ITW Binks Table Of Contents

Transcription

ITW Binks Table of Contents
Spray Guns-Accessories
HVLP Spray Guns ..........................................................................................40
Conventional and Additional Spray Guns .................................................. 41-43
Airless Twist Tips ............................................................................................44
Airless Paint Spray Hose ................................................................................44
Spray Gun Extensions ....................................................................................45
Spray Gun Cups .............................................................................................46
Tanks - PT ASME Code............................................................................ 47-48
Tanks - Stainless Steel .............................................................................. 49-50
Tanks - Galvanized ................................................................................... 51-52
Tanks - Galvanized and Stainless Steel Fitted .................................................53
Tank Accessories ...........................................................................................54
Pumps - Pogo, Infinity, Gemini, Comet ...................................................... 55-57
Pump Packages ...................................................................................... 58-64
Finishing Systems/Packages .........................................................................65
Drum Covers and Agitators ............................................................................66
Fluid Regulators .............................................................................................67
HVLP Conversion Accessories ......................................................................68
Spray Gun Accessories ............................................................................ 69-70
Siphon Hoses and Ball Valves ........................................................................70
HVLP Accessories ................................................................................... 71-72
Air Control Equipment Accessories ................................................................73
Cartridge Respirators .....................................................................................74
Understanding Pressure Drop ........................................................................75
Premium Spray Finishing Air Hose .................................................................76
FluidallTM Fluid Hose .......................................................................................77
Lightweight ErgoFlexTM Hose ..........................................................................78
Specialized Hose Assemblies .................................................................. 79-80
Tubing ............................................................................................................81
Hose/Tube Accessories..................................................................................82
Adapters, Nipples, Swivels .............................................................................83
Order Toll-Free 800-365-7565
Govt. Purchase Cards Accepted
HVLP Spray Guns
MACH 1 SL (Slim Line) HVLP
Lightweight, top quality high performance
spray gun.
Body: Drop-forged anodized aluminum
Weight: 16.5 oz.
Air Inlet: 1/4” NPS (M)
Fluid Inlet: 3/8” NPS (M)
Fluid Passages: Stainless Steel
Feed Type: Pressure/Siphon Feed
Part Sheet:
2665
Gun Repair Kit: 54-4278
MACH 1 HVLP
The MACH 1A Automatic offers total
control of atomizing air pressure, side
port air, fluid flow and spray patterns in
production settings which require
automatic equipment.
The MACH 1AR Automatic is ideal for
application where visual indication of fluid needle location is
essential. It is pneumatically activated for application in a
variety of automated spray systems.
Cub SLG and Cub SL Touch-Up Guns
Full size lightweight spray gun
Weight: 20.1 oz.
Part Sheet: 2463
M1-G HVLP
The M1-G HVLP gravity feed spray gun not
only complies with all air quality regulations,
but also atomizes and spray as quickly as a
conventional air spray gun.
Body: Drop-forged aluminum
Weight: 21.9 oz.
Feed Type: Gravity
Part Sheet: 2650
40
MACH 1A & 1AR HVLP
The Cub SLG (gravity feed) and the Cub SL (siphon/pressure)
are the finest touch-up and specialty HVLP
coating guns.
Cub SLG
Weight: 15.2 oz.
Feed Type: Gravity
Part Sheet:
2735
Cub SL
Weight: 12.3 oz.
Fluid Passage: Stainless Steel
Part Sheet: 2734
Conventional Spray Guns
95 Gun
2001 Gun
High production spray gun.
Body: Drop-forged anodized
aluminum
Weight: 27 oz.
Part Sheet: 2625
Compact, lightweight and well
balanced
Body: Drop-forged anodized
aluminum
Weight: 24 oz.
Fluid Passages: Brass/Electoless
nickel plated
Part Sheet: 2316
Five Easy Ways to Order from Fluid-Air Products Inc.
CALL
MAIL
Toll-Free
your order
800-365-7565 12834 Gravois Rd.
to order
St. Louis, MO 63127
FAX
your order
314-729-7099
E-MAIL
your order
[email protected]
WEBSITE
Visit our site
www.fluidair.com
and link to
www.gsa.gov
for on-line ordering
41
Additional Spray Guns
95A Automatic Guns
Mode1 190 - Air Blow Gun
Conventional style air spray
gun that is pneumatically
activated for applications with
reciprocating, rotary, spindle
machines, and in stationary
spray gun set-ups
Weight: 20.5 oz.
Cylinder Air Inlet: 1/4” NPS (M)
Cylinder Air Pressure: 40 PSI Min./100 PSI Max.
Atomization Air: 1/4” NPS (M)
Fluid Pressure: 100 PSI Max.
Mounting Hole: 1/2”
Part Sheet: 2641
Gun Repair Kit:: 54-3579
Model 95 AV
Same features as Model 95A Spray Gun, but a tungsten carbide
fluid nozzle and needle are used. For use with abrasive fluids.
Model 95AR
Same features as Model 95A Spray Gun, but has ratchet type
adjustable needle valve control. Recommended for installations
requiring numerous fluid control adjustments.
Model 7E2 - Heavy Duty Gun
Designed for continuous spraying of
heavy bodied fluids. Drop-forged
aluminum body. Replaceable plated
drop-forged brass head. Adjustable
floating fluid needle valve. Stainless
steel air valve cartridge. Trigger has
hardened steel wear plate. Adjustable
spray pattern.
Weight: 1 lb. 14 oz.
Part Sheet: 2670
42
Use for dusting, drying, removing
chips, etc. Pistol grip style with
aluminum diecast body. Nozzle
number 60-40 (complies with
paragraph 50-204 Walsh-Healy Alt
and OSHA where air inlet does not
exceed 100 PSI) with 1/16” orifice
is standard. Optional 5 1/2”
extension (60-41) available. 1/4”
NPT (m) air inlet. Air consumption
3 1/2 CFM at 50 PSI.
Part Sheet: 1108
Airless 1
Heavy duty professional spray gun for applying various
maintenance and decorative finishes. This lightweight,
aluminum-bodied, drop-forged,
spray gun features a stainless
steel head and fluid passages,
ball-type fluid valve, removable
valve assembly, tungsten
carbide seat, and built-in
diffuser.
A large rest pad at the back of
the spray gun gives excellent
operator comfort, in-the-hand
support and balance. The
thumb-operated safety trigger lock permits one hand locking,
unlocking, and triggering. A tip guard is included for added
safety. Spray tip not included. Maximum operating pressure is
6000 PSI.
Part Sheet: 2340
Model 140B - Heavy Duty Gun
Use for spraying
solvents to clean
engines and other
machinery. Brass body.
Ten inch nozzle/tube
length. Has flexible
tubing with hose clamp
for siphoning solvent from container. Requires 14 CFM air at
50 PSI. 1/4” NPS (m) air inlet.
Part Sheet: 1191
Additional Spray Guns (cont’)
AA1500 Air-Assisted
Airless Spray Gun
The unique tip and air cap design
of this new spray gun allows
operators to use lower fluid and
air pressure than the competition
to achieve a superior finish.
Max. Fluid Pressure: 1500 psi/105 bar
Max. Air Pressure:
100 psi/6.8 bar
Gun Body:
Forged Aluminum
Fluid Path:
Stainless Steel
Fluid Shut Off Type: Stainless Steel Ball
Standard UHMW Seat or Optional Tungsten
Carbide
Fluid Inlet Size:
1/4” NPS (m) Thread
Air Inlet Size:
1/8” NPT (m) x 3/8” O.D.
Push-In - Tube Fitting or D.M. Nipple
Gun Weight:
16 oz./500 g
AA4000 Air Assisted Airlesss HVLP
The unique tip and air cap design of the new Binks AA 4000 Air
Assisted Airless HVLP Spray
Gun allows operators to use
lower fluid and air pressure
than the competition to achieve
an exceptionally fine finish.
Maximim Fluid Pressure: 4000
PSI / 275 bar
Maximum Air Pressure: 100 PSI /
6.8 bar
Body: Forged aluminum
Weight: 16 oz.
Air Inlet: 1/8” NPT (M) x 1/4” NPS
(M)
Fluid Inlet: 1/4” NPS (M) Thread
Feed Type: Siphon Feed
Part Sheet: 2776
Wren Airbrush
Single action style. Air and fluid
are delivered simultaneously.
Wren Outfits
Set No. 1 Includes airbrush,
1/2 fl. oz. color bottle
59-10022 “C” Airbrush
Set No. 2 Includes airbrush, 1/4, 1/2 and 2 fl. oz. color bottle
assemblies, 6’ lightweight vinyl hose with connections and
case.
59-10006 “B” Airbrush
Airless 1 Spray Gun
The Binks Airless 1 spray gun is a
heavy-duty professional spray gun.
Short, two finger trigger and low pull
effort give a natural feel. A thumb operated
safety trigger lock permits one hand locking
and unlocking.
Body:
Weight:
Air Inlet:
Fluid Inlet:
Fluid Passage:
Feed Type:
Part Sheet:
Gun Repair Kit:
Drop-Forged Anodized Aluminum
27 Ounces
N/A
1/4” NPS (M)
Stainless Steel
High Pressure - 6000 psi max. working
2340
6-236
Accessories
Enhance the versatility of your Airless 1 Gun with Binks
service-proven accessories.
Twist-Tip Nozzle Cleaner
Light-weight, stainless steel, Twist-tip assembly makes nozzle
cleaning easy.
Adjust-a-Fan
Spray patterns from 4 to 22 inches wide.
Nozzle Extensions
Attache to airless guns for access to hard-to-reach areas.
Airless Gun Swivel
72-780 1/4 NPS (m) x 1/4 NPS (f) Swivel Nut.
Adjust-a-Fan
Model No.
Material to be sprayed
54-3280
54-3285
54-3290
54-3295
Lacquers and Stains
Latex and Enamels
High Builds
Extremely Heavy
Orifice Range
(inches)
.007 to .019
.011 to .026
.017 to .035
.021 to .054
Features include: Single
acting style; simple to
operate; easy to maintain;
versatile
Wren Outfit includes:
Airbrush, 1/4, 1/2 and 2 fluid
oz. color bottle assemblies
and 59-60 (6 ft.) of lightweight vinyl hose with connections,
packed in an attractive, clear plastic case
43
Airless Twist Tips
State of the art twist tip assemblies to fit all brands of airless guns. Binks twist tip assemblies can also be used as direct
replacements for the most popular brans of airless twist tips on the market. Binks twist tips meet all the needs of
residential, commercial and industrial painting contractors. High quality tungsten allows for non-distorted spray
patterns and high paint volume output before tip replacement is necessary. The chart at below reflects the most
common tips for the professional painting industry.
Surface
Coating
Fan Width
(in inches)
.009
.011
.013
Orifice Size
.015
.017
Wood Interior
Stain, Sanding
Cabinets, Paneling Sealer, Lacquer
Varnish, Shellac
Enamels
6”
8”
10”
12”
309
-
311
-
313
413
-
315
-
Interior Walls
Ceilings, Drywall
Plaster
Latex, Vinyl
Acrylic
6”
8”
10”
12”
-
-
513
-
Overhang
Primers,
Enamels
6”
8”
10”
12”
-
-
6”
8”
10”
12”
-
Masonry Block
Stucco, Concrete
Vinyl, Acrylic
Latex, Oil Base
Alkyds
.019
.021
.023
-
-
-
-
415
515
615
417
517
617
419
519
619
-
-
-
315
415
515
-
417
517
-
-
-
-
619
-
-
-
-
-
519
-
521
621
-
-
417
517
-
-
Wood Exterior
Shingle Siding,
Shiplap
Exterior, Stains
Latex, Vinyl
Acrylic
6”
8”
10”
12”
-
-
-
-
517
-
519
-
521
621
-
Open Joist
Ceiling Areas
MIL White
HI Build
6”
8”
10”
12”
-
-
-
-
-
519
-
521
523
BASE RETAINERS
Assembly
454-3
Number
3/4-20(B)
Binks
454-5
7/8-14(G)
Binks, Graco,
Titan, Wagner
454-6
11/16-16(F)
AMSpray, Spray
Tech, Wagner
Ordering: For twist tips add the prefix 454-to size tip
selected. For example, if you select 517, order as 454-517.
Flat tips also available to order add 9-as a prefix. For
example, if you select 413, order as 9-413.
Airless Paint Spray Hose
Airless Hose
Size
1/4”
50 FT.
71-3531
Size
3/16”
30” Whip
71-8360
Bulk Package (100 Units 71-3531) Connector
72-691 1/4” NPS
Assembly Only
Connector
1/4” NPS (F) x
1/4” NPS (M)
Hose I.D. 1/4”
Connection Thread:
Hose Connection:
Spring Guards:
Reinforcement:
Operating Temp:
Min. Bend Radius:
Working Pressure:
Burst Pressure:
44
1/4” NPS (f)
Swivel both ends
Both ends
Static conducting
Polyurethane cover
Nylon inner tube
Braided textile yarn
(0oF to + 200oF)
2.5 In.
3,300 psi
13,200 psi
Spray Gun Extensions
CLEARANCE
NOZZLE SET-UP
(INCHES)
OPTIONAL LENGTHS
EA
1 3/4
EB
EN
MODEL DIAMETER
C
HC
PART SHEET
MODEL
REFERENCE
Std. External or Internal Mix
9, 15, 24, 36
2001
95, 95A
1368
2659, 2660
3
6, 12, 18, 24
2001
95, 95A
1370
2659, 2660
2 1/2
6, 12, 18, 24
36, 48, 60, 72, 84
2001
95, 95A
1372
2659, 2660
3/4
Circular (360o)
6, 9, 12, 15, 18, 24,
30, 36, 48, 60, 72, 84
2001
95, 95A
1367, 2082
2659, 2660
3/8
Circular (360o)
9, 12, 18, 27
33, 39, 51, 63, 75, 87
2001
95, 95A
1328
2659, 2660
1 3/8
Special for Pipe Interior
Circular 360o
1/4 in. Pipe not included
Gun not
required
90o
SC
52-1382
FOR GUN
(INCHES)
High volume material flow
CALL
MAIL
Toll-Free
your order
800-365-7565 12834 Gravois Rd.
to order
St. Louis, MO 63127
FAX
your order
314-729-7099
E-MAIL
your order
[email protected]
WEBSITE
Visit our site
www.fluidair.com
and link to
www.gsa.gov
45
Spray Gun Cups
Pressure Cups
Steadi-Grip 2 Cups
Model 80-600
SG-2 (Steadi-Grip 2) Two Quart Pressure
Cup
Part Sheet: 77-2841
Siphon Cups
1 Qt. Solvent Saver Cup
Cup features exclusive non-stick coating inside and out that
wipes clean in seconds. Fits Spray Gun Models 95, 2001, and
the MACH 1 Series of
handguns.
Model 81-800 (not shown)
One Quart Drip Proof clamp type with extra vent tube
3/8” NPS (f).
Shipping weight 16 ozs.
Part Sheet: 77-2794
Model 80-601/80-651
SG-2 (Steadi-Grip 2) Two Quart Pressure Agit Cup
Part Sheet: 77-2841
Model 81-810 (not shown)
One quart drip proof cup features
an exclusive non-stick coating
inside the cup that wipes clean in
seconds. Fits Binks Model 7, 95,
2001 and other similar spray guns.
Part Sheet: 77-2795
Model 80-295
Two Quart “Steadi-Grip” aluminum pressure
cup with fluid pressure regulator and gauge,
and hook handle. shipping weight 3.5 lbs.
Part Sheet: 77-2823R-1
Model 80-296
Fifty ounce stainless steel
pressure cup and 1 regulator.
Part Sheet: 77-2824
Model 80-511
One Quart
stainless steel pressure cup and 15
PSI regulator. Part sheet: 77-2820
Model 80-294
One Quart. Furnished with pressure
regulator and gauge 50 PSI max.
Shipping weight 3 lbs.
Part sheet: 77-2822
Model 81-540
Eight Ounce clamp type.
Shipping Weight 8 oz. 1/4” NPS (F)
Part Sheet: 77-1261
72-55 Adapter for 3/8” NPS (f)
connection to spray gun
Accessories for Steadi-Grip 2
80-356 Qty. pack of 12 disposable liners for
80-600, 80-601 and 80-651
80-392 EPDM gasket for 80-600, 80-601 and
80-651
46
PT ASME Code Tanks
Economical
ASME certification makes the Binks PT Series the only economical code tanks available in the marketplace that meet OSHA
regulations for using flammable and combustible materials.
Zinc Plated for Solvent-Based
Coatings
Ideal for solvent-based coatings.
Optional disposable tank liner. Zinc
plated lid and all wetted parts in lid
assembly including: fluid tube, lid
bushing, outlet elbow and fitting, and
agitator shaft. Zinc plated tank shell.
Zinc Plated Lid and Tank Shell
Zinc Plated Throughout, including Lid,
Wetted Parts and Tank Shell
AIR
REGULATION
FLUID
AGITATION
UP TO 2.8 GAL
83C
Single Reg
No Agitation
83C-210
Double Reg
No Agitation
83C-220
Stainless Steel and Zinc
for Waterborne Coatings
Ideal for waterborne coatings when
used with a disposable tank liner. 300
grade stainless steel lid and all wetted
parts in lid assembly including: fluid
tube, lid bushing, outlet elbow and
fitting, and agitator shaft. Zinc plated
tank shell. One disposable tank liner
included.
Stainless Steel Lid and Zinc
Plated Tank Shell
Stainless steel lid, including all wetted
parts; tank shell is zinc plated
AIR
REGULATION
Single Reg
Std. Agitation(D) 83C-211
Single Reg
Binks new stainless and zinc ASME
certified PT Series Tanks are economical and designed for use with waterborne and flammable materials that
can be applied at less than 80 PSI.
Double Reg
Std. Agitation(D) 83C-221
Double Reg
All PT Series tanks feature a 2.8 gallon
capacity and low profile tank design
which accepts U.S. and Canadian
one-gallon pails.
NOTE: The air regulator(s) and gauge(s)
are shipped inside the tank to prevent
damage in shipping. Service Bulletin
Disposable Liner
Service Bulletin
PT-78-K10 or K60
SBBI-21-044
(D)=Direct Drive Agitator: Uses direct
mount air motor and air adjusting valve.
SBB1-21-044
Specifications
Maximum Working Pressure ..... 80 PSI
Fluid Outlet .......................... 3/8” NPS
Air Inlet ................................ 1/4” NPS
FLUID
AGITATION
UP TO 2.8 GAL
83C
No Agitation
83Z-210
No Agitation
83Z-220
Single Reg
Std. Agitation(D) 83Z-211
Double Reg
Std. Agitation(D) 83Z-221
Disposable Liner
Service Bulletin
PT-78-K10 or K60
SBBI-21-043
D)=Direct Drive Agitator: Uses direct
mount air motor and air adjusting valve.
NOTE: The air regulator(s) and gauge(s)
are shipped inside the tank to prevent
damage in shipping. Service Bulletin
SBB1-21-043
Binks Disposable Tank Liners
For 83C and 83Z Binks tanks use either the 2.8 gallon tank liner
PT-78-K10, quantity of 10 liners (1 box of 10) or use the 2.8 gallon tank liner
PT-78-K60, quantity of 60 liners. (1 box of 60).
47
PT ASME Code Tanks
Economical
2 Gallon PT ASME Code Tanks Zinc Plated Lid and Tank Shell
Zinc Plated Throughout, Including Lid, Wetted Parts and Tank Shell
Inside
Diameter
Inside
Ht. at Ctr.
Overall
Height
Overall
Width
Shipping
Weight
for Tank
Assembly
Head
Gasket
Disposable
Liner
83C-210
9 1/2”
9 9/16”
10 1/2”
13 3/8”
29
PT-33-1
83C-220
9 1/2”
9 9/16”
10 1/2”
13 3/8”
31
83C-211
9 1/2”
9 9/16”
10 1/2”
13 3/8”
83C-221
9 1/2”
9 9/16”
10 1/2”
13 3/8”
2-Gal Tank
Actual
Capacity
2.8 Gallons
Part
Number
Bottom
Outlet
Kit
Service
Bulletin
Reference
K10 or K60
None
SBBI-21-044
PT-33-1
K10 or K60
None
SBBI-21-044
36
PT-33-1
K10 or K60
None
SBBI-21-044
38
PT-33-1
K10 or K60
None
SBBI-21-044
Bottom
Outlet
Kit
Service
Bulletin
Reference
(PT-78)
2 Gallon PT ASME Code Tanks Stainless Steel Lid and Zinc Plated Tank Shell
Stainless steel lid, including all wetted parts; tank shell is zinc plated
Inside
Diameter
Inside
Ht. at Ctr.
Overall
Height
Overall
Width
Shipping
Weight
for Tank
Assembly
Head
Gasket
Disposable
Liner
83Z-210
9 1/2”
9 9/16”
10 1/2”
13 3/8”
29
PT-33-1
K10 or K60
None
SBBI-21-043
83Z-220
9 1/2”
9 9/16”
10 1/2”
13 3/8”
31
PT-33-1
K10 or K60
None
SBBI-21-043
83Z-211
9 1/2”
9 9/16”
10 1/2”
13 3/8”
36
PT-33-1
K10 or K60
None
SBBI-21-043
83Z-221
9 1/2”
9 9/16”
10 1/2”
13 3/8”
38
PT-33-1
K10 or K60
None
SBBI-21-043
2-Gal Tank
Actual
Capacity
2.8 Gallons
Part
Number
(PT-78)
Head Gaskets
48
Gasket
Material
2 Gal.
P T Tank
Part No.
Santoprene®
PT-33-1
Binks offers Santoprene® lid gaskets in
place of the standard Thiokol gasket.
Injection molded of new hi-tech materials.
Santoprene is highly chemical resistant
Stainless Steel Tanks
The Best Long-Term Value
Binks Stainless Steel Pressure Tanks
are suitable for virtually all fluids and
solvents. They are ASME certified and
permanently labeled for 110 PSIG
maximum working pressure.
Tanks and lids are constructed of
heavy gauge 304 stainless steel and are
also electropolished. All models are
equipped with top outlet and bottom
outlet plug which can be adapted for
bottom outlet
Additionally, these tanks are fitted
with 100% stainless steel non-corrosive
and non-corroding wetted parts
Specifications
All stainless steel tanks and
lids are precison crafted of heavy
gauge 304 stainless and are
electropolished. All models are
equipped with a bottom outlet plug.
Additionally, these tanks are fitted with
100% stainless steel non-corrosive and
non-corroding wetted parts.
Binks stainless steel pressure
tanks are designed and built to prevent
corrosion-contamination, an inherent
problem with waterborne coatings. For
maximum cleanliness, use with Binks
disposable tank liners.
Binks 5 gallon tanks accept
standard and imperial 5-gallon
shipping pails. 2 gallon tanks accept
1-gallon pails only.
Maximum Working Pressure ... 110 PSI
Fluid Outlet, Top .................. 3/8” NPS
Fluid Oulet Plug, Bottom ........ 1” NPT
Air Inlet ................................ 1/4” NPS
Ideal for Waterborne Coatings
Binks Stainless Steel pressure tanks are
designed to prevent corrosioncontamination, an inherent problem
with waterborne coatings. These tanks
are all stainless steel, including fittings,
and should be used with a Binks
disposable liner for maximum cleanliness. Material handling components
such as fluid regulators, filters and
agitators should also be of stainless
steel. We also recommend you use
hose and tubing connections/fittings
made of stainless steel, nylon or brass.
Other Considerations
Waterborne coatings are shear
sensitive to being stirred and pumped.
Stirring and pumping can degrade
some waterborne coatings. Binks
pumps, however, are designed for
extremely low shear characteristics.
A Binks oscillating agitator is recommended for keeping pigment in
suspension without degrading the
material. Binks fluid regulators and
filters are also recommended for their
minimal low shear characteristics.
Bottom Outlet
Conversion Kits
These fittings allow a standard top outlet
tank to feed from the bottom by removing
the plug in the bottom port. Available in
stainless steel only.
TANKS
SIZE
ACTUAL STAINLESS STEEL
CAPACITY
PART NO.
SHIP WT.
2 Gal. 2.8 Gal.
5 Gal
QMS-435
3 lbs.
9.8 Gal.
QMS-443
4 lbs.
10 Gal. 11.8 Gal.
QMS-443
4 lbs.
15 Gal. 19.8 Gal.
QMS-443
4 lbs.
Stainless Steel
Bottom outlet plug and opening in skirt standard
AIR
REGULATORS
FLUID
AGITATION
Single Reg
Double Reg
Single Reg
Double Reg
Single Reg
Disposable Liner
Service Bulletin
No Agitation
No Agitation
Std. Agitation
Std. Agitation
Opt. Agitation
SMALL TANK
UP TO 2.8 GALLONS
83S-2XX
MEDIUM TANK
UP TO 9.8 GALLONS*
83S-5XX
LARGE TANK
UP TO 11.8 GALLONS
83S-10XX
XL TANK
UP TO 19.8 GALLONS
83S-15XX
83S-210
83S-220
83S-211 (D)
83S-221 (D)
83S-213 (I)
PT-78K10 or K60
SBBI-21-068
83S-510
83S-520
83S-513(I)
83s-523 (I)
83S-516 (R)
PTL-408-K20
SBBI-21-070
83S-1010
83S-1020
83S-1013 (I)
83S-1023 (I)
83S-1016 (R)
PTL-412-K8
SBBI-21-064
83S-1510
83S-1520
83S-1513
83S-1523
83S-1516
PTL-415-K10
SBBI-21-064
When combined with the use of disposable liners, there is no more
economical way to run a paint operation for most applications.
For 83S-2XX Binks tanks use either the 2.8 gallon tank liner PT78-K10, quantity of 10 liners or use the 2.8 gallon tank liner PT78-K60, quantity of 60 liners. For 83S-10XX Binks tanks use the
11.8 gallon tank liner PTL-412-K8, quantity of 8 liners. For 83S150XX Binks tanks use the 19.8 gallon tank liner PTL-415-K10,
quantity of 10 liners.
(D) - Direct Drive Agitator: Uses direct mount air mount and air adjusting valve.
(I) - Indirect Drive Agitator: Uses Motor coupled to gearbox for higher torque at lower
speeds.
(R) - Reciprocating Agitator: Self-Reversing Air Motor for efficient mixing and
reducing cavitation.
* - Binks 11.8 gallon tanks accept standard and imperial 5-gallon shipping pails.
NOTE: The air regulator(s) and gauge(s) are shipped inside the tank to prevent damage
in shipping.
49
Stainless Steel Tanks - The Best Long-Term Value
2 Gallon Stainless Steel Tanks Bottom Outlet Plug and Openings in Skirt Standard
2-Gal Tank
Actual
Capacity
2.8 Gallons
Part
Number
83S-210
Inside
Diameter
Inside Ht.
at Center
Overall
Height
Overall
Width
Shipping
Weight
for Tank
Assembly
Head
Gasket
Disposable
Liner
9 1/2”
9 1/2”
13 3/16”
13 3/8”
39
QMS-80-1
13 3/8”
42
Bottom
Outlet
Kit
Service
Bulletin
Reference
K10 or K60
QMS-435
SBBI-21-068
QMS-80-1
K10 or K60
QMS-435
SBBI-21-068
(PT-78)
83S-220
9 1/2”
9 1/2”
13 3/16”
83S-211
9 1/2”
9 1/2”
13 3/16”
13 3/8”
46
QMS-80-1
K10 or K60
QMS-435
SBBI-21-068
83S-221
9 1/2”
9 1/2”
13 3/16”
13 3/8”
49
QMS-80-1
K10 or K60
QMS-435
SBBI-21-068
83S-213
9 1/2”
9 1/2”
13 3/16”
13 3/8”
56
QMS-80-1
K10 or K60
QMS-435
SBBI-21-068
Bottom
Outlet
Kit
Service
Bulletin
Reference
5-Gal Tank
Actual
Capacity
9.8 Gallons
Part
Number
83CS510
83S-520
Inside
Diameter
Inside
Ht. at Ctr.
Overall
Height
Overall
Width
Shipping
Weight
for Tank
Assembly
Head
Gasket
Disposable
Liner
71
QM-1458-1
(PT-78)
PTL-408-K20
14”
16”
20 5/16”
18 1/2”
QMS-443
SBBI-21-070
14”
16”
20 5/16”
18 1/2”
74
QM-1458-1
PTL-408-K20
QMS-443
SBBI-21-070
89
QM-1458-1
83S-513
14”
16”
20 5/16”
18 1/2”
PTL-408-K20
QMS-443
SBBI-21-070
83S-523
14”
16”
20 5/16”
18 1/2”
92
QM-1458-1
PTL-408-K20
QMS-443
SBBI-21-070
18 1/2”
95
QM-1458-1
PTL-408-K20
QMS-443
SBBI-21-070
Bottom
Outlet
Kit
Service
Bulletin
Reference
83S-516
14”
16”
20 5/16”
10-Gal Tank
Inside
Actual
Diameter
Capacity
11.8 Gallons
Part
Number
Inside
Ht. at Ctr.
Overall
Height
Overall
Width
Shipping
Weight
for Tank
Assembly
Head
Gasket
Disposable
Liner
(PT-78)
83S-1010
14”
19 1/6”
23 3/8”
18 1/2”
75
QM-1458-1
PTL-412-K8
QMS-443
SBBI-21-064
83S-1020
14”
19 1/6”
23 3/8”
18 1/2”
78
QM-1458-1
PTL-412-K8
QMS-443
SBBI-21-064
83S-1013
14”
19 1/6”
23 3/8”
18 1/2”
93
QM-1458-1
PTL-412-K8
QMS-443
SBBI-21-064
83S-1023
14”
19 1/6”
23 3/8”
18 1/2”
96
QM-1458-1
PTL-412-K8
QMS-443
SBBI-21-064
83S-1016
14”
19 1/6”
23 3/8”
18 1/2”
97
QM-1458-1
PTL-412-K8
QMS-443
SBBI-21-064
Bottom
Outlet
Kit
Service
Bulletin
Reference
Inside
Ht. at Ctr.
Overall
Height
Overall
Width
Shipping
Weight
for Tank
Assembly
Head
Gasket
Disposable
Liner
29 1/16”
33 13/16”
18 1/2”
98
QM-1458-1
(PT-78)
PTL-415-K10
QMS-443
SBBI-21-064
83S-1513
14”
29 1/16”
33 13/16”
18 1/2”
101
QM-1458-1
PTL-415-K10
QMS-443
SBBI-21-064
83S-5123
14”
29 1/16”
33 13/16”
18 1/2”
116
QM-1458-1
PTL-415-K10
QMS-443
SBBI-21-064
83S-1516
14”
29 1/16”
33 13/16”
18 1/2”
118
QM-1458-1
PTL-415-K10
QMS-443
SBBI-21-064
14”
29 1/16”
33 13/16”
18 1/2”
120
QM-1458-1
PTL-415-K10
QMS-443
SBBI-21-064
15-Gal Tank
Inside
Actual
Diameter
Capacity
19.8 Gallons
Part Number
83S-1510
14”
83S-1520
Gasket
Material
Santoprene
50
2 Gal.
Galv./SS
Part No.
QMS-80-1
5 Gal.
Galv./SS
Part No.
QM-1458-1
10 Gal
Galv./SS
Part No.
QM-1458-1
15 Gal.
Galv./SS
Part No.
QM-1458-1
HEAD GASKET - Binks offers Santoprene® lid gaskets in
place of the standard Thiokol gasket. Injection molded of
new hi-tech materials. Santoprene is highly chemical
resistant.
Galvanized Tanks
Ideal for Most Applications
Galvanized steel tanks are primarily
used with non-corrosive materials.
Constructed with a heavy pressed steel
lid and forged steel clamps, galvanized
tanks are equipped with top outlet and
bottom outlet plug, which can be
adapted for bottom outlet. The bottom
outlet is recommended for heavy,
viscous materials such as emulsified
asphalts, cut-back asphalts, rubber
compounds, etc.
Bottom Outlet
Conversion Kits
These fittings allow a standard top outlet
tank to feed from the bottom by removing
the plug in the bottom port. Available in
stainless steel only.
TANKS
SIZE
Specifications
Maximum Working Pressure ... 110 PSI
Fluid Outlet, Top .................. 3/8” NPS
Fluid Oulet Plug, Bottom ........ 1” NPT
Air Inlet ................................ 1/4” NPS
ACTUAL
CAPACITY
STAINLESS STEEL
PART NO.
SHIP WT.
2 Gal.
2 Gal.
QMS-435
3 lbs.
5 Gal
5 Gal.
QMS-443
4 lbs.
10 Gal. 10 Gal.
QMS-443
4 lbs.
15 Gal. 15 Gal.
QMS-443
4 lbs.
Binks galvanized tanks are built to the highest quality standards. Our
team of experts - engineers, designers, technicians and customer service professionals - is constantly working to bring you the quality, efficiency, performance and
value you expect from one of the world’s most recognized spray finishing brands.
Binks galvanized tanks are primarily used with non-corrosive materials.
Constructed with a heavy pressed steel lid and forged steel clamps, galvanized tanks
have ports for both bottom and top fluid outlets.
All galvanized tank models are ASME certified for working pressure. Lids
disassembled easily-no special tools are required-and all models are easy to service
and clean.
Stainless Steel
Bottom outlet plug and opening in skirt standard
AIR
REGULATORS
FLUID
AGITATION
Single Reg
Double Reg
Single Reg
Double Reg
Single Reg
Disposable Liner
Service Bulletin
No Agitation
No Agitation
Std. Agitation
Std. Agitation
Opt. Agitation
SMALL TANK
UP TO 2.8 GALLONS
83S-2XX
MEDIUM TANK
UP TO 9.8 GALLONS*
83S-5XX
LARGE TANK
UP TO 11.8 GALLONS
83S-10XX
XL TANK
UP TO 19.8 GALLONS
83S-15XX
83S-210
83S-220
83S-211 (D)
83S-221 (D)
83S-213 (I)
PT-78K10 or K60
SBBI-21-068
83S-510
83S-520
83S-513(I)
83s-523 (I)
83S-516 (R)
PTL-408-K20
SBBI-21-070
83S-1010
83S-1020
83S-1013 (I)
83S-1023 (I)
83S-1016 (R)
PTL-412-K8
SBBI-21-064
83S-1510
83S-1520
83S-1513(I)
83S-1523(I)
83S-1516(R)
PTL-415-K10
SBBI-21-064
When combined with the use of disposable liners, there is no more (D) - Direct Drive Agitator: Uses direct mount air mount and air adjusting
economical way to run a paint operation for most applications.
valve.
(I) - Indirect Drive Agitator: Uses Motor coupled to gearbox for higher
For 83G-200 Binks tanks use either the 2.8 gallon tank liner PT- torque at lower speeds.
78-K10, quantity of 10 liners (1 bag of 10) or use the 2.8 gallon
(R) - Reciprocating Agitator: Self-Reversing Air Motor for efficient mixing
tank liner PT-78-K60, quantity of 60 liners. For 83G-1000 Binks and reducing cavitation.
tanks use the 11.8 gallon tank liner PTL-412-K8, quantity of 8
* - Binks 11.8 gallon tanks accept standard and imperial 5-gallon shipping
liners. For 83G-1500 Binks tanks use the 19.8 gallon tank liner
pails.
PTL-415-K10, quantity of 10 liners.
NOTE: The air regulator(s) and gauge(s) are shipped inside the tank to
prevent damage in shipping.
51
Galvanized Tanks - Ideal for Most Applications
2 Gallon Galvanized Tanks Bottom Outlet Plug and Openings in Skirt Standard
Inside
Diameter
Inside Ht.
At Ctr.
Overall
Height
Overall
Width
Shipping
Weight
for Tank
Assembly
Head
Gasket
Disposable
Liner
9 1/2”
9 1/2”
13 3/16”
13 3/8”
44
QMS-80-1
83G-220
9 1/2”
9 1/2”
13 3/16”
13 3/8”
47
83G-211
9 1/2”
9 1/2”
13 3/16”
13 3/8”
83G-221
9 1/2”
9 1/2”
13 3/16”
13 3/8”
83G-213
9 1/2”
9 1/2”
13 3/16”
13 3/8”
2-Gal Tank
Actual
Capacity
2.8 Gallons
Part
Number
83G-210
Bottom
Outlet
Kit
Service
Bulletin
Reference
(PT-78)
K10 or K60
QMS-435
SBBI-21-068
QMS-80-1
K10 or K60
QMS-435
SBBI-21-068
51
QMS-80-1
K10 or K60
QMS-435
SBBI-21-068
54
QMS-80-1
K10 or K60
QMS-435
SBBI-21-068
61
QMS-80-1
K10 or K60
QMS-435
SBBI-21-068
Bottom
Outlet
Kit
Service
Bulletin
Reference
5-Gal Tank
Actual
Capacity
9.8 Gallons
Part
Number
83G-510
Inside
Diameter
Inside
Ht. at Ctr.
Overall
Height
Overall
Width
Head
Gasket
Disposable
Liner
84
QM-1458-1
(PT-78)
PTL-408-K20
QMS-443
SBBI-21-070
87
QM-1458-1
PTL-408-K20
QMS-443
SBBI-21-070
QMS-443
SBBI-21-070
Shipping
Weight
for Tank
Assembly
14”
16”
20 5/16”
18 1/2”
83G-520
14”
16”
20 5/16”
18 1/2”
83G-513
14”
16”
20 5/16”
18 1/2”
102
QM-1458-1
PTL-408-K20
83G-523
14”
16”
20 5/16”
18 1/2”
105
QM-1458-1
PTL-408-K20
QMS-443
SBBI-21-070
QM-1458-1
PTL-408-K20
QMS-443
SBBI-21-070
Bottom
Outlet
Kit
Service
Bulletin
Reference
83G-516
14”
16”
20 5/16”
18 1/2”
106
10-Gal Tank
Inside
Actual
Diameter
Capacity
11.8 Gallons
Part
Number
14”
83G-1010
Inside
Ht. at Ctr.
Overall
Height
Overall
Width
Shipping
Weight
for Tank
Assembly
Head
Gasket
Disposable
Liner
19 1/16”
23 3/8”
18 1/2”
90
QM-1458-1
PTL-412-K8
(PT-78)
QMS-443
SBBI-21-062
83G-1020
14”
19 1/16”
23 3/8”
18 1/2”
93
QM-1458-1
PTL-412-K8
QMS-443
SBBI-21-062
83G-1013
14”
19 1/16”
23 3/8”
18 1/2”
108
QM-1458-1
PTL-412-K8
QMS-443
SBBI-21-062
83G-1023
14”
19 1/16”
23 3/8”
18 1/2”
111
QM-1458-1
PTL-412-K8
QMS-443
SBBI-21-062
83G-1016
14”
19 1/16”
23 3/8”
18 1/2”
112
QM-1458-1
PTL-412-K8
QMS-443
SBBI-21-062
Bottom
Outlet
Kit
Service
Bulletin
Reference
15-Gal Tank
Inside
Actual
Diameter
Capacity
19.8 Gallons
Part
Number
83G1510
14”
Inside
Ht. at Ctr.
Overall
Height
Overall
Width
Shipping
Weight
for Tank
Assembly
Head
Gasket
Disposable
Liner
29 1/16”
33 13/16”
18 1/2”
115
QM-1458-1
(PT-78)
PTL-415-K10
QMS-443
SBBI-21-062
PTL-415-K10
QMS-443
SBBI-21-062
83G-1520
14”
29 1/16”
33 13/16”
18 1/2”
118
QM-1458-1
83G-1513
14”
29 1/16”
33 13/16”
18 1/2”
133
QM-1458-1
PTL-415-K10
QMS-443
SBBI-21-062
83G-5123
14”
29 1/16”
33 13/16”
18 1/2”
136
QM-1458-1
PTL-415-K10
QMS-443
SBBI-21-062
83G-1516
14”
29 1/16”
33 13/16”
18 1/2”
137
QM-1458-1
PTL-415-K10
QMS-443
SBBI-21-062
Gasket
Material
Santoprene
52
2 Gal.
Galv./SS
Part No.
QMS-80-1
5 Gal.
Galv./SS
Part No.
QM-1458-1
10 Gal
Galv./SS
Part No.
QM-1458-1
15 Gal.
Galv./SS
Part No.
QM-1458-1
HEAD GASKET - Binks offers Santoprene® lid gaskets in
place of the standard Thiokol gasket. Injection molded of
new hi-tech materials. Santoprene is highly chemical
resistant.
Galvanized and Stainless Tanks Steel Fitted Tanks
Large Capacity - 30 - 60 Gallon
Standard Galvanized Units
Ideal for most applications
Binks large capacity Galvanized Tanks are ASME certified. They are the best choice
when applying large quantities of coatings materials. These 30-60 gallon tanks can
accomodate multiple spray guns. They are also well-suited to line-striping operations. These tanks are made of galvanized steel and are primarily used with noncorrosive materials. Constructed with a heavy pressed steel lid and forged steel
clamps, galvanized tanks have ports for both bottom and top fluid outlets. The
bottom outlet is recommended for heavy, viscous materials such as emulsified
asphalts, cutback asphalts, rubber compounds, etc.
Standard Galvanized
Tank Model
Number
83-5801
83-5807
Tank
Capacity
30 Gallon
30 Gallon
Air
Regulations
Single Reg
Single Reg
Fluid
Agitation
No Agitation
With Agitation
Part
Sheet
1345
1347
Head
Gasket
83-2120
83-2120
Dual Bottom
Outlet Kit
83-4229
83-4229
83-5701
83-5707
60 Gallon
60 Gallon
Single Reg
Single Reg
No Agitation
With Agitation
1324
1322
83-2122
83-2122
83-4230
83-4230
Specifications
Maximum Working Pressure ............. 110 PSI
Fluid Outlet, Top .............................. 3/8” NPS
Fluid Outlet Bottom ........................... 1” NPT
Bottom Outlet Kit, Fluid Outlets .... 3/8” NPS
Air Inlet ............................................. 1/4” NPS
NOTE: Agitated tanks indirect drive uses air motor gearbox for higher torque at low speeds. All tanks have 2 top
outlets. All tanks have a plug and opening in skirt for bottom outlet.
Stainless Steel Fitted Galvanized Units
Ideal for waterborne and corrosive mateials
For use with latex, ceramics, and other corrosive fluid materials. Tank heads are hot
tin dipped; shells are galvanized. Inner containers (order separately) and all parts
that come in contact with material are of stainless steel.
Galvanized (order stainless steel inner container separately.)
Tank Model
Number
83-5873
83-5879
Tank
Capacity
30 Gallon
30 Gallon
Air
Regulations
Single Reg
Single Reg
Fluid
Agitation
No Agitation
With Agitation
Part
Sheet
1346
1348
Head
Gasket
83-2121
83-2121
Dual Bottom
Outlet Kit
83-4229
83-4229
83-5773
83-5779
60 Gallon
60 Gallon
Single Reg
Single Reg
No Agitation
With Agitation
1323
1321
83-2123
83-2123
83-4230
83-4230
Installing Second Regulator
Large Capacity Tank requires two regulators for
optimal performance. One regulator controls
fluid pressure and the other regulator contols air
to the spray gun only.
For maximum value, purchase the following:
QMS-436
NOTE: Agitated tanks indirect drive uses air motor gearbox for higher torque at low speeds. All tanks have 2 top
outlets. All tanks have a plug and opening in skirt for bottom outlet.
30 Gallon and 60 Gallon Top or Bottom Outlet SS Inner Containers
Inner Containers
(Stainless Steel (order separately)
Part No. ...................................... Description
83-1569 ..................... 30 Gallon - Top Outlet
83-2230* ............. 30 Gallon - Bottom Outlet
83-1581 ..................... 60 Gallon - Top Outlet
83-2229* ............. 60 Gallon - Bottom Outlet
* Includes bottom outlet hardware
53
Tank Accessories
Indirect Air Motor Drive
Heavy Duty Model 83-2476
Model QS-5012
Standard duty,
smooth running with
gear reducer, 1/2 hp,
15:1 ratio, 20 to 120
RPM. Includes
throttling valve, fittings, and hose for
connection to air supply on tank lid. Air
consumption approximately 6 CFM@50
RPM. For 2, 5, 10 and 15 gallon tanks
only. Service Bulletin SBBI-19-087
Heavy duty Air Motor
Drive Unit with gear
reducer. 1 H.P., 30:1
Ratio, 15 to 50 RPM
output. Shipping
weight 20 lbs. Part Sheet 1622. For 30 &
60 gallon tanks only.
Reciprocating Air Motor Drive
Model 31-381
Slow 180-degree
back and forth
action ensures
excellent
agitation. Uses
50% less air than
rotary type air motors. 22.25 ft. lbs.
torque at 72.5 psi. Air consumption:
Approximately 1 CFM @ 10 cycles per
minute. The Binks Reciprocating Air
Motor Drive features a wide adjustment
range of 10-30 cycles per minute. It
virtually eliminates trapped air, and
shear-sensitive coatings are not affected
by its gentle yet effective agitation. For
2, 5, 10 & 15 gallon tanks only. Part
Sheet 77-2788
Agitator Drives
(for 30 & 60 gallon tanks only)
Direct Drive Agitator
Air-powered direct
drive agitator
assembly with 1/2
hp air motor and a
three-bladed
propeller to keep
materials mixed in suspension, even
high solids. Use on two gallon models.
Must order air motor and shaft separately.
83Z Series Stainless Steel
Model PT-427 - air motor
Model PT-419 - shaft assembly
83C Series Zinc Plated
Model PT-418 - air motor
Model PT-428 - shaft assembly
83S and 83G Series
Refer to part sheets on tank
Y-Strainer Inline Fluid Filter
Nickel plated body with Stainless Steel
element, good for solvent or waterborne
materials. Low Pressure. 3/8” NPS (f)
swivel inlet x 3/8” NPS (m) outlet.
Standard Model 31-396
Air Motor Drive Unit with
gear reducer: 1/2 H.P., 15:1
Ratio, 40 RPM max.
Shipping weight 20 lbs.
Part Sheet 2804. For 30 and
60 gallon tanks only and 55
gallon drums only.
Model No. Mesh
30
50
80
100
150
200
83-2922
83-2923
83-2924
83-2925
83-2926
Microns
590
297
177
149
96
74
SS Screen
Element
83-2705
83-2089
83-2596
83-1256
83-2405
83-2706
Air Regulator/Gauge
Assembly Kits
(for galvanized and stainless tanks only,
not 83C or 83Z)
Model QMS-436: One gauge, one
regulator. Converts single regulation to
dual.
Model QMS-4006: One gauge, one
regulator. Regulates and indicates tank
pressure.
Model QMS-4007: Two gauges, two
regulators. Controls tank pressure and
atomization air pressure to gun.
Model 83-1290: Gauge only, range 0150 psi (for fluid)
Model 83-1355: Gauge only, range
0-150 psi (for fluid).
Model GA-333: Gauge only, range
0-100 psi (for air).
Air Regulator/Gauge
Assembly Kits
(for galvanized and stainless tanks only,
not 83C or 83Z)
Model QMS-4010: One extra sensitive
gauge and one extra sensitive regulator.
For applications requiring extremely
sensitive, non-fluctuating, low pressure
control.
Model HAR-511: Regulator only (for
fluid pressure)
Model HAR-507: Regulator only for
atomizing air pressure.
Air Gauge
(for 83C and 83Z tanks only)
Model 83-2727: Gauge only, range 0100 psi (for air)
Premium Spray Finishing Air Hose - Assemblies and Connections
Model 31-385
Oscillating Air Motor.
10 to 30 cycles per min.
22.25 ft. lbs. torque at
72.5 psi. Shipping
weight 15 lbs. Part
Sheet 2802. For 30 & 60 gallon tanks
only.
54
SIZES
I.D.
5/16”
5/16”
3/8”
3/8”
LENGTH
OF HOSE
25
50
25
50
ft.
ft.
ft.
ft.
HOSE ASSEMBLY
PART NO.
BULK HOSE
NUMBER
71-1205
71-1206
71-1355
71-1356
71-11000
71-11000
71-12000
71-12000
CONNECTION
THREAD SIZE
1/4”
1/4”
1/4”
1/4”
NPS
NPS
NPS
NPS
(F)
(F)
(F)
(F)
TYPE OF
CONNECTION
3
3
3
3
piece
piece
piece
piece
reusable
reusable
reusable
reusable
CONNECTION
PART NO.
72-1317
72-1317
72-1325
72-1325
Fluid AllTM Fluid Hose Assemblies and Connections
SIZES
I.D.
LENGTH
OF HOSE
HOSE ASSEMBLY
PART NO.
BULK HOSE
NUMBER
CONNECTION
THREAD SIZE
TYPE OF
CONNECTION
CONNECTION
PART NO.
3/8”
3/8”
25 ft.
50 ft.
71-3303
71-3304
71-282
71-282
3/8” NPS (F)
3/8” NPS (F)
3 piece reusable
3 piece reusable
72-1328
72-1328
Pumps
“Pogo” Pump
Infinity “Pogo” Pump
Specifications & Construction
Specifications (Stainless)
Lower Pump Material
316 SS
Pump Rod Material
316 SS
Cylinder Material
Stainless Steel
Packing Material
UHMW Polyethylene
Motor Diameter
2”
Stroke
6”
Air Inlet
1/4” NPT (f)
Material Inlet
Immersed (no Threads)
Material Outlet
1/2 NPT (f)
Weight
19 lbs. (8.6
kgs.)
Weight (stub)
16 lbs. (7.3 kgs.)
Lower Pump Material
316 SS
Plunger Material
316 SS
Cylinder Material Stainless Steel
Packing Set
UHMW Polyethylene
Max. 120oF Fluid Inlet Temp.
Max. 180oF Fluid Inlet Temp.
Weight Drum 19 lbs. (8.6 kgs)
Stub
16 lbs. (7.2 kgs)
Part Number (Both SS Pumps)
Part Numbers
Air Control
Bare Pump
Air Motor
Air Motor Repair Kit
Fluid Section
Stub Fluid Section
Fluid Section Repair Kit
Stub Bare Pump
41-11430
41-11431
41-11432
41-11433
41-11434
41-11435
41-11436
41-11437
Gemini Diaphragm Pump
Technical Specifications
Gemini 1/2” Series Bare Pump
Model Number:135-100
135-150
Body Construction: SS Filled Acetal
Ground Wire: 135-74
Free GPM:
135-100 (7 GPM)
135-150 (13 GPM)
Principal Use: Multi Gun Supply/
Multi Gun Supply or Fluid Transfer
Part Sheet:
135-100-2498
135-150-2561
Air Motor
Lower Motor Assembly (821300)
SS Stub
Lower Pump Repair Kit (same)
Optional Teflon Packing
873008
861034
873009
873200
861089
861038
Specifications (Carbon Steel)
Lower Pump Material
Carbon Steel
Plunger Material
Carbon Steel (chrome plated)
Cylinder Material
Carbon Steel
Packing Set
UHMW Polyethylene
Max. 120o Fluid Inlet Temp.
Max. 180oF Fluid Inlet Temp. Optional Packing
Weight
12 lbs. (5.4 kgs)
Part Numbers (Carbon Steel)
Air Motor
Lower Pump Assembly
Lower Pump Repair Kit
Optional Teflon Packing
873008
861034
873010
861035
861036
Recommended Accessories
Air Controls
Muffler
Wall Mount
1:1 Drum Pump Carbon Steel
41-15931
873191
873184
812306
55
Pumps (cont’)
Comet Hi-Vol (2.5:1) Pump Unit
Infinity 1” Diaphragm Pump
Model Number: 41-11495
Pump 818822 (SS)
Includes . . .
41-3311
41-11459
41-2414
41-5024
Gear Drive Agitator
Air Control
Drum Cover Assembly
Comet Hi-Vol Pump
Typical Applications:
This complete package is designed for open top
55 gallon drums to be used on a multi-gun
recirculating system. For short distances, add
fluid hose, fluid regulator, and spray gun. For long systems,
add the appropriate “drops”, fluid regulators and spray guns.
Infinity 1/2” Diaphragm Pump
Pump 818830 (SS), #818831 (GND
ACT) & #818833 (Polypropylene) 1/2”
Diaphragms
Part Numbers
Diaphragm Repair Kit
Ball & Seat Repair Kit
Stainless Steel (Ball/Seat)
Teflon (Ball) SS (Seat)
Air Control
Wall Mount
Siphon Hose
5 Gallon
55 Gallon
Specifications
Air Motor: Unbalanced
Wetted Pump Material: See Chart
Diaphragm Material: Teflon
Seat: 316 Stainless Steel
Balls (standard): 316 Stainless Steel
Weight: Stainless Steel
Groundable Acetal
Polypropylene
Specifications
Wetted Pump Material: See Chart
Seat: Stainless Steel
Balls (standard): Stainless Steel
Weight: Aluminum: 19 lbs. (8.62 kgs)
Stainless Steel: 36 lbs.
(16.33 kgs)
14.6 lbs (6.6 kgs)
8.8 lbs (4 kgs)
7.2 lbs. (3.3 kgs)
Part Numbers
Stainless Steel
Groundable Acetal
Polypropylene
Part #
818820
818822
Body
Aluminum
SS
862003
862020
862025
862026
849303
873115
5” Hose with Stainer
874500
874501
Construction
Seat Ball
SS
SS
SS
SS
Diaphragm
Teflon
Teflon
862004
862040
862040
862040
862045
862046
Air Control
Wall Mount
Siphon
5 Gallon
Part #
818830
818831
818833
56
Body
SS
Groundable Acetal
Polyproylene
849303
873116
5’ Hose with Stainer
874504
Construction
Seat Ball
SS
SS
SS
SS
SS
SS
Diaphragm
Teflon
Teflon
Teflon
Pumps (cont’)
Infinity Hi-Volume 3:1 Diaphragm Pump
Infinity Hi-Volume 1-1/2” Diaphragm Pump
Pump 818800 - Ratio 3:1
Pump 818810 - 1 1/2” Diaphragm
Specifications
Specifications
Wetted Pump Material: Stainless Steel
Balls (standard): Stainless Steel
Weight: Stainless Steel 95 lbs. (43 kgs)
Wetted Pump Material: Stainless Steel
Balls (standard): Teflon
Weight Stainless Steel: 84 lbs. (38.1 kgs)
Air Motor Repair Kit: 862003
Part Numbers
Part Numbers
862001
862000
Diaphragm Repair Kit:
862010
862015
862025
Air Control
Wall Mount
849303
873134
Air Control
Wall Mount
849303
873135
57
Pump Packages
Infinity Diaphragm
Wall Mount Finishing
We offer 1/2” and 1’ wall mount
packages.
All Packages include:
Wall Mount Bracket, Fluid Regulator,
2 Air Controls, and Pneumatic Shut Off
Bung Mount
Wall Mount Bulk Transfer
Bunk Mount
Packages include:
Air Control,
Mounting Plate,
Mounting Hardware,
and SS Siphon Tube
with strainer and
Fluid Regulator.
These bulk transfer/high volume
finishing pumps can efficiently transfer
finishing coatings to a day tank. The 3:1
can supply large circulating systems.
Both pumps are designed to handle
heavy abrasive coatings.
1/2” Bung Mount Pump Packages
Part #
818170
Construction
Wetted Seat Ball
SS
SS
SS
Diaphragm
Teflon
818100 3:1 Diaphragm includes:
Pump
818800
Wall Bracket
873134
Air Control
849303
1/2” Wall Mount Pump Packages
Part #
818150
Construction
Wetted Seat Ball
SS
SS
SS
Part #
818100
Diaphragm
Teflon
Construction
Wetted Seat Ball
SS
SS
SS
Diaphragm
Teflon
1” Wall Mount Pump Packages
Part #
818121
818120
Construction
Wetted Seat Ball
SS
SS
SS
Alum SS
SS
Diaphragm
Teflon
Teflon
Pail Mount
Pail Mount Packages include:
Fluid Regulator and 2 Air Controls.
Pump mounted on cover.
1/2” Pail Mount Pump Packages
Part #
818160
Construction
Wetted
Seat Ball Diaphragm
Grounded SS SS
Teflon
Acetal
818110 1-1/2” Pump includes:
Pump
Wall Bracket
Air Control
Part #
818110
58
Construction
Wetted Seat Ball
SS
SS
SS
818810
873135
849303
Diaphragm
Teflon
Pump Packages (cont’)
Infinity “N” Series
Infinity “N” Series pumps are low cost, stainless steel
pumps for light industrial air assist and airless
applications.
812190
Package Includes
• Pump
• Wall Mount Bracket
• Pneumatic Shut Off Valve
Air Assist and Airless
Part Numbers
Cart Mount Pkg.
28:1 Ratio with .38 GPM @ 60 cycles
Wall Mount Pkg.
28:1 Ratio with .38 GPM @ 60 cycles
Wall Mount Bracket
Air Controls
812180
873116
849303
Accessories not included
Siphon Hose - 5 foot hose with strainer
5 gallon
874504
812190
812180
Package Includes
• Pump
• Cart
• Pneumatic Shut Off Valve
59
Gemini 1/2” Diaphragm Pump Packages
Gemini Pump Packages 1/2”, Low Pulse - 100 PSI
Package
Number
Bare Pump
Number
Wetted
Parts
Ratio &
Size
GPM@
60 CPM
Mounting
Air Regltrs
Suction Hose
w/Bung Adapt.
Agitator
818160
818171 818831
818834
acetal, Teflon
SS, Teflon
1:1, 1/2 NPT
1:1, 1/2 NPT
1.2
1.2
pail
55 bung
2
1
pail
NR
0
0
818200
818831
acetal, Teflon
1:1, 1/2 NPT
1.2
pail
2
pail
0
1
1
0
818201
818210
818831
818831
acetal, Teflon
acetal, Teflon
1:1, 1/2 NPT
1:1, 1/2 NPT
1.2
1.2
pail
wall
2
2
pail
55 gallon
843000
0
1
1
1
1
0
0
818220
818831
acetal, Teflon
1:1, 1/2 NPT
1.2
55 drum cover
2
55 gallon
843001
1
1
0
818231
818861
818831
818834
acetal, Teflon
SS, Teflon
1:1, 1/2 NPT
1:1, 1/2 NPT
1.2
1.2
55 bung
55 bung
1
0
NR
NR
0
0
0
0
0
0
0
1
818871 818831
acetal, Teflon
1:1, 1/2 NPT
1.2
55 bung
0
NR
0
0
0
1
Mounting
Air Regltrs.
Suction Hose
w/Bung Adapt.
Agitator
Prime Pulse/ Fluid
Valve Filter Reg.
0
0
0
0
1
1
Gemini Pump Packages 1/2”, Max. Flow - 100 PSI
Package
Number
Bare Pump
Number
Wetted
Parts
Ratio &
Size
GPM@
60 CPM
Prime Pulse/ Fluid
Valve Filter Reg.
818150 818830
SS, Teflon
1:1, 1/2 NPT
2.4
wall
2
0
0
0
0
1
818170 818830
SS, Teflon
1:1, 1/2 NPT
2.4
55 bung
1
NR
0
0
0
1
818230
818860
818836
818830
acetal, Teflon
SS, Teflon
1:1, 1/2 NPT
1:1, 1/2 NPT
2.4
2.4
55 bung
55 bung
1
0
NR
NR
0
0
0
0
0
0
0
1
818870 818836
acetal, Teflon
1:1, 1/2 NPT
2.4
55 bung
0
NR
0
0
0
1
Recommended Not Shown 849303 873414 841010 84-320
Gemini 1/2” Low Pulse Spray Outfits
MODEL #98-3023
SYSTEM COMPONENT LIST
MODEL #98-3022
Item Part
Description
No. No.
1
7000-1204-4 Mach 1 SL Gun
Qty. Part
Sheet
1
2665
Item Part
Description
No. No.
1
6211-2800-7 2001 Gun
MODEL #98-3024
Qty. Part
Sheet
1
2316
Item Part
Description
No. No.
1
7000-1204-4 Mach 1 SL Gun
Qty. Part
Sheet
1
2665
2
71-1205
Air Hose Ass’y
1
---
2
71-1205
Air Hose Ass’y
1
---
2
71-1205
Air Hose Ass’y
1
---
3
71-3303
Fluid Hose Ass’y
1
---
3
71-3303
Fluid Hose Ass’y
1
---
3
71-3303
Fluid Hose Ass’y
1
---
4
818160
Gemini Pump Pkg.
1
81816X
4
818160
Gemini Pump Pkg
1
81816X
4
818210
Gemini Pump Pkg
1
81821X
General Description
This (5) gallon pail system is complete with Mach 1 SL
Gun w/94 x 94P set-up, 1:1 Gemini 1/2” diaphragm
pump w/air control and 25 ft. fluid and air hose
assemblies
60
General Description
This (5) gallon pail system is complete with 2001 Gun
w/63BSS x 63 PB, 1:1 Gemini 1/2” diaphragm pump w/
air control and 25 ft. fluid and air hose assemblies
General Description
This 55 gallon, wall mounted system comes complete
with Mach 1 SL Gun w/94 x 94P set-up, 1:1 Gemini
1/2” Low Pulse diaphragm pump, air control, 25 ft. air
and fluid hose and 55 gallon siphon kit.
Raptor Systems (Wall & Cart Mounted)
Air Assisted Airless Outfits 18:1 Ratio Pump
Raptor Systems
Wall mounted outfit - with gun and hoses
These wall -mount outfits are a complete
finishing system for stationary installations.
The small profile fits easily in tight spaces.
5 gallon (UHMWPE) packings ...... 98-3070
5 gallon (TeflonTM) packings ........ 98-3071
55 gallon (UHMW) packings ........ 98-3074
55 gallon (TeflonTM) packings ...... 98-3075
Shipping weight 21.5 lbs. (9.8 kg)
Wall mounted package - no gun or hoses
5 gallon UHMWPE packings .......... 812290
5 gallon TeflonTM packings ............ 812291
55 gallon UHMWPE packings ........ 812630
55 gallon Teflon TM packings .......... 812631
Cart mounted outfit - with gun and hoses
Cart-mounted outfit is a complete finishing
system for mobilie flexibility. this outfit
includes pump, air controls, cart, gun filter,
spray gun with tip and all standard hoses.
UHMWPE packings ...................... 98-3072*
TeflonTM packings ........................ 98-3073*
Shipping weight 35.5 lbs. (16.1 kg)
Cart mounted outfit - no gun or hoses
UHMWPE packings ....................... 812280
Teflon TM packings ......................... 812281
Raptor - Pump only
TeflonTM packings ......................... 812451
Shipping Weight ............... 12.6 lbs (5.7 kg)
Available Accessories
*3/16 Fluid Hose .............................. 71-4995
1900 PSI (28 bar), 25’, 1/4” NPS
•25’ Pneunatic Tubing Assembly ..... 71-4991
*Ground Wire Kit ............................... 873067
*100 mesh gun filter; ....................... 54-4725
*(Accessories included with outfits above)
Fluid Regulator 300-2000 PSI ............ 84-420
(4.4 - 30 bar)
Pump Outlet Fluid Filter .................. 103-1241
Air Motor Repair Kit .......................... 861030
Lower Pump Repair Kit
UHMWPE ........................................ 861110
TeflonTM ......................................................................... 861111
Siphon Kit - 55 Gallon ....................... 874580
Siphon Kit - 5 Gallon ......................... 874509
Wet-Sol Plus 1 qt. Packing Lubricant 863009
Available Service Literature
System Assembly Sheet ................. 77-5199
Package Part Sheet ........................... 81228X
Pump Part Sheet ................................ 81245X
Air Motor Part Sheet ......................... 842009
Fluid Section Part Sheet ..................... 87111X
* Included with outfits
61
Vecter Spray Finishing Outfit 28:1
Air Assisted Airless Outfits - 2800 PSI
Infinity Pump on Cart & Infinity Pump with Wall Bracket
Outfit Features
Outfit Benefits
Part Numbers
5-year pump warranty on all nonwear parts
Stainless steel gun and pump
Hydraulically-assisted fluid
delivery combined with HVLP air
supply
Achieves fine finish and high
efficiency
Lightweight and easy to handle;
gives operators superior control
while fighting fatigue
Works with lacquers, enamels,
stains, sealers, and top coats
Can spray light to heavy
viscosity materials
Can spray air-assist or airless
For wood and metal finishing
Infinity Pump on Cart ......................... 812180
Infinity Pump wit Wall Bracket .......... 812190
Air Motor Repair Kit .......................... 861030
Lower Pump Repair Kit ..................... 861040
Fluid Regulator 300-2000 PSI ............ 84-420
Fluid Regulator 100-900 PSI .............. 84-520
Pump Outlet Fluid Filter .................. 103-1241
Fluid Tip .009 .................................. 110-0908
(Included in Package) .011 ......... 110-1108
.013 ............................................ 110-1308
.015 ............................................ 110-1508
.018 ............................................ 110-1808
Air Cap ................................................. 93 HA
1/8” ErgoFlex Fluid Hose
5000 PSI, 25’, 1/4” N.P.S. ............. 71-6840
3/16” ErgoFlex Fluid Hose
4000 PSI, 25’, 1/4” N.P.S. ............. 71-6842
Double Male Nipple, S.S. ................... 72-791
1/8” Pneumatic Tubing Assembly
125 PSI, 25’, 1/4” N.P.T. ............... 71-6860
Ground Wire ..................................... 873067
Maximum fluid pressure - 2800
PSI
Pump supplies .38 GPM @ 60
CPM to supply tip sizes .009” to
.017”
Drop forged aluminum gun body,
stainless steel fluid passages,
nozzle and needle
Part Number 98-3040
Cart-mounted outfit (optional hoses shown
above) is a complete finishing package for
mobile flexibility. This outfit included pump,
air controls, cart, gun filter, spray gun with
tip and all standard hoses. Shipping weight
45 lbs.
62
Part Number 98-3042
Wall-mounted outfit (optional hoses shown
above) is a complete finishing package for
stationary applications. The small profile fits
easily in tight spaces.
Infinity “Pogo” Pump
Pump #812300 (SS Drum), #812302 (CS Drum)
#812304 (SS Stub) - Ratio 2:1 - 200 PSI
Performance
Air Inlet Pressure .... .30-150 PSI (2-10.2 bar)
Fluid Pressure Range ...... 60-300 PSI (4-20.4
bar)
Max. Cycles/Min. ..................................... 120
Displacement Per Cycle
7.2 cu. in. ................................. (117.9 cm3)
3.9 oz. ......................................... (117.9 ml)
.03 gal ........................................ (.117 liter)
Cycles per Gallon (Liter) ................... 32 (8.4)
Flow @ 120 Cycles/Min. . 4.2 GPM (15.8 lpm)
Lower Pump Material ................ Carbon Steel
Plunger Material .............................................
............... Carbon Steel (Chrome Plated)
Cylinder Material ....................... Carbon Steel
Packing Set ..................... UHMW Plyethylene
Max 120 o F Fluid Inlet Temp.
Max 180o F Fluid Inlet Temp. Optional
Packing
Weight ................................. 12 lbs. (5.4 kgs.)
Materials of Construction
812300 and 812304
Part Number for 812302
(Carbon Steel)
Noise level @ 60 PSI .................... 77.8 db(A)
Lower Pump Material ............. 316 Stnls. Steel
Plunger Material ..................... 316 Stnls. Steel
Cylinder Material .................... Stainless Steel
Packing Set ................... UHMW Polyethylene
Max. 120o F Fluid Inlet Temp. (Standard)
Max. 180o F Fluid Inlet Temp. (Optional)
Weight Drum ....................... 19 lbs. (8.6 kgs.)
Stub .................................... 16 lbs. (7.2 kgs.)
Air Motor ...........................................
Air Motor Repair Kit ..........................
Lower Pump Assembly ....................
Lower Pump Repair Kit .....................
Optional Telfon Packing ....................
Air Motor ...........................................
Air Motor Repair Kit ..........................
Lower Pump Assembly (812300) ....
SS Stub (812304) .........................
Lower Pump Repair Kit (same) ........
873008
861034
873010
861035
861036
Available Accessories
Air Control ...................................... 41-15931
Muffler .............................................. 873191
Wall Mount or Open Drum Mount Bracket
.................................................. 873184
Part Numbers for
812300 and 812304 (SS)
Materials of Construction
812302
873008
861034
873009
873200
861089
Pogo Spray Finishing
Outfit Model #98-3060
General Description
Excellent for solvent based adhesives
This (55) Gallon Bung System is complete
with 2001 SS Gun w/66SS x 66SD-3 set up,
1:1 ratio supply pump with air control and 25
ft. fluid and air hose assemblies
63
Infinity Two-Ball Pump Packages
Wall Mount Package Includes
Accessories (Included)
Wall Mount Bracket
for 4-1/4” and 6” motors ............... 873115
for 8” motors ................................ 873237
Mufflers
for 4-1/4” and 6” air motors ......... 873158
for 8” air motors ........................... 873190
Air Filter/Regulator (2) ...................... 849303
SS Fluid Filter w/100 mesh element . 841006
Pump with UltraCoatTM
Wall Mount Bracket
Muffler
Air Filter/Regulator
Stainless Steel Material Filter
Manual Fluid Pressure Relief
Valve
Needle Valve
Available Accessories*
Siphon Kits
5 gallon ......................................... 874500
55 gallon ....................................... 874501
Siphon kits include 5’ hose, SS fittings, tube
and strainer
*not included with packages
Model - 1100 PSI
Model - 4000 PSI
1-4, 11:1 Ratio, 3.77 GPM ............... 812115
1-8, 40:1 Ratio, 3.77 GPM .............. 812265
Typical Applications
11:1- used in air assist airless and lowerrange airless systems with light to medium
viscosity coatings. This pump can be used
as a multi-gun supply pump in a circulating or
a dead end system. Bare pump #812315
40:1 - used in high-pressure systems with
light, medium or high viscosity coatings.
Typically an airless pump, can also supply
air assisted airless. This pump can also be
used in multi-gun circulating or a dead end
system. Bare pump #812415
Model - 2200 PSI
1-4, 22:1 Ratio, 1.9 GPM ................ 812125
22:1 - used in air assist airless and midrange airless systems with light to medium
viscosity coatings. This pump can also be
used in a circulating system or a dead end
Model - 2300 PSI
Model - 4500 PSI
1-6, 45:1 Ratio, 1.9 GPM ................ 812155
45:1 - used in high-pressure systems with
light, medium or high viscosity coatings.
Typically an airless pump, can also supply
air assisted airless. This pump can also be
used in a circulating system or a dead end
1-6, 23:1 Ratio, 3.77 GPM .............. 812135
23:1 - used in air assist airless and midrange airless systems with light to medium
viscosity coatings. This pump can be used
as a multi-gun supply pump in a circulating or
a dead end system. Bare pump #812335
Model - 3000 PSI
1-4, 30:1 Ratio, 1.5 GPM ................ 812145
30:1 - used in air assist airless and mid-high
range airless systems with light, medium and
high viscosity coatings. This pump can also
be used in a circulating system or a dead
end system. Bare pump #812345
64
Finishing Systems/Packages
HVLP Conversion Outfits
Conventional Air Spray Outfits
Model 98-1261 - PD Pro Finish
Outfit Consists Of . . .
94-90 P
Mach 1 Gun
135-1058
2 h.p. Oiless Air Compressor
83Z-220
2.8 Gallon ASME PT Tank
71-1203
15’ Air Hose Assembly
(Compressor to Tank)
71-1205
(Tank to Gun)
71-3383
25’ Fluid Hose Assembly
(Tank to Gun)
Model 98-1067
Binks Steadi-Grip outfit. External mix
nozzles for enamels, primers, polyurethane. Includes standard 2001 gun with
63BSS-63PB, 5 ft. of air and fluid hose,
air regulator valve and 80-228 pressure
cup. Optional nozzles are available.
Model 98-1121
A one-quart starter outfit without
compressor. For touch-ups and
small to medium jobs by contractors,
cabinet makers, and wood finishers
who have existing compressors (1.5
H.P. Minimum Req’d)
• 98-1120 Mach 1 Conversion 1
Quart HVLP Outfit
with 94 x 90P nozzle
• 71-1205 25’ 5/16” Air Hose Assembly
• 73-134 Air Regulator w/Gauge
Model 98-1127
Same as 98-1121 except with M1-G Gravity Spray Gun with
stand
Vecter Spray Finishing Outfit
812180 Infinity Pump on Cart
812190 Infinity Pump with Wall Bracket
861030 Air Motor Repair Kit
861040 Lower Pump Repair Kit
10-411 .011 Fluid Tip (included in pkg.)
HVLP Touch Up Outfits
Model 98-1120
Outfit Consists of . . .
94-90P
Mach 1 Gun
80-272
1 Quart Pressure
Assisted Stainless Steel Cup
Model 98-1121
Outfit Consists of . . .
98-1120
Mach 1 Gun
71-1205
(hose not shown)
73-134
Air Regulator with Gauge
98-3072 Raptor Spray Finishing System
Wall mounted unit complete with gun and
hoses
98-3070 UHMWPE packings
98-3071 Teflon packings
Cart mounted unit complete with gun and
hoses
98-3073 Teflon packings
Wall mounted unit - no gun or hoses
812290 UHMWPE packings
812291 Teflon packings
Cart mounted unit - no gun or hoses
812280 UHMWPE packings
Raptor - Pump Only
12.6 lbs. Shipping Weight
65
Drum Covers and Agitators
Drum Covers
5 Gallon Pail Cover
Part No.
41-2182*
41-2414**
41-3205
31-124
55 Gallon Drum Cover
Container
5
55
5
55
Description
Shipping Wt. Lbs.
Carbon Steel Pail Cover for Comet 3C & 4B
5
Carbon Steel Drum Cover for Comet 3C & 4B, Hi-Vol
23
Carbon Steel Pail Cover for 5 Gal. Agitator
& Siphon Tube Only
6
Carbon Steel Drum Cover for 55 Gal. Agitator
& Siphon Tube Only
24
* with mounting holes for: Pump, Air Control, Agitator and Filter
** For use with Hi-Vol. 41-11499 adapter required.
Gear Reduced Drive
Agitator w/Cover
Part 31-131
41-9000
Elevator
Part #41-9000
For lifting 55 gallon
cover-mounted pump units.
w/Cover
Part 31-133
Shipping Wt. .......................... 68 lbs.
w/Cover
Part 31-129
Part Sheet Ref. .......................... 1392
Gear Reduced Drive Agitator
Direct Drive Agitator (only) . 41-3304
Direct Drive Agitator (only) . 41-3312
Agitator (only) ...................... 41-3311
w/Cover .................................. 31-129
w/Cover .................................. 31-133
Agitator w/Cover .................... 31-131
Includes: 31-124 Cover & 41-3311
Includes: 31-124 Cover & 41-3304
Agitator
Includes: 41-3205 Cover & 41-3312
Agitator
Agitator
Container Size .................... 55 Gallon
Container Size .................... 55 Gallon
Motor Specifications
Container Size ...................... 5 Gallon
Air Motor Model ....................... Gear
Air Motor Model .................... Direct
H.P.
....................................... 1/4
Air Motor Model .................... Direct
H.P.
....................................... 1/4
Gear Ratio .................. 20:1 Reduction
H.P
....................................... 1/4
CFM
....................................... 4-8
Shaft Specifications
CFM
....................................... 4-8
CFM
....................................... 4-8
Material ..................... Stainless Steel
Mount ................................. Flange
Mount ................................. Flange
Mount ................................. Flange
Diameter in. (mm) ...... 5/8” (190.5 mm)
Max. Speed ....................... 1000 RPM
Diameter in. (mm) ......3/8” (114.3 mm)
Max. Speed ....................... 1000 RPM
Diameter in. (mm) ......7/8” (266.7 mm)
Speed Range ................... 15-90 RPM
Propeller Specifications
Number of Propellers ...................... 2
Diameter (in.) ............................ 5 1/8”
Diameter (in.) ................................... 3
Diameter (in.) .......................... 14 1/2”
Cover Material .............. Carbon Steel
Part Sheet Ref. ............................ 1390
Cover Material ............. Carbon Steel
Part Sheet Ref. ............................ 1474
Cover Material ............. Carbon Steel
Part Sheet Ref. ............................ 1657
66
Fluid Regulators
Downstream Medium Flow
Model
Number
Body/
Ball & Seat
(see code at bottom)
Regulated
Pressure Range
PSI (bar)
Working
Pressure with Gauge
PSI (bar)
1/4” ports, medium pressure to 1 GPM (3.785 liters)
84-420
S/S, T/C
300-2000
84-520
S/S, T/C
100-900
3000
1000
3/8” ports, medium pressure to 3 GPM (11.4 liters)
845010
S/S, T/C
400-1250 (27.2-83)
845011
S/S, T/C 1000-3000 (59-207)
Maximum
Inlet Pressure
PSI (bar)
3000
3500
3000 (204)
6000 (408)
Downstream High Flow
Model
Number
Body/
Ball & Seat
Regulated
Pressure Range
PSI (bar)
Working
Pressure with Gauge
PSI (bar)
Maximum
Inlet Pressure
PSI (bar)
1000 (69)
1250 (85)
6000
3/8” ports, high pressure to 6 GPM (22.7 liters)
845001
S/S, T/C
100-800 (7-55)
845013
S/S, T/C
2000-5000
Back Pressure Models
Model
Number
Base
Regulated
Housing Seat Pressure Range
PSI (bar)
Working
Pressure with Gauge
PSI (bar)
Maximum
Inlet Pressure
PSI (bar)
3000
1000
3500
3500
200 (14)
800 (55)
200 (14)
800 (55)
3000
1/4” ports, medium pressure regulator
84-421
T/C
300-2000
84-521
T/C
100-900
3/8” ports, high-flow to 6 GPM (22.7 liters)
845000
S/S, T/C
0-200 (0-14)
845002
S/S, T/C
0-800 (0-14)
845012
S/S, T/C
1000-3000
1/2” port, low shear to 1 GPM (3.78 liters)
84-601
S/S, S/S
0-200 (0-14)
3/4” ports, high-flow to 11 GPM (41.6 liters)
84-404
S/S, S/S
10-140
Low Pressure
845001
(with gauge)
200(14)
200(14)
150
150
200(14)
200(14)
High Pressure
845010
845011
(without gauge)
84-420
84-421
84-520
84-521
Optional Gauges
873055
Rear Mount (3000 PSI)
101-3069 (3000 PSI)
84-491 (1000 PSI)
84-246 (200 PSI)
845000
845002
(with Gauge)
Optional Gauge: 84-246 - 0 - 200 PSI Ga
1 1/4” ports, system-flow** to 18.5 GPM (701 liters)
845003
S/S, T/C
0-200 (0-14)
Material codes
T/C
Tungsten Carbide
S/S
84-404
(without Gauge)
Stainless Steel
**Flow rates tested in 55 CPS Material
67
HVLP Conversion Accessories
HVLP Conversion Outfits (converts from HVLP to conventional airspray to electrostatic . . .
all with simple optional accessories)
Mix or match the following components
to provide all the equipment contractors
need. For maximum performance, please
consult your Distributor or Binks
Finishing Specialist when replacing or
designing any HLVP outfit.
Model 135-1058
2 h.p. compressor
Model 80-272
1 quart SS cup assembly
Model 73-134
Regulator
Zinc-Coated 2.8 Gallon
ASME PT Tanks
Model 83Z-220
Durable, economic
tanks that can handle
up to 80 PSIG. Made of
heavy-gauge steel,
coated on the inside
and outside with zinc
plating and chromate
dip. Thiokol gaskets.
Pressure Tank: Model 83Z-220
Agitator Drive: None
Air Control: Model 83-2417
Regulators: Quantity 2
Shipping Wt. (lbs): 30
Part Sheet: 1458
Pressure Tank Liners
Save clean-up time and
solvent costs with
these disposable
polyethylene liners.
Use liners with all
systems.
Carton of 80 Liners for 2.8 Gallons
ASME PT Tanks
Model 80-350
Ideal for small batch
production spraying
(2 qt. capacity)
Model 80-356
SG2 Cup Liners
Includes 12
plastic liners for
easy clean-up.
Air Nozzle Test Gauge
Part Number Description
54-3622
92HA & 93HA Nozzle
(Mach 3SL)
54-3908
900 Series
54-3935
95 & 97 Series
54-4066
80 Liners
54-4078
95AS & 97AS Nozzles
(Siphon)
54-4150
2S, 2P Cub Gun
54-4356
93P Nozzle
CALL
MAIL
Toll-Free
your order
800-365-7565 12834 Gravois Rd.
to order
St. Louis, MO 63127
68
FAX
your order
314-729-7099
E-MAIL
your order
[email protected]
WEBSITE
Visit our site
www.fluidair.com
and link to
www.gsa.gov
Spray Gun Accessories
Air Controller
Part Number: 72-1823
(stainless)
Use for Spray Gun Models
95 and 2001 in circulating
and heated fluid systems.
3/8”NPS (m) connection.
Shipping weight 14 oz.
Part Number 73-125
For air inlet at-the-gun mounting to give
convenient, immediate pressure reading
and correction. Anodized aluminum
body is fitted with:
• 1/4” NPS (f) swivel connection for
360o variable position
• 1/4” NPS (m) thread
• Pressure adjusting knob and pressure
gauge.
Part Sheet: 2142
Fluid Circulating Connections
Fluid Strainer Assemblies
In-line cartridge filter.
Part Number 54-988 (100 mesh)
Part Number 54-982 (150 mesh)
Shipping Weight 1 lb.
Spray Gun Extensions
In-Line Cartridge Filter
In-line Cartridge Filter*
Air Metering
Valve Assemblies
Part Number: 73-159
Type: 90o
Thread: 1/4” NPS (f)
1/4” NPS (m)
For Mach 1 and Mach 1A spray guns
only.
Part Number 54-4090-90o angle head,
Part Sheet 2635
Part Number 54-4091 45o angle head,
Part Sheet 2635
Cartridge Replacement
Filter
Assembly
54-990
54-987
54-981
54-980
Mesh
Screen
100
150
Shipping Weight
14 oz.
4 oz.
* Also adaptable to fluid lines from
spray guns
Fluid Inlet Tube Extension
(less fluid stainer)
Part Number: 54-957
Brings air and fluid hoses together at
the base of the spray gun. Use for
Spray Gun Models 95, 95SL and 2001.
3/8” NPS (m) connection.
Shipping weight 8 oz.
For hard to reach location. Attach to
Spray Gun Models 95 and 2001. For
conventional coatings.
Air inlet 1/4” NPS (m)
Fluid inlet 3/8” NPS (m)
Length
in Feet
4
6
Part
No.
54-296
54-297
Shipping
Wt.
(lbs.)
4
5 1/4
Act
Wt.
(lbs.)
3
4
Gunner’s Mate
(spray gun lubricant)
Part Number: 6-429
One case of (20) two-ounce Gunner’s
Mate bottles.
Part Number: 6-428
Two ounce bottle of Gunner’s Mate.
69
Spray Gun Accessories
45 & 90 Deg.
Angle Heads
Extensions
For MACH 1 and MACH 1A spray guns only.
Part Number 54-4090-90 degree angle head
Part Sheet: 2635
Part Number 54-4091 - 45 degree angle head
Part Sheet: 2635
52-3706 6”
52-3718 18”
52-3712 12”
52-3724 24”
Note: Extensions may be joined together for added length.
Specify new needle length. Extensions are sold less air cap
and fluid nozzles. Specify spray gun model that will be used
with the extension.
Siphon Hoses and Ball Valves
Part Number
Description
Tube
Siphon
874500
874501
874504
1” siphon hose w/16” wand (3/4)
1” siphon hose w/36” wand (3/4)
1/2” siphon hose w/16” wand
Nylon
Nylon
Nylon
Construction
Fittings
W/PSI
5 Gallon
SS
SS
SS
55 Gallon
X
X
X
CALL
MAIL
Toll-Free
your order
800-365-7565 12834 Gravois Rd.
to order
St. Louis, MO 63127
70
FA X
your order
314-729-7099
E-MAIL
your order
[email protected]
WEBSITE
Visit our site
www.fluidair.com
and link to
www.gsa.gov
HVLP Accessories
NEW-SG-2 Plus Steadi-Grip
Rotary 2 qt. Pressure Cup (80651)
The “prop style agitator provides
constant agitation without the use of a
magnet. This ensures that paints are
mixed thoroughly and are not subject to
particle separation. The newly redesigned 80-651 operates at 0-40 psig.
Part Sheet: 77-2842
The Binks 80-651 SG-2 cup should be
used with a Binks 80-356 plastic liner
for halogenated solvents.
SG-2 Plus Steady-Grip Agitator
2 qt. Pressure Cup (80-601)
The Binks SG-2 Agitator Cup (80-601)
includes a reciprocating air-driven
magnetic agitator assembly and is ideal
for non-metallic coatings that require
constant agitation.
Part Sheet: 77-2841
The Binks 80-601 SG-2 cup should
NEVER be used with halogenated
solvents.
Gun Cup Strainer, 50-Mesh
“Strain-It” Strainers
A final strainer for air atomized spray
gun cups. The 50-mesh brass filter
screen can be used with all enamels and
lacquers. The strainer is easily pressed
on and removed from the end of the
siphon tube. Its resilient, expandable
gasket prevents by-pass and holds
firmly on all siphons having tube sizes
up to 7/16 inches. Box of 12
P/N 81-82 (white cone) .. 145 mesh/inch
P/N 81-83 (blue cone) .... 100 mesh/inch
P/N 81-84 (red cone) ...... 80 mesh/inch
Fits all spray gun cups. Stainless steel
screen lasts and lasts. A choice of three
mesh sizes: Super Fine (145) removes
lint and particles...even from thinner;
Fine (100) for primers and more viscous
materials; Medium (80) for heavy
materials. Packaged 5 per carton.
80-300 Cup
85-435 Regulator
P/N 80-300 (not shown)
Stainless Steel Cup consists of a 1 qt.
clamp-type cup with vent valve, 85-435
regulator, and connector tube. Part
Sheet 77-2775
P/N 85-435 (not shown)
Air Regulator controls air pressure in
the 80511 one quart pressure cup and
provides accurate control of fluid
pressure for otpimum spray pattern
control. Prevents over-pressurizing the
cup and is adaptable to all MACH 1
spray guns.
Inlet: .............................. 1/4” NPS (m)
Outlet: ........................... 1/4” NPS (f)
Part Sheet: 77-2816
SG-2 Plus Steadi-Grip NonAgitated 2 qt. Pressure Cup
(80-600)
The Binks SG-2 Steadi-Grip pressure cup
(80-600) is ideal for component spraying
and industrial applications where small
batch production spraying is required.
Since the SG-2 cup is pressurized, the
spray gun can be held at any angle
without spitting or sputtering.
Part Sheet: 77-2841
The Binks 80-600 SG-2 cup should be
used with a Binks 80-356 plastic liner
for halogenated solvents.
SG2 Cup Liners
P/N 80-356 includes 12 plastic liners for
easy clean-up
81-800 No-Drip Cup
81-810 No-Drip Cup
(Teflon coated interior) for siphon guns
71
HVLP Accessories (cont’)
Extensions
Air Nozzle Test Gauge
Check Valves
For Mach 1, Mach 1 SL and Mach 1A
Spray Guns*
52-3706 ......................................... 6”
52-3712 ......................................... 12”
52-3718 ......................................... 18”
52-3724 ......................................... 24”
NOTE: Extensions may be joined
together for added length. Specify new
needle length. Extensions are sold less
air cap and fluid nozzles. Specify spray
gun model that will be used with the
extension. Part Sheet: 77-2557
54-3902 .................. 91P & 92P Nozzles
54-3908 ............................... 900 Series
54-3935 ......................... 95 & 97 Series
54-4078 ......... 95AS&97ASNozzles(Siphon)
54-4150 ........................... 2S Cub Guns
54-4356 .............................. 90P Nozzle
54-4356 .............................. 93P Nozzle
54-4066 .............................. 94P Nozzle
54-4322 ......... 3 pack. Used with 98-1130 Short
54-4321 ............. 3-pack (98-1411 Long
85-271 .... Check Valve-Plug-Fitting Kit
*Other lengths and styles are available. Gun extensions are special order
and are not subject to return.
Fluid Inlet
Part Number: 54-4330
Adjustable fluid inlet allows finger-tip
control of coatings without fluid needle
interference. Fits both hand and
automatic guns
72
Needle Packing Kits
54-4261 .......... Self-Adjusting Packing
54-4262
Self-Adjusting Packing w/
Needle
54-4370 ................... Cartridge Packing
45 & 89 Deg. Angle Heads
Repair Kits
For MACH1 and MACH 1A spray guns
only.
54-4090 ......................... 90o angle head
Part Sheet: 77-2635
54-4091 ........................ 45o angle head
Part Sheet: 77-2635
AA-1500 ................................. 54-4970
AA-4000 ................................. 54-4993
MACH 1 ................................. 54-3605
MACH 1A & 1AR .................. 54-3980
MACH 1SL ............................ 54-4278
MACH 3SL ............................ 54-3645
MACH 2A .............................. 54-4405
M1-G Gravity ......................... 54-4367
Cub SLG ................................. 54-4478
Cub SL ................................... 54-4479
MACH 1 Cub (overhead trigger)
............................................... 54-4139
Ratchetback (Auto Gun)
Part Number: 54-3582 (not shown)
Specially designed for applications
where visual indication of fluid needle
location is issential. Adjustments
numbered 1-9 on the back of hte spray
gun conveniently indicate exact needle
position. Part Sheet: 77-2672
Accessories for Air Control Equipment
Model 72-81611
Low
Medium &
High
Part No.
Size
Pressure (PSI)
72-81611
72-81712
72-21611
72-21712
72-11611
72-11712
172-31611*
172-31712*
72-50202
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/4”
250
250
500
500
4000
4000
4000
4000
1000
*Stainless Steel
Model 172-31611
Model 72-21712
Medium &
High
Thread
1/4” NPS (m)
3/8” NPS (m)
1/4” NPS (m)
3/8” NPS (m)
1/4” NPS (m)
3/8” NPS (m)
1/4” NPS (m)
3/8” NPS (m)
3/4” NPT (f)
1/4” NPT (m)
3/8” NPT (m)
1/4” NPT (m)
3/8” NPT (m)
1/4” NPT (m)
3/8” NPT (m)
1/4” NPT (m)
3/8” NPT (m)
3/4” NPT (f)
Ball Valve Replacement seal 83-2600-5 (pack of 5)
Binks Automatic Drains
Fits all Binks oil and
water extractors,
coalescers, and dryers.
Merely remove the
drain screw and replace
it with the Binks
automatic drain and
furnished nipple. Oil,
water, sludge and other
contaminants draining
from the compressed
Model 37-1553 air line will be trapped
in the bowl. The accumulation of liquid
in the bowl causes the drain float to
rise. This action admits bowl air
pressure into a piston chamber which,
in turn, opens a bleed valve and allows
the liquid in the bowl to be expelled
under pressure. When the liquid level
drops sufficiently, the float closes and
draining stops. The adaptive nipple
with fit 1/8” NPT pipe or 3/8” - 27
machine threads. This makes field
conversions simple.
Part Sheet 2453
For Repair Kit, order Part No. 37-1552
For 3’ Drain Hose, order Part No. 72-692
DM Nipple and 71-7306 Drain Hose
Model 85-200
Capacity: 40 CFM,0-150 PSIG
1.13 M3/Min, 0-10.34 BAR
Inlet: 3/8” NPT (f)
Three regulated outlets:
1/4” NPT (f)
Part Sheet 1787
Weight: 2-1/2 lbs., 1.13 kg.
Model 85-201
1.13 M3/Min, 0-10.34 BAR
Two main line pressure outlets:
1/4” NPT (f)
Two regulated outlets:
1/4” NPT (f) & 3/8” NPT (f)
Part Sheet 1787
Weight: 2-1/2 lbs., 1.13 kg.
Model 85-225
2.83 M3/Min, 0-10.34 BAR
Three regulated outlets:
one 1/2” NPT (f)
two 1/4” NPT (f)
Part Sheet 1787
Weight: 3-1/2 lbs., 1.59 kg.
Binks Pressure Gauges
Easy to read dials for
positive, accurate and
continuous measure of
air pressure. Quick,
simple installation. Air
models have fit 1/4”
Model 83-1290
NPT (m) inlet connection. Nine models are available (two
with back inlets). Shipping weight 1 lb.
each.
Model
Number
83-1636
83-1414
83-386
83-1355
83-2727
83-1290
83-2218**
83-387
Range
(PSI)
0-15
0-30
0-60
0-100
0-100
0-150
0-160
0-200
Range
(BAR)
1-1.03
0-2.07
0-4.14
0-6.89
0-6.89
0-10.34
0-11.03
0-13.79
** With Back Inlet
73
Cartridge Respirators
Superior Protection against Organic Vapors, Fumes, Dusts and Mists
Millennium 3000 - Premium Paint Spray Respirator
Breathe easier with the Binks Millennium 3000 - a premium charcoal filter respirator.
Ready-to-use right out of the box, the Millennium 3000 combines superior comfort
with the fit, durability and protection of a conventional half-mask respirator. Designed with finishing professionals in mind, the Millennium 3000 features:
•
•
•
•
Heavy duty silicone and metal face-piece for increased durability and comfort
Adjustable, heavy duty straps and head band
Maximum serviceability - fully serviceable with a Binks Tune-Up Kit
Extended life - withstands repeated cleanings and exposure to paints and solvents
without deterioration.
Millennium 2000 - Classic Paint Spray Respirator
For economical protection against organic vapors, fumes, dusts, and mists, try the
Binks Millennium 2000 - a value-priced charcoal respirator. Ready-to-use right out of
the box, the Millennium 2000 provides the fit and comfort of a traditional respirator
and protection from paints and solvents. An oil-resistant pre-filter (Part #40-1935) is
also available. The value-priced Millennium 2000 is a good choice when convenience
and value are important considerations.
Both the Binks Millennium 3000 and Millennium 2000 Respirators meet 42 CFR Part 84
Standards.
Binks Tech Tip . . . When should cartridges and filters be replaced?
The service life of cartridges and filter depends on several factors including breathing
rate/volume, concentration of contaminants, temperature and humidity.
• Replace chemical cartridges when you detect odor or taste of vapors, or when you
experience eye, nose or throat irritation.
• Replace pre-filters or filters when you experience increased resistance to breathing.
WARNING!
Binks Millennium paint spray respirators are not to be used with urethane paints or
other paints containing di-isocyanates. Di-isocyanates have a low odor threshold and
are not easily detectable by smell. A dangerous level of di-isocyanates can break
through a charcoal filter cartridge before the user is able to smell it. Painters using
such paints must use an air-supplied respirator.
74
Understanding Pressure Drop
Pressure Drop Basics
The amount of air that a toll consumes
all remain constant for a given set of
conditions. Pressure will always drop
when the tool is turned on and when the
air begins to flow through the hose. In
addition, pressure drop will vary in
relation to any adjustment made on the
tool.
Pressure Drop Chart
Flow of free air in cubic feet per minute
Understanding pressure drop requires a
basic knowledge of CFM (cubic feet per
minute) and psi (pounds per square
inch). CFM refers to the given volume
of air that flows past a given point in
one minute. PSI is the amount of force
pushing the cubic foot of air through
the hose or tool.
The same pressure loss principles apply
when moving fluid through a hose. Be
sure to consider pressure loss when
choosing fluid hose and fittings.
Pressure Drop Points
Pressure drop in ounds per sq. in., per 100 ft. of hose
Losses in pressure (psi) are dependent
on the variables of hose length, hose
diameter, volume (cfm), and the number
and design of quick disconnects. To
minimize the effects of pressure drop
and the resulting lack of volume,
consider the following.
• Frictional resistance between the fluid
and the walls of the hose.
• Internal resistance (shear) - fluid
moves faster through the center of the
hose and slower against the walls.
• Change in direction of air or fluid
through the system.
• Volume at any given time as determined by back pressure.
• The number of system connection,
adapters, nipples, valves, filters and
air and fluid controls.
• Hose I.D. - use the minimum I.D.
necessary for each application
• Hose length - pressure drop is
proportional to hose length
• Surface of the hose’s inner tube - a
rough surface can increase pressure
drop up to 50%.
To determine pressure drops fo hose lengths other than 100’
(Pressure Dropper Chart Figure) x (Ft. of Hose) = Pressure drop for hose used
100
Technical Data
This chart is for approximating and
should only serve as a guide in sizing air
hose. Pressure drops are directly
proportional to hose lenghts. That
means that if hose length doubles, for
example, pressure drop doubles.
Example:
• 100’ x 1/2” I.D. hose at 40 cfm has a
pressure loss of 17 1/2 psi.
• 200’ x 1/2” I.D. will lose 35 psi
• 50’ x 1/2” I.D. will lose between 8 to 9
psi.
75
Premium Spray Finishing Air Hose
Smooth Cover
Recommended Use
Premium spray finishing air hose.
Class B oil resistance. Designed
for all finishing operations as well
as rugged industrial applications,
especially applications requiring
lubricants in the airline supply or
where oil and grease are present in
the environment. Excellent for use
with water and water-based
materials. Temperature range from
-40oF to +200oF(max).
Tube
EPDM Class B oil resistance.
Bulk Hose Chart - Smooth Cover
Reinforcement
High tensile strength spiral
reinforcement. Specially designed
for maximum flexibility (under
pressure) and maximum coupling
retention.
Cover
EPDM, red, smooth, abrasion
resistant. Oil resistance.
SIZES AVAILABLE BULK HOSE
I.D.
O.D
NUMBER
1/4”
1/2”
5/16” 5/8”
3/8” 11/16”
1/2”
7/8”
3/4” 1 1/8”
Connections
SIZES AVAILALBE
I.D.
1/4”, 5/16”, 3/8”, 1/2” and 3/4”
Smooth Cover.
Air Hose
Current
Part No.
Cancelled Part
No.
1/4” ID
71-10000
71-130, 71-135
H-1957, H-1900
5/16” ID
71-11000
71-131, 71-136
H-1921, H1901
3/8” ID
71-12000
71-132, 71-137
H-1958
1/2” ID
71-13000
71-133, H-1961
3/4” ID
71-14000
71-134
76
250
250
250
250
250
BEND
RADIUS
STD. REEL
LENGTH IN FT.
PLUS OR MINUS
50 FT.
SHIPPING WGT.
BASED ON AVG.
FEET PER REEL
HOSE WEIGHT
PER 100 FEET
2 3/4”
3”
3 1/2”
4”
6”
500
500
500
300
300
50 lbs
87 lbs.
96 lbs.
86 lbs.
112 lbs.
10 lbs.
16.2 lbs.
18 lbs.
26.8 lbs.
35 lbs.
Hose Assemblies and Connections
Three-piece, plated brass,
reusable.
I.D. Sizes
71-10000
71-11000
71-12000
71-13000
71-14000
MAXIMUM
WORKING
PRESSURE (PSI)
1/4”
1/4”
1/4”
5/16”
5/16”
5/16”
5/16”
3/8”
3/8”
LENGTH OF
HOSE
HOSE
ASSEMBLY
PART NO.
BULK HOSE
NUMBER
CONNECTION
THREAD SIZE
TYPE OF
CONNECTION
CONNECTION
PART NUMBER
5 ft.
25 ft.
50 ft.
5 ft.
15 ft.
25 ft.
50 ft.
25 ft.
50 ft.
71-1101
71-1105
71-1106
71-1201
71-1203
71-1205
71-1206
71-1355
71-1356
71-10000
71-10000
71-10000
71-11000
71-11000
71-11000
71-11000
71-12000
71-12000
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
72-1303
72-1303
72-1303
72-1317
72-1317
72-1317
72-1317
72-1325
72-1325
FluidallTM Fluid Hose
Nylon Lined, Maximum Versatility
Recommended Use
Premium, versatile fluid hose, for
finishing operations plus a wide range
of fluid applications. FluidallTM is ideal
for resins and solvents contained in
latices, spoxies, urethanes, alkyds,
primers, acrylics, polyesters, silicones,
bitumastic coatings, oil and water based
paints, lacquers, alcohol and latex
coatings. Temperature range from 0oF to
+190oF (max).
Tube
Nylon.
Reinforcement
High tensile synthetic braid. Specially
designed for maximum flexibility (under
pressure) and maximum coupling
retention.
Cover
Black, synthetic, smooth rubber. Class
B - Oil Resistance.
SIZES AVAILABLE BULK HOSE
I.D.
O.D
NUMBER
1/4”
1/2”
3/8” 11/16”
1/2”
7/8”
3/4” 1 3/16”
1”
11/2”
71-280
71-282
71-283
71-284
71-285
MAXIMUM
WORKING
PRESSURE (PSI)
BEND
RADIUS
STD. REEL
LENGTH IN FT.
PLUS OR MINUS
50 FT.
SHIPPING WGT.
BASED ON AVG.
FEET PER REEL
HOSE WEIGHT
PER 100 FEET
500
500
750
750
750
3”
3 1/2”
5”
8”
12”
500
500
300
300
300
43 lbs
83 lbs.
74 lbs.
118 lbs.
168 lbs.
8 lbs.
15 lbs.
22 lbs.
36 lbs.
53 lbs.
Connections
Three-piece, plated brass, reusable.
I.D. Sizes
1/4”, 3/8”, 1/2”, 3/4” and 1”
Air Hose
Current
Part No.
Cancelled Part
No.
1/4” ID
71-280
H-1975-1
5/16” ID
3/8” ID
NONE
71-282
H-1976-1
H-1973-1
1/2” ID
71-283
H-1974-1
3/4” ID
71-284
NONE
1” ID
71-285
NONE
SIZES
I.D.
AVAILABLE
LENGTH OF
HOSE
HOSE
ASSEMBLY
PART NO.
BULK HOSE
NUMBER
CONNECTION
THREAD SIZE
TYPE OF
CONNECTION
CONNECTION
PART NUMBER
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1”
1”
1”
5 ft.
25 ft.
35 ft.
50 ft.
5 ft.
25 ft.
50 ft.
5 ft.
25 ft.
50 ft.
5 ft.
10 ft.
8
71-3380
71-3383
71-3390
71-3384
71-3300
71-3303
71-3304
71-3400
71-3403
71-3404
71-3360
71-3361
71-3367
71-280
71-280
71-280
71-280
71-282
71-282
71-282
71-283
71-283
71-283
71-285
71-285
71-285
3/8” NPS (f)
3/8” NPS (f)
3/8” NPS (f)
3/8” NPS (f)
3/8” NPS (f)
3/8” NPS (f)
3/8” NPS (f)
1/2” NPS (f)
1/2” NPS (f)
1/2” NPS (f)
1” NPS (f)
1” NPS (f)
1” NPS (f)
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
3 piece reusable
72-1306
72-1306
72-1306
72-1306
72-1328
72-1328
72-1328
72-1334
72-1334
72-1334
72-1936
72-1936
72-1936
77
Lighweight ErgoFlexTM Hose
Smooth Cover
Compare Binks’ new 3/8” I.D.
ErgoFlexTM HVLP Hose with any other
hose and see for yourself. There’s a
difference you can feel. Here’s what
makes Binks ErgoFlex HVLP Hose the
better hose:
• 40% lighter weight than standard 3/8”
I.D. air hose & fittings
• More flexible than 1/4”, 5/16” and 3/8”
I.D. air hose
• Durable, solvent resistant outer
covering
• 125 psi working pressure
• 600 psi burst pressure
• No outside clamp or locking device
required
• Conductive core, dissipates static
built-up at air tool
• Temperature range from - 40oF to
+200oF (Max.)
Recommended Use
Binks ErgoFlexTM HVLP Hose is
suitable for use with all kinds of airoperated equipment, including those
requiring lubricant in the air line, or in
environments where oil and grease are
present.
SIZES AVAILABLE
I.D.
O.D
BULK HOSE
NUMBER
MAXIMUM
WORKING
PRESSURE (PSI)
BEND
RADIUS
STD. REEL
LENGTH IN FT.
PLUS OR MINUS
50 FT.
SHIPPING WGT
BASED ON AVG.
FEET PER REEL
3/8”
71-31000
125
3 1/2”
500
70 lbs
Tube
SIZES
I.D.
LENGTH
OF HOSE
3/8”
3/8”
3/8”
25 ft.
50 ft.
6 ft.
Black EPDM Class B - Oil Resistance
Reinforcement
Synthetic yarn-Spiral reinforcement.
.646”
HOSE
WEIGHT
PER 100
FEET
12.8 lbs
ErgoFlexTM Hose Assemblies and Connections
HOSE ASSEMBLY BULK HOSE
PART NO.
NUMBER
71-31101
71-31102
71-31103
71-31000
71-31000
71-31000
CONNECTION
THREAD SIZE
TYPE OF
CONNECTION
CONNECTION
PART NO.
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
3 piece reusable
3 piece reusable
3 piece reusable
72-2008
72-2008
72-2008
Cover
Tan EPDM, smooth, Class C-Oil
resistance
I.D. Size
3/8” (9.53 mm)
O.D. Size
.646”
Connection
One-piece, plated brass, resuable.
(72-2008)
78
Specialized Hose Assemblies
Premium Airless Paint Spray Hose Conductive -- No Wire
Recommended Use
High pressure paint spray applications,
including electrical airless. Compatible
with a wide range of materials, solvents
and water based coatings. Designed for
the most durable and extended service.
Temperature range -40oF to +180oF.
Tube
Nylon - this no-wire hose incorporates a
nylon core tube with a conductive
polymer surrounding it. Electrical
conductivity will remain throughout the
hose life.
Reinforcement
High tensile nylon braid reinforcement.
Cover
Polyurethane, white or yellow depdning
on hose I.D.
Connections
Permanently attached, plated steel with
spring guards.
I.D. Sizes
3/16”, 1/4”, 5/16”, and 3/8”.
Specifications
I.D.
3/16”
1/4”
5/16”
3/8”
O.D.
RATED
W.P.
BEND
RADIUS
LBS./
100 FT.
.425”
.520”
.588”
.730”
3000 PSI
3000 PSI
3000 PSI
3000 PSI
1 1/2”
1 1/2”
2”
2 1/2”
4.7
7.9
8.2
13.3
JACKET
COLOR
SIZES
I.D.
LENGTH
OF HOSE
ASSEMBLY
PART NO.
CONNECTION
THREAD SIZE
TYPE OF
CONNECTION
3/16”
3/16”
3/16”
3/16”
1/4”
1/4”
1/4”
1/4”
5/16”
5/16”
5/16”
3/8”
3/8”
3/8”
3/8”
30” whip end
5 ft.
25 ft.
50 ft.
5 ft.
15 ft.
25 ft.
50 ft.
25 ft.
35 ft.
50 ft.
10 ft.
25 ft.
50 ft.
100 ft.
71-8360*
71-8085
71-8088
71-8089
71-7703
71-7703
71-7704
71-7705
71-7504
71-7508
71-7505
71-8422
71-8424
71-8425
71-8427
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
1/4” NPS (f)
3/8” NPS (f)
3/8” NPS (f)
3/8” NPS (f)
3/8” NPS (f)
permanent
permanent
permanent
permanent
permanent
permanent
permanent
permanent
permanent
permanent
permanent
permanent
permanent
permanent
permanent
Yellow Jacket color; White Jacket color
* Connection Thread = 1/4” NPS (f) x 1/4” NPT (m) w/30 deg. seat. Hose connector
72-691, 1/4” NPS(m) x 1/4” NPS(m) for connecting hose assemblies together. Bulk hose
not available - assemblies only.
Yellow Jacket color
White Jacket color
79
Specialized Hose Assemblies
Contractor Quality Airless Paint Spray Hose Conductive -- No Wire
Recommended Use
Connections
Designed specifically for commercial
and industrial painting contractors and
heavy work load applications. Excellent
flexibility and durability. For use with
both solvent and water-based coatings.
Permanently attached, plated steel with
spring guards.
I.D. Sizes
1/4”.
Tube
Nylon.
Reinforcement and Cover
Consists of a seamless extruded
synthetic braid reinforcement ad a pinpricked polyurethane cover. The
innermost braid layer is chemically
bonded to the innertube and the outer
layer is chemically bonded to the cover.
A static drain element consisting of
flexible electrically conductive plastic
tape is located between the braid layers.
Cover-black. Operating temperature
from 0oF to +200oF.
SIZES
I.D.
LENGTH
OF HOSE
ASSEMBLY
PART NO.
CONNECTION
THREAD SIZE
TYPE OF
CONNECTION
25 ft.
50 ft.
71-3530
71-3531
1/4” NPS (f)
1/4” NPS (f)
permanent
permanent
1/4”
1/4”
Working pressure 3,300 PSI.
Hose connector 72-691, Plated Steel, 1/49” NPS(m) x 1/49” NPS(m) for connecting hose
assemblies together.
Medium Pressure Paint Spray Hose Conductive - No Wire
Recommended Use
Construction
Raptor 18:1 outfit and other air assist
airless applications where working
pressures do not exceed 1740 psi.
Nylon tube reinforced with braided
polyester yarn. Conductivity is by
means of a conductive polymer strip.
The blue outer cover is polyurethane
and provides excellent abrasion
resistance. Operating temperature from
-40oF - 212oF.
Tube
Nylon
Connections
1/4” permanently attached, stainless
steel with spring guard.
Performance
• Low ID to OD ratios, lightweight
ergonomic
• Resistant to most chemicals, paints
and solvents
• Excellent flexibility with small bend
radius
ID
3/16”
Jacket
Color
Blue
80
OD
Length
of Hose
Hose Assembly
Part No.
Thread
Size
Type of
Connection
.380”
25’
71-4995
1/4”SS
permanent
Min. Bend
Radius
Working
Pressure
Min. Burst
Pressure
Weight
lb./ft.
1.2”
1740PSI
6960PSI
0.04
Tubing
Nylon, Polyethylene, Teflon and Reusable Connections
Nylon
Recommended Service
Moderate pressure service for conveying enamels, lacquers, and other finishes. (Solvent-resistant nylon tubing.)
Also suitable for amine catalysts in foam coating applications. May be used as an air hose (low pressure) in larger sizes shown.
CONNECTIONS
BULK
SOLID
SIZE TUBING NO.
1/8” 71-226
3/16” 71-230
1/4”
71-227
3/8”
71-229
Connections:
SOLID
THREAD
SWIVEL
PART NO.
SWIVEL
THREAD
1/8” NPT(m) 72-1676 1/4” NPS(f)
1/4”NPS(f)
1/4”NPS(f)
1/4”NPS(f)
1/8”NPT(m) 72-1680 1/4”NPS(f)
1/4”NPS(f)
1/4”NPS(f)
1/4”NPS(f)
1/4”NPS(f)
SWIVEL
PART NO.
SWIVEL
THREAD
72-1677
72-1679
72-1747•
72-179272-1681
72-1687•
72-1799*
72-180072-1811*
•Reusable, plated brass, with spring guard
-Reusable, stainless, with spring guard
*Reusable, stainless swivel nut and tailpiece
SWIVEL
PART NO.
3/8”NPS(f) 72-1805*
3/8”NPS(f) 72-1729
3/8”NPS(f) 72-1790*
3/8”NPS(f) 72-1683
3/8”NPS(f) 72-1689•
3/8”NPS(f) 72-1801*
3/8”NPS(f) 72-18023/8”NPS(f) 72-1685
3/8”NPS(f) 72-1812*
HOSE SIZE
I.D.
O.D.
RATED WORKING
PRESSURE (PSI)
70OF 150OF
LBS.
100
FEET
1/8 .225”
3/16” .264”
475 190
225 190
1.25
1.28
.350
225 190
2.18
3/8” .500”
200 140
3.90
1/7
All nylon tubing sold in bulk only - 500 ft.
Flexible nylon tubing, translucent, no reinforcement
Polyethylene
Recommended Service
Low pressure air and fluid service. Suitable for conveying water-based paints and catalyst, and for polyester, lacquer and fine
finishes
SIZE
BULK
TUBING NO.
1/4”
71-223
SWIVEL
THREAD
CONNECTIONS
SWIVEL
SWIVEL
THREAD
PART NO.
SWIVEL
PART NO.
1/4”NPS(f) 72-1579
1/4”NPS(f) 72-1583*
3/8”NPS(f)
3/8”NPS(f)
3/8”NPS(f)
Connections: *Reusable, plated brass, with spring guard
•Stainless steel swivel nut and tailpiece
72-1581
72-1585*
72-1839•
HOSE SIZE
I.D.
WALL
RATED
W.P. ,PSI
LBS./100
FEET
1/4” 1/16”
100
2.5
Polyethylene tubing sold per foot - no specific box size
Flexible polyethylene tubing, translucent, no reinforcement
Teflon, Fluid Tubing
SPECIFICATIONS
SIZE
BULK
TUBING NO.
1/8”
3/16”
1/4”
71-248
71-209
71-204
3/8”
71-207
SWIVEL
THREAD
CONNECTIONS
SWIVEL
SWIVEL
THREAD
PART NO.
SWIVEL
PART NO.
1/4”NPS(f) 72-1944
1/4”NPS(f) 72-1577
1/4”NPS(f) 72-1579
1/4”NPS(f) 72-1583*
1/4”NPS(f) 72-1811•
3/8”NPS(f)
3/8”NPS(f)
3/8”NPS(f)
3/8”NPS(f)
3/8”NPS(f)
3/8”NPS(f)
72-1945•
72-1730
72-1581
72-1585*
72-1685
72-1812•
BULK HOSE
TUBING NO.
71-204
71-209
71-207
71-248
HOSE SIZE
I.D
O.D
1/4”
3/16”
3/8”
1/8”
3/8”
5/16”
1/2”
1/4”
RATED W.P.
PSI
140
140
140
140
LBS./100
FEET
5
4.5
6.5
5
*Furnished with spring guard.
•Stainless steel swivel nut and tailpiece.
Teflon tubing sold per foot - no specific box size
81
w
Lo
72 Series Quick Disconnect
(Body and Stem Assembly)
M
M
ed
ed
iu
iu
m
m
&
&
Hi
Hi
gh
gh
Hose/Tube Accessories
Model 72-21712
Model 172-31611
Model 72-81611
Low & High Pressure Ball Valves
PART NO.
72-13030
72-14040
72-14030
PART NO.
72-83030
72-84040
72-81414
72-84030
72-84015
2-WAY 4000 PSI
BRASS HIGH PRESSURE
1/4(m)* x 1/4(m)*
3/8(m)* x 3/8(m)*
3/8(m)* x 1/4(m)*
PART NO.
2-WAY 250 PSI
DIE CAST (PLATED)
1/4(m)* x 1/4(m)*
3/8(m)* x 3/8(m)*
1/4 NPT (f) x 1/4 NPT (f)
3/8(m)* x 1/4(m)*
3/8(m)* x 3/8 NPT (f)
PART NO.
2-WAY 4000 PSI
STAINLESS STEEL
1/4(m)* x 1/4(m)*
3/8(m)* x 3/8(m)*
3/8NPT(f) x 1/4 NPT (f)
172-33535
172-34545
172-31414
3-WAY 250 PSI BRASS
PLATED (1/4 npt (f)
INLETS)
1/4 NPT (f) x 1/4 NPT (f)
1/4(m)* x 1/4(m)*
3/8 (m)* x 1/4 (m)*
73-81414
73-83030
73-84040
Low Pressure Fluid Quick
Disconnects
PART NO.
72-887
72-885
72-888
72-897
72-896
DESCRIPTION
THREAD
Stem Assembly Only 3/8”NPS(f)
Body Assembly Only 3/8”NPS(m)
Body & Stem Assembly 3/8”NPS(m)
X 3/8”NPS(f)
Body & Stem Assembly
3/8” ID Hose x 3/8”NPS(f)
Body Assembly Only 3/8” ID Hose
* Universal (m) thread
Part No. 72-445
(Stem Only)
Steel or Brass,
Body (plated
Plated Brass
Threads
Stainless Steel
Low Pressure Manifolds
PART NO.
PLATED
BRASS
STAINLESS
STEEL
THREADS
Air Valves
Low Pressure Air Quick
Disconnects
PART NO.
72-445
72-467
72-2063
72-2066
72-2073
72-470
SWIVEL NUT
72-1823
(2) 3/8”NPS(m)
72-1927*
(2) 1/4”NPS(m)
*Plated brass threads, plated steel body and swivel nut
3/8”NPS(f)
1/4”NPS(f)
Part No. 72-2063
(Body Only)
72-476
72-2076
DESCRIPTIONS
THREAD
Stem Assembly Only
1/4”NPS(f)
1/4”NPT(m)
Body Assembly Only 1/4”NPS(m)
5/16”ID Hose
1/4” NPT(f)
Body & Stem Assembly 1/4”NPS(m)
X 1/4”NPT(m)
1/4”NPT(f)
X 1/4” NPT(m)
1/4”NPS(m)
X 1/4” NPS (f)
Hose Sets
PART NO.
DESCRIPTION
6-438
25’ Air & Fluid (5/16” air x 3/8”fluid)
KB-4006 6’ Air & Fluid (5/16” air x 1/4” fluid)
High Flow Quick Disconnects
PART NO.
TYPE
PART NO.
THREAD
HAV-500 Straight 1/4” NPS(f) 1/4” NPS (m)
73-159
90 o
1/4” NPS(f) 1/4” NPS (m)
Hose Sleeve
PART NO.
DESCRIPTION
MSVAD-416 100’ Poly Hose Sleeve
82
HC-4699
HC-4700
PART NO.
HC-1166
HC-4419
TYPE
QD BODY
1/4”NPT(M) Hi-Flow QD Body
1/4”NPT(F) Hi-Flow QD Body
TYPE
QD STEM
1/4”NPT(M) Hi-Flow QD Stem
1/4”NPT(F) Hi-Flow QD Stem
Adapters, Nipples & Swivels
Low Pressure - 250 PSI Max.
90o Connections
Adapters (Plated Brass)
Double Male Nipples
PART NO.
MALE THREAD
FEMALE THREAD
73-131
72-55
72-54
73-130
1/4”NPS
1/4”NPS
3/8”NPS
3/8”NPS
1/4”NPS
3/8”NPS
1/4”NPS
3/8”NPS
Plated Brass
PART NO.
MALE THREAD
PART NO.
73-18
THREAD
1/4”NPS(m)
SWIVEL NUT
3/8”NPS
71-28*
1/8”NPT
1/4”NPS
57-126
1/8”NPS
1/4”NPS
83-576
1/4”NPT
1/4”NPS
57-13*
1/4”NPT
1/4”NPS
83-1050
1/4”NPS
1/4”NPS
73-50*
3/8” NPS
3/8” NPT
83-1185*
3/8”NPT
3/8”NPT
83-1823
1/2”NPS
1/2”NPT
83-1822*
3/4”NPS
3/4”NPT
72-423
1” NPT
1”NPS
Brass, *Plated Brass or Electroless
Nickel-Plated
High Pressure - 4000 PSI Max.
Adapters
PART NO.
PLATED STEEL STAINLESS
72-731
72-1110
102-2193
72-8111
MALE
THREAD
THREAD
PART NO.
3/8”NPS 1/4”NPS
3/8”NPT 1/4”NPS
3/4” NPT 3/4” NPS
72-690
72-691
72-792
72-969
72-790
72-791
83-2484
72-988
83-2055
72-1888
90o Connections
PART NO.
PLATED
STEEL STAINLESS
Swivel Unions and
Swivel Adapters
Double Male Nipples
FEMALE
72-798
72-1933
41-1235
72-1770
72-1981
MALE
THREAD
1/8”NPT
1/8”NPT
1/4”NPS
1/4” NPS
1/4”NPT
1/4” NPT
3/8”NPS
3/8”NPS
3/8”NPS
3/8”NPT
1/2”NPS
3/4”NPS
1” NPT
1/4”NPS
3/8”NPS
1/4”NPT
1/4”NPS
3/8”NPS
3-8” NPT
3/8”NPT
1/4”NPS
3/8”NPS
1/2”NPS
1/2”NPT
3/4”NPT
1” NPS
PART NO.
41-1412
83-1935 102-2126
103-1238
83-1697
72-918*
1/4”NPT(f) 1/4”NPS(f)
73-24* 3/8”NPS(m) 3/8”NPS(f)
SWIVEL
NUT
1/4”NPT(m) 1/4”NPS
1/4”NPT(m) 1/4”NPS
1/4”NPT(f) 3/8”NPS
3/8”NPT(f) 3/8”NPS
Hose or Gun Swivel
PART NO.
THREAD
THREAD
TYPE
72-780 Straight
Plated Steel
THREAD
1/4” NPS(m) 1/4”NPS(f)
*With Swivel Nut
83

ITW Binks Table Of Contents

Transcription

Similar documents

jouranl 8 - Blue Valley Schools

ZIMA 126-CS-Fabrication.indd

Presentation by Aura Licsandru, Romania

Chicago Products

Vroom24 Cabinet Installation

to now. - Kugel Komponents

Sanitation Through Separation - Cisco

Marvel Outdoor Mobile Beer Dispensers

KITCHEN FAUCETS