Forklift Tipping Bins - East West Engineering

Transcription

1
2
3
4
5
6
7-8
9-15
16
17-28
29-32
33-34
35
36
37-38
39
40
40
FORWARD BULK BIN TIPPERS
Forklift Bulk Bin Tippers
Floor Mounted Bulk Bin Tippers
41-42
43
CRANE AND OVERHEAD LIFTING
Work Platform Cages
Brick Cages & Goods Cages
Gas Cylinder Cages
Concrete Kibbles
Grout Kibbles
Concrete Collection Tray
Pallet Hooks
Drum Handling
Spreader Beams
Bulk Bag Handling 44-47
48-49
50-52
53-54
55
55
56-57
58
59
60
QUICKHITCH & TELEHANDLER
Jib Attachments
Work Platforms
Floating Carriages
Universal Fork Carriage
61
62
62
63
WASTE & STORAGE BINS
Forklift Tipping Bins
Drop Bottom Bins
Hopper Bins
Crane Bins
64-74
75
76
77-80
DRUM STORAGE SYSTEMS
Spill Bins
81-82
STORAGE CAGES / TROLLEYS / PALLETS
Stillage Cages
Pallet Cages
Collapsible Mesh Storage Cages
Goods Trolleys
Storage Boxes
83-84
85-87
88
89
90
table of CONTENTS
Hydraulic Push-off Attachment
Hydraulic 360 Degree Rotator
Hydraulic Bale Clamp
Grab Attachment
Hydraulic Extension Reach Forks
Roller Forks
Dirt Buckets
Drum Handling
Wheelie Bin Tippers
Jib Attachments
Work Platforms & Goods Cages
Container Access Ramps
Fork Extension Slippers
Fork Spreaders
Roll Prongs
Fork Tines
Carriage Bar
Tarp Spreader
STNETNOC fo elbat
FORKLIFT ATTACHMENTS
Hydraulic Push-Off
Forklift Attachments
Type TPO-3 Push-off
The TPO3 Push-Off is ideally suited to the delivery of
turf and landscape supplies where immediate retrieval
of pallets is required. Used in conjunction with smooth
top pallets, the hydraulically operated Push-Off is used to
push the product from the pallet. One hydraulic function
is required. The Push-Off is simple to operate with a
smooth & efficient operation. Enamel paint finish.
• Maximum operating pressure:
160 bar
• Maximum hydraulic flow:
30 litres/min
• Opening Range:
1210 mm
• Unit Weight:
110 kg
• Lost Load of 50mm (from front face of fork tines)
• Available to suit ISO/FEM “A” or “B” mount
Type TPO-3B
1
360° Rotator
Type XZQ 360 Degree Rotators
East West Engineering’s range of 360 Rotators increases
forklift functionality by enabling the operator to rotate
loads and empty bins, while retaining the ability to handle
palletised and conventional loads.
East West Engineering can supply all sizes and capacities
upon request.
• Continuous rotation in both directions
• Concealed drive motor protected from potential damage
• Designed to accept standard ISO fork arms
• Excellent driver visibility
• Quick Hitch available on request
*tines not included
Frame Width
Minimum Truck
Carriage Width
Weight
Lost Load
Horizontal Centre
of Gravity
Model
Capacity @Load
Centre
Mounting Class
*tines not included
kg@mm
mm
mm
kg
mm
mm
XZQ20E-B002
II
2000/500
1115
800
311
160
88
XZQ30D-C001
III
3000/500
1100
800
378
228
145
XZQ45D-C001
III
4500/600
1200
1016
489
178
123
XZQ60E-D001
IV
6000/600
1200
1016
577
235
143
2
Hydraulic Bale Clamp
Type RBC Bale Clamp
East West Engineering’s range of Bale Clamps enable forklift operator
to clamp unpaletised loads.
The Bale Clamp’s opening range can be designed to suit multiple
load sizes.
East West Engineering can supply all sizes and capacities upon
request.
• Independent Sideshift
• Maximum residual capacity due to minimum weight and lost load
• Robust Design
• Cylinder protection to prevent damage
• Excellent visibility
3
mm mm kg mm
415 1185 401 127
460 750 680 150
460 1181 640 150
Horizontal Centre
of Graity
Lost Load
mm
450-1730
490-2300
545-1890
Weight
Opening Range
kg@mm
1900@500
2200@500
2700@500
Arm Length
Capacity @Load
Centre
II
III
III
mm
1040
1600
1015
Arm Height
Frame Width
Model
RBC19D-B002
RBC22D-C004
RBC27D-C004
Mounting Class
• Easy Installation
mm
401
180
358
Grab Attachments
Type GA Grab Attachment
The GA Grab Attachment is a slip on attachment
designed to grab and securely transport poles or
pipes, with models available to handle from 170mm
through to 1200mm diameter.
Fully opened position
Requiring one additional hydraulic function, the GA Grab
Attachment is supplied with connection hoses fitted with quick
connect couplings. Enamel painted finish in Safety Yellow.
Fully closed position
Type
GA-06
GA-09
GA-12
Type
GA-06
GA-09
GA-12
SPECIFICATIONS
SWL (kg)
L/Centre (mm)
Weight (kg)
HCG (mm)
VCG (mm)
2500
2500
2500
1100
950
1300
245
265
375
600
420
580
210
300
455
DIMENSION (mm)
‘A’
‘B’
‘C’
‘D’
‘E’
741
966
1366
800
500
700
1300
1300
1800
600
900
1200
170
170
300
4
Hydraulic Extension Reachforks
Type RG Reachforks
Reachforks are hydraulically extendable and retractable
forks which allow for ‘double-deep’ stacking, increasing
warehouse capacity by up to 30% compared to ‘singledeep’ warehouse operations.
Reachforks also allow trucks to be loaded & unloaded from
one side eliminating the need to turn the vehicle or drive
the forklift to the opposite side making the operation much
safer. To operate the reachforks, the forklift requires one
additional hydraulic function.
Options available:
Reachforks Retracted
• Pallet Stops - preventing the reachforks from
protruding through to the rear pallet
• Load Guards - custom made to suit if required
Reachforks Extended
Length
“L” (mm)
Extension
”K” (mm)
Cross Section
“D” x “S”
(mm)
SWL at
600mm Load
Centre (kg)
Weight
Per Pair
(kg)
ISO/FEM
Mounting
Class
RG2 30 1100 / 750
1100
750
140 x 56
3000
165
Class 2
RG2 30 1200 / 850
1200
850
140 x 56
3000
175
Class 2
RG2 30 1350 / 1000
1350
1000
140 x 56
3000
190
Class 2
RG4 25 1100 / 750
1100
750
170 x 56
2500
175
Class 2
RG4 25 1200 / 850
1200
850
170 x 56
2500
185
Class 2
RG4 25 1350 / 1000
1350
1000
170 x 56
2500
200
Class 2
RG4 35 1200 / 850
1200
850
170 x 56
3500
210
Class 2 / 3
RG4 35 1350 / 1000
1350
1000
170 x 56
3500
230
Class 2 / 3
RG4 45 1200 / 850
1200
850
170 x 56
4500
215
Class 3
RG4 45 1350 / 1000
1350
1000
170 x 56
4500
235
Class 3
Type
To ensure correct selection of reachforks, please contact East West Engineering to discuss your particular application and specifications.
5
Roller Forks
Type RFC Roller Forks
Perfect for container loading, Roller Forks allow for products
such as bulk bags, cartons, and other bagged products to be
transported and loaded using slip sheets, eliminating the use
of pallets. Able to be fitted easily to most forklifts, with no
additional hydraulics required. Simply replace the existing fork
tines on the truck with the Roller Forks.
Fitted with an ingenious roller design, these forks
simply roll under the slip sheet. Once the goods are
lifted, the rollers are retracted, ensuring the load is
securely positioned.
Type
SWL (kg)
per pair
at 500mm
L/C
“L”
Length
(mm)
“W”
Width
(mm)
“C”
Thickness
(mm)
Hor
CoG
(mm)
Weight
Per pair
(kg)
ISO/FEM
Mounting
Class
RFC 20-1100
2000
1100
210
60
337
147
Class 2
6
Dirt Buckets
Type DBHS2 Dirt Bucket
The DBHS Hydraulic Dirt Bucket is a slip-on attachment
allowing quick connection to the forklift with the use of “Quick
Connect” hydraulic couplings.
The hydraulic operation allows for full backwards tilt making the
bucket suitable for liquid products. This bucket is manufactured
with a hardened steel wear edge.
Zinc finish.
• Fork Pocket Size:
185 mm x 65 mm
• Fork Pocket Centres:
750 mm
• Safe Working Load:
1000 kg
Type
Capacity
(cu. m)
Bucket
Width
(mm)
Unit
Weight
(kg)
DBHS2-12
0.50
1200
290
DBHS2-18
0.90
1800
366
TYPE
DBHS2-12
DBHS2-12
POCKET SIZE
185 x 65
185 x 65
POCKET CTS
750mm
750mm
SWL
1000kg
1000kg
UNIT WEIGHT
290kg
366kg
HOR C of G
1050mm
1120mm
VERT C of G
165mm
140mm
CAPACITY
0.50 cu m
0.90 cu m
7
Dirt Buckets
Type DB-M Manual Bucket
This manually operated slip-on dirt bucket connects quickly to the forklift without any hydraulic connection required.
Extremely useful for removing loose material from floors such as gravel, grain, coal etc. Dumping of product is via a simple
mechanical lever operated from the drivers seat. Bucket is fitted with a hardened steel wear edge. Zinc finish.
• Volume Capacity:
0.22 cu m
500 kg
• Bucket Width:
1200 mm
185 mm x 65 mm
635 mm
• Unit Weight:
218 kg
8
Drum Handling
Type SDLC1 Drum Lifter
Designed for standard 205 litre steel drums, the fully automatic
clamping action enables safe and precise placement of drums
without the operator having to leave the drivers seat. The
drum is gripped by pushing the arms against the drum centre
and driving forward with the forklift. The arms will engage
around the drum and lock under the rolling hoop when raised.
To release, lower the drum onto ground and continue to
lower the forks whilst reversing the forklift. Zinc finish.
Type
SDLC1
No. of
Drums
1
SWL
(kg)
500
Fork Pocket
Centres (mm)
420
Fork Pocket
Size (mm)
185 x 60
9
Load Centre
(mm)
1375
Unit Weight
(kg)
100
Drum Handling
Type BGN Drum Lifter
Drum handling made easy. A good field of vision
allows the operator to continually observe the
drums being handled. The operator does not
leave the drivers seat. The unique beak design
provides a high clamping force, even when
travelling over uneven ground.
Suitable for standard 205 litre steel and plastic
drums, and available as a single or a two drum
unit. A contoured rest acts at a point low enough
down the drum to prevent damage to the drum
and its labelling. Zinc finish.
BGN 1
Type
No. of
Drums
SWL
(kg)
Fork Pocket
Centres (mm)
Fork Pocket
Size (mm)
Load Centre
(mm)
Unit
Weight
(kg)
BGN 1
1
1000
250
185 x 60
1210
72
BGN 2
2
1500
600
185 x 60
1250
95
Beak Grab
Contoured Drum Rest
BGN 1
BGN 2
10
Drum Handling
Type DL1000 Drum Lifter
The DL1000 is the safest drum lifter available, with
the drum being transported with 100% security.
The drum is secured by a chain belly strap which
is operated by an eccentric lock, which is then also
secured by an additional securing pin. Zinc finish.
• Safe Working Load: 1000 kg
• Unit Weight:
65 kg
• Load Centre:
1160 mm
• Fork Pocket Size: 185 mm x 65 mm
335 mm
Type DC-T Drum Rotator
A fast and economical solution to emptying 205 litre
drums. This unit is ideal for scrap and waste products.
A chain belly strap with an eccentric lock secures
the drum firmly in position. To release the drum the
operator pulls the draw chord from the drivers seat.
Enamel paint finish.
11
500 kg
• Unit Weight:
108 kg
• Rotation: 180 degrees
• Load Centre: 1040 mm
185 mm x 65 mm
850 mm
Drum Handling
Type DR-NH Drum Rotator
The DR-NH Drum Rotator is designed to lift and rotate
205 litre drums through 360 degrees. The drum is
secured into the attachment with a locking belly strap.
The rotation of the drum is done via a handle operated
gearbox using minimum effort, allowing complete and
controlled tipping. Zinc finish.
500 kg
185 mm x 65 mm
• Fork Pocket Centres: 845 mm
• Load Centre:
930 mm
• Unit Weight:
100 kg
Type DR-NC Drum Rotator
The DR-NC is fitted with chain operation to allow
for drum rotation when lifted above chest height
of the operator. Zinc finish.
12
500 kg
185 mm x 65 mm
• Load Centre:
930 mm
• Unit Weight:
110 kg
Drum Handling
Type DRW-NH Drum Rotator
The DRW-NH Drum Rotator is designed to lift and rotate 205 litre
drums through 360 degrees, and is ideal for long reach situations. It
is also ideal for narrow carriage width forklifts where the fork tines
cannot be positioned far enough apart for a standard DR-NH unit.
Zinc finish.
500 kg
185 mm x 65 mm
• Load Centre:
1640 mm
• Unit Weight:
130 kg
Type DRW-NC Drum Rotator
Fitted with the chain operation, the DRW-NC allows for
drum rotation when drum is lifted above chest height.
Zinc finish.
Same specifications as DRW-NH
• Unit Weight:
140 kg
Type SW-NH Drum Rotator
The SW-NH is designed to lift and rotate steel 205 litre drums
sideways to the direction of the forklift. The 360 degree rotation of the
drum is via a handle operated reduction gearbox. Enamel paint finish.
• Load Centre:
1385 mm
400 mm
• Unit Weight:
110 kg
Type SW-NC Drum Rotator
The SW-NC is fitted with chain operation to allow for drum rotation
when lifted above chest height. Enamel paint finish.
Same specifications as SW-NH
• Unit Weight:
120 kg
13
Drum Handling
Type DC-R2 Drum Rotator
The DC-R2 Hydraulic Drum Rotator is a heavy duty
rotator designed to lift and rotate 205 litre steel drums.
A chain belly strap holds the drum firmly in position,
whilst the rotation is provided by the forklift hydraulics.
One hydraulic function required. Enamel paint finish.
1000 kg
185 mm x 65 mm
874 mm
• Unit Weight:
135 kg
• Load Centre
1050 mm
• Rotation:
130 degrees
Type PBO Plastic Barrel Option
By replacing the standard belly strap, the PBO option will
allow for plastic drums and barrels, as well as standard
steel drums to be handled. The dual woven and chain
combination belly straps hold the drum or barrel firmly in
position.
Attachments which can be fitted with the
PBO option include:
• DR-NH
• DR-NC
• CDR-500
• DRW-NH
• DRW-NC
• DL1000
• SW-NH
• SW-NC
• DC-R2
Note: When PBO Option is fitted the Safe Working Load is
reduced to 350kg.
DC-R2 + PBO
DR-NC + PBO
DR-NC + PBO
14
Drum Handling
Type DC-GR2 Drum Rotator
The DC-GR2 Hydraulic Drum Rotator is a heavy duty 205
litre drum lifter with hydraulic grab & 130 degree rotation
ability. With 1 tonne lift capacity, this attachment is ideal
for the recycling industry and for mining applications.
This lifter is able to pick a single drum from a pallet of 4
without disturbing the other 3 drums. This unit is fitted
with quick connect couplings for connection to the 3rd
and 4th forklift hydraulic valves. Enamel paint finish.
1000 kg
• Load Centre:
1310 mm
884 mm
• Unit Weight:
175 kg
Type DC-GR2 / EFD
A 12 volt electric flow diverter is fitted to this unit for use
on forklifts where only one additional valve is available.
This flow diverter splits the hydraulic oil flow to either the
grab or rotate function of the attachment.
To activate the flow diverter, the forklift must be fitted
with a push button switch mounted in the cabin, and the
control wiring extending to the carriage for connection to
the flow diverter.
Unit weight 180kg.
Type DC-GR2 / HPP
The DC-GR2/HPP is fitted with a self contained battery
/ electric operated hydraulic power pack, eliminating the
need to connect to the hydraulic system of the forklift.
This self contained unit includes a 12 volt hydraulic pump,
battery and battery charger unit. Operation of the HPP
unit is via pendant control, allowing the forklift driver to
operate the attachment from the drivers seat.
Unit weight 295kg.
15
Wheelie Bin Tippers
Type NWB-T Wheelie Bin Tipper
Suitable for emptying 240 litre wheelie bins. The bin is wheeled
into the tipper and secured with safety chains. The 180 degree
tipping operation is simple and safe with the operator never having
to leave the seat during the tipping cycle. Enamel paint finish.
NWB-T2
NWB-T1 Tipped
Type
No. of
bins
SWL
(kg)
Fork Pocket
Size (mm)
Fork pocket
centres (mm)
Load Centre
(mm)
Unit
Weight (kg)
NWB-T1
1 x 240 litre
500
165 x 65
310
1200
100
NWB-T2
2 x 240 litre
1000
165 x 65
310
1200
150
Type WB Wheelie Bin Tipper
With two models available, one for 240 litre and
another for 660 litre wheelie bins, the WB style tipper
is operated from the forklift drivers seat by pull-cord.
The bin is secured in the wheelie bin cradle with safety
chains. Enamel paint finish.
WB-240
WB-240 Tipped
WB-660
Type
No. of bins
SWL
(kg)
Fork Pocket
Size (mm)
Fork pocket
centres (mm)
Load Centre
(mm)
Unit
Weight (kg)
WB-240
1 x 240 litre
500
165 x 65
840
1000
100
WB-660
1 x 660 litre
500
165 x 65
510
1700
140
16
Jib Attachments
Type FJCS25 Fixed Jib Short - 2.5 Tonne
The FJCS25 Fixed Jib allows for additional lifting height with the
extension beam being raised above the fork pockets. The overall
length when retracted is 1.3 metres, and when extended is 2
metres. Zinc finish.
2500 kg Max
185 mm x 65 mm
• Unit Weight:
100 kg
Safe Working Load (SWL) per position
POSITION
1
2
3
4
EXTENSION (mm)
790
1200
1580
1960
SWL (kg)
2500
1200
900
750
Type FJCL25 Fixed Jib Long - 2.5 Tonne
The FJCL25 has a 3.5 metre extension which allows for long
reach lifts. The overall jib length when retracted is 2.1 metres.
Zinc finish.
• Safe Working Load: 2500 kg Max
275 mm
• Unit Weight:
130 kg
POSITION
1
2
3
4
5
6
7
8
EXTENSION (mm)
950
1410
1870
2000
2380
2760
3140
3520
SWL (kg)
2500
2500
1900
1650
1250
650
380
240
17
Jib Attachments
Type FJCS45 Fixed Jib Short - 4.5 Tonne
The FJCS45 Fixed Jib is designed as an affordable general purpose
jib able to manoeuvre in confined spaces, with a 1.9 metre reach
when fully extended. The overall jib length when closed is 1.25
4500 kg Max
185 mm x 65 mm
290 mm
• Unit Weight:
95 kg
POSITION
EXTENSION (mm)
SWL (kg)
1
2
670
4500
1165
2900
3
4
1545
1300
1925
750
Type FJCL45 Fixed Jib Long - 4.5 Tonne
The FJCL45 Fixed Jib has a 3.5 metre reach when fully extended.
Overall length when closed is 2.0 metres. Zinc finish.
POSITION
EXTENSION mm)
SWL (kg)
4500 kg Max
290 mm
• Unit Weight:
140 kg
1
2
3
4
870
1945
2325
2705
4500
1300
750
560
18
5
3085
380
6
3465
200
Jib Attachments
Type FJCS50 Fixed Jib Short - 5 Tonne
The FJCS50 Fixed Jib has a 1.96 metre reach when fully
extended, and an overall length of 1.3 metres when retracted.
The jib is secured to the forklift by a safety chain. Zinc finish.
4750 kg Max
185 mm x 75 mm
• Unit Weight:
130 kg
POSITION
EXTENSION (mm)
SWL (kg)
1
2
780
4750
1200
2400
3
4
1580
1800
1960
1500
Type FJCL50 Fixed Jib Long - 5 Tonne
The FJCL50 Fixed Jib has a 3.5 metre reach when fully
extended, and an overall jib length when retracted of 2.1
POSITION
EXTENSION (mm)
SWL (kg)
4750 kg Max
185 mm x 75 mm
• Unit Weight: 170 kg
1
2
3
4
5
935
1395
1855
2000
2380
4750
4275
3800
3300
2500
19
6
2760
1300
7
3140
760
8
3520
480
Jib Attachments
SFJS7.5 Fixed Jib Short - 7.5 Tonne
A general purpose jib suitable for larger forklifts, the SFJS7.5
is fitted with wide pocket centres, also suited for forklifts
fitted with special hydraulic tine positioners. Overall jib
length when retracted is 1.39 metres. Zinc finish.
7500 kg Max
180 mm x 80 mm
875 mm
• Unit Weight:
320 kg
POSITION
EXTENSION (mm)
SWL (kg)
1
2
930
7500
1245
3600
3
4
1625
2700
2005
2250
SFJL7.5 Fixed Jib Long - 7.5 Tonne
The SFJL7.5 Fixed Jib has a 3.56 metre reach when fully
extended. The overall jib length when closed is 2.19 metres.
This jib is also fitted with wide fork pocket centres. Zinc
finish.
POSITION
EXTENSION (mm)
SWL (kg)
7500 kg Max
180 mm x 80 mm
875 mm
• Unit Weight:
450 kg
1
2
3
4
5
920
1380
1805
2045
2425
7500
6410
5700
4950
3750
20
6
2805
1950
7
3185
1140
8
3565
720
Jib Attachments
SFJCS100 Fixed Jib Short - 10 Tonne
The SFJCS100 Fixed Jib is the largest capacity jib in the range. Fitted
with wide pocket centres, this jib is also for forklifts fitted with special
hydraulic tine positioners. Maximum extension is 2 metres, with the
overall jib length when retracted of 1.39 metres. Zinc finish.
9,500 kg Max
230 mm x 110 mm
875 mm
• Unit Weight:
400 kg
POSITION
EXTENSION (mm)
SWL (kg)
1
2
930
1245
9,500
4800
3
1625
3600
4
2005
3000
SFJCL100 Fixed Jib Long - 10 Tonne
This jib has a 3.56 metre reach when fully extended, and
is also fitted with wide fork pocket centres. The overall
jib length when closed is 2.19 metres. Zinc finish.
9,500 kg Max
230 mm x 110 mm
875 mm
• Unit Weight:
515 kg
POSITION
EXTENSION (mm)
SWL (kg)
1
2
3
4
5
920
1380
1805
2045
2425
9,500
8550
7600
6600
5000
21
6
2805
2600
7
3185
1520
8
3565
960
Jib Attachments
Type TJCS25 Tilt Jib Short - 2.5 Tonne
The TJCS25 Tilting Jib allows for additional height, compensating for length
of the hook and slings when lifting. The jib boom can be set at 3 angled
positions as well as level. Jib also offers 5 different hook positions, with a 2
metre maximum reach. Zinc finish.
2500 kg Max
185 mm x 65 mm
362 mm
• Unit Weight:
130 kg
POSITION
1
2
3
4
5
EXTENSION
825 1125 1260 1640 2020
(mm)
SWL (kg)
2500 1800 1200 900
750
Type TJCL25 Tilt Jib Long - 2.5 Tonne
With a maximum reach of 3.58 metres and an additional height of 2.4
metres when fully extended, the TJCL25 is extremely versatile. 8 hook
positions available, as well as 3 different angle positions. Zinc finish.
2500 kg Max
185 mm x 65 mm
362 mm
• Unit Weight:
180 kg
POSITION
1
2
3
4
5
6
7
8
EXTENSION
1005 1465 1925 2060 2440 2820 3200 3580
(mm)
SWL (kg)
2500 2500 1900 1650 1250 650 380 240
22
Jib Attachments
Type TJCL45 Tilting Jib Long - 4.5 Tonne
The TJCL45 Tilt Jib is one of the most versatile forklift jib attachments
in our range, allowing extra height to 2.23 metres, with a 3.53 metre
reach when fully extended. This slip-on attachment is held to the
forklift by a safety chain. The overall jib length when closed is 2.1
4500 kg Max
185 mm x 65 mm
• Pocket Centres:
322 mm
• Unit Weight:
190 kg
POSITION
EXTENSION (mm)
SWL (kg)
1
2
3
4
770
2010
2390
2770
4500
1100
630
470
Level position
5
3150
300
6
3530
150
Tilted position
23
Jib Attachments
Type TJS5 Tilting Jib Short - 5 Tonne
The TJS5 Tilting Jib can be set at 3 angled positions as well as level. Jib
also offers 5 different hook positions, with a 2 metre maximum reach.
Zinc finish.
4750 kg Max
185 mm x 75 mm
370 mm
• Unit Weight:
180 kg
POSITION
1
2
3
4
5
EXTENSION
820 1120 1270 1650 2030
(mm)
SWL (kg)
4750 3600 2400 1800 1500
Type TJL5 Tilting Jib Long - 5 Tonne
With a maximum reach of 3.6 metres and an additional height of 2.4
metres when fully extended, the TJL5 is extremely versatile. 8 hook
positions available, as well as 3 different angle positions. Zinc finish.
4750 kg Max
185 mm x 75 mm
370 mm
• Unit Weight:
240 kg
POSITION
1
2
3
4
5
6
7
8
EXTENSION
1000 1460 1920 2070 2450 2830 3210 3590
(mm)
SWL (kg)
4750 4275 3800 3300 2500 1300 760 480
24
Jib Attachments
Wide Fork Pocket “S” series jibs
These jibs are fitted with the fork pocket centres set at
a wider measurement than the standard range. Whilst
they can be used on standard forklifts, these jibs are
manufactured to suit forklifts which cannot position the fork
tines for the standard range of jibs, such as forklifts fitted
with special hydraulic fork positioners. The wide pocket
option is available on all 2.5 tonne and 5 tonne jibs.
Note: All 7.5 tonne and 10 tonne jibs are
manufactured with wide pockets as standard.
(Refer to pages 20-21 for details)
Type SFJS
Type STJL
Type
Type SFJL
Pocket Size (mm)
Pocket Centres (mm)
Overall Width (mm)
Unit Weight (kg)
SFJS 2.5
SFJL 2.5
SFJS 5
SFJL 5
185 x 65
185 x 65
185 x 75
185 x 75
740
740
875
875
940
940
1075
1075
125
155
160
200
STJS 2.5
STJL 2.5
STJS 5
STJL 5
185 x 65
185 x 65
185 x 75
185 x 75
740
740
875
875
940
940
1075
1075
160
205
210
270
The information outlined in the above table is for the “S” wide pocket version of the standard range of
2.5 tonne and 5 tonne jibs. Only the pocket spacing, overall width and weight varies from the standard
attachment. Please refer to standard model specifications for Safe Working Load (SWL) information.
25
Jib Attachments
Type SJ2 Jib
Simple slip on jib attachment, suitable for most forklifts.
Two lifting points available, and supplied with one safety
swivel hook. Zinc finish.
2000 kg
185 mm x 65 mm
300 mm
• Unit Weight:
65 kg
Type SJW Wide Pocket Jib
The SJW style jib is fitted with wide spaced fork pockets,
and provides 2 lifting positions 550 mm apart. This is a
simple slip on style jib, and is supplied with safety swivel
hook. Zinc finish.
Type
SJW 2.5
SJW 4.5
SJW 7
SJW II
SWL (kg) /
550mm
2500
4500
7000
11,000
SWL (kg) /
1100mm
1500
3000
5000
8000
Fork pocket
size (mm)
180 x 65
180 x 75
180 x 80
230 x 110
26
Fork Pocket
Centres (mm)
715
875
875
875
Unit weight
(kg)
90
110
210
260
Jib Attachments
Type SBJ6 Battery Removal Jib
This jib is used for the removal and placement of battery
packs into electric operated forklifts. Supplied with
multiple lifting points and supplied with 4 slings, this unit
can be used for both 2 point and 4 point lift battery
packs. Zinc finish.
4 Point lift
2 Point lift
2000 kg
• Unit Weight:
78 kg
• Load Centre:
634 mm
185 x 65 mm
278 mm
• Hook Centres:
560 mm x 916 mm
Type GNJ Carriage
Mounted Jib
The GNJ Carriage Mounted Jib is a
heavy duty carriage mounted jib that
offers height and manoeuvrability. This
jib mounts to a standard forklift carriage
and comes with an optional support stand
upon request. Enamel paint finish.
Optional Stand
Type
GNJ 2.5
GNJ 4.5
GNJ 6
Mounting Class
Class 2
Class 3
Class 4
SWL (kg) /
600mm
2500
4500
6000
SWL (kg) /
900mm
2000
3500
5000
27
SWL (kg) /
1200mm
1500
2500
4000
Unit weight
(kg)
130
150
170
Jib Attachments
Type BJFL-1 Bulk Bag Jib
Slip on jib attachment which is suitable for handling bulk bags.
The jib is fitted with safety swivel hooks, providing complete
security when transporting bags. Enamel paint finish.
2000 kg
• Unit Weight:
78 kg
• Load Centre:
700 mm
• Hook Centres:
900 mm
185 mm x 85 mm
Type BBP 2000 Bulk Bag Jib
A two prong bag lifter ideal for container
loading. The operator is not required to leave
the drivers seat to release the bag. Optional
stand available. Enamel paint finish.
Optional Stand
2000 kg
• Load Centre:
600 mm
• Prong Centres:
800 mm
• Height above Carriage:
380 mm
• Unit Weight:
175 kg
• Mounting Class:
Class 2
28
* Class 3 available on request
Flatpack Work Platforms for on-site assembly
Type WP-N Work Platform
The WP-N Work Platform has been designed for forklift use to
safely carry out tasks of “short duration” and “occasional usage”
such as for maintenance. Manufactured strictly in accordance with
Australian Standard AS 2359.1, the type WP-N Work Platform
is suitable for a maximum of two people. Supplied with slipper
locking pins, tool tray, and 2 harness anchor points.
Unit is supplied standard as a ”Flatpack” (1230 x 1150 x 200mm),
or may be fully assembled upon request. Zinc finish
• Load Centre:
600 mm
• Unit Weight:
122 kg
160 mm x 60 mm
640 mm
WP-N Flatpack
PLEASE NOTE: The use of a WP-N Work Platform on a forklift truck should not be considered if the capacity of that
forklift is less than 1860 kg for a counterbalanced type or 1116 kg for a reach type forklift.
Type WP-MS Work Platform
The WP-MS Work Platform has full mesh infill panels (50 x 50 x 4mm mesh), preventing objects from falling
from the platform. Unit is supplied standard as a
”Flatpack” (1230 x 1150 x 250mm), or may be fully
assembled upon request. Supplied with slipper locking
pins, tool tray, and 2 harness anchor points. Zinc finish
250 kg
• Load Centre:
600 mm
• Unit weight:
132 kg
160 mm x 60 mm
640 mm
PLEASE NOTE: The use of a WP-MS Work Platform on a forklift truck should not be considered if the capacity of that
29
Manufactured Work Platforms
Type WP-G Zinc Plated Work Platform
With a fully welded construction, the WP-G Work Platform
is supplied ready for use. The upper protection panel is bolted
into position, being removable for transport and storage
purposes.
The WP-G is fitted with a self closing gate and bow lock for
added security. Slipper pins (pictured) are supplied to secure
the cage to the forklift tines. Cage is also fitted with 2 harness
anchor points.
• Load Centre:
600 mm
• Unit Weight:
132 kg
160 mm x 65 mm
640 mm
Locking Pins
PLEASE NOTE: The use of a WP-G Work Platform on a forklift truck should not be considered if the capacity of that
30
Work Platforms
Type WP-OP Order Picker Platform
Manufactured in strict accordance with AS 2359. 1 and
AS2359.6, the WP-OP Order Picking Cage must only be lifted
by a dedicated ‘Order Picking Forklift’. They can be custom
made to suit individual forklifts and applications. The load
capacity of the forklift will restrict the actual load capacity of
the Order Picking Cage. Enamel paint finish.
• Load Centre:
600 mm
140 mm x 66 mm
560 mm
• Unit Weight:
180 kg
(Standard cage specifications shown)
Type WP-OPG Order Picker Platform
Built to the same dimensions as the standard WP-OP, but also
fitted with a full width outward opening gate, enabling access to
stock where required. Enamel paint finish.
31
Goods Cages
Type WP-GC Goods Cage
The WP-GC forklift goods cage is suitable for storage and
transport of furniture and whitegoods, and is ideal for the
transportation of goods between ground and mezzanine levels.
The WP-GC forklift goods cage is NOT designed or
certified to convey personnel.
1000 kg
160 mm x 60 mm
644 mm
Type
WP-GC 12
WP-GC 18
Width (mm)
1200
1800
WP-GC 12
Depth (mm)
1200
1200
WP-GC 18
Height (mm)
1000
1000
WP-GC 12
32
Unit Weight (kg)
150
190
Type CRN65 Ramp
The CRN65 Container Ramp is designed for
bridging into standard containers from ground
level. The self-levelling lip allows for full load
capacity when on slightly uneven ground. The
ramp footing folds up to allow access to the
fork slippers for transport. Hand grip loops are
provided for this purpose. The standard finish is
enamel painted Safety Yellow.
6500 kg
• Unit Weight:
275 kg
• Width:
2200 mm
• Length:
2000 mm
165 mm x 60 mm
775 mm
33
Type CRSN8 Container Ramp
The CRS8 Container Ramp has been designed for
fast positioning and removal. Fitted with pockets
each side, plus flip-up front tine pockets, this ramp
can be manoeuvred easily in confined spaces.
Raised side plates prevent the forklift from
driving off the side. The tread plate decking is
fully gusseted underneath to eliminate fatigue.
Securing safety chains both sides of the ramp for
connection to the container. Enamel paint finish.
*12 Tonne
• Safe working load:
8000 kg
• Unit Weight:
410 kg
• Driveway width:
2390 mm
• Overall Length:
1800 mm
model available upon request
Type CRLN8 Container Ramp
The CRL8 Container Ramp has an overall length of
3 metres (1.5 metres of which is horizontal) allowing
even easier placement and removal of the first and
second line of pallets in a container.
Fork pockets are provided either side of the ramp
along with flip-up front tine pockets for ease of
transport. Securing safety chains both sides of the ramp
for securing to the container. Enamel paint finish.
*12 Tonne
model available upon request
34
• Safe working load:
8000 kg
• Unit Weight:
600 kg
• Driveway width:
2300 mm
• Overall Length:
3000 mm
Fork Extension Slippers
Type FE Fork Extension Slippers
The FE Fork Extension Slippers extend the versatility of the
fork truck. These slim profile slippers have been designed
and manufactured in accordance with AS2359.15.
In accordance with AS2359.15 slippers used for general
usage should be no longer than 167% of the supporting
tine’s length.
If the slippers are longer than 167%, then the usage of those
slippers shall be restricted to their specified application.
• Made from high tensile grade steel
• Zinc finish for corrosion protection (Type SL Painted)
• High Safe Working Load (SWL) rating
• Supplied with toggle locking pins
• Fitted with rating plate
• Supplied with instructions
Type
Length (mm)
FE1-16
FE1-18
FE1-21
FE1-24
FE2-16
FE2-18
FE2-21
FE2-24
FE3-16
FE3-18
FE3-21
FE3-24
FE3-30
FE4-18
FE4-21
FE4-24
FE4-30
SL5-18
SL5-21
SL5-24
SL5-30
SL6-21
SL6-24
SL6-30
SL7-24
SL7-30
SL7-35
1600
1780
2100
2400
1600
1780
2100
2400
1600
1780
2100
2400
3000
1780
2100
2400
3000
1800
2100
2400
3000
2100
2400
3000
2400
3000
3500
To suit max
tine size (mm)
100 x 45
100 x 45
100 x 45
100 x 45
130 x 50
130 x 50
130 x 50
130 x 50
155 x 55
155 x 55
155 x 55
155 x 55
155 x 55
160 x 65
160 x 65
160 x 65
160 x 65
Custom built to suit
35
Weight
per pair (kg)
50
56
66
75
60
66
78
88
91
102
119
136
170
133
155
177
221
170
200
220
280
380
430
540
520
650
760
SWL per pair
at 600mm l/c
3000
3000
3000
3000
4500
4500
4500
4500
6500
6500
6500
6500
6500
8500
8500
8500
8500
8000
8000
8000
8000
12,000
12,000
12,000
16,000
16,000
16,000
Fork Spreaders
Type FS2.5 Fork Spreader
The FS2.5 Fork Spreader is designed to safely lift extra wide
or flexible loads without the risk of damage to products
such as plasterboard, roof sheeting and timber.
The fork spreader evenly distributes the load over its full
length. This slip-on attachment is easily fitted onto the fork
lift and is secured by a safety chain. Enamel paint finish.
2500 kg
• Load Centre:
600 mm
• Unit Weight:
225 kg
• Fork Pocket size:
160 mm x 60 mm
775 mm
CUSTOM SIZE AND CAPACITY AVAILABLE ON REQUEST
Type FS3 / LG Fork Spreader
The FS3/LG is manufactured with a load guard, giving
additional protection and capacity. This unit is more suited
to where higher loads of loose product are being handled.
3000 kg
• Load Centre:
600 mm
• Unit Weight:
260 kg
• Load Guard Height:
600 mm
160 mm x 60 mm
775 mm
36
Roll Prongs
Type RPC Carriage
Mounted Roll Prong
The RPC Carriage Mounted Roll Prong is suitable for
carpet, vinyl, fabric etc. Units are available for Class 2,
Class 3 and Class 4 forklift carriages, along with pin
mounted.
All “QR” model roll prongs are fitted with “Quick
Release” mounting locks providing a safe and easy
connection to the forklift carriage, saving time and
eliminating the need for any tools. Prongs are made
from high tensile steel. Enamel paint finish.
• Lost Load for Class 2:
100 mm
225 mm
280 mm
Type
Mounting
Class
RPC-QR2-40-1200
RPC-QR2-50-1800
RPC-QR2-60-2800
RPC-QR2-70-2800
RPC-QR2-80-2800
RPC-QR3-70-2800
RPC-QR3-80-2800
RPC-QR3-100-2800
RPC-BH4-125-1200
RPC-BH4-125-2800
RPC-BH4-150-1200
RPC-BH4-150-2800
RPC-PM-200-1200
Class 2
Class 2
Class 2
Class 2
Class 2
Class 3
Class 3
Class 3
Class 4
Class 4
Class 4
Class 4
Pin Mount
Prong
Diameter
(mm)
40
50
60
70
80
70
80
100
125
125
150
150
200
RPC-QR2-70-2800
Prong Length
(mm)
Safe Working Load /
Load Centre
1200
1800
2800
2800
2800
2800
2800
2800
1200
2800
1200
2800
1200
200 kg at 600 mm
250 kg at 900 mm
340 kg at 1400 mm
510 kg at 1400 mm
850 kg at 1400 mm
510 kg at 1400 mm
850 kg at 1400 mm
1700 kg at 1400 mm
6500 kg at 600 mm
2785 kg at 1400 mm
10,000 kg at 600 mm
4285 kg at 1400 mm
13,000 kg at 600 mm
OTHER PRONG LENGTHS AVAILABLE ON REQUEST
37
Unit
Weight
(kg)
63
79
113
135
166
190
220
282
280
440
360
565
1400
Roll Prongs
Type RPS Slip-On Roll Prong
Slip on roll prongs are quick and easy to mount on
any forklift, although they are better suited to larger
capacity forklifts due to the extended load centre
created by the fork tines. Enamel paint finish.
The Safe Working Load (SWL) of this unit
varies depending on prong chosen. Please
refer to the table below.
RPS-2N-70-2800
Type
RPS-2N-40-1200
RPS-2N-50-1800
RPS-2N-60-2800
RPS-2N-70-2800
RPS-2N-80-2800
RPS-3N-100-2800
Fork
Pocket
Size
(mm)
190 x 65
190 x 65
190 x 65
190 x 65
190 x 65
180 x 80
Fork
Pocket
Centres
(mm)
345
345
345
345
345
360
Prong
Diameter
(mm)
Prong
Length
(mm)
Safe Working Load
/ Load Centre
Unit
Weight
(kg)
40
50
60
70
80
100
1200
1800
2800
2800
2800
2800
200 kg at 600 mm
250 kg at 900 mm
340 kg at 1400 mm
510 kg at 1400 mm
850 kg at 1400 mm
1700 kg at 1400 mm
91
106
141
163
194
328
OTHER PRONG LENGTHS AVAILABLE ON REQUEST
Please note the Safe Working Load shown has been calculated at the centre of the prong. If
the product being lifted exceeds the length of the prong please contact East West Engineering
for a revised Safe Working Load.
38
Fork Tines
Type FA Fork Tines
Type FA Fork Tines supplied by East West Engineering
have been designed and manufactured in accordance
with AS2359.1
Fork tines are supplied in a range of capacities and lengths.
Always ensure that the rating of the fork tines is equal to
or greater than the rated lift capacity of the fork truck.
Note: The fitting of fork tines with a lower rating
than the fork truck could lead to failure, resulting
in serious injury or death.
• Tough CrMo high tensile steel
• Light weight, slow wearing
• Standard ITA hooks
Type
FA12-100
FA15-107
FA15-120
FA25-107
FA25-120
FA30-107
FA30-120
FA45-107
FA45-120
Capacity at
500mm / pair
1200 kg
1500 kg
1500 kg
2500 kg
2500 kg
3000 kg
3000 kg
4500 kg
4500 kg
“A” mm
“B” mm
“C” mm
80
100
100
125
125
125
125
125
125
35
32
32
35
35
39
39
50
50
1000
1070
1200
1070
1200
1070
1200
1070
1200
Mounting Class
“D”
Class 2 - 407 mm
Class 2 - 407 mm
Class 2 - 407 mm
Class 2 - 407 mm
Class 2 - 407 mm
Class 3 - 508 mm
Class 3 - 508 mm
Class 3 - 508 mm
Class 3 - 508 mm
Weight Per
pair
64 kg
72 kg
83 kg
96 kg
107 kg
112 kg
130 kg
154 kg
166 kg
When fitting fork tines, ensure that the marking on the fork tine is compatible with the fork
truck rating. Each fork tine is stamped on the side with the relevant information. The
rating is for an individual fork tine and should be doubled to provide a total safe working
load. Refer to the table above for ratings.
39
Carriage Bar
Type FCB Carriage Bar
FCB Carriage Bar supplied by East West Engineering has been designed
in accordance with AS2359.11. Carriage bar is supplied in pairs, consisting
of one lower and one upper bar.
Manufactured from high tensile grade steel, ready for welding into
standard carriages.
• High tensile steel
• Precision machined
• ISO / FEM compliant
Upper and lower carriage bar have the same profile.
Cut out notches in upper bar only to suit fork tine locking.
Type
FCB2-102-P
FCB3-102-P
FCB4-160-P
ISO / FEM
Class 2
Class 3
Class 4
Class Bar Size (mm)
A
B
C
60
50
1020
70
50
1020
150
50
1600
Type TS Tarp Spreader
The TS Tarp Spreader is used to safely cover high
truck loads with a tarpaulin by forklift. This slip on
attachment is easily fitted onto the fork tines and
is secured by a safety chain.
The prong can be easily removed to allow
convenient storage or replacement if damaged.
NOTE: We recommend a minimum forklift
size of 2.5 tonne lift capacity.
180 mm x 65 mm
745 mm
200 kg
• Load Centre:
600 mm
• Unit Weight:
150 kg
41
49
188
Tarp Spreader
• Fork Pocket size: Weight per pair (kg)
40
Forward Bulk Bin Tippers
Type FBT-M Bin Tipper
The FBT-M Forward Bin Tipper allows for 180 degree
rotation of almost any bin. The bin tipper is manufactured
to suit the dimensions as required by the customer. The
bin tipper is operated without the forklift operator leaving
the drivers seat. A safety chain prevents the unit from
disengagement from the fork arms. Bins can be safely
transported about the work site and emptied quickly
where required. Available in either painted or zinc finish.
1500 kg
165 mm x 65 mm
610 mm
(All other specifications determined by design)
41
Type FBT-SH Bin Tipper
The FBT-SH Forward Bin Tipper is ideal for handling and
emptying bins in agricultural and manufacturing industries.
This slip-on attachment requires only one hydraulic function.
A purpose built hydraulic sequencing valve eliminates the
potential to drop the bin as rotation will not commence until
the bin is secured into position, while the gentle action of the
clamp arms prevents damage to the bins. The standard FBTSH will suit bins up to 1200mm square, with a height range
of 675 to 925mm. Enamel paint finish.
42
1000 kg
• Unit Weight:
290 kg
• Load Centre:
880 mm
• Lost Load:
300 mm
155 mm x 55 mm
540 mm
Floor Mounted Bulk Bin Tippers
Type FBT-45 Bin Tipper
A wide range of floor mounted hydraulic bin tippers are available to
suit various applications. Custom made to suit, these tippers offer
the ability to discharge product into processing and production
machinery and plant lines from bottom discharge bins. Please contact
East West Engineering to discuss your particular requirement.
Type FBT-CB7-130 Bin Tipper
With a 130 degree rotation, this powerful tipper is
perfectly suited to open top bins and crates, and can be
custom built to suit most applications. Available in zinc
plated or stainless steel.
43
Crane Work Platform Cages
Crane & Overhead Lifting
All East West Engineering crane work platform cages are designed and manufactured in accordance with
AS1418.17, and are supplied with load test certificate, instruction manual, risk control measures and WorkCover
registration. Fork pockets fitted for transport purposes only. Personnel cages are supplied with chains, safety
harness and anchor points.
Type WP-NCR
Four person cage with mesh roof and sides.
• Maximum capacity:
4 people
500 kg
• Unit Weight:
310 kg
• Zinc Finish
Type WP-NC
Four person cage with mesh sides.
• Maximum capacity: 4 people
• Zinc Finish
44
Type WP-NC2R
Six person cage with mesh roof and sides.
This Cage can also be manufactured to suit First Aid
Rescue by fitting an outward opening gate. Please specify
when ordering.
• Zinc Finish
Type WP-NC2
Six person cage with mesh sides.
• Zinc Finish
45
Type WP-C4
One person cage, without roof
• Maximum capacity: 1 person
• Enamel paint finish (safety yellow)
Type WP-C8
One person cage, fitted with mesh roof
46
Type WP-C3
One person, circular cage.
Type WP-C6
6 person cage, fitted with full mesh infill. The front mesh
panel above handrail height is removable for working
access.
• Maximum Capacity:
6 people
900 kg
• Unit Weight:
700 kg
47
Brick Cage
Type BSN6 Brick Cage
The BSN6 Brick Cage is designed to convey pallets of
bricks or similar loose products safely to a work location
via overhead crane.
Suitable for 1200mm square pallets (1240mm clear
inside), and up to 1500mm overall height. Zinc finish. The
cage can be supplied as a fully assembled welded unit
BSN6W or as a flat pack for self assembly BSN6F which
is then bolted together.
2000 kg
• Lifting Points:
4 point lift
• Unit Weight:
255 kg
Flatpack
Specifications
BSN-6W - Welded
BSN-6F - Bolted
Internal
Width
(mm)
1240
1240
Internal
Depth
(mm)
1240
1240
Internal
Height
(mm)
1500
1500
48
Overall
Width
(mm)
1340
1340
Overall
Depth
(mm)
1340
1340
Overall
Height
(mm)
1720
1720
Goods Cages
Type CSPN-01 Goods Cage
Safely convey loose or palletised goods using either forklift or crane. Full
width gate allows for 1200mm square pallets to be placed inside. Fitted with
crane lifting lugs, fork stirrups and interlocking feet, this versatile cage can
also be safely stacked. Zinc finish.
1000 kg
• Unit Weight:
175 kg
49
Gas Cylinder Cages
Type GCN2 Trolley Cage
Suitable for one type “G” Oxygen and one type “G” Acetylene gas cylinder, with provision to store all hoses inside the cage.
The cage is supplied with an internal loadbinder to securely fasten both cylinders.
Fitted with handle, crane lift point, and 400mm diameter air inflated rubber wheels, this cage can be transported manually
or by crane. Enamel paint finish.
250 kg
• Unit Weight:
80 kg
914
335
335
TRAY
WIDTH
400
TRAY
DEPTH
672
TRAY
WIDTH
LIFTING EYE
LOAD BINDER &
SECURING STRAPS
TYPE ‘G’ OXYGEN &
ACETYLENE BOTTLES
GATE LATCH
900
1370
PUSH HANDLE
Load Binder to secure bottles
Ø400
AIR INFLATED
RUBBER WHEELS
50
Type GB-CM2A Storage Cage
Secure gas cylinder storage cage, suitable for environments
such as building sites and mines. Cage is fitted with crane
lifting lugs, and fork pockets underneath.
Cage is fitted with a lockable door, and has a full metal roof
providing weather protection. A securing load binder prevents
cylinder movement during transport. The cage can be supplied
fully assembled or as a flatpack for on-site assembly. Zinc finish.
750 kg
• Unit Weight:
160 kg
165 mm x 65 mm
665 mm
*Also available with loading ramp (type GB-CM2-RP)
Flatpack
Ramp model
GB-CM2-RP
51
Gas Cylinder Cages
Type GB-SC Gas Bottle Storage Cage
The GB-SC gas cylinder cage is designed for storage and transportation
of gas cylinders either by forklift or by overhead crane. The cage is
fitted with 4 crane lugs and fork access underneath.
This stackable cage is fitted with double 270 degree opening gates
for easy access, and is supplied with load binder to securely fasten
cylinders. The cage can be supplied fully assembled or as a flatpack for
on-site assembly. Zinc finish.
1000 kg
• Unit weight:
170 kg
*Also available with loading ramp (type GB-SC-RP)
Stackable
Ramp model
GB-SC-RP
52
Concrete Kibbles
Type CKM Concrete Kibble
Concrete Kibbles have been designed for easy transfer of
concrete on site by overhead crane.
This lightweight, yet heavy duty kibble can be used for both
bottom and side discharge, with the use of the adjustable
chute. The unit is lever operated from either side for easy
operation, and is also fitted with fork pockets for transport
purposes. Enamel painted finish, Safety Yellow.
East West Engineering kibbles are supplied with full
instructions, risk and hazard identification manuals.
CKM05
Type
CKM 05
CKM 10
Capacity
0.5 cu. m
1.0 cu. m
SWL
1500 kg
3000 kg
Unit Weight
260 kg
320 kg
Filling Height
1175 mm
1295 mm
Transport Dimensions (mm)
1400 x 1260 x 1510 high
1450 x 1540 x 1680 high
CKM10 with side discharge chute in position
Dual sided discharge lever
CKM05
CKM10 with chute raised for bottom discharge
53
Concrete Kibbles
Type CKL Laydown Kibble
The CKL Kibble is a heavy duty roll-over style for use by overhead
crane. Suitable for large applications, models are available up to 3
cubic metres. The CKL kibble can be used for either bottom or side
discharge with the use of the adjustable chute. The kibble is fitted with
a 700 x 400mm clamshell gate which is lever operated.
The easily removable lever can
be quickly fitted to either side
of the kibble allowing flexible
operation. The unit is also
fitted with forklift pockets for
transport purposes about the
work site and has a storage
facility for the chute.
CKL30
Type
CKL 15
CKL 20
CKL 30
Capacity
1.5 cu. m
2.0 cu. m
3.0 cu. m
SWL
4000 kg
5000 kg
7500 kg
Unit Weight
825 kg
905 kg
1170 kg
Filling Height
840 mm
960 mm
980 mm
2575 x 1740 x 1790 high
2760 x 1740 x 1910 high
2810 x 2440 x 2095 high
Fully adjustable chute
Lever operated clamshell gate
Chute in storage position
Laydown position for filling
54
Concrete Kibbles
Type GK Grout Kibble
The GK Grout Kibbles have been designed for bottom dumping of
viscous materials including grout or equivalent liquids.
The handle positioning and use of a ‘Layflat’ hose allows an
unobstructed view by the operator of the material pour. The unit
is designed with a 300mm diameter butterfly valve to allow the
operator to control the pour via the handle. Forklift pockets have
been provided for transport about the work site.
The interior of the kibble has a smooth surface allowing for easy
discharge and quick cleaning.
GK 10
300mm Butterfly Valve
Type
Capacity
SWL
Unit Weight
GK 05
GK 10
0.5 cu. m
1.0 cu. m
1500 kg
3000 kg
240 kg
285 kg
Filling
Height
1140 mm
1450 mm
1450 x 1450 x 1540 high
1450 x 1450 x 1840 high
Type CCN215 Concrete Collection Tray
Limit environmental damage onsite by use of the Concrete Collection Tray. This low profile tray fits under the concrete
pump to collect spillage washout water and concrete waste. Fitted with fork pockets and crane lugs, the tray is constructed
with tapering sides. Enamel paint finish.
1500 kg
• Capacity:
0.85 cu. m
• Width:
2000 mm
• Depth:
1500 mm
• Height:
375 mm
• Unit Weight:
200 kg
55
Pallet Hooks
Type PHA 2000 Pallet Hook
The PHA 2000 automatic pallet hook is self
levelling for easy operation. The unit self balances
using an internal spring mechanism ensuring the
lifting eye is in the correct position to keep the
fork tines horizontal. Tine width is also adjustable
on the PHA 2000. Zinc finish.
• Minimum operating load: 250 kg
56
Pallet Hooks
Type PHD 2200 Pallet Hook
The PHD 2200 pallet hook is a versatile unit which features adjustable
body height and fork tine width positioning, which makes this unit ideal for
the transport and construction industry.
Load balancing is carried out by positioning the lifting ring to suit the centre
of gravity of the load. Zinc finish.
Type PHN 4500 Pallet Hook
A heavy capacity pallet hook suitable for loads up to 4.5 tonne.
Fully adjustable tines out to a maximum of 1200mm make this unit
extremely versatile.
Load balancing is carried out by positioning the lifting ring to suit the
centre of gravity of the load. Enamel paint finish.
57
Drum Handling
Type CDR Drum Rotator
The CDR Rotator offers 360 degree rotation of 205
litre drums with the use of an overhead crane.
Available in handle or chain rotation, this heavy duty
unit is well suited to mining operations, manufacturers
and foundries.
This rotator is available in either 500 kg or 1000 kg
Safe Working Load. Zinc finish.
CDR 500H
Type
Operation
SWL (kg)
Chain
Handle
Chain
Handle
500
500
1000
1000
CDR 500C
CDR 500H
CDR 1000C
CDR 1000H
Unit Weight
(kg)
120
120
220
220
CDR 500H
CDR 1000C
Type CDC-1 Drum Lifter
A simple and safe method for transporting 205 litre drums. The drum
is secured into the belly strap with an over centre locking handle with
additional safety pin. Zinc finish.
• Unit Weight:
30 kg
Drum Centre to Lifting Eye (mm)
58
790
790
940
940
Spreader Beams
Type CSB Spreader Beam
The CSB Crane Spreader Beam is available in a range
of capacities and lengths to suit any application. Crane
Spreader Beams are supplied standard with 5 lift positions
and fitted with 2 safety swivel hooks.
The standard finish on all Crane Spreader Beams is painted
enamel in ‘Safety Yellow’.
The chart below shows the standard range of Crane
Spreader Beams available. Choose the Safe Working Load
and Beam length (Dimension ‘A’) to suit your application.
Special width and capacity available on request.
Type
CSB 2x2
CSB 3x3
CSB 5x4
CSB 10x4
CSB 10x7
Safe Working Load (kg)
2000
3000
5000
10,000
10,000
Dimension “A” (mm)
2000
3000
4000
4000
7000
59
Unit Weight (kg)
70
110
300
480
1350
Bulk Bag Handling
Type BBFC4 Bulk Bag Jib
The type BBFC4 Bulk Bag Lifters are suitable for
lifting Bulk Bags designed with lifting loops by
overhead crane.
Two models are available. The standard BBF4
model
caters for Bags 100cm square nominal.The smaller
BBF4-700 model caters for Bags 70cm square
nominal.
SPECIFICATIONS:
• Safe Working Load 2000kg
• BBF4 Unit Weight 55kg
• BBF4-700 Unit Weight 45kg
A
• Hook Centres – refer Table below
DIMENSIONS (mm)
A
B
1000
1420
700
1045
A
MODEL
BBFC4
BBFC4-700
B
R25
110
195
CRANE LUG
60
Jib Attachments
Quickhitch & Telehandler
Type SHP-EXT Extended
Single Hook Jib
Manufactured to suit most Telehandler and Quickhitch
arrangements, the SHP-EXT is custom manufactured to
suit the quickhitch as specified by the customer.
The SHP-EXT quick hitch jib is manufactured with a single
hook point, at a distance of 2000mm load centre, and has
a Safe Working Load of 4000 kg. Enamel paint finish.
• Supplied with hook & shackle
• Fork pockets fitted for transport
• Approximate Weight: 250 kg
Quick hitches available to suit most telehandlers
and loaders.
Type SHP Single Hook Jib
The SHP Single Hook Point Jib is a simple single
hook point jib offering one lifting point at a nominal
distance of 500mm load centre, with an SWL of
4000kg. Enamal paint finish.
• Supplied with hook & shackle
• Approximate Weight: 150 kg
61
Work Platform
Type WP-UG Work Platform
The WP-UG Work Platform can be manufactured for
most quickhitch arrangements. Manufactured in strict
accordance with Australian Standards, the WP-UG Work
Platform is only suitable for underground operations
such as mining etc. to safely perform “Special Tasks” and
is suitable for a maximum of two people.
Please note: The actual load capacity of the work
platform may be restricted by the load capacity of the
telehandler. We recommend checking with your local
regulatory authority for special laws covering the use of
personnel cages when fitted to telehandlers.
Type FL-CA Floating Carriage
The FL-CA Floating Carriage is designed for Telehandler
and Loader machines fitted with quick hitch arrangement.
The tines are pin mounted to “self level” when the
machine is operating on uneven ground. Fitted with
125mm x 50mm fork tines with a length of 1200mm.
4500 kg at 600 mm
• Max Tine Spread:
1200 mm
• Approx. Unit Weight:
400 kg
500 kg
• Load Centre:
700 mm
• Approx. Unit Weight:
500 kg
Floating Carriage
• Safe Working Load: 62
Universal Fork Carriage
Type CB Universal Carriage
The CB Universal Carriage is a weld on unit suitable for all machinery and agricultural applications where fork arms are to
be fitted. Manufactured from high grade steel in accordance with AS2359.11, the carriage is precision machined to suit either
Class 2 or Class 3 fork tines.
Type
CB2-1500
CB2-2500
CB3-5000
ISO /
FEM
Class
2
2
3
SWL @ 500mm
Load Centre
Unit Weight
(kg)
“A” (mm)
“B” (mm)
“C” (mm)
1500 kg
2500 kg
5000 kg
36
44
70
60
80
100
1200
1200
1200
347
347
428
63
Waste & Storage Bins
Type CFS Tipping Bin
The light weight and cost effective type CFS6 Fork
Skip Bin has been manufactured from 2mm plate and
is suitable for goods or waste transport and storage.
Fitted with a forklift carriage and safety chain, two front
wheels, a rear swivel wheel and push handle, these bins
are designed for manual push over. Zinc finish.
• Fork Pocket size: 140 mm x 65 mm
• Drain Plug fitted standard
Type
CFS 6
CFS 9
Capacity
(cu. m)
0.35
0.50
SWL
(kg)
350
350
Length
(mm)
1120
1120
Height
(mm)
860
860
64
Overall
Width (mm)
730
1030
Unit Weight
(kg)
65
77
Type FSB Tipping Bin
A light weight and cost effective bin suitable for goods
transport, storage or waste. Manufactured from 2mm
plate, and available in either painted or zinc finish.
Fitted with a forklift carriage, these bins are designed
for manual push over. Wheels fitted standard, two front
and one rear.
140 mm x 65 mm
• FSB6 Fork Pocket Centres:
300 mm
• FSB9 Fork Pocket Centres:
640 mm
Options Available:
• Crane Lugs
FSB 6
• Drain Valve & Strainer
Type
FSB 6
FSB 9
Capacity
(cu. m)
0.35
0.65
SWL
(kg)
350
350
Length
(mm)
1120
1120
Height
(mm)
860
860
FSB 9
Width
(mm)
580
900
FSB 6 Tipped
65
Overall
Width (mm)
730
1050
Unit Weight
(kg)
65
90
Type NSD Tipping Bin
The NSD self dumping waste bins provide an
economical solution to collecting and disposing of
industrial waste. During transport, the forklift tines are
positioned fully under the bin ensuring the forklifts full
lifting capacity is utilised.
To empty the bin the operator places the front feet
of the bin inside the edge of the bulk dumpster,
then drive backwards until the tines clear the pivot
point and then raise to allow the bin to tip forward.
Available in either painted or zinc finish.
1000 kg
185 mm x 65 mm
NSD6:
NSD9 – NSD18:
360 mm
610 mm
Options Available:
Type
• Crane Lugs
NSD 6
NSD 9
NSD 12
NSD 15
NSD 18
• Cast Iron or Rubber Wheels
Capacity
(cu. m)
Length
(mm)
Width
(mm)
Height
(mm)
0.7
1.0
1.35
1.7
2.0
1425
1425
1425
1425
1425
600
900
1200
1500
1800
1000
1000
1000
1000
1000
Unit
Weight
(kg)
185
200
215
240
260
Stackable
NSD 12 + Wheels & Lugs
NSD 12
66
Type SSD Tipping Bin
A low profile, compact bin for use in confined areas.
Well suited to production machinery such as punching
machines for the collection of slugs etc. Heavy duty
construction with self dumping ability, the forklift operator
empties the bin without leaving the drivers seat. Available
in either painted or zinc finish.
1000 kg
185 mm x 65 mm
360 mm
• Bin Width:
750 mm
Options Available:
SSD 3
• Crane Lugs
Type
Capacity (cu. m)
Width (mm)
Length (mm)
Height (mm)
SSD 3
SSD 4
SSD 5
SSD 6
0.2
0.3
0.4
0.5
710
710
710
710
1185
1245
1300
1360
430
530
630
730
Unit Weight
(kg)
80
90
100
110
SSD 6 Stacked
SSD 4 + Wheels
67
Type JSD Tipping Bin
These are bulk capacity bins for heavy waste, with
models available up to 5.4 cubic metres. Manufactured
from 5mm plate and channel reinforcement, these
bins have an SWL of 3000kg.
The JSD bins are fitted with oversize fork pockets to
suit large forklifts. They are a self dumping bin with
the operator not having to leave the drivers seat
during the tipping cycle. Enamel paint finish.
3000 kg
180 mm x 80 mm
950 mm
JSD 18
Options Available:
• Crane Lugs
Type
Capacity (cu. m)
Width (mm)
Length (mm)
Height (mm)
JSD 18
JSD 24
JSD 30
3.2
4.3
5.4
1910
2510
3110
1900
1900
1900
1125
1125
1125
68
Unit Weight
(kg)
850
950
1050
Type CSD Tipping Bin
The economical CSD bin is a self dumping bin
suitable for most waste handling applications.
This bin is supplied standard with 4 crane lugs
and upending lugs under.
It is also fitted with a drain plug and wheel
brackets (wheels not supplied unless ordered).
Being a nesting bin, it uses a minimum of space
for storage and transport. Available in zinc finish.
• Crane Lugs fitted standard
• Drain Plug fitted standard
Options Available:
CSD 12
• Rubber or Cast Iron Wheels
Capacity
(cu. m)
Width
(mm)
Length
(mm)
Height
(mm)
Fork Pocket
Size (mm)
CSD 9
CSD 12
0.95
1.25
1010
1310
1570
1570
1010
1010
185 x 75
185 x 75
Fork Pocket
Centres
(mm)
340
630
CSD 18
1.85
1910
1570
1010
185 x 75
630
Type
CSD 12 + Wheels
CSD 12 Stacked
69
Unit Weight
(kg)
180
205
245
Type NTU Tipping Bin
The NTU heavy duty tip up bin is manufactured from 3mm
plate and is fitted with fully reinforced edges. These bins
are ideally suited to heavy waste including metal, timber and
building site rubble.
The release mechanism is activated by the forklift operator
pulling the pull chord from the driver’s seat. The custom built
shock absorber prevents impact forces being transmitted to
the forklift during emptying. Available in either painted or
zinc finish.
185 mm x 65 mm
660 mm (NTU 6: 380 mm)
1000 kg
NTU 12
Options Available:
• Crane Lugs
• Drain Cock & Strainer
Type
NTU 6
NTU 9
NTU 12
NTU 15
NTU 18
Capacity (cu. m)
Width (mm)
Length (mm)
Height (mm)
Weight (kg)
0.7
1.0
1.35
1.7
2.0
600
900
1200
1500
1800
1420
1420
1420
1420
1420
1000
1000
1000
1000
1000
190
210
225
255
280
NTU 12 Tipped
NTU 18
70
Type TU Tipping Bin
The TU bin is manufactured from 3mm plate and has a
lower profile which allows more versatility in confined
areas. The pouring lip and smooth formed edges make
this bin ideal for food industry applications.
The release mechanism is activated by the forklift
operator pulling the draw rope from the driver’s seat. The
custom built shock absorber prevents impact forces being
transmitted to the forklift during emptying. Available in
either painted or zinc finish.
185 mm x 65 mm
660 mm (TU6: 380 mm)
1000 kg
TU 9 + Wheels
Options Available:
• Crane Lugs
Type
Capacity (cu. m)
Width (mm)
Length (mm)
Height (mm)
Unit Weight (kg)
TU 6
TU 9
TU 12
TU 15
TU 18
0.5
0.75
1.0
1.25
1.5
700
1000
1300
1600
1900
1400
1400
1400
1400
1400
940
940
940
940
940
185
200
215
240
260
TU 12 + Wheels
TU 12 + Crane Lugs
71
Type JTU Tipping Bin
A larger bin for bulk capacity, the JTU
bin is manufactured from 3mm plate and
fitted with strengthening ribs. The release
mechanism is activated by the forklift
operator pulling the draw rope from the
driver’s seat. Powerful shock absorbers
prevent impact forces being transmitted
to the forklift during emptying. Available in
JTU 24 + Crane Lugs
185 mm x 65 mm
760 mm
1000 kg
Options Available:
• Crane Lugs
JTU 18 + Plastic Lids
• Plastic Lids for JTU 18 only
Type
Capacity (cu. m)
Width (mm)
Length (mm)
Height (mm)
Unit Weight (kg)
JTU 18
JTU 24
2.25
3.0
1900
2500
1460
1460
1130
1130
270
310
72
Type ROB Rollover Bin
The ROB bin has a smooth tipping action with
minimal impact when emptying. The cut away
front lip makes this style of bin ideal for tipping
liquid product. To tip, the operator simply pulls the
handle via a draw rope without leaving their seat.
185 mm x 65 mm
600 mm
1000 kg
Options Available:
• Crane Lugs
ROB 9
Type
ROB 9
ROB 12
ROB 15
ROB 18
Capacity (cu. m)
0.90
1.15
1.40
1.70
Overall Width
(mm)
1050
1350
1650
1950
Length (mm)
Height (mm)
1500
1500
1500
1500
1120
1120
1120
1120
ROB 9 + Wheels
73
Unit Weight
(kg)
210
225
255
280
Type SROB Roll Sideways Bin
Sideways discharge bin with the ability to tip in either
direction. Fork pockets are provided for end or
sideways lifting and tipping. This bin is ideally suited to
the food industry. Available in either painted or zinc
finish. Stainless Steel also available on request. Wheels
fitted as standard.
SROB 12
Sideways Tipped
• Fork Pockets:
140 mm x 60 mm
• End Fork Pocket Centres: 450 mm
• Side Fork Pocket Centres: 600 mm
Options Available:
• Crane Lugs
• Drain Plug
Type
SROB 9
SROB 12
Capacity
(litres)
400
550
Width (mm)
Length (mm)
Height (mm)
Unit Weight (kg)
700
700
1200
1500
1075
1075
150
170
Lever Release
Forward Tipped
74
Drop Bottom Bins
Type DB Drop Bottom Bin
The DB Drop Bottom Bin is a heavy duty unit manufactured
from 3mm plate and is reinforced to handle all types of
solid waste product.
Able to be transported by either forklift or crane, emptying
is carried out by pulling the draw rope handle which
allows the floor to drop open from one side, allowing
complete emptying. Shock absorbing system removes
all impact from forklift or crane during emptying. Enamel
painted finish.
160 mm x 65 mm
684 mm
1000 kg
Options Available:
DB 800
Type
DB500
DB 800
DB 1100
Capacity (cu. m)
Width (mm)
Length (mm)
Height (mm)
0.5
0.8
1.1
1200
1200
1200
1025
1025
1025
745
1045
1345
DB 1100
DB 800 + Wheels
75
Unit Weight
(kg)
200
225
250
Hopper Bins
Type HB Hopper Bin
The HB Hopper Bin has a unique “Clam Shell” opening mechanism and
is available in three models with different volume capacities as detailed
in the table below. The bin is fitted with forklift pockets and is stackable
2 high. Enamel paint finish.
185 mm x 65 mm
625 mm
1000 kg
Options Available:
• Crane Lugs
• Wheels
HB1-10
Type
Capacity (cu. m)
Width (mm)
Length (mm)
Height (mm)
0.5
1.0
1.5
1120
1120
1120
1120
1120
1120
1350
1750
2150
HB1-5
HB1-10
HB1-15
Clam Shell Gate
HB1-15 + Wheels
76
Unit Weight
(kg)
200
250
300
Crane Bins
Type SSC Crane Bins
A heavy load capacity storage bin suitable for all
manufacturing and construction sites. This versatile
bin can be moved by crane, forklift or pallet truck.
Fitted with four way forklift pockets and corner
crane lifting lugs, these bins can be stacked 4 high.
The bin can be emptied by crane or a forklift fitted
with carriage rotator.
Bins have corner drain holes, and are available in
Options Available:
• Cast Iron or Rubber Wheels (not stackable)
SSC 800 and SSC 1000
• No Drain Holes
Type
SSC 400
SSC 800
SSC 1000
SSC 1200
Capacity (cu. m)
SWL (kg)
Width (mm)
0.4
0.8
1.0
1.2
2000
2000
2000
2000
1250
1250
1250
1250
Length
(mm)
1250
1250
1250
1250
Height
(mm)
475
775
925
1075
Unit Weight
(kg)
200
220
240
260
SSC 800
4 Way Pockets
SSC 1000
77
Crane Bins
Type BWB Bulk Waste Bin
The BWB Bulk Waste Bin is ideal for building and mining
sites using overhead cranes. This bin is available in three
different sizes up to a maximum capacity of 14 tonne
SWL. Enamel paint finish.
Note: BWB 50 model only supplied with lifting chains.
BWB 15
BWB 30
Type
BWB 15
BWB 30
BWB 50
BWB 15
Capacity (cu. m)
SWL (kg)
Width (mm)
1.5
3.0
5.0
3000
5000
14,000
1500
1500
2400
78
Length
(mm)
1800
2400
3000
Height
(mm)
855
905
960
Unit Weight
(kg)
560
825
2560
Crane Bins
Type CB 20 Crane Bin
The CB 20 bin is a heavy duty bin suitable for products such
as sand, gravel, excavation waste and scrap metal.
The bin comes standard with 6 crane lugs for crane operation,
and fork pockets are fitted for transport. Enamel paint
finish.
Refer to table for full specifications.
185 mm x 85 mm
725 mm
CB 20
With a larger capacity, the CB 30 has a higher safe working load.
185 mm x 85 mm
725 mm
CB 30
Manufactured from 6 mm plate and reinforced with
additional bracing, the CB 50 is an extremely heavy
duty bin for large capacity volumes. Enamel paint finish.
185 mm x 85 mm
950 mm
CB 50
Type
CB 20
CB 30
CB 50
Capacity (cu. m) SWL (kg)
1.25
1.90
2.0
2000
3000
5000
Overall Width
(mm)
1170
1330
1660
79
Length (mm)
1924
2155
2495
Height
(mm)
930
1070
905
Unit Weight
(kg)
310
390
720
Crane Bins
Type NCB Crane Bin
A stackable bin designed for crane lifting and emptying. The stack legs allow for easy handling by forklift.
1000 kg
Available Options
• Drain holes
• Fork pockets
NCB 9
'BIN WIDTH'
(REFER TABLE)
Type
NCB 6
NCB 9
NCB 12
Capacity
(cu. m)
Width
(mm)
0.7
1.0
1.35
600
900
1200
Unit
Weight
(kg)
160
180
190
NCB 9 with Fork Pocket Option
80
Spill Bins
Drum Storage & Racking
Type SL Spill Bins
Offering complete protection against damaging and
costly chemical spills, SL spill bins are available for 1, 2 or
4 x 205 litre drums.
Close spacing support bars allow for large or small
drums up to 2000kg SWL to be placed on the spill bin.
All models have a spill capacity of at least 110%
containment of the largest drum in accordance with
Australian Standards, being classified as “portable” units,
and have a zinc finish.
SL 4
Timber pallets will fit within the SL 4 spill
bin, or drums may be placed directly on
the support bars.
SL 2
Type
No. of Drums
SL 1
SL 2
SL 4
1
2
4
SL 1
Width
(mm)
810
1210
1210
Depth (mm)
Height (mm)
760
610
1210
490
440
265
Spill Capacity
(litres)
240
250
245
Unit Weight
(kg)
55
60
70
Type SLC Spill Bins
Fitted with a cargo protection shield and safety securing chain,
the SLC range offers additional protection against damaging the
stored drums.
Available in 1, 2 and 4 drum storage units.
SLC 4
Type
No. of Drums
SLC 1
SLC 2
SLC 4
1
2
4
Width
(mm)
810
1210
1210
Depth (mm)
Height (mm)
760
610
1210
1350
1300
1100
81
Spill Capacity
(litres)
240
250
245
Unit Weight
(kg)
105
115
120
Spill Bins
Drum Storage & Racking
Type SL-IBC Spill Bins
The type SL-IBC-1250 Spill Bin has been specifically
designed for IBC’s (Intermediate Bulk Containers)
and suit most IBC’s on the market.This unit has close
spacing support bars and comes in a long life Zinc
plated finish, offering a complete protection against
damaging and costly chemical spills
SL-IBC 1250
Type
SL-IBC 1250
Width (mm)
Depth (mm)
Height (mm)
1456
1456
831
Spill Capacity
(litres)
1250
Unit Weight (kg)
195
Type RS-IBC Spill Bins
This unit provides a support frame which allows the
IBC to be in a raised position, useful for decanting
directly from the IBC, or allowing easy access for
hose couplings to the drain valve.
Additional support tray also supplied. Zinc finish.
RS-IBC 1250
Type
RS-IBC 1250
Width (mm)
Depth (mm)
Height (mm)
1460
1458
1137
82
Spill Capacity
(litres)
1250
Unit Weight (kg)
248
Stillage Cage
Storage Cages / Trolleys / Pallets
Type PCM-01 Stillage Cage
A multi-use pallet size cage, designed to suit all
warehousing and storage requirements, with the
advantage of being quickly dismantled for valuable space
saving & transport efficiency.
This durable, economical cage can be transported by
forklift or pallet trolley, and can be stacked up to 4 high
when empty and 2 high when loaded. Front drop down
gate and rear hinge gate are both removable, and are
able to be opened for easy access, even when stacked.
Optional Zinc sheet metal flooring which fits over the
existing mesh base frame, is available upon request.
• Load Capacity: 1000 kg (evenly distributed)
• Unit Weight:
65 kg
• Zinc Finish
• Unit is supplied flatpacked
Option Available
• Sheet Metal Floor
Supplied flatpacked
Internal
Width (mm)
1080
Internal
Depth (mm)
1080
Internal
Height (mm)
825
Overall
Width (mm)
1160
Removable Hinged Gate
Overall
Depth (mm)
1200
Overall
Height (mm)
1000
Gate Removed
Stackable
Optional Sheet Metal Floor
Removable Drop Down Gate
83
Stillage Cage
Type PCMH-03 Stillage Cage
The PCMH-03 stillage cage is a smaller version of the PCM-01,
being only half the height. The cage is fitted with removable
front and rear hinged gates, which can be easily opened for
access, even when stacked.
Able to be transported by forklift or pallet trolley, this cage
can be stacked 4 high when empty and 2 high when loaded.
Optional galvanised sheet metal flooring which fits over the
existing mesh base frame is available on request.
• Load Capacity:
1000 kg (evenly distributed)
• Unit Weight:
53 kg
• Zinc Finish
• Unit Supplied as flatpack
Option Available
Internal
Width (mm)
1080
Internal
Depth (mm)
1080
Internal
Height (mm)
377
Overall
Width (mm)
1160
Overall
Depth (mm)
1200
Overall
Height (mm)
614
Removable
Hinged Gates
Supplied flatpacked
Gates Removed
Optional Sheet Metal Floor
84
Pallet Cage
Type PCT-02 Pallet Cage
The PCT-02 Pallet Cage is designed for safe storage and
transport of loose or packaged goods. The side panels are
mounted to a standard 1170 X 1170 mm pallet. Front drop
down gate and rear hinged gate are both removable and are
able to be opened for easy access. Zinc finish. Supplied as a flat
pack with standard pallet.
• Load Capacity:
2000 kg
• Unit Weight:
75 kg (including pallet)
Option Available:
Supplied flatpacked
Internal
Width (mm)
1080
Internal
Depth (mm)
1080
Internal
Height (mm)
754
Overall
Width (mm)
1165
Gates Removed
Removable Drop Down Gate
Removable
Hinged Gate
Overall
Depth (mm)
1205
Stackable
85
Optional Sheet
Metal Floor
Overall
Height (mm)
975
Pallet Cage
Type PCTH-04 Pallet Cage
The PCTH-04 pallet cage is a smaller version of the PCT-02,
being only half the height. Pallet Cage is designed for safe
storage and transport of loose or packaged goods. The side
panels are mounted to a standard 1170 X 1170 mm pallet.
This cage can be transported by Forklift or Pallet Trolley and can
be stacked up to 4 high when empty and 2 high when loaded. Front
and rear hinged gates are both removable and are designed to
swing outwards for easy access to goods within the cage,even when
stacked. Zinc finish. Supplied as a flat pack with standard pallet.
• Load Capacity:
2000 kg
• Unit Weight:
62 kg (including pallet)
Option Available:
Internal
Width (mm)
1080
Internal
Depth (mm)
1080
Internal
Height (mm)
375
Overall
Width (mm)
1165
Overall
Depth (mm)
1196
Removable
Hinged Gate
Supplied as flat pack
86
Overall
Height (mm)
595
Pallet Cage
Type WMP-01 Wire Mesh Pallet Cage
The WMP-01 Wire Mesh Pallet Cage is a stackable transport and
storage cage ideal for production, warehousing and component
storage applications. Easily collapsible for space saving during
transport, the cage is erected without any tools in seconds. This
cage is fitted with drop down access panels at the front and rear
allowing easy access to the base, even when stacked.
The cage can be supplied either with a standard 1165mm square
pallet (type WMP-01-P) or without pallet (type WMP-01-NP)
depending on your preference. When fitted with pallet the cage
can be stacked 2 high when fully loaded or 4 high when empty,
making it suitable for racking or stand alone applications.
Zinc finish.
SPECIFICATIONS (with Pallet fitted):
• Load capacity: 1000kg (evenly distributed)
• Unit Weight (with pallet): 78kg
• Unit Weight (without pallet): 40kg
• Uses Standard pallet (optional)
Internal
Width (mm)
1102
Internal
Depth (mm)
1102
Internal
Height (mm)
762
Overall
Width (mm)
1180
Overall
Depth (mm)
1180
Overall
Height* (mm)
906
* Including pallet
87
Collapsible Mesh Cage
Type MMC-01 Mesh Cage
A stackable transport and storage cage, ideal for production,
warehousing and component storage applications. Easily
collapsible for space saving during transport, the MMC-01 is
assembled without any tools in seconds. Cage is fitted with a
drop down access gate allowing easy access to the base, even
when stacked.
The MMC-01 cage can be transported by forklift or pallet trolley,
and can be stacked 2 high when fully loaded, making this cage
suitable for racking or stand alone applications. Front and rear
panels are removable.
• Load Capacity:
1000 kg • Unit Weight:
94 kg
• Collapsed Height:
248 mm
• Powder coated frame / zinc plated insert panels.
Internal
Width (mm)
1045
Internal
Depth (mm)
1045
Internal
Height (mm)
740
Overall
Width (mm)
1180
Collapsible
88
Overall
Depth (mm)
1180
Stackable
Overall
Height (mm)
920
Goods Trolley
Type RGT-01 Goods Trolley
The RGT-01 general purpose goods trolley offers the space
saving benefit of being able to be collapsed easily for storage
when not in use. Fitted with a fold away upper shelf and 270
degree opening lockable gates, this cage can be used in a single
or a two shelf configuration.
The RGT-01 is fitted with 4 x 150mm diameter swivel wheels
for easy manoeuvrability. Front wheels fitted with brakes for
security.
• Load Capacity: 500 kg (evenly distributed)
• Unit Weight:
94 kg
• Powder Coat Finish
Internal
Width
(mm)
1030
Internal
Depth
(mm)
750
Collapsible
Internal
Height upper
shelf (mm)
650
Internal
Height lower
shelf (mm)
780
Single Shelf Configuration
89
Overall
Width
(mm)
1100
Overall
Depth
(mm)
800
Overall
Height
(mm)
1700
2 Shelf Configuration
Storage Boxes
Type SMB Storage Boxes
A heavy duty Storage Box, the SMB is designed for secure handling
of heavy weight components/ parts in and around your workshop
or during transport.
When When equipped with the optional lockable lid (SMB1150-L
Model only), the Storage Box is a perfect place for all your on-site
tools and smaller equipment.
The SMB can be transported by Forklift or Crane, and is stackable
up to 4 high. Zinc Finish
Option Available
SMB750
• Lockable lid (SMB1150 model only)
TYPE
Dimensions (mm)
‘A’
‘B’
‘C’
‘D’
Volume
(litres)
SMB-750
750
700
620
620
158
58
NO
SMB-1150
1150
1100
1020
780
580
113
NO
SMB-1150L
1150
1100
1020
780
580
152
YES
(Lid option)
SMB 1150-L
Stackable
90
Unit Weight
(kg)
Lid
Supplied
Notes
91

Forklift Tipping Bins - East West Engineering

Transcription

Similar documents

Dudley firm reaches new heights

technician shirt

Untitled

In Touch Ministries

Marzocchi fork Travel change – MY2010+ air sprung forks

pdf

Pobierz dodatek - English Matters

10 Best Wine Travel Destinations 2013

2014 Cohutta

Please read carefully this data and document. We have