Bond Strength Testing System HP 1000

ENGINEERINGADVANTAGE
Bond Strength Testing System HP 1000
Application of customers
• the bond strength testing system HP 1000 serves for the
determination of adhesive and/or tensile strength of coatings and
materials, it is appropriate for the examinations according to DIN
EN 24624 and DIN ISO 1048
• experiences of many years, in close co-operation with users as
well as important and prominent expert in the area of the tensile
strength examination, led to the bond strength testing system
HP1000 and the associated system components
• a test plunger is stuck on the material which is to be examined and
torn off by a piston with a pre-selected force rise rate. The tensile
strength will be calculated by determining the retractile force
Structure
• principal item of the bond strength testing system HP 1000 is a bond
strength control device, executed as a compact unit. According to
requirements and application different standard pistons (0.6...20 kN)
and test plungers can be mounted.
Characteristics:
• modular structure, optimally adaptable on respective targeted
application by choice of the appropriate piston and test plunger.
• logical arranged operating and display panel contains bilingual
operating instructions (German and English).
• simple operation in connection with electronic test sequence
ensures a safe test execution and excludes process errors in a high
degree.
• equipment is portable and therefore suitable for the mobile
application.
• PC - supported control software in preparation.
The best of hydraulics and electronics combined in a single system
max
N/s
POWER
ERROR
F[kN] A[cm²]
kN
kN
P1
P2
P3
P4
P5
0,6
3,5
9
14
20
Steuertasten / control keys
0,60
3,78
9,43
14,73
21,21
Cont. Start
ESC
ENTER
Break Stop
Zugkolben fährt aus zum Ankoppeln
Thrust piston moves out ready for coupling
Zugkolben fährt in Gestell ein
Thrust piston moves into frame
Start
Prüfablauf beginnt, Kraftaufbau mit gewählter
Kraftanstiegsgeschwindigkeit, LED ein
Test sequence starts, force build-up with selected
rate, LED on
Stop
Prüfablauf wird beendet, Gerät geht in Grundstellung,
Display zeigt “StoP”
Test sequence is ended, unit changes in basic
position, Display shows “StoP”
Break
Kraftaufbau wird unterbrochen, Kraft am Prüfling
wird gehalten, LED ein
Force build-up is interrupted, test speciem
remains under stress, LED on
Cont.
Kraftaufbau wird nach Unterbrechung fortgesetzt
Force build-up is continued after interrupt
Next Service
Konfigurationstasten / setup keys
N/s
max
kN
Display zeigt aktuelle Kraftanstiegsgeschw.
Display shows actual rate of force increase
Display
kN
Display zeigt aktuellen Maximalkraftwert
LED meldet aktive Limitierung
Display shows actual maximum force
LED indicates activated limitation
8.8.8.8.
Grundstellung
basic position
Prüfablauf
test sequence
Prüfende
end of test sequence
Konfiguration
Setup
Display zeigt aktuellen Zugkolben
Display shows actual thrust piston
Eingabetasten / input keys
ENTER
ESC
Ermöglicht Eingabe der Konfigurationswerte,
Display blinkt. Erneutes Drücken speichert Wert
First press initiates input of setup values,
display flashes. Second press stores value.
Abbruch des Änderungsvorganges
Input procedure is canceled
HERION
Display
“StoP”
ansteigender Kraftwert
increasing force value
Endwert max. Kraft
Result max. force
Eingabewert, blinkend
Set value, flashing
LED kN
aus
off
ein
on
blinkend
flashing
aus
off
Systemtechnik
GmbH
Service: +49 (0) 7033 3018 0
HP 1000
Control panel
System extent
• compact bond strength testing unit consisting of hydraulically
pressure supply with electronic test sequence and operating panel
Technical data – Bond Strength Testing Unit
• pump performance
[l/min] 0,3
• hydraulic operating pressure [bar]
100
• motor performance
[KW]
0,175
• tank capacity
[l]
0,7
• weight
[kg]
approx.. 16
• dimensions
[mm] B 510, H 280, T 150
• mains connection
110...230 V / 50...60 Hz ; 240 W
Accessories
• different thrust pistons according to necessary traction power
range selectable
• hydraulic hoses with quick connection coupling
• universal test rack for the mounting of the different pistons
• various types of test plungers
• further accessories such as cable remote control and PC supported control software inpreparation
Drucknorm 7503553.02.03.04
Technical data – Accessories
• piston traction power range [kN]
size 0.6
size 3.5
size 9
size 14
size 20
mass, depending on size
[kg]
• hydraulic hose
filled with oil
[m]
• extension hose length
[m]
• test plunger size
[mm]
squarely
round
round
round
Contact:
Technical consultation and order handling
Mister Linhard Steeb
Tel. +49 (0)70 33/30 18-441
Fax +49 (0)70 33/30 18-30
[email protected]
0,06...0,6
0,35...3,5
0,90...9,0
1,4...14,0
2,0...20,0
4...7
3,00
3,00
50 x 50
20
50
100
HERION Systemtechnik GmbH
Untere Talstr. 65
D – 71263 Weil der Stadt
Tel. +49 (0)70 33/30 18-0
Fax +49 (0)70 33/30 18-10
[email protected]
www.herion-systemtechnik.de