Steampunk Ensemble pattern Notes:

Steampunk Ensemble pattern
Notes:
•
•
•
•
•
•
•
Seam allowances are ¼” unless otherwise specified.
Print the patterns with no scaling. There is a mark on each page showing an inch. Match that to a
ruler and make sure it’s correct.
Skirt patterns is designed to close flush in the back, so appropriate closures would be Velcro, buttons
with loops or hooks and eyes. Corset pattern has an overlap, or you can eliminate ¼” from each side of
the back piece to lace up with eyelets.
Check my blog for more free patterns here: http://jenwrenne.wordpress.com
This pattern is copyrighted by me and may not be shared or sold. If you sell things made from this
pattern I would appreciate credit for the pattern design.
Line up the jacket pattern pieces on the red line and tape before cutting
This was designed on my MIM. Based on online measurements (that I have not verified), her
measurements are similar to other immature-torso BJDs like Kaye Wiggs Nyssa and Bobobie Sprite.
This chart can help you adapt the pattern to other dolls (my measurements):
bust
16" MIM
14" Kish
Chrysalis
14" Rosette
14" Betsy
McCall
waist
inseam
arm
7
6.25
6.5
5.25
btwn
should
2.5
7
7.25
6.375
6.75
5.625
5
4.5
4.5
2.5
2.5
6.75
5.875
5
4
2.125
neckwaist
3.375
head
Height
7.25
16
3
3
7
9
14
14
2.75
8.5
14
Prior sewing knowledge is assumed, but if you need help please email me:
[email protected]
Skirt measurements:
•
•
•
Pleated ruffle is 45” x 3” (fold and pleat following picture - you may have extra)
Skirt is 8.5”x14” (shorten by 1” for Kish)
Waistband is 7.25”x 1.25”
Sew side and shoulder seams of main and lining.
Sew together where you see in white:
Clip, turn, press
Sew lace to sleeves and gather top edge
Set in sleeves
Sew side seams and serge/zigzag
Use a ruffle or a chopstick and make pleats
Cut to fit skirt and attach
Gather to waistband
Sew corset pieces and lining together, sew around outer edge
Leave opening to turn
Corset pieces – cut 2 main and 2 lining
except center front cut 1 on fold of main
and lining