Armstrong Medintech

Armstrong
Product: Medintech Sheet Vinyl
And
Armstrong S-599 Adhesive
MEDINTONE ™ | MEDINTECH ® | MEDLEY ™
Homogeneous Sheet
The Armstrong line of Homogeneous sheet flooring provides many different color and visual options. Medintone features CONTINUUM™,
a simple, organized tonal step system that cross-coordinates with MARMORETTE™ linoleum and Stonetex® VCT. It has a sophisticated,
natural appearance with a complete range of colors and neutrals. Medintech provides a jasped visual in neutrals and soft colors.
Medley presents a contrasting chip visuals designed for superior hiding power from dirt and subfloor imperfections. All three products
have a UV-cured urethane coating that protects the floor’s appearance and allows for low maintenance options. Perfect for aseptic areas,
Medintone, Medintech, and Medley can all be heat welded and flash-coved for spaces demanding superior infection control.
PRODUCT INFORMATION
Construction
Homogeneous
Product Line
Medintone | Medintech | Medley
International Product
Specifications
ASTM F 1913, ISO 10581, Type II
Overall Thickness
0.080 in. (2.0 mm)
Wear Layer Thickness
0.080 in. (2.0 mm)
Finish
UV-cured Polyurethane
Installation
Full Spread Adhesives – S-599 Premium, S-543 High-Moisture, S-240 Epoxy
Seaming Options
Heat Weld with patterned (Medintone, Medintech) or solid weld rods or S-761 Seam Adhesive
Maintenance Options
Polish
No Polish – Spray/Dry/No Buff
Packaging
Up to 82 ft. (25 m)
Width
6 ft. (1.83 m)
Shipping Weight
6.1 lbs./sq. yd. (3.3 kg/m2) – Medintone & Medintech
5.7 lbs./sq. yd. (3.1 kg/m2) – Medley
performance
Test method
Minimum requirement
performance vs.
requirement
Thickness
ASTM F 386
≥ 0.075 in.
Exceeds
Residual Indentation
ASTM F 1914
≤ 0.007 in.
Exceeds
Static Load Resistance (250 psi)
ASTM F 970
≤ 0.005 in.
Exceeds
Flexibility
ASTM F 137
1 1/2 in.
Exceeds
Chemical Resistance
ASTM F 925
No more than slight change in surface dulling,
attack or staining
Meets or Exceeds
Resistance to Heat
ASTM F 1514
ΔE ≤ 8
Exceeds
Resistance to Light
ASTM F 1515
ΔE ≤ 8
Exceeds
Fire Test Data – Flame Spread
ASTM E 648
0.45 W/cm2 or more, Class I
Meets
Fire Test Data – Smoke Evolution
ASTM E 662
450 or less
Meets
Fire Test Data – Canada
CAN/ULC S102.2
Use dependent
Flame Spread – 100
Smoke Developed – 280
Static Load Limit – Subjective Visual
ASTM F 970
No visually apparent indentation
750 psi
Certified Low Emitting Product
LEED® EQ4.3
Meets Guidelines
Meets
Certified Low Emitting Adhesive
LEED EQ4.1
Meets Guidelines
Meets
Plant Certification
ISO 14001
Meets Certification Guidelines
Certified
Indoor Air Quality
FloorScore™
Meets Certification Guidelines
Certified
Indoor Air Quality
CHPS 01350
Meets Certification Guidelines
Certified
Supplementary
ASTM F 1913
Roll Length
warranty
5-Year Commercial Warranty when installed in accordance with Armstrong’s Guaranteed Installation Systems manual, F-5061.
links
Installation Instructions – www.armstrong.com/pdbupimages/194608.pdf
Maintenance Information – www.armstrong.com/pdbupimages/197961.pdf
View the full line – www.armstrong.com/commflooringna/products/sheet
Email Techline – www.armstrong.com/commflooringna/contact_techline.jsp
www.armstrong.com/commercialflooring • 1 877 276 7876 ©2012 Armstrong World Industries, Inc.
MEDINTONE ™ | MEDINTECH ® | MEDLEY ®
Homogeneous Sheet
Sustainability Facts
Serving
As Served
Medintone | Medintech | Medley
Certified to meet leeD® eq Credit: Low Emitting Interiors
Adhesives
Certified to meet leeD eq Credit: Low Emitting Interiors
Floorscore™ Certified to CDPh standard
Method V1.1-2010
Collaborative for high Performance schools
CHPS-IEQ2.2 & LABS-21 IEQ4.3
ISO 14001 Plant Certification
U.s. green Building Council Member
Canada green Building Council Member
low Maintenance Option
UV-cured polyurethane
coating for low-maintenance
Filled jaspéd chips
Medintone
H8300
H8307
H8311
H8315
H8301
H8304
H8308
H8312
H8316
H8319
H8322
H8325
H8328
H8331
H8334
H8337
H8340
H8343
H8346
H8349
H8352
H8355
H8358
H8361
H8302
H8305
H8309
H8313
H8317
H8320
H8323
H8326
H8329
H8332
H8335
H8338
H8341
H8344
H8347
H8350
H8353
H8356
H8359
H8362
H8303
H8306
H8310
H8314
H8318
H8321
H8324
H8327
H8330
H8333
H8336
H8339
H8342
H8345
H8348
H8351
H8354
H8357
H8360
H8363
Medintech
Medley
H8689
88496
88474
88488
88495
88439
88432
88412
88455
88448
88450
88497
88486
88451
88441
88485
88476
88416
88419
H8644
H8686
H8683
H8645
H8646
H8648
H8675
H8673
H8614
H8613
H8690
H8626
H8628
H8624
H8634
H8633
H8692
H8681
H8665
H8647
H8660
H8674
H8672
H8612
H8615
H8691
H8627
H8625
H8620
H8636
H8635
www.armstrong.com/commercialflooring • 1 877 276 7876
©2012 Armstrong World Industries, Inc.
S-599 Premium Commercial Vinyl
Sheet Flooring Adhesive
! CAUTION
S-599 EYE AND SKIN IRRITANT
STIR WELL BEFORE USING.
For use with the following Installation Systems:
• Commercial Vinyl-Backed
• Commercial Heterogeneous and Inlaid
• Commercial Felt-Backed
DESCRIPTION:
Type:
Water-based resin
Color:
Creamy beige
Taggants:
Yes – blue glitter
Trowel:
S-891 Notched Steel Trowel or S-892 Replaceable Blade
Trowel; fine notch (1/32" deep, 1/16" wide, 5/64" apart),
U-notch
Coverage:
250–300 sq. ft./gallon (23-28 sq. m.)
Units:
1 gallon (3.78 L) and 4 gallons (15.14 L)
Open Time:
Porous substrates – Set-in-wet: Minimum 10-20 minutes
Nonporous substrates – Dry-to-touch: 30 minutes or more
Working Time:
Up to 1 hour (working times may vary based on job
conditions, temperature, humidity, air circulation, etc.)
Shelf Life:
2 years, unopened
Freeze/Thaw Stable: Yes, to 10° F (-12° C)
VOC Content:
< 14 g/L; calculated and reported, SCAQMD 1168
Clean Up:
Wet – clean, white cloth with neutral detergent and water
Dry – clean, white cloth and mineral spirits
Subfloors:
All grade levels of concrete, existing resilient floors,
ceramic, terrazzo, marble, steel, stainless steel, aluminum,
polymeric poured floors and suspended wood
Radiant Heated subfloors where the surface temperature
does not exceed 85° F (29° C)
Chapter V — Adhesives, Seam Treatments and Grout
5. 23
S-599 Premium Commercial Vinyl
Sheet Flooring Adhesive
! CAUTION
S-599 EYE AND SKIN IRRITANT
STIR WELL BEFORE USING.
For use with the following Installation Systems:
• Commercial Vinyl-Backed
• Commercial Heterogeneous and Inlaid
• Commercial Felt-Backed
DESCRIPTION:
Type:
Water-based resin
Color:
Creamy beige
Taggants:
Yes – blue glitter
Trowel:
S-891 Notched Steel Trowel or S-892 Replaceable Blade
Trowel; fine notch (1/32" deep, 1/16" wide, 5/64" apart),
U-notch
Coverage:
250–300 sq. ft./gallon (23-28 sq. m.)
Units:
1 gallon (3.78 L) and 4 gallons (15.14 L)
Open Time:
Porous substrates – Set-in-wet: Minimum 10-20 minutes
Nonporous substrates – Dry-to-touch: 30 minutes or more
Working Time:
Up to 1 hour (working times may vary based on job
conditions, temperature, humidity, air circulation, etc.)
Shelf Life:
2 years, unopened
Freeze/Thaw Stable: Yes, to 10° F (-12° C)
VOC Content:
< 14 g/L; calculated and reported, SCAQMD 1168
Clean Up:
Wet – clean, white cloth with neutral detergent and water
Dry – clean, white cloth and mineral spirits
Subfloors:
All grade levels of concrete, existing resilient floors,
ceramic, terrazzo, marble, steel, stainless steel, aluminum,
polymeric poured floors and suspended wood
Radiant Heated subfloors where the surface temperature
does not exceed 85° F (29° C)
Chapter V — Adhesives, Seam Treatments and Grout
5. 23
MATERIAL SAFETY DATA SHEET
I. PRODUCT IDENTIFICATION
Name: Armstrong S-599 Premium Vinyl-Backed Flooring Adhesive
Description: Water Based Adhesive
II. DEPARTMENT OF TRANSPORTATION INFORMATION
Shipping name: Not classified Hazard Class: DOT Non-hazardous
ID #: N/A Packing Inst.: N/A DOT/IMO/IATA: N/A
Common Carrier NMSFC#: N/A
EMERGENCY ONLY CONTACT: CHEM-TEL 800-255-3924
S-599
Prepared 06/12
III. HMIS (0=minimal hazard; 4 = severe hazard)
Health = 1 Flammability = 0 Reactivity = 0
Armstrong World Industries, Inc.
P. O. Box 3001
Lancaster, PA 17604
www.armstrong.com
MSDS Requests: www.floorexpert.com
Technical Services
IV. PRODUCT CONTENT
This product does not contain chemicals subject to the reporting
requirements of Section 313 of SARA Title III and 40 CFR 372. All
components are on TSCA inventory. This product does NOT contain
asbestos.
V. HAZARDOUS INGREDIENTS
(Chemical Identity; Common Name)
None
1-877-276-7876, Option 2, 3, and 3
C.A.S. No.
%
OSHA PEL
ACGIH TLV
N/A
N/A
N/A
N/A
VI. PHYSICAL DATA
APPEARANCE AND COLOR: Yellow. ODOR: Mild.
BOILING POINT (degrees F): N/K. VAPOR PRESSURE: Low.
VAPOR DENSITY: Low. SOLUBILITY IN WATER: Miscible.
DENSITY: 8.3 – 8.6 lbs/gal. EVAPORATION RATE: N/A.
o
o
VOC: Less than 14 g/l calculated at 70 F/21 C, SCAQMD.
VII. FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: N/A. FLAMMABLE LIMITS IN AIR, 5 BY
VOLUME: LEL = N/A; UEL = N/A. EXTINGUISHING MEDIA:
Water spray, carbon dioxide, foam or dry chemical. SPECIAL
FIRE FIGHTING ROCEDURES: Protect fire fighters from toxic
products of combustion by wearing self-contained breathing
apparatus.
VIII. HEALTH HAZARD DATA
PRIMARY ROUTES OF ENTRY: Skin, eyes. TARGET
ORGANS: N/A. EFFECTS OF OVEREXPOSURE: SKIN
AND EYES: Avoid skin and eye contact. May produce
irritation to eyes and skin. INHALATION: May cause slight
irritation to the upper respiratory tract. CARCINOGENICITY:
NTP: No. IARC Monographs: No. OSHA Regulated: No.
FIRST AID PROCEDURES: EYES AND SKIN: Upon eye
contact, flush eyes with water for at least 15 minutes. Upon
skin contact, wash with soap and water. Refer to a physician if
irritation or symptoms persist. INHALATION: Move person to
fresh air. Refer to a physician if irritation or symptoms persist.
IX. REACTIVITY DATA
STABILITY: Stable. INCOMPATIBILITY: Metal salts may
coagulate this product. HAZARDOUS DECOMPOSITION
PRODUCTS: Carbon monoxide, carbon dioxide, and other
toxic vapors and gases that are common to thermal
degradation of organic compounds. HAZARDOUS
POLYMERIZATION: Will not occur.
X. SPILL OR LEAK PROCEDURES
SPILL OR LEAK HANDLING: Keep out of sewer systems.
Use absorbent and scrape up to collect. Place into closed
containers for disposal. WASTE DISPOSAL METHOD: Do not
reuse container. Dispose of container and any unused
contents in accordance with Federal, State and Local Waste
Disposal Regulations. Do not flush unused contents or residue
down drains.
XI. SPECIAL HANDLING AND USE INFORMATION
VENTILATION: Local Exhaust / normal ambient ventilation
should be sufficient. Open doors and windows to provide
cross-ventilation if necessary. RESPIRATORY PROTECTION:
With adequate ventilation, respiratory equipment should not be
needed. SKIN AND EYE PROTECTION: It is always a good
safety practice to avoid contact with eyes and prolonged
contact with skin. If contact may occur, use spectacle-type
glasses and latex or rubber gloves.
XII. SPECIAL PRECAUTIONS
PRECAUTIONS TO BE TAKEN IN HANDLING AND
STORAGE: Keep from freezing. Recommended storage
temperature is between 50 to 90 degrees F. OTHER
PRECAUTIONS: None. WORK SITE ENVIRONMENT: Initially
there may be a potential adverse impact on indoor air quality
within the general work area during the installation process.
Therefore you should advise the building manager or other
appropriate person that:
• It will be necessary to establish and maintain adequate
ventilation of the work area, without causing the entry of
contaminants to other parts of the building; and • Persons who
are sensitive to odors and/or chemicals should be advised to
avoid the work area during this process.
The information presented herein is supplied as a guide to
those who handle or use this product. Safe work practices
must be employed when working with any materials. It is
important that the end user makes a determination regarding
the adequacy of the safety procedures employed during the
use of this product.
N/A - not applicable or not available
N/K - none known or not known
Advantages:
For Full Spread and Perimeter Plus systems
Moisture and alkali resistant
Strong, early grab
AGIS Guarantee
Nonflammable, ammonia-free, and low odor
Contains low or no organic solvents
5. 24
Chapter V — Adhesives, Seam Treatments and Grout
Advantages:
For Full Spread and Perimeter Plus systems
Moisture and alkali resistant
Strong, early grab
AGIS Guarantee
Nonflammable, ammonia-free, and low odor
Contains low or no organic solvents
5. 24
Chapter V — Adhesives, Seam Treatments and Grout