Deep Treatment Hair Mask Trade Name Weight % Function

Deep Treatment Hair Mask
CD-0045(LA)
This hair mask is suitable for consumers who want a deep conditioning treatment without too much effort at home. Chemidex™* S surfactant and Merquat™* 2001
polymer provide conditioning for dry and wet combing properties. Schercemol™* SHS, DIA, and CATC esters form an emollient cascade to deliver smoothness,
shine and easy spreadability – without a heavy or greasy effect. Glucam™* P-20 humectant is used as a humectant as well as a fragrance fixative.
INCI Name, Trade Name
A.
:
B.
C.
Weight %
Function
Appearance
White viscous cream
pH
4.0 – 4.5
Viscosity (mPa·s)**
28,000 – 34,000
Yield Value (dyn/cm²)
500 - 800
1.
Deionized Water
2.
Stearamidopropyl Dimethylamine,
Chemidex™* S Surfactant
0.70
3.
Lactic Acid (85% solution)
0.35
Acidifier
4.
Polyquaternium-47 (20% wt TS),
Merquat™* 2001 Polymer
1.00
Conditioner
Stability: Passed 3 months @ RT & 45°C, Passed 5 cycles
freeze/thaw.
5.
Cetrimonium Chloride (50% wt),
Genamin® CTAC
1.00
Conditioner/
Emulsifier
**Brookfield RV Viscometer spindle #E95 @ 20 rpm, 25°C @ 24 hours
6.
Cetearyl Alcohol,
Lipocol® CS 30:70
5.00
Thickener
7.
Isostearyl Hydroxystearate,
Schercemol™* SHS Ester
2.00
Emollient
8.
Diisopropyl Adipate,
Schercemol™* DIA Ester
1.00
Emollient
9.
PPG-20 Methyl Glucose Ether,
Glucam™* P-20 Humectant
0.70
Humectant
10.
Cocoyl Adipic Acid/ Trimethylolpropane Copolymer,
Schercemol™* CATC Ester
1.00
Emollient
11.
Butyrospermum Parkii (Shea) Butter,
Unibase Karité
1.00
Emollient
12.
Methylchloroisothiazolinone (and)
Methylisothiazolinone,
Euxyl® K 120
0.10
Preservative
13.
Fragrance,
FAV 129466
0.40
Fragrance
85.75
Diluent
Product Properties:
Conditioner
Supplier References:
Lubrizol Advanced Materials, Inc. (2, 4, 7, 8, 9, 10)
Clariant Corporation (5)
Lipo do Brasil (6)
ChemyUnion Quimica Ltda (11)
Schülke & Mayr (12)
FAV 105 (13)
Procedure:
1.
PART A: In a suitable mixing vessel add ingredients 1-4 and heat to 75°C. Mix until
homogeneous and clear.
2.
Add ingredient 5 and mix until uniform.
3.
PART B: In a separate vessel, combine PART B ingredients. Heat to 75°C.
4.
When uniform, add PART B to PART A with mixing. Mix until uniform (~10-15 minutes)
maintaining temperature at 60°C.
5.
Begin cooling the batch with mixing.
6.
PART C: When batch < 40°C, add ingredients 12-13, one at a time with gentle mixing.
Make sure that batch is uniform before each ingredient is added. Mix until uniform.
CD-0045(LA)
Edition: November 5, 2013
Previous Edition: May 13, 2013
Reference #: CD-204113 (ERNV)
Original Edition: April 21, 2013
Lubrizol Advanced Materials, Inc. / 9911 Brecksville Road, Cleveland, Ohio 44141-3247 / TEL: 800.379.5389 or 216.447.5000
The information contained herein is being furnished for
informational purposes only, upon the express condition
that the User makes its own assessment of the appropriate
use of such information. While the information contained
herein is believed to be reliable, no representations,
guarantees or warranties of any kind are made as to its
accuracy, suitability for a particular application or the
results to be obtained herefrom. Lubrizol Advanced
Materials, Inc. ("Lubrizol") cannot guarantee how any
products associated with this information will perform
in combination with other substances or in User’s
process. Due to the variations in methods, conditions
and equipment used commercially in processing these
materials, no warranties or guarantees are made as to
the suitability of the information/products for the
applications disclosed. Lubrizol shall not be liable and
the User assumes all risk and responsibility for, any use
or handling of any material beyond Lubrizol's direct
control. LUBRIZOL MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY
OR
FITNESS
FOR
A
PARTICULAR PURPOSE. It is the User’s sole
responsibility to determine if there are any issues
relating to patent infringement of any component or
combination of components relating to the supplied
information. Nothing contained herein is to be
considered as permission, recommendation, nor as
an inducement to practice any patented invention
without the permission of the patent owner.
For further information, please visit: www.lubrizol.com/personalcare
Lubrizol Advanced Materials, Inc. is a wholly owned subsidiary of The Lubrizol Corporation
*Trademark owned by The Lubrizol Corporation
© Copyright 2013 / The Lubrizol Corporation