left and right side panels (D & E)
with wood dowels (1) and hex socket head bolts (2) as shown.
Use Allen key (4) to tighten the bolts.
Dorel Asia is an authorized licensee of Eddie Bauer Licensing Services LLC. Eddie Bauer® and the Eddie
Bauer logos are the registered trademarks of Eddie Bauer Licensing Services LLC.