Document 6458799
Transcription
Document 6458799
Bianco Avorio Bianco_GR Grigio chiaro Grigio medio PANNA_C (OPALE) PANNA_GR (DAKOTA) GRIGIO CHIARO_C (OSSIDIANA) GRIGIO CHIARO_GR (SERIZZO) GRIGIO MEDIO_C (FUMO) GRIGIO MEDIO_GR (MALAGA) Grigio Ardesia Rosso A_Acciaio ACCIAIO_C A_Cemento CEMENTO_C Arancio Blu IntensE A_Ardesia A_Nero Sabbia GRIGIO CHIARO_N GRIGIO MEDIO_K GRIGIO MEDIO_N 4”x12” Matte GRIgio_C fumo_C GRIGIO SCURO_N ANTRACITE_GR (SPECIAL ANTRACITE) Color Name agata_C ANTRACITE_K NERO_N NERO_C NERO_C ametista_C ZOLFO_C ocra_C A_Giallo MJ7Y ULFD MI0X MJ9Q ULFG Avorio_C KYWT MJ7X ULFA Bianco_C KYWP MJ7U ULF6 Cemento_C KYWS MJ7V ULF9 Cobalto_C MI0Y MJ9N ULFK Creta_C MI0U MJ8B ULFB Fumo_C MI0R Grigio_C MI0Q Nero_C KYWQ S ULF8 ULF7 MJ7W ULFL ULFE Ocra_C MI0V MJ8S Pistacchio_C MJ09 MJ9B ULFJ Rosso_C MI0W MJ9P ULFF Tortora_C MI0T MJ7Z ULFC Turchese_C MI0Z MJ9M ULFH ASTM Test Results Technical Characteristics cobalto_C A_Blu BLU_K creta_C A_Creta VERDE_GR (MARINA) ASTM Standards ASTM Test Results Matte 7.0 % to 20% 7.5 % Frost Resistance As Reported Not Resistant Scratch Resistance MOHS 1-10 5.5 ASTM Test Methods C 373 C 1026 Breaking Strength ≥125 lbf. ≥ 185 lbf. C 648 -2.0% < Nominal ≤ 2.0% Within Standard C 499 ≤ 0.03 in (0.79 mm max) Within Standard C 499 ≤ 0.40% or +/- 1.3 mm** -0.3% < Any Edge ≤ 0.4% or - 1.0 mm/ 1.3 mm** Class 0 - Class V Within Standard C 502 Nominal Thickness Sizes Wall Tile Dimensional Insert Bullnose 4” x 12” 4” x 12” 4” x 12” Pcs Sq. Ft. Weight (lbs.) Thickness 36 29 20 11.63 9.36 37 30 21 7.5 mm 7.5 mm Compatible MOHS Scale Facial Dimension Wedging (squareness) Within Standard C 485 Class II* C 1027 Dry Coefficient of Friction As Reported N/A C 1028 Wet Coefficient of Friction As Reported N/A C 1028 Chemical Resistance Class A - Class E Class B C 650 Stain Resistance Class A - Class E Class A C 1378 Sizes Wall Tile 4” x 12” Fango Argilla A_Sabbia PANNA_C (OPALE) SABBIA_GR (AMARELO) Sabbia_K SABBIA_N A_Tortora TORTORA_C TORTORA_GR TORTORA_K TORTORA_N A_Fango FANGO_C COTTO_C (TABACCO) Cotto Marrone FANGO_N A_Marrone MARRONE_C (DIASPRO) COTTO_GR (CAPAO) Weight (lbs.) 767.58 2508 Wall Tile SISTEMC Citta is available nationwide. To locate your nearest Distributor call Marazzi Architectural Customer Service or visit www.marazziarchitectural.com pistacchio_C A_Argilla Sq. Ft. 66 * Abrasion Resistance / Suggested Applications Class II Tile in this class may withstand soft-soled and some normal foot traffic provided the dirt and/or other abrasives are kept to a minimum. Class II tile should not be used in areas with direct access to the outside, large amounts of foot traffic, or areas exposed to abnormal footwear. ** Whichever is less *** Wet C.O.F. less than 0.60. Check local bulding codes for C.O.F. compliance prior to installation. DISTRIBUTED BY: Tortora Ctn turchese_C A_Verde tortora_C Decorative Tile Trim Available 0 II 20% American Marazzi Tile, Inc. Telephone Headquarters & 800.820.8453 Manufacturing Plant Fax 972.226.5629 359 Clay Road marazziarchitectural.com Sunnyvale, Texas 75182 [email protected] Very Uniform Variation Glazed Ceramic Wall Tile Abrasion Resistance 20% Pre-Consumer Recycled Content VOC No VOC Color and other aesthetic features shown are as close as the limitation of the printing process will allow. We have tried to make this brochure as comprehensive and factual as possible. We reserve the right, however, to make changes at any time, without notice, in colors, materials, packaging, specifications and availability. Since some information may have been updated since time of printing, please check with Marazzi Architectural Customer Service for details. © 10.12 American Marazzi Tile, Inc. Z814 SistemC Citta S O L U T I O N S CITTÁ 4”x12” Bullnose KYWR Abrasion Resistance VERDE_C (SMERALDO) 4”x12” Dimensional Insert Ametista_C Warpage Edge (flatness) A_Arancio BLU_GR T I L E TRIMS* Agata_C Water Absorption rosso_C BLU_C DECOS * Available in Matte finish, used for all finishes ** Due to size fluctuation, all measurements given are nominal. Where strict accuracy is required, please refer to actual tile samples. A_Rosso Verde Verde intensE AVORIO_C ARDESIA_C ANTRACITE_C (LAVAGNA) Blu Creta WALL TILE** A_Grigio Zolfo Giallo bianco_C Cemento_C Antracite Nero BIANCO_N PANNA_K (CORAL) GRIGIO SCURO_GR (EMERALD) Grigio scuro Cemento Bianco_K A_Avorio Panna Acciaio wall tile BIANCO PURO_N Bianco Special_C A_Bianco code sizes Kaleidos Brochure 2.5K - please recycle. O L R O Bianco special Graniti C Cromie Contributes to LEED Credits K Glazed Ceramic Wall Tile color palette surface options Finishes decorative options Matte color shades matte dimensional insert Sizes 4”x12” Trims Bullnose CITTA’s expansive color spectrum ranges from the quietest of neutrals to very vibrant primaries, setting the stage for all-out personalized interior walls. The streamlined narrow rectangle shape immediately attracts attention as a wallscape material that is outside the norm. This exciting new format is such a welcome deviation from smaller, mundane wall tile sizes and shapes. The array of 15 colors contained in CITTA’s matte palette integrates smoothly with other elements in the Marazzi Architectural program, facilitating high levels of design flexibility. All feature accompanying bull nose trim, plus 13 are also available in threedimensional decorative inserts that can either stand-alone or integrate with field tile to generate eye-catching patterns. Matte CITTA can instantly revitalize a reception area wall, bar backsplash, dining area fireplace or tub and spa surround. Use it as the Agata_C Ametista_C Avorio_C Bianco_C Cemento_C Cobalto_C Creta_C Fumo_C Grigio_C Nero_C Ocra_C Pistacchio_C Rosso_C Tortora_C Turchese_C Dimensional Insert single tile element in a room or, better yet, in correlation with compatible Marazzi Architectural porcelain collections to maximize the benefits of low life cycle cost, ease of maintenance, sustainable contributions and intelligent design. Rosso_C 4”x12” Dimensional Insert