Publikationen - Institut für Gesteinshüttenkunde der RWTH

Transcription

Publikationen - Institut für Gesteinshüttenkunde der RWTH
Publikationen
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
Richter, J.; Gasseling, U.; Conradt, R.:
Transport numbers and ionic mobilities in nitrate melts by e.m.f. measurements on concentration cells with
transference.
In: Electrochim. Acta 23 (1978) 23, S. 1165–72.
Richter, J.; Conradt, R.; Becker R.:
Activity coefficients and excess molar Gibbs functions of liquid alkali halide + silver halide mixtures at varying
temperature and composition.
In: Zeitschrift für Naturforschung 36 (1981) a, S. 1100–05.
Conradt, R.; Engelke, H.; Kaiser A.:
Investigations of the solution behavior of NaCl in the quinary system NaCl-KCl-MgCl2-MgSO4-H2O at
different temperatures.
In: Mat. Res. Soc. Symp. Proc. (1982) 11, S. 487–90.
Scholze, H.; Conradt, R.; Roggendorf, H.:
Determination of the corrosion mechanisms of high-level waste containing glass.
In: Mat. Res. Soc. Symp. Proc. (1982) 11, S. 173–80.
Conradt, R.; Richter, J.; Wettich, H.:
Fused salt concentration cells with transference, transport numbers of molten alkali chloride and silver
chlorides mixtures.
In: Zeitschrift für Naturforschung (1983) 384, S. 128–34.
Conradt, R.; Scholze, H.; Waldecker, G.:
Evaporation studies on binary and ternary systems - their relevance to the practical glass melt.
In: Glastechnische Berichte 56K (1983), S. 132–37.
Scholze, H.; Tuenker, G.; Conradt, R.:
Volatilization of fluorine from molten glasses and during the melting process.
In: Glastechnische Berichte 56 (1983), S. 131–37.
Conradt, R.; Roggendorf, H.; Scholze, H.:
Chemical durability of a multicomponent glass in a simulated carnallite/rock salt environment.
In: Mat. Res. Soc. Symp. Proc. (1984) 26, S. 9–15.
Conradt, R.; Scholze, H.:
Corrosion of glass in aqueous solutions - a still unsolved problem?
In: Rev. Staz. Sper. Vetro (1984) 5, S. 73–77.
Conradt, R.; Roggendorf, H.; Scholze, H.:
A contribution to the modelling of the corrosion mechanisms of HLW glasses.
In: Mat. Res. Soc. Symp. Proc. (1985) 44, S. 155–62.
Conradt, R.; Roggendorf, H.; Scholze, H.:
Investigation on the role of surface layers in HLW glass leaching.
In: Mat. Res. Soc. Symp. Proc. (1985) 50, S. 203–10.
Conradt, R.; Roggendorf, H.; Ostertag R.:
The basic corrosion mechanisms of HLW glasses. Report EUR 10680 EN. Commission of the European
Communities, 1986.
Conradt, R.; Scholze, H.:
On volatilization from glass melts.
In: Glastechnische Berichte 59 (1986), S. 34–52.
Kappel, J.; Conradt, R.; Scholze, H.:
Foaming behavior on glass melts.
In: Glastechnische Berichte 60 (1987), S. 189–201.
Scholze, H.; Conradt, R.:
In-vitro study on siliceous fibres.
In: The annals of occupational hygiene 31 (1987) 4b, S. 683–92.
Conradt, R.:
Effect of minor batch additions on the rate of batch melting.
In: Proc. XVIII Intern. Congr. on Glass 10 (1989) A3, S. 16–21.
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[30]
[31]
[32]
[33]
[34]
[35]
Conradt, R.; Pimkhaokham, P.:
A closer look to local raw material for potential use in glass industry.
In: Proc. 3 Mineral Resources Seminar, Pattaya (Thailand) (1989), S. 395–407.
Roggendorf, H.; Conradt, R.; Schmidt, H.:
Characterization of the surface of the HLW glass R7T7 reacted in salt brines.
In: Mat. Res. Soc. Symp. Proc. (1989) 127, S. 89–96.
Scholze, H.; Hurbanic, M.; Conradt, R.:
Comparative investigations on anhydrite-containing calcination products of natural and flue gas gypsum.
In: Zement-Kalk-Gips 42 42 (1989) 5, S. 249–51.
Conradt, R.; Pimkhaokham, P.:
An easy-to-apply method to estimate the heat demand for melting technical silicate glasses.
In: Glastechnische Berichte 63K (1990), S. 134–43.
Baumann, S.; Wilsmann, W.; Conradt, R.:
Calorimetic determination of the heat consumption of batch melting reactions.
In: Proceedings of the 5th Conference (1992) A2, S. 2–9.
Conradt, R.; Pimkhaokham, P.:
Potential use of basalts from Thailand in mineral fibre Production.
In: Met. Mat. Min. Bull. 3 (1992) 2, S. 71–85.
Sebastian, K.; Tiesler, H.; Conradt, R.; Roggendorf, H.; Schmid, B.:
Corrosion of fibrous silicates in electrolyte solutions.
In: Proc. XVI Intern. Congr. Glass (1992) 4, S. 93–98.
Pimkhaokham, P.; Conradt, R.:
Study on the processes controlling the rate of glass batch melting.
In: Rep. Asahi Glass Found (1993), S. 281–84.
Conradt, R.:
A thermodynamic approach to viscosity in the glass transition.
In: Glastechn. Ber. Glass Sci. Technol. 67 (1994), S. 304–11.
Conradt, R.:
Analysis methods and solution strategies for energy utilization problems in glass industry.
In: Proceedings of the 5th ASEAN Conference on Energy Technology 1 (1994), S. 93–100.
Conradt, R.; Suwannathada, P.; Pimkhaokham, P.:
Local temperature distribution and primary melt formation in a melting batch heap.
In: Glastechnische Berichte 67 (1994), S. 103–13.
Conradt, R.:
A thermodynamic approach to multicomponent oxide glasses.
In: Glastechn. Ber. Glass Sci. Technol. 68 (1995) C1, S. 43–50.
Pimkhaokham, P.; Eiumnoh, C.; Kham, S.; Conradt, R.:
Study on the local and temporal distribution of temperature, oxygen activity, and liquid phase formation in a
melting glass batch blanket.
In: Rep. Asahi Glass Found. (1995), S. 743–47.
Conradt, R.; Geasee, P.:
An improved thermodynamic approach to the stability of multicomponent silicate glasses in aqueous
solutions.
In: Berichte der Bunsengesellschaft für physikalische Chemie 100 (1996) 9, S. 1408–10.
Conradt, R.:
A simplified procedure to estimate thermodynamic activities in multicomponent oxide melts.
In: Proc. 5th Intern. Conf. Molten Salt Chemistry and Technology (1997).
Conradt, R.:
A thermodynamic approach to the structure of oxide glasses.
In: Glastechn. Ber. Glass Sci. Technol. (1997), S. 15–22.
Conradt, R.:
Vorgänge beim Einschmelzen von Gemenge.
In: Fachausschuß III der DGG, Würzburg (1997).
Conradt, R.; Kham, S.; Eiumnoh, C.; Pimkhaokham, P.:
Melting behavior of batches containing ground cullets.
In: Fundamentals of Glass Science and Technology (1997), S. 290–96.
Conradt, R.:
Local vs. overall reaction progress in corrosion experiments on size-distributed glass particles.
In: Proc. XVIII Intern. Congr. on Glass (1998) 10, S. 33–38.
[36]
[37]
[38]
[39]
[40]
[41]
[42]
[43]
[44]
[45]
[46]
[47]
[48]
[49]
[50]
[51]
[52]
[53]
[54]
Conradt, R.:
Melting Kinetics of Raw Material Batches for Glass Melting.
In: HVG/NCNG Colloquium, Aachen (1998), S. 12–18.
Conradt, R.; Pimkhaokham, P.; Leela-Adisorn, U.:
Nanostructured silica from rice husk.
In: J. Non-Cryst. Solids 145 (1998), S. 75–79.
Conradt, R.; Wilsmann, W.:
Theoretische und experimentelle Bestimmung des Wärmebedarfs der Gemengeschmelze.
In: 72. Glastechnische Tagung (1998), S. 180–85.
Dahlmann, U.; Reschke, D.; Conradt, R.:
Recycling of conventional mirror culletes.
In: Proc. XVIII Intern. Congr. on Glass 10 (1998) B8, S. 17–22.
Glüsing, A.-K.; Conradt, R.; Telle, R.:
"Refraktärpathologie" - Untersuchungen an Feuerfestmaterial nach der Wannenreise.
In: 72. Glastechnische Tagung (1998), S. 143–47.
Glüsing, A.-K.; Conradt, R.; Telle, R.:
"Refraktärpathologie" - Untersuchungen an Feuerfestmaterial nach der Wannenreise.
In: 72. Glastechnische Tagung (1998), S. 143–47.
Manz, S.; Buchmayer, J.; Glüsing, A.-K.; Conradt, R.:
Scherbengüte beim Recycling - KSP-Problematik in der Hohlglasindustrie.
In: 72. Glastechnische Tagung (1998), S. 159–62.
Manz, S.; Buchmayer, J.; Glüsing, A.-K.; Conradt, R.:
Scherbengüte beim Recycling -KSP-Problematik in der Hohlglasindustrie.
In: 72. Glastechnische Tagung (1998), S. 159–67.
Boccaccini, A.; Conradt, R.; Olevsky, E.:
Anisotropy Effects during sintering of Particle reinforced Glasses.
In: Proceedings of the 5th Conference (1999) C3, S. 50–57.
Conradt, R.:
Predictive modeling of glass corrosion.
In: Proceedings of the 5th ESG Conference (1999) B1, S. 2–10.
Conradt, R.:
Thermochemical methods in glass technology.
In: Conference on glass and ceramics. Proc 1 (1999), S. 1–8.
Conradt, R.:
Thermochemistry and structure of oxide glasses.
In: Analysis of the composition and structure of glass and glass ceramics, Springer Verlag (1999), S. 232–54.
Conradt, R.:
Thermodynamics of glass corrosion.
In: Analysis of the composition and structure of glass and glass ceramics, Springer Verlag (1999), S. 435–46.
Daichendt, D.-M.; Glüsing, A.-K.; Hufen, D.; Conradt, R.:
Wärmetechnisches Verhalten einer Glaswanne anhand routinemäßig erfaßter Betriebsdaten.
In: 73. Glastechnische Tagung, Halle (1999), S. 103–05.
Glüsing, A.-K.; Conradt, R.:
Alternative uses of recycled cullet - problematical impurities and alternative forming.
In: Proceedings of the 5th Conference (1999) A6, S. 31–37.
Glüsing, A.-K.; Conradt, R.:
Post mortem studies on refractories of a glass furnace.
In: Proc. Of the 5th ESG Conf. (1999) A4, S. 48–53.
Groß, S.-M.; Dahlmann, U.; Conradt, R.:
Dissolution behaviour of glasses from the system CaO-(Mg,Fe)O-Al2O3-SiO2 in aqueous solutions.
In: Proceedings of the 5th ESG Conference (1999) B1, S. 65–72.
Krzoska, J.; Sam Kham, N.; Conradt, R.:
Bestimmung der lokalen Temperaturleitfähigkeit in aufschmelzendem Gemenge.
In: 73. Glastechnische Tagung, Halle (1999), S. 214–17.
Pongkao, D.; Lorprayoon, C.; Conradt, R.:
Dissolution/precipitation behavior of hydroxyapatites prepared from cattle bone ash.
In: Bioceramics 12 (1999), S. 357–60.
[55]
[56]
[57]
[58]
[59]
[60]
[61]
[62]
[63]
[64]
[65]
[66]
[67]
[68]
[69]
[70]
[71]
[72]
Sam Kham, N.; Conradt, R.:
Einfluß der Primärschmelzenbildung auf die Kohle-Sulfat-Reaktion im Gemenge.
In: 73. Glastechnische Tagung, Halle (1999), S. 228–31.
Sam Kham, N.; Conradt, R.:
On batch melting.
In: Proceedings of the 5th Conference (1999) A1, S. 57–62.
Conradt, R.:
A quantitative approach to the properties of geological and industrial glass forming systems.
In: Applied Mineralogy (2000).
Conradt, R.:
Predictive modeling of glass corrosion.
In: Proceedings of the 5th ESG Conference (2000) 50, S. 297–301.
Conradt, R.:
Some fundamental Aspects of the Relation between Pull Rate and Energy Consuption of Glass Furnaces.
In: International Glass Journal 108 108 (2000), S. 22–26.
Boccaccini, A.; Conradt, R.:
Isotropic shrinkage of platelet containing glass powder compacts during isothermal sintering.
In: Int. J. Inorganic Materials 3 (2001), S. 101–06.
Conradt, R.:
A proposition for an improved theoretical treatment of the corrosion of multi-component glasses.
In: Journal of Nuclear Materials 298 (2001), S. 19–26.
Conradt, R.:
Modeling of the Thermochemical Properties of Multicomponent Oxide Melts.
In: Zeitschrift Metallkunde 92 (2001) 10, S. 1158–62.
Conradt, R.:
Steigerung von Leistung und Prozesssicherheit bei der Schmelze von Gemengen mit und ohne Scherben.
In: Fachausschuss III der DGG 1988 (2001).
Conradt, R.:
Thermodynamics - a key to glass science and technology.
In: Glastechn. Ber. Glass Sci. Technol. 74 (2001) C.
Conradt, R.; Groß, S.-M.; Dahlmann, U.:
Ansätze zur Erweiterung eines computergestützten Berechnungsmodells für die Glaskorrosion.
In: Glastechnische Tagung Wernigerode 75 (2001) 315.
Glüsing, A.-K.; Conradt, R.:
Quantification of corrosive conditions in the superstructure of glass melting furnaces. Zeitschrift Special Stahl
und Eisen.
In: 44th Int. Colloquium on Refractories (2001), S. 27–29.
Conradt, R.:
Thermodynamic aspects of the behavior of polyvalent ions in glass melts.
In: Glastechnische Berichte 75 (2002) C2, S. 269–74.
Conradt, R.:
Wärmebilanz beim Glasschmelzprozess.
In: Wärmetransportprozesse bei der Herstellung und Formgebung von Glas. Fortbildungskurs 2002.
Hüttentechnische Vereinigung der Deutschen Glasindustrie. Verlag der Deutschen Glastechnischen
Gesellschaft (2002).
Conradt, R.; Groß, S.-M.; Dahlmann, U.:
Dissolution behaviour of glasses in aqueous solutions containing organic components. Proc. XIX Int. Congr.
Glass, Edinburgh, 1-6 July 2001.
In: Glass Technol. (2002) 43C, S. 93–96.
Glüsing, A.-K.; Conradt, R.:
Melting behavior of recycled cullet: effects of impurity dissolution, pulverisation and solution pre-treatment.
In: Proc. 6th ESG Conference "2002 Glass Odyssey" Montpellier 9 (2002) 1, S. 42–46.
Liu, X.; Müller, P.; Dronskowski, R.; Wilsmann, W.; Conradt, R.:
Experimental and Quantum-Chemical Studies on the Thermochemical Stabilities of Mercury Carbodiimide
and Mercury Cyanamide.
In: Chemphyschem 4 (2003), S. 725–31.
Schwickert, T.; Reisgen, U.; Geasee, P.; Conradt, R.:
Electrically Insulating High-Temperature Joints for Ferritic Chromium Steel.
In: J. of Advanced Materials 35 35 (2003) 4, S. 44–47.
[73]
[74]
[75]
[76]
[77]
[78]
[79]
[80]
[81]
[82]
[83]
[84]
[85]
[86]
[87]
[88]
[89]
[90]
Conradt, R.:
Chemical structure, medium range order, and crystalline reference state of multicomponent oxide liquids and
glasses.
In: J. Non-Cryst. Solids 345, 346 (2004), S. 16–23.
Conradt, R.:
The Glass Melting Process-treated as a cyclic process of an imperfect heat exchanger.
In: Ceramic Transactions, American Ceramic Society 141 (2004), S. 35–44.
Conradt, R.; Dubois, O.:
Experimental Study on the effect of cullet and batch water content on the melting behaviour of flint and
amber container glass batches.
In: Glass Sci. Technol. 77 (2004) 3, S. 137–48.
Conradt, R.; Glüsing, A.-K.:
Observation and analysis of dissolution kinetics, supported by microscopy.
In: Ceramic Transactions, American Ceramic Society 141 (2004), S. 107–15.
Conradt, R.:
Harmonization of viscosimetric and thermodynamic data for industrial multi-component glasses and glass
melts.
In: Ceramic Transactions, American Ceramic Society 170 (2005), S. 103–16.
Conradt, R.; Overath, J.; Schaefer-Rolffs, W.; Hesselle, M. de:
Zur Darstellung des Energieverbrauches von Glasschmelzwannen.
In: DGG-Journal 4 (2005) 6, S. 6–9.
Shin, J.-W.; Wilsmann, W.; Conradt, R.:
Thermochemical and physical properties of glasses based on the system CaO-MgO-Al2O3-SiO2.
In: Phys. Chem. Glasses 46 (2005) 2.
Huckenbeck, U.; Conradt, R.:
Fast calculation of the thermodynamic properties of oxide glasses and glass melts up to 20 components.
In: Phys. Chem. Glasses (2007).
Stanglmaier, R.; Gross, T.; Moormann, G.; Verlotski, V.; Conradt, R.:
An innovative glass-metal coating to provide corrosion resistance and a thermal barrier for highly loaded
engine components.
In: CIMAC Congress (2007) 184.
Becker, E.; Prange, R.; Conradt, R.:
Simulation of the chemical influence to the polishing process of optical glasses.
In: Advanced Materials Research (2008) 39-40, S. 293–98.
Beerkens, R.; Conradt, R.:
Round robin test on liquidus temperature of soda-lime-magnesia-silica float glass samples.
In: Glass Tech. Eur. J. Glass Sci. Technol. A 49 (2008) 5, S. 205–12.
Conradt, R.:
Chemical Durability of Oxide Glasses in Aqueous Solutions: A Review.
In: Journal of the American Ceramic Society 91 (2008) 3, S. 728–35.
Conradt, R.:
Chemical Durability of Oxide Glasses in Aqueous Solutions: A Review.
In: Journal of the American Ceramic Society 91 (2008) 3, S. 728–35.
Conradt, R.:
The industrial glass melting process.
In: Woodhead Publishing in Materials 2nd Edition (2008) II.24, S. 282–303.
Djamhazov, P.; Prange, R.; Conradt, R.:
Glass surface analysis by an optimazed sequential chemical etching technique using the corrosive agent
HF/HNO3.
In: Advanced Materials Research (2008) 39-40, S. 351–54.
Neumann, A.; Wilsmann, W.; Conradt, R.:
Condensation during flue gas cleaning.
In: Advanced Materials Research 39-40 (2008), S. 647–52.
Durable sealing concepts with glass sealants or compression seals. In: Handbook of Fuel Cells: Advances in
Electocatalysis, Materials, Diagnostics and Durability, Volumes 5 & 6. W.
In: John Wiley & Sons Ltd (2009), S. 579–90.
Bretcanu, O.; Chatzistavrou, X.; Paraskevopoulos, K.; Conradt, R.; Thompson, I.; Boccaccini, A.:
Sintering and crystallisation of 45S5 Bioglass® powder.
In: J. European Ceramic Society 29 (2009) 16, S. 3299–306.
Conradt, R.:
Chemische Beständigkeit. In: Fortbildungskurs 2009, Physikalische und chemische Eigenschaften von Gläsern
und Glasschmelzen - Werkstoffdaten für die Praxis, Hüttentechnische Vereinigung der Deutschen
Glasindustrie.
In: Verlag der Deutschen Glastechnischen Gesellschaft (2009), S. 115–38.
[92] Conradt, R.:
Datenbanken für die Glastechnologie. In: Fortbildungskurs 2009, Physikalische und chemische Eigenschaften
von Gläsern und Glasschmelzen - Werkstoffdaten für die Praxis, Hüttentechnische Vereinigung der Deutschen
Glasindustrie.
In: Verlag der Deutschen Glastechnischen Gesellschaft (2009), S. 185–96.
[93] Conradt, R.:
On the entropy difference between the vitreous and the crystalline state.
In: J. Non-Cryst. Solids 355 (2009), S. 636–41.
[94] Conradt, R.:
Quantitative Thermochemistry of Glassy and Liquid Multi-Component Systems for Industrial Application.
In: Proceedings of the 10th Presentation of the Otto-Schott-Research-Award (2009), S. 137–50.
[95] Fotheringham, U.; Baltes, A.; Müller, R.; Conradt, R.:
The residual configurational entropy below the glass transition: Determination for two commercial optical
glasses.
In: J. Non-Cryst. Solids 355 (2009), S. 642–52.
[96] Wondraczek, L.; Conradt, R.:
Preface - Glass and entropy.
In: J. Non-Cryst. Solids 355 (2009) VII-VIII.
[97] Conradt, R.:
Thermodynamics of Glass Melting.
In: In: Fiberglass and Glass Technology - Energy-Friendly Compositions and Applications (2010), S. 385–412.
[98] Goel, A.; Tulyaganov, D.; Ferrari, A.; Shaaban, E.; Prange, A.; Bodioli, F.; Ferreira, J.:
Structure, Sintering, and Crystallization Kinetics of Alkaline-Earth Aluminosilicate Glass-Ceramic Sealants for
Solid Oxide Fuel Cells.
In: J. Am. Ceram. Soc 93 (2010) 3, S. 830–37.
[99] Kundin, J.; Yu, C.-J.; Emmerich, H.:
Simulation of adsorption processes on the glass surface in aqueous solutions containing oxalic acid.
In: Computational Materials Science 49 (2010), S. 88–98.
[100] Neumann, A.; Wilsmann, W.; Conradt, R.:
Equilibria and reactions within synthetic flue gases from the Na-H-C-O-S-N system.
In: Glass Technol.: Eur. J. Glass Sci. Technol. A 52 (2011) 1, S. 37–42.
[101] Theerapapvisetpong, A.; Jiemsirilers, S.; Thavorniti, P.; Conradt, R.:
Barium-free glass-ceramic sealants from the systems CaO-MgO-B2O3-Al2O3-SiO2 for application in the
SOFC.
In: Materials Science Forum 695 (2011), S. 1–4.
[91]