PRO-CUT ADAPTER GUIDE STANDARD CAR/SUV/PICKUP ADAPTERS FAX TO: Perfect Brake Job. Every time.

Transcription

PRO-CUT ADAPTER GUIDE STANDARD CAR/SUV/PICKUP ADAPTERS FAX TO: Perfect Brake Job. Every time.
Total # of pages:
FAX TO: 603.298.8404
Perfect Brake Job. Every time.
PRO-CUT ADAPTER GUIDE
PFM-2: BASIC PACKAGE
PFM-5: MASTER PACKAGE
PFM-7: HD TRUCK PACKAGE
STANDARD CAR/SUV/PICKUP ADAPTERS
50-687
50-687
4-Hole Adapter — Fits most 4-lug vehicles.
50-688
5-Hole Adapter — Fits most 5-lug vehicles.
50-695
Small Truck/Larger Car Adapter — Fits many smaller trucks and SUVs
50-688
such as the Dakota and Envoy and also larger cars such as the Chrysler 300 and
Buick LeSabre.
50-691
1/2-Ton Truck Adapter/Common — Fits most pickups and sport utility
vehicles in the 1/2-ton range including Ford F150 up to and including 2003.
50-699
Tall Hub Truck Adapter — Primarily designed to fit the 2003+ Expedition
and 2004+ F150, this adapter shares patterns with other common trucks that
have tall hubs which may interfere with the 50-691 adapter.
50-695
50-691
50-699
STANDARD HEAVY DUTY TRUCK ADAPTERS
50-935
50-935
Dual Wheel Adapter/Common — Fits most dual-wheel vehicles
front and rear.
50-683
50-683
Heavy Duty Truck Adapter (8 & 10 Lug) — Fits 3/4- and 1-ton
Ford, Dodge, and Chevy trucks and vans.
SPECIALTY ADAPTERS
50-696
Rover Adapter — Fits Land Rovers and Range Rovers.
50-681
1/2-Ton Truck Adapter/Alternate — Fits most pickups and sport
50-696
utility vehicles including the Toyota Land Cruiser/VW Touareg (does NOT
have common Ford pattern).
50-939
50-681
Dual Wheel Box Truck Adapter for Mitsubishi/Isuzu and others
50-939
Has 5 on 208 and 6 on 222 bolt patterns.
DUAL WHEEL REAR EXTENSIONS
50-495K
Extension Kit — for flat slide plates 50-498 and 50-499 only — Allows cutting head to reach rotor
in high offset situations like Ford F450 & F550. Includes three sets of adapter standoffs for all Ford
trucks. May require the use of an extended lead screw. Kit includes Extended Plate, and 50-005, 50-007,
and 50-009 Stand Offs.
50-492K
Extension Kit — for 50-496 (Speed-Lock) slide plate only — Allows cutting head to reach rotor in
50-495K
high offset situations like Ford F450 & F550. Includes three sets of adapter standoffs for all Ford trucks.
May require the use of an extended lead screw. Kit includes Extended Plate, and 50-005, 50-007, and
50-009 Stand Offs. (Image not shown.)
50-006
50-006
GM 3500HD Stand Offs to extend the dual wheel adapter over rear hubs. May require the use of
extension plate (call factory or local rep for details and other part numbers required).
50-035
50-035
Extended Lead Screw — Required for use on rear rotors larger than 15.25” — some F550s, for
example. For lathes with 50-498 or 50-496 slide plates only.
800.543.6618
[email protected]
10 Technology Drive, #4 West Lebanon, NH 03784 USA
www.procutusa.com
603.298.5200 fax: 603.298.8404