300 / 350 grilles

Transcription

300 / 350 grilles

300 / 350 grilles
metric
hospitals
sizes
H
Redefine your comfort zone. ™ | www.titus-hvac.com
MRI compatible
humid areas
prevents corrosion
Redefine your comfort zone™ | www.titus-hvac.com
Table of Contents
H
300 / 350 grilles
300/350 grille products
300/350 Grille Products......................................................................................................................................................................... H4
overview
Application Icons Key............................................................................................................................................................................ H3
Overview................................................................................................................................................................................................ H8
supply grilles
Supply Grilles........................................................................................................................................................................................ H9
3
/4” Spacing - Steel........................................................................................................................................................................ H9
301 (RL / RS) - Single Deflection................................................................................................................................................... H9
300 (RL / RS) - Double Deflection................................................................................................................................................. H9
Dimensions.................................................................................................................................................................................. H10
3
/4” Spacing - Aluminum............................................................................................................................................................. H11
301 (FL / FS) - Single Deflection................................................................................................................................................. H11
300 (FL / FS) - Double Deflection................................................................................................................................................ H11
Dimensions.................................................................................................................................................................................. H12
3
/4” Spacing - Stainless Steel...................................................................................................................................................... H13
301 (RL-SS / RS-SS) - Single Deflection...................................................................................................................................... H13
300 (RL-SS / RS-SS) - Double Deflection.................................................................................................................................... H13
Dimensions.................................................................................................................................................................................. H14
1
/2” Spacing - Steel...................................................................................................................................................................... H15
301 (RL-HD / RS-HD) - Single Deflection.................................................................................................................................... H15
300 (RL-HD / RS-HD) - Double Deflection................................................................................................................................... H15
Dimensions.................................................................................................................................................................................. H16
Performance Data........................................................................................................................................................................ H17
Performance Notes...................................................................................................................................................................... H22
Horizontal Deflection (Spread).................................................................................................................................................... H23
3
R-301F - Single Deflection.......................................................................................................................................................... H24
R-300F - Double Deflection......................................................................................................................................................... H24
Dimensions.................................................................................................................................................................................. H25
300 / 350 GRILLES
return grilles
H2
Return Grilles...................................................................................................................................................................................... H27
3
/4” Spacing - Steel...................................................................................................................................................................... H27
350 (RL / RS) - 35B Deflection..................................................................................................................................................... H27
350 (ZRL / ZRS) - 0B Deflection................................................................................................................................................... H27
Dimensions.................................................................................................................................................................................. H28
3
350 (FL / FS) - 35B Deflection...................................................................................................................................................... H29
350 (ZFL / ZFS) - 0B Deflection.................................................................................................................................................... H29
Dimensions.................................................................................................................................................................................. H30
3
/4” Spacing - Stainless Steel...................................................................................................................................................... H31
350 (RL-SS / RS-SS) - 45B Deflection.......................................................................................................................................... H31
Dimensions.................................................................................................................................................................................. H32
1
/2” Spacing - Steel...................................................................................................................................................................... H33
355 (RL / RS) - 35B Deflection..................................................................................................................................................... H33
355 (ZRL / ZRS) - 0B Deflection................................................................................................................................................... H33
Dimensions.................................................................................................................................................................................. H34
1
355 (FL / FS) - 35B Deflection...................................................................................................................................................... H35
355 (ZFL / ZFS) - 0B Deflection.................................................................................................................................................... H35
Dimensions.................................................................................................................................................................................. H36
350R, 350F and 350R-SS............................................................................................................................................................ H37
350ZR and 350ZF........................................................................................................................................................................ H39
355R and 355F ........................................................................................................................................................................... H41
355ZR and 355ZF ....................................................................................................................................................................... H43
Table of Contents (continued)
300 / 350 grilles
Filter Return Grilles............................................................................................................................................................................. H45
Steel, Aluminum and Stainless Steel.......................................................................................................................................... H45
350 (RLF / RSF) / 350 (FLF / FSF) / 355 (RLF / RSF) / 355 (FLF / FSF) / 350 (RLF-SS / RSF-SS).................................................. H45
options & accessories
Option & Accessories.......................................................................................................................................................................... H46
Border Types................................................................................................................................................................................ H47
Accessories................................................................................................................................................................................. H47
Oversize Grille Construction........................................................................................................................................................ H48
Screw Hole Location Chart.......................................................................................................................................................... H49
filter return grilles
H
APPLICATION ICONS KEY
for use in MRI environments & will not significantly affect
the diagnostic information
MRI compatible
for use in corrosive environment applications
prevents corrosion
humid areas
Diffuser module sizes are hard metric & inlets are soft.
Metric linear and grille products are converted to the
nearest ¼” for ordering. Contact us for more information.
metric sizes
300 / 350 GRILLES
especially suited to work in areas where high humidity
may become a factor
H3
300 / 350 grilles
300/350 Grille Products
300 / 350 GRILLES
H
H4
supply grilles
pages: H8-H23
301 (RL / RS)
300 (RL / RS)
301 (FL / FS)
300 (FL / FS)
STEEL SINGLE
DEFLECTION GRILLES
STEEL DOUBLE
DEFLECTION GRILLES
ALUMINUM SINGLE
DEFLECTION GRILLES
ALUMINUM DOUBLE
DEFLECTION GRILLES
• Available in ¾” blade spacing
• Individually adjustable blades
• Blades parallel to the long
or short dimension
• Standard finish is #26 white
• Blades parallel to the
long & short dimension
or short dimension
301 (RL-SS / RS-SS)
300 (RL-SS / RS-SS)
301 (RL-HD / RS-HD)
300 (RL-HD / RS-HD)
STAINLESS STEEL
SINGLE DEFLECTION
GRILLES
STAINLESS STEEL
DOUBLE DEFLECTION
GRILLES
HEAVY DUTY STEEL
SINGLE DEFLECTION
GRILLES
HEAVY DUTY STEEL
DOUBLE DEFLECTION
GRILLES
or short dimension
• Works well in corrosive
environments
• Standard finish is #04 mill
• Works well in corrosive
environments
• Available in ½” blade spacing
or short dimension
• Works well in areas
subject to abuse
• Available in ½” blade spacing
• Works well in areas
subject to abuse
300 / 350 grilles
300/350 Grille Products (continued)
R-301F
R-300F
ALUMINUM SINGLE DEFLECTION GRILLES
ALUMINUM DOUBLE DEFLECTION GRILLES
•
•
•
•
•
•
•
•
•
•
Available in ¾” blade spacing
Individually adjustable blades
Blades parallel to the long or short dimension
Standard finish is #26 white
Optional mounting bracket and damper available
Individually adjustable blades
Blades parallel to the long & short dimension
Standard finish is #26 white
Optional mounting bracket and damper available
round supply grilles
pages: H24-H26
H
300 / 350 GRILLES
H5
300 / 350 grilles
return grilles
pages: H23-H40
350 (RL / RS)
350 (ZRL / ZRS)
350 (FL / FS)
350 (ZFL / ZFS)
350 (RL-SS / RS-SS)
355 (RL / RS)
355 (ZRL / ZRS)
355 (FL / FS)
H
RETURN GRILLES
•
•
•
•
•
Available in ¾” or ½” blade spacing
35B, 45B and 0B deflection models to choose from
Available in steel, aluminum and stainless steel
Blades parallel to the long or short dimension
Finishes are either #26 white or #04 mill
300 / 350 GRILLES
355 (ZFL / ZFS)
H6
300 / 350 grilles
350 (FLF / FSF)
350 (RLF / RSF)
355 (RLF / RSF)
355 (FLF / FSF)
RETURN FILTER
GRILLES
RETURN FILTER
GRILLES
RETURN FILTER
GRILLES
RETURN FILTER
GRILLES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
35B deflection blades
Available in steel
Accommodates 1” or
2” thick filters
RETURN FILTER
GRILLES
•
•
•
•
Available in stainless steel
2” thick filters
Available in ½” blade spacing
Available in steel
2” thick filters
Available in ½” blade spacing
Available in aluminum
2” thick filters
H
300 / 350 GRILLES
350 (RLF-SS / RSF-SS)
Available in aluminum
2” thick filters
filter return grilles
page: H41
H7
300 / 350 grilles
Overview
The Titus 300 / 350 series of louvered supply and return grilles are the industry
standard for high quality, competitively priced grilles. The series is available in
steel, aluminum and stainless steel material to meet any job application. The
300 series supply grilles feature adjustable louvered blades in single or double
deflection with ¾” blade spacing. For industrial and institutional applications,
the 300 series are available in a heavy duty “HD” design that includes heavy
gauge frame and blades. The 350 series return grilles are available in ¾” or
½” blade spacing and 0 degree or 35 degree deflection to provide maximum
versatility for return air applications. The 350 series also include an option for
a factory installed filter rack to accommodate 1” or 2” thick filters. Optional opposed blade dampers are available for the 300 / 350 series in steel, aluminum
and stainless steel material and are factory installed.
300 / 350 OVERVIEW AT A GLANCE
Supply
Heavy
Duty Supply
Return
300 / 350 GRILLES
Filter Return
H8
Steel Border
Description
Function
H
• High quality, competitively priced grilles
• Defines the standard for the industry
• Available in steel, aluminum, or 304 stainless steel
• Available in supply, return, or filter return models
• Standard supply grilles available with ¾” blade spacing
• Return grilles available with ¾” or ½” blade spacing
• Front blades available parallel to the long or short dimension
Deflection
Blade Spacing
Single
Double
Single
¾”
¾”
½”
½” front
¾” rear
¾”
¾”
½”
½”
¾”
½”
Double
35° Fixed
0° Fixed
35° Fixed
0° Fixed
35° Fixed
35° Fixed
Aluminum Border
304 Stainless Steel
Long Front
Blades
Short Front
Blades
Long Front
Blades
Short Front
Blades
Long Front
Blades
Short Front
Blades
301RL
300RL
301RLHD
301RS
300RS
301RSHD
301FL
300FL
—
301FS
300FS
—
301RL-SS
300RL-SS
—
301RS-SS
300RS-SS
—
300RLHD
300RSHD
—
—
—
—
350RL
350ZRL
355RL
355ZRL
350RLF
355RLF
350RS
350ZRS
355RS
355ZRS
350RSF
355RSF
350FL
350ZFL
355FL
355ZFL
350FLF
355FLF
350FS
350ZFS
355FS
355ZFS
350FSF
355FSF
350RL-SS
—
—
—
350RLF-SS
—
350RS-SS
—
—
—
350RSF-SS
—
Model
Available
Material
Types
301
300
A
S
SS
•
•
•
•
•
•
Supply
Return
301HD 300HD
•
•
350
355
350Z
355Z
•
•
•
•
•
•
•
•
•
Note: A = Aluminum Border and Blades, S = Steel, SS = 304 Stainless Steel. Some aluminum and stainless steel models may be constructed of
all nonmagnetic components (no plastics) to meet MRI requirements. Consult your Titus representative for specific details. See individual model
information for construction details. Titus reserves the right to make product improvements on a continual basis. As products are updated, new
submittal sheets are published. Your Titus representative can provide you with updated technical information on all products.
300 / 350 grilles
300 / 350 Supply Grilles
301RS
• ¾” blade spacing
• Single deflection
• Blades parallel to the short dimension
301RL
• Same as 301RS with blades parallel to the long dimension
301RL
300RS
300RS
• Double deflection
301 / 300 (RL / RS)
• Front blades parallel to the short dimension
300RL
• Same as 300RS with front blades parallel to the long dimension
metric sizes
AVAILABLE MODELS:
See website for Specifications
H
Single Deflection Models
301RL
301RS
Double Deflection Models
300RL
300RS
FINISH
Standard Finish - #26 White
OVERVIEW
/4” Blade Spacing / Steel
3
PRODUCTS INCLUDE
• Material: Roll-formed Steel
• Welded Border
• Available Border Types:
#1 - Surface Mount
• Countersunk Screw Holes
• #8 x 1¼” Long Phillips Flat Head Sheet Metal Screws, Painted
White
• Optional Steel-Opposed Blade Damper
301 / 300 (RL / RS)
Titus’ 300 / 350 Series supply grilles define the standard for the industry.
With high quality and competitive pricing these grilles form the back
bone of a standard offering that will meet any application requirements.
H9
300 / 350 grilles
DIMENSIONS
301 / 300 (RL / RS) DIMENSIONS
Single Deflection Models 301RL / RS - Border Type 1
D plus 1¾"
9/16"
¾"
¼"
Screwdriver
Slot Operator
For Optional
Damper
Optional
Opposed
Blade
Damper
H
D minus ¾"
1¼"
1¼"
2½"
D minus ½"
Nominal Duct Size D"
Note:
When Damper
Is Full Open,
Add ൥" To
Overall Depth.
Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments
Odd and fractional sizes are available at additional cost
Double Deflection Models 300RL / RS - Border Type 1
9/16"
1¼"
D plus 1¾"
D minus ¾"
¾"
¼"
1¾"
3"
DIMENSIONS
Screwdriver
Slot Operator
For Optional
Damper
H10
Optional
Opposed
Blade
Damper
D minus ½"
All dimensions are in inches
Note:
When Damper Is
Full Open, Add ൥"
To Overall Depth.
300 / 350 grilles
300 / 350 Supply Grilles (continued)
301FS
• Great for areas with high humidity or subject to moisture
301FL
301FL
• Same as 301FS with blades parallel to the long dimension
300FS
300FL
• Same as 300FS with front blades parallel to the long dimension
300FS
301 / 300 (FL / FS)
metric sizes
AVAILABLE MODELS:
humid areas
H
301FL
301FS
300FL
300FS
FINISH
OVERVIEW
/4” Blade Spacing / Aluminum
3
PRODUCTS INCLUDE
• Material: Roll-formed Aluminum Border and Blades on sizes up to
24 x 24 inches. Extruded Aluminum Blades for Larger Sizes.
• Welded Border
#1 - Surface Mount
White
• Optional Steel or Aluminum Opposed-Blade Damper
301 / 300 (FL / FS)
H11
300 / 350 grilles
DIMENSIONS
H
301 / 300 (FL / FS) DIMENSIONS
Single Deflection Models 301FL / FS - Border Type 1
D plus 1¾"
9/16"
D minus ¾"
1¼"
¾"
Screwdriver
Slot Operator
For Optional
Damper
¼"
1¼"
2½"
Optional
Opposed
Blade
Damper
D minus ½"
Note:
When Damper Is
Full Open, Add ⅜"
To Overall Depth.
Double Deflection Models 300FL / FS - Border Type 1
9/16"
1¼"
D plus 1¾"
D minus ¾"
¾"
¼"
1⅞"
DIMENSIONS
Screwdriver
Slot Operator
For Optional
Damper
H12
Optional
Model AG-15
Opposed
Blade
Damper
D minus ½"
3⅛"
Note:
When Damper Is
Full Open, Add ⅜"
To Overall Depth.
300 / 350 grilles
301RS-SS
• Great for use in corrosive environments
• Available in 316 Stainless Steel
301RL-SS
• Same as 301RS-SS with blades parallel to the long dimension
300RS-SS
301RL-SS
300RS-SS
300RL-SS
• Same as 300RS-SS with front blades parallel to the long dimension
301 / 300 (RL-SS / RS-SS)
metric sizes
AVAILABLE MODELS:
prevents corrosion
H
301RL-SS
301RS-SS
300RL-SS
300RS-SS
FINISH
Standard Finish - #04 Mill
/4” Blade Spacing / Stainless Steel
3
PRODUCTS INCLUDE
• Material: 304 Stainless Steel Border and Blades
• Welded Border
#1 - Surface Mount
• #8 x 1¼” Long Phillips Flat Stainless Steel Head Sheet Metal
Screws
• Optional 304 Stainless Steel Opposed-Blade Damper
301 / 300 (RL-SS / RS-SS)
OVERVIEW
H13
300 / 350 grilles
DIMENSIONS
301 / 300 (RL-SS / RS-SS) DIMENSIONS
Single Deflection Models 301RL-SS / RS-SS - Border Type 1
Duct plus 1⅝"
1⅜"
¾"
15/64"
Duct Size minus ¼"
H
Double Deflection Models 300RL-SS / RS-SS - Border Type 1
Duct plus 1⅝"
1⅜"
¾"
DIMENSIONS
1¾"
H14
Duct Size minus ¼"
300 / 350 grilles
301RS-HD
• Great for use in areas subject to abuse
• ½” blade spacing
• 14-gauge blades, 18-gauge borders
301RL-HD
• Same as 301RS-HD with blades parallel to the long dimension
300RS-HD
• Great for use in areas subject to abuse
301RL-HD
300RS-HD
• 14-gauge blades, 18-gauge borders
300RL-HD
• Same as 300RS-HD with front blades parallel to the long dimension
301 / 300 (RL-HD / RS-HD)
prevents
metriccorrosion
sizes
AVAILABLE MODELS:
H
301RL-HD
301RS-HD
300RL-HD
300RS-HD
FINISH
1
PRODUCTS INCLUDE
• Material: Steel
• Welded Border
#1 - Surface Mount
White
• Optional Steel Opposed-Blade Damper
301 / 300 (RL-HD / RS-HD)
OVERVIEW
H15
300 / 350 grilles
DIMENSIONS
H
301 / 300 (RL-HD / RS-HD) DIMENSIONS
Single Deflection Models 301RL-HD / RS-HD - Border Type 1
D plus 1¾"
1¼"
9/16"
Adjustable
14 Gauge
Blades
½"
18 Gauge
Frame
1½"
¼"
1¼"
Screwdriver
Slot Operator
For Optional
Damper
2½"
Optional
Opposed
Blade
Damper
Note:
When Damper Is
Full Open, Add ⅜"
To Overall Depth.
D minus ½"
Nominal Duct Size D "
Double Deflection Models 300RL-HD / RS-HD - Border Type 1
D plus 1¾"
9/16"
1¼"
½"
Adjustable
14 Gauge
Front Blades
18 Gauge
Steel
Frame
DIMENSIONS
H16
¼"
1¾"
Screwdriver
Slot Operator
For Optional
Damper
Optional
Opposed
Blade
Damper
Adjustable
26 Gauge
Rear Blades
1½"
3"
D minus ½"
Nominal Duct Size D "
Note:
When Damper Is
Full Open, Add ⅜"
To Overall Depth.
300 / 350 grilles
PERFORMANCE DATA
NC-20
Nom.
Duct
Area
( ft2 )
Core
Area
( ft2 )
6x6
0.25
0.19
8x6
0.33
0.26
10x6
0.42
0.34
8x8
0.44
0.37
12x6
0.50
0.41
14x6
0.58
0.48
16x6
12x8
0.67
0.57
10x10
0.69
0.59
18x6
0.75
0.63
20x6
12x10
0.83
0.72
22x6
0.92
0.77
24x6
18x8
12x12
1.00
0.88
1.25
1.11
30x6
18x10
Core Vel.
Vel. Press.
0°
Total 22.5°
Press. 45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
300
0.006
0.016
0.018
0.028
57
5-7-14
4-6-11
2-3-6
78
5-9-16
4-7-13
2-4-7
102
6-10-19
5-8-14
3-4-8
111
6-10-19
5-8-15
3-5-9
123
7-11-20
5-8-16
3-5-9
144
7-12-22
6-9-17
3-5-10
171
8-13-24
6-10-19
4-6-11
177
8-13-24
6-10-19
4-6-11
189
8-14-25
7-11-20
4-6-11
216
9-15-27
7-11-21
4-7-12
231
9-15-28
7-12-22
4-7-13
264
10-16-30
8-12-23
4-7-13
333
11-18-34
9-14-26
5-8-15
400
0.010
0.029
0.033
0.049
76
7-10-16
5-8-12
3-4-7
104
8-12-19
6-9-15
3-5-8
136
9-13-21
7-10-17
4-6-10
148
9-14-22
7-11-17
4-6-10
164
10-15-24
8-11-18
4-7-11
192
11-16-25
8-12-20
5-7-11
228
11-17-28
9-13-22
5-8-12
236
12-18-28
9-14-22
5-8-13
252
12-18-29
9-14-23
5-8-13
288
13-19-31
10-15-24
6-9-14
308
13-20-32
10-16-25
6-9-15
352
14-21-34
11-17-27
6-10-16
444
11
16-24-39
12-19-30
7-11-17
500
0.016
0.046
0.051
0.077
95
8-12-18
6-10-14
4-6-8
130
11
10-15-21
8-11-16
4-7-9
170
12
11-17-24
9-13-19
5-7-11
185
13
12-17-25
9-13-19
5-8-11
205
13
12-18-26
9-14-20
5-8-12
240
14
13-20-28
10-15-22
6-9-13
285
15
14-22-31
11-17-24
6-10-14
295
15
15-22-32
11-17-24
7-10-14
315
15
15-23-33
12-18-25
7-10-15
360
16
16-24-35
12-19-27
7-11-16
385
16
17-25-36
13-19-28
8-11-16
440
16
18-27-39
14-21-30
8-12-17
555
17
20-30-43
16-23-34
9-14-19
600
0.022
0.066
0.074
0.111
114
15
10-14-20
8-11-15
4-6-9
156
17
12-16-23
9-13-18
5-7-10
204
18
13-19-26
10-14-20
6-8-12
222
18
14-19-27
11-15-21
6-9-12
246
19
15-20-29
11-16-22
7-9-13
288
19
16-22-31
12-17-24
7-10-14
342
20
17-24-34
13-19-26
8-11-15
354
20
18-24-35
14-19-27
8-11-16
378
20
18-25-36
14-20-28
8-11-16
432
21
19-27-38
15-21-30
9-12-17
462
21
20-28-40
16-22-31
9-13-18
528
22
21-30-42
17-23-33
10-13-19
666
23
24-34-47
19-26-37
11-15-21
700
0.031
0.090
0.100
0.152
133
20
12-15-21
9-12-16
5-7-10
182
21
14-18-25
11-14-19
6-8-11
238
23
16-20-28
12-16-22
7-9-13
259
23
16-21-30
13-16-23
7-9-13
287
23
17-22-31
13-17-24
8-10-14
336
24
18-24-34
14-18-26
8-11-15
399
25
20-26-37
16-20-28
9-12-17
413
25
20-26-37
16-20-29
9-12-17
441
25
21-27-39
16-21-30
9-12-17
504
26
23-29-41
17-23-32
10-13-19
539
26
23-30-43
18-23-33
11-14-19
616
26
25-32-46
19-25-35
11-15-21
777
27
28-36-51
22-28-40
13-16-23
Performance notes appear at end of table
800
0.040
0.117
0.131
0.198
152
24
13-16-23
10-12-18
6-7-10
208
25
15-19-27
12-15-21
7-8-12
272
27
18-21-30
14-17-23
8-10-14
296
27
18-22-32
14-17-25
8-10-14
328
27
19-24-33
15-18-26
9-11-15
384
28
21-25-36
16-20-28
9-11-16
456
29
23-28-39
18-22-30
10-12-18
472
29
23-28-40
18-22-31
10-13-18
504
29
24-29-41
18-23-32
11-13-19
576
30
25-31-44
20-24-34
11-14-20
616
30
26-32-46
20-25-35
12-15-21
704
30
28-34-49
22-27-38
13-16-22
888
31
32-39-55
25-30-42
14-17-25
NC-40
1000
0.062
0.183
0.204
0.309
190
31
15-18-25
11-14-20
7-8-11
260
32
17-21-30
13-16-23
8-9-13
340
33
20-24-34
15-19-26
9-11-15
370
34
20-25-35
16-19-27
9-11-16
410
34
21-26-37
17-20-29
10-12-17
480
35
23-28-40
18-22-31
10-13-18
570
35
25-31-44
20-24-34
11-14-20
590
35
26-32-45
20-24-35
12-14-20
630
36
27-33-46
21-25-36
12-15-21
720
36
28-35-49
22-27-38
13-16-22
770
37
29-36-51
23-28-40
13-16-23
880
37
31-39-55
24-30-42
14-17-25
1110
38
35-43-61
27-34-47
16-19-28
1200
0.090
0.263
0.294
0.445
228
36
16-20-28
12-15-22
7-9-12
312
38
19-23-32
15-18-25
8-10-15
408
39
21-26-37
17-20-29
10-12-17
444
39
22-27-39
17-21-30
10-12-17
492
39
24-29-41
18-22-32
11-13-18
576
40
25-31-44
20-24-34
11-14-20
684
41
28-34-48
22-26-37
12-15-22
708
41
28-35-49
22-27-38
13-16-22
756
41
29-36-51
23-28-39
13-16-23
864
42
31-38-54
24-30-42
14-17-24
924
42
32-40-56
25-31-43
15-18-25
1056
43
34-42-60
27-33-46
16-19-27
1332
44
39-47-67
30-37-52
17-21-30
1400
0.122
0.358
0.401
0.606
266
41
17-21-30
13-16-23
8-10-13
364
42
20-25-35
16-19-27
9-11-16
476
43
23-28-40
18-22-31
10-13-18
518
44
24-30-42
19-23-32
11-13-19
574
44
25-31-44
20-24-34
11-14-20
672
45
28-34-48
21-26-37
12-15-21
798
45
30-37-52
23-28-40
13-17-23
826
46
31-37-53
24-29-41
14-17-24
882
46
32-39-55
24-30-42
14-17-25
1008
46
34-41-58
26-32-45
15-19-26
1078
47
35-43-60
27-33-47
16-19-27
1232
47
37-46-65
29-35-50
17-21-29
1554
48
42-51-72
32-40-56
19-23-33
H
PERFORMANCE DATA
Nom.
Duct
Size
( in. )
NC-30
MODELS: 300R, 300F, 300R-SS, 300R-HD, 301R, 301F, 301R-SS AND 301R-HD
PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD
H17
300 / 350 grilles
PERFORMANCE DATA
H
NC-20
Nom.
Duct
Size
( in. )
Nom.
Duct
Area
( ft2 )
Core
Area
( ft2 )
14x14
1.36
1.22
36x6
27x8
18x12
1.50
1.35
22x10
1.53
1.37
30x8
24x10
1.67
1.49
42x6
18x14
1.75
1.59
16x16
1.78
1.62
2.00
1.82
18x18
2.25
2.07
42x8
24x14
2.33
2.14
36x10
30x12
2.50
2.29
48x8
24x16
2.67
2.46
20x20
2.78
2.57
36x12
24x18
3.00
2.75
PERFORMANCE DATA
48x6
36x8
24x12
18x16
H18
Core Vel.
Vel. Press.
0°
Total 22.5°
Press. 45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
300
0.006
0.016
0.018
0.028
366
12-19-35
9-15-27
5-8-16
405
12-20-37
10-15-29
6-9-17
411
12-20-37
10-16-29
6-9-17
447
13-21-39
10-16-30
6-9-17
477
13-22-40
10-17-31
6-10-18
486
14-22-41
11-17-31
6-10-18
546
14-23-43
11-18-33
6-10-19
621
15-25-46
12-19-36
7-11-21
642
16-25-47
12-19-36
7-11-21
687
16-26-48
12-20-37
7-12-22
738
17-27-50
13-21-39
8-12-22
771
17-27-51
13-21-40
8-12-23
825
18-28-53
14-22-41
8-13-24
400
0.010
0.029
0.033
0.049
488
11
17-25-41
13-20-31
8-11-18
540
12
18-26-43
14-21-33
8-12-19
548
12
18-27-43
14-21-33
8-12-19
596
12
19-28-45
14-22-35
8-13-20
636
12
19-29-46
15-22-36
9-13-21
648
12
19-29-47
15-22-36
9-13-21
728
13
20-31-50
16-24-38
9-14-22
828
13
22-33-53
17-25-41
10-15-24
856
13
22-33-54
17-26-42
10-15-24
916
14
23-34-56
18-27-43
10-16-25
984
14
24-36-58
18-28-45
11-16-26
1028
14
24-37-59
19-28-46
11-16-27
1100
15
25-38-61
20-29-47
11-17-27
500
0.016
0.046
0.051
0.077
610
18
21-31-45
16-24-35
9-14-20
675
18
22-33-48
17-26-37
10-15-21
685
18
22-33-48
17-26-37
10-15-22
745
19
23-35-50
18-27-39
10-16-23
795
19
24-36-52
19-28-40
11-16-23
810
19
24-36-52
19-28-41
11-16-24
910
19
26-38-55
20-30-43
12-17-25
1035
20
27-41-59
21-32-46
12-18-27
1070
20
28-42-60
22-32-47
13-19-27
1145
20
29-43-62
22-33-48
13-19-28
1230
21
30-45-64
23-35-50
13-20-29
1285
21
30-46-66
24-35-51
14-21-30
1375
21
31-47-68
24-37-53
14-21-31
600
0.022
0.066
0.074
0.111
732
23
25-35-50
20-27-39
11-16-22
810
24
26-37-52
21-29-41
12-17-24
822
24
27-37-53
21-29-41
12-17-24
894
24
28-39-55
22-30-43
13-17-25
954
24
29-40-57
22-31-44
13-18-26
972
24
29-41-57
22-31-44
13-18-26
1092
25
31-43-61
24-33-47
14-19-27
1242
25
33-46-65
25-36-50
15-21-29
1284
26
33-47-66
26-36-51
15-21-30
1374
26
34-48-68
27-37-53
16-22-31
1476
26
36-50-71
28-39-55
16-22-32
1542
26
37-51-72
28-40-56
16-23-32
1650
27
38-53-75
29-41-58
17-24-34
NC-30
700
0.031
0.090
0.100
0.152
854
28
29-38-54
23-29-42
13-17-24
945
28
31-40-57
24-31-44
14-18-25
959
28
31-40-57
24-31-44
14-18-26
1043
29
32-42-59
25-33-46
15-19-27
1113
29
34-43-61
26-34-48
15-20-28
1134
29
34-44-62
26-34-48
15-20-28
1274
30
36-46-66
28-36-51
16-21-30
1449
30
38-49-70
30-38-54
17-22-31
1498
30
39-50-71
30-39-55
18-23-32
1603
30
40-52-74
31-40-57
18-23-33
1722
31
42-54-76
32-42-59
19-24-34
1799
31
43-55-78
33-43-60
19-25-35
1925
31
44-57-81
34-44-63
20-26-36
NC-40
800
0.040
0.117
0.131
0.198
976
32
33-41-57
26-31-45
15-18-26
1080
32
35-43-60
27-33-47
16-19-27
1096
32
35-43-61
27-33-47
16-19-27
1192
33
37-45-63
28-35-49
16-20-29
1272
33
38-46-66
29-36-51
17-21-30
1296
33
38-47-66
30-36-51
17-21-30
1456
34
41-50-70
31-38-54
18-22-32
1656
34
43-53-75
33-41-58
19-24-34
1712
34
44-54-76
34-42-59
20-24-34
1832
34
45-56-79
35-43-61
20-25-35
1968
35
47-58-82
36-45-63
21-26-37
2056
35
48-59-83
37-46-65
22-27-38
2200
35
50-61-86
39-47-67
22-27-39
1000
0.062
0.183
0.204
0.309
1220
39
37-45-64
29-35-50
17-20-29
1350
39
39-48-68
30-37-52
18-21-30
1370
39
39-48-68
30-37-53
18-22-31
1490
39
41-50-71
32-39-55
18-23-32
1590
40
42-52-73
33-40-57
19-23-33
1620
40
43-52-74
33-41-57
19-24-33
1820
40
45-55-78
35-43-61
20-25-35
2070
41
48-59-84
37-46-65
22-27-38
2140
41
49-60-85
38-47-66
22-27-38
2290
41
51-62-88
39-48-68
23-28-40
2460
41
53-64-91
41-50-71
24-29-41
2570
42
54-66-93
42-51-72
24-30-42
2750
42
56-68-96
43-53-75
25-31-43
NC-50
1200
0.090
0.263
0.294
0.445
1464
44
41-50-70
31-39-55
18-22-32
1620
44
43-52-74
33-41-57
19-24-33
1644
44
43-53-75
33-41-58
19-24-34
1788
45
45-55-78
35-43-60
20-25-35
1908
45
46-57-80
36-44-62
21-26-36
1944
45
47-57-81
36-44-63
21-26-36
2184
46
50-61-86
38-47-67
22-27-39
2484
46
53-65-92
41-50-71
24-29-41
2568
46
54-66-93
42-51-72
24-30-42
2748
47
56-68-96
43-53-75
25-31-43
2952
47
58-71-100
45-55-77
26-32-45
3084
47
59-72-102
46-56-79
27-32-46
3300
47
61-75-106
47-58-82
27-34-48
1400
0.122
0.358
0.401
0.606
1708
49
44-54-76
34-42-59
20-24-34
1890
49
46-57-80
36-44-62
21-25-36
1918
49
46-57-81
36-44-62
21-26-36
2086
49
48-59-84
38-46-65
22-27-38
2226
50
50-61-87
39-48-67
23-28-39
2268
50
51-62-88
39-48-68
23-28-39
2548
50
54-66-93
42-51-72
24-30-42
2898
51
57-70-99
44-54-77
26-31-45
2996
51
58-71-101
45-55-78
26-32-45
3206
51
60-74-104
47-57-81
27-33-47
3444
51
62-76-108
48-59-84
28-34-49
3598
52
64-78-110
49-60-85
29-35-50
3850
52
66-81-114
51-63-88
30-36-51
300 / 350 grilles
PERFORMANCE DATA
NC-20
Nom.
Duct
Size
( in. )
48x10
30x16
24x20
22x22
42x12
36x14
24x22
30x18
48x12
36x16
24x24
36x18
36x20
30x24
42x18
42x20
30x28
48x18
36x24
30x30
300
0.006
0.016
0.018
0.028
933
19-30-56
15-23-44
8-14-25
942
19-30-56
15-23-44
8-14-25
966
19-31-57
15-24-44
9-14-26
1029
20-32-59
15-25-46
9-14-27
1050
20-32-60
15-25-46
9-14-27
1125
21-33-62
16-26-48
9-15-28
1266
22-35-65
17-27-51
10-16-29
1413
23-37-69
18-29-54
10-17-31
1482
24-38-71
18-29-55
11-17-32
1548
24-39-72
19-30-56
11-17-33
1653
25-40-75
19-31-58
11-18-34
1698
25-41-76
20-32-59
11-18-34
1782
26-42-78
20-32-60
12-19-35
400
0.010
0.029
0.033
0.049
1244
15
27-40-65
21-31-50
12-18-29
1256
15
27-40-65
21-31-50
12-18-29
1288
15
27-41-66
21-32-51
12-18-30
1372
15
28-42-68
22-33-53
13-19-31
1400
16
28-43-69
22-33-53
13-19-31
1500
16
29-44-71
23-34-55
13-20-32
1688
16
31-47-76
24-36-59
14-21-34
1884
17
33-49-80
26-38-62
15-22-36
1976
17
34-51-82
26-39-63
15-23-37
2064
17
35-52-84
27-40-65
16-23-38
2204
17
36-54-86
28-41-67
16-24-39
2264
18
36-54-87
28-42-68
16-24-39
2376
18
37-56-90
29-43-69
17-25-40
500
0.016
0.046
0.051
0.077
1555
22
33-50-72
26-39-56
15-23-33
1570
22
34-50-73
26-39-56
15-23-33
1610
22
34-51-74
26-40-57
15-23-33
1715
22
35-53-76
27-41-59
16-24-34
1750
22
36-53-77
28-41-60
16-24-35
1875
22
37-55-80
29-43-62
17-25-36
2110
23
39-59-84
30-45-65
18-26-38
2355
23
41-62-89
32-48-69
19-28-40
2470
24
42-63-91
33-49-71
19-28-41
2580
24
43-65-93
33-50-72
19-29-42
2755
24
45-67-96
35-52-75
20-30-43
2830
24
45-68-98
35-53-76
20-31-44
2970
24
46-69-100
36-54-78
21-31-45
600
0.022
0.066
0.074
0.111
1866
27
40-56-79
31-44-62
18-25-36
1884
27
40-56-80
31-44-62
18-25-36
1932
27
41-57-81
32-44-63
18-26-36
2058
28
42-59-83
33-46-65
19-27-38
2100
28
43-60-84
33-46-65
19-27-38
2250
28
44-62-87
34-48-68
20-28-39
2532
28
47-65-93
36-51-72
21-29-42
2826
29
49-69-98
38-54-76
22-31-44
2964
29
51-71-100
39-55-78
23-32-45
3096
29
52-72-102
40-56-79
23-33-46
3306
30
54-75-106
41-58-82
24-34-48
3396
30
54-76-107
42-59-83
24-34-48
3564
30
56-78-110
43-60-85
25-35-49
NC-40
700
0.031
0.090
0.100
0.152
2177
32
47-61-86
36-47-66
21-27-39
2198
32
47-61-86
37-47-67
21-27-39
2254
32
48-62-87
37-48-68
21-28-39
2401
32
49-64-90
38-49-70
22-29-41
2450
32
50-64-91
39-50-71
22-29-41
2625
33
51-67-94
40-52-73
23-30-42
2954
33
55-71-100
42-55-77
25-32-45
3297
33
58-75-106
45-58-82
26-34-48
3458
34
59-76-108
46-59-84
27-34-49
3612
34
60-78-110
47-61-86
27-35-50
3857
34
62-81-114
48-63-88
28-36-51
3962
34
63-82-116
49-63-90
28-37-52
4158
34
65-84-119
50-65-92
29-38-53
800
0.040
0.117
0.131
0.198
2488
36
53-65-92
41-50-71
24-29-41
2512
36
53-65-92
41-50-71
24-29-41
2576
36
54-66-93
42-51-72
24-30-42
2744
36
56-68-96
43-53-75
25-31-43
2800
36
56-69-97
44-53-75
25-31-44
3000
37
58-71-101
45-55-78
26-32-45
3376
37
62-76-107
48-59-83
28-34-48
3768
37
65-80-113
50-62-87
29-36-51
3952
38
67-82-116
52-63-90
30-37-52
4128
38
68-84-118
53-65-92
31-38-53
4408
38
70-86-122
55-67-95
32-39-55
4528
38
71-87-124
55-68-96
32-39-56
4752
38
73-90-127
57-69-98
33-40-57
NC-50
1000
0.062
0.183
0.204
0.309
3110
42
59-72-103
46-56-79
27-33-46
3140
42
59-73-103
46-56-80
27-33-46
3220
43
60-74-104
47-57-81
27-33-47
3430
43
62-76-108
48-59-83
28-34-48
3500
43
63-77-109
49-60-84
28-35-49
3750
43
65-80-113
50-62-87
29-36-51
4220
44
69-84-119
53-65-93
31-38-54
4710
44
73-89-126
56-69-98
33-40-57
4940
44
75-91-129
58-71-100
34-41-58
5160
45
76-93-132
59-72-102
34-42-59
5510
45
79-96-136
61-75-106
35-43-61
5660
45
80-98-138
62-76-107
36-44-62
5940
45
82-100-142
63-78-110
37-45-64
1200
0.090
0.263
0.294
0.445
3732
48
65-79-112
50-62-87
29-36-51
3768
48
65-80-113
50-62-87
29-36-51
3864
48
66-81-114
51-63-89
30-36-51
4116
48
68-83-118
53-65-91
31-38-53
4200
48
69-84-119
53-65-92
31-38-54
4500
49
71-87-123
55-68-96
32-39-55
5064
49
76-93-131
59-72-101
34-42-59
5652
50
80-98-138
62-76-107
36-44-62
5928
50
82-100-142
63-78-110
37-45-64
6192
50
84-102-145
65-79-112
38-46-65
6612
50
86-106-149
67-82-116
39-48-67
6792
50
87-107-152
68-83-117
39-48-68
7128
51
90-110-155
69-85-120
40-49-70
1400
0.122
0.358
0.401
0.606
4354
52
70-86-121
54-66-94
32-39-55
4396
53
70-86-122
55-67-94
32-39-55
4508
53
71-87-123
55-68-96
32-39-56
4802
53
74-90-127
57-70-99
33-41-57
4900
53
74-91-129
58-71-100
33-41-58
5250
53
77-94-133
60-73-103
35-42-60
5908
54
82-100-141
63-77-110
37-45-64
6594
54
86-106-149
67-82-116
39-48-67
6916
54
88-108-153
68-84-118
40-49-69
7224
55
90-110-156
70-86-121
41-50-70
7714
55
93-114-161
72-88-125
42-51-73
7924
55
94-116-164
73-90-127
43-52-74
8316
55
97-119-168
75-92-130
44-53-75
H
PERFORMANCE DATA
28x28
Core Vel.
Nom. Core
Vel. Press.
Duct Area
0°
Area ( ft2 ) Total 22.5°
( ft2 )
Press. 45°
cfm
NC
3.33 3.11
0°
Throw 22.5°
(ft)
45°
cfm
NC
3.36 3.14
0°
Throw 22.5°
(ft)
45°
cfm
NC
3.50 3.22
0°
Throw 22.5°
(ft)
45°
cfm
NC
3.67 3.43
0°
Throw 22.5°
(ft)
45°
cfm
NC
3.75 3.5
0°
Throw 22.5°
(ft)
45°
cfm
NC
4.00 3.75
0°
Throw 22.5°
(ft)
45°
cfm
NC
4.50 4.22
0°
Throw 22.5°
(ft)
45°
cfm
NC
5.00 4.71
0°
Throw 22.5°
(ft)
45°
cfm
NC
5.25 4.94
0°
Throw 22.5°
(ft)
45°
cfm
NC
5.44 5.16
0°
Throw 22.5°
(ft)
45°
cfm
NC
5.83 5.51
0°
Throw 22.5°
(ft)
45°
cfm
NC
6.00 5.66
0°
Throw 22.5°
(ft)
45°
cfm
NC
6.25 5.94
0°
Throw 22.5°
(ft)
45°
NC-30
H19
300 / 350 grilles
PERFORMANCE DATA
PERFORMANCE DATA
H
H20
NC-20
Nom.
Duct
Size
( in. )
Nom.
Duct
Area
( ft2 )
42x24
36x28
7.00
46x22
7.03
32x32
7.11
36x30
7.50
48x24
36x32
8.00
34x34
8.03
36x34
8.50
42x30
8.75
36x36
9.00
42x34
48x30
10.00
38x38
10.03
42x36
10.50
46x34
10.86
Core Vel.
300
Vel. Press.
0.006
0°
0.016
Total 22.5°
0.018
Press. 45°
0.028
1998
cfm
NC
6.66
28-44-82
0°
Throw 22.5° 21-34-64
12-20-37
(ft)
45°
2004
cfm
NC
6.68
28-44-82
0°
Throw 22.5° 21-34-64
12-20-37
(ft)
45°
2034
cfm
NC
6.78
28-45-83
0°
Throw 22.5° 22-34-64
12-20-37
(ft)
45°
2148
cfm
NC
7.16
29-46-85
0°
Throw 22.5° 22-35-66
13-21-38
(ft)
45°
2289
cfm
NC
7.63
29-47-88
0°
Throw 22.5° 23-37-68
13-21-40
(ft)
45°
2304
cfm
NC
7.68
30-47-88
0°
Throw 22.5° 23-37-68
13-21-40
(ft)
45°
2442
cfm
NC
8.14
30-49-91
0°
Throw 22.5° 24-38-70
14-22-41
(ft)
45°
2514
cfm
11
NC
8.38
31-49-92
0°
Throw 22.5° 24-38-71
14-22-41
(ft)
45°
2589
cfm
11
NC
8.63
31-50-94
0°
Throw 22.5° 24-39-72
14-23-42
(ft)
45°
2880
cfm
11
NC
9.6
33-53-99
0°
Throw 22.5° 26-41-76
15-24-44
(ft)
45°
2892
cfm
11
NC
9.64
33-53-99
0°
Throw 22.5° 26-41-77
15-24-44
(ft)
45°
3030
cfm
11
NC
10.1
34-54-101
0°
Throw 22.5° 26-42-78
15-24-46
(ft)
45°
3135
cfm
11
NC
10.45
34-55-103
0°
Throw 22.5° 27-43-80
16-25-46
(ft)
45°
Core
Area
( ft2 )
NC-30
NC-40
NC-50
400
0.010
0.029
0.033
0.049
500
0.016
0.046
0.051
0.077
600
0.022
0.066
0.074
0.111
700
0.031
0.090
0.100
0.152
800
0.040
0.117
0.131
0.198
1000
0.062
0.183
0.204
0.309
1200
0.090
0.263
0.294
0.445
1400
0.122
0.358
0.401
0.606
2664
18
39-59-95
30-46-74
18-26-43
2672
18
39-59-95
30-46-74
18-27-43
2712
18
40-59-96
31-46-74
18-27-43
2864
19
41-61-98
32-47-76
18-27-44
3052
19
42-63-102
33-49-79
19-28-46
3072
19
42-63-102
33-49-79
19-28-46
3256
19
43-65-105
34-50-81
20-29-47
3352
19
44-66-106
34-51-82
20-30-48
3452
19
45-67-108
35-52-84
20-30-49
3840
20
47-71-114
36-55-88
21-32-51
3856
20
47-71-114
37-55-88
21-32-51
4040
20
48-72-117
37-56-91
22-33-53
4180
20
49-74-119
38-57-92
22-33-53
3330
25
49-74-106
38-57-82
22-33-48
3340
25
49-74-106
38-57-82
22-33-48
3390
25
49-74-107
38-57-83
22-33-48
3580
25
51-76-110
39-59-85
23-34-50
3815
25
52-79-114
41-61-88
24-35-51
3840
25
53-79-114
41-61-88
24-36-51
4070
26
54-81-117
42-63-91
24-37-53
4190
26
55-82-119
43-64-92
25-37-54
4315
26
56-84-121
43-65-94
25-38-54
4800
26
59-88-127
46-68-99
26-40-57
4820
26
59-88-128
46-69-99
27-40-57
5050
27
60-91-131
47-70-101
27-41-59
5225
27
61-92-133
48-71-103
28-41-60
3996
30
59-82-116
46-64-90
26-37-52
4008
30
59-82-116
46-64-90
27-37-52
4068
30
59-83-117
46-64-91
27-37-53
4296
31
61-85-121
47-66-93
27-38-54
4578
31
63-88-124
49-68-96
28-40-56
4608
31
63-88-125
49-68-97
28-40-56
4884
31
65-91-128
50-70-100
29-41-58
5028
31
66-92-130
51-71-101
30-41-59
5178
31
67-94-132
52-72-103
30-42-60
5760
32
71-99-140
55-76-108
32-44-63
5784
32
71-99-140
55-77-108
32-44-63
6060
32
72-101-143
56-78-111
33-46-64
6270
32
74-103-146
57-80-113
33-46-66
4662
35
69-89-126
53-69-97
31-40-56
4676
35
69-89-126
53-69-97
31-40-57
4746
35
69-90-127
54-69-98
31-40-57
5012
35
71-92-130
55-71-101
32-41-59
5341
35
73-95-134
57-74-104
33-43-60
5376
36
74-95-135
57-74-104
33-43-61
5698
36
76-98-139
59-76-108
34-44-62
5866
36
77-100-141
60-77-109
35-45-63
6041
36
78-101-143
61-78-111
35-45-64
6720
36
82-107-151
64-83-117
37-48-68
6748
36
83-107-151
64-83-117
37-48-68
7070
37
85-109-155
65-85-120
38-49-70
7315
37
86-111-157
67-86-122
39-50-71
5328
39
77-95-134
60-74-104
35-43-60
5344
39
78-95-134
60-74-104
35-43-60
5424
39
78-96-135
61-74-105
35-43-61
5728
39
80-98-139
62-76-108
36-44-63
6104
39
83-102-144
64-79-111
37-46-65
6144
40
83-102-144
64-79-112
37-46-65
6512
40
86-105-148
66-81-115
39-47-67
6704
40
87-106-151
67-82-117
39-48-68
6904
40
88-108-153
68-84-118
40-49-69
7680
40
93-114-161
72-88-125
42-51-73
7712
40
93-114-161
72-88-125
42-51-73
8080
41
95-117-165
74-91-128
43-53-74
8360
41
97-119-168
75-92-130
44-53-76
6660
46
87-106-150
67-82-116
39-48-68
6680
46
87-106-150
67-82-116
39-48-68
6780
46
87-107-151
68-83-117
39-48-68
7160
46
90-110-156
70-85-121
40-50-70
7630
46
93-114-161
72-88-124
42-51-72
7680
46
93-114-161
72-88-125
42-51-73
8140
46
96-117-166
74-91-129
43-53-75
8380
47
97-119-168
75-92-130
44-54-76
8630
47
99-121-171
76-94-132
44-54-77
9600
47
104-127-180
81-99-140
47-57-81
9640
47
104-128-181
81-99-140
47-57-81
10100
47
107-131-185
83-101-143
48-59-83
10450
47
109-133-188
84-103-146
49-60-85
7992
51
95-116-164
74-90-127
43-52-74
8016
51
95-116-165
74-90-128
43-52-74
8136
51
96-117-166
74-91-129
43-53-75
8592
51
98-121-170
76-93-132
44-54-77
9156
52
102-124-176
79-96-136
46-56-79
9216
52
102-125-176
79-97-137
46-56-79
9768
52
105-128-182
81-100-141
47-58-82
10056
52
106-130-184
82-101-143
48-59-83
10356
52
108-132-187
84-103-145
49-60-84
11520
53
114-140-197
88-108-153
51-63-89
11568
53
114-140-198
88-108-153
51-63-89
12120
53
117-143-202
91-111-157
53-64-91
12540
53
119-146-206
92-113-160
53-66-93
9324
56
102-126-178
79-97-138
46-56-80
9352
56
103-126-178
80-97-138
46-57-80
9492
56
103-127-179
80-98-139
47-57-81
10024
56
106-130-184
82-101-143
48-59-83
10682
56
110-134-190
85-104-147
49-60-86
10752
56
110-135-191
85-104-148
50-61-86
11396
56
113-139-196
88-108-152
51-62-88
11732
57
115-141-199
89-109-154
52-63-90
12082
57
117-143-202
90-111-157
53-64-91
13440
57
123-151-213
95-117-165
55-68-96
13496
57
123-151-214
96-117-166
55-68-96
14140
57
126-155-219
98-120-169
57-70-98
14630
58
128-157-222
99-122-172
58-71-100
300 / 350 grilles
PERFORMANCE DATA
NC-20
Nom.
Duct
Size
( in. )
Nom.
Duct Core
Area
Area ( ft2 )
2
( ft )
42x38
11.08
10.67
40x40
11.11
10.7
48x36
12.00
11.57
42x42 12.25
11.82
44x44
13.44
12.99
48x42
14.00
13.54
46x46
14.69
14.22
48x46
15.33
14.85
48x48
16.00
15.50
NC-40
NC-50
300
0.006
0.016
0.018
0.028
400
0.010
0.029
0.033
0.049
500
0.016
0.046
0.051
0.077
600
0.022
0.066
0.074
0.111
700
0.031
0.090
0.100
0.152
800
0.040
0.117
0.131
0.198
1000
0.062
0.183
0.204
0.309
1200
0.090
0.263
0.294
0.445
1400
0.122
0.358
0.401
0.606
3201
12
35-56-104
27-43-81
16-25-47
3210
12
35-56-104
27-43-81
16-25-47
3471
12
36-58-108
28-45-84
16-26-49
3546
12
37-59-109
28-46-85
16-26-49
3897
12
38-62-115
30-48-89
17-28-52
4062
13
39-63-117
30-49-91
18-28-53
4266
13
40-64-120
31-50-93
18-29-54
4455
13
41-66-123
32-51-95
18-30-55
4650
13
42-67-125
33-52-97
19-30-56
4268
20
50-74-120
38-58-93
22-34-54
4280
20
50-75-120
39-58-93
22-34-54
4628
21
52-78-125
40-60-97
23-35-56
4728
21
52-78-126
40-61-98
24-35-57
5196
21
55-82-133
42-64-103
25-37-60
5416
21
56-84-135
43-65-105
25-38-61
5688
21
57-86-139
44-67-107
26-39-62
5940
22
59-88-142
45-68-110
26-40-64
6200
22
60-90-145
46-70-112
27-40-65
5335
27
62-93-134
48-72-104
28-42-60
5350
27
62-93-134
48-72-104
28-42-61
5785
27
65-97-140
50-75-108
29-44-63
5910
27
65-98-141
51-76-110
29-44-64
6495
28
68-103-148
53-80-115
31-46-67
6770
28
70-105-151
54-81-117
31-47-68
7110
28
72-107-155
56-83-120
32-48-70
7425
28
73-110-158
57-85-123
33-49-71
7750
28
75-112-162
58-87-125
34-50-73
6402
32
74-104-147
58-81-114
34-47-66
6420
32
75-104-147
58-81-114
34-47-66
6942
33
78-108-153
60-84-119
35-49-69
7092
33
78-109-155
61-85-120
35-49-70
7794
33
82-115-162
64-89-126
37-52-73
8124
33
84-117-166
65-91-128
38-53-75
8532
33
86-120-170
67-93-132
39-54-76
8910
34
88-123-174
68-95-134
40-55-78
9300
34
90-125-177
70-97-137
40-56-80
7469
37
87-112-159
67-87-123
39-51-71
7490
37
87-113-159
67-87-123
39-51-72
8099
37
90-117-165
70-91-128
41-53-74
8274
37
91-118-167
71-92-130
41-53-75
9093
38
96-124-175
74-96-136
43-56-79
9478
38
98-127-179
76-98-139
44-57-81
9954
38
100-130-183
78-101-142
45-58-83
10395
38
102-133-187
79-103-145
46-60-84
10850
38
105-135-192
81-105-148
47-61-86
8536
41
98-120-170
76-93-132
44-54-76
8560
41
98-120-170
76-93-132
44-54-77
9256
41
102-125-177
79-97-137
46-56-80
9456
41
103-126-179
80-98-139
46-57-80
10392
42
108-133-187
84-103-145
49-60-84
10832
42
110-135-191
86-105-148
50-61-86
11376
42
113-139-196
88-107-152
51-62-88
11880
42
116-142-200
90-110-155
52-64-90
12400
42
118-145-205
92-112-159
53-65-92
10670
48
110-134-190
85-104-147
49-60-85
10700
48
110-134-190
85-104-147
49-61-86
11570
48
114-140-198
88-108-153
51-63-89
11820
48
115-141-200
89-110-155
52-64-90
12990
48
121-148-210
94-115-162
54-67-94
13540
49
124-151-214
96-117-166
56-68-96
14220
49
127-155-219
98-120-170
57-70-99
14850
49
129-158-224
100-123-174
58-71-101
15500
49
132-162-229
102-125-177
59-73-103
12804
53
120-147-208
93-114-161
54-66-94
12840
53
120-147-208
93-114-161
54-66-94
13884
53
125-153-217
97-119-168
56-69-97
14184
53
126-155-219
98-120-170
57-70-99
15588
54
133-162-230
103-126-178
60-73-103
16248
54
135-166-234
105-128-182
61-75-105
17064
54
139-170-240
107-132-186
62-76-108
17820
54
142-174-245
110-134-190
64-78-110
18600
55
145-177-251
112-137-194
65-80-113
14938
58
130-159-225
101-123-174
58-71-101
14980
58
130-159-225
101-123-174
58-72-101
16198
58
135-165-234
105-128-181
61-74-105
16548
58
137-167-236
106-130-183
61-75-106
18186
58
143-175-248
111-136-192
64-79-112
18956
59
146-179-253
113-139-196
66-81-114
19908
59
150-183-259
116-142-201
67-83-117
20790
59
153-187-265
119-145-205
69-84-119
21700
59
156-192-271
121-148-210
70-86-122
• 0°, 22.5° & 45° represent blade deflection angles
• Performance data is based on duct sizes in bold, the performance
varies slightly for duct sizes not shown in bold
• See the section, Engineering Guidelines, for drop information when
selecting larger supply grilles for cooling purposes
• See the “Performance Notes” portion in this section for notes and
correction factors
• See the section, Engineering Guidelines, for catalog throw
information
• Each NC value represents the noise criteria curve that will not
be exceeded by the sound pressure in any of the octave bands, 2
through 7, with a room absorption of 10 dB, re 10-12 watts
H
PERFORMANCE DATA
Core Vel.
Vel. Press.
0°
Total 22.5°
Press. 45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
cfm
NC
0°
Throw 22.5°
(ft)
45°
NC-30
H21
300 / 350 grilles
• Performance data includes damper
• Core velocities are in feet per minute
0
• Throw values given are for isothermal
terminal velocities of 150, 100 and 50 fpm
CITY
1500
2000 CFM
20
0
10
20
30
Throw, Ft.
40
50
(Side view of air jet leaving wall mounted grille)
Drop Versus Throw without Ceiling Effect
TYPICAL 100 fpm ENVELOPE
0
400
10
0 fp
1000
ITY
OC
20
CIT
Y
500
1500
EL
10
ET V
ELO
700
800
TV
0
mJ
1000
600
JE
15
20
150
200
pm
Drop, Ft.
100 CFM
5
0f
All Titus supply grilles can be applied to variable
air volume systems with excellent results. For
detailed selection methods, consult your Titus
representative or the Engineering Guidelines
section of this catalog.
ET VE
LO
700
500
1000
30
VARIABLE AIR VOLUME
APPLICATIONS
10
15
• Bold dividing lines on H12-H16 denote
ranges of NC values
• For additional information concerning drop
and throw, see the Engineering Guidelines
section of this catalog
5
fpm J
1000
TY
• Each NC value represents the noise
criterion curve that will not be exceeded
by the sound pressure in any of the octave
bands, 2 through 7. Each NC value is based
on a room absorption of 10 dB, re 10-12
watts. Each NC value is further based on
grille operating at a 0° deflection. Settings
of 22½° or 45°, increase the stated
sound levels by 1 or 7 NC, respectively.
1500
100 CFM
200
400
600
800
I
OC
EL
TV
JE
Drop, Ft.
• All pressures are in inches of water
• Dash (—) in space indicates NC value less
than 10
PERFORMANCE DATA
TYPICAL 100 fpm ENVELOPE
• Data obtained from tests conducted in
accordance with ANSI/ASHRAE Standard
70-2006
• The stated deflection settings refer to the
horizontal setting of the blade’s deflection
angle. For a 20° upward deflection, use the
throw rating for the 0° setting and the total
pressure for the 22½° horizontal setting.
H22
Drop Versus Throw Showing Ceiling Effect - 20°F DT Cooling
pm
H
PERFORMANCE NOTES
0f
30
PERFORMANCE DATA
FM
2000 C
30
Throw, Ft.
40
(Side view of air jet leaving wall mounted grille)
Correction Factors for 300/301 Supply Grilles
Model
Damper
Ak /Ac
Throw
Total
Pressure
NC
300R, 300F
With
0.77
1.00
1.00
0
301R, 301F
Without
0.82
0.98
0.88
-2
Note: Throw and total pressure corrections are multipliers. The NC correction is
an addition. Ak is the flow factor. Ac is the core area from the main table.
50
300 / 350 grilles
PERFORMANCE DATA
0B Horizontal Deflection
10
The spread angle also affects the airstream
drop amount. Always consider for any given
temperature, volume and core velocity; the
wider spread results in a smaller drop. See
section, Engineering Guidelines, for more drop,
throw and spread relationship information.
Titus grilles can be selected with a single set
of blades for adjusting either horizontal or
vertical deflection, or with two sets of blades
for adjusting both horizontal and vertical
deflections.
0
DEFLECTION
50 fpm
0
Typical 100 fpm Envelope
150 fpm
5
10
0
10
20
30
40
50
THROW, FEET
Spread versus throw at 0° horizontal deflection angle (Plan view of air jet leaving wall mounted
grille).
22½B Horizontal Deflection
10
22
1/2
0
22 1/
2
5
221/2
DEFLECTION
Typical 100 fpm
Envelope
0
150 fpm
5
10
H
50 fpm
0
10
20
30
40
THROW, FEET
Spread versus throw at 22½° horizontal deflection angle (Plan view of air jet leaving wall
mounted grille).
20
45B Horizontal Deflection
15
50 fpm
45
0
45
45
DEFLECTION
Spread versus throw at 45°
horizontal deflection angle
(Plan view of air jet leaving wall
mounted grille).
5
Typical 100
fpm Envelope
0
150 fpm
5
10
15
PERFORMANCE DATA
10
SPREAD, FEET
Notice the outer shaded area represents the
50 fpm isovel, the white area, the 100 fpm
isovel, and the inner area, the 150 fpm isovel.
0
5
SPREAD, FEET
The figures depicting deflection, throw and
drop are based on actual tests conducted by
Titus. They show the relationship of spread to
throw for a typical high side-wall supply outlet
selection.
SPREAD, FEET
SUPPLY GRILLES
HORIZONTAL DEFLECTION (SPREAD)
20
0
5
10
15
20
25
THROW, FEET
H23
300 / 350 grilles
R-301F / R-300F
R-301F
• Grilles can be surface mounted or duct mounted. Mounting bracket
is installed and grille is inserted and rotated for quick mounting.
• Adjustable louvers
• All aluminum construction with radius end caps to match duct
diameters from 6” thru 36” in even increments
R-301F
R-300F
R-300FS
• Grilles can be surface mounted or duct mounted. Mounting bracket
is installed and grille is inserted and rotated for quick mounting.
• Adjustable louvers
H
• All aluminum construction with radius end caps to match duct
diameters from 6” thru 36” in even increments
prevents
metriccorrosion
sizes
AVAILABLE MODELS:
Single Deflection Model
R-301F
DUCT MINUS 1/16"
Double Deflection Model
R-300F
FINISHES
6 3/4
DUCT MINUS 1/16"
OVERVIEW
6 3/4
/4” Blade Spacing
/ Aluminum
B
MOUNTING RING
Titus’ R-300F/R-301F series is a round all-aluminum supply grille
A-A complement to our 3 "
offering. These distinctive grilles areSECTION
the perfect
8
standard 300 series that will meet any application requirements.
R-301F / R-300F
3"
8
SECTION A-A
3
H24
M
B
Optional Finish - #04 Mill
GRILLE
DAMPER
A
Damper option
A
A
A
GR
300 / 350 grilles
DIMENSIONS
Single Deflection Model R-301F
A
A
3"
4
SECTION A-A
NOMINAL
DUCT DIAMETER
A
NOM DUCT DIA
MINUS 1/8"
NOM DUCT DIA
MINUS 7/16"
3
48"
R-301F / R-300F DIMENSIONS
H
1 58 "
Double Deflection Model R-300F
NOM DUCT DIA
MINUS 7/16"
A
NOM DUCT DIA
3
48"
A
3"
4
3"
4
5
18"
SECTION A-A
DIMENSIONS
A
H25
300 / 350 grilles
PERFORMANCE DATA
H
MODELS: R-301F / R-300F
Duct Velocity, fpm
Nominal Nom. Duct
2
Duct Size Area (ft ) Velocity Pressure, IN WG
6
Ak=.125
0.196
8
Ak=.229
0.349
10
Ak=.367
0.545
12
Ak=.538
0.785
14
Ak=.743
1.069
16
Ak=.984
1.396
18
Ak=1.260
PERFORMANCE DATA
20
Ak=1.572
H26
1.767
2.182
300
400
500
600
700
800
900
1000
1100
1200
1300
0.006
0.010
0.016
0.022
0.031
0.040
0.050
0.062
0.075
0.090
0.105
Air Flow, cfm
Total Pressure, IN WG
NC (Noise Criteria)
Throw, FT
Air Flow, cfm
NC (Noise Criteria)
Throw, FT
Air Flow, cfm
NC (Noise Criteria)
Throw, FT
Air Flow, cfm
NC (Noise Criteria)
Throw, FT
Air Flow, cfm
NC (Noise Criteria)
Throw, FT
Air Flow, cfm
NC (Noise Criteria)
Throw, FT
38
0.004
3-4-8
69
0.004
3-5-10
110
0.004
3-5-10
161
0.004
4-6-12
223
0.004
4-6-12
295
0.003
4-7-13
50
0.007
4-6-12
92
0.007
4-7-13
147
0.007
5-7-14
215
0.007
5-8-16
297
0.006
6-9-17
394
0.006
6-9-17
63
0.011
5-7-14
115
0.011
5-8-16
183
0.010
6-9-17
269
0.010
7-10-20
372
0.010
7-11-21
492
0.009
7-11-22
75
0.016
6-9-17
138
0.015
6-10-19
220
0.015
7-11-21
323
0.015
8-12-24
446
0.014
8-13-25
590
0.014
9-13-26
88
0.021
6-10-19
161
0.021
7-11-22
257
0.021
8-12-24
376
0.020
9-14-28
520
0.019
10-15-29
689
0.018
10-15-30
100
0.028
7-11-21
184
0.027
8-13-25
293
0.027
10-15-29
430
0.026
10-16-31
595
0.025
11-17-33
787
0.024
12-18-35
113
0.035
8-13-25
206
0.035
10-15-29
330
0.034
11-16-32
484
0.033
12-18-36
669
0.032
13-19-38
886
0.030
13-20-39
125
0.044
20-28-40
229
0.043
10-16-31
367
0.042
12-18-36
538
0.041
13-20-39
743
0.039
14-21-42
984
0.038
15-22-44
138
0.053
10-15 -30
252
0.052
12-18-35
403
0.051
13-20-39
592
0.049
15-22-44
818
0.047
15-23-45
1082
0.045
22
16-24-48
150
0.063
11-17-34
275
0.062
13-19-38
440
0.060
14-22-43
645
0.059
16-24-47
892
0.056
22
17-25-50
1181
0.054
25
17-26-52
163
0.074
13-19-38
298
0.072
14-21-41
477
0.071
15-23-46
699
0.069
21
17-26-51
966
0.066
25
18-27-54
1279
0.063
28
19-29-57
Air Flow, cfm
NC (Noise Criteria)
Throw, FT
378
0.003
5-7-14
504
0.006
6-9-18
630
0.009
8-12-23
756
882
1008
1134
1260
1386
0.013
0.018
0.023
0.029
0.036
0.043
22
26
9-14-28 11-16-32 12-19-37 14-21-41 15-23-45 17-26-51
1512
0.051
29
18-28-55
1638
0.060
32
20-30-59
Air Flow, cfm
NC (Noise Criteria)
472
0.003
5-8-15
629
0.005
6-10-19
786
943
1101
1258
1415
1572
1730
0.008
0.012
0.016
0.021
0.027
0.033
0.040
21
25
28
8-12-24 10-15-30 11-17-34 13-19-38 14-22-43 16-24-47 18-27-53
1887
0.048
31
19-29-58
2044
0.057
34
21-31-62
• Throw values given are for terminal velocities of 150, 100 and 50
fpm and for isothermal conditions. Data is for double deflection
model set at bi-directional spread pattern of 22B. See the section,
Engineering Guidelines for additional throw information.
• The throw values listed are without ceiling effect. For throw values
with ceiling effect apply a correction factor of 1.4.
• All pressures given are in inches of water
• Velocity pressure is based on inlet duct area and velocity
• To obtain static pressure, subtract the velocity pressure from the
total pressure
• Noise criteria (NC) is based on an absorption in the room of 10 db
10-12 watts evaluated in octaves in range from 125 to 4000 Hz. Dash
(-) in space denotes an NC value of less than 20.
• Data was obtained by tests conducted in accordance with
standard ANSI/ASHRAE 70-2006 under isothermal conditions.
Actual performance with flexible duct may vary. See the section,
Engineering Guidelines for additional information.
300 / 350 grilles
300 / 350 Return Grilles
350 (RL-RS / ZRL-ZRS)
350RL
• 35° fixed deflection
• Reinforced corners
• Blades parallel to the long dimension
350RS
• Same as 350RL with blades parallel to the short dimension
350 (RL / RS)
350 (ZRL / ZRS)
350ZRL
350ZRS
• Same as 350ZRL with blades parallel to the short dimension
fire
ratedsizes
metric
AVAILABLE MODELS:
35B Deflection Models
350RL
350RS
350ZRL
350ZRS
H
White
FINISH
OVERVIEW
3
For Performance Data, refer to page H37 for 350R, and page H39 for
350ZR.
PRODUCTS INCLUDE
• Material: Roll-formed Steel Border and Blades
• Welded Border
#1 - Surface Mount
#2 - Snap-In
#3 - Lay-In
#4 - Spline
Titus’ 300 / 350 Series return grilles define the standard for the industry.
H27
300 / 350 grilles
DIMENSIONS
350 (RL-RS / ZRL-ZRS) DIMENSIONS
35B Deflection Models 350RL / RS - Border Type 1
D plus 1¾"
¾"
9/16"
Screwdriver
Slot Operator
For Optional
Damper
Optional
Opposed
Blade
Damper
H
D minus ¾"
1¼"
35°
¼"
1¼"
Duct minus ½"
2൦"
Note:
When Damper Is
Full Open, Add ൥"
To Overall Depth.
0B Deflection Models 350ZRL / ZRS - Border Type 1
D plus 1¾"
1¼"
9/16"
D minus ¾"
¾"
1¼"
Screwdriver
Slot Operator
For Optional
Damper
DIMENSIONS
Optional
Opposed
Blade
Damper
H28
¼"
2½"
D minus ½"
Note:
When Damper Is
Full Open, Add ⅜"
To Overall Depth.
300 / 350 grilles
300 / 350 Return Grilles (continued)
350FL
• MRI compatible
350FS
• Same as 350FL with blades parallel to the short dimension
350ZFL
350 (FL / FS)
350 (ZFL / ZFS)
• MRI compatible
350ZFS
• Same as 350ZFL with front blades parallel to the short dimension
350 (FL-FS / ZFL-ZFS)
metric sizes
AVAILABLE MODELS:
350FL
350FS
humid areas
MRI compatible
H
White
350ZFL
350ZFS
FINISH
OVERVIEW
3
350ZR.
PRODUCTS INCLUDE
24 x 24 inches. Extruded Aluminum Border for Larger Sizes.
• Welded Border.
#1 - Surface Mount
#2 - Snap-In
#3 - Lay-In
#4 - Spline
H29
300 / 350 grilles
DIMENSIONS
H
350 (FL-FS / ZFL-ZFS) DIMENSIONS
35° Deflection Models: 350FL / 350FS - Border Type 1
D plus 1¾"
D minus ¾"
1¼"
¾"
9/16"
Screwdriver
Slot Operator
For Optional
Damper
Optional
Opposed
Blade
Damper
35°
¼"
1¼"
Duct minus ½"
2½"
Note:
When Damper Is
Full Open, Add ൥"
To Overall Depth.
0° Deflection Models: 350ZFL / 350ZFS - Border Type 1
D plus 1¾"
1¼"
9/16"
D minus ¾"
¾"
1¼"
Screwdriver
Slot Operator
For Optional
Damper
Optional
Opposed
Blade
Damper
2½"
D minus ½"
DIMENSIONS
H30
¼"
Note:
When Damper Is
Full Open, Add ⅜"
To Overall Depth.
300 / 350 grilles
350RL-SS
350 (RL-SS)
350 (RS-SS)
350RS-SS
• Same as 350RL-SS with blades parallel to short dimension
• Tightly mitered corners
• Uniform polish finish
350 (RL-SS / RS-SS)
• Hollow airfoil blades anchored with nylon pivots for tight fit and
no rattling
• Exclusive tooling and roll-forming equipment means metal is not
contaminated with fragments of steel or aluminum
metric sizes
AVAILABLE MODELS:
prevents corrosion
H
350RL-SS
350RS-SS
FINISH
Standard Finish - #04 Mill
OVERVIEW
/4” Blade Spacing / Stainless Steel
3
For Performance Data, refer to page H33.
• Material: 304 Stainless Steel Border and Blades.
#1 - Surface Mount
• #8 x 1¼” Long 304 Stainless Steel Phillips Flat Head Sheet Metal
Screws
• Optional 304 Stainless Steel Opposed-Blade Damper
350 (RL-RS / RS-SS)
PRODUCTS INCLUDE
H31
300 / 350 grilles
DIMENSIONS
H
350 (RL-SS / RS-SS) DIMENSIONS
45° Deflection Models: 350RL-SS / 350RS-SS - Border Type 1
D plus 1⅝"
1⅜ "
¾"
45 °
1 5 / 64 "
Duct Size minus ¼"
STAINLESS STEEL MATERIAL PROPERTIES AND CHARACTERISTICS
TYPE 304 STAINLESS STEEL
Type 304, with its chromium-nickel content and low carbon, is the
most versatile and widely used type of stainless steel. It possesses
characteristics that provide resistance to oxidation and corrosion. Type
304 stainless steel provides good resistance to moderately acidic or
caustic solutions.
DIMENSIONS
TYPE 316 STAINLESS STEEL
H32
Type 316 is a chromium-nickel stainless and heat resisting steel with
superior corrosion resistance, as compared to other chromium-nickel steels,
when exposed to many types of chemical corrosives such as sea water,
brine solutions and the like. The addition of two percent molybdenum
makes type 316 more resistant to corrosion and oxidation. Type 316 is
considerably more resistant to solutions of sulfuric acid, chlorides,
bromides and fatty acids at high temperatures. In the manufacture of
pharmaceuticals, stainless steels containing molybdenum are required
in order to avoid excessive metallic contamination.
STAINLESS STEEL APPLICATIONS
Stainless steel is the number one preferred material for those situations
where corrosion, rusting or deterioration is a problem. However, that is
just where the uses begin.
When a high-tech effect is desired in a restaurant, hotel or corporate lobby,
nothing beats the clean lines and aesthetic beauty of stainless steel.
There are literally hundreds of additional applications, some include:
• Pharmaceutical Plants
• Food Processing Plants
• Showers and Locker Rooms
• Commercial Kitchens
• Wastewater Treatment Plants
• Bio-Medical Manufacturing
• Coastal Areas
• Industrial Applications
• Clean Rooms
• Laboratories
• Hospitals
• Dairy Facilities
• Beverage Plants
• Chemical Plants and Schools
300 / 350 grilles
355RL
355RS
• Same as 355RL with blades parallel to the short dimension
355 (RL / RS)
355 (ZRL / ZRS)
355ZRL
355ZRS
• Same as 355ZRL with front blades parallel to the short dimension
metric sizes
AVAILABLE MODELS:
355RL
355RS
355ZRL
355ZRS
H
White
FINISH
OVERVIEW
1
355ZR.
PRODUCTS INCLUDE
• Material: Roll-formed Steel Border and Blades
• Welded Border
#1 - Surface Mount
#2 - Snap-In
#3 - Lay-In
#4 - Spline
H33
300 / 350 grilles
DIMENSIONS
H
355 (RL-RS / ZRL-ZRS) DIMENSIONS
35° Deflection Models: 355RL / 355RS - Border Type 1
D plus 1¾"
D minus ¾"
1¼"
9/16"
½"
35°
¼"
Screwdriver
Slot Operator
For Optional
Damper
1¼"
2½"
Optional
Opposed
Blade
Damper
D minus ½"
Note:
When Damper Is
Full Open, Add ⅜"
To Overall Depth.
0° Deflection Models: 355ZRL / 355ZRS - Border Type 1
D plus 1¾"
1¼"
9/16"
D minus ¾"
½"
Screwdriver
Slot Operator
For Optional
Damper
Optional
Opposed
Blade
Damper
1¼"
2½"
D minus ½"
DIMENSIONS
H34
¼"
Note:
When Damper Is
Full Open, Add ⅜"
To Overall Depth.
300 / 350 grilles
355FL
• MRI compatible
355FS
• Same as 355FL with blades parallel to the short dimension
355ZFL
355 (FL / FS)
355 (ZFL / ZFS)
• MRI compatible
355ZFS
• Same as 355ZFL with front blades parallel to the short dimension
metric sizes
AVAILABLE MODELS:
355FL
355FS
humid areas
MRI compatible
H
White
355ZFL
355ZFS
FINISH
OVERVIEW
1
355ZR.
PRODUCTS INCLUDE
24 x 24 inches. Extruded Aluminum Border for Larger Sizes.
• Welded Border
#1 - Surface Mount
#2 - Snap-In
#3 - Lay-In
#4 - Spline
H35
300 / 350 grilles
DIMENSIONS
H
355 (FL-FS / ZFL-ZFS) DIMENSIONS
35° Deflection Models: 355FL / 355FS - Border Type 1
D plus 1¾"
D minus ¾"
1¼"
9/16"
½"
35°
¼"
Screwdriver
Slot Operator
For Optional
Damper
1¼"
2½"
Optional
Opposed
Blade
Damper
D minus ½"
Note:
When Damper Is
Full Open, Add ⅜"
To Overall Depth.
0° Deflection Models: 355ZFL / 355ZFS - Border Type 1
D plus 1¾"
1¼"
9/16"
D minus ¾"
½"
Screwdriver
Slot Operator
For Optional
Damper
DIMENSIONS
Optional
Opposed
Blade
Damper
H36
¼"
1¼"
2½"
D minus ½"
Note:
When Damper Is
Full Open, Add ⅜"
To Overall Depth.
300 / 350 grilles
PERFORMANCE DATA
NC-20
Nominal
Duct
Area
( ft2 )
0.25
Core
Area
( ft2 )
Core Velocity
Velocity Pressure
Neg. Static Pressure
100
0.001
0.002
200
0.002
0.008
300
0.006
0.018
400
0.010
0.032
500
0.016
0.051
600
0.022
0.073
700
0.031
0.099
800
0.040
0.130
900
0.050
0.164
0.19
8x6
0.33
0.26
10x6
0.42
0.34
8x8
0.44
0.37
12x6
0.5
0.41
14x6
0.58
0.48
16x6
12x8
0.67
0.57
10x10
0.69
0.59
18x6
20x6
12x10
0.75
0.63
0.83
0.72
22x6
24x6
12x12
30x6
18x10
0.92
0.77
1
0.88
1.25
1.11
14x14
36x6
18x12
1.36
1.22
1.5
1.35
22x10
30x8
24x10
42x6
18x14
16x16
1.53
1.37
1.67
1.49
1.75
1.78
1.59
1.62
24x12
18x16
18x18
2
1.82
2.25
2.07
24x14
2.33
2.14
30x12
2.5
2.29
24x16
2.67
2.46
20x20
2.78
2.57
36x12
3
2.75
30x16
24x20
3.33
3.11
22x22
42x12
36x14
3.36
3.14
3.5
3.22
24x22
3.67
3.43
30x18
3.75
3.5
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
19
26
34
37
41
48
57
59
63
72
77
88
111
122
135
137
149
159
162
182
207
214
229
246
257
275
311
314
322
343
350
-
38
52
68
74
82
96
114
118
126
144
154
176
222
244
270
274
298
318
324
364
414
428
458
492
514
550
622
628
644
686
700
-
57
78
102
111
123
144
171
177
189
216
231
264
333
366
405
411
447
477
486
546
621
642
687
738
771
825
933
942
966
1029
1050
-
76
104
136
148
164
192
228
236
252
288
308
352
444
488
540
548
596
636
648
728
828
856
916
984
1028
1100
1244
1256
1288
1372
1400
-
95
130
170
185
205
240
285
10
295
10
315
10
360
11
385
11
440
11
555
12
610
12
675
13
685
13
745
14
795
14
810
14
910
14
1035
14
1070
14
1145
15
1230
15
1285
16
1375
16
1555
17
1570
17
1610
17
1715
17
1750
17
114
13
156
15
204
16
222
16
246
17
288
18
342
19
354
19
378
19
432
19
462
19
528
19
666
20
732
20
810
20
822
20
894
21
954
21
972
21
1092
21
1242
21
1284
22
1374
22
1476
22
1542
23
1650
23
1866
24
1884
24
1932
24
2058
24
2100
24
133
19
182
20
238
21
259
22
287
22
336
24
399
25
413
25
441
25
504
25
539
25
616
25
777
26
854
27
945
27
959
27
1043
27
1113
27
1134
27
1274
28
1449
28
1498
28
1603
28
1722
29
1799
29
1925
29
2177
30
2198
30
2254
30
2401
30
2450
30
152
25
208
26
272
28
296
28
328
30
384
30
456
30
472
31
504
32
576
30
616
30
704
30
888
32
976
32
1080
32
1096
32
1192
33
1272
33
1296
33
1456
33
1656
33
1712
33
1832
33
1968
34
2056
34
2200
34
2488
35
2512
35
2576
36
2744
36
2800
36
171
29
234
30
306
32
333
32
369
34
432
34
513
35
531
35
567
35
648
35
693
35
792
35
999
35
1098
35
1215
35
1233
36
1341
37
1431
37
1458
37
1638
38
1863
38
1926
38
2061
38
2214
39
2313
39
2475
39
2799
40
2826
40
2898
40
3087
40
3150
40
• Static pressures are negative, in inches of water,
measured per ANSI/ASHRAE Standard 70-2006
• NC based on room absorption of 10 dB, re 10-12 watts,
NC-30
H
NC-40
PERFORMANCE DATA
Nominal
Duct
Size
( in. )
6x6
350R, 350F AND 350R-SS
H37
300 / 350 grilles
PERFORMANCE DATA
PERFORMANCE DATA
H
H38
350R, 350F AND 350R-SS
NC-20
Nominal
Duct
Size
( in. )
48x12
24x24
Nominal
Duct
Area
( ft2 )
Core
Area
( ft2 )
4
3.75
36x18
36x20
30x24
4.5
4.22
5
4.71
42x18
5.25
4.94
28x28
42x20
30x28
48x18
36x24
5.44
5.16
5.83
5.51
6
5.66
30x30
42x24
36x28
6.25
5.94
7
6.66
46x22
7.03
6.68
32x32
7.11
6.78
36x30
48x24
36x32
7.5
7.16
8
7.63
34x34
8.03
7.68
36x34
8.5
8.14
42x30
8.75
8.38
36x36
42x34
48x30
9
8.63
10
9.6
38x38
10.03
9.64
42x36
10.5
10.1
46x34
10.86
10.45
42x38
11.08
10.67
40x40
11.11
10.7
48x36
12
11.57
42x42
12.25
11.82
44x44
13.44
12.99
48x42
14
13.54
46x46
14.69
14.22
48x46
15.33
14.85
48x48
16
15.5
NC-30
NC-40
Core Velocity
Velocity Pressure
100
0.001
0.002
200
0.002
0.008
300
0.006
0.018
400
0.010
0.032
500
0.016
0.051
600
0.022
0.073
700
0.031
0.099
800
0.040
0.130
900
0.050
0.164
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
375
422
471
494
516
551
566
594
666
668
678
716
763
768
814
838
863
960
964
1010
1045
1067
1070
1157
1182
1299
1354
1422
1485
1550
-
750
844
942
988
1032
1102
1132
1188
1332
1336
1356
1432
1526
1536
1628
1676
1726
1920
1928
2020
2090
2134
2140
2314
2364
2598
2708
2844
2970
3100
-
1125
1266
1413
1482
1548
1653
1698
1782
1998
2004
2034
2148
2289
2304
2442
2514
2589
2880
2892
3030
3135
3201
3210
3471
3546
3897
4062
4266
4455
4650
-
1500
1688
1884
1976
2064
2204
10
2264
10
2376
10
2664
10
2672
10
2712
10
2864
10
3052
10
3072
10
3256
11
3352
11
3452
11
3840
11
3856
11
4040
11
4180
11
4268
11
4280
11
4628
11
4728
11
5196
12
5416
12
5688
12
5940
12
6200
13
1875
18
2110
18
2355
18
2470
18
2580
18
2755
18
2830
18
2970
18
3330
19
3340
19
3390
19
3580
19
3815
19
3840
19
4070
19
4190
20
4315
20
4800
20
4820
20
5050
20
5225
20
5335
20
5350
20
5785
20
5910
20
6495
21
6770
21
7110
21
7425
22
7750
22
2250
25
2532
25
2826
25
2964
25
3096
25
3306
26
3396
26
3564
26
3996
26
4008
27
4068
27
4296
27
4578
27
4608
27
4884
27
5028
27
5178
27
5760
27
5784
27
6060
27
6270
27
6402
27
6420
27
6942
27
7092
27
7794
28
8124
28
8532
28
8910
28
9300
29
2625
37
2954
31
3297
31
3458
31
3612
32
3857
32
3962
32
4158
32
4662
32
4676
32
4746
32
5012
32
5341
32
5376
32
5698
32
5866
32
6041
33
6720
33
6748
33
7070
33
7315
33
7469
33
7490
33
8099
33
8274
33
9093
34
9478
34
9954
35
10395
35
10850
35
3000
38
3376
38
3768
38
3952
38
4128
38
4408
38
4528
38
4752
38
5328
38
5344
38
5424
38
5728
38
6104
38
6144
38
6512
38
6704
38
6904
38
7680
38
7712
38
8080
38
8360
38
8536
38
8560
38
9256
39
9456
39
10392
39
10832
40
11376
40
11880
40
12400
40
3375
41
3798
41
4239
41
4446
41
4644
41
4959
41
5094
41
5346
41
5994
41
6012
42
6102
42
6444
42
6867
42
6912
42
7326
42
7542
42
7767
43
8640
43
8676
43
9090
43
9405
43
9603
43
9630
43
10413
44
10638
44
11691
44
12186
45
12798
45
13365
45
13950
45
300 / 350 grilles
PERFORMANCE DATA
NC-10
NC-20
NC-30
NC-40
Nominal
Duct
Area
( ft2 )
0.25
Core
Area
( ft2 )
Core Velocity
Velocity Pressure
300
0.006
0.012
400
0.010
0.022
500
0.016
0.034
600
0.022
0.049
700
0.031
0.067
900
0.050
0.111
1100
0.075
0.165
1300
0.105
0.231
1500
0.140
0.307
0.19
8x6
0.33
0.26
10x6
0.42
0.34
8x8
0.44
0.37
12x6
0.5
0.41
14x6
0.58
0.48
16x6
12x8
0.67
0.57
10x10
0.69
0.59
18x6
20x6
12x10
0.75
0.63
0.83
0.72
22x6
24x6
12x12
30x6
18x10
0.92
0.77
1
0.88
1.25
1.11
14x14
36x6
18x12
1.36
1.22
1.5
1.35
22x10
30x8
24x10
42x6
18x14
16x16
1.53
1.37
1.67
1.49
1.75
1.78
1.59
1.62
24x12
18x16
18x18
2
1.82
2.25
2.07
24x14
2.33
2.14
30x12
2.5
2.29
24x16
2.67
2.46
20x20
2.78
2.57
36x12
3
2.75
30x16
24x20
3.33
3.11
22x22
42x12
36x14
3.36
3.14
3.5
3.22
24x22
3.67
3.43
30x18
3.75
3.5
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
57
78
102
111
123
144
171
177
189
216
231
264
333
366
405
411
447
477
486
546
621
642
687
738
771
825
933
942
966
1029
1050
-
76
104
136
148
164
192
228
236
252
288
308
352
444
488
540
548
596
636
648
728
828
856
916
984
1028
1100
1244
1256
1288
1372
1400
-
95
130
170
185
205
240
285
295
315
360
385
440
555
11
610
11
675
12
685
12
745
12
795
13
810
13
910
13
1035
14
1070
14
1145
14
1230
15
1285
15
1375
15
1555
16
1570
16
1610
16
1715
16
1750
16
114
156
204
11
222
12
246
12
288
13
342
13
354
14
378
14
432
14
462
15
528
15
666
16
732
17
810
17
822
17
894
18
954
18
972
18
1092
18
1242
19
1284
19
1374
19
1476
20
1542
20
1650
20
1866
21
1884
21
1932
21
2058
21
2100
21
133
13
182
14
238
16
259
16
287
16
336
17
399
18
413
18
441
18
504
19
539
19
616
20
777
21
854
21
945
22
959
22
1043
22
1113
22
1134
22
1274
23
1449
23
1498
24
1603
24
1722
24
1799
24
1925
25
2177
25
2198
25
2254
25
2401
26
2450
26
171
20
234
22
306
23
333
23
369
24
432
24
513
25
531
25
567
25
648
26
693
26
792
27
999
28
1098
28
1215
29
1233
29
1341
29
1431
29
1458
30
1638
30
1863
31
1926
31
2061
31
2214
31
2313
32
2475
32
2799
32
2826
32
2898
33
3087
33
3150
33
209
26
286
27
374
28
407
29
451
29
528
30
627
31
649
31
693
31
792
32
847
32
968
33
1221
34
1342
34
1485
35
1507
35
1639
35
1749
35
1782
35
2002
36
2277
36
2354
37
2519
37
2706
37
2827
37
3025
38
3421
38
3454
38
3542
38
3773
39
3850
39
247
31
338
32
442
33
481
34
533
34
624
35
741
36
767
36
819
36
936
37
1001
37
1144
37
1443
38
1586
39
1755
39
1781
39
1937
40
2067
40
2106
40
2366
41
2691
41
2782
41
2977
42
3198
42
3341
42
3575
42
4043
43
4082
43
4186
43
4459
43
4550
43
285
35
390
36
510
37
555
38
615
38
720
39
855
40
885
40
945
40
1080
41
1155
41
1320
42
1665
43
1830
43
2025
43
2055
43
2235
44
2385
44
2430
44
2730
45
3105
45
3210
45
3435
46
3690
46
3855
46
4125
47
4665
47
4710
47
4830
47
5145
47
5250
48
H
PERFORMANCE DATA
Nominal
Duct
Size
( in. )
6x6
350ZR AND 350ZF
H39
300 / 350 grilles
PERFORMANCE DATA
PERFORMANCE DATA
H
350ZR AND 350ZF
NC-10
Nominal
Duct
Size
( in. )
48x12
24x24
Nominal
Duct
Area
( ft2 )
Core
Area
( ft2 )
4
3.75
36x18
36x20
30x24
4.5
4.22
5
4.71
42x18
5.25
4.94
28x28
42x20
30x28
48x18
36x24
5.44
5.16
5.83
5.51
6
5.66
30x30
42x24
36x28
6.25
5.94
7
6.66
46x22
7.03
6.68
32x32
7.11
6.78
36x30
48x24
36x32
7.5
7.16
8
7.63
34x34
8.03
7.68
36x34
8.5
8.14
42x30
8.75
8.38
36x36
42x34
48x30
9
8.63
10
9.6
38x38
10.03
9.64
42x36
10.5
10.1
46x34
10.86
10.45
42x38
11.08
10.67
40x40
11.11
10.7
48x36
12
11.57
42x42
12.25
11.82
44x44
13.44
12.99
48x42
14
13.54
46x46
14.69
14.22
48x46
15.33
14.85
48x48
16
15.5
NC-20
NC-30
NC-40
Core Velocity
Velocity Pressure
300
0.006
0.012
400
0.010
0.022
500
0.016
0.034
600
0.022
0.049
700
0.031
0.067
900
0.050
0.111
1100
0.075
0.165
1300
0.105
0.231
1500
0.140
0.307
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
1125
1266
1413
1482
1548
1653
1698
1782
1998
2004
2034
2148
2289
2304
2442
2514
2589
2880
2892
3030
3135
3201
3210
3471
3546
3897
4062
4266
4455
4650
-
1500
1688
1884
11
1976
11
2064
11
2204
12
2264
12
2376
12
2664
12
2672
12
2712
13
2864
13
3052
13
3072
13
3256
13
3352
13
3452
14
3840
14
3856
14
4040
14
4180
14
4268
14
4280
15
4628
15
4728
15
5196
15
5416
16
5688
16
5940
16
6200
16
1875
16
2110
17
2355
17
2470
18
2580
18
2755
18
2830
18
2970
18
3330
19
3340
19
3390
19
3580
19
3815
19
3840
19
4070
20
4190
20
4315
20
4800
20
4820
20
5050
21
5225
21
5335
21
5350
21
5785
21
5910
21
6495
22
6770
22
7110
22
7425
22
7750
23
2250
22
2532
22
2826
23
2964
23
3096
23
3306
23
3396
23
3564
24
3996
24
4008
24
4068
24
4296
24
4578
25
4608
25
4884
25
5028
25
5178
25
5760
26
5784
26
6060
26
6270
26
6402
26
6420
26
6942
26
7092
27
7794
27
8124
27
8532
27
8910
28
9300
28
2625
26
2954
27
3297
27
3458
27
3612
27
3857
28
3962
28
4158
28
4662
28
4676
29
4746
29
5012
29
5341
29
5376
29
5698
29
5866
29
6041
30
6720
30
6748
30
7070
30
7315
30
7469
31
7490
31
8099
31
8274
31
9093
31
9478
32
9954
32
10395
32
10850
32
3375
33
3798
34
4239
34
4446
34
4644
35
4959
35
5094
35
5346
35
5994
36
6012
36
6102
36
6444
36
6867
36
6912
36
7326
37
7542
37
7767
37
8640
37
8676
37
9090
38
9405
38
9603
38
9630
38
10413
38
10638
38
11691
39
12186
39
12798
39
13365
39
13950
39
4125
39
4642
39
5181
40
5434
40
5676
40
6061
41
6226
41
6534
41
7326
41
7348
41
7458
42
7876
42
8393
42
8448
42
8954
42
9218
42
9493
43
10560
43
10604
43
11110
43
11495
43
11737
44
11770
44
12727
44
13002
44
14289
44
14894
45
15642
45
16335
45
17050
45
4875
44
5486
44
6123
45
6422
45
6708
45
7163
45
7358
46
7722
46
8658
46
8684
46
8814
46
9308
47
9919
47
9984
47
10582
47
10894
47
11219
47
12480
48
12532
48
13130
48
13585
48
13871
48
13910
48
15041
49
15366
49
16887
49
17602
49
18486
50
19305
50
20150
50
5625
48
6330
48
7065
49
7410
49
7740
49
8265
50
8490
50
8910
50
9990
50
10020
50
10170
50
10740
51
11445
51
11520
51
12210
51
12570
51
12945
51
14400
52
14460
52
15150
52
15675
52
16005
52
16050
52
17355
53
17730
53
19485
53
20310
53
21330
54
22275
54
23250
54
NC-50
H40
300 / 350 grilles
PERFORMANCE DATA
NC-20
NC-30
Nominal
Duct
Area
( ft2 )
0.25
Core
Area
( ft2 )
Core Velocity
Velocity Pressure
100
0.001
0.003
200
0.002
0.011
300
0.006
0.026
400
0.010
0.045
500
0.016
0.071
600
0.022
0.102
700
0.031
0.139
800
0.040
0.182
900
0.050
0.230
0.19
8x6
0.33
0.26
10x6
0.42
0.34
8x8
0.44
0.37
12x6
0.5
0.41
14x6
0.58
0.48
16x6
12x8
0.67
0.57
10x10
0.69
0.59
18x6
20x6
12x10
0.75
0.63
0.83
0.72
0.92
0.77
1
0.88
1.25
1.11
14x14
36x6
18x12
1.36
1.22
1.5
1.35
22x10
30x8
24x10
42x6
18x14
16x16
1.53
1.37
1.67
1.49
1.75
1.78
1.59
1.62
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
19
26
34
37
41
48
57
59
63
72
77
88
111
122
135
137
149
159
162
182
207
214
229
246
257
275
311
314
322
343
350
-
38
52
68
74
82
96
114
118
126
144
154
176
222
244
270
274
298
318
324
364
414
428
458
492
514
550
622
628
644
686
700
-
57
78
102
111
123
144
171
177
189
216
231
264
333
366
405
411
447
477
486
546
621
642
687
738
771
825
933
942
966
1029
1050
-
76
104
136
148
164
192
228
236
252
288
308
352
444
488
540
548
596
636
648
728
828
856
916
984
10
1028
10
1100
10
1244
10
1256
10
1288
10
1372
10
1400
10
95
10
130
11
170
12
185
12
205
12
240
12
285
13
295
13
315
14
360
14
385
14
440
15
555
15
610
16
675
16
685
16
745
16
795
17
810
17
910
17
1035
18
1070
18
1145
18
1230
18
1285
18
1375
19
1555
19
1570
19
1610
19
1715
19
1750
19
114
18
156
19
204
20
222
20
246
20
288
20
342
21
354
21
378
22
432
22
462
22
528
22
666
22
732
23
810
24
822
24
894
24
954
24
972
24
1092
24
1242
25
1284
25
1374
25
1476
25
1542
25
1650
26
1866
26
1884
26
1932
26
2058
26
2100
26
133
25
182
25
238
26
259
26
287
26
336
26
399
27
413
27
441
28
504
28
539
28
616
28
777
28
854
29
945
29
959
30
1043
30
1113
30
1134
30
1274
30
1449
31
1498
31
1603
31
1722
32
1799
32
1925
32
2177
32
2198
33
2254
33
2401
33
2450
33
152
29
208
30
272
31
296
31
328
32
384
32
456
32
472
32
504
33
576
33
616
34
704
34
888
34
976
34
1080
34
1096
35
1192
35
1272
35
1296
35
1456
35
1656
35
1712
35
1832
35
1968
36
2056
36
2200
37
2488
37
2512
38
2576
38
2744
38
2800
38
171
33
234
35
306
36
333
36
369
36
432
37
513
38
531
38
567
38
648
38
693
38
792
39
999
39
1098
39
1215
39
1233
39
1341
39
1431
39
1458
39
1638
39
1863
40
1926
40
2061
40
2214
39
2313
40
2475
42
2799
42
2826
42
2898
43
3087
43
3150
43
24x12
18x16
18x18
2
1.82
2.25
2.07
24x14
2.33
2.14
30x12
2.5
2.29
24x16
2.67
2.46
20x20
2.78
2.57
36x12
3
2.75
30x16
24x20
3.33
3.11
22x22
42x12
36x14
3.36
3.14
3.5
3.22
24x22
3.67
3.43
30x18
3.75
3.5
H
NC-40
PERFORMANCE DATA
Nominal
Duct
Size
( in. )
6x6
22x6
24x6
12x12
30x6
18x10
355R AND 355F
H41
300 / 350 grilles
PERFORMANCE DATA
PERFORMANCE DATA
H
H42
355R AND 355F
NC-20
Nominal
Duct
Size
( in. )
48x12
24x24
Nominal
Duct
Area
( ft2 )
Core
Area
( ft2 )
4
3.75
36x18
36x20
30x24
4.5
4.22
5
4.71
42x18
5.25
4.94
28x28
42x20
30x28
48x18
36x24
5.44
5.16
5.83
5.51
6
5.66
30x30
42x24
36x28
6.25
5.94
7
6.66
46x22
7.03
6.68
32x32
7.11
6.78
36x30
48x24
36x32
7.5
7.16
8
7.63
34x34
8.03
7.68
36x34
8.5
8.14
42x30
8.75
8.38
36x36
42x34
48x30
9
8.63
10
9.6
38x38
10.03
9.64
42x36
10.5
10.1
46x34
10.86
10.45
42x38
11.08
10.67
40x40
11.11
10.7
48x36
12
11.57
42x42
12.25
11.82
44x44
13.44
12.99
48x42
14
13.54
46x46
14.69
14.22
48x46
15.33
14.85
48x48
16
15.5
NC-30
NC-40
Core Velocity
Velocity Pressure
100
0.001
0.003
200
0.002
0.011
300
0.006
0.026
400
0.010
0.045
500
0.016
0.071
600
0.022
0.102
700
0.031
0.139
800
0.040
0.182
900
0.050
0.230
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
375
422
471
494
516
551
566
594
666
668
678
716
763
768
814
838
863
960
964
1010
1045
1067
1070
1157
1182
1299
1354
1422
1485
1550
-
750
844
942
988
1032
1102
1132
1188
1332
1336
1356
1432
1526
1536
1628
1676
1726
1920
1928
2020
2090
2134
2140
2314
2364
2598
2708
2844
2970
3100
-
1125
1266
1413
1482
1548
1653
1698
1782
1998
2004
2034
2148
2289
2304
2442
2514
2589
2880
2892
3030
3135
3201
3210
3471
3546
3897
4062
4266
4455
4650
-
1500
10
1688
10
1884
11
1976
12
2064
12
2204
12
2264
12
2376
12
2664
13
2672
13
2712
13
2864
14
3052
14
3072
14
3256
14
3352
14
3452
14
3840
14
3856
14
4040
15
4180
15
4268
15
4280
15
4628
15
4728
15
5196
15
5416
16
5688
16
5940
16
6200
16
1875
19
2110
19
2355
19
2470
20
2580
21
2755
21
2830
21
2970
21
3330
22
3340
22
3390
22
3580
23
3815
23
3840
23
4070
23
4190
23
4315
23
4800
23
4820
23
5050
23
5225
23
5335
23
5350
23
5785
23
5910
24
6495
24
6770
24
7110
25
7425
25
7750
25
2250
26
2532
26
2826
27
2964
28
3096
28
3306
28
3396
28
3564
28
3996
29
4008
29
4068
29
4296
30
4578
30
4608
30
4884
30
5028
30
5178
30
5760
30
5784
30
6060
31
6270
31
6402
31
6420
31
6942
31
7092
31
7794
32
8124
32
8532
32
8910
32
9300
32
2625
33
2954
33
3297
33
3458
34
3612
34
3857
34
3962
35
4158
35
4662
35
4676
35
4746
35
5012
36
5341
36
5376
36
5698
36
5866
36
6041
36
6720
36
6748
36
7070
37
7315
37
7469
37
7490
37
8099
37
8274
37
9093
38
9478
38
9954
39
10395
39
10850
39
3000
39
3376
39
3768
38
3952
39
4128
40
4408
40
4528
40
4752
40
5328
40
5344
40
5424
40
5728
41
6104
41
6144
41
6512
41
6704
41
6904
41
7680
41
7712
41
8080
42
8360
42
8536
42
8560
42
9256
42
9456
42
10392
43
10832
43
11376
44
11880
44
12400
44
3375
43
3798
43
4239
43
4446
44
4644
44
4959
44
5094
44
5346
44
5994
45
6012
45
6102
45
6444
46
6867
46
6912
46
7326
46
7542
46
7767
46
8640
46
8676
46
9090
47
9405
47
9603
47
9630
47
10413
47
10638
47
11691
48
12186
48
12798
48
13365
48
13950
48
300 / 350 grilles
PERFORMANCE DATA
NC-10
NC-20
NC-30
Nominal
Duct
Area
( ft2 )
0.25
Core
Area
( ft2 )
Core Velocity
Velocity Pressure
300
0.006
0.013
400
0.010
0.022
500
0.016
0.035
600
0.022
0.050
700
0.031
0.068
800
0.040
0.089
900
0.050
0.113
1000
0.062
0.140
1100
0.075
0.169
0.19
8x6
0.33
0.26
10x6
0.42
0.34
8x8
0.44
0.37
12x6
0.5
0.41
14x6
0.58
0.48
16x6
12x8
0.67
0.57
10x10
0.69
0.59
18x6
20x6
12x10
0.75
0.63
0.83
0.72
22x6
24x6
12x12
30x6
18x10
0.92
0.77
1
0.88
1.25
1.11
14x14
36x6
18x12
1.36
1.22
1.5
1.35
22x10
30x8
24x10
42x6
18x14
16x16
1.53
1.37
1.67
1.49
1.75
1.78
1.59
1.62
24x12
18x16
18x18
2
1.82
2.25
2.07
24x14
2.33
2.14
30x12
2.5
2.29
24x16
2.67
2.46
20x20
2.78
2.57
36x12
3
2.75
30x16
24x20
3.33
3.11
22x22
42x12
36x14
3.36
3.14
3.5
3.22
24x22
3.67
3.43
30x18
3.75
3.5
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
57
78
102
111
123
144
171
177
189
216
231
264
333
366
405
411
447
477
486
546
621
642
687
738
771
825
933
942
966
1029
1050
-
76
104
136
148
164
192
228
236
252
288
308
352
444
488
540
548
596
636
11
648
11
728
11
828
12
856
12
916
12
984
13
1028
13
1100
13
1244
14
1256
14
1288
14
1372
14
1400
14
95
130
170
185
205
11
240
11
285
12
295
12
315
12
360
13
385
13
440
14
555
15
610
15
675
16
685
16
745
16
795
17
810
17
910
17
1035
18
1070
18
1145
18
1230
18
1285
19
1375
19
1555
19
1570
19
1610
20
1715
20
1750
20
114
12
156
13
204
15
222
15
246
15
288
16
342
17
354
17
378
17
432
18
462
18
528
19
666
20
732
20
810
21
822
21
894
21
954
21
972
21
1092
22
1242
22
1284
23
1374
23
1476
23
1542
23
1650
24
1866
24
1884
24
1932
24
2058
25
2100
25
133
16
182
17
238
19
259
19
287
19
336
20
399
21
413
21
441
21
504
22
539
22
616
23
777
24
854
24
945
25
959
25
1043
25
1113
25
1134
25
1274
26
1449
26
1498
27
1603
27
1722
27
1799
27
1925
28
2177
28
2198
28
2254
28
2401
29
2450
29
152
20
208
21
272
22
296
23
328
23
384
24
456
24
472
25
504
25
576
25
616
26
704
26
888
27
976
28
1080
28
1096
28
1192
29
1272
29
1296
29
1456
29
1656
30
1712
30
1832
30
1968
31
2056
31
2200
31
2488
32
2512
32
2576
32
2744
32
2800
32
171
23
234
24
306
24
333
26
369
26
432
27
513
27
531
28
567
28
648
29
693
29
792
29
999
30
1098
31
1215
31
1233
31
1341
32
1431
32
1458
32
1638
33
1863
33
1926
33
2061
34
2214
34
2313
34
2475
34
2799
35
2826
35
2898
35
3087
35
3150
35
190
25
260
27
340
28
370
28
410
29
480
30
570
30
590
30
630
31
720
31
770
32
880
32
1110
33
1220
34
1350
34
1370
34
1490
34
1590
35
1620
35
1820
35
2070
36
2140
36
2290
36
2460
37
2570
37
2750
37
3110
38
3140
38
3220
38
3430
38
3500
38
209
28
286
29
374
31
407
31
451
31
528
32
627
33
649
33
693
33
792
34
847
34
968
35
1221
36
1342
36
1485
37
1507
37
1639
37
1749
37
1782
37
2002
38
2277
38
2354
39
2519
39
2706
39
2827
39
3025
40
3421
40
3454
40
3542
40
3773
41
3850
41
H
PERFORMANCE DATA
Nominal
Duct
Size
( in. )
6x6
355ZR AND 355ZF
NC-40
measured per ANSI/ASHRAE Standard 70-2006.
measured per ANSI/ASHRAE Standard 70-2006.
H43
300 / 350 grilles
PERFORMANCE DATA
PERFORMANCE DATA
H
H44
355ZR AND 355ZF
NC-10
Nominal
Duct
Size
( in. )
Nominal
Duct
Area
( ft2 )
Core
Area
( ft2 )
42x18
5.25
4.94
28x28
42x20
30x28
48x18
36x24
5.44
5.16
5.83
5.51
6
5.66
30x30
42x24
36x28
6.25
5.94
7
6.66
46x22
7.03
6.68
32x32
7.11
6.78
36x30
48x24
36x32
7.5
7.16
8
7.63
34x34
8.03
7.68
36x34
8.5
8.14
42x30
8.75
8.38
36x36
42x34
48x30
9
8.63
10
9.6
38x38
10.03
9.64
42x36
10.5
10.1
46x34
10.86
10.45
42x38
11.08
10.67
40x40
11.11
10.7
48x36
12
11.57
42x42
12.25
11.82
44x44
13.44
12.99
48x42
14
13.54
46x46
14.69
14.22
48x46
15.33
14.85
48x48
16
15.5
NC-20
NC-30
NC-40
Core Velocity
Velocity Pressure
300
0.006
0.013
400
0.010
0.022
500
0.016
0.035
600
0.022
0.050
700
0.031
0.068
800
0.040
0.089
900
0.050
0.113
1000
0.062
0.140
1100
0.075
0.169
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
Airflow, cfm
NC
1482
1548
1653
1698
1782
1998
2004
2034
2148
2289
2304
2442
2514
2589
2880
11
2892
11
3030
11
3135
11
3201
11
3210
11
3471
12
3546
12
3897
12
4062
12
4266
13
4455
13
4650
13
1976
16
2064
16
2204
16
2264
16
2376
16
2664
17
2672
17
2712
17
2864
17
3052
17
3072
18
3256
18
3352
18
3452
18
3840
18
3856
18
4040
19
4180
19
4268
19
4280
19
4628
19
4728
19
5196
20
5416
20
5688
20
5940
20
6200
21
2470
21
2580
22
2755
22
2830
22
2970
22
3330
23
3340
23
3390
23
3580
23
3815
23
3840
23
4070
24
4190
24
4315
24
4800
24
4820
24
5050
25
5225
25
5335
25
5350
25
5785
25
5910
25
6495
26
6770
26
7110
26
7425
26
7750
26
2964
26
3096
26
3306
27
3396
27
3564
27
3996
28
4008
28
4068
28
4296
28
4578
28
4608
28
4884
28
5028
29
5178
29
5760
29
5784
29
6060
29
6270
29
6402
30
6420
30
6942
30
7092
30
7794
30
8124
31
8532
31
8910
31
9300
31
3458
30
3612
30
3857
31
3962
31
4158
31
4662
32
4676
32
4746
32
5012
32
5341
32
5376
32
5698
32
5866
33
6041
33
6720
33
6748
33
7070
33
7315
34
7469
34
7490
34
8099
34
8274
34
9093
34
9478
35
9954
35
10395
35
10850
35
3952
34
4128
34
4408
34
4528
34
4752
35
5328
35
5344
35
5424
35
5728
35
6104
36
6144
36
6512
36
6704
36
6904
36
7680
37
7712
37
8080
37
8360
37
8536
37
8560
37
9256
37
9456
38
10392
38
10832
38
11376
38
11880
39
12400
39
4446
37
4644
37
4959
37
5094
37
5346
38
5994
38
6012
38
6102
38
6444
38
6867
39
6912
39
7326
39
7542
39
7767
39
8640
40
8676
40
9090
40
9405
40
9603
40
9630
40
10413
41
10638
41
11691
41
12186
41
12798
41
13365
42
13950
42
4940
40
5160
40
5510
40
5660
40
5940
40
6660
41
6680
41
6780
41
7160
41
7630
42
7680
42
8140
42
8380
42
8630
42
9600
43
9640
43
10100
43
10450
43
10670
43
10700
43
11570
43
11820
43
12990
44
13540
44
14220
44
14850
44
15500
45
5434
42
5676
42
6061
43
6226
43
6534
43
7326
43
7348
43
7458
44
7876
44
8393
44
8448
44
8954
44
9218
44
9493
45
10560
45
10604
45
11110
45
11495
45
11737
45
11770
45
12727
46
13002
46
14289
46
14894
47
15642
47
16335
47
17050
47
300 / 350 grilles
Filter Return Grilles
Steel, Aluminum and Stainless Steel
Available Steel Models:
¾” Spacing
350RLF1 / 1” Filter
350RSF1 / 1” Filter
350RLF1 / 350RLF2 - Border Type 1(Surface Mount) & Border Type 3 (Lay-in T-Bar)
FASTENER
7/16”
½” Spacing
Please refer to page I85 for Hinge Locations
1 1/4”
2" FOR 1" FILTER
3 1/8" FOR 2" FILTER
NOMINAL DUCT SIZE (D)
D PLUS 1/4"
Available sizes (D” x D”) are 10 x 8 inches through 48 x 36 inches in 1” increments.
Odd sizes are available at additional cost. D PLUS 3 3/4"
H
FILTER RETURN GRILLES
½” Spacing
355FLF1 / 1” Filter
355FSF1 / 1” Filter
Available 304 Stainless Steel Models:
¾” Spacing
350RLF1-SS / 1” Filter
350RSF1-SS / 1” Filter
350RLF2-SS / 2” Filter
350RSF2-SS / 2” Filter
Products Include:
• 35° Fixed Deflection - Steel
and Aluminum
• 45° Fixed Deflection - Stainless Steel
• ¼-Turn Fastener
• 1- or 2” Filter Frame.
#1 - Surface Mount
#3 - Lay-In
• Standard Finish - #26 White
(Steel and Aluminum Models)
• Standard FInish - #04 Mill
(Stainless Steel Models)
3/4”
D PLUS 3 3/4"
Available Aluminum Models:
¾” Spacing
HINGE
D PLUS 3 3/4"
350 / 355 (RLF-RSF / FLF-FSF / -SS)
H45
300 / 350 grilles
Options and Accessories
H
Model
Number
301
300
301
300
301
300
301HD
300HD
301HD
300HD
Type
Grille
Stl.-Supply
Stl.-Supply
Al.-Supply
Al.-Supply
SS-Supply
SS-Supply
Stl.-Supply
Stl.-Supply
SS-Supply
SS-Supply
Type
Deflection
Single
Double
Single
Double
Single
Double
Single
Double
Single
Double
Deflection
Degrees
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Blade
Spacing
Model
Number
350
350
350
355
355
350RF
350RF
350FF
350FF
350RF
350
355
350RF
350RF
350
355
350FF
350FF
350
355
350
355
350
355
350
355
AG-15
AG-15-AA
AG-15-SS
Type
Grille
Stl.-Return
Al.-Return
SS-Return
Stl.-Return
Al.-Return
Stl. Filter Return
Stl. Filter Return
Al-Filter Return
Al-Filter Return
SS Filter Return
Stl.-Return
Stl.-Return
Stl. Filter Return
Stl. Filter Return
Al.-Return
Al.-Return
Al-Filter Return
Al-Filter Return
Stl.-Return
Stl.-Return
Al.-Return
Al.-Return
Stl.-Return
Stl.-Return
Al.-Return
Al.-Return
Stl.-Damper
Al.-Damper
SS.-Damper
Type
Deflection
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
-------
Deflection
Degrees
0/35
0/35
0/45
0/35
0/35
35
35
35
35
45
0/35
0/35
35
35
0/35
0/35
35
35
0/35
0/35
0/35
0/35
0/35
0/35
0/35
0/35
-------
Blade
Spacing
¾”
¾”
¾”
¾”
¾”
¾”
½”
½”
½”
½”
¾”
¾”
¾”
½”
½”
¾”
½”
¾”
½”
¾”
¾”
½”
¾”
½”
¾”
½”
¾”
½”
¾”
½”
¾”
½”
¾”
½”
¾”
½”
-------
Border
Type
1
1
1
1
1
1
1
1
1
1
OS FR #01 #04 #20 #21 #26 #84
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y N Y N N Y N
Y
Y N Y N N Y N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
C
Y
Y
Y
Y
N
N
N
N
N
N
DS
Y
Y
Y
Y
N
N
N
N
N
N
IS
Y
Y
Y
Y
N
N
N
N
N
N
FG
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
PF
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
PFAP
N
N
N
N
N
N
N
N
N
N
Border
Type
1
1
1
1
1
1
1
1
1
1
3
3
3
3
3
3
3
3
2
2
2
2
4
4
4
4
-------
OS FR #01 #04 #20 #21 #26 #84 C
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y N Y N N Y N N
Y
Y
Y
Y
Y
Y
Y
Y N
Y
Y
Y
Y
Y
Y
Y
Y N
N N Y
Y
Y
Y
Y
Y
Y
N N Y
Y
Y
Y
Y
Y
Y
N N Y
Y
Y
Y
Y
Y
Y
N N Y
Y
Y
Y
Y
Y
Y
N N N Y N N Y N N
N Y
Y
Y
Y
Y
Y
Y N
N Y
Y
Y
Y
Y
Y
Y N
N N Y
Y
Y
Y
Y
Y
Y
N N Y
Y
Y
Y
Y
Y
Y
N Y
Y
Y
Y
Y
Y
Y N
N Y
Y
Y
Y
Y
Y
Y N
N N Y
Y
Y
Y
Y
Y
Y
N N Y
Y
Y
Y
Y
Y
Y
N Y
Y
Y
Y
Y
Y
Y N
N Y
Y
Y
Y
Y
Y
Y N
N Y
Y
Y
Y
Y
Y
Y N
N Y
Y
Y
Y
Y
Y
Y N
N Y
Y
Y
Y
Y
Y
Y N
N Y
Y
Y
Y
Y
Y
Y N
N Y
Y
Y
Y
Y
Y
Y N
N Y
Y
Y
Y
Y
Y
Y N
Y
Y N Y N N Y
Y --Y
Y N Y N N Y
Y --Y
Y N Y N N N N ---
DS
Y
Y
N
Y
Y
N
N
N
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
-------
IS
Y
Y
N
Y
Y
N
N
N
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
-------
FG
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
-------
PF
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
-------
PFAP EQT
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
-------------
EQT
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
OPTIONS & ACCESSORIES
Caution: All options are not available in all combinations. Check with your Titus representative for details.
Titus reserves the right to discontinue or add options at any time without notice.
H46
SERIES FINISHES, OPTIONS AND ACCESSORIES
Finishes:
#01 Aluminum Colored Paint
#04 Mill Finish
#20 Envirotherm Color To Match Sample*
#21 Envirothane Color To Match Sample*
#25 Off White*
#26 White (standard on most models)
#84Black*
Note: An asterisk (*) indicates additional cost
Concealed mounting not available with damper
Options & Accessories:
OS Oversize
FR
Fractional Size
C
Concealed Fasteners
DS
Debris Screen ¼” Square Mesh
Galvanized Steel Screen
IS
Insect Screen 1/16” Square Mesh
Galvanized Steel Screen
FG
Foam Gasket On Back Side of Border
PF
Steel Plaster Frame
PFA
Aluminum Plaster Frame
PF-SS
Stainless Steel Plaster Frame
EQT
Earthquake Tab For Safety Wiring
to Support Structure
300 / 350 grilles
Options and Accessories (continued)
BORDER TYPES
Snap-In
BORDER TYPE 2
SNAP-IN (PANEL MOUNTED)
Available Module Size
24 x 24 inches
BORDER TYPE 3
LAY-IN (PANEL MOUNTED)
Available Module Sizes
12 x 12 inches
24 x 12 inches
36 x 12 inches
48 x 12 inches
24 x 24 inches
36 x 24 inches
48 x 24 inches
13/16"
Ceiling Module Size
minus 1/16"
Note: Maximum grille area is module size minus 4 inches
Lay-In (Panel Mounted)
BORDER TYPE 4
SPLINE (PANEL MOUNTED)
24 x 24 inches
Ceiling Module Size
minus ¼"
BORDER TYPE NT
NARROW TEE (PANEL MOUNTED)
24 x 12 inches
24 x 24 inches
H
Spline (Panel Mounted)
Note: Filter grilles not available in all module
sizes
⅜"
ACCESSORIES
TYPE A FASTENING - SURFACE MOUNT
• Standard For All Border Type
1 Surface Mount Grilles
• Note: For screw hole locations see the
chart, “Screw Hole Location Chart”
⅜"
Ceiling Module Size
minus ¾"
NARROW TEE
Narrow Tee (Panel Mounted)
3
• Available on Most Models
with Border Type 1
16 "
5
16 "
Ceiling Module Minus 3/4"
Type A - External Screw
Type C - Concealed Screw
Existing Duct
1¼" x ¾" Angle Clip
(by others)
#8 Screw
(by others)
OPTIONS & ACCESSORIES
TYPE C FASTENING CONCEALED MOUNTING
Ceiling or Wall
1¼" x ¾" Angle Clip
Attached to Grille
(by Titus)
Flange or Grille
H47
300 / 350 grilles
Oversize Grille Construction
Joining With Aluminum Mullions or Alignment Tabs
Notes:
• Detail A-A is used for vertical joints. The frames of both vertical sides of the joint are sheared
and then butted together. Alignment tabs serve to keep the face surfaces parallel.
• Detail B-BAis used for horizontal B
joining. Horizontal frames are installed
C full
A A
A A
A
width with an aluminum mullion in betweenA each
frame.
• This page does not apply to filter grilles.
• This page is for Border Type 1 grilles only.
8"-48" Wide
49"-96" Wide
D
97"-144" Wide
E
97"-144" Wide and
49"-96" High
49"-96" Wide and
49"-96" High
F
G
A
A
A
A
B
A A
A A
B
H
300/350 SERIES
FOR DUCTS OR OPENINGS LARGER THAN 48 INCHES
H48
6-48" Wide and
49"-96" High
A A
OVERSIZE GRILLE CONSTRUCTION
.750
2.750
Frame
.375
234"
Frame
5
Alignment
Tab
6-48" Wide and
97"-144" High
Frame
Frame
DETAIL A-A
1
4"
BB Mullion
DETAIL B-B
DETAIL B-B
16 "
300 / 350 grilles
Screw Hole Location Chart
A
For use with 300/350 Grilles up to 48” x 36”
(not for use with filter grilles)
A
HOW TO USE THESE CHARTS
1.Determine desired grille size
2.Find the grille size in Grille
Size Chart
3.Use the Grille Size Chart to select the proper
diagram number. The number corresponds
to the diagrams in the Screw Hole Layout
Diagrams 1-14.
Grille Size Chart
A
A
C
B
STEEL FRAME
Frame
Width
A
B
C
ALUMINUM FRAME
½
¾
1
11⁄8
.25
.34
.44
.5
.44
-
1.25 and
Greater
.63
H
Screw Layout Diagrams 1 - 14
Note 2: All holes are located 5/8” from outside edge. Location of hole according to number required. (One Hole) Located midway between ends. (Two
Holes) Locate each hole 3 inches from each end. (Three Holes) Locate one hole 3 inches from each end and center the third hole.
SCREW HOLE LOCATION CHART
Note 1: This chart provides general information concerning location of screw holes. Screw hole location is subject to change without notice. Titus
does not recommend pre-drilling mounting surfaces for screws. Use the grille as a template. This chart applies to border type 1 only.
H49
Notes
300 / 350 grilles

300 / 350 grilles

Transcription

Similar documents

aeroblade grilles

our catalog

January 8, 1968 - City of Surrey

specialized grilles

ALBANY ATLANTA AUGUSTA MACON SAVANNAH

pdf brochure - Polar Trailer