Media KiT - Henrich Mediacenter

Transcription

Media KiT - Henrich Mediacenter
IN
US
KL
23 Euro
56. Jahrgang |
5
Heft 3 | Mai 201
www.bbr.de
E
IV
chäftsToni Räber, Ges
AG:
führer der AL- Cut ronic
Byst
von
izer
ptim
Byo
r
»De
.« 16
Zeit
spart Material und
hling,
Dr. Christian Frö
SMS Siemag:
rückgergie
»Potenzial zur Ene
vor allem in
winnung findet sich
32
.«
den Nebenprozessen
www.bbr.de
er
Ein zuverlässig
Partner
r als 13 000 Kunden
inen
Formen- und Masch
2016
Media KIT
-,
aus dem Werkzeug
ng.
ieru
– meh
teile der Standardis
MEUSBURGER
bau nutzen die Vor
FOKUS
trol
Pünktlich zur Con
erscheint der Son
,
sen
Mes
r
übe
derteil
Prüfen und
ng
Qualitätssicheru
in der bbr.
Seite 45
1
Media kit
2016
magazine profile
Henrich Publikationen GmbH, Talhofstraße 24 b, 82205 Gilching, Germany, Telephone +49 810 538 53-50, Fax +49 810 538 53-11, [email protected]
1. Profil in Brief:
By way of reports, interviews, product news and market analyses, bbr offers senior management in the belt, sheet metal, pipe, profile and wire processing industries important
information and decision-making tools for complex practical tasks. In addition to successful solutions for rational planning, manufacture and quality assurance, bbr also reports on
relevant developments in Research and Development. Our authors offer support not only
on technical issues, however, but also highlight specialist issues affecting personnel, organisation and the economic environment of a company. Interviews, discussions and controversial opinions encourage specialist discourse in the industry.
The reader may visit www.bbr.de on the Internet for in-depth discussions of many topics,
including also current announcements and schedules.
2.frequency:
7 per year
3.edition:
57th edition 2016
4.WEB-ADdRESS:
www.bbr.de
5.memberships:
–
6.ORGAN:
Industrieverband Blechumformung (IBU)
7. Publisher:
Henrich Publikationen GmbH
8.Publishing house:Henrich Publikationen GmbH
Postal address:
Talhofstraße 24 b, 82205 Gilching, Germany
Telephone:
+49 810 538 53-50
Fax:
+49 810 538 53-11
Email: [email protected]
9. editorial staff:
Hans-Georg Schätzl, ChR
[email protected]
10.Media Sales:Thomas Schumann, AL
[email protected]
11. distribution:Henrich Publikationen GmbH, Magdalena Roitzsch
Telephone: +49 810 538 53-62
Fax: +49 810 5 38 53-11
Email: [email protected]
12.subscription prices:Annual subscription Germany:
Annual subscription abroad:
Single purchase:
All prices are net of value added tax plus dues of distribution
13.ISSN:
0005-3848
14.page analysis: 2014 = 7 issues
Magazine format:
132.00 €
132.00 €
23.00 €
230 x 325 mm
Total pages:
708.0 pages =100.0 %
Editorial share:
520.5 pages = 73.7 %
Share of advertisements:
187.5 pages = 26.3 %
Of these:Occasional advertisements:
0 pages = 0.0 %
Bound inserts:
0 pages = 0.0 %
Ads from publishers and printers: 22.9 pages = 3.1 %
Loose inserts: 9
}
Of total
advertisement
15.editorial content analysis: 2014 = 520.5 pages
Rubric:
pages
Workplace, safety engineering, disposal, recycling
13.6
Editorial, content, imprint, miscellaneous
30.0
Research, development and light construction
31.0
Joining technology mechanical, brazing, bonding 10.4
Laser technology
26.3
Material transfer, storage technology, handling, robotics
29.7
Opinion, viewpoint, portrait, interview, jubilee
30.8
Associations, trade fairs, events, media, marketing
21.0
News, people, career
26.6
Surface technology (burring, grinding, coating, oiling)
28.7
Products
32.0
Quality management, measurement and testing technology
18.5
Belt conveyor systems, straightening technology
16.6
Tube-, section- and wire processing
33.0
Welding technology
27.3
Software, hardware, machine and system control
11.4
Separation technology (parting, cutting, sawing, water-jet cutting, stamping) 40.7
Forming (milling, compression, pressure forming, shaping, extraction, bending)27.6
Materials, semi-finished products
28.7
Tools
9.5
Economy, management, smart factory
27.1
%
2.6 %
5.8 %
6.0 %
2.0 %
5.0 %
5.7 %
5.9 %
4.0 %
5.1 %
5.5 %
6.1 %
3.6 %
3.2 %
6.3 %
5.2 %
2.2 %
7.8 %
5.3 %
5.5 %
1.8 %
5.2 %
Media kit
2
distribution and
circulation analysis
2016
Henrich Publikationen GmbH, Talhofstraße 24 b, 82205 Gilching, Germany, Telephone +49 810 538 53-50, Fax +49 810 538 53-11, [email protected]
16. audited distribution:
18. analysis of geographical distribution:
Publisher’s information: planned distribution for 2016
Member of “Informationsgemeinschaft zur Feststellung der Verbreitung von
Werbeträgern e.V.” (translation: German Circulation Control Board e.V.)
Region:
Proportion of total circulation
%
Copies
94.09
12,687
17. circulation analysis:
Germany:
Average number of copies per issue 1st July 2014 - 30th June 2015.
Other countries:
5.91
797
Actual circulation:
100
13,484
Print run:
Number of distributed copies:
14,000
13,484
Other countries
797
18.1 Analysis of geographical distribution in germany
according to nielsen-areas:
Publisher’s information: planned distribution for 2016
Sold copies:
– Subscribed copies
– Single purchase
– Others
Free copies:
Remaining and archive copies:
658
560
–
98
12,826
516
Other countries
Members
88
%
Copies
215
Nielsen area 1:
10.90 %
(Hamburg, Bremen, Schleswig-Holstein, Lower Saxony)
1,383
Nielsen area 2:
(North Rhine-Westphalia)
25.92 %
3,288
Nielsen area 3a:
(Hesse, Rhineland-Palatinate, Saarland)
12.79 %
1,623
Nielsen area 3b:
(Baden-Wurttemberg)
21.52 %
2,730
Nielsen area 4:
(Bavaria)
16.18 %
2,053
Nielsen area 5-7:
(Berlin and eastern federal states of Germany)
12.69 %
1,610
100 %
12,687
Actual circulation in Germany:
Media kit
2016
readership analysis
3-E
Henrich Publikationen GmbH, Talhofstraße 24 b, 82205 Gilching, Germany, Telephone +49 810 538 53-50, Fax +49 810 538 53-11, [email protected]
19. Fields of business/economic sectors:
Publisher’s information: planned distribution for 2016
Department/
Group/
Class
Recipient groups
Classified by industry/trade
German classification of economic activities, Federal Office of Statistics,
edition 2008
24
Manufacture of fabricated metal products
25
Proportion of total circulation
Copies
%
Total
5.99 %
808
Manufacture of basic metals
41.77 %
5,632
28
Mechanical engineering
17.08 %
2,303
28.23, 26.2, 26.3
Manufacture of office machinery, manufacture of machinery and equipment not
elsewhere classified, manufacture of electricity equipment; manufacture of radio,
television and communication equipment and apparatus
7.32 %
987
27
Manufacture of electrical equipment
5.53 %
746
26.6, 26.51.1, 32.5, 26.7
Manufacture of medical equipment, manufacture of equipment for measuring and
control and regulatory technology, optical equipment
4.30 %
580
29
Manufacture of motor vehicles, trailers, semi-trailers and automotive parts
10.02 %
1,351
30
Manufacture of other transport equipment
3.50 %
472
95.51 %
12,879
Manufacturing sector in total
45-46
Retail trade
4.49 %
605
Actual circulation
100 %
13,484
Please note : Details on the survey method on page AMF-O.
20. size oF organisation:
Clear, precise and direct
Publisher´s information: planned distribution for 2016
Proportion of total circulation
%
Copies
< 50 employees
22.90 %
3,088
50-99 employees
25.61 %
3,453
100-199 employees
21.46 %
2,894
200-499 employees
16.15 %
2,178
500-999 employees
6.93 %
934
> 1,000 employees
6.85 %
924
Others
0.10 %
13
Actual circulation
100 %
13,484
The structure of the recipients of bbr is broken
down in fields of business, sizes of business and
positions within the company which shows you
precisely how your target groups are selected for
distribution.
You can use this structure for your direct mailing
campaigns. Please give us a call – we will be glad
to provide you with all the details.
21.1 job characteristic: scope of functions No data are available for this topic
21.2 job characteristic: position in organisation
Publisher’s information: planned distribution for 2016
Proportion of total circulation
Copies
%
Total
Management
Owner, board member, managing director
45.88 %
6,186
Technical management
Technical management, production manager, plant and works managers, senior department
and divisional managers, heads of department
46.66 %
6,292
Purchasing
Technical purchasing managers, commercial managers
7.46 %
1,006
Actual circulation
100 %
13,484
Please note: Details on the survey method on page AMF-O.
22. education/training:
23. AGE:
}
No data are available for this
topic due to its limited
relevance for the magazine.
advertisement price list
no: 57
Media kit
2016
Valid from 1st October 2015
P
Henrich Publikationen GmbH, Talhofstraße 24 b, 82205 Gilching, Germany, Telephone +49 810 538 53-50, Fax +49 810 538 53-11, [email protected]
1. circulation:
Print run:
Average number of distributed copies
(in line with AMF-scheme: 2, no. 17):
14,000
13,484
2. magazine format:
230 mm width,
325 mm height
type area:
200 mm width, 282 mm height,
number of columns: 4,
column width: 47 mm
3.printing method/printing material:
Offset, adhesive binding
Printing material in digital form, optimized for 70 line/cm screen ruling
(please order our instruction leaflet).
7. advertisement rates and formats (in €):
Format
Width x height in mm
Basic rate b/w
2/1 page
431 x 282
6,302.00 €
1/1 page
200 x 282
3,316.00 €
2/3 page
132 x 282 / 200 x 184
2,208.00 €
Junior page
149 x 202
1,830.00 €
1/2 page
98 x 282 / 200 x 140
1,664.00 €
1/3 page
64 x 282 / 200 x 92
1,104.00 €
1/4 page
47 x 282 / 98 x 140 / 200 x 68
830.00 €
1/8 page
47 x 140 / 98 x 68 / 200 x 32
459.00 €
4. deadlines:
Frequency: Dates of publication: Closing dates: 7 issues per year
see editorial schedule
see editorial schedule
5.publisher:
Henrich Publikationen GmbH
Talhofstraße 24 b
82205 Gilching, Germany
Telephone: + 49 810 538 53-0
Fax: + 49 810 538 53-11
Email: [email protected]
6. Terms of payment:
The invoiced amount is payable net (without deduction) within 30 days of
the invoice date. If payment is made within eight days, the publisher grants
the customer a discount of 2 %. If payment is made in advance, the publi­sher
grants a discount of 3 % of the invoiced amount.
Tax no. 2645 223 73105, VAT ident no. DE 163 778 434
bank details:
Postbank München, IBAN DE81 7001 0080 0915 0428 02, BIC PBNKDEFF
9. Special Advertisement formats: on request
10. discounts:
for insertions within 12 months
Frequency discounts 3 adverts 5 % 6 adverts 10 % 10 adverts 15 %
Volume discounts 2 pages 5 % 4 pages 10 %  6 pages 15 %
11. combinations:
Further rates, combinations and multi-year contracts on request.
preferential placement:
Cover 2
Cover 3
Cover 4
1/8 page across gutter below table of contents
Front cover (only 4c)
Inside front page (only 4c)
3,995.00 €
3,818.00 €
3,995.00 €
1,040.00 €
5,595.00 €
4,876.00 €
layout surcharges:
Costs for technical services like layout and lithograph production are invoiced at cost price.
8.surcharges:
8.1Colour surcharges:
for each scale colour2/1 page and smaller
1/1 page and smaller
1/2 page and smaller
1/3 page and smaller
1/4 page and smaller
1/8 page and smaller
for each special colour (which cannot be extracted from a 4c typeset)
790.00 €
395.00 €
281.00 €
227.00 €
186.00 €
143.00 €
660.00 €
8.2placement:
Other fixed placements of advertisments and inserts 10 % surcharge.
Bleed / double page spread: 10 % surcharge.
All surcharges and technical costs are not subject to discount!
advertisement data:
In order to process your order optimally and quickly we receive your motifs digitally.
We process all professional Mac and PC formats. Please send your data via e-mail to dispo@
verlag-henrich.de.
12. b o u n d i n s e r ts :
< 120 g
2 pages
3,902.00 €
4 pages
5,852.00 €
8 pages
7,781.00 €
Paper weight
< 170 g
4,095.00 €
6,131.00 €
8,167.00 €
> 170 g
4,307.00 €
6,442.00 €
8,565.00 €
A sample insert is required when placing an order. Please deliver untrimmed
(format: 236 x 331 mm). In case of multiple-page inserts please deliver folded.
13. loose inserts:
Total
Price
circulation
per thousand
up to 25 g
248.00 €
up to 30 g
270.00 €
up to 35 g
294.00 €
Total
circulation
up to 40 g
up to 45 g
up to 50 g
Price
per thousand
321.00 €
345.00 €
368.00 €
A sample insert is required when placing an order. Maximum size 224 x 317 mm,
heavier and partial loose inserts on request.
14. insert stickers:
In combination with an advert or insert When processed by machine, gluing costs are included
– Manual processing
1,370.00 €
on request
15. delivery address for positions 12-14
Sellier Druck GmbH, Angerstr. 54, 85354 Freising, Germany
Label: ”
“ and the according issue.
Delivery at the latest 10 days prior to publication, required copies: 14,300
The processing of the data will be free of charge as long as the data comply with our common
terms of digital data acceptance of advertisements. Additional expenditure incurred due to
data being incorrect or incomplete, will be invoiced at cost price. You find the technical profile
in our media center at www.henrich-mediacenter.de.
P
advertisement formats
Media kit
Supplement to advertisement price list no. 57
Valid from 1st October 2015
2016
Henrich Publikationen GmbH, Talhofstraße 24 b, 82205 Gilching, Germany, Telephone +49 810 538 53-50, Fax +49 810 538 53-11, [email protected]
/ page
/ page
2 1
Type area
Bleed*
/ page, vertical
13
64 x 282 mm
79 x 325 mm
11
431 x 282 mm
460 x 325 mm
/ page, horizontal
13
200 x 92 mm
230 x 115 mm
/ page, vertical
2 3
200 x 282 mm
230 x 325 mm
/ page, vertical
14
47 x 282 mm
62 x 325 mm
132 x 282 mm
147 x 325 mm
/ page, horizontal
2 3
200 x 184 mm
230 x 207 mm
Junior page
149 x 202 mm
164 x 225 mm
/ page, vertical
12
98 x 282 mm
113 x 325 mm
/ page, horizontal
12
200 x 140 mm
230 x 162 mm
/ page, 2-columned 1/ 4 page, 4-columned 1/8 page, 1-columned 1/8 page, 2-columned 1/8 page, 4-columned
14
98 x 140 mm
113 x 162 mm
200 x 68 mm
230 x 91 mm
47 x 140 mm
62 x 162 mm
98 x 68 mm
113 x 91 mm
200 x 32 mm
230 x 55 mm
*For technical reasons the printing material for each bleed advert has to have additional 3 mm on all sides for trimming.
All Information in mm (width x height)
bound inserts:
Orders can only be accepted and confirmed if a binding sample has been submitted, if
necessary a blind sample with declaration of size and weight. They have to comply to post
regulations to be not mixed up with editorial content. The placement of inserts depends on
the technical possibilities. Inserts have to be delivered untrimmed, multiple-page inserts
have to be folded. The front page of the insert has to be marked. Inserts have to be in a
condition in which no further processing is necessary.
FORMATs:
2- and 4-sided
1 sheet (= 2 pages)
236 x 333 mm
fold
2 sheets (= 4 pages)
472 x 333 mm
5 mm
333 mm
325 mm
trimmed
3 sheets (= 6 pages)
683 x 333 mm
236 mm
untrimmed
230 mm
trimmed
3 mm
3 mm
cutting 3 mm each side
3 mm
472 mm
Copies required:
Delivery date:
14,300 copies (incl. excess quantity)
10 days prior to publication
6-sided
fold
fold
333 mm
325 mm
trimmed
5 mm
236 mm
untrimmed
227 mm
219 mm
230 mm
trimmed
224 mm
219 mm
cutting 3 mm each side
682 mm
Technical data:
Inserts will be inserted loosely. Maximum size: width 224 x 317 mm. They have to be in a
condition where no further processing is necessary. For this purpose, loose inserts are to
be delivered unbundled and uncrossed. Additional processing (e. g. folding) will be
charged separately. Loose inserts printed on other material than paper can only be accepted if a binding sample has been submitted and if publishing house and post have
agreed in advance.
Copies required:
Delivery date:
14,300 copies
10 days prior to publication
INSERT STICKERS:
Glued postcards or advertising materials on inserts or adverts are charged at 1,370.00 €, including adhesive costs for
mechanical gluing. For parallel gluing edges the insert stickers can be placed on a right-hand page against the binding
in accordance with the adjacent sketch. The binding of the
insert sticker can point to the binding or the foot of a brochure. A positioning instruction is mandatory before production. Gluing is only possible in the area marked in blue. No
gluing is possible in the yellow area between 30 and 60 mm
from the binding for technical reasons. Adhesive costs will
be charged at cost in all other cases than that described
above, including oblique positioning.
*) the distance from the cut-off is 20 mm if the insert sticker
should not be cut.
20 mm
2 0 mm
20 m m *)
20 m m
Tip-on samples:
Brochures, CDs and samples are possible. Orders can only be accepted if a binding sample
has been submitted. Prices and gluing costs on request.
3 mm
3 mm
Loose inserts:
Orders can only be accepted and confirmed if a binding sample has been submitted, if
necessary a blind sample with declaration of size and weight. They have to comply to post
regulations to be not mixed-up with editorial content. The placement of inserts depends
on the technical possibilities.
Delivery address for bound inserts, loose inserts and postcards:
Sellier Druck GmbH, Angerstr. 54, 85354 Freising, Germany
Label: ”
“ and the according issue.
Media kit
2016
Visit www.henrich-mediacenter.de
for detailed information
Website
O
Henrich Publikationen GmbH, Talhofstraße 24 b, 82205 Gilching, Germany, Telephone +49 810 538 53-50, Fax +49 810 538 53-11, [email protected]
1.web-Adress:
www.bbr.de
2.profile in brief:
bbr.de offers premium content in the fields of technology, management,
economy, science and careers to specialists and management in the metal
industry. The user is offered free access to daily reports as well as the full
archived content of past magazines. The website offers links to information
on the companies in the sector, a comprehensive events and fair calendar, a
movie site, tips on books, the job market and much more, rendering it a
­valuable platform for your daily information.
5.Access control:
IVW
6.Usage data:
www.ivw.de
3. Target group:
Owner, directors, general management and technical management in the
branches metal production and machining, manufacture of metal products,
automotive and other vehicle production, electric-, electronic- and medicalproduction, engineering and processing industry overall.
4. Prices and types of advertisement:
Type of advertisement
Placement
Format/size in pixels
Data volume up to
Price in €
Full Banner
all pages
468 x 60
80 KB
  93.00/CPM
Half Banner
all pages
234 x 60
80 KB
  53.00/CPM
Leaderboard
all pages
728 x 90
80 KB
159.00/CPM
Wide Skyscraper
all pages
160 x 600
80 KB
187.00/CPM
Half Skyscraper
all pages
160 x 300
80 KB
118.00/CPM
Rectangle
all pages
336 x 280
80 KB
200.00/CPM
Footer Layer
all pages
806 x 100
80 KB
173.00/CPM
homepage
1,500 characters + picture
80 KB
  188.00/week
Text Ad
Additional formats and special ads on request.
Media kit
2016
Visit www.henrich-mediacenter.de
for detailed information
Newsletter
O
Henrich Publikationen GmbH, Talhofstraße 24 b, 82205 Gilching, Germany, Telephone +49 810 538 53-50, Fax +49 810 538 53-11, [email protected]
1.Name:
6.Usage data:
BBR-Newsletter
2,950 recipients (as of 08/05/2015)
2. Profile in brief:
The weekly newsletter offers its readers current information about the industry. Every Friday, it provides information on current market issues and
developments in engineering and management. The newsletter in this way
provides a comprehensive stream of information to specialists and managers in the belt, sheet metal, pipe, profile and wire processing industry.
3.target group:
Owner, directors, general management and technical management in the
branches metal production and machining, manufacture of metal products,
automotive and other vehicle production, electric-, electronic- and medicalproduction, engineering and processing industry overall.
4. Frequency:
weekly
5. Prices and types of advertisement:
Format/size in pixels
Data volume up to
Full Banner
Type of advertisement
468 x 60
80 KB
316.00
Half Banner
234 x 60
80 KB
269.00
Leaderboard
Wide Skyscraper
Half Skyscraper
We recommend static image files.
Flash files cannot be processed.
Rectangle
Text Ad
Additional formats and special ads on request.
Price in €/dispatch
728 x 90
80 KB
720.00
160 x 600
80 KB
1,087.00
160 x 300
80 KB
688.00
336 x 280
80 KB
823.00
1,500 characters + picture
80 KB
378.00
Media kit
2016
Website and Newsletter
Formats
O
Henrich Publikationen GmbH, Talhofstraße 24 b, 82205 Gilching, Germany, Telephone +49 810 538 53-50, Fax +49 810 538 53-11, [email protected]
1. Banner formats:
Full Banner
468 x 60 px
Data volume up to 80 KB
Placement website: all pages
Half Banner
234 x 60 px
Data volume up to 80 KB
Placement website: all pages
Leaderboard
728 x 90 px
Data volume up to 80 KB
Placement website: all pages
Wide Skyscraper
160 x 600 px
Data volume up to 80 KB
Placement website: all pages
.............
.............
.............
Half Skyscraper
160 x 300 px
Data volume up to 80 KB
Placement website: all pages
Rectangle
336 x 280 px
Data volume up to 80 KB
Placement website: all pages
1,500 characters + picture
Text Ad
Data volume up to 80 KB
Placement website: frontpage
Footer Layer
806 x 100 px
Data volume up to 80 KB
Placement website: all pages
Footer Layer website only
Address rental
price list
Media kit
2016
Valid from 1st October 2015
Henrich Publikationen GmbH, Talhofstraße 24 b, 82205 Gilching, Germany, Telephone +49 810 538 53-50, Fax +49 810 538 53-11, [email protected]
The perfect addition to your cross-medial advertising efforts: Direct mailing efforts
General information
Selection lump sump Minimum contract value Minimum purchase after matching 70 %
€ 150.00
€ 475.00
illustration
2. Usage
Company address
with characteristic of industry
+ Company size and / or regional limitation
} 10%
} 15%
illustration
3. Usage
discount
discount
Customized Address
€ 0.28
€ 0.33
by position / function
+ Line of business
+ Company size and / or regional limitation
€ 0.38
€ 0.43
€ 0.48
We gladly take care of the entire handling:
Exemplary calculation to our lettershop 1-paged laser letter DIN-long format + flyer
Circulation
500
2 000
4 000
8 000
12 000
Address rental customized address (1 characteristic) incl. selection lump sump
€ 340.00
€ 910.00
€ 1,670.00
€ 3,190.00
€ 4,710.00
Production laser letter (customzied letter: laser printing 1/0-coloured DIN A4)
€ 202.50
€ 255.00
€ 340.00
€ 510.00
€ 680.00
Folding + enveloping of 2 mailing components, stamping, postal delivery
€ 180.00
€ 180.00
€ 183.60
€ 367.20
€ 469.20
Domestic postal charges*
€ 310.00
€ 1,240.00
€ 1,120.00
€ 2,240.00
€ 3,360.00
€ 1,032.50
€ 2,585.00
€ 3,313.60
€ 6,307.20
€ 9,219.20
Total cost**
The prices are to be understood plus Value Added Tax.
* 20 g, DIN-long, from circulation of 4,000 copies as Infopost possible.
** plus envelope DIN-long with window; € 12.50 prer thousand.
Contact: Magdalena Roitzsch · Phone +49 810 538 53-62 · [email protected]
P
Media kit
2016
Media center
Henrich Publikationen GmbH, Talhofstraße 24 b, 82205 Gilching, Germany, Telephone +49 810 538 53-50, Fax +49 810 538 53-11, [email protected]
Henrich media center: Your information platform for target group oriented customer approach
Have a look now!
www.henrich-mediacenter.de
Media kit
2016
Special subjec
Henrich Publikationen GmbH, Talhofstraße 24 b, 82205 Gilching, Germany, Telephone +49 810 538 53-50, Fax +49 810 538 53-11, [email protected]
bbr WIRE
bbr FUTURE
bbr FUTURE
Special section
in bbr 02/16
Special section
bbr 03/16
Special section
bbr 05/16
55. Jahrgang | 18 Euro | Sonderteil | März 2014 | www.bbr.de
'#+%'
Auch Profildraht ist meist
rund, bevor er umgewalzt
wird – zunächst am besten
virtuell $
''+'%
Edelstahl ist bei Architekten
beliebt – man muss ihn aber
sorgfältig auswählen
WIRE
2016
'' '
,,,, sollen laufen und nicht stehen
24 SEITEN Aktuelles und neueste Entwicklungen aus der
Circulation:
14, 000 copies
inside main edition
+ further 2,000 copies for the tradefair
wire & Tube
55. Jahrgang | Heft 1 | Mai 2014 | www.bbr.de
%&(&,,"%2//#
+"%0)
»Kurzzeitsintern kann sogar
einfaches Eisen zu einem
›Hartmetall‹ machen.« -'
#**&*$.
1.+*% * % *
»Moderne Kaltumformung
kann manche Nachfolgeprozesse einsparen.« FUTURE
Key topic
Industry 4.0
Circulation:
14,000 copies
! ,,
,( &)
* ,*
& ,
*, *",
* *&
Welt*
,
des Drahts
bbr WIRE is a logical extension of the bbr topics dealing with the manufacture and processing of wire. Be it springs or rigid bodies or be
it for the automobile, furniture or electrical
sector or for the industry or job shoppers –
the majority of wire processing companies
also manufactures metal sheets, profiles and
pipes. Therefore, bbr and bbr WIRE reach a
large coincidence of target group readers,
thus delivering high value to the customer.
Every two years, bbr WIRE is published as a
special section in the trade fair edition of bbr
and as an additional separate edition for the
trade fair, wire, in Düsseldorf.
Industrie
4.0
-+..#-&#1#-'./+3#
&)#//!#1#-!
AUSBLICK auf die industriellen Prozesse von Morgen
konnte sich beim neuen SL für viel Aluminium entscheiden,
aber ist Leichtmetall auch eine Lösung für die Massenproduktion?
24 SEITEN Entwicklungen und Ideen für Morgen
%&(&,,"%2//#
+"%0)
»Kurzzeitsintern kann sogar
einfaches Eisen zu einem
›Hartmetall‹ machen.« -'
#**&*$.
1.+*% * % *
»Moderne Kaltumformung
kann manche Nachfolgeprozesse einsparen.« FUTURE
Date of publication:
03/23/16
Closing date:
02/29/16
Editorial deadline:
02/22/16
55. Jahrgang | Heft 2 | September 2014 | www.bbr.de
Date of publication:
04/18/16
Closing date:
03/22/16
Editorial deadline:
03/15/16
bbr FUTURE directs its gaze into the future. We
enter into dialogue with the nuclei of research
and deve­lopment. The editorial office searches
for trendsetting ideas in the academic environment, in industry´s laboratories and in the garages of the start-ups. The spectrum of technical information on the latest findings in metal
processing, on machines and plant control and
on production planning is complemented by
topical information on management methods.
Again, the main subjects in the issues April and
September are Industrie 4.0 and light construction on all of its bevels. For December, we are
focusing on further two future subjects: energy management and drive technology.
LEICHTBAU
-+..#-&#1#-'./+3#
&)#//!#1#-!
konnte sich beim neuen SL für viel Aluminium entscheiden,
aber ist Leichtmetall auch eine Lösung für die Massenproduktion?
24 SEITEN Entwicklungen und Ideen für Morgen
Key topic
Light construction
Circulation:
14 0 00 copies
Date of publication:
09/09/16
Closing date:
08/17/16
Editorial deadline:
08/10/16
bbr FUTURE
Special section
bbr 07/16
57. Jahrgang | Heft 3 | September 2016 | www.bbr.de
Philipp Schütte,
RU Bochum:
»Kurzzeitsintern kann sogar
einfaches Eisen zu einem
›Hartmetall‹ machen.« 58
Mark Jennings,
Dawson Shanahan:
»Moderne Kaltumformung
kann manche Nachfolgeprozesse einsparen.« 78
FUTURE
Energiemanagement +
Antriebstechnik
24 SEITEN Entwicklungen und Ideen für Morgen
Key topic
drive technology
Circulation:
14 0 00 copies
Date of publication:
11/16/16
Closing date:
10/14/16
Editorial deadline:
10/07/16
GENERAL TERMS AND CONDITIONS
§ 1 Scope of validity, exclusivity
  1.The acceptance and publication of all advertising orders and follow-up orders are governed exclusively by these General
Terms and Conditions, as well as by the Publisher’s price lists in effect at the time of conclusion of contract, which form a
material component of such contract. The validity of any general terms and conditions of the customer is precluded to the
extent they are inconsistent with these General Terms and Conditions.
§ 2 Offer, conclusion of contract
  1.Orders for advertisements may be submitted personally, by phone, letter, fax, or email, or online. The Publisher is not liable
for transmission errors.
  2.A contract comes into existence only after written confirmation of the order by the Publisher. The price list in effect at the
time of conclusion of contract is applicable in each case. The customer can obtain information about the price list directly
from the Publisher or at www.verlag-henrich.de.
  3.The Publisher may in its discretion reject advertisement orders, including individual placements in connection with a package contract. This applies, in particular, to advertisements whose content violates laws, standards of public decency, or
governmental regulations, to those that have been objected to in complaint proceedings before the German Advertising
Standards Council (Deutscher Werberat), to those whose publication cannot be reasonably expected of the Publisher due
to their content, origin, or technical form, and to inserts whose format or layout could give readers the impression that they
form part of the newspaper or that contain advertisements by other parties. The Publisher must give notice of rejection
promptly after becoming aware of the relevant content.
§ 3 Prices, payment terms, price reduction
  1.The compensation applicable between the Publisher and the customer results from the order confirmation. If a written order
confirmation was not given, or if compensation is not evident in the order confirmation, the price list in effect at the time
the order was issued is applicable.
  2.The price for publication of an advertisement is determined according to the price list currently in effect. In the event the
advertisement price list is changed, the new terms apply also to ongoing contracts.
  3.Prices may be changed at any time. For orders already confirmed by the Publisher, however, price changes are effective
only if they were announced at least one month in advance. In such case, the customer is entitled to terminate, which right
must be exercised in writing not later than 14 days after announcement of the price increase. In such case, discounts need
not be refunded pursuant to No. 5. Farther-reaching claims of the customer are precluded. If termination does not occur, the
price increase is deemed approved for existing orders as well.
  4.The discounts described in the price list are granted only to the customer and only for advertisements appearing within a
given year (“Advertising Year”). Discounts for repeat orders are valid only during an Advertising Year. Unless agreed otherwise, the period begins to run with the appearance of the first advertisement.
  5.The discounts described in the price list are granted only for advertisements appearing during a given year. Unless agreed
otherwise in writing at the time of conclusion of contract, the period begins to run with the appearance of the first advertisement. If the one-year period is not complied with, the customer is obligated to refund to the Publisher the amount of the
difference between the discount granted under the contract with respect to the stipulated total volume and the discount
corresponding to the actual number of advertisements placed.
  6.In the event the order is expanded, this gives rise to a claim to a retroactive discount, provided that the basic order is subject
to discounting. The claim lapses unless asserted not later than one month after expiry of the Advertising Year. If an order
does not reach the anticipated order volume, the excess price discount granted is invoiced retroactively.
  7.The invoiced amount is payable net (without deduction) within 30 days of the invoice date. If payment is made within eight
days, the Publisher grants the customer a discount of 2%. If payment is made in advance, the Publisher grants a discount of
3% of the invoiced amount.
  8.Payments must be made net of all costs and fees to the Publisher’s bank accounts indicated in the invoice. In the event of
late payment, interest is charged in accordance with Section 288 of the German Civil Code (Bürgerliches Gesetzbuch, BGB).
Collection costs incurred as a result of late payment are for the account of the customer. In the event of late payment, the
Publisher may suspend further processing of a current order until payment is made and demand payment in advance. Should
there be justified concerns about the customer’s ability to pay, the Publisher is entitled to make the appearance of further
advertisements dependent on payment in advance of the advertisement fee and on the settlement of open invoices, including during the term of a contract and regardless of the originally agreed payment terms. Erroneous advertisement invoices
may be corrected within six months of invoice issuance.
  9.All prices are net of value-added tax applicable on the date of invoice issuance. For advertisement orders emanating from
outside Germany that are not subject to value-added tax, invoices are issued without a charge for value-added tax. The
Publisher is entitled to invoice for value-added tax retroactively if the tax authorities determine that the advertisement is
subject to tax.
10.In the event a contract is concluded for several advertisements, a claim to price reduction may be derived from a reduction in
circulation if the overall average of the insertion year beginning with the first advertisement is less than the average circulation of the prior calendar year stipulated in the price list or in some other manner. A reduction in circulation is a defect justifying price reduction only if it amounts to 20% or more for a circulation of up to 50,000 copies. The price is to be reduced by
the same percentage as that experienced in the reduction in circulation.
§ 4 Positioning of advertising, labelling
  1.Unless agreed otherwise, the advertisement is placed in the next available issue.
  2.If several advertisements are booked in advance, same are, when in doubt, to be processed within one year following conclusion of contract. The publication of the advertisements is, when in doubt, spread equally over the placement period.
  3.The Publisher expressly reserves the right to make editorially related changes to the internal arrangement, layout, title, and
scope of the respective periodical, as well as the right to postpone publication dates when necessitated by such changes.
  4.The Publisher positions the advertisement taking the customer’s wishes into account to the greatest possible extent. Unless
agreed otherwise, the customer has no claim to a specific positioning or to the exclusion of advertising for goods or services of one of the customer’s competitors.
§ 5 Contract performance
  1.Advertisement orders are to be carried out within one year following conclusion of contract, beginning with the appearance
of the first advertisement.
  2.The customer is responsible for the timely delivery of flawless artwork. The Publisher promptly requests replacement for
perceptibly unsuitable or damaged artwork. The Publisher guarantees printing quality for the booked issue to the extent
made possible by the artwork. Artwork is returned to the customer only when specifically requested. Otherwise, it becomes
the property of the Publisher. The safekeeping obligation ends six months after expiry of the order.
  3.Costs for preparing ordered source material, videos, or drawings, as well as substantial changes to originally agreed versions desired by the customer or for which the customer is responsible, are for the account of the customer.
  4.Proofs are delivered only when expressly requested. The customer is responsible for the accuracy of the returned proof. If
the proof is not returned to the Publisher in timely fashion, print approval is deemed to have been given.
  5.The layout and labelling of advertisements with editorial content must be coordinated with the Publisher suitably in advance of publication. Advertisements surrounded on at least three sides by editorial content must be distinguishable from
such content through the font they employ. The Publisher is entitled to clearly label as advertising those advertisements that
are not readily identifiable as such.
  6.Replies to box-number advertisements are stored for up to four weeks following publication of the advertisement and sent
to the customer by regular mail (including where these involve express deliveries or registered mail). However, the Publisher assumes no liability for safekeeping and timely delivery of the offers.
  7.The advertising deadlines and publication dates set forth in the price list are not binding on the Publisher. The Publisher is
at liberty to modify these on short notice when called for by the production process.
  8.As a general rule, already submitted orders for advertisements can only be cancelled for significant reasons. Notification of
cancellation must be provided at the latest by the closing date for acceptance of advertising copy. The cancellation must be
supplied in written form, per telefax or email. If it is not possible to execute an order for reasons that are outside the control
of the publisher, the client shall still be required to pay the full cost of the transaction.
  9.The customer is responsible for the content and legal permissibility of the advertisement. It must indemnify the Publisher
against all claims by third parties occasioned by publication of the advertisement, including reasonable costs for legal
counsel. The Publisher is not obligated to review whether an advertisement order interferes with the rights of third parties.
If the Publisher is obligated by court order to print a correction or revision based on a placed advertisement, the customer
must bear the costs pursuant to the current advertisement price list.
10.Advertising agencies are obligated to adhere to the Publisher’s price list in their offers to, contracts with, and accounting
statements for advertisers. Commissions granted by the Publisher are calculated based on the net price to customers, i.e.
less discounts, bonuses, and rebates for defects. The commission is due only where orders are brokered for third parties. It
is paid only to advertising agencies approved by the Publisher, provided that the advertising agency issues the order directly, is responsible for procuring finished, print-ready artwork, and is in possession of a trade registration as an advertising agency. The Publisher is at liberty to reject orders from advertising agencies where there are doubts about the professional exercise of the agency activity or the creditworthiness of the advertising agency. Advertisement orders by advertising
agencies are issued in their names and for their account. If advertising agencies issue orders, the contract, when in doubt,
thus comes into existence with the advertising agency. If an advertiser becomes a customer, this must be agreed to separately under designation of the advertiser by name. The Publisher is entitled to demand proof of engagement from the advertising agency.
§ 6 Warranty against defects
  1.No guarantee is given that advertisements will appear in specific issues or at specific locations.
  2.The Publisher warrants that advertisements will be reproduced free of typographic defects corresponding to the printing
stock used, subject to the sending of suitable artwork (see technical information in the price list).
  3.Colour advertisements: When artwork is sent digitally for colour advertisements, the customer must simultaneously send a
colour proof. Otherwise, the customer is not entitled to reimbursement for any colour deviations.
  4.In the event of obvious defects, the customer must give notice of objection not later than two weeks following receipt of the
invoice. In the event of latent defects, the customer must give notice of objection not later than one year following publication of the corresponding item. In the event of defective printing of an advertisement despite timely delivery of flawless
artwork and timely notice of objection, the customer may demand the printing of a replacement advertisement that is free
of defects. The claim to cure is precluded if this is associated with unreasonable costs for the Publisher. If the Publisher does
not meet a reasonable deadline set for it, if it refuses to undertake the cure, if it is unreasonable to expect the customer to
accept the cure, or if the cure is unsuccessful, the customer has the right to rescind the contract or to reduce the price to the
extent that the purpose of the advertisement was interfered with. Warranty claims by merchants (Kaufleute) are prescribed
12 months after publication of the corresponding advertisement. If the customer fails to comply with the Publisher’s recommendations to create and send digital artwork, it is not entitled to any claims for defective advertisement publication. The
same also applies where it fails to comply with other arrangements under these General Terms and Conditions or the price
list.
  5.If any defects in the artwork are not immediately ascertainable but rather first become apparent during the printing process,
the customer has no claim in the event of unsatisfactory printing.
  6.The customer is liable for transmitted files being free of computer viruses. The Publisher may delete files with computer viruses without the customer being entitled to derive any claims from this. In addition, the Publisher reserves claims for
damages if the Publisher sustains additional damage due to computer viruses.
  7.Where the customer provides material (bound inserts, loose inserts, etc.), the Publisher gives no warranty for the accuracy
of the amounts or qualities designated as delivered.
§ 7 Liability
  1.The Publisher is liable for damages caused by willful misconduct or gross negligence, for damages from culpable injury to
life, body, or health, and for damages resulting from negligent breach of a duty that is of material importance for achieve-
SUMMARY OF THE survey method of the recipient structure
analysis (AMF Schema 2, No. 18
AND AMF-SCHEME 3-E, No. 19 TO 21)
1.Research method:
Distribution analysis in the form of a file analysis – total collection
2.Description of the recipients at the time of the data collection:
2.1Character of the file:
The recipient file includes the addresses of all the recipients. Due to the existing postal
information, the file can be sorted according to zip code or according to recipients from
Germany and abroad.
2.2 Total number of recipients in the file:
22,936
2.3 Total number of changing recipients:
11,844
2.4Recipient´s structure of an average edition according to sales structure:
– Paid circulation 658
Of these: Subscribed copies
560
Single purchase Others
98
– Free copies 12,826
Of these: Permanent free copies
622
Alternating free copies
11,844
Promotional free copies
360
ment of the contract purpose (cardinal duty). Other than with regard to liability for willful misconduct and culpable injury
to life, body, or health, the obligation to pay damages is limited to foreseeable damages that typically arise. In all other
respects, claims for damages against the Publisher are precluded, regardless of legal basis. If the Publisher’s liability is
precluded or limited under the aforementioned arrangements, this also applies to the personal liability of its employees,
representatives, or persons used to perform an obligation (Erfüllungsgehilfen). Liability under the German Product Liability
Act (Produkthaftungsgesetz) remains unaffected. Other than claims based on tort or willful misconduct, claims against the
Publisher for damages are prescribed 12 months following the date on which the customer learned or should have learned
of the circumstances establishing the claim.
  2.Temporary interruption of the advertisement publication occasioned by force majeure, strikes, lock-outs, or operational
disruptions does not constitute a release of contract. In such cases, the agreed placement period is extended accordingly,
unless the customer can show that later publication can no longer fulfil the purpose of the advertisement. The claim for
damages is precluded.
§ 8 Storage of customer data
In connection with its business relationships, the Publisher stores customer data by means of electronic data processing in
accordance with the statutory provisions of the German Federal Data Protection Act (Bundesdatenschutzgesetz).
§ 9 Place of performance, place of jurisdiction
  1.If any one or more of these General Terms and Conditions should be or become ineffective, all other provisions remain in full
force and effect. An ineffective provision is instead to be replaced by way of supplementary contract interpretation with an
arrangement that most closely approximates the economic purpose intended by the parties with the ineffective provision.
The same applies to the closing of any gaps herein.
  2.Amendments to the provisions of these General Terms and Conditions and waiver of the requirement of written/text form
must be made in writing.
  3.The law of the Federal Republic of Germany is applicable, under exclusion of the United Nations Convention on Contracts
for the International Sale of Goods and under exclusion of the principles of conflict of laws. The place of performance is
Gilching. The place of jurisdiction is Munich for lawsuits against merchants, legal persons under public law, or special funds
under public law.
Version: July 2015
Actual circulation 13,484
– Germany 12,687
– Abroad
797
3.Description of the survey:
3.1 Total circulation (analysed proportion):
Actual circulation 13,484 = 100 %
Of these not included in the analysis:
Promotional copies 360 = 2,67 %
The analysis represents
of the acutal dristibution (tvA): 13,124 = 97.33 %
3.2Date of the analysis: 16th July 2015
3.3Description of the survey´s base:
The survey is based on the total file. The distribution percentages were determined according to
the annual average total circulation in Germany and abroad in line with AMF, no. 17.
3.4 Target persons of the survey:
All recipients included in this analysis: Personal recipients in institutions (companies and plants).
3.5Definition of the reader: No data are available for this topic
3.6 Period of the analysis: 1st July 2014 – 30th June 2015
3.7Conduction of the analysis: Publisher
This survey meets the latest requirements of the ZAW framework for advertising media
analysis regarding structure, implementation and reporting.
Media kit
2016
contac
Henrich Publikationen GmbH, Talhofstraße 24 b, 82205 Gilching, Germany, Telephone +49 810 538 53-50, Fax +49 810 538 53-11, [email protected]
YOUR DIRECT LINE TO OUR TEAM:
Thomas Schumann
Advertising manager
Telephone: +49 810 538 53-42
Fax: +49 810 53853-11
Email:
[email protected]
Hedwig Unterhitzenberger
Editorial staff
Telephone: +49 810 538 53-86
Fax: +49 810 538 53-11
Email:
[email protected]
Hans-Georg Schätzl
Editor-in-chief
Telephone: +49 810 538 53-54
Fax: +49 810 538 53-11
Email:
[email protected]
Gerda Mietner
Advertising and
editorial assistant
Telephone: +49 810 538 53-56
Fax: +49 810 538 53-11
Email:
[email protected]
Susanne Martorana
Disposition
Telephone: +49 810 538 53-24
Fax:
+49 810 538 53-11
Email:
[email protected]
Media kit
2016
additional expenses
Henrich Publikationen GmbH, Talhofstraße 24 b, 82205 Gilching, Germany, Telephone +49 810 538 53-50, Fax +49 810 538 53-11, [email protected]
Sales Representatives Germany/Abroad
germany:
Baden-Wurttemberg
Hüller & Roloff Medienservice
Winnender Straße 54, 71334 Waiblingen,
Germany
Telephone: +49 715 192 22-0
Fax:
+49 715 192 22-60
Email:
[email protected]
Your contact: Peter Hüller, Lutz Roloff
Bavaria, Berlin, Brandenburg, Bremen,
Hamburg, Hesse, Lower Saxony, Mecklenburg-West Pomerania, North Rhine-Westphalia, Rhineland-Palatinate, Saarland,
Saxony, Saxony-Anhalt, Schleswig-Holstein, Thuringia
Henrich Publikationen
Talhofstraße 24b, 82205 Gilching, Germany
Telephone: +49 810 538 53-42
Fax:
+49 810 538 53-11
Email:
[email protected]
Your contact: Thomas Schumann
Abroad:
Switzerland
Rico Dormann
Media Consultant Marketing
Moosstrasse 7, postal address: Postfach 574
8803 Rüschlikon, Switzerland
Telephone: +41 447 208 550
Fax:
+41 447 211 474
Email:
[email protected]
Your contact: Rico Dormann
Italy
Quaini Pubblicità
Via Meloria 7, 20148 Milano, Italy
Telephone: +39 023 921 618 0
Fax:
+39 023 921 708 2
Email:
[email protected]
Internet:
www.quaini-pubblicita.it
Your contact: Graziella Quaini
BeNeLux, France, Great Britain, Austria,
Eastern Europe, North America, Scandinavia
Henrich Publikationen
Talhofstraße 24b, 82205 Gilching, Germany
Telephone: +49 810 538 53-42
Fax:
+49 810 538 53-11
Email:
[email protected]
Your contact: Thomas Schumann
Spain, Portugal, Latin America
Consulting Eckart May, SL Mediamarketing
Pza de Dugue de Medinaceli, 2-3° 1a
08002 Barcelona, Spain
Telephone: +34 934 126 292
Fax:
+49 321 212 507 38
Email:
[email protected]
Your contact: Eckart May
China, Singapore, Hong Kong, Taiwan
Ringier Trade Publishing Ltd.
Head Office, Unit 401-5, 4/F
New Victory House, 93-103 Wing Lok Street
Mike Hay, Hong Kong
Telephone: +852 236 9-878 8
Fax:
+852 286 9-59 19
Email:
[email protected]
Your contact: Mike Hay
Media kit
editorial
schedule
2016
Issue
Technology
Focus
T
Special
Permanent desks: People – Facts – Success – Viewpoint – Science – Products – Media
1
Review Blechexpo/Schweisstec
– innovations and interesting from the
fair at Stuttgart
February
Intra logistics
DOP:02/18/16
– warehouse systems
CD*:01/26/16
– feeder
ED: 01/18/16
– robots
FOKUS
METAV
Düsseldorf,
02/23–02/27/2016
From the rolling mill to the
press
– rolling and extruding
– coil handling, strip processing
lines
– longitudinal and transverse
separation, straightening
– moulding machines, tools
– high pressure forming,
GrindTec
Augsburg,
03/16–03/19/2016
Permanent desks: People – Facts – Success – Viewpoint – Science – Products – Media
2
Tubes and sections
– manufacturing
– shaping, bending, round chains
March
– fabrication, cutting to length
DOP:03/23/16 – processing, machining ends
CD*:02/29/16 – coating, refining
ED: 02/22/16 – warehousing
– semi-finished-products, tools
– testing engineering, plant design
Bending technology
– bending and folding
– tools, bent components
Fair issue
wire & TUBE
FOKUS
WIRE
– wire manufacturing
– bent components,
springs
– coating, refining
– tools
wire & Tube
Düsseldorf,
04/04–04/08/2016
Joining and cutting
– thermal joining and cutting
(welding, plasma, autogenous)
– mechanical joining and cutting TRADING
(screws, rivets, clinching, toxing – metal trading with
sawing, water jet cutting)
focus on pipes and
wire
– metal service center
Permanent desks: People – Facts – Success – Viewpoint – Science – Products – Media
3
Software
– CAD/CAE/CRM-systems
– machine and plant control
April
– production planning
DOP:04/18/16 – simulation
CD*:03/22/16
Quality in the company
ED: 03/15/16
– quality management
– measuring and testing engineering
– workplace, ergonomics
– air pollution control
– disposal, recycling
Fair issue
HMI/Control/SENSOR+TEST
FOKUS
Automation
– robots
– feeder, feeding systems
– safety engineering
– warehouse technology
FUTURE
– Industrie 4.0
– energy management
– light construction
– multimateriality
i-Quadrat Intelligente
Instandhaltung, 1/16
– retrofit
– energy efficiency
– software
– a. s. o.
HMI/Industrial
Automation/Digital
Factory
Hanover,
04/25–04/29/2016
Control
Stuttgart,
04/26–04/29/2016
SENSOR+TEST
Nuremberg,
05/10–05/12/2016
Permanent desks: People – Facts – Success – Viewpoint – Science – Products – Media
4
Surface technology
– baring, burring
– cleaning, coating, refining
May
– lubricating, oiling, marking
DOP:05/25/16 Cutting technology
CD*:04/28/16 – punching, perforation, notching
ED: 04/21/16 – cutting and precision cutting
– waterjet cutting
Semi-finished products
– hybrid components
Fair issue
LASYS/O&S/parts2clean
Stanztec
LASYS/O&S/
parts2clean
Stuttgart,
05/31–06/02/2016
FOKUS
Stanztec
Pforzheim,
06/21–06/23/2016
Laser technology
– sources
– machines and components
– welding, cutting, marking
Permanent desks: People – Facts – Success – Viewpoint – Science – Products – Media
5
Tubes and sections
– manufacturing
– shaping, bending, round chains
September
– fabrication, cutting to length
DOP:09/09/16 – processing, machining ends
CD*:08/17/16 – coating, refining
ED: 08/10/16 – warehousing
– semi-finished-products, tools
– testing engineering, plant design
Intra logistics
– warehouse systems
– feeder, feeding systems
– robots, automation
FOKUS
FUTURE
Waterjet cutting
– pump systems
– jet heads, nozzles
– machinery and equipment
– fluid technology, recycling
– light construction
– multimateriality
– Industrie 4.0
Thermal cutting
– plasma and flame cutting
i-Quadrat Intelligente
Instandhaltung, 2/16
– automation
– telemaintenance and
diagnosis
– cleaning
– remanufacturing
– plant availability
Permanent desks: People – Facts – Success – Viewpoint – Science – Products – Media
6
Strip processing lines
– coiler, coil-handling
– straightening, jars, knives
October
Metal forming
DOP:10/14/16 – moulding machines, drives
CD*:09/20/16 – high pressure forming, IHU
ED: 09/13/16 – extruding, pressure forming
– feeder, robots
Bending- and cutting technology
– punching, perforation, notching
– cutting and precision cutting
– bending and folding
Tools
– forming tools
– bending and folding tools
– clamping and holding down technology
Fair issue
EuroBLECH
FOKUS
Joining technology
– welding, soldeing
– screws, rivets
– toxing, clinching
– bonding
– hybrid technologies
TRADING
– metal trading with
focus on coils and
sheets / blanks
– metal service center
EuroBLECH
Hanover,
10/25–10/29/2016
Permanent desks: People – Facts – Success – Viewpoint – Science – Products – Media
7
Surface technology
– baring, burring
– cleaning, coating, refining
November
– lubricating, oiling, labeling
DOP:11/16/16 Wire
CD*:10/14/16 – manufacturing, refining
ED: 10/07/16 – bent components, springs
DOP= Date of publication; CD= Closing date; ED= Editorial deadline
Fair issue SPS/ALUMINIUM
FUTURE
FOKUS
– energy management
– drive technology
Materials
– Steels and stainless steels
– Light metals (Al, Mg)
– Hybrids, foams, composites
SPS/IPC/Drives
Nuremberg
11/22–11/24/2016
ALUMINIUM
Düsseldorf,
11/29–12/01/2016
* The delivery date for printing material is equivalent to the respective closing date for advertisements.
116. Jahrgang | Einzelpreis 10,– €
WWW.AUTOMATIONNET.DE
www.maschinewerkzeug.de
06
15
2/15
VIEL FREUDE
VIEL IN PETTO
VIEL OFFENHEIT
1.150 Aussteller auf
der diesjährigen Logimat. Da kommt bei
Messechef Peter Kazander Freude auf. 12
Mit klarem Blick in die
Zukunft: UnternehmensChef Winfried Schmuck
hat mit Bito-Lagertechnik noch viel vor.
50
Cemat-Projektleiter
Bernd Rohde gibt
freimütig über Berufliches wie auch über
Privates Auskunft. 74
01
IN
MASCHINEN
Mit Wasserstrahlanlagen von
Innomax erzielen Werkzeugbauer
saubere Ergebnisse. 16
Eine Familie und ihr
Unternehmen, Seite 14
WERKZEUGE
Spektakuläre Standwege ringt
das Technische F&E-Zentrum
dem Schneidenkiller GFK ab. 28
E
SIV
56. Jahrgang | 23 Euro
Heft 3 | Mai 2015
www.bbr.de
www.logistik-journal.de
Toni Räber, Geschäftsführer der AL-Cut AG:
»Der Byoptimizer von Bystronic
spart Material und Zeit.« 16
AUGUST
Die Schunks
KLU
Februar
2015
Dr. Christian Fröhling,
SMS Siemag:
»Potenzial zur Energierückgewinnung findet sich vor allem in
den Nebenprozessen.« 32
SONDERTEIL
Schweizer PräzisionsFertigungstechnik. 117
15,60 €
EURO 15,20
Februar 2015
AUSGABE MÄRZ 2015
SPECIAL
Logimat 2015
Die Erfolgsmesse am Stuttgarter
Flughafen freut sich über einen
Ausstellerrekord. Das Special zu der
Intralogistik-Show beginnt auf ...
Seite 12
Das Lager als
staplerfreie Zone
SSI Schäfer realisiert für den Automobilzulieferer
Brose eine intelligente und effiziente Routenzuglösung
Jahrgang 6 ® Ausgabe 02.2015 ® www.iquadrat-magazin.de
SPEZIAL
Retrofit
Instandhaltung
Jahrgang 6 ® Ausgabe 02.2015 ® www.iquadrat-magazin.de
Intelligente Instandhaltung
Im µ-Bereich
23
Magnos-Magnetspannplatten von Schunk gewährleisten auf Schweizer
Maschinen höchste Präzision bei der Bearbeitung. Seite 60
Moderne sicheresowie
Automatisierungslösungen
Automatisierungs- für die
Neu- und Weiterentwicklungen
lösungen
Pilz60 Seiten.
Fertigungsindustrie
aufvon
fast
schonen Ressourcen.
+ i-Quadrat
Ex
tr
a
HANNOVER MESSE
Jahrgang 6 ® Ausgabe 02.2015 ® www.iquadrat-magazin.de
Intelligente Instandhaltung
10
HARALD NEHRING
Intelligente
Der Igus-Prokurist gibt
Einblicke in die »kreative
Atmosphäre in der
Innovationsküche« des
Kölner Unternehmens.
Au
se tom
rie oti
M bis ve:
a s z vo
se ur n
nfe effi de
rti zie r K
gu n le
ng te inn
MEINUNG
MEUSBURGER – mehr als 13 000 Kunden aus dem Werkzeug-,
Formen- und Maschinenbau nutzen die Vorteile der Standardisierung.
Retrofit
Retrofit
Moderne sichere
Automatisierungslösungen von Pilz
schonen Ressourcen.
Moderne sichere
Automatisierungslösungen von Pilz
schonen Ressourcen.
+ i-Quadrat
INT ERVIEW
>14
Martin Greif von Bachmann
eletronic über das neue FlottenManagament-System.
MANAGEMENT
>18
Škoda Auto setzt beim Asset
Management auf die Kompetenz
von Siemens.
MARKT
>24
INT ERVIEW
>14
MANAGEMENT
Martin Greif von Bachmann
eletronic über das neue FlottenManagament-System.
www.energiespektrum.de
WWW.K-MAGAZIN.DE
HEFT 06 SEPTEMBER 2015
€12,80
>18
Škoda Auto setzt beim Asset
Management auf die Kompetenz
von Siemens.
MARKT
Pünktlich zur Control
erscheint der Sonderteil über Messen,
Prüfen und
Qualitätssicherung
Organ des IBU Industrieverband Blechumformung
Moderne sichere
Automatisierungslösungen von Pilz
schonen Ressourcen.
+ i-Quadrat
>24
INT ERVIEW
Dank SKF konnten in der
Papierfabrik Grigiškes ungeplante
Stillstände reduziert werden.
>14
Martin Greif von Bachmann
eletronic über das neue FlottenManagament-System.
02 2015
Intelligente Instandhaltung
FOKUS
in der bbr.
Retrofit
Seite 45
+ i-Quadrat
Dank SKF konnten in der
Papierfabrik Grigiškes ungeplante
Stillstände reduziert werden.
Jahrgang 6 ® Ausgabe 02.2015 ® www.iquadrat-magazin.de
Ein zuverlässiger
Partner
Euro 14,40 | Heft 1 Februar 2015 | www.guh-elektro.de
MANAGEMENT
>18
Škoda Auto setzt beim Asset
Management auf die Kompetenz
von Siemens.
>24
MARKT
Dank SKF konnten in der
Papierfabrik Grigiškes ungeplante
Stillstände reduziert werden.
INT ERVIEW
>14
Martin Greif von Bachmann
eletronic über das neue FlottenManagament-System.
MANAGEMENT
>18
Škoda Auto setzt beim Asset
Management auf die Kompetenz
von Siemens.
MARKT
>24
Dank SKF konnten in der
Papierfabrik Grigiškes ungeplante
Stillstände reduziert werden.
INNOVATION JETZT!
30. Jahrgang
17,20 Euro
SPEZIAL
EN,
10 SEITEN SENSOR
SCHALTGERÄTE
SOFTWARE,
SEITE 35
SMART METER
22
Rainer Baake vom Bundeswirtschaftsministerium über
das Eckpunktepapier zum
Thema ›Intelligente Netze‹.
MARKTDESIGN
60
Wolfgang Anzengruber
Der Verbund-Chef spricht sich
im Interview für eine Reform
des CO2-Marktes aus.
Heft 1 | Februar 2015
STECHNIK
SICHERHEIT
62
SERVICES
Jan-Christoph-Maiwaldt von
Urbana/Kalorimeta über
dezentrale Energiekonzepte
für die Wohnungswirtschaft.
Dezentralität
Hannover Messe zeigt Stand der Technik
für intelligente Erzeugung vor Ort
Jahrgang 6 ® Ausgabe 02.2015 ® www.iquadrat-magazin.de
ZUKUNFT
SCHON HEUTE
Intelligente Instandhaltung
SPEZIAL
KOMMUNIKATIONSTECHNIK – Die Geräte von
HMS dienen als Fundament für die Industrie 4.0
und bieten Anwendern eine zukunftsfähige
Datenkommunikation für die Automatisierung.
29
SPEICHER &
& ERNEUERBARE
V Erzeugung und
»Genial einfach
automatisieren«
Siemens: Josef Ploch über die vielfältigen
Einsatzmöglichkeiten der neuen Logo-Generation
R+T SPEZIAL Hochwertiges
Angebot für Architekten, Planer
und Installateure der Branchen.
Last austarieren
Retrofit
mit Li-Ionen-Akkus
30
PHILIPS Modernste LED/
OLED-Technik für das „Wunder
von Bern“ in Hamburg.
Euro 14,00 | D45646 | Themenheft 1/2010
Innovation jetzt!
www.guh-elektro.de
NEWS 06 Bau 2011: Jung als Partner der Architekten TECHNIK 21 Was lange währt wird
richtig gut – Jung-Türkommunikation THEMEN 44 Richtige Software erleichtert den Arbeitsalltag TALK 46
g+h im Gespräch mit der Jung-Geschäftsführung TEST 54 TKM-Praxisworkshop für Inbetriebnahme-Tool
42
DIE SIEGER Der „Große
Preis der Branche“ – wie g+h
Innovationspreisträger feiern.
50
Moderne sichere
Automatisierungslösungen von Pilz
schonen Ressourcen.
+ i-Quadrat
INT ERVIEW
>14
Martin Greif von Bachmann
eletronic über das neue FlottenManagament-System.
MANAGEMENT
>18
Škoda Auto setzt beim Asset
Management auf die Kompetenz
von Siemens.
MARKT
>24
Dank SKF konnten in der
Papierfabrik Grigiškes ungeplante
Stillstände reduziert werden.
+ Special-Interest
publications
Nachhaltigkeit
und Innovation
Standpunkte und Perspektiven:
Michael Eyrich – Martin Herms – Harald Jung
Henrich Publikationen GmbH
Talhofstraße 24 b
82205 Gilching, Germany
Telephone: +49 810 538 53-0
Fax: +49 810 538 53-11
Email: [email protected]